Pumps Tenders

Details: Copper Bottle Lugs Size 16 Sq Mm , 16 Sq Mm Copper reducer Terminal Crimping Type , 25 Mm Sq Pin Type copper Lugs , Lugs Copper, 16mm Sq Pin Type , Copper lugs 25 Sqmm , Copper Lugs, Type-ring, Size35mmsq,hole Dia-12mm , Copper Ring Type Lug 35 Sq mm , Lug Ring Type 25sqmm , 35 Mm Sq Pin Type Copper lugs , Copper Lug Ring Type Size 95 Sq Mm , Copper lugs 120 Sq Mm Copper Tubular Heavy Duty Type terminal Skts Ring Type H By D , Copper Lugs 150 Sq mm , 95 Mm Sq 12 Mm Hole Dia Ring Type Copper Lugs , copper Lugs, Type-ring, Size-35mmsq, Hole Dia-10mm , lugs Long Pump Cu Lugs Size 70mm Heavy Duty tubular Terminal End, Sh 10 Point 2 Mm,crimpi Ng barrel28mm , 50 Mm Sq,10mm Hole Dia Ring Type Copper lugs , Lugs Heavy Duty Crimping Type Cu Lugs 50m2 hole Dia 16 Point 2 Tongue Type, Palm-32 Mm , Ring type Cu Lugs Size 70mm2 Copper Lug, Size 70 Sq Mm tongue Type, Sh16 Point 2mm, Crimpi Ng Barrel18mm , heavy Duty Ring Tongue Type Copper Lugs 50 Sq Mm stud Hole 12point7 M Copper Lug, Size 50 Sq Mm Palm24mm,crimping Barrel-16mm , 50 Sq. Mm Heavy Duty copper In-line Connector Confirming To Bs 1977 Or Is 1897 , Aluminium Straight Through Ferrule In-line Connector 185 sq Mm , Aluminium Straight Through Ferrule In-line connector 25 Sq Mm , Copper Lugs 300 Sq Mm , Copper lugs 240 Sq Mm , Aluminium Straight Through Ferrule In-line connector 150 Sq Mm , Copper Straight Through Ferrule Inline Connector 25.0 Sq.mm , Aluminium Straight Through ferrule In-line Connector 95 Sq Mm , Lugs Copper crimping Type 300sq Mm Heavy Duty Copper Lug Size 300 Sq Mm Single Hole Standard Barrel Tubular terminal End, Sh-16point2mm,crimping Barrel-54mm. , aluminium Lug 120 Sq Mm Bolt Dia M12 , Aluminium straight Through Ferrule In-line Connector 35 Sqbmm , Lugs cupper Crimping Type 150 Sqmm , Aluminium Straight through Ferrule In-line Connector 50 Sq Mm , Aluminium lugs 95 Mm Crimpring Type , Aluminium Lugs, Typetubular Heavy Duty, Size-300mm Sq.,hole Dia20mm , aluminium Straight Through Ferrule In-line Connector 120 Sq mm , Aluminium Lug, Heavy Duty, Tubular Type, 150 Sq. mm. , Aluminium Lugs, Type-tubular Heavy Duty, Size70mm Sq.,hole Dia12mm , Copper Straight Through Ferrule in-lineconnector 35 Sq Mm , Aluminium Lugs, Type-tubular heavy Duty, Size-240mm Sq.,hole Dia16mm , Alumin

Details: Description 1. Cement (203 Bags) 2. Sand (18.5 Cu.m.) 3. Gravel (23 Cu.m.) 4. 10mm Dia X Gm Rsb (135 Pcs) 5. 12mm Dia X Gm Rsb (136 Pcs) 6. #16 G.i. Tie Wire (43 Kg) 7. 2"x6"x16' Coco Lumber (40 Pcs) 8. 2"x3"x16' Coco Lumber (70 Pcs) 9. 2"x4"xl6' Good Lumber (3 Pcs) 10. 2"x3"x16' Good Lumber (4 Pcs) 11. L/2"thk, Ordinary Plywood (16 Shts) 12. 4"thk Chb (565 Pcs) 13. Asstd. Cw Nails (10 Kgs) 14. 1/4"x2"x2"x16' Angle Bar (10 Pcs) 15. Welding Rod (5 Kg) 16. G.i. Pipe 3" Dia X 20' Sched 40 (5 Pcs) 17. G.i. Pipe 1" Dia X 20' Sched 40 (8 Pcs) 18. Coupling 3" Dia (4 Pcs) 19. Coupling 1" Dia (7 Pcs) 20. Electric Motor Pump 1 Hp (1 Unit) 21. Teflon Tape (12 Pcs) 22. 1" Dia Union Coupling Plastic Compression Fitting (2 Pcs) 23. Water Tank 2000l (1 Unit) 24. Apc Control (1 Pcs) 25. Pvc Solvent (6 Cans) 26. Float Control (1 Pcs) 27. Pvc Pipe 3/4" Dia X 3m (60 Pcs) 28. Pvc Pipe 1/2" Dia X 3m (45 Pcs) 29. Pvc Coupling Reducer (12 Pcs) 30. Pvc Elbow (18 Pcs) 31. Teflon Tape (6 Pcs) 32. Float Valve (1 Pcs) 33. 16mm Dia Rsb (18 Pcs) 34. Square Bar 12mm (12 Pcs) 35. 1/2" Thk Ordinary Plywood (8 Shts) 36. Epoxy Primer (2 Gal) 37. Paint Brush (2 Pcs) 38. Welding Rod (4 Kgs) 39. G.i. Sheet Roofing (1 Shts) 40. Roofing Nails (1 Kg) 41. Pdx Wire #12 (4 Box) 42. Circuit Breaker Plug In 20a (1 Pcs) 43. Safety Breaker (main) W/ Box 20a (1 Pcs) 44. Wire Clip (#2.0) (60 Pcs) 45. Screw 1" (60 Pcs) 46. Electrical Tape (big) (4 Pcs) 47. Plastic Moulding 3/4 (5 Pcs) 48. Thhn #6 (14mm') (66 Meters) 49. Service Drop (58 Meters) 50. Meter Box (1 Unit) 51. Meter (1 Unit) Equipment Rentals: 52. 1 Unit Backhoe (0.80 Cu.m.) (2 Days) 53. 1 Unit Welding Machine (13 Days) 54. 1 Unit Deep Well Draining Equipment (8 Days) 55. 1 Unit Rotary Hammer Drill/ Clipping Gun (12 Days) 56. Labor Atty. Michael E. Costelo, Jr., Rme Cgdh 1/ Head Bac Secretariat Mobile No. 0917 168 9211

Details: Description Republic Of The Philippines Casd Government Of Ormoc City P.r. No.: 242779 Bids And Awards Committee Quotation No.: 245461-3021 Ormoc City Philgeps No.: Standard Form Title: Request For Quotation Please Quote Your Lowest Price On The Item/s Listed Below, Subject To The General Conditions On The Last Page, Stating The Shortest Time Of Delivery And Submit Your Quotation Duly Signed By You Or Your Authorized Representative Not Later Than _______ _______________________. (sgd) Katheryn A. Solaña Procurement Officer Note: (1) All Entries Must Be Typewritten Or Legibly Written. Of Acceptance By The End-user. (4) Price Validity Shall Be For A Period Of (2) Delivery Period Within 20 C.d. Upon Receipt Of The Sixty (60) Days. (5) G-eps Reg No., Mayors Permit, Dti/sec, And For Abc's Above Approved Funded Purchase Order (p.o.). Administrative 500k - Itr & Omnibus Sworn Statement Shall Be Attached Upon Submission Penalties Pursuant To Sec. 69 Of The Revised Irr-ra 9184 Shall (6) Bidders Shall Submit Original Brochures Showing Certifications Of Be For A Minimum For Non-delivery Without Valid Reason. The Products If Applicable. (7) The Approved Budget Ceiling For This (3) Warranty Shall Be For A Period Of Three (3) Months Of Procurement Is (amount Indicated Below) Supplies & Materials, One (1) Year For Equipment, From Date Php 100,000.00 Activities Schedule From To 1 Issuance Of Canvass Thursday November 21, 2024 Tuesday November 26, 2024 2 Submission Of Canvass Wednesday November 27, 2024 10:00 Am 3 Opening Of Canvass Wednesday November 27, 2024 2:00 Pm # Item And Description Qty Unit Cost Total 1 Marine Engine (lot) 2 Lot Specifications: Marine Engine: 16 Hp, Low Speed Features: For Marine Use, High Torque And Power, Fuel Efficiency Easy To Assemble And Easy To Start Type 4 Stroke, Ohv, Single Cylinder, Inclined 25" Displacement 389 Cm3 (23.7 Cu In),bore X Stroke 88x64mm(3.5x2.5in) Maximum Net Torque 26.9 N-m(2.74 Kgf-m)2.74kgf-m,19.8lbf-ft @ 3000 Rpm, Compression Ratio 8.2:1 Fuel Consumption (at Continuous Rated Power) *1 4.7 Liters (1.24 Us Gal, 1.03 (mp Gal)/h Ignition System Transistorized Magneto Lubrication System Forced Splash Oil Capacity 1.1 Liter (1.16 Us Qt,0.97 Lmp Qt) Starting System Recoil Starter Air Cleanergrid Type Governor Mechanical Centrifugal Fuel Used Gasoline With Pump Octane Rating Of 86 Or Higher Fuel Tank Capacity 6.1 Liters (1.61 Us Gal, 1.34 Lmp Gal) With Warranty -x-x-x-x-x-x-x- Nothing Follows -x-x-x-x-x-x-x- Grand Total >>> * Brand And Model : Warranty : Delivery Period : Price Validity : After Having Carefully Read And Accepted Your Conditions, I/we Quote You On The Item At Prices Noted Above And Hereby Commit To Deliver The Same If Adjudged To Have The Lowest And Responsive Quotation. Business Name 2024-11-242779 Printed Name/signature/date

Details: Description Invitation For Submission Of Quotation (shopping) Tools Tire Pressure Gauge, Analog 1 Pc Fender Cover 1 Set Shift Knob Cover 1 Pc Floor Mat Cover 4 Pc Mechanical Plier 10in 5 Pc Long Nose Plier 10in 5 Pc Combination Plier 10in 5 Pc Screwdriver 2 Set Belt Tension Gauge 3 Pc Spark Plug Wrench 3 Pc Oil Filter Wrench (cap Type) With Box 3 Set Spark Plug Gauge, Coin Type 3 Pc Spark Plug Cleaner, Pneumatic 3 Pc Ball Peen Hammer 5 Pc Spanner, Combination 5 Set Tool Caddy, 7 Drawers With Common Tools 3 Unit Oil Bucket 3 Pc Box Wrench 3 Set Open End Wrench 3 Set Tire Wrench 4 Set "torque Wrench 10- 50 N-m (100-500 Kgf-cm, 1-5 Kgf-cm, 7-36 Ft-lb.) Range, Click Type" 2 Pc "torque Wrench 50- 200 N-m (500-2000 Kgf-cm, 5-20 Kgf-m, 36-147 Ft-lb.) Range. Click Type" 2 Pc Equipments Engine Simulator 2 Unit Gear Oil Pump 1 Unit "crocodile Jack 2 Ton Capacity" 2 Unit Trouble Light 2 Pc Desktop Computer, 8gb Ram, With Avr, Computer Table 1 Unit Projector, Xvga, 1024 X 768 With 3800 Lumes 1 Unit Steel Cabinet, Sliding Glass Door 8 Unit Materials Oil Pan 2 Pc Spark Plug 12 Pc Drive Belt 7pk1750 3 Pc Brake Cleaner 20 Can Bump Cap 15 Pc Safety Cap 5 Pc Gloves 25 Pair Cotton Arm Sleeves 25 Pc Apron 25 Pc Safety Shoes 25 Pair Safety Goggles 25 Pc The Zamboanga Sibugay Polytechnic Institute (zspi) Formerly Kabasalan Institute Of Technology (kit), Through The General Appropriations Act (gaa) Of 2018 Intends To Apply The Sum Six Hundred Fifty-four Thousand Five Hundred Ten Pesos Only (php 654,510.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Procurement Of Automotive Servicing Nc I Utpras Registration Use. Price Quotation Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Procurement Will Be Conducted In Consonance With Section 52.1b Shopping Of The 2016 Revised Implementing Rule And Regulations(irr) Of Republic Act 9184 (r.a. 9184), Otherwise Known As The “government Procurement Reform Act”. Only Sealed Bids/quotations From Eligible Bidders Will Be Opened And A Contract Will Only Be Awarded To The Lowest Calculated Responsive Quotation. Price Quotation Must Be Delivered To The Address Below On Or Before November 22, 2024; 12:00 Noon. Opening Of Price Quotation Shall Be On November 22, 2024; 2:00 P.m. At Zspi Bac Office. Late Price Quotation Shall Not Be Accepted. The Zamboanga Sibugay Polytechnic Institute (zspi) Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Analyn J. Ellorin Chairperson Bids And Awards Committee Other Information Items Listed In Request For Price Quotation Form Shall Be Awarded On Approved Budget For The Contract Basis.

Description: Contract notice – general guidelines, standard rules, open procedure (construction work) LHV – West Landscape Staircase Essentially the following work is to be carried out: Process, demolish and clear a total area of approx. 19,000 m2 (mostly unpaved areas). Clearing work... MoreLHV – West Landscape Staircase Essentially the following work is to be carried out: Process, demolish and clear a total area of approx. 19,000 m2 (mostly unpaved areas). Clearing work: Mow and clear approx. 4,500 m2 of grass, weeds and wild growth and clear approx. 5,300 m2 of bushes and isolated trees (large-scale or selective clearing). Earthworks: Remove and apply approx. 11,000 m3 of soil, level and remodel the terrain and dispose of approx. 7,000 tonnes of excavated earth as well as deliver and apply approx. 2,100 m3 of topsoil. Trenches for empty cable conduits: approx. 950 m of cable trenches with empty conduits for outdoor lighting etc. and sewage pipes: approx. 170 m of pipe trenches with sewage pipes and inlets, gutters for site and street drainage. Trenches: 1 water pump for children's playground and approx. 90m of drinking water pipe. Retaining walls: approx. 100 m of angled retaining walls, height up to 0.5 m as seating steps, approx. 110 m of seating walls made of prefabricated concrete elements and approx. 35 m of new dry stone walls made of natural stone and approx. 100 m of existing dry stone walls to be removed and reinstalled. Observation platform: 1 wooden observation platform (approx. 40m²) with steel substructure and concrete ring as roof, foundation with micro-injected piles. Street paving and asphalt work: approx. 1,700 m2 of asphalt surface for park paths, approx. 510 m2 of concrete paving for access roads, approx. 590 m2 of natural stone paving for park paths and areas, and approx. 560 m2 of gravel lawn. Sports and leisure facilities: approx. 800 m2 of playground and sports field areas with seamless plastic surface and approx. 20 m of ball stop fence. Playgrounds and play equipment: approx. 1,000 m2 of unbound fall protection area (branch chippings, play sand) and various sports and play facilities. Other installations in outdoor facilities: approx. 90 m of block steps for several staircases, approx. 20 m2 of wooden platform for toddlers to play, approx. 160 m of fence system H = 1.80 m and various benches and other installations for parks. Vegetation work: approx. 10,500 m2 of lawn and meadow seeding, approx. 60 tree plantings and approx. 130 shrub plantings including completion and development care (4 years) Ludwigshöhviertel - landscaping work, landscape staircase west The following work essentially needs to be carried out: approx. 19,000 m2 total area to be processed, demolished and cleared (mostly unpaved areas). Clearing work: approx. 4,500 m2 of grass, weeds and wild growth to be mown and approx. 5,300 m2 of shrubs and individual trees to be cleared (cleared across the area or selectively). Earthworks: approx. 11,000 m3 of soil to be removed and applied, the terrain to be levelled, remodeled and approx. 7,000 tonnes of excavated earth to be disposed of and approx. 2,100 m3 of topsoil to be delivered and applied. Trenches for empty cable conduits: approx. 950 m of cable trenches with empty conduits for outdoor lighting etc. and sewage pipes: approx. 170 m of pipe trenches with sewage pipes and inlets, gutters for site and street drainage. Trenches: 1 water pump for children's playground and approx. 90m of drinking water pipe. Retaining walls: approx. 100 m of angled retaining walls, height up to 0.5 m as seating steps, approx. 110 m of seating walls made of prefabricated concrete elements and approx. 35 m of new dry stone walls made of natural stone and approx. 100 m of existing dry stone walls to be removed and reinstalled. Observation platform: 1 wooden observation platform (approx. 40m²) with steel substructure and concrete ring as roof, foundation with micro-injected piles. Street paving and asphalt work: approx. 1,700 m2 of asphalt surface for park paths, approx. 510 m2 of concrete paving for access roads, approx. 590 m2 of natural stone paving for park paths and areas, and approx. 560 m2 of gravel lawn. Sports and leisure facilities: approx. 800 m2 of playground and sports field areas with seamless plastic surface and approx. 20 m of ball stop fence. Playgrounds and play equipment: approx. 1,000 m2 of unbound fall protection area (branch chippings, play sand) and various sports and play facilities. Other installations in outdoor facilities: approx. 90 m of block steps for several staircases, approx. 20 m2 of wooden platform for toddlers to play, approx. 160 m of fence system H = 1.80 m and various benches and other installations for parks. Vegetation work: Approx. 10,500 m2 of lawn and meadow seeding, approx. 60 tree plantings and approx. 130 shrub plantings including completion and development care (4 years)

Details: Description 1. The Local Government Unit Of Bislig City, Through The 20% Edf Cy 2021 And Cy 2022, Intends To Apply The Sum Of One Million Three Hundred Ninety Six Thousand Nine Hundred Six Pesos And 40/100 (p 1,396,906.40) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Construction Of Water System For San Rafael And Puerto Maharlika @ Barangay Maharlika, Bislig City, Surigao Del Sur. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Local Government Unit Of Bislig City Now Invites Bids For The Above Procurement Project. 2.1 Brief Description Of Work: Installation Of Waterline W/ Fittings & Accessories From Source To Concrete Tub To Elevated Tank To Distribution Lin, Construction Of 1-unit Concrete Tub, Fabrication / Installation Of Solar Panel W/ Mounting Frame & Electrical Works, Painting Works Of Steel Surface For Elevated Tank And Solar Pump Housing And Solar Frame And Concrete Surface For Concrete Tub And Pedestal Of Elevated Tank And Solar Frame, Waterproofing, Construction Of Elevated Water Tank W/ Stainless Steel 4,222 Liters Tank & Hauling Of Materials. 2.2 Contract Duration: Seventy (70) Calendar Days. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 4. Interested Bidders May Obtain Further Information From The Local Government Unit Of Bislig City And Inspect The Bidding Documents At The Address Given Below From 8:00 Am To 5:00 Pm. During Office Hours. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 05, 2024 Until The Deadline For The Submission Of Bids, From Given Address And Website/s Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (p5,000.00). The Procuring Entity Shall Allow The Bidder To Deposit At The City Government Of Bislig Lbp Account 2162-1017-68 And Present Its Proof Of Payment For The Fees In Person Or Through Electronic Means. The Bidding Documents May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Local Government Unit Of Bislig City Will Hold A Pre-bid Conference On November 14, 2024, 1:30 P.m. At Conference Room, City Engineering Office, Lgu-bislig City, Brgy. Poblacion, Bislig City, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Given Address As Indicated Below On Or Before November 26, 2024, 1:30 P.m... Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On November 26, 2024, 1:30 P.m. At The Conference Room, City Engineering Office, Lgu-bislig City, Brgy. Poblacion, Bislig City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Local Government Unit Of Bislig City Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders.

Details: Description National Irrigation Administration Iloilo-guimaras Irrigation Management Tacas, Jaro, Iloilo City Tel./fax No. (033) 3203849 Invitation To Apply For Eligibility And To Bid The National Irrigation Administration, Iloilo-guimaras Irrigation Management Office, Through Its Bids And Awards Committee (bac), Invites Interested Contractors Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) And Duly Registered In The Philgeps, To Bid For The Hereunder Contract: Name Of Contract : Construction Of Canal Structures Of Sibalom Ris Contract Ref. No. : Nia.igimo-resto-nis-sibalom Ris-cw03-25 Location : Oton, Iloilo Approved Budget For The Contract (abc) : Php 9,314,500.90 Contract Duration : 150 Calendar Days Minimum Equipment Requirement: 1 Unit – Stake Truck 1 Unit – Dump Truck 2 Unit – 1 Bagger Concrete Mixer 2 Unit – Concrete Vibrator 1 Unit – Water Truck 1 Unit – Backhoe 2 Unit – Water Pump (4” Dia.) 1 Unit – Plate Compactor Brief Description: Construction Of Canal Structures Prospective Bidders Should Be Philgeps Registered And Possess A Valid Pcab License Applicable To The Contract, Must Have Completed Within 5 Years From The Submission Of Bids, A Single Contract That Is Similar To This Project With A Value Of At Least 50% Of The Abc, Must Have Key Personnel And The Required Equipment Available For The Prosecution Of The Contract. The Bac Will Be Using Non-discretionary “pass/fail” Criteria In The Eligibility Check/screening As Well As The Preliminary Examination Of Bids. The Bac Will Conduct Post-qualification Of The Lowest Calculated Bid. All Particulars Relative To Eligibility Statement And Screening, Bid Security, Performance Security, Pre-bidding Conference, Evaluation Of Bids, Post-qualification And Award Of Contract Shall Be Governed By The Pertinent Provisions Of R.a. 9184 And Its Revised Implementing Rules And Regulation (irr). Interested Bidder May Obtain Further Information From National Irrigation Administration Iloilo-guimaras Irrigation Management Office, At The Address Written Above During Office Hours From Monday-friday. The Bac Will Issue To Prospective Bidders A Complete Set Of Bidding Documents (including Eligibility Requirements) At The National Irrigation Administration Iloilo-guimaras Irrigation Management Office, Tacas, Jaro, Iloilo City, Upon Log-in At Philgeps Website (drl) And Upon Payment Of A Non-refundable Amount Of Ten Thousand Pesos (php 10,000.00) To The Nia-igimo Cashier. Only Bidder’s Representative With The Special Power Of Attorney Or Board Secretary’s Certificate (if Corporation) Will Be Allowed To Purchase Bidding Documents And Upon Presentation Of Its Pcab License. The Significant Times And Deadlines Of Procurement Activities Are As Follows: 1. Deadline Of Receipt Of Loi’s/drl Log-in At Philgeps From The Prospective Bidders – December 2, 2024, 12:00 P.m. 2. Pre-bidding Conference – November 19, 2024, 9:30 A.m. At Nia-asbris Conference Room, Brgy. Tacas, Jaro, Iloilo City 3. Deadline Of Submission And Opening Of Bids – December 2, 2024, 2:00 P.m. At Nia-asbris Conference Room, Brgy. Tacas, Jaro, Iloilo City The National Irrigation Administration Iloilo-guimaras Irrigation Management Office Assumes No Responsibility Or Reject Any Bid, And To Annul The Bidding Process And Reject All Bids Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Approved: Joselito J. Depalubos Acting Section Chief O&m, Asbris & Sris Bac Chairman Noted: Randy C. Alipis, Mpa Division Manager A Head Of The Procuring Entity (hope) Date Of Posting: Philgeps – November 7 – December 2, 2024

Details: Baa Amendment 3, 19 September 2023: this Is An Annual Notice Of An Open Baa As Required By Far 35.016. white Papers Are Still Being Accepted Against This Baa. Please See The Broad Agency Announcement, As Amended, For Specific Details On Submitting White Papers. this Amendment Encompasses The Following Changes: 1. Broad Agency Announcement (baa) a) Due To The Number Of Revisions In Amendment 3, Refer To The “tracked Changes” Version Which Is Provided For Ease Of Identifying The Specific Changes That Have Been Made Since The Previous Amendment. 2. Baa Attachments a) The Following Attachments Are Included In This Baa. Attachments Have Been Amended Or Added As Annotated In Bold Font. 1. Supplemental Instructions For Assistance Instrument Proposal (amended) 2. Model Assistance Instrument (amended) 3. Model Contract (amended) 4. Model Section K – Representations And Certifications (amended) 5. Model Section L – Instructions, Conditions, And Notices To Offerors (amended) 6. Proposal Adequacy Checklist (amended) 7. Contract Data Requirements List (cdrls) Dd Form 1423-1 (amended) 8. Statement Of Objectives (soo)(no Change) 9. Statement Of Work (sow) Supplemental Requirements (amended) 10. Standard Form (sf) 424 Form, Research And Related Senior/key Person Profile (expanded) Form (added) 11. Security Program Questionnaire (added) **the Government Is Providing A Model Contract And Model Assistance Agreement For Planning And Estimating Purposes Only. Each Award Will Be Tailored To Each Specific Proposal. The Attached Model Contract Is All-encompassing Of Multiple Types Of Contracts And Is Provided To Identify All Provisions And Clauses That May Be Included In Subsequent Awards. ------------------------------------------------------------------------------------------------------------------------------------ baa Amendment 2, 14 July 2023: call 1 To The Initial Baa Is Closed. As A Result Of The Issuance Of This Amendment, Objective 4: "expeditionary Medicine (em), Aim 2, Medical Logistics" Of The Baa Is Re-opened. All Areas Of The Statement Of Objectives Are Open. an Annual Update Is Forthcoming And Will Be Issued In A Subsequent Amendment. -------------------------------------------------------------------------------------------------------------------------------------- thisis Call 1, "joint Multi-channel Infusion Pump (jmcip)" To The Initial Broad Agency Announcement (baa), Fa8650-20-s-6008. This Is A Two-step Call For The Specific Research Objective 4, Expeditionary Medicine (em), Aim 2, Medical Logistics Of The Baa. Research Objective 4, Aim 2, Will Be Closed Off From The Open Baa Period Until Award Of The Resulting Proposal(s) From This Call. this Call Is Effective As Of The Date Of This Posting, 18 February 2022.white Papers Are Due No Later Than 5:00 P.m. Eastern Standard Time (est) On 10 March 2022.please Submit White Papers Via Email To The Contracting Pocs For The Call, Ms. Marina Schemmel At Marina.schemmel@us.af.mil And Ms. Kimberly Cerney At Kimberly.cerney@us.af.mil. technical Poc For This Call: Mr. Nathaniel Baldwin, Nathaniel.baldwin.1@us.af.mil contracting Pocs For This Call: Ms. Marina Schemmel, Marina.schemmel@us.af.mil And Ms. Kimberly Cerney, Kimberly.cerney@us.af.mil ________________________________________________________________________________________________________ the Warfighter Medical Optimization Division (rhm) Intends To Solicit White Papers Under This Announcement With The Focus Of Conducting Medical Research In Support Of Optimizing The Warfighter By Enabling, Enhancing, Restoring, And Sustaining The Airman To More Effectively Execute The Air Force Mission. This Medical Research Objective Is Dual Natured: (1) Ensure Medical Availability Of Airmen By Analyzing Attributes (sensory, Behavioral, Physiologic) And Operational Environments (chemical, Physical, Psychological, Biological, Radiological Stressors) To Drive Optimal Performance Of Airmen Engaged In High-demand, High-impact Mission Tasks (2) Investigate How The Flight Environment Affects The Process Of Life, The Ability To Maintain Homeostasis, And The Risk For Injury Or Secondary Insult, Seeking To Ameliorate These Stressors To Optimize Airman Health And Performance. this Baa Will Remain Open For Seventy-two (72)months With Calls Being Released Throughout The Seventy-two (72) Month Period Of Performance.

Details: This Request For Proposals (the “rfp”) Is An Invitation By The University Of Ottawa (the “university”) To Prospective Proponents To Submit Proposals For A Benchtop Scanning Electron Microscope (sem) , Funded By The Canada Foundation For Innovation And The Ontario Research Fund. The Deliverables: The Propsed Equipment Is A Benchtop Scanning Electron Microscope (sem) For Advanced Materials Characterization. High Resolution Imaging Equipment Is Necessary To Allow Precise Surface And Sub-surface Analysis At The Nanoscale. The Primary Goal Is To Enhance Research Capabilities In Quantum Materials Science And Nanotechnology, Leading To Understanding Of Interface Status Of Multi-stacked Thin Film (less Than 100 Nm), Which Is Well Aligned With Objectives Of Center For Hybrid Interfaces And Intelligent Thin-films (hiit) Objectives. Typical Sem Provides A Capability Of Ultra-high Resolution And Analytical Functionalities Including Elemental Analysis By Energy Dispersive X-ray Spectroscopy (eds). The Smaller Form-factor Of Benchtop Sem Provides Further Advantages Of Faster Analysis Preparation Time, Comparable Resolution To Full-size Sem, And Little Requirement Of On-site Facility Preparation, Such As Two-stage Pumping System And Cooling Water. Sem Provides High-resolution Imaging Down To The Nanometer Scale With A Flexible Paltform That Allows Both Secondary Electron (se) And Backscattered Electron (bse) Imaging. The System Should Be Equipped With Eds To Enable Compositional Analysis. The Equipment Will Be Used Across Various Research Topics Including Thin Film Transistors, Photodetectors, Quantum-dots, And Metasurface Devices, Which Facilitating Cutting-edge Research And Development In Hiit Project. Our Expectation Are To Get Clear And High-contrast Images With Superior Depth Of Field And Analytical Capability. Mandatory Technical Specifications Requirements: 1.0 - Performance Of Benchtop Scanning Electron Microscope 1.1 - The Resolution Must Be Equal To Or Better Than 20 Nm. 1.2 - Displayed Magnification On The Software Must Be Equal Or Larger Than 100,000x. 1.3 - Sample Stage Must Be Larger Than 30 Mm X 30 Mm 1.4 - Sample Stage Travel Range Must Be Equal To Or Larger Than 30 Mm X 30 Mm 1.5 - Eds System And Eds Software Must Be Equipped With Sem. Third-party Eds System Is Acceptable. 1.6 - Acceleration Voltage Must Be Adjustable Between 5 Kv And 15 Kv. 1.7 - Either Secondary Electron Or Backscattered Electron Detector Must Come With The Instrument. 1.8 - The Instrument Must Offer Automatic Focus. 1.9 - Aperture Replacements Must Be Available Through The Supplier. 1.10 - The Maximum Field Of View Must Be Equal To Or Larger Than 500 X 500 Um. 1.11 - Eds System Must Show Accurate Energy Level With A Standard Sample. (e.g. C, Si, Au) 1.12 - The Tool Must, At A Minimum, Have One Chamber Viewing Camera (either Side-view Of The Chamber Or Top-view Of The Sample Holder). 1.13 - Anti-vibration Table Compliant To System Requirements Must Be Included 2.0 - Software And Computers 2.1 - The Tool Must Come With A Computer And Software. 2.2 - If Joystick Panel Is Required, The Tool Must Include Joystick Panel. 2.3 - The Hard-drives Must Be Solid-state-drive And One Operating Ssd (no Specific Capacity) And One Imaging-data Saving Ssd (1tb) Must Be Installed In The Computer. 2.4 - Installation Files To Restore The Sem Functionalities In Case Of Hard Drive Failure Must Be Provided. 3.0 - Warranty, Installation And Training 3.1 - Must Include 1-year Standard Manufacturer’s Warranty And Technical Support (on-site, Emails And Phone Calls). 3.2 - Must Include On-site Installation And Training. Supplier Must Agree To Video-recording Of The Training Session(s) For The Purpose Of Future Users Trainings. 4.0 - Other 4.1 - The Tool Must Not Require A Chiller

Details: Description National Irrigation Administration Davao Del Sur Irrigation Management Office Early Procurement Activities (epa) Repair/rehabilitation Of Supplementary Dam Of Badagoy Cis Cy 2025 The National Irrigation Administration-davao Del Sur Irrigation Management, Through The Fy 2025 National Expenditure Program (nep) Intends To Apply The Sum Of Four Million Seven Hundred Thirty Nine Thousand Eight Hundred Seventy Nine Pesos & 82/100 Only (php 4,739,879.82) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Epa Of Repair/rehabilitation Of Supplementary Dam Of Badagoy Cis Cy 2025, Lmc-ds-2025-01. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The National Irrigation Administration-davao Del Sur Irrigation Management Now Invites Bids For The Above Procurement Project. Completion Of The Works Is Required 180 Calendar Days. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Interested Bidders May Obtain Further Information From National Irrigation Administration-davao Del Sur Irrigation And Inspect The Bidding Documents At The Address Given Below From Monday To Friday (8:00 Am-5:00 Pm). A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 12-december 2, 2024 From Given Address And Website/s Below Upon Payment Of The Applicable Fee For The Bidding Documents In The Amount Five Thousand Pesos (php 5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. The National Irrigation Administration-davao Del Sur Irrigation Management Will Hold A Pre-bid Conference On November 20, 2024 @ 9:00 O’clock In The Morning At Nia-davao Del Sur Irrigation Management Office, Conference Room, Lapu-lapu St., Digos City Which Shall Be Open To Prospective Bidders. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below, On Or Before December 2, 2024 @ 9:00 O’clock In The Morning. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. Bid Opening Shall Be On Before December 2, 2024 @ 9:30 In The Morning At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. Minimum Equipment Required: Trasit Mixer-2 Units, Boom Truck-1 Unit, Cargo Truck-1 Unit, Backhoe-1 Unit, Dumptruck-2 Units, Trailer Truck-1 Unit, Portable Batching Plant-1 Unit, One Bagger Concrete Mixer-1 Unit, Sheet Pile Drive–1 Unit, Water Pump–1 Unit, Utility Vehicle-1 Unit. The National Irrigation Administration-davao Del Sur Irrigation Management Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Sidney G. Rebosura Bac Secretariate Nia-davao Del Sur Irrigation Management Office Lapu-lapu St., Digos City, Davao Del Sur Email Add: R11.davaodelsur-imo@nia.gov.ph Tel. No. 237-6789 Engr. Jianel U. Masinadiong Bac Chairman