University Of The Philippines Tender

Description Supply Of Various Laboratory Equipment For The Project Entitled, Project 2 Establishment Of Pharmaceutical Sciences Services For Clinical Research (2) Analytical Balance General Specifications Capacity: At Least 200 G Readability: 0.1 Mg With Lcd Display Weighing Pan Diameter: 80 To 100 Mm With Calibration Capabilities Inclusions: At Least 2-meter Power Cable Dust Cover And De-duster Protective Cover Calibration Weights Terms And Conditions: 1. The Equipment Must Be Delivered Within 60-90 Calendar Days After The Issuance Of Notice To Proceed. 2. All Parts Of The Equipment And Its Accessories (e.g., Draft Shields, Weighing Boats, And Weighing Papers, If Applicable) Must Be Identified By Part Number Or Accessory Number 3. Provision Of Operator’s And Service Manual (in English) Upon Delivery. 4. Calibration Of The Equipment And Initial Operation By Service Engineer 5. Qualified Service Engineer Must Perform Installation Qualification (iq) And Operational Qualification (oq) With Documentation And Report 6. Operations And Service Manual Must Be Provided 7. Relocation And Re-installation Of Equipment Within The Up Manila Area Within The Warranty Period With Subsequent Performance Of Installation Qualification (iq) And Operational Qualification (oq) With Documentation And Report. 8. Local Training Of At Least 2 End-user (personnel) To Operate, Troubleshoot And Maintain Equipment 9. Warranty, Parts, And Preventive Maintenance For At Least Two (2) Years 10. Provision Of Free Accessories/consumables, If Applicable 11. Certification/guarantee On Availability Of Parts, Accessories, Supplies Including Software For The Next 10 Years Or More 12. Warranty Period Shall Commence From The Date Of Acceptance By The End-user After Installation, Testing And Commissioning 13. Annual Or Bi-annual Preventive Maintenance From The Distributor's Qualified Technician During The Warranty Period 14. Availability Of Trained Service Engineers With Guaranteed Uptime Within 48 Hours For Troubleshooting And Repair Of Unit Even After The Warranty Period. (1) Automated Standard Solubility System General Specifications 1) Solid/powder Dispensing A) Automated Powder Dispensing System B) At Least Eight (8) Reusable Dispense Heads (preferably Stainless Steel) C) Capable Of Multiple Mass Dispenses D) With At Least One (1) Dial Plate (including Stainless Steel Inserts) Or Its Equivalent That Can Hold 20 Ml Vials E) With Bluetooth And Usb Connectivity F) With Tablet Pc And Software Specifications: Capacity At Least 20 Vials Mass Range > 1 Mg Mass Precision ± 10 Μg Mass Accuracy > 2% Balance Repeatability ± 2 Μg Data Entry Tablet Pc Data Output Csv Data File Connectivity Bluetooth And Usb Power 220v 2) Liquid Dispensing A) Automated Liquid Dispensing System B) Capable Of Dispensing Multiple Volumes Of Liquid C) With Pc And Network Connectivity/capability D) With Uninterrupted Power Supply Specifications: Operating Temperature 20°c-37°c Imaging System Hand: High Resolution Camera Equipped With White Led Light High Resolution Camera Equipped With Low Power White Led And Class Ii Red Laser (wavelength = 650 Nm) Operating Humidity Maximum Relative Humidity 80% For Temperatures Up To 37° C. Required Personal Computer Characteristics Computer Equipped With Internet Browser And Network Capability. Working Space With Dynamically Configurable Working Space Set-up For Experiment Requirements. 3) Mixing/shaking Capabilities A) Shaker Incubator Or Equivalent With: I) Temperature Control From 15ºc To 60ºc Ii) Rotation Of At Least 0 To 1000 Rotation Per Minute 4) Centrifugation Capabilities A) Mini Centrifuge With Adaptor: I) Rotors With Adapters For 1.5 Ml And 2 Ml Inclusions A) Laboratory Table/set-up B) Computer Pc C) Single Channel Pipettor For 50-1000ul, 100-5000ul, 500-10000ul D) Tips I) At Least Three (3) Pack Each Of Tips For 50-1000ul, 100-5000ul, 500-10000ul E) Racks I) At Least One (1) 20 Ml Tube Rack Ii) At Least One (1) 20 Ml Tube Shaker-heater Rack Iii) At Least One (1) 250 Ml Duran Bottle Rack Iv) At Least One (1) 2 Ml Hplc Vial Rack V) At Least One (1) Tip Rack Each For 50-1000ul, 100-5000ul, And 500-10000ul F) Vials/tubes I) At Least Two (2) Packs (100 Piece Per Pack) Standard 2 Ml Sample Vials With Caps. Ii) At Least Three (3) Packs (50 Piece Per Pack) Standard 20 Ml Sample Vials With Caps. Iii) At Least Three (3) Packs (50 Piece Per Pack) Standard 1.5 Ml Centrifuge Tubes. Iv) At Least Three (3) Packs (50 Piece Per Pack) Standard 2 Ml Centrifuge Tubes. G) With Extraction Pump And Manifold H) With Extraction Cartridge Kit (6cc) Terms And Conditions: 1. The Equipment Must Be Delivered Within 60-90 Calendar Days After The Issuance Of Notice To Proceed. 2. All Parts Of The Equipment And Its Accessories Must Be Identified By Part Number Or Accessory Number 3. Provision Of Operator’s And Service Manual (in English) Upon Delivery. 4. Installation And Calibration Of The Equipment And Initial Operation By Service Engineer 5. Qualified Service Engineer Must Perform Installation Qualification (iq) And Operational Qualification (oq) With Documentation And Report 6. Operations And Service Manual Must Be Provided 7. Relocation And Re-installation Of Equipment Within The Up Manila Area Within The Warranty Period With Subsequent Performance Of Installation Qualification (iq) And Operational Qualification (oq) With Documentation And Report. 8. Local Training Of At Least 2 End-user (personnel) To Operate, Troubleshoot And Maintain Equipment 9. Warranty, Parts, And Preventive Maintenance For At Least Two (2) Years 10. Provision Of Free Accessories/consumables, If Applicable 11. Certification/guarantee On Availability Of Parts, Accessories, Supplies Including Software For The Next 10 Years Or More 12. Warranty Period Shall Commence From The Date Of Acceptance By The End-user After Installation, Testing And Commissioning 13. Bi-annual Preventive Maintenance From The Distributor's Qualified Technician During The Warranty Period. 14. Availability Of Trained Service Engineers With Guaranteed Uptime Within 48 Hours For Troubleshooting And Repair Of Unit Even After The Warranty Period (1) Chemical Fumehood General Specifications Internal Size/dimension (w*d*h) = W (1200 To 1250) X D (550 To 600) X H (650 To 700) Mm Tri-wall Construction And Chain-and-sprocket Sash System Internal Chamber Constructed Of 316 Stainless Steel With Coved Corners Chemical Resistant Ceramic Worktop Perforated Lower Baffle System Preferably With Activated Carbon Filter Of The Hood. Must Comply With Denr Dao-98-63 Standards For Safety And Environmental Impact. Terms And Conditions: 1. The Equipment Must Be Delivered Within 60-90 Calendar Days After The Issuance Of Notice To Proceed. 2. All Parts Of The Equipment And Its Accessories Must Be Identified By Part Number Or Accessory Number 3. Provision Of Operator’s And Service Manual (in English) Upon Delivery. 4. Installation And Calibration Of The Equipment And Initial Operation By Service Engineer 5. Qualified Service Engineer Must Perform Installation Qualification (iq) And Operational Qualification (oq) With Documentation And Report 6. Operations And Service Manual Must Be Provided 7. Relocation And Re-installation Of Equipment Within The Up Manila Area Within The Warranty Period With Subsequent Performance Of Installation Qualification (iq) And Operational Qualification (oq) With Documentation And Report. 8. Local Training Of At Least 2 End-user (personnel) To Operate, Troubleshoot And Maintain Equipment 9. Warranty, Parts, And Preventive Maintenance For At Least Two (2) Years 10. Provision Of Free Accessories/consumables, If Applicable 11. Certification/guarantee On Availability Of Parts, Accessories, Supplies Including Software For The Next 10 Years Or More 12. Warranty Period Shall Commence From The Date Of Acceptance By The End-user After Installation, Testing And Commissioning 13. Annual Or Bi-annual Preventive Maintenance From The Distributor's Qualified Technician During The Warranty Period. 14. Availability Of Trained Service Engineers With Guaranteed Uptime Within 48 Hours For Troubleshooting And Repair Of Unit Even After The Warranty Period (1) Electrode Epithelia Tissue Voltmeter General Specifications With A Usb Drive At Least 32 Gb Used For Storage. Contain A Computer Program For Continuous Digital Monitoring Of A Target Insert. Have Usb Cable Have A Calibration Kit, 1000ω Test Resistor Have An A/c Power Cord And Charger Have A Foot Switch Tissue Sampling Frequency: 12.5 Hz Sample Averaging: 20 Samples Per Second Resistance Ranges: 0 To 10,000 Ω, 0 To 50,000 Ω, And 0 To 100,000 Ω +5% Auto Mode: 1 To 100,000 Ω Auto Current 2 Μa, 4 Μa, 10 Μa Resistance Resolution: 0.1 Ω (under 200 Ω); 1 Ω (over 200 Ω) Resistance Accuracy: 0.1 Ω (under 200 Ω), 1 Ω (over 200 Ω) 0.1%, And 100,000 Ω ± 2 Μa (to 105 Kω) Voltage Resolution: 0.001 V, 0.1 Mv Accuracy Resistance: 0.1 Ω (200 Ω); 1 Ω (above 200 Ω) Accuracy Voltage: ± 0.1 Mv Current Levels: 10,000 Ω ±10 Μa, 50,000 Ω ± 4 Μa, And 100,000 Ω ± 2 Μa Auto Mode 1 To 100,000 Ω Auto Current 2 Μa, 4 Μa, 10 Μa Display Update Rate: 0.5 Seconds Battery: 3.7v Li-ion 2500 Mah** Charging Period: 5.5 Hours (power Off); 6 Hours (run Time) Charge Current: 200 Ma Power Consumption: ~250 Ma Can Simultaneously Record Via Usb And Computer Terms And Conditions: 1. The Equipment Must Be Delivered Within 60-90 Calendar Days After The Issuance Of Notice To Proceed. 2. All Parts Of The Equipment And Its Accessories (e,g., Reference Electrode, Tissue Chamber) Must Be Identified By Part Number Or Accessory Number 3. Provision Of Operator’s And Service Manual (in English) Upon Delivery. 4. Calibration Of The Equipment And Initial Operation By Service Engineer 5. Qualified Service Engineer Must Perform Installation Qualification (iq) And Operational Qualification (oq) With Documentation And Report 6. Operations And Service Manual Must Be Provided 7. Demonstration To At Least 2 End-user (personnel) To Operate, Troubleshoot And Maintain Equipment 8. Warranty, Parts, And Preventive Maintenance For At Least Two (2) Years 9. Provision Of Free Accessories/consumables, If Applicable 10. Certification/guarantee On Availability Of Parts, Accessories, Supplies Including Software For The Next 10 Years Or More 11. Warranty Period Shall Commence From The Date Of Acceptance By The End-user After Installation, Testing And Commissioning 12. Annual Or Bi-annual Preventive Maintenance From The Distributor's Qualified Technician During The Warranty Period. 13. Availability Of Trained Service Engineers With Guaranteed Uptime Within 48 Hours For Troubleshooting And Repair Of Unit Even After The Warranty Period (1) Hemocytometer General Specifications Multiple Counting Mode Colored Touch Lcd Screen Hemocytometer With Calibration Terms And Conditions: 1. The Equipment Must Be Delivered Within 60-90 Calendar Days After The Issuance Of Notice To Proceed. 2. All Parts Of The Equipment And Its Accessories (e.g., Cover Slips And Kits, If Applicable) Must Be Identified By Part Number Or Accessory Number 3. Provision Of Operator’s And Service Manual (in English) Upon Delivery. 4. Calibration Of The Equipment And Initial Operation By Service Engineer 5. Qualified Service Engineer Must Perform Installation Qualification (iq) And Operational Qualification (oq) With Documentation And Report 6. Operations And Service Manual Must Be Provided 7. Relocation And Re-installation Of Equipment Within The Up Manila Area Within The Warranty Period With Subsequent Performance Of Installation Qualification (iq) And Operational Qualification (oq) With Documentation And Report. 8. Local Training Of At Least 2 End-user (personnel) To Operate, Troubleshoot And Maintain Equipment 9. Warranty, Parts, And Preventive Maintenance For At Least Two (2) Years 10. Provision Of Free Accessories/consumables, If Applicable 11. Certification/guarantee On Availability Of Parts, Accessories, Supplies Including Software For The Next 10 Years Or More 12. Warranty Period Shall Commence From The Date Of Acceptance By The End-user After Installation, Testing And Commissioning 13. Annual Or Bi-annual Preventive Maintenance From The Distributor's Qualified Technician During The Warranty Period 14. Availability Of Trained Service Engineers With Guaranteed Uptime Within 48 Hours For Troubleshooting And Repair Of Unit Even After The Warranty Period (1) Orbital Shaker General Specifications Type Of Movement: Orbital Shaker Diameter [mm]: 10 Permissible Shaking Weight (incl. Attachment) [kg]: At Least 7.5 Speed Range [1/min]: From 40 To At Least 300 Speed Display: Lcd Display Timer: Yes Timer Display: Lcd Time Setting Range [min]: From 1 To At Least 180 Operating Mode: Timer And Continuous Operation Shaking Table Lock: Yes Options For Heating And Cooling Voltage [v]: 220 - 240 / 100 - 120 Dimensions (w X H X D) [mm]: W (300 To 365) X (90 To 160) X (300 To 425) Inclusions One (1) Universal Attachment/clamp For Beakers And 96-well Plates Ten (10) Flask Clips Each For 50 Ml, 100 Ml, 250 Ml, And 500 Ml Terms And Conditions: 1. The Equipment Must Be Delivered Within 60-90 Calendar Days After The Issuance Of Notice To Proceed. 2. All Parts Of The Equipment And Its Accessories Must Be Identified By Part Number Or Accessory Number 3. Provision Of Operator’s And Service Manual (in English) Upon Delivery. 4. Calibration Of The Equipment And Initial Operation By Service Engineer 5. Qualified Service Engineer Must Perform Installation Qualification (iq) And Operational Qualification (oq) With Documentation And Report 6. Operations And Service Manual Must Be Provided 7. Relocation And Re-installation Of Equipment Within The Up Manila Area Within The Warranty Period With Subsequent Performance Of Installation Qualification (iq) And Operational Qualification (oq) With Documentation And Report. 8. Local Training Of At Least 2 End-user (personnel) To Operate, Troubleshoot And Maintain Equipment 9. Warranty, Parts, And Preventive Maintenance For At Least Two (2) Years 10. Provision Of Free Accessories/consumables, If Applicable 11. Certification/guarantee On Availability Of Parts, Accessories, Supplies Including Software For The Next 10 Years Or More 12. Warranty Period Shall Commence From The Date Of Acceptance By The End-user After Installation, Testing And Commissioning 13. Bi-annual Preventive Maintenance From The Distributor's Qualified Technician During The Warranty Period 14. Availability Of Trained Service Engineers With Guaranteed Uptime Within 48 Hours For Troubleshooting And Repair Of Unit Even After The Warranty Period. (1) Top Loading Balance General Specifications Capacity: At Least 600 G Readability: 0.01 G Repeatability: 0.01 G Pan Size: 110 To 130 Mm (diameter) With Different Weighing Modes To Include G, Kg, Ct, N, Oz, Ozt, Dwt, Lb, Grn With Calibration Capabilities With An Lcd Display With Stainless Steel Weighing Pan With Connectivity Abilities To A Printer And Computer Terms And Conditions: 1. The Equipment Must Be Delivered Within 60-90 Calendar Days After The Issuance Of Notice To Proceed. 2. All Parts Of The Equipment And Its Accessories Must Be Identified By Part Number Or Accessory Number 3. Provision Of Operator’s And Service Manual (in English) Upon Delivery. 4. Calibration Of The Equipment And Initial Operation By Service Engineer 5. Qualified Service Engineer Must Perform Installation Qualification (iq) And Operational Qualification (oq) With Documentation And Report 6. Operations And Service Manual Must Be Provided 7. Relocation And Re-installation Of Equipment Within The Up Manila Area Within The Warranty Period With Subsequent Performance Of Installation Qualification (iq) And Operational Qualification (oq) With Documentation And Report. 8. Local Training Of At Least 2 End-user (personnel) To Operate, Troubleshoot And Maintain Equipment 9. Warranty, Parts, And Preventive Maintenance For At Least Two (2) Years 10. Provision Of Free Accessories/consumables, If Applicable 11. Certification/guarantee On Availability Of Parts, Accessories, Supplies Including Software For The Next 10 Years Or More 12. Warranty Period Shall Commence From The Date Of Acceptance By The End-user After Installation, Testing And Commissioning 13. Annual Or Bi-annual Preventive Maintenance From The Distributor's Qualified Technician During The Warranty Period 14. Availability Of Trained Service Engineers With Guaranteed Uptime Within 48 Hours For Troubleshooting And Repair Of Unit Even After The Warranty Period (2) Vacuum Pump General Specifications Maximum Vacuum: 13 Mbar Nozzle Size: 8mm Power: 95w Motor Speed: Maximum Of 1450 Rpm Flow Rate: 25 Lpm At 1000 Mbar, 5 Lpm At 280 Mbar Noise: 50 Dba Or Less Inclusion At Least Two (2) Nozzle-fit Hose Terms And Conditions: 1. The Equipment Must Be Delivered Within 60-90 Calendar Days After The Issuance Of Notice To Proceed. 2. All Parts Of The Equipment And Its Accessories Must Be Identified By Part Number Or Accessory Number 3. Provision Of Operator’s And Service Manual (in English) Upon Delivery. 4. Calibration Of The Equipment And Initial Operation By Service Engineer 5. Qualified Service Engineer Must Perform Installation Qualification (iq) And Operational Qualification (oq) With Documentation And Report 6. Operations And Service Manual Must Be Provided 7. Relocation And Re-installation Of Equipment Within The Up Manila Area Within The Warranty Period With Subsequent Performance Of Installation Qualification (iq) And Operational Qualification (oq) With Documentation And Report. 8. Local Training Of At Least 2 End-user (personnel) To Operate, Troubleshoot And Maintain Equipment 9. Warranty, Parts, And Preventive Maintenance For At Least Two (2) Years 10. Provision Of Free Accessories/consumables, If Applicable 11. Certification/guarantee On Availability Of Parts, Accessories, Supplies Including Software For The Next 10 Years Or More 12. Warranty Period Shall Commence From The Date Of Acceptance By The End-user After Installation, Testing And Commissioning 13. Annual Or Bi-annual Preventive Maintenance From The Distributor's Qualified Technician During The Warranty Period 14. Availability Of Trained Service Engineers With Guaranteed Uptime Within 48 Hours For Troubleshooting And Repair Of Unit Even After The Warranty Period