Tenders of Offizielle Bezeichnung

Contract notice - General guideline, standard rule Open procedure (supplies) Supply of natural gas to 14 delivery points for Bad Soden-Salmünster The scope of delivery includes the supply of 14 delivery points with an annual volume of approx. 11,438,730 kWh of gas for Bad Soden-Salmünster with the magistrate of the city of Bad Soden-Salmünster and the ... MoreThe scope of delivery includes the supply of 14 delivery points with an annual volume of approx. 11,438,730 kWh of gas for Bad Soden-Salmünster with the magistrate of the city of Bad Soden-Salmünster and the Kur- und Freizeit GmbH in the period 01.01.2025 - 31.12.2025. The entry refers to the work prices G_slp with 13 delivery points and G_rlm with 1 delivery point per delivery year in euros/kWh. The entries of separate annual metering and/or billing prices are not planned. The entries of additional charges such as network charges and taxes are not planned - these are not relevant to finding the best bidder. Please refer to the tender documents for all further information.

Contract notice – General guideline, standard regulation Open procedure (supplies) Supply of electricity to 94 delivery points for Bad Soden-Salmünster The scope of supply includes the supply of 94 delivery points with approx. 2,137,936 kWh/a of electricity for Bad Soden-Salmünster with the municipal administration of the city of Bad Soden-Salmünster, the municipal utilities of Bad Soden-Salmünster and the Kur- und Freizeit GmbH. The entry refers to the work prices S_slp with 89 delivery points and S_rlm with 5 delivery points per delivery year in euros/kWh. The entries of separate annual metering and/or billing prices are not planned. The entries of additional charges such as network charges and taxes are not planned - these are not relevant to finding the best bidder. Please refer to the tender documents for all further information.

Contract notice - General guideline, standard rule Open procedure (deliveries) Chassis and fire service superstructure Lot 1: Supply of two 20-cat firefighting vehicles with all-wheel drive including superstructure in accordance with DIN EN 14530-8:2021-01. Firefighting water supply 1,000 liters each. Permissible gross vehicle weight 14,000 kg. Wading ability at least 600 mm. Fire service loading Lot 2: Supply of fire service loading for the two 20-cat firefighting vehicles.

Contract notice - General guideline, standard rule Open procedure (deliveries) Chassis and fire service superstructure Lot 1: Supply of two 20-cat firefighting vehicles with all-wheel drive including superstructure in accordance with DIN EN 14530-8:2021-01. Firefighting water supply 1,000 liters each. Permissible gross vehicle weight 14,000 kg. Wading ability at least 600 mm. Fire service loading Lot 2: Supply of fire service loading for the two 20-cat firefighting vehicles.

Contract notice – general guideline, standard regulation Open procedure (supplies) One-year framework agreement for the supply of printer consumables to the Vitos Group Vitos is the largest provider of treatment for mentally ill people in Hesse. The company operates psychiatric, psychosomatic and forensic-psychiatric clinics as well as psychiatric rehabilitation facilities. The accompanying psychiatric services are aimed at people with chronic mental illnesses. In addition to its core task – the diagnosis and treatment of mentally ill people – Vitos also operates a specialist neurological clinic in Weilmünster, a specialist orthopedic clinic in Kassel as well as youth and disability assistance facilities throughout Hesse. Vitos is a company of the State Welfare Association (LWV) of Hesse. The group of companies with headquarters in Kassel includes 17 non-profit organizations. 11,600 employees generate a total annual income of one billion euros at 115 locations. They treat a total of 44,000 patients on an inpatient/outpatient basis and provide 300,000 outpatient treatments per year. For further information, please visit the Vitos Group website at www.vitos.de. The subject of this tendering procedure is the conclusion of a framework agreement for the supply of printer consumables for the Vitos Group with a term of 12 months from the start of the service. The award of the contract is planned for week 46/2024, and the service will start on December 1, 2024. The eligible companies will be supplied either directly or via the logistics company employed by the group. The framework agreement is limited to a maximum volume of 350,000 euros and ends at the latest after the expiry of the period or early when the maximum volume limit is reached. The client has the right to extend the term of the agreement once by six months under the conditions of the service description. The purpose of this tender is on the one hand to find the most economical toner supplier, and on the other hand to improve the quality of the item masters and standardize the structure. In addition, the targeted specification of alternative toners (rebuild, compatible, etc.) should create the possibility of supplying printers with cheaper consumables. The future supplier found through this tender will therefore first have to supply the item master, which contains both the original products and - where available on the market - corresponding replica products. In addition, the contractor will provide a reference of replica products to the original products in the item master. Binding prices must be given for the inks and toners listed in the appendices. These prices are fixed for the specified term. The future supplier will also supply all other inks and toners in its range as item master data in the defined format, so that the corresponding data is available in the case of a new system in the Vitos system. The items and quantities specified are a review of the consumption of the main items in the previous period (see list of services). Vitos will use these items and quantities to evaluate the offers, but these are not binding purchase quantities. Vitos GmbH is advertising the contract as a public contracting authority in accordance with Section 15 of the Ordinance on the Award of Public Contracts (Public Procurement Ordinance - VGV) by means of an open procedure.

Contract notice - general guideline, standard rule open procedure (construction work) Jahnschule Hünfeld, conversion and modernization - ventilation work The district intends to convert and modernize the Jahnschule Hünfeld. The focus of the measures is the fundamental renewal of the technical building equipment and the internal reorganization of functional areas and usage units. Furthermore, the extension of the building with a single-storey extension and a barrier-free elevator is planned. The entire renovation measure is divided into 4 construction phases. The subject of the service description are the 2nd and 3rd construction phases. Ventilation: 16 pcs. Decentralized classroom ventilation units 1 pc. Central ceiling ventilation unit for the administration area 12 pcs. Fire dampers Approx. 20 m² galvanized sheet metal duct with insulation Approx. 200 m galvanized round ventilation pipe with insulation

Contract notice - General guideline, standard regulation Open procedure (services) Event area cleaning Organisation and implementation of cleaning before, during and after the Hessentag 2025 (from June 13th to June 22nd, 2025) in Bad Vilbel Waste management Organisation and implementation of cleaning before ... Multiorganisation and implementation of cleaning before, during and after the Hessentag 2025 (from June 13th to June 22nd, 2025) in Bad Vilbel Waste management Organisation and implementation of cleaning before, during and after the Hessentag 2025 (from June 13th to June 22nd, 2025) in Bad Vilbel

Contract notice – General Directive, Standard Rules Open procedure (supplies) Framework contract for the supply of prisoner vehicles Minimum order quantity: 16x vehicles Optional order quantity: 10x vehicles

Contract notice - general guideline, standard regulation, open procedure (services) Two-dimensional hydrodynamic modelling for the Lahn river including preparation of the documents for the procedure for designating the floodplain. Execution of the two-dimensional hydrodynamic modelling for the Lahn river in the area from the Hessian state border with North Rhine-Westphalia (km 222) to the Hessian state border with Rhineland-Palatinate (km 56) - including preparation of the documents for the procedure for designating the floodplain. The basis for determining the floodplains is to be a two-dimensional hydrodynamic-numerical 2D HN model. A 2D HN model can be used to record flow parameters such as flow velocity and water level. The model is based on the current DGM1 data from the state of Hesse. In addition, sounding data from the Water and Shipping Administration are available for parts of the Lahn. In addition, wet profiles must be collected using a suitable surveying method to provide a representative representation of the river channel and then intersected with the DGM data. In particular, crossing and cross structures relevant to flow must be taken into account in the survey. The model should be able to fully depict the urban areas in the catchment area that are flooded, as well as those in the open countryside. In the middle and upper reaches up to Wetzlar at Hqextrem, the Lahn has a floodplain with widths of up to approx. 2,000 m. In this regard, an average width of approx. 1,000 m with a river length of approx. 166 km and thus a model area of around 166 km² must be covered. The calculation program must be able to reliably depict different discharge conditions with the resulting different spread areas. The boundary conditions required for the calculation are defined in consultation with the client. Time-independent (stationary) flow conditions are planned for the modeling. To assess the sensitivity, a scenario with varying roughness in the vicinity of selected residential areas is to be used. In an alternative scenario, the flood areas for flood waves are to be determined using stationary calculations, taking into account the retention effect of the existing flood retention basins on the tributaries of the Perf, Ohm, Salzböde, Lumda, Kleebach and Ulmbach. The model is to be calibrated using existing hydrological data and, if necessary, past historical flood events. When obtaining data in this regard (photo documentation, water level fixations, etc.), reference must be made to documents held by the Giessen Regional Council - hereinafter referred to as the client (ag). The boundary conditions required for the calculation are defined in consultation with the client. The results of the calculations are used to create the hazard and risk maps in accordance with Section 74 of the Water Resources Act in the Lahn risk area and to create the flood plain maps in accordance with Section 76 of the Water Resources Act.

Contract notice - general guideline, standard regulation negotiated procedure with prior publication of a call for competition/negotiated procedure (services) specialist planning structural planning Basis of the service to be provided: specialist planning service structural planning: basic services of service phases 1-6 in accordance with Section 51 Hoai IVM Annex 14 No. 14.1 Hoai specified and supplemented by the ... Additional basis of the service to be provided: specialist planning service structural planning: basic services of service phases 1-6 in accordance with Section 51 Hoai IVM Annex 14 No. 14.1 Hoai specified and supplemented by the service profile of the Office for Construction and Real Estate as well as additional special services object planning Ing.bw (technical development) Basis of the service to be provided: object planning civil engineering structures: basic services of service phases 1-9 in accordance with Section 43 Hoai IVM Annex 12 No. 12.2 Hoai specified and supplemented by the service profile of the Office for Construction And real estate as well as plus special services Specialist planning (preventive) fire protection Basis of the service to be provided: -Specialist planning (preventive) fire protection: Standard services in accordance with Aho No. 17 Fire protection service profile December 2022 In service phases 1-5 and 8 Specified and supplemented by the service profile of the Office for Construction and Real Estate as well as plus special services