Interior Tenders

Details: Description Republic Of The Philippines Batangas State University Batangas City Request For Quotation "procurement Of Materials For The Improvement Of Red Spartan Digital Printing Hub Location" 1. The Batangas State University (batstate U) Through The Bids And Awards Committee Invites Interested Firms/supplier To Submit Quotation For The Project "procurement Of Materials For The Improvement Of Red Spartan Digital Printing Hub Location" With An Approved Budget For The Contract (abc) Two Hundred Thirty-three Thousand Two Hundred Seventy Pesos And Fifty-nine Centavos Only (php 233,270.59). Quotation Received In Excess Of The Abc Shall Be Automatically Rejected At The Opening. Item No. Qty Description Total 1 711 Piece 1" Fiber Cement Board Screw 497.70 2 250 Piece 1" Gypsum Screw 157.50 3 2 Piece 1-gang Switch, 10a, 240v W/ Plate & Cover 308.00 4 7 Piece 12mm Thk. X 4' X 8' Gypsum Board 5,731.25 5 10 Piece 2" Paint Brush 826.00 6 2 Piece 2" X 250' Mesh Tape 375.00 7 6 Piece 2" X 250' Mesh Tape 750.00 8 1 Piece 2-gang Switch, 10a, 240v W/ Plate & Cover 266.00 9 7 Set 2x20w, 2000 Lumens, Led Batten Light, Surface Mounted 18,326.00 10 9 Piece 3/4" Thick X 4'x8'x (24kg) Marine Type Plywood 20,790.00 11 30 Piece 35mm X 76mm X 0.50mm X 3m Metal Studs 5,625.00 12 20 Piece 35mm X 76mm X 0.50mm X 3m Metal Track 3,750.00 13 2 Piece 4 Pin Industrial Socket 3p 2,520.00 14 10 Piece 4" Roller Brush With Handle 630.00 15 20 Piece 4.5mm Thk. X 4' X 8' Fiber Cement Board 15,850.00 16 4 Piece 4in X 4in X 3mm Ball Bearing Hinges 1,750.00 17 1 Piece 60at 3p Cb (tapping Point) 7,140.00 18 1 Lot Assorted Fittings 2,800.00 19 4 Piece C-channel 1mm X 12mm X 38mm X 5m 1,042.96 20 1 Bag Cement 295.00 21 3 Kilogram Common Wire Nail Asstd 378.00 22 45 Meter Copper Wire 14.0mm² Thhn/thwn 6,306.30 23 195 Meter Copper Wire 3.5mm² Thhn/thwn 7,495.80 24 29 Meter Copper Wire 5.5mm² Thhn/thwn 1,705.78 25 29 Meter Copper Wire 8.0mm² Thwn/thhn 2,668.58 26 8 Piece Duplex Receptacle, Universal Type With Grounding Slot, 16a, 240v, (wall-mounted, Ceiling Mounted) 1,456.00 27 1 Piece Door 0.80m X 2.10m Mdf Interior Door With Jamb 7,500.00 28 1 Piece Door 0.80m X 2.10m X 1/2" Thk. Clear Tempered Glass In Top And Bottom Frame With Stainless Door Handle And Complete Accessories And Frosted Sticker 13,557.60 29 1 Piece Door Lock Set Door Lock Set - Cylindrical 475.00 30 10 Piece Double Furring 0.50mm X 19mm X 5m 2,187.50 31 15 Piece Emt Pipe, 32mmø (1"ø), Thick Wall 17,715.60 32 5 Roll Electrical Plastic Tape, Big (flame Retardant) 350.00 33 65 Piece Emt Pipe, 15mmø (½"ø), Thick Wall 22,759.10 34 11 Piece Emt Pipe, 25mmø (½"ø), Thick Wall 8,105.57 35 3 Liter Flat Enamel 918.75 36 4 Liter Flat Latex 1,035.00 37 1 Gallon Glazing Putty 923.75 38 2 Gallon Gypsum Putty (4 Ltrs.) 850.00 39 4 Gallon Latex Top Coat 3,150.00 40 5 Liter Latex Top Coat 1,375.00 Page 1 Of 2 Item No. Qty Description Total 41 1 Assembly Mdp 28,583.10 42 1 Lot Other Supports & Fittings/hardware Needed Not Mentioned Above 1,400.00 43 2.5 Gallon Primer 2,093.75 44 3 Liter Primer 817.50 45 6 Liter Putty 1,387.50 46 4 Liter Quick Drying Enamel 1,035.00 47 5 Kilogram Rags/newspaper 218.75 48 0.1 Cubic Meter Sand 0.10 Cu. M. 147.50 49 60 Piece Sand Paper For Wood And Drywalls 1,125.00 50 11 Piece Suspension Clip With Rod Joiner 1,691.25 51 3 Liter Thinner 600.00 52 22 Piece W-clip (double) 137.50 53 10 Piece Wall Angle 50mm X 25mm X 3m 625.00 54 4 Gallon Wood Glue 1,456.00 55 3 Liter Wood Prime 825.00 56 7 Set Μpvc Junction Box With Cover, 4" Orange Octagonal 274.40 57 13 Set Μpvc Utility Box, 2"x4" Orange 509.60 Note: Kindly Indicate The Brand On Your Quotation. 2. Philgeps Registration Certificate And Other Business Permits Shall Be Attached Upon Submission Of The Quotation. 3. The Quotation Must Be Submitted (can Also Be Send Thru Fax And Email At The Contact Details Listed Below) Or To The Rizal Avenue Extension, Batangas City And Shall Be Received By The Committee On Or Before 5:00 Pm Of January 08, 2025. E-mail : Procurement.central.external@g.batstate-u.edu.ph 4. The Bsu Reserves The Right To Reject Any Or All Quotations And/or Proposals And Waive Any Formalities/informalities Therein And To Accept Such Bids It May Consider As Most Advantageous To The Agency And To The Government. Batstate U Neither Assumes Any Obligation For Whatsoever Losses That May Be Incurred In The Preparation Of Bids, Nor Does It Guarantee That An Award Will Be Made. Mr. Jonas Erik L Ebora Assistant Director, Procurement Rizal Avenue Extension, Batangas City 980-0385 Loc. 1230

Details: This Is A Sources Sought Synopsis Announcement, A Market Survey For Information To Be Used For Preliminary Planning Purposes. The Information Received Will Be Used Within The Navy To Facilitate The Decision Making Process And Will Not Be Disclosed Outside Of The Agency. The Intent Of This Sources Sought Synopsis Is To Identify Potential Qualified Small Businesses, U.s. Small Business Administration (sba) Certified 8(a) Businesses, Sba Certified Hubzone Small Businesses, Women-owned Small Businesses, And/or Service-disabled Veteran-owned Small Businesses. this Sources Sought Synopsis Is One Facet In The Government’s Overall Market Research In Regards To Whether The Proposed Solicitation Will Be Issued As A Competitive Set-aside Or As Full And Open (unrestricted). No Procurement Strategy Will Be Determined Based Solely On The Information Received In Response To This Sources Sought Synopsis. no Reimbursement Will Be Made For Any Costs Associated With Providing Information In Response To This Announcement Or Any Follow-up Information Requests. This Notice Does Not Constitute A Request For Proposal And Is Not To Be Construed As A Commitment By The Government For Any Purpose Other Than Market Research. Respondents Will Not Be Notified Of The Results Of This Market Research. naval Facilities Engineering Systems Command (navfac) Southwest Is Seeking Small Business, Sba Certified 8(a) Business, Sba Certified Hubzone Small Business, Women-owned Small Business, And/or Service-disabled Veteran-owned Small Business Sources With Current And Relevant Experience, Personnel, And Capability To Perform A Multiple Award Construction Contract For New Construction, Repair, And Renovation Of Commercial And Institutional Buildings Using Acm At Various Government Installations Located In California, Nevada, Arizona, Colorado, Utah, And New Mexico. However, It Is Anticipated That Most Projects Will Be Performed In The State Of California. the North American Industry Classification System (naics) Code Is 236220 (commercial And Institutional Building Construction) With A Small Business Size Standard Of $45 Million. Task Orders Issued Under The Proposed Multiple Award Contract(s) Will Be Performed At Various Government Installations Within The Area Of Responsibility (aor) Of Naval Facilities Engineering Systems Command Southwest Including, But Not Limited To, California, Arizona, Nevada, Utah, Colorado, And New Mexico. However, It Is Anticipated That Most Projects Will Be Performed In The State Of California. The Proposed Contract(s) Will Be For One (1) Base Period Of Two (2) Years And Three (3) Option Periods Of One (1) Year, Resulting In The Contract Performance Period Maximum Of Five (5) Years. The Estimated Total Contract Price For The Base Period And One Option Period For All Contracts Combined Is $1,500,000,000. The Task Order Range Is Estimated Between $15,000,000 And $150,000,000. projects Will Be Design-build For New Construction, Repair, And Renovation Of Commercial And Institutional Buildings Using Alternate Construction Methods (acm). Examples Of Acm May Include, But Are Not Limited To: Modular Units, Pre-fabricated And Pre-engineered Structures, Tension Fabric Structures, Tilt-up Walls, And Interior Modular Systems. Projects May Include, But Are Not Limited To: Airport Building, Office/administrative Building, Communications Facility, Vehicle Maintenance Facility, Armories, Parking Garage (paved Parking Lots Will Not Be Considered Relevant), Barracks Facility, Prison Facility, Fire Station, Dining Facility, Hospital/medical Facilities, Warehouse Facility, School Facility, Child Care Facility, And/or Retail Facility. For This Announcement, New Construction And/or Repair Of Single Family Homes Will Not Be Considered Relevant. interested Sources Are Invited To Respond To This Sources Sought Announcement By Using The Form Provided Under Separate File Titled “sources Sought Information Form”. The Following Information Shall Be Provided: 1) Contractor Information: Provide Your Firm’s Contact Information, Including Uei Number And Cage Code. 2) Type Of Business: Identify Whether Your Firm Is A Small Business, Sba Certified 8(a), Sba Certified Hubzone, Service-disabled Veteran-owned, And/or Women-owned Small Business Concern. For More Information On The Definitions Or Requirements For These Small Business Programs, Refer To Http://www.sba.gov/. 3) Bonding Capacity: Provide Your Surety’s Name, Your Maximum Bonding Capacity Per Project, And Your Aggregate Maximum Bonding Capacity. 4) Locations: Identify The Locations In Which You Are Willing And Capable To Work. 5) Experience: Submit A Minimum Of Three (3) And Maximum Of Five (5) Recent Specific Government Or Commercial Projects Your Firm Has Performed To Demonstrate Your Experience In The Construction, Repair, Or Renovation Of Commercial And Institutional Buildings Using Acm And Design-build As Indicated In This Announcement. A Specific Project Is A Single Project Or A Single Task Order Under An Indefinite Quantity Contract Or On-call Type Contract. “recent” Is Defined As Having Been 100% Completed Within The Seven (7) Years Prior To The Sources Sought Synopsis Issuance Date. All Projects Shall Have A Minimum Construction Cost Of $15,000,000. Projects Which Do Not Meet These Requirements May Not Be Considered Relevant. additional Submission Requirements: at Least One (1) Relevant Project With A Construction Cost Of $50,000,000 Or Above. at Least One (1) Relevant Project Demonstrating Experience With The New Construction Or Repair Of An Aircraft Hangar Or Vehicle Maintenance Facility. for Each Of The Projects Submitted For Experience Evaluation, Provide The Following: title And Location award And Completion Dates contract Or Subcontract Value type Of Work For Overall Project And Type Of Work Your Firm Performed current Customer Information Including Point Of Contact, Phone Number And Email Address whether The Work Was Performed As A Prime Or Subcontractor type Of Contract (design-build – See Sources Sought Information Form) narrative Project Description To Include Acm Components Used, Subcontractors/vendors Used And Acm’s Effect On The Project’s Cost And Schedule for Design-build Projects, Identify The Name And Address Of The A-e Firm Used To Provide Design Or Specify If Design Was Performed In-house. Identify Your Working Relationship With The Design Firm (i.e., Number Of Years Working Together). 6) Safety: Submit Osha Days Away From Work, Restricted Duty, Or Transfer (dart) Rates And Total Case Rate (tcr) For Each Of Calendar Years 2019, 2020, 2021, 2022 And 2023. For Any Dart Rate Of 3.0 Or Greater Or Any Tcr Of 4.5 Or Greater, Provide An Explanation To Address The Extenuating Circumstances That Affected The Rate And Any Corrective Actions Taken. Instructions For Calculating The Dart Rate And Tcr Can Be Found At Http://www.bls.gov/iif/osheval.htm. For Joint Ventures Or Mentor-protégé Agreements (mpa), Provide The Required Information For Each Entity In The Joint Venture Or Mpa. Navfac May Make An Acquisition Strategy Determination That Excludes Contractors That Do Not Submit The Required Information Or Contractors With Unexplained High Dart Or Tcr Rates From The Pool Of Sufficiently Qualified Contractors. in Sections Where Recent Experience Is Requested, All Experience Will Be Evaluated For Market Research Purposes Only. Firms Are Advised That While Experience Older Than Seven (7) Years Or Not Yet 100% Complete May Demonstrate Capability To Perform The Scope Of Work, It May Not Indicate That The Firm Could Be Competitive During A Future Solicitation Where Only The Most Recent Seven (7) Years Of Experience Will Be Accepted. Navfac May Make An Acquisition Strategy Determination Based On The Likelihood That A Sufficient Pool Of Qualified Contractors Will Be Competitive On A Future Solicitation. responses To This Sources Sought Announcement Are Due No Later Than 2:00 P.m. (pacific Standard Time) On January 8, 2024. Please Email Your Response, In A Pdf Format, To Shane.k.mahelona.civ@us.navy.mil. All Navfac Southwest Solicitations Are Posted On The Website At Https://sam.gov And Begin With “n62473.”

Details: 1.0 Description. The Marine Corps Systems Command (mcsc) Product Manager, Supply And Maintenance Support Systems (mss) Program Office Is Seeking Potential Sources To Provide Corrosion Repair Services Through A Firm Fixed Price Contract For Equipment Located At Okinawa, Japan. This Contract Would Provide Corrosion Repair Services For Marine Corps, Army, Navy, Navy Aviation Ground Support And Ground Support Equipment. The Purpose Of This Rfi Is To Identify Sources Capable Of Providing These Services As Described In The Following Paragraphs. 2.0 Minimum Requirements. The Contractor Shall Provide All Labor, Training, Management, Supervision, Tools, Equipment, Materials, And Supplies (except Those Items Specifically Noted As Government-furnished, Enclosure (1)) Necessary To Perform Corrosion Repair And Restoration Of Government Owned Vehicles, Equipment, And Components. Corrosion Repair Services Include, But Are Not Limited To: inspection disassembly cleaning body Repair surface Preparation coating Application registration Marking reassembly 3.0 Production Requirements. All Production Will Be Performed At The Government’s Site Corrosion Repair Facility (crf), Building 616, Camp Kinser, Okinawa, Japan. 3.1 The Contractor Shall Be Capable Of Repairing And Restoring A Monthly Production Objective Of ~70 Principal End Items (pei) With A Minimum Production Requirement Of Between 55-63 Peis Consisting Of Various Sizes And Corrosion Category Code (ccc) Condition. 3.2 Production Breakdown By Organization. Multiple Government Organizations Will Participate In This Contract; Production Shall Be Completed And Invoiced As Follows: - U.s. Marine Corps Equipment. ~50 Pei Per Month / 600 Per Year. - U.s. Army Pacific (usarpac) Equipment. ~6 Pei Per Month / 72 Per Year. - U.s. Navy Naval Construction Regiment (ncr) 30. ~4 Per Month / 48 Per Year. - U.s. Navy Aviation Intermediate Maintenance Detachment (aimd). ~ 2 Per Month / 24 Per Year - Other Military Services Operating Similar Equipment Outlined As Identified Above. 3.3 Repair Cycle Time (rct). Rct On The Day The Government Makes A Pei Available To The Contractor For Work. The Contractor Shall Be Capable Of Completing All Required Tasks In Thirty Days Or Less From The Equipment Induction Date. 4.0 Quality Assurance. The Contractor Shall Perform Quality Control Continuously Throughout The Corrosion Repair Process, And Develop And Maintain A Quality Control Program To Ensure Services Are Performed In Accordance With The Government’s Requirements And Accepted Practices. The Government Will Complete Quality Assurance (qa) Inspections After Each Stage Of Repair. 5.0 Technical References. All Service Of Equipment Shall Comply With The Following Technical References For The Respective Service’s Equipment: 5.1 U.s. Marine Corps Technical Manual (tm) 4750-15/1_, Painting, Coating, Underbody And Registration Marking For Marine Corps Combat And Tactical Equipment And Tm 4795-12/1, Operator And Organizational Maintenance Manual Corrosion Prevention And Control Procedures For Usmc Ground Combat Equipment. 5.2 U.s. Army Technical Publications. Tm 43-0139, Chemical Agent Resistant Coating (carc) Application And Quality Assurance On Army Ground Equipment And Tm 43-0242, Chemical Agent Resistant Coating Spot Painting For Army Ground Equipment. 5.3 U.s. Navy Technical Publications For Ground Equipment. 5.4 U.s. Navy Technical Publications. Navair 17-1-125, Maintenance Instructions Organizational And Intermediate Level, Support Equipment Cleaning Preservation And Corrosion Control. 5.5 Original Equipment Manufacturer (oem) Specifications, And Or Other Technical Guidance Provided By The Government. 6.0 Responses 6.1. Interested Parties Are Requested To Respond To This Rfi With A White Paper. 6.2. White Papers In Microsoft Word Or Office Compatible Format Are Due No Later Than 10 January 2025, 11:00 A.m. Est. Responses Are Limited To 5 Pages And Shall Be Submitted Via Email Only To The Contract Specialist, Kimberly.a.stone@usmc.mil And Deshawn.gaines@usmc.mil. Proprietary Information, If Any, Should Be Minimized And Must Be Clearly Marked. To Aid The Government, Please Segregate Proprietary Information. Please Be Advised That All Submissions Become Government Property And Will Not Be Returned. Only Government Employees Will Review The Responses. 6.3. Section 1 Of The White Paper Is Not Included In The Page Limitation And Shall Provide The following Administrative Information At A Minimum: 6.3.1. Name, Mailing Address, Overnight Delivery Address (if Different From Mailing Address), Phone Number, And Email Of Designated Point Of Contact, And Sam.gov Unique Entity Identification Number. 6.3.2. The Offeror’s Business Type (large Business, Small Business, Small, Disadvantaged Business, 8(a)-certified Small, Disadvantaged Business, Hubzone Small Business, Woman-owned Small business, Very Small Business, Veteran-owned Small Business, Service-disabled Veteran-owned small Business), Based Upon The North American Industry Classification System (naics) Code. please Refer To Federal Acquisition Regulation (far) Part 19 For Additional Detailed Information On Small Business Size Standards. The Far Is Available At Https://www.acquisition.gov/. 6.4 Naics Code For This Effort Is 811121, Automotive Body, Paint, And Interior Repair And Maintenance. 6.5 Product Service Code (psc) For This Effort Is J023, Maint/repair/rebuild Of Equipment-ground Effect Vehicles, Motor Vehicles, Trailers, And Cycles. 6.6 Section 2 Of The White Paper Shall Answer, At A Minimum, The Offeror’s Ability To Provide The Services Identified Within Paragraphs 2-4 Of This Rfi. 7.0 Industry Discussions. Mcsc Representatives May Or May Not Choose To Meet With Potential Offerors. Such Discussions Would Only Be Intended To Get Further Clarification Of Potential Capability To Meet The Requirements, Especially Any Development And Certification Risks. 8.0 Questions Regarding This Announcement Shall Be Submitted In Writing Via Email To The Contract Specialist, Kimberly.a.stone@usmc.mil And Deshawn.gaines@usmc.mil No Later Than 2:00 Pm Est, 13 December 2024. Verbal Questions Will Not Be Accepted. Questions Shall Not Contain Proprietary Or Classified Information. The Government Does Not Guarantee That Questions Received After 13 December 2024 Will Be Answered. 9.0 Summary. This Is A Request For Information (rfi) Only To Identify Sources That Offer Hardware Services Meeting The Requirements Listed In The Paragraphs Above.1.0. This Rfi Is Issued Solely For Information And Planning Purposes – It Does Not Constitute A Request For Proposal (rfp) Or A Promise To Issue An Rfp In The Future. The Information Provided In The Rfi Is Subject To Change And Is Not Binding On The Government. The Marine Corps Has Not Made A Commitment To Procure Any Of The Items And Or Services Discussed, And Release Of This Rfi Should Not Be Construed As Such A Commitment Or As Authorization To Incur Cost For Which Reimbursement Would Be Required Or Sought. Further, The Marine Corps Is Not At This Time Seeking Proposals And Will Not Accept Unsolicited Proposals. All Submissions Become Government Property And Will Not Be Returned. responders Are Advised That The U.s. Government Will Not Pay For Any Information Or Administrative Costs Incurred In Response To This Rfi; All Costs Associated With Responding To This Rfi Will Be Solely At The Interested Party’s Expense. Not Responding To This Rfi Does Not Preclude Participation In Any Future Rfp, If Any Is Issued. If A Solicitation Is Released, It Will Be Released On Sam.gov The Gsa Website. It Is The Responsibility Of The Potential Offerors To Monitor This Site For Additional Information Pertaining To This Requirement.

Details: The Havelland district intends to carry out the energy-efficient renovation of the facade of the Premnitz community accommodation. The subject of this tender is the services of the carpenters, roofers, electricians, heating, ventilation and plumbing trades. The facade work (including interior and painting work) with scaffolding that is also necessary for the renovation is part of a separate tender (di-zvst-js-28.1/2024).

Description: Project Labor Agreements (pla S) Survey And Request For Contractor Capability Statement Package this Is A Sources Sought Notice For Market Research Only. no Award Will Be Made From This Sources Sought Notice. this Sources Sought Notice (ssn) Is For Market Research Purposes In Accordance With Federal Acquisition Regulation (far) Part 10 And Far 15.201(e), To Determine The Availability And Technical Capabilities Of Qualified Sources. It Does Not Constitute A Solicitation And Is Not To Be Considered As A Commitment By The Government. All Firms Responding To This Notice Are Advised That Their Response To This Notice Is Not A Request That Will Be Considered For Contract Award. All Interested Parties Will Be Required To Respond To The Resultant Solicitation Separately From Their Response To This Notice. jefferson Barracks National Cemetery, sylvan Springs, Phase 1a Expansion project Scope the U.s. Department Of Veterans Affairs (va) Seeks Expressions Of Interest For A Construction Contract At Jefferson Barracks National Cemetery, Sylvan Springs, Phase 1a Expansion With The Use Of A Project Labor Agreement (pla). The North American Industry Classification System (naics) Of 237990 (other Heavy And Civil Engineering Construction) With The Size Standard Of $45.0 Million. The Approximate Project Duration Will Be 912 Calendar Days From The Notice To Proceed. The Estimated Magnitude For This Project Is Between $50,000,000 And $100,000,000. Va Is Considering Conducting This Acquisition As A Best Value With Tradeoffs In Accordance With Far Part 15, Contracting By Negotiation. project Description: the Purpose Of This Phase 1a Expansion Project For Jefferson Barracks National Cemetery Is To Enable The Existing National Cemetery To Continue To Provide Burial Services For Eligible Veterans In Missouri. Jefferson Barracks National Cemetery Is Located Near St. Louis, Missouri. the National Cemetery Administration (nca) Contracted This 33.6-acre Cemetery Expansion Project To Increase Burial Capacity Of Jefferson Barracks National Cemetery (jbnc) To Serve Veterans In The St. Louis Area. This Cemetery Expansion Project Identified On New Land. The Proposed Development Will Provide Continued Service To An Estimated Fiscal Year (fy) 2024 Veteran Population Of Approximately 208,000 Within A 75-mile Service Area. This Proposed Development Will Provide An Additional 15 Years Of Continued Burial Service To A Veteran Population Who Has Been Served By This National Cemetery Since 1827. this Project Will Provide For An Additional 15-year Inventory Of The More Efficient Casketed, Double-depth, Pre-placed Crypts Before Depletion Of The Current Inventory, And Extend The Full Range Of Burial Options Until Fy 2044, As Well As Provide Several Nominal Cemetery Operational And Infrastructure Improvements Within The Older Cemetery Grounds. this Project Will Provide For The Following Elements And Features: base Bid General Construction: the Base Bid Work Of This Contract Includes Phased Requirements. These Phases Are Referred To As Eto And Remainder Of The Work. The Eto Shall Be Completed Within The Established Time Frame Indicated In The Contract. Completion Of The Eto Work Will Follow Procedures Like Those For Final Completion And Acceptance, With The Facilities Within The Eto Being Completed And Turned Over To The Cemetery For Use To Begin Operation Of The Cemetery While The Remaining Work Is Completed. Eto Shall Be Completed And Accepted By Nca For Operation Within 252 Calendar Days From Notice To Proceed. While The Work Of The Eto Is Being Performed, Work For The Remainder Of The Project Can Also Be Performed. work Of The Contract Includes Site Demolition, General Construction, Relocation And Installation Of New Site Utilities, Installation Of Pre-placed Burial Crypts, Columbarium Niches, Roadway Improvements, New Roads, Walks, Grading, Drainage, Site Furnishings, Landscaping And Irrigation Necessary Removal Of Existing Structures And Construction And Certain Other Items And All Other Work Necessary To Construct The Project. The Contractor Shall Obtain State/local Construction Permitting As Required And Conduct All Protected Habitat Preservation, Wetlands, And Mitigation Efforts As Required To Meet Governing Body Mandates. By The End Of The Performance Period All Work Shall Be Satisfactorily Completed And Ready For Custody, Transfer, And Acceptance By Nca. All Punch List Items Shall Be Satisfactorily Addressed, All Commissioning Completed, And All Training Accomplished. replace And Upgrade Carpeting And Painted Finishes In The Administration/ Pic Building. Replace Select Electrical Service Panels In Maintenance Buildings 3001, 3002, And 3003. interment Areas: casketed Remains: a) Approximately 18,500 Pre-placed Crypt Full Casket Gravesites b) Approximately 2,100 Traditional Casket Gravesites cremated Remains: a) Approximately 10,900 In-ground Cremation b) Approximately 5,000 Columbarium Niches base Bid Furnish Pre-placed Crypts: procure, Manufacture, Deliver, Off-load And Store Furnish And Deliver To The Site All Pre-placed Crypts. additive Items Subject To Budget Adequacy: additive #1 Maintenance Yard: install Maintenance Storage Yard And Associated Site Work, Including But Not Limited To Pavements, Curbs, Drainage, Fencing And Gates, Signage, Landscaping, And Irrigation. additive #2 Storage Building: install Maintenance Material Storage Building Including But Not Limited To Sitework, Pavements, Curbing, Concrete Foundations, Concrete Walls, Structural Steel, And Standing Seam Metal Roofing. additive #3 Satellite Maintenance Building: install Satellite Maintenance Building And Associated Site Work Including But Not Limited To Sitework, Utilities, Concrete Foundations, Concrete Slab, Engineered Metal Building, Hvac System, Concrete Masonry Walls, Metal Wall Panels, Standing Seam Metal Roof, Doors, Windows, Interior Finishes, Landscaping, Irrigation, Signage And All Other Work Necessary To Construct The Building. additive #4 Demolish/replace Committal Shelter #4: demolish And Replace Committal Shelter #4(in Main Cemetery) Along With Associate Sitework, Concrete Foundations, Concrete Piers, Curbs, Paving, Standing Seam Metal Roof, Landscaping, Irrigation, Site Furniture And Signage. --- End Of Project Scope --- project Labor Agreement (pla): a Pla Is Defined As A Pre-hire Collective Bargaining Agreement With One Or More Labor Organizations That Establishes The Terms And Conditions Of Employment For A Specific Construction Project And Is An Agreement Described In 29 U.s.c. 158(f). federal Acquisition Regulation (far) 22.503 Policy: (a) Project Labor Agreement (pla) Is A Tool That Agencies May Use To Promote Economy And Efficiency In Federal Procurement. Pursuant To Executive Order 13502, Agencies Are Encouraged To Consider Requiring The Use Of Project Labor Agreements In Connection With Large-scale Construction Projects. (b) An Agency May, If Appropriate, Require That Every Contractor And Subcontractor Engaged In Construction On The Project Agree, For That Project, To Negotiate Or Become A Party To A Project Labor Agreement With One Or More Labor Organizations If The Agency Decides That The Use Of Project Labor Agreements Will- (1) Advance The Federal Government's Interest In Achieving Economy And Efficiency In Federal Procurement, Producing Labor-management Stability, And Ensuring Compliance With Laws And Regulations Governing Safety And Health, Equal Employment Opportunity, Labor And Employment Standards, And Other Matters; And (2) Be Consistent With Law. (c) Agencies May Also Consider The Following Factors In Deciding Whether The Use Of A Project Labor Agreement Is Appropriate For The Construction Project: (1) The Project Will Require Multiple Construction Contractors And/or Subcontractors Employing Workers In Multiple Crafts Or Trades. (2) There Is A Shortage Of Skilled Labor In The Region In Which The Construction Project Will Be Sited. (3) Completion Of The Project Will Require An Extended Period Of Time. (4) Project Labor Agreements Have Been Used On Comparable Projects Undertaken By Federal, State, Municipal, Or Private Entities In The Geographic Area Of The Project. (5) A Project Labor Agreement Will Promote The Agency S Long Term Program Interests, Such As Facilitating The Training Of A Skilled Workforce To Meet The Agency S Future Construction Needs. (6) Any Other Factors That The Agency Decides Are Appropriate. see Far Provision: 52.222-33 Notice Of Requirement For Project Labor Agreement And Far Clause 52.222-34 Project Labor Agreement For Further Details. project Labor Agreement (pla) Questionnaire (please Respond To The Questions Below) 1. Is Your Company Familiar With Project Labor Agreement (pla) And Its Use On Construction Projects? yes/no comments: 2. Would Your Company Likely Submit A Proposal For The Va Construction Solicitation That Requires The Use Of A Pla? yes/no comments: 3. If Va Requires A Pla, Would Your Proposed Construction Cost Likely To Increase Or Decrease And What Is The Likely Percentage Of Cost Increase Or Decrease? comments: 4. Does The Va Requirement To Use Of A Pla On A Construction Project Restrict Competition? yes/no comments: 5. Do You Expect Subcontractor Resistance Should Va Requires The Use Of A Pla On This Construction Solicitation? yes/no comments: 6. Do You Have Additional Comments Regarding The Use Of A Pla For This Project? yes/no comments: --- End Of Pla Questionnaire --- contractor Capability Statement Package: firms Interested In Submitting Their Capabilities For This Project Must Include The Following Information Compiled Into A Contractor Capability Statement Package: cover Letter/introduction That Includes Company Name, Address, System For Award Management Database At Https://www.sam.gov/portal/sam Sam.gov Unique Entity Id Numbers, Point Of Contact With Phone Number And E-mail Address. business Size Determination. State Your Firm S Socioeconomic Type And Business Size: Such As (service-disabled Small Business, Veteran Owned Small Business, Small Business, Woman Owned Small Business, Large Business, Etc.). if Identifying As A Service-disabled Veteran-owned Small Business (sdvosb) Firm (or Jv), Veteran Owned Small Business Firm (vosb) (or Jv), You Must Be Registered In The U.s. Small Business Administration Veterans Small Business Certification (vetcert) Database At: Https://veterans.certify.sba.gov. Provide Evidence Of Certification. bonding Capacity: provide A Letter From Your Surety, On Surety Letterhead That Affirms Your Company S Bonding Capacity To Furnish A Bid Bond, Payment Bond, And Performance Bond For A Project Between $50 - $100 Million. contractor Capability Statement Shall Include, But Not Be Limited, To The Following: corporate Experience: provide Projects In The Past Five (5) Years That Are Valued At Approximately $30m Or Greater In Construction Costs, And demonstrate Your Company S Experience Constructing Or Managing The Construction Of Projects That Match The Following Characteristics: a. Va/nca National Cemetery Projects. (if No National Cemetery Experiences Provide Projects Similar Such As Regional Parks, Multiple Sport-fields Complexes, Or Multi-phased Land Development Projects Larger Than 10 Acres). b. State/local/private Cemetery Projects. c. Projects Requiring The Construction Of Multiple Features Typical To A National Cemetery Such As Pre-cast, Placed Crypts; Columbaria Niches, Memorial Walls, Cast Or Natural Stone Columbarium Caps, Cast Or Natural Stone Veneers, Turf (sod) Placement And Maintenance, Tree And Shrub Placement And Maintenance, Irrigation Systems With Mainlines Exceeding 4-inch In Diameter, Irrigation Central Control Systems, Roadways, Wetlands/environmental Remediation Or Restoration. d. Building Construction, Building Remodel, Mass/fine Grading & Excavation, Site Utilities, Paving, New Golf Courses Or Expansions, Regional Parks, Multiple Sport-fields Complexes, Or Multi-phased Land Development Projects Larger Than 10 Acres. describe Your Experience With As Many Of The Elements Of Construction Identified, Below, As You Can: i. Mass/fine Grading & Excavation Site Utilities prefer To See Projects Involving Earth Work And Grading For Cemeteries, Parks, Or Site Development Projects Of At Least 10 Acres. ii. Site Utilities demonstrate Experience With Storm Water Management Systems And Site Drainage For Flat Sites. demonstrate Experience With Potable Water Distribution From A Well, Or Municipal Source. demonstrate Experience With Sanitary Waste Systems, Both Powts & Municipal. iii. Paving paving Projects May Include Private & Local Asphalt Roads; Concrete Curb & Gutter, Asphalt Parking Lots, And Concrete Sidewalk, On Site Development Projects Of At Least 10 Acres. experience In Missouri Or Similar Climates Is Preferred, But Not Required. iv. Landscaping landscaping Projects Involving Planting And Lawn Installation For Cemeteries, Parks, Golf Courses Or Other Site Development Projects Of At Least 10 Acres In Climates Similar To St. Louis, Missouri. v. Irrigation irrigation System Installation For Cemetery, Park, Golf Course, Or Other Types Of Development Sites Of At Least 10 Acres. Include Experience With Irrigation Ponds, Wells, Pumping Systems If You Have It. vi. Precast Concrete Burial Components demonstrate Experience With Successful Fabrication And Installation Of Precast Crypt And Precast Columbarium, If You Have It. vii. Phasing And Continuity Of Operations demonstrate Experience With Best Practices To Successfully Complete Phased Site Work At An Occupied And Functioning Facility In A Way To Minimize Noise And Dust And Minimize Detrimental Effects On Cemetery Operations. current Project List: provide A Detailed List Of Ongoing Contracts & Projects. The Description Shall Include: project Type award Amount award Date estimated Completion Date ---- End Of Contractor Capability Statement Package --- please Submit Your Comments To The Pla Questionnaire And The Contractor Capability Statement Package Via Email To Joshua Gibson, Contracting Officer, At Joshua.gibson2@va.gov, No Later Than 3:00 Pm Et On January 6, 2025, In The Subject Line State Jefferson Barracks National Cemetery, Phase 1a Expansion And [company Name]". Note That This Mailbox Will Only Accept E-mails Of 15mb In Size Or Smaller, So You May Break Your Submission Into Multiple Emails If Needed. All Information Concerning This Requirement, When It Proceeds To Solicitation, Will Be Posted Only On The Federal Business Opportunities Website (https://sam.gov). --- End Of Sources Sought Notice ---

Details: Öhb 11/2024 Renovation/repair of sanitary facilities after water damage in the Diesterwegring gymnasium, Diesterwegring 1 in Eisenhüttenstadt Lot 6 - Tiles - Approx. 50 m² plaster removal and application - Approx. 300 m² interior sealing W2-i - Approx. 500 B169m² wall tiles - Approx. 200 m² floor tiles

Description: Contract notice – Sector Directive, Standard regulation Open procedure (construction work) Leipziger Strasse underground station fire protection – 8 lots Description of the overall construction project In the existing Leipziger Strasse underground station in Frankfurt am Main, Bockenheim district, a fire protection renovation of the entire station is being carried out by the Verkehrsgesellschaft Frankfurt am Main GmbH (hereinafter referred to as “VGF”). The fire protection and construction measures take place on the following levels of the station: A-level - above ground, access to the Leipziger Strasse underground station B-level - distribution level C-level - platform level C1-level - crawl space/technical level below C-level, room height 1.21m D-level - platform level D1-level - crawl space/technical level below D-level, room height 1.21m Simultaneous construction work Other companies will be working on the construction site at the same time as the work is being carried out. Coordination with the companies working on the construction site at the same time is required. The start of work depends on the completion of the respective area by the preliminary trades Lot 1: Electrical work Lot 2: Communications technology (bma) Lot 3: Extended shell work Lot 4: Metalwork Lot 5: Hkls conversion projects Lot 6: Contaminant remediation Lot 7: MSR Lot 8: Construction cleaning work Further tenders/notices are planned for the overall fire protection project on Leipziger Strasse: - Drywallers - Painters/plasterers - Door builders Lot 1: New L&K-communications technology-zlt building The tender includes the construction power and adaptation of the existing installation. The services carried out in the list of services include: - Upgrading of routes and new routes - Installation of lights on the platforms (C and D levels), public areas on levels B, C and D - Fire barriers in the area of the new cable routes - Installation of fire alarm components supplied by the customer - Cabling of the systems, incl. ZLT cabling - Installations in the technical rooms - Protection of the existing building structure for the duration of the construction work - Construction site lighting and construction power - Installation of loudspeakers - Expansion of the Saa control center - Installation of temporary protective measures for personal protection during the construction work - Adjustments to existing installations - Dismantling of old electrical equipment including fastening materials - Delivery and introduction of required materials to the installation site (horizontal and vertical paths within the station) must be factored into the unit prices - Connection work on electrical equipment - Preparation of documentation including evidence of lighting measurements - Production of functional operating systems in accordance with the current state of the art - Commissioning and acceptance of the new operating systems Lot 2: New construction of communications technology (bma) The tender includes the construction power and adjustment of the existing installation. The services carried out in the list of services include: - Installation of a fire alarm system Lot 3: Extended shell construction work The underlying list of services includes the extended shell construction work. The services listed in the scope of work include: - Providing and maintaining your own construction site equipment - Protecting certain TGA routes, built-in components (switch cabinets), furniture and surfaces - Demolition of door thresholds, masonry, wall tiles, drywall - Creating new masonry walls, door openings - Renewal of floor tiles after door replacement - Strengthening existing masonry in accordance with fire protection specifications - Renewal of an interior building expansion joint F90 - Reduction of wall openings - Creating a foundation for a base cabinet including adjustment of the sidewalk and tree border as well as delivery and assembly of a bench - Creating a house entry including laying empty pipes - Professional disposal of non-contaminated demolition material The working height is up to approx. 4.00 m Lot 4: Metalwork The underlying scope of work includes the metalwork. The services listed in the scope of work include: - Provision and maintenance of your own construction site equipment - Cordoning off your own work area in the public area of the station - Demolition of ceiling sails as part of a station closure - Demolition of metal ceiling paneling - Manufacturing, delivery and installation of smoke curtains including the associated drywall aprons - Manufacturing, delivery and installation of ceiling paneling sheets Lot 5: Fire protection renovation of plumbing / fire extinguishing / ventilation The underlying scope of work includes the work of the plumbing, fire extinguishing and ventilation trades. The services listed in the scope of work include: - The repeated decommissioning of the existing ventilation system for work on the BSKs - The cleaning of the ventilation ducts in the area of the removed BSKs up to 2.00 m in length - The preparation of the openings created for the installation of new BSKs - The installation of new BSKs - The installation of new BSKs as overflow openings - The connection of new BSKs to the existing ventilation installation - The dismantling and renewal of the existing insulation - The retrofitting of a few BSKs with an AS-I module and a motor - Various small-scale adaptation work on the existing ventilation installation - The fire protection upgrade of pipe penetrations - The installation of protective and barrier measures for the aforementioned work - The installation of a split refrigeration unit for a technical room - The installation of a fire extinguishing separation station Lot 6: Pollutant remediation Main measure The underlying scope of work includes This includes the remediation of pollutants and dismantling of fire dampers and fire doors on levels B, C and D, as well as in the public area of the station. The services listed in the scope of work include: - Provision and maintenance of our own construction site equipment - Erection of locks and film sealing of areas in accordance with TRGS519 - Dismantling of fire dampers in accordance with TRGS519 and DGUV 201-012 BT58 procedures - Dry cleaning (vacuum extraction) and wet cleaning of areas in accordance with TRGS519 - Visual acceptance by the contractor and clearance measurement by an external company. - Dismantling of the sealing areas. The working height is approximately 2.80m to 4.00m. The work is taking place during a closure and rail operations in the station. Work cannot be carried out continuously to carry out the services in the underlying scope of work. Subsequent trades such as ventilation construction and fire protection must also be taken into account in the schedule. For the pollutant remediation in the B, C and D levels for the following time frame: February 2025 - July 2028 Unrestricted use of the entire work area is possible. Lot 7: MSR The underlying list of services includes the work of the MSR trade. The services detailed in the scope of work include: - Disconnecting the existing cabling from the existing fire dampers and the central control cabinet prior to the asbestos remediation work (dismantling fire dampers) - Dismantling the existing cabling between the fire dampers and the central control cabinet in the ventilation center - Installing new ISP cabinets including the required components and internal cabling - Installing the new ASI cabling including laying systems - Connecting the new ASI cabling to the new fire dampers - Modifications to the existing control cabinet to meet the new requirements of the fire protection concept - Programming work In order to ensure compatibility with the existing ZLT/GLT, the components of the control cabinets are to be offered as product-specific products from Siemens. Lot 8: Building site cleaning work The underlying scope of work includes the building site cleaning work. The services listed in the list of services include: - Rough cleaning of the crawl space - Intermediate cleaning of public areas including stairwells, technical rooms and ancillary rooms during the construction period - Final cleaning of public areas including stairwells, technical rooms and ancillary rooms The working height is up to approx. 4.00m

Purchaser Name: MINISTRY of THE INTERIOR and OVERSEAS | Supply of Modular Intervention Bulletproof Vests for the Benefit of the National Police Intervention Force (fipn)

Purchaser Name: Ministry of the Interior and Overseas | Use and Maintenance of the “Consul Station” Telemedicine Cabins

Details: The Rheinsberg educational campus at Kiefernweg 5 is to be expanded and developed as a primary school through conversion and renovation. The property was built in 1980-1981 as a prefabricated school (Erfurt type). It has been used continuously as a school to date. The last facade renovation took place in 1990. There are currently classrooms for the primary school and the day-care center in the building. The work will be carried out during normal school operations (mostly during the holidays) and in some areas and is to be costed accordingly. The following work is to be carried out as part of this specification of work: Shell construction work - demolition / concrete cutting work Wall - demolition / load-bearing interior walls - demolition of interior doors - core drilling - opening closure MW - supporting opening with steel frame - screed The detailed specification of all work can be found in the specification of work.