Valve Tenders

Details: City Of Chester Water System Improvements City Of Chester, Chester, Hancock County, West Virginia The U.s. Army Corps Of Engineers, Pittsburgh District, Is Carrying Out A Project To Rehabilitate Portions Of The City Of Chester?s Water Treatment Plant And Water Distribution System At The Location Referenced Above. The Major Features Of The Project Generally Involves The Following: 1. Water Treatment Plant Equipment Improvements Which Will Include The Following Work, In General: ? Improvements To The Existing Filter Tanks Including The Removal And Replacement Of The Filter Tank Media; Removal And Replacement Of The Access Manways. ? Removal And Replacement Of Actuated And Manual Valves Including A New Control System For The Actuated Valves. ? Removal And Replacement Of The Existing Exterior Backwash Tank. ? Removal And Replacement Of The Existing Site Sanitary Lift Station. ? Cleaning And Video Inspection Of The Existing Raw Water Intake Pipe/structure. ? The Necessary Permit For The Aforementioned Improvements Has Been Obtained From The West Virginia Department Of Health And Human Resources - Office Of Environmental Health Services. ? The Necessary Permit For The Aforementioned Improvements Has Been Obtained From The West Virginia State Fire Marshal?s Office. ? There Were No Findings Of Lead, Asbestos, Or Other Related Materials Within The Interior Of The Water Treatment Plant Building. 2. Water Distribution Improvements Which Will Include The Following Work: ? Installation Of New Gate Valves At An Estimated (26) Different Locations Throughout The City?s Distribution System. ? The Necessary Permit For The Aforementioned Improvements Has Been Obtained From The West Virginia Department Of Health And Human Resources - Office Of Environmental Health Services. Water Treatment Plant Equipment And/or Site Improvements Will Be Performed Entirely Within City-owned Property; And Water Distribution Improvements Will Be Performed Entirely Within City Road Right-of-ways. Project Physical Construction Is Proposed To Take Place Between May 2025 And May 2026. Access For City Workers To City-owned Property (water Treatment Plant) Shall Be Maintained At All Times During Construction. All Vehicle Access Within City Road Right-of-ways Shall Be Maintained At All Times With The Proper Maintenance Of Traffic During Construction. Disposal Of Construction Waste Material Will Be Disposed Of At Commercially Permitted Facilities Licensed To Accept Waste Or Recyclable Materials As Applicable.the Work Shall Be Completed Within 330 Calendar Days After Written Notice To Proceed. Disclosure Of Magnitude Of Construction (far 36.204 And Dfars 236.204) Between $1,000,000 And $5,000,000the Acquisition Will Be Procured As 100% Set-aside For Small Business. The Resulting Award Will Be For One (1) Firm-fixed-price (ffp) Contract. All Responsible Bidders Are Encouraged To Participate. The Invitation For Bid (ifb) Will Be Issued On Or About 11:00am Et, 29 January 2025, Online Through Procurement Integrated Enterprise Environment (piee) Which Posts The Opportunity To Sam.gov; Therefore, Requests For Hardcopies Of The Solicitation Will Not Be Honored.the North American Industrial Classification System (naics) Code For This Acquisition Is 237110 - Water And Sewer Line And Related Structures Construction. The Small Business Size Standard For This Naics Code Is $45,000,000.00.in Order To Submit A Bid On This Project, Your Company Must-1) be Registered In System For Award Management (sam) And Maintain An Active Registration Status. 2) be Registered In The Procurement Integrated Enterprise Environment (piee) For The Solicitation Module With The Proposal Manager Manger Role. System For Award Management (sam) Registrationregistering In Sam.gov Includes Both Entity Validation And Entity Registration.to Register In Sam:a. navigate To Sam.govb. select Sign-in (top Right)c. select Create An Account Then Follow The Instructions. D. after Account Is Set-up, Select Sign In.e. under The Entity Management Widget, Select ?get Started? Button. F. select Register Entity. As Part Of Entity Registration, A Unique Entity Id Will Be Assigned.for Additional Information On Samto Register Your Entity (company), Please Visit Https:/www.fsd.gov/gsafsd_sp?id=gsa_index . Here You Will Find The Following, get Started With Your Registration check Registration Status ? Active, Inactive, Pending update Your Registration become An Entity Administrator validate Your Entity *access User Guides *by Selecting This Option, You Can Obtain A Quick Start Guide For Contract Registrations.also, Here You Will Find In Addition To The User Guides - Faqs, Videos, And Definitions.please Noteit Is Mandatory That All Companies Be Registered In Sam In Order To Receive Federal Contracts.there Is No Charge To Register Or Maintain Your Company (entity) Registration.login.gov Manages Usernames And Passwords For Sam.gov. *important* Registration Informationregistration Can Take At Least Ten (10) Business Days To Be Active In Sam.gov.registration Must Be In Active Status Upon Offer Submission And Remain Active During Award Period.registration Must Be Renewed Every 365 Days To Remain Active.the Federal Service Desk (fsd) For Sam Questions, May Be Contacted. Phone Number: 866-606-8220hours Of Operation: Monday-friday 8 A.m. To 8 P.m. Etprocurement Integrated Enterprise Environment (piee) Solicitation Module Registrationto Register For Piee Follow The Below Instructions. Register In Piee:a. Navigate To Https://piee.eb.mil/b. Select Register [top Right]c. Select Vendord. Create A User Id And Password And Follow The Prompts [next]e. Create Security Questions [next]f. Complete Your User Profile Information [next]g. Complete Your Supervisor Or Approving Official Information [next]h. Complete Rolesi. Step 1. Select Sol-solicitationii. Step 2. Select Proposal Manageriii. Step 3. Click Add Rolesiv. Step 4. Fill In Your Location Code (cage Code) [next]i. Provide A Justification For Your Registration [next]j. Follow The Remaining Prompts To Submit Your Registrationthe Procurement Integrated Enterprise Environment (piee) Help Desk May Be Reached By Calling Telephone Number 866-618-5988 For Assistance. **notice** Information Regarding The U.s. Army Corps Of Engineers Process For Settling Requests For Equitable Adjustments And Duration Goals To Achieve Definitization Of Equitable Adjustments For Change Orders Under Construction Contracts Can Be Found By Going To Https://www.usace.army.mil/business-with-us/partnering/ Then Clicking On ?view Ffp Contract Changes Playbook Here?. 6 March 2025 - Amendment 0001 Posted

Details: Supply & Laying of Distribution pipe line (HDPE PE 100, PN 6) of All types & Classes, including supplying and fixing of ISI marked all types of fittings / specials relevant to pipe materials conforming to relevant IS Codes with necessary jointing material rubber gasket including supply of all types of necessary valves with valve chamber, air valve etc for Water Supply with all other associated Works including permanent Road Restoration for 11.00 Km at Zone-2, for Raniganj area".

Details: Supply & Laying of Distribution pipe line (D.I. K-7 / HDPE PE 100, PN 6 / M.S Pipes) of All types & Classes, including supplying and fixing of ISI marked all types of fittings / specials relevant to pipe materials conforming to relevant IS Codes with necessary jointing material rubber gasket including supply of all types of necessary valves with valve chamber, air valve etc for Water Supply with all other associated Works including permanent Road Restoration for 5.84 Km Zone 10, Zone-15 & Zone-18 for Kulti area".

Description: Lot No.p.nfb-4.bin No-13 & 11. Exmp.01.2024-25.04, Description- Scrap Bronze, Phosphorous Bronze And Other Bronze Scrap Including Suspension Bearing With Or Without White Metal , Bronze Boring Drilling (all Type Of Bronze Boring Mixed With White Metal &ferrous Boring). Our Offer:- A) Scrap Brass Misc.with Or Without Iron Attachment. Such As:- Brass Spares Block, C Block, Three Way Clock, Holder For Reserver/ctf, Hand Cutting Blow Pipe With Iron, Flute, Pressur Regulator, Nozzle Lpg, Top Bush,torch Light, Brass Nozzle, G.m Ball Valve, P.g Clamp, Rt Hook Clamp, Contact Clip, Swival Clip, Brass Block For J & Ctf Splice For Catenery Wire And Other Misc. Brass. In Bin No-13 Qty=2160 Kgs. B) Scrap Wearing Pieces (p.b) In Bin No-11. Qty= 2934 Kgs. Loading Will Be Done By Purchaser's Own Arrangement.

Description: Allocation No.06091499.on As Is Where Is Basis. Iron And Steel Cut-up Parts Of Condemned Wagons Bearing No. [1]cr-30018804635,type-bcnm1, [2] Ser-30078760438,type-bcnm1, [3]cr-30018703860,type-bcnm1 , [4] Nr-30038809382,type-bcnm1, [5] Er-30028760044,type-bcnm1, [6] Cr-30018828686, Type- Bcnm1, [7] Cr-30018805434,type- Bcnm1, [8] Cr-30018703556,type-bcnm1, [9] Cr-30018713494, Type-bcnm1, [10] Cr-30018712275,type-bcnm1, [11]ser-10079379686,type-boxnm1, [12]ser-10079361780,type-boxnm1, [13]ser-25079360039,type-boxnr, [14]ser-10079391473,type-boxnm1 , [15] Ser-10079391268,type-boxnm1, [16] Cr-30018763208,type-bcnm1. Total Qty-16nos. Location-lying At Triangular/yard/hlr Under Custody Of Sse/c&w/ic/nh. To Be Sold Without Excluded Fittings Viz [1] Wheel Set With Axle (one No. Wheel Set With Axle Consisting Of Two Wheel Disc & One Axle)-[04nos For Each Wagons], [2] Ctrb-[08nos. For Each Wagons], [3]bogie-(cusnub 22 Nlb)-[ 02nos For Sl-1 To 15 & Nil For Sl-16], [4] Brake Cylinder-[01no. For Each Except Sl-13], [5]draft Gear-[02nos For Each Wagons], [6] Coupler Body-[02nos. For Each Wagons], [7] Yoke-[02nos. For Each Wagons], [8] Yoke Pin-[02nos. For Each Wagons], [9]yoke Supporting Plate-[02nos. For Each Wagons], [10]yoke Pin Support Plate-[02nos. For Each Wagons], [11]all Sorts Of Bolster Springs-[ For Each Wagons], [12]distributor Valve (ci)-[01no. For Sl-1,2,3,4,9,10,15 & Nil For Sl-5,6,7,8,11,12,13,14,16 [13] Anchor Plate With Safety Plate-[02nos. For Each Wagons], [14] Brake Beam Complete For Casnub Bogie-[04nos. For Sl-1 To13,02 No. For Sl-14,16 & Nil For Sl-15], [15] Equalizing Lever With Bushes-[04nos. For Sl-1 To13,02 No. For Sl-14,16 & Nil For Sl-15], [16]bogie Brake Push Rod-[02nos. For Sl-1 To13,01 No. For Sl-14,16 & Nil For Sl-15], [17] Knuckle-[02nos. For Each Wagons], [18]hand Brake Wheel-[02nos. For Sl-1 To 8,16 & 01no. For Sl-9,10,13,14,15, Nil For Sl-11,12]. Nb- (apm-not Included As A Excluded Items As This Items Is Not Fitted In The Aforesaid Wagons). After Sale, Wagons Will Be Handed Over To The Purchaser For Dismantling And Cutting At Triangular/yard/ Hlr. Cutting And Dismantling Of Wagons Are To Be Made At Triangular/yard/hlr By Purchasers Own Arrangement After Ensuring Sufficient Safety Measures Against Fire Hazards. Returnable Items Of Sold Wagons Are To Be Returned To The Custodian Before Delivery. Nb-bogies (02nos.) Not Included In The Excluded Items Of Wagons No.cr-30018763208 (sl-16) As This Wagon Is Fitted With Casnub 22w(m) Bogies With Wide Horn Which Are No Longer In Use In Any Of The Current Design Wagon Vide Edme/frt/rly Bd¿s L/no.2018/m(n)/ 60/4 Dt.14.11.2019 & This Wagon Should Be Sold & Disposed With Bogies.

Description: CATEGORY: Lathe Machine , Geared Shaping Machine , Power Hacksaw Machine , Heavy Duty Drilling Machine , Portable Hand Drilling Machine , Bench Grinders , Angle Grinders 7inch , Angle Grinders 4inch , Welding Transformer , Set of Mandatory Spares , Set of Erection and Commissioning Spares , Third Party Inspection Charges , InstallationTraining for Operation , Motor Test Bench with DB Panel , Control Valve Test Bench

Description: Control Valve

Description: CATEGORY: ITEM - 10 - M6807206023 - 100246685 - SPARE DELUGE VALVES

Description: Allocation No.06091499.on As Is Where Is Basis. Iron And Steel Cut-up Parts Of Condemned Wagons Bearing No. [1] Scr-25099360279,type-boxnr, [2] Ser-25079360480,type-boxnr, [3]cr-30018721116,type-bcnm1, [4] Ser-10079363050,type-boxnm1, [5] Cr-10019360330,type-boxnm1, [6] Cr-10019134979,type-boxnm1, [7] Cr-30018702863,type-bcnm1, [8] Ser-10079381696,type-boxnm1, [9] Ser-10079265569,type-boxnr. Total Qty-09nos. Location-lying At Triangular/yard/hlr Under Custody Of Sse/c&w/ic/nh. To Be Sold Without Excluded Fittings Viz [1] Wheel Set With Axle-04nos. (one No. Wheel Set With Axle Consisting Of Two Wheel Disc & One Axle)-[04nos For Each Wagons], [2] Ctrb-[08nos. For Each Wagons], [3]bogie-[02nos(cusnub 22 Nlb) For Sl-1 To 8 & Nil For Sl-9], [4] Brake Cylinder-[01no. For Each Wagons], [5]draft Gear-[02nos. For Each Wagons], [6] Coupler Body-[02nos. For Each Wagons], [7] Yoke-[02nos. For Each Wagons], [8] Yoke Pin-[02nos. For Each Wagons], [9] Yoke Supporting Plate-[02nos. For Each Wagons], [10]yoke Pin Support Plate-[02nos. For Each Wagons], [11] All Sorts Of Bolster Springs-[ For Each Wagons], [12]distributor Valve (ci)-[01no. For Each Wagons], [13] Slack Adjuster-[01no. For Each Wagons], [14]anchor Plate With Safety Plate-[02nos. For Each Wagons], [15] Brake Beam Complete For Casnub Bogie-[04nos. For Each Wagons], [16] Equalizing Lever With Bushes-[04nos. For Each Wagons ], [17]bogie Brake Push Rod-[02nos. For Each Wagons], [18] Knuckle-[02nos. For Each Wagons],[19] Hand Brake Wheel-[01no. For Sl-7,8 & Nil For 1 To 6 & 9] Nb:(apm-not Included As A Excluded Items As This Items Is Not Fitted In The Aforesaid Wagons And Hand Brake Wheel-02nos.for Sl-1 To 6 &9 And 01 No. For Sl7&8 Deficient The Aforesaid Wagons). After Sale, Wagons Will Be Handed Over To The Purchaser For Dismantling And Cutting At Triangular/yard/hlr. Cutting And Dismantling Of Wagons Are To Be Made At Triangular/yard/hlr By Purchasers Own Arrangement After Ensuring Sufficient Safety Measures Against Fire Hazards. Returnable Items Of Sold Wagons Are To Be Returned To The Custodian Before Delivery. Nb-3:bogies (02nos.) Not Included In The Excluded Items Of Wagon Sl No.-9(ser-10079265569) As This Wagon Is Fitted With Casnub 22w(m) Bogies With Wide Horn Which Are No Longer In Use In Any Of The Current Design Wagon Vide Edme/frt/rly Bd¿s L/no.2018/m(n)/ 60/4 Dt.14.11.2019 & This Wagon Should Be Sold & Disposed With Bogies.

Description: Scrap Ferrous Cast Iron Consisting Of Pipes, Weiging Machine & Its Parts,plate, Pully, Pump/ Machine Casing,tappet, Sluice Valve,c.i. Band, Cylinder Linner & Head,brake Block ,cst -9 Sleeper With Or W/o Tie Bar,impeller, Sig- Gear & Parts, & Other Various Released Items From Loco, Carriage, Trd, Electric,sig, P.way Of Sorts & Sizes With Steel Ferrius & Neg.n.f.attachment If Any. Note- 1- L.b.p. 2- Hammering / Cutting Allowed For Removal Of Concrete,sediment,soil,etc At The Time Of Delivery. Location: Lying In Bin No A-03 Near L/n-10