Paint Tenders

Details: Title: Dynamic Purchasing System For Transport Container Systems, Prefab System, Design, Service And Repair/maintenance description: Dalo Is Looking To Set Up A Dynamic Purchasing System (hereafter Dps) For Container Systems, Prefabs And Service (hereafter Cs-prefab). The Dps Is A Purchasing Method, Where An Economic Operator Can Apply For Prequalification In The Dps. The Dps Is A Purchasing Method, Where An Economic Operator Can Apply For Prequalification In The Dps. Approved Economic Operators Will Be Participants In The Dps. When An Economic Operator Has Been Prequalified As Participant In The Dps, The Economic Operator (now Participant In The Dps) Can Submit Offers On Published Tenders In The Dps. There Is No Limit On The Number Of Economic Operators That May Join The Dps. New Economic Operators Can Also Apply To Join The Dps At Any Point During The Lifetime Of The Dps. Economic Operators Should Note However, That Admission Into The Dps Is Not A Guarantee Of Being Awarded Any Contracts, And There Is Also No Guarantee Of Volume Or Value Of Tenders In The Dps. The Dps Is Divided Into Eight Categories Where It Shall Be Possible To Buy Items And Accessories. Common Characteristics For The Container Systems Is That They Are All Corresponding To Iso Container Standards And Have A Variety Of Sizes From 10ft To 40ft With 20ft Being The Standard Size. They Are Intended For Common Iso Handling Tools And Are To Be Transported Via Road, Sea, Air And Rail - Both Nationally And Internationally With All Kind Of Goods. All Of The Container Systems In This Dps Is Ex-pected To Be Or To Be Based On Standard Commercial Products (cots). Category 1 – Standard Transport Container Systems - Used. These Container Systems Will Be Used By The Danish Defence For Transport And Storage Of Goods Or For Donation Purposes. The Container Systems In This Category Are Used Transport Containers With A Random Color And Bic Code. Can Upon Dalo’s Request Be Upgraded With Optional Price List Items. Delivery Time: Short. For Immediate Transportation Demands And Fast Deployment. Category 2 – Standard Transport Container Systems - New. These Container Systems Will Be Used By The Danish Defence For Transport And Storage Of Goods. The Container Systems In This Section Are New Transport Containers With A Prespecified Color And Marked With Dalo Bic Code. Can Upon Dalo’s Request Be Upgraded With Optional Price List Items. Delivery Time: Short To Medium. For Immediate Transportation Demands And Fast Deployment. Category 3 - Special Transport Container Systems - New. These Container Systems Will Be Used Of The Danish Defence For Transport And Storage Of Goods That Need To Be Lashed In A Certain Way And Therefore Requires A Flexible Anchoring/lashing System That Is Beyond What A Standard Transport Container Can Accommodate. The Container Systems In This Section Are New Transport Containers Modified With Extra Anchoring Points, A Prespecified Color And Marked With Dalo Bic Code. Can Upon Dalo’s Request Be Upgraded With Optional Price List Items. Delivery Time: Medium To Long. Category 4 - Standard Prefab Systems. These Prefab Systems Are For Example Used For Office And Administration, Living, Living Space, Storage, Depot, Dining Rooms And Infirmary Facilities. The Prefab Systems Will Be In Different Types And In It Must Help To Provide Satisfactory Living Conditions And Support Operational, Logistical And Manage-rial Activities Over A Longer Period Of Time. The Prefab Should Have The Similar Size To An 20´iso Container With The Possible Of Connecting More Than One Together. It Should Further Be Possible To Assemble The Prefab On Site, Meaning That It Is Possible To Stack And Transport Without Exceeding The Height Of An 20´ Iso Container. Category 5 - Special Prefab Systems - Dema (danish Emergency Management Agency) Will Use This Prefab For Office, Accommodations, Kitchen, Morgue, Medical Facility Etc. Dema Is Using The Prefab Primary For Fast, Easy And Flexible Solutions For Operations In Distressed Areas Around The World. The Prefab Is Based On Light-weight Materials And Assembled With Simple Tools, Meaning That You Can Set It Up With Only A Small Group Of People In A Couple Of Hours And With No Need Of Heavy Lifting Equipment. Category 6 - Service, Repair/maintenance Of New And Old Containers - Existing Dalo Container Fleet This Category Will Be Used For Service, Repair And Maintenance Of New And Old Containers In The Fleet Of Container Systems To Secure That Operational/functional, Meets The Statutory Demands And Are Safe To Use. This Might Include: • Repair And Maintenance Services • Man Hours: Design, Documentation, Manufacturing, Service And Maintenance • Electrical Services • Heating-system Services • Plumbing Services • Ventilation Services • Csc Recertification • Spareparts Category 7 – New Container Systems Design Or Modification For Existing Container Fleet This Category Will Be Used For Complete New Design, Upgrade Or Modification Of New And Old Containers. • Man Hours: Design, Documentation, Manufacturing, Service And Maintenance • Components And Semi-finished Product • Installation Services (except Software) • Construction, Engineering And Inspection Services Category 8 - Accessory This Category Includes All That Is Not System Specific To The Cs-prefab. It Can Be Third Party Product That Is Not Cover By The Above 7 Categories. Examples Of Accessories To The Cs-prefab Are: Furniture (incl. Office Furniture), Furnishings, Domestic Appliances (excl. Lighting). Electrical Components And Installations Emergency And Security Equipment Surface Treatment, Paint And Colour Construction Materials And Associated Items Site Preparation Work Multi-functional Buildings Construction Work Transport Services (excl. Waste Transport) Education And Training Services

Details: Advertisement For Bids - Notice To Contractors Notice Is Hereby Given That The Warren County Board Of Supervisors Will Receive Sealed Bids From Qualified Bidders For The Following Project: Warren County Term Bids – Road Repairs And Construction Services Include The Following Schedules: A. Asphalt Base Repair And Resurfacing (asp) B. Pavement Marking (paint And Thermoplastic) (pm) C. Erosion Control (ec) D. Construction Services (cs) The Above General Outline Of Work Does Not In Any Way Limit The Responsibility Of The Contractor To Perform All Work And Furnish All Parts, Labor, Equipment, And Materials Required By The Specifications Referred To Therein. Sealed Bids Will Be Received At The Warren County Purchasing Department, 913 Jackson St, Vicksburg Ms 39183 Until 10:00 A.m. Local Time On Wednesday, December 4, 2024, And Shortly Thereafter Publicly Opened, Read Aloud And Recorded. Electronic Bids Can Be Submitted At Www.centralbidding.com. Official Bid Documents Can Be Downloaded From Central Bidding. Interested Contractors Can Register As A Vendor At Www.centralbidding.com. Electronic Bids Are Due At The Same Time And Date As Sealed Bids. For Any Questions Relating To The Electronic Bidding Process, Please Call Central Bidding At 225-810-4814. The Purpose Of This Bid Solicitation Is To Establish Term Contracts With Multiple Contractors (up To 3 Contractors Per Bid Schedule) That Can Be Used For Various Types Of Small Repair Projects For Warren County Roads And Roadside Development, On An As-needed Basis, By Issued Individual Work Orders. The Owner Or Their Representative Shall Solicit Quotes For Each Future Work Order From Each Of The Contractors Who Submitted And Were Awarded Successful Responsive Bids On This Term Bid Contract. In Selecting A Particular Awarded Contractor For A Particular Work Order The Owner Or Their Representative Shall Consider Pricing, Quality Of Performance, Responsiveness, And Availability Of The Awarded Contractors To Perform The Specific Scopes Of Work Outlined When Issuing Work Orders. Quantities Referenced In The Specifications Are For Comparison Purposes Only And Do Not Reflect Any Particular Work Order/project. Quantities And Contract Time For Each Work Order/project Shall Be Determined By The Engineer. The Term Of This Bid Shall Be For One (1) Calendar Year From The Date Of The Award By The Board Of Supervisors. Contractors Are Encouraged To Attend A Pre-bid Conference Scheduled For Wednesday, November 13, 2024, At 10:00 A.m. In The Neel-shaffer Vicksburg Office Conference Room At 1100 Cherry Street, Vicksburg Ms 39183. Bidders Must Be Qualified Under Mississippi State Law And Possess A Certificate Of Responsibility Issued By The Mississippi State Board Of Public Contractors In A Classification Such As (a) Highway, Street And Bridge Construction, (b) Municipal And Public Works Construction, (c) Excavation, Grading & Drainage Or Another Closely Related Classification. Some Projects Under This Term Bid Are Expected To Exceed $50,000, Therefore The Certificate Of Responsibility Number Shall Be Written On The Outside Of The Sealed Bid Envelope. For Electronic Bids, The Cor Information Must Be Submitted As The First Page Of The Pdf Attachment With The Electronic Bid Submittal. Mississippi Has A Reciprocal Preference Law And Mississippi Code 31-3-21 Requires That A Copy Of Any Non-resident Bidder’s Current State Law Pertaining To Its Treatment Of Non-resident Contractors Be Submitted At The Time The Bid Is Submitted, Or That Bid Shall Not Be Considered Further. Any Preference An Out Of State Bidder Would Have Had In His Home State Shall Be Applied In A Reciprocal Manner. All Bids Shall Be In Compliance With And Subject To The Guidelines And Requirements Of Mississippi Code Of 1972 As Annotated And Amended. Any Repair Projects Awarded Under This Term Bid Shall Be In Accordance With The Latest Edition Of The Mississippi Standard Specifications For Road And Bridge Construction. Each Bidder Must Deposit With His Bid A Bid Bond Or Certified Check In An Amount Equal To $1,000.00 Payable To Warren County As Bid Security. The Successful Bidder Shall Furnish A Proof Of Insurance, Along With Performance And Payment Bonds In The Amount Of 100% Of The Contract Amount Awarded For Projects In Excess Of $25,000. Attorneys-in-fact Who Sign Bid Bonds Or Payment Bonds And Performance Bonds Must File With Each Bond A Certified And Effective Dated Copy Of Their Power Of Attorney. Bidders Shall Also Submit A Current Financial Statement If Requested By Warren County Board Of Supervisors. Neel-schaffer, Inc. Is The Engineer For This Project. Specifications And Bid Documents Are On File And Open To Public Inspection At The Office Of The Warren County Purchasing Department, 913 Jackson Street, Vicksburg, Ms 39183. Contractors May Request Bid Documents By Visiting Www.centralbidding.com And Following The Site Instructions For Registration And Download. Bid Documents May Also Be Picked Up At No Charge At The Neel-schaffer Office Located At 1100 Cherry Street, Vicksburg, Ms 39183. Questions May Be Addressed To Brian, Robbins, P.e., Project Manager Via Brian.robbins@neel-schaffer.com. The Warren County Board Of Supervisors Reserves The Right To Determine Responsible Bidders, Responsive Bids, The Lowest And Best Bid, Reject Any And All Bids, Award To Multiple Bidders Believed Most Advantageous To Warren County, And To Waive Any Informalities In The Bids And Bidding Process. Published Pursuant To Board Order Dated The 16th Day Of September, 2024. The Warren County Board Of Supervisors By: Victoria Bell, Purchasing Agent Publication Dates: October 30, 2024 November 6, 2024

Details: Description Item No. Quantity Unit Of Issue Item Description 1- 42 Unit 18hp Motorboat Engine, Diesel 2- 3 Pcs. 18-footer Wooden Banca (w/ Dole Logo) W/ Paint Abd Outrigger, 23in (h), 18ft (l), W/ 7.5hp Motorboat Engine. 3 Pcs. Propeller, 5in. Bladed, Stainless 3 Pcs. Round Bar, 7ft, 5/8 Stainless 3- 3 Sacks Hog Pre Starter 3 Sacks Hog Premium Grower (1) 3 Sacks Hog Premium Lactating 3 Sacks Hmog Expert Starter 3 Sacks Hog Super Biik 3 Sacks Hog Bonanza Grower 3 Sacks Chicken Entegra (2000) 3 Sacks Chicken Entegra (3000) 4- 120 Kl. Fishnet Sinker (tengga) 36 Kl. Fishnet Floater ( Guma) 120 Roll Nylon #08 120 Roll Nylon #10 6 Pcs. Diving Goggles, Stainless Frame 12 Pcs. Styro Foam, Lxwxh (57x38x42) 6 Pcs. Diving Flashlight (waterproof) 5- 35 Bundle Fishnet #7 (100m/bundle), Color Green 35 Bundle Fishnet #8 (100m/bundle), Color Green 35 Bundle Fishnet #12 (100m/bundle), Color Green 35 Bundle Coralon Twine #2 35 Kls. Nylon #30 35 Kls. Nylon #70 35 Kls. Nylon #100 6- 63 Bundle Fishnet #6 (100m/bundle) 63 Bundle Fishnet #7 (100m/roll) 140 Kls. Fishner Sinker (tingga) 70 Kls. Fishnet Floater ( Guma) 35 Rolls Nylon #8 35 Kls. Nylon #100 7 Pcs. Diving Flashlight (waterproof) 7- 4 Pc. Industrial Grade Rubberrized Plastic Basin (banyera For Fish Vendor) 42l, Dimension (lxwxh) 1 Pc. Big Umbrella (colored) 3 Pc. Cooler (45l) 1 Pc. Weighning Scale ( Digital) 1 Pc. Foldable Wood Table (4 Seater) 2 Pc. Mono Block Chair; Classic Chair; Color: Beige 20 Pcs. Plastic Bag( Small) 20 Pack Plastic Bag( Large) 1 Pc. Chopping Board 15x10 In X0.5 In 1 Set Knife Black, 6pcs/set 8- 14 Pc. Chestfreezer Small( 3.5 Cubic Feet/ Dual Function Chiller And Freezer/ Inverter 70 Pack Hotdog (1kl) 42 Pack Tocino, 250g 42 Pack Tapa 250g 9- 2 Pc. Foldable Wood Table (4 Seater) 2 Set Single Burger Griller With Fryer, Gas Type, With Food Tong And Egg Molder 2 Pcs. Food Glass Display ( Skaparate), Dimension ( 14 In X 17in X36in) Lxwxh, 3 Layer,( Pull Screen Door) 2 Pcs. Apron With Print Dole & Dilp Logo 4 Pc. Squeeze Condimentsbottle, 32oz 2 Pack Burger Wrapper, 100pcs/pack 2 Pack Hotdog Wrapper,100pcs/pack 2 Gal Cooking Oil 10 Packs Burger Ban 20 Packs Burger Patty 10 Packs Hotdog Ban 16 Kls. Hotdog Jumbo 4 Kl. French Fries 2 Lit. Banana Catsup 2 Lit. Mayonnaise 10- 32 Pcs. Mono Block Chairs 10 Set Wooden Foldable Table, 4 Seaters Terms And Conditions: 1. Expiration Date Should Be Cy 2025 Or Beyond. 2. Items Should Deliver Free From Dents And Holes. Should Be Replaced Within Five (5) Days Upon Notice Of Defect. 3. Items Should Be Delivered In A Good Condition To Lgu Hernani,brgy.cancilides, At No Extra Cost Thereto, At The Schedule Prescribe By The Procuring Entity Or At Least Forty (40) Calendar Days Upon Receipt Of Notice To Proceed. 4. Price Validity Shall Be For The Period Until The Payment Of The Good. 5. Price Quotation Should Be Made With Extra Care Taking Into Account The Specifications Ad Unit Of Quantity To Avoid Errors. Prospective Suppliers Bind Himself To All Conditions Stipulated Hereto. 6. Cash On Delivery Is Not Allowed. 7. Price Quoted Shall Be Inclusive Taxes, Delivery Charges And Other Charges Prescribe By The Law. 8. Withholding Taxes As Per Bir Rules And Regulations Will Be Deducted By The Lgu From The Contract Price (bir Revenue Regulations No. 11-2018, Dated January 31,2018.ol9, 9. Payment Shall Be Done After Delivery Of Receipts For Billing Subject To The Usual Inspection And Acceptance Requirements. 10. For Processed Food And Fresh Meats, These Should Be Free From Contamination As Evidenced By A Certificate Of Meat Inspection To Be Presented By The Winning Supplier At The Day Delivery. 11. Expiration Date Of Frozen/processed Meats/ Foods Should Not Be Earlier Than March 2025.

Details: Title: Dynamic Purchasing System For Transport Container Systems, Prefab System, Design, Service And Repair/maintenance description: Dalo Is Looking To Set Up A Dynamic Purchasing System (hereafter Dps) For Container Systems, Prefabs And Service (hereafter Cs-prefab). The Dps Is A Purchasing Method, Where An Economic Operator Can Apply For Prequalification In The Dps. The Dps Is A Purchasing Method, Where An Economic Operator Can Apply For Prequalification In The Dps. Approved Economic Operators Will Be Participants In The Dps. When An Economic Operator Has Been Prequalified As Participant In The Dps, The Economic Operator (now Participant In The Dps) Can Submit Offers On Published Tenders In The Dps. There Is No Limit On The Number Of Economic Operators That May Join The Dps. New Economic Operators Can Also Apply To Join The Dps At Any Point During The Lifetime Of The Dps. Economic Operators Should Note However, That Admission Into The Dps Is Not A Guarantee Of Being Awarded Any Contracts, And There Is Also No Guarantee Of Volume Or Value Of Tenders In The Dps. The Dps Is Divided Into Eight Categories Where It Shall Be Possible To Buy Items And Accessories. Common Characteristics For The Container Systems Is That They Are All Corresponding To Iso Container Standards And Have A Variety Of Sizes From 10ft To 40ft With 20ft Being The Standard Size. They Are Intended For Common Iso Handling Tools And Are To Be Transported Via Road, Sea, Air And Rail - Both Nationally And Internationally With All Kind Of Goods. All Of The Container Systems In This Dps Is Ex-pected To Be Or To Be Based On Standard Commercial Products (cots). Category 1 – Standard Transport Container Systems - Used. These Container Systems Will Be Used By The Danish Defence For Transport And Storage Of Goods Or For Donation Purposes. The Container Systems In This Category Are Used Transport Containers With A Random Color And Bic Code. Can Upon Dalo’s Request Be Upgraded With Optional Price List Items. Delivery Time: Short. For Immediate Transportation Demands And Fast Deployment. Category 2 – Standard Transport Container Systems - New. These Container Systems Will Be Used By The Danish Defence For Transport And Storage Of Goods. The Container Systems In This Section Are New Transport Containers With A Prespecified Color And Marked With Dalo Bic Code. Can Upon Dalo’s Request Be Upgraded With Optional Price List Items. Delivery Time: Short To Medium. For Immediate Transportation Demands And Fast Deployment. Category 3 - Special Transport Container Systems - New. These Container Systems Will Be Used Of The Danish Defence For Transport And Storage Of Goods That Need To Be Lashed In A Certain Way And Therefore Requires A Flexible Anchoring/lashing System That Is Beyond What A Standard Transport Container Can Accommodate. The Container Systems In This Section Are New Transport Containers Modified With Extra Anchoring Points, A Prespecified Color And Marked With Dalo Bic Code. Can Upon Dalo’s Request Be Upgraded With Optional Price List Items. Delivery Time: Medium To Long. Category 4 - Standard Prefab Systems. These Prefab Systems Are For Example Used For Office And Administration, Living, Living Space, Storage, Depot, Dining Rooms And Infirmary Facilities. The Prefab Systems Will Be In Different Types And In It Must Help To Provide Satisfactory Living Conditions And Support Operational, Logistical And Manage-rial Activities Over A Longer Period Of Time. The Prefab Should Have The Similar Size To An 20´iso Container With The Possible Of Connecting More Than One Together. It Should Further Be Possible To Assemble The Prefab On Site, Meaning That It Is Possible To Stack And Transport Without Exceeding The Height Of An 20´ Iso Container. Category 5 - Special Prefab Systems - Dema (danish Emergency Management Agency) Will Use This Prefab For Office, Accommodations, Kitchen, Morgue, Medical Facility Etc. Dema Is Using The Prefab Primary For Fast, Easy And Flexible Solutions For Operations In Distressed Areas Around The World. The Prefab Is Based On Light-weight Materials And Assembled With Simple Tools, Meaning That You Can Set It Up With Only A Small Group Of People In A Couple Of Hours And With No Need Of Heavy Lifting Equipment. Category 6 - Service, Repair/maintenance Of New And Old Containers - Existing Dalo Container Fleet This Category Will Be Used For Service, Repair And Maintenance Of New And Old Containers In The Fleet Of Container Systems To Secure That Operational/functional, Meets The Statutory Demands And Are Safe To Use. This Might Include: • Repair And Maintenance Services • Man Hours: Design, Documentation, Manufacturing, Service And Maintenance • Electrical Services • Heating-system Services • Plumbing Services • Ventilation Services • Csc Recertification • Spareparts Category 7 – New Container Systems Design Or Modification For Existing Container Fleet This Category Will Be Used For Complete New Design, Upgrade Or Modification Of New And Old Containers. • Man Hours: Design, Documentation, Manufacturing, Service And Maintenance • Components And Semi-finished Product • Installation Services (except Software) • Construction, Engineering And Inspection Services Category 8 - Accessory This Category Includes All That Is Not System Specific To The Cs-prefab. It Can Be Third Party Product That Is Not Cover By The Above 7 Categories. Examples Of Accessories To The Cs-prefab Are: Furniture (incl. Office Furniture), Furnishings, Domestic Appliances (excl. Lighting). Electrical Components And Installations Emergency And Security Equipment Surface Treatment, Paint And Colour Construction Materials And Associated Items Site Preparation Work Multi-functional Buildings Construction Work Transport Services (excl. Waste Transport) Education And Training Services

Details: Description Invitation To Bid 1. The Bukidnon Second District Engineering Office, Through The Fy 2025 Nep (national Expenditure Program) Intends To Apply The Sum Of Four Million Nine Hundred Fifty Thousand Pesos Only Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Contract Id No. 25kb0015 – Construction (completion) Of Multi-purpose Building (covered Court), Barangay North Poblacion, Maramag, Bukidnon. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Bukidnon Second District Engineering Office Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Construction (completion) Of Multi-purpose Building (covered Court), Barangay North Poblacion, Maramag, Bukidnon Contract Id # : 25kb0015 Locations : Barangay North Poblacion, Maramag, Bukidnon Scope Of Works : Completion Of Multi-purpose Building (covered Court) Inclusive Of Earthworks, Reinforced Concrete, Chb Walls, Fascia Board With Fascia Frame, Pre-painted Flashing, Gutter And Rib Type Roofing, Concrete, Wood And Steel Painting For Four (4) Offices And Toilet. Extension Of Slab On Fill Of Covered Court. Approved Budget For The Contract : Php 4,950,000.00 Contract Duration : 210 Calendar Days 2. Prospective Bidders Should Be Registered With And Classified By The Philippine Accreditation Board (pcab) With Pcab License Category Of C & D (small B) For General Building/gb-1 (building Of Industrial Plant). The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 3. Bidding Will Be Conducted Through An Open Competitive Bidding Procedure Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 4. Interested Bidders May Obtain Further Information From The Bukidnon Second District Engineering Office-bac Secretariat And Inspect The Bidding Documents At Pinamaloy, Don Carlos, Bukidnon During Weekdays From 8:00 A.m. To 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On October 08, 2024 To October 28, 2024, Until 8:30 Am From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 5,000.00. 6. The Bukidnon Second District Engineering Office Will Hold A Pre-bid Conference On October 15, 2024 At 10:00 Am Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_bukidnon2 Https://dpwhgovph.sharepoint.com/sites/bids/shared%20documents/forms/allitems.aspx?id=%2fsites%2fbids%2fshared%20documents%2fregion%2010%2fbukidnon%202&viewid=d1bf3c8e%2d45ca%2d40b1%2dbf89%2d9c3f4e8bc98b For Electronic Submission On Or Before October 28, 2024 At 9:30 Am. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. 9. Bid Opening Shall Be On October 28, 2024 At 10:00am. Bids Will Be Opened In The Presence Of The Bidder’s Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 10. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The (bid Data Sheet) Bds, Itb Clause 18. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 11. The Bukidnon Second District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Norma A. Ogabang Head, Procurement Unit 09177901575 Email Ad> Procurementunit2017@gmail.com 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: Philgeps Websites And Dpwh Website For Online Bid Submission: Dpwh Website (october 07, 2024) Juvy F. Paulican Bac Chairperson 09661495577 Email Ad> Paulican.juvy@dpwh.gov.ph

Details: Description Invitation To Bid For The Supply, Delivery, Installation And Testing/commissioning Of Rice Mill Under Rice Program Fy 2024 (savings) 1. The Department Of Agriculture Regional Field Office Iva Through The Rice Program Intends To Apply The Sum Of One Million Five Hundred Thousand Pesos (ᵽ 1,500,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Supply, Delivery, Installation And Testing/commissioning Of Rice Mill Under Rice Program Fy 2024 (savings) With Project Identification No.: Itb-2024-10-242. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Department Of Agriculture Regional Field Office Iva Now Invites Bids For The Above Procurement Project. Supply, Delivery, Installation And Testing/commissioning Of Rice Mill I. Design And Performance Type: Stationary, Single Pass Prime Mover: Minimum 14.9kw (20hp) Diesel Engine, Water-cooled With Electric Starter, Battery And Battery Charger And Able To Provide Sufficient, Continuous And Peak Power Requirement Of The Milling System Specific Fuel Consumption: Maximum @350 G/kw-h At 80% Rated Power Hulling System: Rubber Roll Hulling Efficiency: 75%, Minimum Milling Recovery Index: 0.90, Minimum Percent Head Rice Index: 0.85, Minimum Input Capacity: 500 Kg/hr, Minimum Milling Degree: Well-milled Number Of Paddy Per Kg Of Milled Rice: 15 Components: 1. Paddy Intake Feed Hopper 2. Paddy Pre-cleaner System -oscillating Type -minimum Single-layer Screen -with Magnetic Separator To Remove Ferrous Particle From The Product 3. Hulling Unit -type: Rubber Roll (fixed And Adjustable) -dimensions (fixed And Adjustable Rubber Roll), W X D X T, Mm: 100 X 222 X 19, Minimum 4. De-stoner -oscillating Type -mounted On Steel Base Structure -separates Stones And Other Heavy Impurities 5. Whitener -abrasive Type Or Friction Type 6. Rice Sifter With Aspirator -oscillating Tray-type Or Drum-type -made Of Perforated Metal Steel 7. Rice Hull Bin -capacity: Minimum 15cu. Meter -materials: Gi Sheet, 1.2mm Thickness, Minimum -angle Bar Frame For Steel Trusses, Main Frame And Members: 50mm X 50mm X 6mm, Minimum -with Reinforced Concrete Foundation That Can Withstand The Maximum Capacity Of The Bin -corrugated G.i Roofing: 0.4mm, Minimum -piping Connections From The Huller To The Price Hull Bin (material Made Of Stainless Steel Or Primer Painted And Powder Coated B.i Sheet Or G.i Sheet 8. With Conveyors And Elevators -bucket Type For The Transfer Of Grains 9. Mounting Frame -steel Channel (reinforced By Steel Angular Bars (50mm X 50mm X 6mm), Minimum -with Foundation Brackets For Concrete Floor Installation Accessories: 1. With Portable Moisture Meter (multi-grain And Capacitance Type) •moisture Range: 12-15% Or Wider •accuracy: ±0.5% Or Better •lcd/led Display •battery Operated •with Operation Manual Written In English 2. Handheld Or Portable Bag/sack Closer/sewer 3. One (1) Set Of Spare Rubber Roll 4. One (1) Set Of Spare Whitener Screen 5. One (1) Spare Of Steel-fluted Roller 6. One (1) Unit Weighing Scale, 1000 Kg Capacity, 0.5kg Graduation 7. With Reflectorized "da Calabarzon" Logo (254mm X 508mm) At The Prescribed Part Of The Rice Mill. 8. With Manufacturer's Name Plate Indicating The Serial Number Of The Machine And Engine. Ii. Safety Noise Level Should Be Maximum Of 92 Db (a) For 6-hours Continuous Operation. If Exceeded, Earmuff Must Be Provided For Each Unit. Iii. Maintenance Provided With A Set Of Manufacturers Standard Heavy-duty Tools: Made Of Tempered Steel And Chrome Vanadium: •one Set Socket Wrench (no. 8 To 20, No. 22,23,24,27,30,32, Minimum) •one Set Combination Wrench (open And Box, 10pcs - Size Appropriate To The Drying System) •screw Driver, Philips And Flat Head, 300mm Minimum •grease Gun, 250mm Cylinder Length, Minimum •mechanical Pliers, 200mm, Minimum •adjustable Wrench: 300mm, Minimum •heavy Duty Toolbox And Roll Up Tools Holder (can Accommodate All Tools) Iv. List Of Applicable Paes Pabes For Rice Mill Pabes For Rubber Roll Paes For Guidelines On After Sales Service Paes For Operator's Manual - Content And Presentation V. Other Requirements 1. With Original Equipment Manufacturers (oem) Operators Manual Of The Rice Mill And Engine Written In English Or Filipino 2. With One Year Warranty For Major Parts And Service From The Date Of Acceptance Of The Beneficiary And At Least Two (2) Follow-up Visits To The Recipient Within The Warranty Period (free Labor During The First Preventive Maintenance Service Within The Warranty Period) 3. Supplier Shall Provide Warranty And After-sales Service Conforming To Pns/pabes 192:2016 (guidelines On After-sales Service) 4. With Valid And Passing Test Report (trailed Or Stationary Is Acceptable) For The Rice Mill Issued By Amtec Or Other Accredited Testing Center. Separate Amtec Test Report For The Prime Mover/engine. 5. Certification That The Bidder Will Provide The Palay Samples, Labor, Fuel And Other Necessary Materials During The Conduct Of Acceptance Testing. 6. The Rice Milling System And Mounting Frames Should Be Painted Finish, With Rust-proofing Primer And Final Paint Color 7. Certification That The Bidder/supplier Will Conduct Training On The Proper Handling, Operation And Maintenance Of The Unit For At Least Two (2) Operators Of The Farmers Association (fa) 8. With Certification Of Very Satisfactory Performance Of The Supplier From At Least Three (3) Clients, With Full Address And Telephone Numbers, Within The Last Two (2) Years. 9. With National Agricultural And Fisheries Machinery Assemblers, Manufacturers, Importers, Distributors And Dealers, Accreditation And Classification (namdac) Certificate Of Accreditation 10. With Permit To Operate And Certificate Of Conformity Issued By Da-bafe As Per Memorandum Circular No. 30 Series Of 2020 Vi. Terms Of Payment 85% Upon Complete Installation And 15% Upon Acceptance Testing/commissioning (submission Of Acceptance Testing Report) Vii. Contract Duration And Delivery Place Period Of Delivery: Sixty (60) Calendar Days Upon Receipt Of Notice To Proceed Place Of Delivery: • Paete, Laguna Delivery Of The Goods Is Required Within Sixty (60) Calendar Days Upon Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Department Of Agriculture Regional Field Office Iva, 8:00 Am To 3:00 Pm Mondays Thru Fridays Except On The Scheduled Time Of Pre-bid Conference And Inspect The Bidding Documents At The Address Given Below: Department Of Agriculture Regional Field Office Iv-a Bac Secretariat Office / Arturo R. Tanco Training Hall Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On The Address Given Above Mondays Thru Fridays 8:00 Am To 3:00 Pm Except On The Scheduled Time Of Pre-bid And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (ᵽ5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, Or Through Electronic Means. 6. The Department Of Agriculture Regional Field Office Iva Will Hold A Pre-bid Conference On November 13, 2024 10:00 Am (bidders Must Be Present At The Venue One (1) Hour Before The Scheduled Bidding Activity. Time Schedule Is Subject To Adjustment Depending On The Flow Of Bidding Activity. Furthermore, Bidders Are Required To Provide Their Company Id And Another Valid Id, And Authorization Letter From The Company They Represent.) At Department Of Agriculture Regional Field Office Iv-a Stiarc Conference Room, Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, Department Of Agriculture Regional Field Office Iv-a Stiarc Conference Room, Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas On Or Before November 25, 2024 9:00 Am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On November 25, 2024 10:00 Am (bidders Must Be Present At The Venue One (1) Hour Before The Scheduled Bidding Activity. Time Schedule Is Subject To Adjustment Depending On The Flow Of Bidding Activity. Furthermore, Bidders Are Required To Provide Their Company Id And Another Valid Id, And Authorization Letter From The Company They Represent.) At Department Of Agriculture Regional Field Office Iv-a Stiarc Conference Room, Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Department Of Agriculture Regional Field Office Iv-a Does Not Condone Any Form Of Solicitation On Any Prospective Winning And Losing Bidders By Any Of Our Staff/employees Or Any Other Party. Any Sort Of This Kind Shall Be Reported Immediately To The Office Of The Secretary Or The National Bureau Of Investigation (nbi) For Entrapment And Proper Investigation 11. The Department Of Agriculture Regional Field Office Iva Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Engr. Ernie N. Rabusa Chairperson, Bids And Awards Committee Secretariat Department Of Agriculture Regional Field Office Iv-a Lipa Agricultural Research And Experiment Station (lares), Brgy. Marawoy, Lipa City, Batangas Contact No.: (02) 8273-24-74 (local 4487) Email Address: Bacsecretariat@calabarzon.da.gov.ph 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: [https://notices.philgeps.gov.ph; Https://calabarzon.da.gov.ph/invitation-to-bid-page/] Date Of Issue: November 5, 2024 _____________________________________ (sgd) Engr. Romelo F. Reyes Chairperson, Bids And Awards Committee

Details: Description Invitation To Bid 1. The Bukidnon Second District Engineering Office, Through The Fy 2025 Nep (national Expenditure Program) Intends To Apply The Sum Of Four Million Nine Hundred Fifty Thousand Pesos Only Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Contract Id No. 25kb0014 – Construction Of Multi-purpose Building (barangay Hall), Barangay Panadtalan, Maramag, Bukidnon. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Bukidnon Second District Engineering Office Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Construction Of Multi-purpose Building (barangay Hall), Barangay Panadtalan, Maramag, Bukidnon Contract Id # : 25kb0014 Locations : Barangay Panadtalan, Maramag, Bukidnon Scope Of Works : Construction Of Two-storey Barangay Hall – The Work Includes; Earthworks, Plain And Reinforced Concrete Works From Ground Up To Second Floor, Installation Of Doors And Windows, 100mm Chb Walls (from Ground Floor To Second Floor), Ramp With Railings, Provision Of Railings In Stairs And Balcony, Painting Works For Masonry (exterior Only), Painting Works For Steel, Installation Of Ceiling, Installation Of Roof With Roofing Accessories, Plumbing Works And Electrical Works. Approved Budget For The Contract : Php 4,950,000.00 Contract Duration : 210 Calendar Days 2. Prospective Bidders Should Be Registered With And Classified By The Philippine Accreditation Board (pcab) With Pcab License Category Of C & D (small B) For General Building/gb-1 (building Of Industrial Plant). The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 3. Bidding Will Be Conducted Through An Open Competitive Bidding Procedure Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 4. Interested Bidders May Obtain Further Information From The Bukidnon Second District Engineering Office-bac Secretariat And Inspect The Bidding Documents At Pinamaloy, Don Carlos, Bukidnon During Weekdays From 8:00 A.m. To 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On October 08, 2024 To October 28, 2024, Until 8:30 Am From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 5,000.00. 6. The Bukidnon Second District Engineering Office Will Hold A Pre-bid Conference On October 15, 2024 At 10:00 Am Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_bukidnon2 Https://dpwhgovph.sharepoint.com/sites/bids/shared%20documents/forms/allitems.aspx?id=%2fsites%2fbids%2fshared%20documents%2fregion%2010%2fbukidnon%202&viewid=d1bf3c8e%2d45ca%2d40b1%2dbf89%2d9c3f4e8bc98b For Electronic Submission On Or Before October 28, 2024 At 9:30 Am. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. 9. Bid Opening Shall Be On October 28, 2024 At 10:00am. Bids Will Be Opened In The Presence Of The Bidder’s Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 10. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The (bid Data Sheet) Bds, Itb Clause 18. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 11. The Bukidnon Second District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Norma A. Ogabang Head, Procurement Unit 09177901575 Email Ad> Procurementunit2017@gmail.com 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: Philgeps Websites And Dpwh Website For Online Bid Submission: Dpwh Website (october 07, 2024) Juvy F. Paulican Bac Chairperson 09661495577 Email Ad> Paulican.juvy@dpwh.gov.ph

Details: Description Invitation To Bid For 25ei0092 - Construction Of Multi-purpose Building At Barangay Malo, Phase Ii, Bansud, Oriental Mindoro 1. The Dpwh - Southern Mindoro District Engineering Office, Through Nep 2025 Intends To Apply The Sum Of Php 2,970,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Construction Of Multi-purpose Building At Barangay Malo, Phase Ii, Bansud, Oriental Mindoro/25ei0092. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Dpwh - Southern Mindoro District Engineering Office Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Construction Of Multi-purpose Building At Barangay Malo, Phase Ii, Bansud, Oriental Mindoro Contract Id No. : 25ei0092 Locations : Bansud, Oriental Mindoro Scope Of Works : Completion Of Covered Court, Featuring A 3-tier Bleacher System At The Rear Elevation With A Total Lenght Of 30.00 Meters, And The Addition Of A Bay Extending 5.10 Meters. Scope Of Work Includes Comprehensive Earthworks, Civil Works, Masonry Works, Surface Preparation And Painting Of Newly Installed And Existing Beams, Columns, And Bleachers, Steel Painting Of Rafters And Purlins For The Bleacher Structure, As Well As Complete Roofing Installation. Approved Budget For The Contract : Php 2,970,000 Contract Duration : 120 Calendar Days 3. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of C & D, B, A, Aa, Aaa For General Engineering. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 5. Interested Bidders May Obtain Further Information From The Dpwh - Southern Mindoro District Engineering Office And Inspect The Bidding Documents At Dangay, Roxas, Oriental Mindoro During Weekdays From 8:00 A.m. – 5:00 P.m. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 14, 2024 - December 05, 2024 Until 10:00 A.m. From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 3,000.00. 7. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. The Dpwh - Southern Mindoro District Engineering Office Will Hold A Pre-bid Conference On November 22, 2024 At 10:00 A.m. At Dpwh - Southern Mindoro District Engineering Office, Procurement Unit, Dangay, Roxas, Oriental Mindoro Which Shall Be Open To Prospective Bidders. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_southernmindoro@dpwh.gov.ph For Electronic Submission On Or Before December 05, 2024 Until 10:00 A.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 11. Bid Opening Shall Be On December 05, 2024 @ 10:30 A.m. At Dpwh - Southern Mindoro District Engineering Office, Procurement Unit, Dangay, Roxas, Oriental Mindoro. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 12. The Dpwh - Southern Mindoro District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: Engr. Aleli Olly U. Manalaysay Head, Procurement Unit, E-iii Tel. No. 043 – 289 - 3102 Rubico-fetalsana.marinelle@dpwh.gov.ph Emmanuel A. Manalaysay Bac Chairperson Assistant District Engineer Tel. No. 043 – 289 - 3102 Rubico-fetalsana.marinelle@dpwh.gov.ph Approved: Emmanuel A. Manalaysay Bac Chairperson

Details: Description Invitation To Bid 1. The Bukidnon Second District Engineering Office, Through The Fy 2025 Nep (national Expenditure Program) Intends To Apply The Sum Of Four Million Nine Hundred Fifty Thousand Pesos Only Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Contract Id No. 25kb0010 – Construction (completion) Of Multi-purpose Building (administration Building), Barangay Lumintao, Quezon, Bukidnon. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Bukidnon Second District Engineering Office Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Construction (completion) Of Multi-purpose Building (administration Building), Barangay Lumintao, Quezon, Bukidnon Contract Id # : 25kb0010 Locations : Barangay Lumintao, Quezon, Bukidnon Scope Of Works : Completion Of Multi-purpose Building (administration Building) Inclusive Of Installation Of Tiles For Interior Floor Area, Toilet And Toilet Walls. Installation Of Ceiling For Interior With Painting. Painting Works For Steel, Masonry And Wood. Installation Of Steel Railings For Stairs And Aluminum Cladding For Front Porch. Complete Plumbing Fixtures. Complete Electrical And Lighting Works. Approved Budget For The Contract : Php 4,950,000.00 Contract Duration : 210 Calendar Days 2. Prospective Bidders Should Be Registered With And Classified By The Philippine Accreditation Board (pcab) With Pcab License Category Of C & D (small B) For General Building/gb-1 (building Of Industrial Plant). The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 3. Bidding Will Be Conducted Through An Open Competitive Bidding Procedure Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 4. Interested Bidders May Obtain Further Information From The Bukidnon Second District Engineering Office-bac Secretariat And Inspect The Bidding Documents At Pinamaloy, Don Carlos, Bukidnon During Weekdays From 8:00 A.m. To 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On September 24, 2024 To October 14, 2024, Until 8:30 Am From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 5,000.00. 6. The Bukidnon Second District Engineering Office Will Hold A Pre-bid Conference On October 01, 2024 At 10:00 Am Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_bukidnon2 Https://dpwhgovph.sharepoint.com/sites/bids/shared%20documents/forms/allitems.aspx?id=%2fsites%2fbids%2fshared%20documents%2fregion%2010%2fbukidnon%202&viewid=d1bf3c8e%2d45ca%2d40b1%2dbf89%2d9c3f4e8bc98b For Electronic Submission On Or Before October 14, 2024 At 9:30 Am. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. 9. Bid Opening Shall Be On October 14, 2024 At 10:00am. Bids Will Be Opened In The Presence Of The Bidder’s Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 10. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The (bid Data Sheet) Bds, Itb Clause 18. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 11. The Bukidnon Second District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Norma A. Ogabang Head, Procurement Unit 09177901575 Email Ad> Procurementunit2017@gmail.com 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: Philgeps Websites And Dpwh Website For Online Bid Submission: Dpwh Website (september 23, 2024) Juvy F. Paulican Bac Chairperson 09661495577 Email Ad> Paulican.juvy@dpwh.gov.ph

Details: Description Section I. Invitation To Bid Da8-goods-2025-02 (pr No. Bt-25-goods-consol-39879-0004) 1. The Department Of Agriculture-regional Field Office No. 8, Through The Multiple Fund Intends To Apply The Sum Of Nine Million One Hundred Thirty Thousand Pesos (p9,130,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For “supply And Delivery Of Agricultural Equipment” Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Department Of Agriculture-regional Field Office No. 8, Undertakes The Bidding Of This Procurement Project As “short-of-award.” Hence, The Notice Of Award To The Winning Bidder Shall Be Issued After Enactment By The Congress Of The General Appropriation Act (gaa) For 2025. 3. The Department Of Agriculture-regional Field Office No. 8, Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within Per Lot (terms And Conditions). Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. Qty Uom Item Description Unit Cost Total Cost Lot 1: 2 Number Recirculating Dryer 2,950,000.00 5,900,000.00 Technical Specifications: 1. Type: Recirculating Batch Type 2. Total Maximum Height: 7.2 M 3. Product Quality A. Cracked Grain, % Increase: 3%, Max B. Head Rice, % Decrease: 5% Maximum C. Hulled/damaged Grain % Increase:2% Maximum 4. Drying System A. Holding Capacity: 6 Tons Wet Palay @ 24% Moisture Content, Minimum B. Moisture Gradient: 2%, Maximum C. Drying Efficiency: 75%, Minimum D. Drying Rate: 1% /hr, Maximum E. Drying Loss/spillage: 1%, Maximum F. With Compatible Electric Motor For Drying System G. Vertical Rectangular Bin- Consist Of Rectangular Vertically Installed Drying Chamber H. With Control Panel I. With Mimic Flow Of Operation J. With Basic Electrical Meter Such As Ammeter And Voltmeter Display 5. With Basic Safety Cut-off Features: A. Emergency Shutdown Button B. With On-off Pilot Lights Switch Button And Indicating Operating Motor, Each Component With Motor Should Have Individual Circuit Breaker C. With Magnetic Starter With Overload D. With Interlocking System And Emergency Button 6. Construction: Stainless Steel-astm 304 For Following Parts Such As: A. Drying Bin Wall/cover B. Discharge Chute C. Elevator Casing D. Bottom Boot Section Of The Elevator E. Drying Chamber: Perforated Screen For Non-lsu Type Or Inverted V-duct For Lsu Type F. Auger G. Auger Casing H. Receiving Hopper 7. Mounting Frame A. Steel Angular Bar (50mmx50mmx6mm, Minimum) B. Mounting Frame Shall Be Fitted With Brackets For Contrete Floor Installation 8. With The Following Components: A. Heating System 1 I. Petroleum Based Fuel: Direct Fired Ii. Heating System Efficiency: 90%, Minimum Iii. With Following Accessories:  Flame Sensor  Electronic Ignition System  Automatic Fuel Shut-off  Adjustable Fuel Vaporizer  Automatic Temperature Control  Temperature Monitoring System  Galvanized Fuel Container Made Of Non-corrosive And Heat-resistant Material At 200 Liters Capacity, Minimum  Compatible Electric Motor For The Heating System B. Heating System 2 I. Biomass Fuel: Indirect-fired Ii. Heating System Efficiency: 50%, Minimum Iii. Can Provide The Required Heating Temperature Or Can Provide 70°c Drying Temperature Iv. Heat Exchanger: Made Of Fire Tubes V. Burning Chamber: Made Of Refractory Bricks  With Automatic Fuel Feeder: Auger/air Blown/plunger Type (provided That The Feeder Is Not Directly Exposed To The Burning Fuel) Vi. With The Following Accessories:  With Temperature Control  With Compatible Electric Motor Vii. Burning Efficiency Of Biomass Furnace: 95%, Minimum  With Compatible Electric Motor C. With Provision Of Ducting To Divert Heat Source From Heating System 1 Or Heating System 2 I. Made Of Stainless Steel Or Primer Painted And Powder Coated B.i Or G.i Sheet D. Dust Collection System Consist Of Cyclone Separator/collector And Suction Blower. All Ducting Shall Be Fabricated From Sheet Metal And The Connectors Must Be Airtight. 9. With Following Accessories: A. Generator Set I. Capacity: Compatible To The Drying System, Able To Provide Sufficient Continuous And Peak Power Requirements Of The Drying System Ii. Voltage Requirement Compatible To The System Iii. Power Supply/generating System Should Be Brand New Iv. Provided With Mechanical Transfer Switch (mts) V. The Electrical Wire, Wire Accessories, And Piping To Connect The Power Generating Unit To The Mts And The Dryer Control Panel/system Shall Be Provided By The Bidder Vi. With The Thermal Insulation And Noise Suppressor B. Portable Handheld Moisture Meter I. Grain: Paddy, Rice, And Other Grains (optional) Ii. Type: Capacitance Iii. Moisture Range:12-25% Or Wider Iv. Accuracy: ≠0.5% Or Better V. Lcd/led Display Vi. Battery Operated Vii. Automatic Density And Temperature Compensation Viii. Product Brochure With Technical Specifications In English C. Standard Heavy Duty Tools: Made Of Tempered Steel And Chrome Vanadium I. One (1) Set Socket Wrench (no. 8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,27,30,32, Minimum) Ii. One (1) Set Combination Wrench (open And Box, 10 Pcs-size Appropriate To The Drying System) Iii. Electrical Plier, 200mm, Minimum Iv. Screwdriver: Philips And Flat Head, 300mm,minimum V. Grease Gun, 250mm Cylinder Length, Minimum Vi. Mechanical Pliers, 200mm, Minimum Vii. Heavy Duty Toolbox And Roll Up Tools Holder  Size That Could Accommodate The List Of Tools D. Vacuum Cleaner With Air Blower I. Rated Input Power:1,000 W, Minimum Ii. Vacuum Cord: 5m, Minimum E. Basic Safety Kits F. Personal Protective Equipment  Dust Mask  Safety Goggle  Ear Muff/ear Plug G. One (1) Unit Fire Extinguisher H. Dry Chemical, Stored Pressure Type, 6.80 Kg, Minimum I. Automatic Portable Bag/sack Closer/sewer 10. With Compatible Biomass Furnace 11. With Compatible Transformer 12. Provide Reflectorized And Waterproof Da-rice Logo (12" X 12") Lot 2: 2 Number Walk Behind Transplanter 400,000.00 800,000.00 Technical Specifications: 1. 4 Stroke Gasoline Engine At 4 Hp, Minimum 2. Number Of Planting Rows: 4 Rows, Minimum 3. Row Spacing: 30 Cm 4. Hill Spacing: 12-21cm, Adjustable 5. Field Efficiency: 80%, Minimum 6. Percent Damaged Hills And Percent Missing Hills: 10%, Maximum 7. Noise Emitted: 92db, Maximum 8. With Low Bed Trailer 9. With Manually Operated Seed Sowing Machine With Valid Amtec Test Report 10. With Compatible Seedling Tray: 500 Pcs, Minimum A. Dimension: 60cm X 30cm X 3.5cm (length X Width X Thickness) B. Hole Aperture: 1-1.5mm 11. Holder And Accessories Required For Maintenance With Full Dealer Optional Parts 12. With Original Equipment Manufacturers Manual Written In English. 13. With The Following Standard Heavy Duty Tools And Accessories: A. Open Wrench Set B. Adjustable Wrench (12") C. Grease Gun D. Philips And Flat Screw Driver E. Roll Up Tools Holder F. Provide Personalized/ Fitted Material (water Resistant) For Covering G. With Personal Protective Equipment (minimum Of 3 Sets Each) I. Dust Mask Ii. Earmuff Iii. Eye Protection (safety Goggles) Iv. Hand Gloves H. Provide With Engine Driven Power Sprayer/ Pressure Washer Automatic Type I. .provide With Extra 2 Liters Engine Oil 14. Provide Reflectorized And Water Resistant Da-rice And Da-noap Logo (4" X 4") 15. Conform To Paes/pabes 151:2015 16. With Engrave Nameplate Containing Atleast The Chasis And Engine Number Lot 3: 1 Number Float-assist Type Walking Type Tractor (floating Tiller) 130,000.00 130,000.00 Technical Specifications: 1. Type: Mudboat 2. Rated Power: Minimum Of 10 Hp Diesel Engine, Aircooled 3. Fuel Consumption: Maximum Of 2.5li/hr 4. Continuous Power: 85% Of Rated Power, Minimum 5. Peak Transmission: 80%, Minimum 6. Total Cutting Width: 1.0 Meter Minimum 7. Noise Emitted: 95 Db, Maximum 8. Complete With Throttle Lever And Clutch Lever On The Handle Bar 9. The Unit Should Be Painted Finish, With Rust-proofing Primer And Final Paint Color 10. With The Following Standard Heavy Duty Tools And Accesories: A. Open Wrench Set B. Adjustable Wrench (12") C. Grease Gun D. Philips And Flat Screw Driver E. Roll Up Tools Holder F. Provide Personalized/ Fitted Material (water Resistant) For Covering G. With Personal Protective Equipment (minimum Of 3 Sets Each) I. Dust Mask Ii. Earmuff Iii. Eye Protection (safety Goggles) Iv. Hand Gloves H. Provide With Engine Driven Power Sprayer/ Pressure Washer Automatic Type I. Provide With Extra 2 Liters Engine Oil 11. Provide Reflectorized And Water Resistant Da-rice Logo (4" X 4") 12. Conform To Paes/pabes 347:2022 13. With Engrave Nameplate Containing Atleast The Chasis And Engine Number Lot 4 2 Number Rice Mill (single Pass) 1,150,000.00 2,300,000.00 Technical Specifications: 1. Rubber Roll Dehuller 2. Input Capacity: Minimum Of 0.5 Ton/hr At 98% Purity 3. Hulling Efficiency: 75% Minimum 4. Prime Mover: 23 Hp Diesel Engine (minimum), Watercooled With Brand New Battery (atleast 3sm) 5. Milling Recovery Index: 0.98 Min. 6. Percent Head Rice Index: 0.90 Min. 7. With Protection For All Moving Parts 8. With Pre-cleaner A. Input Capacity: Should Be Compatible With The Hulling Capacity Of The Units To Be Supplied (375kg/hr Minimum) 9. With Trailer A. Steel Made Channel Reinforced By Steel Angular Bars B. Leaf Spring Suspension System C. With Brand New Tires (pneumatic) D. With Reflectorized Slow Moving Vehicle Emblem 10. With Bucket Elevator A. Material: Plastic 11. With The Following Standard Heavy Duty Tools And Accessories: A. One (1) Unit Weighing Scale With 500kg Capacity Minimum B. One (1) Piece Calibrated Grain Moisture Monitoring Device (portable Handheld Moisture Meter) J. Grain: Paddy And Rice Ii. Type: Capacitance Iii. User’s Manual In English C. With Fire Extinguisher For Fire Caused By Flammable Liquids I .class B Ii. Six (6) Liters Capacity D. Open Wrench Set E. Adjustable Wrench (12") F. Grease Gun G. Philips And Flat Screw Driver H. Roll Up Tools Holder I. Provide Personalized/ Fitted Material (water Resistant) For Covering J. With Personal Protective Equipment (minimum Of 3 Sets Each) I. Dust Mask Ii. Earmuff Iii. Eye Protection (safety Goggles) Iv. Hand Gloves K. Provide With Electric Driven Power Sprayer/ Pressure Washer Automatic Type L. Provide With Electric Blower That Has Minimum Of 700w Rated Input Power M. Provide With Extra 2 Liters Engine Oil 12. Provide Operation Equipment Manual 13. Provide Reflectorized And Water Resistant Da-rice Logo (6" X 6") 14. With Engrave Nameplate Containing Atleast The Chasis And Engine Number Terms And Conditions: A During The Opening Of Bids, Bidders Shall Submit: 1 Certificate Of Accredited Service Center Within The Region That Could Respond Within 72 Hours (including Holidays And Weekends) Upon Request Of The End-user/beneficiary; 2 Namdac Certificate Of Accreditation; 3 Section Vii (technical Specifications) Of Bidding Document, Which Must Be Signed And Sealed By Licensed Agricultural Engineer/agricultural Biosystems Engineer; 4 Valid Amtec Test Report: I. Recirculating Dryer With A Similar Drying System Conform To The Pns.paes 201:2015 Standard For Moisture Gradient, Drying Rate, Product Quality, Drying Loss/spillage, Drying Efficiency, And Heating System Efficiency. Should Be Provided With Separate Amtec Test Report For Both Heating System. Ii. Engine Iii. Float-assist Type Walking Type Tractor (floating Tiller) Coupled With The Offered Engine Iv. Mechanical Rice Transplanter (walk-behind) Coupled With The Offered Engine V. Rice Mill (single Pass) Coupled With The Offered Engine 5 Warranty Certificate For Services, Parts, And Other Components Due To Manufacturing Defects Upon Acceptance With Minimum Of Two (2) Years For Lot 1 Only; 6 Warranty Certificate For The Machinery And Equipment Being Offerred For Lot 2, 3, & 4 Only: A. Minimum Of 1 Year For Engine From Date Of Acceptance B. Minimum Of 1 Year On Parts And Services From Date Of Acceptance. 7 Valid Certificate Of Dealership/distributorship/authority To Sell; 8 Certification Guaranteed Spare Parts Availability For At Least Five (5) Years For Lot 1 Only; 9 Permit To Operate (pto) From Bafe; B During Post-qualification, The Bidder Shall Submit: 1 Provide Certification Of Very Satisfactory Performance Of The Recirculating Dryer Being Offered As To: I) Machinery Performance; Ii) Machinery Durability And; Iii) Availability Of Parts And Service, Issued By Any Government Or Private Company Agency/company In Asian Countries, Excluding Da-rfo8, Duly Signed By The Current Head Of Agency/company Within The Last One (1) Year. The Bidder Shall Provide List Of Five (5) Customer/clients With Addresses And Contact Numbers, And Certification From At Least One (1) Customer/client Issued By Any Government For Lot 1 Only; 2 Manufacturer's Distributor's Or Bidder's Certification That The Proposed Grain Dryer Brand Has Been In The Market For The Last 5 Years, Accompanied Or Duly Supported By Documentary Proof. The Documentary Proof Must Be Verifiable Through Phone Call, Ocular Inspection Or Both, Covering The Period Beginning From 2019 Or Erlier And Maybe Any Or A Combination Of The Following (for Lot 1 Only): A. Record Of Sales B. Dealership Or Servicing Agreements Indicating The Brand Subject Thereof C. Manufacturer's Or Distributor's Certification Of Market Presence, Indicating The Name/s And Address/es Of The Dealers D. Bill Of Lading And/or Other Similar Records Indicating Shipment Or Delivery Of The Grain Dryer Brand To The Philippines E. Client's Affidavit Indicating Client's Complete Address And Telephone Number, Brand, Type, And Model Of Grain Dryer, Date Of Purchase And Duly Supported By Physical Proof Of Grain Dryer 3 Copy Of Equipment Manufacturer's Manual (in English) For Lot 1 Only: A. Recirculating Dryer Unit And Each Component Such As Drying Unit, Drying System, Generator Set, And Portable Handheld Moisture Meter Written In English/filipino 4 Certificate Of Conformity From Bafe I. Recirculating Dryer Ii. Mechanical Rice Transplanter (walk-behind) Iii. Float-assist Type Walking Type Tractor (floating Tiller) Iv. Rice Mill (single Pass) C Winning Bidder/s Shall: 1 Deliver And Install Genuine, Unaltered, And Brand New Units; 2 Conduct Formal Training, After Complete Delivery And Installation Of The Items, For The Operation And Maintenance Of The Equipment To At Least Two (2) Operators And Provide Copies Of The Training Module Written In English/filipino; 3 Deliver And Install (if Necessary) The Units To The Intended Recipients As Indicated In The Attached List Of Delivery Points Upon Receipt Of Ntp. Lot 1: Within 60 Calendar Days Lot 2: Within 30 Calendar Days Lot 3: Within 20 Calendar Days Lot 4: Within 60 Calendar Days 4 Shoulder The Delivery And Handling Cost To The Specified Drop-off Point, Materials For Testing, Fuels, And Other Necessary Requirements. 5 Inform The End-user And General Services Section (gss) Seven (7) Calendar Days Prior To The Schedule Of Delivery; 6 Non-stainless Material Should Be Painted With Rust-proofing Primer And Final Paint Color For Lot 1 Only D Any Delay Of Delivery Of Item Shall Be Subjected To Liquidated Damges Equivalent To 1/10 Of 1% Of The Contract Price Per Day Of Delay Of The Undelivered Items; E Payment Scheme: A. 100% Payment Shall Be Made Upon Complete Delivery, Inspection, Amtec System Testing (test Report With Acceptable Rating), After The Conduct Of Training In The Operation And Maintenance Of The Machineries And Equipment; And Acceptance Per Lot F Winning Bidder/s Shall Submit A Snapshot Of Business Bank Account (preferably Landbank) To Effect Payment. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. Bidding Is Open To All Interested Bidders, Whether Local Or Foreign, Subject To The Conditions For Eligibility Provided In The Irr Of Ra 9184. 5. Prospective Bidders May Obtain Further Information From Department Of Agriculture – Regional Field Office 8 And Inspect The Bidding Documents At The Address Given Below During Office Hours From 8:00am To 5:00 Pm. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 09 To December 03, 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee, Pursuant To The Latest Guidelines Issued By The Gppb. The Cost Of The Bidding Documents Shall Correspond To The Total Abc Of The Selected Lot/s On Which The Supplier Intends To Bid, With A Range As Indicated In The Table Below. Approved Budget For The Contract Maximum Cost Of Bidding Documents (in Philippine Peso) 500,000 And Below 500.00 More Than 500,000 Up To 1 Million 1,000.00 More Than 1 Million Up To 5 Million 5,000.00 More Than 5 Million Up To 10 Million 10,000.00 7. The Department Of Agriculture-rfo 8 Will Hold A Pre-bid Conference On November 19, 2024, 9:00 Am (bac-secretariat Time) At Da8 Bac Office, 4th Floor Green Bldg., Kanhuraw Hill, Tacloban City And Through Face To Face Or Video Conferencing Or Webcasting Via Google Meet, Which Shall Be Open To Prospective Bidders. 8. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before December 03, 2024, 9:00 Am (bac-secretariat Time). Late Bids Shall Not Be Accepted. 9. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 10. Bid Opening Shall Be On December 03, 2024, 9:00 Am (bac-secretariat Time) At Da8 Bac Office, 4th Floor Green Bldg., Kanhuraw Hill, Tacloban City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend Either Physically Or Through Video Conferencing Via Google Meet. 11. The Department Of Agriculture-rfo 8 Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. Da Does Not Condone Any Form Of Solicitation On Any Prospective Winning And Losing Bidders By Any Of Our Staff/employees Or Any Other Party. Any Sort Of This Kind Shall Be Reported Immediately To The Office Of The Secretary Or The National Bureau Of Investigation (nbi) For Entrapment And Proper Investigation. 13. For Further Information, Please Refer To: Martins A. Alde Head, Bac-secretariat Department Of Agriculture, Regional Field Office-8 Kanhuraw Hill, Tacloban City Darfo8.bacsec@gmail.com Mobile No. 09061694318 Easternvisayas.da.gov.ph 14. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.philgeps.gov.ph Or Easternvisayas.da.gov.ph Approved By: (sgd.) Larry U. Sultan, Jd Chairman, Bids And Awards Committee