Government Service Insurance System Tender

Description 1. Project Title Supply, Fabrication And Installation Of Digital Business Center For Two Modules With Backdrop For The Gsis Cagayan De Oro Branch Office. 2. Total Budget The Total Budget For The Project Amounts To Php 334,955.00. Said Budget Is Included In The Corporate Budget For Cy 2024. 3. Brief Discussion Why The Goods And Services To Be Procured Are Necessary Gsis Digital Business Center Is A Modern Facility And Digital Platform Designed To Provide An Excellent Customer Experience Within Their Area. 4. Scope Of The Project The Project Includes The Supply, Fabrication And Installation Of Gsis Digital Business Center For Two Module With Backdrop With Supply And Installation Of Lighted Logo In Accordance With The Plans/drawings And Technical Specification. 5. Detailed Specifications Of The Items, Materials, Equipment/hardware/software, Accessories And/or Services To Be Procured: 5.1. All Material To Be Used Shall Be Free From Defect. All Lumber And Plywood Shall Be Free From Any Form Of Decay Or Insect Infestation. 5.2. No Piece Containing Cup, Warp Or Twist Shall Be Used. 5.3. Set Carpentry Work To Required Levels And Lines, With Members Plumb And True To The Line And Cut And Fitted. 5.4. Materials To Be Used, Fabrication And Installation Shall Have Prior Approval From The Authorized Representative Of Gsis. All Materials And Equipment Installed Without Prior Approval Of Gsis Shall Bear The Risk Of Rejection And Required Immediate Rectification Of The Works Using The Gsis Approved Materials. 5.5. Duco Finish Is Achieved Using High-quality Lacquer Paints And Sanding Techniques To Produce A Smooth, Glossy Surface. Below Is A General Step-by-step Procedure For Achieving A Duco Finish: 5.5.1. Surface Preparation Clean The Surface: Start By Thoroughly Cleaning The Surface To Remove Any Dirt, Dust, Grease, Or Old Paint. Degreaser Or Thinner For This Step Can Be Used. Sanding: Sand The Surface Using 120-grit Sandpaper To Smooth Out Any Rough Areas. If There Are Holes Or Dents, Apply Putty Or Filler, Allow It To Dry, And Sand Again Until The Surface Is Even. Final Sanding: Use 220-grit Sandpaper To Achieve A Smoother Surface Before Applying The Primer. 5.5.2. Apply Primer Mix The Primer: If Using A Spray Gun, Mix The Lacquer Primer With A Lacquer Thinner According To The Recommended Ratio. If Using An Aerosol Spray, Shake The Can Well Before Use. Spray The Primer: Apply The Primer In Thin, Even Coats To The Surface. Maintain A Consistent Distance Of Around 6-8 Inches From The Surface. Dry And Sand: Let The Primer Dry For About 30 Minutes To 1 Hour, Depending On Environmental Conditions. Once Dry, Sand The Surface With 600-grit Sandpaper To Smooth Out Any Imperfections. Wipe The Surface: Use A Clean, Dry Tack Cloth To Remove Any Dust After Sanding. 5.5.3. Apply Lacquer Paint Mix The Paint: If Using A Spray Gun, Mix The Lacquer Paint With Lacquer Thinner According To The Recommended Ratio. For An Aerosol Spray Can, Shake It For At Least 2-3 Minutes. First Coat: Spray The Lacquer Paint In Light, Even Coats, Maintaining The Same Distance As With The Primer. Keep The Nozzle Moving To Avoid Over-spraying Any One Area. Dry And Sand: Let The Paint Dry For About 15-30 Minutes Between Coats. After Each Coat, Sand Lightly With 400-grit Sandpaper. Apply Additional Coats: Repeat The Process, Applying 2-3 Coats Of Lacquer Paint Until The Desired Depth Of Color And Smoothness Is Achieved. After The Final Coat, Allow The Paint To Cure For At Least 24 Hours. 5.5.4. Wet Sanding Wet Sanding: Once The Lacquer Paint Has Cured, Use 600-grit Wet Sandpaper And Water To Sand The Surface. Wet Sanding Helps Smooth Out Any Remaining Uneven Areas And Creates A Finer Surface. Final Sanding: For A High-gloss Finish, You Can Use 1000-grit Or Finer Sandpaper For The Last Round Of Wet Sanding. 5.5.5. Polishing Polishing Compound: After Wet Sanding, Apply A Polishing Compound With A Soft Cloth. Use Circular Motions To Buff The Surface, Gradually Increasing The Shine. Wipe Clean: After Polishing, Wipe Down The Surface With A Clean Cloth To Remove Any Residue, Revealing The Glossy, Smooth Duco Finish. 5.5.6. Clear Coat Clear Lacquer Coat: For Added Protection And More Gloss, Apply A Clear Lacquer Topcoat. Apply It In The Same Manner As The Paint, Followed By Sanding And Polishing To Enhance The Finish. Please See Attached Gsis Technical Specifications