University Of The Philippines Tender

Description Supply Of Laboratory Equipment For The Project Entitled Project 2: Establishment Of Pharmaceutical Sciences Service For Clinical Research (107-198) (1) Freeze Dryer General Specifications ● Chamber Maximum Capacity: 8l ● Condenser Maximum Capacity: 10l ● Sublimation Rate: 2-4 L/ Day ● Set Temperature Range: -60°c To -90°c ● Pressure Range: 0.01 To 10 Torr ● Compressor: 1/2 Hp ● Defrost Type: Manual ● Dimensions: Width - 390-410 Mm, Depth - 520 - 540 Mm, Height - 405 - 425 Mm ● Maximum Weight: 65 Kg ● Power Supply: 230 V, 50/60 Hz ● Allows Automatic Or Manual Process Control ● Temperature, Vacuum, And Timer Can Be Controlled ● Automatic Rapid Integrated Hot Gas Defrost Function For Quick Next Cycle Turn-around ● Homogeneous Temperature Distribution Across All Shelves In Dry Chamber Made Of Stainless Steel ● Backlight Lcd Display Indicates Temperature And Vacuum ● Ce Certified And Unique Serial Number For Tracing ● Controller: Jog-dial-switch (turn + Push) And Touch Button Inclusions: ● Accessories ○ T-type Manifold, 12 Ports With Handle Valve And Silicone Stopper ○ Dry Chamber, Acrylic, 8 Ports With Vacuum Handle And Silicone Stopper ○ Shelves, 3 Stages, Stainless Steel For Dry Chamber ○ Vacuum Handle Valve ○ 40 Ml, 80 Ml, 200 Ml Flasks With Silicone Flask Tops ○ Glass Tube Adapters ● Vacuum Pump ○ 1/3 Hp ○ 1450 Rpm Motor Ration ○ 84 L/min Max Flow Rate ○ 670 Mmhg Max Vacuum Terms And Conditions: 1. Delivery Of Sixty (60) To Ninety (90) Days After Po Awarding 2. Basic Documented Verification Of The Equipment Functionality 3. All Parts Of The Equipment And Its Accessories Must Be Identified By Part Number Or Accessory Number 4. Installation, Calibration, And Initial Operation Of The Equipment Done By Qualified Service Engineer As Part Of The Bid Price 5. Operations And Service Manual Must Be Provided 6. Standard Operating Procedures (eg. Cleaning, Routine Maintenance, Etc.) If Available 7. Local Training Of At Least 2 End-user (personnel) At The College Of Pharmacy Or The Supplier’s Laboratory To Operate, Troubleshoot, And Maintain Equipment 8. Warranty, Parts, And Preventive Maintenance For Two (2) Years Or More 9. Certification/guarantee On Availability Of Parts, Accessories, Supplies For The Next 10 Years Or More 10. Warranty Period Shall Commence From The Date Of Acceptance By The End-user After Installation, Testing And Commissioning 11. Bi-annual Preventive Maintenance From The Distributor's Qualified Technician During The Warranty Period 12. Availability Of Trained Service Engineers To Respond, Troubleshoot, And Repair Unit Within 48 Hours Of A Reported Incident Even After The Warranty Period. 13. Bid Price Must Include Value-added Tax Of 12 Percent And Delivery Fee. (1) Homogenizer General Specifications: ● Capable Of Of Mixing, Dispersing, Emulsifying, And Milling ● Mixing Components Should Be Interchangeable Without Any Tools ● Mixing Capacity Range: 1-30 L ● Machine Dimensions: Length - 400 - 500 Mm, Width - 390 - 500 Mm, Height - 1160 - 1260 Mm ● Maximum Weight: 30 Kg ● Motor: 1 Hp Ac ● Power Supply: Single Phase, 220v, 50/60hz ● Speed Range: 0-6000 Rpm ● Motor Height Adjustment: Electrical ● Material: Medical Grade Ss316l Material For All Wetted Parts ● Rotor/stator “v” Design, Double Vortex 65 Mm ● Machine Base: Corrosion Resistant Aluminum Base With Height-adjustable Non-slip Rubber Feet ● Must Have Emergency Stop/ Turn Off Button Inclusions: 1. Explosion Proof Motor, Cable Or Remote Panel Control 2. Vessel Clamp 3. Aluminium H Stand With Electrical Lifting 4. Attachments A. High Flow Mixer 83 Mm B. Rotor Stator Sv 45mm C. Rotor Stator Sv 65mm D. Dispersing Blade 63 Mm E. Vessel Clamp 5. Water Bath Circulator A. Temp Range: 5 To 95 Celsius B. For Both Cooling & Heating C. Hose & Fittings Included D. Able To Monitor Jacket Temperature 6. 1l Ss Jacketed Vessel A. Material Wetted Part Ss316l B. Non-wetted Part Ss304 7. 5l Ss Jacketed Vessel A. Working Capacity 5 Liters B. Tank Flat Top C. Dish Bottom D. Material Wetted Part Ss316l E. Non-wetted Part Ss304 F. Thickness Body 3mm G. Jacket 3mm H. Discharge By Manual Tilting I. Design Temperature 150 Celsius J. Included Pt100 Temp Sensor For Product K. Temp Controller Module 8. 10l Ss Jacketed Vessel A. Working Capacity 10 Liters B. Tank Flat Top C. Dish Bottom D. Material Wetted Part Ss316l E. Non-wetted Part Ss304 F. Thickness Body 3mm G. Jacket 3mm H. Discharge By Manual Tilting I. Design Temperature 150 Celsius J. Included Pt100 Temp Sensor For Product K. Temp Controller Module 9. Piston Type Volumetric Filling Machine With Filling Nozzle A. Suitable For Semi-viscous And Viscous Semi-solids B. Contact Parts Ss316l C. Non-contact Parts Ss304 D. Dosage Capacity Range: 20 Ml To 250 Ml Terms And Conditions: 1. Delivery And Installation Of One-hundred Eighty (180) To Two-hundred Ten (210) Days After Awarding Of Purchase Order (po). 2. With Factory Acceptance Tests (fat) And Site Acceptance Tests (sat), Design Qualification (dq), Installation Qualification (iq), Operational Qualification (oq), And Performance Qualification (pq) Documentation And Tools As Part Of The Bid Price 3. All Parts Of The Equipment And Its Accessories Must Be Identified By Part Number Or Accessory Number 4. Qualified Service Engineers Must Perform Factory Acceptance Tests (fat) And Site Acceptance Tests (sat), Design Qualification (dq), Installation Qualification (iq), Operational Qualification (oq), And Performance Qualification (pq) With Documentation And Reports As Part Of The Bid Price 5. Operations And Service Manual Must Be Provided 6. Standard Operating Procedures (eg. Cleaning, Routine Maintenance, Etc.) If Available 7. Local Training Of At Least 5 End-users With Certificate At The Compounding And Product Development Gmp Compliant Facility At The College Of Pharmacy 8. Warranty, Parts, And Preventive Maintenance For Two (2) Years Or More 9. Certification/guarantee On Availability Of Parts, Accessories, Supplies For The Next 10 Years Or More 10. Warranty Period Shall Commence From The Date Of Acceptance By The End-user After Installation, Testing And Commissioning 11. Bi-annual Preventive Maintenance From The Distributor's Qualified Technician During The Warranty Period 12. Availability Of Trained Service Engineers To Respond, Troubleshoot, And Repair Unit Within 48 Hours Of A Reported Incident Even After The Warranty Period 13. Bid Price Must Include Value-added Tax Of 12 Percent And Delivery Fee (1) Mixer General Specifications Of Mixer: ● Can Mix The Material And The Binder Into A Wet, Soft Mass, Uniformly Cut Into Wet Granules, And Then Dry The Granules ● Must Include A Granulator And Fluid Bed Dryer Attached By A Line Or Sizer ● Must Be Certified By Supplier As Good Manufacturing Practice Model ● Granulator ○ Voltage: 220 V ○ Dimensions: Length - 700 - 1100 Mm, Width - 400 - 600 Mm, Height - 900 - 1300 Mm ○ Container Volume Range: 5-10l ○ Output Range: 2-8 Kg ○ Maximum Speed Range: 800 Rpm ○ Maximum Cutting Speed: 3000 Rpm ○ Power Requirement Range: 3-10 Kw ○ Contact Parts: Ss316l, Non-contact Parts: Ss304 ○ Compressed Air Requirement Range ■ Pressure Range - 0.4 - 0.6 Mpa ■ Air Flow Rate - 0.1 - 0.2 M3/min ○ Must Have Built In Electric Heating System ● Fluid Bed Dryer ○ Voltage: 220 V ○ Dimensions: Length - 900 - 1200 Mm, Width - 700 - 1500 Mm, Height - 1900 - 2200 Mm ○ Container Volume Range: 5-10l ○ Processing Capacity Range: 1.5 - 4.8kg ○ Total Power Requirement Range: 10-20 Kw ○ Contact Parts: Ss316l, Non-contact Parts: Ss304 ○ Compressed Air Requirement Range ■ Pressure Range - 0.4 - 0.8 Mpa ■ Air Flow Rate - 0.1 - 0.3 M3/min ○ Must Be Upgradable To Have Granulation And Spraying/coating Capabilities ○ Must Have Built In Electric Heating System ○ Must Have Explosion Duct Inclusions For Both Mixer And Fluid Bed Dryer: ● Must Have Complete Validation Document Protocols And Reports ● Must Include Equipment Manuals ● Must Have Safety Features Such As, But Not Limited To, Emergency Stop And Safety Interlock Features ● Must Include Programmable Logic Controllers (plcs) And Human Machine Interface (hmi) For Operational Controls ● Must Include Printer For Process Parameters Terms And Conditions: 1. Delivery And Installation Of One-hundred Eighty (180) To Two-hundred Ten (210) Days After Awarding Of Purchase Order (po). 2. Must Include Factory Acceptance Tests (fat) And Site Acceptance Tests (sat), Design Qualification (dq), Installation Qualification (iq), Operational Qualification (oq), And Performance Qualification (pq) Documentation And Tools As Part Of The Bid Price 3. All Parts Of The Equipment And Its Accessories Must Be Identified By Part Number Or Accessory Number 4. Qualified Service Engineers Must Perform Factory Acceptance Tests (fat) And Site Acceptance Tests (sat), Design Qualification (dq), Installation Qualification (iq), Operational Qualification (oq), And Performance Qualification (pq) With Documentation And Reports As Part Of The Bid Price 5. Operations And Service Manual Must Be Provided 6. Standard Operating Procedures (eg. Cleaning, Routine Maintenance, Etc.) If Available 7. Local Training Of At Least 5 End-user With Certificate At The Compounding And Product Development Gmp Compliant Facility At The College Of Pharmacy 8. Warranty, Parts, And Preventive Maintenance For Two (2) Years Or More 9. Certification/guarantee On Availability Of Parts, Accessories, Supplies For The Next 10 Years Or More 10. Warranty Period Shall Commence From The Date Of Acceptance By The End-user After Installation, Testing And Commissioning 11. Bi-annual Preventive Maintenance From The Distributor's Qualified Technician During The Warranty Period 12. Availability Of Trained Service Engineers To Respond, Troubleshoot, And Repair Unit Within 48 Hours Of A Reported Incident Even After The Warranty Period Bid Price Must Include Value-added Tax Of 12 Percent And Delivery Fee