GOVERNOR CELESTINO GALLARES MULTI SPECIALTY MEDICAL CENTER Tender

Description Gov. Celestino Gallares Multi-specialty Medical Center Invitation To Bid For Supply, Delivery, Installation, Testing And Commissioning Of 4 Lots Various Medical Equipment (batch 1) For Gov. Celestino Gallares Multi-specialty Medical Center 1. The Gov. Celestino Gallares Multi-specialty Medical Center (gcgmsmc), Through The Health Facilities Enhancement Program 2024 Intends To Apply The Sum Of Thirty-five Million Three Hundred Fifty-five Thousand Pesos Only (php35,355,000.00) Being The Abc To Payments Under The Contract For Cb-2024-10-0003. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Gcgmsmc, Through The Health Facilities Enhancement Program 2024 Intends To Apply The Sum Of Thirty-five Million Three Hundred Fifty-five Thousand Pesos Only (php35,355,000.00) Being The Abc To Payments Under The Contract For Each Lot/item.et Al. Lot No. Item/description Quantity Unit Cost Total Cost 1 Body Box+spirometry 1 7,000,000.00 7,000,000.00 2 Multi-channel Digital Holter 1 3,000,000.00 3,000,000.00 3 Various Laboratory Equipment 1 5,355,000.00 5,355,000.00 4 Thoracic Multidisciplinary Tower, Surgery 1 20,000,000.00 20,000,000.00 Grand Total 35,355,000.00 Bids Received In Excess Of The Abc For Each Lot Shall Be Automatically Rejected At Bid Opening. 2. The Gcgmsmc, Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within 120 Calendar Days And Succeeding Installation Must Not Exceed 120 Calendar Days. Bidders Should Have Completed, Within 3 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Gcgmsmc Through Electronic Mail Via Procurement@cpspecialtycenter.org Or Through The Cellular Number 09209437250. 5. A Complete Set Of Bidding Documents May Be Acquired And Downloaded By Interested Bidders From Gcgmsmc Google Drive From (procurement@cpspecialtycenter.org) On October 30- November 19, 2024 And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Indicated Below In Accordance With The Following Schedule: Lot No. Item/description Total Cost Bidding Documents Fee (in Philippine Peso) 1 Body Box+spirometry 7,000,000.00 10,000.00 2 Multi-channel Digital Holter 3,000,000.00 5,000.00 3 Various Laboratory Equipment 5,355,000.00 10,000.00 4 Thoracic Multidisciplinary Tower, Surgery 20,000,000.00 25,000.00 The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Through Online Banking Or Online Deposit With The Following Bank Details: Bank Name: Development Bank Of The Philippines Account Name: Gcg Multi-specialty Medical Complex Account Number: 00-0-15490-780-5 For Bidders Choosing To Pay Via Online Transfer Or Bank Deposit, Please Ensure That Proof Of Your Successful Transaction Is Promptly Sent To The Procurement Email Address: Procurement@cpspecialtycenter.org. In Compliance With Coa Circular Number 2021-014, Clause 5.2, An Acknowledgement Receipt Will Be Issued As Proof Of Verified And Received Payment. Access To Bidding Documents Will Be Granted Only Upon Presentation Of This Acknowledgement Receipt. 6. The Gcgmsmc Will Hold A Pre-bid Conference On The 7th Day Of November 2024 At 0900h At Room 3c-e310 Located At The 3rd Floor Of Gcgmsmc Building C, Malayo Sur, Cortes, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission On Or Before The 19th Day Of November 2024 At 0900h At Gcgmsmc Procurement Office Room 3c-w327 Located At The 3rd Floor Of Gcgmsmc Building C, Malayo Sur, Cortes, Bohol Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On The 19th Day Of November 2024 At 0900h At Room 3c-e310 At The 3rd Floor Of Gcgmsmc Building C, Malayo Sur Cortes. Bids Will Be Opened In The Presence Of The Bidders’ Authorized Representatives Together With Their Company Id. 10. The Gcgmsmc Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Mary Grace L. Simbajon Procurement Office Malayo Sur, Cortes, Bohol Procurement@cpspecialtycenter.org +639209437250 Jessa O. Quiñal Procurement Office Malayo Sur, Cortes, Bohol Procurement@cpspecialtycenter.org +639452478632 October 28, 2024 Approved By, (signed) Doreen A. Lugo, Lpt Bac Chairperson Noted By, (signed) Laurence Elliot R. Tirol, Md, Fpcp Medical Center Chief I Head Of Procuring Entity .<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>. Item: 1 Unit: Lot Qty: 1 Unit Cost: 7,000,000.00 Total Cost: 7,000,000.00 Description: Body Box+spirometry Measurement (specific) Airway Resistance: Reff, Srtot, Sr0.5, Srmid As Well Asreff, Rtot, R0.5, And Rmid Static Lung Volumes: >absolute Lung Volumes: Tlc, Frcpleth, Rv, Rv/tlc And Others; >static Lung Volumes: Vc Max, Ic, Erv And Others Dynamic Lung Volumes: Fvc, Fev1, Fev1/fvc, Mfef 25-75, Fef 75, Pef And Others Dlco: Co Diffusion Real Time (rt) And Intra Breath (ib) Additional Software's: - Mip/mep - Bronchial Challenge Components Airtight Box With Panorama Glazing,integrated Control Units And New Digital Ambient Pressure Compensation Circuit Calibration-free And Waterproof Ultrasonic Flow Sensor At Least 1000-1120 Liters Internal Volume (body Box) Pc With Hygiene Keyboard/mouse, Inkjet Printer, And 24° Lcd Flatscree Monitor On An Ergonomic, Smooth-running Trolley Complete Software Package For Measurement And Report Generation Plus Extended Infrastructure For Data Management Flow Measurement Type: Ultrasound Methodological Peculiarities: Simultaneous Measurement Of Ultrasound Transit Time In And Against Flow Direction Sample Rate: True 1000 Hz For Flow, Achieved By 2000 Ultrasound Transit Time Measurements Range: 0 To 18 L / S Bidirectional Accuracy: Exhalation 0 To 14 L / S: 1.5 % Or 0.05 L / S ; Inhalation 0 To 14 L/s: 2.0 % Or 0.05 L/s Precision: At Least 1% Or 0.1 L / S Resolution: At Least 1ml/s Total Resistance: <0.150 Kpa *s/l At 14 L/s Dead Space Ultrasonic Sensor (uss) Module: 66 Ml Volume Integration Principle: Software Volume Integration Of Flow Signal (ultrasound) Range: At Least 30 L Accuracy: Exhalation And Inhalation 0.5 To 14l/s Precision: At Least 0.05 L Resolution: At Least 1 Ml Mouth Pressure Measurement Type: Piezo Resistive Or It's Equivalent Range: ± 18 To ±30 Kpa Accuracy: ± 1 % Or 0.01 Kpa (0.075 Mmhg) Resolution: At Least 0.003 Kpa (0.0225 Mmhg) Box Signal Transducer Type: Piezo Resistive, Calibrated In Terms Of Shift Volume Or It's Equivalent Transducer Range: 0 To ± 2500 Ml At 1000 Hpa Ambient Pressure Accuracy: At Least ± 2 % At 0.25 Hz / 0.5 Hz Compensation Of Ambient Pressure Variations: Digital Ambient Pressure Compensation Or It's Equivalent Box Material: Aluminium /glass Construction Principle: Volume-constant Volume: At Least 1110 L Height Step-in: At Least 2- 6 Inches Weight: At Least 175 Kg (385 Lbs), At Least 150 Kg (330 Lbs) Without Door Door-lock: Electromagnetic Via At Least 8 Magnets; Stable Hand Grip: With Safety Stable Hand Grip Must Be On The Side Of The Box Upon Entry For Safety Of The Patient Size Outside: (at Least 932mm L) X (at Least 80 Mm W) X (at Least 1,850 Mm W) ; Including Door Handle Interface To Pc: Usb Box Calibration Syringe Calibration Volume: At Least 50 Ml, Motor-driven Calibration Pump Calibration Frequency: 0.25 Hz, 0.5 Hz, And 1 Hz Bench Maximal Load Bench: At Least 250 Kg (551 Lbs) Sitting Height: At Least 47.6 Cm (18.7") Sitting Area: At Least (50.6 Cm W) X At Least ( 33.0cm D), ( 19.9"x 13.0") Flexible 3d Arm Can Be Extended Outside Of The Cabin Up To An Impressive Reach : At Least 63 Centimeters (cm) Adjustable Height Inside Cabin: 98.3 Cm To 141.5 Cm Work Station Dimensions: (at Least 61 Cm W) X (at Least 62 Cm D) X (at Least 120 Cm H); ( 24"x24.4"x47.3") Weigh Total: Atleast 45 Kilogram (kg) Inclusion Of Pc, Printer And Lcd Monitor. Pc: 12th Generation Intel Core I5-10400t 35 W 6 12 2.0 Ghz To 3.6 Ghz 12 Mb Intel Uhd Graphics 630. Height: Front Height At Least 182.00mm (7.16 Inches) ; Rear Height Atleast 182 Mm ( 7.16 Inches); Width: At Least 178.50mm (7.02inches); Depth: At Least 36.00 Mm ( 1.42 In); Weight At Least 1.17 Kg ( 2.58 Lb). Monitor: Diagonal Viewing Size 604.70 Mm (at Least 23.8 Inches) Printer Iso Speeds: Up To 18 Ppm Black, Up To 10 Ppm Color Display: Button And Led Control Panel Standard Connectivity: 1 Usb 2.0; 1 Ethernet; 1 Wireless 802.11b/g/n Paper Handling: 225-sheet Input Tray; 60-sheet Output Tray Duty Cycle: Up To 15,000 Pages Borderless: Yes, Up To 8.5 X 11 In (us Letter), 210 X 297 Mm(a4); Ink: Yellow 935 Xl , Cyan 935 Xl, Magenta 935 Xl, And Black 934 Xl At Least Four (4) Swivel Castor , Lockable At Least One (1) Shelf One (1) Webcam One (1) Microphone Keyboard Drawer With Mousepad (left/right): Keyboard Platform Area (at Least 40cm W) X (at Least 20 Cm D) (15.7" X 7.9"); Load Capacity At Least 3(kg) ( 6.6llbs) Distributed Load; Mouse Pad Can Be Extended From Left To Right And Vice Versa. Drawer: Interior Area: (34 Cm W) X (24 Cm D) X ( 8cm H) (13.4 "x 9.4" X 3.1") ; Platform Area: 45 Cm W X 36 Cm D ( 17.7 X 14.2") ; Load Capacity Shelf: At Least 15 Kg (33lbs) Distributed Load ; Load Capacity Drawer: At Least 3 Kg ( 6.6 Lbs) Distributed Load. Monitor Mount: Load Capacity At Least 14 Kg ( 30.9 Lbs) Electrical Safety: Protection Class I Diffusion Measurement Type: Infrared Range: 0 To 0.33 Vol % Accuracy: At Least ± 0.003 Vol % Or ± 2 % Relative Resolution: At Least 0.0005 Vol % Response Time: ≤ 145 Ms Pressure Reducer For Demand Valve Inlet Pressure: At Least 200 Bar Outlet Pressure: At Least 7 Bar Flow Rate: At Least 500 L/min, At Most 700 L/min Ambient Measurement Temperature Sensor : Measurement Range: – 10 To 50 °c (14 To 122 °f) ; Accuracy: ± 0.5 °c At 20 °c (68 °f) ± 1 °c At 10 To 34 °c (50 To 93.2 °f) Humidity Sensor : Measurement Range: 0 To 100 % Relative Humidity ; Accuracy: 4 % Relative Humidity At 20 – 80 % Relative Humidity Air Pressure Sensor: Measurement Range: 500 To 1100 Hpa (375 To 825 Mmhg); Accuracy: ± 2.5 Hpa (1.88 Mmhg) At 700 To 1060 Hpa (525 To 795 Mmhg) Ambient Conditions Temperature: + 10 °c To + 34 °c (+ 50 °f To 93.2 °f) Relative Humidity: 20 To 80 % Rh, Non-condensing Ambient Pressure: 700 To 1060 Hpa (525 To 795 Mmhg) Transport And Storage Conditions Temperature: – 20 °c To + 50 °c (– 4 °f To 122 °f) Relative Humidity: 15 To 95 % Rh, Non-condensing Ambient Pressure: 600 To 1200 Hpa (450 To 900 Mmhg) Power Supply (cabin) Mains Voltage: 100 To 240 V, Ac 50 To 60 Hz Power Input: Max. 80 Va Electrical Safety: Protection Class I Moisture Protection At Least Ip 20 Operating Mode Complete System: Continuous Operation Measurement Programs Body Plethysmography Forced Spirometry (fvc) / Slow Spirometry (svc) / Mvv Spirometry Animation Programs Single-breath Co-diffusion Realtime And Intrabreath Bronchial Challenge Calibration Program Volume Calibration Gas Calibration Body Box Calibration Organization Programs Patient Data Report Output Inclusive Multiformat Output Must Be But Not Limited To Pdf, Jpg, Tiff, And Rtf. Auto Interpretation Ats/ers Quality Check Comments / Physician Interpretation Report Designer For Generating Customized Reports Predicted Values / Reference Sets Design / Editor Offline Data Input Backup / Restore Data Export / Import User Parameter Editor For Customized Parameters Patient Data Management For Advanced Corrective Actions ; Questionnaire Designer For Customized Questionnaires Gdt Connection Spirometer Data Transfer ( Microloop, Microlab, Flowscreen, Spiropro) Security And User Administration Accessories At Least Two Hundred Fifty (250) Pieces Disposable Filter And At Least 250 Pieces Noseclip. One (1) Unit Of Uninterruptible Power Supply (ups) 2 Kva For Printer, Monitor And Pc. One (1) Unit Of Uninterruptible Power Supply (ups) 2 Kva For Body Box. Two (2) Units Of Automatic Voltage Regulator (avr) 2 Kva. Set Of Ink: (1) Pack 935 Xl Yellow; (1) Pack 935 Xl Cyan; (1) Pack 935 Xl Magenta, And (1) Pack 934 Xl Black. With At Least ( One) 1 50 Lbs/ 22.68 Kg Dlco Gas & Two (2) Gauges. Particulars Vendor Shall Warrant That The Product Supplied Shall Equal The Published Specifications. Vendor Shall Provide No Less Than Five (5) Years Warranty On The System/equipment For Spare Parts And Service Upon Acceptance By End User/s. Vendor Shall Provide Certificate Of Parts Availability For 10 Years In The Market. Vendor Agrees To Provide Free Of Charge All Parts And Labour Necessary To Repair The System During The Period Covered By The Warranty And Replacement Of Any Item/s And/or Part/s Found To Be Defective In Material Or Workmanship Under Normal Use. Vendor Must Conduct Quarterly Preventive Maintenance Program And Provide Preventive Maintenance Report Within The Warranty Period. Vendor Agrees To Add Equipment Down-time (in Number Of Days) To Total Warranty Period. Vendor Must Respond With Technical Support Staff Response Time Within At Least 2 Hours Via Remote Access Or In-person Where Applicable, Within At Least Twenty-four (24) Hours Upon Notification Of End-user; And Must Perform Corrective Maintenance Within A Maximum Of Fourteen (14) Days Upon Notification Of End-user. System/equipment Shall Be Delivered With At Least Three (3) Copies Of All Service Manuals And At Least Three (3) Copy Of All User Manuals. System/equipment Shall Be Delivered Complete With All Cabling, Connectors, Junction Boxes, Mounting Hardware, And All Other Accessories Necessary For Full Operation Of The System/equipment, Where Applicable. Vendor Must Certify That All Products Quoted Must Be In Current Production And Publicly Available As Of The Date Of This Tender. Unproven Future Products Shall Not Be Accepted. All Desired Features Listed Must Be In Current Production, Installed And In Use At The Time Of Quote/bid. Any And All Software Necessary To Technically Support The System Shall Be Included. Any And All Components Not Manufactured By The Vendor/primary Manufacturer Shall Be Listed As Such With Name/address/contact Information Of The Manufacturer Supplied. Devices Must Meet All Currently Applicable Safety Standards, Local And International Where Applicable. Vendor Shall Confirm And Certify In Writing That Parts And Labor Will Be Available For The Quoted System For Not Less Than Five (5) Years After The Warranty Period Vendor Shall Agree To Provide Factory Or Principal Manufacturer Technical Training With Certificate For At Least Two (2) In-house Biomedical Technologist Or Engineer And/ Or Two (2) To Three (3) Respiratory Therapist's With Free Of Charge. Vendor Shall Conduct Annual Calibration And Provide Calibration Certificate Within Warranty Period. Vendor Shall Provide Comprehensive Training Of Users In Operation, Basic And Advance Maintenance Shall Be Provided. Vendor Shall Provide Routine Software And/ Or Hardware Upgrade. Vendor May Include Post-warranty Comprehensive Preventive Maintenance Program Proposal For The Next 3-4 Years And Must Also Indicate Cost Estimates For Major Spare Part/s. Vendor To Shoulder Any Expenses Related To Delivery, Installation, Commissioning, Permit/s, Training And Other Sundries Necessary For The Complete Installation Of The Body Box + Spirometry. Vendor Must Have Available Technical Staff And/or Office/s Within Visayas. Manufacturer Should Have An Exisiting Or Active Iso Certification En Iso 13485:2016 Or Its Equivalent For Quality Standard. Vendor Shall Have The Availability Of Stock For Dlco Gas And/ Or Assist The End User To Purchase Dlco Gas From Another Vendor Of Dlco Gas. Principal’s / Manufacturer’s Product Portfolio Must Have Been Present In The Local Market For The Past Ten (10) Years. Progress Billing And Payment May Be Availed By The Winning Bidder As Follows, Otherwise, Full Payment Is Due At The Completion Of The Project And Requirements: 15% Upon Delivery At Site; 30% Upon Complete Installation, And 55% Upon Completion Of Project And/or Acceptance Of End-user. Completion Period For Delivery Must Not Exceed 120 Calendar Days And Succeeding Installation Must Not Exceed 120 Calendar Days. Any Deviation From This Limit Requires Prior Approval By The Head Of The Procuring Entity (hope) And Only Applies During Extenuating Circumstances. .<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>. Item: 2 Unit: Lot Qty: 2 Unit Cost: 1,500,000.00 Total Cost: 3,000,000.00 Description: Multi-channel Digital Holter Holter Recorder/s. Multi-channel, Digital Ecg Channels: 2 Channels; 3 Channels Lead-wire Cable: At Least 7 Lead-wire Recording Time: At Least 24 Hours Light Emitting Diode/s: Event Button Status Indicator Led; Hookup Guidance Led Demographic Data Entry & Hookup Preview: Pc Application Via Bluetooth Communication And/or Mobile Application Via Bluetooth Communication; Data Download And Transfer: Usb 2.0 High Speed Cable; Memory: Non-removable Digital Memory Power Requirements: Hr03/aaa Nimh Rechargeable Battery With Charger; At Least 4 Ports With Extra 16 Pieces Rechargeable Aaa Battery With Two Charger Weight: Up To 53 Grams Dimensions: At Least 71x64x20 Millimeter/s Frequency Response 0.05 Hertz To 70 Hertz Sampling Rate: 256 Sps With 12-bit Resolution Input Voltage Range Ecg: ± 6 Mv Input Impedance >10 M Compatibility With Mobile Application And Pc Application Ingress Protection Rating: Ip43 Auto Start Feature Signal Quality Guidance Patient Data Is Automatically Deleted From Device After The Recording Starts To Ensure No Patient Data Is Left Behind And Ensure Patient Information Is Protected Supports Connection To Ecg Holter Management System For End-to-end Workflow Process From Orders To Final Report Storage By Fully Integrating To A Cardiology Information System Secure Log-in With Administrator Setup Account To Avoid Unauthorized Use Of Devices. Holter Electrocardiogram Management System, 1 System Customized Parameter Set/s Based On Patient Age Groups And Types For Faster Analysis Advanced Heart Rate Trend, Identifies Noise Regions Which Can Be Quickly Added/deleted For Cleaner Data And Spot Potential Atrial Fibrillation (af); Quick Scan: Two Button Workflow Speed Analysis; Prioritized Event Layout: Automatic Critical Events Display In A Separate Tab To Improve View/s Of Pvcs Support For Ecg Algorithm/s Such As Heart Arate Variability (hrv), Qt Measurement, St Segment Measurement; Heart Rate Turbulence (hrt) And/or T-wave Alternates (twa); Dedicated Mode/s For Atrial Fibrillation Cases: 7-day Holter Overview With Ability To Select 48*hour Period For Analyses; Automatic Detection Of Af Episodes; Automatic Sve Suppression During Af; Dedicated Mode/s For Pacemaker Patient/s: Automatically Identifies Pacemaker Type And Sets Parameters; Measures Pulse Width To Ensure Pacemaker Is Working Correctly; Shows Exit Blocks, Over- And Under- Sensing And Fusion Beats; Integrated Ecg Preview App Automation Processes To Streamline Orders And Report Generation And Minimize Manual Data Entry. Allows Satellite Sites To Download Holter Data, Edit Patient Demographics, Edit Patient Events, And Upload The Study For Analysis At A Central Location; Allows Access To Data From Any Workstation Via Floating Licenses Allows Immediate Access To Inpatient Holter Data From Beside Monitor/s And/ Or Telemetry, Allowing For Ecg Algorithms To Be Used In Risk Stratification; Integrated Workflow Minimizes Training Requirements; Security Administrator-controlled User Assigned Privileges Protect Data Security; Single Sign-on To Imply With Comply With Facility Standards For Username; Audit Logging To Facilitate Security Privacy And Regulatory Compliance; Tools To Help Ensure Compliance With Hipaa And Gdpr Standards Data Access To Patient Information Can Be Restricted By Site And Location; System Must Be Integrated With Facility Servers And Deployed Virtually To Simplify Implementation And Management; System Can Be Accessed Remotely By Service Engineers For Maintenance And Troubleshooting Particulars Vendor Shall Warrant That The Product Supplied Shall Equal The Published Specifications. Vendor Shall Provide No Less Than Five (5) Years Warranty On The System/equipment For Spare Parts And Service Upon Acceptance By End User/s. Vendor Agrees To Provide Free Of Charge All Parts And Labor Necessary To Repair The System During The Period Covered By The Warranty And Replacement Of Any Item/s And/or Part/s Found To Be Detective In Material Or Workmanship Under Normal Use. Vendor Shall Conduct Quarterly Calibration And Preventive Maintenance Program And Provide Preventive Maintenance Report Within The Warranty Period. Vendor Agrees To Add Equipment Down-time (in Number Of Days) To Total Warranty Period. Vendor Must Respond With A Technical Support Staff Response Time Within At Least 2 Hours Via Remote Access Or In Person Where Applicable, With At Least Twenty-four (24) Hours Upon Notification Of End User And Must Perform Corrective Maintenance Within A Maximum Of Fourteen (14) Days Upon Notification Of End User. System/equipment Shall Be Delivered With At Least One (1) Copy Of All Service Manuals And At Least Two (2) Copies Of All User Manuals. System/equipment Shall Be Delivered Completely With All Cabling, Connectors, Junction Boxes, Mounting Hardware, And All Other Accessories Necessary For All Operation Of The System/equipment, Where Applicable. Vendor Must Certify That All Products Quoted Must Be In Current Production And Publicly Available As Of The Date Of This Tender. Unproven Future Products Shall Not Be Accepted. All Desired Features Listed Must Be In Current Production, Installed And In Use At The Time Of Quote/bid. Any And All Software Necessary To Technically Support The System Shall Be Included. Any And All Components Not Manufactured By The Vendor/primary Manufacturer Shall Be Listed As Such With Name/address/contact Information Of The Manufacturer Supplied. Devices Must Meet All Currently Applicable Safely Standards, Local And International Where Applicable. Vendor Shall Confirm And Certify In Writing That Parts And Labor Will Be Available For The Quoted System For Not Less Than Five (5) Years After The Warranty Period. Vendor Shall Agree To Provide Factory Or Principal Manufacturers, Trainings And/or Certification For At Least One (1) In-house Biomedical Technologist Or Engineer And End User. Vendor May Include Post-warranty Comprehensive Calibration And Preventive Maintenance Program Proposal For The Next 3-4 Years And Must Also Indicate Cost Estimates For Major Spare Part/s Vendor May Include Post-warranty Comprehensive Calibration And Preventive Maintenance Program Proposal For The Next 3-4 Years And Must Also Indicate Cost Estimates For All Spare Part/s Vendor To Shoulder Any Expenses Related To Delivery, Installation, Commissioning, Permit/s. Training And Other Sundries Necessary For The Complete Installation Of The Vendor Must Have Available Technical Staff And/or Office/s Within The Region Principal’s/ Manufacturer’s Products Must Have Been Present In The Local Market For The Past Ten (10) Progress Billing And Payment May Be Availed B The Winning Bidder As Follows, Otherwise, Full Payment Is Due At The Completion Of The Project And Requirements: 15% Upon Delivery At Site; 30% Upon Complete Installation, And 55% Upon Completion Of Project And/or Acceptance Of End-user. Completion Period For Delivery Must Not Exceed 120 Calendar Days And Succeeding Installation Must Not Exceed 120 Calendar Days. Any Deviation From This Limit Requires Prior Approval By The Head Of The Procuring Entity (hope) And Only Applies During Extenuating Circumstances. .<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>. Item: 3 Unit: Lot Qty: 1 Unit Cost: 5,355,000.00 Total Cost: 5,355,000.00 Description: Supply, Delivery, Installation, Testing & Commissioning Of Various Laboratory Equipment Biological Refrigerator (single Door) High Performance Refrigerator That Can Store Various Biological Products Storage Volume Of At Least 25.2 Cu Ft. (390l) Cabinet Type, Upright Single Clear Glass Door Should Have At Least 7 Shelves (adjustable) Hydrocarbon Compressor And Refrigerant That Should Not Contain Fluorine Or Chlorine Variable Frequency Compressor With Optimized Cooling System Temperature Range Should Be At 2⁰ To 8⁰c Has Precise Temperature Control System Large Space And Superior Uniformity With Temperature Uniformity Of At Least ± 3⁰c Forced Air Cooling Type Self-closing Door Capable Of At Least 90⁰ Stay Open Feature With Security Lock Has Optimized System And Noise Reduction Design To Reduce Noise Level To About 43db(a) 220~240/50/60 Power Supply (v/hz), 3.5a, 700/850w Microprocessor Electronic Controller System And Led Display Stable Performance And Should Have Multiple Functional Alarm Modes: Light, Sound And Remote; And With Six Alarm Types: High/low Temperature, Remote System, Power Failure, Sensor Error, Low Battery And Door Ajar Accessories Must Include The Following: Caster, Foot, Porthole, Usb Interface And Printer For Temperature Monitoring Certified Ul And Ce Standards Biological Refrigerator (double Door) High Performance Refrigerator That Can Store Various Biological Products Storage Volume Of At Least 31.4 Cu Ft. (890l) Cabinet Type, Upright Heated Double Pane Glass Door That Will Allow A Clear Display Of Stored Products Without Condensation At At Least 32⁰c And 85% Relative Humidity Condition Should Have At Least 12 Shelves (adjustable) Hydrocarbon Compressor And Refrigerant That Should Not Contain Fluorine Or Chlorine Variable Frequency Compressor With Optimized Cooling System Temperature Range Should Be At 2⁰ To 8⁰c Forced Air Cooling Type Automatic Defrost Mode Capable Self-closing Door Capable Of At Least 90⁰ Stay Open Feature Has Optimized System And Noise Reduction Design To Reduce Noise Level 220~240/50/60 Power Supply (v/hz), 3.5a, 700/850w Microprocessor Electronic Controller And Led Display Stable Performance And Should Have Multiple Functional Alarm Modes: Light, Sound And Remote; And With Six Alarm Types: High/low Temperature, Remote System, Power Failure, Sensor Error, Low Battery And Door Ajar Accessories Must Include The Following: Caster, Foot, Porthole, Usb Interface And Printer For Temperature Monitoring Certified To Ul And Ce Standards Biological Refrigerator (single Door, Mini Refrigerator ) High Performance Refrigerator That Can Store Various Biological Products Storage Volume Of At Least 2.4 Cu Ft. (68l) Cabinet Type, Upright Single Clear Glass Door Should Have At Least 2 Shelves And 1 Drawer (adjustable) Hydrocarbon Compressor And Refrigerant That Should Not Contain Fluorine Or Chlorine Variable Frequency Compressor With Optimized Cooling System Temperature Range Should Be At 2⁰ To 8⁰c Forced Air Cooling Type Lockable Design Has Optimized System And Noise Reduction Design To Reduce Noise Level 220~240/50/60 Power Supply (v/hz), 3.5a, 700/850w Microprocessor Electronic Controller And Led Display Stable Performance And Should Have Multiple Functional Alarm Modes: Light, Sound And Remote; And With Six Alarm Types: High/low Temperature, Remote System, Power Failure, Sensor Error, Low Battery And Door Ajar Accessories Must Include The Following: Caster, Foot, Porthole, Usb Interface And Printer For Temperature Monitoring Certified To Ul And Ce Standards Combined Refrigerator And Freezer High Performance Refrigerator That Can Store Various Biological Products Storage Volume Of At Least 6.5 Cu Ft. (185l) For Refrigerator; At Least 3.4 Cu Ft. (97l) For Freezer Cabinet Type, Upright For Both, With Single Clear Glass Door For Refrigerator Should Have At Least 3 Shelves And 1 Drawer For Refrigerator; 1 Shelf And 2 Drawers For Freezer Hydrocarbon Compressor And Refrigerant That Should Not Contain Fluorine Or Chlorine Has Two Frequency Conversion Compressor Variable Frequency Compressor With Optimized Cooling System Capable Of Automatic Defrost Mode For Refrigerator And Manual Defrosting For Freezer Temperature Range Should Be At 2⁰ To 8⁰c For Refrigerator; -10⁰ To -40⁰c For Freezer Forced Air Cooling Type For Refrigeration; Direct Cooling For Freezer Highly Precise Refrigerator Room Display For At Least 0.1⁰c Has Independent Control Panel Display For Refrigerator Section And Freezer Section Self-closing Door Capable Of At Least 90⁰ Stay Open Feature Has Optimized System And Noise Reduction Design To Reduce Noise Level 220~240/50/60 Power Supply (v/hz), 3.5a, 700/850w Microprocessor Electronic Controller And Led Display Stable Performance And Should Have Multiple Functional Alarm: High/low Temperature, Remote System, Power Failure, Sensor Error, Low Battery, Door Ajar And High Ambient Temperature Accessories Must Include The Following: Caster, Foot, Porthole, Usb Interface And Printer For Temperature Monitoring Certified To Ce And/or Ul Standards Biomedical Freezer (plasma Freezer) High Performance Refrigerator That Can Store Various Biological Products Storage Volume Of At Least 9.3 Cu Ft. (262l) Cabinet Type, Upright Single Door Should Have At Least 7 Drawers Hydrocarbon, Cfc-free Refrigerant Variable Frequency Compressor With Optimized Cooling System Temperature Range Should Be At -20⁰ To -40⁰c Direct Air Cooling Type Capable Of Manual Defrosting Low Energy Consumption Has Optimized System And Noise Reduction Design To Reduce Noise Level 220~240/50/60 Power Supply (v/hz), 3.5a, 700/850w Microprocessor Electronic Controller And Lcd Digital Temperature Display With At Least 0.1⁰c Precision Has A Standard Access Porthole For About 25mm Inside Diameter Stable Performance And Should Have Multiple Functional Alarms: High/low Temperature, Power Failure, Remote System, Sensor Error, Low Battery, Door Ajar, High Ambient, Dirty Condenser And Remote Alarm Accessories Must Include The Following: Caster, Foot, Porthole, Usb Interface And Printer For Temperature Monitoring Certified To Ce Standards Blood Bank Refrigerator (double Door) High Performance Refrigerator That Can Store Various Biological Products Storage Volume Of At Least 48.3 Cu Ft. (1369l) Drawer Type, Upright Heated Double Glass Door That Will Allow A Clear Display Of Stored Products Without Condensation At At Least 32⁰c And 85% Relative Humidity Condition Should Have At Least 12 Drawers Capable Of Providing Optimal Temperature For The Storage Of Blood Products At 2⁰c To 6⁰c Range Hydrocarbon Compressor And Refrigerant That Should Not Contain Fluorine Or Chlorine For A Stable And Reliable, Environmentally Safe Operation; The Refrigeration System Is Powered With A High-quality, Energy-efficient Inverter Compressor And Variable Speed Fan Motors. Temperature Control Responds Quickly And Reliably For A More Uniform Temperature Using Less Power And Lower Noise. Forced Air Cooling Type With Dual Control System Of High-precision Sensors And Mechanical Thermostat To Ensure That The Temperature Is Within Range Capable Of Monitoring Internal Temperature In Real-time, Records Historical Data And Alerts Abnormal Temprature Conditions Should Have A Built-in Battery That Can Continue To Support The Alarm System When There Is A Loss Of Power Supply 220~240/50/60 Power Supply (v/hz), 2.0a, 400w Power Microprocessor Electronic Controller And Lcd Touch Screen Digital Temperature Display That Can Show Temperature Graph, Working Status, Events And Alarm Record Stable Performance And Should Have Multiple Functional Alarms: High/low Temperature, Power Failure, Door Ajar, Sensor Failure, And Low Battery Standard Alarm Features Should Be A Sound Buzzer, Light Flashing, And Remote Contact Accessories Must Include The Following: Caster, Foot, Porthole, Usb Interface And Printer For Temperature Monitoring Certified To Ul And Ce Standards Platelet Agitator With Incubator High Performance Agitator With Incubator That Can Store And Ensure Platelet Viability Cabinet Type, Upright Double Transparent Insulation Glass Door Should Have At Least 10 Drawers Temperature Range Should Be At 20⁰ To 24⁰c Has High Efficiency Refrigeration System, Finned Evaporator, Fast Cooling Speed And Uniformity In Temperature Inside Intelligent Control For Refrigerating And Heating According To Ambient And Inner Temprature Cfc-free Refrigerant Forced Air Cooling Type Can Swing Constantly From Left To Right With No Shaking Or Crushing Around, Horizontal Oscillation Frequency Should Be At Least 60 ±5 Times Per Minute. Oscillation Amplitude Of At Least 50 Mm Can Store At Least 20 Blood Bags Has Uv For Disinfection And Is Capable Of Freely Setting The Disinfection Time 220~240/50/60 Power Supply (v/hz), 280w Microprocessor Control With Increment At 1⁰c And Has Led Digital Temperature Display Stable Performance And Should Have Multiple Functional Alarms: High/low Temperature, Remote System, Power Failure, Sensor Error, Low Battery, Door Ajar Accessories Must Include The Following: Door Lock, Caster, Test Hole And Light Certified To Iso 9001 And Ce Standards Vertical Autoclave Fully Automatic Autoclave Capacity Should Be At Least 80 Liters Chamber Material Must Be Made Up Of Sus 304 Minimum Power Supply And Requirement Of 4600w , 220v, 32a 50/60/hz Capable To At Least 5 To 45⁰c Working Environment With Relative Humidity Of 10% To 85% 0.1⁰c Temperature Accuracy Sterilization Temperature Should Reach 105 To 135⁰c For 1 To 6000 Minutes And Melting Temp At 60-100⁰c Warming Temperature Should Reach 45 To 60⁰c For 1 To 6000 Minutes Drying Temperature Of 80⁰c To 140⁰c For 1 To 300 Minutes Maximum Working Pressure Of At Least 0.25 Mpa And Design Pressure Of At Least 0.3 Mpa Multilayered Pressure Protection System Has At Least 2 Stainless Steel Basket Microcomputer Controlled System With Big Lcd Screen For Easy Display Safety Features That Includes The Following: Self-induction Pressure Interlocking Device, Over Temperature Protection, Dry Scorch Protection System, Lid Closing Checking, Leakage Device Protection, Over Pressure Protection, Safety Valve, Over Current And Short Circuit Protection Certified To Ce And Or Ul Standards Particulars Vendor Shall Warrant That The Product Supplied Shall Meet The Published Specifications. Vendor Shall Provide No Less Than Five (5) Years Warranty On Each Of The Equipment For Spare Parts And Service Upon Acceptance By End User/s. Vendor Agrees To Provide Free Of Charge All Parts And Labour Necessary To Repair Each Of The Equipent Purchased During The Period Covered By The Warranty And Replacement Of Any Item/s And/or Part/s Found To Be Defective In Material Or Workmanship Under Normal Use. Equipment Shall Be Delivered Complete With All Cabling, Connectors, And All Other Accessories Necessary For Full Operation Of The Equipment, Where Applicable. Vendor Must Certify That All Products Quoted Must Be In Current Production And Publicly Available As Of The Date Of This Tender. Unproven Future Products Shall Not Be Accepted. All Desired Features Listed Must Be In Current Production, Installed And In Use At The Time Of Quote/bid. Conducts Bi-annnual Preventive Maintenance Program And Provide Preventive Maintenance Report And Corresponding Stickers Attached To The Unit Within The Warranty Period Vendor Must Conduct Annual Calibration Program And Provide Calibration Certificate And Corresponding Stickers Attached To The Unit Within The Warranty Period. Vendor Must Respond With Technical Support Staff, Either Remotely Or In-person Where Applicable, Within At Least Twenty-four (24) Hours Upon Notification Of End-user; Must Perform Corrective Maintenance Within A Maximum Of Fourteen (14) Days Upon Notification Of End-user; Equipment Must Meet All Currently Applicable Safety Standards, Local And International Where Applicable. Vendor May Include Post-warranty Comprehensive Preventive Maintenance Program Proposal For The Next 3-4 Years And Must Also Indicate Cost Estimated For Major Spare Part/s. Any And All Components Not Manufactured By The Vendor/primary Manufacturer Shall Be Listed As Such With Name/address/contact Information Of The Manufacturer Supplied. Vendor Shall Provide Automatic Voltage Regulator (avr) And Uninterrupted Power Supply (ups) To Back Up The System On Each Equipment Purchased. Equipment Shall Be Delivered With At Least Two (2) Copy Of All Service Manuals And At Least Two (2) Copy Of All User Manuals. Certification From The Manufacturer That The Units Are Brand New And Not With Any Issues Or Defect. Vendor Shall Confirm And Certify In Writing That Parts And Labor Will Be Available For The Quoted Equipment For Not Less Than Five (5) Years After The Warranty Period. Vendor Shall Provide Comprehensive Training Of Users In Operation, Basic And Advance Maintenance Shall Be Provided With Certificates, Vendor Shall Agree To Provide Factory Or Principal Manufacturer Training And/or Certification For At Least Two (2) In-house Biomedical Technician Or Engineer And/or End User. Principal's/manufacturer's Product Portfolio Must Have Been Present In The Local Market For The Past Ten (10) Years. Equipment Must Be Manufactured By A Known And Reputable Company With Certificate Of Iso 9001:2015 And Iso 13485:2016 Or Its Equivalent. Inclusions Of The Following Items: At Least Two (2) Units 5 Liter Water Bath And At Least One (1) Unit Dry Bath. Progress Billing And Payment May Be Availed By The Winning Bidder As Follows, Otherwise, Full Payment Is Due At The Completion Of The Project And Requirements: 15% Upon Delivery At Site; 30% Upon Complete Installation, And 55% Upon Completion Of Project And/or Acceptance Of End-user. Completion Period For Delivery Must Not Exceed 120 Calendar Days And Succeeding Installation Must Not Exceed 120 Calendar Days. Any Deviation From This Limit Requires Prior Approval By The Head Of The Procuring Entity (hope) And Only Applies During Extenuating Circumstances. .<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>. Item: 4 Unit: Lot Qty: 1 Unit Cost: 20,000,000.00 Total Cost: 20,000,000.00 Description: Thoracic Multidisciplinary Tower, Surgery 4k Monitor Camera System - Modular Camera Platform Camera System - Link Module For 4k And 4k/3d Camera Head Plastic Container For Camera Head Light Cable Light Source Footswitch Pedal Insufflator Insufflation Tubing Set Gas Filter Co2 High Pressure Hose Documentation System Usb Adaptor For Connection To Ccu Equipment Cart Monitor Swivel Arm Video-assisted Thoracoscopic Surgery Instruments Set Telescope Invisible Near-infrared (nir) / Fluorescence Imaging With Indocyanine Green (icg) 30° Tray For Cleaning Hd Monitor Connecting Cable For Videolaryngoscope Reusable Macintosh/curved Video Laryngoscope Blades #3 Reusable Difficult Blades For Adult Flexible Intubation Video Endoscope For Adult, Disposable Stand For Monitor Video Assisted Thoracic Multidisciplinary Surgical Tower, 1 Unit 4k Monitor, 1 Pc Supports 4k Via Displayport, 12g-sdi, And Hdmi 2.0 Inputs Backward Compatible With Hd Signals Screen Size: Must Be At Least 32 Inches Front Glass Must Be Optically Bonded, Ar Coated, Chemically Strengthened Glass Camera System, 1 Pc Modular Camera Platform That Combines Various Technologies Like Rigid, Flexible, 3d Endoscopy, 4k And Can Be Adapted With Invisible Near Infrared / Indocyanine Green (nir/icg) For Fluorescence Imaging. High-resolution Camera System For Universal Use 4k Resolution And Modern Image Processing Technology Connection Possibility For Use With Up To 3 Link Modules Link Module For 4k And 4k/3d Line Frequency Should Be At Least 50/60 Hz Camera Head, 1 Pc With 2 Freely Programmable Camera Head Buttons Focus Adjustable Via Focus Ring Image Sensor: 2 X 1/2.5″ Complementary Metal-oxide Semiconductor (cmos) Chip. Should Be Soakable Plastic Container For Camera Head, 1 Pc Autoclavable Suitable For Use With Steam, Gas, And Hydrogen Peroxide Sterilization, Sterilization Compatible External Dimensions (wxdxh): At Least 385mm X 255mm X 75 Mm Light Cable, 1 Pc At Least 250 Cm (l) And Ø4.8 Mm , For Use With Icg Application Disinfection Can Be Done Through Low Temperature Or Soaking Straight Light Source, 1 Pc Average Led Lamp Life Of At Least 30,000 Hours Standby Button With Memory Function Lamp Type: Two High-performance Leds, White Light Led And Near Infrared Led Footswitch Pedal, 1 Pc With Button For Switchover Function Cable Length At Least 500 Cm Insufflator, 1 Pc 2 Modes Ready: High Flow Mode And Pediatric Mode Dimension (w X D X H) : At Least 305mm X 164mm X 315mm With External Co2 Warmer At Least 7” Touchscreen Displays Precise Monitoring With Inclusions: Connecting Cable, Length 100 Cm (1pc), Universal Wrench (1pc) Insufflation Tubing Set, 1 Pc Reusable, Sterilisable, Heatable, At Least 2.65 M (length), For Use With Insufflation Unit, Max Flow: 50l/min Gas Filter, 1 Pc With Iso Connectors, Hydrophobic On Both Sides, For Single Use, Sterile, Pack Of At Least 25, For Use With Insufflation Units With Max. Gas Flow Of 50 L/min, Disposable Co2 High Pressure Hose, 1 Pc American Connection/iso-connection, At Least 102 Cm (length) Documentation System, 1 Pc Control Via Smartscreen With Dicom Connection Full Hd, 4k, And 3d Capture Internal Memory: At Least 2 Tb Usb Adaptor For Connection To Ccu Equipment Cart, 1 Pc Narrow, Tall, Rides On 4 Antistatic Dual Wheels Equipped With Locking Brakes Energy Beam With Integrated Electrical Sub Distributors With At Least 12 Sockets Equipment Cart (w X H X D) : At Least 660mm X 1474mm X 730mm Shelf (w X H X D): At Least 450mm X 25mm X 510mm Consisting Of: Base Module, Cover, Beam Package, Shelf, Drawer Unit With Lock, Equipment Rail, Camera Holder, Mains Cord, Length 100 Cm Monitor Swivel Arm, 1 Pc Height And Side Adjustable, Can Be Mounted On The Left Or On The Right Side Loading Capacity Max: 15 Kg, With Monitor Mount Video Electronics Standards Association (vesa) 75/100 Video-assisted Thoracoscopic Surgery (vats) Instruments Cannula, Suction, Video-assisted Thoracoscopic Surgery (vats), With Control, 1pc Scissors, Tc, Acc. Metzenbaum, 1pc Forceps, Slider-shaft, Cobra Dissector, 1pc Forceps, Slider-shaft, Acc. Foerster, 1pc Forceps, Slider-shaft, Lymph Nodes, 1pc Forceps, Slider-shaft, Acc. Harken, 1pc Scissors, Slider-shaft, Acc. Metzenbaum, 1pc Holder, Needle, Slider-shaft, Tc, 1pc Pusher, Knot, Tube Shaft, 1pc Container For Video-assisted Thoracoscopic Surgery (vats) Instruments , Sterilization Tray, Sterilization, Plugin Profile, 1pc Tray, Sterilization, Plugin Profile, 1pc Basket, Sterilization, Tray 1/1, 1pc Elastic Strap, 1pc Telescope For Icg Telescope Invisible Near-infrared (nir) Fluorescence Imaging With Indocyanine Green (icg) 30° Forward-oblique Telescope, Enlarged View, At Least 10mm (d) And 31 Cm (l), Autoclavable For Indocyanine Green, Fiber Optic Light Transmission Incorporated, 1 Pc Tray, For Cleaning, Sterilization And Storage Of Rigid Endoscope And One Light Cable, Including Holder For Adaptors, Silicone Telescope Holders And Lid, 1 Pc Airway Management Hd Monitor, 2 Units With At Least 8" Touch Screen Operation Minimum Image Resolution: 1920 X 1200 Pixel Capable Of Two Camera Inputs Compatible With Other Components Such As Flexible Intubation Video Endoscopes (single Use And Reusable) Retromolar Intubation Endoscope, Rigid Intubation Endoscope With Deflectable Tip, Video Laryngoscope Blades Components Such As Previous Version Of Video Laryngoscope Blades Are Compatible Capable Of Picture-in-picture And Side-by-side Modes Data Transfer From Sd Card To Usb Flash Drive Possible With Usb Port For Easy Data Backup With Hdmi Output For Connecting An External Monitor With Real Time Video And Image Capturing In At Least 16 Gb Sd Card Capable Of Audio Recording With Integrated Microphone With Automatic Video Recording Once Blade Or Video Unit Is Connected With Timer For Documenting Intubation Time Capable Video Clip Playback And Still Images Must Be Splash-proof According To At Least Ip54, Suitable For Wipe Disinfection Made Of Shock-resistant Abs Plastic Housing With Built In Rechargeable Li-ion Batteries Power Supply 110 - 240 Vac, 50/60 Hz Connecting Cable For Video Laryngoscope, With Length Of At Least 200 Cm, 2 Pcs Reusable Macintosh / Curved Video Laryngoscope Blades #3, 1 Pc Complementary Metal-oxide Semiconductor (cmos) Technology Light Alloy Design , Robust And Light Plug And Play Interface With Button On Blade For Documentation Of Images And Video Sequences Integrated Camera And Led Light Reusable Difficult Blades For Adult, 2 Pcs Complementary Metal-oxide Semiconductor (cmos) Technology Light Alloy Design Plug And Play Interface With Button On Blade For Documentation Of Images And Video Sequences Integrated Camera And Led Light With Port/catheter Introduction Size Of 16-18 Fr. Includes Guide Rod Made Of Stainless Steel With Atraumatic Tip For Use With Video Laryngoscopes, 1 Pack Includes Protection Cap For Cleaning And Disinfection, 1 Pc Flexible Intubation Video Endoscope For Adult, Disposable (single Use), 6pcs/pack, 1 Pack Direct Connection To Monitor Complementary Metal-oxide Semiconductor (cmos) Technology Clear, Pixel Free Images With Integrated Led Light Source Distal Tip Outer Diameter At Least 5.5 Mm Working Channel Inner Diameter: At Least 2.1 Mm Deflection Up/down: At Least 140°/140° Angle Of View: At Least 100° Working Length: At Least 65 Cm Must Have Tube Fixation With Suction Valve Stand Monitor, 2 Units Height Of At Least 1340 Cm Rollable With At Least Five Legs And Antistatic Castors Crossbar At Least Length 250 Mm X Diameter 25 Mm For Positioning The Monitor Storage Tray Dimensions (w X D X H): At Least 300 Mm X 200 Mm X 150 Mm With Blade Holder Set And Cable Winder Particulars Vendor Shall Warrant That The Product Supplied Shall Meet The Published Specifications. Minimum Of Five (5) Year/s For Spare Parts & Service Upon Acceptance By End-user Vendor Must Repair Or Replace Any Item And/or Part/s Of The Equipment Found To Be Defective In Material Or In Workmanship Under Normal Use, Provided That The Equipment Is In Good Working Condition Thereafter, Within The Warranty Period Conduct Free Preventive Maintenance At Least Semi-annually Or According To Manufacturer's Recommendation/s Within Warranty Period. Corrective Maintenance Within A Maximum Of Fourteen (14) Days Upon Notification From End-user; Technical Support Staff Response Time Within At Least Two (2) Hours Via Remote Access Or Maximum Of Twenty-four (24) Hours Either Via Physical Presence On Site. Equipment Down-time Within Warranty Period Due To Inherent Defect/s And/or Fault/s Shall Be Added To The Total Warranty Period Availability Of Support Staff Within Visayas Delivery, Installation, Commissioning, Permit/s, Training And Other Related Expenses Incurred Will Be Shouldered By Winning Bidder, Where Applicable Vendor Must Provide Intensive Operational Or Application Training With Certification/s For End-user/s And Intensive Technical Training For Maintenance/biomedical Staff. Must Certify The Availability Of Spare Parts For The Next Five (5) Years Vendor Must Have Existing/active Quality Management System Certification E.g. Iso Certification 13485:2016 And Its Equivalent For Importation, Warehousing, Installation & Servicing Of Active And Non-active Medical Services. Equipment Shall Be Delivered With At Least Two (2) Copies Of User Manuals. Vendor Must Certify That All Products Quoted Must Be In Current Production And Publicly Available As Of The Date Of This Tender. Unproven Future Products Shall Not Be Accepted. All Desired Features Listed Must Be In Current Production For At Least 2 Years, Installed And In Use At The Time Of Quote/bid Principal’s / Manufacturer’s Products Must Have Been Present In The Local Market For The Past Ten (10) Years Any And All Components Not Manufactured By The Vendor/primary Manufacturer Shall Be Listed As Such With Name/address/contact Information Of The Manufacturer Supplied Vendor Shall Confirm And Certify In Writing That Parts And Labor Will Be Available For The Quoted System For Not Less Than Five (5) Years After The Warranty Period Vendor To Shoulder Any Expenses Related To Delivery, Installation, Commissioning, Permit/s, Training And Other Sundries Necessary For The Complete Installation Of The Equipment Vendor Shall Agree To Provide Factory Or Principal Manufacturer Training And/or Certification For At Least One (1) In-house Biomedical Technologist Or Engineer And/or Other End User. Progress Billing And Payment May Be Availed By The Winning Bidder As Follows, Otherwise, Full Payment Is Due At The Completion Of The Project And Requirements: 15% Upon Delivery At Site; 30% Upon Complete Installation, And 55% Upon Completion Of Project And/or Acceptance Of End-user. Completion Period For Delivery Must Not Exceed 120 Calendar Days And Succeeding Installation Must Not Exceed 120 Calendar Days. Any Deviation From This Limit Requires Prior Approval By The Head Of The Procuring Entity (hope) And Only Applies During Extenuating Circumstances. .<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.<>.