Tenders of Offizielle Bezeichnung

Contract notice – General guideline, standard regulation Open procedure (construction work) Bk IV electrical installation in accordance with DIN 18382 at the Waldau campus Bk IV electrical installation in accordance with DIN 18382 at the Waldau campus Bk IV electrical installation in accordance with DIN 18382 at the Waldau campus Bk IV electrical installation in accordance with DIN 18382 at the Waldau campus Bk IV electrical installation in accordance with DIN 18382 at the Waldau campus

Contract notice – General guideline, standard arrangements Open procedure (services) Uhr Kiz 87+147 Maintenance cleaning 2,718.70 M² + 2 basic cleanings 4,862.8 M² Uhr Kiz 87+147 Maintenance cleaning 2,718.70 M² + basic cleaning 4,862.8 M²

Contract notice – general guideline, standard rule open procedure (construction work) Jahnschule Hünfeld, conversion and modernization, wallpapering and interior painting work Ba 2+3 Jahnschule Hünfeld, conversion and modernization, wallpapering and interior painting work Ba 2+3 Jahnschule Hünfeld, conversion ... Mehrjahnschule Hünfeld, conversion and modernization, wallpapering and interior painting work Ba 2+3 Jahnschule Hünfeld, conversion and modernization, wallpapering and interior painting work Ba 2+3 Jahnschule Hünfeld, conversion and modernization, wallpapering and interior painting work Ba 2+3 The district committee of the Fulda district, represented by the building management department, intends to convert and modernize the Jahnschule Hünfeld. The focus of the measures is the fundamental renewal of the technical building equipment and the internal reorganization of functional areas and usage units. Furthermore, the extension of the building with a single-storey extension and a barrier-free elevator is planned. Basically, the technical building equipment will be renewed throughout the building as well as many of the interior surfaces (suspended ceilings, floor coverings, wall coverings, etc.). The measures described on the building must be carried out in parallel with ongoing school operations. For this purpose, the overall measure will be divided into four construction phases, two of which (2nd phase + 3rd phase) will take place at the same time. The subject of this service description is the wallpapering and painting work of the 2nd and 3rd phases. Essentially, the following types of work are to be carried out: - Preparing wall and ceiling surfaces for cladding with glass fabric - Creating the cladding of wall and ceiling surfaces with glass fabric - Creating the coating of wall and ceiling surfaces with emulsion paint

Contract notice – general guideline, standard regulation Open procedure (services) Specialist planning services for thermal insulation and energy balancing for the roof renovation of the main building with towers and adjoining gymnasium at the Augustinerschule in 61169 Friedberg Specialist planning services for thermal insulation and energy balancing for the roof renovation of the main building with towers and adjoining gymnasium at the Augustinerschule in 61169 Friedberg. Specialist planning services for thermal insulation and energy balancing for the roof renovation of the main building with towers and adjoining gymnasium at the Augustinerschule in 61169 Friedberg Object description The planned construction project involves the roof renovation of the main building of the Augustinerschule with the adjoining gymnasium. The three-storey building with a two-storey roof truss forms an L-shape and closes off the property from Leonhardstrasse and the junction of Schützenrain. The north-south section of the building is approximately 60 m long and 10 m wide. The two-storey caretaker's house from the time of construction is attached to the northern end of this building. The extension to the south, which is L-shaped, is approximately 18 m long and 6 m wide. The gymnasium from the time of construction and its ancillary rooms is attached to the western end of this part of the building on Schützenrain. The building, constructed using solid masonry, is plastered and has sandstone window surrounds and corner stones. The roof, bay windows, towers and one of the curved gables are slated. The ground floor and second floor of the building are used for teaching purposes. The school administration rooms are on the first floor. The basement houses a workshop, archive and storage rooms and the building services. Measures to be carried out: - Roof renovation of the main building and the adjacent gymnasium with removal of the existing slate roof covering and new slate installation in accordance with the existing old German roof covering, including ridge, valley, hip, eaves and verge coverings, valleying of dormers and slate covering of the dormers, slate covering of three onion-shaped bay tower roofs with 5 roof surfaces and slate covering of two bay windows. - Slate covering of four gable surfaces with curved sides and semi-circular upper finish; - Renewal of the existing plumbing work including installation of new cover plates on the dormers and new sheet metal coverings of the curved gable wall widths including the semi-circular upper finish; - Sheet metal covering of the multi-curved facade wall of the gymnasium facing Schützenrain. Renewal of skylights; - Construction of the scaffolding required for roof renovation, including obtaining any necessary permits; - Carpentry repairs to the 48 dormers and rafters where required. Renewal of gable cornices; - Repairs to 17 tall rectangular windows and a window consisting of three window elements arranged next to each other in the gable areas and repairs and renewals to the dormer window shutters; - Removal and renewal of the paint on the dormers and dormer shutters and repainting of the carpentry improvements. Painting of gable cornices; - Repairs to the weather vane on the onion-shaped bay roof; Repairs to the weather vane above the bay window of the gymnasium. Repairs to the sheet metal roof above the bay window in the schoolyard; - Renewals to the lightning protection in the renovation area and insulation of the top floor ceiling. Construction or execution time: The planned renovation will take place in the area of the roof areas above the main building and the adjacent gymnasium (see appendix "roof area diagram and example division of construction phases") and can be carried out in 4 construction phases. The first construction phase of the renovation will take place in the area of the roof areas above the southern wing of the building and is to be completed by October 2025. The other construction phases are expected to be completed by the end of 2027. For further information, please refer to appendix 01_object description.

Contract notice – General guidelines, standard rules Open procedure (services) Schirn - Transport and packaging services for works of art in any form The client intends to conclude a framework agreement for the transport and packaging of works of art in any form to and from the Schirn Kunsthalle Frankfurt to and from various lenders within Germany, Europe and other continents. The framework agreement is to have a term of 4 years. Schirn - Transport and packaging services for works of art in any form The client intends to conclude a framework agreement for the transport and packaging of works of art in any form to and from the Schirn Kunsthalle Frankfurt GmbH to and from various lenders within Germany, Europe and other continents. The framework agreement is to have a term of 4 years. The Schirn Kunsthalle Frankfurt has committed itself to calculating the annual CO2 emissions that arise in connection with each exhibition project, among other things, in a climate balance sheet. The transport companies provide usable data for the calculation. This can be done either by specifying the expected emissions in the respective initial offer and in the invoice, whereby the calculation method must be presented in a transparent and comprehensible manner. If an emissions calculation is not possible, information on air, sea or truck transport (fuel consumption, payload, truck size) as well as on packaging (transport crates, etc.) and packaging materials are an integral part of the transport offers/invoices. Information on transport weight (kg/vol) and transport routes (km) is also necessary. The contractor's tasks include in particular: - Appropriate packaging of the exhibits - Transport of the exhibits to and from the Schirn Kunsthalle Frankfurt GmbH (land, air, sea freight) - Handling all associated formalities, national and international - Support of the couriers accompanying the art, where necessary - Storage of works of art and empty boxes, where necessary - Recording of data for climate balance Only offers that meet all the requirements of the service description, including the legal framework, and that can comply with the specifications given as minimum conditions will be considered for the award of the contract.

Contract notice – General guideline, standard regulation Open procedure (supplies) Rental and maintenance of 92 brand new (1st approval) and networked copying and printing systems with color function for the business area of the Kassel Regional Council (pool contract) The rental ... Additional rental and maintenance of 92 brand new (1st approval) and networked copying and printing systems with color function for the business area of the Kassel Regional Council (pool contract) The rental and maintenance of 92 brand new (1st approval) and networked copying and printing systems with color function (pool contract) for installation at various locations of the Kassel Regional Council. Rental and maintenance of 92 brand new (1st registration) and networked copying and printing systems with color function for the business area of the Kassel Regional Council (pool contract) Rental and maintenance of 92 brand new (1st registration) and networked copying and printing systems with color function. All devices are to be offered by one manufacturer. The machines to be offered must meet the following minimum requirements: - The safety regulations for office workstations in the version valid at the time the offer is submitted. - The generally recognized rules of technology (e.g. DIN 31000, DIN 31001 or equivalent). The provider guarantees that the machines, devices and the like ordered from him comply with the accident prevention regulations (autonomous legal norms) enacted in the Federal Republic of Germany by the statutory accident insurance providers, the occupational health and safety regulations and the generally recognized safety and occupational health rules. - The individual requirements for the devices can be found in Appendix 1 ("druckrpks_anlage 1") - The requirements for the management software can be found in Appendix 2 ("druck- Rpks_anlage 2"). Existing test certificates, clearance certificates and safety data sheets for the machines offered must be enclosed with the offer. In addition, the following applies to all systems: - If systems with a hard drive are requested or supplied, the costs for a security tool for hard drive data overwriting in accordance with ISO 15408 EAL 3 (or equivalent) must be included in the price - User data such as print data/scan data is stored encrypted on the internal hard drive and automatically deleted after the order has been completed - When the device is taken out of service, all data and the configuration are securely deleted (wiped) by the contractor. The client receives written confirmation of the BSI-compliant (or equivalent) deletion. The same applies in the event of a hard drive failure during the contract term - Black and white printing must be pre-set as standard in the driver - Uniform printer driver for all systems - Controllable/configurable user interface presets must be possible - If systems are offered with additional, non-required interfaces and/or modules (e.g. GSM/WLAN/Bluetooth/NFC/USB/etc.), these functions must be deactivated - Management software In addition to Appendix 2, the following applies: Software must be offered that enables administrators to display information on the individual devices using a reporting and management tool (e.g. system information, meter readings, utilization and cost center reports). The software must enable the administration of up to 2000 users. The software update is included in the maintenance. The offer must contain a sufficient number of required licenses (management software, maintenance licenses, printing system licenses, scanning licenses, OCR and the like). The software is to be installed centrally on two redundant server systems (available for fail-safe management) and must enable printing and, at times, scanning (scan-to-mail) at the various locations (keyword: "follow me printing"). There must be cross-location functionality (printing across location boundaries) (all locations are networked with each other). Employees are to be authenticated using a contactless card reader (for existing Legic chips (mim256/mim1024)) on the end device and by entering a PIN. - As part of the initial setup, the contractor must ensure that the setup or basic configuration (network, scan, followme, server) is carried out in accordance with the client's specifications and must also continue to maintain this as part of the maintenance contract. - The device automatically reports fault messages and the need for consumables (toner) - except paper and staples - to the contractor and to a central email address of the client by email, a remote tool, appliance or similar. - Consumables are delivered (Mon.-Fri.) within 2 working days of the order. In addition to the generally automated ordering and delivery, it must be possible to order consumables by phone, email or web interface at no extra cost. - The client ensures that appropriate network connections are available at the locations of the systems for which network integration is planned. He also ensures the necessary server access and support from internal administrators who are familiar with the existing infrastructure. - The contractor undertakes to take back used toner containers, cartridges, waste toner, photoconductors, waste developers, ozone filters and catalysts, etc. in a timely manner and to ensure that they are reused or disposed of properly. The costs are included in the price. The client will be informed by the contractor about the return procedure in an appropriate form. The costs incurred for the return are included in the price. - The contractor undertakes to instruct the staff (multipliers) in the correct use of the systems (application, troubleshooting (replacement of consumables, paper jams)) and to point out the use of the energy-saving functions offered by the system (power management). For this purpose, training is required on site for each organizational unit. - The bidder also provides a short operating manual for each device (pdf). - In addition, the contractor must carry out separate training on the administration and configuration of the systems for the system administrators on site at the Kassel location. - The briefing must take place centrally for each property (at Altes Stadtschloss 1, Zb is one property). For this purpose, several appointments for around 10 people each must be held over two days.

Contract notice - general guidelines, standard rules, open procedure (construction work) Steinachtalschule, Abtsteinach - general renovation with new building - metalworker (t3) The subject of this tender is the manufacture, delivery and assembly of vertically installed windows, post and beam facades, French doors and window elements in aluminum construction, including surface treatment, glazing and, where required, sun protection systems or other additional equipment. The type and scope of the services to be offered are described in the contract. The construction must meet the requirements of frame material group 1 according to DIN 4108 T.4, Tab. 3. A system test in accordance with the quality and test regulations according to RAL-RG 424/2 and proof of driving rain tightness and joint permeability according to DIN 18055 Bag C for building heights up to 100 m must be available. The post and beam facade and the glass roof must be offered and implemented with "cradle to cradle" certification. A "blower door test" will be carried out after completion. Steinachtalschule, Abtsteinach - general renovation with new building - metal construction fitter (t3) The subject of this tender is the manufacture, delivery and assembly of vertically installed windows, post and beam facades, French doors and window elements in aluminum construction including surface treatment, glazing and, if required, sun protection systems or other additional equipment. The type and scope of the services to be offered are described in the tender. The construction must meet the requirements of frame material group 1 according to DIN 4108 T.4, Tab. 3. A system test in accordance with the quality and test regulations according to RAL-RG 424/2 and proof of driving rain tightness and joint permeability according to DIN 18055 Bag C for building heights up to 100m must be available. The post and beam facade and the glass roof must be offered and implemented with "cradle to cradle" certification. A "blower door test" is carried out after completion.

Contract notice – general guidelines, standard rules for open procedures (construction work) Groß-gerau district, new primary school in Worfelden (3-stream) Hermann-Schmitt-Strasse 32, 64572 Büttelborn-Worfelden Interior plastering work Groß-gerau district, new primary school in Worfelden (3-stream) Hermann-Schmitt-Strasse 32, 64572 Büttelborn-Worfelden Interior plastering work Groß-gerau district, new primary school in Worfelden (3-stream) Hermann-Schmitt-Strasse 32, 64572 Büttelborn-Worfelden Execution of interior plastering work, consisting of preparation, interior plastering and hourly wage work for a 3-stream, two-storey primary school, consisting of 5 buildings and a connecting access corridor (“Schulstrasse”).

Contract notice – general guideline, standard arrangements negotiated procedure with prior publication of a call for competition/negotiated procedure (services) Tnw_hls_sankt Vincenzstift Ggmbh_renovation of the indoor swimming pool at the Vincenzschule in Rüdesheim am Rhein. The Sankt Vincenzstift Ggmbh is planning the energy-efficient renovation of the swimming pool at the Vincenzschule in Rüdesheim ... Moretnw_hls_sankt Vincenzstift Ggmbh_renovation of the indoor swimming pool at the Vincenzschule in Rüdesheim am Rhein. The Sankt Vincenzstift Ggmbh is planning the energy-efficient renovation of the swimming pool at the Vincenzschule in Rüdesheim am Rhein. The subject of the contract are the basic services of service phases 1-9 of the service profile for specialist planning of technical equipment in accordance with Section 55 Paragraph 1 Hoai IVM Annex 15 No. 15.1 in system groups 2, 3, 7 (swimming water technology) and 8 (lph. 4 subject to necessity) as well as the special service of monitoring the elimination of defects within the limitation period. Tnw_hls_sankt Vincenzstift Ggmbh_sanierung Indoor swimming pool of the Vincenzschule in Rüdesheim am Rhein A comprehensive description of the task can be found in the tender documents. Sankt Vincenzstift Ggmbh is planning the energy renovation of the swimming pool of the Vincenzschule Rüdesheim am Rhein, Ot Aulhausen. The renovation concept is to be designed in such a way that the swimming pool will exceed the energy standard Beg 70 Efficiency House and the required 75% minimum quota for renewable energies. In addition, the installation of an ultrafiltration system is intended to reduce the drinking water and heat required to operate the swimming pools. The aim of the planned renovation is to: - reduce current energy requirements from 209,000 kWh/year to 52,256 kWh/year (savings of 156,744 kWh/year) - reduce CO2 emissions by 71,444 kg/year (-82%) - reduce primary energy requirements by 75% to 40 kWh/m² per year - maintain water quality without constantly adding disinfectants - greatly reduce the use of chemicals - reduce drinking water requirements The following investment measures in cost groups 300, 400 and 700 are planned to achieve the energy goals: 0. Planning 1. Renovation or new construction of the water treatment system for the swimming pools, taking energy-efficient construction into account (energy and resource savings). 2. Renovation of the pool hydraulics in the swimmers' pool to ensure hygienically perfect flow. 3. Renovation of the therapy pool. 4. Renovation of the side room ventilation taking energy-efficient construction into account (energy saving). 5. Installation of an air and water heat pump (approx. 80kw) for climate-friendly generation of heat to operate the indoor pool and to reduce climate-damaging CO2 emissions. 6. Construction of a photovoltaic system (291kwp) to partially cover the electricity required for indoor pool operation. On the one hand, this system absorbs the additional electricity consumption of the new water technology and, on the other hand, contributes to achieving climate goals by reducing the electricity taken from the grid. 7. Installation of a biogas-powered cogeneration plant (approx. 50kw) to support heating and provide basic supplies for the indoor pool's electrical consumers. 8. Installation of an ultrafiltration system to reduce the drinking water requirement (resource saving) and heat requirement (energy saving) for the operation of the swimming pools (recovery of the process water from the filter rinse water). The project is mainly funded by federal funds, but state funds are also granted. The following timetable is drawn up for the implementation of the measures: In 2025: Start of the project - Preparation of the basic planning: Design, approval and implementation planning for measure 6 (PV system) By August 2025 - Installation of PV system (measure 6) August 2025 to November 2025 - Preparation of the basic planning: Design, approval and implementation planning for measures 1-5 and 7-8 (renovation or new construction of water treatment, renovation of the pool hydraulics of the swimming pool, renovation of the therapy pool, renovation of the side room ventilation, installation of an air-water heat pump, installation of a biogas-powered combined heat and power plant, installation of an ultrafiltration system to reduce water and heat consumption) In 2026: - Preparation of the basic planning: Completion of the implementation planning for measures 1-5 and 7-8 - Planning: Construction management tasks - renovation or new construction of water treatment (measure 1) - Renovation of the pool hydraulics of the swimmers' pool (measure 2) - Renovation of the therapy pool (measure 3) - Renovation of the adjoining room ventilation (measure 4) - Planning: construction management tasks - renovation or new construction of water treatment (measure 1) - Renovation of the pool hydraulics of the swimmers' pool (measure 2) - Renovation of the therapy pool (measure 3) - Renovation of the adjoining room ventilation (measure 4) - Installation of an air-water heat pump (measure 5) - Installation of an ultrafiltration system to reduce water and heat consumption (measure 8) In 2027: - Planning: construction management tasks - renovation or new construction of water treatment (measure 1) - Renovation of the adjoining room ventilation (measure 4) - Installation of a biogas-powered cogeneration plant (measure 7) - Acceptances, checking of last outstanding invoices - Project completion by the end of December 2027 Basic documents have already been prepared and will be made available. The planning services are awarded from phase 1 onwards. The subject of the contract are the basic services of phases 1-9 of the scope of work for specialist planning of technical equipment in accordance with Section 55, Paragraph 1 of the Hoai IVM Annex 15, No. 15.1 in system groups 2, 3, 7 (swimming water technology) and 8 (phase 4 subject to necessity) as well as the special service of monitoring the elimination of defects within the limitation period.

Contract notice – general guidelines, standard rules for open procedures (construction work) Groß-gerau district, new primary school in Worfelden (3-stream) Hermann-Schmitt-Strasse 32, 64572 Büttelborn-Worfelden Interior plastering work Groß-gerau district, new primary school in Worfelden (3-stream) Hermann-Schmitt-Strasse 32, 64572 Büttelborn-Worfelden Interior plastering work Groß-gerau district, new primary school in Worfelden (3-stream) Hermann-Schmitt-Strasse 32, 64572 Büttelborn-Worfelden Execution of interior plastering work, consisting of preparation, interior plastering and hourly wage work for a 3-stream, two-storey primary school, consisting of 5 buildings and a connecting access corridor (“Schulstrasse”).