Survey Tenders

Details: Description 2025 National Expenditure Program (nep) For General Appropriation Act (gaa) 2025 Fund, Invites Contractors To Submit Bids For The Following Contract: Contract Reference No. : Niar9-egpipcluster32025-020 (infra) Project Name : Zamboanga Sibugay Imo Projects Contract Location : Ipil, Tungawan, Siay & Titay Scope Of Works : Construction Of Solar Powered Pump With Ai Satellite-assisted Monitoring And Fertigation System (cluster 3) Approved Budget For The Contract (abc) : Php 98,884,346.16 Contract Duration : 270 Calendar Days Amount Of Bidding Documents : Php 50,000.00 The Nia – Ro9 Bac Is Conducting A Public Bidding For This Contract In Accordance With Republic Act 9184, Otherwise Known As The “government Procurement Reform Act” And Its Revised Implementing Rules And Regulations (rirr). To Be Eligible To Bid For The Above-stated Contract, A Contractor Must Meet The Following Major Requirements: (a) Filipino Citizen Or 60% Filipino-owned Partnership/corporation; (b) Completion Of A Similar Contract Costing At Least 50% Of The Abc, And (c) Net Financial Contracting Capacity (nfcc) At Least Equal To Abc. Interested Bidders Are Required To Submit Two (2) Valid Ids Of The Authorized Managing Officer/authorized Liaison Officer Indicated In The Submitted Company Profile/crc. Updated Company Profile Shall Also Be Submitted And Presented To The Nia-r9 Bac Secretariat Upon Purchased Of The Bidding Documents. Credit Line Commitment Shall No Longer Be Accepted As An Alternative To The Prospective Bidder’s Computation Of Nfcc Per Gppb Resolution No. 20-2013 Dated July 30, 2013. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion In The Eligibility Check, Preliminary Evaluation Of Bids, Post Qualification, And Award. The Significant Times And Deadlines Of Procurement Activities Are Shown Below: Issuance Of Bidding Documents : January 9 – 15, 2025 At 8:30 Am Pre-bid Conference : January 16, 2025 At 9:00 Am Submission Of Bids : January 28, 2025 At 8:30 Am Opening Of Bids : January 28, 2025 At 9:00 Am Interested Bidders May Obtain Further Information From Nia – Ro9 Bac And Inspect The Bidding Documents At The Address Given Below Starting January 9 – 28, 2025. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders From The Address Below And Upon Payment Of A Non-refundable Fee For The Bidding Documents Prescribed In The Above-mentioned List Of Projects. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. Only The Authorized Managing Officer/authorized Liaison Officer Indicated In The Submitted Company Profile/crc Shall Be Authorized To Purchase And Submit Bidding Documents. The Use Of Special Power Of Attorney (spa) Is Prohibited As Per Nia Memorandum Circular No.52 Series 2014 Dated December 1, 2014. The Nia – Ro9 Bac Will Hold A Pre-bid Conference On 16 January 2025 At 9:00 Am At Conference Room, National Irrigation Administration – Regional Office Ix, Regional Center, Balintawak, Pagadian City, Which Shall Be Open To All Interested Parties. Bids Must Be Duly Received By The Bac Secretariat Thru Manual Submission At The Office Address As Indicated Below On Or Before 28 January 2025 At 08:30 Am. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Securing Declaration Or Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb. Clause 18.1. Bids Will Be Opened In The Presence Of The Bidder’s Authorized Managing Officer Or Authorized Liaison Officer Of Interested Parties At The Address Below. The Nia – Ro9 Bac Additional Guidelines Is The Conduct Of Site Inspection To Be Scheduled During Pre-bid Conference. • The Certificate Of Site Inspection Shall Be Issued And Signed By The Nia R9 Authorized Representative After The Activity, Which Shall Be Required To Include In The Bid Tender (technical Component). Prospective Bidders Shall Submit Their Sealed Envelopes Together With The Duly Accomplished Forms As Provided In The Bd’s On Or Before The Deadline Of Dropping Of The Bid Documents At The Nia – Ro9 Bac By The Authorized Managing Officer (amo) Or Authorized Liaison Officer Indicated In The Submitted Company Profile/crc Of The Parties. The Liaison Officer Shall Submit A Letter From The Amo Authorizing Her/him To Drop Their Bid, Attend The Bidding Process And Also Submit A Copy Of Company I.d. For Verification. No Special Power Of Attorney (spa) Shall Be Allowed. The Procuring Entity Shall Not Be Held Responsible Of Any And All Bid Documents/proposals Losses. All Interested Contractors/bidders Must Inform The Bac Chairperson Thru Its Secretariat Of Their Documents Submitted In Any Means Provided Above Before The Date Of The Bid Opening To Avoid Late Submission. The Nia – Ro9 Bac Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders, In Accordance With The Provisions Of Section 41 Of Ra 9184 And Its Irr. Pursuant To Nia Memorandum Circular No. 119 S. 2020, Subject: Policy On Utilization Of Videoconferencing, Webcasting Or Similar Technology In The Conduct Of Public Procurement Activities, Procurement Proceedings For The Above Mention Contracts Will Be Held Through Face-to-face Meeting In Combination With Video Conferencing Using Google Meet Thru The Links: Pre-bidding Conference : Https://meet.google.com/mhf-qztj-ggs Opening Of Bids : Https://meet.google.com/qdi-eomz-cfs 5.2 For This Purpose, Contracts Similar To The Project Refer To Contracts Which Have The Same Major Categories Of Work, Which Shall Be: Completed For The Past Five (5) Years. • Well Drilling, Supply/installation Of Pump Irrigation Projects With Mechanical, Irrigation & Flood Control And Electrical Works To Be Eligible To Bid For The Contract, Bidders Must Have Done A Single Largest Completed Contract (slcc) Containing A Category Of Work Which Is The Same As Or Similar To The Major Category Of Works, And Who’s Total Slcc Cost Is At Least 50% Of The Approved Budget For The Contract (abc) To Be Bid. The Above Slcc Must Be Supported By A Copy Of The Contract, Certificate Of Completion, And Owner’s Certificate Of Final Acceptance (1-year After The Issuance Of The Certificate Of Completion) Issued By The Project Owner Other Than The Contractor Or A Final Rating Of At Least Satisfactory In The Constructors Performance Evaluation System (cpes). In Case Of Contracts With The Private Sector, An Equivalent Document Shall Be Submitted. 10.3 A Valid Pcab License Is Required, And In Case Of Joint Ventures, A Valid Special Pcab License, And Registration For The Type And Cost Of The Contract For This Project. Interested Bidders Shall Have At Least Or Any Equivalent To Pcab Size Range “medium A” Category: “b”, Sp-wd (well-drilling Work), Sp-ee (electrical Works), And Sp-me (mechanical Works). Additional Valid Certificate Of Well Driller Registration Issued By The National Water Resources Board (nwrb) Will Be Evaluated. 10.4 The Key Personnel Must Meet The Required Minimum Years Of Experience Set Below: Key Personnel Relevant Experience General Experience Number Project Engineer 3 Years A Licensed Civil Engineer. Experienced In Solar Powered Irrigation Projects. Shall Render Full-time Service To The Project Until Completion. 5 Years 4 Office Engineer 3 Years A Licensed Civil Engineer. Shall Render Full-time Service To The Project Until Completion. 5 Years 1 Materials Engineer 3 Years Shall Be An Accredited Material Engineer Of Dpwh. Shall Render Service To The Project As Required. 5 Years 1 Foreman 5 Years Experienced In Solar Powered Irrigation Projects. Shall Render Full-time Service To The Project Until Completion. 5 Years 4 Safety & Health Officer (so2) 3 Years Shall Have At Least 3 Years’ Experience In Construction Industry. Completed Cosh Training And Shall Render Fulltime Service To The Project Until Completion. 3 Years 4 Geologist 3 Years A Licensed Geologist With Experience In Solar Powered Irrigation Projects. Shall Render Service To The Project As Required. 5 Years 1 Electrical Engineer 3 Years A Licensed Electrical Engineer With Experience In Solar Powered Irrigation Projects. Shall Render Service To The Project As Required. 5 Years 1 Mechanical Engineer 3 Years A Licensed Mechanical Engineer With Experience In Solar Powered Irrigation Projects. Shall Render Service To The Project As Required. 5 Years 1 The Contractor May Assign Other Support Personnel From Those Listed For The Optimal Performance Of The Project Construction Team. The Support Personnel Shall Undertake The Required Day-to-day Site Or Office-related Activities Of The Contractor. Full Time Services Mean, The Personnel Involved Shall Render Minimum Of Eight (8) Hours A Day Or Forty (40) Hour A Week And Shall Be Available Upon Request Of The Procuring Entity. 10.5 The Minimum Major Equipment Requirements Are The Following: Equipment Capacity No. Of Units Crawler Type Drilling Rig (rotary Or Hydraulic Driven) 100m 4 Compressor 160 Cfm 4 Generator Set 15kva 6 Water Pump (for Pump Testing) 15hp 2 Dump Truck 10 Cu.m. 6 Dump Truck 4 Cu.m. 6 Welding Machine 300a 6 Concrete Mixer 1-bagger 6 Concrete Vibrator 5hp 6 Butt Fusion Machine Up To 4” Diameter 2 Service Vehicle 4x4 Pick-up 1 Geo-resistivity Equipment (multi-electrode) Up To 100m Depth 1 Survey Instrument 1 Set Initial Equipment Requirement Upon Mobilization: Equipment Capacity No. Of Units Crawler Type Drilling Rig (rotary Or Hydraulic Driven) 100m 4 Dump Truck 10 Cu.m. 6 Dump Truck 4 Cu.m. 6 Service Vehicle 4x4 Pick-up 1 Geo-resistivity Equipment (multi-electrode) Up To 100m Depth 1 Survey Instrument 1 Set The Proof Of Ownership Of Equipment Requirements Are Copies Of Current Lto Official Receipt (or) And Certificate Of Registration (cr) Of The Equipment Which Should Be Attached Together With The Affidavit Of Ownership. In Case Of Leased Equipment, A Lease Contract And Affidavit Of Commitment Or Certificate Of Availability Of Equipment Should Be Submitted With The Lessor/owner As The Pledger Of The Equipment, Stating Therein That The Equipment Will Be Available For The Whole Duration Of The Project. For Purchase Agreement, The Description Of The Equipment To Be Purchased Such As Brand/model, Type Of Equipment, Motor No., Body No. And The Capacity Must Be Indicated In The Document, Otherwise, The Bac Will Not Honor The Purchase Agreement And The Bidder Will Be Declared As Non-complying. Likewise, List Of Contractor’s Major Equipment Units Pledged To Be Used For The Project Must Be Supported By Proof Of Ownership If It Is Owned, Lease Agreement If It Is Being Leased And Purchase Agreement If To Be Purchased. A Certification Of Availability Of Equipment For The Duration Of The Project Must Also Be Provided By The Equipment Owner And/or Lessor/vendor. The Bidder Should Also Specify In The Submitted Bid The Location Of The Equipment Where It Can Be Inspected. If Any Piece Of Equipment Is Not In The Specified Location, Then The Bidder Shall Be Post-disqualified.

Details: Edit On 6/03/2024- Posting Current Awardee List As Of 06/03/2024. No Other Changes. amendment 4 03/21/2024- Updating/adding New Scopes And Location Options To Lmir Bpa. Updated Base Evalation Verbiage. See Amendment 4 Attachments For Futher Details. posting Current Awardee List As Of 10/02/2023. No Other Changes. edit On 10/12/2023- Updating Poc Info. No Other Changes. edit On 3/20/2023- Updating Poc Info. No Other Changes. amendment 3 03/16/2023- Amended The Response Due Date As This Is An Open Continuous Bpa. No Other Changes. amendment 2 01/27/2023- Adding Q&a And Adding General Information And Q&a Meeting Information That Will Be On 02/01/2023 10:00am (pt). Call In Information Below. amendment 1 01/24/2023-see Attachment And Updated Documents For More Detail. Awards Start 02/01/2023 But This Is An Open Continuous Bpa. Quotes May Be Accepted The Entire Life Of The Bpa. Contractors Are Not Required To Submit Pricing For Every Item; Only The Ones They Choose. Contractors Should Only Mark Wich Locations They Wish To Do The Work In. There Is Not Requirement To Mark Every Location On The Spreadsheet. the Land Management Integrated Resources Bpa (lmir) Is A National Bpa That Will Consist Of A Large Variety Of Work Including Professional Services, Natural Resources Restoration, Engineering, Project Management, Nepa, Communications, And More. The Bpa Will Have A Period Of Performance From Early Spring 2023 Through Early Spring 2033 And Can Be Utilities On All Forests And Grasslands And Is Available For All Federal Agencies To Utilize. This Solicitation Will Remain Open And Continuous To Add Vendors When Determined Necessary For The 10-year Period It Is Active.make Sure Your Firm Is Updated And Registered In The System For Award Management System (sam) And Current To Conduct Government Business. please Read The Entire Solicitation Thoroughly To Ensure All Requirements In Your Response Are Included. scope Of Blanket Purchase Agreement work Includes But Is Not Limited To The Following: typical Service Activities project Management subleader To The Project Manager equipment Team Leader inspection Services (road Construction/engineering, Etc.) heritage/archaeologist landscape Architect botany fish Biologist wildlife Biologist non-native Fish Control And Eradication/fish Screening/bypassing design And Implementation Of Aquatic Organism Passage/stream Simulation hydrologist hazardous Materials soils Scientist geologist tribal Liaison communications Specialist community Engagement Specialist/liaison technology Specialists data Steward (lower Grade Than Technical Specialist For Data Entry And Admin Support Needs) architect/engineer surveyor forester professional Tree Services culturalist economist climate Specialists nepa/environmental Compliance Coordinator tree Planting stocking Surveys invasive Plant Control treating Invasive Plants Using Herbicides Or Manual Control Methods. restoration Services road Decommissioning/obliteration/soil De-compaction. stream/riparian/wetland Restoration/channel Realignment sediment/erosion Control. plant Material Collection/inventory/mapping native Grass And Forb Seed And Straw Production plant Propagation tree Climbing And Cone/seed Collection/tree Cooler Maintenance And Servicing aerial Seeding/mulching Application/project Material(s) Transport

Details: Sources Sought Notice For Indian Ecomomic Enterprises (iee), Indian Small Business Economic Enterprises (isbee) Or Small Business Or Other Than Small Business – This Is Not A Solicitation For Proposal And No Contract Shall Be Awarded From This Notice. there Is No Solicitation At This Time. This Request For Capability Information Does Not Constitute A Request For Proposals; Submission Of Any Information In Response To This Market Survey Is Purely Voluntary; The Government Assumes No Financial Responsibility For Any Costs Incurred. the Indian Health Service (ihs), Phoenix Area Office (pao), Division Of Acquisition Management (dam) Is Issuing This Sources Sought Synopsis As A Means Of Conducting Market Research To Identify Parties Having An Interest In And The Resources To Support On Providing Brand Name Omnicell Xt Automated Dispensing Cabinets And Safes To The Ihs, Fort Yuma Health Center Located In Winterhaven, Ca. Reference Ihs1503544-ftym. requirement: See Attachment delivery To: Fort Yuma Health Center, 401 Picacho Road, Winterhaven, Ca 92283 the Applicable North American Industry Classification System (naics) Code Assigned To This Procurement Is 339114 (dental Equipment And Supplies Manufacturing) With An Associated Small Business Size Standard Of 750 Employees. an E-mail Letter Of Interest That Includes Your Firm’s Capability Statement Highlighting Past Performance For Similar Deliveries Performed Within The Past 5 Years And Indicate The Following Social Economic Status Information Is All That Is Required At This Time. is Your Firm A: ___ Indian Small Business Economic Enterprise/native Owned Small Business or ___ Small Business (sb), ___ Veteran-owned Sb, ___ Service-disabled Veteran-owned Sb, ___ Hubzone Sb ___ Small Disadvantage Business, ___ Women-owned Sb or ___ Other Than Small Business buy Indian Act the Ihs Contracting Officer Will Give Priority For All Purchases, Regardless Of Dollar Value, By Utilizing Isbee Set-aside To The Maximum Extent Possible. Each Acquisition Of Supplies, Services Or Construction That Is Subject To Commercial Items (far 12.209) Or Simplified Acquisition Procedures (sap) (far 13.106) Must Be Set-aside Exclusively For Isbees. definition(s): Indian Economic Enterprise (iee) - Any Business Activity Owned By One Or More Indians, Federally Recognized Indian Tribes, Or Alaska Native Corporations Provided That: the Combined Indian, Federally Recognized Indian Tribe Or Alaska Native Corporation Ownership Of The Enterprise Constitutes Not Less Than 51%; the Indian, Federal Recognized Indian Tribes, Or Alaska Native Corporations Must, Together, Receive At Least 51% Of The Earnings From The Contract; And the Management And Daily Business Operations Must Be Controlled By One Or More Individuals Who Are Indians. definition: Indian Small Business Economic Enterprise (isbee) – An Iee That Is Also A Small Business Concern Established In Accordance With The Criteria And Size Standards Of 13 Cfr Part 121. the Government Will Evaluate Market Information To Ascertain Potential Market Capacity To Provide Supplies Consistent In Scope And Scale With Those Described In This Notice And Otherwise Anticipated. based On The Responses To This Sources Sought Notice/market Research, This Requirement May Be Set-aside For Isbee Or Small Business Or Procured Through Full And Open Competition, And A Single Award May Be Made. Telephone Inquiries Will Not Be Accepted Or Acknowledged, And No Feedback Or Evaluations Will Be Provided To Companies Regarding Their Submissions. submission Instructions: Interested Parties Who Consider Themselves Qualified To Perform The Above-listed Supplies Are Invited To Submit A Response To This Sources Sought Notice By January 20, 2025 3:00 Pm Mst. All Responses Under This Sources Sought Notice Must Be Emailed To Donovan.conley@ihs.gov And Reference Ihs1503544-ftym. all Interested Firms Who Can Meet The Requirements Stated Above Should Respond, In Writing, Including All The Following: 1. Company Name. 2. Point Of Contact (name/title/telephone Number/e-mail Address). 3. Fss / Sewp Contract Number, If Applicable. 4. Duns Number Or Sam Unique Entity Identifier Number. 5. Tax Id Number. 6. Indication Of Which Business Category (iee Or Isbee) For Which The Organization Qualifies. 7. A Capability Statement That Addresses The Organizations Qualifications And Ability To Provide The Requirement Depicted Above. 9. Documentation From Manufacturer (i.e., Correspondence From Manufacturer) Of Your Firm Being An Authorized Distributor For The Manufacturer. additionally, Since Ihs Must Conduct Sufficient Market Research In Determining If There Is Reasonable Expectation Of Obtaining Offers From Two Or More Indian Economic Enterprises (iee), For Every Commercial Contract Opportunity, In Accordance With Hhsar 326.603-1. to Identify And Support Responsible Iee/isbee(s) And Prevent Circumvention Or Abuse Of The Buy Indian Act, Interested, Qualified, Vendors Must Provide The Following: representation Must Be Made On The Designated Ihs Indian Economic Enterprise Representation Form (attached) Through Which The Offeror Will Self-certify Eligibility; And, identify The Federally Recognized Indian Tribe Or Alaska Native Corporation Upon Which The Offeror Relies For Its Iee Status. interested Firms Are Reminded That In Accordance With Far 4.12, Prospective Contractors Shall Complete Electronic Annual Representations And Certifications In Conjunction With Far 4.1102 Required To Be Registered In The Systems For Award Management (sam) At The Time An Offer Or Quotation Is Submitted In Order To Comply With The Annual Representations And Certifications Requirements. The Government Will Use Responses To This Notice To Make An Appropriate Acquisition Decision. This Is The Only Notice: No Other Copies Of This Notice Will Be Provided. if You Have Any Questions Concerning This Opportunity Please Contact: donovan Conley contract Specialist phoenix Area Office, Acquisition Department 40 North Central Ave 602-200-5374 attachment: 1. Ihs Indian Economic Enterprises Representatives Form 2. Brand Name Omnicell Justification

Details: This Is A Small Business Sources Sought Notice. This Is Not A Solicitation For Proposals, Proposal Abstracts, Or Quotations. the Purpose Of This Notice Is To Obtain Information Regarding: (1) The Availability And Capability Of Qualified Small Business Sources; (2) Whether They Are Small Businesses; Hubzone Small Businesses; Service-disabled, Veteran-owned Small Businesses; 8(a) Small Businesses; Veteran-owned Small Businesses; Woman-owned Small Businesses; Or Small Disadvantaged Businesses; (3) Their Size Classification Relative To The North American Industry Classification System (naics) Code For The Proposed Acquisition; And (4) Availability Of Domestic Sources Manufactured In The United States In Sufficient And Reasonably Available Commercial Quantities And Of A Satisfactory Quality. for Equipment/supply Requirements, Responses Must Include The Place Of Manufacturing (i.e. Address If Supply/equipment Is A Domestic End Product And Include Country Of Manufacture). For Equipment/supply Requirements, Small Businesses Must Also Address The Size Status Of The Manufacturer Under The Applicable Naics Code (i.e. Address Non-manufacturer Rule). your Responses To The Information Requested Will Assist The Government In Determining The Appropriate Acquisition Method, Including Whether A Set-aside Is Possible. An Organization That Is Not Considered A Small Business Under The Applicable Naics Code Should Not Submit A Response To This Notice. this Notice Is Issued To Help Determine The Availability Of Qualified Companies Technically Capable Of Meeting The Government Requirement And To Determine The Method Of Acquisition. It Is Not To Be Construed As A Commitment By The Government To Issue A Solicitation Or Ultimately Award A Contract. Responses Will Not Be Considered As Proposals Or Quotes. No Award Will Be Made As A Result Of This Notice. The Government Will Not Be Responsible For Any Costs Incurred By The Respondents To This Notice. This Notice Is Strictly For Research And Information Purposes Only. background: The National Institute On Aging (nia), Laboratory Of Neurogenetics (lng) Requires The Acquisition Of An Automated Cell Dissociation Apparatus For Single Nuclei Isolation From Human And Mouse Brain Tissues. purpose And Objectives: The National Institute On Aging, Laboratory Of Neurogenetics’ Objective Is To Elucidate The Pathological Basis Of Neurodegenerative Diseases, Specifically Amyotrophic Lateral Sclerosis (als), Parkinson's Disease, And Alzheimer's Disease. The Purpose Of Obtaining An Automated Cell Dissociation Apparatus Is For Single Nuclei Isolation From Frozen Human And Mouse Brain Tissue With The Goal Of Future Single Cell Snrna Sequencing. project Requirements: Please See Purchase Description Attached To This Posting. capability Statement /information Sought. companies That Believe They Possess The Capabilities To Provide The Required Products Should Submit Documentation Of Their Ability To Meet Each Of The Project Requirements To The Contracting Officer. The Capability Statement Must Specifically Address Each Of The Project Requirements Separately. Additionally, The Capability Statement Should Include 1) The Total Number Of Employees, 2) The Professional Qualifications Of Personnel As It Relates To The Requirements Outlined, 3) Any Contractor Gsa Schedule Contracts And/or Other Government-wide Acquisition Contracts (gwacs) By Which All Of The Requirements May Be Met, If Applicable, And 4) Any Other Information Considered Relevant To This Program. Capability Statements Must Also Include The Company Name, Unique Entity Id From Sam.gov, Physical Address, And Point Of Contact Information. The Response Must Include The Respondents’ Technical And Administrative Points Of Contact, Including Names, Titles, Addresses, Telephone And Fax Numbers, And E-mail Addresses. interested Companies Are Required To Identify Their Type Of Business, Applicable North American Industry Classification System (naics) Code, And Size Standards In Accordance With The Small Business Administration. The Government Requests That No Proprietary Or Confidential Business Data Be Submitted In Response To This Notice. However, Responses That Indicate The Information Therein Is Proprietary Will Be Properly Safeguarded For Government Use Only. Capability Statements Must Include The Name And Telephone Number Of A Point Of Contact Having Authority And Knowledge To Discuss Responses With Government Representatives. Capability Statements In Response To This Market Survey That Do Not Provide Sufficient Information For Evaluation Will Be Considered Non-responsive. When Submitting This Information, Please Reference The Solicitation Notice Number. one (1) Copy Of The Response Is Required And Must Be In Microsoft Word Or Adobe Pdf Format Using 11-point Or 12-point Font, 8-1/2” X 11” Paper Size, With 1” Top, Bottom, Left And Right Margins, And With Single Or Double Spacing. the Information Submitted Must Be In And Outline Format That Addresses Each Of The Elements Of The Project Requirement And In The Capability Statement /information Sought Paragraphs Stated Herein. A Cover Page And An Executive Summary May Be Included But Is Not Required. the Response Is Limited To Ten (10) Page Limit. The 10-page Limit Does Not Include The Cover Page, Executive Summary, Or References, If Requested. all Responses To This Notice Must Be Submitted Electronically To The Contract Specialist. Facsimile Responses Are Not Accepted. the Response Must Be Submitted To Rashiid Cummins, Contract Specialist, At E-mail Address Rashiid.cummins@nih.gov. the Response Must Be Received On Or Before January 17th, 2025, 3:00 Pm, Eastern Time. “disclaimer And Important Notes: This Notice Does Not Obligate The Government To Award A Contract Or Otherwise Pay For The Information Provided In Response. The Government Reserves The Right To Use Information Provided By Respondents For Any Purpose Deemed Necessary And Legally Appropriate. Any Organization Responding To This Notice Should Ensure That Its Response Is Complete And Sufficiently Detailed To Allow The Government To Determine The Organization’s Qualifications To Perform The Work. respondents Are Advised That The Government Is Under No Obligation To Acknowledge Receipt Of The Information Received Or Provide Feedback To Respondents With Respect To Any Information Submitted. After A Review Of The Responses Received, A Presolicitation Synopsis And Solicitation May Be Published In Www.sam.gov. However, Responses To This Notice Will Not Be Considered Adequate Responses To A Solicitation. confidentiality: No Proprietary, Classified, Confidential, Or Sensitive Information Should Be Included In Your Response. The Government Reserves The Right To Use Any Non-proprietary Technical Information In Any Resultant Solicitation(s).”

Details: Modification 2 – December 20, 2024: the Purpose Of This Modification Is To Update The Synopsis Entitled Human Health And Performance Contract 2 (hhpc2) Request For Proposal Notice Id 80jsc025r7001, Which Was Posted December 6, 2024. You Are Notified That The Following Changes Are Made To The Attachment Section: 80jsc025r7001 Amendment 1 Sf30 12.20.24 hhpc2 Rfp Questions And Answers A1 hhpc2 Rfp 80jsc025r7001 Amendment 1 j-2 Contract Data Requirements List A1 j-16 Standard Labor Categories (slcs) A1 l-2 Government Pricing Model (gpm) A1 l-6 Past Performance Matrix A1 l-9 Prime_subcontractor Identification And Sow Division Of Work Listing Worksheet A1 added L-10 Pre-award Survey Of Prospective Contractor Accounting System Checklist the Due Date For Responses Is Not Extended As A Result Of This Modification. please Continue To Monitor This Sam.gov Posting For Updates On The Release Of Any Documents, As Well As The Hhpc2 Website At Https://www.nasa.gov/johnson/jsc-procurement/hhpc2/. potential Offerors Are Responsible For Monitoring This Site For The Release Of Any Amendments To This Solicitation And For Downloading Their Own Copy Of The Solicitation And Amendments (if Any). modification 1 – December 9, 2024: the Purpose To This Modification Is To Update The Synopsis Entitled Human Health And Performance Contract 2 (hhpc2) Request For Proposal Notice Id 80jsc025r7001, Which Was Posted December 6, 2024. You Are Notified That The Following Changes Are Made To The Attachment Section: posted Hhpc2_pre-proposal_conf_12-12-24 the Due Date For Responses Is Not Extended As A Result Of This Modification. please Continue To Monitor This Sam.gov Posting For Updates On The Release Of Any Documents, As Well As The Hhpc2 Website At Https://www.nasa.gov/johnson/jsc-procurement/hhpc2/. potential Offerors Are Responsible For Monitoring This Site For The Release Of Any Amendments To This Solicitation And For Downloading Their Own Copy Of The Solicitation And Amendments (if Any). nasa/johnson Space Center Is Issuing A Final Request For Proposal (rfp) For The Human Health And Performance Contract 2 (hhpc2), 80jsc025r7001. You Are Notified Of The Following: the Entire Proposal Is Due By January 30, 2025 At 1:30 P.m. Central Time.proposal Volume Ii, Past Performance Is Requested Early, But Not Officially Due Until The Proposal Submittal Date. all Questions Regarding This Rfp Should Be Submitted In Writing, Electronically To Yaranet Marquez, Contracting Officer, At Yaranet.marquez-1@nasa.gov And Joseph Ocampo At Joseph.t.ocampo@nasa.gov On Or Before 1:30 P.m. Central Time On December 16, 2024. Offerors Are Encouraged To Submit Questions As Soon As Possible For Consideration.questions Shall Be Submitted Using The Template For Submission Of Comments In The “attachments” Section Below. the Rfp And Attachments Have Been Posted In The "attachments" Section Below. This Rfp And Associated Documents Supersede The Draft Rfp In Its Entirety. Any Additional Documents Will Be Available On Www.sam.gov. the Technical Library Is Available On Sam.gov Under Notice Id 80jsc024hhpc2a. if You Have Not Accessed The Technical Library Before, Please Complete The Technical Library Request Form And Refer To The Instructions Under Notice Id 80jsc024hhpc2a Prior To Submitting A Request Via Sam.gov. the Pre-proposal Conference For This Solicitation Is Anticipated To Be Held (virtual Only) Via Microsoft Teams On Thursday, December 12, 2024, Starting At 9:00 A.m. Central Time. Attendance At The Pre-proposal Conference Is Recommended; However, Attendance Is Neither Required Nor A Prerequisite For Proposal Submission. No Recordings Of Any Kind Are Permitted. Participation Is Limited To A Total Of Six (6) Individuals From Each Company/team. please Rsvp For The Pre-proposal Conference By Wednesday, December 11, 2024, 1:30 P.m. Central Time By Sending An Email To The Following Addresses: name:yaranet Marquez email:yaranet.marquez-1@nasa.gov name:joseph Ocampo email:joseph.t.ocampo@nasa.gov the Rsvp Email Must Include The Following: subject Line: Hhpc2 Rfp 80jsc025r7001 Pre-proposal Conference Rsvp full Company Name company Address sam Unique Entity Id And Commercial And Government Entity (cage) Code company Point Of Contact Name, Phone Number, And Email Address company Size/type (e.g., Large Business, Small Business, Women-owned Small Business, Etc.) names, Position Descriptions, And Email Addresses Of Attendees (no More Than Six (6) Individuals May Represent Any Party Or Team Of Parties) indication Of Your Company’s Desire To Be Added To The Interested Parties List, Which Will Be Publicly Available On The Hhpc2 Website. a Confirmation Email Will Be Sent To Acknowledge Your Reservation(s) And Provide Further Instructions. nasa Anticipates Releasing The Pre-proposal Conference Charts Prior To The Pre-proposal Conference. Please Continue To Monitor This Sam.gov Posting For Updates On The Release Of Any Documents, As Well As The Hhpc2 Website. nasa Far Supplement (nfs) Clause 1852.215-84, Ombudsman, Is Applicable. The Ombudsman For This Acquisition Is Donna M. Shafer, Donna.m.shafer@nasa.gov, 281-483-4258. it Is Theofferor's Responsibilityto Monitor This Website For Amendments To This Solicitation And Other Information. Potential Offerors Will Be Responsible For Downloading Their Own Copy Of The Solicitation And Amendments. prospective Offerors Are Encouraged To Notify The Contracting Officer Of Their Intent To Submit An Offer.

Description: Amc/amsc: 1g 1 Suitable For Competitive Acquisition. (see Notes 1 And 2) g The Government Has Unlimited Rights To The Technical Rights To The Technical Data, And The Data Package Is Complete. Valid Amcs: 1 And 2. drawings – item Name: Circuit Card Assembly rp001: Dla Packaging Requirements For Procurement rd002, Covered Defense Information Applies ra001: This Document Incorporates Technical And/or Quality Requirements (identified By An 'r' Or An 'i' Number) Set Forth In Full Text In The dla Master List Of Technical And Quality Requirements Found On The Web at: http://www.dla.mil/hq/acquisition/offers/eprocurement.aspx for Simplified Acquisitions, The Revision Of The Master In Effect On The solicitation Issue Date Or The Award Date Controls. For Large acquisitions, The Revision Of The Master In Effect On The Rfp Issue Date applies Unless A Solicitation Amendment Incorporates A Follow-on revision, In Which Case The Amendment Date Controls. rq009: Inspection And Acceptance At Origin rq011: Removal Of Government Identification From Non-accepted Supplies rq032: Export Control Of Technical Data this Item Has Technical Data Some Or All Of Which Is Subject To export-control Of Either The International Traffic In Arms Regulations (itar) Or The Export Administration Regulations (ear), And Cannot Be exported Without Prior Authorization From Either The Department Of State or The Department Of Commerce. Export Includes Disclosure Of Technical data To Foreign Persons And Nationals Whether Located In The United states Or Abroad. This Requirement Applies Equally To Foreign National employees And U.s. Companies And Their Foreign Subsidiaries. Dfars 252.225-7048 Is Applicable To This Data. the Defense Logistics Agency (dla) Limits Distribution Of Export-control technical Data To Dla Contractors That Have An Approved Us/canada Joint certification Program (jcp) Certification, Have Completed The introduction To Proper Handling Of Dod Export-controlled Technical Data training And The Dla Export-controlled Technical Data Questionnaire (both Are Available At The Web Address Given Below), And Have Been approved By The Dla Controlling Authority To Access The export-controlled Data. Instructions For Obtaining Access To The export-controlled Data Can Be Found At: https://www.dla.mil/logistics-operations/enhanced-validation/ to Be Eligible For Award, Offerors And Any Sources Of Supply Proposed for Use Are Required To Have An Approved Jcp Certification And Have been Approved By The Dla Controlling Authority To Access export-controlled Data Managed By Dla. Dla Will Not Delay Award In order For An Offeror Or Its Supplier To Apply For And Receive Approval by The Dla Controlling Authority To Access The Export-controlled Data. rq039: Non-tailored Higher-level Quality Requirements (sae As9100) For manufacturers And Non-manufacturers rt001: Measuring And Test Equipment part Name Assigned By Controlling Agency: Circuit Card Assembly, Phase shifter Driver Electro-static Sensitive Device mil-std-130n(1) Dated 16 Nov 2012. identification Marking Of U.s. Military Property mercury Or Mercury Containing Compounds Shall not Be Intentionally Added To<(>,<)> Or Come In Direct contact With<(>,<)> Any Hardware Or Supplies Furnished under This Contract. Exception: Functional Mercury used In Batteries, Fluorescent Lights, Required instruments; Sensors Or Controls; Weapon Systems; and Chemical Analysis Reagents Specified By Navsea. portable Fluorescent Lamps And Portable Instruments containing Mercury Shall Be Shock Proof And Contain a Second Boundary Of Containment Of The Mercury Or mercury Compound. (iaw Navsea 5100-003d). reference Control Part Number 7624570 Cage 53711 sampling: the Sampling Method Shall Be In Accordance With Mil-std-1916 Or Asq h1331, Table 1 Or A Comparable Zero Based Sampling Plan Unless Otherwise specified By The Contract. If The Applicable Drawing, Specification, standard, Or Quality Assurance Provision (qap) Specifies Critical, Major and/or Minor Attributes, They Shall Be Assigned Verificaiton Levels Of vii, Iv And Ii Or Aqls Of 0.1, 1.0 And 4.0 Respectively. Unspecified attributes Shall Be Considered As Major Unless Sampling Plans Are specified In Applicable Documents. For Mil-std-1916, The Manufacturer may Use The Attribute Or Variable Inspection Method At Their Option Or per The Contract. Mil-std-105/asq Z1.4 May Be Used To Set Sample Lot size, But Acceptance Would Be Zero Non-conformances In The Sample Lot unless Otherwise Specified In The Contract. overall Length: 5.740 Inches Nominal Overall Width: 1.619 Inches Nominal major Components: Connector Assy, Electrical (7624566-2/53711) 1; printed Wiring Board, Phase Shifter Driver, 1; No Keying Pins Special features: No Keying Pin; Model With Keying Pin Is 7624570-1. End Item identification: As-4108/spy Phased Array Antenna critical Application Item iaw Basic Drawing Nr 53711 7624570 revision Nr D Dtd 06/21/2011 part Piece Number: iaw Reference Drawing Nr 53711 7624570 revision Nr F Dtd 02/06/2009 part Piece Number: iaw Reference Drawing Nr 10001 2900594 revision Nr Ae Dtd 12/01/2014 part Piece Number: iaw Reference Drawing Nr 10001 3256939 revision Nr P Dtd 02/28/2013 part Piece Number: iaw Reference Drawing Nr 53711 7624560 revision Nr A Dtd 06/19/2013 part Piece Number: iaw Reference Drawing Nr 53711 7624561 revision Nr B Dtd 01/30/2018 part Piece Number: iaw Reference Drawing Nr 53711 7624562 revision Nr C Dtd 05/08/2019 part Piece Number: iaw Reference Drawing Nr 53711 7624563 revision Nr L Dtd 03/10/2017 part Piece Number: iaw Reference Drawing Nr 53711 7624565 revision Nr Dtd 09/22/2005 part Piece Number: iaw Reference Drawing Nr 53711 7624566 revision Nr G Dtd 02/21/2020 part Piece Number: iaw Reference Drawing Nr 53711 7624567 revision Nr A Dtd 01/15/2007 part Piece Number: iaw Reference Drawing Nr 53711 7624569 revision Nr C Dtd 08/19/2009 part Piece Number: iaw Reference Drawing Nr 53711 7624573 revision Nr D Dtd 10/17/2023 part Piece Number: iaw Reference Drawing Nr 53711 7624574 revision Nr B Dtd 09/07/2011 part Piece Number: iaw Reference Drawing Nr 53711 7624575 revision Nr C Dtd 06/25/2020 part Piece Number: iaw Reference Drawing Nr 53711 7624576 revision Nr D Dtd 11/07/2018 part Piece Number: iaw Reference Drawing Nr 53711 7624578 revision Nr A Dtd 05/15/2013 part Piece Number: iaw Reference Drawing Nr 53711 7624581 revision Nr Dtd 05/13/2004 part Piece Number: iaw Reference Drawing Nr 53711 7624583 revision Nr A Dtd 07/11/2016 part Piece Number: iaw Reference Drawing Nr 53711 7624590 revision Nr A Dtd 02/13/2018 part Piece Number: iaw Reference Drawing Nr 53711 7624591 revision Nr B Dtd 05/23/2017 part Piece Number: iaw Reference Drawing Nr 53711 7624592 revision Nr A Dtd 06/30/2008 part Piece Number: iaw Reference Drawing Nr 53711 7624593 revision Nr C Dtd 05/10/2018 part Piece Number: iaw Reference Drawing Nr 53711 7624596 revision Nr B Dtd 06/28/2013 part Piece Number: iaw Reference Drawing Nr 53711 7624597 revision Nr A Dtd 06/13/2006 part Piece Number: iaw Reference Drawing Nr 53711 7624598 revision Nr C Dtd 05/14/2020 part Piece Number: iaw Reference Drawing Nr 53711 7624599 revision Nr B Dtd 09/07/2011 part Piece Number: iaw Reference Drawing Nr 53711 7624600 revision Nr C Dtd 01/10/2018 part Piece Number: iaw Reference Drawing Nr 53711 7624602 revision Nr C Dtd 01/10/2013 part Piece Number: iaw Reference Drawing Nr 53711 7624603 revision Nr C Dtd 07/01/2010 part Piece Number: iaw Reference Drawing Nr 53711 7624604 revision Nr A Dtd 01/10/2013 part Piece Number: iaw Reference Drawing Nr 53711 7624605 revision Nr Dtd 09/22/2005 part Piece Number: iaw Reference Drawing Nr 53711 8306492 revision Nr B Dtd 08/21/2020 part Piece Number: iaw Reference Drawing Nr 10001 Ws10288 revision Nr Ab Dtd 04/05/2001 part Piece Number: iaw Reference Drawing Nr 10001 Ws10298 revision Nr Dtd 06/29/1983 part Piece Number: please Review The Nsn Listed Above And Provide Any Sources That May Be Able To Manufacture These Items. The Approved Sources For This Nsn Are Currently Listed Above. All Information May Be Submitted Directly To The Contract Specialist Listed Above. This Information Must Be Provided By The Response Date Indicated Above. in Order To Be Considered An Interested Party, Vendors Must Complete And Return The Attached Market Survey To The Contract Specialist Listed Above By The Required Response Date. note: This Project Contains Drawings/specifications. You May Access The Tdp Directly From Cfolders And Searching For The Above Cited Solicitation Number. you May Access Them Only Through The Following Link: Https://pcf1.bsm.dla.mil/cfolders. the Drawings Cannot Be Accessed Through Dibbs. thank You In Advance For Your Assistance.

Details: Description Request For Expression Of Interest Consulting Services For External Resettlement Monitoring Consultant For Integrated Flood Resilience And Adaptation 1 (infra 1) Project, Under Adb Financing (adb Loan No. 4345-phi) 1. The Government Of The Republic Of The Philippines - Department Of Public Works And Highway Has Applied For Financing From The Asian Development Bank Toward The Cost Of The External Resettlement Monitoring Consultant And Intends To Apply Part Of The Proceeds For The Services That Will Assist And Support The Dpwh In Executing And Implementing The Project’s Resettlement Plan. 2. The Department Of Public Works And Highways (dpwh) Is Requesting Expression Of Interests (eois) For: Project: Consulting Services For External Resettlement Monitoring Consultant For Integrated Flood Resilience And Adaptation 1 (infra 1) Project, Under Adb Financing (adb Loan No. 4345-phi) I. Consulting Services Consultant’s Services Will Be Required To Support The Dpwh Unified Project Management Office – Flood Control And Management Cluster (upmo-fcmc) In The Conduct Of External Assessment Of The Project’s Resettlement Plan To Be Implemented And In Order To Ensure That The Resettlement And Livelihood Rehabilitation Objectives Are Being Met Under Integrated Flood Resilience And Adaptation 1 (infra 1) Project. A Total Of 42 Person-months (pm) Of Inputs, For National Experts Will Be Engaged. Dpwh Will Select A Consulting Firm Following Quality-and -cost Based Selection (qcbs) Process (80:20 Ratio) In Accordance With Adb Procurement Policy 2017 And The Procurement Regulations For Adb Borrowers 2017 (as Amended From Time To Time). The Consultant’s Services Will Be Financed By The Adb And The Government. The Dpwh Will Be The Executing And Implementing Agency (ea/ia). During The Services, The Consultant Will Report To Dpwh Through The Upmo-fcmc. Ii. Key Objectives The Key Objectives Of The External Resettlement Monitoring Consultant Are As Follows: A. To Review Internal Monitoring Report And Verify Internal Monitoring Information; B. To Verify Whether The Overall Resettlement Objectives Are Being Met In Accordance With The Rp/ripp/regdp, And If Not, To Suggest Corrective Measures; C. To Assess The Extent To Which Implementation Of The Rp/ripp/regdp Complies With Adb’s Safeguard Policy Statement (sps); D. To Identify Problems Or Potential Risks/hazards; E. To Identify Methods Of Responding Immediately To Mitigate Problems And Advise The Dpwh Accordingly; And F. To Verify If The Livelihoods And The Standard Of Living Of Affected Persons (aps), Including Those Of The Non-titled Displaced Persons, Are Restored And/or Improved. Iii. Implementation Period External Monitoring Activities Will Be Carried Out For A Period Of 5 Years On A Semi-annual Basis Starting From The Conduct Of Detailed Measurement Survey Until The Completion Of Livelihood/income Restoration Activities. For Project Components Where Payment Of Compensation/allowances Has Been Substantially Completed, The External Expert Will Also Conduct A Resettlement Audit To Verify Completion Of Payment Of Compensation/allowances And Hand-over Of Plots. The External Monitoring And Evaluation Experts/qualified Ngos Will Be Composed Of One Team Leader With Extensive Experience In Monitoring And Evaluation Of Resettlement Activities In The Country With Strong Ability In Preparing Resettlement Reports. The Team Leader Will Be Assisted By At Least 3 Specialists (one For Each River Basin) With Expertise On Land Acquisition/resettlement And Social Development, Monitoring And Research Methodology, And Assets Valuation. The Payments Under This Service Shall Be Made In Lump Sum Installments Against Deliverables. The Payments Will Be Made According To The Payment Schedule Stated In The Terms Of Reference (tor). 3. Interested Consultants Should Register On The Adb Consultant Management System (cms) Where The Consulting Services Recruitment Notice (csrn) For This Project Can Be Found. In The Csrn, The Consultants Shall Accomplish The Eoi Template By Providing The Required Information And Submit To Adb Cms On Or Before January 23, 2025 Until 11:59 P.m. (philippine Time). Relevant Information Pertaining To The Services Will Be Available In The Csrn. 4. Interested Consultants Should Provide Information Demonstrating That They Have The Required Qualifications And Relevant Experience To Perform The Services. Consultants May Associate With Other Firms To Enhance Their Qualifications But Should Indicate Clearly Whether The Association Is In The Form Of A Joint Venture And/or A Sub-consultancy. In The Case Of A Joint Venture, All The Partners In The Joint Venture Shall Be Jointly And Severally Liable For The Entire Contract, If Selected. 5. The Bids And Awards Committee For Consulting Services (baccs) Shall Draw Up The Shortlist Of Consultants From Those Who Submitted The Expression Of Interest (eoi) On The Prescribed Deadline To Adb Cms. The Shortlist Shall Consist Of Six (6) Consulting Firms Who Will Be Invited To Submit Their Proposals. The Shortlisting Evaluation Criteria And Rating Systems Are: I) Technical Competence - 60% (must Demonstrate That The Firm Has Previous Experience Undertaking Similar Projects Involving Project Management, Construction Supervision With Capacity Building Of Any Infrastructure Projects In The Last Ten (10) Years); Ii) Geographical Experience - 20% (must Demonstrate Experience In The Philippines Or Any Country In Southeast Asia); And Iii) Management Competence - 20% (must Demonstrate That The Firm Has Quality Control And Assurance System In Place And Project Management Coordination In Undertaking Similar Consultancy Services). 6. The Dpwh Reserves The Right To Reject Any Or All Bids, Annul The Bidding Process, Or Not Award The Contract At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 7. For Further Information, Interested Consultants May Contact The Following Contact Person During Office Hours (7:00 A.m. To 4:00 P.m.) Point Of Contact: Eric A. Ayapana Undersecretary For Operations In Charge Of Convergence Projects Chairman, Bac For Consulting Services 2nd Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila Telephone No.: (+632) 5-304-2925 / (+632) 5-304-3023 Email Address: Ayapana.eric@dpwh.gov.ph Obja-an.mary_grace@dpwh.gov.ph Approved By: Eric A. Ayapana Undersecretary For Operations In Charge Of Convergence Projects Chairman, Bac For Consulting Services Date Of Advertisement: December 20, 2024

Details: This Is A Small Business Sources Sought Notice. This Is Not A Solicitation For Proposals, Proposal Abstracts, Or Quotations. the Purpose Of This Notice Is To Obtain Information Regarding: (1) The Availability And Capability Of Qualified Small Business Sources; (2) Whether They Are Small Businesses; Hubzone Small Businesses; Service-disabled, Veteran-owned Small Businesses; 8(a) Small Businesses; Veteran-owned Small Businesses; Woman-owned Small Businesses; Or Small Disadvantaged Businesses; And (3) Their Size Classification Relative To The North American Industry Classification System (naics) Code For The Proposed Acquisition. your Responses To The Information Requested Will Assist The Government In Determining The Appropriate Acquisition Method, Including Whether A Set-aside Is Possible. An Organization That Is Not Considered A Small Business Under The Applicable Naics Code Should Not Submit A Response To This Notice. this Notice Is Issued To Help Determine The Availability Of Qualified Companies Technically Capable Of Meeting The Government Requirement And To Determine The Method Of Acquisition. It Is Not To Be Construed As A Commitment By The Government To Issue A Solicitation Or Ultimately Award A Contract. Responses Will Not Be Considered As Proposals Or Quotes. No Award Will Be Made As A Result Of This Notice. The Government Will Not Be Responsible For Any Costs Incurred By The Respondents To This Notice. This Notice Is Strictly For Research And Information Purposes Only. background: The National Institute On Aging (nia) Requires The Acquisition Of Mass Spectrometry Reagents For Mass Spectrometry-based Proteomics, Peptidomics, Lipidomics And Metabolomics To Understand The Underlying Biology Of Alzheimer’s Disease And Related Dementias. purpose And Objectives: The Nia’s Objective Is To Create A National Resource Of Isogenic Sets Of Alzheimer’s Disease And Related Dementias Mutation Ipsc Lines, Complimented By Foundational Phenotypic Datasets From Differentiated Disease-relevant Cells Derived From These Lines. The Nia Anticipates That This Resource Will Substantially Accelerate The Pace Of Mechanistic Discovery Regarding How Alzheimer’s Disease And Related Dementia Mutations Cause Disease. project Requirements: Please See The Purchase Description Attached To This Posting. anticipated Delivery Dates: base Quantity: July 7, 2025 optional 1 Quantity: July 7, 2026 optional 2 Quantity: July 7, 2027 capability Statement /information Sought. small Business Concerns That Believe They Possess The Capabilities To Provide The Required Services Should Submit Documentation Of Their Ability To Meet Each Of The Project Requirements To The Contracting Officer. The Capability Statement Must Specifically Address Each Of The Project Requirements Separately. Additionally, The Capability Statement Should Include 1) The Total Number Of Employees, 2) The Professional Qualifications Of Personnel As It Relates To The Requirements Outlined, 3) Any Contractor Gsa Schedule Contracts And/or Other Government-wide Acquisition Contracts (gwacs) By Which All Of The Requirements May Be Met, If Applicable, And 4) Any Other Information Considered Relevant To This Program. Small Businesses Must Also Provide Their Company Name, Unique Entity Id Number From Sam.gov, Physical Address, And Point Of Contact Information. interested Small Businesses Are Required To Identify Their Type Of Business, Applicable North American Industry Classification System (naics) Code, And Size Standards In Accordance With The Small Business Administration. The Government Requests That No Proprietary Or Confidential Business Data Be Submitted In A Response To This Notice. However, Responses That Indicate The Information Therein Is Proprietary Will Be Properly Safeguarded For Government Use Only. Capability Statements Must Include The Name And Telephone Number Of A Point Of Contact Having Authority And Knowledge To Discuss Responses With Government Representatives. Capability Statements In Response To This Market Survey That Do Not Provide Sufficient Information For Evaluation Will Be Considered Non-responsive. When Submitting This Information, Please Reference The Solicitation Notice Number. the Respondent Must Also Provide Their Unique Entity Id Number From Sam.gov, Organization Name, Address, Point Of Contact, And Size And Type Of Business (e.g., 8(a), Hubzone, Etc., Pursuant To The Applicable Naics Code And Any Other Information That May Be Helpful In Developing Or Finalizing The Acquisition Requirements. one (1) Copy Of The Response Is Required And Must Be In Microsoft Word Or Adobe Pdf Format Using 11-point Or 12-point Font, 8-1/2” X 11” Paper Size, With 1” Top, Bottom, Left And Right Margins, And With Single Or Double Spacing. the Information Submitted Must Be In And Outline Format That Addresses Each Of The Elements Of The Project Requirement And In The Capability Statement /information Sought Paragraphs Stated Herein. A Cover Page And An Executive Summary May Be Included But Is Not Required. the Response Is Limited To Ten (10) Page Limit. The 10-page Limit Does Not Include The Cover Page, Executive Summary, Or References, If Requested. the Response Must Include The Respondents’ Technical And Administrative Points Of Contact, Including Names, Titles, Addresses, Telephone And Fax Numbers, And E-mail Addresses. all Responses To This Notice Must Be Submitted Electronically To The Contract Specialist And Contracting Officer. Facsimile Responses Are Not Accepted. the Response Must Be Submitted To Rashiid Cummins, Contract Specialist, At E-mail Address Rashiid.cummins@nih.gov the Response Must Be Received On Or Before January 21st, 2025, 3:00 Pm, Eastern Time. “disclaimer And Important Notes: This Notice Does Not Obligate The Government To Award A Contract Or Otherwise Pay For The Information Provided In Response. The Government Reserves The Right To Use Information Provided By Respondents For Any Purpose Deemed Necessary And Legally Appropriate. Any Organization Responding To This Notice Should Ensure That Its Response Is Complete And Sufficiently Detailed To Allow The Government To Determine The Organization’s Qualifications To Perform The Work. respondents Are Advised That The Government Is Under No Obligation To Acknowledge Receipt Of The Information Received Or Provide Feedback To Respondents With Respect To Any Information Submitted. After A Review Of The Responses Received, A Presolicitation Synopsis And Solicitation May Be Published In Federal Business Opportunities. However, Responses To This Notice Will Not Be Considered Adequate Responses To A Solicitation. confidentiality: No Proprietary, Classified, Confidential, Or Sensitive Information Should Be Included In Your Response. The Government Reserves The Right To Use Any Non-proprietary Technical Information In Any Resultant Solicitation(s).”

Details: Sources Sought Notice u.s. Army Corps Of Engineers, Philadelphia District fy 24 Preventative Maintenance On And Repairs To Caterpillar, Volvo And John Deere Equipment And Engines response Date: 14 November 2024 place(s) Of Performance: Listed Herein. description: Preventative Maintenance On And Repairs To Caterpillar, Volvo And John Deere Equipment And Engines. this Is A Sources Sought Notice And Is For Information & Market Research Purposes Only. This Is Not A Request For Proposals, Quotations, Or Bids. No Solicitation Is Currently Available. Responses To This Request Will Not Be Returned. Not Responding To This Sources Sought Notice Does Not Preclude Participation In Any Future And Potential Solicitation. it Is The Intent Of The Usace Philadelphia To Use This Information For Market Research Purposes Only. The Survey Is Being Conducted To Determine The Interest Of Industry Within Naics Code 811310 And To Establish That There Are Adequate Large And/or Small Business Contractors For Providing The Marine Work Described Below. The Government Will Not Pay For The Provision Of Any Information, Nor Will It Compensate Any Respondents For The Development Of Any Such Information. If A Formal Solicitation Is Released, It Will Be Via System For Award Management (sam.gov). principal Characteristics Of The Scope Of Work: the Contractor Shall Perform Preventative Maintenance On And Repairs To The Following Pieces Of Heavy Equipment And Engines. See Atrtached Pdf For Table Below. equipment plant serial Number cat 330f Excavator 0429 Mbx20502 cat 330d Excavator 0424 emwp02747 volvo Ec300 Excavator 0427 310672 volvo Ec300 Excavator 0428 311270 cat 325d Pontoon Excavator Slr 1129 a3r0419 cat 329e Pontoon Excavator 1130 k2l00144 cat 329f Pontoon Excavator Slr 0426 erl90001 cat 330f Pontoon Excavator Slr 0430 mbx20587 cat 330f Pontoon Excavator Slr 0431 mbx20590 cat D6t Dozer 1137 kjl01176 cat D6t Dozer 1138 zjb00263 cat D6t Dozer 1139 zjb01137 cat D6t Dozer 1140 htz00347 cat D6t Dozer 1141 kew00411 cat D6t Dozer 1142 kew00411 cat 928f Rub Tire Wheel Loader 1606 98z04813 cat 130g Grader 1607 74v02441 cat 416f Backhoe 1611 ksf01360 john Deere 250ii Art Dump 1612 dw250dxhfe667051 jcb 640 Wheel Loader 1615 3285870 volvo A25 Hauler Articulated Dump 1614 342184 120m Motor Grader cat120mcb9n00270 d6t Cat Dozer cat00d6tewcg00577 d6t Cat Dozer cwcg00578 330 Fl Excavator cmbx10082 450 Backhoe lebl00413 cat 938h cmjc01369 new Holland Boom Ts115a acp277204 gradall Xl5100 Sv 5140000102 international Durastar 4400 1htmktar2hh5939953 cherneski Vessel c1j00353, C1j00287 h.r. Spies Vessel jle05407, Jle05411 the Heavy Equipment And Engines Listed Herein Requires Certain Types Of Preventative Maintenance (pm), Which Includes, But Is Not Limited To, Submitting Fluid Samples For Testing, Providing A List All Pms To Be Accomplished Prior To Work Starting And Identifying Additional Repairs Required. the Contractor Shall Be Capable Of Performing And Completing Both Emergency And Non-emergency Repairs To The Same Equipment And Engines. this Is An Idiq Contract, With Annual Periods Of Performance (pop) To Run From (approximately) 21 April Through 20 April Each Year, With The Last Pop Ending On (approximately) 20 April 2030. the Equipment And The Vessels Are Located At The Following Locations. The Contractor Shall Be Capable Of Performing The Pm And Repairs At All Locations. fort Mifflin 6400 Hog Island Rd Philadelphia, Pa 19153 pedricktown blg. 613 Artillery Rd Rt 130 pedricktown, Nj 08067 fort Mott/killcohook 454 Fort Mott Rd Or 37 Lehigh Rd pennsville, Nj 08070 wilmington South 903 Lambson Lane new Castle, De 19720 artificial Island hope Creek Rd hancock’s Bridge, Nj 08038 penns Neck 90 Heron Ave pennsville, Nj 08070 chesapeake City 815 Bethel Rd chesapeake City, Md 21915 cape May higbee Beach Wildlife Management Area 643 County Road cape May, Nj 08204 oldmans 191 N Railroad Ave pedricktown, Nj 08067 all Interested Business Concerns For This Requirement Must Submit The Following Via A Pdf Document: company Name. uei cage Code. type Of Business Concern (small Business, Large Business, Etc.). years In Business. statement Of Capability And Qualifications Of The Organization To Perform The Required Work. list Of Similar Projects Worked On Over The Past 5 Years And Services Provided On Those Projects. the North American Classification System (naics) Code For This Acquisition Is 811310. ** Each Submission Should Not Exceed 5 Pages Total** notice To Potential Contractors: All Offerors Who Provide Goods Or Services To The Federal Government Must Be Registered In The System For Award Management (sam) Located On The Website: Https://sam.gov/. responses Should Be Submitted Electronically Via E-mail To: tiffany Chisholm contract Specialist e-mail: Tiffany.z.chisholm@usace.army.mil office Phone: (215) 656-6761 all Responses Shall Be Received On Or Before 14 November 2024 By 5pm Est.

Details: Description Request For Quotation Date: ______________ Rfq No. 2024-up-48 _____________________________ _____________________________ _____________________________ _____________________________ (company Name & Address) Sir/madam: The Philippine International Convention Center, Through Its Bids And Awards Committee, Intends To Procure Supply And Installation Of Cctv Cables At The New Cashiers Booth (fiber Structured Cabling), With An Approved Budget For Contract (abc) Of Ninety Thousand Pesos (₱90,000.00), Vat Inclusive, Which Will Be Undertaken In Accordance With Section 53.9 Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184. Please Quote Your Best Offer For The Service/s Described Herein, Subject To The Terms Of Reference Provided For This Rfq. Submit Your Quotation/offer Duly Signed By You Or Your Duly Authorized Representative Not Later Than 3:00 P.m. Of ________________. A Copy Of The Following Are Required To Be Submitted Along With Your Quotation/offer: A. 2025 Mayor’s/business Permit; B. Bir Registration Certificate; C. Philgeps Registration Number; D. Omnibus Sworn Statement; And E. Copy Of The Terms Of Reference Duly Signed On All Pages. Open Quotations May Be Submitted Manually Or Email At The Address And Contact Numbers Indicated Below. For Any Clarifications, You May Contact Ms. Carreen M. Mangaya At Telephone No. (02) 8789-4761 Or Email Address At Cmmangaya@picc.gov.ph Kristine Angelica E. Agujo Head, Bac Secretariat/ Procurement Unit Rfq No. 2024-up-48 Terms Of Reference I. Project Title: Supply And Installation Of Cctv Cables At The New Cashiers Booth (fiber Structured Cabling). Ii. Approved Budget For Contract (abc): Ninety Thousand Pesos (₱ 90,000.00), Vat Inclusive. Iii. Description Of The Project: The Project Involves The Installation Of Cctv Cabling At The Newly Constructed Cashiers Booth To Enhance Security And Monitoring Capabilities. This Will Ensure A Safe Environment For Both Staff And Customers. Iv. Scope Of Works/services: • Site Survey: O Conduct A Comprehensive Assessment Of The New Cashiers Booth And Surrounding Areas. • Cable Installation/services: O Install Cables Securely Along Predetermined Paths, Utilizing Cable Trays Or Conduits As Needed. O Installation Of 1 Fiber Optics Backbone (4 Core) From Treasury Office To New Cashier Booth Idf. O Installation Of Data Rack, Connector. Patch Panel And Consumables O Labor And Mobilization. • Connection Set-up: O Connect Cables To Cctv Cameras And The Monitoring System. O Verify That All Connections Are Secure And Properly Terminated. • System Testing: O Conduct Thorough Testing Of All Installed Cameras And Connections. O Verify Video Quality, Clarity And Coverage Area. • Installation Report: O Provide Detailed Documentation, Including Cable Layouts And Camera Locations. V. Company Background And Experience: • Must Have At Least Eight (8) Years Track Record In The Installation And Implementation Of Network Fiber Optics, Cat6 Cable With Cctv Configuration And Management. • Must Have Three (3) Certified Product Engineer Personnel Of The Company. • Must Have At Least One (1) Certified Fiber And Copper Technician. Vi. Schedule Of Requirements: • Contractor Shall Complete The Project Within Twenty (20) Calendar Days. Vii. Terms Of Payment: • Full Payment Shall Be Processed Twenty (20) Working Days From The Receipt Of Invoice, Subject To The Usual Accounting And Auditing Rules And Regulations Of The Picc. • The Contractor Must Submit The Following Prior To The Processing Of The Payment. • Sales Invoice • As Built Plan • Photos Of The Completed Project Viii. Waranty And Support: • The Warranty Period Is One (1) Year After Acceptance By The Picc Authorized Representative Of The Project. Ix. General Conditions Of The Contract 1. All Prices Quoted Herein Are Valid, Binding And Effective For One Hundred Twenty (120) Calendar Days From Date Of Quotation. 2. The Contractor Shall Be Responsible For The Source(s) Of His Services/equipment Shall Make Deliveries In Accordance With Schedule, Quality And Specifications. Failure By The Awardee To Comply With The Same Shall Be Ground For Cancellation Of The Award. 3. The Contractor Shall Pick Up Rs And Ntp Issued In His Favor Within Three (3) Days After Receipt Of Notice To That Effect. A Telephone Call, Fax Transmission Or Email Shall Constitute An Official Notice To The Awardee. Thereafter, If The Rs Remain Unclaimed, The Said Rs Shall Be Sent By Messengerial Service To The Awardee At The Latter’s Expense. To Avoid Delay In The Service Of The Requesting Agency’s Requirement, All Defaulting Awardees Shall Be Precluded From Proposing Or Submitting A Substitute Sample. 4. Subject To The Provisions Of The Preceding Paragraph, Where Awardee Has Accepted A Ntp But Fails To Deliver The Services Within The Time Called For In The Same Order, He Shall Be Extended A Maximum Of Fifteen (15) Calendar Days Under Liquidated Damages To Make Good His Services. Thereafter If Awardee Has Not Completed Delivery Of Services Within The Extended Period, The Subject Rs & Ntp Shall Be Cancelled And The Award For The Undelivered Balance Withdrawn From That Awardee. The Picc-bac Shall Then Purchase The Required Services From Such Other Source(s) As It May Determine, With The Difference In Price To Be Charged Against The Defaulting Awardee. Refusal By The Defaulting Awardee To Shoulder The Price Difference Shall Be Ground For His Disqualification From Future Bids Of The Same Or All Items, Without Prejudice To The Imposition Of Other Sanctions As Prescribed Under Ra 9184 And Its Irr-a. 5. All Services By The Contractor Shall Be Subject To Inspection And Acceptance By The Picc. 6. A Penalty Of One Tenth (1/10) Of One Percent (1%) Of The Total Value Of Services/works Shall Be Deducted For Each Day Of Delay Including Sundays And Holidays In The Delivery Of The Services. 7. All Transactions Are Subject To Withholding Of Creditable Value Added Tax (vat) Per Revenue Regulation No. 10-93.