Interior Tenders

Purchaser Name: Ministry Of Interior General Office | Providing and supplying an office with all its accessories + an office sofa set

Details: Introduction (previously Posted Under Sources Sought Notices 36c24125r0008 And 36c24125r0051) network Contracting Office 1 (nco 1), Supporting Va New England Healthcare System (visn 1) And The Va Boston Healthcare System (hcs) Is Seeking Potential Sources For An Upcoming Requirement As Described In The Attached Statement Of Work For The Project; Upgrade Visn 1 Laundry Building 45. This Notice Is Not A Request For Proposals. This Notice Is A Market Research Tool And Has Not Been Set-aside For Any Small Business Category, However The Notice Is Issued To Determine Appropriate Set-aside Categories. Responses To This Notice, In Conjunction With Other Government Market Research Resources, Will Be Used By The Contracting Officer To Determine The Applicable Socio-economic Set-aside For The Procurement. nco 1 Looks Forward To Interest Of Well-qualified New Entrants To Contracting With The Veterans Health Administration Including The Interest Of Sb And Wosb Contractors And Especially Responses From Verified Sdvosb/vosb Firms. This Notice Is Published To Conduct Market Research To Determine If There Is A Sufficient Number Of Verified Sdvosb S, Vosb S, Wosb S And Sb S Capable Of Performing The Requirements. All Information Must Be Submitted In Sufficient Detail For A Decision To Be Made On The Appropriate Set-aside. Failure To Submit All Information Requested Will Result In A Contractor Not Being Considered As An Interested Sdvosb, Vosb Or Sb Concern. If Adequate Interest Is Not Received This Action Will Not Be A Set-aside. once The Appropriate Set-aside Is Determined, A Separate Public Announcement Requesting Bids Or Proposals Will Be Publicized On Sam.gov Contract Opportunities In Accordance With 40 U.s. Code § 1101 And Far 36.601. The Solicitation Is Estimated To Be Released In March 2025. general Project Description, Magnitude, And Naics the Va Boston Hcs In Brockton, Ma, Requires A Contractor To Provide All Labor, Equipment, Materials And Supervision For The Renovation And Improvements Of The Visn 1 Laundry, Building 45 For Veterans Affairs Medical Center, Brockton, Massachusetts In Accordance With Contract Documents. the Renovation Includes Selective Demolition Of All Existing Mechanical, Electrical And Plumbing (mep) Systems, Selective Demolition Of Existing Finishes, Doors, Structural Slab, And Other Existing Items. The Renovation Also Includes The Construction Of Structural Improvements, Doors, Electrical Systems, Hvac Systems, Plumbing Systems, Start-up Of Previously Installed Elevator By Renovating Associated Electrical And Mechanical Components, And Interior And Exterior Finishes. In Addition To The Renovation, The Improvements To Building 45 Include Ensuring Exterior Envelop Around Doors, Windows, And Stair Towers Along With Any Penetrations Are Sealed Properly. Moreover, Renovation Includes Construction Of A Service Platform And Stairs For Dedicated Emergency Generator System. The Focus Of The Project Is To Provide Structural Slab Repairs And Replacement To Sustain Required Laundry Equipment Loads And Vibrations. this Project Also Requires Specialized Personnel, With Specified Experience, To Assist In The Cqc System Manager For The Following Areas, As Applicable: Electrical, Mechanical, Civil, Structural, Environmental, Architectural, Materials Technician Submittals Clerk, Commissioning Agent/leed Specialist, And Low Voltage Systems. These Individuals Or Specified Technical Companies Are Directly Employed By The General Contractor And Cannot Be Employed By A Supplier Or Subcontractor On This Project; Be Responsible To The Cqc System Manager; Be Physically Present At The Construction Site During Work On The Specialized Personnel S Areas Of Responsibility; Have The Necessary Education Or Experience In Accordance With The Experience Matrix Listed Herein. These Individuals Can Perform Other Duties But Need To Be Allowed Sufficient Time To Perform The Specialized Personnel S Assigned Quality Controls Duties As Described In The Cqc Plan. A Single Person Can Cover More Than One Area Provided That The Single Person Is Qualified To Perform Qc Activities In Each Designated And That Workload Allows. experience Matrix area qualifications civil graduate Civil Engineer Or Construction Manager With 2 Years Experience In The Type Of Work Being Performed On This Project Or Technician With 5 Years Related Experience. mechanical graduate Mechanical Engineer With 2 Years Experience Or Construction Professional With 5 Years Of Experience Supervising Mechanical Features Of Work In The Field With A Construction Company. electrical graduate Electrical Engineer With 2 Years Related Experience Or Construction Professional With 5 Years Of Experience Supervising Electrical Features Of Work In The Field With A Construction Company. structural graduate Civil Engineer (with Structural Track Or Focus), Structural Engineer, Or Construction Manager With 2 Years Experience Or Construction Professional With 5 Years Experience Supervising Structural Features Of Work In The Field With A Construction Company. architectural graduate Architect With 2 Years Experience Or Construction Professional With 5 Years Of Related Experience. environmental graduate Environmental Engineer With 3 Years Experience. submittals submittal Clerk With 1 Year Experience. concrete, Pavement, And Soils materials Technician With 2 Years Experience For The Appropriate Area. testing, Adjusting, And Balancing (tab) specialist Must Be A Member Of Aabc Or An Experienced Technician Of The Firm Certified By The Nebb. design Quality Control Manager registered Architect Or Professional Engineer the Estimated Magnitude Of This Construction Project Is Between $5,000,000.00 And $10,000,000.00. This Information Is Provided Per Vaar 836.204. The Naics Code Is 236220 And The Small Business Size Standard Is $45 Million. information Sought a) Sam Unique Entity Id (uei) b) Bonding Capability; Per Contract And Aggregate. Provide Amount Of Aggregate Bonding Currently Available (i.e., Amount Not Committed). c) Experience. Submission Of A Maximum Of Three (3) Recent And Relevant Examples Of Completed Or Substantially Completed (eighty Percent (80%)) Projects Between $5,000,000.00 And $10,000,000.00, Of Similar Scope To The Upgrade Visn 1 Laundry Building 45 Project. relevant Experience Shall Include Repair And Strengthening Of Existing Heavy Load-bearing Reinforced Concrete Structural Elements (such As Beams, Columns, Slabs, And Foundations) And Structural Framing In Already Completed Building, Cast In Place Concrete (to Include Footing, Pier And Foundation Installation), Reinforced Cmu Wall Installation, Concrete Beam Enlargement, Epoxy Injection Crack Repair, Slab Repair, Underside Slab Repair, And All Other Work Similar In Scope. recent Is Defined As Completed Within The Last Five (5) Years. submission Instructions interested Firms Shall Hold An Active Sam Registration. Visit Https://sam.gov/ To Register In This Database. Sdvosb Or Vosb Firms Shall Be Certified By The Veterans Small Business Certification (vetcert) At Https://veterans.certify.sba.gov/. all Information Must Be Submitted In Sufficient Detail For A Decision To Be Made. Failure To Submit All Information Requested May Result In A Contractor Not Being Considered As An Interested Concern. If Adequate Interest Is Not Received By 4:00 Pm Est On January 31, 2025, This Action May Not Be Set-aside For Sdvosbs, Vosbs, Wosbs, Or Small Business Firms. Interested Firms Must Reply Via E-mail To Alexis.duda@va.gov, Kyle.kiepke@va.gov, And Heather.libiszewski-gallien@va.gov With The Subject Attention: 36c24125q0207 - Upgrade Visn 1 Laundry Building 45 . disclaimer this Sources Sought Is Issued Solely For Information And Planning Purposes Only And Does Not Constitute A Solicitation. All Information Received In Response To This Request That Is Marked As Proprietary Will Be Handled Accordingly. In Accordance With Far 15.201(e), Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract. Responders Are Solely Responsible For All Expenses Associated With Responding To This Notice.

Details: Description Republic Of The Philippines Batangas State University Batangas City Request For Quotation "improvement Of Red Spartan Digital Printing Hub Location" 1. The Batangas State University (batstate U) Through The Bids And Awards Committee Invites Interested Firms/supplier To Submit Quotation For The Project "improvement Of Red Spartan Digital Printing Hub Location" With An Approved Budget For The Contract (abc) Two Hundred Thirty-three Thousand Two Hundred Seventy Pesos And Fifty-nine Centavos Only (php 233,270.59). Quotation Received In Excess Of The Abc Shall Be Automatically Rejected At The Opening. Item No. Qty Description Total 1 711 Piece 1" Fiber Cement Board Screw 497.70 2 250 Piece 1" Gypsum Screw 157.50 3 2 Piece 1-gang Switch, 10a, 240v W/ Plate & Cover 308.00 4 7 Piece 12mm Thk. X 4' X 8' Gypsum Board 5,731.25 5 10 Piece 2" Paint Brush 826.00 6 2 Piece 2" X 250' Mesh Tape 375.00 7 6 Piece 2" X 250' Mesh Tape 750.00 8 1 Piece 2-gang Switch, 10a, 240v W/ Plate & Cover 266.00 9 7 Set 2x20w, 2000 Lumens, Led Batten Light, Surface Mounted 18,326.00 10 9 Piece 3/4" Thick X 4'x8'x (24kg) Marine Type Plywood 20,790.00 11 30 Piece 35mm X 76mm X 0.50mm X 3m Metal Studs 5,625.00 12 20 Piece 35mm X 76mm X 0.50mm X 3m Metal Track 3,750.00 13 2 Piece 4 Pin Industrial Socket 3p 2,520.00 14 10 Piece 4" Roller Brush With Handle 630.00 15 20 Piece 4.5mm Thk. X 4' X 8' Fiber Cement Board 15,850.00 16 4 Piece 4in X 4in X 3mm Ball Bearing Hinges 1,750.00 17 1 Piece 60at 3p Cb (tapping Point) 7,140.00 18 1 Lot Assorted Fittings For Mdp Assembly 2,800.00 19 4 Piece C-channel 1mm X 12mm X 38mm X 5m 1,042.96 20 1 Bag Cement 295.00 21 3 Kilogram Common Wire Nail Asstd 378.00 22 45 Meter Copper Wire 14.0mm² Thhn/thwn 6,306.30 23 195 Meter Copper Wire 3.5mm² Thhn/thwn 7,495.80 24 29 Meter Copper Wire 5.5mm² Thhn/thwn 1,705.78 25 29 Meter Copper Wire 8.0mm² Thwn/thhn 2,668.58 26 8 Piece Duplex Receptacle, Universal Type With Grounding Slot, 16a, 240v, (wall-mounted, Ceiling Mounted) 1,456.00 27 1 Piece Door 0.80m X 2.10m Mdf Interior Door With Jamb 4,584.75 28 1 Piece Door 0.80m X 2.10m X 1/2" Thk. Clear Tempered Glass In Top And Bottom Frame With Stainless Door Handle And Complete Accessories And Frosted Sticker 13,557.60 29 1 Piece Door Lock Set Door Lock Set - Cylindrical 475.00 30 10 Piece Double Furring 0.50mm X 19mm X 5m 2,187.50 31 15 Piece Emt Pipe, 32mmø (1"ø), Thick Wall 17,715.60 32 5 Roll Electrical Plastic Tape, Big (flame Retardant) 350.00 33 65 Piece Emt Pipe, 15mmø (½"ø), Thick Wall 22,759.10 34 11 Piece Emt Pipe, 25mmø (½"ø), Thick Wall 8,105.57 35 3 Liter Flat Enamel 918.75 36 4 Liter Flat Latex 1,035.00 37 1 Gallon Glazing Putty 923.75 38 2 Gallon Gypsum Putty (4 Ltrs.) 850.00 39 4 Gallon Latex Top Coat 3,150.00 40 5 Liter Latex Top Coat 1,375.00 41 1 Assembly Mdp Panelboard: (mdp) 230v, Main: 1-60at/100af 3p, Branches; 1-40at/100af 2p, 6-20at/100af 2p, 2-20at/100af 3p, 2-spare 20at/100af 2p Cb 28,583.10 42 1 Lot Other Supports & Fittings/hardware Needed Not Mentioned Above 1,400.00 43 3 Gallon Primer For Concrete 2,512.50 44 3 Liter Primer For Wood 817.50 45 6 Liter Putty 1,387.50 46 4 Liter Quick Drying Enamel 1,035.00 47 5 Kilogram Rags/newspaper 218.75 48 1 Cubic Meter Sand S1 1,700.00 49 60 Piece Sand Paper For Wood And Drywalls 1,125.00 50 11 Piece Suspension Clip With Rod Joiner 1,691.25 51 3 Liter Thinner 600.00 52 22 Piece W-clip (double) 137.50 53 10 Piece Wall Angle 50mm X 25mm X 3m 625.00 54 4 Gallon Wood Glue 2,400.00 55 3 Liter Wood Prime 825.00 56 7 Set Μpvc Junction Box With Cover, 4" Orange Octagonal 274.40 57 13 Set Μpvc Utility Box, 2"x4" Orange 509.60 Note: Kindly Indicate The Brand On Your Quotation. 2. Philgeps Registration Certificate And Other Business Permits Shall Be Attached Upon Submission Of The Quotation. 3. The Quotation Must Be Submitted (can Also Be Send Thru Fax And Email At The Contact Details Listed Below) Or To The Rizal Avenue Extension, Batangas City And Shall Be Received By The Committee On Or Before 5:00 Pm Of January 22, 2025. E-mail : Procurement.central.external@g.batstate-u.edu.ph 4. The Bsu Reserves The Right To Reject Any Or All Quotations And/or Proposals And Waive Any Formalities/informalities Therein And To Accept Such Bids It May Consider As Most Advantageous To The Agency And To The Government. Batstate U Neither Assumes Any Obligation For Whatsoever Losses That May Be Incurred In The Preparation Of Bids, Nor Does It Guarantee That An Award Will Be Made. Mr. Jonas Erik L Ebora Assistant Director, Procurement Rizal Avenue Extension, Batangas City 980-0385 Loc. 1230

Details: Notice Of Proposed Procurement File Number: W8486-259794/b Tier: 1 (< $3.75m) This Bid Solicitation Cancels And Supersedes Pervious Bid Solicitation Number W8486-259794/a Dated 12 November 2024 With A Closing Date Of 04 December 2024 At 2:00pm Est. A Debriefing Or Feed Session Was Provided By Email To The Bidders/offerors/supplier Who Did Not Bid On The Previous Solicitation. This Requirement Is For The Department Of National Defence (dnd) For The Services Of One (1) Senior Life Cycle Management Specialist Under Stream 5, Technical Engineering And Maintenance Service. The Intent Of This Solicitation Is To Establish One (1) Contract For Two (2) Initial Years, With The Option To Extend The Term Of The Contract By Up To Three (3) One-year Irrevocable Option Periods Under The Same Conditions. This Solicitation Is Only Open To The Below List Of Pre-qualified Suppliers Under The Task And Solutions Professional Services (tsps) (sa) Number E60zt-18tsps. Time Frame Of Delivery: Asap Documents May Be Submitted In Either Official Language Of Canada. Rfp Documents Will Be E-mailed Directly From The Contracting Authority To The Qualified Supply Arrangement Holders Who Are Being Invited To Bid On This Requirement. Bidders Are Advised That The Rfp Documents Are Not Available On The Canadabuys Tender Management Application (https://canadabuys.canada.ca). The Tsps Method Of Supply Is A Result Of A Formal Competitive Process Which Was Established As A Result Of Extensive Consultations With Industry. The Method Of Supply Provides Suppliers With An On-going Opportunity To Become Prequalified For Participation In Future Bidding Opportunities. To Obtain More Information About How To Become A Pre-qualified Supplier For Tsps Please Contact Public Works And Government Services Canada (pwgsc). For General Information On The Various Pwgsc Methods Of Supply, Or To Obtain Specific Information On A Pwgsc Professional Service Method Of Supply, Please Visit Pwgsc's Canadabuys Tender Management Application Website At: Https://canadabuys.canada.ca/en/about-us/news-and-events/transition-canadabuys-tender-management-application#msg List Of Pre-qualified Suppliers : This Requirement Is Open The Following Suppliers Who Qualified Under The Stated Consultant Stream, Security Level, Region And Tier: 7351933 Canada Inc 9468269 Canada Corp. Acf Associates Inc. Adga Group Consultants Inc. Adirondack Information Management Inc., The Aim Group Inc. In Joint Venture Akkodis Canada Inc. Altis Recruitment & Technology Inc. Amyantek Inc Appian Corporation Cae Inc. Calian Ltd. Deloitte Inc. Fleetway Inc. Ipss Inc. Maverin Business Services Inc. Maxsys Staffing & Consulting Inc. Monz Consulting Inc., Newfound Recruiting Corporation. In Joint Venture Newfound Recruiting Corporation Norda Stelo Inc. Olav Consulting Corp., Moshwa Aboriginal Information Technology Corporation, In Joint Venture Procom Consultants Group Ltd. Prologic Systems Ltd. Promaxis Systems Inc Protak Consulting Group Inc., Soubliere Interiors Ltd., 2672486 Ontario Inc. In Joint Venture Reticle Ventures Canada Incorporated Softsim Technologies Inc.. T.e.s. Contract Services Inc. T.i.7 Inc., The Source Staffing Solutions Inc., In Joint Venture Talencity Inc. Technomics, Incorporated The Aim Group Inc. Thomas&schmidt Inc. Tiree Facility Solutions Inc. V42 Management Consulting, Inc. Valcom Consulting Group Inc. Additional Information For Bidders For Services Requirements, Bidders Must Provide The Required Information As Detailed In Article 2.3 Of Part 2 Of The Bid Solicitation, In Order To Comply With Treasury Board Policies And Directives On Contracts Awarded To Former Public Servants. Security Requirement: There Are Security Requirements Associated With This Requirement: Supplier Security Clearance Required: Secret Security Level Required (document Safeguarding): None Foci Review: None For Additional Information, Consult Part 6 – Security And Other Requirements, And Part 7 – Resulting Contract Clauses. For More Information On Personnel And Organization Security Screening Or Security Clauses, Bidders Should Refer To The Industrial Security Program (isp) Of Public Works And Government Services Canada (http://ssi-iss.tpsgc-pwgsc.gc.ca/index-eng.html) Website. Location Of Work : Region: Cfb Esquimalt Specific Location: Cfb Esquimalt Bidders’ Inquiries Inquiries Regarding This Request For Proposal Requirement Must Be Submitted To The Contracting Authority: Name: Jennifer Ouellet Email: Jennifer.ouellet2@forces.gc.ca The Crown Retains The Rights To Negotiate With Suppliers On Any Procurement.

Details: 1.0 Description. The Marine Corps Systems Command (mcsc) Product Manager, Supply And Maintenance Support Systems (mss) Program Office Is Seeking Potential Sources To Provide Corrosion Repair Services Through A Firm Fixed Price Contract For Equipment Located At Okinawa, Japan. This Contract Would Provide Corrosion Repair Services For Marine Corps, Army, Navy, Navy Aviation Ground Support And Ground Support Equipment. The Purpose Of This Rfi Is To Identify Sources Capable Of Providing These Services As Described In The Following Paragraphs. 2.0 Minimum Requirements. The Contractor Shall Provide All Labor, Training, Management, Supervision, Tools, Equipment, Materials, And Supplies (except Those Items Specifically Noted As Government-furnished, Enclosure (1)) Necessary To Perform Corrosion Repair And Restoration Of Government Owned Vehicles, Equipment, And Components. Corrosion Repair Services Include, But Are Not Limited To: inspection disassembly cleaning body Repair surface Preparation coating Application registration Marking reassembly 3.0 Production Requirements. All Production Will Be Performed At The Government’s Site Corrosion Repair Facility (crf), Building 616, Camp Kinser, Okinawa, Japan. 3.1 The Contractor Shall Be Capable Of Repairing And Restoring A Monthly Production Objective Of ~70 Principal End Items (pei) With A Minimum Production Requirement Of Between 55-63 Peis Consisting Of Various Sizes And Corrosion Category Code (ccc) Condition. 3.2 Production Breakdown By Organization. Multiple Government Organizations Will Participate In This Contract; Production Shall Be Completed And Invoiced As Follows: - U.s. Marine Corps Equipment. ~50 Pei Per Month / 600 Per Year. - U.s. Army Pacific (usarpac) Equipment. ~6 Pei Per Month / 72 Per Year. - U.s. Navy Naval Construction Regiment (ncr) 30. ~4 Per Month / 48 Per Year. - U.s. Navy Aviation Intermediate Maintenance Detachment (aimd). ~ 2 Per Month / 24 Per Year - Other Military Services Operating Similar Equipment Outlined As Identified Above. 3.3 Repair Cycle Time (rct). Rct On The Day The Government Makes A Pei Available To The Contractor For Work. The Contractor Shall Be Capable Of Completing All Required Tasks In Thirty Days Or Less From The Equipment Induction Date. 4.0 Quality Assurance. The Contractor Shall Perform Quality Control Continuously Throughout The Corrosion Repair Process, And Develop And Maintain A Quality Control Program To Ensure Services Are Performed In Accordance With The Government’s Requirements And Accepted Practices. The Government Will Complete Quality Assurance (qa) Inspections After Each Stage Of Repair. 5.0 Technical References. All Service Of Equipment Shall Comply With The Following Technical References For The Respective Service’s Equipment: 5.1 U.s. Marine Corps Technical Manual (tm) 4750-15/1_, Painting, Coating, Underbody And Registration Marking For Marine Corps Combat And Tactical Equipment And Tm 4795-12/1, Operator And Organizational Maintenance Manual Corrosion Prevention And Control Procedures For Usmc Ground Combat Equipment. 5.2 U.s. Army Technical Publications. Tm 43-0139, Chemical Agent Resistant Coating (carc) Application And Quality Assurance On Army Ground Equipment And Tm 43-0242, Chemical Agent Resistant Coating Spot Painting For Army Ground Equipment. 5.3 U.s. Navy Technical Publications For Ground Equipment. 5.4 U.s. Navy Technical Publications. Navair 17-1-125, Maintenance Instructions Organizational And Intermediate Level, Support Equipment Cleaning Preservation And Corrosion Control. 5.5 Original Equipment Manufacturer (oem) Specifications, And Or Other Technical Guidance Provided By The Government. 6.0 Responses 6.1. Interested Parties Are Requested To Respond To This Rfi With A White Paper. 6.2. White Papers In Microsoft Word Or Office Compatible Format Are Due No Later Than 10 January 2025, 11:00 A.m. Est. Responses Are Limited To 5 Pages And Shall Be Submitted Via Email Only To The Contract Specialist, Kimberly.a.stone@usmc.mil And Deshawn.gaines@usmc.mil. Proprietary Information, If Any, Should Be Minimized And Must Be Clearly Marked. To Aid The Government, Please Segregate Proprietary Information. Please Be Advised That All Submissions Become Government Property And Will Not Be Returned. Only Government Employees Will Review The Responses. 6.3. Section 1 Of The White Paper Is Not Included In The Page Limitation And Shall Provide The following Administrative Information At A Minimum: 6.3.1. Name, Mailing Address, Overnight Delivery Address (if Different From Mailing Address), Phone Number, And Email Of Designated Point Of Contact, And Sam.gov Unique Entity Identification Number. 6.3.2. The Offeror’s Business Type (large Business, Small Business, Small, Disadvantaged Business, 8(a)-certified Small, Disadvantaged Business, Hubzone Small Business, Woman-owned Small business, Very Small Business, Veteran-owned Small Business, Service-disabled Veteran-owned small Business), Based Upon The North American Industry Classification System (naics) Code. please Refer To Federal Acquisition Regulation (far) Part 19 For Additional Detailed Information On Small Business Size Standards. The Far Is Available At Https://www.acquisition.gov/. 6.4 Naics Code For This Effort Is 811121, Automotive Body, Paint, And Interior Repair And Maintenance. 6.5 Product Service Code (psc) For This Effort Is J023, Maint/repair/rebuild Of Equipment-ground Effect Vehicles, Motor Vehicles, Trailers, And Cycles. 6.6 Section 2 Of The White Paper Shall Answer, At A Minimum, The Offeror’s Ability To Provide The Services Identified Within Paragraphs 2-4 Of This Rfi. 7.0 Industry Discussions. Mcsc Representatives May Or May Not Choose To Meet With Potential Offerors. Such Discussions Would Only Be Intended To Get Further Clarification Of Potential Capability To Meet The Requirements, Especially Any Development And Certification Risks. 8.0 Questions Regarding This Announcement Shall Be Submitted In Writing Via Email To The Contract Specialist, Kimberly.a.stone@usmc.mil And Deshawn.gaines@usmc.mil No Later Than 2:00 Pm Est, 13 December 2024. Verbal Questions Will Not Be Accepted. Questions Shall Not Contain Proprietary Or Classified Information. The Government Does Not Guarantee That Questions Received After 13 December 2024 Will Be Answered. 9.0 Summary. This Is A Request For Information (rfi) Only To Identify Sources That Offer Hardware Services Meeting The Requirements Listed In The Paragraphs Above.1.0. This Rfi Is Issued Solely For Information And Planning Purposes – It Does Not Constitute A Request For Proposal (rfp) Or A Promise To Issue An Rfp In The Future. The Information Provided In The Rfi Is Subject To Change And Is Not Binding On The Government. The Marine Corps Has Not Made A Commitment To Procure Any Of The Items And Or Services Discussed, And Release Of This Rfi Should Not Be Construed As Such A Commitment Or As Authorization To Incur Cost For Which Reimbursement Would Be Required Or Sought. Further, The Marine Corps Is Not At This Time Seeking Proposals And Will Not Accept Unsolicited Proposals. All Submissions Become Government Property And Will Not Be Returned. responders Are Advised That The U.s. Government Will Not Pay For Any Information Or Administrative Costs Incurred In Response To This Rfi; All Costs Associated With Responding To This Rfi Will Be Solely At The Interested Party’s Expense. Not Responding To This Rfi Does Not Preclude Participation In Any Future Rfp, If Any Is Issued. If A Solicitation Is Released, It Will Be Released On Sam.gov The Gsa Website. It Is The Responsibility Of The Potential Offerors To Monitor This Site For Additional Information Pertaining To This Requirement.

Details: The U.s. Department Of Interior, U.s. Geological Survey (usgs) Is Issuing A Sources Sought Synopsis As A Means Of Conducting Market Research To Identify Parties Having An Interest In And The Resources To Support The Requirement For The Reconditioning Of An Existing Multizone Unit (identified As Fan System-6 Or Fs-6), Including Removal Of Components Of The Existing Air Handling Unit (as Needed), Restoring The Existing Air Handling Unit (repairing Housing, Replacing Existing Heating/cooling Coils And Humidification Distribution Tubes, Replacing Fan Section And Motor), Reinstallation Of Existing Controls, And Commissioning, Testing, And Balancing The Refurbished Air Handling Unit. The Fan System-6 Is Located Within The U.s. Geological Survey (usgs), National Wildlife Health Center (nwhc), 6006 Schroeder Road, Madison, Wi. This Proposal Reflects Coverage For The Fy 2025. The Coverage Includes: ¿ Reconditioning The Existing Failing Multizone System Located In The Mb. The Unit, Designated Fs-6, Is A 100% Outside Air 1979 Trane Air Handling Unit With The Following Manufacturer Information: Model Number: Ccba21seea0 Serial Number: K80c01649 Basic Unit: Cmr1ar4dar000h Coils: 0ca1e3a1c Accessory 22000000000l1a1¿ Contractor Shall Provide A Nebb Certified Balancing Technician To Perform All Testing And Adjustment Of Air And Water Systems For This Project.¿ The Existing Facility Bms Is A Jci Metasys System (version 10). Contractor Shall Provide Technicians Factory Trained And Certified In The Installation And Programming Of Jci Metasys Bms Systems.¿ system Shall Be Reconditioned Complete, With All Piping, Ductwork, Insulation, Wiring, System Configuration, And Programming Completed In A Neat And Workmanlike Manner. All Demolition, Reconditioning, And Installation Work Shall Be Performed Per Manufacturer¿s Recommendations, Applicable Building Codes, And Relevant Trade Guidelines. Contractor Shall Utilize Technicians Trained In The Applicable For The Relevant Work Involved In This Pws.¿ all Demolished Materials Not Reused Or Recycled Shall Be Disposed Of According To Federal, State, And Local Codes.¿ any Hazardous Materials Requiring To Be Removed As Part Of This Pws Shall Be Removed, According To Noted Guidelines, And Disposed Of In A Federal, State, And Locally Approved Hazardous Waste Landfill. No Exception Shall Be Allowed. A Disposal Record Or Receipt Shall Be Provided, At Closeout, As A Deliverable. Failure To Comply With This Removal Standard, Shall Result In Possible Federal Charges And Fees, Of Which The Gc Will Be Responsible. No Such Costs Or Violation Charges Shall Transfer To The Federal Government.¿ contract Period: Estimated Start Date March 2025 (saf). This Is Not A Solicitation For Proposals, Proposals Abstract, Or Quotation. This Is A Sources Sought Notice To Determine What Size Companies Can Perform This Requirement. The Purpose Of This Notice Is To Obtain Information Regarding:(1) the Availability And Capability Of Qualified Small Business Sources;(2) whether They Are Small Businesses; Hubzone Small Businesses; Service-disabled, Veteran-owned Small Businesses; 8(a) Small Businesses; Veteran-owned Small Businesses; Woman-owned Small Businesses; Or Small Disadvantaged Businesses; And(3) their Size Classification To The North America Industry Classification System (naics) Code 236220 ¿ Commercial Building Construction General Contractors. A Firm Is Considered Small Under Naics Code 236220 If Their Average Annual Receipts For The Preceding Three (3) Years Were Less Than Or Equal To 750 Employees. Any Information Submitted Is Voluntary. If Sufficient Interest And Capability Is Not Received From Firms In Category (2) Above, Any Solicitation May Be Issued As Unrestricted Without Further Consideration. Your Responses To The Information Requested Will Assist The Government In Determining The Appropriate Acquisition Method, Including Whether A Set-aside Is Possible.a. submission Of Capability Statement And Delivery Instructions:in 5 Pages Or Less, Respondents Shall Submit A Capability Statement Of The Organization Which Demonstrates Their Ability To Supply The Above Requirements. Capability Statements Must Not Include Links To Internet Web Site Addresses (urls) Or Otherwise Direct Readers To Alternate Sources Of Information. Responses Must Reference The Sources Sought Number And Include The Following:1. name And Address Of The Company, Sam.gov Ueid Number,2. size And Type Of Business, Pursuant To The Applicable Naics Code.3. point Of Contact With Name, Title Address, Phone, And Email,4. capability To Provide The Specifics Of This Requirement, With Appropriate Documentation Supporting Claims Of Organizational And Staff Capability To Demonstrate Staff Expertise Including Their Experience; Current In-house Capability And Capacity To Perform The Work; Prior Completed Projects Of Similar Nature, Including Government Contracts And Indicating Corporate Experience And Management Capability;5. example Of Prior Completed Government Contract, References, The Dollar Value Of The Work, And Other Related Information;6. list Of Organizations To Whom Similar Types Of Services Have Been Previously Provided And The Dollar Value Of That Work.7. if Applicable, Provide A Current Gsa Schedules And/or Government-wide Acquisition Contracts (gwacs) Appropriate To This Sources Sought.8. type Of Company (i.e., Small Business, 8(a), Woman Owned, Veteran Owned, Etc.) As Validated Via The System For Award Management (sam). This Indication Shall Be Clearly Marked On The First Page Of Your Capability Statement.the Government Will Evaluate Market Information To Ascertain Potential Market Capacity To 1) Provide Services Consistent In Scope And Scale With Those Described In This Notice And Otherwise Anticipated; 2) Secure And Apply The Full Range Of Corporate Financial, Human Capital, And Technical Resources Required To Successfully Perform Similar Requirements; 3) Implement A Successful Project Management Plan That Includes: Compliance With Tight Program Schedules; Cost Containment; Meeting And Tracking Performance; Hiring And Retention Of Key Personnel And Risk Mitigation; And 4) Provide Services Under A Performance Based Service Acquisition Contract. Based On The Responses To This Sources Sought Notice/market Research, This Requirement May Be Set-aside For Small Businesses Or Procured Through Full And Open Competition, And Multiple Awards May Be Made. Telephone Inquiries Will Not Be Accepted Or Acknowledged, And No Feedback Or Evaluations Will Be Provided To Companies Regarding Their Submissions.submission Instructions: Interested Parties Who Consider Themselves Qualified To Perform The Above-listed Services Are Invited To Submit A Response To This Sources Sought Notice By 15:00 Pm Mdt, On 30 January, 2025. All Responses Under This Sources Sought Notice Must Be Emailed To Philip Robinson At Probinson@usgs.gov.b. disclaimer And Important Notesthis Notice Does Not Obligate The Government To Award A Contract Or Otherwise Pay For The Information Provided In Response. The Government Reserves The Right To Use Information Provided By Respondents For Any Purpose Deemed Necessary And Legally Appropriate. Any Organization Responding To This Notice Shall Ensure That Its Response Is Complete And Sufficient Detailed To Allow The Government To Determine The Organization¿s Qualification To Perform The Work. Respondents Are Advised That The Government Is Under No Obligation To Acknowledge Receipt Of The Information Received Or Provide Feedback To Respondents With Respect To Any Information Submitted. After A Review Of The Response Received, A Pre-solicitation Synopsisand Solicitation May Be Published In Beta.sam.gov. However, Response To This Notice Will Not Be Considered Adequate Responses To A Solicitation.failure To Respond Or Submit Sufficiently Detailed Information May Result In A Company Not Being Considered A Likely Offeror When Making A Decision On Whether Or How To Set Aside A Solicitation For Restricted Competition. Regardless Of The Information Submitted, The Government Reserves The Right To Consider Any Arrangement As Determined Appropriate For This Requirement.c. confidentialityno Proprietary, Classified, Confidential, Or Sensitive Information Shall Be Included In Your Response. The Government Reserves The Right To Use Any Non-proprietary Technical Information In Any Resultant Solicitation(s).this Announcement Is To Identify Small Business Firms; However A Company Of Any Size May Submit A Capability Statement For This Announcement.

Details: Description Invitation To Bid For The Procurement Of Brand-new Sports Utility Vehicle 1. The Municipal Government Of La Trinidad, Through The General Fund 2024 Intends To Apply The Sum Of Two Million Pesos (php2,000,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Procurement Of Brand-new Sports Utility Vehicle. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Municipal Government Of La Trinidad, Benguet Now Invites Bids For The Project: Project Reference No.: 2024-12-6405-mbo Name Of Project: Procurement Of Brand-new Sports Utility Vehicle Project Location: La Trinidad, Benguet Contract Duration: Within 45 Calendar Days From Receipt Of The Notice To Proceed Brief Description: Item Qty. Unit Description 1 1 Unit Brand-new Sports Utility Vehicle Specification: Length: 4,825 Mm Width: 1,815 Mm Height: 1,835mm (with Roof Rail And Antenna) Wheelbase: 2,800 Mm Tread (front/rear): 1,520/1,515mm Minimum Clearance: 218 Mm Gross Vehicle Weight: 2,775kg Curb Weight:2,040kg Seating Capacity: 7 Persons Engine: Type: 4-cylinder Turbo Charged Intercooler Engine Displacement: 2442cc Compression Ratio: 15.5 Bore X Stroke: 86x105.1mm Maximum Power: 181/3,500 Ps/rpm Maximum Torque: 430/2,500 Nm/rpm Engine Start/ Stop Button: Equipped Fuel Tank Capacity: 68l Transmission: 8-speed Automatic, With Sports Mode Paddle Shifter: Equipped 4wd System: 2wd Suspension: Front: Double Wishbone With Coil Spring And Stabilizer Bar Rear: 3-link With Coil Spring And Stabilizer Bar Brakes: Front: Ventilated Disc, Equipped With Electronic Brakeforce Distribution (ebd) Rear: Ventilated Disc Brake Assist: Equipped Brake Override System: Equipped Tires: Tires: 265/60 R18 Wheels: R18 Alloy Black Steering: Power Steering: Equipped (hydraulic) Steering Wheel: 3-spoke Leather Wrapped Steering Wheel-mounted Controls: Equipped Steering Wheel-mounted Camera Switch: Equipped Cruise Control: Equipped Multi-media System: Type: 8” Smart Phone Link Display Audio (sda) Touchscreen Usb Ports: Equipped, 2 Ports Speakers: 6 (including 2 Tweeters) Safety: Airbags: Equipped Seatbelts: 3 Pt. Elr, Double Pretensioner, Force Limiter And Adjustable Belt Anchor Camera: 360-degree Camera Active Stability And Traction Control: Equipped Hill Start Assist: Equipped Trailer Stability Assist: Equipped Parking Sensors: Rear Lock/unlock System: Keyless Operation System Interior: Seats: 8-way Power Adjustable (slide, Recline, Double-height) Instrument Cluster Display: 8” Color Lcd Air-conditioning System: Dual Zone Automatic With Nanoe X Parking Brake: Electric Type With Brake Auto-hold Function Rear View Mirror: Manual Day And Night Cargo Underfloor Storage: Equipped Exterior: Front Grille Illumination: Equipped Headlight: Project Led With Automatic Leveler Fog Lights: Led Daytime Running Lights: Halogen Side Door Mirror: Black With Integrated Turn Signal Lights Tailgate: Power Lift With Hands-free Function Terms And Conditions: • Inclusive Of Tax, Lto Registration With At Least Three (3) Years Validity. • Three (3) Years Warranty Or 100,000 Km Whichever Comes First. • Free Labor 1500km & 15000km Pms. • Free Inspection And Diagnosis In Service Center. • Free Ewd And Set Of Standard Tools Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Open To All Interested Bidders, Whether Local Or Foreign, Subject To The Conditions For Eligibility Provided In The 2016 Revised Irr Of Ra No. 9184. 4. Prospective Bidders May Obtain Further Information From The Bids And Awards Committee Of The Municipal Government Of La Trinidad, Benguet And Inspect The Bidding Documents At The Municipal General Services Office-extension, 1st Floor Brgy. Pico Barangay Hall, Km. 5 Pico, La Trinidad, Benguet From 8:00am To 5:00pm, Mondays To Fridays. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 8 – 29, 2025 At Municipal General Services Office-extension, 1st Floor Brgy. Pico Barangay Hall, Km. 5 Pico, La Trinidad, Benguet And Upon Payment Of A Non-refundable Fee For The Bidding Documents In The Amount Of Five Hundred Pesos (php500.00). It May Also Be Downloaded Free Of Charge From The Philippine Government Electronic Procurement System (philgeps) Website, Provided That Bidders Pay The Applicable Fee For The Bidding Documents No Later Than The Submission Of Their Bids. 6. The Municipal Government Of La Trinidad, Benguet Will Hold A Pre-bid Conference On January 15, 2024 At 10:00am At The 2nd Floor Municipal Disaster Risk Reduction Office, Km. 5 Pico, La Trinidad, Benguet Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Municipal General Services Office-extension, 1st Floor Brgy. Pico Barangay Hall, Km. 5 Pico, La Trinidad, Benguet On Or Before January 29, 2025 At 9:00am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. 9. Bid Opening Shall Be On January 29, 2025 At 10:00am At The 2nd Floor Municipal Disaster Risk Reduction Office, Km. 5 Pico, La Trinidad, Benguet. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Municipal Government Of La Trinidad, Benguet Reserves The Right To Reject Any And All Bids, Annul The Bidding Process, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Corazon A. Uyaan Head Bac Secretariat Bids And Awards Committee Office Municipal General Services Office-extension 1st Floor Brgy. Pico Barangay Hall, Km. 5 Pico, La Trinidad, Benguet Contact Nos.: 0969–334–9233 Or (074) 619–2103 E-mail Address: Bac01latrinidad@yahoo.com Approved: (sgd.) Yoshio P. Labi Bac Chairperson Noted: (sgd.) Romeo K. Salda Head Of The Procuring Entity

Details: Description Republic Of The Philippines Batangas State University Batangas City Request For Quotation "procurement Of Materials For The Improvement Of Red Spartan Digital Printing Hub Location" 1. The Batangas State University (batstate U) Through The Bids And Awards Committee Invites Interested Firms/supplier To Submit Quotation For The Project "procurement Of Materials For The Improvement Of Red Spartan Digital Printing Hub Location" With An Approved Budget For The Contract (abc) Two Hundred Thirty-three Thousand Two Hundred Seventy Pesos And Fifty-nine Centavos Only (php 233,270.59). Quotation Received In Excess Of The Abc Shall Be Automatically Rejected At The Opening. Item No. Qty Description Total 1 711 Piece 1" Fiber Cement Board Screw 497.70 2 250 Piece 1" Gypsum Screw 157.50 3 2 Piece 1-gang Switch, 10a, 240v W/ Plate & Cover 308.00 4 7 Piece 12mm Thk. X 4' X 8' Gypsum Board 5,731.25 5 10 Piece 2" Paint Brush 826.00 6 2 Piece 2" X 250' Mesh Tape 375.00 7 6 Piece 2" X 250' Mesh Tape 750.00 8 1 Piece 2-gang Switch, 10a, 240v W/ Plate & Cover 266.00 9 7 Set 2x20w, 2000 Lumens, Led Batten Light, Surface Mounted 18,326.00 10 9 Piece 3/4" Thick X 4'x8'x (24kg) Marine Type Plywood 20,790.00 11 30 Piece 35mm X 76mm X 0.50mm X 3m Metal Studs 5,625.00 12 20 Piece 35mm X 76mm X 0.50mm X 3m Metal Track 3,750.00 13 2 Piece 4 Pin Industrial Socket 3p 2,520.00 14 10 Piece 4" Roller Brush With Handle 630.00 15 20 Piece 4.5mm Thk. X 4' X 8' Fiber Cement Board 15,850.00 16 4 Piece 4in X 4in X 3mm Ball Bearing Hinges 1,750.00 17 1 Piece 60at 3p Cb (tapping Point) 7,140.00 18 1 Lot Assorted Fittings 2,800.00 19 4 Piece C-channel 1mm X 12mm X 38mm X 5m 1,042.96 20 1 Bag Cement 295.00 21 3 Kilogram Common Wire Nail Asstd 378.00 22 45 Meter Copper Wire 14.0mm² Thhn/thwn 6,306.30 23 195 Meter Copper Wire 3.5mm² Thhn/thwn 7,495.80 24 29 Meter Copper Wire 5.5mm² Thhn/thwn 1,705.78 25 29 Meter Copper Wire 8.0mm² Thwn/thhn 2,668.58 26 8 Piece Duplex Receptacle, Universal Type With Grounding Slot, 16a, 240v, (wall-mounted, Ceiling Mounted) 1,456.00 27 1 Piece Door 0.80m X 2.10m Mdf Interior Door With Jamb 7,500.00 28 1 Piece Door 0.80m X 2.10m X 1/2" Thk. Clear Tempered Glass In Top And Bottom Frame With Stainless Door Handle And Complete Accessories And Frosted Sticker 13,557.60 29 1 Piece Door Lock Set Door Lock Set - Cylindrical 475.00 30 10 Piece Double Furring 0.50mm X 19mm X 5m 2,187.50 31 15 Piece Emt Pipe, 32mmø (1"ø), Thick Wall 17,715.60 32 5 Roll Electrical Plastic Tape, Big (flame Retardant) 350.00 33 65 Piece Emt Pipe, 15mmø (½"ø), Thick Wall 22,759.10 34 11 Piece Emt Pipe, 25mmø (½"ø), Thick Wall 8,105.57 35 3 Liter Flat Enamel 918.75 36 4 Liter Flat Latex 1,035.00 37 1 Gallon Glazing Putty 923.75 38 2 Gallon Gypsum Putty (4 Ltrs.) 850.00 39 4 Gallon Latex Top Coat 3,150.00 40 5 Liter Latex Top Coat 1,375.00 Page 1 Of 2 Item No. Qty Description Total 41 1 Assembly Mdp 28,583.10 42 1 Lot Other Supports & Fittings/hardware Needed Not Mentioned Above 1,400.00 43 2.5 Gallon Primer 2,093.75 44 3 Liter Primer 817.50 45 6 Liter Putty 1,387.50 46 4 Liter Quick Drying Enamel 1,035.00 47 5 Kilogram Rags/newspaper 218.75 48 0.1 Cubic Meter Sand 0.10 Cu. M. 147.50 49 60 Piece Sand Paper For Wood And Drywalls 1,125.00 50 11 Piece Suspension Clip With Rod Joiner 1,691.25 51 3 Liter Thinner 600.00 52 22 Piece W-clip (double) 137.50 53 10 Piece Wall Angle 50mm X 25mm X 3m 625.00 54 4 Gallon Wood Glue 1,456.00 55 3 Liter Wood Prime 825.00 56 7 Set Μpvc Junction Box With Cover, 4" Orange Octagonal 274.40 57 13 Set Μpvc Utility Box, 2"x4" Orange 509.60 Note: Kindly Indicate The Brand On Your Quotation. 2. Philgeps Registration Certificate And Other Business Permits Shall Be Attached Upon Submission Of The Quotation. 3. The Quotation Must Be Submitted (can Also Be Send Thru Fax And Email At The Contact Details Listed Below) Or To The Rizal Avenue Extension, Batangas City And Shall Be Received By The Committee On Or Before 5:00 Pm Of January 08, 2025. E-mail : Procurement.central.external@g.batstate-u.edu.ph 4. The Bsu Reserves The Right To Reject Any Or All Quotations And/or Proposals And Waive Any Formalities/informalities Therein And To Accept Such Bids It May Consider As Most Advantageous To The Agency And To The Government. Batstate U Neither Assumes Any Obligation For Whatsoever Losses That May Be Incurred In The Preparation Of Bids, Nor Does It Guarantee That An Award Will Be Made. Mr. Jonas Erik L Ebora Assistant Director, Procurement Rizal Avenue Extension, Batangas City 980-0385 Loc. 1230

Details: Introduction: in Accordance With Federal Acquisition Regulation (far) 10.002(b)(2), This Sources Sought Notice Is For Market Research And Information Purposes Only At This Time And Shall Not Be Construed As A Solicitation Or As An Obligation On The Part Of The Department Of Veterans Affairs (va). the Department Of Veterans Affairs, Veterans Health Administration (vha), Program Contracting Activity Central (pcac) Is Conducting A Market Survey And Is Seeking Potential Sources For Project 693-22-700 Construct Ehrm Infrastructure Upgrades At The Wilkes-barre Va Medical Center (vamc) Located In Wilkes-barre, Pennsylvania. project Description: the Scope Of Work Shall Generally Consist Of Providing All Labor, Materials, Tools, Equipment, Permits, Testing, And Reports Required To Perform Electronic Health Records Management (ehrm) Infrastructure Upgrade, Located At The Wilkes Barre Va (vamc), As Generally Described In This Scope Of Work, But Detailed In Drawing Set Titled: Ehrm Infrastructure Upgrades. Vamc Wilkes-barre Pennsylvania, Usa, Project #: 693-22-700. The Projects Outcome Will Be A New Data Network On The Wbva Campus. the Ehrm Infrastructure Upgrade Project Is A Multi-phase Project. Key Elements Include, But Not Limited To: 1) Construct A New Building To House A Data Center, Including, But Not Limited To Demolition Of Two Existing Pre-manufactured Buildings, Rerouting A Fire Protection Service Line, New Building Shell, Interior Walls, Finishes, And All Mechanical, Electrical And Plumbing Systems And Data Room Construction As Defined By Drawings And Specifications. 2) Construct And/or Renovate Over Twenty-five Telecom Rooms (tr) With Accompanying Network Equipment, Climate Controls And Electrical Upgrades. 3) Install, Terminate, And Test Over Six-thousand Cat 6a Network Cables From The Respective Tr To Each Work Area Outlet (wao) Location. 4) Construct Underground Ductwork System To Connect Several Buildings To The New Data Center. 5) Install Fiber Optic Cables. 6) Demolition Of Legacy Trs And Removal Of Associated Network Equipment And Network Cables. procurement Information: the Proposed Project Will Be A Competitive, Firm-fixed-price Contract Utilizing The Design-bid-build Approach (final Specifications And Drawings Will Be Provided). The Anticipated Solicitation Will Be Issued Either As A Request For Proposal (rfp) In Accordance With Far Part 15, Considering Technical And Price Factors Or As An Invitation For Bid (ifb) In Accordance With Far Part 14, Considering Price Only. The Results And Analysis Of The Market Research Will Finalize The Determination Of The Procurement Method. The Type Of Socio-economic Set-aside, If Any, Will Depend Upon The Responses To This Notice And Any Other Information Gathered During The Market Research Process. this Project Is Planned For Advertising In April, 2025. In Accordance With Vaar 836.204, The Magnitude Of Construction Is Between $20,000,000.00 And $50,000,000.00. The North American Industry Classification System (naics) Code 236220 (size Standard $45.0 Million) Applies To This Procurement. The Duration Of The Project Is Currently Estimated At 548 Calendar Days From The Issuance Of A Notice To Proceed. The Services For This Project Will Include Providing All Construction Related Services Such As: Providing Tools, Labor, Materials, Equipment, Permits, Licenses, Supervision, And Quality Control Required To Complete The Project As Per Contract Documents Prepared By An Independent Architect-engineer Firm. capability Statement: respondents Shall Provide A General Capabilities Statement To Include The Following Information: section 1: Provide Company Name, Duns Number And Unique Entity Identifier (uei), Company Address, Point-of-contact Name, Phone Number And Email. section 2: Provide Company Business Size Based On Naics Code 236220. Also, Provide Business Type (i.e., Large Business, Small Business, Service-disabled Veteran Owned Small Business, Small Disadvantaged Business, Women-owned Small Business, Hub Zone Small Business, Etc.). section 3: Provide A Statement Of Interest In The Project. Please State Your Intent To Submit A Bid On This Project If The Only Evaluation Factor Is Price (far Part 14). Please Also State Your Intent To Submit A Proposal If The Solicitation Contains Both Price And Non-price Evaluation Factor (far 15). section 4: Provide The Prime Contractor’s Available Bonding Capacity In The Form Of A Letter Of Intent From Your Bonding Company With This Submission. *please Ensure That The Individual Bonding Capacity Is In Line With The Vaar Magnitude Of Construction Listed Above. Letter Should Include Single Award Limit, Aggregate Limit And Available Bonding Capacity. section 5: Provide The Type Of Work Your Company Has Performed In The Past In Support Of The Same Or Similar Requirement. This Section Is Important As It Will Help To Determine The Type Of Socio-economic Set-aside, If Any. Please Provide The Following In Your Response: no More Than Three (3) Contracts That Your Company Has Performed Within The Last Six (6) Years That Are Of Comparable Size, Complexity, And Scope To This Requirement. Include The Project Name, Project Owner And Contact Information As This Person May Be Contacted For Further Information, Project Scope, Project Size (example: Square Footage), Building Use (example: Medical Facility, Office Building, Etc.), Project Dollar Value, Start And Completion Dates. provide Specific Examples That Relate Aspects Of Previous Projects To The Proposed Project. Describe Specific Technical Skills And Key Personnel Your Company Possess To Perform The Requirements Described Under Description Of Work. describe Your Self-performed** Effort (as Either A Prime Or Subcontractor). Describe Self-performed Work In Terms Of Dollar Value And Description. **self-performed Means Work Performed By The Offeror Themselves, Not Work Performed By Another Company For Them For Any Of The Project Examples Provided. it Is Requested That Interested Contractors Submit A Response (electronic Submission) Of No More Than Eight (8) Single Sided Pages, Single-spaced, 12-point Font Minimum That Addresses The Above Information. This Response Must Be Submitted As A Single Application-generated (not Scanned) Pdf Document That Is Less Than Or Equal To 4mb In Size. Please Note That Hard Copies Will Not Be Accepted. Please Also Include A Cover Page, Which Includes, At A Minimum: The Company’s Name, Address, Unique Entity Identifier (if Available), Socio-economic Status, Point-of-contact Name, Phone Number, And E-mail Address. Responses Must Include The Sources Sought Number And Project Title In The Subject Line Of Their E-mail Response. Submissions (responses) Shall Be Submitted Via Email To The Primary And Secondary Points Of Contact Listed Below By 1-31-2025 At 4:00 Pm Et. No Phone Calls Will Be Accepted. the Capabilities Statement Submitted In Response To This Sources Sought Shall Not Be Considered To Be A Bid Or Proposal. This Notice Is For Information And Planning Purposes Only And Is Neither To Be Construed As A Commitment By The Government Nor Will The Government Pay For Information Solicited. No Evaluation Letters And/or Results Will Be Issued To The Respondents. After Completing Its Analyses, The Government Will Determine Whether To Limit Competition Among The Small Business Categories Listed Above Or Proceed With Full And Open Competition As Other Than Small Business. at This Time No Solicitation Exists; Therefore, Please Do Not Request A Copy Of The Solicitation. If A Solicitation Is Released It Will Be Synopsized In Contract Opportunities At Https://sam.gov/. It Is The Potential Offeror's Responsibility To Monitor This Site For The Release Of Any Solicitation Or Synopsis. contracting Office Address: vha Program Contracting Activity Central (vha-pcac) 6100 Oak Tree Blvd. Suite 490 independence, Oh 44131 primary Point Of Contact: benjamin Niznik contract Specialist benjamin.niznik@va.gov secondary Point Of Contact: samantha Mihaila contracting Officer samantha.mihaila@va.gov

Details: This Is A Sources Sought Synopsis Announcement, A Market Survey For Information To Be Used For Preliminary Planning Purposes. The Information Received Will Be Used Within The Navy To Facilitate The Decision Making Process And Will Not Be Disclosed Outside Of The Agency. The Intent Of This Sources Sought Synopsis Is To Identify Potential Qualified Small Businesses, U.s. Small Business Administration (sba) Certified 8(a) Businesses, Sba Certified Hubzone Small Businesses, Women-owned Small Businesses, And/or Service-disabled Veteran-owned Small Businesses. this Sources Sought Synopsis Is One Facet In The Government’s Overall Market Research In Regards To Whether The Proposed Solicitation Will Be Issued As A Competitive Set-aside Or As Full And Open (unrestricted). No Procurement Strategy Will Be Determined Based Solely On The Information Received In Response To This Sources Sought Synopsis. no Reimbursement Will Be Made For Any Costs Associated With Providing Information In Response To This Announcement Or Any Follow-up Information Requests. This Notice Does Not Constitute A Request For Proposal And Is Not To Be Construed As A Commitment By The Government For Any Purpose Other Than Market Research. Respondents Will Not Be Notified Of The Results Of This Market Research. naval Facilities Engineering Systems Command (navfac) Southwest Is Seeking Small Business, Sba Certified 8(a) Business, Sba Certified Hubzone Small Business, Women-owned Small Business, And/or Service-disabled Veteran-owned Small Business Sources With Current And Relevant Experience, Personnel, And Capability To Perform A Multiple Award Construction Contract For New Construction, Repair, And Renovation Of Commercial And Institutional Buildings Using Acm At Various Government Installations Located In California, Nevada, Arizona, Colorado, Utah, And New Mexico. However, It Is Anticipated That Most Projects Will Be Performed In The State Of California. the North American Industry Classification System (naics) Code Is 236220 (commercial And Institutional Building Construction) With A Small Business Size Standard Of $45 Million. Task Orders Issued Under The Proposed Multiple Award Contract(s) Will Be Performed At Various Government Installations Within The Area Of Responsibility (aor) Of Naval Facilities Engineering Systems Command Southwest Including, But Not Limited To, California, Arizona, Nevada, Utah, Colorado, And New Mexico. However, It Is Anticipated That Most Projects Will Be Performed In The State Of California. The Proposed Contract(s) Will Be For One (1) Base Period Of Two (2) Years And Three (3) Option Periods Of One (1) Year, Resulting In The Contract Performance Period Maximum Of Five (5) Years. The Estimated Total Contract Price For The Base Period And One Option Period For All Contracts Combined Is $1,500,000,000. The Task Order Range Is Estimated Between $15,000,000 And $150,000,000. projects Will Be Design-build For New Construction, Repair, And Renovation Of Commercial And Institutional Buildings Using Alternate Construction Methods (acm). Examples Of Acm May Include, But Are Not Limited To: Modular Units, Pre-fabricated And Pre-engineered Structures, Tension Fabric Structures, Tilt-up Walls, And Interior Modular Systems. Projects May Include, But Are Not Limited To: Airport Building, Office/administrative Building, Communications Facility, Vehicle Maintenance Facility, Armories, Parking Garage (paved Parking Lots Will Not Be Considered Relevant), Barracks Facility, Prison Facility, Fire Station, Dining Facility, Hospital/medical Facilities, Warehouse Facility, School Facility, Child Care Facility, And/or Retail Facility. For This Announcement, New Construction And/or Repair Of Single Family Homes Will Not Be Considered Relevant. interested Sources Are Invited To Respond To This Sources Sought Announcement By Using The Form Provided Under Separate File Titled “sources Sought Information Form”. The Following Information Shall Be Provided: 1) Contractor Information: Provide Your Firm’s Contact Information, Including Uei Number And Cage Code. 2) Type Of Business: Identify Whether Your Firm Is A Small Business, Sba Certified 8(a), Sba Certified Hubzone, Service-disabled Veteran-owned, And/or Women-owned Small Business Concern. For More Information On The Definitions Or Requirements For These Small Business Programs, Refer To Http://www.sba.gov/. 3) Bonding Capacity: Provide Your Surety’s Name, Your Maximum Bonding Capacity Per Project, And Your Aggregate Maximum Bonding Capacity. 4) Locations: Identify The Locations In Which You Are Willing And Capable To Work. 5) Experience: Submit A Minimum Of Three (3) And Maximum Of Five (5) Recent Specific Government Or Commercial Projects Your Firm Has Performed To Demonstrate Your Experience In The Construction, Repair, Or Renovation Of Commercial And Institutional Buildings Using Acm And Design-build As Indicated In This Announcement. A Specific Project Is A Single Project Or A Single Task Order Under An Indefinite Quantity Contract Or On-call Type Contract. “recent” Is Defined As Having Been 100% Completed Within The Seven (7) Years Prior To The Sources Sought Synopsis Issuance Date. All Projects Shall Have A Minimum Construction Cost Of $15,000,000. Projects Which Do Not Meet These Requirements May Not Be Considered Relevant. additional Submission Requirements: at Least One (1) Relevant Project With A Construction Cost Of $50,000,000 Or Above. at Least One (1) Relevant Project Demonstrating Experience With The New Construction Or Repair Of An Aircraft Hangar Or Vehicle Maintenance Facility. for Each Of The Projects Submitted For Experience Evaluation, Provide The Following: title And Location award And Completion Dates contract Or Subcontract Value type Of Work For Overall Project And Type Of Work Your Firm Performed current Customer Information Including Point Of Contact, Phone Number And Email Address whether The Work Was Performed As A Prime Or Subcontractor type Of Contract (design-build – See Sources Sought Information Form) narrative Project Description To Include Acm Components Used, Subcontractors/vendors Used And Acm’s Effect On The Project’s Cost And Schedule for Design-build Projects, Identify The Name And Address Of The A-e Firm Used To Provide Design Or Specify If Design Was Performed In-house. Identify Your Working Relationship With The Design Firm (i.e., Number Of Years Working Together). 6) Safety: Submit Osha Days Away From Work, Restricted Duty, Or Transfer (dart) Rates And Total Case Rate (tcr) For Each Of Calendar Years 2019, 2020, 2021, 2022 And 2023. For Any Dart Rate Of 3.0 Or Greater Or Any Tcr Of 4.5 Or Greater, Provide An Explanation To Address The Extenuating Circumstances That Affected The Rate And Any Corrective Actions Taken. Instructions For Calculating The Dart Rate And Tcr Can Be Found At Http://www.bls.gov/iif/osheval.htm. For Joint Ventures Or Mentor-protégé Agreements (mpa), Provide The Required Information For Each Entity In The Joint Venture Or Mpa. Navfac May Make An Acquisition Strategy Determination That Excludes Contractors That Do Not Submit The Required Information Or Contractors With Unexplained High Dart Or Tcr Rates From The Pool Of Sufficiently Qualified Contractors. in Sections Where Recent Experience Is Requested, All Experience Will Be Evaluated For Market Research Purposes Only. Firms Are Advised That While Experience Older Than Seven (7) Years Or Not Yet 100% Complete May Demonstrate Capability To Perform The Scope Of Work, It May Not Indicate That The Firm Could Be Competitive During A Future Solicitation Where Only The Most Recent Seven (7) Years Of Experience Will Be Accepted. Navfac May Make An Acquisition Strategy Determination Based On The Likelihood That A Sufficient Pool Of Qualified Contractors Will Be Competitive On A Future Solicitation. responses To This Sources Sought Announcement Are Due No Later Than 2:00 P.m. (pacific Standard Time) On January 8, 2024. Please Email Your Response, In A Pdf Format, To Shane.k.mahelona.civ@us.navy.mil. All Navfac Southwest Solicitations Are Posted On The Website At Https://sam.gov And Begin With “n62473.”