Fabrication Tenders

Details: Description Section I. Invitation To Bid Da8-goods-2025-02 (pr No. Bt-25-goods-consol-39879-0004) 1. The Department Of Agriculture-regional Field Office No. 8, Through The Multiple Fund Intends To Apply The Sum Of Nine Million One Hundred Thirty Thousand Pesos (p9,130,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For “supply And Delivery Of Agricultural Equipment” Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Department Of Agriculture-regional Field Office No. 8, Undertakes The Bidding Of This Procurement Project As “short-of-award.” Hence, The Notice Of Award To The Winning Bidder Shall Be Issued After Enactment By The Congress Of The General Appropriation Act (gaa) For 2025. 3. The Department Of Agriculture-regional Field Office No. 8, Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within Per Lot (terms And Conditions). Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. Qty Uom Item Description Unit Cost Total Cost Lot 1: 2 Number Recirculating Dryer 2,950,000.00 5,900,000.00 Technical Specifications: 1. Type: Recirculating Batch Type 2. Total Maximum Height: 7.2 M 3. Product Quality A. Cracked Grain, % Increase: 3%, Max B. Head Rice, % Decrease: 5% Maximum C. Hulled/damaged Grain % Increase:2% Maximum 4. Drying System A. Holding Capacity: 6 Tons Wet Palay @ 24% Moisture Content, Minimum B. Moisture Gradient: 2%, Maximum C. Drying Efficiency: 75%, Minimum D. Drying Rate: 1% /hr, Maximum E. Drying Loss/spillage: 1%, Maximum F. With Compatible Electric Motor For Drying System G. Vertical Rectangular Bin- Consist Of Rectangular Vertically Installed Drying Chamber H. With Control Panel I. With Mimic Flow Of Operation J. With Basic Electrical Meter Such As Ammeter And Voltmeter Display 5. With Basic Safety Cut-off Features: A. Emergency Shutdown Button B. With On-off Pilot Lights Switch Button And Indicating Operating Motor, Each Component With Motor Should Have Individual Circuit Breaker C. With Magnetic Starter With Overload D. With Interlocking System And Emergency Button 6. Construction: Stainless Steel-astm 304 For Following Parts Such As: A. Drying Bin Wall/cover B. Discharge Chute C. Elevator Casing D. Bottom Boot Section Of The Elevator E. Drying Chamber: Perforated Screen For Non-lsu Type Or Inverted V-duct For Lsu Type F. Auger G. Auger Casing H. Receiving Hopper 7. Mounting Frame A. Steel Angular Bar (50mmx50mmx6mm, Minimum) B. Mounting Frame Shall Be Fitted With Brackets For Contrete Floor Installation 8. With The Following Components: A. Heating System 1 I. Petroleum Based Fuel: Direct Fired Ii. Heating System Efficiency: 90%, Minimum Iii. With Following Accessories:  Flame Sensor  Electronic Ignition System  Automatic Fuel Shut-off  Adjustable Fuel Vaporizer  Automatic Temperature Control  Temperature Monitoring System  Galvanized Fuel Container Made Of Non-corrosive And Heat-resistant Material At 200 Liters Capacity, Minimum  Compatible Electric Motor For The Heating System B. Heating System 2 I. Biomass Fuel: Indirect-fired Ii. Heating System Efficiency: 50%, Minimum Iii. Can Provide The Required Heating Temperature Or Can Provide 70°c Drying Temperature Iv. Heat Exchanger: Made Of Fire Tubes V. Burning Chamber: Made Of Refractory Bricks  With Automatic Fuel Feeder: Auger/air Blown/plunger Type (provided That The Feeder Is Not Directly Exposed To The Burning Fuel) Vi. With The Following Accessories:  With Temperature Control  With Compatible Electric Motor Vii. Burning Efficiency Of Biomass Furnace: 95%, Minimum  With Compatible Electric Motor C. With Provision Of Ducting To Divert Heat Source From Heating System 1 Or Heating System 2 I. Made Of Stainless Steel Or Primer Painted And Powder Coated B.i Or G.i Sheet D. Dust Collection System Consist Of Cyclone Separator/collector And Suction Blower. All Ducting Shall Be Fabricated From Sheet Metal And The Connectors Must Be Airtight. 9. With Following Accessories: A. Generator Set I. Capacity: Compatible To The Drying System, Able To Provide Sufficient Continuous And Peak Power Requirements Of The Drying System Ii. Voltage Requirement Compatible To The System Iii. Power Supply/generating System Should Be Brand New Iv. Provided With Mechanical Transfer Switch (mts) V. The Electrical Wire, Wire Accessories, And Piping To Connect The Power Generating Unit To The Mts And The Dryer Control Panel/system Shall Be Provided By The Bidder Vi. With The Thermal Insulation And Noise Suppressor B. Portable Handheld Moisture Meter I. Grain: Paddy, Rice, And Other Grains (optional) Ii. Type: Capacitance Iii. Moisture Range:12-25% Or Wider Iv. Accuracy: ≠0.5% Or Better V. Lcd/led Display Vi. Battery Operated Vii. Automatic Density And Temperature Compensation Viii. Product Brochure With Technical Specifications In English C. Standard Heavy Duty Tools: Made Of Tempered Steel And Chrome Vanadium I. One (1) Set Socket Wrench (no. 8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,27,30,32, Minimum) Ii. One (1) Set Combination Wrench (open And Box, 10 Pcs-size Appropriate To The Drying System) Iii. Electrical Plier, 200mm, Minimum Iv. Screwdriver: Philips And Flat Head, 300mm,minimum V. Grease Gun, 250mm Cylinder Length, Minimum Vi. Mechanical Pliers, 200mm, Minimum Vii. Heavy Duty Toolbox And Roll Up Tools Holder  Size That Could Accommodate The List Of Tools D. Vacuum Cleaner With Air Blower I. Rated Input Power:1,000 W, Minimum Ii. Vacuum Cord: 5m, Minimum E. Basic Safety Kits F. Personal Protective Equipment  Dust Mask  Safety Goggle  Ear Muff/ear Plug G. One (1) Unit Fire Extinguisher H. Dry Chemical, Stored Pressure Type, 6.80 Kg, Minimum I. Automatic Portable Bag/sack Closer/sewer 10. With Compatible Biomass Furnace 11. With Compatible Transformer 12. Provide Reflectorized And Waterproof Da-rice Logo (12" X 12") Lot 2: 2 Number Walk Behind Transplanter 400,000.00 800,000.00 Technical Specifications: 1. 4 Stroke Gasoline Engine At 4 Hp, Minimum 2. Number Of Planting Rows: 4 Rows, Minimum 3. Row Spacing: 30 Cm 4. Hill Spacing: 12-21cm, Adjustable 5. Field Efficiency: 80%, Minimum 6. Percent Damaged Hills And Percent Missing Hills: 10%, Maximum 7. Noise Emitted: 92db, Maximum 8. With Low Bed Trailer 9. With Manually Operated Seed Sowing Machine With Valid Amtec Test Report 10. With Compatible Seedling Tray: 500 Pcs, Minimum A. Dimension: 60cm X 30cm X 3.5cm (length X Width X Thickness) B. Hole Aperture: 1-1.5mm 11. Holder And Accessories Required For Maintenance With Full Dealer Optional Parts 12. With Original Equipment Manufacturers Manual Written In English. 13. With The Following Standard Heavy Duty Tools And Accessories: A. Open Wrench Set B. Adjustable Wrench (12") C. Grease Gun D. Philips And Flat Screw Driver E. Roll Up Tools Holder F. Provide Personalized/ Fitted Material (water Resistant) For Covering G. With Personal Protective Equipment (minimum Of 3 Sets Each) I. Dust Mask Ii. Earmuff Iii. Eye Protection (safety Goggles) Iv. Hand Gloves H. Provide With Engine Driven Power Sprayer/ Pressure Washer Automatic Type I. .provide With Extra 2 Liters Engine Oil 14. Provide Reflectorized And Water Resistant Da-rice And Da-noap Logo (4" X 4") 15. Conform To Paes/pabes 151:2015 16. With Engrave Nameplate Containing Atleast The Chasis And Engine Number Lot 3: 1 Number Float-assist Type Walking Type Tractor (floating Tiller) 130,000.00 130,000.00 Technical Specifications: 1. Type: Mudboat 2. Rated Power: Minimum Of 10 Hp Diesel Engine, Aircooled 3. Fuel Consumption: Maximum Of 2.5li/hr 4. Continuous Power: 85% Of Rated Power, Minimum 5. Peak Transmission: 80%, Minimum 6. Total Cutting Width: 1.0 Meter Minimum 7. Noise Emitted: 95 Db, Maximum 8. Complete With Throttle Lever And Clutch Lever On The Handle Bar 9. The Unit Should Be Painted Finish, With Rust-proofing Primer And Final Paint Color 10. With The Following Standard Heavy Duty Tools And Accesories: A. Open Wrench Set B. Adjustable Wrench (12") C. Grease Gun D. Philips And Flat Screw Driver E. Roll Up Tools Holder F. Provide Personalized/ Fitted Material (water Resistant) For Covering G. With Personal Protective Equipment (minimum Of 3 Sets Each) I. Dust Mask Ii. Earmuff Iii. Eye Protection (safety Goggles) Iv. Hand Gloves H. Provide With Engine Driven Power Sprayer/ Pressure Washer Automatic Type I. Provide With Extra 2 Liters Engine Oil 11. Provide Reflectorized And Water Resistant Da-rice Logo (4" X 4") 12. Conform To Paes/pabes 347:2022 13. With Engrave Nameplate Containing Atleast The Chasis And Engine Number Lot 4 2 Number Rice Mill (single Pass) 1,150,000.00 2,300,000.00 Technical Specifications: 1. Rubber Roll Dehuller 2. Input Capacity: Minimum Of 0.5 Ton/hr At 98% Purity 3. Hulling Efficiency: 75% Minimum 4. Prime Mover: 23 Hp Diesel Engine (minimum), Watercooled With Brand New Battery (atleast 3sm) 5. Milling Recovery Index: 0.98 Min. 6. Percent Head Rice Index: 0.90 Min. 7. With Protection For All Moving Parts 8. With Pre-cleaner A. Input Capacity: Should Be Compatible With The Hulling Capacity Of The Units To Be Supplied (375kg/hr Minimum) 9. With Trailer A. Steel Made Channel Reinforced By Steel Angular Bars B. Leaf Spring Suspension System C. With Brand New Tires (pneumatic) D. With Reflectorized Slow Moving Vehicle Emblem 10. With Bucket Elevator A. Material: Plastic 11. With The Following Standard Heavy Duty Tools And Accessories: A. One (1) Unit Weighing Scale With 500kg Capacity Minimum B. One (1) Piece Calibrated Grain Moisture Monitoring Device (portable Handheld Moisture Meter) J. Grain: Paddy And Rice Ii. Type: Capacitance Iii. User’s Manual In English C. With Fire Extinguisher For Fire Caused By Flammable Liquids I .class B Ii. Six (6) Liters Capacity D. Open Wrench Set E. Adjustable Wrench (12") F. Grease Gun G. Philips And Flat Screw Driver H. Roll Up Tools Holder I. Provide Personalized/ Fitted Material (water Resistant) For Covering J. With Personal Protective Equipment (minimum Of 3 Sets Each) I. Dust Mask Ii. Earmuff Iii. Eye Protection (safety Goggles) Iv. Hand Gloves K. Provide With Electric Driven Power Sprayer/ Pressure Washer Automatic Type L. Provide With Electric Blower That Has Minimum Of 700w Rated Input Power M. Provide With Extra 2 Liters Engine Oil 12. Provide Operation Equipment Manual 13. Provide Reflectorized And Water Resistant Da-rice Logo (6" X 6") 14. With Engrave Nameplate Containing Atleast The Chasis And Engine Number Terms And Conditions: A During The Opening Of Bids, Bidders Shall Submit: 1 Certificate Of Accredited Service Center Within The Region That Could Respond Within 72 Hours (including Holidays And Weekends) Upon Request Of The End-user/beneficiary; 2 Namdac Certificate Of Accreditation; 3 Section Vii (technical Specifications) Of Bidding Document, Which Must Be Signed And Sealed By Licensed Agricultural Engineer/agricultural Biosystems Engineer; 4 Valid Amtec Test Report: I. Recirculating Dryer With A Similar Drying System Conform To The Pns.paes 201:2015 Standard For Moisture Gradient, Drying Rate, Product Quality, Drying Loss/spillage, Drying Efficiency, And Heating System Efficiency. Should Be Provided With Separate Amtec Test Report For Both Heating System. Ii. Engine Iii. Float-assist Type Walking Type Tractor (floating Tiller) Coupled With The Offered Engine Iv. Mechanical Rice Transplanter (walk-behind) Coupled With The Offered Engine V. Rice Mill (single Pass) Coupled With The Offered Engine 5 Warranty Certificate For Services, Parts, And Other Components Due To Manufacturing Defects Upon Acceptance With Minimum Of Two (2) Years For Lot 1 Only; 6 Warranty Certificate For The Machinery And Equipment Being Offerred For Lot 2, 3, & 4 Only: A. Minimum Of 1 Year For Engine From Date Of Acceptance B. Minimum Of 1 Year On Parts And Services From Date Of Acceptance. 7 Valid Certificate Of Dealership/distributorship/authority To Sell; 8 Certification Guaranteed Spare Parts Availability For At Least Five (5) Years For Lot 1 Only; 9 Permit To Operate (pto) From Bafe; B During Post-qualification, The Bidder Shall Submit: 1 Provide Certification Of Very Satisfactory Performance Of The Recirculating Dryer Being Offered As To: I) Machinery Performance; Ii) Machinery Durability And; Iii) Availability Of Parts And Service, Issued By Any Government Or Private Company Agency/company In Asian Countries, Excluding Da-rfo8, Duly Signed By The Current Head Of Agency/company Within The Last One (1) Year. The Bidder Shall Provide List Of Five (5) Customer/clients With Addresses And Contact Numbers, And Certification From At Least One (1) Customer/client Issued By Any Government For Lot 1 Only; 2 Manufacturer's Distributor's Or Bidder's Certification That The Proposed Grain Dryer Brand Has Been In The Market For The Last 5 Years, Accompanied Or Duly Supported By Documentary Proof. The Documentary Proof Must Be Verifiable Through Phone Call, Ocular Inspection Or Both, Covering The Period Beginning From 2019 Or Erlier And Maybe Any Or A Combination Of The Following (for Lot 1 Only): A. Record Of Sales B. Dealership Or Servicing Agreements Indicating The Brand Subject Thereof C. Manufacturer's Or Distributor's Certification Of Market Presence, Indicating The Name/s And Address/es Of The Dealers D. Bill Of Lading And/or Other Similar Records Indicating Shipment Or Delivery Of The Grain Dryer Brand To The Philippines E. Client's Affidavit Indicating Client's Complete Address And Telephone Number, Brand, Type, And Model Of Grain Dryer, Date Of Purchase And Duly Supported By Physical Proof Of Grain Dryer 3 Copy Of Equipment Manufacturer's Manual (in English) For Lot 1 Only: A. Recirculating Dryer Unit And Each Component Such As Drying Unit, Drying System, Generator Set, And Portable Handheld Moisture Meter Written In English/filipino 4 Certificate Of Conformity From Bafe I. Recirculating Dryer Ii. Mechanical Rice Transplanter (walk-behind) Iii. Float-assist Type Walking Type Tractor (floating Tiller) Iv. Rice Mill (single Pass) C Winning Bidder/s Shall: 1 Deliver And Install Genuine, Unaltered, And Brand New Units; 2 Conduct Formal Training, After Complete Delivery And Installation Of The Items, For The Operation And Maintenance Of The Equipment To At Least Two (2) Operators And Provide Copies Of The Training Module Written In English/filipino; 3 Deliver And Install (if Necessary) The Units To The Intended Recipients As Indicated In The Attached List Of Delivery Points Upon Receipt Of Ntp. Lot 1: Within 60 Calendar Days Lot 2: Within 30 Calendar Days Lot 3: Within 20 Calendar Days Lot 4: Within 60 Calendar Days 4 Shoulder The Delivery And Handling Cost To The Specified Drop-off Point, Materials For Testing, Fuels, And Other Necessary Requirements. 5 Inform The End-user And General Services Section (gss) Seven (7) Calendar Days Prior To The Schedule Of Delivery; 6 Non-stainless Material Should Be Painted With Rust-proofing Primer And Final Paint Color For Lot 1 Only D Any Delay Of Delivery Of Item Shall Be Subjected To Liquidated Damges Equivalent To 1/10 Of 1% Of The Contract Price Per Day Of Delay Of The Undelivered Items; E Payment Scheme: A. 100% Payment Shall Be Made Upon Complete Delivery, Inspection, Amtec System Testing (test Report With Acceptable Rating), After The Conduct Of Training In The Operation And Maintenance Of The Machineries And Equipment; And Acceptance Per Lot F Winning Bidder/s Shall Submit A Snapshot Of Business Bank Account (preferably Landbank) To Effect Payment. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. Bidding Is Open To All Interested Bidders, Whether Local Or Foreign, Subject To The Conditions For Eligibility Provided In The Irr Of Ra 9184. 5. Prospective Bidders May Obtain Further Information From Department Of Agriculture – Regional Field Office 8 And Inspect The Bidding Documents At The Address Given Below During Office Hours From 8:00am To 5:00 Pm. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 09 To December 03, 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee, Pursuant To The Latest Guidelines Issued By The Gppb. The Cost Of The Bidding Documents Shall Correspond To The Total Abc Of The Selected Lot/s On Which The Supplier Intends To Bid, With A Range As Indicated In The Table Below. Approved Budget For The Contract Maximum Cost Of Bidding Documents (in Philippine Peso) 500,000 And Below 500.00 More Than 500,000 Up To 1 Million 1,000.00 More Than 1 Million Up To 5 Million 5,000.00 More Than 5 Million Up To 10 Million 10,000.00 7. The Department Of Agriculture-rfo 8 Will Hold A Pre-bid Conference On November 19, 2024, 9:00 Am (bac-secretariat Time) At Da8 Bac Office, 4th Floor Green Bldg., Kanhuraw Hill, Tacloban City And Through Face To Face Or Video Conferencing Or Webcasting Via Google Meet, Which Shall Be Open To Prospective Bidders. 8. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before December 03, 2024, 9:00 Am (bac-secretariat Time). Late Bids Shall Not Be Accepted. 9. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 10. Bid Opening Shall Be On December 03, 2024, 9:00 Am (bac-secretariat Time) At Da8 Bac Office, 4th Floor Green Bldg., Kanhuraw Hill, Tacloban City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend Either Physically Or Through Video Conferencing Via Google Meet. 11. The Department Of Agriculture-rfo 8 Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. Da Does Not Condone Any Form Of Solicitation On Any Prospective Winning And Losing Bidders By Any Of Our Staff/employees Or Any Other Party. Any Sort Of This Kind Shall Be Reported Immediately To The Office Of The Secretary Or The National Bureau Of Investigation (nbi) For Entrapment And Proper Investigation. 13. For Further Information, Please Refer To: Martins A. Alde Head, Bac-secretariat Department Of Agriculture, Regional Field Office-8 Kanhuraw Hill, Tacloban City Darfo8.bacsec@gmail.com Mobile No. 09061694318 Easternvisayas.da.gov.ph 14. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.philgeps.gov.ph Or Easternvisayas.da.gov.ph Approved By: (sgd.) Larry U. Sultan, Jd Chairman, Bids And Awards Committee

Details: Description Procurement Of Supply, Delivery, Installation, And Commissioning Of Processing Equipment Under Bangsamoro Assistance For Grassroots Innovation (bagi) - Tdif 2023 Ben. #1 Supply, Delivery And Installation Of Processing Equipment Of Charcoal Briquetting Process Of Sabaken Maguyaga Fishermen Cooperative Place Of Delivery: Brgy. Sabaken Northern Kabuntalan, Maguindanao Del Norte 1 .) Charcoal Crusher Machine = 1 Pc Specifications: Power Supply: Single-phase (220v, 50hz) Motor Power: 2.2kw – 3.5kw (high-torque Electric Motor) Crushing Capacity: 300 – 500 Kg/h (depending On Charcoal Hardness And Moisture Content) Rotor Speed: 1,500 – 2,000 Rpm Feed Inlet Size: 300mm X 200mm Crushing Mechanism: Charcoal (lump Charcoal, Briquettes), Coal, And Biomass (optional) Hopper Capacity: 50 – 100 Kg Per Batch Machine Dimensions: Approx. 1200mm (l) X 800mm (w) X 1100mm (h) Construction Material: Frame: Heavy-duty Steel Frame Blades/hammers: Hardened Steel For Durability Screens: Replaceable Stainless Steel Or Carbon Steel Mesh Discharge System: Gravity-based Or Optional Conveyor For Continuous Discharge Cooling System: Air-cooled Motor With Thermal Protection Safety Features: Emergency Stop Button Protective Covers Over Moving Parts Safety Lock On The Hopper Lid Lubrication: Manual Grease Lubrication For Bearings And Other Moving Parts Dust Control: Optional Dust Collection System Or Enclosed Design To Minimize Dust Dispersion Control System: On/off Switch With Overload Protection Adjustable Speed Control (optional For Certain Models) Operating Temperature: 5°c – 40°c Mobility: Equipped With Durable Wheels Or Skid Base For Easy Movement Accessories Included: Spare Blades/hammers Set Of Replacement Screens With Different Mesh Sizes Basic Toolkit For Maintenance Maintenance Requirements: Regular Lubrication And Periodic Blade Sharpening Or Replacement Power Cable Length: 5 Meters (with Waterproof Plug) Warranty: 1-year Warranty On Parts And Labor 2.) Charcoal Briquette Machine = 1 Pc Specifications: Power Supply: Single-phase (220v, 50hz) Motor Power: 2.2kw – 3kw (high-torque Electric Motor For Heavy-duty Operation) Briquetting Capacity: 150 – 300 Kg/h (depending On Feed Material And Moisture Content) Briquette Size: Diameter: 50mm – 70mm (customizable) Length: Adjustable (40mm – 100mm) Biomass Materials (optional) Feed Inlet Size: 300mm X 200mm Hopper Capacity: 50 – 100 Kg Binding Material: Optional Binder Feed System (for Starch Or Clay Binders) Moisture Content Requirement: 8% – 12% For Optimal Briquette Formation Heating System: Optional Pre-heating For Better Briquette Cohesion Output Shape: Cylindrical, Hexagonal, Or Square (based On Mold Type) Construction Material: Frame: Heavy-duty Steel Construction Compression Chamber: Hardened Steel For Durability Operating Pressure: 30 – 60 Mpa (adjustable For Different Materials) Cooling System: Air-cooled Motor With Thermal Overload Protection Discharge System: Manual Or Automatic Conveyor Discharge (optional) Lubrication: Manual Grease Lubrication For Bearings And Compression System Control System: On/off Switch With Overload Protection Emergency Stop Button Machine Dimensions: Approx. 1500mm (l) X 1000mm (w) X 1200mm (h) Safety Features: Protective Covers Over Moving Parts Emergency Stop Button Overload Protection Mobility: Equipped With Durable Wheels Or Skid Base For Ease Of Movement Dust Control: Optional Dust Collection System Or Enclosed Feed System Accessories Included: Set Of Molds For Different Briquette Shapes And Sizes Maintenance Toolkit Operating Manual Maintenance Requirements: Regular Lubrication And Periodic Mold Inspection And Replacement Power Cable Length: 5 Meters (with Waterproof Plug) Warranty: 1-year Warranty On Parts And Labor 3.) Charcoal Mixer = 1 Pc Specifications: Power Source: Diesel Engine Engine Power: 10 Hp Mixing Capacity: 200 – 500 Kg/h (depending On Material Type And Moisture Content) Mixing Type: Horizontal Or Vertical Ribbon Mixer Mixing Chamber Volume: 200 Liters Material Compatibility: Charcoal Powder Charcoal Dust Biomass Materials (e.g., Wood Shavings, Sawdust) Binder Additives (if Applicable) Feed Inlet Size: 150mm X 150mm (with Safety Cover) Discharge Outlet Size: 100mm X 100mm (manual Or Pneumatic Discharge Options) Mixing Speed: 30 – 50 Rpm (fixed Speed) Construction Material: Frame: Heavy-duty Carbon Steel Or Stainless Steel Mixing Blades: Hardened Steel For Long-lasting Durability Fuel Tank Capacity: 3.5 – 5 Liters (diesel Fuel) Fuel Consumption: 0.8 – 1.5 Liters Per Hour (depending On Load And Engine Type) Cooling System: Air-cooled Diesel Engine Safety Features: Emergency Stop Button Protective Guards Over Moving Parts Engine Overload Protection Machine Dimensions: Approx. 1400mm (l) X 900mm (w) X 1200mm (h) Mobility: Equipped With Heavy-duty Wheels Or Skid Base For Easy Movement Included Accessories: Basic Maintenance Toolkit Operating Manual Spare Mixing Blades (optional) Control System: On/off Switch For Engine Control Throttle Control For Engine Speed Adjustment Maintenance Requirements: Regular Lubrication And Cleaning Of Mixing Components Diesel Engine Maintenance (oil Change, Filter Cleaning) Operating Temperature: 5°c – 40°c Warranty: 1-year Warranty On Parts And Labor 4.) Fabricated Solar Dryer House = 1 Pc Specifications: Drying Area: 20 M² Can Be Customized Based On Available Space And Drying Capacity. Structure Frame: Material: Galvanized Steel Or Aluminum Alloy Frame Frame Dimensions: Approx. 3m (w) X 6m (l) X 2.5m (h) For A 20 M² House Corrosion-resistant Material For Outdoor Durability. Covering Material: Uv-stabilized Polyethylene Or Polycarbonate Plastic Sheeting Thickness: 200 Microns – 300 Microns Lifespan: 3 – 5 Years (depending On Maintenance) Light Transmittance: 80% – 90% (for Optimal Drying Efficiency) Ventilation System: Adjustable Air Vents Or Windows On Sidewalls And Roof For Airflow Control. Optional Exhaust Fans (solar-powered) For Better Air Circulation. Flooring: Raised Mesh Or Perforated Flooring For Air Circulation Underneath Drying Materials Material: Food-grade Stainless Steel Or Heavy-duty Plastic. Optional: Concrete Flooring With Drainage System. Shelving: Multi-layer Drying Racks (3 To 5 Layers, Adjustable) Frame: Stainless Steel Or Galvanized Metal Mesh: Uv-resistant Plastic Or Food-grade Stainless Steel Shelving Space Per Layer: 1.5m X 6m (adjustable). Entry/exit: Sliding Or Hinged Doors With Uv Plastic Covering Optional Lockable Doors For Security Temperature Control: Natural Solar Heating (temperature Up To 50°c – 70°c Inside The Dryer) Optional Thermostat For Monitoring Temperature Levels. Moisture Control: Adjustable Air Vents To Control Humidity Levels. Optional Hygrometer For Humidity Measurement. Rain Protection: Sloped Roof Design For Rainwater Runoff. Sealed Edges To Prevent Water Seepage. Wind Resistance: Windproof Design, Capable Of Withstanding Wind Speeds Up To 80 Km/h. Capacity: Suitable For Drying Fruits, Vegetables, Seaweed, Fish, Spices, And Herbs. Approx. 100 – 500 Kg Of Materials Per Batch (depending On House Size And Product Type). Installation: Modular Design For Easy Assembly And Disassembly. Includes Assembly Manual And Required Hardware. Maintenance: Uv Plastic Requires Periodic Cleaning To Remove Dust And Debris. Frame And Ventilation System Should Be Inspected Regularly. Accessories Included: Solar-powered Exhaust Fans (optional). Digital Thermometer And Hygrometer (optional). Extra Uv Plastic Sheeting For Future Replacements. Operating Temperature: 5°c – 45°c (ambient Temperature Range For Optimal Operation). Weight: Approx. 100 – 300 Kg (depending On Size And Materials Used). Lifespan: Uv Plastic Cover Expected To Last 3 – 5 Years; Frame Expected To Last 10 – 15 Years With Proper Maintenance. Warranty: 1-year Warranty On Structure And Uv Plastic Covering. ----------------nothing Follows------------------ Ben. #2 Supply, Delivery And Installation Of Processing Equipment Of Livestock Feeds Production Of Igabay Coconut Farmers Organization Place Of Delivery: Brgy. Igabay, Balabagan, Lanao Del Sur 1.) Heavy-duty Hammer Mill Machine = 1 Pc Specifications: Power Source: Diesel Engine Engine Power: 15hp – 20hp (diesel-powered, Air-cooled) Fuel Consumption: 1.5 – 2.5 Liters Per Hour (depending On Material And Load) Production Capacity: 400 – 500 Kg/h (depending On Material Type And Moisture Content) Rotor Speed: 1,800 – 2,500 Rpm Hammer Type: Grain (corn, Wheat, Sorghum, Etc.) Biomass (wood Chips, Agricultural Waste) Stalks And Straw Dry Grasses And Forage Various Other Materials For Processing Screen Size Options: Multiple Screen Sizes (2mm – 10mm) For Different Output Particle Sizes Feed Inlet Size: Approx. 300mm X 200mm (customizable Based On Material Size) Machine Dimensions: Approx. 1500mm (l) X 1000mm (w) X 1300mm (h) Material Of Construction: Frame: Stainless Steel Hammers: Hardened Steel Screens: Replaceable Mesh Screens Made Of Stainless Discharge System: Gravity-based Or Optional Conveyor Belt Discharge Safety Features: Emergency Stop Button Heavy-duty Guards For Moving Parts Vibration-dampening Mounts For Stable Operation Lubrication System: Manual Grease Points For Bearings And Other Moving Parts Mobility: Equipped With Durable Wheels Or Skid Base For Ease Of Transport Included Accessories: Set Of Replacement Hammers Set Of Screens (with Different Mesh Sizes) Basic Toolkit For Maintenance Warranty: 1-year Warranty On Parts And Labor 2.) Feeds Pellet Mill Machine = 1 Set Specifications: Power Source: Diesel Engine Engine Power: 15hp – 20hp (air-cooled Or Water-cooled) Fuel Consumption: 1.5 – 2.5 Liters Per Hour (depending On Load And Material) Production Capacity: 400 – 500 Kg/h (varies With Material Type And Pellet Size) Pellet Size: Adjustable From 2mm To 8mm (customizable Die Sizes) Die Type: Flat Die Or Ring Die (interchangeable Dies Available) Agricultural Waste Fish Meal And Other Feed Ingredients Hopper Capacity: 50 – 80 Kg Pelletizing Speed: 150 – 200 Rpm Feed Form: Dry Pellets Material Of Construction: Frame: Heavy-duty Steel Construction Rollers And Dies: Hardened Steel For Durability And Wear Resistance Discharge System: Gravity-based Or Optional Conveyor Pellet Length: Adjustable (via Cutting Knife At The Die) Machine Dimensions: Approx. 1600mm (l) X 900mm (w) X 1500mm (h) Cooling System: Air Or Water Cooling (to Prevent Overheating During Extended Use) Lubrication System: Manual Grease Lubrication For Bearings And Rollers Operating Temperature: 5°c – 40°c Safety Features: Emergency Stop Button Safety Guards On All Moving Parts Overload Protection Mobility: Mounted On Wheels Or Skid Base For Ease Of Transportation Included Accessories: Set Of Spare Dies (with Different Hole Sizes) Tool Kit For Basic Maintenance Operating Manual Fuel Tank Capacity: 10 – 15 Liters Pelletizing Efficiency: 90% – 95% Conversion Of Feedstock Into Pellets Warranty: 1-year Warranty On Parts And Labor 3.) Mixer Borrow Machine =1 Pc Specifications: Power Supply: Single-phase (220v, 50hz) Motor Power: 1.5kw – 2.2kw (high-torque Electric Motor) Mixing Capacity: 100 – 150 Liters (approximately 3 – 4 Bags Of Mortar Mix Per Batch) Drum Material: Heavy-duty Steel (rust-resistant Coating) Drum Capacity: 120 – 160 Liters (total Capacity, Including Mixing And Overspill) Drum Speed: 25 – 30 Rpm (optimal For Thorough Mortar Mixing) Concrete (light) Plaster Mixes Discharge System: Manual Tilting Mechanism For Easy Discharge Drum Tilt Range: 360° Tilting For Complete Emptying Machine Dimensions: Approx. 1200mm (l) X 800mm (w) X 1000mm (h) Weight: 80 – 120 Kg (depending On Model And Drum Size) Frame Construction: Heavy-duty Steel Frame For Durability Wheels: Pneumatic Or Solid Rubber Wheels For Easy Transport Across Job Sites Control System: On/off Switch With Thermal Overload Protection Emergency Stop Button Safety Features: Protective Cover For Motor And Moving Parts Safety Guards For Drum And Paddle Non-slip Base For Stability During Operation Lubrication: Sealed Bearings For Minimal Maintenance Operating Temperature: 5°c – 40°c Cable Length: 5 Meters (with Waterproof Plug) Mobility: Fitted With Handles For Manual Movement Included Accessories: Maintenance Toolkit Operating Manual Mixing Time: 3 – 5 Minutes Per Batch (depending On Material Consistency) Energy Efficiency: Low Power Consumption, Suitable For Continuous Operation Warranty: 1-year Warranty On Parts And Labor 4.) Siever Machine = 1 Pc Specifications: Power Supply: Single-phase (220v, 50hz) Motor Power: 0.75kw – 1.5kw (electric Motor With Variable Speed Control) Sieving Capacity: 300 – 500 Kg/h (depending On Material Type And Screen Size) Screen Type: Multiple-layer Vibrating Screens Stainless Steel Mesh (food-grade Or Standard Options Available) Fine Powders (flour, Starch, Etc.) Granular Materials (sand, Grains, Seeds) Dry Food Products Fertilizers Aggregates (cement, Construction Materials) Feeding System: Manual Or Automatic Feed Hopper With Adjustable Feed Rate Machine Dimensions: Approx. 1700mm (l) X 800mm (w) X 9000mm (h) Frame Construction: Heavy-duty Stainless Steel (rust-resistant, Suitable For Industrial Use) Control System: On/off Switch With Vibration Adjustment Thermal Overload Protection Vibration Mechanism: Eccentric Motor-driven Vibration System Operating Temperature: 5°c – 45°c Mobility: Fitted With Wheels Or Skid Base For Easy Movement Safety Features: Safety Guards On Moving Parts Emergency Stop Button Overload Protection Power Cable Length: 5 Meters (with Waterproof Plug) Included Accessories: Set Of Different Screen Meshes (with Various Sizes) Tool Kit For Maintenance And Screen Changes Warranty: 1-year Warranty On Parts And Labor ----------------nothing Follows------------------ Ben. #3 Supply, Delivery And Installation Of Processing Equipment Of Livestock Feeds Production Of Kauran Allience Farmers Marketing Cooperative Place Of Delivery Brgy. Kauran, Ampatuan, Maguindanao Del Sur 1.) Heavy-duty Hammer Mill Machine = 1 Pc Specifications: Power Source: Diesel Engine Engine Power: 15hp – 20hp (diesel-powered, Air-cooled) Fuel Consumption: 1.5 – 2.5 Liters Per Hour (depending On Material And Load) Production Capacity: 400 – 500 Kg/h (depending On Material Type And Moisture Content) Rotor Speed: 1,800 – 2,500 Rpm Hammer Type: Grain (corn, Wheat, Sorghum, Etc.) Biomass (wood Chips, Agricultural Waste) Stalks And Straw Dry Grasses And Forage Various Other Materials For Processing Screen Size Options: Multiple Screen Sizes (2mm – 10mm) For Different Output Particle Sizes Feed Inlet Size: Approx. 300mm X 200mm (customizable Based On Material Size) Machine Dimensions: Approx. 1500mm (l) X 1000mm (w) X 1300mm (h) Material Of Construction: Frame: Stainless Steel Hammers: Hardened Steel Screens: Replaceable Mesh Screens Made Of Stainless Discharge System: Gravity-based Or Optional Conveyor Belt Discharge Safety Features: Emergency Stop Button Heavy-duty Guards For Moving Parts Vibration-dampening Mounts For Stable Operation Lubrication System: Manual Grease Points For Bearings And Other Moving Parts Mobility: Equipped With Durable Wheels Or Skid Base For Ease Of Transport Included Accessories: Set Of Replacement Hammers Set Of Screens (with Different Mesh Sizes) Basic Toolkit For Maintenance Warranty: 1-year Warranty On Parts And Labor 2.) Feeds Pellet Mill Machine = 1 Set Specifications: Power Supply: Single-phase (220v, 50hz) Motor Power: 1.5kw – 2.2kw (high-torque Electric Motor) Mixing Capacity: 100 – 150 Liters (approximately 3 – 4 Bags Of Mortar Mix Per Batch) Drum Material: Heavy-duty Steel (rust-resistant Coating) Drum Capacity: 120 – 160 Liters (total Capacity, Including Mixing And Overspill) Drum Speed: 25 – 30 Rpm (optimal For Thorough Mortar Mixing) Concrete (light) Plaster Mixes Discharge System: Manual Tilting Mechanism For Easy Discharge Drum Tilt Range: 360° Tilting For Complete Emptying Machine Dimensions: Approx. 1200mm (l) X 800mm (w) X 1000mm (h) Weight: 80 – 120 Kg (depending On Model And Drum Size) Frame Construction: Heavy-duty Steel Frame For Durability Wheels: Pneumatic Or Solid Rubber Wheels For Easy Transport Across Job Sites Control System: On/off Switch With Thermal Overload Protection Emergency Stop Button Safety Features: Protective Cover For Motor And Moving Parts Safety Guards For Drum And Paddle Non-slip Base For Stability During Operation Lubrication: Sealed Bearings For Minimal Maintenance Operating Temperature: 5°c – 40°c Cable Length: 5 Meters (with Waterproof Plug) Mobility: Fitted With Handles For Manual Movement Included Accessories: Maintenance Toolkit Operating Manual Mixing Time: 3 – 5 Minutes Per Batch (depending On Material Consistency) Energy Efficiency: Low Power Consumption, Suitable For Continuous Operation Warranty: 1-year Warranty On Parts And Labor 3.) Mixer Borrow Machine = 1 Pc Specifications: Power Supply: Single-phase (220v, 50hz) Motor Power: 1.5kw – 2.2kw (high-torque Electric Motor) Mixing Capacity: 100 – 150 Liters (approximately 3 – 4 Bags Of Mortar Mix Per Batch) Drum Material: Heavy-duty Steel (rust-resistant Coating) Drum Capacity: 120 – 160 Liters (total Capacity, Including Mixing And Overspill) Drum Speed: 25 – 30 Rpm (optimal For Thorough Mortar Mixing) Concrete (light) Plaster Mixes Discharge System: Manual Tilting Mechanism For Easy Discharge Drum Tilt Range: 360° Tilting For Complete Emptying Machine Dimensions: Approx. 1200mm (l) X 800mm (w) X 1000mm (h) Weight: 80 – 120 Kg (depending On Model And Drum Size) Frame Construction: Heavy-duty Steel Frame For Durability Wheels: Pneumatic Or Solid Rubber Wheels For Easy Transport Across Job Sites Control System: On/off Switch With Thermal Overload Protection Emergency Stop Button Safety Features: Protective Cover For Motor And Moving Parts Safety Guards For Drum And Paddle Non-slip Base For Stability During Operation Lubrication: Sealed Bearings For Minimal Maintenance Operating Temperature: 5°c – 40°c Cable Length: 5 Meters (with Waterproof Plug) Mobility: Fitted With Handles For Manual Movement Included Accessories: Maintenance Toolkit Operating Manual Mixing Time: 3 – 5 Minutes Per Batch (depending On Material Consistency) Energy Efficiency: Low Power Consumption, Suitable For Continuous Operation Warranty: 1-year Warranty On Parts And Labor 4.) Siever Machine = 1 Pc Specifications: Power Supply: Single-phase (220v, 50hz) Motor Power: 0.75kw – 1.5kw (electric Motor With Variable Speed Control) Sieving Capacity: 300 – 500 Kg/h (depending On Material Type And Screen Size) Screen Type: Multiple-layer Vibrating Screens Stainless Steel Mesh (food-grade Or Standard Options Available) Fine Powders (flour, Starch, Etc.) Granular Materials (sand, Grains, Seeds) Dry Food Products Fertilizers Aggregates (cement, Construction Materials) Feeding System: Manual Or Automatic Feed Hopper With Adjustable Feed Rate Machine Dimensions: Approx. 1700mm (l) X 800mm (w) X 9000mm (h) Frame Construction: Heavy-duty Stainless Steel (rust-resistant, Suitable For Industrial Use) Control System: On/off Switch With Vibration Adjustment Thermal Overload Protection Vibration Mechanism: Eccentric Motor-driven Vibration System Operating Temperature: 5°c – 45°c Mobility: Fitted With Wheels Or Skid Base For Easy Movement Safety Features: Safety Guards On Moving Parts Emergency Stop Button Overload Protection Power Cable Length: 5 Meters (with Waterproof Plug) Included Accessories: Set Of Different Screen Meshes (with Various Sizes) Tool Kit For Maintenance And Screen Changes Warranty: 1-year Warranty On Parts And Labor ----------------nothing Follows------------------ Ben. #4 Supply, Delivery And Installation Processing Equipment Of Seaweeds Chips Of Abs-mhet Aquamarine Producer. Place Of Delivery Brgy. San Reymundo, Jolo, Sulu 1.) Electric Dough Sheeter Machine = 1 Pc Specifications: Power Supply: Single-phase (220v, 50hz) Motor Power: 1.5 Kw Rolling Width: 600 Mm Dough Thickness Adjustment: Adjustable From 0.5 Mm To 10 Mm Manual Or Automatic Thickness Adjustment System Frame: Heavy-duty Stainless Steel Or Painted Carbon Steel Rollers: Food-grade Stainless Steel For Easy Cleaning And Durability Dimensions: Approx. 1200 Mm (l) X 800 Mm (w) X 1100 Mm (h) Safety Features: Emergency Stop Button Safety Guards On Rollers Overload Protection Control System: On/off Switch With Overload Protection Variable Speed Control For Conveyor And Roller Speed Cleaning System: Easy Access For Cleaning Rollers And Conveyor Removable Parts For Thorough Cleaning Mobility: Equipped With Sturdy Wheels Or Skid Base For Easy Transport Power Cable Length: 5 Meters (with Waterproof Plug) Included Accessories: Maintenance Toolkit Operating Manual Operating Temperature: 5°c – 40°c Warranty: 1-year Warranty On Parts And Labor 2.) Seaweeds Grinder Machine = 1 Pc Specifications: Power Supply: Single-phase (220v, 50hz) Motor Power: 3 Kw (high-torque Electric Motor For Heavy-duty Operation) Grinding Capacity: 100 – 200 Kg/h (depending On Seaweed Type And Moisture Content) Grinding Mechanism: Hammer Mill Or Knife Mill Grinding System Adjustable Grinding Fineness (1 Mm To 5 Mm Particle Size) Other Plant Materials (optional) Screen Type: Removable Stainless Steel Screen For Varying Particle Sizes Cooling System: Air-cooled Motor With Thermal Overload Protection Discharge System: Gravity-based Discharge Or Optional Conveyor For Continuous Operation Construction Material: Frame: Heavy-duty Carbon Steel Or Stainless Steel Grinding Chamber: Corrosion-resistant Material Suitable For Marine Products Machine Dimensions: Approx. 1500 Mm (l) X 800 Mm (w) X 1200 Mm (h) Safety Features: Emergency Stop Button Protective Guards Over Moving Parts Overload Protection Control System: On/off Switch With Overload Protection Variable Speed Control (optional) Lubrication: Manual Grease Lubrication For Bearings And Grinding Components Mobility: Equipped With Sturdy Wheels For Easy Movement Power Cable Length: 5 Meters (with Waterproof Plug) Included Accessories: Spare Screens Of Different Mesh Sizes Maintenance Toolkit Operating Manual Cleaning System: Easy Access For Cleaning And Maintenance Dust Control: Optional Dust Extraction System Or Enclosed Design To Minimize Dust Dispersion Operating Temperature: 5°c – 40°c Warranty: 1-year Warranty On Parts And Labor 3.) Seaweeds Solar Dryer Machine = 1 Pc Specifications: Power Supply: 12v Dc (powered By Solar Panel And Battery System) Solar Panel: Type: Monocrystalline Or Polycrystalline Power Output: 100w – 200w Voltage: 12v Battery: Drying Method: Natural Convection Drying With Solar Heat Optional Fan-assisted Airflow For Improved Efficiency Drying Chamber Dimensions: Approx. 1200mm (l) X 800mm (w) X 800mm (h) Adjustable Shelving For Effective Drying 7 Layer Tray Rack Compatible To Drying Chamber Material Compatibility: Fresh Or Dried Seaweeds (e.g., Agar, Carrageenan) Other Plant Materials (optional) Construction Material: Frame: Heavy-duty Aluminum Or Stainless Steel Chamber: Uv-resistant Polycarbonate Or Insulated Metal Temperature Control: Thermostat With Temperature Gauge (up To 60°c) Adjustable Airflow Control For Optimal Drying Conditions Ventilation System: Adjustable Vents For Moisture Control Optional Exhaust Fan (12v Dc) For Enhanced Airflow Weight: Approx. 50 – 80 Kg (depending On Materials Used) Mobility: Equipped With Wheels Or A Skid Base For Easy Movement Included Accessories: Solar Panel Mounting Brackets Battery Charger And Controller Shelving Units For Drying Operating Manual Cleaning System: Easy Access For Cleaning The Drying Chamber Dust Control: Enclosed Design To Minimize Dust Ingress Warranty: 1-year Warranty On Parts And Labor ----------------nothing Follows------------------ Ben. #5 Supply, Delivery And Installation Of Processing Equipment Of Charcoal Briquetting Process Of Sabaken Maguyaga Fishermen Cooperative Place Of Delivery Brgy. Panosolen, Gen. Salipada K. Pendatun, Maguindanao Del Sur 1.) Charcoal Crusher Machine = 1 Pc Specifications: Power Supply: Single-phase (220v, 50hz) Motor Power: 2.2kw – 3.5kw (high-torque Electric Motor) Crushing Capacity: 300 – 500 Kg/h (depending On Charcoal Hardness And Moisture Content) Rotor Speed: 1,500 – 2,000 Rpm Feed Inlet Size: 300mm X 200mm Crushing Mechanism: Charcoal (lump Charcoal, Briquettes), Coal, And Biomass (optional) Hopper Capacity: 50 – 100 Kg Per Batch Machine Dimensions: Approx. 1200mm (l) X 800mm (w) X 1100mm (h) Construction Material: Frame: Heavy-duty Steel Frame Blades/hammers: Hardened Steel For Durability Screens: Replaceable Stainless Steel Or Carbon Steel Mesh Discharge System: Gravity-based Or Optional Conveyor For Continuous Discharge Cooling System: Air-cooled Motor With Thermal Protection Safety Features: Emergency Stop Button Protective Covers Over Moving Parts Safety Lock On The Hopper Lid Lubrication: Manual Grease Lubrication For Bearings And Other Moving Parts Dust Control: Optional Dust Collection System Or Enclosed Design To Minimize Dust Dispersion Control System: On/off Switch With Overload Protection Adjustable Speed Control (optional For Certain Models) Operating Temperature: 5°c – 40°c Mobility: Equipped With Durable Wheels Or Skid Base For Easy Movement Accessories Included: Spare Blades/hammers Set Of Replacement Screens With Different Mesh Sizes Basic Toolkit For Maintenance Maintenance Requirements: Regular Lubrication And Periodic Blade Sharpening Or Replacement Power Cable Length: 5 Meters (with Waterproof Plug) Warranty: 1-year Warranty On Parts And Labor 2.) Charcoal Briquette Machine = 1 Pc Specifications: Power Supply: Single-phase (220v, 50hz) Motor Power: 2.2kw – 3kw (high-torque Electric Motor For Heavy-duty Operation) Briquetting Capacity: 150 – 300 Kg/h (depending On Feed Material And Moisture Content) Briquette Size: Diameter: 50mm – 70mm (customizable) Length: Adjustable (40mm – 100mm) Biomass Materials (optional) Feed Inlet Size: 300mm X 200mm Hopper Capacity: 50 – 100 Kg Binding Material: Optional Binder Feed System (for Starch Or Clay Binders) Moisture Content Requirement: 8% – 12% For Optimal Briquette Formation Heating System: Optional Pre-heating For Better Briquette Cohesion Output Shape: Cylindrical, Hexagonal, Or Square (based On Mold Type) Construction Material: Frame: Heavy-duty Steel Construction Compression Chamber: Hardened Steel For Durability Operating Pressure: 30 – 60 Mpa (adjustable For Different Materials) Cooling System: Air-cooled Motor With Thermal Overload Protection Discharge System: Manual Or Automatic Conveyor Discharge (optional) Lubrication: Manual Grease Lubrication For Bearings And Compression System Control System: On/off Switch With Overload Protection Emergency Stop Button Machine Dimensions: Approx. 1500mm (l) X 1000mm (w) X 1200mm (h) Safety Features: Protective Covers Over Moving Parts Emergency Stop Button Overload Protection Mobility: Equipped With Durable Wheels Or Skid Base For Ease Of Movement Dust Control: Optional Dust Collection System Or Enclosed Feed System Accessories Included: Set Of Molds For Different Briquette Shapes And Sizes Maintenance Toolkit Operating Manual Maintenance Requirements: Regular Lubrication And Periodic Mold Inspection And Replacement Power Cable Length: 5 Meters (with Waterproof Plug) Warranty: 1-year Warranty On Parts And Labor 3.) Charcoal Mixer = 1 Pc Specifications: Power Source: Diesel Engine Engine Power: 10 Hp Mixing Capacity: 200 – 500 Kg/h (depending On Material Type And Moisture Content) Mixing Type: Horizontal Or Vertical Ribbon Mixer Mixing Chamber Volume: 200 Liters Material Compatibility: Charcoal Powder Charcoal Dust Biomass Materials (e.g., Wood Shavings, Sawdust) Binder Additives (if Applicable) Feed Inlet Size: 150mm X 150mm (with Safety Cover) Discharge Outlet Size: 100mm X 100mm (manual Or Pneumatic Discharge Options) Mixing Speed: 30 – 50 Rpm (fixed Speed) Construction Material: Frame: Heavy-duty Carbon Steel Or Stainless Steel Mixing Blades: Hardened Steel For Long-lasting Durability Fuel Tank Capacity: 3.5 – 5 Liters (diesel Fuel) Fuel Consumption: 0.8 – 1.5 Liters Per Hour (depending On Load And Engine Type) Cooling System: Air-cooled Diesel Engine Safety Features: Emergency Stop Button Protective Guards Over Moving Parts Engine Overload Protection Machine Dimensions: Approx. 1400mm (l) X 900mm (w) X 1200mm (h) Mobility: Equipped With Heavy-duty Wheels Or Skid Base For Easy Movement Included Accessories: Basic Maintenance Toolkit Operating Manual Spare Mixing Blades (optional) Control System: On/off Switch For Engine Control Throttle Control For Engine Speed Adjustment Maintenance Requirements: Regular Lubrication And Cleaning Of Mixing Components Diesel Engine Maintenance (oil Change, Filter Cleaning) Operating Temperature: 5°c – 40°c Warranty: 1-year Warranty On Parts And Labor 4.) Fabricated Solar Dryer House = 1 Pc Specifications: Drying Area: 20 M² Can Be Customized Based On Available Space And Drying Capacity. Structure Frame: Material: Galvanized Steel Or Aluminum Alloy Frame Frame Dimensions: Approx. 3m (w) X 6m (l) X 2.5m (h) For A 20 M² House Corrosion-resistant Material For Outdoor Durability. Covering Material: Uv-stabilized Polyethylene Or Polycarbonate Plastic Sheeting Thickness: 200 Microns – 300 Microns Lifespan: 3 – 5 Years (depending On Maintenance) Light Transmittance: 80% – 90% (for Optimal Drying Efficiency) Ventilation System: Adjustable Air Vents Or Windows On Sidewalls And Roof For Airflow Control. Optional Exhaust Fans (solar-powered) For Better Air Circulation. Flooring: Raised Mesh Or Perforated Flooring For Air Circulation Underneath Drying Materials Material: Food-grade Stainless Steel Or Heavy-duty Plastic. Optional: Concrete Flooring With Drainage System. Shelving: Multi-layer Drying Racks (3 To 5 Layers, Adjustable) Frame: Stainless Steel Or Galvanized Metal Mesh: Uv-resistant Plastic Or Food-grade Stainless Steel Shelving Space Per Layer: 1.5m X 6m (adjustable). Entry/exit: Sliding Or Hinged Doors With Uv Plastic Covering Optional Lockable Doors For Security Temperature Control: Natural Solar Heating (temperature Up To 50°c – 70°c Inside The Dryer) Optional Thermostat For Monitoring Temperature Levels. Moisture Control: Adjustable Air Vents To Control Humidity Levels. Optional Hygrometer For Humidity Measurement. Rain Protection: Sloped Roof Design For Rainwater Runoff. Sealed Edges To Prevent Water Seepage. Wind Resistance: Windproof Design, Capable Of Withstanding Wind Speeds Up To 80 Km/h. Capacity: Suitable For Drying Fruits, Vegetables, Seaweed, Fish, Spices, And Herbs. Approx. 100 – 500 Kg Of Materials Per Batch (depending On House Size And Product Type). Installation: Modular Design For Easy Assembly And Disassembly. Includes Assembly Manual And Required Hardware. Maintenance: Uv Plastic Requires Periodic Cleaning To Remove Dust And Debris. Frame And Ventilation System Should Be Inspected Regularly. Accessories Included: Solar-powered Exhaust Fans (optional). Digital Thermometer And Hygrometer (optional). Extra Uv Plastic Sheeting For Future Replacements. Operating Temperature: 5°c – 45°c (ambient Temperature Range For Optimal Operation). Weight: Approx. 100 – 300 Kg (depending On Size And Materials Used). Lifespan: Uv Plastic Cover Expected To Last 3 – 5 Years; Frame Expected To Last 10 – 15 Years With Proper Maintenance. Warranty: 1-year Warranty On Structure And Uv Plastic Covering. ----------------nothing Follows------------------ Ben. #6 Supply, Delivery And Installation Of Processing Equipment Of Fresh Water Fish Processing Of Bangsamoro Grassroot Anti-poverty Agriculture Cooperative Place Of Delivery Brgy. Lagunde Pikit, North Cotabato 1.) Production And Packaging Equipment = 1 Set Working Table = 1 Pc Table Dimensions: Length: 1500mm (1.5m) Width: 700mm (0.7m) Height: 850mm (standard Working Height) Material: Tabletop: Food-grade Stainless Steel (grade 304), Corrosion-resistant And Easy To Clean. Frame And Legs: Heavy-duty Stainless Steel Or Galvanized Steel For Durability And Stability. Undershelf: Optional Stainless Steel Shelf For Additional Storage. Surface Finish: Smooth, Non-porous, And Polished Surface To Prevent Bacteria Buildup And Ensure Easy Cleaning. Edge Corners Rounded For Safety And Cleanliness. Load Capacity: Capable Of Holding Up To 200 Kg Of Fish And Processing Tools. Stainless Steel Collander (double Ears) = 10 Pcs "material Type: High-quality Food-grade Stainless Steel (grade 304). Corrosion Resistance: Rust-proof And Corrosion-resistant, Suitable For Handling Fish And Other Seafood. Finish: Polished Or Brushed Stainless Steel For Easy Cleaning And Hygiene. Sizes: 2 Pcs Small: Diameter: 250mm (25cm), Depth: 120mm (12cm), Capacity: 4 Liters, Weight: 0.7 Kg 2 Pcs Medium: Diameter: 300mm (30cm), Depth: 150mm (15cm), Capacity: 7 Liters, Weight: 1 Kg 3 Pcs Large: Diameter: 350mm (35cm), Depth: 170mm (17cm), Capacity: 10 Liters, Weight: 1.3 Kg 3 Pcs Extra-large: Diameter: 400mm (40cm), Depth: 200mm (20cm), Capacity: 15 Liters, Weight: 1.8 Kg " Household Scales = 2 Pcs "capacity And Accuracy Maximum Capacity: 10 Kg (22 Lbs) Graduation/accuracy: 1 Gram (0.001 Kg) Weighing Units: Kg, G, Lb, Oz Type: Large Lcd Digital Display With Backlight For Clear Visibility. Screen Size: 50mm X 30mm (approximately) Display Features: Shows Weight, Low Battery, Overload Indicator, And Tare Function. Button Functions: Power, Tare, Unit Conversion. Power Source: 2 X Aaa Batteries Or Rechargeable Battery (depending On Model) And Ac Adapter Option For Continuous Use In Commercial Settings. Dimensions And Weight Overall Dimensions: 250mm (l) X 230mm (w) X 60mm (h) Weight: 1.2 Kg Compliance Food Safety: Compliant With Haccp Standards For Safe Use In Food Processing Environments. Calibration: Factory Calibrated And Can Be Re-calibrated As Needed " Measuring Cups And Spoon, Set = 2 Pcs "measuring Cups Specifications: Material: Food-grade Stainless Steel Or Bpa-free Plastic Sizes: 1 Cup, 1/2 Cup, 1/3 Cup, 1/4 Cup Measuring Spoons Specifications: Material: Food-grade Stainless Steel Or Bpa-free Plastic Sizes: 1 Tablespoon, 1/2 Tablespoon, 1 Teaspoon, 1/2 Teaspoon, 1/4 Teaspoon " Stainless Steel Knife Set = 2 Pcs Stainless Basin = 5 Pcs * Deep Stainless Steel Basin And Stainless Steel Basins Digital Weighing Scale = 2 Pcs "capacity: 10 Kg (22 Lbs) Accuracy: 1 Gram (0.001 Kg) Units: Kg, G, Lb, Oz Display: Large Lcd Digital Display With Backlight. Shows Weight, Low Battery, And Overload Indicators. Platform: Material: Food-grade Stainless Steel Size: 250mm X 250mm Power: Powered By 2 X Aaa Batteries Or Rechargeable Battery (optional Ac Adapter) Auto-off After 2 Minutes Of Inactivity " Utensils, Set (spatula, Paddle, Bowls,) = 3 Pcs Impluse Sealer = 2 Pcs "sealing Length: 300mm, Material: Durable Metal Housing, Corrosion-resistant And Heat-resistant Sealing Strip For Continuous Use Sealing Width: 2mm – 5mm (adjustable, Depending On Model) Heating Time: Adjustable (0.2 - 1.5 Seconds) For Various Bag Thicknesses Power Supply: Standard 220v, Single-phase Seal Types: Works With Pp, Pe, And Laminated Packaging Films Ideal For Sealing Plastic Bags Up To 0.2mm In Thickness Weight: Approximately 2–4 Kg, Depending On Model " Stainless Steel Knife = 4 Set "material: Blades: High-carbon Stainless Steel For Sharpness And Corrosion Resistance Handles: Ergonomic, Non-slip, And Easy-to-grip Polypropylene Or Stainless Steel Handles Knife Types (common In Fish Processing): Fillet Knife: Flexible Blade, 6-8 Inches, For Precise Filleting Boning Knife: 5-6 Inches, Stiff Blade For Deboning Chef’s Knife: 8 Inches, Multipurpose For Cutting, Slicing Utility Knife: 4-6 Inches, For Smaller Tasks And Trimming Cleaver: Heavy-duty, Ideal For Cutting Through Bones (optional In Some Sets)" Tray Rack,24 Trays Cap = 1 Pc "material: Stainless Steel Or Aluminum For Durability And Corrosion Resistance, Ideal For Food Processing Environments. Capacity: Holds Up To 24 Trays (compatible With Standard Trays Approximately 18"" X 26""). Dimensions: Overall Size: Approx. 180 Cm (h) X 60 Cm (w) X 50 Cm (d)" Soaking, S/s, 20l Cap, With Strainer = 10 Set "material: Stainless Steel (s/s) For Durability, Rust Resistance, And Easy Cleaning. Food-grade Material Safe For Direct Food Contact. Capacity: 20 Liters (suitable For Soaking Larger Batches Of Fish Or Other Food Items). Bowl Diameter: Approx. 35 Cm Height: Approx. 25 Cm" Stainless Mixing Bowl (different Sizes) = 10 Set "material: High-quality Stainless Steel For Durability, Rust Resistance, And Easy Maintenance. Food-grade, Safe For All Food Preparation Tasks. Sizes: Small: 1.5 Liters Medium: 3 Liters Large: 5 Liters Extra Large: 7 Liters" Stainless Steel Double Handle Frying Pan = 10 Set "material: Stainless Steel For Durability, Even Heat Distribution, And Rust Resistance. Food-grade, Suitable For High-heat Cooking. Size: Diameter: Available In Various Sizes, Commonly 30 Cm To 40 Cm. Depth: Approximately 5 Cm To 7 Cm, Ideal For Frying " Stainless Steel Colander = 10 Pcs "material: High-quality Stainless Steel, Rust-resistant And Durable. Food-grade, Suitable For Rinsing And Draining Food Items. Size: Available In Various Sizes, Typically 2 To 5 Liters Capacity. Diameter: 20 Cm To 30 Cm (varies By Model)." Measuring Cups And Spoons For Liquid = 10 Set "material: Food-grade Plastic Bpa-free If Plastic, For Safe Use With Liquids. Sizes: Measuring Cups: Commonly Includes 1 Cup (240 Ml), 1/2 Cup (120 Ml), 1/3 Cup (80 Ml), And 1/4 Cup (60 Ml). Measuring Spoons: Includes 1 Tablespoon (15 Ml), 1 Teaspoon (5 Ml), 1/2 Teaspoon (2.5 Ml), And 1/4 Teaspoon (1.25 Ml)." Cutting/chopping Board = 10 Pcs "material: Food-grade Plastic Non-porous And Stain-resistant To Prevent Bacterial Growth. Sizes: Small: 20 Cm X 15 Cm, Ideal For Small Tasks. Medium: 30 Cm X 20 Cm, Suitable For General Chopping. Large: 40 Cm X 30 Cm, Ideal For Cutting Larger Items." Kitchen Shears = 10 Set "material: Stainless Steel Blades For Durability, Rust Resistance, And Sharpness. Comfortable Handle Made Of Plastic Or Rubber, Often Ergonomic For Better Grip. Blade Length: Typically 8-10 Cm Cutting Length; Overall Length Around 20 Cm." Stainless Steel Knife = 2 Set "material: Stainless Steel Blades For Sharpness, Durability, And Corrosion Resistance. Handles Made From Plastic, Wood, Or Rubber For A Comfortable And Secure Grip. Set Includes (common Options): Chef's Knife (8 Inches): For Slicing, Dicing, And Chopping. Bread Knife (8 Inches): Serrated For Slicing Bread. Utility Knife (5 Inches): For Cutting Smaller Foods And Herbs. Paring Knife (3.5 Inches): For Peeling And Intricate Tasks." Casserole With Glass Lid = 3 Pcs "material: Stainless Steel Or Aluminum For Durability And Even Heat Distribution. Tempered Glass Lid With Steam Vent To Monitor Cooking Without Lifting The Lid. Capacity: Available In Various Sizes, Commonly 2 Liters To 6 Liters." Mixing Bowl Different Sizes (10l, 20l, 30l, 50l) = 10 Set "material: Food-grade Plastic (bpa-free) For Safety And Durability. Lightweight And Resistant To Staining And Odors. Sizes: 10 Liters: Suitable For Small To Medium Mixing Tasks. 20 Liters: Ideal For Larger Mixing Jobs Or Food Prep. 30 Liters: Great For Mixing Large Batches Of Ingredients. 50 Liters: Perfect For Heavy-duty Mixing In Commercial Kitchens." Plastic Food Grade Storage Boxes = 10 Pcs "material: Food-grade Polypropylene (pp) Or Polyethylene (pe), Safe For Food Storage. Sizes: 20 Kg Box (5pcs): Dimensions: Approximately 600mm (l) X 400mm (w) X 300mm (h) Capacity: Suitable For Storing Up To 20 Kg Of Food Items. 30 Kg Box(5 Pcs): Dimensions: Approximately 700mm (l) X 500mm (w) X 350mm (h)" 2.) Cooking Facility = 1 Set Gas Oven = 1 Pc "type: Gas Oven With Thermostat Capacity: Number Of Trays: 12 Trays Tray Size: Standard Size (approximately 40cm X 60cm Or Customizable Based On Design) Temperature Control: Thermostat: Adjustable Thermostat For Precise Temperature Control. Temperature Range: Typically Between 100°c To 300°c. Burners: Number Of Burners: 2 To 4 Gas Burners (depending On Model). Ignition Type: Manual Or Automatic Ignition System. Construction: Material: Heavy-duty Stainless Steel For Durability And Easy Cleaning. Insulation: Insulated Walls To Maintain Temperature And Reduce Heat Loss. Dimensions: Overall Size: Approximately 100cm (w) X 80cm (d) X 70cm (h) Fuel Type: Lpg " Complete Set Of Stove And Gas Tank = 2 Pcs Double Boiler Pot = 2 Pcs "capacity: 1.5 Liters To 4 Liters. " Stainless Steel Streamer = 1 Pc "material: High-quality Stainless Steel For Durability And Resistance To Rust And Corrosion. Size: 3 Liters To 10 Liters Capacity." Stainless Mixing Bowl = 5 Set "material: Made Of High-quality Stainless Steel For Durability, Corrosion Resistance, And Easy Cleaning. Sizes: Small: 1.5 Liters (1.6 Quarts) Medium: 3 Liters (3.2 Quarts) Large: 5 Liters (5.3 Quarts) Extra Large: 7 Liters (7.4 Quarts)" 3.) Upright Freezer = 1 Set Specifications: Power Supply: Single-phase (220v, 50hz) Capacity: 250 – 300 Liters (8.8 – 10.6 Cubic Feet) Temperature Range: -18°c To -25°c (adjustable Thermostat) Cooling System: Direct Cooling Or Fan-assisted Cooling (optional) Compressor Type: High-efficiency Inverter Compressor For Energy Savings Number Of Shelves: 4 – 6 Adjustable Wire Shelves Or Glass Shelves Door Type: Double Door, Swing Type Magnetic Door Seal For Air-tight Closure Defrosting: Manual Or Automatic Defrost (optional) Interior Lighting: Led Lighting For Energy Efficiency And Visibility Temperature Control: Digital Temperature Display With External Control Dimensions: Approx. 1210mm (w) X 730mm (d) X 1900mm (h) Weight: 45 – 60 Kg Safety Features: Overload And Overheat Protection Lockable Door For Security Mobility: Equipped With Caster Wheels For Easy Relocation Warranty: 2-year Warranty On Parts And Labor, 5-year Warranty On Compressor 4.) Food Dehydrator = 1 Pc Specifications: Power Supply: Single-phase (220v, 50hz) Power Consumption: 2.5kw Drying Capacity: 50 – 200 Kg Per Batch (depending On Machine Size And Type Of Fish) Drying Method: Hot Air Circulation System (electric Heating Elements With Fans) Temperature Range: 30°c – 90°c (adjustable) Drying Time: 4 – 12 Hours (depending On The Type Of Fish, Thickness, And Moisture Content) Tray Material: Stainless Steel Food-grade Trays (removable And Stackable) Number Of Trays: 10 Trays (upper And Lower Rack Gap: 34mm) Air Circulation System: Forced Air With Multiple Fans For Uniform Drying Construction Material: Exterior: Stainless Steel Or Powder-coated Mild Steel Interior: Stainless Steel (food-grade, Corrosion-resistant) Insulation: High-density Insulation Material To Minimize Heat Loss Humidity Control: Adjustable Humidity Control To Ensure Precise Drying Control System: Digital Temperature And Timer Control Overheat Protection Automatic Shut-off With Alarm Moisture Removal: 80% – 95% Moisture Reduction (depending On Drying Settings) Airflow: Horizontal Or Vertical Airflow (adjustable Based On Tray Configuration) Ventilation: Adjustable Vents For Moisture Release Mobility: Equipped With Caster Wheels For Easy Movement Included Accessories: Spare Heating Elements Tray Cleaning Kit User Manual And Maintenance Guide Warranty: 1-year Warranty On Parts And Labor ----------------nothing Follows------------------

Details: Description 1 Land Ambulance (type 1) 1 Unit I. Vehicle Specifications And Requirements · Vehicle Type: Four-wheel Passenger Van With 4 Doors (2 At The Front For The Driver And Passenger, One Sliding Door Or Barn Door At The Right Side And Tailgate Or Barn Door At The Rear) · Wheelbase: At Least 2,500-2,800 Mm · Drive Type: Rear Wheel Drive · Engine Size/displacement: 2,500 To 3,000 Cc · Engine Type: 4 Cylinders, In-line Type, 16 Valves, Double Over Head Cam (dohc), Maximum 3,400 Rpm · Alternator And Battery The Capacity Of The Alternator And Battery Must Be Sufficient To Supply The Additional Load Demands Of All Medical Equipment. The Amperage Capacity Of The Alternator Must Be At Least 110 Amperes. · Fuel-injector System: Direct Injection · Emission Compliance: Euro 4 · Fuel Type: Diesel · Fuel Tank Capacity: At Least 65 Liters · Transmission: Manual With At Least Five (5) Speed + One (1) Reverse · Steering: Left Hand Drive With Power-steering System · Brakes: Ventilated Disk On The Front And Ventilated Disk Or Drum Type On The Rear. With Anti-lock Braking System. With Parking Brake · Front Suspensions: Mcpherson Strut Or Double Wishbone Or Torsion Bar With Stabilizer · Rear Suspensions: Rigid Axle With Leaf Spring And Double Acting Shock Absorbers · Wheels: At Least 15 Inch, Aluminum Mag Wheels Or Steel Wheels With Full Cover · Tires: Radial Type And At Least 195 Mm Tire Width Standard Vehicle Lamps: Head Lamps, Tail Lamps, Stop Lamps, Signal Lamps, License Plate Lamps, Fog Lamps And Step Lamps · Vehicle Body Color: White · Floor Material: Metal With Anti-static Floor Matting. Each Entry Point Of The Patient Compartment Must Be Fitted With A Diamond Tread Plate Flooring. · Standard Dashboard Instrumentations: Speedometer, Odometer, Fuel Gauge, Digital Clock, Warning Lamps For Low Oil Pressure, Cooling Water Level, Overheating, Low Battery Charge, Indicator Lamps For Parking Brake And Head Light High-beam, Engine Check, Door Open. · Dashboard And Rear-view Camera System: Resolution Of At Least 1920x1080@30fps, Angle Of View At Least 120 Degrees Diagonal, At Least 2 Inch Led Display, Minimum Storage Capacity Of 64gb, With Loop Recording, Automatic On/off And Night Vision Recording In Low Light. The Cameras Must Be Permanently Installed On The Dashboard Or Windshield And At The Rear Part Of Vehicle. Rear-view Camera Must Be Have Color-coded Parking Grid Features. The Power Supply Must Be From The Vehicle Battery. · Standard Driver’s Cabin Accessories: Am/fm Radio With Speakers, Usb Connector, Front Personal Lamp For Driver And Passenger, Rear View Mirror, Sun Visor And Assist Grips For The Driver And Passenger. · Vehicle Doors Glass Windows: Central Or Power Door Locking System. Hydraulic / Electric Windows For Driver And Front Passenger Sides. The Vehicle Glass Windows (except The Windshield) Must Be Installed With Medium Shade (35% Visible Light Transmitted) Glass Tint. · Windshield Wipers: With At Least Three (3) Speed Intermittent With Washer · Air Conditioning System: Dual Type; At The Driver’s Cabin And At The Patient Compartment With Independent Controls. · Seat Belts: 3 Point Emergency Locking Retractor (elr) Seatbelts For The Driver And Front Passenger. · Airbags: Supplemental Restraint System (srs) Airbags For The Driver And For The Front Passenger. · Driver And Passenger Side Mirrors: Standard Convex Type, Manual Or Power Adjustment · Vehicle Interior Trim: Moulded Trim. The Ceiling Must Be Provided With Insulation. · Stainless Steel Plate On The Rear Bumper To Protect The Bumper When The Ambulance Stretcher Is Being Loaded To The Ambulance. · Set Of Tools: Hydraulic Jack, Tire Wrench, Flat And Philips Screw Drivers, Set Of Pliers, Adjustable Wrench, Early Warning Device And Spare Wheel And Tire. Ii. Emergency Lights, Sirens And Public Address System · Emergency Lights: Roof Mounted Light Bar With Red And Green Flashing Led Lights. The Length Of The Light Bar Must Be The Same As The Width Of The Vehicle Roof. Electric Siren And Public Address System: Standard Ambulance Siren Tones (horn, Manual, Wail, Yelp, Phaser, Hilo/two Tone) And With At Least Two 100 Watts Amplifier And Siren Speakers. With Rotary Switch And Momentary Push-button Override Control. Public Address Override With Attached Microphone And Volume Control Knob · Red And Green Flashing Led Lights Mounted On The Upper Part Of The Rear Of The Ambulance · Red And Green Led Flashing Lights Mounted On The Front Grill Of The Ambulance Iii. Ambulance Body Marking · The Front Of The Ambulance Shall Be Marked With A Reflectorized And Capitalized Word “ambulance” Which Is Spelled Out In Reverse (mirror Image). The Height Of Each Letter Shall Be No Less Than 10 Centimeters And The Word Shall Be Seen At Least Six (6) Meters Away. · Each Side Of The Ambulance Body Shall Have The Capitalized Word “ambulance” Not Less Than 15 Cm In Height And The Letters Must Be In Red Color. · The Rear Side Of The Ambulance Body Shall Be Marked With A Reflectorized And Capitalized Word “ambulance” Not Less Than 15 Cm In Height And The Letters Must Be In Red Color. · The Prescribed Doh Logo With A Diameter Of Not Less Than 36 Cm Shall Be Placed On The Driver’s Door And On The Front Passenger Door. Iv. Patient Compartment · Compartment Interior Height: At Least 1600mm · Compartment Interior Width: At Least 1500mm · Partition Between The Driver And Patient Compartment: Air Tight Bulkhead Made Of Non-porous Material With A Transparent And Shatter-proof Sliding Window At Least 35 Cm X 30 Cm. · Storage Cabinet For Medicines, Instruments And Medical Equipment > Built-in Cabinet Made Of White Painted Aluminum Panels Or Other Lightweight, Equivalent Strength Material Such As Fiberglass, Composites And Fiberglass Reinforced Plastics. The Cabinet Must Be Mounted On The Upper Left Side Of The Patient Compartment And Must Be At Least 200 Cm But Must Not Be More Than 210 Cm In Length. The Cabinet Must Be Firmly Anchored (bolted Or Welded) To Tapping Plates Of The Body Structure. > The Cabinet Must Have Transparent And Shatter-proof Sliding Doors With Low Profile Handles. The Sliding Doors Must Be Easily Opened But Must Not Open During Transit. The Sliding Doors Must Be Fitted With Automatic Latch Or Friction Holding Device. > The Cabinet Must Have At Least 4 Shelves With At Least One Shelf Designed To Fit And Carry Heavy Medical Equipment Such As The Defibrillator And Nebulizer. The Shelves Must Have A Depth At Least 30 Cm But Must Not Be More Than 50 Cm. · Compartment For The Folding Stretcher And Scoop Stretcher: Installed Below The Storage Cabinet, Made Of White Painted Aluminum Panels Or Other Lightweight, Equivalent Strength Material Such As Fiberglass, Composites And Fiberglass Reinforced Plastics. The Compartment Must Be At Least 200 Cm But Must Not Be More Than 210 Cm In Length. The Cabinet Must Be Firmly Anchored (bolted Or Welded) To Tapping Plates Of The Body Structure. Bench For Medical Personnel: The Ambulance Must Be Fitted With 3-seater Bench Permanently Mounted On The Ambulance Floor; One On The Head Side Of The Patient And One On The Right Side Of The Patient Compartment. The Bench (seat And Backrest) Must Be Made Of Sturdy Aluminum Frame And Panels Coated With White Color Paint Or Other Lightweight, Equivalent Strength Material Such As Fiberglass Reinforced · Plastics Or Plastic Laminated. The Seat And Backrest Must Be Fitted With Mattress Made Of Polyurethane Foam Covered With A Washable Leatherette Material. The Construction Of The Bench Must Be In Such A Way That The Underneath Can Be Used As A Compartment. The Bench Must Have A 2 Point Seatbelt For Each Person. > Overhead Lighting: At Least 2 Led White Lights With Low Light Option > Grab Rail: Aluminum Or Stainless Steel Grab Rail At Least 120 Cm Long, 10 Cm Depth (maximum) Installed On The Ceiling Right Above The Patient/ambulance Stretcher. > 220v Ac Supply: The Patient Compartment Must Be Installed With An Electronic Inverter With A Capacity Of At Least 3kva And An Output Voltage Of 220v, 60 Hz. At Least Five (5) Convenience Outlets Must Be Installed At The Different Points On The Compartment To Supply Power To The Medical Equipment. > Intercom System: Intra-vehicle Intercom System Must Be Fitted To Serve As Voice Communication Between The Driver And Personnel In The Patient Compartment. V. Communication Equipment Two (2) Pieces Cellular Phones (one For The Ambulance And One For The Hospital/base). The Cellular Phones Must Be 4g Network Capable, With Internal Memory Of At Least 64gb And 4gb Ram Smartphones. The Phones Must Be Provided With Sim Cards And Battery Charger. Vi. Medical Equipment And Instruments · Ambulance Stretcher > Length: 180 – 185 Cm > Width: 48 – 55 Cm > Loading Height Should Match The Vehicle Floor Height > Loading Capacity: At Least 175 Kg > Materials: Stainless Steel, High Grade Aluminum Alloy > Head Part Rising Angle: At Least 75° Knee Part Rising Angle: At Least 15° > With Collapsible Side Rails And Quick Release Patient Restrain System > With Durable Folding Leg Mechanism > The Mattress Must Be Made Of High-density Polyester Fiber Foam With A Thickness Of At Least 5 Cm And Covered With Waterproof Vinyl Material. > Wheels: 200 - 210mm Diameter, Fixed Front With Locking Brakes And Auto-directional Rear And With 50-55 Cm Loading Carriage Wheels > Loading Rail Mounted In The Ambulance With Latching System > Non-removable Doh Logo And The Words “for Ambulance Use Only” Must Be Marked On The Visible Part Of The Equipment. · Automatic External Defibrillator (aed) > Compact, Lightweight, Easy To Use, Bi-phasic Defibrillator With Manual (with Easy 1-2-3 Operation) > Waveform: Rectilinear Biphasic > Defibrillator Charge Hold Time: Not More Than 30 Seconds > Patient Safety: All Patient Connections Are Electrically Isolated > Charge Time: Less Than 10 Seconds With New Battery Charge To 200j With A Fully-charged Battery > Battery Operated > Self-test: Configurable Automatic Self-test When Device Is Turned-on > Monthly Full-energy Test (200j) > Automatic Self-test Checks: > Battery Capacity > Electrode Connection > Electrocardiogram And Discharge Circuits > Microprocessor Hardware And Software > Cpr Circuitry And Cpr-d Sensor And Audio Circuitry > Cpr: Metronome Rate (variable 60 To 100 Cpm) > Defibrillator Advisory: Evaluates Electrode Connection And Patient Ecg To Determine If Defibrillation Is Required > Shockable Rhythms: > Ventricular Fibrillation With Average Amplitude Of > 100 Microvolts > Wide Complex Ventricular Tachycardia With Rated Greater Than 150 Bpm For Adults And 200 Bpm For Pediatrics > Patient Impedance Measurement Range: At Least 0 To 300 Ohms > Defibrillator: Protected Ecg Circuitry > Display Format: Optional Lcd With Moving Bar > Size: Approximately 2.6” X 1.3” > Ecg Viewing Window: At Least 2.6 Seconds > Optional Ecg Display Sweep Speed: Not More Than 25mm/sec; 1”/sec > Data Recording And Storage > At Least 50 Minutes Of Ecg And Cpr Data. > If Audio Recording Is Installed And Enabled, At Least 20 Minutes Of Audio Recording, Ecg And Cpr Data. > If Audio Recording Is Disabled, At Least 7 Hours Of Ecg And Cpr Data. > Pc Minimum Requirements For Configuration And Patient Data Recovery: Windows® 98, Windows® 2000, Windows® Nt, Windows® Xp, Ibm Compatible Pii With 16550 Uart (or Higher) Computer. 64mb Ram. Vga Monitor Or Better. Cd-rom Drive. Irda Port. 2mb Disk Space. > Available With Pediatric Pacing Cable And Pads Synchronized And Direct Defibrillation > Biphasic Energy Waveform, Adjustable Output, From Approximately 1 Up To 200 Joules > Load Compensation Circuit Allows Precise Delivery Of Selected Energy, Based On Patient’s Impedance > Energy Selection > Charge Controls - Push-button Controls On Front Panel > Charge Time - Less Than 10 Seconds With New Battery Charge To 200j With A Fully-charged Battery > Charge/ready Is Indicated Via Audiovisual > Defibrillator Energy - Approximately ±15% At 50ω > Accuracy - Approximately ±30% Over The Range Of 25 To 100 Ω > Defibrillator Waveform - 5ms Monophasic Pulse Display Shows Ecg, Heart Rate, Battery Status And Energy Output Pre-set > Monitor Display Size: Bright Back-lit Alphanumeric Lcd, Approximately 10 X 6 Cm > Frequency Response: Non-diagnostic > Heart Rate Meter: Three-digit Readout Displays Rates From 20 To 300 Bpm > Heart Rate Alarm: User Selectable Alarm Limits > Self-test Is Performed Each Time The Device Is Switched On > System Reports, With Audiovisual Alert: Status, Operation, Malfunctions And Low Battery > Internal Safety Discharge Upon 40seconds Non-delivery Of Accumulated Energy, Switch-off And Technical Failure > Sensitivity, Adjustable 5, 10 And 20mm/mv Pads: > Shelf Life: 5 Years > Conductive Gel: Polymer Hydrogel > Conductive Element: Tin > Packaging: Multilayer Foil Laminate Pouch > Impedance Class: Low > Cable Length: At Least 36 In (91 Cm) > Sternum: Length: At Least 6.1 In (15.5 Cm); Width: At Least 5.0 In (12.7 Cm); Length, Conductive Gel: At Least 3.5 In (8.9 Cm); Width, Conductive Gel: At Least 3.5 In (8.9 Cm); Area, Conductive Gel: At Least 12.3 Sq In (79.0 Sq Cm) > Apex: Length: At Least 6.1 In (15.5 Cm); Width: At Least 5.6 In (14.1 Cm); Length, Conductive Gel: At Least 3.5 In (8.9 Cm); Width, Conductive Gel: At Least 3.5 In (8.9 Cm); Area, Conductive Gel: At Least 12.3 Sq In (79.0 Sq Cm) > Complete Assembly: Folded Length: At Least 7.6 In (19.4 Cm); Folded Width: At Least 7.0 In (17.8 Cm); Folded Height: At Least 1.5 In (3.8 Cm) > Design Standards: Meets Applicable Requirements Of Ansi/aami/iso Df-39-1993. > Shock Resistant Housing Allows System To Function In Demanding Environment > Integrated Carry Handle Facilitates Transport > Splash-resistant Alphanumeric Function Keys Power Supply: > User Replaceable Battery Is Removable/replaceable By The Operator. (10 Type 123a Photo Flash Lithium Manganese Dioxide Batteries. > Battery Capacity: Typical New (20°c) = 5 Years (at Least 225 Shocks) Or At Least 13 Hours Continuous Monitoring. End Of Life Designated By Red X (typical Remaining = At Least 9 Shocks). Battery Compartment To Be Clearly Labeled, Splash-proof And Requiring Tool For Opening For Battery Replacement > Electrical Source Requirements: Battery Operated > Operating Temperature: 32° To 122°f; 0° To 50°c > Storage Temperature: -22° To 140°f; -30° To 60°c > Humidity: 10 To 95% Relative Humidity, Non-condensing > Vibration: Mil Std. 810f, Min. Helicopter Test > Shock: Iec 68-2-27; 100g > Altitude: 300 To 15,000 Ft.; -91m To 4573m > Particle And Water Ingress: Ip-55. > Defibrillator Pads (self- Adhesive, Disposable And Non-polarized) At Least Five (5) Pairs For Adult And At Least Five (5) Pairs For Pedia Ø Non-removable Doh Logo And The Words “for Ambulance Use Only” Must Be Marked On The Visible Part Of The Equipment. · Nebulizer > Portable, Compressor-driven Nebulizer Pump, And A Four-pole Single Phase Motor Design In Metal Frame Construction > Easy To Operate With Sturdy Design For Use In Demanding Environment > Cup Capacity Minimum 3ml To Maximum 10ml > Nebulization, Approximately 0.1 To 0.2ml/minute > Residual Volume Maximum 2ml > Flow Delivery Range (under Load) 0.5 To Maximum 12 Liters/minute Or Greater > Median Mass Aerodynamic Diameter (mmad) Of Particles 0.5 To 4 Microns > Operating Temperature Range 5 To 50 ⁰c > Operating Relative Humidity Range Up To 65% > Compressor Requires No Maintenance And Delivers Oil-free Flow Diaphragm Type And Maximum Compressor Pressure Of 30 Psig Or Greater > Device, With Carry Handle, Is Provided With Accessory Storage Compartment > Power Supply, 220v/60hz > Power Consumption, Approximately 90w > System Configuration Accessories, Spares And Consumables: · System As Specified · Nebulizer Atomizer Body Piece (dome) · Reusable Mouth Piece, Pediatric Size (fitting Atomizer Body Piece) · Reusable Mouth Piece, Adult Size (fitting Atomizer Body Piece) · Air Tubing, Diameter Approximately 6/9mm (inner/outer), Length Approximately 1 Meter · Dosage Cup · Reusable Mask, Size Pediatric · Reusable Mask, Size Adult · Spare Inlet Filters · Spare Particle Filters · Set Of Spare Fuses · Portable Suction Machine > Electrical Suction Pump Supporting Medical Interventions Such As Resuscitation Or Minor Surgery > With Graduated Plastic Jar Auto-clavable, Capacity 1.2 Liters > Jar Is Covered And Fit With Overflow Valve And Antibacterial Filter > Suction Flow Maximum, Approximately 17l/minute > Vacuum Adjustable From 0 To Approximately - 600mmhg > Vacuum Control Button And On/off-switch > Sturdy Shock Resistant Casing, Easy To Carry And Easy Clean > Silent Operation Supplied With: > 2 X Set Of Silicone Tubes, Diameter 8/14mm (inner / Outer), Length Approximately 2.5m > 2 X Bi-conical Connectors Fitting The Silicone Tubes > 1 X Spare Jar Of 1l With Cover, Gasket And Overflow Valve > 1 X Set Of Spare Antibacterial Filters > 1 X Set Of Spare Fuses > 1 X Instructions For Assembly, Use And Maintenance, And List Of Accessories And Spare Parts With Product Reference Code In English Language > Consumables Should Be Available In The Local Market Power Supply > Power Input To Be 220-240vac (single Phase) / 60hz As Appropriate Fitted With Philippine Standard Plug > Voltage Corrector/stabilizer Of Appropriate Ratings Meeting Philippines Standard Specifications (input 160-260 V And Output 220-240 V And 60 Hz) > Power Consumption Approximately 50 Watts > Non-removable Doh Logo And The Words “for Ambulance Use Only” Must Be Marked On The Visible Part Of The Equipment · Examining Light (mounted On The Head Side Of The Patient) > Mobile Examination Light, Sturdy Construction. > On Heavy Base With 5 Swivel Castors, 2 With Brakes. Low Center Of Gravity For Optimal Stability And Reach > Single Lamp With Led Bulb: White Led Approximately 50,000 Hours Life > Field-of-view Diameter, Approximately 0.15 M At Working Distance > Homogeneous Illumination Across Entire Field-of-view, Approximately 20,000 Lux At 30.5 Cm To 50 Cm Working Distance > Color Temperature, Approximately 5500⁰k > Light Head Mounted On Spring Loaded Articulating Arm, Height Approximately 1.50 M > Touch Less On/off Switch And Electronic Control Box Incorporated In Base Or Spring Loaded Articulating Arm Power Supply: > -power Input To Be 220 Vac (single Phase) / 60hz As Appropriate Fitted With > Philippine Standard Plug > -power Consumption, Approximately 35 Watts Dimensions: > -weight: Total Mobile Stand: Approximately 5.78 Kg. > -height: Total Mobile Stand: Approximately 150.0 Cm (including Luminaire And Control Box) > Non-removable Doh Logo And The Words “for Ambulance Use Only” Must Be Marked On The Visible Part Of The Equipment · Aneroid Sphygmomanometer (mounted On The Ambulance Wall On The Head Side Of The Patient) > The Sphygmomanometer Is Composed Of Cloth Cuff Containing An Inflatable Bag (adult-25 Cm To 35 Cm) > Connected Via A Tube To A Flexible Bulb With Valve And Integrated Manometer Needle Gauge. > Latex And Mercury Free. > Bp Cuffs Are Anti-microbial Treated. > The Adult (25 Cm To 35 Cm) Cuff With Double Velcro Fastening, Enabling It To Be Adjusted To Fit Tightly > Around The Arm. > The Cuff Is Washable, Very Strong And Reinforced At Both Ends. > The Bag Is Inflated By Means Of The Flexible Bulb Connected Via A Tube (length Approximately 60 Cm, > Flexible And With Reliable Quick Connector) > The Quick Connector Can Easily Be Connected To All Types Of Inflation Bulbs > Inflation Bulb With Integrated Manometer Needle Gauge > Dial Graduated Up To 300 Mmhg Aneroid Instrument Mounted At A 20º Angle For Ease Of Viewing Clinical Sphygmomanometer For Desk Type, With Pressure Release Valve > Pressure Gauge To Allow Reading Of Pressure To 2mmhg Accuracy > Gauge Body To Allow Recalibration Of Readings, Yet In Normal Operation Be Sealed And Secure > Plastic Manometer With Chrome Plated Steel Bracket > Non-removable Doh Logo And The Words “for Ambulance Use Only” Must Be Marked On The Visible Part Of The Equipment · Folding Stretcher > Length: At Least 1900 Mm > Width: At Least 530 Mm > Loading Capacity: At Least 120 Kg > The Stretcher Must Have A Quick Release Patient Restrain System > Frame Material: High Grade Aluminum > Frame Must Be Made Of Sturdy Lightweight, Non-twisting Construction And With Rubber Handles > Stretcher Bed Material Must Be Washable > Non-removable Doh Logo And The Words “for Ambulance Use Only” Must Be Marked On The Visible Part Of The Equipment · Scoop Stretcher > Length: At Least 200 Cm > Adjustable Length > Width: At Least 42 Cm > Loading Capacity: At Least 150 Kg > The Stretcher Must Have At Least Three (3) Quick Release Patient Restrain System > Frame Material: High Grade Aluminum > Non-removable Doh Logo And The Words “for Ambulance Use Only” Must Be Marked On The Visible Part Of The Equipment · Heavy Duty Stethoscopes (dual) > Easy To Dismantle, Clean, And Disinfect. > Double Cup, Dual-use (adult And Pediatric Auscultation) In Stainless Steel Or Chromed Brass. > Adult Diaphragm: Approximately 43mm > Bell Diameter: Approximately 32mm > Y Tube Treated Rubber With Large Diameter: Approximately 10 Mm > Arms: Stainless Steel Or Chrome Brass Or Aerospace Alloy, With Spring Treated To Give Lasting Spring And Maximum Reliability And Comfort. > Removable Plastic/rubber Ear-pieces. > Supplied With Spare Diaphragms Or Diaphragm Membrane, Y Tube And A Pair Of Ear-pieces > Environmental Factors: > The Unit Shall Be Capable Of Being Stored Continuously In Ambient Temperature Of 0 - 50 ⁰c And Relative Humidity Of 15-90%. > The Unit Shall Be Capable Of Operating In Ambient Temperature Of 20-30 ⁰c And Relative Humidity Of Less Than 70%. > Non-removable Doh Logo And The Words “for Ambulance Use Only” Must Be Marked On The Visible Part Of The Container Box · Non-contact Thermometer > Measuring Scale: Degree Celsius > Lcd Or Led Display With At Least Three (3) Digit Measurement Display > Components Must Have No Glass And Mercury Materials > Measurement Range: 34°c To 42°c Or Wider Range. > Beep Sound Upon Measurement > Switch Off Automatically When Not In Use. > Battery Operated. > With Low Battery Indicator > Non-removable Doh Logo And The Words “for Ambulance Use Only” Must Be Marked On The Visible Part Of The Equipment · Blood-glucose Meter With Strip > Hand Held Meter > No Routine Maintenance Reading Range/linearity From 20 To 600 Mg/dl > Maximum Reading Time Of Less Than 10 Seconds > Use Of Electrochemical Technology > Use A Minimum Blood Sample Of Less Than 1.5µl > Lcd Display > Measuring Unit In Mg/dl. > Wide Operating Temperature > A Minimum Memory Of 50 Test Results > Should Have Easy Code Entry Technique > Battery Should Be Replaceable Without Using Any Tools > Should Have Facility To Ensure Accuracy Of Measurements. > Should Be Supplied With Three Types Of Control Solutions Of Each At Least 3 Ml > Item Should Have Data Transfer Facility Through Usb Device Or Blue Tooth > The Unit Should Be Cleanable And Sterilizable With Alcohol · Glucose Strips > Should Be Able To Use Capillary Blood Samples. > Should Have A Minimum 4 Months Shelf Life After Opening The Strip Vial. > All Strips Should Have At Least One Year Expiry Date From The Date Of Supply. > Minimum Of 10 Strips, 10 Lancets, And 1 Lancing Device Should Be Supplied Along With The Equipment. > Strips Should Be Available In The Local Market. Power Requirements > Shall Be Battery Operated 3-volt Lithium Ion Cell Battery Or 2 X (aaa) Alkaline Battery. Battery Should Be Supplied With Item And Should Last At Least 1000 Tests. > Non-removable Doh Logo And The Words “for Ambulance Use Only” Must Be Marked On The Visible Part Of The Equipment · Manual Resuscitators For Adult > Resuscitator To Ventilate Adult (body Weight Over 30kg) > Resuscitator Operated By Hand > Ventilation With Ambient Air > Resuscitator Shall Be Easy, To Disassemble And Reassemble, To Clean And Disinfect, And Be Autoclavable. > All Parts Must Be Manufactured From High-strength, Long-life Materials And Require No Special Maintenance Or Storage Conditions. Resuscitator Shall Be Supplied As A Complete Set With: > Compressible Self-refilling Ventilation Bag, Capacity: 1500-2000 Ml > Non-rebreathing Patient Valve With Or Without Pressure Limiting Valve, Patient Connector Outside/inside Diameter (od/id): 22/15 Mm > Inlet Valve With Nipple For 02 Tubing > Oxygen Reservoir Bag Complete, Capacity: 2000-2600 Ml > Masks, Transparent, In 3 Sizes: > 1 Mask, Face Shape Type, Size Adult Small/teenager > 1 Mask, Face Shape Type, Size Adult Medium > 1 Mask, Face Shape Type, Size Adult Large Resuscitator Supplied In A Box As A Complete Set, With Clear Instructions / Diagrams For Use Covering The Technical Performances, The Use And The Maintenance Of The Resuscitator And Assembly In English Language > Materials: Latex-free > Compressible Self-refilling Ventilation Bag: Silicone Rubber, > Non-rebreathing Patient Valve With Pressure Limiting Valve: Polycarbonate/polysulfone/silicone, > Inlet Valve With Nipple For O2 Tubing: Polycarbonate/polysulfone/silicone, > Oxygen Reservoir Bag: Plastic > Masks: Transparent Silicone Rubber. Standards, Safety And Training: > Should Be Fda, Ce, And Ul Approved Product > Conforming To International Standards: Iso, Ce Certification, Fda > Non-removable Doh Logo And The Words “for Ambulance Use Only” Must Be Marked On The Visible Part Of The Equipment Or Container · Manual Resuscitators For Neonate/infant > Resuscitator To Ventilate Preterm, Newborn, Small Infant (body Weight 0-7 Kg) > Resuscitator Operated By Hand > Ventilation With Ambient Air > Resuscitator Shall Be Easy, To Disassemble And Reassemble, To Clean And Disinfect, And Be Autoclavable. > All Parts Must Be Manufactured From High-strength, Long-life Materials And Require No Special Maintenance Or Storage Conditions. Resuscitator Shall Be Supplied As A Complete Set With: > Compressible Self-refilling Ventilation Bag, Capacity: 200-250ml > Non-rebreathing Patient Valve With Pressure Limiting Valve, 40± 5 Cmh2o, Patient Connector Outside/inside Diameter (od/id): 22/15mm, > Inlet Valve With Nipple For 02 Tubing > Masks, Transparent, In 3 Sizes: > 1 Mask, One Piece, Round Shape Type, Size Preterm > 1 Mask, One Piece, Round Shape Type, Size Newborn > 1 Mask, One Piece, Round Shape Type, Size Infant Small > Resuscitator Supplied In A Box As A Complete Set, With Clear Instructions / Diagrams For Use Covering The Technical Performances, The Use And The Maintenance Of The Resuscitator And Assembly In English Language > Materials: Latex-free > Compressible Self-refilling Ventilation Bag: Silicone Rubber > Non-rebreathing Patient Valve With Pressure Limiting Valve: Polycarbonate/polysulfone/silicone > Inlet Valve With Nipple For O2 Tubing: Polycarbonate/polysulfone/silicone > Masks: Transparent Silicone Rubber Standards, Safety And Training: > Should Be Fda, Ce, And Ul Approved Product > Conforming To International Standards: Iso, Ce Certification, Fda Non-removable Doh Logo And The Words “for Ambulance Use Only” Must Be Marked On The Visible Part Of The Equipment Or Container Manual Resuscitators For Pedia (child) > Resuscitator To Ventilate Child (body Weight 7-30 Kg) > Resuscitator Operated By Hand > Ventilation With Ambient Air > Resuscitator Shall Be Easy, To Disassemble And Reassemble, To Clean And Disinfect, And Be Autoclavable. > All Parts Must Be Manufactured From High-strength, Long-life Materials And Require No Special Maintenance Or Storage Conditions. > Compressible Self-refilling Ventilation Bag, Capacity: 500-700 Ml > Non-rebreathing Patient Valve With Pressure Limiting Valve, 40 ±5 Cmh2o, Patient Connector Outside/inside Diameter (od/id): 22/15 Mm > Inlet Valve With Nipple For 02 Tubing > Oxygen Reservoir Bag Complete, Capacity: 2000-2600 Ml > Masks, Transparent, In 3 Sizes: · 1 Mask, Round Shape Type, Size Child Small · 1 Mask, Round Shape Type, Size Child Medium · 1 Mask, Face Shape Type, Size Child Large > Resuscitator Supplied In A Box As A Complete Set, With Clear Instructions / Diagrams For Use Covering The Technical Performances, The Use And The Maintenance Of The Resuscitator And Assembly In English Language > Materials: Latex-free > Compressible Self-refilling Ventilation Bag: Silicone Rubber > Non-rebreathing Patient Valve With Pressure Limiting Valve: Polycarbonate/polysulfone/silicone, > Inlet Valve With Nipple For O2 Tubing: Polycarbonate/polysulfone/silicone, > Oxygen Reservoir Bag: Plastic > Masks: Transparent Silicone Rubber · Oxygen Cylinder With Oxygen Therapy Set > At Least 20 Pounds Capacity > Must Be Color Green > Oxygen Therapy Set · Gauge Reading: 1,800 Psi Or Higher · Flowmeter: 0 To 15 Li/min · Humidifier Bottle: Hard Plastic, Capacity: 200ml To 300ml · Accessories: Mouth Piece, Tubing, Open Wrench For Installing The Therapy Set To The Cylinder · The Cylinder Must Be Placed In A Holder Mounted On The Head Side Of The Patient · Non-removable Doh Logo And The Words “for Ambulance Use Only” Must Be Marked On The Visible Part Of The Equipment · Laryngoscopes Set > Constituted Of A Large Hollow, Cylindrical, Slightly Ribbed Handle And A Set Tongue Depressor In Fiber Optic. > The Handle Is Made Of Fiber Optic Led Light > The Handle Can Be Opened At One End To Insert Two Type C Alkaline Battery > The Other End Has A Stud Contact Which Fits The Various Sizes And Types Of Depressors > The Set Of Autoclavable Depressors Includes: A. 4 Curved Depressors, Macintosh Type: No. 1: Approximately 66 Mm Length No. 2: Approximately 85 Mm Length No. 3: Approximately 105 Mm Length No. 4: Approximately 140 Mm Length B. 5 Straight Depressors, Miller Type: No. 0: Approximately 56 Mm No. 1: Approximately 82 Mm No. 2: Approximately 135 Mm No. 3: Approximately 175 Mm No. 4: Approximately 185 Mm > Contained In Suitable Protective Plastic Box Or Vinyl Sturdy Padding Case > Battery Compartment (if Reusable) To Be Sealed Against Liquid Ingress, Yet Easily Opened > On/off Switch To Be Robust And Easy To Use > Non-removable Doh Logo And The Words “for Ambulance Use Only” Must Be Marked On The Visible Part Of The Container Box · Immobilization Devices A) Cervical Collars I. Rigid For Children Ages 2 Years Or Older Ii. Child And Adult Sizes (small, Medium, Large) B) Head Immobilization Device (not Sand Bags): Firm Padding Or Commercial Device C) Lower Extremity (femur) Traction Devices I. Limb-support Slings Ii. Padded Ankle Hitch Iii. Padded Pelvic Support Iv. Traction Strap (adult & Child Sizes) D) Upper And Lower Extremity Immobilization Devices I. Joint-above And Joint-below Fracture (sizes Appropriate For Adults And Children) Ii. Rigid- Support Constructed With Appropriate Material (cardboard, Metal, Pneumatic, Vacuum, Wood Or Plastic) – Various Sizes E) At Least 2 Pieces - Resistant Straps Or Cravats · Delivery Set All Instruments Must Be Surgical Grade Stainless Steel Material With ± 0.4 Inch Measurement Tolerance > 1 Pc. Sponge Holding Forceps, Rampley 9.5" > 1 Pc. Kidney Dish 10" > 1 Pc. Bowl 200mm > 1 Pc. Umbilical Scissors, American, Straight 4.5" > 1 Pc. Needle Holder Mayo Hegar Straight 6.5" > 1 Pc. Episiotomy Scissors 14.5 Cm > 1 Pc. Cusco Vaginal Speculum Medium > 1 Pc. Hartmann Mosquito Artery Forceps Straight 120mm > 1 Pc. Metal Catheter > 1 Pc. Uterine Curette > 1 Pc. Treves Dissecting Forceps, Plain, 200mm > 1 Pc. Spencerwells Artery Forceps Curved 6" > 1 Pc. Kocher Artery Forceps, Toothed Straight 6" Non-removable Doh Logo And The Words “for Ambulance Use Only” Must Be Marked On The Visible Part Of The Instrument Container Box. · Patient Monitor > Atleast 10 Inches Color Tft Led Display > 800 X 600 Pixels Resolution > Maximum Display Of 11 Channels; Auto Channel Height Adjustment Function > Lightweight & Ergonomic Design > Parameters: 3/5 Lead Ecg, Hr, Resp, Nbp, Spo2, Pr, Temp > With St Segment Analysis And 21 Calls Of Arrhythmia > Fast Spo2 Technology With Anti-motion And Low Perfusion Performance > Navigation Wheel For Information Input And Screen Navigation > Backlit Function Buttons For Quick Access To Key Functions > Bed-to-bed Overview Function For Up To 32 Monitors Without Central Monitoring System > Bi-directional Communication Via Lan Networking To A Central Monitoring System > Standard Hl7 Output > Fan-less Design To Reduce Dust Deposits > Applications From Neonate To Adult > With Oxycrg & Minitrend > With Big Number Screen, Dynamic Trend Screen, & Ocrg Screen > 4 User-defined Layout > Timing Clock Configurable From 5-30mins > 1,600 Sets Nbp Table > 1,200-hour Trend Graph Of All Parameters (with Data Manager Function) > 120-minute Full Disclosure Ecg 1 Waveform Review (with Data Manager Function) > 200 Sets Alarm Events & 200 Sets Arrhythmia Events > With Drug Calculation > With Hr Variation & Dynamic Blood Pressure Analysis > Rechargeable Lithium Ion Battery With 2.5 Hrs Of Operation > With Built-in 3-channel Recorder > Standard External Interface Available: Ecg Analog Output, Vga Output, Nurse Call, Lan, Usb > Patient Data Export Using A Usb Data Manager > Net Weight: Approximately 4.2kg Vii. Other Equipment And Accessories Note: The Items Below (except The Iv Holder) Must Be Marked With Non-removable Doh Logo And The Words “for Ambulances Use Only” On The Visible Part Of The Equipment. > Fire Extinguisher (rating 2a10bc), Five (5) Pounds, With Holder Mounted On The Ambulance Floor. > Heavy Duty Led Flashlight With At Least 1,000 Lumens Of Brightness With Extra Batteries. Iv Holder (mounted On The Ambulance Wall Head Side Of The Patient). > Digital Clock With At Least 4 Inch Display Mounted On The Ambulance Wall. > Air Purifier With Multi-stage Air Filters (pre-filter, Hepa, Carbon) And With Uv Light. > Garbage Container At Least 3 Liter Capacity And Made Of Fiberglass Reinforced Plastic Or Acrylonitrile Butadiene Styrene (abs) Plastic Material And With Lid Cover. The Container Must Be Properly Labelled And Must Be Mounted On The Ambulance Floor. > Sharps Container With Sliding Lid And At Least 1 Liter Capacity, Made Of Fiberglass Reinforced Plastic Or Abs Plastic Material. The Container Must Be Mounted On The Ambulance Wall. I. Other Requirments To Be Submitted During The Bid Opening 1. Product Brochure(s) Or Technical Data Sheet(s) In Hard And Soft Copies Showing The Technical Specifications Of The Following In English Language: A) Ambulance Vehicle B) Emergency Lights, Siren And Public Address C) Ambulance Stretcher D) Automatic External Defibrillator E) Nebulizer F) Examining Light G) Aneroid Sphygmomanometer H) Folding Stretcher I) Scoop Stretcher J) Heavy Duty Stethoscopes K) Non-contact Thermometer L) Blood Glucose Meter M) Manual Resuscitators N) Suction Machine O) Oxygen Therapy Set P) Laryngoscopes Set Q) Delivery Set R) Air Purifier S) Patient Monitor · Valid Marketing Authorization, Registration Approval Or Free Sale Certificate For The Automatic External Defibrillator Issued By The Health Authority In The Country Of Origin. · Valid Certificate Of Distributorship (as First Tier Distributor) Issued By The Foreign Manufacturers Or Local Distributors Of The Medical Equipment And Instruments Authorizing The Bidder To Sell/distribute Their Products. · Notarized Certificate From The Bidder: That The Brands Of The Medical Equipment And Instruments Have Been In The Local And/or International Market For At Least Ten (10) Years. > That Medical Equipment And Instruments Are Brand New, Unused, Not Discontinued Models And Were Not Subjected To Any Product Recall. · Bidder’s Valid And Current License To Operate (lto) As A Medical Device Distributor Issued By The Philippine Food And Drug Administration. · Valid And Current Certification Of Product Registration (cpr) For The Thermometer, Lancets In The Blood-glucose Meter And Manual Resuscitator Issued By The Philippine Food And Drug Administration (pfda) · Notarized Certificate From The Manufacturer Or Local Dealer Of The Ambulance/vehicle: > That The Manufacturer Has Been Manufacturing Vehicles With Diesel Engines For The Past Twenty Five (25) Years. > That The Ambulance/vehicle Is Brand New, Unused, Not A Discontinued Model And Was Not Subjected To Any Product Recall. · Proofs (such As Sales Invoice) That The Brand Of The Vehicle Has Already Been Sold In The Country As An Ambulance. Requirement/s If Declared The Lowest/single Calculated Bid · Site Inspection To The Bidder’s Facility To Verify/validate The Capability And Capacity Of The Bidder To Fabricate The Ambulances As Well As Sample Unit With Complete Medical Accessories. The Inspection Shall Be Conducted By The Procuring Entity Technical Working Group. This Requirement Is Not Applicable If The Facility Is Located Outside The Philippines. · Motor Vehicle Service Center Should Be Located In Each Province Namely Cebu, Bohol, & Negros Oriental In Order For The Recipient Facility To Have Easy Access During Preventive Maintenance. Requirements If Awarded The Contract · The Supplier Shall Provide Orientation/training On The Use And Maintenance Of The Ambulance, Medical Equipment And Instruments On A Schedule To Be Agreed Upon By Procuring Entity And The Winning Bidder. · The Supplier Shall Submit/provide The Following To The End User: > Operator’s Manual In English Language For The Ambulance, Medical Equipment And Instruments. > Certification Of Inclusive Preventive Maintenance Services From 10 Kilometer Up To 40 Kilometer With An Interval Of 10,000kms Or 6 Months Whichever Comes First At Any Manufacturer’s Service Center Branches In Central Visayas. > Warranty Certificate For Three (3) Years On Parts And Services For The Ambulance. The Manufacturer/dealer Shall Either Repair Or Replace Any Item Or Part In The Ambulance That Is Found To Be Defective In Material Or In Workmanship Under Normal Use. The Warranty Period Shall Commence From The Date Of Acceptance By The End-user After Testing And Commissioning. The Warranty Certificate Shall Include The Following: · That The Warranty For The Vehicle Shall Not Be Affected In Case A Change Of Dealer Occurs. That If The Ambulance Is Unable To Return To The Service Center During The Warranty Period, The Manufacturer/dealer Shall Provide Mechanics And/or Technicians That Can Perform On-site Service And Maintenance, Provided That The End User Will Shoulder The Travel Expenses. · Warranty Certificate For Two (2) Years On Parts And Services For Medical Equipment, Instruments And Ambulance Accessories. The Supplier Shall Either Repair Or Replace Any Item Or Part In The Said Equipment That Is Found To Be Defective In Material Or In Workmanship Under Normal Use. The Warranty Period Shall Commence From The Date Of Acceptance By The End-user After Testing And Commissioning. The Warranty Certificate Shall Include The Following: > The Bidder Shall Conduct The Necessary Corrective Maintenance Within Fifteen (15) Calendar Days Upon Notification Of Equipment Breakdown From The End-user. > The Bidder Shall Have The Primary Responsibility And Accountability To Ensure That In Case Of Defects, The Vehicle, Equipment, Instruments And/or Peripherals Are Appropriately Repaired Or Replaced And Shall Be In Good Working Condition Thereafter. · At Least Three (3) Years Validity Of The Vehicle From Land Transportation Office Region 7 (lto Ro7) Registration With Red Plate. This Is To Allow Easy Accessibility By The Recipient Lgus For The Processing And Transfer Of The Documents. · Third Party Liability (tpl) Vehicle Insurance For One (1) Year And Comprehensive Gsis Vehicle Insurance For One (1) Year. · Delivery > Delivery Schedule: Within 90 Calendar Days Upon The Receipt Of Purchase Order > Upon Delivery, Each Ambulance Shall Undergo Preliminary Physical Inspection By The Inspection Team Of The Procuring Entity To Ascertain The Physical Condition And Acceptability Of The Units. All Medical Equipment, Instruments, Ambulance Accessories And Peripherals Must Be Functioning And Must Have No Physical Damage. > All Land Ambulance Units Shall Be Filled Up With Crude Diesel At Full Tank Capacity Upon Delivery. · Terms And Conditions: > Supplier Must Not Have Any Pending Or Incomplete Delivery, Installation, Training And Demonstration Beyond The Delivery Period Indicated In The Purchase Order With Any Existing Doh-cvchd Projects. > The Supplier Must Coordinate With The Equipment Unit Head And Supply Officer On The Schedule Of The Delivery, Completion Of Training & Demonstration In Order To Facilitate Inspection Of The Doh Cvchd Inspection Team. Payment Will Only Be Made After Delivery And Installation. > Demonstration, Training & Completion Of The Accessories And Equipment Should Be Within 5 Days After The Delivery Of The Equipment. O *recipient Facility Shall Sign The Ptr Only If The Supplier Fully Complied With The Above The Supplier Shall Conduct Comprehensive Demonstration & Training For Staff And Support Services Till Familiarity With The Unit. A Copy Of The Certificate Of Training And Documentation During The Training Session Shall Be Provided To The End Users And Supply Office.