Survey Tenders

Details: Description Part A Facilities For The Engineer A.1.1 (10) Provision Of Living Quarter For The Engineer (rental Basis) Mo. 10.37 Total Cost (part A) Carried To Summary Php Part B Other General Requirements B.4(1) Construction Survey And Staking Km. 0.29 B.5(1) Project Billboard/signboard Each 3.00 B.7(1) Occupational Safety And Health L.s. 1.00 B.9(1) Mobilization/demobilization L.s. 1.00 B.18(2) Craneway L.s. 1.00 Total Cost (part B) Carried To Summary Php Part C Earthworks 801(1) Removal Of Structures And Obstruction L.s. 1.00 Total Cost (part C) Carried To Summary Php Part D Reinforced Concrete 900(1)c Structural Concrete (3000psi, Class-a, 28days) Cu.m. 150.95 901(1) Lean Concrete Cu.m. 156.30 902(1)a1 Reinforcing Steel (deformed)(grade 40) Kg. 9,724.24 Total Cost (part D) Carried To Summary Php Part L Flood And River Control And Drainage Part L-a Earthworks 1702(1)a Structure Excavation (common Soil) Cu.m. 294.90 1704(1)b Embankment (from Borrow) Cu.m. 5,898.00 Total Cost (part L-a) Carried To Summary Php Part L-b Bank And Slope Protection Works 1711(1) Stone Masonry Cu.m. 630.80 1712(1) Concrete Slope Protection Cu.m. 636.98 1716(6) Structural Steel Sheet Piles, Furnished M. 4,830.00 1716(12) Structural Steel Sheet Piles, Driven M. 4,724.50 Total Cost (part L-b) Carried To Summary Php

Details: This Notice Is Being Published In Accordance With Federal Acquisition Regulation (far) Requiring The Dissemination Of Information On Proposed Contract Actions. This Is A Notice Of Intent To Award Modifications Against The Existing Task Orders Under The Army Reserve A/e Indefinite Delivery/indefinite Quantity (idiq) Multiple Award Task Order Contracts (matoc). The Statutory Authority For This Sole-source Procurement Is Far 6.302-1, "only One Responsible Source And No Other Supplies Or Services Will Satisfy Agency Requirements." project Description: This Is An Indefinite Delivery/indefinite Quantity (idiq) Contract For Architect/engineer Services For Army Reserve Projects Nationwide (including Puerto Rico, Guam, And American Samoa). Projects May Consist Of A/e Services For Horizontal And Vertical Army Reserve Projects. A/e Services May Consist Of Complete Designs; Concept Level Designs; Development Of Design/build Or Design/bid/build Requests For Proposal; Bim Data Development; Site Investigation Of Existing Conditions; Engineering Services During Construction; Design Of Demolition/deconstruction; Hazardous Materials Survey, Analysis, And Abatement Methodology; Sustainable Design; Value Engineering, Construction Cost Estimates And Schedules; And Technical Studies/analysis In Support Of Design For New Construction And Renovation Projects At Various Locations; And Comprehensive Planning That Is Related To Future Construction Requirements On Military Installations Or On Privately Held Property To Be Leased Or Purchased By The Government For The Purposes Of Construction Of Facilities To Support The Mission Of The Army Reserve. Comprehensive Interior Design Services Including Furniture, Fixtures, & Equipment Planning May Also Be Required. This Contract Is Intended To Carry Out The Design Requirements Of The Army Reserve (arimd) Construction Program According To The Army Reserve Design Guide (http://www.wbdg.org/ffc/dod/unified-facilities-criteria-ufc/ufc-4-171-05-2005-c3). project Task Orders Under This Idiq May Include Design Of New Construction, Partial Renovation Or Full Renovation Of Some Or All Of The Following Types Of Building Structures: Training Centers (which Include Administration, Education, Assembly, Storage, Special Training And Other Support Spaces); Vehicle Maintenance Shops (which Include Work Bays, Administration, Special Training, Storage And Support Spaces); Stand-alone Buildings (which Include Administration Facilities, Unheated Storage, And Direct Support/general Support Warehouses); And Other Facilities Unique To The Army Reserve And Military Installations. Associated Services May Consist Of The Following Activities: Preparation Of Construction Solicitations For Design-bid-build (complete Design) Projects And Design Build Rfp’s (request For Proposal); Concept Level Designs And Engineering Feasibility Studies; Military Master Planning; Site Investigation/assessment Of Existing Conditions; Value Engineering Services; Engineering Services During Construction (shop Drawing Review, Site Inspection, Etc); Design Of Demolition Or Deconstruction; Hazardous Materials Survey, Analysis, And Abatement Methodology; Leed Certification, Sustainable Design; Construction Cost Estimates And Schedules; Technical Studies/analysis In Support Of Design For New Construction And Renovation; Comprehensive Planning That Is Related To Future Construction Requirements On Military Installations; Coordination And Attainment Of Local, State And Federal Permits; Support And Coordination In The Development Of Utility Agreements; And Utility Investigations. this Notice Of Intent Is Not Considered A Request For Quotations Or Competitive Proposals. This Is A Written Notice To Inform The Public Of The Government’s Intent To Proceed With Awarding Modifications Against The Existing Task Orders Under The Army Reserve A/e Idiq Matoc. Interested Concerns Must Show Clear And Convincing Evidence That Competition Of This Requirement Would Be Advantageous To The Government. A Determination By The Government Not To Compete This Proposed Action Based On Responses To This Notice Is Solely Within The Discretion Of The Government. The Approved Justification And Approval (j&a) For This Procurement Will Be Posted Following The Closure Of This Notice. responses Should Be Emailed To The Government Point Of Contact For This Acquisition At Alex.j.hamilton@usace.army.mil No Later Than 06 January At 2:00 Pm Eastern Time (et). responses Should Include: 1) Company Name, Address, Unique Identifier Number, And Point Of Contact Name Of Email Address. 2) Identify Business Size (i.e. Small Business, Other Than Small Business, Etc.) In Accordance With The Size Standard For Naics Code 541330. 3) Detailed Information That Will Demonstrate That Your Business Has The Capability To Provide Above Services.

Purchaser Name: US GEOLOGICAL SURVEY USA | Details: Request For Information (rfi): Usgs Equipment Maintenance And Repair Services For Ott Hydromet Equipmentthe Us Geological Survey (usgs) Needs To Assess Industry Interest And Capabilities For Assisting The Usgs, Hydrologic Instrumentation Facility (hif) In Tuscaloosa, Al In Obtaining Equipment Maintenance And Repair Services For Ott Hydromet Equipment.in Accordance With Federal Acquisition Regulation (far) 52.215-3, Request For Information For Solicitation And Planning Purposes (october 1997) And 10.002(b)2)(i), This Notice Is Issued Solely For Information, Planning And Market Research Purposes. This Request For Information (rfi) Does Not Constitute A Solicitation Or An Indication The Government Will Contract For The Products Or Services Contained In This Notice. This Notice Is Not To Be Construed As An Acquisition Request For Proposal (rfp) Or Request For Quotation (rfq). The Government Does Not Intend To Award A Contract On The Basis Of This Solicitation Or To Otherwise Pay For The Information Solicited Except As An Allowable Cost Under Other Contracts As Provided In Subsection 31.205-18, Bid And Proposal Costs, Of The Federal Acquisition Regulation. Although "proposal" And "offeror" Are Used In This Request For Information, Your Response Will Be Treated As Information Only. It Shall Not Be Used As A Proposal Or Quote. Please Ensure That Any Sensitive Or Protected Information Is Marked As Such And The Government Will Ensure This Information Is Not Released Externally.rfi Requirements:this Solicitation Is Issued For The Purpose Of Obtaining Capability Statements From Interested Parties That Can Provide Equipment Maintenance And Repair Services For Ott Hydromet Brand Equipment. The Equipment Includes: - Submersible And Non-submersible Pressure Sensors- Bubbler Systems- Radar Sensors- Rain Gages- Temperature Sensors- Encoders- Data Loggers- Goes Data Collection Platforms- Sdi-12 Radios Devices- Cables And Interfaces it Is Anticipated That Maintenance And Repair Services Would, At A Minimum, Include The Following Tasks:- Visual Inspection And Basic Functional Checks- Diagnostic Testing And Evaluation- Troubleshooting For Proper Operation- Electronic Component And/or Circuit Board Replacement- Removal, Replacement, And Functional Testing Of Component Parts- Mechanical Component Repair Or Replacement- Sensor Evaluation And Testing- Sensor Replacement- Sensor Factory Calibration- Performing Tests, Or Checks, As Required To Verify Proper Operation- Inspection, Evaluation, Testing, And Repair Of Cables- Functional Testing Of Related Equipment Software- Performing Software Upgrades- Cleaning Of Equipment, As Neededit Is Expected That Delivered Repair Products (following Maintenance/repair Services) Perform And Operate In Accordance With Equipment Manufacturer Specifications, And Where Applicable, Usgs Specifications For Measurement Accuracy. Repair Products Shall Also Be Covered Under A Repair Warranty.the Usgs Is Searching For Small Business Concerns, I.e., 8(a) Businesses, Hubzone Businesses, Small-disadvantaged Businesses, Woman-owned Small Businesses, Veteran-owned Small Businesses Or Service-disable Veteran Owned Small Businesses Capable Of Providing The Described Products Or Services. Large Businesses Are Also Encouraged To Respond To This Rfi. The Usgs Is Also Requesting Confirmation Whether The Requested Products/services Can Be Obtained Through Any Existing Gsa Schedule Contracts Or Through Open Market Means. The Resultant Contract, If There Is Such, Is Anticipated To Be Firm Fixed Price. The Procurement Is Anticipated To Occur In Fy25. Action: Interested Vendors Who Believe They Have The Capability To Provide The Required Product/services As Defined Are Invited To Submit A Capability Statement, Not To Exceed 15 Pages Including Attachments, Exhibits, Etc. Response Should Include The Following Information: 1. Company Name, Sam Uei, Address, Point Of Contact, Email Address, And Business Type (i.e. 8(a), Hubzone, Veteran-owned Small Business, Etc.). 2. Gsa Schedule Contract Information If Applicable3. Capabilities Statement4. Past Performance Information Should Be Submitted For Similar Projects Conducted Within The Last Three (3) Years. If Possible, Three (3) Past Performance Examples Are Desired. Interested Vendors Must Provide Their Response Via Email To The Contracting Specialist Jean Walsh At Jwalsh@usgs.gov With The Subject Line Reading "rfi - Usgs Ott Equipment Maintenance And Repair Services". Responses Are Due Via Email To Jwalsh@usgs.gov By 8:00 Am Et, Tuesday, January 7, 2025. The Response Must Be Specific To The Rfi Requirements/qualifications Listed Above.no Feedback Or Evaluations Will Be Provided Regarding The Information Provided.

Details: The U. S. Army Contracting Command-new Jersey (acc-nj) On Behalf Of The Project Manager For Combat Ammunition Systems (pm-cas), Both Located At Picatinny Arsenal, New Jersey, Is Conducting Market Research To Identify Potential Qualified Sources Capable Of Manufacturing And Delivering M31 Type Triple Base Propellant. The M31 Type Triple Base Propellant Is A Component Of The 155mm M232-series Modular Artillery Charge System (macs) Load, Assemble, And Pack (lap) Production. The Purpose Of This Market Survey (w15qkn-25-x-128a) Is To Obtain Current Information On The Capability Of Potential Sources To Deliver M31 Type Triple Base Propellant To Support Fy26 – Fy31 Requirements. the 155mm M231 & M232-series Propelling Charges, Known As Macs, Consist Of Two Different Propelling Charges That Provide A Complete Zoning Solution For 155mm Artillery Applications By Using Multiples Of A Basic Increment. The M231 Charges Are Used At Lower Zones (zones 1 & 2), While M232-series Charges Are Used At Progressively Higher Zones As Required. The M31 Type Triple Base Propellant Is The 7-perforated Cylindrical Granular Triple-base Propellant For The M232-series Macs. to Be Considered A Capable Source For This Effort, All Interested Sources Must Submit The Requested Information: provide Evidence Of Capabilities Including An Ability To Produce The M31 Type Triple Base Propellant At A Rate Of Approximately 350,000 Pounds Per Month And Any Capability To Meet Maximum Surge Requirements Of Up To 2,226,000 Pounds Per Month; past Manufacturing Experience Of The M31 Type Triple Base Propellant Within The Last 10 Years; description Of Facilities, Personnel (numbers, Experience, Specialized Skill Sets), Key Raw Material Sources, And Environmental Compliance As It Relates To The Above Production Efforts; provide Evidence Of In-house Quality Assurance System(s) In Order To Support This Production Program; the Ability To Acquire Facilities With Sufficient Safety Clearance To Handle, Store And Transport Energetic Materials, Components And Propellant; a General Understanding Of United States Government (usg) Propellant Testing Requirements Including Projectiles Ammunition Compatibility, And The Approval Process For Ballistic Fire Tables; provide Company Name, Address, Telephone Number, Email Address, Technical Point Of Contact, Unique Entity Identifier (uei), And Company Size (please Specify As Either A Large Business, Foreign-owned Business, Small Business, Small Disadvantaged Business, 8(a) Concern, Woman-owned Small Business, Historically Underutilized Business Zone Concern, Veteran-owned Small Business, Or Service-disabled Small Business). all Companies Interested In This Notice Must Be Registered In System For Award Management (sam). this Market Survey Is For Informational And Planning Purposes And Shall Not Be Construed As A Request For Proposal (rfp). The Technical Data Package (tdp) Will Be Provided Upon Request For Information Only. The M232 Type Tdp Is Marked Distribution D, Therefore Distribution Will Only Be Authorized To The Department Of Defense (dod) And United States Dod Contractors. To Receive The Tdp, Contractors Are Required To Submit A Signed And Completed Dd Form 2345 - Militarily Critical Technical Data Agreement; Amsta-ar Form 1350 - Technical Data Request Questionnaire (attached); And Non-disclosure Agreement (nda) (attached). All Information Is To Be Submitted At No Cost Or Obligation To The Government. If A Formal Solicitation Is Generated At A Later Date, A Solicitation Notice Will Be Published. Please Identify And Appropriately Mark Any Proprietary Information Submitted. All Information Provided Will Not Be Returned And Will Be Held In Confidential Status. all Market Information Sought In This Notification Must Be Provided Within 15 Days Of This Notice By Electronic Mail Only At No Cost To The Government. The Point Of Contact For This Requirement Is Contracting Officer John C. Scott Jr Via Email At John.c.scott158.civ@army.mil And Contracting Specialist Cameron H. Sacco Via Email At Cameron.h.sacco.civ@army.mil . All Inquiries Shall Be Made Via E-mail Only. Telephone Inquiries Will Not Be Accepted. *amendment 01 Is Being Issued To Add The Certificate Of Destruction Attachment. **amendment 02 Is Being Issued To Extend The Response Date To December 20, 2024. ***amendment 03 Is Being Issued To Extend The Response Date To January 6, 2025.

Details: The Anatomic Pathology Department At Travis Afb Requires A Leica Bond Iii Staining Machine, Including Initial Supplies And Accessories, To Perform Immunohistochemistry Staining On Patient Tissue Samples, Enabling The Diagnosis And Treatment Of Various Diseases, Including Cancer. The Leica Bond Iii Is A High-throughput, Floor-standing Ihc Staining Unit Capable Of Staining Up To 30 Different Antibodies Simultaneously, Processing Up To 30 Slides In 2.5 Hours, And Handling Approximately 360 Slides Per Day. The System Features A User-friendly Interface With Large Icons And Intuitive Prompts, Allowing Technicians To Easily Add, Remove, Or Refill Reagents At Any Time Without Interrupting The Staining Cycle. This Is A 'brand Name Or Equal' Request, Seeking A Leica Bond Iii Or Equivalent Staining Machine That Meets The Specified Requirements. this Announcement Constitutes A Sources Sought (market Survey) Only.this Rfi Is For Market Research And Shall Not Be Considered As A Request For Quote (rfq) Or A Request For Proposal (rfp), Or Promise To Use As A Future Rfq Or Rfp. the Purpose Of This Rfi Is To Determine The Availability Of Businesses, Including Small Businesses (including Small Disadvantaged Businesses, Hubzone Firms, Certified 8(a), Service-disabled Veteran-owned Small Businesses, And Women-owned Small Businesses), To Provide The Required Products And/or Services. the Government Is Not Committed To Contract For Any Supply Or Service As A Result Of This Rfi. Further, The Air Force Is Not Currently Seeking Proposals And Will Not Accept Unsolicited Proposals. Responders Are Advised That The Government Will Not Pay For Any Information Or Administrative Costs Incurred In Response To This Rfi. All Costs Associated With Responding To This Rfi Will Be Solely At The Interested Party's Expense. Not Responding To This Rfi Does Not Preclude Participation In A Future Rfq, If Issued. on 1 Page, Responders Are Requested To Provide The Following Information: 1. Business Name And Address 2. Name Of Company Representative And Their Business Title 3. Business Size And Type Of Small Business (if Applicable) 4. Cage Code 5. Uei Number 6. A Brief Capabilities Statement That Addresses How Your Company Can Fulfill The Requirement Specified In The Statement Of Need (son). If You Have Any Comments Or Recommendations Regarding The Son, Please Include Them In Your Response.

Details: Work Of Water Supply System Of Bakho Town Under Amrut 2.0 survey (both Existing And Proposed Components), Soil Investigation, Design and Construction Of a) construction Of Intake Well And Raw Water Pumphouse On Son river Intake Well Is Considered With Diameter 6 Meters And height 22 Meters Having Average Wall Thickness 350 Mm Also pumphouse Of 4.00 M Height Is Considered b) Construction Of Collecting Well Having A Diameter Of 4.5 M And 6 meter. c) Raw Water Pump: Supplying And Installation Of 3 Nos. Vertical turbine Pumps 3 No 35 Kw (discharge M 23 Lps. Head 94.0 meter) (2w+1s) d) Water Treatment Plant Of 3.50 Mld Capacity Along With Clear water Pumps For 3.50 Mld And All Necessary Electrical And mechanical Equipment For Clear Water Pump House e) Clear Water Pump: 3 Nos.22 Kw (two Working And One Stand By) discharge 22 Ips And 57 M Head,22 Kw f) Providing And Laying Of Raw Water Pumping Main 300 Mm Dia di-k-9 Having Cumulative Length Of 7126 Meter. g) Providing And Laying Of Clear Water Pumping Main 100mm To 300 Mm Dia Di-k-9 Having Cummulative Length Of 4048 Meter. h) Construction Of Three Nos. 20.00 M Staging Height Rcc Overhead service Reservoir Having Capacity Of 475 Kl, 400 Kl, 425 Kl For effective Distribution Of Water. i) Providing, Laying And Jointing Of 110mm To 355 Hdpe Pn-6 Class pipe & 400 Mm Dia Di K7 Pipe For Strengthening And Extension Of water Supply Distribution Network Of Bakho Water Supply arrangement Having Total Length Of 51518 Meter. j ) Supply And Installation Of Plc Scada For Entire Water Supply system k) Providing / Shifting House Service Connections For 1226 Nos. Of domestic Water Connection. 1) 11 Kv Ht Feeder Of 10 Km Length For Intake Well & Wtp substation For Wtp And Intake Well.

Details: Presolicitation Notice/advertisement Gsa Public Buildings Service u.s. Government general Services Administration (gsa) Seeks To Lease The Following Space: state: Ar city: Little Rock delineated Area: West: I-430, Colonel Glenn Rd, Cooper Orbit rd, Rushmore Ave, Kanis Rd, Chenal Pkwy north: Cantrell Rd (thomas B Schueck Hwy), la Harpe Blvd east: Us-70, W Roosevelt Rd, Hwy 367 (s arch St & Arch St) south: Baseline Rd (hwy 338) minimum Sq. Ft. (aboa): 1,500 maximum Sq. Ft. (aboa): 1,650 space Type: Warehouse secured Parking Spaces (total): 6 full Term: 10 Years firm Term: 8 Years option Term: N/a additional Requirements: Warehouse Dimensions: *225” Length (18’9”) | 81” *width (6’9”) | 80” *ceiling Height (10’) *ground Clearance: 7.5” *floor Load 22,0000 roll Up Door secured Parking 24 Hour Access To Garage Or Warehouse build Blackout Privacy Fence 11/2022 offered Space Must Meet Government Requirements For Fire Safety, Accessibility, seismic, And Sustainability Standards Per The Terms Of The Lease. A Fully Serviced lease Is Required. Offered Space Shall Not Be In The 1-percent-annual Chance floodplain (formerly Referred To As “100-year” Floodplain). entities Are Advised To Familiarize Themselves With The Telecommunications prohibitions Outlined Under Section 889 Of The Fy19 National Defense authorization Act (ndaa), As Implemented By The Federal Acquisition regulation (far). ). For More Information, Visit: Https://acquisition.gov/far- case-2019-009/889_part_b. expressions Of Interest Due: 1/07/2025 market Survey (estimated): 1/21/2025 occupancy (estimated): 05/01/2025 send Expressions Of Interest To: name/title: Carson Melom-lemos / Lco email Address: Carson.melom-lemos@gsa.gov government Contact Information lease Contracting Officer Carson Melom-lemos project Manager Roxanne Cancino

Description: Sources Sought Notice Template ****************************************************************************** this Is A Sources Sought Notice For Information Only: This Is Not A Request For Quotes/proposals Or An Invitation For Bids. there Is No Solicitation At This Time. This Request For Capability Information Does Not Constitute A Request For Proposals. Submission Of Any Information In Response To This Market Survey Is Purely Voluntary And Will Be Used Only For Market Research Purposes To Determine Availability Of Sources, Commerciality, And Competitive Strategy. The Government Assumes No Financial Responsibility For Any Costs Associated With Any Response To This Notice As Incurred By Prospective Contractors. ****************************************************************************** project Title: Integrated Wall System Connex tracking Number: Ihs1506332 the Indian Health Service (ihs), Crownpoint Health Care Facility, Located In/at Crownpoint, Nm 87313 Is Seeking Capable Sources To Provide Services: Integrated Wall System Connex the Anticipated Period Of Performance Or Delivery Date Is: 15 Days Aro the Applicable North American Industry Classification System (naics) Code Assigned To This Procurement Is 339112- Surgical And Medical Instrument Manufacturing the Government Will Evaluate Market Information To Ascertain Potential Market Capacity To Provide Supplies With Those Described In This Notice. in Accordance With The Buy Indian Act, 25 U.s.c. 47, The Indian Health Service Shall Give Preference At All Times, As Far As Practicable, To Indian Economic Enterprises. If Your Firm Is Capable Of Providing The Supplies And/or Services Described In This Notice, Complete The Attached Representation Form And Submit It Along With The Rest Of The Requested Documents Identified In This Notice. the Responses To This Sources Sought Notice/market Research Will Be Used To Determine The Acquisition Strategy Such As Indian-owned Enterprise Set Asides, Total Small Business Set Aside, Any Other Socio-economic Set Aside, Or Unrestricted. note: If This Requirement Is Set-aside, Far 52.219-14 (deviation 2019-01) Limitations On Subcontracting Will Apply; Similarly-situated Entity Description Applies. This Clause Requires That The Concern Perform At Least 50 Percent (50%) Of The Cost Of The Contract, Not Including The Cost Of Materials, With Its Own Employees. submission Instructions: all Interested Sources Must Submit A Capabilities Package To The Primary Point Of Contact Listed Below, No Later Than 1/9/2025 10:00 Am (mst). at A Minimum, The Following Information Must Be Submitted To The Poc Listed In This Notice: confirm The Buy-indian Set-aside Status You Qualify For Under Following Naics Code: 339112- Surgical And Medical Instrument Manufacturing if The Proposed Naics Is Not The Customary Or Applicable Naics Relative To The Need’s Description, Include Your Firm’s Proposed Naics And Rationale For The Different Naics. fill Out The Attached Ihs Buy Indian Act Indian Economic Enterprise Representation Form. if Non-indian, Indicate Firm’s Size – Small Or Other-than-small; And Other Socio-economic Program Participation Such As Small-disadvantaged, 8(a)-certified, Hubzone, Sdvosb, And/or Wosb/edwosb a Positive Statement Of Your Intention To Submit A Quote To An Upcoming Solicitation As A Prime Contractor. provide Firm’s Uei Number. evidence Of Recent (within The Last Five Years) Experience With Work Similar In Type And Scope To Include: contract Numbers project Titles dollar Amounts percent And Complete Description Of Work Self-performed. customer Points Of Contact With Current Telephone Number And Email Address. all Of The Above Information Must Be Submitted In Sufficient Detail For A Decision To Be Made On Availability Of Interested Qualified Buy-indian Parties. If Adequate Interest Is Not Received From Buy-indian Concerns, The Solicitation May Be Issued As Another Type Of Set Aside Or Unrestricted Without Further Notice. point Of Contact: Arlynda Largo, Purchasing Agent 505-786-2530, Arlynda.largo@ihs.gov place Of Performance: Crownpoint Healthcare Facility State Highway 371 Route 9 Junction Crownpoint Nm 87313 Country: Usa this Is Not A Solicitation. *include The Hhs Buy Indian Self-representation Form *inclusion Of The Sow/pws/specs Is Not Necessary. If Included, Mark As “draft.” *do Not Include Estimated Value, Unless Construction And Only As Required At Far 36.204.

Details: Amendment 01 fda Issues The Subject Amendment 01 Incorporating All Questions And Answers Submitted In Response To The Rfq, And Extending The Quote Deadline. Please Review In Its Entirety. quotation Deadline: The Deadline For Receipt Of Quotations In Response To This Requirement Is Extended To Wednesday, January 8, 2025, At 12:00pm Et. Quote Submissions Are To Be Submitted To The Co Using Subject Line “75f40125q00050 – Cvm Evaluation Of Biological Safety Cabinets”. Quoters Shall Not Submit Electronic Documents Using Microsoft Office Suite Products That Contain The Use Of “macros”. --------------------------------------------------------------------------------------------------------------------------------------------- original Solicitation see Attached Solicitation important Dates And Information i. Mandatory Site Visit: All Quoters Must Attend At No Cost To The Government, A Site Survey: When: Tuesday, December 17, 2024, From 10:00am To 12:00pm Et. Where: Us Food And Drug Administration, Muirkirk Research Complex In Laurel, Maryland. firms Are To Arrive No Later Than 9:30am Et. The Quoter Must Electronically Provide To The Contracting Officer (co), Sheneil Green At Sheneil.green@fda.hhs.gov No Later Than 9:00am, December 16, 2024, The Below Information. All Attendees Must Have A Valid Government Issued Id: full Name And Telephone Number Of Individual Attendees company Name, Address, And Telephone Number. the Co Will Provide The Specific Site Visit Location And Point Of Contact Information Via Confirmation Email. ii. Question Deadline: Thursday, December 19, 2024, At 12:00pm Et. Questions Related To This Procurement Shall Be Submitted Via Email To Co At Sheneil.green@fda.hhs.gov. No Phone Calls Will Be Accepted. Questions Received After The Deadline Will Not Be Considered. Responses Will Be Posted To Sam.gov. iii. Quotation Deadline: The Deadline For Receipt Of Quotations In Response To This Requirement Is Tuesday, December 24, 2024, At 12:00pm Et. Quote Submissions Are To Be Submitted To The Co Using Subject Line “75f40125q00050 – Cvm Evaluation Of Biological Safety Cabinets”. Quoters Shall Not Submit Electronic Documents Using Microsoft Office Suite Products That Contain The Use Of “macros”.

Details: i) Geo-Technical & Hydro- geological Sub Surface Investigation, Surveying, Planning, Designing, Construction & commissioning of atleast. 5.0 meter dia. & required depth Radial Collector well with 250 mm dia & 300 mtr.(approx) long Infiltration Gallery with laying of LCG strainer pipe of minimum 8 mm thick including sub surface dyke to harvest 4.24 MLD raw water with 16 hours designing operation along with Pump House, Access & Pipe carrying Bridge at Subarnarekha along with 01(one) LT Station room for termination of WBSEDCL power source at vicinity of High Bank at Subarnarekha River (Kerwari), protection work at river bank, including construction of Pipe carrying Bridge with necessary Civil, Electrical (according to I.E. rules), Mechanical & all other allied works all complete. After satisfactory completion and commissioning, 3 (three) months trial run, necessary training of maintenance staff & thereafter (subsequently) 5 (five) years operation and maintenance with security /guarding arrangement and (ii)Laying of raw water rising main from intake well to CWR(D.I./K9 Pipes All types and Class) with all necessary fittings & valves for raw water rising main work, temporary road restoration works for vehicular movement and pillar carrying pipe line and Jack Pushing works for raw and clear water rising main work all complete and (iii)Construction of R.C.C Over Head Reservoirs(OHR) of 1000 cum & 600 cum capacity with 20 m Staging height per approved departmental design, drawing & Specification etc at zone – A & Zone – B including land development , approach road, internal drainage, boundary wall and Sal Bullah Piling etc and pipe line work and connection to the Distribution and inlet line all complete (iv) Surveying , Geo-Technical Investigation, Planning, Designing, Construction & Commissioning of 770 Cum. capacity Clear Water Reservoir with Pumping station, with Construction of weir with minimum 400 cum capacity sedimentation tank and Slow sand filter of area 1000 Sqm minimum, Chlorination treatment unit, ,land development ,approach road, internal drainage, and boundary wall including Electro- Mechanical works at Jhalda and all other allied works all complete. After satisfactory completion and commissioning, 3 (three) months trial run, necessary training of maintenance staff & thereafter (subsequently) 5 (five) years operation and maintenance with security /guarding arrangement within Jhalda Municipality under AMRUT 2.0 Project.