Interior Tenders

Purchaser Name: Information Center Of The Ministry Of The Interior Of The Republic Of Latvia | Latvia – Installation Services Of Video Equipment – Videonovērošanas Sistēmu Ierīkošana, Modernizācijaun Uzturēšana Uz 4 Gadiem

Purchaser Name: Information Center Of The Ministry Of The Interior Of The Republic Of Latvia | Climate Control Equipment Technical Maintenance And Emergency Repair For 3 Years

Purchaser Name: Balıkesir Provincial Directorate of Migration Management MINISTRY OF INTERIOR GENERAL DIRECTORATE OF | 2025 Balikesir Provincial Directorate of Immigration Administration Irregular Immigrant Referral Process Vehicle Rental Service Purchase

Purchaser Name: Departamento De Hacienda, Interior Y Administraci N P Blica Del Gobierno De Arag N | Spain – Travel Agency And Similar Services – Amh Servicios Agencia De Viajes

Purchaser Name: Departamento De Hacienda, Interior Y Administraci N P Blica Del Gobierno De Arag N | Spain – Travel Agency And Similar Services – Amh Servicios Agencia De Viajes

Details: Amendment 0001 - The Due Date For Qualifications Has Been Extended To Monday, January 13, 2025, 2:00pm Est. Government Responses To Rfi's Have Been Attached To This Notice. description: this Is A Request For Qualifications For Architect And Engineering (a&e) Services. This Request Is 100% Set-aside For Small Business’s Registered Under The Applicable Naics Code 541330 – Engineering Services, With A Size Standard Of $25,500,000. the National Institute Of Standards And Technology (nist), An Agency Of The U.s., Department Of Commerce, Intends To Award Multiple Indefinite Delivery Indefinite Quantity (idiq) Contract(s) For General Architectural And Engineering (a/e) Services For The Nist Gaithersburg Campus Located At 100 Bureau Drive, Gaithersburg, Md 20899. A/e Services Under The Contract May Include The Following: evaluation And Feasibility Studies To Include Engineering Modeling And Simulation demolition Of Nist Structures, Utilities, And Infrastructure repair And/or Repair By Replacement, Modification/reconfiguration, Building Additions, And Upgrades To Nist Facilities (e.g., Laboratories/scientific Research, Office, Industrial). Including But Not Limited To Architectural, Mechanical, Electrical, Communications, Structural, Fire Protection, And Building Enclosure (e.g., Roofs, Windows, Foundations). repair And/or Repair By Replacement, Modification/reconfiguration For Campus Utility Systems And Supporting Underground Structures comprehensive Historical Assessments For The Preservation, Rehabilitation, And Restoration Of Historic Property interior Design Services Consisting Of Programming And Space Assessment, Fit Plans, And Office Furniture To Enhance Aesthetics, Comfort, Efficiency, And Workplace Safety. cost Estimating For Different Levels (e.g., Concept, Detailed Program, Project) life Cycle Cost Analysis Identifying Cost Elements From Initial Concept Through Operations, Support, And Disposal. hazardous Material Survey And Risk Assessment (e.g., Asbestos, Mold, Lead Paint) roofing And Waterproofing Services Such As Visual Inspections And Existing Conditions Surveys, Failure Investigation, And Design For Repairs. commissioning Design Including Assistance Of Development Owner’s Project Requirements (opr), Design Document Reviews, Development Of Commissioning Specifications And Or Initial Commissioning Plan program Of Requirements (por) Development By Meeting With Campus Personnel And Confirming Design Intent For Building And/or Major Systems (e.g., Mechanical, Electrical, Plumbing, Structural, Controls, Security, Fire Alarm, Etc.) value Engineering Analysis To Achieve Design Goals While Lowering Life Cycle Costs And Maintaining The Required Performance, Quality, Reliability, And Maintainability. record Drawings Development From Compiled As-built Set. surveying (e.g., Alta/ascm, Boundary, Topographic, Construction, Site Planning) roads/sidewalks Repairs And Replacement evaluation Of Items Requiring Earthwork Such As Excavation, Grading, Ponds, Drainage, Foundation, And Footings landscaping Design gates, Fencing, And Related Engineering Necessary To Support A Campus Environment permit Applications Submission To Regulatory Authorities Based On Specific Project Requirements. To Be Coordinated With Cor And Or Ahj For Acceptance And Or Approval environmental Compliance (state Or Federal) Conforming To Laws, Regulations, Standards, And Other Requirements construction Quality Management To Include But Not Limited To Commissioning Services contract Information: the Period Of Performance Of The Idiq Contract(s) Shall Be Five (5) Years. Annual Fully Burdened Labor Rates Will Be Negotiated Prior To Award. All Services Will Be Ordered Via The Issuance Of Individually Negotiated Firm-fixed-price Or Not­to-exceed Task Orders, Ranging In Value From $10,000 And $2,000,000. Each Idiq Contract Shall Include A Guaranteed Minimum Order Of $5,000. The Cumulative Amount Of All Task Orders Shall Not Exceed $9,800,000. the Government Anticipates Award Of Three (3) Or More Idiq Contracts; However, The Actual Number Of Awards Shall Be Made At The Discretion Of The Government. submission Requirements: consideration Will Be Limited To Professional A/e Firms Licensed And Registered In Maryland Who Provide A/e Services Primarily In The Disciplines Of Architectural, Civil, Structural, Mechanical, Electrical, And Environmental Engineering For Pre-design, Design, And Post-design Of Research Laboratory Facilities. firms Meeting The Above Requirements And Desiring Consideration Must Submit Their Qualifications By No Later Than The Date Specified In This Announcement Via Email To The Following Addresses Using The Email Subject Line “rfq Submission – General Ae Services Idiq Nb195000-25-00009”: Trent.stevens@nist.gov Guzel.gufranova@nist.gov Teresa.harris@nist.gov qualification Submissions Shall Include One (1) Original Electronic Copy In Adobe .pdf Format Of Their Standard Form 330 (sf-330) With Appropriate Data. Ae Firms Shall Include All Subcontractor's Resumes In Part 1 Of The Sf-330. Part 2 Of The Sf-330, General Qualifications, Should Also Be Submitted For Each Subcontractor Or Consultant. Indicate The Solicitation Number On All Documentation Submitted. along With The Sf-330, Offerors Shall Include: a Copy Of Your Current Registration In System For Award Management (sam); proof Of Small Business Status; a Cover Page That Provides: offeror’s Name And Address; offeror’s Uei Number; And, the Name, Title, Email, And Phone Number For The Authorized Representative Of The Offeror. submissions Will Be Evaluated By A Source Selection Evaluation Board (sseb) And Ranked Based On The Stated Evaluation Factors. The Government Will Then Establish A Competitive Range; Firms That Fall Within This Range Will Be Invited To Present Their Capabilities To The Sseb. Formal Solicitations Requesting Fee Proposals Will Be Issued To The Highest Qualified Firms As Determined By The Government. request For Information (rfi) questions And Rfi's Must Be Submitted No Later Than 1:00pm Et On 12/10/2024 Via Email To The Following Addresses Using The Subject Line “rfi - General Ae Services Idiq Nb195000-25-00009” : Trent.stevens@nist.gov Guzel.gufranova@nist.gov. the Contracting Officer Will Post Government Responses To Rfi’s On This Site As An Amendment To This Announcement. Firms Are Responsible For Monitoring This Site For Amendments To The Request For Qualifications. selection Criteria: all Work Performed Shall Be Under The Direct Control And Supervision Of A Professional And Experience Licensed Architect/engineer Employed By The Prime Contractor Assigned As The Responsible Party. part I: Evaluation Of Sf-330 prospective A-e Firms Will Be Evaluated Based On Their Demonstrated Competence And Qualifications For The Type Of Professional Services Required. The Agency Will Evaluate Each Potential A-e Firm In Terms Of This Announcement. The Selection Criteria Are Listed Below In Descending Order Of Importance: factor 1: Specialized Experience page Limit – 15 Pages firms Who Fail To Meet The Qualifications Of Factor 1 Will Not Be Evaluated On Subsequent Evaluation Factors And Will Not Be Considered For Award. offeror Shall Demonstrate The Specialized Experience And Technical Competence Of Its Firm And Its Proposed Subcontractors Performing A/e Services Meeting The Criteria Of This Solicitation Within The Past Sixty (60) Months By Providing At Least 3 But No More Than 5 Example Projects (sections F, G, And H Of The Sf330) Addressing Each Of The Subfactors Listed Below (1a, 1b, 1c, And 1d). Offeror Shall Provide At Least One Example For Subfactor 1d. All Designs Shall Be Completed At Time Of Request For Qualifications (rfq). For The Purposes Of This Evaluations, “completed” Projects Shall Mean Projects Where Final Work Was Submitted, Approved, And Accepted By The Project Owner. A. The Offeror Shall Describe Design For Renovations With Dates That Include Commercial Window Replacements, Masonry Repairs, And Roofing Repairs. Roofing Designs Are For Replacement Of An Existing Roofing System And Would Include Design And Specifications For New Built-up Roofs (at Least Three Ply) Of At Least 20,000 Sf Minimum, Including Drains, Coping And Flashing. Built Up Roofing Can Either Be Hot Or Cold Applied. B. The Offeror Shall Also Describe With Dates Laboratory Design For Renovations Of At Least 2,000 Sf Which Include Replacement Or New Fume Hood Installation Of A Fume Hood At Least Four Feet In Width, New Laboratory Grade Casework, New Seamless Flooring, And Plumbing That Includes Either Eye Wash Station Or Safety Showers. Laboratories Shall Be For Commercial Facilities, Federal And State Facilities, Hospitals, And College/universities. High School And Lower School Grade Laboratories Will Not Be Considered. C. The Offeror Shall Describe With Dates Designs That Include Laboratory Facility Mechanical, Plumbing, And Electrical Renovations, Upgrades And Alterations That Include Major Utility Systems, Facility Construction And Reconfiguration, Branch Circuits Of At Least 50 Amperes At 208v Or 480v, 3 Phase Power For Installation Of Specialized Scientific Tools, Equipment And Instrumentation (provide Amperage, Phases, And Voltages In Offer). The Contractor Shall Describe Distribution Of Manifold Specialty Gasses Utilizing At Least One Of The Following (nitrogen, Helium, Compressed Air, Or A Custom Blend) Within The Lab (note Which Gas Was In Manifold). D. The Offeror Shall Describe, With Dates, Life Safety And Code Compliance Of The Following: Ibc And Nfpa Analyses, Access And Egress Analyses, Fire Alarm Systems And Device Designs, Nfpa 13 Fire Suppression System Modification Calculations And New Installations, And Hazardous Detection Systems (radiological Or Toxic Gas Monitoring Systems). Note Which Detection System (radiological Or Toxic Gas Monitoring System) Is Being Referenced. factor 2: Professional Qualifications page Limit – 17 Pages the Offeror Shall Demonstrate The Technical Expertise And Professional Qualifications Of Its Proposed Team, Including Subcontractors And Consultants, To Perform The Required A/e Services By Providing Résumés (section E Of The Sf330) For All Of The Following Disciplines: principle senior Architect senior Cost Estimator senior Civil Engineer senior Electrical Engineer senior Fire Protection Engineer senior Geo-technical Engineer senior Laboratory Planner mechanical Engineer (piping) senior Mechanical Engineer (piping) senior Mechanical Engineer (hvac) senior Environmental Engineer senior Scheduler senior Surveyor senior Water Proofing Engineer senior Structural Engineer 2. Senior Positions Of Each Discipline Shall Have A Minimum Of Ten (10) Years Applicable Experience And Shall Be Licensed And/or Certified In Their Applicable Discipline. 3. The Offeror Shall Identify The Roles Of Its Key Personnel By Provide Resumes/sf 330s For Its Proposed Key Personnel That Include Credentials, Education, Registrations, Relevant Experience, And Their Role In Performing Requirements Outlined In Factor 1. 4. The Offeror Shall Submit An Organizational Chart Showing The Interrelations Of The Proposed Team Including All Subcontractors And Consultants. factor 3: Geographical Location page Limit – 1 offeror Shall Be Within 50 Miles Of The Nist Main Campus In Gaithersburg, Md. Nist Address Is 100 Bureau Drive, Gaithersburg, Md 20899. Offeror Shall Demonstrate This Distance By Submitting Information (driving) Via An Internet Mapping Program. The Driving Shall Begin At The Offeror’s Office To Nist. factor 4: Capacity page Limit – 2 Pages the Offeror Shall Describe Their Team, Including Subcontractors, Capability To Complete Simultaneous Tasks Within The Required Timeframe Based On Current And Planned Workload And Expected Backlog. the Offeror Shall Confirm That There Is Sufficient Capacity Within The Firm, Or That Additional Professional Capacity Can Be Increased As Needed In A Timely Manner To Deliver Projects That Meet The Government’s Specialized Requirements. factor 5: Past Performance page Limit – None offeror Shall Provide Past Performance Information For The Relevant Projects Identified In Their Factor 1 – Specialized Experience Submission In The Form Of Either A Contractor Performance Assessment Reporting System (cpars) Report Or The Provided Past Performance Questionnaires (ppqs). if The Project Was Completed For The Federal Government, The Offeror Shall Provide A Copy Of The Most Recently Completed Contractor Performance Assessment Reporting System (cpars) Report. if No Cpars Is Available, Offeror Shall Use The Provided Past Performance Questionnaire (ppq). Ppqs Shall Be Completed And Signed By The Customer Identified In The Relevant Project. Limit Of One Ppq Per Project. if An Offeror Submits Incomplete Past Performance Or Fails To Submit Any Past Performance Information, The Government May Evaluate Past Performance Based On The Information Obtained Concerning The Offerors’ Performance Relevant To Services Similar In Scope, Complexity, And Size For The Prime Contractor. Additionally, The Following Resources Will Be Used For Evaluation: contractor Performance Assessment Reporting Systems (cpars), Or Similar Systems Of Other Government Departments And Agencies, interviews Within Nist If Offeror Holds/held Previous Contracts, interviews With Program Managers And Contracting Officers, And; other Sources Known To The Government, Including Commercial Sources. in The Case Of An Offeror Without A Cpars Record Of Relevant Past Performance Or For Whom Information On Past Performance Is Not Available, The Offeror Shall Be Rated Neither Favorably Nor Unfavorably. part Ii: Oral Presentations in Accordance With Far 36.602-3, The Government Will Hold Discussions With At Least Three Of The Most Highly Qualified Firms (firms Within The Competitive Range). More Details Related To The Presentations Will Be Provide To The Firms That Are Selected To Move Forward. fee Proposal only Those Firms Selected For Award Will Be Invited To Provide A Fee Proposal. Firms Shall Submit Along With Their Fee Proposal A Copy Of Audited Overhead Rate Statement Prepared In Accordance With The Federal Acquisition Regulation (far), Part 31 For The Prime And Their Sub-consultants. The Audit Must Be From A Federal, State, Local Government Or An Independent Third-party Auditor In Accordance With Far 31. Audit Conducted In Accordance With Generally Accepted Accounting Principles (gaap) Will Not Be Accepted.

Purchaser Name: Spa And Medical Institute Of The Ministry Of The Interior Of The Slovak Republic Arco | Slovakia – Food, Beverages, Tobacco And Related Products – Dns Potraviny

Purchaser Name: State Border Guard Service at the Ministry of the Interior of the Republic of Lithuania | Lithuania – Laboratory, Optical And Precision Equipments (excl. Glasses) – Ii Kontrolės Linijos Skenerio Su Veido Atpažinimu Pirkimas

Purchaser Name: State Border Guard Service at the Ministry of the Interior of the Republic of Lithuania | Lithuania – All-terrain Vehicles – Visureigiai Automobiliai

Details: Description Provision Of Manpower Services (driver & Janitorial) For Csc Regional Office For Cy 2025 (lot 1) Location / Area: Csc Regional Office, No. 7 Oñate Street, Mandurriao, Iloilo City Terms Of Reference: Provision Of Manpower Services (driver & Janitor) Covering January 1, 2025 To December 31, 2025. The Agency Shall Provide One (1) Driver And (2) Janitors Reporting For Work Daily As Maybe Directed By The Entity Except Saturdays, Sundays And Holidays, Or As Needed With Approved Request For Overtime. Provided, However, That The Work Schedules Of The Assigned Personnel Will Be With The Entity Conformity Of Knowledge. Provided Further, That The Agency Obligates Itself To Increase Or Decrease The Number Of Assigned Personnel Upon Request Of The Entity. 1. General Conditions/technical Specifications: A.1 Driving Services 1. Ensure That Office Vehicles Are Road Worthy Using The Checklist Of Blow Bagets. Likewise Ensure That These Are Kept Clean Before, During, And After Use. 2. Perform On A Daily Basis, Basic Vehicle Cleaning Such As, But Not Limited To, Washing Of Windshields, Simple Body And Tire Cleaning, Wiping Of Dashboards, Ensuring That Interiors Are Free Of Food And Litter, Cleaning Of Seats And The Like. 3. Monitor And Ensure That Vehicle Preventive Maintenance Schedule Is Implemented As Scheduled And The Vehicles Are Kept Roadworthy At All Times. 4. Immediately Report To The Msd Chief Through The Designated Property Officer, In Cases Where The Vehicles Would Need Urgent Repairs For Issues Other Than The Scheduled Maintenance. 5. Perform Messengerial Services As May Be Required Such As But Not Limited To Delivery Of Mails To Courier Service Centers, Perform Simple Liaison Services To Agencies And Other Entities. 6. Vouchers And Its Supporting Documents, Complete And Correct, Should Be Endorsed To The Cashier Upon Return To The Office. Delivery Receipts And/or Receiving Copy Of Documents Should Be Returned To The Requesting Party Asap. 7. As Far As Practicable, Ensure That Vehicle Fuel Is Replenished At The End Of The Trip For The Day. 8. Prepare The Fuel Request Form And Secure Approval From The Msd Chief Through The Designated Property Officer, And Attach The Fuel Receipt To The Fuel Request Form, For Filing. 9. Prepare The Necessary Documents And Other Requirements Needed For The Processing Of Payment For Fuel Every 15th Day Of The Month Except December, The Due Of Which Is The Last Working Day Of The Year. 10. Submit The Properly Accomplished Trip Tickets To The Msd At The End Of Each Trip With Details Such As Date Of Trip, Destination, Purpose Of Trip, Time Of Departure And Arrival, Names Of Passengers, Etc. 11. Surrender The Vehicle Keys To The Guard-on-duty Before Logging Out Of The Office. A.2 Vehicle Maintenance 1. Vehicles Shall Undergo Preventive Maintenance In Accordance With The Approved Vehicle Maintenance Schedule Per Office Vehicle Or As Often As May Be Necessary. Total Distance Travelled Shall Be Monitored For Purposes Of Maintenance Reference. 2. Visual Checking Of Vehicles Should Be Done Regularly. This Includes Checking Of Engine For Leaks, Condition Of Engine Belts And Liquids, Ensure That Vehicle Is Free From Dents And Scratches, Tire Condition, Etc. 3. Renewal Of Vehicle Registration Should Be Done At Least One (1) Week Prior To Its Expiration. A.3 Use Of Office Vehicles 1. The Use Of Office Vehicles Shall Always Be Covered By A Duly Accomplished And Signed Trip Ticket, Indicating The Following: I. Date, Time, Destination, And Other Required Information; Ii. Initials Of The Msd Chief Or Designated Property Officer Affixed Below The Printed Name Of The Authorized Official Iii. Signature Of The Regional Director, Asst. Regional Director Or In Their Absence, The Officer-in-charge. 2. Requests To Avail Of Transportation Services Shall Be Submitted To The Msd At Least 3 Days Before The Scheduled Trip, Using The Prescribed Request For Utility Vehicle (ruv) Form, With A Copy Of The Approved Office Order Of The Requesting Party. 3. Approval Of The Request For The Use Of A Utility Vehicle Shall Be On A First-come-first-served Basis, Subject To Availability Of Drivers And Vehicles. 4. Vehicles May Be Used To Perform Messengerial And Support To Liaison Services. 5. In No Case Shall An Office Vehicle Be Used Without Proper Authorization From The Management Through The Msd. B. Janitorial Services 1. Washing Of Inside Windows And Doors, Frames And Screen; 2. Cleaning And Polishing Of Office Furniture And Fixtures And Counter Excluding Items Or Equipment That Require Specialized Maintenance, Furniture Such As Davenport And Chairs Showing Signs Of Spill Due To Any Caused Shall Be Washed And Cleaned; 3. Washing, Scrubbing And Polishing Of Floors; 4. Application Of Special Sanitizing And Waxing Solution To Hallways, Lobbies And Offices; 5. Dusting And/or Damp Wiping Of Glass Tops, Glass Door, Counters And Furniture; 6. Dusting Of Inside Windows, Window Ledges, Air-vents, Stair Railing And Other Horizontal And Vertical Surfaces; 7. Cleaning Of Glass Walls And Glass Partitions; 8. Cleaning Of Trash Receptacles; 9. Assist In Transferring Of Tables, Chairs, Cabinets And Counter, Etc. Upon Instruction By Authorized Officer Of The Office; 10. Daily Collection Of Garbage And Waste Materials To Be Disposed Of; 11. Frequent Spraying Of Air Fresheners In Work Areas And Other Designated Places; 12. Washing And Cleaning Of All Windows And Glasses Either By Hands Or With The Use Of Class Wiper; 13. Cleaning Of All Light Diffusers; 14. Thorough General Cleaning Of All Areas. 15. Other Services Within The Building Which May Be Assigned By The Management From Time To Time Within The Scope Of Janitorial Services. 2. Miscellaneous Services A. To Provide Extra Manpower Or Extension Of Authorized Tour Of Duty On Christmas And Other Special Occasions And In Case Of Emergencies Or Natural Calamities Necessitating Relief Operations, A Team Of Trained Personnel Within The Authorized Work Force Shall Be Provided To Undertake Such Job Receipt Of Five (5) Days Advanced Notice; B. Provide Minor Carpentry, Electrical And Plumbing Services; C. Clerical/messengerial Services. 3. Obligations Of The Agency A. Equipment And Uniform The Agency Shall Provide Complete Uniform With Proper Identification Card To Its Employees Assigned To The Entity And Shall Also Provide Standard Carpentry Small Tools Needed For Maintenance Services Such As But Not Limited To The Following: Hammer, Saw And Tape Ruler. B. Responsibilities It Is The Responsibility Of The Agency To Provide The Entity Of The Following: 1. Qualified Employees To Perform The Assigned Tasks: 2. Reliever In Case The Assigned Employee (s) Is Absent; 3. Ensure That All Employee Assigned In The Area Shall Follow House Rules And Regulations; 4. Discipline, Supervise And Control All Employees By Following Entity’s Rules And Regulations; 5. Replacement Of Any Employee (s) Assigned At The Office; 6. Conduct Inspection; 7. Monthly Meeting Of Agency With Their Personnel And Regular Check-up/supervision In Site Of The Assigned At The Office; 8. Regular Debriefing Of Personnel Assigned At The Office; 9. Duly Signed Monthly Accomplishment Report To Be Attached To Disbursement Voucher. C. Quality Assurance And Control The Agency Shall Conduct Regular Onsite Inspection And Evaluation Of The Services Performed By The Assigned Employees To The Entity To Ensure And Keep The Quality Of Work With Highest Standard Requirement. D. Human Resource Development The Agency Shall Provide Free Semi-annual Skills Development Seminar To Its Employees Assigned To The Entity To Enhance And Improve Their In-house Driving And Cleaning Skills, Maintenance Of Equipment And Use Of New Cleaning Materials And Supplies (supplied By Entity). Also, The Agency Shall Require All Their Employees Assigned To The Entity To Wear The Proper Uniform To Appear Neat And Clean In Their Work Place. Wearing Of Id Should Always Be Observed At All Times For Proper Identification And Security Purposes. 4. Timeline/schedule Of Delivery The Selected Agency Will Ensure And Deliver The Manpower Services Of One (1) Driver And Two (2) Janitors Who Meet The Qualifications As Stated In The Items Of The General Conditions. The Personnel Shall Render An Eight (8) Hour Service A Day, Five (5) Days A Week, Including Holidays To The Csc Regional Office. The Agency Shall Ensure That A Reliever Be Deployed Immediately In Case Of Changes Or Modifications To The Duty Of Its Assigned Personnel. 5. Duration Of Contract The Contract Shall Commence From The Date Of Signing Until December 31, 2025 Or Until The Execution Of A New Contract Pursuant To Government Procurement Policy Board (gppb) Resolution No. 23-2007 Dated September 28, 2007 “approving And Adopting The Revised Guidelines On The Extension Of Contracts For General Support Services”, Subject To The Agreement Of Both Parties. 6. Terms Of Payment For And In Consideration Of The Services Rendered By The Selected Agency, Cscro Vi Shall Pay The Contract Amount On A Monthly Basis. 7. Other Conditions Mode Of Payment To The Winning Security Agency Shall Be Made Via Issuance Of Mds/commercial Checks.