Interior Tenders

Purchaser Name: Ministry Of The Presidency, Interior And Social Dialogue | Comprehensive Maintenance of the Center Building 1.1.2.

Details: The Biesenthal-Barnim office is implementing the following construction project: === Extension of the Rüdnitz fire station === As an extension to an equipment house for the purpose of strengthening the municipal fire service infrastructure on the property at Ackerweg 2 in 16321 Rüdnitz. The following construction project services are being awarded as part of this tender: == Outdoor facilities, rainwater drainage == The project is receiving funding from the state of Brandenburg in accordance with the fire service infrastructure guidelines of the Ministry of the Interior and for Local Affairs. Please refer to the tender documents for all further information and details.

Purchaser Name: Delegate Deputy Of The Presidency, Interior Government And Housing | Marble Supply Contract for Heritage Service Actions

Details: Description Republic Of The Philippines Batangas State University Batangas City Request For Quotation "procurement Of Supplies And Materials For Sinag Project To Create And Ultraviolet Photolithography" 1. The Batangas State University (batstate U) Through The Bids And Awards Committee Invites Interested Firms/supplier To Submit Quotation For The Project "procurement Of Supplies And Materials For Sinag Project To Create And Ultraviolet Photolithography" With An Approved Budget For The Contract (abc) One Hundred Eighteen Thousand Nine Hundred Twenty-five Pesos Only (php 118,925.00). Quotation Received In Excess Of The Abc Shall Be Automatically Rejected At The Opening. Item No. Qty Description Total 1 1 Piece Abs Plastic Abs Plastic Ivory Color; Dimensions: 40mmx320mmx600mm (at Least 35mmx220mmx600mm) 19,600.00 2 1 Piece Ac- Dc Converter 24v 10.5a Power Supply 4,700.00 3 1 Piece Acrylic Sheet 12mm Acrylic Sheet; Dimension: 12mm X 1220mm X 2440mm (or At Least 10mmx1220mmx1828.8mm) 20,475.00 4 1 Piece Acrylic Sheet 5mm Acrylic Sheet; Dimension: 6mm X 1220mm X 2440mm (or At Least 6mmx1000mmx1500mm) 9,750.00 5 2 Piece Anodized Black Aluminum Profile 20mmx20mm (at Least 350mm) 500.00 6 2 Piece Anodized Black Aluminum Profile 20mmx40mm (at Least 520mm) 1,630.00 7 2 Piece Arduino Mega 2560 R3 Atmega2560 Microcontroller Input Voltage : 7-12v 54 Digital I/o Pins (14 Pwm Outputs) 16 Analog Inputs 256k Flash Memory 16mhz Clock Speed 7,540.00 8 1 Piece Dc Fan 12v 0.33a, 80mm X 80mm X 25mm With At Least 3500 ±10%rpm & Noise 38.5dba 1,200.00 9 1 Pack L- Shape Interior Corner Connector Joint Bracket Dimensions:105.92 Mm X 66.04 Mm X 24.89 Mm ? For Aluminum Profile At Least 6 Pcs. 200.00 10 1 Piece Laser Diode 500mw 808nm Infrared Ir Laser Diode Dot Module 12v+ Ttl+ Fan Cooling Laser Module 1,180.00 11 4 Piece Limit Switch Micro Switch 3pin With Roller Limit Switch For X And Y Axis 360.00 12 1 Piece Linear Motion Guide With Rail Lead Sizes: At Least 105 Mm Low Dust Generation-grease (g Type) Assembly Height: 10 Mm For Z-axis 2,730.00 13 1 Piece Linear Motion Guide With Rail Lead Sizes: At Least 350 Mm Low Dust Generation-grease (g Type) Assembly Height: 10 Mm For X-axis 4,880.00 14 1 Piece Linear Motion Guide With Rail Lead Sizes: At Least 457mm Low Dust Generation-grease (g Type) Assembly Height: 10 Mm For Y-axis 5,900.00 15 1 Pack M2.5x6 Countersunk Allen Bolt Metric M2.5 Screws,thread Diameter: 2.5mm; Screw Length: 6mm; Pitch Size: 0.45mm . For Enclosure At Least 50 Pcs. 530.00 Page 1 Of 3 Item No. Qty Description Total 16 1 Pack M3x10 Counterbore Allen Bolt Thread Length: M3 X 10mm?thread Diameter: 3mm, Thread Pitch: 0.5mm, Total Length: 19 Mm Head Diameter: 5.3mm?head Height : 3mm Thread Coverage: Full Thread. At Least 60 Pcs 610.00 17 1 Pack M3x12 Counterbore Allen Bolt Thread Length: M3 X 12mm?thread Diameter: 3mm, Thread Pitch: 0.5mm, Total Length: 19 Mm Head Diameter: 5.3mm?head Height : 3mm Thread Coverage: Full Thread. At Least 60 Pcs 620.00 18 1 Pack M3x16 Counterbore Allen Bolt Thread Length: M3 X 16mm?thread Diameter: 3mm, Thread Pitch: 0.5mm, Total Length: 19 Mm Head Diameter: 5.3mm?head Height : 3mm Thread Coverage: Full Thread. At Least 60 Pcs 640.00 19 1 Pack M4x10 Counterbore Allen Bolt Thread Diameter: M4-0.7; Screw Length: 10mm; Head Size: 7.22 X 4mm / 0.28" X 0.16"(d*h); Hex Width: 3mm; Product Name: Socket Head Cap Screws; Color: Black; Material: Carbon Steel; Surface Treatment: Blackening. At Least 60pcs 690.00 20 1 Pack M4x12 Counterbore Allen Bolt Thread Diameter: 4 Mm; Pitch Size: 0.7 Mm. Thread Length: 12 Mm(excluding The Height Of The Head); Drive Type: Allen Hex Socket 3 Mm; Color: Black Oxide. At Least 60 Pcs 700.00 21 1 Pack M4x16 Counterbore Allen Bolt Thread Diameter: 4 Mm; Pitch Size: 0.7 Mm. Thread Length: 16 Mm(excluding The Height Of The Head); Drive Type: Allen Hex Socket 3 Mm; Color: Black Oxide. At Least 60 Pcs 710.00 22 1 Pack M5 T-slot Nuts Dimensions:10mmx4.5mmx9mm; Step Width 6mm, Step Height 1.5mm. For Aluminum Profile At Least 45 Pcs. 560.00 23 1 Pack M5x12 Counterbore Allen Bolt Head Diameter: 8.5 Mm; Head Height: 5 Mm; Drive Type: Allen Hex Socket 4 Mm; Color: Black Oxide. For Enclosure At Least 30 Pcs. 720.00 24 1 Pack M5x16 Counterbore Allen Bolt Head Diameter: 8.5 Mm; Head Height: 5 Mm; Drive Type: Allen Hex Socket 4 Mm; Color: Black Oxide. For Enclosure At Least 30 Pcs. 680.00 25 4 Piece Nema 23 Stepper Motor Step Angle:1.8 Deg Motor Length:56 Mm Rated Voltage:3.6 V Rated Current: 2 A Phase Resistance: 1.8 Ohms Phase Inductance: 2.5 Mh Holding Torque:9 Kg-cm No. Of Lead Wires: 6 Rotor Interia: 300 G-cm² Detent Torque: 400 G-cm Motor Weight: 0.7 Kg For X And Y Axis 5,200.00 26 3 Kilogram Polylactic Acid (pla) Matte Black/deep Black 2,910.00 27 1 Piece Precision Ball Screw Shaft Diameter: 8mm Lead Size: At Least 390 Mm Accuracy Grade: Up To C7 For X-axis 9,780.00 28 1 Piece Precision Ball Screw Shaft Diameter: 8mm Lead Size: At Least 517 Mm Accuracy Grade: Up To C7 9,990.00 Page 2 Of 3 Item No. Qty Description Total For Y-axis 29 1 Piece Shaft 8mm Shaft At Least 300mm Length 240.00 30 2 Piece Shaft Coupler 6mm To 8mm Motor Stepper Shaft 200.00 31 2 Piece Stepper Motor Controller Dm556 Model Suitable For Nema 23 5-24 V Universal To Control Signal, Without Series Resistance Ttl Compatible And Optically Isolated Inputs To 5.6a Input Voltage 20-50vdc Up To 128 Subdivision, 16 Selectable Micro-step Resolutions Of 400-25,600 Via Dip Switches 8 Selectable Output Current Settings Of 1.4a To 5.6a Via Dip Switches Pulse Input Frequency Up To 200 Khz Protections For Over-voltage And Over-current Electrical Specifications Output Peak Current: 1.4~5.6a Input Voltage: +20~50vdc (typical 24-48vdc) Pulse Input Frequency: 0~200khz Isolation Resistance: 500m? Vibration: 10-55hz/0.15mm Weight: Approx.260g For X And Y Axis 3,500.00 Note: Kindly Indicate The Brand On Your Quotation. 2. Philgeps Registration Certificate And Other Business Permits Shall Be Attached Upon Submission Of The Quotation. 3. The Quotation Must Be Submitted (can Also Be Send Thru Fax And Email At The Contact Details Listed Below) Or To The Rizal Avenue Extension, Batangas City And Shall Be Received By The Committee On Or Before 5:00 Pm Of January 13, 2025. E-mail : Procurement.central.external@g.batstate-u.edu.ph 4. The Bsu Reserves The Right To Reject Any Or All Quotations And/or Proposals And Waive Any Formalities/informalities Therein And To Accept Such Bids It May Consider As Most Advantageous To The Agency And To The Government. Batstate U Neither Assumes Any Obligation For Whatsoever Losses That May Be Incurred In The Preparation Of Bids, Nor Does It Guarantee That An Award Will Be Made. Mr. Jonas Erik L Ebora Assistant Director, Procurement Rizal Avenue Extension, Batangas City 980-0385 Loc. 1230

Description: Contact Information|4|n731.46|n00383|n/a|amanda.m.sweeney4.civ@us.navy.mil| Item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| Higher-level Contract Quality Requirement|8|x|||||||| Time Of Delivery (june 1997)|20||||||||||||||||||||| Stop-work Order (aug 1989)|1|| Wide Area Workflow Payment Instructions (jan 2023)|16|invoice And Receiving Report Combo|inspection Site Source Final Acceptance Site Source|tbd|n00383|tbd|tbd|see Schedule |tbd||||||||| Navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|| Value Engineering (jun 2020)|3|||| Equal Opportunity (sep 2016)|2||| Integrity Of Unit Prices (nov 2021)|1|| Equal Opportuity For Workers With Disabilities (jun 2020)|2||| Transportation Of Supplies By Sea (jan 2023)|2||| Buy American-free Trade Agreements-balance Of Payments Program-basic (feb 2024)|11|||||||||||| Limitation Of Liability--high-value Items (feb 1997)|1|| Offeror Representations And Certifications--commercial Products And Commercialservices (may 2024))|3|||| Alternate A, Annual Representations And Certifications (nov 2023)|13|||||||||||||| Buy American-free Trade Agreements-balance Of Payments Program Certificate-basic (feb 2024))|5|||||| Buy American--balance Of Payments Program (feb 2024)|1|| Royalty Information (apr 1984)|1|| Annual Representations And Certifications (may 2024)|12|332439|1250||||||||||| Facsimile Proposals (oct 1997)|1|| Notice Of Priority Rating For National Defense, Emergency Preparedness, Andenergy Program Use (apr 2008))|2||a8c| Evaluation--commercial Products And Commercial Services (nov 2021)|4||||| 1. This Amendment Hereby Increases The Qty Of This Solicitation By Qty 36; From Qty 150 To 186. 2. All Other Terms And Conditions Remain Unchanged. \ This Rfp Is For A Sares Buy And Will Be Using Competitive Procedures. This Requirement Will Be Awarded To The Offeror With The Lowest Price Technically Acceptable (lpta) Quote. The Small Business Administration Representative At Navsup Wss Has Reviewed This Requirement And Determined That A Set-aside Recommendation Was Not Applicable For This Procurement. This Contract/delivery Order/purchase Order/modification Is Issued By The Government When Deposited In The Mail, Transmitted By Facsimile Or Sent By Any Electronic Commerce Method, Including Email. The Government's Acceptance Of The Contractor's Proposal Constitutes Bilateral Agreement To Issue This Contract/delivery Order/purchase Order/modification. \ 1. Scope 1.1 Pre-award / Post Award Requirements: Due To The Critical Use Of This Item And Its Quality History, A Pre-award Survey And Post-award Conference May Be Required For All New Manufacturers. For All Previous Sources, A Post-award Conference May Be Recommended. 1.2 Container Shell Material Is ;plastic; . 1.3 Manufacturing Process Is ;rotomolding; . 1.4 When Discrepancies Exist Between These Requirements And Those On Current Manufacturer's Drawings,contact Code ;buyer On Page 1 Of Contract; Or Code N241.10 1.5 Articles To Be Furnished Hereunder Shall Be Manufactured, Tested And Inspected In Accordance With ;hardigg Industries, Inc.; Drawing Number ( ;11214; ) ;18334-0100; , Revision ;latest; And All Details And Specifications Referenced Therein. 1.6 Unless Expressly Provided For Elsewhere In This Clause, Equipment Such As Fixtures, Jigs, Dies, Patterns, Mylars, Special Tooling, Test Equipment, Or Any Other Manufacturing Aid Required For The Manufacture And/or Testing Of The Subject Item(s) Will Not Be Provided By The Government Or Any Other Source And Is The Sole Responsibility Of The Contractor. The Foregoing Applies Notwithstanding Any Reference To Such Equipment Or The Furnishing Thereof That May Be Contained In Any Drawing Or Referenced Specification. 1.7 If Mil-std-454 Is Referenced In The Drawings Or In The Specification, The Contractor Is Expected To Show Compliance With Ipc/eiaj-std-001c. 2. Applicable Documents Drawing Data=18334-0100 |11214| | |d| | | | 3. Requirements 3.1 One Third (1/3) Unit Of Desiccant (mil-d-3464, Type Ii Nondusting) Per Cubic Foot Of Container Interior Volume Shall Be Placed In Desiccant Holder Of Each Container At Time Of Shipment. 3.2 Reference To Cadmium Plating Shall Be Deleted And The Following Substituted: "finish Shall Be Electrodeposited Alkaline Zinc-nickel Alloy In Accordance With Astm B 841 Class 1, Type B, Grade 3." All Containers Must Be Affixed With A Nameplate That Includes A Unique Identification (uid) Marking As Referenced In The Drawing Package Drawing ;(80132) 15930; And Iaw Mil-std-130 Latest Revision. The Contractor Shall Contact Navicp Code ;0771.13; Or Code 0771.10 For The Alphanumeric Sequential Serial Number Group That Makes Up Part Of The Uid. The Uidwill Be Included On The Nameplate In Data Matrix Format. When A First Article Is Required, The Contractor Shall Submit A Paper Copy Of The Drawings (size 11" X 17"), Contracts And Approved Ecp's Eco's, Deviations Waivers, And Modifications In The Records Recepticle Or Inside The Container Submitted For The First Article. Contact Code ;contact Buyer On Page 1 Of Contract; Or Code N241.10 To Arrange For First Article Test Location 4. Quality Assurance 4.1 The Tests To Be Performed Under The First Article Approval Clause (far 52.209-4) Of The Contract Are Listed Below. 4.1.1 Dimensional Test (special) ;iaw Drawing (11214) 18334-0100 And Subdrawings Is Applicable; 4.1.2 Requirements Of: ;iaw Drawing (11214) 18334-0100 And Subdrawings Is Applicable; 4.1.3 Form: ;applies; 4.1.4 Fit: ;applies, Use Actual Item; 4.1.5 Function ;applies; 4.1.6 Compliance With Drawing ( ;11214; ) ;18334-0100; , Revision ;latest; And Specifications Referenced Therein. 4.2 In Addition To The Above Tests, The First Article(s) To Be Delivered Hereunder Shall Also Be Subjected To Those Tests Which Will Demonstrate That The Article(s) Comply With Contract Requirements Requirements. 4.3 The Contractor Shall Be Responsible For Providing The Necessary Parts And Repair Of The First Article Sample(s) During Testing. 4.4 The Cost Of The Government Testing Effort Set Forth In This Solicitation Is Estimated To Be $ ;10,000; For The First Article Testing. This Cost Factor Will Be Added, For Solicitation Purposes, To The Price Of All Offerors For Whom The Government Will Require Such Testing. 4.5 Disposition Of Fat Samples 4.5.1 ;zero; Sample(s) Shall Not Be Returned To The Contractor Because They Shall Be Destroyed During Testing. 4.5.2 ;all; Unless Otherwise Provided For In The Contract, Sample(s) Shall Be Returned To The Contractor And May Be Considered As Production Items Under The Contract Provided The Sample(s) Can Be Refurbished To Ready For Issue Condition And Provided The Sample(s) Have Inspection Approval From The Cognizant Dcmc Qar. Sample(s) May Be Shipped As Production Items Only After All Other Units Required Under The Contract Have Been Produced And Are Ready For Shipment. ;n/a; Sample(s) Shall Be Returned To The Contractor But Shall Not Be Considered As Production Due. 4.6 Test Sample Coating Instructions 4.6.1 Samples Are To Be Unpainted. Corrosive Areas Are To Be Coated With A Light Preservative.this Paragraph Does Not Apply To Shipping Containers. 4.7 Fat Approval Criteria 4.7.1 Far 52.209-4 Applies (a) The Contractors Shall Deliver ;one (1); ; Unit(s) Of The Following Cage ( ;11214; ; ) Part Number ;18334-0100; ; , Revision ;latest; ; Within ;120; ; Calendar Days From The Date Of This Contract To The Government At ;contact Buyer On Page 1 Of Contract; ; Marking Of Test Sample(s) Shipping Container Shall Be As Follows, Citing This Contract Number: "for First Article Testing. Not Rfi Material. Do Not Take Up In Stock Contract Number:____________" For First Article Test, The Shipping Documentation Shall Contain This Contract Number And Lot/item Identification. The Characteristics That The First Article Must Meet And The Testing Requirements Are Specified Elsewhere In This Contract. (b) Upon Shipment Of First Article Sample(s), Two (2) Copies Of The Material Inspection And Receiving Report (dd Form 250) Bearing The Qar's Signature And Indication Of Preliminary Inspection Shall Be Forwarded To The Navicp- Philadelphia Code Cited In Block 10.a Of Sf33, With Duplicate Copies To Navicp Code 072 And To The Designated Test Facility. The Envelopes Shall Be Clearly Marked: "do Not Open In Mail Room". Within ;90; ; Days After Receipt Of The Samples, The Test Site Shall Complete Testing/evaluation And Submit Two (2) Copies Of Their Test Report With Conclusions And Recommendations To The Navicp Code Cited In Block 10.a Of The Sf33. (c) Within ;30; ; Calendar Days After The Government Receives The First Article, The Contracting Officer Shall Notify The Contractor, In Writing, Of The Approval, Conditional Approval, Or Disapproval Of The First Article. The Notice Of Approval, Conditional Approval, Or Disapproval Shall Not Relieve The Contractor From Complying With All Requirements Of The Specifications And All Other Terms And Conditions Of This Contract. A Notice Of Conditional Approval Shall State Any Further Action Required Of The Contractor. A Notice Of Disapproval Shall Cite Reasons For Disapproval. (d) If The First Article Is Disapproved, The Contractor, Upon Government Request, Shall Submit An Additional First Article For Testing. After Each Request, The Contractor Shall Make Any Necessary Changes, Modifications, Or Repairs To The First Article Or Select Another First Article For Testing. All Costs Related To These Tests Are To Be Borne By The Contractor, Including Any And All Costs For Additional Tests Following A Disapproval. The Contractor Shall Furnish Any Additional First Article To The Government Under The Terms And Conditions And Within The Time Specified By The Government. The Government Shall Act On This First Article Within The Time Limit Specified In Paragraph (b) Above. The Government Reserves The Right To Require An Equitable Adjustment Of The Contract Price For Any Extension Of The Delivery Schedule Or For Any Additional Costs To The Government Related To These Tests. (e) If The Contractor Fails To Deliver Any First Article On Time, Or The Contracting Officer Disapproves Any First Article, The Contractor Shall Be Deemed To Have Failed To Make Delivery Within The Meaning Of The Default Clause Of This Contract (f) Unless Otherwise Provided In The Contract, The Contractor - (1) May Deliver The Approved First Article As Part Of The Contract Quantity, Provided It Meets All Contract Requirements For Acceptance And Was Not Consumed Or Destroyed In Testing: And (2) Shall Remove And Dispose Of Any First Article From The Government Test Facility At The Contractors Expense. (g) If The Government Does Not Act Within The Time Specified In Paragraph (b) Or (c) Above The Contracting Officer Shall, Upon Timely Written Request From The Contractor, Equitably Adjust Under The Changes Clause Of This Contract The Delivery Or Performance Dates And/or The Contract Price, And Any Other Contractual Term Affected By The Delay. (h) The Contractor Is Responsible For Providing Operating And Maintenance Instructions, Spare Parts Support, And Repair Of The First Article During Any First Article Test. (i) Before First Article Approval, The Acquisition Of Materials Or Components For, Or The Commencement Of Production Of, The Balance Of The Contract Quantity Is At The Sole Risk Of The Contractor. Before First Article Approval, The Costs Thereof Shall Not Be Allocable To This Contract For (1) Progress Payments, Or (2) Termination Settlements If The Contract Is Terminated For The Convenience Of The Government (j) The Contractor Shall Produce Both The First Article And The Production Quantity At The Same Facility And Shall Submit A Certification To This Effect With Each First Article. (k) The Contractor Shall Provide Specific Written Notification To The Procuring Contracting Officer Informing Him/her Of The Shipment Of Any Article(s) Furnished In Accordance With This Clause. Such Notification Must Be Addressed To The Attention Of The Navicp Code Specified In Block 10.a Of The Sf33, With Copies To Navicp Code 072 And To The Testing Activity. Failure To Provide Such Notification Shall Excuse The Government From Any Delay In Performing First Article Testing And Informing The Contractor Of The Results Thereof. (l) Fourteen (14) Days Prior To Shipment Of First Article Samples, The Contractor Shall Notify The Designated Test Facility In Writing Of The Anticipated Shipping Date, With An Information Copy To The Pco, Navicp Philadelphia, Attn: (cite Code Found In Block 10.a Of The Sf33). The Contractor Shall Also Arrange For Preliminary Inspection Of Test Samples By The Dcmc/qar. 4.8 Alternate Offers - Waiver Of First Article Approval Requirements. (the Following Provisions Supersede Any Waiver Of First Article Approval Requirements Terms Set Forth In Clause 52.209-3 Or 52.209-4 As Appropriate) (a) Unless Otherwise Specified In The Solicitation, The Naval Inventory Control Point Reserves The Right To Waive The First Article Approval Requirements Specified Herein For Offerors Who Have Previously Furnished Identical Production Articles Accepted By The Government Or The Original Equipment Manufacturer/prime Manufacturer. An Offeror Requesting Waiver Of First Article Requirements Shall Submit Evidence With Its Offer Establishing That: (i) The Last Production Unit Was Delivered Within Three (3) Years Of The Issue Date Of This Solicitation, And (ii) The Production Location To Be Used For This Requirement Is The Same As Used For The Previous Production Run Additionally, The Offeror Shall Submit A Certification, To Be Executed By The Officer Or Employee For The Offer, Stating That: (i) The Articles To Be Provided Will Be Produced Using The Same Facilities, Processes, Sequences Of Operations And Approved Subcontractors As Those Previously Delivered And Accepted By The Government Or The Original Equipment Manufacturer/prime Manufacturer, And (ii) The Previous Production Units Were Manufactured Without Material Review Board Disposition Or Waiver/deviation Request Or Rejection Of Pre-production Samples For Cause. (note: This Certification Concerns A Matter Within The Jurisdiction Of An Agency Of The United States And The Making Of A False, Fictitious, Or Fraudulent Certification May Render The Maker Subject To Prosecution Under Title 18, United States Code, Section 1001.) (b) Offerors Requesting Waiver Of First Article Approval Requirements Under The Provisions Of This Clause Are Cautioned To Submit Two Prices For Articles Required Herein - One That Is Based On Compliance With The First Article Approval Requirements And One That Is Based On A Waiver Of Such Requirements. Where An Offeror Submits Only One Price And Fails To Clearly State That The Price Is Based On Waiver Of The First Article Approval Requirements It Will Be Deemed To Be Based On Compliance With The First Article Approval Requirements (c) In The Event Of The First Article Approval Requirement Is Granted, The Delivery Schedule For The Production Items Shall Be Reduced By The Number Of Days Designated For Delivery Of First Article Test Unit Plus The Number Of Calendar Days Indicated For The Government Notification Of Conditional Approval Or Approval. These Requirements Are Specified In The Quality Assurance Section Of This Solicitation. If The Offeror Is Unable To Meet The Desired Schedule, He Shall Insert Below The Alternate Delivery Schedule He Offers To The Government. Offeror's Proposed Alternate Delivery Schedule (based On Waiver Of First Article Approval Requirements) Within Days: Item No. _______________ Quantity:_______ After Date Of Contract:__________ Sampling Per Ansi/asq Z1.4, Sample Plan S-2aql 1.0 (13 Pcs) Accept 0, Reject 1.one (1) Rejection Will Require 100% Of The Shipment To Be Tested. A Lot Shall Consist Of Any Scheduled Shipment Quantity Under Contract. Representative Sampling Shall Be Used, I.e. The Samples Are To Be Selected At Random Throughout The Lot.remove Either The Vortex Or Breather Valve And Install A Suitable Airtight Fitting.draw A Vacuum On The Sample Container(s) To .025+/- 0.01 Psig.stabilize Vacuum Within Tolerance For A Minimum Of 15 Minutes, Then Disconnect The Vacuum Input And Test Monitor The Container For 15 Minutes.the Vacuum Should Hold Within +/- 0.05 Psig At The End Of The 15 Minutes For The Container To Pass. Testing Specifications For Cases: Drop Test:fed-std-101c. Method 5007.1 Paragraph 6.3,procedure -a- Level -a-. Procedure A Falling Dart Impact: Ata 300, Category I,general Requirements For Category I & Ii Reusable Containers Vibration (loose Cargo): Fed-std-101c, Method Of 5019 Vibration (sweep):ata300, (jan 15th/96),which States In Appendix Ii, B4 Simulated Method 506.4, Procedure Ii Of 4.1.2 Fed-std-101c Method 5009.1, Section 6.7.1. All Costs And Responsibilities Related To The First Article Test Submission Container Shipment To And From The First Article Test Facility Are To Be Borne By The Contractor. 4.9 100% Production Leak Test. Each Container Shall Be Prepared For Testing By Sealing All Breathing Devices And Inserting Suitable Pressurized Fittings And Gauges. The Container Shall Be Closed And Sealed In A Normal Manner. Each Container, Uninstrumented And Without Dummy Load, Shall Then Be Subjected To A Single 18 Inch Flat Drop. The Pneumatic-pressure Technique Of Method 5008 Of Federal Test Method Standard No. 101c Shall Be Used To Detect Leakage. An Initial Setting Equal To 0.5 + 0.1 - 0 Psig Shall Be Used. After Stabilization, Pressure Shall Be Monitored For Thirty Minutes. Any Loss In Pressure Over A 30 Minute Period That Exceeds 25% Of The Stabilized Pressure Shall Be Cause For Rejection; Tests Shall Be Conducted To Ascertain Sources Of Leaks And Corrective Action Taken. Any Deformation Of The Container Shell While Pressurized Which Is Greater Than Three-quarters Of An Inch Beyond Its Point At Ambient Pressure Shall Also Be Cause For Rejection. Warning Container May Explode Or Fasteners May Fail During Test. Use Protective Barriers To Avoid Injury To Personnel. 4.10 100% Production Leak Tests. Each Container Shall Be Prepared For Testing By Sealing All Breathing Devices And Inserting Pressurizing Fittings And Gauges. The Container Shall Be Closed And Sealed In A Normal Manner. The Pneumatic - Pressure Technique Of Method 5009 Of Federal Test Method Standard No. 101c Shall Be Used To Detect Leakage. An Initial Pressure Setting Equal To 0.25 + 0.1-0 Psig Shall Be Used. After Stabilization, Pressure Shall Be Monitored For Thirty Minutes. Any Loss In Pressure In Excess Of 0.05 Psig (adjusted For Changes In Temperature And Barometric Pressure) Shall Be Cause For Rejection. Any Deformation Of The Container Shell, While Pressurized, Which Is Greater Than Three Quarters Of An Inch Beyond Its Point At Ambient Pressure Shall Also Be Cause For Rejection. 5. Packaging- Mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes - Not Applicable

Details: Modification 2 (12/12/2024) the Original Advertisement Dated 01/04/2024 And Modified On 12/03/2024, Is Hereby Modified To Extend The Due Time And Date For Expressions Of Interest From4:30 Pm Eastern, Tuesday, December 10, 2024 To 4:30 Pm Eastern, Wednesday, January 8, 2025. all Other Aspects Of The Original Advertisement And 12/03/2024 Modification Remain Unchanged From Its Original Intent. modification 1 (12/03/2024) the Original Advertisement Dated 01/04/2024, Here Herby Deleted In Its Entirety And Replaced With The Following To: update The Presolicitation Reference Number clarify Government, Producer/visitor And Employee Parking Requirements add Ti Pre-award Dids To Ti Methodology clarify And Add Specifications To Additional Requirements, Including Modifying Minimal Floodplain Requirements. add Language Regardingsection 889 Of The Fy19 National Defense Authorization Act (ndaa) extend The Expressions Of Interest (eoi) Due Time And Date. remove Hidden Text Language Inserted In Error. add Language Regarding Systems For Award Management (sam) Registration Requirements. insert Additional Language And/or Clarification For Expressions Of Interest (eoi Response Guidance, Instructions And Requirements. inserted Additional Language And/or Clarification For Eoi Submission. remove Previous Usda Reality Specialist Name And Contact Information. ||denotes A Change Or Modification From The Original Advertisement Dated 01/04/2024. the U.s. Department Of Agriculture (usda) Seeks To Lease The Following Space: || Presolicitation Number:57-42085-25-fa state: Pennsylvania city: Mercer county: Mercer County delineated Area: north: Beginning At Lake Road/ West Corell Road/ East Cornell Road (township Road 539), Franklin Road, (us Route 62 (us 62)), Ending At Interstate Highway 79 (i-79). east: Beginning At Interstate Highway 79 (i-79) Ending At Leesburg Grove City Road (pa State Route 258 (pa 58)). south: Beginning At Leesburg Grove City Road (pa State Route 258 (pa 258)) Continuing Westbound To Leesburg Grove City Road (pa State Route 208 (pa 208) To The Mercer County Line To The Intersection Of The Mercer County Line And North Market Street (pa State Route 158 (pa 158)). west: Beginning At The Intersection Of The Mercer County Line And North Market Street (pa State Route 158 (pa 158)) Continue Mercer-new Wilmington Road/shenango Street* (pa State Route 158 (pa 158)), West Market Street/sharon Mercer Road (u.s. Route 62 (us 62)), Skyline Drive, South Lake Road (pa State Route 258 (pa 258)), North Skyline Drive, Ending At Lake Road (township Road 539). minimum Sq. Ft. (aboa):3,632 Aboa Sf Minimum maximum Sq. Ft. (aboa):3,813 Aboa Sf Maximum maximum Sq. Ft. (rsf):not To Exceed 4,358 Rsf space Type:general Purpose Office And Related Space ||government Official Vehicle (gov)surface/outside Reserved Parking Spaces: Three (3) Reserved, On-site Surface Parking Spaces For Government Official Vehicles (govs) Owned Or Leased On Behalf Of The Government Or Privately Owned Vehicles Designated For "official Use" In Performance Of The Government's Mission. || Producer/ Visitor Surface/ Outside Reserved Parking Spaces: Twelve (12) On-site Surface Parking Spaces For Privately Owned Producer And/or Visitor Parking. The Parking Lot Shall Have Pull-through Capabilities And Shall Not Be Obstructed By Adjacent Building(s), Structure(s), And/or Tenants’ Usage. Parking Shall Be Within A Maximum Walking Distance Of 300-feet Of The Public Entrance Of The Building. Two (2) Of The Producer/visitor Surface Parking Spaces Shall Be Large Enough To Accommodate Large, Oversized, Farm-type Vehicles With Trailers. The Spaces Should Be In Addition To The Pull-through Parking Requirements. ||employee Surface/ Outside Non-reserved Parking Spaces:twelve (12) Non-reserved Parking Spaces For Privately Owned Government Employee Use. These Parking Spaces Shall Either Be “on-site” Or “off-site” Not Exceeding A Walkable ¼ Mile (1,320 Feet) Of The Employee Entrance Of The Building. full Term:up To Twenty (20) Years (240-months) firm Term:ten (10) Years (120-months) termination Rights:120-days In Whole Or In Part Following The Expiration Of The Firm Lease Term. ||tenant Improvements: Pre-award Design Intent Drawing (dids) Workshop; Turnkey Tenant Improvement Build-out. ||additional Requirements: ||square Feet May Reflect Non-usda Partners Where Nrcs Provides Workspace To Partners Through Agreement. the Space Offered, Its Location, And Its Surrounding Areas Must Be Compatible With The Government’s Intended Use. the Space Shall Be In A Professional Office Environment Or Surroundings With A Prevalence For Modern Design And/or Tasteful Rehabilitation In Modern Use. the Space Offered Shall Not Be Located Within 300-feet Of Residential Areas. the Space Offered Will Not Be Considered Where Any Living Quarters Are Located Within The Building. space Shall Not Be Adjacent To A Tenant Or Business Whose Primary Operation Is The Sale Of Alcoholic Beverages, Where Firearms Are Sold And/or Discharged, Or Where Tenants Related To Drug Treatment, Or Detention Facilities Are Located. subleases Are Not Acceptable. first Floor Space Is Preferred. Office Space Must Be Contiguous, On One Floor. If Space Offered Is Above The Ground Level, Then At Least One (1) Accessible Elevator Will Be Required. the Government Will Have Access To The Space 24-hours A Day, 7-days A Week. Normal Hours Of Operation Are Monday Through Friday 6:00 Am – 6:00 Pm (excluding Saturdays, Sundays, And Federal Holidays). offered Space Must Meet Government Requirements For Fire Safety, Accessibility, Seismic, And Sustainability Standards Per The Terms Of The Lease. a Fully-serviced Lease Is Required. ||offered Space Shall Not Be In The 0.2-percent-annual Chance Floodplain (formerly Referred To As “500-year” Floodplain). ||entities Are Advised To Familiarize Themselves With The Telecommunications Prohibitions Outlined Under Section 889 Of The Fy19 National Defense Authorization Act (ndaa), As Implemented By The Federal Acquisition Regulation (far).).for More Information, Visit:https://acquisition.gov/far-case-2019-009/889_part_b. || Expressions Of Interest Due: 4:30 Pm Eastern, Tuesday, December 10, 2024 market Survey (estimated): Tbd occupancy (estimated):within 90-days Of The Government’s Issuance Of Notice To Proceed For Tenant Improvement Construction. note: Entities Not Currently Registered In The System For Award Management (sam) At Sam.gov, Are Advised To Start The Registration Process As Soon As Possible If Intending To Submit An Offer For Possible Lease Award. ||expressions Of Interest Shall Include The Following: ||refer To Project Number57-42085-25-fain Expressions Of Interest Response. ||if Offeror Is Not The Owner Of The Building, An Authorization Letter Signed By Owner To Represent Owner For Property Will Be Required.* ||brokers Submitting Properties Must Show Authorization From The Property Owner To Submit Property On Behalf Of The Property Owner; This Can Include, But Is Not Limited To A Listing Agreement, Letter From The Property Owner Authorizing The Broker To Submit The Property, Purchase/ Sale Agreement, Option, Etc.* ||photos Of The Space Or Site Being Submitted, Or Permission For Market Survey Participants To Photograph The Space Or Site. ||forexisting Buildings, Download From Sam.gov And Completein Its Entirety Lease Market Survey Form For Existing Building, Ms-2991. ||ifexisting Building, Include Building Name And Legal Address (as Reflected On Deed), The Location Of Available Space Within The Building, Along With Building Site/ Lot Plans, Interior Layout Drawings/ Pictures (with Dimensions Shown) Reflecting The Space(s) That Are Being Offered. ||fornew Constructionproperties, Where A Land Site Is Proposed, Download From Sam.gov And Complete N Its Entirety The Land Market Survey Form I. ||ifnew Construction, Site/aerial Plans Or Building Site/lot Plans Showing The Location Of The Proposal Land, Along With The Parcel Number (if Part Of Multiple Parcels, All Parcel Numbers Associated With The Proposed Land). Adjacent Streets Showing Proposed Ingress/egress Shall Be Shown On The Plans. ||forbothexisting Buildings And New Construction, Rentable Square Feet (rsf) And Ansi/boma Office Area (aboa) Square Feet To Be Offered. ||forbothexisting Buildings And New Construction, Proposed Fully-served Rate Per Square Foot, Estimated Operating Expenses – Fully Serviced, And Any Proposed Concessions, Free Rent, Or Abatement That May Be Included In Your Proposal. ||forbothexisting Buildings And New Construction, Amount Of/type Of Parking Available On-site. If Parking Is Not Available On-site, Provide A Map Showing The Location(s) Of Parking Requested In The Advertisement. If Parking Will Be Offered On A Land/site/property/location Not Under The Offeror’s Control, An Authorization Letter Signed By The Land/site/property/location Owner To Present The Land/site/property/location To The Government As An Expression Of Interest Will Be Required. ||forbothexisting Buildings And New Construction, The Date Of Space Availability. ||for Existing Buildings, Provide Information On Condition Of Building Systems, Roof, Foundation, And Current Floor Plan. Alternatively, Provide A Copy Of A Recent Commercial Building Inspection Or Appraisal. ||confirmation That Offered Space Meets Or Will Be Made To Meet Architectural Barriers Act Accessibility Standards (abaas). ||confirmation That Offered Space Meets Or Will Be Made To Meet Seismic Safety Standards, As Applicable. ||confirmation That Offered Space Meets Or Will Be Made To Meet Fire Protection & Life Safety Requirements. ||for New Construction Or Properties Requiring Expansion Of The Footprint Of The Building, Confirmation That Offered Space Meets Or Will Be Made To Meet National Environmental Protection Act Of 1969 (nepa) Requirements. ||* As Mentioned In #2 & #3 Above, Any Submission Received Without Written Authorization To Represent Owner(s) Will Not Be Considered Until Such Time The Documentation Has Been Received.in Cases Where An Agent Is Representing Multiple Entities, Written Acknowledgement/permission From Each Entity To Represent Multiple Interest Parties For The Same Submission Must Be Submitted Prior To The Expressions Of Interest Due Date. send Expressions Of Interest To ||in No Event Shall An Offeror, Owner, Or Their Representatives And/or Designees, Enter Into Negotiations Or Discussions Concerning The Space To Be Leased With Any Federal Agency Other Than The U.s. Department Of Agriculture Contracting Officer Or Their Authorized Representative Indicated Below: name/title:shannon Schoening, Usda Contracting Officer email Address:shannon.schoening@usda.gov government Contact Information name/title:shannon Schoening, Usda Contracting Officer email Address:shannon.schoening@usda.gov ------------------------------------------------------------------------------------------ sam Advertisement (01/04/2024) presolicitation#57-42085-24-fa Is Hereby Deleted In Its Entirety And Replaced By Sam Advertisement Modification No. 1 (12/03/2024).

Details: - Earthworks (excavation pits, pipe trenches), drainage work (underground pipes, infiltration trenches) - Underpinning of neighboring buildings, concrete and reinforced concrete work (cellar walls, under/overlays, ring beams, ceilings, balconies and arcades, stairs) - Masonry work (load-bearing masonry made of sand-lime brick, non-load-bearing masonry made of aerated concrete in new buildings, selective interventions in existing buildings) - Insulation and sealing of underground and adjacent components - Demolition work (window parapets, interior walls, selective ceilings and stairs) - Disposal of hazardous substances

Purchaser Name: Undersecretary Department Of Justice And Interior Of The Generalitat Valenciana | Spain – Various Office Equipment And Supplies – Suministro Material De Oficina No Inventariable A Los Órganos Judiciales, Fiscalías, Registros Civiles E Institutos De Medicina Legal Y Ciencias Forenses De La Comunitat Valenciana No Contemplado En El Am 3/23 Cc Para El "suministro De Material De Oficina E Informático No Inventariable A La Administración De La Generalitat, Su Sector Público Instrumental Y Entidades Adheridas."

Purchaser Name: Sivas Provincial Police Department MINISTRY OF INTERIOR SECURITY GENERAL DIRECTORATE | Sivas Provincial Police Department Special Operations Branch Directorate 2025 Catering

Purchaser Name: State Medical Institute Of The Ministry Of The Interior And Administration | Poland – Computer-related Equipment – Dostawa Sprzętu Komputerowego Wraz Z Instalacją