Tenders of Offizielle Bezeichnung

Contract notice - General guideline, standard regulation Open procedure (supplies) 1 Tlf 3000- W (forest fire) Construction and delivery of a Tlf 3000 W in accordance with DIN 14530 Part 22 and the French standard NF S 61-218 1 Tlf 3000- W (forest fire) 1 piece Construction and delivery of the ... More1 Tlf 3000- W (forest fire) Construction and delivery of a Tlf 3000 W in accordance with DIN 14530 Part 22 and the French standard NF S 61-218 1 Tlf 3000- W (forest fire) 1 piece Construction and delivery of the vehicle in one lot.

Contract notice - General guidelines, standard rules Open procedure (supplies) Kir fire brigade protective clothing and fire protection clothing Delivery of 360 pieces of fire brigade protective clothing and 120 pieces of fire brigade clothing Kir fire brigade protective clothing and fire protection clothing For the equipment of the fire brigades in the city of Kirchhain, the manufacture and delivery of 360 pieces of fire brigade protective clothing and 120 pieces of fire brigade clothing in different sizes for men and women is required.

Contract notice – general guidelines, standard rules, open procedure (construction work) New community center in Heilsberg + daycare center – roof sealing The new community center with daycare center is planned as a free-standing new building on its own plot of land. The plot of land is undeveloped and served as a public green space. The service being advertised is roof sealing and sprinkler work. New community center in Heilsberg + daycare center – roof sealing Roof sealing and sprinkler work in accordance with the service description/list of services. This is a partial construction measure in connection with the new community center + daycare center in Bad Vilbel.

Contract notice – general guideline, standard regulation, open procedure (construction work) Carpentry work – interior fittings, furnishings, new construction of a 5-group daycare center in Nidderau-Heldenbergen Carpentry work – interior fittings, furnishings, manufacture and assembly of kitchen furniture, ... More Carpentry work – interior fittings, furnishings, new construction of a 5-group daycare center in Nidderau-Heldenbergen Carpentry work – interior fittings, furnishings, manufacture and assembly of kitchen furniture, wardrobes, wall units, changing tables and paneling Scope of services: The services are to be offered as complete services, manufacture, delivery and assembly/installation, including professional disposal of the resulting building protection. Carpentry work – interior fittings, furnishings, new construction of a 5-group daycare center with 13 residential units The existing daycare center in the Heldenbergen district is becoming too small. Due to the planned expansion of the city of Nidderau, the range of daycare centers needs to be expanded. This need is met by the planned new building for the Kita Allee Mitte II. The new building is planned as a wedge-shaped, two-storey standard building, with the daycare center on the ground floor and 13 apartments on the upper floor. The total length of the complex is approximately 60.00 x 25.00 m on average. The gross floor area ground floor + upper floor is approximately 2,586 m². The new building will be constructed as a two-storey solid structure without a basement. The roof will be partly a solid flat roof with bituminous waterproofing, and partly a wooden roof truss with nail plate trusses, which will make the group rooms of the daycare center and the apartments above it stand out as individual houses. The facades will be partly ventilated, curtain facades with wooden cladding, and partly a thermal insulation composite system, in compliance with current local requirements. The windows and external doors are designed as triple glazing. The summer heat protection of the window surfaces is provided by external venetian blinds and roller shutters. The trade work "carpentry - interior design, furnishing" includes the following services: Construction site setup / construction process in accordance with Be - construction site setup work Setting up the trade's own construction site equipment - carpentry work Manufacturing and assembly of kitchen furniture, wardrobes, wall units, changing tables and cladding Scope of services: The services are to be offered as complete services, manufacture, delivery and assembly / installation, including professional disposal of the resulting building protection. The work begins on February 17, 2025 and is to be completed by April 18, 2025. The start and end of the work are specified in the order letter. The individual deadlines stated in the order letter are binding deadlines. Preparatory work: Drawing up the work plan: 10 days, Mon. February 17, 2025 - Fri. February 28, 2025 Preparatory work: Review of the work plan: 5 days, Mon. 03.03.2025 - Fri. 07.03.2025 Production and delivery: 20 days, Mon. 10.03.2025 - Fri. 04.04.2025 Assembly and installation: 10 days, Mon. 07.04.2025 - Fri. 18.04.2025

Contract notice – General guideline, standard scheme Negotiated procedure with prior publication of a call for competition/negotiated procedure (services) Youth and social services software Ekom21 intends to award a framework agreement on a platform for youth and social services. This includes in particular licensing (the area ... More youth and social services software Ekom21 intends to award a framework agreement for a platform for youth and social services. This includes in particular licensing (the provision of the platform for youth and social services), software maintenance and other support services. Youth and social services software The aim of Ekom21 is a paperless and media-independent platform for youth and social services, including an e-government portal for submitting and processing applications and a connection to document management systems. The platform is to be maintained across disciplines in the social services team so that the specialist and technical support can be distributed among existing employees. A professional platform for youth and social services enables efficient and citizen-oriented administration. The expectations and needs of users are to be supported in a way that makes work easier - in particular through a consistently innovative, usable platform with extensive functional equipment and taking into account permanent further development.

Contract notice - General guideline, standard regulation Open procedure (construction work) New building Florenbergschule Pilgerzell, ventilation work Building automation New building Florenbergschule Pilgerzell, ventilation work Building automation New building Florenbergschule Pilgerzell, ventilation work G ... More new building Florenbergschule Pilgerzell, ventilation work Building automation New building Florenbergschule Pilgerzell, ventilation work Building automation New building Florenbergschule Pilgerzell, ventilation work Building automation Ventilation work and Ga For the new building of a primary school: - Supply and exhaust air unit (approx. 25,000 M³/h) - Compact unit for scullery - Approx. 50 fire dampers - Approx. 80 variable volume flow controllers - Approx. 300 air outlets - Approx. 2200 M² ventilation duct - Approx. 1800 M spiral-seam duct - Cooling server room - Building automation for ventilation and heating system

Contract notice – General guideline, standard regulation Open procedure (supplies) Rental and maintenance of 92 brand new (1st approval) and networked copying and printing systems with color function for the business area of the Kassel Regional Council (pool contract) The rental ... Additional rental and maintenance of 92 brand new (1st approval) and networked copying and printing systems with color function for the business area of the Kassel Regional Council (pool contract) The rental and maintenance of 92 brand new (1st approval) and networked copying and printing systems with color function (pool contract) for installation at various locations of the Kassel Regional Council. Rental and maintenance of 92 brand new (1st registration) and networked copying and printing systems with color function for the business area of the Kassel Regional Council (pool contract) Rental and maintenance of 92 brand new (1st registration) and networked copying and printing systems with color function. All devices are to be offered by one manufacturer. The machines to be offered must meet the following minimum requirements: - The safety regulations for office workstations in the version valid at the time the offer is submitted. - The generally recognized rules of technology (e.g. DIN 31000, DIN 31001 or equivalent). The provider guarantees that the machines, devices and the like ordered from him comply with the accident prevention regulations (autonomous legal norms) enacted in the Federal Republic of Germany by the statutory accident insurance providers, the occupational health and safety regulations and the generally recognized safety and occupational health rules. - The individual requirements for the devices can be found in Appendix 1 ("druckrpks_anlage 1") - The requirements for the management software can be found in Appendix 2 ("druck- Rpks_anlage 2"). Existing test certificates, clearance certificates and safety data sheets for the machines offered must be enclosed with the offer. In addition, the following applies to all systems: - If systems with a hard drive are requested or supplied, the costs for a security tool for hard drive data overwriting in accordance with ISO 15408 EAL 3 (or equivalent) must be included in the price - User data such as print data/scan data is stored encrypted on the internal hard drive and automatically deleted after the order has been completed - When the device is taken out of service, all data and the configuration are securely deleted (wiped) by the contractor. The client receives written confirmation of the BSI-compliant (or equivalent) deletion. The same applies in the event of a hard drive failure during the contract term - Black and white printing must be pre-set as standard in the driver - Uniform printer driver for all systems - Controllable/configurable user interface presets must be possible - If systems are offered with additional, non-required interfaces and/or modules (e.g. GSM/WLAN/Bluetooth/NFC/USB/etc.), these functions must be deactivated - Management software In addition to Appendix 2, the following applies: Software must be offered that enables administrators to display information on the individual devices using a reporting and management tool (e.g. system information, meter readings, utilization and cost center reports). The software must enable the administration of up to 2000 users. The software update is included in the maintenance. The offer must contain a sufficient number of required licenses (management software, maintenance licenses, printing system licenses, scanning licenses, OCR and the like). The software is to be installed centrally on two redundant server systems (available for fail-safe management) and must enable printing and, at times, scanning (scan-to-mail) at the various locations (keyword: "follow me printing"). There must be cross-location functionality (printing across location boundaries) (all locations are networked with each other). Employees are to be authenticated using a contactless card reader (for existing Legic chips (mim256/mim1024)) on the end device and by entering a PIN. - As part of the initial setup, the contractor must ensure that the setup or basic configuration (network, scan, followme, server) is carried out in accordance with the client's specifications and must also continue to maintain this as part of the maintenance contract. - The device automatically reports fault messages and the need for consumables (toner) - except paper and staples - to the contractor and to a central email address of the client by email, a remote tool, appliance or similar. - Consumables are delivered (Mon.-Fri.) within 2 working days of the order. In addition to the generally automated ordering and delivery, it must be possible to order consumables by phone, email or web interface at no extra cost. - The client ensures that appropriate network connections are available at the locations of the systems for which network integration is planned. He also ensures the necessary server access and support from internal administrators who are familiar with the existing infrastructure. - The contractor undertakes to take back used toner containers, cartridges, waste toner, photoconductors, waste developers, ozone filters and catalysts, etc. in a timely manner and to ensure that they are reused or disposed of properly. The costs are included in the price. The client will be informed by the contractor about the return procedure in an appropriate form. The costs incurred for the return are included in the price. - The contractor undertakes to instruct the staff (multipliers) in the correct use of the systems (application, troubleshooting (replacement of consumables, paper jams)) and to point out the use of the energy-saving functions offered by the system (power management). For this purpose, training is required on site for each organizational unit. - The bidder also provides a short operating manual for each device (pdf). - In addition, the contractor must carry out separate training on the administration and configuration of the systems for the system administrators on site at the Kassel location. - The briefing must take place centrally for each property (at Altes Stadtschloss 1, Zb is one property). For this purpose, several appointments for around 10 people each must be held over two days.

Contract notice – general guidelines, standard rules for open procedures (construction work) Groß-gerau district, new primary school in Worfelden (3-stream) Hermann-Schmitt-Strasse 32, 64572 Büttelborn-Worfelden Interior plastering work Groß-gerau district, new primary school in Worfelden (3-stream) Hermann-Schmitt-Strasse 32, 64572 Büttelborn-Worfelden Interior plastering work Groß-gerau district, new primary school in Worfelden (3-stream) Hermann-Schmitt-Strasse 32, 64572 Büttelborn-Worfelden Execution of interior plastering work, consisting of preparation, interior plastering and hourly wage work for a 3-stream, two-storey primary school, consisting of 5 buildings and a connecting access corridor (“Schulstrasse”).

Contract notice – general guideline, standard arrangements negotiated procedure with prior publication of a call for competition/negotiated procedure (services) Tnw_hls_sankt Vincenzstift Ggmbh_renovation of the indoor swimming pool at the Vincenzschule in Rüdesheim am Rhein. The Sankt Vincenzstift Ggmbh is planning the energy-efficient renovation of the swimming pool at the Vincenzschule in Rüdesheim ... Moretnw_hls_sankt Vincenzstift Ggmbh_renovation of the indoor swimming pool at the Vincenzschule in Rüdesheim am Rhein. The Sankt Vincenzstift Ggmbh is planning the energy-efficient renovation of the swimming pool at the Vincenzschule in Rüdesheim am Rhein. The subject of the contract are the basic services of service phases 1-9 of the service profile for specialist planning of technical equipment in accordance with Section 55 Paragraph 1 Hoai IVM Annex 15 No. 15.1 in system groups 2, 3, 7 (swimming water technology) and 8 (lph. 4 subject to necessity) as well as the special service of monitoring the elimination of defects within the limitation period. Tnw_hls_sankt Vincenzstift Ggmbh_sanierung Indoor swimming pool of the Vincenzschule in Rüdesheim am Rhein A comprehensive description of the task can be found in the tender documents. Sankt Vincenzstift Ggmbh is planning the energy renovation of the swimming pool of the Vincenzschule Rüdesheim am Rhein, Ot Aulhausen. The renovation concept is to be designed in such a way that the swimming pool will exceed the energy standard Beg 70 Efficiency House and the required 75% minimum quota for renewable energies. In addition, the installation of an ultrafiltration system is intended to reduce the drinking water and heat required to operate the swimming pools. The aim of the planned renovation is to: - reduce current energy requirements from 209,000 kWh/year to 52,256 kWh/year (savings of 156,744 kWh/year) - reduce CO2 emissions by 71,444 kg/year (-82%) - reduce primary energy requirements by 75% to 40 kWh/m² per year - maintain water quality without constantly adding disinfectants - greatly reduce the use of chemicals - reduce drinking water requirements The following investment measures in cost groups 300, 400 and 700 are planned to achieve the energy goals: 0. Planning 1. Renovation or new construction of the water treatment system for the swimming pools, taking energy-efficient construction into account (energy and resource savings). 2. Renovation of the pool hydraulics in the swimmers' pool to ensure hygienically perfect flow. 3. Renovation of the therapy pool. 4. Renovation of the side room ventilation taking energy-efficient construction into account (energy saving). 5. Installation of an air and water heat pump (approx. 80kw) for climate-friendly generation of heat to operate the indoor pool and to reduce climate-damaging CO2 emissions. 6. Construction of a photovoltaic system (291kwp) to partially cover the electricity required for indoor pool operation. On the one hand, this system absorbs the additional electricity consumption of the new water technology and, on the other hand, contributes to achieving climate goals by reducing the electricity taken from the grid. 7. Installation of a biogas-powered cogeneration plant (approx. 50kw) to support heating and provide basic supplies for the indoor pool's electrical consumers. 8. Installation of an ultrafiltration system to reduce the drinking water requirement (resource saving) and heat requirement (energy saving) for the operation of the swimming pools (recovery of the process water from the filter rinse water). The project is mainly funded by federal funds, but state funds are also granted. The following timetable is drawn up for the implementation of the measures: In 2025: Start of the project - Preparation of the basic planning: Design, approval and implementation planning for measure 6 (PV system) By August 2025 - Installation of PV system (measure 6) August 2025 to November 2025 - Preparation of the basic planning: Design, approval and implementation planning for measures 1-5 and 7-8 (renovation or new construction of water treatment, renovation of the pool hydraulics of the swimming pool, renovation of the therapy pool, renovation of the side room ventilation, installation of an air-water heat pump, installation of a biogas-powered combined heat and power plant, installation of an ultrafiltration system to reduce water and heat consumption) In 2026: - Preparation of the basic planning: Completion of the implementation planning for measures 1-5 and 7-8 - Planning: Construction management tasks - renovation or new construction of water treatment (measure 1) - Renovation of the pool hydraulics of the swimmers' pool (measure 2) - Renovation of the therapy pool (measure 3) - Renovation of the adjoining room ventilation (measure 4) - Planning: construction management tasks - renovation or new construction of water treatment (measure 1) - Renovation of the pool hydraulics of the swimmers' pool (measure 2) - Renovation of the therapy pool (measure 3) - Renovation of the adjoining room ventilation (measure 4) - Installation of an air-water heat pump (measure 5) - Installation of an ultrafiltration system to reduce water and heat consumption (measure 8) In 2027: - Planning: construction management tasks - renovation or new construction of water treatment (measure 1) - Renovation of the adjoining room ventilation (measure 4) - Installation of a biogas-powered cogeneration plant (measure 7) - Acceptances, checking of last outstanding invoices - Project completion by the end of December 2027 Basic documents have already been prepared and will be made available. The planning services are awarded from phase 1 onwards. The subject of the contract are the basic services of phases 1-9 of the scope of work for specialist planning of technical equipment in accordance with Section 55, Paragraph 1 of the Hoai IVM Annex 15, No. 15.1 in system groups 2, 3, 7 (swimming water technology) and 8 (phase 4 subject to necessity) as well as the special service of monitoring the elimination of defects within the limitation period.

Contract notice – general guidelines, standard rules for open procedures (construction work) Groß-gerau district, new primary school in Worfelden (3-stream) Hermann-Schmitt-Strasse 32, 64572 Büttelborn-Worfelden Interior plastering work Groß-gerau district, new primary school in Worfelden (3-stream) Hermann-Schmitt-Strasse 32, 64572 Büttelborn-Worfelden Interior plastering work Groß-gerau district, new primary school in Worfelden (3-stream) Hermann-Schmitt-Strasse 32, 64572 Büttelborn-Worfelden Execution of interior plastering work, consisting of preparation, interior plastering and hourly wage work for a 3-stream, two-storey primary school, consisting of 5 buildings and a connecting access corridor (“Schulstrasse”).