Paint Tenders

Details: Description Republic Of The Philippines Province Of Samar Municipality Of Villareal Invitation To Bid Construction Of Child Development Center Brgy Conant, Villareal, Samar October 29, 2024 Date 1. The Municipal Government Of Villareal, Samar, Now Invites Bids For The Repair Of Legislative Building At Poblacion, Villareal, Samar Which Has An Approved Budget For The Contract (abc) Of Five Hundred Thousand Pesos (500,000.00) 2. Completion Of Works Is Required Within 33 Calendar Days. The Description Of An Eligible Bidder Is Contained In The Bidding Documents. Description Of Works Item Of Work Scope Of Work Quantity Unit I Removal Of Existing Structure 1 Lot Ii Carpentry & Concrete Works 50.0 Sq M Iii Painting Works 1 Lot Iv Doors And Windows 0.35 Sqm V Ammenities 1 Lot Spcl 1 Billboard 1 Lot Spcl 2 Construction Safety & Health 1 Lot Spcl 3 Mobilization/demobilization 1 Lot Spcl Ii Billboard 1 Lot Spcl Iii Mobilization/demobilization 1 Lot 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Nondiscretionary Pass/fail Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The Government Procurement Reform Act”. 4. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organization With At Least Seventy Five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Filipino Citizens. 5. Interested Bidders May Obtain Further Information From The Bac Chairperson, And Inspect The Bidding Documents Within The Period October 29 To November 18, 2024, 8:00am To 5:00pm, Monday To Friday At The Office Of The Bids And Awards Committee, Lgu Villareal, Samar. 6. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders From The Address Below And Upon Payment Of A Non-refundable Fee For The Bidding Documents In The Amount Of Two Thousand Pesos (2,000.00) 7. Bids Must Be Delivered To The Address Below On Or Before November 19, 2024 At 8:00 A.m. At The Office Of The Bac, Municipal Hall, Villareal, Samar. All Bids Must Be Accomplished By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb. 8. Bids Will Be Opened On November 19, 2024 At 9:00 A.m. At The Municipal Hall, Villareal, Samar In The Presence Of The Bidders Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 9. The Municipal Government Of Villareal, Samar Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incoming Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Ms Nerissa A. Mustacisa Bac Chairperson, Municipal Hall, Villareal, Samar (sgd.) Ms Nerissa A. Mustacisa Bac Chairman

Details: Description Supply And Delivery Of Forage Chopper Abc: P1,800,000.00 8 Units Forage Chopper A. Prime Mover - Rated Power: 8.9 Kw, Minimum - Cooling System: Water Cooled - Engine Type: Single Cylinder, Diesel Engine - Specific Fuel Consumption @ Maximum Output Power: 350g/kw-hr, Maximum - Continuous Power: At Least 85% Of The Rated Power, Minimum - Starting System: Manual Cranking B. Design And Performance - With 3 Set Blade Chopping Machine - Hardness Of Blade: Tool Steel - Average Output Size: 1-2 Inches - Shall Produce Clear-cut Chopped Materials - Knife Shall Be Individually Adjustable, Replaceable And Can Be Easily Be Sharpened - Output Capacity: 1 Ton/hr, Minimum - Discharge Mechanism: Blow-up Type/ Throw Away Type - Mobility: With Two (2) Brand New Pneumatic Tires (manufactured Not Earlier Than 2024, Size: 14) C. Tools - With Set Of Standard Tools 1. One (1) Set Of Combination Wrench (size:8-22mm, Minimum) 2. One (1) Pair Of Mechanical Pliers 3. One (1) Piece Each Or Combination Of Philips And Flat Screw-driver D. Other Requirements: - With Da Logo (sticker/painted, 4 Inches In Diameter) - With Amtec Test Result For Forage Chopper And Engine - With Namdac Certificate - Pto Certificate By Bafe - Materials And Other Components Shall Be All Brand New. - Provide Diesel Fuel (full Tank) And Engine Oil In Every Units - Specification Should Be Signed And Sealed By An Abe With Valid Prc Id And Ptr - Should Have Service Center Within The Region - The Technician/s Of The Mfaddies And Or Its Accredited Service Center Must Have A Tesda National Certificate Ii (ncii) Relevant To The Job Or An In House Training. - No Reported Major Breakdown For Products Under Warranty In The Last 72 Hours Upon Receipt Of Complaint/s. - Control Instructions And Label Of The Machine&engine Should Be In English. - Must Conduct Training In Operations And Maintenance On Recipients. E. Warranty 1 Year Warranty On Machine & 2 Years Warranty On Engine Delivery Period: 45 Calendar Days Delivery Site: Da Tupi Research And Experiment Station, Bololmala, Tupi, South Cotabato - Note: All Units Shall Be Inspected @ Da-tupi Res, Including The Conduct Of Acceptance Testing & Operations And Maintenance Training To The Recipient. Delivered On Site After The Conduct Of Acceptance Testing & Operations And Maintenance Training Cost Of Bidding Documents: P5,000.00 Note For Prospective Bidders: 1. During Buying Of Bidding Document: Must Submit Letter Of Intent (loi) And Present The Following Eligibility Document: A. Certificate Of Registration From Philgeps (platinum Membership) B. Registration Certificate From Sec/dti/cda C. Mayor/business Permit D. Tax Clearance 2. In Case Of Representative: Must Submit A Copy Of Board Resolution Or Secretary’s Certificate/special Power Of Attorney Whichever Is Applicable Coupled With Specimen Signature.

Details: Description Republic Of The Philippines Province Of Masbate Municipality Of Mandaon Bids And Award Committee Invitation To Apply For Eligibility And To Bid The Local Government Unit Of Mandaon, Through The Lgsf-fa-sbdp 2024 Intends To Apply For The Sum Of Php 7,500,000.00 Being Approved Budget For The Contract (abc) Projects. Lgu-mandaon Bids And Award Committee (bac) Invites Suppliers/contractors To Apply For Eligibility And To Bid For The Procurement Of Works For The Hereunder Projects: Item No. Project Description Abc Amount Contract Duration 1 Installation Of Solar Street Light (alas) (installation Of One Hundred Twenty (120) Units Solar Street Light; Construction Of Concrete Pedestal) Php 2,500,000.00 60 C.d 2 Installation Of Solar Street Light (san Juan) (installation Of One Hundred Twenty (120) Units Solar Street Light; Construction Of Concrete Pedestal) Php 2,500,000.00 60 C.d 3 Construction Of One-storey Two-classroom School Building (construction Of 1-storey 2-classroom Bldg. Including; General Requirements; Civil Works; Masonry; Roof And Roof Framing Works; Doors And Windows; Painting Works; Ceiling Works; Electrical Works, Plumbing Works) Php 2,500,000.00 180 C.d. Prospected Bidders Should Possess A Valid Pcab Applicable To The Contract And Have Completed A Similar Contract With A Value Of At Least 50%. The Eligibility Check/screening As Well As The Preliminary Examination Of Bids Shall Use Non-discretionary “pass/fail Criteria”. The Bac Will Conduct Post Qualification Of The Lowest Calculated Bid. All Particulars Relative To Eligibility Statement And Screening, Bid Security, Performance Security, Pre-bidding Conference, Evaluation Of Bids, Post-qualification And Award Of Contract Shall Governed By The Provisions Of Implementing Rules And Regulation (irr) Of Republic Act 9184 (ra 9184). The Schedule Of Activities Are As Follows: 1. Deadline Of Submission Of Loi -------------- November 28, 2024 2. Availability Of Bid Documents --------------- November 18, 2024 3. Pre-bid Conference ---------------------------- November 19,2024, 9:30 Am 4. Deadline Of Submission Of Bids ------------- December 2, 2024 8:30 Am At Office Of Bac Chairman 5. Opening Of Bids --------------------------------- December 2, 2024, 9:30 Am At Office Of Bac Chairman Bidding Documents May Be Secured By Interested Bidders From The Office Of Bac Secretariat Upon Payment Of A Non-refundable Fee For The Bidding Documents. It May Also Be Downloaded From The Website Of The Philippine Government Electronic Procurement System (philgeps), Provided That The Bidders Shall Pay The Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. For Further Information, Please Contact Lou Angelo Sevilla, Bac Secretary At The Above Address Or Cp # 0937057107 Email Add: Shawiealita@gmail.com. Approved By: Sgd Engr. Melyn Rosita-escape Bac Chairman Noted: Sgd Kristine Salve Hao-kho, Rn Municipal Mayor

Details: Description Request For Quotation (rfq) Date: 13 November 2024 Rfq No.: 5319-2024 The Philippine Ports Authority (ppa), Pmo-surigao, Through Its Bids And Awards Committee (bac), Hereby Notifies Entities Duly Registered With The Philippine Government Electronic Procurement System (philgeps) To Offer For The Hereunder Contract, To Be Implemented Thru Negotiated Procurement (small Value Procurement) Pursuant To Rule Xvi, Section 53.9 Of The Revised Implementing Rules And Regulations Of R.a. 9184. Project Title : Lumpsum Materials, Labor & Equipment For The Miscellaneous Maintenance Works On Dilapidated Main Entrance Steel Gate, Port Of San Jose, Province Of Dinagat Islands Project Location : Port Of San Jose, Province Of Dinagat Islands Scope Of Works : 1. Demolition And Removal Works 2. Fabricate And Install Pedestrian Gate And Vehicle Sliding Steel Gate 3. Fabricate And Install Steel Runner Track 4. Painting Works Of Metal Surfaces Approved Budget For The Contract : Php 385,241.85 Contract Duration : 45 Calendar Days Source Of Funds : Ppa Corporate Funds Cy 2024 Interested Bidders Must Present Original Copy Of Special Power Of Attorney (spa) From The Owner If Done By Representative And Secure Signed Request For Quotation Form (rfq) For Your Quotation From Bac Secretariat/procurement Officer And Submit Sealed Canvass Together With Herein Documents: 1. Certified True Copy Of Valid Dti Business Name Registration Or Sec Registration 2. Certified True Copy Of Valid And Current Mayor’s Permit 3. Certified True Copy Of Valid Phil-geps Registration 4. Certified True Copy Of Pcab License 5. Certified Income/business Tax Returns 6. Omnibus Sworn Statement Deadline Of Submission Of Sealed Quotation: November 20, 2024 9:00 Am Opening Of Sealed Quotation : November 20, 2024 10:00 Am Place Of Opening : Pmo-surigao Admin Building, Surigao City Please Submit Your Duly Signed Quotation Addressed To The Bids And Awards Committee (bac) Chairperson And To The Given Address Below, On Or Before 9:00 Am Of 20 November 2024, Subject To The Compliance With Terms And Conditions Provided On This Request For Quotation (rfq): Atty. Roldan G. Calejesan Chairperson, Bids And Awards Committee Pmo-surigao Admin Building, Port Area, Surigao City Tel./fax Nos. (086) 827-1664; (086) 827-5641; (086) 827-5643 Email Add: Pmosurigaobac@gmail.com The Head Of The Procuring Entity (hope) Of The Philippine Ports Authority (ppa), Pmo-surigao Reserves The Right To Reject Any And All Quotations, Declare A Failure Of Procurement, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Any Clarification, You May Contact The Bac Secretariat At Tel./fax Nos. (086) 827-1664; (086) 827-564; (086) 827-5643 Or Send Email To Pmosurigaobac@gmail.com (sgd) Atty. Roldan G. Calejesan Chairperson, Bids And Awards Committee

Details: Rfq Type Goods Goods Furniture & Accessories Reference Number Gl12500381 Title Plastic Chairs&steel Cabinet Description 111 Activity Unit X Plastic Chairs 4 Activity Unit X Steel Cabinet Specification* Please Supply As Per Specification Below Deliver At Somerset West Municipal Building, Corner Victoria <(>&<)> Andries Pretorius Streets, Somerset West Contact Andisiwe Nombila 0214007064 Specification Material Polyprpylene Colour Black Weight Loading 120kg Seat Height 440mm Height Backrest 785mm Dimensions 586 (l) X 575 (w) X 800 (h) Mm Mild Steel Legs Painted Silver "1. Nb The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation,supplier To Complete Rfq Sample Checklist Attached To Ad 2. Please Ensure That You Attach The Technical Data Sheets And Pictures Of The Item Quoted On, To Your Rfq Submission****failure To Adhere To This Requirement, May Result In Your Offer Being Non-responsive**** # Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent# * Please Supply As Per Specification Below Deliver At Somerset West Municipal Building, Corner Victoria <(>&<)> Andries Pretorius Streets, Somerset West Contact Andisiwe Nombila 0214007064 Specification Lockable Filing Cabinet Colour Hammertone Grey Material Steel Drawers 4 Drawers External Dimensios 1300 (h) X 470 (w) X 630 (d) Mm Delivery Date2024/12/02 Delivery Tocs - City Health Csch Delivery Address0 Somerset West Municipal Building, Somerset West Contact Personandiswe Nombila Telephone Number0214007064 Cell Number Closing Date2024/11/18 Closing Time04 00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 2 Buyer Email Addressgl1.quotations@capetown.gov.za Buyer Detailsc.williams Buyer Phone0214001789 Attachments No Attachments Note On 1 August 2018 The City Of Cape Town Went Live With E-procurement Which Was Piloted With 3 Commodities Clothing, Building Hardware And Is&t. No Manual Submissions Will Be Accepted For These Commodities And Suppliers Must Log In To E-services Portal To Access Rfqs. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.

Details: Description Supply And Delivery Of 3 Units Forage Chopper Abc: P1,050,000.00 Specifications: A. Prime Mover - Rated Power: 12 Hp, Minimum - Cooling System: Water Cooled - Engine Type: Single Cylinder, Diesel Engine - Specific Fuel Consumption @ Maximum Output Power: 350g/kw-hr, Maximum - Continuous Power: At Least 85% Of The Rated Power, Minimum - Starting System: Manual Cranking B. Design And Performance - With 3 Set Blade Chopping Machine - Hardness Of Blade: Tool Steel - Average Output Size: 1-2 Inches, Maximum - With 8000 Pcs Silage Bag Per Forage Chopper - (dimension:25 Inches (width) X 50 Inches (height) X 0.03 Cm (thickness))" - Shall Produce Clear-cut Chopped Materials - Knife Shall Be Individually Adjustable, Replaceable And Can Be Easily Be Sharpened - Output Capacity: 1 Ton/hr, Minimum - Discharge Mechanism: Blow-up Type/ Throw Away Type - Mobility: With Two (2) Brand New Pneumatic Tires (manufactured Not Earlier Than 2023, Size: 14) C. Tools - With Set Of Standard Tools (all Items Must Be Compatible To The Offered Unit): 1. One (1) Set Of Combination Wrench (size:8-32mm, Minimum) 2. One (1) Pair Of Mechanical Pliers (size: 8inch, Minimum) 3. One (1) Piece Each Or Combination Of Philips And Flat Screw-driver D. Other Requirement: - With Da Logo (metal Plated & Revited Or Painted, 4 Inches In Diameter) - With Amtec Test Result For Forage Chopper And Engine - With Namdac Certificate - Pto Certificate By Bafe - Materials And Other Components Shall Be All Brand New. - Provide Diesel Fuel (full Tank) And Engine Oil In Every Units - Specification Should Be Signed And Sealed By An Abe With Valid Prc Id And Ptr - Should Have Service Center Within The Region - The Technician/s Of The Mfaddies And Or Its Accredited Service Center Must Have A Tesda National Certificate Iii(nciii) Relevant To The Job Or An In House Training. - No Reported Major Breakdown For Products Under Warranty In The Last 72 Hours Upon Receipt Of Complaint/s. - Control Instructions And Label Of The Machine&engine Should Be In English. - Must Conduct Training In Operations And Maintenance On Recipients. - The Brand Of The Engine/ Prime Mover To Be Offered Shall Be In Existence In The Philippine Market For At Least 20 Years From The Date Of Invitation To Bid. E. Warranty - 1 Year Warranty On Machine & 2 Years Warranty On Engine - Delivery Period: 30 Calendar Days - Delivery Site: Municipality Of Maasim Municipality Of T’boli Municipality Of Bagumbayan - Cost Of Bidding Documents: P5,000.00 1. During Buying Of Bidding Document: Must Submit Letter Of Intent (loi) And Present The Following Eligibility Document: A. Certificate Of Registration From Philgeps (platinum Membership) B. Registration Certificate From Sec/dti/cda C. Mayor/business Permit D. Tax Clearance 2. In Case Of Representative: Must Submit A Copy Of Board Resolution Or Secretary’s Certificate/special Power Of Attorney Whichever Is Applicable Coupled With Specimen Signature.

Details: Description The Department Of Agriculture-rfo 3, Invites Interested Suppliers To Submit Quotations/proposals For The Hereunder Requirement, To Wit: Item No. Qty. Unit Items & Description Unit Price Total Amount Brand/ Model Supply And Delivery Of 27 Units Portable Water Pump To Be Distributed For The Beneficiaries Of Corn Livelihood Projects Under Saad Program For Cy 2024 27 Units Portable Water Pump Engine Type: Gasoline Engine, Air Cooled, Single Cylinder, 4 Stroke Power Requirement/rated Power: 5hp (min) Fuel Tank Capacity: 2.8 Liters (min) Oil Capacity: 0.6 Liter (min) Starting System: Recoil/electric Start Rated Maximum Output Power: 80% Minimum Rated Continuous Output Power: 80% Of Rated Maximum Power Maximum Noise Level: 92 Db, Maximum For 6 Hours Continuous Operation Pump Pump Type: Self-priming, Centrifugal Inlet And Outlet Size: (2.0") Min. Pump Lift: 25m. (min.) Suction Height: 8m. (min.) Equipped With Sealed-type Bearings To Prevent Entry Of Contaminants Accessories Included Engine Tool Kit (1set) Strainer (1pc.) Hose Coupling (2pcs.) Hose Band (3pcs.) Flexible Hose (3m) Other Requirements: Certificate Of Warranty: 1 Year With Reflectorized Or Spray-painted Da-saad Logo With Basic Tools And Accessories: 2 Pcs Open Wrenches; 1 Pc Adjustable Wrench; And 1 Pc Each Of Phillips Required And Flat Screwdriver And Combination Availability Of Spare Parts Within Region 3 Operator Manual With Valid Amtec Test Report (coupled) Conformity To Pns/bafs 192:2024-after Sales Service-guidelines Conformity To Paes 116:2000-agricultural Machinery-small Engine-specification And Paes 114:2000-agricultural Machinery - Centrifugal Pump-agricultural And Biosystems Engineer) Submit Permit To Operate (pto) From Bafe During Opening Of Bids Certificate Of Availability Of Stocks Grand Total Bid Amount In Words Approved Budget For The Contract (abc) "nine Hundred Seventy-two Thousand Pesos (php 972,000.00)" Interested Suppliers May Download And Examine The Attached Request For Quotation Form By Clicking The Figure Opposite The Associated Components On This Page. The Department Of Agriculture-rfo 3 Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expenses Incurred In The Preparation Of The Quotation. Note: Interested Suppliers Must Download The Attached Document. Here’s The Procedure On How To Download The Attached Document. 1. To Order The Associated Component Of This Bid Notice, Please Click The “order” Link. 2. Upon Clicking The Order Link, The Order Basket Page Will Be Displayed. To Proceed The Ordering Of The Document In The Order Basket Page, Click The “continue” Button. 3. The System Will Display The Order Confirmation Page. To Confirm The Order, Click The “submit” Button. 4. The Order Summary Page Will Be Displayed. To View Or Download The Associated Documents, Click The Document Hyperlink Under The Item Column. 5. To Return To The Bid Notice Abstract Page, Click The “done” Button.

Details: This Prior Information Notice 5 (pin 5), Without Call For Competition, Is To Alert The Market That Sellafield Ltd Is Continuing With Market Engagement Activity For The Forthcoming Project And Asset Care Execution (pace) Contract Opportunity. This Pin 5 Supplements The Previous: • Pin 1 Reference Cf-0113800d4l000000iavzuae • Pin 2 Reference Cf-0133500d4l000000iavzuae • Pin 3 Reference Cf-0155800d4l000000iavzuae • Pin 4 Reference Cf-0188400d4l000000iavzuae; And • Pin 4a Reference Cf-0191900d4l000000iavzuae As A Result Of This Fifth Pin And As Part Of The Ongoing Market Engagement Activity, Sellafield Ltd Is To Provide Information To The Market In Relation To The Pace Opportunity, This Includes Proposed Timescales For The Pace Procurement, Lotting Strategy Including Bidding & Award Rules; Updates In Relation To Aspects Of The Commercial Model / Pace Opportunity Arising From Pin 3 Feedback; And Summary Of Key Commercial Principles & Incentivisation Model. These Are Set Out In The Supporting Pace Pin Market Engagement Information Document Shared Via Atamis, As Referred To In Ii.2.14.1 Additional Information. The Majority Of The Work Will Take Place In Operational Nuclear Facilities And In Radiologically Controlled Areas. The Work Involves Maintaining Existing Asset Condition And Providing New Asset Capabilities When Needed. With The Description Provided Again As High-level Examples Only, The Capabilities That Will Be Required Fit Broadly Into The Following Work Disciplines And Service Types: - Civil Works, Including Roofing, Painting, Fencing, Roads And Paths Etc.; - Mechanical Works, Including Heating And Ventilation, Pipework, Steelwork Etc.; - Electrical Works, Including Building Lighting, Alarm Systems, Instrumentation Etc; And - Project Works, Including Project, Contract & Cost Management Etc. The Proposed Strategy For The Agreement Duration Is A 9+6 Framework Up To A Maximum 15-year Term. The Value Of The Work Will Be Subject To Ongoing Governance And Approval On An Annual Basis, But For Planning Purposes The Mid-range Estimate Of The Anticipated Framework Value Across All The Work Package Categories For The Maximum Duration Of 15 Years Is £2,400,000,000 (£2,400m). If You Are Not Already Registered On Atamis, You Can Access Using The Record Reference C17465 By Visiting The Url Https://atamis-2464.my.site.com/s/welcome For The Pace Pin 5 Market Engagement Information And The Pace Rfi Template Documents Referred To Above. If You Are Interested In Providing Feedback On Proposed Contract Model Construct Types, You Should Again Access To Atamis Using Record Reference C17465 And Upload Your Completed Rfi Template By Attaching It To A Message Using The 'new Messages' Functionality. Completed Rfis Should Be Returned By 12:00 On Friday 22nd November 2024.

Details: Description Supply And Delivery Of 5 Units Corn Mill Abc: P1,750,000.00 Specifications: Engine - 12 Hp(minimum), Single Cylinder, Diesel Engine, Four Stroke - Cooling System: Water Cooled - Continuous Power: Atleast 85% Of The Rated Power - Specific Fuel Consumption @ Maximum Output Power:300g/kw-hr, Maximum - Starting System: Manual Cranking Design And Performance - Input Capacity: 200 Kg/hr, Minimum - Type Of Grinding Assembly: Steel Huller - Degermer Efficiency: 80%, Minimum - Main Product Recovery: 55%, Minimum - Total Machine Loss: 5%, Maximum Noise Level:100 Db(a), Maximum - With Belt Guard On Belt And Pulley All Components That Are In Contact With The Product Must Be Made Of Stainless Steel/ Food Grade Materials Accessories - With One (1) Spare Grinder - With Collecting Bin For Discharge Outlet Including Dust Collection System - Shall Provide Engine Oil In Every Unit - Shall Provide Standard Tools For Maintenance Of The Machine (1 Set Open Wrench, 1 Pc Philips And Flat Screw Drivers, 1pc Grease Gun, 1 Pc Adjustable Wrench And 1 Pc Mechanical Plier) - With Pulleys, Belts, Belt Dressing And All Other Accessories - With Operator’s Manual Other Requirements - With Da Logo (painted/ Metal Plated & Riveted, 8 Inches In Diameter) - With Valid Amtec Test Result For Machine And Engine - With Certificate Of Conformity - With Namdac Certificate - With Pto Certificate By Bafe - Materials And Other Components Shall Be All Brand New - Specification Should Be Signed And Sealed By An Rpabe With Valid Prc Id And Ptr - Should Have Service Center Within The Region - The Mfaddies And Or Its Accredited Service Center Must Have A Tesda National Certificate Iii (nc Iii) Relevant To The Job Or An In House Training. - No Reported Major Breakdown For Products Under Warranty In The Last 72 Hours Upon Receipt Of Complaint/s - Control Instructions And Label Of The Machine & Engine Should Be In English - Must Conduct Training In Operations And Maintenance On Recipient/s - The Brand Of The Engine/ Prime Mover To Be Offered Shall Be In Existence In The Philippine Market For At Least 20 Years From The Date Of Invitation To Bid - Note: All Units Shall Be Inspected @ Da-tupi Res, Including The Conduct Of Acceptance Testing & Operations And Maintenance Training To The Recipient. - The Supplier Shall Provide Fuel During Conduct Of Testing . - Delivery Period: 30 Calendar Days - Delivery Site: Da-tupi Res, Bololmala, Tupi, South Cotabato - Cost Of Bidding Documents: P5,000.00 1. During Buying Of Bidding Document: Must Submit Letter Of Intent (loi) And Present The Following Eligibility Document: A. Certificate Of Registration From Philgeps (platinum Membership) B. Registration Certificate From Sec/dti/cda C. Mayor/business Permit D. Tax Clearance 2. In Case Of Representative: Must Submit A Copy Of Board Resolution Or Secretary’s Certificate/special Power Of Attorney Whichever Is Applicable Coupled With Specimen Signature.

Details: Description Invitation For Negotiated Procurement For Scientific, Scholarly Or Artist Work, Exclusive Technology And Media Services Procurement Of Service Provider (entertainers / Artists) – Jasaan Town Fiesta 2024 Mayor’s Office, Lgu – Jasaan, Jasaan, Misamis Oriental Procurement Reference No.: Negosec53.6-goods-2024-005 1. The Local Government Unit Of Jasaan Through Its Bids And Awards Committee Intends To Procure A Service Provider (entertainers / Artists) – Jasaan Town Fiesta With An Approved Budget For The Contract (abc) Of Nine Hundred Twenty Five Thousand Pesos And 00/100 (php 925,000.00). 2. The Local Government Unit Of Jasaan And Its Bids And Award Committee (bac) Negotiates Technically, Legally, And Financially Capable Suppliers For The Said Project. 3. The Procurement Procedure For This Requirement Is Negotiated Procurement For Scientific, Scholarly Or Artist Work Exclusive Technology And Media Services Pursuant To Section 53.6 Of 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. I. The Requirement Is For: A. Work Of Art; Commissioned Work Or Services Of An Artist For A Specific Artist Skill (e.g., Singer, Poet, Writer, Painter, Sculptor, Etc.); B. Scientific, Academic, Scholarly Work Or Research, Or Legal Services; C. Highly-specialized Life-saving Medical Equipment, As Certified By The ```` Department Of Health (doh); D. Scientific, Technical, Economic, Business, Trade Or Legal Journal, Magazine, Paper, Subscription, Or Other Exclusive Statistical Publications And References; Or E. Media Documentation, Advertisement, Or Announcement Through Television, Radio, Newspaper, Internet, And Other Communication Media. 4. The Successful Best Offer / Financial Proposal Shall Be Submitted On The Date Of The Negotiation Conference And Which Would Meet The Minimum Technical Specifications Required. 5. The Local Government Unit Of Jasaan, Bids And Award Committee (bac) Will Hold The Negotiation Conference On 19 November 2024 At 10:00 Am At The Administrative Conference Room, 2nd Floor, New Municipal Hall Building, Upper Jasaan, Jasaan, Misamis Oriental. 6. Three (3) Copies Of The Proposals (original Copy, Copy No. 1 And Copy No. 2) Must Be Submitted During The Negotiation Conference. A. Eligibility And Technical Documents A. Valid Philgeps Registration Certificate (platinum Membership), Including The Annex/es; B. Updated Business Permit C. Updated Income Tax Return (500k Above) B. Financial Documents D. Financial Proposal 7. The General Conditions Of The Contract (annex “c”) And Special Conditions Of The Contract (annex “d”) Shall Form Part Of The Contract. Other Conditions Of The Contract Shall Be Governed By The Implementation Of The Rules And Regulations Of Ra 9184 And Other Related And Applicable Laws. 8. The Head Of The Procuring Entity Reserves The Right To Reject And All Bids, Declare Failure Of Bidding, Or Not Award The Contract In Accordance With Section 41 Of The 2016 Revised Implementing Rules And Regulations. Issued This 12th Day Of November 2024. By The Authority Of The Bids And Awards Committee: Allan A. Jumuad Chairperson, Bids And Awards Committee