MUNICIPALITY OF BELISON, ANTIQUE Tender

Description 1 Unit Backhoe Loader Unit Operating Weight : 9,100 - 9,150 Kg Engine A. No Of Cylinders : Must Be 4 B. Rated Power : 100-105 Hp @ 2200 Rpm C. Displacement : 4000cc-4400cc D. Maximum Torque : 400-415 Nm @ 1400 Rpm E. Emission : At Least Tier 3 F. Cooling System : Water Cooled G. Aspiration : Turbocharged H. Type : Diesel Engine Transmission : Must Be Autoshift Transmission : Must Be Electrically Controlled 2w/4w Drive Selection : Must Be 6 Forward, 3 Reverse Gears : Transmission Oil Cooler Axles : Must Be Planetary Outboard Type Reduction Gear : Must Be Torque Proportional Type Front Axle Differential : Must Have Limited Slip Differential ( Lsd ) Type, Rear Axle Differential Accessories/cab A. Must Have At Least 4.3" Tft ( Thin Film Transistor ) Display - Front And Side Panel B. Must Be Equipped With Rops And Fops Certificated Cab C. Must Have Tipshift (fnr)function D. High Capacity A/c System E. Rtd ( Return To Dig ) Function F. Loader Boom Lock G. Double Brake System Hydraulic System : Must Be Tandem Gear Type Main Pump A. Main Pump Flow : 90 - 95 L/min @ 2200 Rpm B. Pressure : 255-260 Bar Tires A. Front : 16/70 - 20 12 Ply Rating B. Rear : 16.9 - 28 14 Ply Rating Loader A. Bucket : Heavy Duty, Multi Purpose 6 In 1 Bucket B. Bucket Capacity : At Least 1.1 M3 C. Max Bucket Breakout Force : 7200 - 7300 Kgf D. Max Loading Arm Break Out Force: 6500 - 6520 Kgf E. Lifting Capacity To Max Height : 3165 - 3175 Kgf Backhoe A. Bucket Capacity : At Least 0.18m3 B. Max Bucket Breakout Force : 6360 - 6370 Kgf C. Max Arm Breakout Force : 2840 - 2,850 Kgf D. Must Be Equipped With Side Shifter D. Must Be Equipped With Hydraulic Breaker Line 1 Unit Mini Dump Truck 6 Wheeler, At Least 4m3 Volume, 3 Tons Load Capacity, Minimum Tier 4 Or Equivalent, Water Cooled, 4 Cylinder, 95-100 Hp Engine. Airconditioned Cab. Terms And Conditions For Heavy Equipment: If Bidder Is An Appointed Authorized Dealer (aad) By An Exclusive Philippine Dealer (epd). Joint Certification Issued By Epd And Aad. They Must Issue A Joint Certification Signed By The Authorized Representative Of Each Company Showing That The Aad Has Been Authorized By Epd To Offer The Brand To The Procuring Entity. Warranty Certification Issued By Epd. Epd Must Issue A Warranty Certification (wc) That “if Awarded The Contract, The Exclusive Philippines Dealer Will Issue A Warranty Certificate Indicating That The Procuring Entity Is The Registered Owner Of The Construction Equipment And Its Ownership Will Be Reported To The Manufacturer. Manufacture’s Certification Issued Thru Epd. Epd Must Provide A Manufacture’s Certification (mc) That The Procuring Entity Has Been Registered In Its Customer Information System. This Certification Should Be Notarized In The Country Of The Manufacturer And Provided Within (90) Days Upon Receipt Of Delivery By The Procuring Entity. After Sales And Service Certification Issued By Epd. Epd Must Issue An After Sales And Service Certification (assc), That Aad Is Authorized To Perform The Following, As Follows: Perform Preventive Maintenance. Perform Trouble Shooting. Process Warranty Claims. If Epd Cannot Issue The Assc For The Above Support Services, Then The Bidder / Aad Is Encourage To Join The Tender Thru A Joint Venture With The Epd In The Tender. The Authorized Representative Of Each Company Should Have A Valid Secretary Certificate Issued By The Company Appointing Him Or Her To Sign The Following Documents, As Follows: Joint Certification Issued By Epd And Aad; Warranty Certification Issued By Epd; And After Sales And Service Certification Issued By Epd. If Bidder Is The Exclusive Philippines Dealer (epd), Warranty Certification Issued By Epd. Epd Must Issue Warranty Certification (wc) That “if Awarded The Contract, The Exclusive Philippines Dealer Will A Warranty Certificate Indicating That The Procuring Entity Is The Registered Owner Of The Construction Equipment And Its Ownership Will Be Reported To The Manufacturer. Manufacturer’s Certification Issued Thru Epd. Epd Must Provide A Manufacturer’s Certification (mc) That The Procuring Entity Has Been Registered In Its Customer Information System. This Certification Should Be Notarized In The Country Of The Manufacturer And Provided Within (90) Days Upon Receipt Of Delivery By The Procuring Entity. Note: Above Conditions Were Set As There Have Been Some Reports Of Unauthorized Retail Of Heavy Construction Equipment By The Traders Or Unscrupulous Dealers Without Any Authority From The Exclusive Dealer Or Manufacturer. Such Act Has Been Disadvantageous To The Procuring Entity As Warranty Claims Has Not Been Recognized By The Exclusive Dealer And Manufactures. Additional Terms And Conditions: • Bids To Be Accepted Must Be One (1) Lot Only • Supplier Is Allowed To Participate The Lot Package As Long As The Latter Has The Exclusivity Of Philippine Distributorship Of Either In Line Of Equipment Or In Line Of Truck, As Long As The Buyer Is Protected By Warranty, Spare Parts Availability And Services • The Bidder Must Be In Existence In The Philippine Market For At Least 20 Years At The Time Of Bid Opening. • Supplier Must Be Lto Accredited For Trucks • Supplier Offering An Equipment With Electronic Components Is Required The Use Of Specialized Diagnostic Tools With Dedicated Software.