Municipality Of Sibonga, Cebu Tender

Description The Municipality Of Sibonga Through The General Fund Fy 2024 Intends To Apply The Sum Of Two Hundred Twenty-five Million Pesos Only (225,000,000.00), Construction/expansion Of Sibonga Water System (level Iii) In Barangay Lamacan, Poblacion, Lindogon, Simala, Sabang, Guimbangco-an, Candaguit, Abugon, Mangyan, Tubod, Bahay, Bagacay & Magcagong, Sibonga, Cebu, Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Each Lot. Bid Received In Excess Of The Abc For Each Lot Shall Be Automatically Rejected At Bid Opening. Work Description Quantity Unit 1. General Requirements 1.1. Mobilization/demobilization 1 Unit 1.2. Contractors Field Office 20 Months 1.3. Signages & Barricades 1 Unit 1.4. Material Testing 1 Unit 1.5. Permits & Clearance (nwrb, Ecc & Dpwh Permits) 1 Unit 1.6. Project Billboards 2 Units 1.7. Construction Health & Safety 20 Months 2. Source Development 2.1. System 1 Spring Development (lamacan) 1 Lot 2.2. System 2 (well Drilling Including Submersible Pump At Simala) 1 Lot 2.3. System 4 (well Drilling Including Submersible Pump At Abugon) 1 Lot 2.4. System 4 (well Drilling Including Submersible Pump At Sabang) 1 Lot 2.5. System 5 (well Drilling Including Submersible Pump At Bagacay) 1 Lot 2.6. System 5 (well Drilling Including Submersible Pump At Bahay) 1 Lot 3. Construction Pipes 3.1. System 1: Pipe Laying/jointing 3.1.1. Hardrock Excavation 4,364 Cu.m 3.1.2. Sand Bedding 138 Cu.m 3.1.3. 8” Pe Pipe Sdr 13.6 4,021.65 Lm 3.1.4. 6” Pe Pipe Sdr 13.6 273.54 Lm 3.1.5. 4” Pe Pipe Sdr 13.6 2,761.74 Lm 3.1.6. 3” Pe Pipe Sdr 17 4,338.11 Lm 3.1.7. 2” Pe Pipe Sdr 17 7,207.7 Lm 3.1.8. Pipe Fittings 82 Units 3.1.9. Thrust Block 5 Cu.m 3.1.10. Disinfection 18,603 Lm 3.1.11. Backfilling 3,077 Cu.m 3.1.12. Hydrotesting 18,603 Lm 3.1.13. Transporting/disposing Of Unused Materials 1,287 Cu.m 3.2. System 2: Pipe Laying/jointing 3.2.1. Hardrock Excavation 2,402 Cu.m 3.2.2. Sand Bedding 77 Cu.m 3.2.3. 6” Pe Pipe Sdr 13.6 2,918.37 Lm 3.2.4. 4” Pe Pipe Sdr 13.6 984.33 Lm 3.2.5. 3” Pe Pipe Sdr 17 5,787.26 Lm 3.2.6. 2” Pe Pipe Sdr 17 702.27 Lm 3.2.7. Pipe Fittings 24 Unit 3.2.8. Thrust Block 3 Cu.m 3.2.9. Disinfection 10,393 Lm 3.2.10. Backfilling 1,703 Cu.m 3.2.11. Hydrotesting 10,393 Cu.m 3.2.12. Transporting/disposing Of Unused Materials 699 Cu.m 3.3. System 4: Pipe Laying/jointing 3.3.1. Hardrock Excavation 6,020 Cu.m 3.3.2. Sand Bedding 163 Cu.m 3.3.3. 8” Pe Pipe Sdr 13.6 1,745.31 Lm 3.3.4. 6” Pe Pipe Sdr 13.6 7,941.85 Lm 3.3.5. 4” Pe Pipe Sdr 13.6 3,536.96 Lm 3.3.6. 3” Pe Pipe Sdr 17 3,914.56 Lm 3.3.7. 2” Pe Pipe Sdr 17 1,369.37 Lm 3.3.8. Pipe Fittings 81 Units 3.3.9. Thrust Block 5 Cu.m 3.3.10. Disinfection 18,509 Lm 3.3.11. Backfilling 4,267 Cu.m 3.1.12. Hydrotesting 18,509 Lm 3.1.13. Transporting/disposing Of Unused Materials 1,987 Cu.m 3.4. System 5: Pipe Laying/jointing 3.4.1. Hardrock Excavation 8,998 Cu.m 3.4.2. Sand Bedding 240 Cu.m 3.4.3. 6” Pe Pipe Sdr 13.6 13,745.34 Lm 3.4.4. 4” Pe Pipe Sdr 13.6 7,287.47 Lm 3.4.5. 3” Pe Pipe Sdr 17 3,303.80 Lm 3.4.6. 2” Pe Pipe Sdr 17 2,774.65 Lm 3.4.7. Pipe Fittings 49 Unit 3.4.8. Thrust Block 7 Cu.m 3.4.9. Disinfection 27,112 Lm 3.4.10. Backfilling 6,466 Cu.m 3.4.11. Hydrotesting 27,112 Cu.m 3.4.12. Transporting/disposing Of Unused Materials 2,532 Cu.m 4. Assemblies 4.1. Stub-out 4.1.1. System 1 A. 25mm Dia. 3 Set B. 50mm Dia. 8 Set 4.1.2. System 2 A. 25mm Dia. 3 Set B. 50mm Dia. 5 Set 4.1.3. System 4 A. 25mm Dia. 5 Set B. 50mm Dia. 8 Set 4.1.4. System 5 A. 25mm Dia. 3 Set B. 50mm Dia. 8 Set 4.2. 25mm Air Release Valve 4.2.1. System 1 2 Set 4.2.2. System 2 2 Set 4.2.3. System 4 8 Set 4.2.4. System 5 3 Set 4.3. Blow-off 4.3.1. System 1 150mm Dia. 1 Set 4.3.2 System 2 100mm Dia. 2 Set 75mm Dia. 3 Set 4.3.3 System 4 200mm Dia. 1 Set 150mm Dia. 2 Set 50mm Dia. 3 Set 4.3.4 System 5 150mm Dia. 2 Set 100mm Dia. 2 Set 75mm Dia. 2 Set 50mm Dia. 2 Set 4.4. Fire Hydrant 4.4.1. System 1 1 Set 4.4.2. System 2 1 Set 4.4.3. System 5 1 Set 4.5. Flow Meter / Discharge Assembly 4.5.1. System 1 1 Set 4.5.2. System 2 1 Set 4.5.3. System 4 2 Set 4.5.4. System 5 2 Set 5. Concrete Works 5.1. Reservoir 5.1.1. System 1 200 Cubic Meters 200 Cu.m 5.1.2. System 2 150 Cubic Meters 150 Cu.m 5.1.3. System 4 250 Cubic Meters 250 Cu.m 50 Cubic Meters 50 Cu.m 5.1.4. System 5 250 Cubic Meters 270 Cu.m 50 Cubic Meters 50 Cu.m 5.2. Chlorinator House Incl. Equipment 5.2.1. System 1 1 Set 5.2.2. System 2 1 Set 5.2.3. System 4 1 Set 5.2.4. System 5 1 Set 5.3. Pump Control House 5.3.1. System 2 1 Set 5.3.2. System 4 2 Set 5.3.3. System 5 2 Set 5.4. Demolition And Restoration Of Pavement 5.4.1. System 1 1 Set 5.4.2. System 2 1 Set 5.4.3. System 4 1 Set 5.4.4. System 5 1 Set 6. Power Supply; Transformer With Complete Accessories 6.1. System 2 1 Lot 6.2. System 4 2 Lot 6.3. System 5 2 Lot The Municipality Of Sibonga Now Invites Bids For The Abovementioned Procurement Project. Completion Of The Works Is Required Within Six Hundred (600) Calendar Days. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Interested Bidders May Obtain Further Information From The Municipality Of Sibonga And Inspect The Bidding Documents Or One May Call The Secretariat At (032) 486-0551 From Monday To Friday 8:00 A.m To 5:00 P.m. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On April 24 – May 21, 2024 At Municipality Of Sibonga, Poblacion, Sibonga, Cebu And Upon Payment Of A Nonrefundable Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb In The Amount Of Php. 50,000.00 To The Municipal Treasurer’s Office. The Municipality Of Sibonga Will Hold A Pre-bid Conference On May 7, 2024 (10:00 A.m) At Multi-purpose Building, Bac Office, Poblacion, Sibonga, Cebu Which Shall Be Open To Prospective. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Municipality Of Sibonga, Multi-purpose Building, Bac Office, Poblacion, Sibonga, Cebu On Or Before May 21, 2024 (10:00 A.m). Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. Bid Opening Shall Be On May 21, 2024 (10:00 A.m) At Multipurpose Building, Bac Office, Poblacion, Sibonga, Cebu. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. The Municipality Of Sibonga Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Date Of Posting: April 24 – May 21, 2024 Sgd. Edna Lorna C. Otero Www.philgeps.gov.ph Chairperson