Valve Tenders

Description: Valve Diaphragm 1.00 Springless, As Per Loram Part No: 159713, As Per United Air Specialists Usa Part No. Turbo Srl 07.10002.001 Acceptable Make: Loram, United Air Specialists Usa.

Description: Kit Overhauling For Magnet Valve.

Description: A) Tna - Operation And Maintenance Of Water Supply Valves In Pump Rooms, Storage Tanks And Distribution Of Water Supply For 24 Months Under Jurisdiction Of Sse(w)tna

Description: CATEGORY: VALVE CONE, BHEL , VALVE SEAT, 01122256000&2, BHEL

Details: Owner: St. Charles Parish Project Title: River Oaks Lift Station Replacement Project No.: S230501 Principal Work Location: West Bank Of The Parish Near 430 River Oaks Dr. Description Of Basic Work: 1. Construction Of A New Duplex Submersible Sewerage Pumping Station, Complete With Pumps, Piping, Valves, And Electrical Appurtenances. 2. Construction Of Interconnecting Gravity Sewerage And Forced Sewerage Main Piping. 3. Roadway Restoration. 4. Demolition Of The Existing Pumping Equipment And Backfilling Of The Existing Steel Dry Pit Structure. 5. Appurtenant Civil, Structural, Mechanical, And Electrical Construction. Bids: Separate Sealed Bids Will Be Received By The St. Charles Parish Council Records Office, Parish Of St. Charles, 15045 River Road, Courthouse 3rd Floor, Hahnville, Louisiana, 70057, Either By Registered Or Certified Mail With Return Receipt Requested, Or Hand Delivered, Or Electronically Submitted At Www.centralbidding.com, No Later Than 11 A.m. Local Time On March 20, 2025. Promptly Thereafter, The Bids Will Be Publicly Opened And Read Aloud In The Council Chambers Of The St. Charles Parish Court House. The Owner Reserves The Right To Reject Any And All Bids In Accordance With The Public Bid Law, And To Disregard All Nonconforming, Nonresponsive, Unbalanced Or Conditional Bids. Bidding Documents: The Bidding Documents (contract Documents, Specifications And Drawings) Are Available In Adobe Portable Document Format (.pdf) Only To Contractors Who Are Properly Licensed In Louisiana Or To Bona Fide Suppliers Of Materials And Equipment For Purchase And/or Review At The Office Of The Engineer For The Contract, Fairway Consulting + Engineering, Llc; 827 W. 22nd Ave., Covington, Louisiana 70433. Pre?bid Conference: A Pre?bid Conference To Discuss The Scope Of The Project And The Requirements Of The Bidding And Contract Documents Will Be Held On February 25, 2025 At 10 A.m. The St. Charles Parish Department Of Public Works And Wastewater, 100 River Oaks Dr., Destrehan, Louisiana. Attendance Of The Pre-bid Conference Is Non-mandatory. Each Bidder Must Deposit With His/her Bid, Security In The Amount Equal To Five Percent (5%) Of The Total Bid In The Form Of A Certified Check, Cashier’s Check Or Bid Bond. If The Bid Is Submitted Electronically And A Certified Or Cashier’s Check Is Used For Bid Bond, Then The Actual Check Shall Be Delivered To The St. Charles Parish Council Records Office, Parish Of St. Charles, 15045 River Road, Courthouse 3rd Floor, Hahnville, Louisiana, 70057. Electronic Bids Shall Contain All The Same Documents That Are Required In A Physically Delivered Bid. The Outside Of The Bid Envelope Must Contain The Submitting Firm’s Name, Louisiana Contractors License Number, The St. Charles Parish Project Number, And The St. Charles Parish Project Title. St. Charles Parish Is An Equal Opportunity Employer. We Encourage All Small And Minority-owned Firms And Women’s Business Enterprises To Participate In This Solicitation. Any Person With Disabilities Requiring Special Accommodations Must Contact The St. Charles Parish Council Office At 985-783-5000 No Later Than Seven (7) Days Prior To Bid Opening. St. Charles Parish Council Hon. Matthew Jewell, Parish President Advertisement Source And Dates: St. Charles Herald Guide St. Charles Parish Website Central Auction House The Daily Journal Of Commerce The Times-picayune/the New Orleans Advocate Mcgraw-hill Dodge Of Hot Springs Construct Connect Thursday, February 06, 2025 Thursday, February 13, 2025 Thursday, February 20, 2025

Description: CATEGORY: Custom Bid for Services - 200141187Proposal for Servicing Insitu Repair of Boiler Main Steam Stop Valves in 500MW units at NTPCVSTPS

Description: CATEGORY: providing and fixing ball valve brass of approved quality high or lowpressure with plastic float complete 15mm nominal bore , providing and fixing ball valve brass of approved quality high or lowpressure with plastic float complete 20mm nominal bore , providing and fixing ball valve brass of approved quality high or lowpressure with plastic float complete 25mm nominal bore , providing and placing on terrace , providing and fixing CI sluice valves with cap complete with bolts nuts rubber insertions etc the tail pieces if required will be paid separately 100mm diameter class two , providing and fixing CI sluice valves with cap complete with bolts nuts rubber insertions etc the tail pieces if required will be paid separately 150mm diameter class two

Description: Kit Of Spares For Triple Valve Stabilising Valve Comprising Of 04 Items Etc.

Description: Kit For D2 Relay Valve

Description: Contract notice - General guideline, standard regulation, open procedure (construction work) Lot 2.5 - Compressed air technology and pre-ventilation, filtration, supply and installation of: - 1 pre-ventilation blower as a rotary piston blower 450 M³/h at 250 Mbar - 1 thermal mass flow measurement - ... MoreLot 2.5 - Compressed air technology and pre-ventilation, filtration, supply and installation of: - 1 pre-ventilation blower as a rotary piston blower 450 M³/h at 250 Mbar - 1 thermal mass flow measurement - 2 piston compressor systems with integrated working pressure reservoir 150 L/min at 8 bar - Compressed air preparation consisting of a coalescence filter, refrigeration dryer and adsorption dryer - 17 valve islands in wall cabinets - Aeration system for approx. 280 m² inlet channel - Approx. 750 m polyamide control air line - approx. 300 m stainless steel line with press fittings - approx. 150 m welded stainless steel line and the associated - functional test/commissioning/trial operation - engineering project management lot 2.5 - compressed air technology and pre-ventilation, filtration delivery and installation of: - 1 pre-ventilation blower as rotary piston blower 450 M³/h at 250 Mbar - 1 thermal mass flow measurement - 2 piston compressor systems with integrated working pressure storage 150 L/min at 8 bar - compressed air preparation consisting of coalescence filter, refrigeration dryer and adsorption dryer - 17 valve islands in wall cabinets - aeration system for approx. 280 m² inlet channel - approx. 750 m polyamide control air line - approx. 300 m stainless steel line with press fittings - approx. 150 m Welded stainless steel pipe and associated - functional testing/commissioning/trial operation - engineering project management