Electrical Tenders

Details: Description Invitation To Bid Ib-cw-026-2025 For 25lk0046 - Construction Of Davao City Sub-deo Equipment Management Division (emd), Panacan, Davao City The Department Of Public Works And Highway Davao City 3rd District Engineering Office, Through The Fy 2025 Dpwh Infrastructure Program Intends To Apply The Sum Of Php. 67,550,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For 25lk0046- Construction Of Davao City Sub Deo Equipment Management Division (emd), Panacan, Davao City. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Department Of Public Works And Highways Davao City 3rd District Engineering Office, Thru Its Bids And Awards Committee (bac), Invites Bids For The Hereunder Works: Contract Id : 25lk0046 Contract Name: Construction Of Davao City Sub-deo Equipment Management Division (emd), Panacan, Davao City Location : Davao City Scope Of Work: Other General Requirements, Earthwork, Reinforced Concrete, Finishings And Other Civil Works, Electrical, Mechanical Approved Budget For The Contract (abc):67,550,000.00 Contract Duration : 300 Calendar Days Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instruction To Bidders). 2. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License For Size Range Of Atleast Medium A. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00pm Or At The Dpwh Website. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184). 4. Interested Bidders May Obtain Further Information From The Department Of Public Works And Highway Davao City 3rd District Engineering Office And Inspect The Bidding Documents At Procurement Office, 2nd Floor, Dpwh Davao City 3rd Deo During Weekdays From 8:00 Am To 5:00pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 27, 2024 December 18, 2024 Until 10:00 A.m. From Given Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php. 50,000.00. 6. The Bidding Documents May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 7. The Department Of Public Works And Highways Davao City 3rd District Engineering Office Will Hold A Pre-bid Conference On December 04, 2024 At 10:00 A.m. At The Conference Room, 2nd Floor,dpwh Davao City 3rd Deo And/or Through Videoconferencing/via Youtube Livestreaming Of The Official Page Dpwh Davao City 3rd Deo Procurement Ls Webcasting Via Zoom,which Shall Be Open To Prospective Bidders. 8. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In Bds Itb Clause 22. For Manual Submission, Bid Proposals May Be Submitted Through An Authorized Representative And Presentation Of Two (2) Valid Identification Issued By Government Institution. 9. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_davaocity3@dpwh.gov.ph For Electronic Submission On Or Before December 18, 2024 At 10:00 A.m. Bids Received Beyond The Specified Time Shall Be Marked As “late Bid” And Shall No Longer Be Opened. 10. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. 11. Bid Opening Shall Be On December 18, 2024 Immediately After The Deadline For The Submission Of Bid, At The Conference Room, 2nd Floor, Dpwh Davao City 3rd Deo And Via Youtube Livestreaming Of The Official Page Dpwh Davao City 3rd Deo Procurement Ls Or Through Zoom. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 12. The Department Of Public Works And Highways (davao City 3rd District Engineering Office) Thru Bids And Awards Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Junellen G. Cañedo Acting Head, Procurement Unit Dpwh Davao City 3rd District Engineering Office Dpwh-emd Compound, Km. 13, Panacan, Davao City, Region Xi Telephone: (082) 308 – 1138 Email : Canedojg2@dpwh.gov.ph Andrew A. Pangan Bac Chairperson Dpwh Davao City 3rd District Engineering Office Dpwh-emd Compound, Km. 13, Panacan, Davao City, Region Xi Dpwhbac.davaocity3rd@gmail.com Date Of Posting November 27, 2024 Dpwh & Philgeps Websites Bulletin Board, Dpwh Davao City 3rd Deo Compound

Details: Background And Site Description the Agricultural Research Service (ars) Is The U.s. Department Of Agriculture’s Chief Scientific In-house Research Agency. Our Job Is Finding Solutions To Agricultural Problems That Affect Americans Every Day From Field To Table. the Performance Of These Activities Results In The Generation Of Diversified Chemical And Biological Wastes Of Varying Quantities And Toxicities. Wastes May Contain Pyrophoric, Explosive, Reactive, Or Toxic Substances And Compressed Gases. Some Of The Chemicals Are Dangerous Due To Their Sensitivity To Shock, Friction, Or Pressure; Other Are Reactive Or Unstable For A Variety Of Reasons. The Ars Recognizes Its Responsibilities To Ensure Facilities Are Following Existing Regulations Imposed Upon Entities Which Generate, Transport, Store, Treat, And Dispose Of Hazardous Chemical Wastes. The Agency Has A Need For Hazardous Waste Disposal Services, As Well As Non-hazardous Waste Disposal Services. With 47 Research Units At 21 Locations, And Several Additional Worksites, Where Ars Employees Are Located Throughout Eight States (hawaii, Washington, Oregon, California, Idaho, Nevada, Arzona And Utah), The Pacific West Area (pwa) Is The Largest And Most Diverse Of The Eight Areas In Ars. For More Information On The Pwa Go To Https://ars.usda.gov/pacific-west-area/. description Of Work this Requirement Would Be For An Area-wide Hazardous Waste Indefinite Delivery – Indefinite quality (idiq) Contract. Fixed-price Task Orders Would Be Issued Off This Contract For Hazardous Waste Disposal Throughout The Pwa Service Area. The Contractor Shall Provide Hazardous Waste Disposal Services. Following Is Only An Example Of What Types Of Waste Would Be Included Under Coverage Of The Idiqs: waste Flammable Liquids, Corrosive waste Corrosive Liquid, Acidic, Organic waste Corrosive Liquid, Basic, Inorganic environmentally Hazardous Substance, Liquid, N.o.s. (benzyl Benzoate, Dibutyl Phthalate) waste Toxic, Liquids, Organic waste Flammable Liquids, Toxic waste Toxic Solid, Inorganic waste Hydrogen Sulfide waste Organometallic Substance, Liquid, Pyrophoric, Water-reactive waste Phosphorus Oxychloride waste Sodium Borohydride waste Toxic By Inhalation Liquid, Flammable, Corrosive waste Toxic By Inhalation Liquid, Flammable waste Water-reactive Liquid, Corrosive air, Compressed (lecture Containers) batteries, Dry Containing Potassium Hydroxide Solid batteries, Wet, Filled With Acid batteries, Wet Non-spillable carbon Dioxide (lecture Containers) compressed Gas, N.o.s. (calibration Gas/lecture Containers) ethane (lecture Containers) nitrogen, Compressed (lecture Containers) non-hazardous Waste, Solid oxygen, Compressed (lecture Containers) propane (lecture Containers) universal Waste (electrical Waste) universal Waste (fluorescent Lamps) universal Waste (spent Light Bulbs) any Costs Associated With High Hazardous Waste (chemist, Research Classification, Opening, Testing, Reduction, Stabilization) the Resultant Contract Could Cover The Entire Area Or Be Divided Into Geographical Areas. Multiple Idiqs Could Be Awarded And Task Orders Competed Among Contract Holders. The Results Of This Sources Sought Will Help Determine The Best Geographical Acquisition Strategy And Small Business Set-aside, If Any. The Anticipated Ceiling Of The Entire Idiq Is $5,000,000.00 For Five One-year Ordering Periods. this Is A Sources Sought (ss) Notice Only. This Is Not A Solicitation For Proposals, Proposal Abstracts, Or Quotations. This Ss Is Issued For Information And Planning Purposes Only As Part Of Usda Ars Market Research And Does Not Itself Constitute A Request For Proposal (rfp). This Requirement Is Covered Under Naics Code 562112. The Purpose Of This Notice Is To Obtain Information Regarding The Availability And Capability Of Qualified Sources; Small Businesses; Hubzone Small Business; Service-disabled Veteran-owned Small Business; 8(a) Small Business; Veteran-owned Small Business; Woman-owned Small Business; Small Disadvantaged Businesses; Or Large Businesses. It Will Also Serve To Ascertain The Ability Of Hazardous Waste Removal Companies To Serve The Entire Pwa Or Parts Of It. Responses To The Information Requested Will Assist The Government In Determining The Appropriate Acquisition Method, Including Whether A Set-aside Is Possible. the Government Does Not Intend To Make An Award Based On Responses To This Inquiry. This Notice Does Not Constitute A Commitment By The Government. capability Statement all Information Submitted In Response To This Announcement Is Voluntary, And The Government Will Not Pay For Information Requested, Nor Will It Compensate Any Respondent For Any Cost Incurred In Developing Information Provided To The Government. Business Concerns That Possess The Capabilities Necessary To Undertake This Work Should Submit Complete Documentation Of Their Capabilities To The Contracting Officer. Capability Statements Shall Include The Contractors Contact Point To Discuss Their Response. the Capability Statement Should Include: acknowledgement The Company Is Legally Licensed To Provide Hazardous Waste Removal Services. indication Of Their Size Standards In Accordance With The Small Business Administration. at Least Three Previous Requirements That Were Performed Within The Pwa That Are Within Thescope Of This Requirement; Include A Discussion Of The Contract Type, Delivery Method, Duration, Etc. indicate Which Of The Eight States, If Not All, That Encompass The Usda Ars Pwa That Thecompany’s Legally Able And Willing To Perform Services In. include The Firm’s Sam Unique Entity Id (uei) Number And Cage Code. any Other Information Considered Relevant To This Requirement. the Government Requests That No Proprietary, Classified, Confidential, Or Sensitive Informationshould Be Included In The Response. responses Are Limited To One Digital Pdf Submission Not To Exceed Ten (10) Pages. Please Use Theemail Subject Line “sources Sought Usda Ars Pwa Haz-waste Removal Services Idiq”. any Contractor Responding To This Notice Should Ensure Its Response Is Complete And Sufficiently Detailed To Allow The Government To Determine Their Qualifications To Perform The Work. Respondents Are Advised That The Government Is Under No Obligation To Acknowledge Receipt Of The Information Received Or Provided Feedback To Respondents With Respect To Any Information Submitted. After Review Of The Responses Received, A Solicitation May Be Published On Sam.gov Depending On The Responses Received. all Responses To This Ss Must Be Received By The Notice’s Poc By The Deadline In Order To Be Considered. Responses May Not Be Returned. Responders Are Solely Responsible For All Expenses Associated With Responding To This Inquiry. Do Not Submit Pricing Information In Response To This Ss. the Notice Poc Is Theodore Blume: Theodore.blume@usda.gov

Details: Description Section I. Invitation To Bid Da8-goods-2025-16 (id No. Bt-25-goods-nupap-57204-0002) 1. The Department Of Agriculture-regional Field Office No. 8, Through The Nupap-2025 Current Fund Intends To Apply The Sum Of One Million Thirty-two Thousand Pesos (p1,032,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For “supply And Delivery Of Hydroponics Growing Kit” Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Department Of Agriculture-regional Field Office No. 8, Undertakes The Bidding Of This Procurement Project As “short-of-award.” Hence, The Notice Of Award To The Winning Bidder Shall Be Issued After Enactment By The Congress Of The General Appropriation Act (gaa) For 2025. 3. The Department Of Agriculture-regional Field Office No. 8, Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within 30 Calendar Days Upon Receipt Of Ntp. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. Qty Uom Item Description Unit Cost Total Cost 24 Unit Supply And Delivery Of Hydroponics Growing Kit 43,000.00 1,032,000.00 Hydroponics Growing Box With 15 Holes Specifications: Hydroponics Box, 35" X 17" X 7 1/2" 5 Pcs Seedling Tray, (104 Holes) Made Of Plastic Materials Hydroponics Solution: A And B (snap Solution) Packaging: Liter/set (500 Ml A And 500 Ml B) Tds Meter - Total Dissolved Solids Meter Specifications: 3n1 Multifunctional; Ec ( Electrical Conductivity); Tds Temperature Test Automatic Temperature Compensation Shift Between Tds And Conductivity Packaging: 1 User Manual, 1 Leather Bag Lettuce Seeds Specifications: 2 Cans, 25 Grams/can Coco Peat, 10 Kilos/pack Styro Cup, 8oz (25 Pcs/pack) Terms And Conditions: A. During The Opening Of Bids, Bidder/s Shall: 1. Comply With All Requirements Required In The Checklist; 2. Submit Sample Picture Of The Hydroponic Set Up Following The Specifications. B. Winning Bidder/s Shall: 1. Deliver New Items To Abuyog Experiment Station, Brgy. Balinsasayao, Abuyog, Leyte. 2. Deliver The Items 30 Calendar Days Upon Receipt Of Ntp. 3. Inform The Gss Section And End User One (1) Week Before The Delivery Schedule; 4. Present Samples Of All The Items, Before Delivery. C. Any Delay Of Delivery Of The Item Shall Be Subjected To Liquidated Damages Equivalent To 1/10 Of 1% Of The Contract Price Per Day Of Delay Of The Undelivered Items; D. Winning Bidder Shall Conduct A Training On Hydroponics Operation And Maintenance For Each Beneficiary. E. Payment Shall Be Made After Complete Delivery, Inspection, Acceptance And Submission Of All Necessary Documents Required For The Processing Of The Payment. F. Winning Bidder Shall Submit A Snapshot Of A Business Bank Account (preferably Landbank) To Effect Payment. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. Bidding Is Open To All Interested Bidders, Whether Local Or Foreign, Subject To The Conditions For Eligibility Provided In The Irr Of Ra 9184. 5. Prospective Bidders May Obtain Further Information From Department Of Agriculture – Regional Field Office 8 And Inspect The Bidding Documents At The Address Given Below During Office Hours From 8:00am To 5:00 Pm. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 30, 2024 To January 21, 2025 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee, Pursuant To The Latest Guidelines Issued By The Gppb In The Amount Of Five Thousand Pesos Only (p5,000.00). 7. The Department Of Agriculture-rfo 8 Will Hold A Pre-bid Conference On January 07, 2025, 9:00 Am (bac-secretariat Time) At Da8 Bac Office, 4th Floor Green Bldg., Kanhuraw Hill, Tacloban City And Through Face To Face Or Video Conferencing Or Webcasting Via Google Meet, Which Shall Be Open To Prospective Bidders. 8. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before January 21, 2025 9:00 Am (bac-secretariat Time). Late Bids Shall Not Be Accepted. 9. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 10. Bid Opening Shall Be On January 21, 2025, 9:00 Am (bac-secretariat Time) At Da8 Bac Office, 4th Floor Green Bldg., Kanhuraw Hill, Tacloban City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend Either Physically Or Through Video Conferencing Via Google Meet. 11. The Department Of Agriculture-rfo 8 Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. Da Does Not Condone Any Form Of Solicitation On Any Prospective Winning And Losing Bidders By Any Of Our Staff/employees Or Any Other Party. Any Sort Of This Kind Shall Be Reported Immediately To The Office Of The Secretary Or The National Bureau Of Investigation (nbi) For Entrapment And Proper Investigation. 13. For Further Information, Please Refer To: Martins A. Alde Head, Bac-secretariat Department Of Agriculture, Regional Field Office-8 Kanhuraw Hill, Tacloban City Darfo8.bacsec@gmail.com Mobile No. 09061694318 Easternvisayas.da.gov.ph 14. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.philgeps.gov.ph Or Easternvisayas.da.gov.ph Approved By: (sgd.) Larry U. Sultan, Jd Chairman, Bids And Awards Committee

Description: The Defense Logistics Agency (dla) Maritime Norfolk At Norfolk Naval Shipyard (nnsy) Intends To Award A Firm Fixed Price (ffp) Single Award Contract With Lowest Price Technically Acceptable (lpta) Evaluation Factors For The Item Listed Below. The Required Item Is For Commercial Items Prepared In Accordance With The Information In Far Part 13 And Far Subpart 12.6, As Supplemented With The Additional Information Included In This Notice. the Contract Line Items (clins) Are As Follows: hyd-mech S-23p Band Saw Quantity: 1 U/i: Ea capacity Rectangular (h X W) Round 90° 16" X 20" 16" 45° 16" X 14" 14" 30° 16" X 9-1/2" 9-1/2" blade Size: 1-1/4" X 16' 10" blade Drive: 8.8 Hp Vfd machine Voltage: 240v /3 Ph variable Vise Pressure adjustable Work Stop – 34” coolant Drip Pan – For Idler Conveyor blade Speed: 75-330 Sfm coolant Tank – Built In Coolant Drawer With Centrifugal Pump And 9 Us Gal Capacity work Load: 5,000 Lbs. machine Weight 2.900 Lbs. table Height: 33" cast Iron Blade Guide Arms. Idler Side Guid Arm Adjustable And Supported By Linear Rail. dimensions (w X L X H) 101” X 80” X 61” laser Light work Light mechanical Band Tensioning With Digital Readout 43" Material In-feed Roller Table And 19-1/4" Out Feed Table blade Breakage Switch cast Iron Band Wheels pre-set Replaceable Carbide Guide Inserts flood Coolant With Wash Down Hose safety Door Interlocks filler Plates For 5’ Idler Conveyor Below The Frame type 1 – 5’ In Feed/out Feed Idler Conveyor (26” W X 35” H) Material Support Rollers To Be Installed Below The Frame replaceable Blade Brush replaceable Carbide Guide Inserts miter Scale For The Head Miter Position In 1 Degree Increments With Cam Lock Brake Locking Mechanism steel Base semi-automatic Operator Plc Control Equipped With A Digital Lcd Display, Shall Show Machine Mode, Pieces Cut, Blade Speed, Blade Tension, Amperage Draw, Cut Duration, Overall Machine Run Time, And Head Position. full Capacity, Full Stroking Hydraulic Material Vise swinging, Heavy-duty, Cast-iron Saw Head That Can Swing Up To 60 Degrees In One Direction hydraulic Positive Down Feed Sawing Head With Infinite Down Feed Adjustments hydraulic Positive Downfeed – Dual Down Feed System Capable Of Controlling Both Feed Rate And Feed Force Parameters quality Assurance Provisions - Inspection And Acceptance Of The Supplies, Performed At Destination By Code 983 And Shall Consist Of Type And Kind; Condition; Operability, If Readily Determinable; Preservation; Packaging. preservation, Packaging And Packing – The Equipment Shall Be Packaged, Packed And Preserved For Shipment To Reach Ultimate Destination Undamaged. Package Shall Be Prominently Marked “not For Outside Storage”. Yellow Packaging, Packing, Preservation And Marking Are Prohibited. additional Requirements: nameplate: A Nameplate Shall Be Permanently And Securely Attached To Each Machine The Information Provided On The Plate Shall Be As Listed Below. nomenclature manufacturer's Name manufacturer's Model Designation manufacturer's Serial Number power Input (volts, Total Amps, Phase, Frequency) amp Rating Of Largest Motor short Circuit/over-current Protection Rating contract Number Or Order Number national Stock Number Or Plant Equipment Code date Of Manufacture operating And Maintenance Manual: Machines Shall Be Provided With Operating And Maintenance Manual (o&m), Electrical Manual, Mechanical Manual & Schematics Three (3) Each Shall Be Provided With The Machine And One (1) Each Searchable Electronic Copy (pdf) Shall Be E-mailed To Tpoc. verification Test: After Delivery The Contractor Shall Test Run The Machines At The Site To Ensure Conformance With This Purchase Description. warranty: These Machines Shall Be Warranted Against Any Defects In Material, Parts, And Workmanship For 12 Months After The Date Of Installation With Labor Provided By Dealer. Additional Parts Are To Be Warranted For Two (2) Years. installation: location: Machines Shall Be Installed Inside Norfolk Naval Shipyard, Portsmouth, Va 23709. training: The Contractor Shall Provide Training To Familiarize Norfolk Naval Shipyard Personnel With The Equipment And To Help Ensure Reliable Performance And Maximum Service Life, During Normal Usage. operator / Programmer On-site Training: Training Shall Be Provided At The Receiving Activity. Training Shall Include Preparation Of Part Programs, And Preparation Of Equipment For Safe Operation. The Trainees Shall Be Provided Instruction For All Aspects Of Machining Operations. Trainees Shall Be Provided Instruction For The Care, Use And Operation Of All Attachments And Accessories. Training Shall Be Provided For Three (3) Operators/programmers. The Training Period Shall Not Be Less Than Three (1) Consecutive, Eight (8) Hour Workday. A Training Manual (which Could Be An Additional Operator's Manual) Shall Be Provided For Each Student. entry Requirements: All Personnel Expected To Visit Nnsy Shall Be Us Citizens. Contractors/sub-contractors Including Truck Drivers Shall: 30 Days Before Arrival: Contractor Shall Provide Secnav 5512 Data On All Personnel Expected To Visit Nnsy To The Tpoc. This Shall Include List Of All Personnel Expected To Visit, Identifying Those That Require Secnav 5512 Forms & Those With Existing Valid Base Passes. All Personnel Expected To Visit Nnsy Shall Be Us Citizens. All Personnel Shall Provide Two Forms Of Identification. Accepted Required Identity Documentation For Proof Of Us Citizenship, Us Birth Certificate, Us Passport, Certificate Of Citizenship, Birthright Citizenship, Certificate Of Naturalization, Birth Abroad For Us Citizens. The Tpoc Shall Provide Secnav 5512 Forms Upon Request. The Tpoz Will Endorse The Secnav 5512 Form And Forward To The Nnsy Pass Office. vehicle Entry: The Contractor Shall Display The Company Name Of Each Door Of The Contractor’s Vehicles In A Manner And Size That Is Clearly Visible. All Contractor Vehicles Shall Display A Valid State License Plate That Complies With State Vehicle Code With Company’s Name Clearly Displayed On The Sides On Vehicle. Contract Vehicles Shall Meet All Other Requirements Of The State Vehicle Code, Such As Safety Standards, Proof Of Insurance And State Registration. Contract Vehicles Shall Have Insurance And Registration In The Company’s Name. Passes Will Be Issued For Vehicles To Enter The Shipyard. A Separate Pass Is Required For Entering The Cia. There Are Available Parking Spots Near Each Building, Including In The Cia. Unloading Can Be Accomplished At High Bay Door Loading And Unloading Zones However, The Loading And Unloading Zones May Not Be Near The Equipment For Each Building. portable Electronic Dive (ped): In Accordance With Comsublant/comsubpacinst 2075.1c, The Use Of Portable Electron Devices (peds) While In Or On Department Of Navy Controlled Industrial Areas Are Prohibited. A Portable Electronic Device (ped) Is Defined As Any Non-stationary Electronic Apparatus With Singular Or Multiple Capabilities Of, But Not Limited To Recording, Storing, And/or Transmitting Data, Voice, Video, Or Photo Images E.g.: Cell Phones, Laptops, Tablets And Wearable Devices Such As Fitness Bands And Smart Watches. Non-camera Cell Phones Are Acceptable (feature Phones). Where A Laptop Computer Is Required For Trouble-shooting And Machine Programming Purposes, Contractor Must Inform Tpoc No Later Than Two (2) Weeks Prior To Visit To Allow Time To Schedule Inspections And Vetting From Nnsy It Department. safety Or Security: Contractor Will Need Cia Access And Ppe. “per Far 22.102-1(a) Entitled “safety”, Contractors Are Hereby Informed That Their Employees Or Representatives Present On Property Under Norfolk Naval Shipyard Cognizance Must Follow Federal And State Osha Requirements And Norfolk Naval Shipyard Oshe Program Manual, Navshpydnorinst P5090.2 Requirements Or Safety Requirements For Site Specific Location Of The Contract.” critical Time Constraints: The Installation And Training Shall Be Performed Between The Hours Of 7:20 Am And 3:50 Pm Excluding Any Federal Holidays. installation Responsibilites government provide And Install Anchor Bolts And Nuts. connect Machine To The Provided Utilities Hook-up. material For Performance Testing At Gover provide Utilities Hook-up Within 20 Feet Of The Machinenment Facility contractor level And Align Machine. provide All Necessary Tools, Gages, And Instrumentation Necessary To Perform The Required Test. provide And Charge All Systems With Fluids In Accordance With Manufacturer’s Instructions. the Requirement Will Be Solicited As A Total Small Business Set Aside. The Naics Code Applicable To This Procurement Is 332216, Saw Blade And Handtool Manufacturing With A Size Standard Of 750 Employees. The Product Service Code Is 3405. the Anticipated Delivery Date For This Acquisition Is 30 Days After Contract Award. The Solicitation, Any Documents Related To This Procurement, And All Amendments Issued Will Be In Electronic Form Only. the Solicitation Number Is Spmym125q0034 And It Is Expected To Be Available On Or About 21 January 2025 And Posted To Sam.gov, Https://sam.gov/ Quotes Will Be Due By 5:00 Pm Est On 24 January 2025. Responses To The Solicitation Notice Shall Be Emailed To The Attention Of Monica Richardson As Monica.richardson@dla.mil Please Make Sure That The Solicitation Number (spmym125q0034) Is Included In The Subject Line Of Any Email Correspondence. Emails Without Subject Lines Will Not Be Read Because Of Security Issues. potential Offerors Are Hereby Notified That The Solicitation And Any Subsequent Amendments Will Only Be Available By Downloading The Documents At Www.sam.gov (contracting Opportunities). The Government Is Not Responsible For Inability Of The Offeror's To Access Solicitation Documents Posted. Prospective Offeror's Should Also Register On The Interested Vendor List Under Spmym125q0034. No Telephone Or Fax Requests Will Be Accepted, And No Hardcopy Solicitation/amendment Will Be Mailed Or Faxed. all Responsible Sources May Submit A Proposal Which May Be Considered By The Government. By Submitting A Quote, The Offeror Will Be Self-certifying That Neither The Principal Corporate Officials Nor Owners Are Currently Suspended, Debarred, Or Otherwise Ineligible To Receive Contracts From Any Federal Agency. Failure To Do So May Represent Grounds For Refusing To Accept The Proposal. By Submission Of A Proposal, The Offeror Acknowledges The Requirement That A Prospective Awardee Must Be Registered In The System For Award Management (sam) Database Prior To Award, During Performance, And Through Final Payment Of Any Contract Resulting From The Solicitation, Except For Awards To Foreign Vendors For Work To Be Performed Outside The United States. Lack Of Registration In The Sam Database Will Make An Offeror Ineligible For Award. Offerors May Obtain Information On Registration And Annual Confirmation Requirements By Calling 1-866-606-8220, Or Via The Internet At Https://www.sam.gov. All Questions Shall Be Submitted In Accordance With The Solicitation, Dates And Procedures. Please Direct All Questions Regarding This Requirement To Monica Richardson At Monica.richardson@dla.mil.

Purchaser Name: KONSTANTIN FOTINOV VOCATIONAL HIGH SCHOOL OF ELECTRICAL ENGINEERING AND ELECTRONICS | Selection of a SMR contractor for the establishment of a Stem Center in the building of the PGE "Konstantin Fotinov" According to Procedure Bg-rrp-1.015 - "school Stem Environment" According to the National Plan for the Recovery and Sustainability of the Republic of Bulgaria, financed by the European Union - Nextgenerationeu

Purchaser Name: Turkish Electrical Communications A.S. General Directorate (TEIAS) 2nd Regional Directorate | Itm.16.19 Reference, 380 Kv Lapseki 3 – Sütlüce 3 – İzmit Gulf Passage Interface Centers Completion

Purchaser Name: Turkish Electrical Communications A.S. General Directorate (TEIAS) 11th District Directorate | Enlargement of Transformer Foundation and Construction of Buttress Foundation in Çinkur Transformer Center

Purchaser Name: HRISTO SMIRNENSKI PROFESSIONAL HIGH SCHOOL OF MECHANICAL AND ELECTRICAL ENGINEERING | "Delivery and Installation of Equipment for the Construction of a Stem Environment for the Needs of the Project "Hristo Smirnenski", Gr. Knezha", by Separate Positions"

Details: Introduction the Naval Air Systems Command (navair) Intends To Issue A Contract With Sikorsky Aircraft Corporation, A Lockheed Martin Company (sikorsky), Under The Authority Of 10 U.s.c. 3204(a)(1) As Implemented By Federal Acquisition Regulation (far) 6.302-1, For The Procurement Of Products And Services Required To Sustain All Vh Presidential Helicopter Platforms (vh-3d, Vh-60n, And Vh-92a® Aircraft), Including Flight Test Aircraft, Trainer And Test Assets. disclaimer this Sources Sought Is For Informational Purposes Only. It Is A Market Research Tool Being Used To Determine Potential And Eligible Businesses Capable Of Providing The Supplies/services Described Herein, Prior To Determining The Method Of Acquisition And Issuance Of A Request For Proposal. This Is Not A Request For Proposals. It Does Not Constitute A Solicitation And Shall Not Be Construed As A Commitment By The Government. Responses In Any Form Are Not Offers And The Government Is Under No Obligation To Award A Contract As A Result Of This Announcement. The Government Is Not Committed Nor Obligated To Pay For The Information Provided, And No Basis For Claims Against The Government Shall Arise As A Result Of A Response To This Sources Sought. Any Information Submitted By Respondents To This Sources Sought Is Strictly Voluntary. anticipated Contract Information anticipated Contract Type: Indefinite Delivery Indefinite Quantity (idiq) With Fixed Price And Cost-type Contract Line Item Numbers (clins). anticipated Award Date: 1st Qtr Fy26 anticipated Period Of Performance: Five (5) Years dpas Priority Rating: Dx required Capabilities this Effort Is For The Procurement Of Products And Services Required To Sustain The Vh Aircraft (vh-3d, Vh-60n And Vh-92a), Test Aircraft And Training Assets. To Accomplish The Full Scope Of This Effort, The Government Requires Integrated Logistics Support; Sustaining Engineering; Program Management; Repair; Reliability Improvements; Configuration And Obsolescence Management; Material Management And Procurement; Component Overhaul, Repair And Replacement; Overhaul And Rework; Test And Related Test Support; Systems Engineering And Integration Analysis; Physical Security And Systems Security Engineering; On-site Support; And Training Activities. sikorsky Aircraft Corporation, A Lockheed Martin Company (sikorsky), Is The Original Equipment Manufacturer (oem) Of The Vh-3d, Vh-60n, And Vh-92a. Given Sikorsky Is The Oem Of The Vh Platforms (vh-92a Is A Variant Of The Commercial S-92a), Is The Only Source With The Design Expertise, Technical Data, Equipment, And Subject Matter Experts That Can Provide In-depth Support For The Efforts Described Herein. The Government Believes No Other Firm Possesses The Required Proprietary Data And Expertise On This Effort. However, Responsible Sources May Submit A Capability Statement, Which Will Be Considered By The Agency. Any Offer Must Clearly Demonstrate The Capability To Respond To This Requirement Without Detriment To The Vh Presidential Helicopters Program And Must Address The Submission Information Elements Below. eligibility the Applicable Naics Code Is 336411 With A Small Business Size Standard Of 1,500 Employees. The Product Service Code (psc) Is 1520. Businesses Of All Sizes Are Encouraged To Respond; However, Each Respondent Must Clearly Identify Their Business Size. submission Information it Is Requested That Interested Businesses Submit To The Contracting Office A Brief Capabilities Statement Package (no More Than 10 Pages In Length, Single-spaced, 12 Point Font Minimum) Demonstrating Ability To Perform The Tasking Listed Under The Required Capabilities. This Documentation Must Address At A Minimum The Following: company Name; Company Address; Cage Code, Company Business Size, And Point-of-contact (poc) Name, Phone Number, Fax Number, And E-mail Address. company Profile To Include Number Of Employees, Annual Revenue History, Office Location(s), Duns Number, And A Statement Regarding Current Small/large Business Status And Socio-economic Set-aside Status, If Applicable. If You Are A Small Business, Provide An Explanation Of Your Company’s Ability To Perform At Least 50% Of The Tasking Described In Required Capabilities, Either Individually Or Along With Any Combination Of Small Businesses. prior/current Corporate Experience Performing Efforts Of Similar Size And Scope To The Tasking Described Under Required Capabilities Section Within The Last Three (3) Years, Including Contract Numbers, Indication Of Whether As A Prime Or A Subcontractor, Contract Values, Government Point Of Contract With Current Telephone Number, And A Brief Description Of How The Referenced Contract Relates To The Proposed Required Capabilities And Scope Of Performance. management Approach To Staffing This Effort With Qualified Personnel; what Specific Technical Skills Does Your Company Possess Which Ensures Capability To Perform The Tasks? company’s Experience To Operate A Closed-loop Supply Chain System, Meet 100% Readiness, While Complying With Level Iii Restricted Area Security Measures For The Protection Of The Vh Program, Have Personnel To Support Secret, Sensitive Compartmented Information (sci), Top Secret, And Yankee White Access. company’s Prior/current Experience And Demonstrated Knowledge Of Vh Loads And Dynamics, Weight And Balance, Electrical, Flight Control And Hydraulic Systems, Human Systems, Performance Analysis, System Safety, And E3 To Provide Adequate Analysis In Support Engineering Support. company’s Prior/current Experience And Ability To Analyze Vh Enhancements To Determine If They Necessitate Updates To Any Flight Certification And/or Natops Performance Charts. company’s Prior/current Experience And Ability With The Vh Automated Logistics Environment. company’s Ability To Access To Vh (to Include S-92a) Technical Data Support All Elements Of Logistics. provide Any Existing Technical Data Licenses Of Agreements With The Vh Oem For Performance Of Related Tasking Or Provided Documentation, With Concurrence From The Oem, Demonstrating The Ability To Obtain Any Necessary License/agreement For Access To Required Technical Data For This Effort. Documents Submitted In Response To This Requirement Will Not Be Counted Against Any Page Limitations. interested Parties Are Advised Against Submitting A Capability Statement That Merely Mimics Information In This Notice, Provides Brochure-like Information, Or Provides General Information. Acknowledgement Of Receipt Will Be Provided. All Information Submitted Will Be Adequately Safeguarded From Unauthorized Disclosure In Accordance With Far 15.207. responses To This Sources Sought, Including Any Capabilities Statement, Shall Be Electronically Submitted Via Email To Brittany Reynolds At Brittany.s.reynolds3.civ@us.navy.mil, In Either Microsoft Word Or Portable Document Format (pdf). The Deadline For Response To This Request Is 4:00 P.m., Eastern Standard Time, 22 January 2025. all Data Received In Response To This Sources Sought That Is Marked Or Designated As Corporate Or Proprietary Will Be Protected. Information And Materials Submitted In Response To This Request Will Not Be Returned. Classified Material Shall Not Be Submitted. No Phone Calls Will Be Accepted. all Questions Must Be Submitted Via E-mail. The Government Is Not Committed Nor Obligated To Pay For The Information Provided, And No Basis For Claims Against The Government Shall Arise As A Result Of A Response To These Sources Sought. vh-92a And Patriot Are Registered Trademarks Of The Department Of The Navy. introduction the Naval Air Systems Command (navair) Intends To Issue A Contract With Sikorsky Aircraft Corporation, A Lockheed Martin Company (sikorsky), Under The Authority Of 10 U.s.c. 3204(a)(1) As Implemented By Federal Acquisition Regulation (far) 6.302-1, For The Procurement Of Products And Services Required To Sustain All Vh Presidential Helicopter Platforms (vh-3d, Vh-60n, And Vh-92a® Aircraft), Including Flight Test Aircraft, Trainer And Test Assets. disclaimer this Sources Sought Is For Informational Purposes Only. It Is A Market Research Tool Being Used To Determine Potential And Eligible Businesses Capable Of Providing The Supplies/services Described Herein, Prior To Determining The Method Of Acquisition And Issuance Of A Request For Proposal. This Is Not A Request For Proposals. It Does Not Constitute A Solicitation And Shall Not Be Construed As A Commitment By The Government. Responses In Any Form Are Not Offers And The Government Is Under No Obligation To Award A Contract As A Result Of This Announcement. The Government Is Not Committed Nor Obligated To Pay For The Information Provided, And No Basis For Claims Against The Government Shall Arise As A Result Of A Response To This Sources Sought. Any Information Submitted By Respondents To This Sources Sought Is Strictly Voluntary. anticipated Contract Information anticipated Contract Type: Indefinite Delivery Indefinite Quantity (idiq) With Fixed Price And Cost-type Contract Line Item Numbers (clins). anticipated Award Date: 1st Qtr Fy26 anticipated Period Of Performance: Five (5) Years dpas Priority Rating: Dx required Capabilities this Effort Is For The Procurement Of Products And Services Required To Sustain The Vh Aircraft (vh-3d, Vh-60n And Vh-92a), Test Aircraft And Training Assets. To Accomplish The Full Scope Of This Effort, The Government Requires Integrated Logistics Support; Sustaining Engineering; Program Management; Repair; Reliability Improvements; Configuration And Obsolescence Management; Material Management And Procurement; Component Overhaul, Repair And Replacement; Overhaul And Rework; Test And Related Test Support; Systems Engineering And Integration Analysis; Physical Security And Systems Security Engineering; On-site Support; And Training Activities. sikorsky Aircraft Corporation, A Lockheed Martin Company (sikorsky), Is The Original Equipment Manufacturer (oem) Of The Vh-3d, Vh-60n, And Vh-92a. Given Sikorsky Is The Oem Of The Vh Platforms (vh-92a Is A Variant Of The Commercial S-92a), Is The Only Source With The Design Expertise, Technical Data, Equipment, And Subject Matter Experts That Can Provide In-depth Support For The Efforts Described Herein. The Government Believes No Other Firm Possesses The Required Proprietary Data And Expertise On This Effort. However, Responsible Sources May Submit A Capability Statement, Which Will Be Considered By The Agency. Any Offer Must Clearly Demonstrate The Capability To Respond To This Requirement Without Detriment To The Vh Presidential Helicopters Program And Must Address The Submission Information Elements Below. eligibility the Applicable Naics Code Is 336411 With A Small Business Size Standard Of 1,500 Employees. The Product Service Code (psc) Is 1520. Businesses Of All Sizes Are Encouraged To Respond; However, Each Respondent Must Clearly Identify Their Business Size. submission Information it Is Requested That Interested Businesses Submit To The Contracting Office A Brief Capabilities Statement Package (no More Than 10 Pages In Length, Single-spaced, 12 Point Font Minimum) Demonstrating Ability To Perform The Tasking Listed Under The Required Capabilities. This Documentation Must Address At A Minimum The Following: company Name; Company Address; Cage Code, Company Business Size, And Point-of-contact (poc) Name, Phone Number, Fax Number, And E-mail Address. company Profile To Include Number Of Employees, Annual Revenue History, Office Location(s), Duns Number, And A Statement Regarding Current Small/large Business Status And Socio-economic Set-aside Status, If Applicable. If You Are A Small Business, Provide An Explanation Of Your Company’s Ability To Perform At Least 50% Of The Tasking Described In Required Capabilities, Either Individually Or Along With Any Combination Of Small Businesses. prior/current Corporate Experience Performing Efforts Of Similar Size And Scope To The Tasking Described Under Required Capabilities Section Within The Last Three (3) Years, Including Contract Numbers, Indication Of Whether As A Prime Or A Subcontractor, Contract Values, Government Point Of Contract With Current Telephone Number, And A Brief Description Of How The Referenced Contract Relates To The Proposed Required Capabilities And Scope Of Performance. management Approach To Staffing This Effort With Qualified Personnel; what Specific Technical Skills Does Your Company Possess Which Ensures Capability To Perform The Tasks? company’s Experience To Operate A Closed-loop Supply Chain System, Meet 100% Readiness, While Complying With Level Iii Restricted Area Security Measures For The Protection Of The Vh Program, Have Personnel To Support Secret, Sensitive Compartmented Information (sci), Top Secret, And Yankee White Access. company’s Prior/current Experience And Demonstrated Knowledge Of Vh Loads And Dynamics, Weight And Balance, Electrical, Flight Control And Hydraulic Systems, Human Systems, Performance Analysis, System Safety, And E3 To Provide Adequate Analysis In Support Engineering Support. company’s Prior/current Experience And Ability To Analyze Vh Enhancements To Determine If They Necessitate Updates To Any Flight Certification And/or Natops Performance Charts. company’s Prior/current Experience And Ability With The Vh Automated Logistics Environment. company’s Ability To Access To Vh (to Include S-92a) Technical Data Support All Elements Of Logistics. provide Any Existing Technical Data Licenses Of Agreements With The Vh Oem For Performance Of Related Tasking Or Provided Documentation, With Concurrence From The Oem, Demonstrating The Ability To Obtain Any Necessary License/agreement For Access To Required Technical Data For This Effort. Documents Submitted In Response To This Requirement Will Not Be Counted Against Any Page Limitations. interested Parties Are Advised Against Submitting A Capability Statement That Merely Mimics Information In This Notice, Provides Brochure-like Information, Or Provides General Information. Acknowledgement Of Receipt Will Be Provided. All Information Submitted Will Be Adequately Safeguarded From Unauthorized Disclosure In Accordance With Far 15.207. responses To This Sources Sought, Including Any Capabilities Statement, Shall Be Electronically Submitted Via Email To Brittany Reynolds At Brittany.s.reynolds3.civ@us.navy.mil, In Either Microsoft Word Or Portable Document Format (pdf). The Deadline For Response To This Request Is 4:00 P.m., Eastern Standard Time, 22 January 2025. all Data Received In Response To This Sources Sought That Is Marked Or Designated As Corporate Or Proprietary Will Be Protected. Information And Materials Submitted In Response To This Request Will Not Be Returned. Classified Material Shall Not Be Submitted. No Phone Calls Will Be Accepted. all Questions Must Be Submitted Via E-mail. The Government Is Not Committed Nor Obligated To Pay For The Information Provided, And No Basis For Claims Against The Government Shall Arise As A Result Of A Response To These Sources Sought. vh-92a And Patriot Are Registered Trademarks Of The Department Of The Navy. the Naval Air Systems Command (navair) Intends To Issue A Contract With Sikorsky Aircraft Corporation, A Lockheed Martin Company (sikorsky), Under The Authority Of 10 U.s.c. 3204(a)(1) As Implemented By Federal Acquisition Regulation (far) 6.302-1, For The Procurement Of Products And Services Required To Sustain All Vh Presidential Helicopter Platforms (vh-3d, Vh-60n, And Vh-92a® Aircraft), Including Flight Test Aircraft, Trainer And Test Assets. disclaimer this Sources Sought Is For Informational Purposes Only. It Is A Market Research Tool Being Used To Determine Potential And Eligible Businesses Capable Of Providing The Supplies/services Described Herein, Prior To Determining The Method Of Acquisition And Issuance Of A Request For Proposal. This Is Not A Request For Proposals. It Does Not Constitute A Solicitation And Shall Not Be Construed As A Commitment By The Government. Responses In Any Form Are Not Offers And The Government Is Under No Obligation To Award A Contract As A Result Of This Announcement. The Government Is Not Committed Nor Obligated To Pay For The Information Provided, And No Basis For Claims Against The Government Shall Arise As A Result Of A Response To This Sources Sought. Any Information Submitted By Respondents To This Sources Sought Is Strictly Voluntary. anticipated Contract Information 1) Anticipated Contract Type: Indefinite Delivery Indefinite Quantity (idiq) With Fixed Price And Cost-type Contract Line Item Numbers (clins). 2) Anticipated Award Date: 1st Qtr Fy26 3) Anticipated Period Of Performance: Five (5) Years 4) Dpas Priority Rating: Dx required Capabilities this Effort Is For The Procurement Of Products And Services Required To Sustain The Vh Aircraft (vh-3d, Vh-60n And Vh-92a), Test Aircraft And Training Assets. To Accomplish The Full Scope Of This Effort, The Government Requires Integrated Logistics Support; Sustaining Engineering; Program Management; Repair; Reliability Improvements; Configuration And Obsolescence Management; Material Management And Procurement; Component Overhaul, Repair And Replacement; Overhaul And Rework; Test And Related Test Support; Systems Engineering And Integration Analysis; Physical Security And Systems Security Engineering; On-site Support; And Training Activities. sikorsky Aircraft Corporation, A Lockheed Martin Company (sikorsky), Is The Original Equipment Manufacturer (oem) Of The Vh-3d, Vh-60n, And Vh-92a. Given Sikorsky Is The Oem Of The Vh Platforms (vh-92a Is A Variant Of The Commercial S-92a), Is The Only Source With The Design Expertise, Technical Data, Equipment, And Subject Matter Experts That Can Provide In-depth Support For The Efforts Described Herein. The Government Believes No Other Firm Possesses The Required Proprietary Data And Expertise On This Effort. However, Responsible Sources May Submit A Capability Statement, Which Will Be Considered By The Agency. Any Offer Must Clearly Demonstrate The Capability To Respond To This Requirement Without Detriment To The Vh Presidential Helicopters Program And Must Address The Submission Information Elements Below. eligibility the Applicable Naics Code Is 336411 With A Small Business Size Standard Of 1,500 Employees. The Product Service Code (psc) Is 1520. Businesses Of All Sizes Are Encouraged To Respond; However, Each Respondent Must Clearly Identify Their Business Size. submission Information it Is Requested That Interested Businesses Submit To The Contracting Office A Brief Capabilities Statement Package (no More Than 10 Pages In Length, Single-spaced, 12 Point Font Minimum) Demonstrating Ability To Perform The Tasking Listed Under The Required Capabilities. This Documentation Must Address At A Minimum The Following: 1) Company Name; Company Address; Cage Code, Company Business Size, And Point-of-contact (poc) Name, Phone Number, Fax Number, And E-mail Address. 2) Company Profile To Include Number Of Employees, Annual Revenue History, Office Location(s), Duns Number, And A Statement Regarding Current Small/large Business Status And Socio-economic Set-aside Status, If Applicable. If You Are A Small Business, Provide An Explanation Of Your Company’s Ability To Perform At Least 50% Of The Tasking Described In Required Capabilities, Either Individually Or Along With Any Combination Of Small Businesses. 3) Prior/current Corporate Experience Performing Efforts Of Similar Size And Scope To The Tasking Described Under Required Capabilities Section Within The Last Three (3) Years, Including Contract Numbers, Indication Of Whether As A Prime Or A Subcontractor, Contract Values, Government Point Of Contract With Current Telephone Number, And A Brief Description Of How The Referenced Contract Relates To The Proposed Required Capabilities And Scope Of Performance. 4) Management Approach To Staffing This Effort With Qualified Personnel; 5) What Specific Technical Skills Does Your Company Possess Which Ensures Capability To Perform The Tasks? 6) Company’s Experience To Operate A Closed-loop Supply Chain System, Meet 100% Readiness, While Complying With Level Iii Restricted Area Security Measures For The Protection Of The Vh Program, Have Personnel To Support Secret, Sensitive Compartmented Information (sci), Top Secret, And Yankee White Access. 7) Company’s Prior/current Experience And Demonstrated Knowledge Of Vh Loads And Dynamics, Weight And Balance, Electrical, Flight Control And Hydraulic Systems, Human Systems, Performance Analysis, System Safety, And E3 To Provide Adequate Analysis In Support Engineering Support. 8) Company’s Prior/current Experience And Ability To Analyze Vh Enhancements To Determine If They Necessitate Updates To Any Flight Certification And/or Natops Performance Charts. 9) Company’s Prior/current Experience And Ability With The Vh Automated Logistics Environment. 10) Company’s Ability To Access To Vh (to Include S-92a) Technical Data Support All Elements Of Logistics. 11) Provide Any Existing Technical Data Licenses Of Agreements With The Vh Oem For Performance Of Related Tasking Or Provided Documentation, With Concurrence From The Oem, Demonstrating The Ability To Obtain Any Necessary License/agreement For Access To Required Technical Data For This Effort. Documents Submitted In Response To This Requirement Will Not Be Counted Against Any Page Limitations. interested Parties Are Advised Against Submitting A Capability Statement That Merely Mimics Information In This Notice, Provides Brochure-like Information, Or Provides General Information. Acknowledgement Of Receipt Will Be Provided. All Information Submitted Will Be Adequately Safeguarded From Unauthorized Disclosure In Accordance With Far 15.207. responses To This Sources Sought, Including Any Capabilities Statement, Shall Be Electronically Submitted Via Email To Brittany Reynolds At Brittany.s.reynolds3.civ@us.navy.mil, In Either Microsoft Word Or Portable Document Format (pdf). The Deadline For Response To This Request Is 4:00 P.m., Eastern Standard Time, 22 January 2025. all Data Received In Response To This Sources Sought That Is Marked Or Designated As Corporate Or Proprietary Will Be Protected. Information And Materials Submitted In Response To This Request Will Not Be Returned. Classified Material Shall Not Be Submitted. No Phone Calls Will Be Accepted. all Questions Must Be Submitted Via E-mail. The Government Is Not Committed Nor Obligated To Pay For The Information Provided, And No Basis For Claims Against The Government Shall Arise As A Result Of A Response To These Sources Sought. vh-92a And Patriot Are Registered Trademarks Of The Department Of The Navy.

Details: Description Invitation To Bid For Construction Of Solar Powered Irrigation Project, Construction Of Reinforced Concrete Tanks And Installation Of Pipelines For Upper Masaba Sip The National Irrigation Administration – Regional Office Ix Bac, Through The Cy 2025 National Expenditure Program (nep) For General Appropriation Act (gaa) 2025 Fund, Invites Contractors To Submit Bids For The Following Contract: Contract Reference No. : Niar9-epa-sip2025-015 (infra) Project Name : Upper Masaba Sip Contract Location : Quiniput, Zamboanga City Scope Of Works : Construction Of Solar Powered Irrigation Project, Construction Of Reinforced Concrete Tanks And Installation Of Pipelines For Upper Masaba Sip Approved Budget For The Contract (abc) : Php 9,894,609.41 Contract Duration : 168 Calendar Days Amount Of Bidding Documents : Php 10,000.00 The Nia – Ro9 Bac Is Conducting An Early Procurement Activity (epa) On Public Bidding For This Contract In Accordance With Republic Act 9184, Otherwise Known As The “government Procurement Reform Act” And Its Revised Implementing Rules And Regulations (rirr). To Be Eligible To Bid For The Above-stated Contract, A Contractor Must Meet The Following Major Requirements: (a) Filipino Citizen Or 60% Filipino-owned Partnership/corporation; (b) Completion Of A Similar Contract Costing At Least 50% Of The Abc, And (c) Net Financial Contracting Capacity (nfcc) At Least Equal To Abc. Interested Bidders Are Required To Submit Two (2) Valid Ids Of The Authorized Managing Officer/authorized Liaison Officer Indicated In The Submitted Company Profile/crc. Updated Company Profile Shall Also Be Submitted And Presented To The Nia-r9 Bac Secretariat Upon Purchased Of The Bidding Documents. Credit Line Commitment Shall No Longer Be Accepted As An Alternative To The Prospective Bidder’s Computation Of Nfcc Per Gppb Resolution No. 20-2013 Dated July 30, 2013. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion In The Eligibility Check, Preliminary Evaluation Of Bids, Post Qualification, And Award. The Significant Times And Deadlines Of Procurement Activities Are Shown Below: Issuance Of Bidding Documents : December 21, 2024 – January 20, 2025 At 8:30 Am Pre-bid Conference : January 8, 2025 At 9:00 Am Submission Of Bids : January 20, 2025 At 8:30 Am Opening Of Bids : January 20, 2025 At 9:00 Am Interested Bidders May Obtain Further Information From Nia – Ro9 Bac And Inspect The Bidding Documents At The Address Given Below Starting December 21, 2024 – January 20, 2025. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders From The Address Below And Upon Payment Of A Non-refundable Fee For The Bidding Documents Prescribed In The Above-mentioned List Of Projects. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. Only The Authorized Managing Officer/authorized Liaison Officer Indicated In The Submitted Company Profile/crc Shall Be Authorized To Purchase And Submit Bidding Documents. The Use Of Special Power Of Attorney (spa) Is Prohibited As Per Nia Memorandum Circular No.52 Series 2014 Dated December 1, 2014. The Nia – Ro9 Bac Will Hold A Pre-bid Conference On 08 January 2025 At 9:00 Am At Conference Room, National Irrigation Administration – Regional Office Ix, Regional Center, Balintawak, Pagadian City, Which Shall Be Open To All Interested Parties. Bids Must Be Duly Received By The Bac Secretariat Thru Manual Submission At The Office Address As Indicated Below On Or Before 20 January 2025 At 08:30 Am. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Securing Declaration Or Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb. Clause 18.1. Bids Will Be Opened In The Presence Of The Bidder’s Authorized Managing Officer Or Authorized Liaison Officer Of Interested Parties At The Address Below. The Nia – Ro9 Bac Additional Guidelines Is The Conduct Of Site Inspection To Be Scheduled During Pre-bid Conference. • The Certificate Of Site Inspection Shall Be Issued And Signed By The Nia R9 Authorized Representative After The Activity, Which Shall Be Required To Include In The Bid Tender (technical Component). Prospective Bidders Shall Submit Their Sealed Envelopes Together With The Duly Accomplished Forms As Provided In The Bd’s On Or Before The Deadline Of Dropping Of The Bid Documents At The Nia – Ro9 Bac By The Authorized Managing Officer (amo) Or Authorized Liaison Officer Indicated In The Submitted Company Profile/crc Of The Parties. The Liaison Officer Shall Submit A Letter From The Amo Authorizing Her/him To Drop Their Bid, Attend The Bidding Process And Also Submit A Copy Of Company I.d. For Verification. No Special Power Of Attorney (spa) Shall Be Allowed. The Procuring Entity Shall Not Be Held Responsible Of Any And All Bid Documents/proposals Losses. All Interested Contractors/bidders Must Inform The Bac Chairperson Thru Its Secretariat Of Their Documents Submitted In Any Means Provided Above Before The Date Of The Bid Opening To Avoid Late Submission. The Nia – Ro9 Bac Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders, In Accordance With The Provisions Of Section 41 Of Ra 9184 And Its Irr. Pursuant To Nia Memorandum Circular No. 119 S. 2020, Subject: Policy On Utilization Of Videoconferencing, Webcasting Or Similar Technology In The Conduct Of Public Procurement Activities, Procurement Proceedings For The Above Mention Contracts Will Be Held Through Face-to-face Meeting In Combination With Video Conferencing Using Google Meet Thru The Links: Pre-bidding Conference : Https://meet.google.com/hev-uxfp-utg Opening Of Bids : Https://meet.google.com/bkn-midq-rvv 5.2 For This Purpose, Contracts Similar To The Project Refer To Contracts Which Have The Same Major Categories Of Work, Which Shall Be: Completed For The Past Five (5) Years. • Irrigation And Flood Control With Experience In Solar Powered Pumps To Be Eligible To Bid For The Contract, Bidders Must Have Done A Single Largest Completed Contract (slcc) Containing A Category Of Work Which Is The Same As Or Similar To The Major Category Of Works, And Who’s Total Slcc Cost Is At Least 50% Of The Approved Budget For The Contract (abc) To Be Bid. The Above Slcc Must Be Supported By A Copy Of The Contract, Certificate Of Completion, And Owner’s Certificate Of Final Acceptance (1-year After The Issuance Of The Certificate Of Completion) Issued By The Project Owner Other Than The Contractor Or A Final Rating Of At Least Satisfactory In The Constructors Performance Evaluation System (cpes). In Case Of Contracts With The Private Sector, An Equivalent Document Shall Be Submitted. 10.3 A Valid Pcab License Is Required, And In Case Of Joint Ventures, A Valid Special Pcab License, And Registration For The Type And Cost Of The Contract For This Project. Interested Bidders Shall Have At Least Or Any Equivalent To Pcab Size Range “small B” Category: C & D (per Pcab Board Resolution No. 201, Series Of 2017) 10.4 The Key Personnel Must Meet The Required Minimum Years Of Experience Set Below: Key Personnel Relevant Experience General Experience Number Project Engineer 5 Years Licensed Civil Engineer. Shall Render Full-time Service To The Project Until Completion. 5 Years 1 Office Engineer 3 Years Licensed Civil Engineer. Shall Render Full-time Service To The Project Until Completion. 3 Years 1 Materials Engineer 1 3 Years Shall Be An Accredited Material Engineer Of Dpwh. Shall Render Service To The Project As Required. 3 Years 1 Foreman 5 Years Experienced In Irrigation Structures. Shall Render Fulltime Service To The Project Until Completion. 5 Years 1 Safety & Health Officer (so2) 3 Years Shall Have At Least 3 Years’ Experience In Construction Industry. Completed Cosh Training And Shall Render Fulltime Service To The Project Until Completion. 3 Years 1 Geodetic Engineer 3 Years Licensed Geodetic Engineer. Shall Render Service To The Project As Required. 3 Years 1 Electrical Engineer 3 Years A Licensed Electrical Engineer With Experience In Solar Powered Irrigation Projects. Shall Render Service To The Project As Required. 3 Years 1 Mechanical Engineer 3 Years A Licensed Mechanical Engineer With Experience In Solar Powered Irrigation Projects. Shall Render Service To The Project As Required. 3 Years 1 The Contractor May Assign Other Support Personnel From Those Listed For The Optimal Performance Of The Project Construction Team. The Support Personnel Shall Undertake The Required Day-to-day Site Or Office-related Activities Of The Contractor. Full Time Services Mean, The Personnel Involved Shall Render Minimum Of Eight (8) Hours A Day Or Forty (40) Hour A Week And Shall Be Available Upon Request Of The Procuring Entity. 10.5 The Minimum Major Equipment Requirements Are The Following: Equipment Capacity No. Of Units Crawler Type Drilling Rig (rotary Or Hydraulic Driven) 100m 1 Generator Set 15kva 1 Welding Machine 300a 1 Dumptruck 6 Cu.m 1 Concrete Mixer 1 – Bagger 1 Butt Fusion Machine Up To 6” Diameter 1 Survey Instrument 1 Set Initial Equipment Requirement Upon Mobilization: Equipment Capacity No. Of Units Crawler Type Drilling Rig (rotary Or Hydraulic Driven) 100m 1 Dumptruck 6 Cu.m 1 Survey Instrument 1 Set The Proof Of Ownership Of Equipment Requirements Are Copies Of Current Lto Official Receipt (or) And Certificate Of Registration (cr) Of The Equipment Which Should Be Attached Together With The Affidavit Of Ownership. In Case Of Leased Equipment, A Lease Contract And Affidavit Of Commitment Or Certificate Of Availability Of Equipment Should Be Submitted With The Lessor/owner As The Pledger Of The Equipment, Stating Therein That The Equipment Will Be Available For The Whole Duration Of The Project. For Purchase Agreement, The Description Of The Equipment To Be Purchased Such As Brand/model, Type Of Equipment, Motor No., Body No. And The Capacity Must Be Indicated In The Document, Otherwise, The Bac Will Not Honor The Purchase Agreement And The Bidder Will Be Declared As Non-complying. Likewise, List Of Contractor’s Major Equipment Units Pledged To Be Used For The Project Must Be Supported By Proof Of Ownership If It Is Owned, Lease Agreement If It Is Being Leased And Purchase Agreement If To Be Purchased. A Certification Of Availability Of Equipment For The Duration Of The Project Must Also Be Provided By The Equipment Owner And/or Lessor/vendor. The Bidder Should Also Specify In The Submitted Bid The Location Of The Equipment Where It Can Be Inspected. If Any Piece Of Equipment Is Not In The Specified Location, Then The Bidder Shall Be Post-disqualified. Item No. Description Qty Unit I Temporary Works & Mobilization/demobilization Mobilization/demobilization 1.00 Ls Temporary Facilities 1.00 Ls Project Billboard 1.00 Ls Ii Construction Safety & Health 1.00 Ls Iii Construction Of Solar Pump Irrigation System Well Drilling, Development And Testing W/ 6" Casing (until Good Aquifer Is Reached.) 1.00 Lot Solar Module Mounting Structure 1.00 Lot Solar Power Controller Housing (4x2 Meters) 1.00 Lot Perimeter Fence 1.00 Lot Delivery And Installation Of Lightning Arrester 1.00 Lot Pv Modules-solar Panels 600 Watts (please See Attached Plans.) 1.00 Lot 5hp Hybrid Ac/dc Submersible Water Pump Power: 5.5hp/4000w Voltage (ac): 85v-280v Voltage (dc): 80v-550v Max. Flow: 19m³/h Max. Head: 135m Outlet: 2" Body Diameter: 3 3/4" 1.00 Lot Hybrid Dc/ac Controller (11kw) 1.00 Lot Delivery & Installattion Of Cabling & Accessories For Solar Pump System 1.00 Lot Cctv Security System 1.00 Lot Construction Of Reinforced Concrete Tank Common Excavation (manual) 91.14 Cu.m 3000 Psi Concrete 66.87 Cu.m Rsb (cutting, Bending & Placing Of Rebars) 5,969.76 Kg Rc Tank Accessories (gate Valve, Pipes, Etc) 3.00 Ls Common Backfill (manual) 118.47 Cu.m Installation Of Water Distribution Pipe W/ Appurtenant Structures Common Excavation (manual) 266.64 Cu.m 4" Ø Hdpe Pipe Sdr 11 (w/ Free Delivery, Connectors& Fittings) 590.00 Ln.m 3" Ø Hdpe Pipe Sdr 11 (w/ Free Delivery, Connectors& Fittings) 570.00 Ln.m Air Release Valve Installation With Accessories 3.00 Ls Water Top Stand 4.00 Set Common Backfill (manual) 134.23 Cu.m