Interior Tenders

Details: The Havelland district is planning to build an extension at the site of the cooperation school in Friesack. The construction work is to take place during ongoing school operations. The extension will have 3 floors. In preparation for this work, the building site must be cleared. The work advertised here is part of the overall construction work. There will be 7 contract packages for this construction work. In these award packages, the following services are awarded according to the 80/20 rule within the framework of national procedures: Vp 0 - Clearance of construction site HLS (heating, plumbing) - Clearance of construction site ELT (electrical) - Clearance of construction site other (demolition and relocation) - Felling and clearing work - Infiltration work Vp 1 - Elevator - Construction power system - Lightning protection and earthing Vp 3 - Interior plastering - Screed work - PV system - Kitchen technology systems Vp 4 - Painting work Vp 5 - Tiling work - Floor covering work - Carpentry work Vp 6 - Building cleaning - Locking system Vp 7 - Extended shell of existing elevator shaft - Existing elevator shaft shell - Existing extension (extension of elevator shaft + relocation of student cafe)

Details: The Havelland district is planning to build an extension at the site of the cooperation school in Friesack. The construction work is to take place during ongoing school operations. The extension will have 3 floors. In preparation for this work, the building site must be cleared. The work advertised here is part of the overall construction work. There will be 7 contract packages for this construction work. In these award packages, the following services are awarded according to the 80/20 rule within the framework of national procedures: Vp 0 - Clearance of construction site HLS (heating, plumbing) - Clearance of construction site ELT (electrical) - Clearance of construction site other (demolition and relocation) - Felling and clearing work - Infiltration work Vp 1 - Elevator - Construction power system - Lightning protection and earthing Vp 3 - Interior plastering - Screed work - PV system - Kitchen technology systems Vp 4 - Painting work Vp 5 - Tiling work - Floor covering work - Carpentry work Vp 6 - Building cleaning - Locking system Vp 7 - Extended shell of existing elevator shaft - Existing elevator shaft shell - Existing extension (extension of elevator shaft + relocation of student cafe)

Purchaser Name: General Secretariat for the Administration of the Ministry of the Interior South, Directorate of General | France – Paints, Varnishes And Mastics – Accord-cadre Mono-attributaire À Bons De Commande Relatif À La Fourniture Et À La Livraison De Peinture Hydrodiluable Pour Les Ateliers De Carrosserie De La Direction De L Équipement Et De La Logistique Du Sgami Sud-site De Montpellier (34)

Purchaser Name: General Secretariat for the Administration of the Ministry of the Interior South, Directorate of General | Single-award framework agreement with purchase orders relating to the supply and delivery of water-based paint for the bodywork workshops of the Equipment and Logistics Department

Details: Description Lot 1 - Carprentry (delivery Period: 15 Days) 8 Unit - Portable Hand Drill, Power Sourced: Battery Powered - 2pc; 21 Volt; 1500mah Lithium-ion Batteries; Maximum Rotational Speed: 1500 Rpm; Voltage: 21v; Amperage: 1.5 Amps; Chuck Size: 0.38"; Bit Heads Diameters: From 0.8mm - 10mm; Product Dimensions: 8 - 10" (l) X 2 - 4" (w) X 6 - 8" (h); Material: ‎plastic, Rubber, Metal; Item Weight: Atleast ‎2.5 Pounds; Item Torque: 330 Inch Pounds; Inclusions: 1x21 Volt Brand: Cordless Power Drill, 2x Rechargeable Battery, 1x English User Manual, 10x Self-drilling Drywall Anchors,10x Screwdriver Bits, 2x Double Ended Bits, 3x Drilling Bits, 1x Magnetic Extension Socket Bit Holder, 10x Anchors With Screws，1x One-hour Fast Charger, 1x Flexible Extension Shaft, 1x Carrying Bag 8 Unit - Electric Circular Saw, Voltage: 220-240v; Frequency: 50-60hz; Input Power: 1800w; No-load Speed: Atleast 4800rpm; Blade Diameter: 185mm; Cutting Capacity: 45degree: 44mm, 90 Degree: 65mm; Maximum Cutting Depth: Atleast 90°62mm, Weight: Maximum Of 5.2kg; Item Approximate Dimension: 15-17cm (h), 25-28cm (w), 30-35cm (l) 8 - Unit - Electric Grinder Voltage: 220v Rated Power Input: 750w No - Load Speed: 1100 Rpm Disc Diameter: 0mm Dimension: Approx: Length: 250 - 290mm Width: 50 - 80mm Height: 90 -110mm Weight: 1.5 - 1.8kg 8 Unit - Electric Planer; Voltage: 220v;continuous Rating Input : 500 W ; Planing Width : 82 Mm (3-1/4”);planing Depth : 1 Mm (1/32”) ;max Shiplapping : 9 Mm (11/32); No Load Speed : 16,000 Rpm; Dimension: Approx. : (l) 25 - 30cm*(h) 10 - 15cm*(w) 12 - 17cm; Net Wt- 2 - 4kg; Power Cord Length- At Least 1.5meters; Breadth Of Planer- 82x1mm 8 Unit - Electric Jigsaw Continuous Rating Input: 450 - 600w Capacity: 40mm (in Wood); 6mm ( In Steel) Length Of Stroke: 18mm Strokes Per Minute: 500 - 3,100 Dimension: Approx.: L - 5 - 9 Inches; W - 2 - 4 Inches; H - 4 - 8 Inches Voltage: 220v; Frequency- 50-60hz; No Load Speed- 800-3000rpm; Cutting Capacity- Wood-50mm; Steel- 6mm 8 Unit - Electric Plunge Router Voltage: 220v - 50hz Collect Capacity: 1/2 Inch Continuous Rating Input: 1650w Plunge Capacity: 66mm Overall Height: Approx.: 9 - 12 Inches; Net Weight: At Least 4.2 Kg; 1600w; Base Diameter- 160mm; No Load Speed- 23000rpm Power Supply Cord Length - At Least 4.0m (13.1ft); Rpm 8,000-27,500 8 Set - Wood Chisel Set Of 5; 1/4", 3/8", 1/2", 3/4", 1", , Wooden Handle, High Carbon Metal File L-6.8 Inch Lot 2 - Fish Vending (delivery Period: 30 Days) 1 Unit - Bicycle With Sidecar Bicycle Specifications: Bmx Type Bike Frame Front And Rear Free Wheel Hub For Rim Set Single Engine Speed Tread Type (wheel Set), Tire Size (20 Inches X 2.2125 Jumbo), Interior Tube (20 Inches By 2.2125 Jumbo), Handle Bar, Bmx Fork, Head Parts (h Post, Handle Grip) Chain (single Speed, Pedal (bearing Type) Seat Clamp, Saddle With Spring, Foot Brake (clamp With Spring), Crack Pedals (175mm - 180mm), Side Car Specifications; Side Car With Umbrella Tube Holder Dimensions: 25.8 Inches (l) X 16.2 Inches (w), 15.7 Inches (h), Approx.: 20 - 25 Kls Capacity Materials: 1/2 J1 Pipe 540mm, 316 X Flat Square Bar, J1 Pipe De Una 520mm, 1/4 Flat Bar, 6203 Gi Set, Tire 20 X 2.125 Jumbo Bicycle With Side Car - Red With Dole And Dilp Logo (front) 1 Unit -digital Weighing Scale, Ac/dc Digital Scale; 6 Digits Lcd Display; 220v-240v/60 Hz; 30 - 40kg; Power Plug: Us Type 1 Pc - Chest Cooler, Item Package Dimensions: ‎approx. : 23 - 26" (l) X 14 - 17" (w) X 13 - 16" (h), Package Weight: ‎5.76kg, Inside Dimensions: Approx: 22 - 25" (l) X 12 - 15" (w) X 13 - 15" (h), Material: ‎plastic, Chamber Depth: 24.95", Capacity: 52l 1 Pc - Beach Umbrella, Round-shaped; Material: Poly Canvass; Diameter: 40""; Pole Stand Length: At Least 45""; Pole Material: Stainless Steel Chrome 1 Pc - Butcher's Knife, Materials: Stainless; Wood Handle; Size: About 8 - 12 Lot 3 - Barbershop (delivery Period: 15 Days) 3 Set - Cordless Clipper: Body Material: Aluminum; Motor: Rotary; Power/source Battery: Lithium-ion Battery (90+ Minutes Of Runtime); Blades: Titanium Blades; 3 Guide Combs Plastic Material (#1/2, #1, And #1½ ); Cutting Lengths: 0.4-25mm; Inclusions: A Blade Guard; 1 Recharging Transformer (charger); 1 Cleaning Brush, With Lubricating Oil Of At At Least 5 Ml And English User Manual; Product Dimension: Approximately 6 - 8" (l) X 2 - 4" (w); Weight: Maximum Of 400g; Input: Can Be Used For 110-240 Voltage 6 Pc - Hair Thinning Shear(professional Use), Size 6", Stainless Steel;thinning Rate- 25%; No. Of Teeth- 30 6 Set - Hair Shear (set): Material: Stainless Steel, Length; 1 Precision Scissor Approximately 6-7"; 1 Thinning Scissor Atleast 6"; Accesories: Scissors Oil Atleast 5ml 6 Pc - Shaving Razor/labaha: Dimensions: Approximately 5-6" (l) X 3/4-1" (w): Material: Carbon Steel, Color: Black 6 Pc - Barber Skin Fade Brush: Handle: Wood; With Soft Bristles 1" (l); Dimensions: Atleast 5.5" (l) X 1" (w) 3 Set - Comb Set (4pcs/set): Material: High Quality Plastic; Inclusions: #1-approx. Size: 4.88" (l) X 1.02" (w); #2-approx. Size: 7.09" (l) X 1.46" (w); #3-approx. Size: 7.87" (l) X 1.18" (w), #4-6.10" (l) X 0.20" (w) 6 Pc - Barber's Cape: Color: Black, 140cm (l) X 110cm (w); Cloth: Polyester 3 Pc - 360 Degree Swivel Barber Chair: Classic Back Seat With Chrom Steel Base; Premium Steel Frame And High Class Foot Pump; Heavy Duty Leather Cover; Lower Height - Atleast 51cm; Top Height - Atleast 61cm; Backrest Height - Atleast 40cm 6 Pc - Barber Apron: With Two Pockets; Waterproof; Material: Cotton And Acrylic; Item Size: Approx. 38-38.19" (l) X 27-27.36" (w) 6 Pc - Barber Spray Bottle, Plastic, Clear, 300 Ml 6 Pc - Barber Spray Bottle, Plastic, Clear, 500 Ml 6 Pc - Tissue, Roll, 2 Ply, 6 Pcs Per Pack 15 Pc - Baby Powder, 500g Lot 4 - Laundry Service (delivery Period: 15 Days) 1 Unit - Washing Machine With Spinner And Dryer; Dimensions: Approx. 57 - 60 Cm (l) X 56 - 59cm (w) X 96 - 99 Cm (h); Gross Weight: Approx. 44 - 47kg; Washing Capacity: Atleast 11.5kg; Rated Power: 1500 W; Voltage: 220 V 2 Pcs - Wash Basin (big Batya), Round Plastic, Dia- 64.5 Cm, H- 25cm Thickness- 1/2 Inch; Color- Black 2 Pcs -laundry Basket, Round Plastic, L- 22 - 27inches, H- 18 - 23inches, 23 - 26 Cm Thicknesss, Color Black 3packs - Powder Detergent, 10 Kg Pack 3 Gallon - Fabric Conditioner; 128 Ounces Lot 5 - Nail Care Service (delivery Period: 15 Days) 4 Gallon -acetone/nail Polish Remover 4 Gallon - Cuticle Remover 2 Pack - Nail Brush, Material: Plastic; Size: Atleast 3" (l), 2-3" (h); 12 Pcs/pack 2 Set - Nail Tool Set, Material: Stainless Steel; Case: Leather; Package Size: Approximately 15-15.5cm (l) X 8cm (w) X 2cm (h); Inclusions: Cuticle Trimmer (95mm), Blackhead Needle And Loop Remover (83mm), Eyebrow Tweezer (86mm) Peeling Knife (90mm), Nail File (75mm), Ear Pick (78mm), Double Pick (75mm), Dead Skin Fork (86mm), Small Pedicure Plier (95mm), Acne Needle (83mm), Small Nail Clipper (62mm) Bevel Nail Clipper (61mm), Large Nail Clipper (82mm), Beauty Tip Scissor (89mm), Pusher 20 Pack - Cotton Balls, 300g (100 Pcs Large Cotton Balls) 2 Set - Nail Polish, Volume: 15ml; With 24 Colors Inclusions: 14k Gold, 18k Gold, 24k Gold, African Plum, Baby Pink, Black Velvet, Carolina Peach, Cashmere, Emerald Shimmer, Golden Bronze, Italian Nude, Platinum Special, Pussy Red, Red Pearl, Saphire Glow, Silver Platinum, Simply Red, Tahiti Brown, White Satin, White Rose, Platinum Silver, Touch Of Tan, Touch Of Beige, Colorless 2 Unit -foot Spa Soaker, With Pumice Stone; Package Dimensions: Approximately 15 - 17" X 12 - 14" X 6 - 8", Weight: About 4 - 6 Pounds; Rated Power: 500 Watts; Rated Voltage: 110~120v; Rated Frequency: 50hz; Temperature Adjustable Range: 35℃ To 48℃ 4 Gallon - Astringent Foot Soaker 4 Pack - Cooling Foot Soak, Product Dimensions: ‎approximately 6.5-7" X 2.38-2.50" X 9.259.50", Weight: Atleast 900g 4 Tube - Exfoliating Foot Scrub, Dimension: Approx. 7 - 8" X 2 - 3" X 1 - 2 Inches; Weight: Atleast 6oz 4 Pc - Foot File And Callous Remover, Material: Metal, Steel; Item Dimensions: Approx. (l) 10-10.78" X (w) 2.7"; Item Weight: At Least 3.2 Pounds 4 Gallon - Alcohol, Isopropyl, 30% 4 Gallon - Foot Scrub , Peppermint Flavor,128 Ounces 10 Pc - Salon Towels: Material: Pure Cotton; Sizes: Approx. 70 - 75cm (l) X 30 - 35cm (w); Color: White 2 Pc - Stool, Hard Plastic Material; Dimension: Approximately 10-11"(l) X 9-10" (w) X Atleast 20" (h) - Including The Backrest 2 Pc - Manicurist Bag, Made Of Heavy Duty Nylon; Large Capacity: Enough Room To Hold Up To 42 Bottles Of 15ml Nail Polish; Size: Approx. 8-9" (l) X 6-7" (w) X 4-5" (h) Lot 6 - Vulcanizing (delivery Period: 15 Days) 2 Unit - Tire Vulcanizing Machine: Automatic Temperature Adjustment; Steel Material; Maximum Current: 10a; Temperature Range: 140 - 165 Degrees Celcius; Voltage: 220v; Power: 500w; Vulcanizing Time: 7 Minutes; Dimension: Approx.: Screw Diameter: 23 - 28mm (l) X 292 - 297mm (w), 407 - 412mm (h) 2 Unit - Air Compressor Machine, Motor Power: 1.5hp; Speed: 1050rpm; Air Delivery: 250l/min; Working Pressure: 115 Psi/8 Bar; Tank: 100l; Size: Approx. (l) 937 - 942mm X (w) 382 - 387mm X (h) 797 - 802mm; Net Weight: At Least 89 - 91kg 2 Unit - Hydraulic Bottle Jack, Material: Alloy Steel; 2 Tons Capacity; Minimum Height: 148mm; Maximum Height: 251-300mm; Lifting Height: 80mm; Adjusting Height: 50mm; Net Weight: Approx. : 2 - 3kg 2 Roll - Air Compressor Hose, 20m Long, Hose Diameter 1/4" : Working Pressure Up To 150psi, Material: Polyurethane 2 Pairs - Tire Changer Wrench, Atleast 12" Long; Material: Metal Steel 2 Pc - Scissors, Material: Forged Steel; 10" Long, With Rubber Grip Handle Lot 7 - Carwash Service (delivery Period: 15 Days) 1 Unit - Pressure Washer, Power: 1200w; Max. Pressure: 100 Bar; Max. Flow Rate: 300l/h; Inlet Water Temperature: 40°c; Motor Type: Series; Pump Type: 3 Cylindrical, Metal; Cable Length : Atleast 5m; Hose Length: Atleast 3m; Weight (w/out Accessories): Approximately 3 - 5kg; Nozzles: 20/80 Degree Variable Fan 1 Set - Vacuum With Blower, 22l Tank Capacity, Power Supply: 220v-240v; Power: 1200watts; Rated Frequency: 50/60h; Kilo Pascal: 18kpa; Max Air Flow I/sec Motor: 50l/s; Sound Level (db(a): 75; Hose Length: Atleast 2.1m; Cord Length: Atleast 3m; Inclusions: Atleast 3.2cm Flexible Hose, Extension Wand, Floor Nozzle, Crevice Nozzle, Cartridge Filter 1 Set - Power Sprayer Belt Driven Aluminum, 1.5 Hp; Induction Type: Electric Motor; Max Operating Pressure Of 450psi For Single User; While 750psi For Two Users; Water Volume Of 20 Liters/minute; Motor Dimension: Approximately 350mm (l) X 280mm (w) X 300 Mm (h); Power Engine 3.5-4 Ps; Inclusion: 10 Meter Discharge Pressurized Hose, 60hz; Plunger Size: 22mm; Spraying Volume; Atleast 25l/min; Single Cylinder; 4 Stroke; Air Cooled; Ohv 1 Pc - Plastic Container Drum, Size: Approx.: 90 - 92cm (h), 56 - 58cm (diameter); Weight: Atleast 8 - 9 Kg; Capacity: 200l 1 Set - Spray Gun With Hose, Water Gun Type: Fog And Direct; Gun Body Material: Alluminum Alloy; Tip Material, Copper; Handle Material, Alloy; Hose Length: 5m; Product Size: 14cm (l) X 18cm (w) 2 Pcs - Pail, Dimensions: Approx. (l) 30 - 32cm; (w) 20 - 22cm; (h) 27 - 29cm ; Material: Plastic 3 Pc - Chamois Cloth, Material: Soft, High Absorbent Leather; Size: About 30cm (l) X 30cm (w) 2 Pc - Sponge (big), Material: Polyurethane; Dimensions: Atleast 8.8" (l) X 4.4" (w) X 2.64" (h); Item Weight: Approx. 0.3 Pounds 2 Liter - Car Shampoo, 1l, Liquid Gel; Color: Orange/red 2 Liter - Tire Black Dressing, 1l, Wax Type; Color: Black 5 Pcs - Car Polisher, 250 Ml, Liquid Lot 8 - Auto / Motor Repair Service (delivery Period: 15 Days) 1 Unit - Air Compressor Machine, Motor: 1/2 Hp; No. Of Cylinder: 2; Phase: 1; Pressure: 85 Psi; Capacity: 46 Liters; Approximate Dimension: 95-100cm (l) X 31-35cm (w) X 64-70cm (h); Weight: 46 - 48kg; Inflation Time: 53min; Air Displacement: 208l/min 1 Set - Pliers Tools Set, Material: Chrome Vanadium Steel, Alloy Steel; Handle Material: Thermoplastic Rubber; Item Weight: Atleast 790 Grams; Inclusions: Atleast 8" (length) Combination Pliers, 6" (length) Diagonal Cutting, 6" (length) Long Nose Pliers 1 Unit - Impact Wrench, Lithium Ion Battery Voltage: 18v; Weight W/out Battery: Approximately 1 - 2kg; Torque: Max-160 Nm; No-load Speed: 0-2,800 Rpm; Impact Rate: 0-3,600 Bpm; Tool Holder: 1/4'' Hex Uni, Screw, Diameter: M6 – M14; Vibration Emission Value Ah: 9.5 M/s²; Uncertainty K: 1.5 M/s²; Vibration Emission Value Ah: 9.5/m/s² 1 Set - Ratchet And Socket Set, Material: Steel; Inclusions: 20 Pieces 1/2" Point Sockets1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 19/32, 5/8, 11/16, 3/4, 25/32, 13/16, 7/8, 15/16, 31/32, 1, 1-1/16, 1-1/18, 1-3/16, 1-1/4; 6 Pieces 1/2" Accessories Extension Bar - 5", Extension Bar - 10", Spark Plug Socket 6 Pt. 13/16", Sliding T-bar 10" With Molded Plastic Case 1 Set - Screwdriver, Cushion Grip; Magnetized Tip For Easy Pick-up Of Screws , 6 Pcs (slotted 6mm X 150mm), Slotted Parallel 5mm X 100mm, Slotted 3mm X 100mm, Slotted 5mm X 150mm, Ph2 X 150mm, Ph1 X 100mm) 1 Set - Wrench Set, Weight: 3 - 4kg; Material: Min. Or Max Chrome Vanadium Steel; Inclusion: 8mm,9mm,10mm,12mm,13mm,14mm,17mm, 19mm,21mm,22mm, 24mm, 27mm, 30mm, 32mm *nothing Follows*

Details: Amendment #5: 2nd Round Of Answers To Questions From Industry, Below - In Addition, Updated Attachments To Now Include The Current Cba: question # question answer 1 how Many Guards Are Being Requested? this Is The Responsibility Of The Offeror To Determine Based On The requirements Stated In The Rfq And Attachments Thereto. 2 how Many Shifts Daily Are To Be Covered? the Number Of Shifts Is Determined By The Offeror. Any Firm Shift requirements Are Contained In The Personnel Qualifications Attachment. 3 is 24/7 Coverage Being Requested. yes. 4 do Guards Need To Be Armed/unarmed. all Unarmed. 5 under The Pass/fail Requirement, If Work Is Being Performed At Government facility How/why Does The Contractor Need To: • 2.1 Plan For Obtaining Personnel Clearances the Offeror Shall Provide, A Plan For Obtaining Personnel Clearances Within 30 Days Of The Start Of The Period Of Performance At The Required Level specified In The Dd Form 254, Contract Security Classification Specification attached To This Solicitation. The Plan Shall Include Confirmation Of Existing personnel Clearances, Detail The Offeror's Process For Obtaining New clearances To Perform The Full Requirement By The Time Full Operational tempo Is Reached Within 30 Days Of The Period Of Performance Start Date, and Outline The Schedule For Obtaining Any Required New Clearances During the Life Of The Contract. • There Is A Request For Resumes. How Then Can We Provide Resumes Of staff, Since Staff Won't Be Assigned Until Reward. Pm And Sl Won't And Can't be Determined Until Award And Set Schedule Is In Place. please Clarify Need For Personnel Security Clearance. this Requirement Is Accurate As Stated And Is In Accordance With The Dd 254 attached To The Rfq Which Will Be Included In The Resulting Award. 6 is There An Incumbent In Place Or Is This Anew Request? yes. The Incumbent Contractor Is Shiloh Services, Inc. 7 sow 2.1 States That "work Specified Herein Shall Be Performed At ….newport Rhode Island….or An Alternate Security Monitor Center." a. Can The Government Elaborate On When An Alternate Center Would Be Used? b. Would These Alternate Centers Be At Any Of The Locations Listed In Sow 2.0 (i.e., Usa And International Locations)? a. Whenever The Primary Smc Is Not Capable Of Functioning Or During Tests Of The Alternate Smc’s Systems. b. There Is Only One Alternate Smc And It Is Also Located At Nuwc Newport. 8 sow 4.7.1: Are There Any Specifications For The Type Of Vehicle The Contractor Should Provide (i.e., Compact Car, Sedan, Suv, Truck, Etc.)? a. Does The Vehicle Need Any Type Of Lights (i.e., Roof, Strobe, Spotlight)? b. Is Any Interior Equipment Required (i.e., Fire Extinguisher, First Aid Kit, Etc.)? any Form Of Compact Car, Sedan, Suv, Or Truck Is Acceptable. Gators, Golf Carts, Etc Are Not Considered Acceptable Vehicles As They Must Be Registered To Operate On Ri Roadways. a. No. b. No. 9 sow 5.2: For Pricing Purposes, Is Any Of The Mandatory Training Conducted While Staff Is Off Duty? a. If Training Is Off Duty, How Many Hours Per Employee Would Need To Be Compensated? none Of The Mandatory Training Is Required To Be Performed Off Duty But It Is The Contractor’s Determination As To How It Meets The Government’s Requirements. a. Na. All Training Is Conducted In A Duty Status. 10 attachment 1.b.(a): Can The Senior Technical Representative (str) Also Be The Pm? yes. However, It Is The Offeror’s Responsibility To Propose An Approach That Collectively Meets All Solicitation Requirements. 11 section L.3.(a).(i).(i).(a) States That The "page Limitation For Proposal Is Not To Exceed Fifteen (10) Pages." Please Verify The Page Limit Quantity. the Correct Page Limit Is 10. An Amendment To The Solicitation Criteria Is Issued Concurrent With This Answer Being Posted. 12 section L.3.(a).(i): Are The Staffing Plan, Key Personnel Resume, And Past Performance Reference (attachment 2) Excluded From The Technical Volume Page Limitation? yes. 13 section L.3.(a).(i): Is The Cover Page And Table Of Contents Excluded From The Page Limitation? yes. 14 will The Government Provide A Current Seniority List Consisting Of Hire Dates Only For The Incumbent’s Security Force So That Offerors Can Accurately Price Vacation And Other Leave Benefits? no. There Is No Requirement To Hire Incumbent Staff, But Offerors Are Encouraged To Make The Best Business Decision For Staffing That Meets The Solicitation Requirements. 15 does The Incumbent Currently Have The Contract Fully Staffed? If Not, What Are The Differences? the Government Declines To Respond As It Is Not Relevant To An Offeror’s Proposal Submission. 16 does The Incumbent's Staff Meet The Training And Clearance Requirements Of This Solicitation? a. If Not, What Are The Differences? b. Are The Incumbent's Staff Grandfathered In Terms Of The Training? the Government Declines To Respond As It Is Not Relevant To An Offeror’s Proposal Submission. 17 is There A Union With This Contract? a. If So, Can The Government Provide A Copy Of The Cba? yes. a. The Cba Will Be Amended Into The Posting Concurrent With This Answer Being Posted. 18 are The Alarm Monitors Self-relieving? yes. 19 since A Resume And Letter Of Intent Is Required For Key Personnel: a. Is There An Existing Pm (or Other Key Personnel Staff) Employed By The Incumbent Who Meets The Current Work Experience Referenced In The Sow? b. Does The Government Want The Successful Bidder To Retain These Key People Or Replace Them? c. If Retaining The Current Key People Is Desirable, Would The Government Consider Providing Their Names And Email Or Phone Number So That Offerors Can Contact Them? the Government Declines To Respond As It Is Not Relevant To An Offeror’s Proposal Submission. There Is No Requirement To Hire Incumbent Staff, But Offerors Are Encouraged To Make The Best Business Decision For Staffing That Meets The Solicitation Requirements. 20 are The Alarm Monitors And Pm Required To Wear Uniforms? a. If So, Please Provide A List Of Contractor Provided Items And Any Pertinent Specifications. no. The Government Will Provide Badges That Say “smc” For Additional Identification Purposes. a. Na. 21 is There Any Contractor Provided Equipment Or Supplies That Are Required? no, With The Exception Of The Vehicle Requirement Identified In The Solicitation. 22 for The Project Manager, The Sow Lists Three Duties Of Their Job: A. Ensure Resources, Assignments, Staff, And Training Are Administered; b. Update And Maintain All After-hours And Emergency Recall Information And Reference Materials; And C. Provide Monthly Metrics Data Reports. 17.with The Assumption That The Shift Lead Will Be Handling Most Of The Daily Supervisory Tasks, Does The Pm Have Any Other Duties And/or Responsibilities? determining The Method Of Performance Of The Sow Requirements Is The Responsibility Of The Offeror. 23 is This An Existing Requirement Or Is This A New Requirement? see The Answer To Question 6. 24 if This Is An Existing Effort; What Is The Prior Contract Award Amount, Name Of Incumbent, Period Of Performance, To Include The Dates Of The Final Option Period Exercised? yes, The Current Contract Was Awarded To Shiloh Services, Inc., Which Will Expire On 06/30/2025. The Government Declines To Provide The Dollar Value As More Than Enough Information Is Available To Price Including The Cba Now Amended Into The Solicitation. 25 is The Current Incumbent Contract Currently Fully Staffed With Qualified Personnel? the Government Declines To Respond As It Is Not Relevant To An Offeror’s Proposal Submission. 26 does The Current Incumbent Workforce Meet All Requirements Specified In The Sow? the Government Declines To Respond As It Is Not Relevant To An Offeror’s Proposal Submission. There Is No Requirement To Hire Incumbent Staff, But Offerors Are Encouraged To Make The Best Business Decision For Staffing That Meets The Solicitation Requirements. 27 a. Is There A Security Clearance Requirement? b. If So, What Level Of Security Clearance Is Required? c. Do All Incumbent Personnel Currently Meet All Of The Adjudicated Security Clearance Requirements? a-b. See The Dd 254 Attachment To The Rfq. c. The Government Declines To Respond As It Is Not Relevant To An Offeror’s Proposal Submission. There Is No Requirement To Hire Incumbent Staff, But Offerors Are Encouraged To Make The Best Business Decision For Staffing That Meets The Solicitation Requirements. 28 "are These Sca Personnel? please Provide A Wage Determination To Be Used For Pricing Purposes? which Occupation Code Listed In The Department Of Labor (dol), Wage [determination] Apply To The Requirement?" applicable Wage Information Is Provided Via The Current Amendment In The Form Of A Cba. 29 please Provide Any Uniform And/or Dress Code Requirements. the Only Applicable Standard Is Business Casual Or Inclement Weather Appropriate Clothing. 30 an Error Code Shows When Attempting To Open The Dd254 Provided. Please Clarify Security Clearance Requirements. the Rfq Posting Is Amended To Include An Updated File, To Now Properly Showing The Dd254. 31 the Work Specified Herein Shall Be Performed At The Naval Undersea Warfare Center, Division newport (nuwcdivnpt) Or The Naval Station, Newport Rhode Island (navsta) Designated or An Alternate Security Monitor Center. please Provide The Location(s) Of The Alternate Security Monitoring Center. all Primary And Alternate Facilities Of Physical Performance Takes Place At The Naval Undersea Warfare Center, Division Newport However Additional Sites Are Remotely Monitored. 32 do All Contract Employees Require Ri State And Federal Certifications For Dispatcher And Monitor Positions? no. 33 what Type Of Situations To Sme's Historically Respond To? how Many Times A Year On Average Do This Incidents Occur? see Sow. 34 4.5.1 Where Are The Temporary Storage And/or Gsa Security Containers Located, I.e. On The Nuwcd Compound, Off-site, Etc.? all Are Within The Nuwcdivnpt Compound. 35 on A Daily Basis, The Contractor Shall Support Tasks Using A Contractor Provided Vehicle In support Of 4.0 Tasks. The Vehicle Shall Display A Distinctive Contractor Emblem For Identification purposes. what Type Of Vehicle Is Required (cargo, Utility, Passenger)? are There Any Make/model/year, Etc. Requirements And/or Limitations? is There Any Relevant Historical Data Available Regarding Mileage, Storage And Offsite Fueling Allowances? is There Parking Available On The Nuwcd Compound? any Vehicle Registered And Inspected In The State Of Ri. no. no. Data Is Available As It Was Not Previously Required. yes 36 31. 5.2.1 The Contractor Shall Require Each Contractor Employee Performing Work At Any Nuwc division Newport Site, Who Has A Common Access Card (cac) And An Nmci Account To complete All Required Mandatory Training And Any Applicable Limited Audience Required training(s). The Contractor Shall Fill Out And Submit To The Government The Training Completion status Report, Gfi #25, Affirming All Mandatory Training And Any Applicable Limited Audience required Training(s) Are Completed. The Required Training And Required Training Schedule Is available At The Following Website: [will Be Provided At Award] Under Mandatory training Instructions. See The .pdf Mandatory Training Instruction – Contractors Only. for Pricing Purposes, Please Provide A List Of All Required Training, Number Of Hours Required For Completions, Government Or Contractor Provided, And Are They Otj Or Not. What Are Average Wait Times For Appointments And Issue?" all Required Training Is Virtual, Accessible From The Nuwcdivnpt Site, And Can Be Accomplished During A Standard Work Period While Performing Other Duties Of The Sow. 37 32. The Government Will Evaluate The Plan For Obtaining Personnel Security Clearances Within 30 Days Of The Start Of The Period Of Performance At The Required Level As Specified In The Dd254, Including Confirmation Of Existing Clearances, Details Of The Offeror's Process For Obtaining New Clearances, And The Schedule For obtaining Any Required New Personnel Security Clearances During The Life Of The Contract. is There A Transition Period? how Long? what Is The Security Clearance Level Required? see The L&m Attachment, And, More Specifically, The Pass Fail Evaluation Criteria For Clearance Requirements And Transition Period To Full Operation Tempo. 38 33. Technical Approach (a) Submit A Personnel Plan To Accomplish All Of The Statement Of Work Tasking. Page Limitation For proposal Is Not To Exceed Fifteen (10) Pages. please Clarify If It Is 15 Or 10 Page Limit For This Section. the Correct Page Limit Is 10. An Amendment To The Solicitation Criteria Is Issued Concurrent With This Answer Being Posted. 39 34. Staffing Plan, Attachment 3 - Staffing if The Offeror Is Proposing To Use Incumbent Personnel In Order To Maintain Continurity Of Operations, Can The Offeror Use Tbd Or Incumbent For The Staffing Plan Attachment? the Proposal Must Meet The Stated Solicitation Criteria Which Are Clear In This Matter. 40 35. Staffing Plan is There A Page Limit For The Staffing Plan? no. 41 36. Offeror Shall Provide A Mapping Of Any Company-specific Labor Categories It, Or Its Subcontractors, Proposes In the Staffing Plan To The Corresponding Government Standard Ecraft Labor Categories. Unless Specified already By The Government, Offeror Shall Propose Standard Ecraft Labor Categories Based On The descriptions Listed At: http://www.navsea.nayy.mil/home/warfare-centers/nuwcnewport/ link States ""www.navsea.nayy.mil’s Server Ip Address Could Not Be Found. please, Use The Following Url: Http://www.navsea.navy.mil/home/warfare-centers/nuwc-newport/partnerships/commercial-contracts/labor-categories/. 42 37. Is Eligibility To Become Ncic, Rilets, Nlets, And Cpic, As Retired Law Enforcement, Sufficient? Specifically In This Scenario What If The Individuals Do Not Currently Have “active” Certifications Into Those Systems. They Have Had Access In The Past And Would Be Eligible For Recertification. Will Their Resumes Meet The Requirements? the Fact That Someone Is “retired Law Enforcement” Does Not Automatically Qualify An Employee For Any Certifications Or Clearances. in Terms Of Incumbent Staff Certifications There Is No Requirement To Hire Incumbent Staff, But Offerors Are Encouraged To Make The Best Business Decision For Staffing That Meets The Solicitation Requirements. 43 as A Follow Up To Question #5, There Is A Request For Resumes. How Then Can We Provide Resumes Of Staff, Since Staff Won’t Be Assigned Until [award]. Pm And Sl Won’t And Can’t Be Determined Until Award And Set Schedule In Place. resumes Are Only Required For The Key Personnel Position And Not For All Employees. For Key Personnel That Are Not Current Staff Letters Of Intent Are Required. there Is No Requirement To Hire Incumbent Staff, But Offerors Are Encouraged To Make The Best Business Decision For Staffing That Meets The Solicitation Requirements. amendment #4: extended Closing Deadline To 02/18/2025 @ 1400 Est, To Afford Time To Respond To Questions From Industry. amendment #3: extended Closing Deadline To 02/07/2025 @ 1400 Est, To Afford Maximum Compeition. amendment #2: questions To Questions From Industry, Below: question # question answer 1 how Many Guards Are Being Requested? this Is The Responsibility Of The Offeror To Determine Based On The Requirements Stated In The Rfq And Attachments Thereto. 2 how Many Shifts Daily Are To Be Covered? the Number Of Shifts Is Determined By The Offeror. Any Firm Shift Requirements Are Contained In The Personnel Qualifications Attachment. 3 is 24/7 Coverage Being Requested. yes. 4 do Guards Need To Be Armed/unarmed. all Unarmed. 5 under The Pass/fail Requirement, If Work Is Being Performed At Government Facility How/why Does The Contractor Need To: • 2.1 Plan For Obtaining Personnel Clearances the Offeror Shall Provide, A Plan For Obtaining Personnel Clearances Within 30 Days Of The Start Of The Period Of Performance At The Required Level Specified In The Dd Form 254, Contract Security Classification Specification Attached To This Solicitation. The Plan Shall Include Confirmation Of Existing Personnel Clearances, Detail The Offeror’s Process For Obtaining New Clearances To Perform The Full Requirement By The Time Full Operational Tempo Is Reached Within 30 Days Of The Period Of Performance Start Date, And Outline The Schedule For Obtaining Any Required New Clearances During The Life Of The Contract. • There Is A Request For Resumes. How Then Can We Provide Resumes Of Staff, Since Staff Won’t Be Assigned Until Reward. Pm And Sl Won’t And Can’t Be Determined Until Award And Set Schedule Is In Place. please Clarify Need For Personnel Security Clearance. this Requirement Is Accurate As Stated And Is In Accordance With The Dd 254 Attached To The Rfq Which Will Be Included In The Resulting Award. 6 is There An Incumbent In Place Or Is This Anew Request? yes. The Incumbent Contractor Is Shiloh Services, Inc. amendment#1: - Added Dd254 Attached - Added Question Deadline, Which Expires 27-jan-2025 @ 1400 Est. Therefore, Please, Submit All Questions, Before That Deadline. please Read This Entire Notice Carefully As It Constitues The Only Notice That Will Be Issued. this Is A Combined Synopsis And Solicitation For Commercial Items Prepared In Accordance With The Format In Far Subpart 12.6-streamlined Procedures For Evaluation And Solicitation For Commercial Items, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Quotations Are Being Requested And A Written Solicitation Will Not Be Issued. Request For Quotation (rfq) Number Is N66604-25-q-0168. the Naval Undersea Warfare Center Division Newport (nuwcdivnpt) Has A Firm Fixed Price Requirement In Accordance With Attachment #1 Statement Of Work (sow) For The Following On-site Monitoring Services: line Item # 0001 For On-site Monitoring Services; Quantity 12 Months; Pop: 01-jul-2025 To 30-jun-2026 line Item # 0002 Option 1 For On-site Monitoring Services; Quantity 12 Months; Pop: 01-jul-2026 To 30-jun-2027 line Item # 0003 Option 2 For On-site Monitoring Services; Quantity 12 Months; Pop: 01-jul-2027 To 30-jun-2028 line Item # 0004 Option 3 For On-site Monitoring Services; Quantity 12 Months; Pop: 01-jul-2028 To 30-jun-2029 line Item # 0005 Option 4 For On-site Monitoring Services; Quantity 12 Months; Pop: 01-jul-2029 To 30-jun-2030 this Procurement Is Solicited As A Small Business Set-aside As Concurred With By The Nuwcdivnpt Office Of Small Business Program (osbp). The North American Industry Classification System (naics) Code For This Acquisition Is 561612; The Small Business Size Standard Is $29m. rhode Island Wd 2015-4089 Rev 26, Dated 04-09-2024, Applies. Incorporated Provisions And Clauses Are Those In Effect Through The Current Federal Acquisition Circular. The Provision At Far 52.212-1, Instructions To Offerors Commercial Items Applies To This Solicitation. The Provision At Far 52.212-3, Offeror Representations And Certifications Commercial Items Applies To This Solicitation. Clauses Far 52.209-11, Representation By Corporations Regarding Delinquent Tax Liability Or A Felony Conviction Under Any Federal Law, 52.212-5, Contract Terms And Conditions Required To Implement Statues Or Executive Orders-commercial Items, And Dfars 252.204-7009 Limitations On The Use Or Disclosure Of Third-party Contractor Reported Cyber Incident Information Apply To This Solicitation. 52.217-9 Option To Extend The Term Of The Contract (mar 2000) (navsea Variation I) (oct 2018) the Government May Extend The Term Of This Contract By Written Notice(s) To The Contractor Within The Periods Specified Below. If More Than One Option Exists, The Government Has The Right To Unilaterally Exercise Any Such Option Whether Or Not It Has Exercised Other Options. item(s) latest Option Exercise Date 7100 07/1/2025 7200 07/1/2026 7300 07/1/2027 7400 07/1/2028 item(s) latest Option Exercise Date 6100 8/30/2025 6200 8/30/2026 6300 8/30/2027 6400 8/30/2028 if The Government Exercises This Option, The Extended Contract Shall Be Considered To Include This Option Clause. the Total Duration Of This Contract, Including The Exercise Of Any Option(s) Under This Clause, Shall Not Exceed Five (5) Years, However, In Accordance With Paragraph (j) Of The Requirement Of This Contract Entitled "level Of Effort – Alternate I", If The Total Manhours Delineated In Paragraph (a) Of The Level Of Effort Requirement, Have Not Been Expended Within The Period Specified Above, The Government May Require The Contractor To Continue To Perform The Work Until The Total Number Of Manhours Specified In Paragraph (a) Of The Aforementioned Requirement Have Been Expended. (end Of Clause) the Following Addenda Or Additional Terms And Conditions Apply. Defense Priorities And Allocations Systems (dpas) Rating Is Do-c9. A Section 508 Does Not Apply. the Required Period Of Performance Is Listed In The Table Above, F.o.b. Destination Is Newport, Ri 02841. the Government’s Preferred Method Of Payment Is Electronic Payment Through Wide Area Workflow (wawf) Will Be Used. Please Confirm If Government Purchase Card Is An Acceptable Form Of Payment Within The Quotation. full Text Of Incorporated Far/dfars Clauses And Provisions Are Available At: Www.acquisition.gov/far this Solicitation Requires Registration With The System For Award Management (sam) Prior To Award, Pursuant To Applicable Regulations And Guidelines. Registration Information Can Be Found At Www.sam.gov the Quote Shall Include Price, Delivery Terms, A Technical Proposal In Accordance With The Information Contained In Attachment #2 Section L - Instructions For Submission Of Proposals And Section M – Evaluation Factors For Award And The Following Additional Information With Submission: Point Of Contact (including Phone Number And Email Address), Contractor Cage Code, And Contractor Duns. the Quotes May Be Submitted Via Email To The Below Address And Must Be Received On Or Before Monday, 29 Jan 2025 2:00pm Est. Offer Received After The Closing Date Are Considered To Be Late And Will Not Be Considered For Award. For Information On This Procurement, Contact: Kevin E. Silva At Kevin.e.silva2.civ@us.navy.mil Or 401-832-3558.

Details: This Item Is Set To Be Awarded Sole Source 56100_tab_0125_753 item 1: Steering Actuator, Overhaul 1. Scope 1.1 Intent. This Work Item Describes The Requirements For The Contractor To Overhaul The Rotary Vane Steering Actuator Assembly For The Starboard Steering System. 1.2 Government-furnished Property. mti item Description nsn/pn qty n actuator Overhaul Kit nsn: 2530-01-699-0680 pn: Rrm000445315 2 Ea. n hydraulic Coupling Kit nsn: 2530-01-699-0654 pn: Rrm000444570 2 Ea. 2. References coast Guard Drawings coast Guard Drawing 750-wmsl_100_44, Rev K, Unit 3320 Struct - Inner Bottom 2nd Deck Fr 89-98 (asc100332) coast Guard Drawing 750-wmsl-243-003, Rev B, Shipping & Unshipping Of Propulsion Shafting (asc243004) coast Guard Drawing 750-wmsl-556-004, Rev E, Steering Gear Hydraulic Diagram (asc556003) coast Guard Drawing 750-wmsl-556-022, Rev H, Steering Gear And Stern Gate Hydraulic Piping - Unit 3330 (asc556333-hy) coast Guard Drawing 750-wmsl-561-001, Rev D, Steering Gear Foundation (asc561001) coast Guard Drawing 750-wmsl-562-002, Rev C, Rudder (asc562002) coast Guard Drawing 750-wmsl-562-003, Rev D, Rudder Support System (asc562003) coast Guard Publications coast Guard Technical Publication (tp) 7182a, Swbs 561, Jan 2022, Steering Machinery Subsystem – Operation & Maintenance Manual coast Guard Technical Publication (tp) 7193, Swbs 561, Jan 2022, Steering System Operations And Maintenance Manual surface Forces Logistics Center Standard Specification 0000 (sflc Std Spec 0000), 2022, General Requirements surface Forces Logistics Center Standard Specification 0740 (sflc Std Spec 0740), 2022, Welding And Allied Processes surface Forces Logistics Center Standard Specification 3041 (sflc Std Spec 3041), 2022, Shipboard Electrical Cable Test surface Forces Logistics Center Standard Specification 5000 (sflc Std Spec 5000), 2022, Auxiliary Machine Systems surface Forces Logistics Center Standard Specification 6310 (sflc Std Spec 6310), 2022, Requirements For Preservation Of Ship Structures other References international Standard Organization (iso) 4406, 2021, Hydraulic Fluid Power - Fluids - Method For Coding Level Of Contamination By Solid Particles kongsberg Maintenance Manual Dmn000278736, Rev C, Kongsberg Steering Gear Type Sr And Sv mil-std-419, Sept 2021, Cleaning And Protecting Piping Tubing, And Fittings For Hydraulic Power Transmission Equipment 3. Requirements 3.1 General. 3.1.1 Cir. none. 3.1.2 Tech Rep. The Contractor Must Provide The Services Of Tech Reps In Accordance With The Following Subparagraphs. 3.1.2.1 The Contractor Must Provide The Services Of An Oem Authorized/ Licensed Tech Rep For The Kongsberg Steering Actuator To Accomplish The Following On Site: provide Manufacturer's Proprietary Information, Software, And Tools Pertinent To The Equipment/system. assist With Proper Repair Methods And Ensure Compliance With Manufacturer's Procedures And Standards During Disassembly, Inspection, Repair, Modification, Calibration, And Reassembly Of The Equipment/system. perform All Actual Repair Work On The Actuator. 3.1.2.1.1 Ensure The Tech Rep Is An Oem Certified Representative For The System/equipment Stated Above And Demonstrated On Their Résumé. 3.1.2.2 Tech Rep. The Contractor Must Provide The Services Of A Qualified Technical Representative Who Is Familiar With The Wmsl Steering System Hydraulic Power Units To Accomplish The Following On Site: advise On Manufacturer's Proprietary System Information. ensure Compliance With Manufacturer's Procedures And Standards During System Disassembly, Inspection, Repair, Modification, Calibration, And Reassembly Of The Equipment/system As Applicable. 3.1.2.2.1 Ensure The Tech Rep Has Experience With The System/equipment Stated Above And Demonstrated On Their Résumé. 3.1.2.2.2 Submit The Name And Résumé Of The Tech Rep To The Cor At The Arrival Conference. 3.1.3 Protective Measures. The Contractor Must Furnish And Install All Protective Measures In Accordance With Sflc Std Spec 0000, Paragraph 3.3.3 (vessel Component, Space, And Equipment Protection). 3.1.3.1 Protection Of Fine Surfaces. The Contractor Must Protect All Fine Surfaces In Accordance With Sflc Std. Spec 5000. 3.1.3.2 Hydraulic System Contamination Protection. The Contractor Must Maintain Existing Hydraulic Cleanliness In Accordance With Sflc Std. Spec 5000. 3.1.3.3 Maintain The Strictest Standards Of Cleanliness In Accordance With Mil-std-419 While Hydraulic System Is Open. Work On The Steering Hydraulics Is Not Permitted While Any Blasting, Grinding, Welding, Etc. Is Being Performed In, Or Adjacent To, The Steering Gear Space. 3.1.3.4 Hatch Opening Must Be Covered And Roped Off To Prevent A Falling Hazard To Personnel When Not In Use. note plastic Bags May Be Used Only When Arrangement Or Configuration Prevents The Use Of The Other Sealing Methods Specified Above. 3.1.4 Interferences. The Contractor Must Handle All Interferences In Accordance With Sflc Std Spec 0000, Paragraph 3.3.5 (interferences). Known Interferences Include, But Are Not Limited To The Following: access Plate (berp) Located Above The Port And Starboard Steering Actuator. piping electrical Wires padeye Plate Covers rudder Support Covers hydraulic Oil (approx. 560 Gals.) overhead ventilation Ducts insulation pipe Hangers/brackets note coast Guard Personnel Will Operate All Shipboard Machinery And Equipment. 3.2 Operational Test, Initial. Prior To Commencement Of Work, The Contractor Must, Under The Direction Of The Oem Tech Rep, Witness Coast Guard Personnel Perform An Initial Operational Test Of All Items Or Shipboard Devices To Be Disturbed, Used, Repaired, Or Altered, To Demonstrate Existing Operational Condition. Perform The Following Inspections. Use Data Sheet No. 1 (section 4 Of This Wi) To Record Results For Starboard Actuator Only. Submit A Cfr. 3.2.1 Verify That All Rudder Angle Indicators (manual Indicator On Actuator, Mcms Indicator, Local Indicator, And Remote Indicators On Bridge) Must Be Within A 2-degree Tolerance Throughout Range Of Motion. warning special Care Should Be Taken Not To Hold The Rudder Hard Over For More Than A Few Seconds At A Time To Avoid Overheating The System. 3.2.2 Starboard Steering Gear: In The Presence Of The Coast Guard Inspector, Place The 1a Hpu Online, With The Controller Set To ‘remote’, Cycle The Rudder From Zero To Port (hard-over), From Port To Starboard (hard-over), From Starboard To Port (hard-over) And From Port To Zero. On The Port To Starboard And Starboard To Port Transitions, Record The Time From 30 Degrees On One Side To 30 Degrees On The Other Side (speed Should Be 3 Degrees/second Or 20 (+/-1) Seconds Total). With The Rudder At Zero Degrees And The Hpu Running, Inspect All Hoses, Fittings And Seals For Leakage. 3.2.3 Set The Steering Controller To “local”. Using The Pushbuttons Operators On The Pump, Cycle The Rudder From Zero To 15 Degrees Port, From 15 Degrees Port To 15 Degrees Starboard And From 15 Degrees Starboard To Zero. It Is Not Necessary To Record Times On This Evolution – This Portion Of The Test Only Demonstrates That Local Control Can Be Achieved. Record The Result As Sat Or Unsat. 3.2.4 Switch To 1b Hpu And Perform The Same Tests To Complete The Starboard Steering Gear System Test. note the Cutter Is Currently Outfitted With Recessed Padeyes As Located On Cg Drawings 750-wmsl_100_44 And 750-wmsl-243-003 And Are In Place In The Hull Above Each Propeller And Rudder. Padeye Numbers Are 22, 23, 24, And 25 As Identified On Coast Guard Drawing 750-wmsl-243-003. access Covers For The Recessed Padeyes Are Not Required To Be Reinstalled. each Rudder Weighs Approximately 12,000 Lbs. 3.3 Rudder Support. The Contractor Must Ensure The Rudder Has Been Supported In Place To Allow Repairs Of The Steering Actuator Assembly. Coast Guard Divers Will Remove Metal Plate Covers To Access The Recessed Padeyes Above Each Rudder. The Contractor Must Pull Test All Existing Recessed Padeyes To 150% Of Their Maximum Expected Working Load For 10 Minutes. In No Case May A Padeye’s “expected Working Load” (a) Exceed The Tabulated Maximum Working Load For The Padeye’s Size Or (b) Exceed The Structure’s (that Padeye Is Attached To) Ability To Carry The Load. At Conclusion Of The Pull Test, Visually Inspect Each Padeye For Damage. note the Centerline Of The Rudder Post Is Located Forward Of Frame 96, Above The Stern Gate Utility Room And Forward Of An Inaccessible Void. If Additional Padeyes Are Necessary, It May Be Necessary To Clean And Gas Free These Spaces. 3.4 Hydraulic Reservoir Inspection. The Contractor Must Take Oil Samples For Testing Of Existing Oil From Each Reservoir And Send Out For Analysis. Label And Retain One Extra Oil Sample From Each System For Back-up Testing If Necessary. Drain All 2135 Th Hydraulic Oil From The Hpu Actuators And Reservoirs (approximately 550 Gallons Total), And Dispose Of In Accordance With All State, Local And Federal Regulations. Provide Cfr With Test Results. For Steering Gear Hydraulic System Details, See Coast Guard Drawings 750-wmsl-556-004 And 750-wmsl-556-022. 3.4.1 Remove Access Covers From Reservoirs And Storage Tanks. Take Samples Of Any Heavy Sludge Or Particulate Matter In The Tanks. Remove All Sludge And Debris And Wipe Down With Lint Free Rags. If Any Metallic Debris (metal Filings, Shavings, Babbitt) Is Present, Notify The Coast Guard Inspector Immediately. 3.4.2 When All Tanks Are Thoroughly Clean, And Just Prior To Closure Ensure All Foreign Objects Have Been Removed (e.g. Rags, Caps, Towels, Plugs). Contractor Must Present These Areas To The Coast Guard Inspector, Then Close In The Presence Of The Coast Guard Inspector. Install New Gaskets. 3.5 Steering Actuator Disassembly And Inspection. The Contractor Must, Under The Direction Of Or Performed By The Oem Tech Rep Support, Overhaul The Starboard Steering Actuators In Accordance With Oem Procedures. Rudder Foundation, Rudder Stock, And Rudder Support System Are Shown On Cg Dwgs 750-wmsl-561-001 And 750-wmsl-562-003. At A Minimum, The Contractor Must Renew The Following Parts: piston Seals hp Seals And Backing Strips lp Seals bearing Shells o-rings 3.5.1 Collect And Dispose Of All Drained Fluids In Accordance With All Federal, State, And Local Regulations. 3.5.2 Prior To Disassembly, Wipe Down The Exterior Of The Actuator Assembly And The General Area Near The Actuator To Remove Dirt And Contaminants. Maintain A Clean Environment When Working Around Open Hydraulic Equipment. 3.5.3 Actuator Internal Inspection. Inspect The Interior Of The Actuators (including, But Not Limited To, The Piston, Piston Dividers, Upper And Lower Housings, Hydraulic Coupling, Rotor, And Rudder Stock) For Any Indications Of Wear Or Damage. Submit A Cfr Documenting The Existing Condition Of The Actuators. 3.5.4 During Final Installation Of The Actuator, Ensure The Rudder And Rudder Stool Are Aligned, And The Actuator And Helm Are Set At 0 Degrees. warning foreign Materials Present A High Risk Of Severe Damage To Steering Gear System. Extra Precautions Are Required To Ensure Cleanliness Of The Hydraulic System. note suction Strainers Are Located Inside The Service Tanks. 3.6 Filters And Strainers, Renew. The Contractor Must Renew The Return, Charge, And Servo Filters On Each Of The Starboard Hpu’s. Close Up Filter Housings And Torque Fasteners In Accordance With Chapter 5.3 Of Cg Tech Pub 7182a. Renew The Suction Strainers And Reservoir Filter Breather On Each Hpu. 3.7 Manifold And Valve Inspection And Testing. The Contractor Must Clean, Inspect And Test The Hydraulic Manifold And Valves (i.e. Control, Relief, And Locking Valves) For The Starboard System. Clean And Visually Inspect All Parts For Defects, Deterioration, Dirt, Scale, Rust, Grease, And Foreign Material. Submit A Cfr. note hydraulic Hoses Life Is 12 Years 3.8 Hose Inspection. The Contractor Must Visually Inspect The Condition Of All Flexible Hoses Identified In Tables 1 And 2 And Submit A Cfr With The Following Information. Hoses That Require Renewal Will Be Subject To A Change Request. hose Physical Condition service Life Dates (date For Required Hose Renewal; If Not Specified, Add 12 Years To Installation Date) table 1 – Stbd Steering Gear (compartment: 2-94-1-e) hose Serial # length (in.) size (in.) part Number fitting #1 fitting #2 test Pressure (psi) sg-f-001 20 1 f20606-16-16-16c-20.00 female Jic female Jic 200 sg-f-002 26 1/2 f20606-8-8-8c-26.00 female Jic female Jic 375 sg-f-003 49 2 2651-32 female Jic male Cpv 5000 sg-f-004 35 2 2651-32 male Cpv male Cpv 5000 sg-f-005 31.5 3/4 f20606-12-12-12c-31.50 female Jic female Jic 200 sg-f-006 43 2 2651-32 male Cpv male Cpv 5000 sg-f-007 43 2 2651-32 male Cpv male Cpv 5000 sg-f-008 26.5 3/4 f2060606-12-12-12c-26.50 female Jic female Jic 200 sg-f-009 32 1/2 f2060606-8-8-8c-32.00 female Jic female Jic 375 table 2 – Port Steering Gear (compartment: 2-94-2-e) hose Serial # length (in.) size (in.) part Number fitting #1 fitting #2 test Pressure (psi) sg-f-011 20 1 f20606-16-16-16c-20.00 female Jic female Jic 200 sg-f-012 26 1/2 f20606-8-8-8c-26.00 female Jic female Jic 375 sg-f-013 31.5 3/4 f20606-12-12-12c-31.50 female Jic female Jic 200 sg-f-014 49 2 2651-32 female Jic male Cpv 5000 sg-f-015 35 2 2651-32 male Cpv male Cpv 5000 sg-f-016 26.5 3/4 f2060606-12-12-12c-26.50 female Jic female Jic 200 sg-f-017 43 2 2651-32 male Cpv male Cpv 5000 sg-f-018 43 2 2651-32 male Cpv male Cpv 5000 sg-f-019 32 1/2 f2060606-8-8-8c-32.00 female Jic female Jic 200 3.9 Hydraulic Oil Refilling. The Contractor Must Refill The Reservoirs With Hydraulic Oil Per Mil-h-17672, Symbol 2135, In Accordance With Cg Tech Pub 7182a. The Contractor Must Filter New Hydraulic Oil In Accordance With Sflc Std Spec 5000, Paragraph C2.1.2 Prior To Entry Into The Cutter’s Tanks Or System. Cleanliness Of Oil Must Be Iso 4406 Cleanliness Code Of 17/14 Or Better. note coast Guard Personnel Will Operate All Shipboard Machinery And Equipment. if Covered By A Separate Work Item, Final Testing Of The Steering System Is Only Required To Be Performed Once During This Availability. 3.10 Operational Test, Post Repairs. After Completion Of Work And In The Presence Of The Coast Guard Inspector, The Contractor Must Thoroughly Test And Demonstrate The Equipment Listed Below To Be In Satisfactory Operating Condition. Use Data Sheet No. 2 (section 4 Of This Wi) To Record Results For Starboard Actuator Only. Submit A Cfr. 3.10.1 Verify That The Rudders Operate Throughout Their Full Range With No Indications Of Binding And Appear Smooth During Operation. 3.10.2 All Rudder Angle Indicators (manual Indicator On Actuator, Mcms Indicator, Local Indicator, And Remote Indicators On Bridge) Must Be Within A 2-degree Tolerance Throughout Range Of Motion. 3.10.3 The Contractor Must Perform The Initial Startup Procedures In Accordance With Coast Guard Tp 7182, Paragraph 7-2. Upon Completion, Verify That The Relief Valves Are Properly Set In Accordance With Table 3. table 3 – Relief Valves service Description set Point (psig) pump Main System Relief Valve 1530 ± 25 relief Valve (charge) 217 ± 25 relief Valve (servo) 1450 ± 25 cross-line Relief Valve 1580 ± 25 warning special Care Should Be Taken Not To Hold The Rudder Hard Over For More Than A Few Seconds At A Time To Avoid Overheating The System. 3.10.4 Starting With The Starboard Steering Gear, And In The Presence Of The Coast Guard Inspector, Place The 1a Hpu Online, With The Controller Set To ‘remote’, Cycle The Rudder From Zero To Port (hard-over), From Port To Starboard (hard-over), From Starboard To Port (hard-over) And From Port To Zero. On The Port To Starboard And Starboard To Port Transitions, Record The Time From 30 Degrees On One Side To 30 Degrees On The Other Side (speed Should Be 3 Degrees/second Or 20 (+/-1) Seconds Total). With The Rudder At Zero Degrees And The Hpu Running, Inspect All Hoses, Fittings And Seals For Leakage. 3.10.5 Set The Steering Controller To “local”. Using The Pushbuttons Operators On The Pump, Cycle The Rudder From Zero To 15 Degrees Port, From 15 Degrees Port To 15 Degrees Starboard And From 15 Degrees Starboard To Zero. It Is Not Necessary To Record Times On This Evolution – This Portion Of The Test Only Demonstrates That Local Control Can Be Achieved. Record The Result As Sat Or Unsat. 3.10.6 Switch To 1b Hpu And Perform The Same Tests To Complete The Starboard Steering Gear System Test. 3.10.7 The Contractor Must Perform The Internal Leakage Test Per Paragraph 7.10 Of The Kongsberg Maintenance Manual Dmn000278736 For Both Port And Starboard Actuators. Measure The Total Leakage During Each Separate Segment Of Testing (port To Starboard Hard-over, Hard-over Starboard, Starboard To Port Hard-over, And Hard-over Port) And Submit The Results Via Cfr. 3.11 Oil Sample Analysis. The Contractor Must Take Oil Samples For Testing Of Existing Oil From Each Reservoir And Send Out For Analysis To Demonstrate Cleanliness Has Been Maintained. Submit A Cfr With The Oil Sample Analysis Report. 3.12 Touch-up Preservation. The Contractor Must Prepare And Coat All New And Disturbed Surfaces To Match Existing Adjacent Surfaces In Accordance With Sflc Std Spec 6310, Paragraph 3.1.13 (touch-ups And Minor Coating Repairs.) 4.0 Place Of Performance- Cgc Hamilton In Charleston Sc. 5.0 Period Of Performance- 17 Feb 2025 – 28 Feb 25 6.0 Points Of Contact. Uscg-sflc-lre Pl Asset Management: Cwo Matthew Temple, Matthew.temple@uscg.mil, 510-460-8195

Details: Description Request For Quotation Mode Of Procurement: Shopping 52.1(b) Date: _____________ Pr No.: _____________ Rfq No.: _____________ Company/business Name: Complete Office Address: Business/mayor’s Permit No: Tin: The Research Institute For Tropical Medicine – Department Of Health, Through Its Bids And Awards Committee (bac), Intends To Procure The Below Mentioned Items Through The Above-mentioned Mode Of Procurement Based On The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184. Please Quote Your Best Offer For The Item/s Described Herein, Subject To The Terms And Conditions Provided On This Request For Quotation (rfq). Submit Your Quotation Duly Signed By You, Or Your Duly Authorized Representative Within Five (5) Days Which Shall Be Addressed To The Ritm Bids And Awards Committee. A)the Following Documents Are Required To Be Submitted Along With Your Formal Quotation: Documentary Requirement Remarks Valid And Current Mayor’s/business Permit In Case Not Yet Available, You May Submit Your Expired Mayor’s Or Business Permit With The Official Receipt Of Renewal Application. However, A Copy Of The Latest Mayor’s Or Business Permit Shall Be Required To Be Submitted After Award Of Contract But Before Payment. Valid And Current Certificate Of Platinum Membership With Valid Annex “a” May Be Submitted In Lieu Of The Mayor’s/business Permit Philgeps Registration/membership Bir Form 2303 Company Name Registered In Sec/dti/cda Must Be The Same Registered Name In Bir Form 2303. Note: Incomplete Submission Of The Required Documents Will Be A Ground For Disqualification. For Any Clarification, You May Contact Us At The Contact Information Provided: Mae Marie E. Hernandez Bac Secretariat Head (632) 8807-2628 To 32 Loc. 210 And/or 240 E-mail Address: Procurement@ritm.gov.ph / Procurement_02@ritm.gov.ph Website: Www.ritm.gov.ph Instructions: Note: Failure To Follow These Instructions Will Disqualify Your Entire Quotation. (1)do Not Alter The Contents Of This Form In Any Way. (2)the Use Of This Rfq Is Highly Encouraged To Minimize Errors Or Omissions Of The Required Mandatory Provisions. If Another Form Is Used Other Than The Latest Rfq, The Quotation Shall Contain All The Mandatory Requirements/provisions Including Manifestation On The Agreement With The Terms And Conditions Below. (3)all Technical Specifications Must Be Complied With. Failure To Comply With The Mandatory Requirements Shall Render The Quotation Ineligible/disqualified. (4)quotations May Be Submitted Through Electronic Mail At: Procurement@ritm.gov.ph / Procurement_02@ritm.gov.ph. (5)quotations, Including Documentary Requirements, Received After The Deadline Shall Not Be Accepted. For Quotations Submitted Via Electronic Mail, The Date And Time Of Receipt Indicated In The Email Shall Be Considered. Terms And Conditions: bidders Shall Provide Correct And Accurate Information Required In This Form. any Interlineations, Erasures, Or Overwriting Shall Be Valid Only If They Are Signed Or Initialed By You Or Any Of Your Duly Authorized Representative/s. price Quotation/s, To Be Denominated In Philippine Peso, Shall Include All Taxes, Duties, And/or Levies Payable – If Applicable. quotations Exceeding The Approved Budget For The Contract Shall Be Rejected. in Case Of Two Or More Bidders Are Determined To Have Submitted The Lowest Calculated Quotation/lowest Calculated And Responsive Quotation, The Ritm-bac Shall Adopt And Employ “draw Lots” As The Tie-breaking Method To Finally Determine The Single Winning Provider In Accordance With Gppb Circular 06-2005. award Of Contract Shall Be Made To The Lowest Quotation Which Complies With The Technical Specifications, Requirements And Other Terms And Conditions Stated Herein. payment Shall Be Made After Delivery And Upon The Submission Of The Required Supporting Documents, I.e., Order Slip And/or Billing Statement, By The Supplier, Contractor, Or Consultant. Our Government Servicing Bank, I.e., The Land Bank Of The Philippines, Shall Credit The Amount Due To The Identified Bank Account Of The Supplier, Contractor, Or Consultant Not Earlier Than Twenty-four (24) Hours, But Not Later Than Forty-eight (48) Hours, Upon Receipt Of Our Advice. Please Note That The Corresponding Bank Transfer Fee, If Any, Shall Be Chargeable To The Account Of The Supplier, Contractor, Or Consultant. liquidated Damages Equivalent To One-tenth Of One Percent (0.1%) Of The Value Of The Goods Not Delivered Within The Prescribed Delivery Period Shall Be Imposed Per Day Of Delay. Ritm May Terminate The Contract Once The Cumulative Amount Of Liquidated Damages Reaches Ten Percent (10%) Of The Amount Of The Contract, Without Prejudice To Other Courses Of Action And Remedies Available To The Procuring Entity. Technical Offer/proposal: After Having Carefully Read And Accepted The Instructions And Terms And Conditions, I/we Submit Our Technical Proposals/quotations For The Item/s As Follows: Item # Qty/ Unit Item Description Supplier’s Compliance (indicate Brand And/or Model, Including Complete Specifications To Be Offered - Applicable) 1 1,522/piece Ballpen, Ballpoint Pen, 1.5mm Tip, Retractable, Black General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 2 30/piece Binder, 2-ring, 1.5ins, Black, Transparent, Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 3 134/piece Binder, 3-ring, A4 Size, 1.5" General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 4 18/piece Binder, 3-ring, Legal Size, 1" Thick General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 5 22/piece Binder, 3-ring, Legal Size, 2" Thick General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 6 38/piece Binder, D-ring, 3 Hole, A4 Size, Hardbound, Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 7 48/piece Board, Clipboard, With Metal Clip, Vinyl, A4 Size General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 8 1/pack Card, Pvc, White, Iso R-80 (54mm X 86 Mm) 100 Sheets /pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 9 385/pack Clear Book Refill, A4, 10 Sheets Per Pack, International Punching 11 Holes, Fits All, Resists Tearing, Heavy Duty Reinforced Binding Edge General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 10 10/box Clear Book Refill, For 3-hole Ring Binder, A4 Size, 100 Pieces/box General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 11 48/pack Clear Book Refill, Long, 10 Sheets Per Pack, International Punching 25 Holes, Fits All, Resists Tearing, Heavy Duty Reinforced Binding Edge General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 12 470/pack Clear Sheet, For 3 Hole Ring Binder, A4 Size,10 Sheets Per Pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 13 104/box Clip, Backfold, All Metal, Clamping: 12mm (-1mm) General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 14 2/piece Cork Board, With Aluminum Frame (24" X 36") Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 15 30/piece Data File Box, Made Of Chipboard, Black, 5'' X 9'' General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 16 232/roll Double Sided Tape, Adhesive, 1/4" Wide General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 17 5/roll Film, Film For Id - Hdp5000 Film, 1500 Counts General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 18 120/piece Folder, Archfile, 2 Holes, A4, 3'' Thickness, Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 19 20/piece Folder, Clear, Transparent Folder With Slide, A4 Size (210mm X 297mm), Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 20 20/piece Folder, Legal Size (216mm X 330mm),transparent Folder With Slide, Clear, Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 21 27/pack Folder, Tagboard, For A4 Size Documents, 100/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 22 1/piece Glue Gun, Heavy Duty With High And Low Dual Temperature Settings, 220 Volts, 60 Hertz, 40 Watts, Per Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 23 7/piece Glue Gun, Hot Melt, 20-60watts, Cordless, Rechargeable, For Glue Stick Big General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 24 120/piece Glue Stick, For Hot Melt Glue Gun General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 25 30/box Hanging Folders, Poly-reinforced Top Edge And Bottom Fold Provide Added Durability Standard Green Legal-sized Hanging Folders Lighter Interior Helps Prevent Time-wasting Misfiles Includes A Printable Label Sheet And 25 Clear 1/5-cut Tabs Product Dimensions - 16 X 9.65 X 2.5 Inches (40.6 X 24.5 X 6.4 Cm) Paper Type Material, 25pcs/box, Box General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 26 40/piece Id Case, Holder, With Lace, Plastic, Vertical, (id Case: 6cm X 10cm / Lace: 1/2" X 20") General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 27 300/set Id Case, Retractable With Horizontal Id Badge Holder (66mm X 98mm) General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 28 20/piece Id Clip, Suitable For Id Jacket Size 11.5 Cm X 9 Cm General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 29 60/piece Id Jacket, Clear Type, Size: 11.5 Cm X 9 Cm General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 30 5/piece Illustration Board, 760mm X 1000mm General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 31 12/box Laminating Film, 222mm X 286mm, 250 Micron, 100 Sheets/box General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 32 11/box Laminating Film, A3 Size, 250 Micron,100 Pieces/box General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 33 59/pack Laminating Film, A4 Size, 125 Micron, 25 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 34 54/pack Laminating Film, A4 Size, 250 Micron, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 35 186/piece Magazine File Box, Large Size, Made Of Chipboard General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 36 79/piece Marker Pen Type, Fade And Water-resistant, Quick-drying, Ap Certified Non-toxic Formula, Ultra-fine Point, 0.05mm, Black, Per Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 37 5/pack Marker, Glassboard Marker, 4 Pcs Per Pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 38 110/pad Note Pad, Stick On, Lined, Yellow, 152.4mm X 101.6mm (6" X 4") General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 39 1/case Notebook, Spiral, Color: White, Cleanroom Spiral Notebook, 5.5'' X 8.5'', (140mm X 216mm), 50 Pcs/case General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 40 20/pack Onion Skin , Size: A4, 50 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 41 2/piece Organizer, Desk , Stainless Steel , (size: H:5" X W:5.5" X L:8.7", Black General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 42 2/piece Paper Cutter, Wooden, Brown, B5 Size (17.6cm X 25.0cm), Easy Adjustment For Cutting Desires With Secured Sliding Paper Size Marker General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 43 50/pack Paper Sticker, High-gloss, 8.5 X 11'', Pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 44 110/pack Paper Sticker, Matte, A4 Size, Green, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 45 10/pack Paper Sticker, Matte, Blue, A4 Size, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 46 10/pack Paper Sticker, Matte, Indigo, A4 Size, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 47 10/pack Paper Sticker, Matte, Orange, A4 Size, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 48 10/pack Paper Sticker, Matte, Pink, A4 Size, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 49 10/pack Paper Sticker, Matte, Red, A4 Size, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 50 35/pack Paper Sticker, Matte, Yellow, A4 Size, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 51 13/pack Photo Paper, Matte, Size: A4, 146gsm, 100 Sheets/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 52 20/pack Photo Paper, Photo, A3 Size, High Gloss, 230 Gsm, 20 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 53 50/ream Photocopy Paper, Letter Size 8.5x11'', 80gsm Substance 24, Ream General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 54 1/roll Plastic Cover, Transparent, Gauge 15 Hard (thickness), 48 X 50 Yards Per Roll General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 55 10/roll Property Tag, Polyester Labels, Color Solid Green, Pre-printed, 3.5" X 3.5", Non-erasable, Non-tearable, Waterproof, Can Stand For Hot And Cold Temp, Luding Resin Ribbon, 102mm X 75m For Gc420t Printer, Roll General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 56 6/roll Property Tag, Polyester Labels, Color White, Pre-printed, 2" X 1", Non-erasable, Non-tearable, Strong Adhesive Can Stand For Hot And Cold Temp, Including Resin Ribbon 56mm X 75m, 2500 Pieces/roll *item Must Be Compatible With Gc420t Printer. General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 57 138/piece Record Book, 150 Pages, Size: 214mm X 278mm Min General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 58 4/bundle Ring Binder, 84 Rings, Plastic, 64mm X 1.2m, 10 Pieces/bundle General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 59 332/piece Sign Pen, Liquid/gel Ink, 1.0 Mm Needle Tip, Blue General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 60 60/piece Sign Pen, Liquid/gel Ink, 1.0 Mm Needle Tip, Red General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. Financial Offer/proposal: Please Quote Your Best Offer For The Item/s Below. Please Do Not Leave Any Blank Items. Indicate “0” If Item Being Offered Is For Free: Item # Qty/ Unit Item Description Abc Price Proposal Unit Cost Price Proposal Total Cost 1 1,522/piece Ballpen, Ballpoint Pen, 1.5mm Tip, Retractable, Black General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 25,874.00 2 30/piece Binder, 2-ring, 1.5ins, Black, Transparent, Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 4,539.30 3 134/piece Binder, 3-ring, A4 Size, 1.5" General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 16,750.00 4 18/piece Binder, 3-ring, Legal Size, 1" Thick General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 1,944.00 5 22/piece Binder, 3-ring, Legal Size, 2" Thick General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 3,190.00 6 38/piece Binder, D-ring, 3 Hole, A4 Size, Hardbound, Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 8,251.32 7 48/piece Board, Clipboard, With Metal Clip, Vinyl, A4 Size General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 2,400.00 8 1/pack Card, Pvc, White, Iso R-80 (54mm X 86 Mm) 100 Sheets /pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 1,210.00 9 385/pack Clear Book Refill, A4, 10 Sheets Per Pack, International Punching 11 Holes, Fits All, Resists Tearing, Heavy Duty Reinforced Binding Edge General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 7,700.00 10 10/box Clear Book Refill, For 3-hole Ring Binder, A4 Size, 100 Pieces/box General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 2,829.80 11 48/pack Clear Book Refill, Long, 10 Sheets Per Pack, International Punching 25 Holes, Fits All, Resists Tearing, Heavy Duty Reinforced Binding Edge General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 936.00 12 470/pack Clear Sheet, For 3 Hole Ring Binder, A4 Size,10 Sheets Per Pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 16,450.00 13 104/box Clip, Backfold, All Metal, Clamping: 12mm (-1mm) General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 1,687.92 14 2/piece Cork Board, With Aluminum Frame (24" X 36") Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 1,440.00 15 30/piece Data File Box, Made Of Chipboard, Black, 5'' X 9'' General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 2,802.30 16 232/roll Double Sided Tape, Adhesive, 1/4" Wide General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 15,080.00 17 5/roll Film, Film For Id - Hdp5000 Film, 1500 Counts General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 94,170.00 18 120/piece Folder, Archfile, 2 Holes, A4, 3'' Thickness, Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 10,200.00 19 20/piece Folder, Clear, Transparent Folder With Slide, A4 Size (210mm X 297mm), Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 180.00 20 20/piece Folder, Legal Size (216mm X 330mm),transparent Folder With Slide, Clear, Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 200.00 21 27/pack Folder, Tagboard, For A4 Size Documents, 100/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 8,286.30 22 1/piece Glue Gun, Heavy Duty With High And Low Dual Temperature Settings, 220 Volts, 60 Hertz, 40 Watts, Per Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 924.00 23 7/piece Glue Gun, Hot Melt, 20-60watts, Cordless, Rechargeable, For Glue Stick Big General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 4,200.00 24 120/piece Glue Stick, For Hot Melt Glue Gun General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 840.00 25 30/box Hanging Folders, Poly-reinforced Top Edge And Bottom Fold Provide Added Durability Standard Green Legal-sized Hanging Folders Lighter Interior Helps Prevent Time-wasting Misfiles Includes A Printable Label Sheet And 25 Clear 1/5-cut Tabs Product Dimensions - 16 X 9.65 X 2.5 Inches (40.6 X 24.5 X 6.4 Cm) Paper Type Material, 25pcs/box, Box General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 28,500.00 26 40/piece Id Case, Holder, With Lace, Plastic, Vertical, (id Case: 6cm X 10cm / Lace: 1/2" X 20") General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 1,760.00 27 300/set Id Case, Retractable With Horizontal Id Badge Holder (66mm X 98mm) General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 13,098.00 28 20/piece Id Clip, Suitable For Id Jacket Size 11.5 Cm X 9 Cm General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 194.00 29 60/piece Id Jacket, Clear Type, Size: 11.5 Cm X 9 Cm General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 1,855.80 30 5/piece Illustration Board, 760mm X 1000mm General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 346.50 31 12/box Laminating Film, 222mm X 286mm, 250 Micron, 100 Sheets/box General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 11,820.00 32 11/box Laminating Film, A3 Size, 250 Micron,100 Pieces/box General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 19,580.00 33 59/pack Laminating Film, A4 Size, 125 Micron, 25 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 8,850.00 34 54/pack Laminating Film, A4 Size, 250 Micron, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 7,020.00 35 186/piece Magazine File Box, Large Size, Made Of Chipboard General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 8,511.36 36 79/piece Marker Pen Type, Fade And Water-resistant, Quick-drying, Ap Certified Non-toxic Formula, Ultra-fine Point, 0.05mm, Black, Per Piece General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 9,124.50 37 5/pack Marker, Glassboard Marker, 4 Pcs Per Pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 3,000.00 38 110/pad Note Pad, Stick On, Lined, Yellow, 152.4mm X 101.6mm (6" X 4") General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 19,324.80 39 1/case Notebook, Spiral, Color: White, Cleanroom Spiral Notebook, 5.5'' X 8.5'', (140mm X 216mm), 50 Pcs/case General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 34,715.00 40 20/pack Onion Skin , Size: A4, 50 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 3,465.00 41 2/piece Organizer, Desk , Stainless Steel , (size: H:5" X W:5.5" X L:8.7", Black General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 3,300.00 42 2/piece Paper Cutter, Wooden, Brown, B5 Size (17.6cm X 25.0cm), Easy Adjustment For Cutting Desires With Secured Sliding Paper Size Marker General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 1,424.00 43 50/pack Paper Sticker, High-gloss, 8.5 X 11'', Pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 2,599.00 44 110/pack Paper Sticker, Matte, A4 Size, Green, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 6,050.00 45 10/pack Paper Sticker, Matte, Blue, A4 Size, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 550.00 46 10/pack Paper Sticker, Matte, Indigo, A4 Size, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 550.00 47 10/pack Paper Sticker, Matte, Orange, A4 Size, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 550.00 48 10/pack Paper Sticker, Matte, Pink, A4 Size, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 550.00 49 10/pack Paper Sticker, Matte, Red, A4 Size, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 550.00 50 35/pack Paper Sticker, Matte, Yellow, A4 Size, 10 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 1,925.00 51 13/pack Photo Paper, Matte, Size: A4, 146gsm, 100 Sheets/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 7,150.00 52 20/pack Photo Paper, Photo, A3 Size, High Gloss, 230 Gsm, 20 Pieces/pack General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 7,420.00 53 50/ream Photocopy Paper, Letter Size 8.5x11'', 80gsm Substance 24, Ream General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 8,500.00 54 1/roll Plastic Cover, Transparent, Gauge 15 Hard (thickness), 48 X 50 Yards Per Roll General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 2,750.00 55 10/roll Property Tag, Polyester Labels, Color Solid Green, Pre-printed, 3.5" X 3.5", Non-erasable, Non-tearable, Waterproof, Can Stand For Hot And Cold Temp, Luding Resin Ribbon, 102mm X 75m For Gc420t Printer, Roll General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 90,090.00 56 6/roll Property Tag, Polyester Labels, Color White, Pre-printed, 2" X 1", Non-erasable, Non-tearable, Strong Adhesive Can Stand For Hot And Cold Temp, Including Resin Ribbon 56mm X 75m, 2500 Pieces/roll *item Must Be Compatible With Gc420t Printer. General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 17,532.90 57 138/piece Record Book, 150 Pages, Size: 214mm X 278mm Min General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 6,486.00 58 4/bundle Ring Binder, 84 Rings, Plastic, 64mm X 1.2m, 10 Pieces/bundle General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 751.92 59 332/piece Sign Pen, Liquid/gel Ink, 1.0 Mm Needle Tip, Blue General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 13,270.04 60 60/piece Sign Pen, Liquid/gel Ink, 1.0 Mm Needle Tip, Red General Requirements 1.) Certification From The Bidder That The Items/products Offered Are Original And Brand New Upon Delivery. 2.) Product Brochure Of Specific Product/item Being Offered Indicated In The Bid Proposal. 2,398.20 Delivery Period: 30 Working Days Total Offered Quotation In Words: ______________ In Figures: ______________ Price Validity: ________________ Payment Terms: Thirty (30) Calendar Days Payment Details: Banking Institution: _________________________________________________ Account Number: __________________________________________________ Account Name: _________________________________________________ Branch: _________________________________________________ Note: Only The Actual Amount Of The Accepted Items Shall Be Paid. ___________________________ Signature Over Printed Name Of Authorized Representative ___________________________ Position/designation ___________________________ Office Telephone/fax/mobile Nos. ___________________________ Email Address/es

Details: This Pre-solicitation Notice Is Not A Request For Proposal. All information Needed To Submit Sf330 Documents Are Contained herein. No Additional Solicitation Package Or Technical information Will Be Issued. project: 544-25-125 Replace Dental Vacuum System work Location: Wm. Jennings Bryan Dorn Va Medical Center, Columbia, Sc 29209 estimated/target Completion Period: 145 Calendar Days After Award. construction Magnitude: Between $100,000 And $250,000. naics: 541330 - Engineering Services small Business Standard: $25.5 Million set-aside: 100% Service-disabled Veteran-owned Small Business (sdvosb) site Visits Will Not Be Arranged During This Phase. the Anticipated Award Date Of The Proposed A-e Contract Is On Or Before September 30, 2025. sf 330 Date Of Receipt/due Date: Interested Firms Having The Capabilities To Perform This Work Must Submit One (1) Electronic Sf 330 And Attachments (if Any) No Later Than (nlt) 12:00 Pm (est) January 13, 2025. ***attention*** Acknowledgement E-mails Will Be Sent From The Co Upon Receipt Of A Submission. If An Acknowledgement Is Not Returned, The Firm Should Contact The Co At Christopher.jenkins@va.gov And 478-595-2794. project Overview: the Columbia Va Health Care System Requires A Designed Solution To Repair Or Replace The Dental Vacuum System To Include All Piping, Pumps, Vacuums, Filters, Separators, Valving, Motors, Starters, Controllers, And All Other Necessary Components To Provide A Completely New System. The Current System Is Not Functioning Properly And Believed To Be Caused By The Current Configuration, Component Locations, And Length Of Installed Vacuum Piping. the End Result Of The Contract Is A Complete Set Of Construction Documents To Repair Or Replace The Existing Dental Vacuum System That Are Prepared For Solicitation For Construction. sdvosb Set-aside: this Requirement Is A 100% Set-aside For Service-disabled Veteran-owned Small Businesses Under The Authority Of 38 U.s.c. 8127(d). To Be Eligible For Award The Sdvosb You Must Be Considered Small Under The Relevant Naics Code. Sdvosb Contractors Must Be Verified And Viewable In Sba Vetcert: Https://veterans.certify.sba.gov/ Prior To Submission Of Proposal And Prior To Award Of Contract With Vaar 804.1103-70. Status As A Qualified Sdvosb Concern Is Under The Authority Of 38 Cfr Part 74 In Accordance With The Va Acquisition Regulation (vaar) Part 819. Any Person, Persons, Or Business Entity Suspected Of Misrepresenting Itself For The Purpose Of Securing A Government Contract May Be Criminally Investigated And Prosecuted For Fraud Against The United States Of America. Parties Found Misrepresenting Their Status Also Risk Debarment From Further Government Contracts. Eligibility Determination Is Performed By The Center For Veterans Enterprise (cve). Eligible Sdvosb Concerns Must Also Be Registered At The Following Websites: system For Award Management (sam): Https://www.sam.gov vets-4212 Federal Contractor Reporting Https://www.dol.gov/agencies/vets/programs/vets4212 important Notice: Prior To Submitting A Proposal Under This Sdvosb Set- Aside Solicitation; Offerors Must Apply For And Receive Verification From The Department Of Veteran Affairs Center For Veterans Enterprise (cve) In Accordance With 38 Cfr Part 74 And Vaar 819.70 By Submission Of Documentation Of Veteran Status, Ownership And Control Sufficient To Establish Appropriate Status. All Offerors Are Urged To Contact The Cve And Submit The Aforementioned Required Documents To Obtain Cve Verification Of Their Sdvosb Status If They Have Not Already Done So. for A Service-disabled Veteran Owned Small Business (sdvosb) To Be Considered As A Prospective Contractor, The Firm, Including Joint Ventures, Must Be Verified And Registered In The Department Of Veteran Affairs (va) Office Of Small & Disadvantaged Business Utilization (osdbu) Sba Vetcert: Https://veterans.certify.sba.gov/ And Registered In The System For Award Management (sam) Database (www.sam.gov) At Time Of Submission Of Their Qualifications. Failure Of A Prospective Sdvosb To Be Verified By The Center For Veterans Enterprise (cve) At The Time The Sf 330 Is Submitted Shall Result In Elimination From Consideration. All Joint Ventures Must Be Cve Verified At Time Of Submission And Submit Agreements That Comply With 13cfr 125.15 Prior To contract Award. in Order To Assure Compliance With Far Clauses, 52.219-14 Limitations On subcontracting (deviation 2019-01) And Vaar 852.219-10, Va Notice Of Total service-disabled Veteran-owned Small Business Set-aside (jul 2019) (deviation), All Firms Submitting A Sf 330 For This Pre-solicitation Notice Are required To Indicate What Percentage Of The Cost Of Contract Performance Will Be Expended On The Concerns Employees And In Which Discipline(s) And Percentage Of Cost Of Contract Performance To Be Expended (and In What Disciplines) By Any Other Consultant/subcontractor Or Otherwise Used Small Or Large Business Entity(s). Any Consultant/subcontractor Or Otherwise Business Entity(s) Used Must Be Identified By Name, Office Location And Size/type Of Business (i.e. Sdvosb, Vosb, 8(a), Small, Large, Etc.). Failure To Provide This Information Will Deem The Firm S Sf 330 Submittal As Nonresponsive And Preclude Further Evaluation. far Part 36.6 (brooks Act) Selection Procedures Apply. The A-e Services Listed Herein Is Being Procured In Accordance With The Brooks Act (public Law 92-582) As Implemented In Far 36.6 And Vaar 836.6. Pursuant To Far, The Firm Responding To This Requirement Must Be Permitted, By Law, To Practice The Professions Of Architecture Or Engineering And Meet All Required Qualifications For The State Of Georgia. sf330s Shall Be Organized In The Following Order: cover Sheet (one-page Limit) design Team Background With Locations Of Supporting Offices (one-page Limit) design Team Organizational Structure With Key Discipline Roles (one-page Limit) factor 1 Specialized Experience (one Page Per Project Limit) factor 2 - Professional Qualifications (one Page Per Resume Limit) factor 3 Past Performance Summary Sheet (one-page Limit) factor 4 - Capacity (one-page Limit) factor 5 Knowledge Or Location (one-page Limit) factor 6 Sdvosb Inclusion Statement (one-page Limit) full Cpars/ppqs Documentation For Factor 1 Projects (20-page Limit) additional Information (10-page Limit) sf330s Received Out Of Sequence Will Be Viewed Negatively. sf330 Specific Requirements: all Sf330 Pages Shall Be Pdf Searchable For Items 1 Through 11 And Item 13. Full Cpars And Ppqs May Be Scanned. start Each Factor Response On A New Page. use No Less Than 11-point Font. all Text And Images Containing Text Is Legible When Printed On 8.5 X 11 Paper. The Evaluation Board Will Not Seek Clarification Regarding Illegible Text. primary Selection Criteria (listed In Descending Order Of Importance): factor 1 specialized Experience (sections F, G And H): Specialized Experience And Technical Competence In The Design And Construction Period Services Will Be Required To Perform Throughout The Life Of The Contract. Projects Experience Pertains To The Types, Size, Recency, Cost, And Complexity Of Work Previously Or Currently Being Performed By The Offeror That Is Comparable To The Work Covered By This Solicitation. page Limit One Page Per Project. Five-page Total For Factor 1. Information Provided On Additional Pages Beyond The One Page Per Project Limit Or Beyond The Five-page Total Limit Will Not Be Included With The Review. relevant Project Experience: Submit Five (3) Projects That Meet All Criteria Shown Below. relevant Project Type Design-bid-build Projects Involving Site Investigation, Schematic Design, Design Development, And Construction Documents. Dental Vacuum System Replacements, Renovations Of Dental Clinics That Include New Dental Vacuum Systems, And New Building Construction That Include New Dental Vacuum Systems Are Acceptable Project Types. Masterplan And Rfp Development For Design-build Contracts Will Not Be Viewed As Relevant. relevant Project Size Systems Service Five Dental Chairs Or More. relevant Project Recency Project Construction Must Be Complete Or Substantially Complete Within The Past Five Years Of The Solicitation Due Date. Substantially Complete Is Defined As 80% Or Greater Of The Construction Project Is Complete At The Time Of The Solicitation Due Date. relevant Project Cost - Construction Project Cost Must Be Greater Than $75,000 relevant Project Complexity The Project Narrative Description Must Indicate Experience With All The Following Criteria: designing Main Vacuum Systems That Include Amalgam Separators For Dental Service Lines. designing Infection Control Risk Mitigation Plans designing New Pump/vacuum Drive And Controller System the Relevant Project Criteria Listed Above Is The Minimal Information Required For Acceptable Project Relevance. Additional Value Will Be Considered For Projects Which Convey Expertise With The Following Categories And Will Potentially Increase The Overall Rating For This Factor. Projects That Do Not Convey Additional Value Expertise Will Not Be Considered A Weakness. Additional Value Expertise Includes: experience With The Submitting Firm Serving As The Prime Contractor Leading A Multi-discipline Team Through Investigative, Design, Solicitation, And Construction Period Services. These Services Must Be Documented For Each Project Narrative. designing Hazardous Material Abatement Plans experience With Recent Projects Intended To Support Service Line Dental Service Lines. va Projects Showing Documented Experience With Implementing Va Design Guides And Standards From The Technical Information Library. experience With Recent Projects Located In The Columbia, Sc, South Carolina Midlands Area, Or Adjacent Counties. experience With Recent Projects That Include Implementing Va Cad And Bim Standards. submissions Shall Include No More And No Less Than Three (3) Type Projects Of Recent And Relevant Government And Private Experience Projects Similar In Type, Size, Recency, And Complexity, Cost, And Experience With The Type Of Projects/competence Above. section G Will Used To Evaluate The Prior Experience Of The Prime Firm And Any Key Subcontractors Working Together As A Cohesive Unit On The Provided Relevant Projects. An Acceptable Rating Will Be Given If All Key Disciplines Are Shown, And Each Discipline Participated With At Least One Project Listed On Section G. Proposed Design Team Members That Do Not Have Experience With Any Of The Five Submitted Example Projects As Shown In Section G Will Be Viewed Negatively. factor 2 professional Qualifications (sections C Through E) Necessary For Satisfactory Performance Of Required Service. The Ae Shall Demonstrate They Are Able To Sign And Stamp Each Drawing By Individuals Licensed In Any State In The United States For The Key Positions Listed Below. The Design Firm And A-e Staff Representing The Project Must Be Licensed To Practice In Any State Of The United States Of America. Provide Professional License Numbers And/or Proof Of Licensure. The Evaluation Shall Consider The Specific Experience (minimum Of Five Years) And Qualifications (i.e., Education, Training, Registration, Certifications, Overall Relevant Experience, And Longevity With The Firm As Full-time Employees) Of Personnel Proposed For Assignment To The Project, And Their Record Of Working Together As A Team When Evaluating Professional Qualifications. The Lead Designer In Each Discipline Must Be Registered To Sign Drawings In Each Discipline Must But Does Not Have To Be Registered In The State Where The Project Is Located. The Licensed Professional Must Hold Current Licensure For Said Discipline To Practice In Any State Of The United States Of America. Engineer-in -training (eit) Is Not Considered A Professional Licensure. page Limit One Page Limit Per Position Resume 8 Pages Total For Factor 2. Information Provided On Additional Pages Beyond The 8-page Limit Will Not Be Included With The Review. resume Requirements - A Resume For Each Of These Key Positions Must Be Provided Identifying Their Specific Role, Via Section E In The Sf330. Key Positions And Disciplines Required For This Project Include, But Are Not Limited To, The Lists Of Professionals With Required Licensure And Preferred Licensure Below. An Unacceptable Rating May Be Given If Resumes Are Not Provided For All Roles Listed. positions Requiring Professional Licensure. Not Providing The Professional Licensure Will Be Viewed Negatively And Will Not Be Compliant With The Solicitation. architect mechanical Engineer electrical Engineer fire Protection Engineer plumbing Engineer key Positions With Preferred Qualifications. Design Team Professionals That Have Obtained The Indicated Preferred Licensure May Be Viewed More Favorably. Not Providing The Professional Licensure Will Not Be Viewed Negatively And Will Not Reduce The Overall Rating For This Factor. Higher Value Will Be Given For Professionals With The Preferred Professional Licensure. quality Control Manager - Either Cqm, Cqe, Lean Six Sigma Black Belt, Or Experience With Minimum Five Projects Were Served As Qc Manager. project Manager - Project Management Professional (pmp) Certification Or More Than 10 Years Experience With Managing A/e Design Projects. construction Cost Estimator - Aspe Certified Professional Estimator (cpe) Certification multi-function Roles Are Allowable For The Following Positions And May Be Shown As Multi-role Positions On The Resumes: mechanical And Plumbing Engineering. architect, Seps Manager, Bim Manager, Interior Designer electrical Engineer And Rcdd project Manager And Quality Control Manager include The Home Office Location For Each Key Discipline Identified On Each Respective Resume In Section E Block 15. the Criteria Listed Above Is The Minimal Information Required For Acceptable Professional Qualifications. Additional Value Will Be Considered For Each Key Position And Will Potentially Increase The Overall Rating For This Factor And Shall Not Exceed The Prescribed Page Limit. key Personnel Having Greater Than 10 Years Experience In The Practicing Field. key Personnel With Greater Than Five Years Employment With The Proposed Design Team Firm. va Design And Construction Experience Within The Past Five Years. any Other Information The Design Team Wishes To Include For This Factor So Long As The Page Limit Is Not Exceeded. factor 3 past Performance (section H): Past Performance Will Be Evaluated On Contracts With Government Agencies And Private Industry In Terms Of Cost Control, Quality Of Work, And Compliance With Performance Schedules Along With The Firm S History Of Design Error, Omission, And/or Deficiency Claims. past Performance Will Be Evaluated For All Projects Provided In Section F. The Contractor Performance Assessment Rating System (cpars) Database Will Be Reviewed To Evaluate The Projects That Have A Va Cpars Entry. Va Cpars Are Not Required To Be Submitted With The Sf330 Submission. However, If The Va Cpars Is Not Included With The Sf330 Submission, Then The Contract Number For The Project Must Be Submitted For Each Project Provided In Section F So Cpars Can Be Reviewed In The Database. Please Note We Are Unable To Review Any Cpars From Other Federal Agencies, Outside Of The Va. for Any Project That Does Not Have Va Cpars Data Available, A Past Performance Questionnaire (ppq) Is Required To Be Submitted With The Sf330. If The Firm (prime Or Subcontractor) Was Not The Prime Contractor On Any Project Submit-ted In The Sf330 A Ppq Must Be Provided Listing Their Specific Role As A Subcontractor. The Ppq Should Be Rated And Signed By The Evaluator. In The Event That A Firm Does Not Receive A Requested Complete Ppq From An Evaluator Prior To The Time For Submission, The Firm Shall Submit The Partially Completed Ppq With Section 1 And The Evaluator Information In Section 2 Completed. Ensure A Poc Is Listed With The Project Title/contract Number. The Va Will Make Reasonable Attempts To Contact The Poc Upon Submission For Ppq Completion. the Government May Also Consider Additional Performance Related Information Regarding The Firm, To Include Customer Inquiries, Government Databases, Publicly Available Sources, And Additional Projects In Cpars. The Government Reserves The Right To Contact Any Poc Listed On A Cpars Report Or Ppq. If Appropriate, The Record Of Significant Claims Against The Firm Because Of Improper Or Incomplete Architectural And Engineering Services May Be Evaluated. failure To Provide Requested Data, Accessible Points Of Contact, Or Valid Phone Numbers Will Result In A Firm Being Considered Less Qualified. The Information For This Factor Shall Be Provided In Section H Of The Sf 330. for Ppqs, Please Utilize The Attached Ppq Document. Completed Ppqs Should Be Incorporated Into The Sf 330 Directly. Ppqs Should Not Be Submitted To The Vha Pcac Directly. Any Cpars And Ppqs Will Not Be Counted Towards The Page Limitations For This Submission. However, Any Narratives Provided For Past Performance In Section H Will Be Counted Toward The Page Limit. page Limit Provide No More Than One Page Total For This Factor For The Summary Page. Full Cpars/ppq Documentation Shall Be Included On Additional Pages With The Sf330 And Will Not Count Towards The Total Page Count. provide A Summary Page That Provides The Factor S Required Information. For Each Of The Five Projects, Provide The Following Information. project Information (each Project For Specialized Experience) past Performance Record Type (ppq Or Cpars) contract Number point Of Contact (name, Phone, Email, Job Title, Poc Role) ae Firm Role With Project (prime Or Subcontractor) category Ratings provide Complete Cpars (or Ppqs If Cpars Is Not Available) For All Sample Projects After The Sf330 Factor 8 Section. the Criteria Listed Above Is The Minimal Information Required For Acceptable Factor Compliance. Additional Value Will Be Considered For Each Additional Item Below And May Potentially Increase The Overall Rating For This Factor. Locate This Documentation After The Complete Cpars/ppq Documents. Additional Value Documentation Shall Not Exceed Five Pages. letters Of Appreciation Or Accolades From Previous Projects industry Recognition Or Design Awards any Other Information The Design Team Wishes To Include For This Factor So Long As The Five-page Limit Is Not Exceeded. factor 4 capacity (section H): The Evaluation Will Consider The Firm S Ability To Meet The Schedule Of The Overall Project, As Well As The Available Capacity Of Key Disciplines To Perform The Work In The Required Time. Provide The Available Capacity Of Key Disciplines By Providing Current Project Workload, Inclusive Of All Projects Awarded By The Va, Any Federal Agency, And Private Sector During The Previous Twelve (12) Months And The Full Potential Value Of Projects Forecasted Within The Next Twenty-four (24) Months Any Current Indefinite Delivery Contracts That The Firm Has. Include The Full Potential Value Of Any Current Indefinite Delivery Contracts. Offeror Shall Clearly State Their Available Capacity Presenting Workload Percentages For The Key Disciplines And/or Team Members, Including Sub-consultants. Also, The Offeror Must Provide The Completion Percentages And Expected Completion Date For All The Va Projects Current And Forecasted. Awarded In The Previous 12 Months. Please Ensure The Capacity Applies Toward The Team/personnel Provided In The Sf330. The Information For This Factor Shall Be Provided In Section H Of The Sf330. page Limit Provide No More Than Two Pages Total For This Factor. Information Provided On Additional Pages Beyond The One-page Limit Will Not Be Included With The Review. include A Table That Conveys Each Key Discipline, Quantity Of Current Design Project Workload, Quantity Of Current Construction Period Service Workload, Estimated Future Design Load, Estimated Future Construction Workload, Quantity Of Current Idiq Contracts, Total Idiq Contract Capacity, Total Remaining Idiq Capacity, And Percent The Key Discipline Is Available. For Example: key Discipline total # Of Current Design Project Workload # Of Current Construction Project Workload estimated # Of Future Design Project Workload estimated # Of Future Construction Project Workload quantity Of Current Idiq Contracts Involved With total Idiq Capacity All Contracts (millions) total Idiq Remaining Capacity (millions) percent Available capacity architect 6 7 6 7 4 $1m $2m 45% mechanical Engineer 4 8 3 8 2 $1m $1 10% add Disciplines As Required the Criteria Listed Above Is The Minimal Information Required For Acceptable Factor Compliance. Additional Value Will Be Considered For Each Additional Item Below And May Potentially Increase The Overall Rating For This Factor. Do Not Include Additional Pages In The Additional Information Section. providing A Narrative Conveying The Design Team S Approach On How New Work Will Merge With The Current Workload. provide A Narrative Describing The Process Regarding Replacement Of Key Disciplines Should One Decide To Leave The Design Team. convey How The Design Team Can Maintain Schedule If A Key Discipline Member Is No Longer Available? any Other Information The Design Team Wishes To Include For This Factor So Long As The Page Limit Is Not Exceeded. factor 5 knowledge Of Locality (section H). Knowledge Of The Locality, To Include Specific Knowledge Of Certain Local Conditions Or Project Site Features, Such As Geological Features, Climatic Conditions, Working With And Local Construction Methods Or Local Laws And Regulations. The Information For This Factor Shall Be Provided In Section H Of The Sf 330. note That The Intent Of This Factor Is To Showcase A Firm S Understanding Of The Site And Locality, And Not Where The Firm Is Located, How Far Away The Firm/branch Office Is From The Site, And How They Would Travel To The Site. page Limit Page Limit Provide No More Than One Page Total For This Factor. Information Provided On Additional Pages Beyond The One-page Limit Will Not Be Included With The Review. provide An Individual Narrative Conveying Knowledge Of The Locality For Each Of The Following Categories: local Conditions Or Project Site Features climatic Conditions geologic Features working With And Local Construction Methods working With Local Laws And Regulations the Criteria Listed Above Is The Minimal Information Required For Acceptable Factor Compliance. Additional Value Will Be Considered For Each Additional Item Below And May Potentially Increase The Overall Rating For This Factor So Long As The Page Limit Is Not Exceeded. Do Not Include Additional Pages In The Additional Information Section. experience With Seismic Designs Applicable To The Columbia, Sc Area. any Other Information The Design Team Wishes To Include For This Factor So Long As The Page Limit Is Not Exceeded. factor 6 use Of Service- Disabled Veteran-owned Small Businesses, Veteran-owned Small Businesses, And Other Types Of Small Businesses As Subcontractors. Offerors Shall Be Evaluated Based On Their Utilization Plans For Service- Disabled Veteran- Owned Small Businesses (sdvosbs), Veteran-owned Small Businesses (vosbs), Or Other Types Of Small Businesses. Offerors Shall Submit Qualifications For Proposed Consultants Per Other Criteria In This Solicitation. page Limit Page Limit Provide No More Than One Page Total For This Factor. Information Provided On Additional Pages Beyond The One-page Limit Will Not Be Included With The Review. provide A Listing Of All Consulting Firms And Business Government Certification(s). Indicate The Anticipated Percentage Of Work The Consulting Firm Will Perform. the Criteria Listed Above Is The Minimal Information Required For Acceptable Factor Compliance. The Higher Percentage Of Certified Sdvosb Firms Included With The Design Team May Provide Additional Value And Potentially Increase The Overall Rating For This Factor So Long As The Page Limit Is Not Exceeded. Do Not Include Additional Pages In The Additional Information Section.

Details: The property at Brandenburgische Strasse 100 in Ludwigsfelde has 2 building sections. The building is used as a 2-stream vocational school with preparation and classrooms, administration and office rooms, a serving kitchen with dining room, and storage rooms. The main building, which faces the street on its gable side, and the side wing angled at right angles to it, were built around 1950. The main building has a full basement and 2 floors above ground and an attic. The side wing has a partial basement and 1 floor above ground and an attic. The building sections were built as a masonry structure with steel stone and reinforced concrete ceilings, a wooden roof structure with concrete roof tiles. The roof structure consists of nailed lattice rafter trusses on the eaves sill and ridge purlin. The hipped areas were built as a purlin roof structure with rafters. The interior and sanitary facilities were renovated in the early 1990s. In this context, the roof covering (clay tiles) was also renewed. The current planning includes the renovation and the fire protection upgrade of the buildings. The roof structure and roof covering are being renewed outside. The windows and facade are being revised. Inside, fire protection renovations are being carried out with regard to the hallway partitions and necessary room closures. The main building is approx. 75.00 x 13.50 m and the side wing approx. 35.00 x 12.50 m