Printing Tenders

Details: This Is A Sources Sought Announcement Only. It Is Neither A Solicitation Announcement Nor A Request For Proposals Or Quotes And Does Not Obligate The Government To Award A Contract. Requests For A Solicitation Will Not Receive A Response. Responses To This Sources Sought Must Be In Writing. The Purpose Of This Sources Sought Announcement Is For Market Research To Make Appropriate Acquisition Decisions And To Gain Knowledge Of Potential Qualified Service-disabled Veteran Owned Small Businesses, Veteran Owned Small Businesses, 8(a), Hubzone And Other Small Businesses Interested And Capable Of Providing The Services Described Below. Documentation Of Technical Expertise Must Be Presented In Sufficient Detail For The Government To Determine That Your Company Possesses The Necessary Functional Area Expertise And Experience To Compete For This Acquisition. responses To This Notice Shall Include The Following: (a) Company Name (b) Address (c) Point Of Contact (d) Phone, Fax, And Email (e) Duns Number/uei Number (f) Cage Code (g) Tax Id Number (h) Type Of Small Business, [e.g. Services Disabled Veteran Owned Small Business, Veteran-owned Small Business, 8(a), Hubzone, Women Owned Small Business, Small Disadvantaged Business, Or Small Business Hubzone Business] And (i) Must Provide A Capability Statement That Meets The Limitations Of Subcontracting, Far 852.219-75, Va Notice Of Limitations On Subcontracting Certificate Of Compliance For Services And Construction, And Addresses The Organizations Qualifications And Ability To Perform As A Contractor For The Work Described Below: under The Guidelines Of The American Society For Testing And Materials (astm), Standard Industry Maintenance Of Several Diesel Fuel Tanks (two Plus Two Of 10,000 And 12,000 Gallon Capacities), Including Industry Standard Internal Tank Flushing And Replacement Of Filters, Lines, As Needed, Until Fuel Meets/complies With The Epa Regulatory Standards, 40 Cfr Part 63.6604(b), Compression Ignition (ci) Reciprocating Internal Combustion Engines (rice) And 40 Cfr 1090.305, Ultra-low-sulfur Diesel (ulsd). important Information. The Government Is Not Obligated To Nor Will It Pay For Or Reimburse Any Costs Associated With Responding To This Sources Sought Synopsis Request. This Notice Shall Not Be Construed As A Commitment By The Government To Issue A Solicitation Or Ultimately Award A Contract, Nor Does It Restrict The Government To A Particular Acquisition Approach. The Government Will In No Way Be Bound To This Information If Any Solicitation Is Issued. The Va Is Mandated By Public Law 109-461 To Consider A Total Set-aside For Service-disabled Veteran Owned Small Business Set Aside. However, If Response By Service-disabled Veteran Owned Small Business Firms Proves Inadequate, An Alternate Set-aside Or Full And Open Competition May Be Determined. No Sub-contracting Opportunity Is Anticipated. The North American Classification System (naics) Code For This Acquisition Is 238220 Plumbing, Heating, And Air-conditioning Contractors ($19 Million Dollars). notice To Potential Offerors: All Offerors Who Provide Goods Or Services To The United States Federal Government Must Be Registered In The System For Award Management (sam) At Www.sam.gov And Complete Online Representations And Certifications Application (orca). Additionally, All Service-disabled Veteran Owned Businesses Or Veteran Owned Businesses Who Respond To A Solicitation On This Project Must Be Registered With The Department Of Veterans Affairs Center For Veterans Enterprise Vetcert Registry Located At Https://veterans.certify.sba.gov. All Interested Offerors Should Submit Information (with Source Sought Notice # In The Subject Header) By E-mail To Gene.chu2@va.gov All Submissions To Be Marked Attn: Gene Chu, Contract Specialist, And Should Be Received No Later Than 1:00 Pm Pacific Time-los Angeles, 1/06/2025. statement Of Work requirement: perform Full Cleaning And Polishing Service On Diesel Fuel Tanks B-1, B-2, D-3, D-4; After Cleaning And Refilling; Provide A Fuel Quality Analysis Report For Up To Five Tanks. place Of Performance: va San Diego Healthcare System 3350 La Jolla Village Dr. san Diego, Ca 92161 building 2 period Of Performance: annual Requirement contract Type: firm Fixed Price background: there Is A Need To Fill Our Diesel Fuel Tanks And To Clean And Polish All Fuel In The Diesel Tanks To Remove Debris, Water, And Microbes To Get Our Diesel Fuel In The Required Normal And Fair Range For Service. scope Of Work: pump And Remove All Water, Sludge, And Other Containments From The Bottom Of The Tank. use Chemical Cleaners To Remove Varnish And Sludge. fill Up The Following Fuel Tanks With The Following Amount Of Red Diesel #2 Fuel: b-1: 10000gallons b-2: 10000 Gallons d-3: 12000 Gallons d-4: 12000 Gallons all Tanks Should Be At The 90% Filled Level. treat All Fuel Tanks Fuel With Chemical Conditioners Including Fungicides, Algicides, And Fuel Stabilizers. perform A Final Polish Of All Fuel Tanks Using Centrifuges, Coalescers And Water Blocking Filters To Reverse Oxidation, Separate Anything Entrained And Remove Non Combustibles. perform And Provide A Fuel Quality Report After All Tanks Have Been Filled, Cleaned And Polished By Taking All Necessary Samples From Each Tank And Sending Them To An Accredited Fuel Testing Laboratory. The Laboratory Will Test The Samples Using The Following Astm Guidelines For S500 Diesel Fuel: d4176 Standard Test Method For Free Water And Particulate Contamination In Distillate Fuels d86 Automated Method Distillation Of Petroleum Products At Atmospheric Pressure Standard Test du Pont F21 149â°c (300â°f) Accelerated Stability Test d287 Standard Test Method For Api Gravity Of Crude Petroleum And Petroleum Products d4737 Standard Test Method For Calculated Cetane Index By Four Variable Equation d93 Standard Test Methods For Flash Point By Pensky-martens Closed Cup Tester d6304 Standard Test Method For Determination Of Water In Petroleum Products, Lubricating Oils, And Additives By Coulometric Karl Fischer Titration d5453 Standard Test Method For Determination Of Total Sulfur In Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, And Engine Oil By Ultraviolet Fluorescence the Laboratory Will Send Back The Report With The Final Analysis. Using This Report, The Utilities Systems Supervisor Will Contact The Diesel Fuel Provider Contractor And Have Him Give Us A Plan Of Action To Correct Any Out-of-range Tests. once The Actions For The Out-of-range Tests Are Completed, The Diesel Fuel Specialist Will Take Samples From Each Fuel Tank With The Out-of-range Tests And Send Back To The Testing Laboratory To Perform The Tests On The Out-of-range Items To Ensure The Actions Corrected The Out-of-range Items. This Process Will Continue Until All Parameters Are In Range For All 4 Tanks. perform Quarterly Testing On All Fuel Tanks/day Tanks 1-5 To Include Ex: Tank I.d. #1 #2 #3 #4 / location/size ust B-1 Diesel/ 12,000 Gallons ust B-2 Diesel/ 12,000 Gallons ust D-3 Diesel/ 10,000 Gallons ust D-4 Diesel/ 10,000 Gallons / New Fuel Tank water/free sl sl sl sl water/emuls sl sl sl 2 microbes 1 1 1 1 solids/debris sl sl sl 2 clarity 1 1 1 2 fuel Level 1 1 1 1 Fuel Condition Rating: 1= Normal 2= Fair 3= Unacceptable Sl= Sli fuel Samples Taken Quarterly From The Bottom Of Each Main Fuel Supply Tank For Lab Analysis. Fuels That Appear To Have Slight To Moderate Levels Of Fuel Particulates, Will Wait For The Lab Reports To Address Any Corrective Service Based On The Lab S Recommendation. replace 6 Fuel Filters Per Correct Design Requirements, In Accordance With Federal And State Requirements. provide A Full Maintenance Report And Follow Va Contractor Logging Procedures. the Contractor Shall Meet The Compression Ignition (ci) Reciprocating Internal Combustion Engines (rice) Epa Requirements Shown Below: 40 Cfr Part 63.6604(b) Standards: beginning January 1, 2015, If You Own Or Operate An Existing Emergency Ci Stationary Rice With A Site Rating Of More Than 100 Brake Hp And A Displacement Of Less Than 30 Liters Per Cylinder That Uses Diesel Fuel And Operates For The Purpose Specified In § 63.6640(f)(4)(ii), You Must Use Diesel Fuel That Meets The Requirements In 40 Cfr 1090.305 For Nonroad Diesel Fuel, Except That Any Existing Diesel Fuel Purchased (or Otherwise Obtained) Prior To January 1, 2015, May Be Used Until Depleted. 40 Cfr 1090.305 Ulsd Standards: overview: except As Specified In § 1090.300(a), Diesel Fuel Must Meet The Ulsd Per-gallon Standards Of This Section. sulfur Standard: maximum Sulfur Content Of 15 Ppm. cetane Index Or Aromatic Content: diesel Fuel Must Meet One Of The Following Standards: minimum Cetane Index Of 40. maximum Aromatic Content Of 35 Volume Percent. maintenance Operating Procedures (mop) remove All Covers, Caps, Plugs, Vents, And Monitoring To Gain Access To The Openings On The Tank To Be Serviced. pull Top, Middle, And Bottom Fuel Samples From The Openings On The Tank To Be Serviced. Label And Document All Information On The Relative Forms. Run Partial Field Evaluation On The Samples Pulled Using Field Test Kits And Portable Equipment To Establish The Presence Of Organic And Inorganic Contamination Through Discovery And Working Knowledge Of The Tanks And Fuel We Work On. Refer To Afs Lit, Industry Protocol, Astm Standards For The Fuel, Engine And Tank Manufactures To Bench Mark The Methodology For The Fuel Being Used. If A Field Determination Can T Be Made, Send The Pre- Sample To An Independent Laboratory For Analysis. after Extrapolating The Data Generated From The Field Evaluation Or Lab Results Prescribe And Implement The Necessary Correction Process. purge Supply And Return Lines: Disconnect Supply And Return Lines At A Convenient Location Connect An External Pump To Each Line. While Fuel Is Pumped Through The Lines Into Environmentally Safe Containers For Disposal, The Fuel Is Cleaning The Internal Surfaces Of Those Lines. existing Fuel Will Be Pumped Out Including The Fuel That Was Purged Through The Lines. fuel Will Disposed At Disposal Site And Waste Manifest Provided. new Fuel Will Be Pumped Into The Tanks. begin The Cleaning Process Utilizing All The Openings For Each Tank. place The Afs Tank And Fuel Quality Service System In Tank Cleaning Mode. Start Working The Contaminated Tank Surfaces. The Tank And Fuel Are Simultaneously Worked Removing The Contamination. sample And Field Evaluate To Determine Throughout The Cleaning Process. If The Sample Appears To Be Minimal Or Marginal Move On To The Treatment And Fuel Cleaning Mode. position The Afs System In Treatment And Fuel Cleaning Mode And Complete The Service Process And Continue Sampling To Ensure All Contamination Is Removed. blue 42 And Fqs 1.5 Treatments Are Introduced Into The Tank And Thoroughly Mixed Using Afs Tank And Fuel Quality Service System. package Final Sample And Send To The Lab For Verification To Ensure A Clean Tank Providing Safe Useable Fuel. after Gaining Control Of The Tank And Fuel Quality, A Written Report Is Generated For The Customer. access Point contractor Qualifications & Other Responsiblites: contractor Shall Obtain All Necessary Licenses Required To Perform This Work. Contractor Shall Take All Precautions Necessary To Protect Persons And Property From Injury Or Damage During The Performance Of This Contract. Contractor Shall Be Responsible For Any Injury To Himself/herself, His/her Employees, Or Others, As Well As For Any Damage To Personal Or Public Property That Occurs During The Performance Of This Contract That Is Caused By Him/her Or His/her Employees Fault Or Negligence. Contractor Shall Maintain Personal Liability And Property Damage Insurance Prescribed By The Laws Of The Federal Government. the Government Reserves The Right To Accept Or Reject Contractor S Employee For The Rendering Of Services. Complaints Concerning Contract Personnel S Performance Or Conduct Will Be Dealt With By The Contractor And Cor With The Final Decision Being Made By The Contracting Officer. safety Requirements: all Personnel Employed By The Contractor In The Performance Of This Contract, Or Any Representative Of The Contractor Entering On Vasdhs Shall Comply With Applicable Federal, State, And Va Safety And Fire Regulations And Codes, Which Are In Effect During The Performance Period Of The Contract. contractor Shall Perform Work In Strict Accordance With Existing Relevant, Accredited Standards And Codes To Minimize The Possibility Of Injury To Personnel, Or Damage To Government Equipment. Every Effort Shall Be Made To Safeguard Human Life And Property. contractor Shall Comply With All Applicable Federal, State, And Local Requirements Regarding Workers Health And Safety. The Requirements Include, But Are Not Limited To, Those Found In Federal And State Occupational Safety And Health Act (osha) Statutes And Regulations, Such As Applicable Provisions Of Title 29, Code Of Federal Regulations (cfr), Parts 1910 And 1926, Nfpa 70e, Article 130.7 29 Cfr 1910.132(d)(1)(iii), 29cfr1910.137 contractor Shall Provide All Necessary Tools, And Personal Protective Equipment (ppe) To Perform The Work Safely, Effectively, And Timely. the Va San Diego Healthcare System, Building 1, Main Building, Contains Asbestos. Any Worker Entering These Asbestos Containing Areas Must Have An Asbestos Certification Of No Less Than 16 Hours And A Valid Fit Test Certification. Certifications Must Be Presented To The Va Project Manager Before Any Work In An Asbestos Area May Begin. changes: the Awarded Contractor Is Advised That Only The Contracting Officer, Acting Within The Scope Of The Contract Has The Authority To Make Changes Which Affect The Contract In Terms Of Quality, Quantity, Price Or Delivery. in The Event The Contractor Affects Any Such Change At The Direction Of Any Person Other Than The Contracting Officer, The Change Shall Be Considered To Have Been Made Without Authority And No Adjustment Shall Be Made In The Contract Price To Cover Any Increase In Costs Incurred As A Result Thereof. va Policy: possession Of Weapons Is Prohibited. Enclosed Containers, Including Tool Kits, Are Subject To Search. Violations Of Va Regulations May Result In Citations Answerable In The United States (federal) District Court. parking Policy: it Is The Responsibility Of Contractor Personnel To Park Only In Designated Parking Areas. Parking Information Is Available From The Va Police. The Va Shall Not Validate Or Make Reimbursement For Parking Violations Of The Contractor S Personnel Under Any Circumstances. identification Badges: all Contractor Personnel Are Required To Wear Identification (i.d.) Badges During The Entire Time They Are On The Va Healthcare System Grounds. I.d. Badges Must Have An Identification Picture And Shall State The Name Of The Individual And The Company Represented. smoking Policy: smoking Is Not Permitted Within The Va Healthcare System Facilities Or Campus. normal Working Hours: normal Hours Of Operation Are Monday Through Friday From 7:30 Am To 4:00 Pm Pacific Time. All Work Is Expected To Be Performed Generally During Normal Hours Of Coverage Unless Requested Or Approved By The Co Or His/her Designated Vha Medical Center Point Of Contact. before Commencement Of Work, The Contractor Shall Confer With The Designated Vha Medical Center Point Of Contact And Contracting Office To Agree On A Sequence Of Procedures; Means Of Access To Premises And Building. All Work Performed, To Include Delivery Of Materials And Equipment, Shall Be Made With Minimal Interference To Government Operations And Personnel. work Performed Outside The Normal Hours Of Coverage Must Be Approved By The Co Or His/her Designated Vha Medical Center Point Of Contact overtime And National Holidays: any Overtime Or Holiday Pay That May Be Entitled To The Contractor S Employees Shall Be The Sole Responsibility Of The Contractor And Shall Not Be Billed To Nor Reimbursed By The Government. the Contractor Is Not Required To Provide Service On The Following U.s. Government Holidays, Nor Shall The Contractor Be Paid For These Days: new Year S Day january 1 martin Luther King S Birthday third Monday In January president S Day third Monday In February memorial Day last Monday In May independence Day july 4 labor Day first Monday In September columbus Day second Monday In October veterans Day november 11 thanksgiving Day fourth Thursday In November christmas Day december 25 invoice And Payment: contractor Shall Submit Monthly Invoices In The Arrears Electronically Via The Tungsten- network System At The End Of Each Month, For Payment Of The Storage Containers In That billing Period. Contractor Shall Submit Original Invoice Electronically To: department Of Veterans Affairs financial Services Center http://www.tungsten-network.com (toll-free Telephone Number: (877) 489-6135) payment Shall Be Made Monthly In The Arrears Upon Receipt Of Properly Prepared Invoice. the Invoice Must Be Itemized To Include The Following Information. Any Information Listed Below That Is Not Provided On An Invoice, Will Render That Invoice Incomplete And The Invoice Will Be Returned For Immediate Correction. a. Dates Of Service. b. Description Of Services. c. Invoice Number, Date. d. Contract Number. e. Obligation Number failure To Comply With The Above May Cause Delay Of Payment To The Contractor. a.1 Vaar 852.219-75 Va Notice Of Limitations On Subcontracting Certificate Of Compliance For Services And Construction (nov 2022) (a) Pursuant To 38 U.s.c. 8127(k)(2), The Offeror Certifies That (1) If Awarded A Contract (see Far 2.101 Definition), It Will Comply With The Limitations On Subcontracting Requirement As Provided In The Solicitation And The Resultant Contract, As Follows: (i) [] Services. In The Case Of A Contract For Services (except Construction), The Contractor Will Not Pay More Than 50% Of The Amount Paid By The Government To It To Firms That Are Not Vip-listed Sdvosbs As Set Forth In 852.219 73 Or Vosbs As Set Forth In 852.219 74. Any Work That A Similarly Situated Vip-listed Subcontractor Further Subcontracts Will Count Towards The 50% Subcontract Amount That Cannot Be Exceeded. Other Direct Costs May Be Excluded To The Extent They Are Not The Principal Purpose Of The Acquisition And Small Business Concerns Do Not Provide The Service As Set Forth In 13 Cfr 125.6. (ii) [] General Construction. In The Case Of A Contract For General Construction, The Contractor Will Not Pay More Than 85% Of The Amount Paid By The Government To It To Firms That Are Not Vip-listed Sdvosbs As Set Forth In 852.219 73or Vosbs As Set Forth In 852.219 74. Any Work That A Similarly Situated Vip-listed Subcontractor Further Subcontracts Will Count Towards The 85% Subcontract Amount That Cannot Be Exceeded. Cost Of Materials Are Excluded And Not Considered To Be Subcontracted. (iii) [] Special Trade Construction Contractors. In The Case Of A Contract For Special Trade Contractors, The Contractor Will Not Pay More Than 75% Of The Amount Paid By The Government To It To Firms That Are Not Vip-listed Sdvosbs As Set Forth In 852.219 73 Or Vosbs As Set Forth In 852.219 74. Any Work That A Similarly Situated Subcontractor Further Subcontracts Will Count Towards The 75% Subcontract Amount That Cannot Be Exceeded. Cost Of Materials Are Excluded And Not Considered To Be Subcontracted. (2) The Offeror Acknowledges That This Certification Concerns A Matter Within The Jurisdiction Of An Agency Of The United States. The Offeror Further Acknowledges That This Certification Is Subject To Title 18, United States Code, Section 1001, And, As Such, A False, Fictitious, Or Fraudulent Certification May Render The Offeror Subject To Criminal, Civil, Or Administrative Penalties, Including Prosecution. (3) If Va Determines That An Sdvosb/ Vosb Awarded A Contract Pursuant To 38 U.s.c. 8127 Did Not Act In Good Faith, Such Sdvosb/vosb Shall Be Subject To Any Or All Of The Following: (i) Referral To The Va Suspension And Debarment Committee; (ii) A Fine Under Section 16(g)(1) Of The Small Business Act (15 U.s.c. 645(g)(1)); And (iii) Prosecution For Violating Section 1001 Of Title 18. (b) The Offeror Represents And Understands That By Submission Of Its Offer And Award Of A Contract It May Be Required To Provide Copies Of Documents Or Records To Va That Va May Review To Determine Whether The Offeror Complied With The Limitations On Subcontracting Requirement Specified In The Contract. Contracting Officers May, At Their Discretion, Require The Contractor To Demonstrate Its Compliance With The Limitations On Subcontracting At Any Time During Performance And Upon Completion Of A Contract If The Information Regarding Such Compliance Is Not Already Available To The Contracting Officer. Evidence Of Compliance Includes, But Is Not Limited To, Invoices, Copies Of Subcontracts, Or A List Of The Value Of Tasks Performed. (c) The Offeror Further Agrees To Cooperate Fully And Make Available Any Documents Or Records As May Be Required To Enable Va To Determine Compliance With The Limitations On Subcontracting Requirement. The Offeror Understands That Failure To Provide Documents As Requested By Va May Result In Remedial Action As The Government Deems Appropriate. (d) Offeror Completed Certification/fill-in Required. The Formal Certification Must Be Completed, Signed And Returned With The Offeror S Bid, Quotation, Or Proposal. The Government Will Not Consider Offers For Award From Offerors That Do Not Provide The Certification, And All Such Responses Will Be Deemed Ineligible For Evaluation And Award. certification i Hereby Certify That If Awarded The Contract, [insert Name Of Offeror] Will Comply With The Limitations On Subcontracting Specified In This Clause And In The Resultant Contract. I Further Certify That I Am Authorized To Execute This Certification On Behalf Of [insert Name Of Offeror]. printed Name Of Signee: ___________ printed Title Of Signee: _____________ signature: ____________ date: ______________ company Name And Address: _______________ (end Of Clause)

Details: Description Invitation To Bid For Procurement Of Security Services 2025, Re-bid Project Identification No.: Pb-albaygoods-24-21 1. The Department Of Education, Schools Division Office Of Albay, Through The General Appropriations Act Of 2024 Intends To Apply The Sum Of Philippine Pesos One Million Two Hundred Thousand (php 1,200,000.00) Only Being The Abc As Payment For The Above-mentioned Contract. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Quantity Unit Of Measure Item Description Estimated Unit Cost (php) Estimated Cost (php) Procurement Of Security Services 2025, Re-bid 3 Guard Day Shift Security Guards From January – December 2025 (monday To Sunday) 17,550.00 631,800.00 2 Guard Day Shift Security Guards From January – December 2025 (saturday & Sunday) 4,160.00 99,840.00 2 Guard Night Shift Security Guards From January – December 2025 (monday To Sunday) 19,515.00 468,360.00 Total 1,200,000.00 Additional Information: Days Shift Sg Rate/month Months Per Year Weekdays Day 4 Php 14,000.00 12 Php 672,000.00 Night 2 Php 14,300.00 12 Php 343,200.00 Sat/sun/holidays Day 4 Php 15,300.00 2 Php 122,400.00 Night 2 Php 15,600.00 2 Php 62,400.00 Total Php 1,200,000.00 Note: The Number Of Guards For Every Shift Is Two (2) Guards. The Total Number Of Guards For All Shifts Is Six (6). Revised Security Plan Of The Schools Division Of Albay I. Rationale Article Ii, Section 18 Of The Constitution Of The Republic Of The Philippines States That, "the State Affirms Labor As A Primary Social Economic Force. It Shall Protect The Rights Of Workers And Promote Their Welfare." Chapter Ii, Article 168 Of The Labor Code Of The Philippines (as Amended), Also States, "the Secretary Of Labor And Employment Shall, By Appropriate Orders, Set And Enforce Mandatory Occupational Safety And Health Standards To Eliminate Or Reduce Occupational Safety And Health Hazards In All Workplaces Xxx." Section 2 Of Presidential Decree No. 1445 Otherwise Known As The State Auditing Code Of The Philippines States That "all Resources Of The Government Shall Be Managed, Expended Or Utilized In Accordance With Law, Rules And Regulations & Safeguarded Against Loss Or Wastage Xxx". The Responsibility To Take Care Of Such Policy Rests Directly With The Chief Or The Head Of The Government Agency Concerned. As A Government Workplace, It Is Therefore Inherent To Schools Division Of Albay To Have A Security Plan To Protect Not Just Its Employees And Properties But Its Clientele And Visitors As Well, Against Assault, Arson, Mischief, Pilferage, Robbery, Sabotage, Terrorism And Theft. It Should Also Provide Safety Measures And Response To Prevent And Minimize Loss Or Damage From Calamities And Civil Disturbance. Ii. Objectives ܀ To Undertake Security Measures For Total Protection Of The Schools Division Of Albay Personnel Which Might Endanger Their Lives And The Agency's Properties As Well ܀ To Undertake Security Operations Which Includes, But Not Limited To, Traffic/crowd Control And Emergency Response ܀to Enforce Sdo's Existing Rules & Regulations On The Security Of Personnel ܀ To Undertake Measures To Prevent Unauthorized Persons From Entering The Office Building ܀ To Perform Such Other Functions As May Deemed Necessary By The Schools Division Of Albay Iii. Scope This Plan Shall Be Implemented In The Schools Division Office, Ligñon Hill, Bogtong, Legazpi City, Albay. Iv. Definition Of Terms For Purposes Of This Plan The Following Terms Are Defined As Follows (reference: Dole Department Order No. 150-16, S. 2016): Principal - Refers To Any Individual, Company, Cooperative, Or Establishment, Including Government Agencies And Government - Owned And Controlled - Corporations, Who Or Which Puts Out Or Farms Out A Security And/or Detective Job, Service, Or Work To A Private Security Service Contractor. Security Guard - Refers To Any Person Who Offers To Renders Personal Service To Watch Or Secure A Residence, Business Establishment, Building, Compound, Any Other Area Or Property; Or Inspects, Monitors, Or Performs Body Checks Or Searches Of Individuals Or Baggage And Other Forms Of Security Inspection. Security Service Contractor (ssc) - Is Synonymous With Private Security Agency (psa) Which Refers To Any Person, Association, Partnership, Firm Or Private Corporation Engaged In Contracting, Recruitment, Training, Furnishing, Or Posting Of Security Guard And Other Private Security Personnel To Individuals, Corporations, Offices And Organizations, Whether Private Or Public, For Their Security Needs As The Philippine National Police (pnp) May Approve. Service Agreement – Refers To Contract Between The Principal And The Ssc/psa Containing The Terms And Conditions Governing The Performance Or Completion Of Security Service, Job, Or Work Being Farmed Out For A Definite Or Predetermined Period. Duty Detail Order – Refers To A Written Order/schedule/assignment Issued To A Security Guard And Other Private Security Personnel By A Superior Officer, Usually The Private Security Agency Or Branch Manage Or Operation’s Officer, For The Performance Of Security And/or Detective Service Duty/ies. V. Target Implementation A. Pre-deployment In Coordination With The Sdo-albay Management, Otherwise Known As The Principal, And The Outgoing Security Service Contractor (ssc), The Incoming Ssc Shall Organize An Advance Team Who Will Conduct A Pre-deployment Orientation Onsite. At The Expense Of The Winning Bidder, The Said Advance Team Will Render Duties Side By Side With The Personnel Of The Outgoing Security Provider At Least Two Days Before The Formal Assumption. B. Deployment A Minimum Of Eight (8) Hours Before Expiration Of The Security Contract Of The Outgoing Security Contractor, The Incoming Security Force Listed In The Manning Detail Order Must Attend A Briefing To Be Conducted By The Office Of The Administrative Officer V (general Services). Thereafter, They Shall Be Posted Alongside With The Outgoing Security Guards To Get Acquainted With The New Assignments. Authorized Representative Of The Outgoing Security Contractor Shall Be Required To Make Proper Endorsement Of Accountability To The Authorized Representative Of The Incoming Security Contractor In The Presence Of The Authorized Sdo-albay Representative Prior To Their Departure. A List Of Incoming Security Personnel Who Will Take-over Duties At The Sdo-albay Together With Their Individual Bio-data And Licenses And Mandatory Clearances Shall Be Submitted Five (5) Days Earlier To The Administrative Officer V (general Services) For Scrutiny, Including Training Certificate Which Show Proof That They Have Undergone Required Training For Security Guards And Must Have The Knowledge Of Pertinent Rules And Regulations. Guards To Be Posted Should All Be New, And No Retention Of Old Security Guards, Unless The Head Of The Agency Approves. During The Actual Takeover Of Duties At The Sdo-albay, The Security Guards Shall Be Accompanied And Closely Supervised By A Senior Official Of The Incoming Security Contractor (agency). All Incoming Security Personnel Who Will Assume To Take Over Duties Shall Report In Proper Uniform With Head Gears And Paraphernalia, Prescribed Equipment (as Prescribed In The Technical Proposal) And All Necessary Documents Such As Duty Detail Order, Guard’s License, Copy Of Firearm License, And Individual Company Id. Weekly Submission Of Incident Reports To The Office Of The Administrative Officer V (general Services) For Record Purposes, But Unusual/untoward Incidents Must Be Reported Immediately After Their Occurrence. C. Logistics Security Contractor Will Provide The Security Force With The Minimum Equipment Required Under The Bidding Rules Such As Firearms, Licensed Radio Communications Equipment And Other Equipment Deemed Necessary In The Effective Implementation Of Security Policies, Rules & Regulations Of Department Of Education, Schools Division Office Of Albay. Daily Time Record And Other Logistical Supplies Shall Also Be Provided By The Security Contractor. D. Administration 1. Organizational Structure Headquarters Security Agency/security Service Contractor (ssc) Security Coordinator 1st Shift 2nd Shift 3rd Shift Guard Guard Guard 2. Minimum Requirements A. Security Manpower A. Minimum Qualifications Of Security Officer/s And Security Guards A.1 The Security Guards Shall Have The Following Minimum Qualifications: A.1.i) Must Be At Least 25 Years Old. A.1.ii) At Least High School Graduate, As Indicated In The Private Security License Card A.1.iii) Has Undergone Pre-licensing Training Program For New Recruits, Or Refresher Training Program To Include Among Others, First-aid Administration, Fire-fighting Techniques, And For Security Guards With More Than One Year Experience, As Indicated In The Private Security License Card. A.1.iv) Physically And Mentally Fit, As Indicated In The Private Security License Card. A.1.v) Of Good Moral Character And Reputation Supported With Nbi Clearance. A.1.vi) Knows How To Deal Pleasantly And Courteously With Personnel, Clients And The General Public, Supported With A Certification From The Security Agency. A.1.vii) Proof Of Neuro-psychiatric And Drug Test Clearance From Any Accredited Drug Testing Laboratory A.2 Valid Private Security License Card And Nbi Clearance During The Opening Of Bids And Contract Signing And Implementation. B. Security Equipment Supplies/materials/equipment Unit/piece/set Required Operational, Functional And Well-maintained Firearms - 9mm Pistol With Valid License In The Name Of The Security Agency & One (1) Magazine. 2 Handheld Radio With Valid Ntc License 2 Pre-numbered Logbook 15 Flashlights 2 Big Umbrella 1 First Aid Kit 1 3. Guard Assignments/tour Of Duty No. Security Station Tour Of Duty No. Of Hours Days Of Duties Shift 1 1 Gate Guard (entrance) 0600h - 1400h 8 Monday - Sunday 2 Gate Guard (exit/roving) 0600h - 1400h 8 Monday - Sunday Shift 2 1 Gate Guard (entrance) 1400h – 2200h 8 Monday - Sunday 2 Gate Guard (exit/roving) 1400h – 2200h 8 Monday - Sunday Shift 3 1 Gate Guard (entrance) 2200h – 0600h 8 Monday - Sunday 2 Gate Guard (exit/roving) 2200h – 0600h 8 Monday - Sunday 4. Operating Policies & Procedures 4.a. Duties & Responsibilities Of The Security Agency And Security Guards 4.a.) Security Service Contractor (ssc)/security Agency Shall: 1. Provide The Principal (sdo-albay) With Qualified And Trained Security Guards And Security Officers To, At All Times, Maintain Security And Safeguard The Building, Offices And Properties Within The Premises Of The Sdo, As Well As To Provide Protection To Its Officials, Employees, Visitors, Guests And Transacting Public; 2. Ensure, On Its Account, All Equipment Necessary For The Performance Of Its Obligations Under The Contract, Including The Items Stated Under D.2.b (minimum Requirements For Security Equipment); 3. Be Liable And Answerable To The Principal, For Damages Or Losses Within Its Premises And For Such Actions Which Directly Prejudice The Integrity, Efficiency, And Effectiveness Of The Principal, Its Operations And Its Officials And Employees Caused By Or Due To The Negligence And/or Misdemeanor Of The Ssc Personnel, But Not For Any Loss Or Damage Or Harm Due To Any Fortuitous Event, Force Majeure Or Causes Beyond The Control Of Ssc Personnel; 4. Ensure The Adequacy Of The Compensation And Benefits Of Its Guards And Submit To The Principal Its Monthly Or Quarterly Remittances On Various Contributions In Support To The Claims For Payout; 5. Assign One Head Security Guard Or Security Coordinator Who Shall Exercise The Tasks As Enumerated Under 4.a.1; 6. Provide The Principal With The 201 Files Of The Security Guards; 7. Retain And Exercise The Sole, Exclusive And Absolute Right To Suspend, Lay-off, Terminate And/or Impose Disciplinary Measures, Direct And Control Its Personnel And To Assign, Rotate And Re-assign Security Guards, Subject To The Approval Of A Duty Detail/schedule By The Office Of The Superintendent, Provided, That No Security Guard Shall Be Removed, Changed Or Transferred To Any Place Of Assignment Without Sufficient Notice To The Principal. The Schools Division Superintendent Shall Have The Right To Select, Change Or Refuse Any Security Guard Assigned. Duty Detail Order Of Every Assigned Security Guard Shall Contain, Among Others, The Following Information (section 5,2 Dole Department Order No. 150-16, S. 2016): 1. Name, Address, Active Telephone/contact Number & Email Address Of The Agency; 2. Issue Serial Number And Date Of The Duty Detail Order; 3. Complete Name And Designation Of Grantee; 4. Purpose; 5. Inclusive Dates Of Retail; 6. Firearms Description & License Number; 7. Authorized Uniform To Be Used; 8. Other Specific Instructions Or Remarks; And 9. Signature And Designation Of The Issuing Officer. 8. Not Withdraw Or Replace Any Security Guard Involved In Any Violation Of The Sdo’s Policies, Rules And Regulations Or Involved In Any Administrative Case Against Sdo Officials And Employees Until After Proper Investigation And Resolution Of The Case Have Been Made By The Sdo And Other Authorities Concerned. 9. Act Upon The Referred Concerns And Complaints Within 24-hours To The Satisfaction Of The Principal; 10. Submit Directly To The Office Of The Superintendent Such Weekly/monthly Incident Reports And Other Reports As May Be Required From Time To Time By The Principal. 11. As Part Of Its Bid, The Security Agency, Shall Submit An Undertaking To Pay Their Security Guards The Prescribed Benefits (section 7.2 Dole Department No. 150-16, S. 2016). 4.a.1) Officer-in-charge/security Coordinator 1. Act As Liaison With Deped, Sdo-albay And The Security Agency. 2. Has Over-all Responsibility Of The Members Of The Security Force. 3. Provide Guidance & Assistance To The Members Of The Security Force Assigned At Sdo-albay. 4. Monitor The Daily Operations Of The Security Force At Sdo-albay Installations. 5. Provide Leadership And Direction For The Security Guards. 6. Responsible To The Sdo-albay Management For The Implementation Of All Rules Regulations Relevant To Security Matters. 7. Monitor The Performance And Efficiency Of The Guards And Recommend The Relief Of Misfits. 8. Prepare And Submit Special Report/s Of Unusual Incidents, As Well As Guard Detail Order And Monthly Security Report And Conditions Of Secured Properties. 9. Advise Sdo-albay Officials Concerned Regarding Measures To Be Undertaken To Improve The Security Of The Building Premises. 10. Conduct Troop Information And Education To All Guards On A Regular Basis Or As The Need Arises. 11. Perform Other Duties As Sdo-albay And/or The Security Agency May Direct. 4.a.2) Entrance/exit Gate/parking Guards 1. Screen Visitors With Utmost Courtesy And Guide Them To The Office They Desire To Transact Business. Also Notify By Two-way Radio The Official Or Employee To Be Visited. 2. Issue Visitor’s Pass In Exchange Of A Current And Valid Government Issued Identification Card. 3. Advise All Visitors And Employees To Pin Their Ids While Inside The Building. 4. Inspect Thoroughly (metal Detector) All Bags, Packages And Attaché Case Hand-carried By Visitors. 5. Maintain A Logbook For Visitors And A Separate Logbook For Office Personnel. 6. Control Flow Or Traffic And Direct Drivers To Park Vehicles Properly In Designated Parking Areas. 7. Safeguard And Protect Parked Vehicles From Pilferage Of Accessories And Other Attachments. 8. Not Allow Sdo Vehicles To Leave The Compound Without Necessary Trip Ticket Duly Signed By The Authorized Signatory. 9. Maintain The Logbook On The Arrival And Departure Of Sdo Vehicles. 10. Submit To The Management, Thru The Office Of The Administrative Officer V Or The Supply And Property Section A Monthly Report On The Movement Of The Service Vehicles. 11. Control The Parking Of Vehicles Of Visitors To The Designated Parking Area. Employee’s Vehicles Shall Be Allowed Entry And To Park In The Designated Area For Privately Owned Vehicles. When Departing However, Their Vehicles Shall Be Subjected To Inspection. 12. Enforce The Established System Control Over The Removal Of Property And Materials From The Compound, As May Be Applicable. 13. Respond To Suspicious Activities Of Lawless Elements. 14. Enforce All Existing Sdo Security Rules And Regulations (to Be Discussed By The Office Of The Administrative Officer V (general Services). 15. Submit Reports Of Any Unusual Incidents. 16. Perform Other Duties As The Sdo And/or Security Agency May Direct. 4.a.3) Roving Guards 1. All Roving Guards Must Politely Guide, Check And Observe Situations Of Visitors/within Area Of Responsibility. 2. Guide Visitors To Their Office Destination. 3. Check And Prevent Unauthorized Persons From Loitering In The Corridors Or Entering Offices Without Official Business Or Transactions. 4. Prohibit Vendors Or Solicitors From Entering The Office During Office Hours. 5. Observe And Patrol Designated Perimeters, Areas, Structures And Activities Of Security Interest. 6. Apprehend Person Attempting Or Gaining Unauthorized Access To Restricted Areas And Those Committing Unlawful Acts. 7. Check Depositories, Rooms Or Buildings Of Security Interest Any Item, In Addition To The Normal Working Hours To Determine That They Are Properly Locked And Are Otherwise In Order. 8. Check All Office Equipment And Appliance Before Or After Office Hours. See To It That These Office Equipment And Appliances Are In Proper Places, And Then, Close/lock All Offices After Determining That Everything Is Secured. 9. Conduct Inventory Of Movable Equipment In The Office. 10. See To It That All Lights Are Switched Off And All Electrically Operated Equipment And Appliances Are Unplugged When Occupants Of An Office Are All Gone. 11. Impose All Existing Sdo Security Rules & Regulations. 12. Be Familiar With The Location Of The Fire-alarm System And Fire-fighting Equipment. Be Alert At All Times. 17. Submit Reports Of Any Unusual Incidents. 1. Perform Other Duties As The Sdo And/or Security Agency May Direct. 4.b. Compound/building Security Access System 4.b.1) Entry Of Packages 4.b.1.i) For Hand-carried Items: The Guard Shall:  Monitor By Using Metal Detector And Frisk Suspicious Looking People Of Deadly Weapon, Explosives, Contraband Items, Prohibited Drugs And Other Harmful Substances.  Inspect All Bags And Parcels To Ensure That No Deadly Paraphernalia Brought Inside The Compound.  Inspect The Surroundings For Suspicious Objects Which Do Not Belong To The Ground.  Require Individuals Possessing Firearms To Leave/deposit The Firearm To The Security Guard After Issuing A Deposit Slip.  Turn Over To The Nearest Police Station Individuals Who Are Found Possessing Deadly Or Other Harmful Materials And/properties.  Call The Recipient Of The Delivery Boxes To Confirm Whether Or Not He/she Is Expecting Delivery Boxes/properties. 4.b.1.ii) For Vehicles Of Visitors, Clients And Employees: The Guard Shall:  Maintain A Record Of Departure And Arrival Of Vehicle Within Client Premises. The Record Will Indicate The Plate Number, Time-in And Out, The Name Of The Driver And Company.  All Vehicles Entering The Compound Will Be Subject To Thorough Inspections. The Guard Will Require The Vehicle Owners To Open Its Compartment For Inspection, And If There Are Illegal Contraband Items On Board, Initiate Arrest.  Direct The Inward And Outward Flow Of Traffic And Apply Existing Parking Regulations.  Visitors Who Refuse To Subject His Vehicle For Inspection Shall Be Denied Entry.  The Guard At The Entrance Gate Must Be Equipped With The Under-chassis Mirror For Inspection Under The Vehicle. 4.b.2) Record Of Entry Of Packages The Guard Shall:  Maintain A Record Of Visitor’s Logbook Within Its Post. The Logbook Will Indicate The Name Of The Visitors, Company/residence Address, Purpose Of Visit, Signature And Time In/out.  Verified With The Recipient Of The Delivered Boxes If He Is Expecting Any Delivery. 4.b.3) Safekeeping Of The Deadly Weapon  Individuals Found In Possession Of Deadly Weapons Will Be Subject For Investigation. If He Is Authorized By Law, The Owner Will Deposit The Firearms/weapons To The Guard And The Duty Guard Will Issue A Deposit Slip Indicating The Name Of The Owner, Model, Type, Caliber Of Firearm, Date And Time In/out. When The Owner Needs To Leave The Compound He/she Must Surrender The Deposit Slip To The Guard To Retrieve His Weapons/firearms.  Individual In Possession Of Deadly Weapons Who Are Found Unauthorized By Law Will Be Apprehended And Turned Over To The Nearest Police Station. 4.b.4) Exit Of Packages/equipment Hand-carried Deped, Sdo-albay Property Brought Out Of The Compound Shall Be Accompanied With Property Pass Slip Signed By The Sdo Property Officer.  Guard Shall Deny The Pull-out Of The Sdo Property That Is Not Covered By Pass Slip.  Guards Must Inspect And Ensure That The Property Being Brought Out Are Indicted In The Property Slip Or Gate Pass. They Will Record The Name/kind Of The Equipment Including The Serial Number, Person Responsible, Time And Date. Sealed Boxes Brought Outside The Building/compound Will Be Required For Inspection. 4.b.5) Exit Of Vehicles  The Gate Guard Will Require The Owner Of Every Vehicle Intending To Leave The Area To Open Its Trunk Compartment. If Sdo Property Is Found On Board, Pass Slip Or Gate Pass Shall Be Required. 4.c. Maintain A List Of Sdo Officials Who Are Authorized To Issue Gate Pass (for Properties) 4.c.1) The Security Will Be Provided With A List Of Sdo Officials Who Are Authorized To Sign The Property Pass. The List Shall Contain The Signature Of The Authorized Individual Or His Duly Authorized Representative For Comparison With The Submitted Gate Pass Of The Concerned Party. 4.c.2) If The Gate Pass Is Found Suspicious, The Guard Shall Verify With The Signatory If He Issued Such Gate Pass To The Specified Person. 4.d Check Of Entry Of Individuals For Proper Indentification 4.d.1) Sdo Employees Shall Wear Their Ids All The Time. 4.d.2) Employees Without Id Cards Must Be Advised To Secure From The Office In-charge Of Id Printing. 4. D.3) Strict Implementation Of “no Id, No Entry” System On All Gates And Entrances Of The Sdo For Security Purposes Shall Be Imposed. 4.d.4) Visitors Are Required To Present/show Valid Identification, Such As School/office Id, Voter’s Id, Etc. Before Signing In On The Logbook. Then They Are Required To Leave Their Personal Id In Exchange Of Visitor’s Pass Which They Will Wear While Inside The Compound. 4.d.5) All Guards Shall Maintain A Logbook For Visitors. Logbook Must Be Kept In The Security Office, And Shall Be Made Available When Asked For Verification Purposes. 4.e Emergency Plan 4.e.1) Fire  In Case Of Fire, Responding Guard Shall Use Fire Extinguisher To The Base Of The Fire Until It Is Totally Covered.  If The Fire Cannot Be Stopped, The Guard Shall Immediately Initiate To Call The Nearest Fire Department.  Secure All Entrances And Exit Doors And Allow No One To Enter The Building Except Those Authorized.  All Emergency Exits Shall Be Opened.  Identify And Prepare Safe Place For Evacuation And For Temporary Use By The Victims.  Observe Any Suspicious Looking Individual Who Could Be A Possible Arson Suspect.  Record The Event Of Fire From Time To Time To Help The Investigators In Locating Possible Evidences. 4.e.2) Bomb Threats In The Case Of Bomb Threat, The Following Shall Be Done By The Security Guards Assigned:  Use Coded Messages, To Avoid Panic Among The Employees Inside The Building  Coordinate With The Local Law Enforcement Authorities, Call The Bomb Disposal Units And Inform The Fire Department.  Tighten Security Measures By Implementing Luggage Control And Body Frisking.  Evacuate People In The Nearby Places That May Not Be Reached By The Explosion.  If The Bomb Has Already Been Defused By The Experts, Search To Clear The Area Allowing Nobody To Enter The Place. 4.e.3) Typhoons  Observe The Surroundings And Detect Possible Danger From Fall Branches Or Any Object Place On A Higher Ground.  Check If The Water Reaches The Electric Outlets, If So, Inform The Administrative Officer V (general Services) For Appropriate Action.  Prepare All Emergency Lights For Possible Power Cut-off.  Monitor Radio News Report To Be Updated Of The Situation.  After The Typhoon, Request The Maintenance Personnel To Inspect All Electrical Lines Especially Plugs In The Lower Level For Possible Danger. 4.e.4) Earthquake  Guard On Post Must Immediately Assist To The Best Of His Ability To Protect And Evacuate To A Safer Area The Concerned Vips And Employees Of The Sdo.  Send Immediately Those Employees Hurt In The Course Of The Quake To The Nearest Hospital.  Search For Other Persons Left In The Building After Evacuation And Report All Damages In Properties And Injured Persons To The Drrm Coordinator..  Security Guards Shall Act As The First Responder For Basic Life Support And First Aid. 4.e.5) Theft/robbery  Upon Receiving A Compliant For Loss Of Properties, The Guard On Post Shall Prepare An Incident Report. 5. Other Services To Be Provided By The Security Agency Additional Administrative Services To Be Provided To The Sdo Free Of Charge: 1. Nightly Inspection Of The Guards On Post By The Designated Agency Inspectors. 2. Investigate Report On Security Agency Personnel Irregularities In Connection With Their Service/work, Including Investigation Of Reported Losses. This Task Is Handed By Agency Investigator Duly Accredited By The Philippine National Police (pnp) - Civil Security Group. 3. Other Security Gadgets/equipment Which The Sdo May Require To Meet Possible Future Needs. 2. The Department Of Education, Schools Division Office Of Albay Now Invites Bids For The Above-cited Procurement Opportunity. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders In The Amount Of Php 5,000.00 Pursuant To The Latest Guidelines Issued By The Gppb. Delivery Of Services Is Required By January 1, 2025 To December 31, 2025. Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Interested Bidders May Obtain Further Information From Department Of Education, Schools Division Office Of Albay, Bids And Awards Committee Office, And Inspect The Bidding Documents At The Address Given Below From Monday To Friday During Office Hours (8:00 Am To 5:00 Pm). 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 11 To January 3, 2024; 9:00 Am From The Address Below And Upon Payment Of Php 5,000.00 As The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity (www.depedalbay.com) Starting December 11, 2024 Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Department Of Education, Schools Division Office Of Albay Will Hold A Pre-bid Conference On December 18, 2024; 9:00 Am At 2f Lobby, Deped Sdo Albay, Ligñon Hill, Bogtong, Legazpi City, Which Shall Be Opened To Qualified Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before January 3, 2024; 9:00 Am. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb. Bid Opening Shall Be On January 3, 2024; 9:00 Am At 2f Lobby, Deped Sdo Albay, Ligñon Hill, Bogtong, Legazpi City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 8. Prospective Bidders Are Strongly Encouraged To Order Or Download The Electronic Copy Of The Bidding Documents From The Philgeps Website, For Them To Be Included In The Document Request List Of The Project. The Bidding Documents May Be Viewed Also At The Deped Sdo Albay Schools Division Office Website: Www.depedalbay.com. 9. The Department Of Education, Schools Division Office Of Albay Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. For Further Information, Please Refer To: Jade O. Alberto Education Program Supervisor Bac Secretariat Head-designate Office Of The Bids And Awards Committee 2nd Floor, Deped Sdo Albay, Ligñon Hill, Bogtong, Legazpi City Tel.no.: 052-204-8535 11. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.depedalbay.com December 10, 2024 (sgd.) Bernie C. Despabiladero, Edd Assistant Schools Division Superintendent Bac Chairperson For Goods And Consulting Services

Details: Description Request For Quotation Mode Of Procurement: Small Value Procurement Date: _____________ Pr No.: _____________ Rfq No.: _____________ Company/business Name: Complete Office Address: Business/mayor’s Permit No: Tin: The Research Institute For Tropical Medicine – Department Of Health, Through Its Bids And Awards Committee (bac), Intends To Procure The Below Mentioned Items Through The Above-mentioned Mode Of Procurement Based On The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184. Please Quote Your Best Offer For The Item/s Described Herein, Subject To The Terms And Conditions Provided On This Request For Quotation (rfq). Submit Your Quotation Duly Signed By You, Or Your Duly Authorized Representative Within Five (5) Days Which Shall Be Addressed To The Ritm Bids And Awards Committee. A)the Following Documents Are Required To Be Submitted Along With Your Formal Quotation: Documentary Requirement Remarks Valid And Current Mayor’s/business Permit In Case Not Yet Available, You May Submit Your Expired Mayor’s Or Business Permit With The Official Receipt Of Renewal Application. However, A Copy Of The Latest Mayor’s Or Business Permit Shall Be Required To Be Submitted After Award Of Contract But Before Payment. Valid And Current Certificate Of Platinum Membership With Valid Annex “a” May Be Submitted In Lieu Of The Mayor’s/business Permit Philgeps Registration/membership Bir Form 2303 Company Name Registered In Sec/dti/cda Must Be The Same Registered Name In Bir Form 2303. B)the Following Documents Shall Be Submitted By The Bidder Before The Issuance Of Notice Of Award: Documentary Requirement Remarks Duly Notarized Revised Omnibus Sworn Statement (10 Provisions) With Latest Rules On Notarial Practice Applicable For: Np-svp With Abcs Above P50,000.00 And Np-ec With Abcs Above P500,000.00 Note: Othe Pr # Shall Be Reflected In The Omnibus Sworn Statement Oone (1) Original Copy Must Be Submitted Othe Issuance And Notarial Date Of The Omnibus Sworn Statement Shall Be The Same/after The Issuance And Notarial Date Of The Authority Of The Signatory. Othe Authorized Representative Declared In The Omnibus Sworn Statement Shall Be In Congruent With The Submitted Authority Of The Signatory. Authority Of The Signatory Applicable For: Np-svp With Abcs Above P50,000.00 And Np-ec With Abcs Above P500,000.00 for Sole Proprietorship – Duly Notarized Special Power Of Attorney, If Signatory Is Other Than The Owner for Corporation – Duly Notarized Secretary’s Certificate for Partnership, Cooperative, Or Joint Venture – Duly Notarized Board/partnership Resolution, Whichever Is Applicable Note: Othe Pr # Shall Be Reflected In The Authority Of The Signatory Oone (1) Original Copy Must Be Submitted Othe Issuance And Notarial Date Of The Authority Of The Signatory Shall Be The Same/shall Come First Before The Issuance And Notarial Date Of The Omnibus Sworn Statement. Note: Incomplete Submission Of The Required Documents Will Be A Ground For Disqualification. For Any Clarification, You May Contact Us At The Contact Information Provided: Mae Marie E. Hernandez Bac Secretariat Head (632) 8807-2628 To 32 Loc. 210 And/or 240 E-mail Address: Procurement@ritm.gov.ph / Procurement_02@ritm.gov.ph Website: Www.ritm.gov.ph Instructions: Note: Failure To Follow These Instructions Will Disqualify Your Entire Quotation. (1)do Not Alter The Contents Of This Form In Any Way. (2)the Use Of This Rfq Is Highly Encouraged To Minimize Errors Or Omissions Of The Required Mandatory Provisions. If Another Form Is Used Other Than The Latest Rfq, The Quotation Shall Contain All The Mandatory Requirements/provisions Including Manifestation On The Agreement With The Terms And Conditions Below. (3)all Technical Specifications Must Be Complied With. Failure To Comply With The Mandatory Requirements Shall Render The Quotation Ineligible/disqualified. (4)quotations May Be Submitted Through Electronic Mail At: Procurement@ritm.gov.ph / Procurement_02@ritm.gov.ph. (5)quotations, Including Documentary Requirements, Received After The Deadline Shall Not Be Accepted. For Quotations Submitted Via Electronic Mail, The Date And Time Of Receipt Indicated In The Email Shall Be Considered. Terms And Conditions: bidders Shall Provide Correct And Accurate Information Required In This Form. any Interlineations, Erasures, Or Overwriting Shall Be Valid Only If They Are Signed Or Initialed By You Or Any Of Your Duly Authorized Representative/s. price Quotation/s, To Be Denominated In Philippine Peso, Shall Include All Taxes, Duties, And/or Levies Payable – If Applicable. quotations Exceeding The Approved Budget For The Contract Shall Be Rejected. in Case Of Two Or More Bidders Are Determined To Have Submitted The Lowest Calculated Quotation/lowest Calculated And Responsive Quotation, The Ritm-bac Shall Adopt And Employ “draw Lots” As The Tie-breaking Method To Finally Determine The Single Winning Provider In Accordance With Gppb Circular 06-2005. award Of Contract Shall Be Made To The Lowest Quotation Which Complies With The Technical Specifications, Requirements And Other Terms And Conditions Stated Herein. payment Shall Be Made After Delivery And Upon The Submission Of The Required Supporting Documents, I.e., Order Slip And/or Billing Statement, By The Supplier, Contractor, Or Consultant. Our Government Servicing Bank, I.e., The Land Bank Of The Philippines, Shall Credit The Amount Due To The Identified Bank Account Of The Supplier, Contractor, Or Consultant Not Earlier Than Twenty-four (24) Hours, But Not Later Than Forty-eight (48) Hours, Upon Receipt Of Our Advice. Please Note That The Corresponding Bank Transfer Fee, If Any, Shall Be Chargeable To The Account Of The Supplier, Contractor, Or Consultant. liquidated Damages Equivalent To One-tenth Of One Percent (0.1%) Of The Value Of The Goods Not Delivered Within The Prescribed Delivery Period Shall Be Imposed Per Day Of Delay. Ritm May Terminate The Contract Once The Cumulative Amount Of Liquidated Damages Reaches Ten Percent (10%) Of The Amount Of The Contract, Without Prejudice To Other Courses Of Action And Remedies Available To The Procuring Entity. Technical Offer/proposal: After Having Carefully Read And Accepted The Instructions And Terms And Conditions, I/we Submit Our Technical Proposals/quotations For The Item/s As Follows: Item # Qty/ Unit Item Description Supplier’s Compliance (indicate Brand And/or Model, Including Complete Specifications To Be Offered - Applicable) 1 1/unit Set Of Six (6) Units, Temperature Data Logger With External Temperature Probe Technical Specification: Equipment Specification: ▪measuring Parameter: Temperature And Humidity ▪measurement Range: -30°c To 70°c ▪temperature Accuracy: ±0.3°c (-20°c To 40°c); ±0.5°c (other Range) ▪temperature Resolution: 0.1°c ▪humidity Measurement Range: 10% To 90% Rh ▪humidity Accuracy: ±3% Rh (20% To 80%); ±0.5% Rh (other Range) ▪battery: 2 Years (stored And Used Under Normal Conditions/3.6 V Lithium, Battery ▪temperature Probe: Removable External Temperature Probe ▪logging Interval: 10 Seconds To 24 Hours ▪sensor Type: Internal And External Temperature And Humidity Sensors ▪memory: 16,000 Points (max) ▪start Mode: By Button Or Software ▪stop Mode: By Button, Software Or Stop When Full ▪alarm Threshold: Up To 3 High Limits And 2 Low Limits (temperature); One (1) High Limit And One (1) Low Limit (humidity) ▪alarm Type: Single, Cumulative ▪data Transmission: Usb Port ▪ Report Type: Pdf Format ▪data Encryption: Set Password To Ensure Data Security ▪ Protection Grade: Ip65 ▪ Must Fit Area No More Than (l X W X H) (mm): (103mm X 46mm X 19mm) Inclusions: ▪six (6) Additional 3.6v Single Lithium Battery General Conditions And Requirements Which Shall Be Submitted During Submission Of Bids Or During Submission Of Post-qualification Documents, As Part Of The Technical Specifications Of The Project: 1.calibration Upon Delivery 2.three Years Warranty 3.free Calibration And Preventive Maintenance Within The Warranty Period Financial Offer/proposal: Please Quote Your Best Offer For The Item/s Below. Please Do Not Leave Any Blank Items. Indicate “0” If Item Being Offered Is For Free: Item # Qty/ Unit Item Description Abc Price Proposal Unit Cost Price Proposal Total Cost 1 1/unit Set Of Six (6) Units, Temperature Data Logger With External Temperature Probe Technical Specification: Equipment Specification: ▪measuring Parameter: Temperature And Humidity ▪measurement Range: -30°c To 70°c ▪temperature Accuracy: ±0.3°c (-20°c To 40°c); ±0.5°c (other Range) ▪temperature Resolution: 0.1°c ▪humidity Measurement Range: 10% To 90% Rh ▪humidity Accuracy: ±3% Rh (20% To 80%); ±0.5% Rh (other Range) ▪battery: 2 Years (stored And Used Under Normal Conditions/3.6 V Lithium, Battery ▪temperature Probe: Removable External Temperature Probe ▪logging Interval: 10 Seconds To 24 Hours ▪sensor Type: Internal And External Temperature And Humidity Sensors ▪memory: 16,000 Points (max) ▪start Mode: By Button Or Software ▪stop Mode: By Button, Software Or Stop When Full ▪alarm Threshold: Up To 3 High Limits And 2 Low Limits (temperature); One (1) High Limit And One (1) Low Limit (humidity) ▪alarm Type: Single, Cumulative ▪data Transmission: Usb Port ▪ Report Type: Pdf Format ▪data Encryption: Set Password To Ensure Data Security ▪ Protection Grade: Ip65 ▪ Must Fit Area No More Than (l X W X H) (mm): (103mm X 46mm X 19mm) Inclusions: ▪six (6) Additional 3.6v Single Lithium Battery General Conditions And Requirements Which Shall Be Submitted During Submission Of Bids Or During Submission Of Post-qualification Documents, As Part Of The Technical Specifications Of The Project: 1. Calibration Upon Delivery 2. Three Years Warranty 3.free Calibration And Preventive Maintenance Within The Warranty Period 160,800.00 Delivery Period: Thirty (30) Calendar Days Total Offered Quotation In Words: ______________ In Figures: ______________ Price Validity: ________________ Payment Terms: Thirty (30) Calendar Days Payment Details: Banking Institution: _________________________________________________ Account Number: __________________________________________________ Account Name: _________________________________________________ Branch: _________________________________________________ Note: Only The Actual Amount Of The Accepted Items Shall Be Paid. ___________________________ Signature Over Printed Name Of Authorized Representative ___________________________ Position/designation ___________________________ Office Telephone/fax/mobile Nos. ___________________________ Email Address/es

Details: Development Of Hindu Smashan Bhumi Area At Guljarpura In P No 09 Akola 19) Construction Of Tar & Cc Road At Fadke Nagar From Shri Chopale Complex To Dr. Shri Anant Shravangi To Shri Rande Saheb To Shri Pavar Saheb To Shri Sarag Japulkar Cc Road & Tar Road At Fadke Nagar From Shri Maniram Bhau Tale To Shri Jadhao Kaka Hanuman Mandir Road, At Wankhade Nagar Shri Deshmukh Kirana To Shri Chintvar Saheb To Shri Santosh Chitode To Shri Kale Saheb,rk Chowk To Shri Nanudasji Bhirad Tar Road In P No 9 20) Construction Of Cc Road With Widening From Ashish Gawande To Shri Gajanan Watika And Sanjay Upshyam To Kiran Udgirkar At Godbole Plot , P.no. 10 21) Construction Of Nalla From Adv. Takavale To Kotarwar Beside Balapur Road At Shivnagar ,p.no. 10 22) Construction Of Cc Road From Chittalwar To Thakare At Indira Colony, Dr. Kothari Hosp To Thatange House At Shivaji Nagar, And Construction Of Pavers Infront Of Sai Mandir At Sai Peth , P.no. 10 Construction Of Compound Wall With Gate At Hanuman Mandir ,godbole Plot ,p.no. 10 23) Construction Of Compound Wall With Gate At Hanuman Mandir ,godbole Plot ,p.no. 10 24) Construction Of Cc Road With Pavers From Sawarkar To Joshi ,at Renuka Nagar , P.no. 10 25) Construction Of Cc Road With Widening From Shri Sudhir Deshpande To Lande Guruji At Godbole Plot , P.no. 10 26) Construction Of Cc Road Infront Of Passport Office Infront Of Savatram Mill Tajnapeth Post Office ,in P.no. 11 27) Construction Of Cc Road Adjoining Passport Office To Ramesh Puri Hotel To Aruna Tea House, Infront Of Savatram Mill Tajnapeth Post Office ,in P.no. 11 28) Construction Of Cc Road Infront Of Omkar Appa Dehankar's Shop To Advocate Pancholi's House At Malipura ,in P.no. 11 29) Construction Of Tar Road From Shrikrushna Printer To Old Cotton Market Main Road At Khetan Jin In P.no.11 30) Construction Of Cc Culvert At Malipura Chowk Telipura Road Near Chowrasiya Medical In P.no. 11 31) Construction Of Cc Road From Gandhi Chowpati Shah Medical To Mata Mandir Main Road In P.no. 11 32) Construction Of Cc Nalla From Santoshi Mata Chowk To P.n.enterprizes To India Motor Shop To Hanman Mandir To Public Toilet In P.no.11 33) Construction Of Cc Drain And Cover Of Ganpati Viserjan Marg From Oswal Bhavan Culvert Futanwala To Sadhuram Tolaram Jin And Fixing Steel Cover Near Dana Bazar Infront Of Jain Mandir In P.no.11 34) Construction Of Nallah (coming From Ambedkar Nagar) From 33 Kv Electric Substation Behind Iti College To Azhar Hussain College, Ratanlal Plot Road In P.no.12. 35) Construction Of Tar Road From Dr Dhawale Hospital To Khan Forte At Patrakar Colony, New Bus Stand Road In P.no. 12. 36) Construction Of Drain From Officers Club Lane (vishwakarma Bunglow) To Collector's Residence, Civil Line Road In P.no.12. 37) Construction Of Bridge & Protection Wall To Nala Near Balaji Mall With Road Widening At Kholeshwar Road In P.no.12. 38) Construction Of Nallah From Shri Lohakpure To River,at Anikat Square, Kholeshwar Road In P.no.12.76) Construction Of Cc Drain From Ramaai Appartment To Shivraj Appartment At Om Housing Society In P No 15 77) Construction Of Cc Road From Shri Sapkal House To Shri Kulkarni House At Vijay Housing Society In P No 15 78) Construction Of Tar Road From B T Deshmukh House To Kulsundar House At Vijay Housing Society In P No 15 79) Construction Of Tar Road From Divakar Gawande To Shri Chaube House In P No 15 80) Construction Of Tar Road From Ddr Office To Bobade Dairy In P No 15 81) Construction Of Cc Road From Shri Shah To Mundada To Sayani House At Vidya Nagar In P No 15 82) Construction Of Tar Road From Kedia House To Sindur Next Appartment In P No 15 83) Construction Of Cc Drain From Ratnaparkhi House To Aamale House At Nagar Parishad Colony In P No 15 84) Construction Of Cc Road Rammai Appartment (infront Of Jagdamba Mata Mandir) To Shivraj Appartment At Om Housing Society In P No 15 85) Construction Of Chainlink Fencing Compound To Open Space At Vijay Housing Society In P No 15 86) Construction Of Cc Approach Road Gaurakshan To Vidya Nagar From Shri Varhade Sir To Shreeji Heights At In P No 15 87) Construction Of Compound Wall And Providing And Fixing Open Gym Equipments Near Kunbi Samaj Mandal Open Space In P.no.15 88) Providing And Fixing Open Gym Equipments At Harish Ashwini Colony Open Space In P.no.15 89) Construction Of Cc Drain From Shrimati Kiran Praful Kale House To Kulswamini Mangal Karyalay To Rahul Sawaji Appartment To Chakradhar Appartment In P No 15 90) Construction Of Cc Drain Behind Greenland Hotel Goldenpam Appartment To Kothari To Navalseth Jain House At Vidya Nagar In P No 15 91) Construction Of Cc Compound And Fixing Paving Block At Kailash Tekdi Babaji Math In P No 16. 93) Construction Of Tar Road From Shri. Shashikant Tiwari House To Khandelwal Duplex To Shri. Sharma House Near Nisarga Park Main Road , In P.no. 18 94) Construction Of Tar Road From Shri. Sidhara House Tulshan House To Shri. Ravi Patel House And Shri. Nareshkumar Ganatra House To Shri. Bilala House At Geeta Nagar , In P.no. 18 95) Construction Of Sabhagruh In Front Of Kisanpuri Maharaj Mandir At Old Hingna In P.no 18 96) Construction Of Chain Link Compound Wall At Ch. Shivaji Maharaj Statue At Somthana In P.no. 18 97) Construction Cc Road From Shri. Sharma House To Shri. Shetre Sir House At Emrald Colony In P.no 18 98) Construction Cc Road With Culvert Near Maharana Pratap Chowk At Shivsena Vasahat In P.no 18 99) Construction W.b.m Road With Drain From Auto Stop To Shri. Dubey H. To Main Nalla At Shivsena Vasahat In P.no 18 100) Construction Cc Road From Shri. Kacholiya House To Shri. Gwalani House At Geeta Nagar In P.no 18 101) Providing & Fixing Pavers From Biyani Foods To Shani Maharj Mandir And Jalaram Socity To App. At Geeta Nagar, In P.no. 18 102) Construction Cc Drain From Gurushrichand App. To Shri. Gandhi House To Shri. Balu Asware House At Geeta Nagar In P.no 18 103) Providing & Fixing Pavers From Shri. Joshi House To Shri. Pancholi House At Geeta Nagar, In P.no. 18 104) Construction Cc Road With Drain 1) Shri. Dilip Shinde House To Shri. Sagar Jamode H. 2) Neeta Gomase H. To Shri. Santosh Kharate House 3) Shri. Pawan Thakre H. To Shri. Ranjeet Bendre H. 4) Kailash Kirana To Shri. Dinkar Leknar H. 5) Shri. Sanjiv Navthale To Pooja Mapari 6) Bhatkar Kirana To Shri. Sanjay Ketkar House At Shivsena Vasahat In P.no 18 105) Construction Cc Road From Shri. Lakshman Farkade House To Shri. Vasudev Sarode House At Somthana In P.no 18 145) Construction Cc Nalla From Pkv To Shri. Kanojiya House To Nisarga Park App. At Geeta Nagar In P.no 18 106) Construction Of Cc Nalla From Shri Patil House To Shri Kishor Kale House At (lahariya Nagar) In P.no.19 109) Construction Of Cc Road From Dahake House To Shrinath House At Dreamcity In P.no. 19 110) Construction Of Cc Road From Dhore House To Bambatkar House At Sandhya Colony In P.no. 19 111) Construction Of Tar Road From Shri Tembhe To Sapkal And Shri Dahale To Jogi House At Dreamland City In P.no.19 112) Construction Of Cc Drain From Shri Dhote House To Shri Hanumate House At Rajeshwar Nagar In P.no.19 113) Construction Of Tar Road From Shri Chikte House To Shri Sharma House At Gayatri Nagar In P.no.19 114) Construction Of Tar Road From Shri Gyaral To Ingale House At Gayatri Nagar In P.no.19 115) Construction Of Cc Drain From Shri Damodar Ade To Shri Chavhan House At Banjara Nagar In P.no.19 116) Construction Of Cc Drain From Shri Subhash Chavhan To Shri Ramdhan Ade House At Banjara Nagar In P.no.19 117) Construction Of Cc Drain From Shri Rathod To Shri Waman Rathod House At Banjara Nagar In P.no.19 118) Construction Of Cc Drain From Shri Mankar House To Shri Kashiram Daberav House Near School Of Scholar In P.no.19 119) Construction Of Bridge And Railing At Balode Layout Near Ram Mahalle House In P.no.19 120) Construction Of Chainlink Fencing At Kaulkhed Smashanbhumi In P.no. 19 121) Construction Of Cc Drain From Shri Sakhar Pohe House To Shri Pappu Chavhan House (gayatri Nagar) In P.no.19

Details: Description "republic Of The Philippines Province Of Negros Oriental City Of Bayawan" Bids And Awards Committee Bid No.: Itb 24-313 Date.: 05.dec.2024 Invitation To Bid Sealed Bids For Quotation Of Prices Will Be Recieved For The Purchase Of The Following Supplies, Materials And Equipment Of The Government To Be Opened On The Date, Place, And Time Stated In Instruction To Bidders. Item No. Qty Unit Articles Brand "unit Price" Total Lot No. I Aggregates 1 30 Cu.m. Sand, Washed Mixing/screened 2 30 Cu.m. Gravel, Mixing Crushed Screened And Washed Max. Size 20mm Dia 3 20 Cu.m. Boulders, (150mm Dia - 200mm Dia) Lot No. Ii Bar And Rebar 4 52 Length Angle Bar, 6mm X 50mm X 50mm X 6m) 5 50 Length Angle Bar, 4.5mm X 25mm X 25mm X 6m 6 10 Length Flat Bar, 4mm X 38mm X 6m 7 10 Length Round Bar, Plain, 10mm Diameter X 6.0m 8 50 Length Square Bar, 12mm X 6m 9 300 Length Deformed Steel Bar, 10mm Dia X 6m, Grade 275 10 30 Length Deformed Steel Bar, 12mm X 6m, Grade 275 Lot No. Iii Cement And Additives 11 500 Bag Cement, Portland (40kgs/bag), Type 1 Lot No. Iv Gas And Gases For Oxygen And Acetylene Only 12 5 Tank Oxygen Gas, Refill; (1600 Psi - 1800psi); Kilograms Per Tank 13 2 Tank Acetylene Gas , Refill Lot No. V Masonry Supplies 14 3000 Piece Hollow Block, Concrete, 10cm X 20cm X 40cm Lot No. Vi Commercial Lumber 15 50 Piece Lumber, G-melina Mahogany And Equivalent 50mm X 50mm X 2.4m 16 26 Piece Lumber, G-melina Mahogany And Equivalent 50mm X 50mm X 3.6m 17 54 Piece Lumber, G-melina Mahogany And Equivalent 50mm X 75mm X 3.6m 18 22 Piece Commercial Lumber, G-melina, Mahogany And Equivalent, 50mm X 75mm X 3.0m Lot No. Vii Personal Protective Equipment 19 30 Piece Gloves, Rubber & Cloth Combination For Construction 20 10 Pair Boots, Rain, Rubber Mens Size: 8 21 20 Pair Boots, Rain, Rubber Mens Size: 7 22 13 Piece Hard Hat, High Quality And Heavy Duty For Industrial/construction, Safety Helmet, Uv-resistant, Hdpe, Ce En397, W/ Chin Strap, Blue 23 8 Piece Hard Hat, High Quality And Heavy Duty For Industrial/construction, Safety Helmet, Uv-resistant, Hdpe, Ce En397, W/ Chin Strap, Yellow 24 2 Piece Hard Hat, High Quality And Heavy Duty For Industrial/construction, Safety Helmet, Uv-resistant, Hdpe, Ce En397, W/ Chin Strap, White Lot No. Viii Roof, Wall And Ceiling Supplies 25 91 Sheet Corrugated Sheet, G.i. 0.27mm X 3.60m 26 91 Sheet Corrugated Sheet, G.i. 0.27mm X 3.0m) 27 15 Sheet Gi Plain Sheet, 0.30mm X 0.9m X 2.4m 28 80 Length C-purlins, 1.0mm X 50mm X 100mm X 6.0m Lot No. Ix Paints, Tools And Supplies 29 20 Gallon Urethane Paint (gal), 30 5 Gallon Paint, Urethane (thalo Blue Or Equivalent) 31 10 Gallon Paint Primer, Epoxy W/ Catalyst (gal Black 32 10 Piece Paint Brush, 100mm (4"), Hair Type 33 12 Piece Baby Paint Roller, 4 Inches, With Handle, Cloth 34 3 Gallon Paint , Urethane, Top Coat Clear 35 5 Can Urethane Thinner, 3.75lit/can 36 5 Can Lacquer Thinner, 3.75 (liter/can) 37 5 Gallon Body Filler, W/ Hardener Lot No. X Plumbing Supplies 38 16 Length Gi Pipe, 100mm Dia X 6m Sched 40 Wt=4.0mm Outside Dia= 114.3 10.880kg/m Light Gauge 39 30 Length Gi Pipe 25mm Dia X 6m, Sched 40 Wt=2.6mm Outside Dia= 33.040 1.975kg/m Light Gauge 40 10 Length Gi Pipe, 32mm Dia X 6m Sched 40 Wt=2.8mm Outside Dia= 42.20 2.720kg/m Light Gauge 41 20 Length Gi Pipe, 15mm Dia X 6m Sched 40 Wt=2.0mm Outside Dia= 21.30 0.952kg/m Light Gauge 42 4 Piece Faucet, Stainless, 20mm Outside Dia, One Way Type (on/off), Good Quality 43 2 Piece Floor Drain, 100mm X 100mm Dia Stainless 44 3 Piece Pvc Clean-out, 107.10mm Dia W/ Cover 45 15 Piece Coupling, Upvc, 20mm Inside Dia, One End Treaded, Blue 46 3 Piece Pvc Tee, Sanitary, Inside Dia: 107.10mm, S-1000, Orange 47 20 Length Elbow, Upvc, 20mm Inside Dia X 90 Deg. Bend, One End Threaded, Blue 48 4 Piece Pvc Elbow, 107.10mm Inside Dia X 45 Deg. Bend Orange 49 2 Set Toilet Bowl, Porcelain W/ Flush 50 2 Roll Tape, Thread Seal, 20mm X 10m 51 4 Length Pvc Pipe, 107.10mm Outside Dia X T=3.81mm X L=3.0m Orange 52 2 Piece Coupling, Pvc, 107.10mm Inside Dia, S-1000, Orange 53 10 Piece Pvc Wye, 107.10mm Dia Orange 54 10 Length Pipe, Upvc, 20mm Outside Dia, Wt=1.8min, L=3.0m, Blue, With Hub 55 15 Piece Upvc Tee, 20mm Dia Blue Lot No. Xi Steel Sheets And Mesh 56 18 Roll Steel Matting, 50mm X 50mm Eyehole 1.2m Width 3.5mm Wire Dia (6m/roll)) 57 20 Linear Meter Screen/mesh Wire, 3mm Eyehole X 0.90m Width (m) 58 35 Piece Plastic Matting, Interlocking Design, Heavy Duty, 1 Ft X 3 Ft Lot No. Xii Carpentry Tools And Supplies 59 5 Box Rod/electrode, Welding, E6013, 1/8" (bx)) (matchless Quality, Iso 9001, 2000 Certified, 20 Kg/box) 60 30 Piece Grinding Disc , Wheel Stone, 4", 110mmx22mm, Iso 9001 61 50 Piece Cutting Disc, 105 X 1.0 X 16mm For Metal 62 110 Piece Blade, Hacksaw, 12mm X 300mm, 18tpi, (excellent Quality) 63 50 Kilo Tie Wire, # 16 64 10 Kilo Nails, Common Wire 38mm 65 15 Kilo Nails, Common Wire, 50mm (2") 66 10 Kilo Nails, Common Wire, 62mm 67 10 Kilo Nails, Common Wire, 100mm (4") 68 20 Sheet Plywood, Marine 5mm X 1.2m X 2.4m, Type I, Grade A/a 69 3500 Piece Tex Screw, 63mm For Steel 70 50 Piece Sand Paper, #80, 225mm X 275mm 71 50 Piece Sand Paper, # 220 72 60 Piece Sand Paper, #120, 225mm X 275mm *** Nothing Follows *** Issuance Of Bid Documents: December 10, 2024 To December 27, 2025@ 5:00 P.m. Pre-bid Conference: December 17, 2024@ 9:00 Am Deadline/opening Of Bids: January 2, 2025@ 9:00am Grand Total: Place Of Delivery: Fob Bayawan, City Warehouse Form And Amount Of Bid Security I Hereby Certify That The Above Articles Are Equally Carried In Stock By Me In Quantities Above Sstated Except Those Marked "none". Terms And Conditions Specified In The Annex Of This Are Herein Accepted. The Quantity Shown And Prices As Quoted Are Hereby Offered. Name Of Business/company Address/contact Number Signature Over Printed Name Evaluation: Bids And Awards Committee Virginia D. Sadiasa, Chairman Corazon P. Lirazan, Member Saturnino T. Dayanan, Vice Chairman Nefredo Camilo A. Villarubia, Member Wilfredo C. Tuale, Member Ernest N. Dinoipol, Member

Details: Description Request For Quotation Rfq No. : Owd-rfq-2024-028 Rfq Date : December 20, 2024 Place Of Delivery : Obando Water District 004 P. Sevilla St., Catanghalan, Obando, Bulacan Date Of Delivery : Within Seven (7) Days Upon Receipt Of P.o. Approved Budget Of The Contract (abc) : Five Hundred Eighty-three Thousand Six Hundred Fifty-seven And 50/100 (php583,657.50) Pr No. : Owd-pr-2024-028 Bid Validity : Quotations Shall Be Valid Until March 31, 2025 Sir/madam, Please Quote Us Your Government Price/s For The Item/s Listed Below Not Later Than January 2, 2025, 4:00 Pm. Kindly Submit As Well Documentary Requirements, As Follows: 1. Mayor’s/business Permit 2. Philgeps Registration Number/certificate 3. Department Of Trade And Industries (dti) Certificate Of Business Registration/ Securities And Exchange (sec) Registration 4. Bir Certification Of Registration For Any Clarification, You May Contact Us At Telephone No. (02) 8367-7081 Or Email Address At Obandowd@yahoo.com. Very Truly Yours, Eric Joseph M. Avena Bac Secretariat Item No. Qty Unit Item Description Brand Unit Price (vat Inclusive) Total (vat Inclusive) 001 20 Pcs Coco Lumber 2x3x10 *for Scaffolding And As Form 002 2 Pcs Marine Plywood ¼” *5mm Thickness For Concrete Form 003 6 Kgs Cwn #4 *round Head And Diamond Point 004 6 Kgs Cwn #3 *round Head And Diamond Point 005 4 Kgs Cwn #2 *round Head And Diamond Point 006 2 Kgs Cwn #1 * Round Head And Diamond Point 007 6 Kgs Concrete Nail, #4 *for Concrete 008 3 Kgs Concrete Nail, #3 *for Concrete 009 2 Box Thhn Wire, #12 *stranded 010 7 Pcs 3-gang Switch (waterproof) *waterproof High Quality Switch Set 011 18 Pcs 2-gang Universal Outlet (waterproof) *waterproof & High Quality Outlet 012 14 Pcs Amco Box *matte Finish Abs Plastic 013 22 Pcs Junction Box With Cover (ceiling) *high Quality Polyvinyl Chloride (pvc) 014 10 Pcs Electrical Tape *resist High Voltages *tolerate Wide Temperature Variances 015 6 Pcs Led Ceiling Light 40 Watts *energy Saving & Long Lifetime 016 12 Pcs Electrical Pvc Pipe ½” *as Per Nec 352 017 12 Pcs Electrical Pvc Coupling ½” *as Per Nec 352 018 12 Pcs Electrical Pvc Elbow ½” *as Per Nec 352 019 12 Pcs Electrical Pvc End Bell ½” *as Per Nec 352 020 2 Pcs Circuit Breaker 30 Amp *rated Voltage:ac230/400v, 50/60hz *mechanical Life: 10000 Times 021 1 Pcs Circuit Breaker 20 Amp *rated Voltage:ac230/400v, 50/60hz *mechanical Life: 10000 Times 022 30 Pcs Hdpe Conduit ¾” (black) *flexible, Durable Material 023 5 Pcs Solar Street Light 120 Watts With Motion Detection *ip 65 Waterproof Rating *outdoor Led Light 024 80 Pcs Hollow Blocks #4 *for Exterior Wall *heavy Duty 025 6 Bags Cement *portland Cement, 40 Kg Bag 026 0.5 Cu.m Sand *fine 027 6 Pcs Deformed Steel Bars #10 *astm A615 *hot Rolled Deformed Bar Grade-40 028 1 Kgs Tie Wire *gauge #16 029 400 Pcs H0llow Blocks #5 *for Exterior Wall *heavy Duty 030 53 Bags Cement *portland Cement, 40 Kg Bag 031 5.5 Cu.m Sand *fine 032 2 Cu.m Gravel *crushed Stone *20mm In Size 033 30 Pcs Deformed Steel Bars #10 *astm A615 *hot Rolled Deformed Bar Grade-40 034 15 Pcs Deformed Steel Bars #12 * Astm A615 *hot Rolled Deformed Bar Grade-40 035 14 Pcs Deformed Steel Bars #16 *astm A615 *hot-rolled Deformed Bar Grade-40 036 2 Kgs Tie Wire *gauge #16 037 12 Pcs Machine/ Anchor Bolt 16 Mm *thread Pitch 2.0mm P. *high Tensile 038 10 Bags Cement *portland Cement, 40 Kg Bag 039 1 Cu.m Sand *fine 040 95 Bags Cement *portland Cement, 40 Kg Bag 041 6 Cu.m Sand *fine 042 11 Cu.m Gravel *crushed Stone *20mm In Size 043 80 Pcs Deformed Steel Bars #10 *astm A615 *hot-rolled Deformed Bar Grade-40 044 4 Kgs Tie Wire *gauge #16 045 52 Cu.m Backfill Materials *natural Soil *free From Rocks, Wood, Or Other Unsuitable Material 046 84 Pcs Angular Bar 2” X 2” (3.5mm) *6m Long Black Iron 047 15 Pcs Angular Bar 1 ½” X 1 ½” (3.5mm) *6m Long Black Iron 048 42 Pcs Tubular Steel 2x2 (1.5mm) *square, Galvanized Steel 049 3 Pcs Tubular Steel 2x3 (1.5mm) *square, Galvanized Steel 050 8 Pcs C-purlins 2x6 (1.5mm) *galvanized Steel 051 9 Pcs G.i. Pipe 4” Schedule 40 *zinc Coated, Plain End Steel Pipe 052 4 Pcs G.i. Pipe 3” Schedule 40 *zinc Coated, Plain End Steel Pipe 053 50 Pcs Cutting Disc *for Metal 054 2 Pcs Cut-off Cutting Disc 14” *for Metal 055 6 Boxes Welding Rod *welding Electrode 6013 056 24 Pcs Pre-painted Rib Type Roofing With Insulation *l-6.0m, T-0.5mm Cold-rolled Galvanized Iron Sheets 057 20 Pcs Pre-painted Plain Sheet 1.2m X 2.4m Cold-rolled Galvanized Iron Sheets 058 10 Pcs Side Flushing *pre-painted Gi Sheet 059 6 Pcs Ridgeroll *6m Pre-painted Gi Sheet 060 10 Pcs Stainless Gutter 16 X 8 Ft *box Type Stainless Mirror Or Brush Finish 061 3 Pcs Stainless Inside Gutter 24 X 8 Ft *box Type Stainless Mirror Or Brush Finish 062 4 Pcs Ficemboard 6.0mm *fiber Cement Board 6.0mm Thick 063 1000 Pcs Tex Screw *galvanized, Carbon Steel 064 6 Boxes Drill Bit 1/8” *high Speed Steel (hss) 065 2 Boxes Blind Rivets *aluminum 066 12 Pcs Pvc Pipe 4” (drainage) *polyvinyl Chloride Pipe As Per Astm 2729 Or Iso R-161 067 11 Pcs Pvc Pipe 3” (drainage) *polyvinyl Chloride Pipe As Per Astm 2729 Or Iso R-161 068 14 Pcs Pvc Pipe Tee Reducer 4”x3” *polyvinyl Chloride Pipe As Per Astm 2729 Or Iso R-161 069 1 Pc Pvc Pipe Tee 4” X 4” *polyvinyl Chloride Pipe As Per Astm 2729 Or Iso R-161 070 3 Pcs Pvc Pipe Coupler 4” *polyvinyl Chloride Pipe As Per Astm 2729 Or Iso R-161 071 28 Pcs Pvc Pipe Elbow 3” *polyvinyl Chloride Pipe As Per Astm 2729 Or Iso R-161 072 2 Pcs Pvc Pipe Elbow 4” *polyvinyl Chloride Pipe As Per Astm 2729 Or Iso R-161 073 2 Pcs Pvc Pipe End Cap 4” *polyvinyl Chloride Pipe As Per Astm 2729 Or Iso R-161 074 1 Gals Qde *can Be Thinned With A Solvent *gloss Finish 075 3 Gals Epoxy Primer Paint (gray) *dry Film Thickness 25um Per Coat *excellent Water Resistance 076 3 Gals Roof Paint (green) *acrylic Latex Paint *gloss Finish 077 30 Pcs Sand Paper (#150) *waterproof Abrasive Paper 078 6 Pcs Baby Roller (cotton) *cotton Fiber 079 4 Pcs Paint Brush (#2) *wooden Handle *white Or Black Bristles 080 4 Pcs Paint Brush (#1) *wooden Handle *white Or Black Bristles 081 1 Gal Lacquer Thinner *can Dissolve Most Resins And Stains 082 1 Tins Flat Latex *100% Acrylic Latex *for Interior And Exterior Use 083 2 Tins Semi-gloss Latex *100% Acrylic Latex *for Interior And Exterior Use 084 1 Ltr Acri Color *concentrated Acrylic-solvent Based Tinting Colorant 085 4 Bags Skimcoat *super Fine White *indoor And Outdoor Use *low Voc Levels *crack Resistant *excellent Surface Adhesion 086 10 Pcs Sand Paper (#150) *waterproof Abrasive Paper 087 2 Pcs Masking Tape *pressure-sensitive Tape *made Of A Thin And Easy-to-tear Paper *easily Released Pressure-sensitive Adhesive 088 2 Pcs Roller (#7) *7 Inches *cotton Fiber *plastic Pan 089 2 Pcs Baby Roller (cotton) *cotton Fiber 090 2 Pcs Paint Brush (#2) *wooden Handle *white Or Black Bristles 091 2 Pcs Paint Brush (#1) *wooden Handle *white Or Black Bristles 092 2 Gals Waterproofing Paint *excellent Adhesion On Concrete Substrates *cementitious Finish Total Amount Quotation Submitted By: Name Of Company/establishment : Address : Philgeps Registration No. (required) : Printed Name & Signature Of Authorized Representative : Designation/position : Contact No./s Date :

Details: This Announcement Is Not A Request For Proposal; No Solicitation Package Will Be Issued Until After An Evaluation Has Been Made On The Provided Sf-330s. There Will Be No Site Visits Arranged During This Phase Of The Requirement. this Is A Special Notice/request For Sf-330s For The Establishment Of An Architect-engineering (a/e) Contract With Services To Be Performed In The Hampton Roads Area In Hampton, Va. This Requirement Is Being Executed Under A 100% Set-aside To Service-disabled Veteran Owned Small Business (sdvosb) Firms Under Vaar 852.219-73. Interested Firms Must Be Registered In The Small Business Administration S (sba) Veteran Small Business Certification (vetcert) Database To Be Considered. the Sba Vetcert Is Located Here: Https://veterans.certify.sba.gov/#home blank Sf-330s Can Be Downloaded Through The Gsa Forms Library At: Https://www.gsa.gov/forms interested Firms Should Submit Their Current Sf-330, Parts I And Ii, To Contract Specialist, Donteana Gibbs Via Email At, Donteana.gibbs@va.gov And Contracting Officer, Guy K. Brooks Via Email At, Guy.brooks@va.gov. The Sf-330s Are Due No Later Than 3:00pm Edt, Thursday, January 9, 2025. scope Of Work this Project Requires The Services Of An Architectural-engineering (a/e) Firm With Experience In Historical Preservation. The A/e Must Possess Expertise In Both Architectural And Electrical Engineering, Particularly In Designing Campus Historical Preservation. All Designs Must Comply With Va Guidelines And Specifications. The Scope Of This Project Includes Requires The A/e To Renovate 51,808sf Of Space In Building 27 As Well As The Building Exterior In Accordance With Historical Preservation Guidelines. Work Includes Architectural, Mechanical, Structural, Plumbing, Electrical, Along With Historical Preservation Requirements. The Design Shall Include The Phasing Of Work To Minimize Impact On The Medical Center. intent the A/e Shall Provide Design And Construction Period Services For Non-recurring Maintenance (nrm) Construction Project 590-25-200 Campus Historical Preservation Building 27. The Intent Of The Historical Preservation Work Is To Ensure The Careful Restoration And Maintenance Of A Building S Architectural Integrity While Integrating Essential Engineering Systems Such As Mechanical, Electrical, Structural, Telecommunication, Fire Protection, And Plumbing. requirements the Requirements Of This A/e Project Will Include, But Are Not Limited To Site Investigation, Creating Documents, Drawings, And Specifications, And Final Inspection Of Construction. Please Carefully Read Attachment A Scope Of Work (sow) For The Full Details Of This Project. evaluation Of Offerors a/e Firms Will Be Selected Based Upon The Criteria Detailed In Attachment B Selection Criteria. Please Read The Selection Criteria Carefully And Provide Documented Experience And Skills That Addresses All Factors And Subfactors. selection Process the Agency Has Convened An Evaluation Board For The Evaluation Of Responses To This Notice. Responses Will Be Evaluated In Accordance With The Selection Of Architects And Engineers Statute (public Law 92-582), Formerly Known As The Brooks Act, And Implemented In Federal Acquisition Regulation (far) 36.6. Specifically, Sf 330 Submissions Will Be Evaluated To Identify The Most Highly Qualified Firms, Using The Selection Criteria In Attachment B. Discussions Will Be Held With The Three (3) Highest Rated Firms. Interviews May Be Conducted. The Processes At Far 36.602-4 And Far 36.606 Will Then Be Followed. selection Interview interviews Shall Be Scheduled With Firms Slated As The Most Highly Qualified. Firms Slated For Interviews Will Be Asked A Series Of Established Questions. Elaborate Presentations Are Not Desired. general Information all Design And Work Will Conform To The Current Edition Of The Va Master Specifications And Va Design Standards (published At Www.cfm.va.gov/til) As Well As All Asme, Osha, Ibc 2009, Nfpa And Nec Building Codes And Standards. All Work Shall Be Coordinated Through The Contracting Officer S Representative (cor). The A/e Firm Will Prepare Drawings And Specifications In Enough Detail Such That Qualified Outside General Contracting Companies Can Prepare Accurate And Timely Proposals For The Desired Construction Work. Microsoft Project Scheduling And Management Software Will Be Used By Both The A/e And Contractors To Allow For Regular Tracking Of Schedules And Work By The Va Medical Center. Schedules With Ms Project Will Be Regularly Sent To The Cor Upon Project Initiation And Whenever Significant Changes Occur In The Schedule. in Accordance With Vaar 836.204(h)(1), The Estimated Magnitude Of Construction Is Between $10,000,000 And $20,000,000. The A/e Will Provide An Initial Estimate Of Cost To Perform The Above Work And Will Design Only Those Items That Can Be Provided Within The Cost Limitation. The Estimated Cost Of Construction (ecc) Shall Only Be Provided To The Contractor In Which A Formal Proposal Is Sought For The Purposes Of Providing A Proposal. The A/e Will Provide Documents At Each Submission As Indicated In The Statement Of Work. the Naics Code For This Procurement Is 541330 - Engineering Services. The Current Small Business Size Standard For 541330 Is $25.5 Million. design Costs all Offerors Are Advised That In Accordance With Vaar 836.606-71 The Total Cost Of The Architect Or Engineer Services Contracted For The Production And Delivery Of Designs, Plans, And Specifications Shall Not Exceed Six Percent (6%) Of The Estimated Cost Of The Construction Project Plus Any Fees For Related Services And Activities. Additionally, Far 52.236-22 Design Within Funding Limitations, Will Be Applicable To This Procurement Action. Design Limitation Costs Will Be Provided To The Most Highly Rated A/e Firm(s) Selected In Accordance With The Outlined Process. limitations On Subcontracting iaw Vaar 852.219-73, Va Notice Of Total Service-disabled Veteran-owned Small Business Set-aside And 13 Cfr 125.6, A Service-disabled Veteran-owned Small Business Concern (sdvosb) Agrees That, In The Performance Of The Contract, It Will Not Pay More Than 50% Of The Amount Paid By The Government To Firms That Are Not Similarly Situated. Firms That Are Similarly Situated Are Those That Are Also Sba-registered Sdvosbs. requirements For Electronic Submission all Responses To This Special Notice Must Be Submitted Electronically As Described Below. Failure To Comply With This Requirement May Jeopardize The Possibility Of Receiving An Award For The Contract Due To Non-compliance With The Terms Of The Solicitation. You Must Submit Your Electronic Offer, And Any Supplemental Information (such As Spreadsheets, Backup Data, Technical Information), Using Any Of The Electronic Formats And Media Described Below. in Addition, Contractors Are Notified Of The Award Via An Electronic Notice Of Award E-mail. The Award Document Will Be Attached To The Notice Of Award E-mail. acceptable Electronic Formats (software) For Submission Of Offers files Readable Using The Current Microsoft Office Version Products: Word, Excel, Powerpoint, Or Access. Spreadsheet Documents Must Be Sent In A Format That Includes All Formulas, Macro, And Format Information. Print Or Scan Images Of Spreadsheets Are Not Acceptable. Please See Security Note Below For Caution Regarding Use Of Macros. When Submitting Construction Drawings Contractors Are Required To Submit One Set In Autocad And One Set In Adobe Pdf. (purpose: Contracting Can Open The Pdf Version And Engineering Can Open Autocad Files) files In Adobe Pdf (portable Document Format) Files: When Scanning Documents Scanner Resolution Should Be Set To 200 Dots Per Inch, Or Greater. another Electronic Format. If You Wish To Submit An Offer Using Another Format Than Those Described In These Instructions, E-mail The Contracting Officer/specialist Who Issued The Solicitation. Please Submit Your Request At Least Five (5) Calendar Days Before The Scheduled Closing Date Of The Solicitation. Request A Decision As To The Format Acceptability And Make Sure You Receive Approval Of The Alternate Format Before Using It To Send Your Offer. please Note That We Can No Longer Accept .zip Files Due To Increasing Security Concerns. e-mail Submission Procedures for Simplicity In This Guidance, All Submissions In Response To A Solicitation Will Be Referred To As Offers. subject Line: Include The Solicitation Number, Name Of Company, And Closing Date Of Solicitation. size: Maximum Size Of The E-mail Message Shall Not Exceed Ten (10) Megabytes. The Sf330, In Its Entirety, Shall Not Exceed One Email Of 5mb. The Sf330 (not Including Past Performance Questionnaires) Are Limited To 45 Pages. If The Page Limits Are Exceeded, The Pages In Excess Of The Limit Will Not Be Read Nor Considered. Only One Email Is Permitted Unless Otherwise Stated In This Paragraph Or In Writing By The Contract Officer Submitting The Solicitation. Due To Va It Security Protocols, Email Submissions Are Limited To 10mb Per Email. Furthermore, It Is The Sole Responsibility Of The Prospective Firms To Confirm Receipt Of Their Submission In Its Entirety Prior To The Closing Date & Time Of Their Submission In Response To This Synopsis. the Microsoft Outlook © Email Time/date Stamp Will Be Used To Date And Time Stamp Offers For The Official Record Of Receipt For The Submission. The Date And Time Stamp In Recipient S Inbox Is The Official Record Of Receipt. security Issues, Late Bids, & Unreadable Offers late Submission Of Offers Is Outlined At Far Parts 52.212-1(f), 52.214-7, And 52.215-1(c)(3). Attention Is Warranted To The Portion Of The Provision That Relates To The Timing Of Submission. please See Far 15.207(c) For A Description Of The Steps The Government Shall Take With Regard To Unreadable Offers. to Avoid Rejection Of An Offer, Vendors Must Make Every Effort To Ensure Their Electronic Submission Is Virus-free. Submissions Or Portions Thereof Submitted And Which The Automatic System Detects The Presence Of A Virus, Or Which Are Otherwise Unreadable, Will Be Treated As Unreadable Pursuant To Far Part 15.207(c). the Virus Scanning Software Used By Our E-mail Systems Cannot Always Distinguish A Macro From A Virus. Therefore, Sending A Macro Embedded In An E-mail Message Or An E-mail Attachment May Cause The E-mail Offer To Be Quarantined. You May Send Both The Spreadsheet And The Spreadsheet Saved In Pdf Format To Ensure That Your Proposal Is Readable. password Protecting Your Submission Is Not Permitted. The Contracting Officer Will File The Offer Electronically Which Will Allow Access Only By Designated Individuals. important Notice apparent Successful Offerors Must Apply For And Receive Verification From The Small Business Administration (sba) In Accordance With 38 Cfr Part 74 And Vaar 819.70 By Submission Of Documentation Of Veteran Status, Ownership, And Control Enough To Establish Appropriate Status, Offerors Must Be Both Visible And Verified By The Small Business Administration (sba) At The Time Of Submission Of Offers And At The Time Of Award. Failure To Be Both Verified By Sba And Visible On Vetcert At The Time Of Submission Of Offers And At The Time Of Award Will Result In The Offeror S Proposal Being Deemed Non-compliant. All Offerors Are Urged To Contact The Sba And Submit The Required Documents To Obtain Sba Verification Of Their Sdvosb Status If They Have Not Already Done So. attachments

Details: Description Republic Of The Philippines Barangay Tetuan Bids And Awards Committee Tetuan 24-0021 M. Nativitad, St., Zamboanga City Invitation To Bid For Supply And Delivery Of 1 Lot Various Disaster Equipment (name Of Project) 1. The City Government Of Zamboanga, Through The Annual Budget 2024 Under Other Maintenance And Operarting Expenses (omoe) Intends To Apply The Sum Of Two Hundred Sixteen Thousand Three Hundred Fifty Pesos (p 216,350.00) Only Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Supply And Delivery Of The Purchase Of One (1) Lot Various Disaster Equipment Pr No. 24-06-069 Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The City Government Of Zamboanga Now Invites Bids For The Supply And Delivery Of The 1 Lot Various Disaster Equipment The Sol. Goods Is Required By Ten (10) Calendar Days Bidders Should Have Completed Within A Period Of Ten (10) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project, With A Value Of At Least (50%) Of The Abc And To Meet Other Eligibility Requirements Stated In The Eligibility Documents. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Prospective Bidders May Obtain Further Information From Barangay Hall Of Tetuan In The Office Of The Bids And Awards Committee And Inspect The Bidding Documents At The Address Given Below During 8:00 Am To 5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 03-08, 2025 From The Given Address And Website/s Below And Upon Payment Of A Non-refundable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of P500.00the Method Of Payment Will Be Cash Payable To The Barangay City Treasurer’s Office. The Bidding Documents Shall Be Received Personally By The Prospective Bidder Or His/her Authorized Representative. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees “machine Copy Of The Official Receipt” Not Later Than The Submission Of Their Bids. 6. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission On Or Before January 09, 2025 At 10:00 Am At Office Of The Bids And Award Committee, Conference Room, M. Natividad St., Zamboanga City.late Bids Shall Not Be Accepted. 7. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. All Bids Must Be Accompanied By A Bid Security Which Shall Be A Bid Securing Declarationor At Least One Other Form Of The Following: Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Confirmed By A Universal/commercial Bank, Irrevocable Letter Of Credit Issued By A Universal/commercial Bank Or From Other Bank Certified By The Bangko Sentral Ng Pilipinas As Authorized To Issue Such Financial Instrument, Provided However That It Shall Be Confirmed Or Authenticated By A Universal/commercial Bank If Issued By A Foreign Bank In The Amount Of P1,230.00or Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security In The Amount Of P3,075.00or Any Combination Of The Foregoing In The Amount Proportionate To Share Of Form With Respect To Total Amount Of Security. The Bid Security Shall Be Denominated In Philippine Pesos And Posted In Favor Of The Procuring Entity. Bidders Are Required To Indicate The Brand Name And/or Name Of Manufacturer Of Goods Offered/quoted, When Appropriate. 8. Bid Opening Shall Be On January 13, 2025 At 10:00 Am At Office Of The Bids And Awards Committee, Conference Room, M. Natividad St., Zamboanga City. Bids Will Be Opened In The Presence Of The Bidder’s Representatives Who Choose To Attend The Activity. 9. To Be Delivered In The Barangay Hall Of Tetuan. 10. The Brangay Council Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 35.6 And 41 Of The 2016 Revised Implementing Rules Or Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. Bidders Are Advised To Use The Bid Form At The Back Of This Itb. Failure To Do So Would Lead To Non-acceptance Of The Bid. 12. For Further Information Please Refer To: Hazel Jane L. Fox Bac Secretariat Barangay Government Of Tetuan M.natividad Street, Zamboanga City Brgytetuan@gmail.com Tel. No. (063) 993-0269 Republic Of The Philippines Barangay Tetuan Bids And Awards Committee Tetuan 24-0021 M. Natividad Street, Zamboanga City Bid Form Date: ____________________ To: Barangay Council Of Tetuan Address: M. Natividad Zamboanga City Having Examined The Philippine Bidding Documents (pbds) Including The Supplemental Or Bid Bulletin Numbers Including Bid Bulletin Numbers Tetuan 24-0021 The Receipt Of Which Is Hereby Duly Acknowledge, We, The Undersigned, Offer To Supply/deliver/perform The Delivery And Supply Of The 1 Lot Various Disaster Equipment Inconformity With The Said Philippine Bidding Documents (pbds) For The Sum Of (total Bid Amount In Words And Figures) Or The Total Calculated Bid Price, As Evaluated And Corrected For Computational Errors, And Other Bid Modifications In Accordance With The Price Schedules Attached Herewith And Made Part Of This Bid. The Total Bid Price Includes The Cost Of All Taxes, Such As, But Not Limited To: [specify The Applicable Taxes, E.g. (i) Value Added Tax (vat), (ii) Income Tax’ (iii) Local Taxes, And (iv) Other Fiscal Levies And Duties], Which Are Itemized Herein Or In The Price Schedules, If Our Bid Is Accepted, We Undertake: A. To Deliver The Goods In Accordance With The Delivery Schedule Specified In The Schedule Of Requirements Of The Philippine Bidding Documents (pbds); B. To Provide A Performance Security In The Form, Amounts, And Within The Times Prescribed In The Pbds; C. To Abide By The Bid Validity Period Specified In The Pbds And It Shall Remain Binding Upon As At Any Time Before The Expiration Of That Period. [insert This Paragraph If Foreign-assisted Project With The Development Partner: Commissions Or Gratuities, If Any, Paid, Paid Or To Be Paid By Us To Agents Relating To This Bid, And To Contract Execution If We Are Awarded The Contract, Are Listed Below: Name And Address Amount And Purpose Of Agent Currency Commission Or Gratuity (if None, State “none”)] Until A Formal Contract Is Prepared And Executed, This Bid, Together With Your Written Acceptance Thereof And Your Notice Of Award, Shall Be Binding Upon Us. We Understand That You Are Not Bound To Accept The Lowest Calculated Bid Or Any Bid You May Receive. We Certify/confirm That We Comply With The Eligibility Requirements Pursuant To The Pbds. The Undersigned Is Authorized To Submit The Bid On Behalf Of ________________________________________________________ (name Of Bidder) As Evidenced By The Attached ______________________________________________________________________. (state The Written Authority) We Acknowledge That Failure To Sign Each And Every Page Of This Bid Form, Including The Attached Schedule Of Prices, Shall Be A Ground For The Rejection Of Our Bid. Name: _________________________________________________________________________ Legal Capacity: __________________________________________________________________ Signature: ______________________________________________________________________ Duly Authorized To Sign The Bid For And Behalf Of: _________________________________________ Date:__________________________ Price Schedule For Goods Name Of Bidder _____________________________________________________ Tetuan 24-0021 Page 1 Of 1 2 3 4 5 6 7 8 9 10 Item 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. Life Boat Ring Rescue Can With Harness Rescuer’s Throw Bag Rescuer Shovel Rescue Rope 12mmx 50mm Rescue Rope 12 Mm X 100mm Rescue Rain Coat Rescue Booths Big First Aid Kit Rechargeable Flashlights Chainsaw 7m’ Breathable Reflectorized Vest Safety Helmet Safety Glasses Megaphone Fire Extinguisher Small First Aid Kit 4x4 Tent Ambulance Collapsible Stretcher Adult Wheelchair Solar Flood Light 300w Country Of Origin Quantity 2 2 1 2 2 2 10 10 4 10 1 10 4 4 2 4 11 4 1 4 12 Unit Price Exw Per Item Transportation And All Other Costs Incidental To Delivery, Per Item Sales And Other Taxes Payable If Contract Is Awarded, Per Item Cost Of Incidental Services, If Applicable, Per Item Total Price, Per Unit (col 5+6+7+8) Total Price Delivered Final Destination (col.9) X (col 4) Purpose: For Barangay Tetuan Disaster Preparedness Name: _________________________________________________________________________ Legal Capacity: __________________________________________________________________ Signature: ______________________________________________________________________ Duly Authorized To Sign The Bid For And Behalf Of: ________________________________________ Date: ________________________________ Schedule Of Requirements The Delivery Schedule Expressed As Days/weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. Item Number Description Quantity Total Delivered, Days/weeks/months ________________________ Signature Over Printed Name Technical Specifications Brand Name Statement Of Compliance Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution Subject To The Applicable Laws And Issuances.] __________________________ Signature Over Printed Name Schedule Of Warranty This Serves As Warranty For _______________________________________________ In The Barangay Government Of Tetuan. Item No. Description Quantity Warranty _____________________________ Bidder Signature Over Printed Name Bid Data Sheet Itb Clause 5.3 For This Purpose, Contracts Similar To The Project Shall Be: A. Supply / Delivery Of The 1 Lot Various Disaster Equipment B. Completed Within Ten (10) Years Prior To The Deadline For The Submission And Receipt Of Bids. 7.1 “subcontracting Is Not Allowed.” 12 The Price Of The Goods Shall Be Quoted Delivered Duty Paid (ddp) At Cgso, Tetuan, Zamboanga City For This Project . 14.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration, Or Any Of The Following Forms And Amounts: A. The Amount Of Not Less Than P1,230.00; If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; Or B. The Amount Of Not Less Than P3, 075.00; If Bid Security Is In Surety Bond. 19.3 The Project Shall Be Awarded One Project Having Several Items That Shall Be Awarded As One Contract. 20.2 [list Here Any Licenses And Permits Relevant To The Project And The Corresponding Law Requiring It.] 21.2 [list Here Any Additional Contract Documents Relevant To The Project That May Be Required By Existing Laws And/or The Procuring Entity.] Special Conditions Of Contract Gcc Clause 1 [list Here Any Additional Requirements For The Completion Of This Contract. The Following Requirements And The Corresponding Provisions May Be Deleted, Amended, Or Retained Depending On Its Applicability To This Contract:] Delivery And Documents – For Purposes Of The Contract, “exw,” “fob,” “fca,” “cif,” “cip,” “ddp” And Other Trade Terms Used To Describe The Obligations Of The Parties Shall Have The Meanings Assigned To Them By The Current Edition Of Incoterms Published By The International Chamber Of Commerce, Paris. The Delivery Terms Of This Contract Shall Be As Follows: [for Goods Supplied From Abroad, State:] “the Delivery Terms Applicable To The Contract Are Ddp Delivered [indicate Place Of Destination]. In Accordance With Incoterms.” [for Goods Supplied From Within The Philippines, State:] “the Delivery Terms Applicable To This Contract Are Delivered Barangay Hall Of Tetuan, Zamboanga City. Risk And Title Will Pass From The Supplier To The Procuring Entity Upon Receipt And Final Acceptance Of The Goods At Their Final Destination.” Delivery Of The Goods Shall Be Made By The Supplier In Accordance With The Terms Specified In Section Vi (schedule Of Requirements). For Purposes Of This Clause The Procuring Entity’s Representative At The Project Site Is [indicate Name(s)]. Incidental Services – The Supplier Is Required To Provide All Of The Following Services, Including Additional Services, If Any, Specified In Section Vi. Schedule Of Requirements: Select Appropriate Requirements And Delete The Rest. A. Performance Or Supervision Of On-site Assembly And/or Start-up Of The Supplied Goods; B. Furnishing Of Tools Required For Assembly And/or Maintenance Of The Supplied Goods; C. Furnishing Of A Detailed Operations And Maintenance Manual For Each Appropriate Unit Of The Supplied Goods; D. Performance Or Supervision Or Maintenance And/or Repair Of The Supplied Goods, For A Period Of Time Agreed By The Parties, Provided That This Service Shall Not Relieve The Supplier Of Any Warranty Obligations Under This Contract; And E.training Of The Procuring Entity’s Personnel, At The Supplier’s Plant And/or On-site, In Assembly, Start-up, Operation, Maintenance, And/or Repair Of The Supplied Goods. F. [specify Additional Incidental Service Requirements, As Needed.] The Contract Price For The Goods Shall Include The Prices Charged By The Supplier For Incidental Services And Shall Not Exceed The Prevailing Rates Charged To Other Parties By The Supplier For Similar Services. Spare Parts – The Supplier Is Required To Provide All Of The Following Materials, Notifications, And Information Pertaining To Spare Parts Manufactured Or Distributed By The Supplier: Select Appropriate Requirements And Delete The Rest. A. Such Spare Parts As The Procuring Entity May Elect To Purchase From The Supplier, Provided That This Election Shall Not Relieve The Supplier Of Any Warranty Obligations Under This Contract; And B.in The Event Of Termination Of Production Of The Spare Parts: I.advance Notification To The Procuring Entity Of The Pending Termination, In Sufficient Time To Permit The Procuring Entity To Procure Needed Requirements; And Ii.following Such Termination, Furnishing At No Cost To The Procuring Entity, The Blueprints, Drawings, And Specifications Of The Spare Parts, If Requested. The Spare Parts And Other Components Required Are Listed In Section Vi (schedule Of Requirements) And The Cost Thereof Is Included In The Contract Price. The Supplier Shall Carry Sufficient Inventories To Assure Ex-stock Supply Of Consumable Spare Parts Or Components For The Goods For A Period Of Three (3) Months. If Not Used Indicate A Time Period Of Three Times The Warranty Period]. Spare Parts Or Components Shall Be Supplied As Promptly As Possible, But In Any Case, Within [insert Appropriate Time Period] Months Of Placing The Order. Packaging – The Supplier Shall Provide Such Packaging Of The Goods As Is Required To Prevent Their Damage Or Deterioration During Transit To Their Final Destination, As Indicated In This Contract. The Packaging Shall Be Sufficient To Withstand, Without Limitation, Rough Handling During Transit And Exposure To Extreme Temperatures, Salt And Precipitation During Transit, And Open Storage. Packaging Case Size And Weights Shall Take Into Consideration, Where Appropriate, The Remoteness Of The Goods’ Final Destination And The Absence Of Heavy Handling Facilities At All Points In Transit. The Packaging, Marking, And Documentation Within And Outside The Packages Shall Comply Strictly With Such Special Requirements As Shall Be Expressly Provided For In The Contract, Including Additional Requirements, If Any, Specified Below, And In Any Subsequent Instructions Ordered By The Procuring Entity. The Outer Packaging Must Be Clearly Marked On At Least Four (4) Sides As Follows: Name Of The Procuring Entity Name Of The Supplier Contract Description Final Destination Gross Weight Any Special Lifting Instructions Any Special Handling Instructions Any Relevant Hazchem Classifications A Packaging List Identifying The Contents And Quantities Of The Package Is To Be Placed On An Accessible Point Of The Outer Packaging If Practical. If Not Practical The Packaging List Is To Be Placed Inside The Outer Packaging But Outside The Secondary Packaging. Transportation – Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip, Or Ddp, Transport Of The Goods To The Port Of Destination Or Such Other Named Place Of Destination In The Philippines, As Shall Be Specified In This Contract, Shall Be Arranged And Paid For By The Supplier, And The Cost Thereof Shall Be Included In The Contract Price. Where The Supplier Is Required Under This Contract To Transport The Goods To A Specified Place Of Destination Within The Philippines, Defined As The Project Site, Transport To Such Place Of Destination In The Philippines, Including Insurance And Storage, As Shall Be Specified In This Contract, Shall Be Arranged By The Supplier, And Related Costs Shall Be Included In The Contract Price. Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip Or Ddp, Goods Are To Be Transported On Carriers Of Philippine Registry. In The Event That No Carrier Of Philippine Registry Is Available, Goods May Be Shipped By A Carrier Which Is Not Of Philippine Registry Provided That The Supplier Obtains And Presents To The Procuring Entity Certification To This Effect From The Nearest Philippine Consulate To The Port Of Dispatch. In The Event That Carriers Of Philippine Registry Are Available But Their Schedule Delays The Supplier In Its Performance Of This Contract The Period From When The Goods Were First Ready For Shipment And The Actual Date Of Shipment The Period Of Delay Will Be Considered Force Majeure. The Procuring Entity Accepts No Liability For The Damage Of Goods During Transit Other Than Those Prescribed By Incoterms For Ddp Deliveries. In The Case Of Goods Supplied From Within The Philippines Or Supplied By Domestic Suppliers Risk And Title Will Not Be Deemed To Have Passed To The Procuring Entity Until Their Receipt And Final Acceptance At The Final Destination. Intellectual Property Rights – The Supplier Shall Indemnify The Procuring Entity Against All Third-party Claims Of Infringement Of Patent, Trademark, Or Industrial Design Rights Arising From Use Of The Goods Or Any Part Thereof. 2.2 [if Partial Payment Is Allowed, State] “the Terms Of Payment Shall Be As Follows: _____________.” 4 The Inspections And Tests That Will Be Conducted Are: Quality Inspection By Accounting, Coa, Cgso And End User. Republic Of The Philippines) City Of _____________________) S.s Bid Securing Declaration Invitation To Bid No.: [insert Reference Number] To: Barangay Government Of Tetuan, Bids And Awards Committee M. Natividad Street, Tetuan Zamboanga City I/we, The Undersigned, Declare That: 1. I/we Understand That, According To Your Conditions, Bids Must Be Supported By A Bid Security, Which May Be In The Form Of A Bid Securing Declaration. 2. I/we Accept That: (a) I/we Will Be Automatically Disqualified From Bidding For Any Procurement Contract With Any Procuring Entity For A Period Of Two (2) Years Upon Receipt Of Your Blacklisting Order; And, (b) I/we Will Pay The Applicable Fine Provided Under Section 6 Of The Guidelines On The Use Of Bid Securing Declaration, Within Fifteen (15) Days From Receipt Of The Written Demand By The Procuring Entity For The Commission Of Acts Resulting To The Enforcement Of The Bid Securing Declaration Under Sections 23.1(b), 34.2, 40.1 And 69.1, Except 69.1(f),of The Irr Of Ra No. 9184; Without Prejudice To Other Legal Action The Government May Undertake. 3. I/we Understand That This Bid Securing Declaration Shall Cease To Be Valid On The Following Circumstances: A. Upon Expiration Of The Bid Validity Period, Or Any Extension Thereof Pursuant To Your Request; B. I Am/we Are Declared Ineligible Or Post-disqualified Upon Receipt Of Your Notice To Such Effect, And (i) I/we Failed To Timely File A Request For Reconsideration Or (ii) I/we Filed A Waiver To Avail Of Said Right; And; C. I Am/we Are Declared The Bidder With The Lowest Calculated Responsive Bid, And I/we Have Furnished The Performance Security And Signed The Contract. In Witness Whereof, I/we Have Hereunto Set My/our Hand/s This ___ Day Of [month][year] At [place Of Execution]. [insert Name Of Bidder Or Its Authorized Representative [insert Signatory’s Legal Capacity] Affiant [jurat] [format Shall Be Based On The Latest Rules On Notarial Practice] Section Ii. Instructions To Bidders Notes On The Instructions To Bidders This Section On The Instruction To Bidders (itb) Provides The Information Necessary For Bidders To Prepare Responsive Bids, In Accordance With The Requirements Of The Procuring Entity. It Also Provides Information On Bid Submission, Eligibility Check, Opening And Evaluation Of Bids, Post-qualification, And On The Award Of Contract. 1. Scope Of Bid The Procuring Entity, Barangay Council Of Tetuan Wishes To Receive Bids For The Supply And Delivery Of The 1 Lot Various Disaster Equipment With Tetuan 24-0021 The Procurement Project (referred To Herein As “project”) Is Composed Of The Details Of Which Are Described In Section Vii (technical Specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding As Indicated Below For The Annual Budget 2024 Under The Other Maintenance And Operating Expenses (omoe) In The Amount Of Two Hundred Sixteen Thousand Three Hundred Fifty Pesos ( 216,350.00) 2.2. Nga, The General Appropriations Act Or Special Appropriations. 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manuals And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Ib By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Verified And Accepted The General Requirements Of This Project, Including Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, And Coercive Practices The Procuring Entity, As Well As The Bidders And Suppliers, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2.b Foreign Ownership Limited To Those Allowed Under The Rules May Participate In This Project. 5.3. Pursuant To Section 23.4.1.3 Of The 2016 Revised Irr Of Ra No.9184, The Bidder Shall Have An Slcc That Is At Least One (1) Contract Similar To The Project The Value Of Which, Adjusted To Current Prices Using The Psa’s Cpi, Must Be At Least Equivalent To: A. For The Procurement Of Non-expendable Supplies And Services: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc. B. For The Procurement Of Expendable Supplies: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Twenty-five Percent (25%) Of The Abc. 6. Origin Of Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un, Subject To Domestic Preference Requirements Under Itb Clause 18. 7. Subcontracts The Procuring Entity Has Prescribed That: Subcontracting Is Not Allowed. 8. Pre-bid Conference No Pre-bid Conference 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 10.2. The Bidder’s Slcc As Indicated In Itb Clause 5.3 Should Have Been Completed Within Ten (10) Years Prior To The Deadline For The Submission And Receipt Of Bids. 10.3. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. Similar To The Required Authentication Above, For Contracting Parties To The Apostille Convention, Only The Translated Documents Shall Be Authenticated Through An Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 11.2. If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification Issued By Dti Shall Be Provided By The Bidder In Accordance With Section 43.1.3 Of The 2016 Revised Irr Of Ra No. 9184. 11.3. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.4. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 9184. 12. Bid Prices 12.1. Prices Indicated On The Price Schedule Shall Be Entered Separately In The Following Manner: A. For Goods Offered From Within The Procuring Entity’s Country: I. The Price Of The Goods Quoted Exw (ex-works, Ex-factory, Ex-warehouse, Ex-showroom, Or Off-the-shelf, As Applicable); Ii. The Cost Of All Customs Duties And Sales And Other Taxes Already Paid Or Payable; Iii. The Cost Of Transportation, Insurance, And Other Costs Incidental To Delivery Of The Goods To Their Final Destination; And Iv. The Price Of Other (incidental) Services, If Any, Listed In E. B. For Goods Offered From Abroad: I. Unless Otherwise Stated In The Bds, The Price Of The Goods Shall Be Quoted Delivered Duty Paid (ddp) With The Place Of Destination In The Philippines As Specified In The Bds. In Quoting The Price, The Bidder Shall Be Free To Use Transportation Through Carriers Registered In Any Eligible Country. Similarly, The Bidder May Obtain Insurance Services From Any Eligible Source Country. Ii. The Price Of Other (incidental) Services, If Any, As Listed In Section Vii (technical Specifications). 13. Bid And Payment Currencies 13.1. For Goods That The Bidder Will Supply From Outside The Philippines, The Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Accepted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreign Currencies, Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 13.2. Payment Of The Contract Price Shall Be Made In Philippine Pesos. 14. Bid Security 14.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 14.2. The Bid And Bid Security Shall Be Valid Until One Hundred Twenty Days [120]. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 15. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. 16. Deadline For Submission Of Bids 16.1. The Bidders Shall Submit On January 09, 2025 At 10:00 Am At Barangay Hall, Conference Room, M. Natividad St., Zamboanga City As Indicated In Paragraph 6 Of The Ib. 17. Opening And Preliminary Examination Of Bids 17.1. The Bac Shall Open The Bids On January 13, 2024 At 10:00 Am At Barangay Hall, Conference Room, M. Natividad St., Zamboanga City As Specified In Paragraph 8 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 17.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 18. Domestic Preference 18.1. The Procuring Entity Will Grant A Margin Of Preference For The Purpose Of Comparison Of Bids In Accordance With Section 43.1.2 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed,” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of The 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids Bidders May Submit A Proposal On Any Of The Lots Or Items, And Evaluation Will Be Undertaken On A Per Lot Or Item Basis, As The Case Maybe. In This Case, The Bid Security As Required By Itb Clause 15 Shall Be Submitted For Each Lot Or Item Separately. 19.3. The Descriptions Of The Lots Or Items Shall Be Indicated In Section Vii (technical Specifications), Although The Abcs Of These Lots Or Items Are Indicated In The Bds For Purposes Of The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184. The Nfcc Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 19.4. The Project Shall Be Awarded One Project Having Several Items That Shall Be Awarded As One Contract. 19.5. Except For Bidders Submitting A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation, All Bids Must Include The Nfcc Computation Pursuant To Section 23.4.1.4 Of The 2016 Revised Irr Of Ra No. 9184, Which Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. For Bidders Submitting The Committed Line Of Credit, It Must Be At Least Equal To Ten Percent (10%) Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 20. Post-qualification 20.2. Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps) And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract 21.1. The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds.

Description: Item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| inspection Of Supplies--fixed-price (aug 1996)|2||| inspection And Acceptance - Short Version|8|x||x|||||| stop-work Order (aug 1989)|1|| general Information-fob-destination|1|b| wide Area Workflow Payment Instructions (jan 2023)|16|invoice And Receiving Reports (combo)|n/a|tbd|n00104|tbd|tbd|see Schedule|tbd|n/a|n/a|n/a|||||| federal Acquisition Supply Chain Security Act Orders-prohibition (dec 2023)|12||||||||||||| notice Of Total Small Business Set-aside (oct 2020)(deviation 2020-o0008)|1|| alternate A, Annual Representations And Certifications (oct 2024)|13|||||||||||||| small Business Program Representations (feb 2024)|4|||x|| annual Representations And Certifications (may 2024)|13|334515|750|||||||||||| notice Of Priority Rating For National Defense, Emergency Perpardeness, And Enrgy Progam Use (april 2008))|2||x| the Purpose Of This Amendment Is To Extend The Due Date To 06 Jan 2025. All Other Terms And Conditions Remain The Same. the Purpose Of This Amendment Is To Change The Procurement From A Restricted Environment To A Sbsa. The Solicitation Point Of Contact Is Hereby Changed To Carly Gassert, Carly.a.gassert.civ@us.navy.mil. Revised Irpod And Drawing Documents Are Available At The Bpmi Site. Vendor Review Of The Irpod Is Mandatory. The Due Date Is Hereby Extended To 06 Dec 2024. All Other Terms And Conditions Remain The Same. unless Otherwise Specified, Pricing For This Request For Quote Is Valid For 60 Days After The Closing Date As Indicated On The Proposal. Please Specify (if Other Than 60 Days) ______________ Days. if You Are Submitting Your Quote Via E-mail Or Neco Please Specify The Number Of Days Pricing Is Valid. all Contractual Documents (i.e. Contracts, Purchase Orders, Task Orders, Delivery Orders And Modifications) Related To The Instant Procurement Are Considered To Be 'issued' By The Government When Copies Are Either Deposited In The Mail, Transmitted By Facsimile, or Sent By Other Electronic Commerce Methods, Such Ase-mail. The Government's Acceptance Of The Contractor's Proposal Constitutes Bilateral Agreement To 'issue' Contractual Documents As Detailed Herein. technical Documents Associated With This Solicitation, Such As Drawings, Individual Repair Part Ordering Data (irpod), Strs And Other Procurement Related Documents May Be Obtained At: https://logistics.unnpp.gov this Website Requires A Password And Pre-registration. Please Contact The E-commerce Help Desk At 518-395-4357 To Register Or For Help Logging Into The Website. a Hard Copy Of The Individual Repair Part Ordering Data (irpod) And/or Drawingswill Not Be Mailed To You. to Request A Copy Of The Solicitation, Please Contact The Contracting Officer Listed And Provide Your Cage Code. in Order For Your Offer To Be Considered, You Must Submit Your Quote Prior To The Closing Date/time Listed On This Solicitation. section "s" Of Clause 52.212-4, Order Of Precedence, Is Not Applicable To This Procurement. \ all Drawings Required For Procurement Of 109022gp8, Probe & Cable Assembly Havebeen Identified And A New Irpod Has Been Created To Include These Drawings. Pd Has Been Revalidated And New Irpod And All Drawings Are Now Available In E-commerce. unless Otherwise Specified, Pricing For This Request For Quote Is Valid For 60 Days After The Closing Date As Indicated On The Proposal. Please Specify (if Other Than 60 Days) ______________ Days. if You Are Submitting Your Quote Via E-mail Or Neco Please Specify The Number Of Days Pricing Is Valid. all Contractual Documents (i.e. Contracts, Purchase Orders, Task Orders, Delivery Orders And Modifications) Related To The Instant Procurement Are Considered To Be 'issued' By The Government When Copies Are Either Deposited In The Mail, Transmitted By Facsimile, or Sent By Other Electronic Commerce Methods, Such Ase-mail. The Government's Acceptance Of The Contractor's Proposal Constitutes Bilateral Agreement To 'issue' Contractual Documents As Detailed Herein. technical Documents Associated With This Solicitation, Such As Drawings, Individual Repair Part Ordering Data (irpod), Strs And Other Procurement Related Documents May Be Obtained At: https://logistics.unnpp.gov this Website Requires A Password And Pre-registration. Please Contact The E-commerce Help Desk At 518-395-4357 To Register Or For Help Logging Into The Website. a Hard Copy Of The Individual Repair Part Ordering Data (irpod) And/or Drawingswill Not Be Mailed To You. to Request A Copy Of The Solicitation, Please Contact The Contracting Officer Listed And Provide Your Cage Code. in Order For Your Offer To Be Considered, You Must Submit Your Quote Prior To The Closing Date/time Listed On This Solicitation. section "s" Of Clause 52.212-4, Order Of Precedence, Is Not Applicable To This Procurement. \ 1. Scope 1.1 In The Event Of A Conflict Between Section "c" And Section "d" Of The Contract/purchase Order, Section "c" Will Take Precedence. 2. Applicable Documents 2.1 Applicable Documents; technical Documents Associated To This Solicitation Or Award Such As; Irpod, Drawings,technical Data, Strs, As Well As Certain Military Specifications, And Commercial Item Descriptions (cid) Etc. May Be Obtained At (https://logistics.unnpp.gov/ecommerce) These Documents, At The Required Revision Levels That Are Associated To Either This Solicitation Or Award, Become A Part Of This Solicitation Or Award Unless Changed By An Admendment To The Solicitation Or Modification To the Award. this Website Requires A Password And Pre-registration. To Obtain Instruction On How To Register And Obtain A Password Contact The Bpmi Website Administrator. 3. Requirements 3.1 Navsup Wss-mech Code N94 Additional Technical Documentation order Of Precedence And Effective Issues Of Cited Documentation Dated: July 2004 a. Order Of Precedence For Document Conflict Resolution: The Technical And Quality Requirements Applicable To Manufacture Of The Material Being Purchased Under This Order Are Contained Or Invoked In One Or More Of The Documents Listed Below. In The Event Of any Inconsistencies Between Any Provisions Of This Order, The Order Or Precedence Shall Be As Follows: 1. Amendments To The Purchase Order/contract 2. Schedule Of Supplies Of The Purchase Order/contract. 3. Terms And Conditions Of The Purchase Order/contract. 4. Individual Repair Part Ordering Data (irpod); Or Master Procurement Specification, As Applicable. 5. Any Invoked Standard Technical Requirements (strs). 6. Drawings Referenced In The Irpod, Or Master Procurement Specification , As Applicable. 7. Specifications Referenced In The Irpod, Master Procurement Specifications Or Drawing(s), As Applicable. b. Effective Issues Of Cited Drawings, Specifications, Standards And Other Documents: 1. The Contractor Shall Comply With The Specified Revisions Of The Documents (i.e. Drawings,specifications,standards And Other Documents) Cited In The Irpod And/or Procurement Specification Contained Herein. The Contractor Shall Obtain Written Approval for The Contracting Officer To Use Document Revisions Other Than Those Specified. When A Later Drawing Revision Is Submitted For Approval, Two Full Size Clear Legible Prints Shall Be Provided. 2. Where Documents Are Referred To Only By The Basic Identification Name Or Number And No Specific Revision Thereto, The Contractor Use Of Any Issue Of The Document Except All Such Revisions Shall Be Dated 1 November 1969 Or Later. c. Use Of Document Revisions In Their Entirety: 1. Contractors Shall Use Revisions To Each Cited Or Referenced Document In Its Entirety Unless The Contractor Obtains Contracting Officer Approval To Do Otherwise (i.e. The Contractor Shall Not Use Portions Of Different Revisions Of A Document). d. Vendor Waiver/deviations On Critical Contracts. 1. Compliance With The Delivery Date And Technical Requirements Of Navsup Wss Critical Repair Part Material Contracts Is Expected. 2. As The Cautionary Note Contained In The Contract States, Seller Intended Use Of Any Material Which Is Not In Full Compliance With The Specified Contract Technical Requirements, Should Be Identified As An Exception In Advance Either At The Time The Quotation is Submitted Or Prior To Manufacture. 3. Requests For Delivery Date Extensions And Waivers/deviations Should Be Accompanied By An Explanation Of The Cause For The Delay, Or The Reason For The Requested Non-conformance With An Offer Of Consideration In The Event The Contracting Officer Concurs With your Request. 4. Requests For Waivers/deviations Should Provide Justification For The Requested Change Including An Evaluation Which Demonstrates That Proposed Non-conformance Will Not Affect The Quality, Form, Fit, Or Function Of The Part. Where A Proposed Alternate Or replacement Item Is Offered, Supporting Technical Data (catalog Page, Drawing (s), Etc.) That Fully Describe The Proposed Item Shall Be Provided For Technical Evaluation. 5. Requests Which Do Not Contain The Above Information Will Be Returned And Will Not Be Submitted To Technical/engineering Review Until Sufficient Justification Is Provided. 6. Requests For Waivers/deviations Shall Be Presented To The Government Quality Assurance Representative (qar) For Comment. The Qar Shall Forward The Request, With Their Comments, Directly To The Post Award Pco Identified In The Contract/purchase Order Within five Working Days After Receipt. e. Exclusion Of Mercury 1. Mercury Or Mercury Containing Compounds Shall Not Be Intentionally Added To Or Come In Direct Contact With Hardware Or Supplies Under This Contract. 4. Quality Assurance 4.1 The Quality Assurance Requirements Are Located In The Individual Repair Part Ordering Data (irpod). the Contractor Shall Provide And Maintain An Inspection System Acceptable To The Government Covering The Supplies Herein. records Of All Inspection Work By The Contractor Shall Be Kept Complete And Available To The Government During The Performance Of This Contract And For Such Longer Periods As May Be Specified Elsewhere In The Contract. 5. Packaging 5.1 When The Cleanliness Control Requirements Of One Or More Of The Following Documents Are Invoked: Mil-std-767, Mil-std-2041, Refueling Clean, Or Reactor Plant Clean, The Following Clarification Of Requirements For Mil-prf-23199 Packaging Of Repair Parts applies. (1). The Following Summary Clarifies The Packaging Requirements Of Mil-prf-23199 Pertaining To The Use Of Mil-dtl-24466 Green Poly Bags. The Supplier Remains Responsible For Meeting All Contract Requirements. Suppliers Who Are Unsure Of The Packaging, Packing, and Marking. requirements For A Particular Part Should Request Clarification By Contacting The Navsup-wss Contracting Poc. (a). Paragraph 3.4.2 Of Mil-prf-23199 Discusses Level B Packaging And Refers To Paragraph 3.3.1 For The Method Of Packaging. Paragraph 3.3.1 Provides Several Methods Of Packaging. Packaging In Heat Sealed Envelopes Is Covered In Paragraph 3.3.1.1 Which States, "components Which Are Subject To Cleanliness Controls (see 6.2) Or As Specified (see 6.1) Shall Be Packaged In Heat Sealed Envelopes (see 3.2.2.5 And 3.2.2.5.1)". (2). The Following Conditions Must Be Satisfied In Order For Mil-dtl-24466 Bags To Apply: (a). Paragraph 6.2 Of Mil-prf-23199 Defines Cleanliness Controls As Any Reference To (or Application Of) The Cleanliness Control Requirements Of One Or More Of The Following Documents: Mil-std-767, Mil-std-2041, Refueling Clean, Reactor Plant Clean, Or Other requirements Identified Within The Irpod. the Repair Part Must Have Cleaning Requirements Of One Of The Aformentioned Methods. (b). Paragraph 6.1 Contains Ordering Data Options. Paragraph 6.1(k)2. Provides An Option To Specify The Method Of Packaging To Be Used When Packaging Is Other Than In Accordance With Paragraph 3.3.1.1 Only. If A Contract Specifies Any Additional Requirements for The Use Of Green Poly Bags, Then They Are Required And Take Precedence. (4). The Use Of Fire Retardant Packaging Material Is No Longer Required In Any Navsup-wss N94 Contract. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 1. Nuclear Reactor Publications Assigned Navsea Document And Identification Numbers That Are Not Available From Bpmi E-commerce Web Site Must Be Requested From: contracting Officer navsup Wss-mech code N943 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 requests For "official Use Only" And "noforn" (not Releasable To Foreign Natio Nals) Documents Must Identify The Quotation Number On Pre-award Procurement Actions. Requests Must Be Submitted To The Pco For Certification Of "need-to-know" For The Document. On post-award Actions, The Request Must Identify The Government Contract Number, And Be Submitted Via The Defense Contract Management Agency (dcma) For Certification Of "need-to-know" For The Document. 2. Commercial Specifications, Standards And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. They May Be Obtained From The Publishers Or Societies Of The Applicable Documents. 6.2 In Accordance With Dodi 5230.24 All Documents And Drawings Provided By The U.s. Navy To Prospective Contractors Must Include A "distribution Statement" To Inform The Contractor Of The Limits Of Distribution, And The Safeguarding Of The Information contained On Those Documents And Drawings. There Are 6 (six) Separate Distribution Statement Codes Used For Non-classified Documents And Drawings. The Definition For Each Is As Follows: a... Approved For Public Release; Distribution Is Unlimited. b... Distribution Authorized To Us Governments Agencies Only. c... Distribution Authorized To Us Government Agencies And Their Contractors. d... Distribution Authorized To Dod And Dod Contractors Only. e... Distribution Authorized To Dod Components Only. f... Further Distribution Only As Directed By Commander, Naval Sea Systems Command, Code 09t. 6.3 Information Regarding Abbreviations, Symbols And Codes Appearing On Dd Form 1423 - The Following Information Is Provided To Assist In Understanding The Intent Of The Requirement To Provide A Deliverable Item To The Government. The Explanation Of abbreviation, Symbols And Codes Found In A Block Follows The Block Number As They Appear On The Dd Form 1423. block A: Is The Actual Contract Line Item No. block B: Is The Actual Collective Physical List Of The Deliverable Item(s) Which Are Part Of The Total Requirement Of The Contract/purchase Order. block C: Is The Category Of Data Required, Tdp Is Defined In Mil-t-31000. Tm Is Defined In Part 1x, Section B Of Dodi 5000.2. Navsup-wss Has Reasoned That Most Dd Form 1423's Included In Our Solicitations Meet The Requirement Of Tdp As Navsup-wss Does Not Regularly Purchase Only Technical Manuals Without Purchasing Hardware And Related Tdp Software. Therefore, Most Navsup-wss Dd Form 1423 Category Code Will Be Tdp. block D: Is The Name Of The Parent System, Next Higher Assembly, Or The Item Being Purchased. block E: Is The Purchase Request Number, Request For Proposal Number, Invitation For Bid Number Or Another Number For Tracking And Monitoring Purposes. block F: Is The Successful Offerors Name And Or Cage Code. block G: Is The Name Of The Individual And Or The Code/activity Of The Individual Who Prepared The Dd Form 1423 And Included The Requirement In The Technical Data Package (tdp). block H: Self Explanatory. block I: Is The Name And Signature Of The Individual Who Approved The Content And The Need For Inclusion Of The Dd Form 1423 In The Tdp. block J: Self Explanatory. block 1: Is The Exhibit Line Item Number (elin). block 2: Is The Title Of The Data Item Cited In Block 4. block 3: Is The Subtitle Of The Data Item Cited In Block 4 And Is Used If The Title Requires Clarification. block 4: Is The Actual Data Item Description (did) Number Or The Actual Technical Manual Contract Requirements Number. In The Event The Dd Form 1423 Is Requiring A Technical Manual The Numbered Tmcr Will Be An Attachment To The Contract/purchase Order. block 5: Is The Section And Paragraph Area, Where The Requirement Statement For The Dd Form 1423 Will Be Found. block 6: Is The Activity That Will Inform The Contractor Of Approval, Conditional Approval Or Disapproval Of The Deliverable Item. block 7: Is A Code Which Designates Authority For Inspection And Acceptance Of The Deliverable Item. The Definition Of The Codes Is As Follows: Dd Form 250 Code Inspection Acceptance Ss (1) (2) Dd (3) (4) Sd (1) (4) Ds (3) (5) Lt (6) (7) No (8) (8) Xx (9) (9) (1) Inspection At Source. (2) Acceptance At Source. (3) No Inspection Performed At Source. Final Inspection Performance At Destination. (4) Acceptance At Destination. (5) Acceptance At Source. Acceptance Based On Written Approval From The Contract Officer. (6) Letter Of Transmittal Only. Lt Should Not Be Used When Inspection Is Required. The Data Is Sent By The Contractor Directly To The Personnel Listed In Block 14 Of The Dd Form 1423. Lt Is Used When The Contracting Agency Does Not Desire To Have A Dd Form 250 For Each And Every Piece Of Data Developed By The Contractor. The Only Other Authorized Use Of Lt Is The Special Case Where The Contracting Agency Does Not Desire To Have Separate Dd Forms 250 But Desires To Have A Government Quality Assurance Representative Perform Inspection. The Government Quality Assurance Representative Shall Be Listed On The Distribution In Block 14 And Requested To Provide Comments Via The Quality Assurance Letter Of Inspection. Use Of The Symbol Lt Is Not Authorized For Data Comprising Final Delivery Of Technical Data Package Of For Technical Manuals. (lt May, However, Be Used For Delivery Of Preliminary Tdp's Or Tm's). (7) As Specified In Block 8 Of The Dd Form 1423. (8) No Inspection Or Acceptance Required. No Dd Form 250 Or Letter Of Transmittal Required. Use Of The Symbol No Is Not Authorized For Data Comprising Technical Data Packages Or For Technical Manuals. (9) Inspection And Acceptance Requirements Specified Elsewhere In The Contract. block 8: Is The Approval Code - Items Of Critical Data Requiring Specific Advanced Written Approval Prior To Distribution Of The Final Data Item Will Be Identified By Placing An "a" In This Field. This Data Item Requires Submission Of A Preliminary Draft Prior To Publication Of A Final Document. When A Preliminary Draft Is Required, Block 16 Of The Dd Form 1423 Will Show Length Of Time Required For Government Approval/disapproval And Subsequent Turn-around Time For The Contractor To Resubmit The Data After Government Approval/disapproval Has Been Issued. Block 16 Will Also Indicate The Extent Of The Approval Requirements, E.g., Approval Of Technical Content And/or Format. block 9: Is The Distribution Statement Code Which Explains How The Government Can Circulate The Deliverable Item. The Definition Of Codes A, B, C, D, E, Or F Is As Follows: A. Distribution Of The Item Is Unrestricted. B. Distribution Of The Item Is Limited To Agencies Only. C. Distribution Of The Item Is Limited To Contractors With A Cage Code And Have A Dd Form 2345 On File With The Dla Logistics Information Services (dlis) Battle Creek, Mich. Or Government Activities. D. Distribution Of The Item Is Limited To Dod Activities And Dod Contractors Only. E. Distribution Of The Item Is Limited To Dod Components Only. F. Distribution Of The Item Is Restricted From Foreign Nations And Foreign Nationals. block 10: Is The Frequency Which The Deliverable Item Is Expected To Be Delivered To The Government. The Abbreviations And Their Meaning. Annly Annually Asgen As Generated Asreq As Required Bi-mo Every Two Months Bi-we Every Two Weeks Daily Daily Dfdel Deferred Delivery Mthly Monthly One/r One Time With Revisions Qrtly Quarterly Semia Every Six Months Wekly Weekly Xtime Number Of Times To Be Submitted (1time, 2times...9times) Use Of These Codes Requires Further Explanation In Block 16 To Provide The Contractor With Guidance Necessary To Accurately Price The Deliverable Data Item. Other Abbreviations Not Appearing On The Above List May On Occasion Be Used In Block 10 Of The Dd Form 1423. When Other Abbreviations Are Used They Will Be Fully Explained In Block 16 Of The Dd Form 1423. block 11: Is The Last Calendar Date, Expressed In Year/month/day Format, The Deliverable Item Is To Be Received By The Requiring Office Cited In Block 6 Of The Dd Form 1423 For An Item With A Block 10 Entry Indication A Single Delivery. If The Item Is To Be Submitted Multiple Times, The Number Stated Is The Number Of Calendar Days After The Frequency Cited In Block 10 The Item Is To Be Received By The Requiring Office Cited In Block 6 Of The Dd Form 1423. On Occasion The Deliverable Item Will Be Required To Be Submitted Prior To The End Of The Frequency Cited In Block 6. In That Event The Requirement Will Be Fully Explained In Block 16 Of The Dd Form 1423. block 12: Is The Date Of First Submission Of The Deliverable Item To The Requiring Office (block 4) Expressed In Year/month/day Format. The Abbreviations And Their Meaning Are As Follows: Asgen As Generated Asreq As Required Dac Days After Contract Date Dfdel Deferred Delivery Eoc End Of Contract Eom End Of Month Eoq End Of Quarter Specific Instructions For These Requirements Will Be Provided In Block 16. If The Deliverable Item Is Constrained By A Specific Event Or Milestone The Constraint Will Be Fully Explained In Block 16 Of The Dd Form 1423. "as Generated", "as Required", And "deferred Delivery" Will Always Be Fully Explained In Block 16. block 13: Is The Date Of Subsequent Submission Of The Deliverable Item, After The Initial Submission. Subsequent Submission Is Only Used To Indicate The Specific Time Period. The Data Is Required When Block 10 Of The Dd Form 1423 Indicates Multiple Delivery Is Required. This Does Not Apply To Resubmission Of A Deliverable Item That Has Been Reviewed By The Requiring Office And Determined To Be Only Conditionally Acceptable Or Unacceptable. block 14a: Will Contain The Activity Name(s) Where The Deliverable Item Is To Be Sent. If The Activity Is Other Than Dcma Or Navsup-wss The Full Name, Address (including Code) Will Be Specified. That Specific Information Will Be Located In Block 16 Of The Dd Form 1423. block 14b: Is The Number Of Copies Of Draft And Or Final Copies To Be Submitted. When Final "repro" Copies Are To Be Submitted Block 16 Will Clarify The Type Of Repro Copies Required. (e.g., Vellum, Negative, Etc.) block 15: Is The Total Of Each Type Of Copies To Be Submitted As Required By Block 14. block 16: Is The Block Used To Provide Additional Or Clarifying Information Blocks 1 Through 15. This Block Is Also The Only Area Used To Tailor The Document Listed In Block 4. Only Deletions To The Minimum Requirements Stated In The Document In Block 4 Are Allowed. Block 16 May Also Be Used To Specify The Medium For Delivery Of The Data. block 17: Is The Block Where The Bidder Or Offeror Is To Enter The Appropriate Price Group. The Price Groups Are Defined As Follows: A. Group I - Data Which The Contractor Prepares To Satisfy The Government's Requirements. The Contractor Does Not Need This Type Of Data To Perform The Rest Of The Contract. Price Would Be Based On Identifiable Direct Costs, Overhead, General And Administrative (g&a) And Profit. B. Group Ii - Data Essential To Contract Performance Which Must Be Reworked Or Amended To Conform To Government Requirements. The Price For Data In This Group Would Be Based On The Direct Cost To Convert The Original Data To Meet Government Needs And To Deliver It, Plus Allocable Overhead, G&a And Profit. C. Group Iii - Data Which The Contractor Must Develop For His Own Use And Which Requires No Substantial Change To Conform To Government Requirements Regarding Depth Of Content, Format, Frequency Of Submittal, Preparation, And Quality Of Data. Only The Costs Of Reproducing, Handling And Delivery, Plus Overhead, G&a And Profit, Are Considered In Pricing Data In This Group. D. Group Iv - Data Which The Contractor Has Developed As Part Of His Commercial Business. Not Much Of This Data Is Required And The Cost Is Insignificant. The Item Should Normally Be Coded "no Charge." An Example Is A Brochure Or Brief Manual Developed For Commercial Application Which Will Be Acquired In Small Quantities, And The Added Cost Is Too Small To Justify The Expense Of Computing The Charge That Otherwise Would Go With The Acquisition. block 18: Enter The Total Estimated Price Equal To That Portion Of The Total Price Which Is Estimated To Be Attributable To The Production Or Development For The Government Of That Item Of Data. The Entry "n/c" For "no Charge" Is Acceptable. the Packaging Label Shall Be Marked With The Nomenclature As Cited On Irpod. date Of First Submission=eoc submit At The Time Of Material Delivery A Certificate Of Compliance Per Di-misc-81356 To Navsup-wss Code N9433. A Separate Certificate Of Compliance Shall Be Prepared And Submitted For Each Unique Combination Of Contract/purchase Order Number, National Stock number And Item Nomenclature Specified In The Schedule Of Supply/services. di-misc-a81356 Cited In Block 4 Is A Unique Navsup-wss Dd1423 Sequence Control number - Certification Package To Be Iaw Did Di-misc-81356(latest Rev).

Description: Item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| higher-level Contract Quality Requirement (navicp Review Feb 1991)(feb 1999)|1|mil-i-45208| inspection Of Supplies--fixed-price (aug 1996)|2||| inspection And Acceptance - Short Version|8|x||x|||||| stop-work Order (aug 1989)|1|| general Information-fob-destination|1|b| wide Area Workflow Payment Instructions (jan 2023)|16|invoice And Receiving Report (combo)|n/a|tbd|n00104|tbd|tbd|see Schedule|tbd|n/a|n/a|n/a|||||| inspection System Program Plans, Or Premanufacturing Or Test Procedures|1|45| first Article Approval--contractor Testing (sep 1989)|10|1|0001|45|30|n/a|n/a|0001|45|x|| federal Acquisition Supply Chain Security Act Orders-prohibition (dec 2023)|12||||||||||||| notice Of Total Small Business Set-aside (oct 2020)(deviation 2020-o0008)|1|| alternate A, Annual Representations And Certifications (oct 2024)|13|||||||||||||| small Business Program Representations (feb 2024)|4||||| annual Representations And Certifications (may 2024)|13|333998|700|||||||||||| notice Of Priority Rating For National Defense, Emergency Perpardeness, And Enrgy Progam Use (april 2008))|2||x| evaluation Of First Article Testing|3|||| please Take Note Of Fat Requirements On This Procurement. a Material Irpod Is Available At The Bpmi Site. Vendor Review Of The Irpod Is Mandatory. unless Otherwise Specified, Pricing For This Quotation Is Valid For 60 Daysafter The Closing Date As Indicated On The Quotation. Please Specify (if Otherthan 60 Days) ______________ Days. If You Are Submitting Your Quote Via Emailor Neco, Please Specify The Number Of Days Pricing Is Valid. all Contractual Documents (i.e. Contracts, Purchase Orders, Task Orders, Delivery Orders And Modifications) Related To The Instant Procurement Are Considered To Be 'issued' By The Government When Copies Are Either Deposited In The Mail, Transmitted By Facsimile, or Sent By Other Electronic Commerce Methods, Such As Email. The Government's Acceptance Of The Contractor's Proposal Constitutes Bilateral Agreement To 'issue' Contractual Documents As Detailed Herein. \ 1. Scope 1.1 In The Event Of A Conflict Between Section "c" And Section "d" Of The Contract/purchase Order, Section "c" Will Take Precedence. 2. Applicable Documents 2.1 Not Releasable To Foreign Nationals (noforn) Distribution Statement - Drawings, Specification, Or Related Technical Documents As Cited In The Irpod Are Subject To Special Export Controls And Each Transmittal To Foreign Govern Ments Or Foreign Nationals May be Made Only With Prior Approval Of The Naval Sea Systems Command. 2.2 Applicable Documents; technical Documents Associated To This Solicitation Or Award Such As; Irpod, Drawings,technical Data, Strs, As Well As Certain Military Specifications, And Commercial Item Descriptions (cid) Etc. May Be Obtained At (https://logistics.unnpp.gov/ecommerce) These Documents, At The Required Revision Levels That Are Associated To Either This Solicitation Or Award, Become A Part Of This Solicitation Or Award Unless Changed By An Admendment To The Solicitation Or Modification To the Award. this Website Requires A Password And Pre-registration. To Obtain Instruction On How To Register And Obtain A Password Contact The Bpmi Website Administrator. 3. Requirements 3.1 Navsup Wss-mech Code N94 Additional Technical Documentation order Of Precedence And Effective Issues Of Cited Documentation Dated: July 2004 a. Order Of Precedence For Document Conflict Resolution: The Technical And Quality Requirements Applicable To Manufacture Of The Material Being Purchased Under This Order Are Contained Or Invoked In One Or More Of The Documents Listed Below. In The Event Of any Inconsistencies Between Any Provisions Of This Order, The Order Or Precedence Shall Be As Follows: 1. Amendments To The Purchase Order/contract 2. Schedule Of Supplies Of The Purchase Order/contract. 3. Terms And Conditions Of The Purchase Order/contract. 4. Individual Repair Part Ordering Data (irpod); Or Master Procurement Specification, As Applicable. 5. Any Invoked Standard Technical Requirements (strs). 6. Drawings Referenced In The Irpod, Or Master Procurement Specification , As Applicable. 7. Specifications Referenced In The Irpod, Master Procurement Specifications Or Drawing(s), As Applicable. b. Effective Issues Of Cited Drawings, Specifications, Standards And Other Documents: 1. The Contractor Shall Comply With The Specified Revisions Of The Documents (i.e. Drawings,specifications,standards And Other Documents) Cited In The Irpod And/or Procurement Specification Contained Herein. The Contractor Shall Obtain Written Approval for The Contracting Officer To Use Document Revisions Other Than Those Specified. When A Later Drawing Revision Is Submitted For Approval, Two Full Size Clear Legible Prints Shall Be Provided. 2. Where Documents Are Referred To Only By The Basic Identification Name Or Number And No Specific Revision Thereto, The Contractor Use Of Any Issue Of The Document Except All Such Revisions Shall Be Dated 1 November 1969 Or Later. c. Use Of Document Revisions In Their Entirety: 1. Contractors Shall Use Revisions To Each Cited Or Referenced Document In Its Entirety Unless The Contractor Obtains Contracting Officer Approval To Do Otherwise (i.e. The Contractor Shall Not Use Portions Of Different Revisions Of A Document). d. Vendor Waiver/deviations On Critical Contracts. 1. Compliance With The Delivery Date And Technical Requirements Of Navsup Wss Critical Repair Part Material Contracts Is Expected. 2. As The Cautionary Note Contained In The Contract States, Seller Intended Use Of Any Material Which Is Not In Full Compliance With The Specified Contract Technical Requirements, Should Be Identified As An Exception In Advance Either At The Time The Quotation is Submitted Or Prior To Manufacture. 3. Requests For Delivery Date Extensions And Waivers/deviations Should Be Accompanied By An Explanation Of The Cause For The Delay, Or The Reason For The Requested Non-conformance With An Offer Of Consideration In The Event The Contracting Officer Concurs With your Request. 4. Requests For Waivers/deviations Should Provide Justification For The Requested Change Including An Evaluation Which Demonstrates That Proposed Non-conformance Will Not Affect The Quality, Form, Fit, Or Function Of The Part. Where A Proposed Alternate Or replacement Item Is Offered, Supporting Technical Data (catalog Page, Drawing (s), Etc.) That Fully Describe The Proposed Item Shall Be Provided For Technical Evaluation. 5. Requests Which Do Not Contain The Above Information Will Be Returned And Will Not Be Submitted To Technical/engineering Review Until Sufficient Justification Is Provided. 6. Requests For Waivers/deviations Shall Be Presented To The Government Quality Assurance Representative (qar) For Comment. The Qar Shall Forward The Request, With Their Comments, Directly To The Post Award Pco Identified In The Contract/purchase Order Within five Working Days After Receipt. e. Exclusion Of Mercury 1. Mercury Or Mercury Containing Compounds Shall Not Be Intentionally Added To Or Come In Direct Contact With Hardware Or Supplies Under This Contract. 4. Quality Assurance 4.1 First Article Test/inspection And Report Submittal-(contractor Destructive Or Non Destructive). the Contractor Shall Conduct First Article Test/inspection On ;one (1); Unit(s) In Accordance With The Irpod Requirements Specified In This Contract/purchase Order. the Contractor Shall Prepare And Submit A Report In Accordance With The Contract Data Requirements List (dd Form 1423). first Article Approval Is Required Prior To Manufacturing The Pco. 4.2 The Quality Assurance Requirements Are Located In The Individual Repair Part Ordering Data (irpod). the Contractor Shall Provide And Maintain An Inspection System Acceptable To The Government Covering The Supplies Herein. records Of All Inspection Work By The Contractor Shall Be Kept Complete And Available To The Government During The Performance Of This Contract And For Such Longer Periods As May Be Specified Elsewhere In The Contract. 5. Packaging 5.1 When The Cleanliness Control Requirements Of One Or More Of The Following Documents Are Invoked: Mil-std-767, Mil-std-2041, Refueling Clean, Or Reactor Plant Clean, The Following Clarification Of Requirements For Mil-prf-23199 Packaging Of Repair Parts applies. (1). The Following Summary Clarifies The Packaging Requirements Of Mil-prf-23199 Pertaining To The Use Of Mil-dtl-24466 Green Poly Bags. The Supplier Remains Responsible For Meeting All Contract Requirements. Suppliers Who Are Unsure Of The Packaging, Packing, and Marking. requirements For A Particular Part Should Request Clarification By Contacting The Navsup-wss Contracting Poc. (a). Paragraph 3.4.2 Of Mil-prf-23199 Discusses Level B Packaging And Refers To Paragraph 3.3.1 For The Method Of Packaging. Paragraph 3.3.1 Provides Several Methods Of Packaging. Packaging In Heat Sealed Envelopes Is Covered In Paragraph 3.3.1.1 Which States, "components Which Are Subject To Cleanliness Controls (see 6.2) Or As Specified (see 6.1) Shall Be Packaged In Heat Sealed Envelopes (see 3.2.2.5 And 3.2.2.5.1)". (2). The Following Conditions Must Be Satisfied In Order For Mil-dtl-24466 Bags To Apply: (a). Paragraph 6.2 Of Mil-prf-23199 Defines Cleanliness Controls As Any Reference To (or Application Of) The Cleanliness Control Requirements Of One Or More Of The Following Documents: Mil-std-767, Mil-std-2041, Refueling Clean, Reactor Plant Clean, Or Other requirements Identified Within The Irpod. the Repair Part Must Have Cleaning Requirements Of One Of The Aformentioned Methods. (b). Paragraph 6.1 Contains Ordering Data Options. Paragraph 6.1(k)2. Provides An Option To Specify The Method Of Packaging To Be Used When Packaging Is Other Than In Accordance With Paragraph 3.3.1.1 Only. If A Contract Specifies Any Additional Requirements for The Use Of Green Poly Bags, Then They Are Required And Take Precedence. (4). The Use Of Fire Retardant Packaging Material Is No Longer Required In Any Navsup-wss N94 Contract. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 1. Nuclear Reactor Publications Assigned Navsea Document And Identification Numbers That Are Not Available From Bpmi E-commerce Web Site Must Be Requested From: contracting Officer navsup Wss-mech code N943 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 requests For "official Use Only" And "noforn" (not Releasable To Foreign Natio Nals) Documents Must Identify The Quotation Number On Pre-award Procurement Actions. Requests Must Be Submitted To The Pco For Certification Of "need-to-know" For The Document. On post-award Actions, The Request Must Identify The Government Contract Number, And Be Submitted Via The Defense Contract Management Agency (dcma) For Certification Of "need-to-know" For The Document. 2. Commercial Specifications, Standards And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. They May Be Obtained From The Publishers Or Societies Of The Applicable Documents. 6.2 In Accordance With Dodi 5230.24 All Documents And Drawings Provided By The U.s. Navy To Prospective Contractors Must Include A "distribution Statement" To Inform The Contractor Of The Limits Of Distribution, And The Safeguarding Of The Information contained On Those Documents And Drawings. There Are 6 (six) Separate Distribution Statement Codes Used For Non-classified Documents And Drawings. The Definition For Each Is As Follows: a... Approved For Public Release; Distribution Is Unlimited. b... Distribution Authorized To Us Governments Agencies Only. c... Distribution Authorized To Us Government Agencies And Their Contractors. d... Distribution Authorized To Dod And Dod Contractors Only. e... Distribution Authorized To Dod Components Only. f... Further Distribution Only As Directed By Commander, Naval Sea Systems Command, Code 09t. 6.3 Information Regarding Abbreviations, Symbols And Codes Appearing On Dd Form 1423 - The Following Information Is Provided To Assist In Understanding The Intent Of The Requirement To Provide A Deliverable Item To The Government. The Explanation Of abbreviation, Symbols And Codes Found In A Block Follows The Block Number As They Appear On The Dd Form 1423. block A: Is The Actual Contract Line Item No. block B: Is The Actual Collective Physical List Of The Deliverable Item(s) Which Are Part Of The Total Requirement Of The Contract/purchase Order. block C: Is The Category Of Data Required, Tdp Is Defined In Mil-t-31000. Tm Is Defined In Part 1x, Section B Of Dodi 5000.2. Navsup-wss Has Reasoned That Most Dd Form 1423's Included In Our Solicitations Meet The Requirement Of Tdp As Navsup-wss Does Not Regularly Purchase Only Technical Manuals Without Purchasing Hardware And Related Tdp Software. Therefore, Most Navsup-wss Dd Form 1423 Category Code Will Be Tdp. block D: Is The Name Of The Parent System, Next Higher Assembly, Or The Item Being Purchased. block E: Is The Purchase Request Number, Request For Proposal Number, Invitation For Bid Number Or Another Number For Tracking And Monitoring Purposes. block F: Is The Successful Offerors Name And Or Cage Code. block G: Is The Name Of The Individual And Or The Code/activity Of The Individual Who Prepared The Dd Form 1423 And Included The Requirement In The Technical Data Package (tdp). block H: Self Explanatory. block I: Is The Name And Signature Of The Individual Who Approved The Content And The Need For Inclusion Of The Dd Form 1423 In The Tdp. block J: Self Explanatory. block 1: Is The Exhibit Line Item Number (elin). block 2: Is The Title Of The Data Item Cited In Block 4. block 3: Is The Subtitle Of The Data Item Cited In Block 4 And Is Used If The Title Requires Clarification. block 4: Is The Actual Data Item Description (did) Number Or The Actual Technical Manual Contract Requirements Number. In The Event The Dd Form 1423 Is Requiring A Technical Manual The Numbered Tmcr Will Be An Attachment To The Contract/purchase Order. block 5: Is The Section And Paragraph Area, Where The Requirement Statement For The Dd Form 1423 Will Be Found. block 6: Is The Activity That Will Inform The Contractor Of Approval, Conditional Approval Or Disapproval Of The Deliverable Item. block 7: Is A Code Which Designates Authority For Inspection And Acceptance Of The Deliverable Item. The Definition Of The Codes Is As Follows: Dd Form 250 Code Inspection Acceptance Ss (1) (2) Dd (3) (4) Sd (1) (4) Ds (3) (5) Lt (6) (7) No (8) (8) Xx (9) (9) (1) Inspection At Source. (2) Acceptance At Source. (3) No Inspection Performed At Source. Final Inspection Performance At Destination. (4) Acceptance At Destination. (5) Acceptance At Source. Acceptance Based On Written Approval From The Contract Officer. (6) Letter Of Transmittal Only. Lt Should Not Be Used When Inspection Is Required. The Data Is Sent By The Contractor Directly To The Personnel Listed In Block 14 Of The Dd Form 1423. Lt Is Used When The Contracting Agency Does Not Desire To Have A Dd Form 250 For Each And Every Piece Of Data Developed By The Contractor. The Only Other Authorized Use Of Lt Is The Special Case Where The Contracting Agency Does Not Desire To Have Separate Dd Forms 250 But Desires To Have A Government Quality Assurance Representative Perform Inspection. The Government Quality Assurance Representative Shall Be Listed On The Distribution In Block 14 And Requested To Provide Comments Via The Quality Assurance Letter Of Inspection. Use Of The Symbol Lt Is Not Authorized For Data Comprising Final Delivery Of Technical Data Package Of For Technical Manuals. (lt May, However, Be Used For Delivery Of Preliminary Tdp's Or Tm's). (7) As Specified In Block 8 Of The Dd Form 1423. (8) No Inspection Or Acceptance Required. No Dd Form 250 Or Letter Of Transmittal Required. Use Of The Symbol No Is Not Authorized For Data Comprising Technical Data Packages Or For Technical Manuals. (9) Inspection And Acceptance Requirements Specified Elsewhere In The Contract. block 8: Is The Approval Code - Items Of Critical Data Requiring Specific Advanced Written Approval Prior To Distribution Of The Final Data Item Will Be Identified By Placing An "a" In This Field. This Data Item Requires Submission Of A Preliminary Draft Prior To Publication Of A Final Document. When A Preliminary Draft Is Required, Block 16 Of The Dd Form 1423 Will Show Length Of Time Required For Government Approval/disapproval And Subsequent Turn-around Time For The Contractor To Resubmit The Data After Government Approval/disapproval Has Been Issued. Block 16 Will Also Indicate The Extent Of The Approval Requirements, E.g., Approval Of Technical Content And/or Format. block 9: Is The Distribution Statement Code Which Explains How The Government Can Circulate The Deliverable Item. The Definition Of Codes A, B, C, D, E, Or F Is As Follows: A. Distribution Of The Item Is Unrestricted. B. Distribution Of The Item Is Limited To Agencies Only. C. Distribution Of The Item Is Limited To Contractors With A Cage Code And Have A Dd Form 2345 On File With The Dla Logistics Information Services (dlis) Battle Creek, Mich. Or Government Activities. D. Distribution Of The Item Is Limited To Dod Activities And Dod Contractors Only. E. Distribution Of The Item Is Limited To Dod Components Only. F. Distribution Of The Item Is Restricted From Foreign Nations And Foreign Nationals. block 10: Is The Frequency Which The Deliverable Item Is Expected To Be Delivered To The Government. The Abbreviations And Their Meaning. Annly Annually Asgen As Generated Asreq As Required Bi-mo Every Two Months Bi-we Every Two Weeks Daily Daily Dfdel Deferred Delivery Mthly Monthly One/r One Time With Revisions Qrtly Quarterly Semia Every Six Months Wekly Weekly Xtime Number Of Times To Be Submitted (1time, 2times...9times) Use Of These Codes Requires Further Explanation In Block 16 To Provide The Contractor With Guidance Necessary To Accurately Price The Deliverable Data Item. Other Abbreviations Not Appearing On The Above List May On Occasion Be Used In Block 10 Of The Dd Form 1423. When Other Abbreviations Are Used They Will Be Fully Explained In Block 16 Of The Dd Form 1423. block 11: Is The Last Calendar Date, Expressed In Year/month/day Format, The Deliverable Item Is To Be Received By The Requiring Office Cited In Block 6 Of The Dd Form 1423 For An Item With A Block 10 Entry Indication A Single Delivery. If The Item Is To Be Submitted Multiple Times, The Number Stated Is The Number Of Calendar Days After The Frequency Cited In Block 10 The Item Is To Be Received By The Requiring Office Cited In Block 6 Of The Dd Form 1423. On Occasion The Deliverable Item Will Be Required To Be Submitted Prior To The End Of The Frequency Cited In Block 6. In That Event The Requirement Will Be Fully Explained In Block 16 Of The Dd Form 1423. block 12: Is The Date Of First Submission Of The Deliverable Item To The Requiring Office (block 4) Expressed In Year/month/day Format. The Abbreviations And Their Meaning Are As Follows: Asgen As Generated Asreq As Required Dac Days After Contract Date Dfdel Deferred Delivery Eoc End Of Contract Eom End Of Month Eoq End Of Quarter Specific Instructions For These Requirements Will Be Provided In Block 16. If The Deliverable Item Is Constrained By A Specific Event Or Milestone The Constraint Will Be Fully Explained In Block 16 Of The Dd Form 1423. "as Generated", "as Required", And "deferred Delivery" Will Always Be Fully Explained In Block 16. block 13: Is The Date Of Subsequent Submission Of The Deliverable Item, After The Initial Submission. Subsequent Submission Is Only Used To Indicate The Specific Time Period. The Data Is Required When Block 10 Of The Dd Form 1423 Indicates Multiple Delivery Is Required. This Does Not Apply To Resubmission Of A Deliverable Item That Has Been Reviewed By The Requiring Office And Determined To Be Only Conditionally Acceptable Or Unacceptable. block 14a: Will Contain The Activity Name(s) Where The Deliverable Item Is To Be Sent. If The Activity Is Other Than Dcma Or Navsup-wss The Full Name, Address (including Code) Will Be Specified. That Specific Information Will Be Located In Block 16 Of The Dd Form 1423. block 14b: Is The Number Of Copies Of Draft And Or Final Copies To Be Submitted. When Final "repro" Copies Are To Be Submitted Block 16 Will Clarify The Type Of Repro Copies Required. (e.g., Vellum, Negative, Etc.) block 15: Is The Total Of Each Type Of Copies To Be Submitted As Required By Block 14. block 16: Is The Block Used To Provide Additional Or Clarifying Information Blocks 1 Through 15. This Block Is Also The Only Area Used To Tailor The Document Listed In Block 4. Only Deletions To The Minimum Requirements Stated In The Document In Block 4 Are Allowed. Block 16 May Also Be Used To Specify The Medium For Delivery Of The Data. block 17: Is The Block Where The Bidder Or Offeror Is To Enter The Appropriate Price Group. The Price Groups Are Defined As Follows: A. Group I - Data Which The Contractor Prepares To Satisfy The Government's Requirements. The Contractor Does Not Need This Type Of Data To Perform The Rest Of The Contract. Price Would Be Based On Identifiable Direct Costs, Overhead, General And Administrative (g&a) And Profit. B. Group Ii - Data Essential To Contract Performance Which Must Be Reworked Or Amended To Conform To Government Requirements. The Price For Data In This Group Would Be Based On The Direct Cost To Convert The Original Data To Meet Government Needs And To Deliver It, Plus Allocable Overhead, G&a And Profit. C. Group Iii - Data Which The Contractor Must Develop For His Own Use And Which Requires No Substantial Change To Conform To Government Requirements Regarding Depth Of Content, Format, Frequency Of Submittal, Preparation, And Quality Of Data. Only The Costs Of Reproducing, Handling And Delivery, Plus Overhead, G&a And Profit, Are Considered In Pricing Data In This Group. D. Group Iv - Data Which The Contractor Has Developed As Part Of His Commercial Business. Not Much Of This Data Is Required And The Cost Is Insignificant. The Item Should Normally Be Coded "no Charge." An Example Is A Brochure Or Brief Manual Developed For Commercial Application Which Will Be Acquired In Small Quantities, And The Added Cost Is Too Small To Justify The Expense Of Computing The Charge That Otherwise Would Go With The Acquisition. block 18: Enter The Total Estimated Price Equal To That Portion Of The Total Price Which Is Estimated To Be Attributable To The Production Or Development For The Government Of That Item Of Data. The Entry "n/c" For "no Charge" Is Acceptable. mark The Packaging Label With The Nomenclature: se Rng Cee Can Jt C in Lieu Of: seal Ring,nuclear C \ date Of First Submission=045 Dac submit For Approval One Package (iaw Di-qcic-8871) Of All Applicable Procedure, Drawing And Other Pre-manufacturing Submittals, Listed On The Individual Repair Part Ordering Data (irpod) Document(s) And Detailed In The Cited Specification, Within 45 Days After contract Award To The Contracting Officer (navsup-wss Code N9433). See Irpod For Individual Documents Required. a Separate Package Will Be Prepared And Submitted For Each Unique Combination Of Contract Number, National Stock Number, And Item Nomenclature Specified In The Schedule Of Supplies/services. di-qcic-a8871 Cited In Block 4 Is A Unique Navsup-wss Dd1423 Sequence Control Number - Procedure Package To Be Iaw Did Di-qcic-8871(latest Rev). date Of First Submission=eoc submit To Navsup-wss, Code N9433 For Review, A Complete Package Of All Applicable Vendor Certified Reports Of Test And Inspection Per Di-qcic-8872(latest Rev) See (individual Repair Parts Ordering Data) Irpod For Individual Documentsrequired. the Package Will Be Submitted Per The Contract Delivery Schedule, And Authorization To Ship Material Must Be Obtained From The Pco. a Separate Package Will Be Prepared And Submitted For Each Unique Combination Of Contract Number, National Stock Number, And Item Nomenclature Specified In The Schedule Of Supplies/services. di-qcic-a8872s Cited In Block 4 Is A Unique Navsup-wss Dd1423 Sequence Control Number - Roti Package To Be Iaw Did Di-qcic-8872(latest Rev). date Of First Submission=045 Dac submit For Approval One Package Iaw Di-qcic-8874 Which Identifies The Lower Tier Suppliers Of Material, Supplies And Services. this Package Shall Be Submitted Within 45 Days After Contract Award To The Contracting Officer, Navsup-wss, Code N9433. a Separate Package Will Be Prepared And Submitted For Each Unique Combination Of Contract Number, National Stock Number, And Item Nomenclature Specified In The Schedule Of Supplies/services. di-qcic-a8874a Cited In Block 4 Is A Unique Navsup-wss Dd1423 Sequence Control Number - Roti Package To Be Iaw Did Di-qcic-8874(latest Rev). date Of First Submission=asreq submittal Requirements Specified In The Irpod, Under Paragraph 6.1, Contract Data Requirements, Shall Be In Accordance With Either Of The Following: 1. When Specified For Contractor Submittal Of Reports Prior To Manufacturing For Approval, Then The Report Shall Be Submitted For Approval, In Accordance With The Contract Delivery Schedule. Authorization To Start Production Must Be Obtained From The Pco. a Separate Package Will Be Prepared And Submitted For Each Unique Combination Of Contract Number, National Stock Number, And Item Nomenclature Specified In The Schedule Of Supplies/services. resubmittal Not Later Than 45 Days After Disapproval. 2. When Specified For Contractor Submittal Of Report Per The Contract Delivery Schedule, Then The Report Shall Be Submitted For Approval Per The Contract Delivery Schedule And Authorization To Ship Material Must Be Obtained From The Pco. a Separate Package Will Be Prepared And Submitted For Each Unique Combination Of Contract Number, National Stock Number, And Item Nomenclature Specified In The Schedule Of Supplies/services. dindtia80809a Cited In Block 4 Is A Unique Navsup-wss Dd1423 Sequence Control Number - Report Package To Be Iaw Did Di-ndti-80809(latest Rev).