Survey Tenders

Details: General Statement: this Is A Combined Synopsis/solicitation For Commercial Items Issued By The Air Force Research Laboratory/pzleq, Wright-patterson Air Force Base, Ohio. This Announcement Constitutes The Only Solicitation Being Issued For The Requirement Described Herein. solicitation Information solicitation Number: Combo-afrl-pzleq-2025-0008 [x] Request For Quotation (rfq) [ ] Request For Proposal (rfp) [ ] Invitation For Bid (ifb) regulation Identification: this Solicitation And The Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular (fac) 2023-01 Effective 30 Dec 2022. notice Of Small Business Set-aside: set-aside Type small Business naics Size Standard 334517 listing/description Of Items: clin #: 0001 description narda Fieldman Broadband Meter And Four (4) Probes. the Vendor Shall Provide Four (4) Narda Fieldman Logging Broadband Field Meters With Three (3) Each Of The Following Probes: 1) Efd0391, 2) Efd5091, 3) Hfd0361, And 4) Hfd0191. The Narda Fieldman Meter And Probes Shall Possess The Following Salient Characteristics: the Detector Shall Possess The Following Specifications: shall Have Isotropic Probes To Cover 100khz To 60ghz shall Have Large Graphical Display shall Have Back Lit Monochrome Lcd; Readable Even In Bright Daylight shall Have Intelligent Probe Interface With Automatic Probe Parameter Detection shall Include Fully Automatic Zeroing shall Have Extensive Memory For Logging Of Up To 5000 Results shall Have Gps Interface And Mountable Receiver For Positioning Data Documentation (optional) shall Include Graphical User Interface (gui) shall Have Simple-to-use 9 Button Keypad shall Have Hold Button Soft Key For Freezing Measurement Display During Readings shall Have User Defined Setups Can Be Saved For Repetitive Survey Needs shall Have Keypad That Can Be Locked To Guard Against Inadvertent Inputs shall Have User Selectable Auto-off Feature To Save Battery Life shall Include 5 Types Of Results That Can Be Displayed: Actual, Minimum, Maximum, Average, Maximum Average history Mode Shall Operate Continuously In The Background, Allowing Display Of Past Readings At Any Time, Up To 8 Hours shall Include Selectable Units: V/m, A/m, W/m², Mw/cm², And % Of Standard When Using Shaped Frequency Response Probes shall Include Stored Standards And Guidance In The Nbm Memory Allow Simultaneous Display Readings As % Of Standard If Frequency Is Known shall Include Data Memory For Up To 5000 Measurements shall Have Time Averaging: 4 Seconds To 30 Minutes, In 2-second Intervals shall Have Variable Alarm Threshold Setting shall Have Audible Indication Of Increasing Or Decreasing Field Strength shall Include Automatic Detection Of Probe Type And Calibration Information shall Be Fully Automatic And Variable Zero Adjustment Interval Times shall Include Additional Optical Input For Separating Probe From Meter shall Have Pc Connection Via Usb Or Optical Interface shall Have Trigger Input For Externally Initiating Readings To Be Taken shall Include Nbm-ts Software Enables Remote Controlled Measurements shall Be Able To Have Screenshots That Can Be Downloaded To Pc delivery Information: fob: [x] Destination [ ] Origin place Of Delivery: 711 Hpw/oml attn: Brandi Tschuor 2510 Fifth St., Bldg. 840 wright-patterson Afb, Oh 45433 requested Date Of Delivery: 30 Days Upon Receipt Of Order instructions To Offerors: the Provision At Far 52.212-1, Instructions To Offerors – Commercial (jun 2020), Applies To This Acquisition. addenda: N/a evaluation Of Offers: the Provision At Far 52.212-2, Evaluation -- Commercial Items (oct 2014), Will Be Used To Evaluate Quotes Received. the Government Will Award A Contract Resulting From This Solicitation To The Responsible Offeror Whose Quote Conforming To The Solicitation Will Be Most Advantageous To The Government, Price And Other Factors Considered. the Following Factors Shall Be Used To Evaluate Offers: (lowest Price Technically Acceptable Or Price Trade-off) Pick Which One Matches (1) Price (2) Technical Acceptability (a) In Order For This Quote To Be Considered “technically Acceptable” It Must Meet: (i) All Specification Requirements In The Sow offerors Shall Assume That The Government Has No Prior Knowledge Of Its Facilities, Capabilities, And Experience And Will Base The Evaluation Solely On The Information Presented In The Offeror’s Proposal. the Government Reserves The Right To Award All, Some, Or None, Of The Items Listed In This Solicitation. The Government Reserves The Right To Resolicit If Results Garner Only One Qualifying Quote, If It’s Determined To Be In The Best Interests Of The Government. offeror Representations And Certifications: offerors Must Include A Completed Copy Of The Provision At Far 52.212-3, Offeror Representations And Certifications -- Commercial Items (feb 2021), With Your Quote. if Offeror Has Completed Annual Representations And Certifications In System For Award Management (sam), Then Only Paragraph (b) Needs To Be Submitted With Quote. if Offeror Has Not Completed Annual Representations And Certifications In Sam Then Paragraphs (c-v) Need To Be Submitted. contract Terms & Conditions: the Clause At Far 52.212-4, Contract Terms And Conditions -- Commercial Items (oct 2018), Applies To This Acquisition. addenda: N/a required Terms & Conditions To Implement Statutes Or Orders: the Clause At Far 52.212-5, Contract Terms And Conditions Required To Implement Statutes Or Executive Orders -- Commercial Items (jan 2021), Applies To This Acquisition. the Following Clauses Are Incorporated Via Paragraph (b) And Considered Applicable To This Acquisition: far 52.219-6 notice Of Total Small Business Set Aside far 52.219-28 post Award Small Business Program Representation far 52.222-3 convict Labor far 52.222-19 child Labor-cooperation With Authorities And Remedies far 52.222-21 prohibition Of Segregated Facilities far 52.222-26 equal Opportunity far 52.222-50 combating Trafficking In Persons far 52.223-18 encouraging Contractor Policies To Ban Text Messaging While Driving far 52.225-1 buy American--supplies far 52.225-13 restrictions On Certain Foreign Purchases far 52.232-33 payment By Electronic Funds Transfer- System For Award Management additional Contract Requirements: (1) Offeror Shall Include All Warranty Requirements And Documentation With Quote. (2) Offerors Shall Identify How Long The Quote Is Valid. additional Provisions And Clauses Applicable To This Requirement: far 52.203-19 prohibition On Requiring Certain Internal Confidentiality Agreements Or Statements provision far 52.204-7 system For Award Management clause far 52.204-13 system For Award Management Maintenance clause far 52.209-6 protecting The Government's Interest When Subcontracting With Contractors Debarred, Suspended, Or Proposed For Debarment clause far 52.232-39 unenforceability Of Unauthorized Obligations clause far 52.232-40 providing Accelerated Payments To Small Business Subcontractors clause far 52.246-16 responsibility For Supplies clause far 52.247-34 f.o.b. Destination provision far 52.252-1 solicitation Provisions Incorporated By Reference (fill-in Text) - Https://www.acquisition.gov/ clause far 52.252-2 contract Clauses Incorporated By Reference (fill-in Text) - Https://www.acquisition.gov/ clause dfars 252.203-7000 requirements Relating To Compensation Of Former Dod Officials clause dfars 252.203-7002 requirement To Inform Employees Of Whistleblower Rights provision dfars 252.203-7005 representation Relating To Compensation Of Former Dod Officials clause dfars 252.204-7003 control Of Government Personnel Work Product provision dfars 252.204-7004, Alt A, system For Award Management Alternate A clause dfars 252.204-7015 notice Of Authorized Disclosure Of Information For Litigation Support clause dfars 252.211-7003 item Unique Identification And Valuation clause dfars 252.223-7008 prohibition Of Hexavalent Chromium clause dfars 252.225-7001 buy American And Balance Of Payments Program clause dfars 252.225-7002 qualifying Country Sources As Subcontractors clause dfars 252.225-7048 export-controlled Items clause dfars 252.232-7003 electronic Submission Of Payment Requests clause dfars 252.232-7006 wide Area Workflow Payment Instructions clause dfars 252.232-7010 levies On Contract Payments clause dfars 252.225-7012 preference For Certain Domestic Commodities clause dfars 252.243-7001 pricing Of Contract Modifications clause dfars 252.244-7000 subcontracts For Commercial Items clause affars 5352.201-9101 ombudsman (fill-in Text) ombudsman: Afrl/pk Director alternate Ombudsman: Afrl/pk Deputy Director 1864 Fourth St wright-patterson Afb Oh 45433-7130 937-904-9700 afrl.pk.workflow@us.af.mil dpas Applicability: this Requirement Is Not Applicable To The Defense Priorities And Allocations System (dpas). solicitation Closing Information: quotes Are Due By: 3 January 2025 @ 4:00 Pm Est. quotes Must Be Received By The Closing Date Stated Above. Submit Quotes By Email. point Of Contact: the Point Of Contact For This Acquisition For Any Questions And For Submission Of Quotes Is: name: Mr. Jason B. Sav title: Contract Specialist email: Jason.sav@us.af.mil

Details: Amendment 0004 Has Been Posted (see Attachments) ----------------------------------------------------------------------------------------------------------- amendment 0003 Has Been Posted (see Attachments) ----------------------------------------------------------------------------------------------------------- amendment 0002 Has Been Posted (see Attachments) ----------------------------------------------------------------------------------------------------------- amendment 0001 Has Been Posted (see Attachments) ----------------------------------------------------------------------------------------------------------- planned Award Year: 2025 contracting Office Zip Code: 96915 description:environmental Idiq Services For Hazardous Waste, Hazardous Material, Other Regulated Waste, And Spill Response At Joint Region Marianas, Guam. this Requirement Is For Environmental Services For Hazardous Waste, Hazardous Material, Other Regulated Waste, And Spill Response For All Supported Component And Tenant Commands Under Joint Region Marianas. The Work (task Orders) Includes Operation Of A Conforming Storage Facility (csf); Management Of Less-than-90-day Storage Facilities; Management Of Satellite Accumulation Sites (sas) And Initial Accumulation Points (iap); Daily Management, Collection And Disposal Of Hazardous Material (hm), Hazardous Waste (hw), And Other Regulated Waste (orw) Such As But Not Restricted To Asbestos, Lead-based Paint, And Pcbs; Occasional Management, Disposal, And Collection Of Non-hw; Sampling, Testing, And Laboratory Analysis For Hazardous Waste, Regulated Waste, And Unknown Waste Determination; Oil And Hazardous Substance Spill Response, Cleanup, Sampling, Laboratory Analysis, And Disposal. procurement Method: Far Part 15 Contracting By Negotiation Utilizing The Tradeoff Process In Accordance With Far 15.101-1. contract Type: This Acquistion Is For One (1)combination Firm Fixed-price (ffp) Indefinite Delivery Indefinite Quantity (idiq) Service Contract Comprised Of Recurring And Non-recurring Work Items. contract Term:the Contract Term Will Be A Base Period Of 12 Months, With Four (4) 12-month Option Periods. The Total Term Of The Contract, Including Options, Will Not Exceed 60 Months. If The Government Does Not Award A Follow-on Contract In Time, The Government May Require The Contractor To Continue Performance For An Additional Period Up To Six (6) Months Per Far Clause 52.217-8. Concurrently With The Award Of The Basic Contract, The Government Intends To Issue A Task Order To Obligate The Contract Minimum Guarantee For Clin 0001, Mobilization And Base Period Recurring Work. The Maximum Value Of The Contract Will Be The Total Value Of All The Contract Line Items In The Schedule. this Contract Will Replace A Contract For Similar Services Awarded In Fy2020 For $9,311,231.46 (firm Fixed-price Portion) And $15,688,768.54 (indefinite Quantity Estimate/maximum Value Per Year). Information About The Current Contract And The Incumbent Contractor (e.g., Value Of Last Option Exercised, Firm Name, Address, Etc.) Is Included In Notice No. 1 General Info. Requests Under The Freedom Of Information Act Are Not Required For This Information. solicitation Documents: Offerors Can View And/or Download The Solicitation, And Any Attachments, At Https://www.sam.gov Under “contract Opportunities.” No Hard Copies Will Be Provided. Notifications Of Any Amendments To The Solicitation Will Be Made Available Https://www.sam.gov. It Is The Sole Responsibility Of The Offeror To Continually View The Websites For Any Amendments Issued To The Solicitation. restricted To Small Business:the Proposed Contract Listed Here Is 100 Percent Small Business Set-aside. The Government Will Only Accept Offers From Small Business Concerns. source Selection Procedures:the Solicitation Utilizes Source Selection Procedures Which Require Offerors To Submit A Technical Proposal, Past Performance And Experience Information, And A Price Proposal For Evaluation By The Government. place Of Performance: The Place Of Performance For This Contract Is Naval Base Guam (nbg), Andersen Air Force Base (aafb) And Marine Corps Base Camp Blaz (mcbcb), Joint Region Marianas, Located In Guam. sources Sought: A Sources Sought Notice (n4019225r5000) For This Procurement Was Posted On 15 October 2024 On Sam.gov, And A Market Survey Was Conducted That Included An Assessment Of Relevant Qualifications And Capabilities Of Potential Firms. As A Result Of The Market Research Analysis, A Determination Was Made To Set Aside This Procurement For Small Business Concerns. The Navfac Marianas Business Office Concurs With This Decision. written Pre-proposal Conference: In Lieu Of Pre-proposal Conference Meeting, Written Pre-proposal Conference Slides (attachment Jl-13) Relative To This Rfp Are Included In This Solicitation. Offerors Are Strongly Encouraged To Read The Presentation Slide And Provide Comments, Constructive Criticism, And Identification/notification Of Rfp Inconsistencies Using Attachment Jl-1 Of The Solicitation. Offerors Are Requested To Submit Completed Attachment Jl-1, At Least Five (5) Days Prior To The Site Visit To Ms. Jerica Santos Via Email At Jerica.a.santos.civ@us.navy.mil. All Questions Must Be In Writing. Responses To Submitted Questions And The Written Pre-proposal Conference Information Will Be Posted Via Solicitation Amendment. site Visit:a One-time Site Visit Is Scheduled For Tuesday, 17 December 2024 At Multiple Locations On Naval Base Guam (nbg) And Andersen Air Force Base (aafb). For The Nbg Site Visit, Participants Must First Meet Promptly At The Nbg Visitor Control Center At 9:00 A.m. (chst). For The Aafb Site Visit, Participants Must First Meet Promptly At The Aafb Visitor Control Center At 2:00 P.m. (chst). At Both Meeting Locations, Participants Must Sign-in And Will Be Provided Maps To The Site Visit Locations. However, The Government Will Lead All Attendees By Motorcade Throughout The Site Visit. all Attendees Are Required To Have Base Access To Enter Nbg And Aafb Sites. Due To Potential Lengthy Processing Times For Base Access, The Government Recommends Utilizing Contractor Participants Who Already Have Current Base Access To Nbg And Aafb Sites.it Is The Contractor’s Responsibility To Ensure That Attendees Have Base Access On This Date. please Limit The Number Of Attendees To Two (2) Per Contractor. attendees Must Wear Approriate Safety Gear (hard Hat, Reflective Vest And Steel Toe Shoes). the Government Will Not Provide Answers To Verbal Questions Asked Before, During, Or After The Site Visit. Offerors Are Requested To Provide Any Questions That They May Have During The Site Visit In A Written Format Using Attachment Jl-1. important Note: Government Remarks And Explanations Addressed During The Site Visit Shall Not Qualify Or Alter The Terms And Conditions Of The Solicitation. Only The Contracting Officer May Amend The Solicitation, Including The Performance Work Statement, And Will Do So In Writing nbg Access interested Attendees Requiring Base Access To Nbg Must Complete The Following: 1.secnav 5512 Form (attachment Jl-4) 2.one (1) Base Access Request Form (attachment Jl-5) Per Company And Obtain The Government Sponsor’s Signature (email Jerica.a.santos.civ@us.navy.mil And Leah.d.berman.civ@us.navy.mil), And 3. Submit Hard Copies Of All Required Documents And Personal Identification To The Nbg Visitor Control Center Located Outside The Main Navy Base Front Gate In Santa Rita, Guam. note: Interested Attendees That Are Foreign Nationals Must Also Complete A Foreign National Biometric Data Form (attachment Jl-6). nbg Access Forms Must Be Submitted To Jerica.a.santos.civ@us.navy.mil And Leah.d.berman.civ@us.navy.mil On Or Before 12 December 2024, 2:00 P.m. (chst) For Review And Approvals Prior To Submitting Hard Copies To Nbg Visitor Control Center. please Direct Any Nbg Base Access Questions And Concerns To The Nbg Visitor Control Center At (671) 339-1280. aafb Access interested Attendees Requiring Base Access To Aafb Must Complete The Following: 1. Base Access Form - Contractor Memorandum (fill-in Information In Red) (attachment Jl-7) 2.base Access Affidavit 2020 (completed For Each Visitor) (attachment Jl-8) 3.interstate Identification Index (iii) Log (attachment Jl-9) -complete In Accordance With The “how To Fill Out The Iii Log” (attachment Jl-10) 4.either A U.s. Passport Or Real Id Act Driver’s License/id. See Base Access Entry Policy (attachment Jl-11). 5.foreign National Access Request Form (as Applicable To Include Required Supporting Documentation) (attachment Jl-12) 6.indicate If The Individual Has An Approved Dbids the Completed Forms Shall Be Submitted To Jerica.a.santos.civ@us.navy.mil And Leah.d.berman.civ@us.navy.mil On Or Before 12 December 2024, 2:00 P.m. (chst) For Review And Approvals. Contractors Are Responsible For The Submission Of Signed Base Access Requests (bars) To The Visitor Control Center (vcc) Via Email At 36sfs.vcc@us.af.mil In Order To Obtain A Tracking Number. on The Day Of The Site Visit, Contractors Who Do Not Have Dbids Shall Bring Their U.s. Passport Or Real Id Compliant Id, A Copy Of Their “base Access Affidavit” And “iii Log” And Tracking Number To The Vcc (northgate), Andersen Air Force Base For Pick-up Of Approved Base Pass. Please Allow Ample Time To Do So, As Long Lines May Cause Delays. please Be Informed: The Visitor Control Center (northgate) Requires Sufficient Processing Time For Each Visitor. Consequently, If An Attendee Submits The Application Forms After The Specified Due Date, They May Not Be Able To Attend The Site Visit. the Furnishing Of The Above Information, Including Your Social Security Number, Is Voluntary. However, Your Failure To Furnish All Or Part Of The Information Request May Result In The Government's Denial Of Access To The Jobsite. Any Of The Above Information Furnished By You And Protected Under The Privacy Act Shall Not Be Released Unless Permitted By Law And/or You Have Consented To Such Release. notice To Offerors: The Government Reserves The Right To Cancel This Solicitation, Either Before Or After Closing Of Receipt Of Proposals. Offerors Are Cautioned To Carefully Read Instructions And Ensure Proposals Are Submitted In Accordance With The Solicitation, Section L.

Details: Pre-solicitation Notice 36c250-24-ap-6279 - 1 amendment/modification sam-notice 36c25025r0016 saginaw-auburn Annex, Michigan the U.s. Department Of Veterans Affairs (va) Seeks Expressions Of Interest For 25,000 American National Standards Institute/building Owners & Managers Association (ansi/boma) Of Space In Saginaw (auburn), Michigan notice: This Advertisement Is A Notice Of A Potential Opportunity. This Advertisement Is Not A Solicitation For Offers, Nor Is It A Request For Lease Proposals. The Purpose Of This Advertisement Is To Identify Potential Sources And Suitable Locations And Is Not Intended To Pre-qualify Or Disqualify Any Potential Offers. The Government Will Not Pay For Any Costs Incurred As A Result Of This Advertisement. An Rlp May Or May Not Be Released. The Government Cannot Provide Any Warranty, Expressed Or Implied, As To The Accuracy, Reliability, Or Completeness Of Contents Of The Furnished Information Found Within This Advertisement; Government Is Under No Obligation To Respond To And Is Unable To Answer Any Inquiries Regarding This Advertisement. The Naics Code Is 531120 Lessors Of Nonresidential Buildings, And The Small Business Size Standard Is $34 Million. the Department Of Veterans Affairs (va) Is Also Conducting Market Research, Seeking Capable Sources That Are Classified And Registered At Www.vip.vetbiz.gov As Either Service Disabled Veteran Owned Small Business (sdvosb) Or Veteran Owned Small Business (vosb) That Are Interested In Leasing Space To The Department Of Veterans Affairs. respondents Are Advised That The Government Assumes No Responsibility To Award A Lease Based Upon Responses To This Advertisement. contracting Office Address: Network Contracting Office 10, Suite 325 - 8888 Keystone Crossing Indianapolis, In 46240 description: The Department Of Veterans Affairs Seeks To Lease 25,000 Aboa Square Feet (sf) Of Space And 150 Parking Spaces For Use By The Va As A Primary Care Annex. The Space Shall Be Located Within The Delineated Area Stated Below. Va Will Consider Space Located In An Existing Building As Well As A Building Being Constructed For Multi-tenant Use And Not Specifically A Build-to-suit For Va Use Only. Aboa Is Generally Defined As The Space Remaining Once Common Areas, Lessor Areas, And Non-programmatic Areas Required By Code Are Deducted From The Rentable Square Feet Of The Facility. Aboa Does Not Include Areas Such As Stairs, Elevators, Mechanical And Utility Rooms, Ducts, Shafts, Vestibules, Public Corridors, And Public Toilets Required By Local Code. va Will Provide All Detailed Definitions, Should A Solicitation For Offers Or Request For Proposals Be Issued For This Project. lease Term: Not To Exceed 20 Years. updated-delineated Area: To Receive Consideration, Submitted Properties Must Be Located Within The Following Area Described Below, Which Is Bound By The Following Roads, Or Must Front On Any Of The Following Boundary Lines: north: Wheeler Road west: Waldo Ave.; S Saginaw Rd; south: Hotchkiss Rd Milner Rd; 84/westside Saginaw Rd; east: 2 Mile Road see The Below-delineated Area Map For Further Clarification Of The Boundaries Of The Delineated Area. additional Requirements For Submissions: offered Space Must Be Located Within One Building. offered Space Should Preferably Be Located On The First (1st) Floors And One Single Floor. if The Offered Space Is Above The First (1st) Floor, A Minimum Of One (1) Passenger Elevator And One (1) Combination (passenger/freight) Elevator Must Be Provided. bifurcated Sites, Inclusive Of Parking, Are Not Permissible. the Following Space Configurations Will Not Be Considered: Space With Atriums, Extremely Long Or Narrow Runs Of Space (more Than Twice As Long As Wide), Irregularly Shaped Space Configurations Or Other Unusual Building Features Adversely Affecting Usage. column Size Cannot Exceed Two (2) Feet Square And Space Between Columns And/or Walls Cannot Be Less Than Twenty (20 ) Feet offered Space Cannot Be In The Fema 1-percent-annual-chance Floodplain (formerly Referred To As 100-year Floodplain) offered Space Must Be Zoned For Va S Intended Use By The Time Initial Offers Are Due. offered Space Will Not Be Considered If Located In Close Proximity To A Property With Incompatible Uses, Including But Not Limited To The Following Uses: Liquor Establishments, Dispensaries, Treatment Centers, Correctional Facilities, Where Firearms Are Sold/discharged, Railroad Tracks, Or Within Flight Paths. offered Space Will Not Be Considered If Located In Close Proximity To Residential Or Industrial Areas. offered Space Must Be Located In Proximity To Public Transportation. A Commuter Rail, Light Rail, Or Bus Stop Shall Be Located Within The Immediate Vicinity Of The Building; offered Space Will Not Be Considered If The Location Is Irregularly Shaped. space Will Not Be Considered Where Apartment Space Or Other Living Quarters Are Located Within The Same Building. offered Space Must Be Located In Close Proximity To Amenities Including But Not Limited To Restaurants, Hotels, Pharmacies, And Shopping. offered Space Must Be Located In Close Proximity To A Hospital Or Stand-alone Emergency Room Center And A Fire Department; offered Space Must Be Easily Accessible To Multiple Major Highways Which Provide Multiple Routes Of Travel; structured Parking Under The Space Is Not Permissible. offered Space Must Meet Federal And Local Government Requirements For Fire Safety, Physical Security, Accessibility, Seismic, And Sustainability Standards Per The Terms Of The Solicitation For Offers Or Requests For Proposals. a Fully Serviced Lease Is Required. offered Space Must Be Compatible With Va S Intended Use. all Submissions Must Include The Following Information: name And Address Of Current Property Owner; address Or Described Location Of Building; location On A Map, Demonstrating The Building Lies Within The Delineated Area; A Statement As To Whether The Building Lies Within The Delineated Area; description Of Ingress/egress To The Building From A Public Right-of-way; description Of The Uses Of Adjacent Properties; fema Map Of Location Evidencing Floodplain Status; a Description Of Any Planned Land Development Or Construction That Will Affect The Site, Including Neighboring Projects And Road/utility Line Construction; site Plan Depicting The Property Boundaries, Building, And Parking; a Document Indicating The Type Of Zoning; a Description Of Any Changes To The Property Necessary To Be Compatible With Va S Intended Use; building Owners Shall Provide Evidence Of Ownership. Non-owners (e.g. Prospective Developers/lessors) Submitting A Building Shall Provide Evidence Of Permission Or Authority Granted By The Property Owner To Submit The Building To Va For Development; any Information Related To Title Issues, Easements, And Restrictions On The Use Of The Building; a Statement Indicating The Current Availability Of Utilities Serving The Proposed Space Or Property. if You Are Qualified As A Veteran Owned Small Business (vosb) Or Service Disabled Veteran Owned Small Business (sdvosb) Under Naics Code 531120 Lessors Of Nonresidential Buildings With A Small Business Size Standard Of $34 Million, Please Read The Below Attachment, Entitled, Vosb Or Sdvosb Status . You Are Invited, But Not Required To Submit A Capabilities Statement; market Survey (estimated): January 2025 occupancy (estimated): Fy 2025-2026 all Interested Parties Must Respond To This Advertisement No Later Than January 10, 2025, At 3:00 P.m. Local Time. please Submit Your Response (electronic) To: lisa Newlin Lisa.newlin@va.gov Lee Grant Lee.grant@va.gov attachment - Vosb Or Sdvosb Status this Is Not A Request For Proposals, Only A Request For Information For Planning Purposes, And Does Not Constitute A Solicitation. A Solicitation May Or May Not Be Issued. the Naics Code For This Procurement Is [531120 Lessors Of Nonresidential Buildings], And The Small Business Size Standard Is [$34 Million]. Responses To This Notice Will Assist In Determining If The Acquisition Should Be Set-aside For Sdvosb Or Vosb Concerns In Accordance With 38 Usc § 8127. the Magnitude Of The Anticipated Construction/buildout For This Project Is: __ (a) Less Than $25,000; __ (b) Between $25,000 And $100,000; __ (c) Between $100,000 And $250,000; __ (d) Between $250,000 And $500,000; __ (e) Between $500,000 And $1,000,000; __ (f) Between $1,000,000 And $2,000,000; __ (g) Between $2,000,000 And $5,000,000; X (h) Between $5,000,000 And $10,000,000; __ (i) Between $10,000,000 And $20,000,000; __ (j) Between $20,000,000 And $50,000,000; __ (k) Between $50,000,000 And $100,000,000; __ (l) More Than $100,000,000. va Makes Monthly Rental Payments In Arrears Upon Facility Acceptance And May Elect To Make A Single Lump-sum Payment Or Amortize Over The Course Of The Firm Term For Specified Tenant Improvements. Va Makes No Progress Payments During The Design Or Construction/build-out Phases Of The Project. project Requirements: This Sources Sought Notice Seeks Information From Potential Offerors Who Are Capable Of Successfully Performing A Lease Contract, Including The Design And Construction Of The Facility Described Above, For A Term Of Up To 20 Years, Inclusive Of All Options, As Well As All Maintenance And Operation Requirements For The Duration Of The Lease Term, At A Fair And Reasonable Price. More Information On Va S Requirements Can Be Found On The Technical Information Library At The Following Link: Https://www.cfm.va.gov/til/leasing.asp . sdvosb And Vosb Firms Are Invited To Provide Information To Contribute To The Market Research For This Project. Sdvosb And Vosb Firms Must Be Registered In Va S Vendor Information Pages (vip) Site At Https://www.vip.vetbiz.gov/. All Business Concerns Must Have The Technical Skills And Financial Capabilities Necessary To Perform The Stated Requirements. All Business Concerns Are Requested To Submit A Capabilities Statement If They Are Interested In Participating In This Project. A Submission Checklist And Information Sheets Are Provided Below For Firms To Fill Out And Submit, Which Will Serve As The Firm S Capabilities Statement. capabilities Statement: 1. Company Name, Address, Point Of Contact, Phone Number, Experian Business Identification Number, And E-mail Address; 2. Evidence Of Sdvosb Or Vosb Status Through Registration At Vip (https://www.vip.vetbiz.gov); 3. Evidence Of Ability To Offer As A Small Business Under Naics Code [531120] And Listing In The System For Award Management (www.sam.gov ), Including A Copy Of The Representations And Certifications Made In That System; 4. A Summary Describing At Least Three (3) Projects Of Similar Size And Scope Completed In The Past Five (5) Years That Demonstrate Your Company S Experience Designing, Constructing, And Managing Federal Leased Facilities Or Health Care Facilities Relevant To The Project Described Above. (3-page Limit); 5. Evidence Of Capability To Obtain Financing For A Project Of This Size. if Desired, The Company May Also Submit A Narrative Describing Its Capability. although This Notice Focuses On Sdvosb And Vosb, We Encourage All Small Businesses And Other Interested Parties To Respond For Market Research Purposes. capabilities Statement submission Checklist And Information Sheet saginaw-auburn, Mi Lease Sources Sought Notice company Name: __________________________________________ company Address: __________________________________________ dunn And Bradstreet Number: __________________________________________ uei Number: __________________________________________ point Of Contact: __________________________________________ phone Number: __________________________________________ email Address: __________________________________________ the Following Items Are Attached To This Capabilities Statement: evidence Of Sdvosb Or Vosb Status Through Registration At Vip (https://www.vip.vetbiz.gov/); evidence Of Ability To Offer As A Small Business Under Naics Code [531120] And Listing In The System For Award Management (www.sam.gov), With Representations And Certifications; a Summary Describing At Least Three (3) Projects Of Similar Size And Scope Completed In The Past Five (5) Years That Demonstrate The Company S Experience Designing, Constructing, And Managing Federal Leased Facilities Or Health Care Facilities Relevant To (input Project Specific Nusf). (3-page Limit); And evidence Of Capability To Obtain Financing For A Project Of This Size. if Desired, The Company May Also Submit A Narrative Describing Its Capability, Not To Exceed Two (2) Pages. by: _________________________________________________ (signature) __________________________________________________ (print Name, Title, Date)

Details: The subject of the public contract is construction work and related supplies and services consisting in the reconstruction of the existing bridge structure, which transfers local traffic over the bed of a watercourse with a permanent flow (malé Elbe – Vodní Linie Idvt: 10100231). The existing bridge shows a number of faults that need to be resolved as soon as possible. A separate diagnostic construction and technical survey was prepared for the bridge structure, including recommendations for further management of the bridge structure. For this reason, the contracting authority decided to carry out the reconstruction of the existing bridge structure within the given scope, while retaining the existing horizontal supporting structure. The necessary modification of the local traffic on both bridgeheads is also being addressed as part of the reconstruction. The reconstruction requires the lateral relocation of the cable line.

Details: The Medical Technology Enterprise Consortium (mtec), In Support Of The U.s. Army Medical Research And Development Command (usamrdc), And Defense Health Agency (dha), Is Excited To Post This Request For Project Information (rpi) Focused On Surveying The Current Manufacturing Capabilities Of Single Blood Donor/storage Bags Within The Bounds Of The Contiguous United States. purpose Of The Project Information Paper: this Request For Project Information (rpi) Contains Background Material And Guidance For The Preparation Of Project Information Papers To Mtec. Project Information Papers Will Be Reviewed By The Sponsor And Used In A Manner That Shapes Dha Efforts In This Technology Space. The Results Of The Project Information Paper Submission Will Serve To Assess The Development Landscape And Potentially Focus Efforts That Will Follow. as A Note: This Rpi Is Issued Solely For Information And Planning Purposes And Does Not Constitute A Solicitation. Neither Unsolicited Proposals Nor Any Other Kind Of Offers Will Be Considered For Award In Response To This Rpi. Responses To This Notice Are Not Offers And Will Not Be Accepted By The Government To Form A Binding Contract. Responders Are Solely Responsible For All Expenses Associated With Responding To This Rpi. All Information Received In Response To This Rpi That Is Marked “proprietary” Will Be Handled Accordingly. focus Area Of Interest: in Accord With The Department Of Defense (dod) 2022 National Defense Strategy Identifying Building Enduring Advantages, There Is An Effort To Invest In Manufacturing Capabilities Within The Continental United States (conus) As Part Of Efforts To Bolster The Defense Industrial Base (dib) And Securing Domestic Supply Chains. In Recent Years, There Has Been A Shortage Of Much needed Blood Storage Bags, And This Is Acute Within The Dod System Where There Is A Requirement For Singly Wrapped Blood Bags For Use In Far Forward Situations. “today’s Dib Requires Additional Investment From Private And Government Sources To Modernize Infrastructure And Capacity To Provide Military Capabilities At The Speed And Scale Necessary For The U.s. To Prevail In A Near‐peer Conflict. To Adapt And Fortify Our Existing Capabilities And Capacities, The Department Needs To Focus On Investment And To Buy Down Supply Chain Risk And Expand Capacity.” dod’s Diverse Warfighting Capabilities Means That Sailors, Marines, Soldiers, Airmen, Guardians And Joint Special Operations Service Members Operate In A Vast Array Of Challenging, Remote, And Austere Environments. In Forward Positions There Is A High Probability Of Traumatic Injury And Wounds Leading To Blood Loss. Hemorrhage Is The Leading Cause Of Death In Combat Zonetrauma. The Gold Standard For Immediate Treatment Of Hemorrhage Is Transfusion Of Whole Blood However, The Availability Of Whole Blood And Conventional Blood Products On Forward Missions Is Challenging. In Recent Years There Have Been Supply Chain Disruptions Across The Continuum Of Military And Civilian Products. This Includes Components Used In The Manufacture Of Blood Bags From The Polymer Components To The Anticoagulant/preservative Solutions Within The Bag. This Has Resulted In Shortages Of Single Blood Storage Kits Most Often Used In Austere Environments Especially For Walking Donors. According To The Us Food And Drug Administration center For Biologics Evaluation And Regulation For Regulated Products Shortages Website, The Shortage Of Series Of Blood Collection Bag Kits And Products Is Described As Ongoing. Shortages Of Ingredients, Components And Manufacturing Supplies, And Release Timing Issues Are Intermittent And Unpredictable. Product May Be Placed On Allocation As Necessary To Manage Reduced Or Unavailable Supply. This Vital Product Is Needed In Steady Supply To Meet The Needs Of Aiding Wounded Warriors Within The Golden Hour, Or Sooner, Out In The Field At The Point Of Injury With Donated Blood. Our Approach Is To Stand Up Or Bolster Domestic Production. the Government Seeks Project Information Papers Regarding The Development Of A Prototype System Detailing The Following: production Of A Bag Within The Contiguous United States Within 2 Years Of Award That Meets The Following Existing Specification: individually Wrapped Single Aseptic Collection Bag compliant With Fda (21 Cfr 864.9100), Iso 10993 And 3826, Usp And Mil 810h Standards And Guidance. supports Whole Blood Donor Phlebotomy Of 500ml (+/‐10%, 450‐550 Ml) Or 450 Ml (+/‐10%, 405‐495 Ml). contains A Solution Of Anticoagulant And Preservatives Meeting The Usp Standards That Allows For Storage Of Blood For At Minimum 21 Days Up To 35 Days. foil Wrapping That Is Easy To Open Requiring No Tools And If Practical, Textured For Better Grip With Brightly Marked Notches Not Only At The Corners But Also In The Center Of The Packaging. the Manufactured Bags Should Have A Shelf Life Of 18 ‐ 24 Months At Room Temperature. appropriate Fatigue And Distortion Testing. experience Designing Medical Devices Specifically Blood Products And Adhering To Verification And Validation Guidance. within 2 Years, Capability To Manufacture No Less Than 10,000 Standard Blood Donor/storage Bags Per Year And Have A Surge Capability Plan During Times Of Increased Demand For Full Single Blood Bag Kits With Compliant Materials And Processes. any Established Current Good Manufacturing Practice (cgmp) Ready Methods With Fully Designed Hardware And Functional Disposables. manufacturers Implementing Gmp That Require Financial Assistance To Meet All Requirements Of The U.s. Food And Drug Administration (fda) With Clear Standardoperating Procedures And Compliance Documentation (21 Cfr 864.9100) Shall Provide Appropriate Substantiating Information, Including A Workflow For Obtaining Gmp Certification. demonstrable Redundancy In Sourcing Of Raw Materials From Multiple Vendors. a Notional Rough Order Of Magnitude Estimate Of Proposed Program Cost Inclusive Of Any Cost Share And Other Funding Sources That The Offeror Has Secured. requirements Of The Project Information Paper: project Information Papers Should Clearly Describe Expertise In Each Of The Aforementioned Areas As It Relates To The Manufacturing Of Blood Bags. Interested Parties Are Encouraged To Submit Project Information Papers Using The Template Included In Addendum 1 Of This Rpi. mtec Is Seeking Input From Both Mtec Members And Non‐members Via A Project Information Paper To Be Considered By The Government. Project Information Papers Will Be Shared With The Reviewers Under Non‐disclosure Agreements. project Information Papers May Be Submitted At Any Time During The Submission Period But No Later Than The Due Date And Time Specified On The First Page Of This Rpi Using Bids: Https://submissions2.ati.org/ati2/portal.nsf/start?readform. See Addendum 2 Of This Rpi For Further Information Regarding Bids Registration. Mtec Membership Is Not Required For Submission Of Project Information Paper. mtec: the Mtec Mission Is To Assist The U.s. Army Medical Research And Development Command (usamrdc) And The Defense Health Agency (dha) By Providing Cutting‐edge Technologies And Supporting Life Cycle Management To Transition Medical Solutions To Industry That Protect, Treat, And Optimize Warfighters’ Health And Performance Across The Full Spectrum Of Military Operations. Mtec Is A Biomedical Technology Consortium Collaborating With Multiple Government Agencies Under A 10‐year Renewable Other Transaction Agreement (ota), Agreement No. W81xwh‐15‐9‐0001, With The U.s. Army Medical Research Acquisition Activity (usamraa). Mtec Is Currently Recruiting A Broad And Diverse Membership That Includes Representatives From Large Businesses, Small Businesses, “nontraditional” Defense Contractors, Academic Research Institutions And Not‐for‐profit Organizations. points Of Contact: for Inquiries, Please Direct Your Correspondence To The Following Contacts: technical And Membership Questions Should Be Directed To The Mtec Biomedical Research Associate, Dr. Chuck Hutti, Ph.d., Chuck.hutti@ati.org all Other Questions Should Be Directed To The Mtec Program Manager, Mr. Evan Kellinger, Mtec‐sc@ati.org

Details: The Following Is A Sources Sought Notice. This Sources Sought Is Seeking To Identify Qualified Sources Under North American Industry Classification System (naics) 541330, Engineering Services(a-e) Services. This Sources Sought Announcement Is For Market Research Information Only And Is To Be Used For Preliminary Planning Purposes. No Sf330s Are Being Requested And None Will Be Accepted In Response To This Notice. This Is Not A Solicitation For Proposals, And No Contract Will Be Awarded From This Notice. This Sources Sought Announcement Will Not Restrict The Government As To The Ultimate Acquisition Approach. The Government Will Not Reimburse Respondents For Any Cost Incurred In Preparation Of A Response To This Notice. these Services Will Be Procured In Accordance With 40 U.s.c. Chap 11, Selection Of Architects And Engineers (formerly Known As The Brooks Architect Engineer Act) As Implemented In Far Subpart 36.6 And Dfars Subpart 236.6. the U.s. Army Corps Of Engineers (usace) Kansas City District (nwk) Seeks Qualified Ae Firms Interested And Capable Of Providing An Array Of Design Services For The Department Of Veteran's Affairs (dva) John Cochran Medical Center (jcmc) Located At 915 N Grand Blvd, St. Louis, Mo 63106. The Government Is Contemplating An Unrestricted (ur), A-e, Single Award Task Order Contract (satoc), Indefinite Delivery Contract Solicitation. The Estimated Ordering Limitation Of All Task Orders Issued Under The Satoc Will Have A Maximum Ordering Capacity Of One Hundred Million ($100,000,000.00) Dollars. The Base Ordering Period For This Contract Will Be Five (5) Years With One Option To Extend The Ordering Period For An Additional Five (5) Years. It Is Anticipated That A Solicitation Announcement Will Be Published In The Procurement Integrated Enterprise Environment In The 2nd Quarter Of Fy2026. firms Must Be Capable Of Performing Work To Support The Planning, Design, And Construction Phase Services For The Construction Of A New Health Care Facility And Supporting Facilities. Firms Must Be Capable Of Progressing The Current Conceptual Schematic Design Using The Collaborative Integrated Design And Construction (idac) Project Delivery Method. Idac Is A Usace Alternative Early Contractor Involvement (eci) Delivery Method That Requires Extensive Collaboration Between The Owner, Designer Of Record (dor), And Construction Manager / General Contractor. The A-e Collaboration Requirements Include Continuous Open Team Communication; Partnering; Willingness For The A-e To Incorporate Alternative Designs And Materials And Include Changes To Schedule; Phasing Plans; Specifications; Means And Methods Of Construction Throughout The Collaborative Design Progression Period That Takes Place During The Construction Contractor’s Preconstruction Phase Services. A Summary Of The Idac Delivery Method Is Attached To This Announcement. required Services May Include The Preparation Of Special Reports; Planning And Design Charrettes; Studies; Development Of Design Criteria For Performance Contracts; Design Of Construction; Documenting Basis Of Design; Developing, Updating, And Reconciling Construction Cost Estimates. The Task Orders May Include But Are Not Limited To Design Work Involving Site Investigation, Geotechnical Reports, Topographic Surveys, Preparation Of Contract Drawings, Technical Specifications, Design Analyses, Life Cycle Cost Analyses, And Continuous Real-time Computer Aided Cost Estimating And Cost Reconciliation With Third Party Estimates. Electronic Security System Design, Anti-terrorism/force Protection Design, Progressive Collapse, Seismic Design, Cyber Security, And Network Engineering May Be Required. Resiliency, Reliability, And Sustainability Will Be Important Considerations. total Building Commissioning, With A Perspective As Designer May Be Required. Construction Phase Services, Including Shop Drawing Review, Design During Construction, Site Visits, Etc., Could Be Included In Task Orders. Building Information Modeling (bim) Technologies, Cadd And Gis Deliverables May Be Required. Specific Requirements Will Be Determined Based Upon Project Requirements And Described In Each Task Order. Project Assignments Will Typically Require Performance In An Office Setting And On-site. the Kansas City District Is Soliciting Feedback From Industry As Part Of Our Market Research Efforts Associated With This Acquisition And Is Considering Various Acquisition Strategies To Deliver This Project And Requests Input From Industry. The Following Information Is Requested In This Sources Sought (ss) Announcement With A Limit Of Ten (10) Pages For Your Response: 1. Organization Name, Address, Email Address, Website Address, Telephone Number, Business Size (small Or Large), And Type Of Ownership For The Organization; Include Uei Number And Cage Code. 2. Firm's Interest In Providing An Sf330 On The Pending Solicitation Once Issued. 3. Experience: A. Evidence Of Capabilities To Perform Work Comparable To That Required For This Project (e.g. Design Of Medical Facilities And Ancillary Structures Providing A Wide Variety Of Patient Care Services, Design Of A Campus Requiring Phased Demolition And Phased Construction, Design Of Facilities Utilizing The Dva's Technical Information Library). B. Provide Three Recent Relevant/comparable Projects (not More Than Ten Years Old). Include The Project Name; Dollar Value Of The Project; Description Of The Key/salient Features Of The Project And Those That Demonstrate Similarity To The Work Required Under The Proposed Satoc; Identify The Contracting Office & The Customer/user (include Poc Information); And Identify/discuss The Acquisition Method (e.g., Sealed Bid, Best Value), Contract Type (e.g., Firm Fixed Price, Fixed Price Incentive Successive Targets [fpis], And Delivery Method (e.g., Integrated Design And Construction [idac],guaranteed Maximum Price [gmp], Design-bid-build, Design-build, Early Contractor Involvement [eci], Construction Manager As Constructor [cmc], Etc.). Responses Should Address The Firm's Capability To Construct A Hospital Or Medical Center Facility And The Challenges Associated With Large, Complex Medical Facilities. 4. Identify If, Based Upon The Scope Of This Project, You Would Form A Joint Venture To Execute This Work. Provide Joint Venture Information, If Applicable, Including Uei And Cage Code. 5. Provide The Firms Plan To Include Small Business Participation To The Maximum Extent Practicable. a Virtual Industry Day Is Planned For Thursday, December 19, 2024 At 1100 Cst. Webex Login Information Is Listed Below: 1. Join From The Meeting Link Below: https://usace1.webex.com/usace1/j.php?mtid=m5e4d4e7380c3b0f3d4796025d738aa1d 2. Join By Meeting Number Below: meeting Number (access Code): 2827 328 3747 meeting Password: N4ppp75cyc* 3. Join From A Mobile Device (attendees Only) +1-844-800-2712,,28273283747## Us Toll Free +1-669-234-1177,,28273283747## Us Toll 4. Join By Phone +1-669-234-1177 Us Toll +1-844-800-2712 Us Toll Free global Call-in Numbers | Toll-free Calling Restrictions 5. Join From A Video System Or Application dial 28273283747@usace1.webex.com you Can Also Dial 207.182.190.20 And Enter Your Meeting Number. please Send Your Sources Sought Responses Via Email To Ines.necker@usace.army.mil. Submissions Should Be Received By 11 A.m. Cst, January 6, 2025. this Synopsis Is For Market Research Purposes Only And Is Not A Request For An Sf330 Nor Does It Restrict The Government As To The Ultimate Acquisition Approach. The Government Will Not Reimburse Respondents For Any Costs Incurred In Preparation Of A Response To This Notice.

Details: Advanced Procurement Notice Future Fighter Capabilities Project (ffcp) Cfb Cold Lake, Ab (with Security Requirements) Purpose Of This Advanced Procurement Notice This Is Not A Bid Solicitation. This Is An Advanced Procurement Notice (apn) Of Potential Contracts With Anticipated Security Requirements To Provide Interested Contractors, Suppliers, And Vendors An Opportunity To Begin The Sponsorship Request Process For Potentially Obtaining The Required Security Clearance(s) That Are Anticipated. Note That There Is No Guarantee That These Contracts Will Proceed Or That Any Security Clearance(s) Will Be Granted Under The Sponsorship Process In A Timely Fashion Or Otherwise. Description Of The Project Ellisdon Construction Services Inc. (ellisdon) As The Design Builder, Along With Its Design Partner, Stantec Have Been Contracted To Provide Design Services And Constructability Oversight To Complete The Design Of The Royal Canadian Air Force (rcaf) Infrastructure That Will Support The Future Fighter Capability Project (ffcp). The Infrastructure Will Provide Shelter And A Working Environment Capable Of Supporting The Operation And Maintenance Of A Yet To Be Determined Advanced Fighter Aircraft. Design Has Progressed Significantly With Various Tender Packages Forthcoming Tentatively To Start In Q3 2024, With Project Construction Being Conditional On The Project Receiving Approval To Proceed From Dnd. details On Upcoming Projected Tender Packages To Follow Via Amendment. Prior To This, Ellisdon Is Seeking Interested Parties Consisting Of Trade Contractors, Vendors, And Suppliers To Ensure That They Have All Necessary Security Clearances In Place Prior To This As This Is A Requirement For This Project.    Description Of The Scope Of Works Project Construction Is Conditional On The Project Receiving Approval To Proceed From Dnd. Project Scope And Summary Are Noted Below. Contract Number:  71947 Title:  Modified Design Build Services For Fighter Squadron Facility Building Size: Approximately 555,000 Sf Anticipated Posting Date: q3 2024 Description: construction Of A New A Fighter Squadron Facility Consisting Of Two Fully Operational tactical Fighter Squadrons (tfs) And The Operational Training Unit (otu),  including But Not Limited to: Offices, Administrative Spaces, Mission Planning Rooms, Briefing / De-briefing Rooms, Meeting rooms, Classrooms, Auditorium, Speciality Training Rooms Including Simulators (sims) accommodations And Part-task Trainers Accommodations, Hangars, Maintenance Bay Facilities, specialty Aircraft Maintenance Labs, Shops And Storage, It Offices And Server Rooms, Building support Spaces, And Common Spaces. This Work Package Will Also Include The Construction Of Nearby Airfield Pavements, Apron And Taxiway Access Lane Edge Lighting, And Apron Flood Lighting consisting Of Concrete And Asphalt. Construction Of Infrastructure Will Encompass The Following Scopes Of Work. Scope Of Work, Using Masterformat Divisional Breakdown As A Reference, May Include, But Are Not Limited To: Masterformat Division             Scope Of Work 01 45 00                                 Surveying 01 45 00                                 Material Testing 01 45 00                                  Third Party Inspection (roof, Structural, Geotechnical) 01 52 00                                  Temporary Facilities (trailers, Toilets, Fencing, Waste Bins) 01 54 19                                  Tower Cranes 01 54 23                                  Scaffolding 02 41 19                                  Selective Demolition 03 11 00                                  Concrete Formwork 03 15 00                                  Concrete Accessories 03 20 00                                  Reinforcing Steel 03 30 00                                  Concrete Supply 03 35 00                                  Concrete Placing & Finishing 03 45 00                                  Precast Specialties 04 00 00                                  Masonry 05 10 00                                  Structural Steel 05 30 00                                  Metal Decking 05 50 00                                  Miscellaneous Steel 05 70 00                                  Ornamental (specialized) Metals 06 20 00                                  Millwork / Architectural Woodwork 07 10 00                                  Damp Proofing & Waterproofing 07 40 00                                  Metal Roofing, Cladding & Siding 07 50 00                                  Membrane Roofing 07 80 00                                  Firestopping & Fireproofing 07 90 00                                  Caulking 08 10 00                                  Openings – Doors, Frames & Hardware 08 33 00                                  Coiling Doors & Grilles 08 34 16                                  Hanger Doors 08 35 00                                  Folding Doors & Grilles 08 36 00                                  Overhead Doors 08 40 00                                  Aluminum Entrances, Storefronts & Curtain Wall 08 80 00                                  Glazing 08 87 00                                  Window Film 09 21 16                                  Gypsum Board Assemblies 09 51 14                                  Acoustic Panels 09 60 00                                  Flooring 09 66 00                                  Tiling 09 67 00                                  Fluid Applied Flooring 09 69 00                                  Access Flooring 09 90 00                                  Painting 10 11 00                                  Visual Display Boards 10 14 00                                  Signage 10 22 19                                  Demountable Partitions 10 26 00                                  Wall, Corner, Door Protection 10 28 00                                  Bathroom Accessories & Toilet Partitions 10 51 00                                  Lockers 10 75 00                                  Flagpoles 11 30 00                                  Appliances 11 61 00                                  Theater And Stage Equipment 11 66 00                                  Athletic Equipment 11 81 29                                  Fall Arrest Systems 11 98 00                                  Detention Equipment 12 00 00                                  Furnishings 12 20 00                                  Window Coverings 14 20 00                                  Elevator & Lifts 21 00 00                                  Fire Suppression 22 00 00                                  Mechanical – Plumbing 23 00 00                                  Mechanical – Heating, Ventilation And Air Conditioning (hvac) 25 00 00                                  Integrated Automation 26 00 00                                  Electrical 28 10 00                                  Access Control            31 00 00                                  Earthworks 31 60 00                                  Piling 32 10 00                                  Paving 32 16 00                                  Sidewalk Curb & Gutter 32 31 00                                  Fencing 32 90 00                                  Landscaping 33 00 00                                  Utilities & Underground 34 73 00                                  Airfield Construction - Apron 41 22 00                                  Overhead Cranes 48 16 00                                  Geothermal Energy Project Prequalification And Anticipated Security Requirements In Order To Be Eligible To Participate In The Upcoming Project Prequalification Process, The Interested Party Will Be Required To, Among Other Things, Actively Hold All Required Security Clearance(s) At The Time Of Closing. this Will Also Be Noted in All Upcoming Solicitation Tender Documents. As Of The Date Of Posting Of This Advance Procurement Notice, The Required Security Clearance(s) Are Anticipated To Be: * for Areas Established As Security And High Security Zones - A Valid And Active Facility Security Clearance (fsc) At The Level Of Secret Granted Or Approved By The Contract Security Program (csp), Public Works And Government Services Canada (pwgsc)   * For Areas Established As Public, Reception And Operations Zones - A Valid And Active Designated Organization Screening (dos) At The Level Of Reliability Granted Or Approved By The Contract Security Program (csp), Public Works And Government Services Canada (pwgsc) Industrial Security Program (isp) Sponsorship Defence Construction Canada (dcc) Is Providing Interested Parties Early Access To The Security Clearance Application Process Through Sponsorship Under Its Industrial Security Program (isp). Accordingly, Interested Parties That Are Interested In Submitting Or Participating In A Proposal/bid For These Procurements That Fall Under This Program And That Do Not Actively Hold The Above Identified Security Clearance(s) Should Begin The Security Clearance Application Process By Applying Through Dcc’s Isp. To Begin The Security Clearance Sponsorship Process, Please Submit A Sponsorship Request Application To Dcc By Following The Steps Identified On Dcc’s Website At: Https://www.dcc-cdc.gc.ca/industry/security-requirements In Their Sponsorship Request Application To Dcc, Interested Parties Are Asked To Quote The Following Information, Among Other Things: * Contract Number As Referenced Above; And * Level Of Clearance Requested To Be Sponsored For. Sponsorship Process Timeline Sponsorship Timeline Is Currently As Follows: * Thirty (30) Calendar Days Prior To Planned Tender Closing, For Designated Organization Screening (dos); And * Sixty (60) Calendar Days Prior To Planned Solicitation/tender Closing, For Facility Security Clearance (fsc) At The Level Of Secret. Questions Any Questions Pertaining To The Isp Sponsorship Process Outlined In This Advanced Procurement Notice Can Be Addressed To: Telephone: (613) 998-8974 Email Address: Isp.sponsorship@dcc-cdc.gc.ca Any Questions, Exclusive Of Security Sponsorship, Relating To This Advanced Procurement Notice Can Be Addressed To: Scott Barabash, Cet, Gsc, Cec Senior Estimator Ellisdon Construction Services Inc. 780-444-3042 Sbarabash@ellisdon.com Disclaimer Dcc Nor Ellisdon Do Not Provide Any Assurances Or Guarantees That A Sponsorship Request Package Or A Security Clearance Application Forwarded To The Contract Security Program (csp), Public Works And Government Services Canada (pwgsc) On Behalf Of A Interested Party Will Be Successful Or Result In The Granting Of The Requested Security Clearance(s) By The Csp, Pwgsc, In A Timely Fashion. At All Times, The Processing Of A Sponsorship Request Package Or A Securiy Clearance Application Is Subject To The Respective Terms, Conditions, And Timelines Of Dcc's Isp Sponsorship Process And The Csp, Pwgsc's Security Clearance Granting Process. By Applying To Either Of The Aforementioned Processess, The Interested Party Accepts And Agrees To Bear Any Risks Associated With: (i) The Completeness Or Accuracy, Or Lack Thereof, Of Its Application Or Related Documents Submitted Under Or In Connection With Either Said Processes, And (ii) The Timeliness, Or Lack Thereof, Of Any Processing Or Granting Of Security Clearance(s) Under Or In Connection With Either Said Processes.

Details: Description Item No. Specification Statement Of Compliance “comply” Or “not Comply” 1 Supply, Delivery, Installation, Testing And Commissioning Of Supervisory Control And Data Acquisition (scada) System For Koronadal Public Market Water Supply System A. General 1. Scope A. The Scope Of Work Shall Be To Supply, Install, Test And Commission The Supervisory Control And Data Acquisition (scada) System For Koronadal Public Market. All The Required Parameters Shall Be Transmitted To City Of Koronadal Water District Main Office As The Central Command Center. B. The Scada System, In General, Performs The Following Tasks But Not Limited For Specified Parameters: I. Monitoring Functions Ii. Controlling Functions Iii. Graphical Displaying Functions Iv. Reporting Functions V. Alarming Functions Vi. Trending Functions Vii. Data Storage Viii. Other Related Functions That May Be Required By The Ckwd Not Stated Herein. 2. Conditions A. The System And Instruments Should Be Brand-new Specifically The Programmable Automation Controllers, Sensors, Variable Frequency Drives (vfd), Pumps, Motors, Electromagnetic Flowmeters, And Scada Software. B. The Supplier Shall Furnish All Labor, Materials, Tools, Equipment, Transport, Supplies And Other Services To Complete The Scada System And Shall Be Responsible For The Proper Installation Of The Supplied Equipment And Software. C. The Supplier Shall Install The Equipment And System Within One Hundred Twenty Days (120) Days After Signing Of Notice To Proceed (ntp). The 15-day Time Frame Shall Be Allotted In Order To Check The Proper Alignment Of The Pump/ Motor Assembly And Make Necessary Corrections Of Both Mechanical And Electrical Failures Found During Installation And Construction. The Supplier Shall Inform The Ckwd Measures And Proper Procedures On Its Operation To Guarantee A Smooth And Proper Function Of The Newly Installed Units And System. D. Field-testing Shall Be Made Once The Mounted Equipment Is Ready For Operation And When Both The Ckwd And Supplier Have Finished Their Scopes Of Work On The Installed Unit. During The Installation And Commissioning Of The Scada System, The Supplier Is Required To Assign A Technician Responsible For Overseeing The Commissioning Process. All Associated Costs, Including Transportation, Accommodation, Allowances, And Other Incidental Expenses, Shall Be Covered By The Supplier. E. The Supplier Shall Be Liable For Any Damages To Materials, Electro-mechanical Equipment’s Such As But Not Limited To Pumps And Motors, Variable Frequency Drive (vfd), Flowmeter, Level And Other Electro-mechanical Devices During Testing And Commissioning Of The Scada Project And Shall Be Required To Replace Immediately To Any Incur Defects Without Cost To Ckwd. All Incidental Expenses Including The Pulling Out And Transporting Of The Unit Shall Be Borne By The Supplier. F. In Accordance With The Electricity Safety Regulations, Supplier Is Strictly Prohibited From Connecting, Or Allowing To Remain Connected, Any Wiring Or Equipment In Unsafe Conditions To An Electrical Installation Or Power Supply. Additionally, To Control Hazardous Energy Sources, Standard Regulations Require That Machinery And Equipment Be Isolated From Their Energy Sources And Secured With A Lockout Or Tagout System Before Any Servicing Or Maintenance Is Performed. G. The Supplier Shall Provide A Comprehensive Warranty Covering All Parts And Labor For A Minimum Period Of One Year From The Date Of Delivery And Installation Of The Equipment And System. H. In Case Of Any Malfunction, Defect, Or Failure Of The Equipment And System During The Warranty Period, The Supplier Shall Offer Repair Services At No Additional Cost To The Buyer. I. The Supplier Must Respond To A Warranty Repair Request Within 24 Hours Of Notification By The Buyer. The Supplier Is Required To Complete The Repair Or Provide A Replacement Within A Maximum Lead Time Of 1 Week From The Time Of Notification. This Includes The Time For Diagnostics, Shipping Of Parts, And On-site Or Off-site Repair As Necessary. J. If The Repair Cannot Be Completed Within The 1-week Lead Time, The Supplier Must Provide A Temporary Replacement Of Equivalent Specifications At No Extra Cost To The Buyer, Until The Original Equipment Is Repaired And Returned To Full Working Condition. K. The Supplier Is Required To Maintain High Standards Of Housekeeping Throughout The Entire Project Duration. They Shall Be Fully Responsible For Managing And Securing Their Own Materials, Equipment, And Tools To Prevent Any Potential Accidents Or Safety Hazards In The Workplace. L. All Equipment/ Materials Must Be Brand New. 3. Location The Assembly Shall Be Installed At Koronadal Public Market, Purok Kaunlaran, Brgy. Zone I, City Of Koronadal. 4. List Of Major Components Item No. Item Quantity 4.a Programmable Logic Controller 1 4.b Human Machine Interface (hmi) 1 4.c Scada Software 1 4.d Workstation Pc 1 4.e Ethernet Switch 2 4.f Un-interruptible Power Supply 1 4.g Monitor 55" 1 4.h Wireless Antena (tx/rx) With Pole 2 4.i Variable Frequency Drive 2 4.j Pumps & Motors 2 4.k Water Level Monitoring Transmitter 4 4.l Electromagnetic Flowmeter 1 4.m Power Meter 1 4.n Fabricated Coated Panels W/ Complete Assembly 1 4.o Surge Protection Device 1 4.p Butterfly Valve With Actuators 2 4.q Pressure Transmitter 2 5. Major Components Specifications It Shall Meet The Following Operating Requirements: Description Specifications 5.a Programmable Logic Controller Digital Input 28 24 Vdc/vac Inputs, Up To 6 High Speed Counter Channels Relay Output 20 Relay Output Power Supply 24 Vdc Communication Embedded Usb Programming Port, Ethernet Port, Non-isolated Rs232/485 Serial Port Plug-in Ports 5 Plug-in Ports, Up To 4 Expansion Modules 5.b Human Machine Interface (hmi) Display 10.4 In. Display, Aluminum Panel With Resistive Touch Resolution 800x600 Or Higher Case Zinc-coated Skin Pass Steel Power Supply 24vdc (9 - 32vdc) Isolated Interface Ethernet: 2x Gigabit Ethernet (rj45), Usb: 2x Usb 3.0 (type-a / Host) Serial: 1x Rs232/422/485 (db9m) Isolated Operating Temperature 0° - 50°c Approvals Ce, Culus Listed, Ukca, Atex, Kc, Rcm 5.c Scada Software Scada Should Support Unlimited Displays, Unlimited Web Clients And Tags To Accommodate Future Integration With Our Pumping Stations. For Future Expansion, Scada System Shall Have Dual Monitor Capability To Provide Enhanced Visibility And Operational Efficiency. Data Logging To Odbc-compliant Database Such As Microsoft Sql Server Or Historian. 5.d Workstation Pc Cpu At Least 12th Gen Or Higher Intel Core I5 Storage (os) 256gb M.2 Gen 4 Nvme Ssd Storage (data) 2x1 Tb 7200 Rpm Hdd Or Higher Raid 0, 1, 5 Support Operating System Windows 10 Pro Or 11 Pro Memory 8gb Non-ecc Ddr5 Or Higher Display Output 2 X Displayport 1.4a Hbr2 Ports Ethernet Port Rj45 (1 Gbe) Ethernet Port Chassis/form Factor Tower 5.e Ethernet Switch Type Managed Switch Rj45 Ports Minimum 5x10/100baset Operating Temp -20 ~60 Deg. C Vlans Supported Secure Connectivity With Ssh And Https Supported 5.f Un-interruptible Power Supply Supplied Scada Product Must Have The Capacity/facility To Contain Battery-backed Memory For The Duration Of At Least One (1) Day Dedicated For The Plc's Programming And Configuration. System Must Be Able To Send Alerts For Power Outages. An Industrial Type Uninterruptible Power Supply (ups) Must Be Present For Plc Back-up For At Least Fifteen (15) Minutes. It Must Also Support Local And Remote Firmware Upgrade. 5.g Monitor Size: At Least 55" Mounting: Wall Mounted, Inclusive Of Installation 5.h Wireless Antenna (tx/rx) With Pole (communication Complete Set) Power Supply 24v, 0.3a Gigabit Poe Adapter Max. Power Consumption 7w Power Method Passive Poe Gain 23 Dbi Networking Interface (1) 10/100/1000 Ethernet Port Wind Survivability 200 Km/h Security Wpa2 Long-range Point-to-point (ptp) Link Mode 5.i Variable Frequency Drive Motor Power, Hp [kw] 1 Step Higher For 10hp Motor Ac Voltage Range 380v – 500v Voltage % Tolerance +10%, -15% Supply Number Of Phase 3 Phase Total Harmonic Current Distortion (thdi) 30 – 45% Prospective Short Circuit Current (kaic Rating) 65ka Nominal Current 52a Enclosure Rating Ip55 Local Control Panel W/mobile Phone Bluetooth Connectivity And Clear Display Vfd Features Motor Pre-heating Function Built-in Pid Control Built-in Safe Torque Off (sto) Function Full-text Diagnostic Display Dtc Control For Precise Torque Control And Enhance Energy Efficiency Removable Memory Unit For Faster Drive Replacement Digital Variable Frequency Drive That Is Scada Ready And Has Integrated Emc Filter. Complete Protection Against Over/under Voltage, Thermal Overcurrent, Lock Rotor, Ground Fault, Under Current, Definite Time Overcurrent. Digital Monitoring Of Voltage, Current, Frequency, Energy, Kw, And Fault History The Vfd Will Be Controlled Via Fieldbus. Status Updates, Diagnostic Faults, And Alarms Will Be Visible On Both The Hmi And Scada System. 5.j Pumps & Motors Number Of Pump And Motor 2 Units Pump Type Vertical In-line Maximum System Pressure 120 Psi Actual Calculated Flow 3.5 Liters Per Second Maximum Flow 5.0 Liters Per Second Mains Supply 230v Resulting Head Of Pump 35 Meters Head (maximum) 50 Meters Manifold Sizes (inlet And Outlet) 100 Mm Pump Parts In Contact With The Pump Liquid Made Of Stainless Steel Pump Bases And Heads Made Of Cast Iron; Other Vital Parts Are Made Of Stainless Steel Motor Rating 5 Hp, 230v, 3 Phase, 60 Hz 5.k Water Level Monitoring Transmitter Principle Radar Sensor Range Up To 8 Meters Output 4-20ma Beam Angle 8° Operating Voltage 12 - 35 V Dc Protection Rating Ip66 Or Higher Maintenance-free Operation Due To Non-contact 80 Ghz Radar Technology 5.l Electromagnetic Flowmeter Sensor Size Mm (in): 150 (6) Environment Protection Rating: Ip67/nema 6 Accuracy: ±0.2% Qmax (m3/hr): 700 Or Higher Qnominal (m3/hr): 600 Or Higher Qtransitional (m3/hr): 5 Qmin (m3/hr): 3.5 Or Lower Cable: 20 Meters (capable Upto 100m Or Higher) Flange Type Connection: Pn16 Lining Material: Elastomer Flange Material: Carbon Steel Housing Material: Carbon Steel Measurements: Direct/inverse Flow Transmitter Transmitter Mounting: Remote Power Supply: 85 To 265 V Ac Current Output: 4 To 20 Ma Security: Read-only Switch And Ultra-secure Service Password Digital Outputs: Three (3) Configurable Pulse/frequency And Alarm Outputs Fit-and-flow Data Storage Inside The Flow Meter Which Eliminates The Need To Match Sensor When Replace Self-calibrating Capabilities 5.m Power Meter Data Port Ethernet Interface Modbus Tcp Or Its Equivalent Supply Voltage 95-240v Ac; 110-340v Dc Digital Input 1 Or Higher Digital Output 1 Or Higher Degree Of Protection Ip65 Or Higher 5.n Fabricated Coated Panels W/ Complete Assembly Shall Provide Newly Fabricated Powder Coated Panels With A Complete Set Of Wiring Consumables For Network And Monitoring Of All Required Parameters. - Programmable Logic Controller - Human Machine Interface (hmi) - Io Modules - Circuit Breaker Protection - Power Meter - Surge Protection Device - Uninterruptible Power Supply - Exhaust Fan Shall Be Installed Inside The Control House And Shall Be Properly Ventilated 5.o Surge Protection Device Protection Performance Maximum Of 30 Microsecond Radius Of Protection 72 Meters Minimum 5.p Butterfly Valve With Actuators Size In (mm) 6” (150) Butterfly Valve Body Material Cast Iron Butterfly Disc Stainless Steel 304 Or 316 5.q Pressure Transmitter Measuring Range 0 To 16 Bar G (0 To 232 Psi G) Or 0 To 25 Bar G (0 To 363 Psi G) Current Output Signal 4-20 Ma Degree Of Protection Ip65 Or Higher 6. List Of Human Machine Interface (hmi) Alarms Item No. Alarm Descriptions 6.a Under Voltage 6.b Over Voltage 6.c Over Current 6.d Water Level Reservoir (cistern) Low Level 6.e Water Level Reservoir (cistern) High Level 6.f Water Level Right Building Low Level 6.g Water Level Right Building High Level 6.h Water Level Left Building Low Level 6.i Water Level Left Building High Level 6.j Discharge Line High Pressure 6.k Discharge Line Low Pressure 6.l Low/high Flowrate 6.m Submersible Motor Tripped 6.n Motor Control Panel High Temperature 6.o Motorized Valve (on/off Status) 6.p Vfd Alarms 7. System Architecture 8. Personnel Requirements The Contractor Shall Provide The Minimum Number Of Personnel For The Project, As Detailed In The Table Below. These Roles And Responsibilities Ensure Thorough Coverage Of All Project Aspects. Quantity Description 1 Project Engineer (pee) 2 Technical Engineers (electronics And Communications Engineer) 2 Technical Engineers (registered Electrical Engineer) To Ensure Qualified Personnel, All Professionals Must Have A Valid Unexpired Prc License. 9. Schedule Of Payment The Contract Duration Is One Hundred Twenty (120 Cd) Calendar Days Starting Upon Receipt Of Notice To Proceed. All Reports And Related Documents Must Be Submitted To The City Of Koronadal Water District Project Engineer And Should Be Officially Acknowledge Monthly. The Following Are The Schedule Of Payments: Payment Description Percentage Of Contract Price Remarks First Payment Upon Completion Of Item Orders 10% Must Submit Certification That All Components Are Ordered, Attached Proof Of Order From Suppliers Second Payment Upon Delivery Of All Items At Ckwd Facility 30% Must Compile And Submit All The Delivery Receipt Acknowledge By Ckwd Personnel Third Payment Upon Reaching 40% Of Project Accomplishment 30% Must Submit Certification That The Project Reached 40% Of Its Completion And Approved By The Ckwd Project Engineer Final Payment Upon Project Completion And Acceptance 30% With 5% Retention Upon Completion Total 100% B. Additional Requirements (compliance Upon Submission Of Bid) 1. Must Submit Original Catalog / Brochure For Vfd, Pump And Motor, Flowmeter, And Valve (please Specify Offered Product). 2. The Manufacturer Should Have Iso 9001:2015 Certificate Or Any Proof Of Renewal If Expired. 3. Minimum Manufacturer's Warranty Of One (1) Year. 4. Certification On Compliance To The Following: A. Reports: Indicate All The Fault Alarms From Vfd, Pressure, Flow, Level, And Other Protective Devices To Command Center. B. Trends And Data Logging: That Ckwd Will Provide The List Of Variables To Be Included In The Trend And Shall Be Logged Continuously In The Hard Drive For Historical Trending With Reference To The Monitoring Requirements. C. After Sales Service: After The Final Acceptance, The Contractor Shall Conduct A Monthly Site Visit Within The Warranty Period. The Contractor Shall Have 24/7 Availability Of Technical Engineers Within Mindanao Island. Must Submit Notarized Statement Of Undertaking Stipulating Availability Of Skilled Personnel Within Mindanao. D. Site Visit: The Bidder Shall Conduct A Site Visit/survey On Or Before The Pre-bid Conference Schedule To Ensure That They Know The Status/set Up Of The Project Site. Must Submit Certification Signed By Ckwd Project Engineer In-charge. E. Warranty: All Components Shall Be Guaranteed Against Defects In Workmanship And Materials For A Period Of One (1) Year From The Date Of Project Completion. Defective Components Or Parts Discovered Within The Warranty Period Shall Be Replaced Without Charge Or Additional Cost To Ckwd. 5. Bidders Qualifications: A. Must Submit Certification Or Any Document That The Bidder Has A Regional Presence Or A Regional Service/support Partner/center Within Mindanao. B. Bidder Must Be An Authorized Distributor From Manufacturer. Must Submit Certificate Of Distributorship. C. Bidder Must Have A Pcab License. D. Bidder Must Have An Experience Of Having Completed At Least Three (3) Contracts That Is Similar To The Contract To Be Bid. (indicate In The Form Of Statement Of All On-going Government & Private Contracts Including Contract Awarded But Not Yet Started.) E. Bidder Must Have Been In The Business For At Least Five (5) Years Of Providing Scada System Solution And Services In Government Or Private Sectors. Must Submit Dti Or Sec Registration. C. Additional Requirements (compliance Upon Delivery) 1. The Supplier’s Technical Representative Shall Be Present During Installation And Commissioning For Final Testing. 2. Must Submit Comprehensive Documentation, Including But Not Limited To Operation Manuals, Datasheets, And Manufacturers’ Certificates For All Electrical And Mechanical Components. 3. Trainings/transfer Of Technology: The Winning Bidder Shall Provide Inhouse Training On The Following Working Subject Matters: A. Plc And Scada Software Programming B. Installation C. Configuration D. Calibration E. Troubleshooting/operations And Maintenance All Associated Costs, Including Transportation, Accommodation, Allowances, And Other Incidental Expenses, Shall Be Covered By The Supplier.

Details: Full Title: Professional Consulting Services For Environmental Site Assessment (esa), Decommissioning And Alternative Land Use Plan For Former Sludge Drying Beds D7. Scope Of Services D7.1 The Major Components Of The Work Identified In This Section Shall Form The Minimum Requirements And Anticipated High Level Sequence Of Work. The Proponent Is Encouraged To Review The Major Work Components And Provide Additional Information On How The Work Components Could Be Altered, Updated, Or Sequenced Appropriately As Part Of Their Proposal Submission. D7.2 Review All Applicable Information, Data, Surveys, Reports And Existing Drawings Related To The Project Including, But Not Limited To The Information Contained In This Rfp. D7.3 The Services Required Under This Contract Shall Consist The Following: (a)phase I: Complete An Environmental Site Assessment (esa)/existing Infrastructureassessment (referred To Below As ‘phase I Report’) Of The Sludge Drying Beds Site: (i)the Entirety Of This Phase Will Be Paid Out As A Fixed Price Item In Accordance Withsection B9. (ii) The Proponent Will Request And Review All Pertinent Background Reports, Operating Data, And Any Other Data The Consultant Feels Pertinent In The Background Evaluation. (iii) The Proponent Will Submit Any Specific Questions On The Sludge Drying Beds History/use To The City Project Manger To Forward On To Appropriate Staff During This Phase. (iv) The Majority Of The Work Within This Phase Is Tied To The Submission Of Phase I Report, Which Will Include The Following At Minimum: (i) The Esa Aspects Of This Report Can Be Aligned With The Requirements Of Csa-z768-01 (r2022) For Completion Of A Phase I Environmental Site Assessment, But Does Not Necessarily Need To Comply With All Requirements.  The Intention To Align With Csa-z768-01 (r2022) Is To Provide A Template For The Format For The Report Deliverables. (ii) The Esa Aspects Of This Phase May Also Be Aligned With The Requirements Of Manitoba Environment & Climate’s Guideline For Environmental Site Assessments In Manitoba. (iii) The Following Items Identified Within Csa-z768-01 (r2022) Are Specifically Clarified Related To This Work:  Interviews Can Occur Via Email Inquiries, Submitted To The City Project Manager As Stated In D7.1(a)(iii) Above. They Are Not Required To Be In-person Interviews.  Interviews With Staff Can Occur To Confirm The Status Of Specific Infrastructure Believed To Be Decommissioning Or Still In Operation. Interviews With Staff Can Also Gather Necessary Background On The Current Operational Issues/concerns In The Use Of Existing Infrastructure.  The Proponent Should Consider The Site Visit Requirements For The Purposes Of Reviewing The Entire Site Visually And Taking A Suitable Number Of Photographs To Demonstrate The Current Condition Of The Lands. This Will Be As Part Of Completing The Site Visit Component Of The Phase I Report.  As Part Of The Records Review Component Of The Study, Detailed Review Of Existing Municipal Servicing Drawings Should Be Completed. This Exercise Should Result In A Detailed Infrastructure Inventory Of All Existing Infrastructure Believed To Be Currently In Operation.  The Records Review Should Particularly Focus On Confirming The Extent Of Decommissioning Works Completed Through The 1990s As Part Of Decommissioning The Drying Cells, And Construction Of The Asphalt Drying Pad. (iv) The Following Requirements Will Augment The Typical Requirements Of A Phase I Esa In Accordance With Csa-z768-01 (r2022), In Order To Document The Existing Infrastructure:  Cursory Statements As To The Expected Condition Of The Existing Infrastructure Is Also Be Contained In The Report. Expected Condition Is To Be Assessed Based On The Records Review, Interviews With Staff, And Basic Information Gathered From The Site Visit.  All Infrastructure No Longer In Operation, But Unknown If Fully Decommissioned To Be Documented In This Report Within The Infrastructure Inventory.  All Infrastructure No Longer In Operation, But Known To Be Decommissioned Based On Past Project Work To Be Documented In This Report Within The Infrastructure Inventory.  All Infrastructure Supporting The Current Site Operation, Including The Decant Pump Station And The 5.5 Km Forcemain Extents (3.2km Length Prior To Tying Into The Local Wws System, And The Remaining 2.3km Segment Disconnected But Not Removed) Is To Be Included Within The Infrastructure Inventory Under Consideration. (b) Phase Ii: Complete Sampling/infrastructure Assessment Plan (i) The Entirety Of This Phase Will Be Paid Out As A Fixed Price Item In Accordance With Section B9. (ii) This Plan Is Expected To Be Drafted As A Brief Work Proposal Detailing The Extent Of Sampling And Sampling Finding Reporting, Along With Condition Assessments Or Other Site Inspections Believed To Be Beneficial Is To Be Submitted To The City Project Manager For Approval To Use The Additional Work Allowance To Fund. (iii) This Work Can Occur Concurrently With The Development Of The Phase I Report. It Is Assumed It Will Not Begin Until A Suitable Point Within The Phase I Report Development, However It Is Not Required For The Phase I Report To Be Finalized Before This Work Can Be Initiated. (i) It Should Not Be Initiated Until The Consultant Has A Fundamental Understanding The Site, Its Infrastructure Components, Land Use History, And Risks From The Desktop Assessments Associated With The Phase Report Submission. (ii) It Is Recommended The Proponent Notify The City Project Manager When They Intend To Begin Work In This Phase Within The Proposal, Should It Be Desired To Occur Concurrently With The Phase I Report Submission. (iv) The Sampling Plan Component Of This Proposal Can Be Drafted In Accordance With Csa-z769-00 (r2023) Acting As A Template. This Will Establish All Intrusive Investigations Proposed To Determine Soil And Ground Water Conditions With The Objective Of Determining The Extent Of Impacts, In Any, To Allow For The Preparation Of Remediation Options In Accordance With Phase Iv Of The Work. (v) The Extent Of Samples Completed, Along With The Overall Number Of Samples Proposed To Be Collected And Tested, Is To Be Based On The Specific Environmental Risks Identified In The Esa, Along With The Budget Available With The Additional Work Allowance. (vi) Sampling Shall Be Completed Against Appropriate Environmental Quality Guidelines Or Regulatory Requirements, As Applicable And In The Professional Judgement Of The Proponent. (i) For Example, Soil Samples Are To Be Compared Against The Ccme Soil Quality Guidelines For The Protection Of Environmental And Human Health. (ii) Specific Environmental Quality Guidelines/requirements Assumed To Be Applied Samples Collected Shall Be Documented Within The Sample Plan Of This Proposal. (vii) The Infrastructure Assessment Component Should Present A Sequence Of Tasks To Review/confirm The Condition Of Existing Infrastructure Identified In The Infrastructure Inventory. (viii) The Infrastructure Assessment Component Should Also Present Any Tasks Required To Confirm Existence Or Existing Infrastructure, Or Status Of Decommissioning Of Existing Infrastructure As Required. (ix) The Scope Of Condition Assessment Tasks Is To Be Determined By The Consultant Based On The Risks/condition Of Specific Infrastructure, The Extent Of Existing Infrastructure To Be Assessed, Along With The Budget Available Within The Additional Work Allowance. (x) The Sampling/infrastructure Assessment Plan Shall Include An Updated Safe Work Plan The Consultant Specific For The Site Sample And Infrastructure Assessment Work. (xi) The Estimated Costs For The Tasks Expected In The Sampling/condition Assessment Plan Is To Be Submitted Within The Plan, Utilizing Form P: Person Hours Utilizing Key Personnel Hourly Estimates, Along With Subconsultant Prices. (c) Phase Iii: Complete Soil Testing, Groundwater Monitoring, Or Laboratory Testing Of Samples Collected To Confirm Specific Sources Of Contamination, If Required. Site Investigations To Further Assess The Condition Of Existing Infrastructure On Site, Or To Assess The Status Infrastructure Believed To Be Decommissioned, Are Also To Be Completed In This Phase. (i) The Entirety Of This Phase Will Be Approved Utilizing Funds From The Additional Work Allowance. (ii) The Sampling/infrastructure Assessment Plan Is Expected To Be Complete Before This Phase Can Begin, As This Deliverable Will Form The Proposal For Approval To Utilize The Additional Work Allowance. Under Extenuating Circumstances Such As Seasonal Impacts On Site Investigation Activities, Portions Of This Phase May Be Initiated Or Completed Prior To The Completion Of The Sampling/infrastructure Plan. (iii) The Initiation Of This Work However Can Occur Concurrently With The Remaining Tasks Related To The Development Of The Phase I Report, Under The Condition Where The Sampling/infrastructure Assessment Plan Is Approved Prior To The Completion Of The Phase I Report. (iv) It Is Recommended The Proponent Notify The City Project Manager When They Intend To Begin This Phase Within The Proposal, Should It Be Desired To Occur Concurrently With The Phase I Report Submission. (v) The Conclusion Of This Phase Will Be The Submission Of A Technical Memorandum Which Will Include The Following At Minimum: (i) Summarize/update The Extent Of Site Sampling And Testing Completed, In Comparison To The Extent Of Work Identified In The Sampling/infrastructure Assessment Plan. (ii) Summarize/update The Extent Of Infrastructure Assessments Completed, In Comparison To The Extent Of Work Identified In The Sampling/infrastructure Assessment Plan. (iii) Identify The Results From The Site Sampling And/or Testing, Along With Results From Any On Site Inspections Or Condition Assessments. (iv) Provide An Assessment Of Findings From These Results, In Terms Of Environmental Risk Previously Assumed, Infrastructure Risks Previously Assumed, Etc. (v) Include The Sampling/infrastructure Assessment Plan As An Appendix To This Technical Memorandum. (d) Phase Iv: Complete A Decommissioning And Land Use Plan (i) The Entirety Of This Phase Will Be Paid Out As A Fixed Price Item In Accordance With Section B9. (ii) The Goal Of This Phase Of Work Will Be To Complete All Remaining Engagement With The City Project Team, And Correlate The Data Captured In The Phase I Report And Site Testing Technical Memorandum In Order To Develop The Final Decommissioning And Land Use Plan Document. (iii) A Dedicated Meeting With The Proponent’s Project Team And The City Working Group Members In Attendance Will Be Coordinated Following The Submission Of The First Draft Of This Deliverable. (iv) An Interim Submission Of The Proposed Alternative Land Use Concepts Is To Be Submitted To The City Working Group Prior To The Decommissioning And Land Use Plan First Draft. (i) This Interim Submission Will Then Be Reviewed And Discussed With Appropriate External Stakeholders As Required. (ii) Modifications To The Land Use Concepts May Also Be Proposed By City Staff To Incorporate In The Final Report. (iii) The Content Of This Interim Submission Can Be Directly Incorporated Into The Content Of Decommissioning And Land Use Plan Document. (v) The Decommissioning And Land Use Plan Document Will Include The Following At Minimum: (i) Identify All Additional Site Testing, Infrastructure Inspection, Etc. Believed To Be Necessary In The Future To Verify The Environmental Risks, Asset Condition Risks, Etc. (ii) Document All Remediation Options To Address The Assumed Environmental Risks Identified From The Esa And Site Sampling Work. (iii) Include Recommendations Of Remediation Options Based On The Professional Judgement Of The Proponent, Risk Management Approach, Cost-benefit Analysis, Or Any Other Feedback From City Staff. Specifically Identify Remediation Measures, If Any, To Improve The Surface Runoff Water Quality Such That It Can Be Classified As Stormwater Runoff In The Future. (iv) Document Additional Remediation Measures Required To Accommodate Specific Land Uses, As Required. (v) In Specific Remediation Strategies Are Not Feasible, Then This Should Be Stated. (vi) If The Runoff Can Be Classified As Stormwater And No Longer Needs To Be Conveyed To The Newpcc, A Recommended Land Drainage Servicing Plan To Tie Into The Local Stormwater Collection System Shall Be Included In The Document. (vii) Remediation Options Should Address Primarily On-site Remediation Requirements, With The Exception Of Any Environment Remediation Measures Required For The Existing Forcemain Network Servicing The Sludge Drying Beds. (viii) Develop Conceptual Engineering Assessments Of Work(s) Necessary For Decommissioning/abandoning Existing Infrastructure To Support Alternative Land Uses And/or Existing Land Use.  All Infrastructure Supporting The Current Site Operation, Including The Decant Pump Station And The 5.5 Km Forcemain Extents (3.2km Length Prior To Tying Into The Local Wws System, And The Remaining 2.3km Segment Disconnected But Not Removed) Is To Be Included Within The Decommissioning Works Under Consideration. (ix) Specifically Develop Decommissioning Plans Under The Assumption That All Necessary Remediation Measures Are Completed Such That The Surface Water Quality Can Be Classified As Stormwater. (x) Develop Conceptual Engineering Assessments Of New Municipal Infrastructure Required To Support Alternative Land Uses And/or Existing Land Use. (xi) Consider New Municipal Infrastructure Needs With Respect To The Potential Expansion Of The North Perimeter Highway, And Based On The Latest Information Available Related To This Expansion. See D4.6. (xii) Conduct Any Additional Internal Engagement With Stakeholders Within The City Of Winnipeg Real Estate And Land Development Division, The Wastewater Division, And/or Winnipeg Police Service As Part Of The Development Of The Alternative Land Use Options.  Include An Allowance For One (1) Meeting At Minimum With Internal Stakeholders To Raise Alternative Land Use Options And Reach Consensus On Alternative Land Use Options To Be Considered. See D9.5. (xiii) Complete Alternative Land Use Assessments Based On City Needs For The Space, And Plausible Alternative Land Uses For The Site In The Future. (xiv) Provide An Assessment Of Additional Remediation/decommissioning Requirements To Align With The Current Land Use. (xv) Develop A Aace Class 5 Capital Cost Estimates For Remaining Site Testing Recommended In Accordance With D7.1(d)(iv)(i), Along With The Recommended Site Remediation, Decommissioning, And New Infrastructure Installation Works.  Where New Infrastructure Costs, Remediation Option Costs, Or Decommissioning Option Costs Vary Significantly Depending On Alternative Land Uses Identified Above, Include Capital Cost Scenarios Based On Each Land Use/decommissioning Option. Capital Cost Scenarios To Remain At A Class 5 Level Of Definition.  Clearly Identify All New Infrastructure Costs, Remediation Costs, Or Decommissioning Costs Which Will Be Required Regardless Of Land Use Option, At A Class 5 Level Of Definition.  Utilize The Basis Of Estimate (boe), Class Of Estimate (coe) As Part Of Submission Of This Capital Cost Estimate. See D10.7 (xvi) Compare Alternative Land Use Options, Decommissioning Approaches, Etc And Summarize Pros And Cons Of Each.  Utilize The Net Present Value (npv) City Of Winnipeg Investment Planning Templates To Illustrate The Comparison Of Alternative Land Use Options, Specifically In Terms Of Costs And Benefit Impacts To The City Of Winnipeg. See D10.7 (xvii)include Deliverables Associated With D7.1(a) And D7.1(c) As Appendices To Thedocument. The Decommissioning And Alternative Land Uses Report Is Intendedto Be The Final Summary Deliverable Prepared By The Proponent. D7.3.1 Notwithstanding The Foregoing, The Consultant Is Being Engaged By The City For Its Professional Expertise; The Consultant Shall Bring To The City’s Project Manager’s Attention Any Aspect Of The City’s Standards, Manuals, Guidelines Or Templates Which The Consultant Is Of The Opinion Is Not Consistent With Good Industry Practice. D7.4 The Funds Available For This Contract Are $375,000.00. (a)within This Funds Total: (i)$50,000 Is Allocated Towards The Additional Work Allowance

Details: This Is Modification 12 To The Synopsis Entitled Mission Technical Integration Contract (mtic), 80jsc024mtic, Which Was Originally Posted On May 16, 2024. You Are Notified That The Following Changes Are Made: part Three, Four, Five, And Six Of The Mtic Technical Library Are Added To The List Of Attachments. the Due Date For The Submission Of Comments Regarding The Draft Request For Proposal (drfp) Is Extended To January 7, 2025, At 5:00 P.m Central Standard Time. this Is Not A Request For Proposal. No Proposals Are To Be Submitted In Response To This Notice. to Request Access To The Mtic Technical Library, You Must Provide A Completed “mtic Technical Library Request Form” Via Email To Jsc-mtic@mail.nasa.gov. When Responding Reference 80jsc024mtic Mtic-technical Library In The Subject Line. please Note That After The Request Form Is Submitted, You Must Have A Log In For Sam.gov. Once Logged In, Click The Request Access Button In The Attachments/links Section Of The Announcement. all Foreign Nationals From Designated Countries Covered By A Programmatic Technology Transfer Control Plan (pttcp) Or Requiring Access To Export Controlled Information Are Required To Have An Individual Technology Transfer Control Plan (i-ttcp) With A Non-disclosure Agreement (nda). Foreign Nationals From Non-designated Countries Requiring Access To Export-controlled Information Covered By A P-ttcp Are Required To Comply With The International Partner Or Foreign National Certification Contained In The P-ttcp. it Is The Offeror's Responsibility To Monitor This Website For The Release Of The Solicitation And Amendments (if Any). Potential Offerors Will Be Responsible For Downloading Their Own Copy Of The Solicitation And Amendments (if Any). all Questions Should Be Directed To The Points Of Contact Identified Below. Interested Parties Are Responsible For Monitoring This Website For Information Related To This Acquisition. --- End Of Modification 12 --- this Is Modification 11 To The Synopsis Entitled Mission Technical Integration Contract (mtic), 80jsc024mtic, Which Was Originally Posted On May 16, 2024. You Are Notified That The Following Changes Are Made: the Following Applicable Document Is Added To The Attachment Section Of This Posting: draft Request For Proposal 80jsc024mtic L-10 Zip Folder this Is Not A Request For Proposal. No Proposals Are To Be Submitted In Response To This Notice. it Is The Offeror's Responsibility To Monitor This Website For The Release Of The Solicitation And Amendments (if Any). Potential Offerors Will Be Responsible For Downloading Their Own Copy Of The Solicitation And Amendments (if Any). all Questions Should Be Directed To The Points Of Contact Identified Below. Interested Parties Are Responsible For Monitoring This Website For Information Related To This Acquisition. --- End Of Modification 11 --- this Is Modification 10 To The Synopsis Entitled Mission Technical Integration Contract (mtic), 80jsc024mtic, Which Was Originally Posted On May 16, 2024. You Are Notified That The Following Changes Are Made: the Draft Request For Proposal And Applicable Documents Are Hereby Posted In The Attachment Section Of This Posting. The Draft Rfp 80jsc024mtic Zip Folder Includes The Following: mtic Draft Request For Proposal (drfp) Cover Letter mtic Drfp 80jsc025r7002 l-3 Past Performance Relevancy Matrix l-5 Technical Resources Template l-6a Mtic Cost Price Template l-6b Minor Subcontracting Template l-7 Mtic Tcp Rate Build-up Form l-8 Prime Subcontractor Identification And Sow Division Of Work Listing Worksheet l-9 Pre-award Survey Of Prospective Contractor Accounting System Checklist attachment J-12 Iagp And Gfp attachment J-13 Gf Sw, It Sys, & Models, Contractor Hosted And Sustained Apps, And Licenses attachment J-17 Dd 254, Contract Security Classification Specification attachment J-18 Department Of Labor Wage Determination attachment J-19 Managed Documents mtic Template For Submission Of Comments Is Posted In The Attachment Section Of This Posting. contracting Officer Point Of Contact Updated. this Is Not A Request For Proposal. No Proposals Are To Be Submitted In Response To This Notice. this Notice Is Issued By The Nasa/jsc To Post A Draft Rfp To Solicit Responses From Interested Parties. This Document Is For Information And Planning Purposes And To Allow Industry The Opportunity To Verify Reasonableness And Feasibility Of The Requirement, As Well As Promote Competition. nasa Clause 1852.215-84, Ombudsman, Is Applicable. The Center Ombudsman For This Acquisition Can Be Found At Https://www.hq.nasa.gov/office/procurement/regs/procurement-ombuds-comp-advocate-listing.pdf. this Draft Rfp Is Not To Be Construed As A Commitment By The Government, Nor Will The Government Pay For The Information Submitted In Response. The Government May Not Respond To Questions/concerns Submitted. The Government Will Use The Information To Finalize The Rfp As Necessary. all Comments Or Questions Regarding The Draft Rfp Shall Be Submitted Electronically Utilizing The “mtic Template For Submission Of Comments” Via Email To Jsc-mtic@mail.nasa.gov, No Later Than January 3, 2025, At 5:00 P.m. Central Standard Time. When Responding Reference 80jsc025r7002 Mtic-drfp. if A Solicitation Is Released, Then It And Any Additional Documents Will Be Available On Www.sam.gov. It Is The Offeror's Responsibility To Monitor This Website For The Release Of The Solicitation And Amendments (if Any). Potential Offerors Will Be Responsible For Downloading Their Own Copy Of The Solicitation And Amendments, If Any. it Is The Offeror's Responsibility To Monitor This Website For The Release Of The Solicitation And Amendments (if Any). Potential Offerors Will Be Responsible For Downloading Their Own Copy Of The Solicitation And Amendments (if Any). nasa Intends To Publicize A Listing Of Respondents In Order To Facilitate Teaming Arrangements. Should Your Firm Desire Not To Be Included In This Listing, Clearly Indicate This Desire In Your Response. obtaining Access To Export Controlled Content: to Request Access To The Mtic Technical Library, Please Complete The Technical Library Request Form In The "attachments" Section Below. Once The Technical Library Request Form Is Submitted Through E-mail To Jsc-mtic@mail.nasa.gov, Please Request Access To All Mtic Technical Library Zip Folders In The "attachments" Section In Sam.gov. If Approved, You Will Be Granted Access To All Mtic Technical Library Zip Documents. please Note That After Submitting The Technical Library Request Form, You Must Have A Log In For Sam.gov. Once Logged In, Click The Request Access Button In The Attachments/links Section Of The Announcement. all Questions Should Be Directed To The Points Of Contact Identified Below. Interested Parties Are Responsible For Monitoring This Website For Information Related To This Acquisition. --- End Of Modification 10 --- this Is Modification 9 To The Synopsis Entitled Mission Technical Integration Contract (mtic), 80jsc024mtic, Which Was Originally Posted On May 16, 2024. You Are Notified That The Following Changes Are Made:part One And Two Of The Technical Library Are Available And The Following Documents Are Added To The List Of Attachments: mtic Industry Update Charts mtic Requirements Points Of Contacts mtic Industry Update Interested Parties List mtic Industry Update Questions And Answers mtic Technical Library Reference Document Part One And Two mtic Technical Library Part One mtic Technical Library Part Two mtic Technical Library Request Form to Request Access To The Mtic Technical Library, You Must Provide A Completed “mtic Technical Library Request Form” Via Email To Jsc-mtic@mail.nasa.gov. When Responding Reference 80jsc024mtic Mtic-technical Library In The Subject Line. please Note That After The Request Form Is Submitted, You Must Have A Log In For Sam.gov. Once Logged In, Click The Request Access Button In The Attachments/links Section Of The Announcement. all Foreign Nationals From Designated Countries Covered By A Programmatic Technology Transfer Control Plan (pttcp) Or Requiring Access To Export Controlled Information Are Required To Have An Individual Technology Transfer Control Plan (i-ttcp) With A Non-disclosure Agreement (nda). Foreign Nationals From Non-designated Countries Requiring Access To Export-controlled Information Covered By A P-ttcp Are Required To Comply With The International Partner Or Foreign National Certification Contained In The P-ttcp. all Questions Should Be Directed To The Points Of Contact Identified Below. Interested Parties Are Responsible For Monitoring This Website For Information Related To This Acquisition. --- End Of Modification 9 --- this Is Modification 8 To The Synopsis Entitled Mission Technical Integration Contract (mtic), 80jsc024mtic, Which Was Originally Posted On May 16, 2024. You Are Notified That The Following Changes Are Made: to Facilitate Open Communication With Industry, Nasa Johnson Space Center (jsc) Plans To Conduct An Industry Update For Mtic. The Presentation Date Has Changed From Thursday, September 5, 2024, At 9:00am To 11:00am Central Standard Time (cst) To Friday, September 6, 2024, At 9:00am To 11:00am Central Standard Time (cst). please Rsvp For Industry Update Via Email At Jsc-mtic@mail.nasa.gov By 12:00pm Cst On Thursday, September 5, 2024. A Microsoft Teams Meeting Notice Will Be Provided For Those Who Rsvp To This Announcement. All Previous Rsvps Are Still Valid. Attendance Information Should Include The Following: company Name point Of Contact Name point Of Contact Email business Size please Email Any Questions To Eric S. Festa At Jsc-mtic@mail.nasa.gov. The Government Will Officially Respond To All Questions By Posting Responses To Sam.gov And The Mtic Website After The Industry Update Event. all Questions Should Be Directed To The Points Of Contact Identified Below. Interested Parties Are Responsible For Monitoring This Website For Information Related To This Acquisition. --- End Of Modification 8 --- this Is Modification 7 To The Synopsis Entitled Mission Technical Integration Contract (mtic), 80jsc024mtic, Which Was Originally Posted On May 16, 2024. You Are Notified That The Following Changes Are Made: to Facilitate Open Communication With Industry, Nasa Johnson Space Center (jsc) Plans To Conduct An Industry Update For Mtic. The Presentation Will Be Held On Thursday, September 5, 2024, At 9:00am To 11:00am Central Standard Time (cst). The Industry Update Will Be Conducted Virtually Via Teams. please Rsvp For Industry Update Via Email At Jsc-mtic@mail.nasa.gov By 12:00pm Cst On Wednesday, September 4, 2024. A Microsoft Teams Meeting Notice Will Be Provided For Those Who Rsvp To This Announcement. Attendance Information Should Include The Following: company Name point Of Contact Name point Of Contact Email business Size please Email Any Questions To Eric S. Festa At Jsc-mtic@mail.nasa.gov. The Government Will Officially Respond To All Questions By Posting Responses To Sam.gov And The Mtic Website After The Industry Update Event. all Questions Should Be Directed To The Points Of Contact Identified Below. Interested Parties Are Responsible For Monitoring This Website For Information Related To This Acquisition. --- End Of Modification 7 --- this Is Modification 6 To The Synopsis Entitled Mission Technical Integration Contract (mtic), 80jsc024mtic, Which Was Originally Posted On May 16, 2024. You Are Notified That The Following Changes Are Made:the “mtic Industry Day Questions And Answers” Is Added To The List Of Attachments. all Questions Should Be Directed To The Points Of Contact Identified Below. Interested Parties Are Responsible For Monitoring This Website For Information Related To This Acquisition. --- End Of Modification 6 --- this Is Modification 5 To The Synopsis Entitled Mission Technical Integration Contract (mtic), 80jsc024mtic, Which Was Originally Posted On May 16, 2024. You Are Notified That The Following Changes Are Made:the “mtic Interested Parties List” Is Added To The List Of Attachments. all Questions Should Be Directed To The Points Of Contact Identified Below. Interested Parties Are Responsible For Monitoring This Website For Information Related To This Acquisition. --- End Of Modification 5 --- this Is Modification 4 To The Synopsis Entitled Mission Technical Integration Contract (mtic), 80jsc024mtic, Which Was Originally Posted On May 16, 2024. You Are Notified That The Following Changes Are Made:the “mtic Industry Day Charts” Are Added To The List Of Attachments. all Questions Should Be Directed To The Points Of Contact Identified Below. Interested Parties Are Responsible For Monitoring This Website For Information Related To This Acquisition. --- End Of Modification 4 --- modification 3 this Is Modification 3 To The Rfi Entitledmission Technical Integration Contract (mtic), 80jsc024mtic, Which Was Originally Posted On May 16, 2024. You Are Notified That The Following Changes Are Made: 1. The Following Location Has Been Added For An In-person Industry Day Option. industry Day Will Be Held In A Hybrid Format. The In-person Option For Industry Day Will Be At The Following Location: gilruth Conference Center lone Star Room johnson Space Center (jsc) 2101 E Nasa Pkwy, Houston, Tx 77058 2. Corrected The Secondary Point Of Contact Email From Jsc-mitc@mail.nasa.gov To Jsc-mtic@mail.nasa.gov. the Due Date For Responses Is Not Extended. offerors Are Responsible For Monitoring This Site For The Release Of The Solicitation And Any Amendments. Potential Offerors Are Responsible For Downloading Their Own Copy Of The Solicitation And Amendments (if Any). --- End Of Modification 3 --- modification 2 - May 22, 2024 this Is Modification 2 To The Rfi Entitledmission Technical Integration Contract (mtic), 80jsc024mtic, Which Was Posted On May 16, 2024. You Are Notified That The Following Changes Are Made: added Clarifying Language Regarding The Page Count Limitations. Additionally, Added The Industry Day Announcement.corrected Spelling Errors In Modification 1. the Due Date For Responses Is Not Extended. offerors Are Responsible For Monitoring This Site For The Release Of The Solicitation And Any Amendments. Potential Offerors Are Responsible For Downloading Their Own Copy Of The Solicitation And Amendments (if Any). --- End Of Modification 2 --- modification 1 - May 20, 2024 this Is Modification1 To The Rfi Entitledmission Technical Integration Contract (mtic), 80jsc024mtic, Which Was Posted On May 16, 2024. You Are Notified That The Following Changes Are Made: changed The Email Inbox Address From Jsc-mtic@nasa.gov To Jsc-mtic@mail.nasa.gov. the Due Date For Responses Is Not Extended. offerors Are Responsible For Monitoring This Site For The Release Of The Solicitation And Any Amendments. Potential Offerors Are Responsible For Downloading Their Own Copy Of The Solicitation And Amendments (if Any). --- End Of Modification 1 --- background the National Aeronautics And Space Administration (nasa) Lyndon B. Johnson Space Center (jsc) Is Hereby Soliciting Information From Potential Sources For The Mission Technical Integration Contract (mtic). Mtic Is The Follow-on Acquisition For The Human Space Flight Technical Integration Contract (hsftic). See Enclosed “historical Scope Of Work” For Detailed Requirements. current Contractor: Barrios Technology, Ltd.; contract Number: 80jsc020c0017; estimated Contract Value: Approximately $337 Million; contract Expiration Date: September 30, 2025 the Government Does Not Intend To Acquire A Commercial Item Using Far Part 12. the Naics Code And Size Standard Are 541715 And 1,000 Employees, Respectively. information Requested nasa Jsc Is Seeking Capability Statements From All Interested Parties, Including All Socioeconomic Categories Of Small Businesses And Historically Black Colleges And Universities (hbcu)/minority Institutions (mi), And Members Of The Underserved Communities As Defined By Executive Order 13985, Advancing Racial Equity And Support For Underserved Communities Through The Federal Government, For The Purposes Of Determining The Appropriate Level Of Competition And/or Small Business Subcontracting Goals For Mtic. The Government Reserves The Right To Consider A Small, 8(a), Women-owned (wosb), Service Disabled Veteran (sd-vosb), Economically Disadvantaged Women-owned Small Business (edwosb) Or Hubzone Business Set-aside Based On Responses Received. additionally, In Support Of The Executive Order (eo) 13985, Advancing Racial Equity And Support For Underserved Communities Through The Federal Government, Nasa Is Seeking To Advance Equity Or Remove Barriers For Members Of Underserved Communities Related To This Requirement. As Defined In The Eo, Underserved Communities Refers To Populations Sharing A Particular Characteristic, As Well As Geographic Communities, That Have Been Systematically Denied A Full Opportunity To Participate In Aspects Of Economic, Social, And Civic Life, As Exemplified By The List In The Preceding Definition Of "equity." Equity Means The Consistent And Systematic Fair, Just, And Impartial Treatment Of All Individuals, Including Individuals Who Belong To Underserved Communities That Have Been Denied Such Treatment, Such As Black, Latino, And Indigenous And Native American Persons, Asian Americans And Pacific Islanders And Other Persons Of Color; Members Of Religious Minorities; Lesbian, Gay, Bisexual, Transgender, And Queer (lgbtq+) Persons; Persons With Disabilities; Persons Who Live In Rural Areas; And Persons Otherwise Adversely Affected By Persistent Poverty Or Inequality. the Following Requested Inputs Are Limited To No More Than Five Pages Total For Inputs One And Two. Inputs Three Through Six And Responses To The Oci Request Are Unlimited. interested Firms Having The Required Capabilities Necessary To Meet The Following Requirements Described Herein Should Submit A Capability Statement Of No More Than Five Pages Indicating The Ability To Perform All Aspects Of The Effort. Mtic Will Provide Program Management Business Management, Configuration Management And Data Management, Information Technology, Systems Engineering And Integration, Mission Integration, Operations, Safety And Mission Assurance/program Risk, And Program Research And Communication Support Services. Please See The Enclosed Document Entitled “historical Scope Of Work” To Determine Your Ability To Perform All Aspects Of This Effort.[cok(b1] in Addition To The Information Requested Above, Interested Parties May Also Provide Optional Comments On This Potential Acquisition Regarding Contract Type, Structure, Incentive Arrangements, Evaluation Criteria, Or Performance Metrics. to Support The Requirements Identified In This Request For Information (rfi)/sources Sought Notification, What Barriers Or Opportunities Exist To Engage Subject Matter Experts From Industry And Academia And How Can Those Barriers Be Overcome? How Can Underserved Communities Be Leveraged? to Support The Requirements Identified In This Rfi, What Barriers Or Opportunities Exist To Partner With Subcontractors That Employ Members Of Underserved Communities, As Defined Above? what Other Recommendations Would You Make To Enhance Diversity And Inclusion? what Should Be Considered To Encourage Full Participation And Contribution Of Organizations And Individuals (e.g., Outreach Efforts And Innovative Partnerships) In Performance Of This Requirement? organizational Conflicts Of Interest (oci): nasa/jsc Is Requesting Information From Industry Regarding Potential Organizational Conflicts Of Interest (oci) Arising From Mtic. the Nature Of The Work Anticipated Under Mtic May Create The Potential For Oci(s) As Currently Described In Far Subpart 9.5. Each Interested Party Should Review Far Subpart 9.5 In Light Of Nasa’s Anticipation Of Oci Issues And Consider Carefully The Extent To Which An Oci May Arise Before Making The Decision To Compete For The Mission Technical Integration Contract. nasa Seeks Input In The Following Areas. Interested Parties Are Requested To Address The Following Questions: 1. What Type(s) Of Oci Issues Would Your Company Or Potential Team Identify, If Any, Should You Choose To Propose On The Mission Technical Integration Contract? 2. What Strategies Would You Anticipate Proposing To Mitigate The Oci Issues That You Identified (if Any)? Please Provide Strategy Details, Previous Examples/experience With Other Contracts With Nasa Or Other Agencies, Etc. 3. Are There Any Other Types Of Potential Oci Issues With The Proposed Mtic Contract That Were Not Identified In This Rfi (assuming Any Were Identified)? 4. Does Your Company Foresee Any Oci Issues Associated With The Mtic Contract That Would Cause You To Decide Not To Propose On The Potential Mission Technical Integration Contract Rfp? nasa Will Review Any Responses Received Regarding Potential Oci And Each Offeror’s Proposed Oci Mitigation Strategy. Nasa Will Respond To Each Company Who Submits A Mitigation Strategy. Nasa’s Response Is Not Intended To Serve As A Confirmation That, In Fact, All Potential Oci Have Been Identified, An Oci Will Ultimately Exist, Or That An Interested Party Is Capable Of Successfully Eliminating Or Mitigating An Identified Oci. Nasa’s Response Is Also Not Intended To Encourage Or Discourage Any Interested Party From Responding To An Rfp Issued For Mission Technical Integration Contract In The Future. Furthermore, Nasa’s Response In No Way Alters Or Interprets Far 9.5 As It Applies To A Final Statement Of Work Or A Final Proposal Submission, Should An Interest Party Elect To Submit A Proposal To An Rfp For Mission Technical Integration Contract. Subsequent To The Initial Oci Submission And Nasa’s Response, Nasa Will Not Consider Further Information As It Relates To This Rfi. submission Instructions: all Questions Should Be Directed To The Point Of Contact Identified Below. In Accordance With Far 15.201(e), Responses To This Notice Are Not Offers And Cannot Be Accepted By Nasa To Form A Binding Contract. Nasa Is Under No Obligation To Issue A Solicitation Or To Award Any Contract On The Basis Of This Rfi. Nasa Will Not Pay For Any Information Solicited Under This Rfi. No Solicitation Exists; Therefore, Do Not Request A Copy Of A Solicitation. If A Solicitation Is Released It Will Be Synopsized On Sam.gov. It Is The Interested Party’s Responsibility To Monitor This Website For The Release Of Any Subsequent Solicitation Or Synopsis. all Responses Shall Be Submitted Electronically Via Email To Eric S. Festa At Jsc-mtic@mail.nasa.gov No Later Than 12:00pm, Central Time Zone On June 17th, 2024. Please Reference Mission Technical Integration Contract In Any Response. point Of Contact name: Eric S. Festa title: Contract Specialist email: Jsc-mtic@mail.nasa.gov the Documents On The Nasa Mtic Acquisition Website ( Https://www.nasa.gov/johnson/jsc-procurement/mtic/)are For Information And Planning Purposes, To Allow Industry The Opportunity To Comment, And To Promote Competition Only. Nasa Will Not Affirmatively Release Any Information Received In Response To This Rfi To The Public, But May Use Information Received In Developing The Best Approach For A Contract Strategy, And Therefore Such Information May Be Recognizable To The Interested Party Who Submitted It. Any Information Submitted In Response To This Rfi That Is Marked As “confidential Commercial Or Financial Information” Will Be Considered As Voluntarily Submitted In Accordance With The Freedom Of Information Act. nasa Intends To Publicize A Listing Of Respondents In Order To Facilitate Teaming Arrangements. Should Your Firm Desire Not To Be Included In This Listing, Clearly Indicate This Desire In Your Response. nasa Clause 1852.215-84, Ombudsman, Is Applicable. The Center Ombudsman For This Acquisition Can Be Found At : Https://www.hq.nasa.gov/office/procurement/regs/procurement-ombuds-comp-advocate-listing.pdf industry Day: to Facilitate Open Communication With Industry, Nasa Johnson Space Center (jsc) Plans To Conduct An Industry Day For Mtic. The Presentation For Industry Day Will Be Held Ontuesday, June 18, 2024, At 9:00am To 11:00am Central Standard Time (cst). Industry Day Will Be Held Either Virtually Or Hybrid. A Location Will Be Provided In A Future Modification To This Announcement If An In Person Option Is Available. a Microsoft Teams Meeting Notice Will Be Provided For Those Who Rsvp To This Announcement. the Government Will Also Provide One-on-one Communication Opportunities In Person Or Virtually Ontuesday, June 18, 2024 Between 1:00pm And 5:00pm Cstandvirtually On Thursday, June 20, 2024, Between 9:00am And 1:00pm Cst. One-on-one Meetings Will Be Held In The Gilruth Conference Center Or Via Teams And Will Not Exceed 20 Minutes. Participation Is Limited To Five (5) Individuals From Each Company/team. please Rsvp For Industry Day Via Email At Jsc-mtic@mail.nasa.gov By4:00pm Cst Onfriday, June 14, 2024. Attendance Information Should Include Company Name, Name/representative, And Point Of Contact Information. Please Indicate If You Prefer To Attend In Person Or Via Teams. please Email Any Questions To Eric S. Festa At Jsc-mtic@mail.nasa.gov. The Government Will Officially Respond To All Questions By Posting Responses To Sam.gov And The Mtic Website After Industry Day. one-on-one Meetings to Facilitate Interactive Communications With Industry, Jsc Personnel Will Also Be Available For Meetings With Individual Companies In Conjunction With Industry Day. The Meetings Are Intended To Be Q&a Sessions In Which Neither Side Will Make A Formal Presentation. To Request A One-on-one Meeting, Please Respond Affirmatively In Your Rsvp Per The Instructions Above. the Following Topics May Be Discussed At The One-on-one Meetings: the General Purpose Of The Announced Procurement; any Information About The Mtic Acquisition That Nasa Has Already Made Accessible To The Public Or Is Otherwise Being Made Available To All Potential Offerors; historical Information About The General Nature Or Scope Of Prior Contracts Whose Requirements Will Be Addressed In Whole Or In Part Under A Follow-on Procurement; information That Describes The Federal Procurement Process As Defined By The Federal Acquisition Regulation (far), Nasa Far Supplement (nfs), Or Other Published Procurement Policy Documents; And procurement Specific Information Already Published Such As Information Contained In The Historical Scope Of Work And Sources Sought Synopsis. questions Regarding The Subjects Belowwill Notbe Discussed: proprietary Or Confidential Business Information Of Incumbent Contractor(s) Or Other Business Entities; privacy Act Protected Information Such As, Incumbent Contractor Employees’ Personal Data; trade Secrets Act Protected Information; speculation On What The Government Might Be Looking For In Proposals; different Technical And Management Approaches; technical Efficiencies; any Particular Government Emphasis; And incumbent’s Performance. a Confirmation Email Will Be Sent To Acknowledge Your Reservation(s) And Provide Further Instructions. no Recordings Of Any Kind Are Permitted Of The Industry Day Presentation Or One-on-one Sessions. nasa Anticipates Releasing The Industry Day Charts Prior To Industry Day. Offerors Are Responsible For Monitoring This Site For The Release Of The Solicitation And Any Amendments. Potential Offerors Are Responsible For Downloading Their Own Copy Of The Solicitation And Amendments (if Any).