U S COAST GUARD USA Tender

The United States Coast Guard Surface Forces Logistics Center Has A Requirement And Requesting Quotations For The Following Part: item 1) 2 040 01-f11-2447 rhib Notch Ultra-poly Pad Pc D mfg Name: J H Menge & Company Inc. part_nbr: 6139248 qty 8 notch Pad, Piece "d" Description: 12 Inches Wide X 96 Inches Long X 1.25 Inches Thick, With Staggered Rubber Backing From 2.35 Inches To 2.75 Inches, Drilled Per Drawing. Color Is Gray. For Small Boat Retrieval Notch.. Each Item Shall Be Individually Packaged In Accordance With Mil-std-2073-1e Method 10, Cushioned As Appropriate To Prevent Movement Or Damage From External Impact. Each Item Shall Then Be Packed In An Appropriately Sized Astm-d5118 Double-wall Fiberboard Box. Each Package Shall Be Marked Iaw Mil-std-129r Except Bar Coded Iaw Iso/iec-16388- 2007, Code 39 Symbology. Failure To Meet Requirements For Packaging, Packing, Marking And Bar-coding Will Result In The Item(s) Being Rejected At The Warehouse And Returned To The Vendor item 2) 2040 01-f11-2448 rhib Notch Ultra-poly Pad Pc G mfg Name: J H Menge & Company Inc. part_nbr: 6139231 qty 6 ultra-poly Pad, Part "g". Rhib Forward Skid Pad, Center description: 12 Inches Wide X 48 Inches Long, Yellow Repro Uv Stable. drilled And Fabricated Per Drawings, 1.25 Inch Thick With Whmw-pe Backing Material. each Item Shall Be Individually Packaged In Accordance With Mil-std-2073-1e Method 10, Cushioned As Appropriate To Prevent Movement Or Damage From External Impact. each Item Shall Then Be Packed In An Appropriately Sized Astm-d5118 Double-wall fiberboard Box. each Package Shall Be Marked Iaw Mil-std-129r Except Bar Coded Iaw Iso/iec-16388- 2007, Code 39 Symbology. failure To Meet Requirements For Packaging, Packing, Marking And Bar-coding Will result In The Item(s) Being Rejected At The Warehouse And Returned To The Vendor. item 3) 2040 01-f11-2446 rhib Notch Ultra-poly Pad Pc G mfg Name: J H Menge & Company Inc. part_nbr: 6139264 qty 3 u Ltra-poly Notch Pad, Part "c". Item Is Used In The Launch And Recovery Stern Ramp Notch. This Pad Is Mounted On The Port Outboard Aft Section Of The Stern Ramp. Dimensions: 25 Inches Wide X 49 Inches Long X 1.25 Inches Thick, With Graduated Rubber Backing, Drilled And Fabricated In Gray Or Black Repro Grade, Uhmw-pe. Each Item Shall Be Individually Preserved And Packaged As Appropriate In Accordance With Mil-std-2073-1e Method 10, Packed In An Appropriately Sized Astm-d6251 Type Iii, Class 1 Wood-cleated Panel-board Shipping Box, Astm-d6880 Class 2 Heavy Duty Screwed Wooden Box Or Astm-d5118 Double-wall Fiberboard Box As Appropriate Cushioned Or Secured To Prevent Damage From Movement Or External Impacts. Each Package Shall Be Marked Iaw Mil-std-129r Except Bar Coded Iaw Iso/iec-16388- 2007, Code 39 Symbology. Failure To Meet Requirements For Packaging, Packing, Marking And Bar-coding Will Result In The Item(s) Being Rejected At The Warehouse And Returned To The Vendor. item 4) 2040 01-f14-3714 rhib Notch Ultra-poly Pad Pc G mfg Name: J H Menge & Company Inc. part_nbr: Pu110112jhm qty 7 ultrapoly, Color Yellow With Rubber Backing. Item Is The New (f) Center Pad Which replaces The Old (f) And (e) Pads. This Pad Is Wider Than The Old (f) Pad But Has the Same Bolting Pattern. each Item Shall Be Individually Packaged In Accordance With Mil-std-2073-1e Method 10, Cushioned As Appropriate To Prevent Movement Or Damage From External Impact. each Item Shall Then Be Packed In An Appropriately Sized Astm-d5118 Double-wall fiberboard Box. each Package Shall Be Marked Iaw Mil-std-129r Except Bar Coded Iaw Iso/iec-16388- 2007, Code 39 Symbology. all Items Are Inspected When Delivered To The Coast Guard Warehouse. Failure To meet The Requirements For Packaging, Packing, Marking (pp&m) And Bar-coding Will result In The Item(s) Being Rejected And Possibly Returned To The Vendor. This Will delay Payment. Any Questions Concerning The Pp&m Requirements Or Bar-coding Should be Addressed With The Contracting Officer Prior To Contract Award. item 5) 2040 01-f11-2449 rhib Notch Ultra-poly Pad Pc B mfg Name: J H Menge & Company Inc. part_nbr: 6139272 qty 4 ultra-poly Notch Pad, Part "b" Dimensions: 12 Inches Wide X 49 Inches Long X 1.25 Inches Thick With 1 Inch Rubber Backing, Drilled Drilled And Fabricated In Tellow, Repro Grade, Uhmw-pe. Mounted In The Small Boat Launch And Recovery Stern Ramp Notch. Each Item Shall Be Individually Packaged In Accordance With Mil-std-2073-1e Method 10, Cushioned As Appropriate To Prevent Movement Or Damage From External Impact. Each Item Shall Then Be Packed In An Appropriately Sized Astm-d5118 Double-wall Fiberboard Box. Each Package Shall Be Marked Iaw Mil-std-129r Except Bar Coded Iaw Iso/iec-16388- 2007, Code 39 Symbology. Failure To Meet Requirements For Packaging, Packing, Marking And Bar-coding Will Result In The Item(s) Being Rejected At The Warehouse And Returned To The Vendor. item 6) 2040 01-f11-2445 rhib Notch Ultra-po mfg Name: J H Menge & Company Inc. part_nbr: 6139256 qty 3 ultra-poly Pad, Part "a". Used In The Small Boat Retrieval Notch, Allows The Small Boat To Glide Up Or Slide Out Of The Notch Without Damage To The Hull. Dimensions: 25 Inches Wide X 49 Inches Long By 1.25 Inches Thick With Staggered Rubber Backing, Drilled And Fabricated In Gray Or Black, Repro Grade Uhmw-pe. Each Item Shall Be Individually Packaged As Appropriate In Accordance With Mil-std2073-1e Method 10, Packed In An Appropriately Sized Astm-d6251 Type Iii, Class 1 Wood-cleated Panel-board Shipping Box, Astm-d6880 Class 2 Heavy Duty Screwed Wooden Box Or Astm-d5118 Double-wall Fiberboard Box As Appropriate Cushioned Or Secured To Prevent Damage From Movement Or External Impacts. substitute Parts Are Not Acceptable. It Is Anticipated That A Non-competitive Sole Source Purchase Order Shall Be Awarded As A Result Of This Synopsis/solicitation. It Is The Government’s Belief That Only Jh. Menge & Co Inc.and/or Their Authorized Distributors Can Provide This Unit. Concerns Having The Expertise And Required Capabilities To Provide This Item Are Invited To Submit Complete Information Discussing The Same Within Two (2) Calendar Days From The Day This Notice Posted. The Data Must Include Sufficient Detail To Allow The Coast Guard To Evaluate The Proposal Relative To The Requirements. The Information Submitted Must Include A Letter From The Oem Verifying The Offeror Is An Authorized Distributor, And Verifying The Oem Will Supply Genuine Oem Parts. delivery Shall Be F.o.b. Destination To Uscg Surface Forces Logistics Center, 2401 Hawkins Point Road, Baltimore Md 21226 this Is A Combined Synopsis/solicitation For A Commercial Item Prepared In Accordance With The Format Outlined In Far Subpart 12.6, Fac 2024-05 May 22, 2024 And As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation. Quotations Are Being Requested And A Written Solicitation Will Not Be Issued. The Naics Code For This Solicitation Is 333998 And The Business Size Standard Is 500. The Resultant Purchase Order Will Be Awarded Using Simplified Acquisition Procedures In Accordance With Far 13 the U.s. Coast Guard Intends To Award On An All Or None Basis To A Responsible Offeror Whose Offer Conforming To The Solicitation Will Be The Most Advantageous To The Government. Award Will Be Lowest Price Technically Acceptable. The Coast Guard Intends To Award On A Firm Fixed Price Contract. all Responsible Sources May Submit A Quotation Via Email To Eric.i.goldstein@uscg.mil, Which If Timely Received, Shall Be Considered By The Agency. Companies Must Have Valid Duns Numbers And Be Registered With Systems For Award Management (sam) And Shall Provide The Company Tax Information Number (tin) With Their Offer. The Closing Date And Time For Receipt Of Quote Is August 29, 2024 At _9:00 Am Eastern Standard Time offerors Must Submit The Following Information On Their Quote: disclosure: The Offeror Under This Solicitation Represents That [check One]: __ It Is Not A Foreign Incorporated Entity That Should Be Treated As An Inverted Domestic Corporation Pursuant To The Criteria Of (hsar) 48 Cfr 3009.104-70 Through 3009.104-73; __ It Is A Foreign Incorporated Entity That Should Be Treated As An Inverted Domestic Corporation Pursuant To The Criteria Of (hsar) 48 Cfr 3009.104-70 Through 3009.104-73, But It Has Submitted A Request For Waiver Pursuant To 3009.104-74, Which Has Not Been Denied; Or __it Is A Foreign Incorporated Entity That Should Be Treated As An Inverted Domestic Corporation Pursuant To The Criteria Of (hsar) 48 Cfr 3009.104-70 Through 3009.104-73, But It Plans To Submit A Request For Waiver Pursuant To 3009.104-74. (g) A Copy Of The Approved Waiver, If A Waiver Has Already Been Granted, Or The Waiver Request, If A Waiver Has Been Applied For, Shall Be Attached To The Bid Or Proposal. (end Of Provision) the Following Far Clauses Provisions Apply To This Solicitation. Far 52.212-1, Instructions To Offerors-commercial Items (june 2020); Far 52.212-3, Offeror Representations And Certifications-commercial Items (november 2020) With Alternate I. Offeror(s) Must Include A Completed Copy Of Far 52.212-3 With Their Quote. the Following Far Clauses Apply To This Solicitation. Offerors May Obtain Full Text Versions Of These Clauses Electronically At Www.arnet.gov.; Far 52.212-4, Contract Terms And Conditions-commercial Items (oct 2018); Far 52.212-5, Contract Terms & Conditions Required To Implement Statutes Or Executive Orders-commercial Items (november 2020). The Following Clauses Listed Within Far 52.212-5 Are Applicable: 52.204-10, Reporting Executive Compensation And First-tier Subcontract Awards (june 2020) 52.219-28, Post Award Small Business Program Rerepresentation (may 2020) far 52.222-3, Convict Labor (jun 2003)(e.o. 11755); far 52.222-19 Child Labor-cooperation With Authorities And Remedies (jan 2020) (e.o. 13126); far 52.222-21, Prohibition Of Segregated Facilities (april 2015); far 52.222-26, Equal Opportunity (april 2015)(e.o. 11246); 52.222-50, Combating Trafficking In Persons (october 2020) far 52.223-18 Contractor Policy To Ban Text Messaging While Driving (june 2020); 52.225-13, Restrictions On Certain Foreign Purchases (jun 2008) 52.222-36, Equal Opportunity For Workers With Disabilities (jun 2020) 52.225-3, Buy American--free Trade Agreements--israeli Trade Act (may 2014) 52.232-33, Payment By Electronic Funds Transfer-central Contractor Registration (oct 2018)(31 U.s.c. 3332).. The Following Items Are Incorporated As Addenda To This Solicitation: Copies Of Hsar Clauses May Be Obtained Electronically At Www.dhs.gov. cgap 3042.302-90 Valuation Requirements For The Acquisition Of Spare Parts Purchased For Inventory Control Points From Hq Contracts (oct 2008). Copies Of Cgap Clauses May Be Obtained Electronically At: Www.uscg.mil/acquisition/procurement/pdf/cim_4200_19h.pdf