Metro Lipa Water District Tender

Description 6 Units Variable Frequency Drives 30hp 230v 3ph Specs: Variable Frequency Drives Applicable Motor Output: 22kw/30hp, 230v, 3ph Rated Output Capacity ( Heavy Duty Application) : 34kva Rated Output Current ( Heavy Duty Application) : 86 Amp Input Current ( Heavy Duty Application ) : 95 Amp Rated Voltage/frequency: 200-240v(-15%-+10%), 3ph 50/60hz Operating Voltage Range: 170-265 Vac Frequency Tolerance: 47-63hz Cooling Method: Fan Cooling General Specifications: Control Method: Pulse Width Modulation (pwm) Control Mode: 1:v/f, 2: Svc, 3: Vf+pg, 4: Foc+pg, 5: Tqc+pg, 6: Pm+pg, 7: Foc Sensorless, 8: Tqc Sensorless, 9: Pm Sensorless Starting Torque: Reach Upto 150% Or Above At 0.5hz. Under Foc+pg Mode, Starting Torque Can Reach 150% At 10hz V/f Curve: 4-point Adjustable V/f Curve And Square Curve Speed Response Ability: 5hz (vector Control Can Reach Up To 40hz) Torque Limit: Max 200% Torque Current Torque Accuracy: +5% Max. Output Frequency: Normal Duty: 0.00-600.00hz; 0.00-300.00hz Freq. Output Accuracy: Digital Command: +0.01%, 10°c-+40°c, Analog Command: +0.1%, 25+10°c Output Freq. Resolution: Digital Command: 0.01hz, Analog Command: 0.03xmax. Output Frq./60hz(+11bit) Oveload Tolerance: Normal Duty: Rated Output Is 120% For 60 Seconds Heavy Duty: Rated Output Current Is 150% For 60 Seconds Freq. Setting Signal:+10%-10, 0-+10v, 4-20ma, 0-20ma Pulse Input Accel./decal. Time: 0.00-600.00/0.0-6000.0 Seconds Main Control Function: Torque Control, Droop Control, Speed/torque Control Switching, Feed Forward Control, Zero-servo Control, Momentary Power Loss Ride Thru, Speed Serach, Over-torque Detection, Torque Limit, 17-step Speed (max) Accel/decal Time Switch, S-curve Accel./decal., 3-wire Sequence, Auto-tunning (rota- Tional, Stationary), Dwell, Cooling Fan On/off, Slip Compensation, Torque Compensation, Jog Frequency, Frequency Upper/lower Limit Settings, Dc Injection Breaking At Start/stop, High Slip Braking, Pid Control (with Sleep Function), Energy Saving Control, Modobus Communication (rs-485 Rj45, Max. 115.2 Kbps), Fault Restart, Parameter Fan Control: 230v Model: Vfd150c23a (include) And Series Above: Pwm Control; Vfd150c23a And Series Below On/off Switch Control Motor Protection: Electric Thermal Relay Protection Over-current Protection: Over-current Protection For 240% Rated Current Current Clamp Normal Duty: Around 170-175% Heavy Duty: Around 180-185% Over-voltage Protection: 230: Drive Will Stop When Dc-bus Voltage Exceeds 410v Over-temp. Protection: Built-in Temperature Sensor Stall Prevention: Stall Prevention During Acceleration, Decelaration And Running Independently Restart After: Parameter Setting Up To 20 Seconds Instantaneous Power Failure Ground Leakage: Leakage Current Is Higher Than 50% Rated Current Of The Ac Motor Drive Current Protection Note: Can Be Use In 1ph Input - 3ph Output Dimension : Width : 250 Mm Hieght : 400 Mm Depth : 210 Mm