United Nations Secretariat Tender

The United Nations Global Service Centre (ungsc) Requires The Provision And Installation, Maintenance, Repair, Commissioning And Testing Of Fiber Optic And Utp Network Cables For The Ungsc, Brindisi – Italy. Delivery Terms: Delivery At Place (dap) – Incoterm 2010, Ungsc, Brindisi – Italy. 1. Materials And Services Required The Required Materials/services Shall Include (but Shall Not Be Limited To) The Following: 1.1 Cat6 Utp Cabling - Estimated Requirement For One (1) Year: 20.000 Meters; 1.2 At6 Utp Cable Termination - Estimated Requirement For One (1) Year: 2000 Each (termination); 1.3 Fiber Optic Backbone Cabling - Estimated Requirement For One (1) Year: 4000 Meters Indoor And 4000 Meters Outdoor; 1.4 Fo Termination - Estimated Requirement For One (1) Year: 2000 Each (termination); 1.5 Cabinets/racks Installation - Estimated Requirement For One (1) Year: 5 Each; 1.6 Dismantling The Existing Cabling System (combined With The “cabinets/racks Installation” Service) - Estimated Requirement For One (1) Year: 500 Cables And 21 Patch Panels; 1.7 Installation Of Utp Cat6 Cables And Conduits On The Wall - Estimated Requirement For One (1) Year: 4000 Meters. 1.8 On The Wall Socket Installation - Estimated Requirement For One (1) Year: 400 Sockets (each). 1.9 The Installation Services Of The Fiber Trunk Cabling, Shall Include (but Shall Not Be Limited To) The Following Specifications: 1.9.1 Any Cabling Interconnecting The Intermediate Distribution Cabinet To The Main Distribution Cabinet Shall Be Laid In A Straight Run Without Intermediate Splices And All Cables Shall Be Terminated At Both Ends. 1.9.2 The Repairing Of Fiber Optic Wiring Due To Cable Breakage, Connectivity Problems, Any Other Problem On Existing Fiber Optic Network And Decreased Performance If Degradation Is More Than 20% From Initial Measuring Outside Of Warranty Period. 2. Applicable Certifications And Standards 2.1 The Manufacturer Of The Proposed Materials Shall Be Certified Iso 9001:2015, Tuv Or Any Equivalent. 2.2 The Provided Materials Must Be: 2.2.1 Ce (conformité Européenne) Marked In Accordance With European Directive N. 2006/95/ec; 2.2.2 In Compliance With International Standards Such As En Or Rohs Or Any Equivalent; And 2.2.3 Certified By An Authorized Certification Body Such As Csq Or Bs Or Enec Or Equivalent. 2.3 All The Works To Be Executed, Must Be In Compliance With Applicable Ansi, Tia, Iso/iec 9314, Bicsi (or Equivalent) Standards. 3. Service Schedule The Contractor Shall Comply With The Following Service Schedule: • Critical: Response Time Within 24 Hours From The Ungsc Notification. • Urgent: Response Time Within 72 Hours From The Ungsc Notification. • Schedule Installation: To Be Determined On A Case By Case. 4. Warranty The Contractor Must Ensure That The Items Provided Include The Standard Manufacturer’s Warranty Conditions With A Minimum Two-years Duration From The Date Of Acceptance Of The Goods By The Ungsc. The Contractor Shall Provide Warranty For Workmanship Against Defects For At Least Two-years (2) Liability From The Date Of The Handover Certificate. 5. Bidders Previuos Experience 5.1 The Bidder Will Be Requested To Provide Three (3) Letters/references Concerning Similar Contracts For The Provision Of Ict Cabling, Successfully Completed Over The Past Five (5) Years. .