Municipality Of Glan, Sarangani Province Tender

Description 100-2024-02- 0359 Supply And Delivery Of Various Laboratory Equipment To Be Used By The Students For Bachelor Of Science In Civil Engineering Program Of Glan Institute Of Technology, Brgy. Calabanit, Glan, Sarangani Province Specifications: 1 Set Hydraulic Bench Apparatus Specifications: *basic Unit For Supplying Experimental Units In Fluid Mechanics * Closed Water Circuit With Storage Tank, Pump And Measuring Tank * Measuring Tank Divided In Two For Volumetric Flow Rate Measurements * Measuring Beaker With Scale For Very Small Volumetric Flow Rates * Measurement Of Volumetric Flow Rates By Using A Stopwatch * Work Surface With Integrated Flume For Experiments With Weirs * Work Surface With Inside Edge For Safe Placement Of The Accessory And For Collecting The Dripping Water * Storage Tank, Measuring Tank And Work Surface Made Of Grp. Technical Data Centrifugal Pump Power Consumption: 500~746w Maximum Flow Rate: More Than 100l/min Maximum Head: 32m Storage Tank Capacity: 175l Measuring Tank At Large Volumetric Flow Rates: 40l At Small Volumetric Flow Rates: 7l Flume Lxwxh: 510x165x170mm Measuring Beaker With Scale For Very Small Volumetric Flow Rates Content: 5l Stopwatch Measuring Range: 0...9h 59min 59sec Scope Of Delivery 1 Stop Watch 1 Measuring Beaker 1 Instruction Manual 1 Base Module (hydraulic Bench) 1 Set Flow Over Weirs Specifications: *self-sealing Weir Panels, Manufactured From Stainless Steel *level Gauge To Determine The Weir Head *thomson Weir With Notch 90° And 30° Rectangular Weir Notch Wxh 50x100mm And Wxh 25x100mm Scope Of Delivery 4 Weir Plates 1 Level Gauge 1 Instruction Manual 1 Set Metacentric Height Apparatus Specifications: *water Tank: Moulded Plastic, Nominally 600mm X 400mm X 120mm *floating Pontoon: 350mm X 200mm X 90mm * Angular Tilt Of Pontoon: Nominally 15° Each Side Of The Vertical Centre Line * Working Height Of Sail: 240 Mm *adjustable Sail Weight: 525g Approximately Scope Of Delivery 1 Experimental Unit 1 Instruction Manual 1 Weight 1 Plumb Bob 1 Water Tank 1 Set Hydrostatic Pressure Apparatus Specifications: *determination Of Force On Surface Under Hydrostatic Pressure. Technical Data Water Tank Inclination Angle: 0~90° Content: 1.8l Quadrant Inner Radius: 100mm Quadrant Outer Radius: 200mm Effective Area Of Force: 75x100mm Lever Arm Maximum Length: 0~250mm Weights Balancing Weight: 250g Sliding Weight: 250g Scope Of Delivery 1 Experimental Unit 1 Instruction Manual 1 Set Orifice & Free Jet Flow Apparatus Specifications: *unit For Investigating The Discharge From Nozzles, For Use With The Hydraulic Bench *draining Of A Water-filled Plexiglass Cylinder Through A Nozzle *cylinder With Adjustable Overflow And Scale *4 Exchangeable Nozzles *8 Tracers And White Panel To Record The Jet Trajectory *determination Of: *coefficient Of Discharge (cd) *coefficient Of Velocity (cv) *coefficient Of Contraction (cc) Technical Data Plexiglass Cylinder: Capacity: Approximately 13.5ltr Maximum Constant Head: 350mm Diameter Of Discharge Nozzles 1x5mm Through 1x5mm Slanted 1x8mm Through 1x8mm Slanted Scope Of Delivery 1 Experimental Module 4 Orifices 8 Tracers 4 Magnets 1 Graph Paper 1 Instruction Manual 1 Stopwatch 1 Set Bernoulli's Theorem Apparatus Specifications: A) Venturi *the Venturi Meter Is Made Of Transparent Acrylic With The Following Specifications: * Throat Diameter: 16 Mm * Upstream Diameter: 26 Mm * Designed Flow Rate: 20 Lpm B) Manometer · There Are Eight Manometer Tubes; Each Length 320 Mm, For Static Pressure And Total Head Measuring Along The Venturi Meter. The Manometer Tubes Are Connected To An Air Bleed Screw For Air Release As Well As Tubes Pressurization. C) Baseboard · The Baseboard Is Aluminum Profile Structure And Designed With 4 Height Adjustable Feet To Level The Bernoulli’s Apparatus. D) Discharge Valve · One Discharge Valve Is Installed At The Venturi Discharge Section For Flow Rate Control. E) Connections · Quick Disconnecting Connections Hose Connections Are Installed At Both Inlet And Outlet Scope Of Delivery 1 Experimental Unit 1 Instruction Manual 1 Set Of Hoses 1 Stopwatch 1 Set Osborne Reynold's Apparatus Specifications: *visualization Of Laminar And Turbulent Flows *determining Critical Reynold’s Number Technical Data Visualization Tube Diameter: 10mm Length: 620mm Dye Reservoir: 440ml Measuring Cylinder: 2 Liter Scope Of Delivery 1 Experimental Unit 1 Instruction Manual 1 Measuring Beaker 1 Stopwatch 1 Set Flowmeter Measurement Apparatus Specifications: * Primary Flow Measuring Devices, Clear Plastics * Venturi Meter, Orifice Meter, Rotameter * Differential Pressure Measurement: Water Manometer, 8 Tubes Technical Data Venturi Throat Diameter: 16mm Venturi Inlet Diameter: 26mm Orifice Upstream Diameter: 26mm Orifice Diameter: 16mm Rotameter Maximum Range: 4-36 Ltr/min Scope Of Delivery 1 Experimental Unit 1 Instruction Manual 1 Set Of Hoses 1 Hand Pump 1 Set Pipe Friction Apparatus Specifications: Manometers Inverted U-tube Water Manometer (0-500mm) U-tube Mercury Manometer (0-500mm) Water Storage Adjustable Elevated Cylindrical Tank For Constant Head Tank Capacity: 1~1.8 Liter (level Indicator Included) Maximum Flow Rate: 30 L/h Test Pipe Length (nominal): >500mm Bore (nominal): 3~4mm Needle Valve Included To Regulate Flow Rate Scope Of Delivery 1 Experimental Unit 1 Instruction Manual 1 Beaker (for Measuring Of Flow Rate) 1 Stopwatch 1 Set Series & Parallel Pump Apparatus Specifications: Pumps *two Units Of Horizontal Single Stage Centrifufgal Pump (p1 And P2) *maximum Flow Rate:40-60 Lpm *maximum Pump Speed:0-3000 Rpm For Pump 1 And 0-3000 For Pump 2 *parallel Pumping Both Pumps 3 Phase Variable Speed *maximum Head 10m To 12m Approximately For Single Pump And 20m To 25m Approximately. Circulation Tank *a Transparent Plexiglass Water Tank Is Provided To Supply Water To P1 And P2. *flowrate And Pump Head, Speed And Power Indicators. *all Indicators Are Displayed In Its Respective Engineering Unit. No Conversion Is Required. Process Piping *the Process Piping Is Made Of Industrial Pvc Pipes. Valves Used Are Nonferrous To Minimize Rust And Corrosion. Valves And Interconnecting Pipe Work All Mounted On A Stainless Steel Base. Selector Switch *the Selector Switch Allows The Selection Of System Operates Either With 1 Pump Or 2 Pumps (series/parallel). Pressure/speed/flow Indicator *eqquiped With Measurement Gauge/sensor For Head Pressure Flow Rate, Speed Using. *with 3 Manometers Attached At Inlet Middle And Outlet From -1 To 4 Bars. Scope Of Delivery 1 Experimental Module 1 Instruction Manual 1 Set Universal Testing Machine 1000kn Capacity Specifications: Maximum Load(kn): 1000 Structure: Six Columns (4 Columns And 2 Screws) Load Accuracy: Class 1 Relative Error Of Reading: ≤±1% Load Range: 2%~100%fs Load Resolution: 1/500000 Deformation Measurement Range: 2%~100%fs Deformation Accuracy: ≤± 1%/0.5 Displacement Resolution: 0.001mm Displacement Error: ≤±0.5% Maximum Piston Moving Speed (mm/min): 100 Crosshead Moving Speed (mm/min): 220 Piston Stroke (mm): 250 Maximum Tension Test Space(mm): 950 Maximum Compression Test Space(mm): 700 Distance Between Columns (mm): 560 Column Diameter(mm): Φ72 Clamping Method: Hydraulic Automatic Clamp Round Insert (mm): Φ13-φ26;φ26-φ45 Flat Insert (mm): 0-20 Flat Specimen Clamping Width(mm): 100*100 Compression Plate Size (mm): Φ160 Span Of Bending Attachment (mm): 30-480 Length Of Roller (mm): 120 Height Of Supporter Of Bending (mm): 100 Power Supply: 3-phase, Ac380v, 50hz / 220v/60hz(can Be Customized) Dimension Of Load Frame (mm): 830*720*2155 Dimension Of Power Package (mm): 1200×667×780 Weight Of Machine (kg): 2350 Standard Accessories: Load Frame 1 Set- High Strength Main Frame 1 Set- Hydraulic Automatic Wedge Tensile Grip (round Specimen) 1 Set- Hydraulic Automatic Wedge Tensile Grip (flat Specimen) 1 Set- Compression Test Attachment Optional Bending Test Attachment 1 Set- Safety Door Power Package 1 Set- Control Cabinet 1 Set- Moter 1 Set- Oil Pump 1 Set- Plug-in Valve 2 Set- Pressure Monitoring Meter 3 Set- Magnetic Exchange Valve 1 Set- Oil Delivery And Return Valve Measurement And Control Part 1 Set- Load Sensor 1 Set- Photoelectric Encoder 1 Set- Electronic Extensometer 1 Set- Hand-held Controller 1 Set- External Independent Controller 1 Set- English Operation Software 1 Set- Computer 1 Set- Printer Other Accessories 4 Set- L-shaped Anchor Bolt 1 Set- Spare Sealing Element 1 Set Sieve Shakers Technical Specifications: No. Of Sieves Accommodated: 6 Sieves + 1 Set Of Lid-pan No. Of Tapping From Bottom: 85 To 90 Timer: Digital - Pre-settable Timer Range: 0 To 99 Minutes Power Supply: 220/230 Volts, 50 Hz, Single Phase, Ac Weight (kg): 57 Kg Overall Dimensions: 610 X 410 X 450 (l X W X D) Mm 1 Set Hot Air Oven (lab Precision Oven-250 °c) Digital -inner S.s Technical Specifications: Inner Working Size: 60 X 60 X 60 Cm ( H X W X D Chamber Volume: 216 Liters Inner Chamber: Made Of Stainless Steel S.s. 304 - Mirror Polished Material. Outer Chamber: Fabricated From Crc Material Paint: Powder Coating In Attractive Shades No. Of Trays: 3 Nos. (additional Shelf At Extra Cost) Temperature Range: 50°c To 250°c Temperature Sensor: Pt-100 Type Temperature Controller: Microprocessor Based Auto Tune - Pid Controller Temperature Accuracy: ± 1°c Or Better Temperature Resolution: 0.1°c Power Consumption: 220/230 Volt, 50 Hz, Single Phase, Ac Supply Mobility: Floor Standing Model, Fix Legs Rating: 2.5 Kw Overall Dimensions: 780 X 950 X 935 (l X W X D) Mm 1 Set Standard Vicat Apparatus Technical Specifications: *total Weight Of The Sliding: Unit 300g *maximum Stroke Of The Sliding Unit: 70mm *diameter Of Test Rod: 10mm *diameter Of Test Needle: 1.13mm *overall Size (l*w*h): 170*110*300mm *net Weight: 3.8kg 1 Set Concrete Slump Testing Apparatus Technical Specifications: * Steel Ruler: 300mm Long *metal Base Plate Size: 460*460*40mm *funnel Upper Diameter: Ø200mm *middle Diameter: Ø 100mm *bottom Diameter: Ø130mm *height: 240mm *slump Upper Diameter: Ø100mm *bottom Diameter: Ø 200mm *height: 300mm 1 Set Constant Head Permeameter Technical Specifications: Water Percolating Barrel: Ø100 X 400m Manometrical Tube Distance: 100 ±0.44m Dimension: 215 X 145 X 400mm (l X W X H) 1 Set Falling Head Permeameter Technical Specifications: Specimen: Φ61.8x40mm Dimension: 182x172x190mm Weight: 3.5kg 1 Set Liquid Limit Device (electric Type) Technical Specifications: *electric Motor Drive *cup Falling Frequency: 120 Hits/min (allowable Error 15%) *built-in Hit Counter Timer *packed In Aluminum Case. 4 Pcs Cylindrical Concrete Mould Size: 150mmøx300mm *made Of Cast Iron. *there Are Totally 6 Nuts Connecting 3 Parts (two Half And One Base) To One Cylinder Mould. *wall Thickness At Flange Is 17mm And 10mm At Body. *net Weight Is 18kg. 1 Set Concrete Air Entrainment Meter Technical Specifications: Volume: 7l Air Content Range: 0-100% Accuracy: 0-5% Is 0.1%, 6-10% Is 0.15%, 11-100% Is 0.25 Maximum Aggregate Particle Size: ≤40mm Pressure Gauge: Dustproof, Waterproof, Explosion-proof Main Unit Material: Magnesium Aluminum Zinc Copper Durable Alloy Buckle: Push Type Weighs: Around 9kg. 1 Set Abrasion Machine Technical Specifications: *revolutions: 30-33r/min *total Mass Of The Steel Balls: 5000±5g/12pcs *mass Of Steel Ball: 390-445g/ea *power Supply: Ac220v, 1.5kw Inclusions: 12 Pcs- Steel Balls 1 Pc- Main Unit 1 Set Marshall Stability Test Apparatus Technical Specifications: *maximum Capacity: 30kn (50kn Optional) *loading Speed: 50±5mm/min *proving Ring Capacity: 30kn *micrometer: 0-10mm,accuracy 0.01mm *power Supply: 220vac 50hz *motor Capacity: 550w Inclusions: 1 Pc- Main Unit 1 Pc- Proving Ring 1 Pc- Micrometer 1 Pc- Pressure Head 1 Set Strain Controlled Direct Shear Apparatus (three Speed) Technical Specifications: *main Vertical Load: 400kpa *pressure Grade: 50kpa,100kpa,200kpa,300kpa,400kpa; *respective Counter Weight: 1.275 Kpa, 2.55kpa, 5.1kpa,7.65kpa,10.2kpa *lever Ratio: 1:12 *specimen Area: 30cm2, Height Is 2 Cm *maximum Horizontal Shear Force: 1.2kn *power Type: Electric Power *respective Shear Speed: 0.02mm/min,0.8mm/min,2.4mm/min *power Supply: 220v 50/60hz *net Weight: 40kg Inclusions: 1 Set- Main Unit 1 Pc- Counterweight (1.27kg) 3 Pcs- Counterweight (2.55kg) 1 Pc- Hanging Scaffold Accessories (1.275kg) 1 Set- Shear Cell Accessories (inclluding Following) 1 Pc- Pressure Plate 1 Pc- Cutting Ring 2 Pcs- Porous Stone 1 Pc- Micrometer Holder 1 Pc- Micrometer Pole 1 Set- Steel Ball Ø10 1 Set Consolidation Test Apparatus Technical Specifications: Type: Triplex Cell: 3pcs Outer Size(l*w*h): 65*68*90cm Total Weight(kg): 290(include Weight Specimen Size: 30cm2, 50cm2 Lever Ration: 24:1 20: 1 Loading Method: Weight Load Pressure: 4000kpa(30cm2), 2000kpa(50cm2) Pressure Range: 12.5kpa ~ 4000kpa Inclusions: 1 Set- Main Unit 3 Pcs- Lever Sensitivity Weight (10g) 1 Pc- Crossbeam Vertical Part 24 Pcs- Weight (5.1kg) 6 Pcs- Weight (2.55kg) 9 Pcs- Weight (1.275kg) 3 Pcs- Weight (0.637kg) 3 Pcs- Weight (0.319kg) 6 Pcs:3 Pcs- Weight (0.159kg) 3 Pcs- Hanging Part For Weight (0.319kg) 3 Pcs- Consolidometer Cell Part (include Big/small Cutting Ring, Porous Stone D79.8/61.8/83, Dial Indicator Frame/clamp, Etc.) 1 Set Sieves Apparatus Pan (200mm Diameter) Specifications: *with Brass Frame *sizes: 100,200,18,30,10,12,60,16,14,1.5,3/8,3/4,1,1/2,6,50,70,80 1 Set Sand Cone Apparatus Specifications: Diameter: 150mmφ Complete Sets: Pouring Cylinder, Calibration Container 1 Set Soil Hydrometer Range 0.950 To 1 Specifications: For Analytical Laboratories, Shot & Wax Poised Adjusted For Use At 15deg C, M-50 Sp. Calibration: 0.0001 Maximum Length: 270mm Accuracy: ± 0.002 3 Pcs Beam Mould Specifications: Concrete Flexure Mould Size: 150mm X 150mm X 550mm 1 Set Aggregate Preparation Sample Splitter Specifications: Slot Width: 75mm With 2 Pans 1 Set California Bearing Ratio(cbr) Technical Specifications: Max. Loading: 50kn Display Mode: Proving Ring Central Axis Lifting At Lower Speed: 1mm/min (1.27mm/min) Central Axis Lifting At Higher Speed (hand Wheel): 1mm/53 Circles Maximum Stroke Of Axis: 100mm Speed Switch Mode: Stop Motor Then Switch Mode Power: 220vac 50/60hz 1 Set Total Station With Tripod Specifications: Telescopic Length: 154mm Diameter: Telescope:45mm:edm:50mm Magnification: 30x Image: Erect Field Of View: 1°30 Resolving Power: 3'' Mini.focus: 1.0m Distance Single Prism Range: 500m Accuracy: ±(2mm+ 2ppm*d)m.s.e R2: Non-prism Range: 600m Accuracy: ± 3mm+ 2ppm*d) M.s.e Fine: Measuring Time: 0.7s: Normal 0.5s Ppm Correction: Atmosense Auto Correction Prism Constant: Manual Angle Accuracy: 2'' Method: Absolute Encoding Detection System: H:dual:v Dual Mini. Reading: 1''/5''/10'' Diameter Of Circle: 79mm Vertical Angle 0°: Zenith:0°: Horizontal:0° Unit: 360°/400gon/6400mil Display Display Unit: Graphic, 160*90 Dots With Backlight No. Of Displays: 2 Keyboard: Alphanumeric Tilt Correction Tilt Sensor: Dual Axis Method: Liquid Electric Range: 4' Resolution: 1'' Optical Plummet (laser Optional) Image: Erect Magnification: 3x Focusing Range: 0.3m To Infinite Field Of View: 5° Level Plate Level: 30''/2mm Circular Level: 8'/2mm Data Storage Internal Memory: >10,000 Point Date Interface: Usb 2.0 Pendrive Wireless: Bluetooth 2.1 Wt12 General Weight: 5.4kg Dimension: 353(h)* 206(l)*200(w)mm Working Temperature: 20°c To 50°c Battery Type: Rechargeable Li-on 7.4v, 3000mah Water & Dust Proof: Ip65 Working Duration: 16hours 1 Set Theodolite With Tripod Specifications: Telescope Magnification: 30x Image: Erect Shortest Sighting Distance: 1.5m Field Of View: 1°30' Angle Measurement Accuracy: 2'', 5'' Minimum Display: 1'',5'',10'' Compensator Type: Single Axis Liquid Tilt Sensor Range: ±3' Electronic Reference Battery Type: Rechargeable/5xaa Alkaline Batteries Battery Volume: 1800mah. 6v(ni-mh Battery) Battery Life: 15 Hours Others Plummet: Optical/laser Weight: 5kg Working Temperature: -20°c - +45°c 1 Set Automatic Level With Tripod Telescope Length: 215mm (8.46in.) Magnification: 32x Objective Aperture: 42mm (1.65.) Resolving Power: 3'' Field Of View (at 100m/328ft.): 1°20' (2.3m/7.5ft.) Minimum Focus: 0.2m (7.9 In.) From End Of Telescope 0.3m (1ft.) From Instrument Center Image: Erect Stadia Constant: 0 Stadia Ratio: 100 Focusing Knob: 2-speed Sighting Aid: Peep Sight Accuracy (1km Double Run Leveling) Without Micrometer: 0.7mm (0.03 In.) With Micrometer: 0.5mm (0.02 In.) Compensator Type: Pendulum Compensator W/ Magnetic Damping System Setting Accuracy: 0.3'' Working Range: ± 15' Circular Level Sensitivity: 10'/2mm Horizontal Circle Diameter: 103mm (4.1 In.) Minimum Division: 1°/1 Gon General Water Resistance: Ipx6 (iec 60529:2001) Operating Temperature: Size: Width: Length: Height: 130mm (5.12in.) 215mm (8.46in.) 140mm (5.51in.) Weight: 1.85kg (4.1lbs.) 1 Set Leveling Rod 2 Sets Prism With Prism Pole