Tenders of Offizielle Bezeichnung

Contract notice - General guideline, standard regulation Open procedure (services) Engineering service_canal renewal_in the test item Engineering service in accordance with Section 43 Hoai performance phases 1- 3 and 5 - 8 special and additional services Engineering service_canal renewal_in the test item ... Multi-engineering service_canal renewal_in the test item Engineering service in accordance with Section 43 Hoai performance phases 1- 3 and 5 - 8 special and additional services Engineering service_canal renewal_in the test item Engineering service in accordance with Section 43 Hoai performance phases 1- 3 and 5 - 8 special and additional services

Contract notice – general guideline, standard regulation Open procedure (services) Framework agreement for catering service in the Hessian deportation detention facility Framework agreement on the catering service for up to 80 prisoners in the deportation detention facility operated by the PP South Hesse ... Multi-framework agreement for catering service in the Hessian deportation detention facility Framework agreement on the catering service for up to 80 prisoners in the deportation detention facility operated by the PP South Hesse in 2025 onwards. Framework agreement for catering service in the Hessian deportation detention facility The subject of the framework agreement is the catering service with breakfast, lunch, dinner and drinks for up to 80 people accommodated in the Hessian deportation facility (AHE). It is intended to conclude a framework agreement for this. The catering service provider must adhere to the HACCP principles. There is no company kitchen. The meals are produced and put together by a catering service provider in a production kitchen outside the AHE. The meals are served to those accommodated by Ahe employees. Daily deliveries - 365 days a year - take place at around 11:00 a.m. Thermo-boxes are to be used for transport, which are provided by the contractor. Together with lunch for the current day, the components for that day's dinner and for breakfast the following day are also provided. Before delivery, the contractor must prepare a menu that meets the recommendations of the German Nutrition Society (DGE). The contractor must make the menu available to the client at least 2 weeks in advance. The client usually orders the contractor by e-mail the day before, but no later than 8:00 a.m. on the day of delivery. The service will begin on June 1, 2025. This is a framework agreement which ends on May 31, 2029 at the latest or when the maximum number of 116,800 catering units is reached (365 days x 80 prisoners (maximum occupancy) x 4 years); in these cases the framework agreement loses its effect. Since the AHE is not always fully occupied and the maximum occupancy is 80 prison places, the corresponding catering quantity (see tiered prices in the list of services) will be communicated to the contractor. The contractor must keep the required capacities free. Billing is based on the actual quantity of catering units purchased and the corresponding tiered price from the list of services.

Contract notice – Sector Directive, standard regulation negotiated procedure with prior publication of a call for competition/negotiated procedure (construction work) Fully automatic crane system for biomass (waste wood AI to AIIII) at the district heating power plant in Kassel The municipal works energy + heat GmbH (EWG) plans, builds and operates the district heating network as well as generation ... More fully automatic crane system for biomass (waste wood AI to AIIII) at the district heating power plant in Kassel The municipal works energy + heat GmbH (EWG) plans, builds and operates the district heating network as well as generation plants in the city of Kassel. The distribution of district heating is the responsibility of the parent company Städtische Werke AG (STW). The district heating network, with a route length of around 182 km and a connected load of 447 MW, currently covers around 21% of the heat demand in the city of Kassel. The Ewg and Stw have set themselves the goal of specifically expanding the district heating supply through expansion and densification and of decarbonising the piped heat supply in the supply area by 2045 at the latest. A relevant and very timely step in this direction is the phase-out of coal in the district heating power plant. This will replace the energy source brown coal with sewage sludge and waste wood (ai to Aiii). The Ewg has been operating a district heating power plant at the Dennhäuser Strasse site in Kassel since 1988, which generates an electrical output of around 40 MW with a maximum firing thermal output of 150 MW. In addition, up to 80 MW can be supplied to the municipal district heating network as thermal output. The power plant boiler is operated with a circulating fluidized bed combustion system. The fuels currently used include brown coal, hard brown coal and dried and dewatered municipal sewage sludge. The fluidized bed boiler, which is operated in natural circulation, generates up to 180 t/h of fresh steam at 74 bar and 503 °C. The EWG plans to use sewage sludge and waste wood of classes Ai to Aiii for energy generation in the future. The combustion of waste wood results in changed requirements for the system technology of the district heating power plant, for which corresponding construction measures must be planned and carried out. One of the construction measures is the construction of storage and transport facilities for supplying the existing fluidized bed boiler with biomass (waste wood). The fully automatic crane system described here is to be installed in a new, closed fuel storage hall (waste wood bunker) to be built by the EWG. A tipping bunker located in the waste wood bunker takes in the waste wood delivered by truck, and the grab crane stores and mixes the waste wood fully automatically. The crane system feeds the fuel in the waste wood bunker via traction floors installed there to the fuel conveyor line to the existing power plant building, Block 2. In Phase 1 (from September 2026), the fluidized bed combustion system will be operated after commissioning with the new fuel supply for waste wood, initially together with the previous fuels coal and sewage sludge. After further adjustments to the waste wood conveyor technology in Phase 2 (from September 2027), the fuel supply to the fluidized bed boiler will then be based entirely on the fuels waste wood and sewage sludge. If the contract is awarded by July 1, 2025, the fully automatic crane system described in this specification will be implemented by the contractor during the summer shutdown in 2026. The subject of this tendering procedure is all necessary planning and engineering services, all required machine and component deliveries, assembly and commissioning of the mechanical equipment for the fully automatic crane system. Further details and the specific services can be found in particular in the technical specification with attachments (appendix 1). With this Europe-wide tendering procedure, the EEC wants to select a reliable, efficient and qualified company that will carry out the necessary planning and construction services in accordance with the specifications of the tender documents in good time by November 13, 2026. Fully automatic crane system for biomass (waste wood AI to AIIII) at the Kassel district heating power plant. The subject of this tendering procedure is all necessary planning and engineering services, all required machine and component deliveries, assembly and commissioning of the mechanical equipment for the fully automatic crane system. Further details and concrete services can be found in particular in the technical specification with attachments (Appendix 1 of the tender documents).

Contract notice - General guideline, standard regulation Open procedure (construction work) Swim outdoor pool Schlüchtern Construction of a basement in monolithic construction. Swim renovation and replacement construction of leisure pool Schlüchtern, shell construction lot 2 Construction of a technical basement ... Mehrswim outdoor pool Schlüchtern Construction of a basement in monolithic construction. Swim renovation and replacement construction of leisure pool Schlüchtern, shell construction lot 2 Construction of a technical basement in monolithic construction. Equipping and setting up the construction site. Construction of the base plate in the excavation pit created by the customer. Installation quantities: Structural steel - approx. 85 tonnes Building length approx. 45m Building width approx. 12.5m

Contract notice – general guidelines, standard rules, open procedure (construction work) Renovation and extension of the Beuerbach sewage treatment plant – Lot 2.01 Conversion of the primary clarifier – plant and mechanical engineering with metalworking Renovation and extension of the Beuerbach sewage treatment plant – Lot 2.01 Conversion of the ... Renovation and extension of the Beuerbach sewage treatment plant – Lot 2.01 Conversion of the primary clarifier – plant and mechanical engineering with metalworking Renovation and extension of the Beuerbach sewage treatment plant – Lot 2.01 Conversion of the primary clarifier – plant and mechanical engineering with metalworking Renovation and extension of the Beuerbach sewage treatment plant – Lot 2.01 Conversion of the primary clarifier – plant and mechanical engineering with metalworking The following plant components are to be converted/rebuilt for the renovation and upgrading of the Beuerbach sewage treatment plant: ? Conversion of the two primary clarifiers and new equipment for the smaller primary clarifiers ? New construction of a workshop building ? New construction of a coagulant storage and dosing station ? The combination tank (biology and secondary clarification) in need of renovation will be partially demolished. An additional secondary clarification tank will be built in its place. ? The biology will be expanded with another tank, similar to biology II/III. Cascade denitrification will be implemented using three identical tank volumes (cascades) ? Conversion work on the existing biology and the existing secondary clarification tank ? E+MSR for all trades ? Concrete renovation of various structures (primary clarification tank, stair tower digester, etc.) ? Renovation and conversion of the company building ? Renovation and optimization of the technical equipment for sludge treatment ? Renovation and optimization of the heat supply - Equipping 2 primary clarifiers with belt scrapers - Equipping the pump room of the primary clarifiers with 8 pumping stations - Equipping the digester, sludge and grease storage tanks - Equipping the workshop building - Crane system - Approx. 340 m of piping V4a Dn 25 - Dn 500 with fittings, connections and brackets - Approx. 88 m of stainless steel railings with built-in parts - Exit ladders and steel stairs made of stainless steel V4a - Approx. 100 m² of grating cover with substructures in stainless steel V4a

Contract notice - General guideline, standard regulation Open procedure (construction work) Drywall work Drywall work Drywall work Conversion and renovation of the Bad Camberg outdoor swimming pool: Main volumes of drywall work: - Suspended wooden slatted ceiling approx. 500 m² - Fleece 500 m² - Grid ceiling ... More drywall work Drywall work Drywall work Conversion and renovation of the Bad Camberg outdoor swimming pool: Main volumes of drywall work: - Suspended wooden slatted ceiling approx. 500 m² - Fleece 500 m² - Grid ceiling mineral fiber approx. 170 m² - Acoustic plaster ceiling approx. 70 m² - Plasterboard for suspended ceilings approx. 40 m² - approx. 15 inspection hatches - Single stud walls approx. 60 m² - Double stud walls approx. 10 m² - 50 MU/a steel profiles - Facing panels approx. 150 m² - Interior doors approx. 15 pieces

Contract notice - general guideline, standard regulation negotiated procedure with prior publication of a call for competition / negotiated procedure (services) Planning services for the new fire station in Frankenhain The subject of this tender is the planning services for the new fire station in Frankenhain. For this, the following services are required: Lot 1: Object planning for buildings and outdoor facilities Lot 2: Structural planning Lot 3: Technical equipment Hls Lot 4: Technical equipment Elt Lot 1 - Object planning for buildings and outdoor facilities The subject of this contract is services in the scope of services for building planning in accordance with the scope of services in Sections 33 ff. Hoai of the Hoai 2021, for the new fire station in Frankenhain and the outdoor facility planning required for the fire station in Sections 38 ff. Hoai. For the client's objectives at the time the contract is concluded (planning and monitoring objectives within the meaning of Section 650p Paragraph 2 of the German Civil Code), the following minimum requirements are defined - in the sense of a work contract quality agreement: The room program and all legal and technical requirements are described in detail in Appendix 12 to the contract notice and are the subject of this letter of invitation. In terms of energy, the new fire station is to be planned and constructed as a climate-friendly non-residential building (kfn) that meets the requirements of an efficiency building 40. Furthermore, the regulations for non-residential buildings run by the public sector must generally be observed and adhered to in accordance with the Building Energy Act (geg) and the Renewable Energies Heat Act (eewärmeg). The other requirements are set out in Appendix 12 to the contract notice. The scope of services commissioned is, as detailed in the draft contract, the provision of planning services in service phases 1 to 9, which are to be assigned to the service profile for building object planning (Section 34 Hoai in conjunction with Appendix 10 to Section 34 Paragraph 4 Hoai). Furthermore, it is intended to commission the special services evident from the service description in Appendix 12. The subject matter of the contract also includes the necessary outdoor area planning services in accordance with Section 39 Paragraph 3 Hoai service phases 1-9, whereby the client views these as services “to be provided” by the object planner. These services will be commissioned in stages, as described above, with the first stage comprising service phases 1-4. The object planning and the associated outdoor area planning will be put out to tender in order to obtain a uniform planning concept from a single source. The contracting authority is conducting an EU-wide tendering procedure due to the relevant threshold being reached/exceeded when all estimated contract volumes are added together. In parallel with this lot, the lots for engineering services for structural planning and technical equipment are being put out to tender. The client has the following requirements in terms of time for the construction process: The basic services up to service phase 4 are to be provided by September 2025. Construction is scheduled to begin in March/April 2026. Commissioning is planned for the end of 2026/beginning of 2027. Due to the unpredictable duration of the approval process by the lower building supervisory authorities, these are only provisionally accepted framework data. Lot 2 - structural planning, thermal insulation and energy balancing The subject of this contract are services in the structural planning scope of services in accordance with Sections 49 ff. Hoai as well as thermal insulation and energy balancing for the planning and implementation of the new construction of a fire station in Frankenhain. The following minimum requirements are defined as the client's objectives at the time the contract is concluded (planning and monitoring objectives within the meaning of Section 650p Paragraph 2 of the German Civil Code) - in the sense of a work contract quality agreement: A. Spatial program The client has described the requirements for the service in detail in the service description Annex 12 to the contract notice in the EU Official Journal. These requirements become part of the contract to be concluded. B. Technical aspects: In addition to the requirements according to Annex 12, the regulations for non-residential buildings in the public sector according to the Building Energy Act (GEG) and the Renewable Energies Heat Act (EEWÄHEITG) must generally be observed and complied with. The scope of services commissioned is, as detailed in the draft contract, the provision of planning services for service phases 1 to 6 and the special services for service phase 8 that are to be assigned to the structural planning service profile (Section 51 HOAI in conjunction with Annex 14 to Section 51 Paragraph 1 HOAI). The order is placed in performance stages. The awarding authority carries out an EU-wide tendering procedure if the relevant threshold value is reached/exceeded when all estimated order volumes are added together. The individual planning services are awarded in lots. The lots for object planning for buildings and outdoor facilities and the engineering services for the technical equipment are also put out to tender together with this lot. The client has the following requirements in terms of time for the construction process: - The basic services for service phases 1 to 4 are to be fully provided by September 2025 in coordination with the object planner. - Construction is scheduled to begin in March/April 2026. - The planned commissioning is to take place at the end of 2026/beginning of 2027. Lot 3 - Hls technical equipment The subject of this contract are services of the building scope of work in accordance with Sections 53 ff. Hoai system groups 1, 2 and 3 (lot 3 - Hls), for the construction of a fire station in Frankenhain. The following minimum requirements are defined as the client's objectives at the time the contract is concluded (planning and monitoring objectives within the meaning of Section 650p Paragraph 2 Bgb) - in the sense of a work contract quality agreement: A. Room program The client has defined the room program and all requirements for the execution in the service description Appendix 12 to the contract notice. This becomes part of the contract. B. Technical aspects: The regulations for non-residential buildings in the public sector must also be observed and obtained in accordance with the Building Energy Act (GEG) and the Renewable Energies Heat Act (EEWÄHERG). The commissioned scope of services is, according to the detailed provisions of the draft contract, the provision of planning services for service phases 1 to 9, which are to be assigned to the service profile technical equipment system groups 1, 2 and 3 (lot 3 - Hls) (Section 55 Paragraph 1 Hoai in conjunction with Appendix 15 to Section 55 Paragraph 1 Hoai). The order is placed in service stages. Initially, only the basic services for service phases 1 to 4 are commissioned. The client can commission the following basic services for service phases 5, 6, 7, 8 and 9 - in whole or in part - in one or more further service stages by means of a written declaration to the contractor. The contractor has no legal right to be commissioned with further services beyond the scope of services commissioned according to the draft contract. The individual planning services are awarded in lots. Parallel to this lot, tenders are being put out for the lots object planning buildings and outdoor facilities (lot 1), engineering services for structural planning (lot 2), and engineering services for technical equipment Elt (lot 4). The client has the following requirements in terms of time for the construction process: - The basic services for service phases 1 to 4 are to be fully provided in September 2025. The services must be coordinated with the object planner. - Construction is scheduled to start in March/April 2026; - Construction is scheduled to end in 2026/beginning of 2027. Lot 4 - Elt technical equipment The subject of this contract are services from the building service scope in accordance with Sections 53 ff. Hoai system groups 4 and 5 (lot 4 - Elt), for the construction of a fire station in Frankenhain. The following minimum requirements are defined as the client's objectives at the time the contract is concluded (planning and monitoring objectives within the meaning of Section 650p Paragraph 2 of the German Civil Code) - in the sense of a work contract quality agreement: A. Room program The client has defined the room program and all requirements for the execution in the service description Appendix 12 to the contract notice. This becomes part of the contract. B. Technical aspects: The regulations for non-residential buildings in the public sector must generally also be observed and obtained in accordance with the Building Energy Act (GEG) and the Renewable Energies Heat Act (EEWÄHEITG). The commissioned scope of services is, as detailed in the draft contract, the provision of planning services for service phases 1 to 9, which are to be assigned to the service profile for technical equipment, system groups 4 and 5 (lot 4 - Elt) (Section 55 Paragraph 1 Hoai in conjunction with Appendix 15 to Section 55 Paragraph 1 Hoai). The order is placed in service stages. Initially, only the basic services of service phases 1 to 4 are commissioned. The client can commission the following basic services of service phases 5, 6, 7, 8 and 9 - in whole or in part - in one or more further service levels by making a written declaration to the contractor. The contractor has no legal right to be commissioned with further services beyond the scope of services commissioned according to the draft contract. The individual planning services are awarded in lots. In parallel to this lot, tenders are issued for the lots object planning buildings and outdoor facilities (lot 1), engineering services for structural planning (lot 2), engineering services for technical equipment Hls (lot 3). For the construction process, the client sets the following requirements in terms of time: - The basic services of service phases 1 to 4 are to be fully provided in 09/2025. The services must be coordinated with the object planner. - The planned start of construction is March/April 2026; - The planned completion of construction is to take place at the end of 2026/beginning of 2027.

Contract notice – general guideline, standard regulation negotiated procedure with prior publication of a call for competition/negotiated procedure (services) Grs Großen - Buseck - specialist planning HLS for the extension and partial extension Specialist planning technical equipment HLS, Section 53 Para. 2 No. 1, 2, 3, Section 55 Hoai, for the extension and extension of the Goethe ... Moregrs Großen - Buseck - specialist planning HLS for the extension and partial extension Specialist planning technical equipment HLS, Section 53 Para. 2 No. 1, 2, 3, Section 55 Hoai, for the extension and extension of the Goethe School in Großen-Buseck Grs Großen - Buseck - specialist planning HLS for the extension and partial extension The district of Giessen is planning to expand the additional space required for the elementary school in Großen-Buseck by adding an extension. The listed old building (Wilhelmstr. 11) of the property was inaugurated in January 1922. The newer school building, House B (Wilhelmstr. 14) was inaugurated in 1956 and a side wing was added in 1994. In 2017, Building B was extended to include a single-storey cafeteria extension made of wood. The extension is intended to reflect the planned functional units in a coherent building structure. The existing building is to be extended in part. The design is intended to take up the access to the school, and the main access is to be supplemented with an elevator if possible in order to increase accessibility. Preliminary planning has already taken place in-house. The total size of the non-binding preliminary design is approximately 670 m2 Bgf.

Contract notice - general guideline, standard regulation negotiated procedure with prior publication of a call for competition / negotiated procedure (supplies) Framework agreement on the provision, implementation and operation of a patient portal The subject of the tender is the award of a framework agreement on the provision, implementation ... Multi-framework agreement on the provision, implementation and operation of a patient portal The subject of the tender is the award of a framework agreement on the provision, implementation and operation of a patient portal including services for the two locations of the University Hospital Giessen and Marburg GmbH ("ukgm"). Background to the joint procurement The aim is to make the structure and use of the portals efficient in a joint approach. The aim is to introduce a centrally operated, multi-client and interoperable patient portal for digital admission and treatment management for the client's data management at both locations. For this purpose, a framework agreement is to be concluded with a contractual partner as the contractor in accordance with Section 21 Paragraphs 2 and 3 of the Vgv. The specific services are called up individually by both locations based on the location-specific project planning there (individual call-up). Further details and specifications on the subject matter of the service can be found in the "requirements and criteria catalog" and the service description. The framework agreement does not give the contractor any right to call up a specific quantity. It is planned to procure services for the provision, implementation and operation of a patient portal for the two clinic locations in Gießen and Marburg and, if necessary, for one or more of the MVZs connected to them by means of individual calls. A binding maximum purchase limit of 10 individual calls applies. Framework agreement on the provision, implementation and operation of a patient portal for the implementation of the procurement project, the client intends to use not only its own funds but also state grants in accordance with the so-called "KHZG funding guideline", i.e. the "guideline for the funding of projects for the digitalization of processes and structures during a hospital stay of patients in accordance with Section 21 Paragraph 2 of the KHSfV" in the currently valid version. It is therefore necessary to comply with the relevant provisions and specifications of this KHZG funding guideline in the event of the contract being awarded. Against this background, the functionalities of the patient portal must mandatorily and verifiably fulfill: - the must-have criteria according to section 4.3.2 of the Og KHZG funding guideline and - the overarching technical and interoperability standards according to sections 4.2.1 and 4.2.2 of the Og KHZG funding guideline. Furthermore, the patient portal must offer the option of fulfilling the optional criteria according to section 4.3.2 of the Og KHZG funding guideline, which must be implemented by the client as per the service description. The contractor's contractual service obligations include, among other things, the following tasks for each location: - provision of a central, multi-client and interoperable patient portal in accordance with the technical, organizational and structural requirements, - integration and implementation of a central, multi-client and interoperable patient portal and in particular the realization of interfaces to the existing systems, - training services, - support services in the sense of project management and - operational and service services. All services are to be provided by the contractor while ensuring uninterrupted clinic operations and always in close coordination with the client's responsible contacts at the respective location. The contractor must work to reduce the scope of coordination and the effort required for interface implementation as much as possible and to introduce the portal in accordance with defined milestones. To this end, the contractor must develop a process and implementation standard immediately after the order is placed.

Contract notice – General guideline, standard rule, open procedure (construction work) Veste Otzberg – heating systems and central water heating systems, standard buildings, heating systems and central water heating systems (DIN 18 380); Veste Otzberg – heating systems and central water heating ... Moreveste Otzberg – heating systems and central water heating systems, standard buildings, heating systems and central water heating systems (DIN 18 380); Veste Otzberg - Heating systems and central water heating systems Standard buildings 1. Heating and central water heating systems according to DIN 18 380 1 piece of central operating technology Approx. 32 pieces of radiators Approx. 12 m2 of underfloor heating Approx. 190 linear metres of pipes made of carbon steel D 15-35 Approx. 110 linear metres of pipes made of metal composite pipes D 16-25 2. Air conditioning systems according to DIN 18 379 1 piece of kitchen exhaust fan, 2,600 m3/h 1 piece of radial pipe fan, up to 300 m3/h 3 pieces of single-pipe single-room fans, up to 60 m3/h 1 piece of exhaust air tower for outdoor installation 1 piece of kitchen intake hood Approx. 18 m2 of ventilation ducts Approx. 32 linear metres of ventilation pipes Dn 80-355 Approx. 3 pieces Sewer/air pipe fittings Approx. 2 air outlets 3. Gas, water and waste water installation systems in accordance with DIN 18 381 Approx. 85 linear metres of waste water pipes made of plastic Dn 50-110 Approx. 140 linear metres of drinking water pipes made of metal composite pipe D 15-32 Approx. 24 pieces of furnishings and accessories Approx. 23 pieces of assembly elements for lightweight walls