Electrical Tenders

Details: **** Attention: The Industry Day Has Already Occured **** the Us Army Corps Of Engineers, Caribbean District, Is Hosting An Industry Day For The Upcoming Solicitation For Rio Puerto Nuevo Flood Control Project, Supplemental Contract 3, San Juan, Puerto Rico. This Is Not A Solicitation For Proposals And No Contract Shall Be Awarded From This Notice. logistics date: 5 December 2024 location: centro De Emprendimiento | San Juan 159 Calle Carlos F Chardon, San Juan, 00918, Puerto Rico time: registration On-site: 8:00am, Ast seminar And Q&a Session: 8:30am – 10:30am, Ast one-on-one Discussions With Potential Solicitors (30-minute Time Slots): 10:30am – 12:00pm, Ast event Details seminar an Informative Presentation Will Be Provided With Detailed Information For The Upcoming Solicitation For Rio Puerto Nuevo Flood Control Project, Supplemental Contract 3, San Juan, Puerto Rico. The Focus Will Be On Scope Of Work, Design Information, Construction Considerations, Acquisition Timeline, And Contracting Requirements. one-on-one Discussions: “one-on-one" Discussions With Usace Personnel Will Be Offered In 30-minute Time Slots From 10:30am - 12:00pm On A First Come-first Served Basis, But Emphasis Should Be Placed On The Interest And Appropriateness Of Acquisition Approach And Procedures For Rio Puerto Nuevo Flood Control Project, Supplemental Contract 3 As Opposed To General Capabilities. Attendees Are Encouraged To Rsvp For Both The Event And One-on-one Discussions, If Interested, At Earliest Convenience To Secure A Time Slot, But Registration Will Be Accepted On Site Prior To The Start Of Discussions. Attendees Are Also Encouraged To Submit Questions In Advance To Allow Us To Focus On Areas Of Particular Interest, But Active And Open Discussion Will Be Encouraged Throughout. agenda: To Be Posted. presentation: To Be Posted. instructions To Participants in Order To Prepare A List Of Attendees Of Individuals Participating In This Industry Day, It Is Requested That An E-mail Be Sent To Jaclyn Yocum, Jaclyn.c.yocum@usace.army.mil No Later Than (nlt) December 2, 2024 At 5:00 Pm, Ast. Please Title The Email: “rsvp To Industry Day For Rio Puerto Nuevo Flood Control Project, Supplemental Contract 3, San Juan, Puerto Rico.” in Your Email, Please Include The Following Information: firm’s Name. name And Title Of Those Individuals Participating. contact Number And E-mail Address. specify Type Of Business, Small Business Category (if Any), Uei Information And If You Would Like To Participate As A Prime Or Subcontractor. specify If Your Company, If You Are Seeking A One-on-one Breakout Session For Rio Puerto Nuevo Flood Control Project, Supplemental Contract 3, San Juan, Puerto Rico (note: A Response Will Be Provided To You With The Reserved Time Slot And Room Number). request For Information questions: The Government Will Address Questions The Day Of And After The Event. Attendees Will Be Given The Opportunity To Submit Written Questions During The Presentation; Index Cards Will Be Provided. After The Industry Day, All Questions Must Be Submitted Through Projnet (see Instructions Below). all Questions And Official/approved Answers Will Be Posted On The Sam.gov Website. instructions For Submitting Questions questions Relating To This Webinar And Future Projects Are To Be Submitted Via Bidder Inquiry In Projnet At (https://www.projnet.org). To Submit And Review Inquiry Items, Participants Will Need To Use The Bidder Inquiry Key Presented Below And Follow The Instructions Listed Below The Key For Access. A Participant Who Submits A Comment /question Will Receive An Acknowledgement Of Their Comment/question Via Email, Followed By An Answer To The Comment/question After It Has Been Processed By Our Technical Team. all Timely Questions And Official/approved Answers Will Be Made Available Through Projnet. Official/approved Answers To All Timely Questions Will Also Be Posted On The Sam.gov Website In The Form Of A Report Generated From Projnet When All Answers Are Finalized. We Appreciate Your Questions And Feedback By 5:00 Pm, Ast On December 13, 2024. note: Please Indicate The Name Of The Project When Submitting Your Questions. rio Puerto Nuevo Supplemental Contract 3 – Bidder Inquiry Key: I7w97w-uh6xgs specific Instructions For Projnet Bid Inquiry Access From Projnet Home Page: 1. Identify The Agency. This Should Be Marked As Usace. 2. Email. Enter The Email Address You Would Like To Use For Communication. 3. Key. Enter The Bidder Inquiry Key Listed Above. 4. Click Continue. A Page Will Then Open Saying That A User Account Was Not Found And Will Ask You To Create One Using The Provided Form. 5. Enter Your First Name, Last Name, Company, City, State, Phone, Email, Secret Question, Secret Answer, And Time Zone. Make Sure To Remember Your Secret Question And Answer As They Will Be Used From This Point On To Access The Projnet System. 6. Click Add User. Once This Is Completed You Are Now Registered Within Projnet And Are Currently Logged Into The System. specific Instructions For Future Projnet Bid Inquiry Access From Projnet Home Page: 1. For Future Access To Projnet, You Will Not Be Emailed Any Type Of Password. You Will Utilize Your Secret Question And Secret Answer To Log In. 2. Identify The Agency. This Should Be Marked As Usace. 3. Email. Enter The Email Address You Used To Register Previously In Projnet. 4. Key. Enter The Bidder Inquiry Key Listed Above. 5. Click Continue. A Page Will Then Open Asking You To Enter The Answer To Your Secret Question. 6. Enter Your Secret Answer And Click Login. Once This Is Completed You Are Now Logged Into The System. contract Scope rio Puerto Nuevo Flood Control Project, Supplemental Contract 3: Channel Bottom And Wall Improvements, San Juan, Puerto Rico the Work For The Rio Puerto Nuevo Supplemental Contract 3 Includes The Widening And Deepening Of The Existing Channel For Flood Control Purposes By Constructing Two Drilled Shaft Walls And Dredging To The Required Depth. Each Wall Is Approximately 5200 Feet Long With Exposed Heights Ranging From 24 Feet To 31 Feet And Will Be Tied Together With A Cap Beam. Construction Of The Walls Will Require Temporary Sheet Piling To Maintain A Minimum Flow Area For Flood Events. This Contract Also Includes A Tie-in Structure At The Josefina Confluence, A Transition The Existing River Upstream, And A Transition To An Existing Project At The Downstream Outlet. Other Work Includes Sanitary Sewer, Water, And Electrical Utility Relocations, As Well As Implementation Of New Stormwater Inlets For Drainage Across The Wall Into The Channel. naics Code: 237990 - Other Heavy And Civil Engineering Construction With A Small Business Size Standard Of $45mil. order Of Magnitude (dfar 236.204): Between $250,000,000 And $500,000,000. point Of Contact (poc): Jaclyn Yocum, Jaclyn.c.yocum@usace.army.mil. Please Note That All Questions Relating To This Webinar And Future Projects Are To Be Submitted Via Bidder Inquiry In Projnet At Https://www.projnet.org. update November 22, 2024: The Draft Plans And Specifications Have Been Provided With This Announcement. These Plans And Specifications Supersede Any Drafts Previously Made Available. Note: Rpn_cnt3_draft_specs_vol_1of3.pdf Is Assigned As The Sf1442 - Section "00" Of The Solicitation And Will Not Be Made Available Until The Official Solicitation Package Is Advertised.see The Attachments/links Section Of This Announcement To Download These Documents. update December 3, 2024: The Bidder Inquiry Has Been Extended And Will Close 5:00 Pm, Ast On December 13, 2024 To Accomidate Submission Of Questions After The Industry Day And The Draft Plans And Specifications. update December 10, 2024: The Power Point Presentation Slides And Attendees List For The Industry Day That Was Held On December 5, 2024 Has Been Uploaded To This Announcement. See The Attachments/links Section Of This Announcement To Download These Documents.

Details: This Is A Request For Information (rfi) Only. There Is No Solicitation Package Available. the Naval Air Warfare Center, Aircraft Division (nawcad) Lakehurst, Nj Is Issuing This Request For Information Notice To Conduct Market Research To Identify Potential Sources And Request Information For A Potential Procurement Of Rack Mounted Analog Discrete Input Measurement Instruments For The Engine Test Instrumentation Replacement System (etirs). The Instrumentation Must Meet Various Functions, And Each Instrument Can Fulfill One Or Multiple Functional Requirements. this Is A Request For Information Only – Not A Request For Proposal. This Rfi Is Issued For The Purpose Of Determining Market Interest, Feasibility, And Capability Of Sources And Does Not Constitute A Request For Proposal Or Commitment By The Government. this Rfi Is Issued Sole For The Market Research Information And Planning Purposes And Does Not Constitute A Solicitation.  information Herein Is Based On The Best Information Available At The Time Of Publication, Is Subject To Revision, And Is Not Binding Upon The Government.  no Reimbursement Will Be Made Of Any Costs To Provide Information In Response To This Rfi Or Any Follow-up Information Requests. this Rfi Is A Market Research Tool Being Used To Determine Potential And Eligible Vendors Capable Of Meeting The Requirements Described Herein Prior To Determining The Method Of Acquisition And Issuance Of A Request For Proposal. In Accordance With Far 15.201(e), Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract.  navair Is Requesting Information On The Industry’s Capability Of Manufacturing Commercial Off The Shelf (cots) Or Modified Cots (mcots) Rack Mounted Mil-std-1553 Communication Performance Instruments That Meet Or Exceed The Requirements Below. the Rack Mounted Mil-std-1553 Communication Performance Instruments Shall Meet Or Exceed The Performance/environmental Requirements Shown In The Following Functional Breakdown: instrumentation Performance Requirements mil-std-1553 Communication Performance Requirements ** Refer To The Tables In The Attached Instrumentation Characteristics Excel File For All Performance Requirements. The Performance Specification Is Export-controlled. In Order To Receive A Copy Of The Performance Specification Interested Respondents Must Be U. S. Dod Contractors. Interested Respondents Must Provide The Contracting Office Point Of Contact Identified Below With A Copy Of Their Current, Approved Form Dd2345, 'militarily Critical Technical Data Agreement'. Once Received And Current Jcp Certification Verified By Navair, The Draft Performance Specification Will Be Transmitted To You From Navair Via The Dod Safe System, To The Data Custodian You Have Identified On The Dd Form 2345. Contractors Must Request The Draft Performance Specification In Writing From Mr. Terrence Shearer, Terrence.d.shearer.civ@us.navy.mil. acquisition Instrumentation Environmental Requirements the System’s Equipment Design, Located Outside The Instrument And Control Room (i&c Cab), Shall Meet Class 1 Environmental Requirements As Defined In Table 2 Of Mil-prf-28800. the System’s Equipment, Within The Instrument And Control Room (i&c Cab) Boundary, Design Shall Meet The Temperature And Humidity Requirements Of Class 4 Equipment In Section 3.9.2 Of Mil-prf-28800. the System Shall Be Fully Operational During The Expected Shipboard Deck Environmental Vibration Levels As Described Per Mil-std-167-1a, Type 1 - Environmental Vibration. the System’s Equipment Design Shall Comply With The Requirement Matrix For Navy Surface Ships And Navy Ground In Table 5 Of Mil-std-461 Or Equivalent. cs115 (conducted Susceptibility, Bulk Cable Injection, Impulse Excitation) And Cs118 (personnel Borne Electrostatic Discharge) Are Specified As Applicable. navair Is Requesting The Following Information From Industry Vendors To Demonstrate How They Can Meet The Requirements Listed Above: vendor Capability. vendor Capacity. documentation Demonstrating That The Vendor Is Capable Of Manufacturing Cots And/or Modified Cots Rack Mounted Mil-std-1553 Communication Performance Instruments. Documentation Demonstrating That The Vendor Is Capable To Sustain The Product. any Information On Past Performance Of Similar Efforts. a Technical Data Sheet Describing The Electrical And Performance Characteristics Of The Instruments. the Vendors May Also Respond With A Presentation Of 5 Slides Or Less With A Specific Focus On Explanation Of Data Sheets And Instrument Performance In Relation To Gfi Requirements. navair Is Requesting The Following Information From Industry Vendors To Comprehend The Logistics Impacts Associated To Each Instrument: how Long Will The Product Be Supported For Procurement And Repair? does The Product Require Calibration? if So, Does The Product Require Additional Equipment/tools To Calibrate? all Interested Parties Should Have The Following: a Quality Assurance Program Compliant With Iso9001 Or Equivalent. test Data Demonstrating That The Above Performance And Environmental Requirements Have Been Met With The Proposed Rack Mounted Mil-std-1553 Communication Performance Instruments. acquisition Instrumentation Software Requirements instrumentation Shall Be Able To Be Controlled Through An Application Programming Interface (api) By Software Code Running On The Test Bench. Navair’s Preferred Apis Are Those Standardized Interfaces Defined And Managed By The Interchangeable Virtual Instrument (ivi) Foundation (https://www.ivifoundation.org) Including The Following: vxi Plug & Play standard Commands For Programmable Instrumentation (scpi) virtual Instrument Software Architecture (visa) interchangeable Virtual Instrument (ivi) all Interested Parties Should Respond With Their Compliance With The Above Apis For Each Potential Offering. If A Vendor’s Instrument Is Not Compliant With The Above Apis, They Should State So And, Instead, Provide An Overview Of How To Programmatically Control Their Instrument, Including Any Required Drivers, Applications, Programming Languages, Operating Systems, Or Third-party Tools. in Addition To Expressing Interest And Providing The Requested Information, Include Estimated Price Details. The Government Is Seeking Unit Price And Lead Time For Each Type Of Rack Mounted Data Acquisition Instrument Type. Brochures, Manufacturing Capability And Capacity, And Past Performance Information May Be Included In The Rfi Response. to Assist In Our Market Research And Determination Of Any Applicable Small Business Set-aside For This Effort, If You Are A Small Business Interested In Priming This Effort And Plan To Utilize “similarly Situated Entities” To Meet The Limitations On Subcontracting, Please Identify The Name & Cage Code Of The Specific Firm(s) You Intend To Partner/subcontract With To Meet The Requirements As Well As Their Sb Size Status Under The Naics Code Assigned To This Notice. Information Regarding Any Planned Similarly Situated Entity Should Be Included In Answering Any Questions Outlined In This Rfi In Order To Assist The Government’s Capability Determination.  far 52.219-14 Limitation On Subcontracting Requires A Small Business Prime On A Set-aside To Perform At Least 50% Of The Cost Of Contract Performance.  Small Business Primes May Now Count “first Tier Subcontracted” Work Performed By Similarly Situated Entities As If It Were Performed By The Prime Itself. Please Read The Full Text Of The Clause Deviation (52.219-14 Class Deviation 2020-o0008 Dated 04/03/20 At Https://www.acquisition.gov/browse/index/far).   interested Sources Should Provide Rfi Responses And Related Data To The Pocs Identified Below, No Later Than 30 Days After The Post Date Of This Rfi. All Information Sent Should Reference This Rfi Number On The Subject Response Line Of The Emailed Response As Well As On All Enclosed Documents. Responses Must Include The Company Name, Address, Point Of Contact Name And Email/phone, And Company Size. Proprietary Data Must Be Marked On A Page-by-page Basis And Will Be Kept Confidential And Protected Where So Designated. Failure To Respond To This Rfi Does Not Preclude Participation In Any Future Rfp That May Be Issued. Any Comments Provided May Or May Not Be Included In A Formal Solicitation. Respondents May Provide Information And Rough Orders Of Magnitude (rom) On Any Currently Available Product Or A Company's' Capabilities That Will Meet The Navy's Requirements. responses Must Be Received No Later Than December 16th 2024 By 4pm Est.

Details: Description 1. The Department Of Agrarian Reform (dar), Catanduanes Provincial Office Through The Cy-2025 National Expenditure Program (nep) Intends To Apply The Sum Of One Million Six Hundred Seventy & 00/100 (php 1,670,000.00) Being The Abc To Payments Under The Contract For Cy-2025 Procurement Of Farm Machineries & Equipments (mechanical Flat Bed Dryer) For Rice Production Through Crfpsp – Crfps Project For Baparco – Batong Paloway, San Andres, Catanduanes (darcat-pb-epa2025-015). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Item No. Fme Price /unit Total Price 1 1 Unit – Mechanical Flat Bed Dryer Php 1,670,000.00 Php 1,670,000.00 Specifications: Furnace: • Direct Fired Made Refractory Bricks Or Its Equivalent • Able To Resist Heat Of At Least 800 Celsius • Gravity Type Feeding Mechanism • Multi Fuel Capacity Which Uses Biomass As Fuel Including Cracked Pili Nut Shell, Corn Hub & Rice Hull Blower And Engine: • Axial Blower Driven By At Least 14 Hp Diesel Engine, Single Cylinder • Water Cooled; Manual/hand Cracked Starting • Dynamically Balanced With Appropriate Bearings And Shafting With Belt. Concrete Flooring: • Concrete Flooring/slab • Class A Mixture With At Least 100 Mm Thick • 10 Mm Rsb Reinforcement Spaced At 80 Cm. Drying Bin: • Made Of Reinforced Concrete Walling With A Minimum Of 100 Mm Thickness • 8 Mm Rsb Reinforcement Spaced At Minimum Of 150 Mm • Inside Dimension Of Bin: Width=12 Ft, Length=24 Ft. • Total Bin Height= 1500 Mm • Height Of Plenum= 1040 Mm • Holding Depth Of 450 Mm With Gauge 18 Perforated Metal Floor Having At Least • 2.54 Mm Perforation With Complete Bagging Ports (at Least 4) • Adequately Supported With Frames And Braces To Withstand 6 Tons Rice Or Corn. • Equipped With Heavy Duty Dial And Probe Type Thermometer Range Of 0-100 C Shed: • Stand-alone Type Shed • Roofing Sheets Made Of Brand New Pre-painted Corrugated Sheet With 0.25 Mm Thk. • Roofing Sheets Shall Be Connected To The Steel Purlins By Using Self-tapping Roof Metal Screws(tekscrew) • Steel Columns With Total Of Ten (10) Columns To Cover The Concrete Flooring • Angle Bar For Trusses With 2 Pcs-75mm X 50 Mm X 6.5mm & C-channel Purlins With 75mm X 75mm X 6.5mm Agitator: • Chain Driven W/ 60-60 Chain & Sprocket • Powered By 5.5 Hp Air-cooled Gasoline Engine Package Inclusion: • 1 Unit Grain Moisture Meter Specs: 1. Measurement Range: 5-40% Moisture Content (mc) 2. Accuracy: ±0.5% Mc (in The Range Of 5-25% Mc) 3. Repeatability: ±0.2% Mc 4. Grain Temperature Range: -20°c To 80°c (-4°f To 176°f) 5. Sample Size: 100-500 Grams (3.5-17.6 Oz) 6. Measurement Method: Electrical Resistance 7. Display: Digital Lcd Display With Backlight 8. Units: % Mc 9. Power Supply: 220v Ac 10. Dimensions: Approximately 200x150x50 Mm (7.9x5.9x2 Inches) 11. Weight: Approximately 1-2 Kg (2.2-4.4 Lbs) Inclusions: • With Amtec Test Result • Conform To Paes 119-2001 & Paes 301:2020 • Warranty Duration:1 Year Warranty Of Whole Unit. • With Request Authority To Bid • Available In The Philippine Market W/ Attached Evidence & Must Have Service Center Within Region 5.with Approved Test From Manufacturer; With Reflectorized Sticker Printed With Dar Logo (3x3 Inches) & The Words “department Of Agrarian Reform -crfpsp Project” (2x12 Inches); Inclusive Of Field Testing, Demo On Operations & Maintenance, And On-site Delivery. • On Site Delivery; At Batong Paloway, San Andres, Catanduanes • Delivery Period: 60 Days Upon Receipt Of Notice To Proceed Total Abc: Php 1,670,000.00 Vat Inclusive 2. The Department Of Agrarian Reform (dar), Catanduanes Provincial Office Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By A Period Sixty (60) Days. Bidders Should Have Completed, Within At Least Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Department Of Agrarian Reform (dar), Catanduanes Provincial Office And Inspect The Bidding Documents At The Address Given Below During Regular Office Hours (8:00 Am To 5:00 Pm), Mondays Thru Fridays, Valid For The Duration That This Particular Bidding Activity Is Open From December 19, 2024 – January 7, 2025 Until 12:00 Noon. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 19, 2024 – January 7, 2025 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (php 5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Presented In Person, By Mail, Or Through Electronic Means. 6. The Department Of Agrarian Reform, Catanduanes Provincial Office Will Hold A Pre-bid Conference For This Particular Procurement On December 26, 2024, Thursday, 9:00 Am At Dar Catanduanes Provincial Office, Constantino (pob.), Virac, Catanduanes. 7. Bids Must Be Duly Received By The Bac Secretariat Through (i) Manual Submission At The Office Address Indicated Below, (ii) Online Or Electronic Submission As Indicated Below, Or (iii) Both On Or Before January 7, 2025 Tuesday, Until 12:00 Noon. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On January 7, 2025 Tuesday, 1:00 Pm At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Department Of Agrarian Reform (dar), Catanduanes Provincial Office, Through The Provincial Bids & Awards Committee (bac) Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Ms. Ma. Katrina M. Sarausa Arpo I /head Bac Secretariat Department Of Agrarian Reform (dar) Catanduanes Provincial Office Brgy. Constantino (pob.), Virac, Catanduanes Cellphone Hotline: 09634442986 Email Address: Bacsec.catan@gmail.com 12. You May Visit The Following Websites: For Downloading Of Bidding Documents: Philgeps Website For Online Bid Submission: Bacsec.catan@gmail.com 18 December 2024 Atty. Cherry A. Agmata Bac Chairperson

Details: The Work For This Project Includes, But Is Not Limited To, The Construction Of A Multi-story Communications Center Facility To Support Naval Computer And Telecommunications Station Guam Operations. Special Features Include Sensitive Compartmented Information Facility Construction Work In Accordance With Icd/ics 705 And Demolition And Incidental Related Work. Secure Facility Construction Shall Be Performed By U.s. Companies Using U.s. Citizens. the Work Will Also Include Three (3) Pre-priced Options For The Construction Of Two (2) Single-story Warehouse Facilities, And Osp Fiber Line Sonet Ring. In Accordance With Far 52.217-7 Option For Increased Quantity – Separately Priced Line Item, The Government May Exercise The Options By Written Notice To The Contractor Within 365 Days Of Contract Award. the Magnitude Of This Project Is Estimated Between $250,000,000 And $500,000,000. The North American Industry Classification System (naics) Code Is 236220 And Average Annual Receipts Of $45 Million Over The Past Three Years. The Contract Completion Period Is Anticipated To Be 1,255 Calendar Days. a Sources Sought Notice (n62742sscomms) For This Procurement Was Posted On 22 August 2023 On The System For Award Management (sam) Website Https://www.sam.gov/, And A Market Survey Was Conducted That Included An Assessment Of Relevant Qualifications And Capabilities Of Potentially Qualified Firms. As A Result Of The Market Research Analysis, A Determination Was Made To Solicit This Procurement On An Unrestricted Basis Inviting Full And Open Competition. this Solicitation Will Utilize The Tradeoff Source Selection Process. All Technical Factors, When Combined, Are Considered Of Equal Importance To Past Performance. The Factors Are: Factor 1 – Experience, Factor 2 – Safety, Factor 3 – Small Business Utilization And Participation, Factor 4 – Past Performance, And Price. Contract Award Will Be Made To The Offeror Proposing The Best Value To The Government From A Non-price And Price Standpoint. Furthermore, A Relevant Construction Project Is Defined As A Construction Project That Includes At Least One Of The Following Individual Features: (1) Precision Cooling System. New Construction Of A Chiller Type Technology Cooling System Engineered Specifically For Data Center/electronic/it Networking Environments. Projects Submitted Which Reference Comfort Cooling Systems Which Are Engineered Primarily For The Intermittent Use Required To Maintain A Comfortable Environment For People In Facilities Will Not Be Considered. Projects Submitted To Demonstrate Precision Cooling System Will Only Be Considered If The Work Was Performed By The Specific Entity Proposed For The Precision Cooling System Under The Resultant Contract, As Identified In Block 1 Of Attachment A. (2) Uninterruptable Power Supply System. New Construction Of An Uninterruptible Power Supply (ups) System That Is 225 Kva Size Or More. Projects Submitted To Demonstrate Ups System Experience Will Only Be Considered If The Work Was Performed By The Specific Entity Proposed For The Ups System, As Identified In Block 1 Of Attachment A. (3) Clean Agent Fire Suppression System. New Construction Or Replacement Of A Clean Agent Fire Extinguishing System And Releasing System, Including All Mechanical, Controls And Electrical Components Necessary For A Complete And Operating Clean Agent Fire Suppression System. Projects Submitted To Demonstrate Clean Agent Fire Suppression System Experience Will Only Be Considered If The Work Was Performed By The Specific Entity Proposed For The Clean Agent Fire Suppression System, As Identified In Block 1 Of Attachment A. see Request For Proposal (rfp) Document 00 21 16. the Rfp, Including The Specifications And Drawings, Can Be Accessed By Approved Individuals Via The Sam Website At Https://sam.gov/. Approved Individuals Must Register At The Sam Website To Obtain Access To The Rfp. Registration Instructions Can Be Found On The Sam Website. Once Registered In Sam, Approved Individuals Must Request Explicit Access To View The Documents. An Email Will Be Forwarded Once The Contracting Office Has Approved Or Declined The Request. Approved Individuals May View And/or Download The Rfp Documents. Amendments Will Also Be Posted At Https://sam.gov/. It Is Highly Recommended That Firms Register On The Sam Website As This Will Be The Only Plan Holder’s List Available. It Is The Offeror’s Responsibility To Check The Sam Website Periodically For Any Amendments To The Solicitation. offerors Are Required To Be Registered In The Sam Database At Https://www.sam.gov At The Time Of Proposal Submission. see Document 00 21 16 For Pre-proposal Site Visit Information. This Site Visit Is To Provide Offerors With An Opportunity To Familiarize Themselves With The Jobsite And Conditions To Be Encountered And Is Not For The Purpose Of Answering Questions. Forms Submission To Ms. Merbby Corpuz At Merbbyjoyce.n.corpuz.civ@us.navy.mil On Or Before 31 October 2024, 2:00 P.m., Hawaii Standard Time (hst). (1) Current Dbids. If An Interested Attendee Has Current Dbids Credentials For The Specific Base Where The Project Is Located, Submit The Following: company Letter Template: One Letter Required Per Company. List Attendees In Alphabetical Order (by Last Name). Must Be Signed By A Person Authorized To Provide The Certification Required. request For Camera Pass Form: Applicable Only For Those With Dbids Credentials Who Will Be Taking Photos. One Letter Required Per Company. Dbids Number Is Required On The Form. Once Properly Submitted To The Poc In Subparagraph (c) Above And Once Approved, You Will Receive A Routing Number From The Poc. An Appointment With The Naval Base Guam (nbg) Visitor’s Control Center (vcc) Is Required To Complete The Processing Of Your Camera Pass. (2) Current Dbids Not For The Specific Base Where The Project Is Located. Submit The Following: company Letterhead Template: One Letter Required Per Company. List Attendees In Alphabetical Order (by Last Name). Must Be Signed By A Person Authorized To Provide The Certification Required. dbids Base Access Request Form: Each Attendee Please Read, Complete, And Sign/date. Typewritten Is Preferred. Any Handwritten Forms Must Be Legible. email The Vcc At M-gu-nbg-n3at-vcc@fe.navy.mil To Have Their Dbids Programmed With The Specific Base Where The Project Is Located. Prior To Emailing The Vcc, Please Submit The Company Letter And The Dbids Base Access Request Form To The Poc In Subparagraph (c) Above For Approval. Once Approved, The Documents Will Be Sent Back To You For Submission To The Ngb Vcc Along With The Request To Have The Dbids Cards Programmed With The Specific Base Where The Project Is Located. request For Camera Pass Form: Applicable Only For Those With Dbids Credentials Who Will Be Taking Photos. One Letter Required Per Company. Dbids Number Is Required On The Form. Once Properly Submitted To The Poc In Subparagraph (c) Above And Once Approved, You Will Receive A Routing Number From The Poc. An Appointment With The Naval Base Guam (nbg) Visitor’s Control Center (vcc) Is Required To Complete The Processing Of Your Camera Pass. (2) No Dbids Credentials. Submit The Following: company Letterhead Template: One Letter Required Per Company. List Attendees In Alphabetical Order (by Last Name). Must Be Signed By A Person Authorized To Provide The Certification Required. secnav 5512/1 Form: Each Attendee Shall Read, Complete, And Sign/date Form. Typewritten Is Preferred. Any Handwritten Forms Must Be Legible. Do Not Submit The Secnav 5512/1 Form To The Government. The Contractor Is Responsible For Either Hand-carrying Or Emailing This Document To The Ngb Vcc Along With Any Other Pertinent Document Listed In This Subparagraph. dbids Base Access Request Form: Each Attendee Please Read, Complete, And Sign/date. Typewritten Is Preferred. Any Handwritten Forms Must Be Legible. naval Base Guam Foreign National Base Access Request Form (applicable To Foreign Nationals Only). Each Attendee Please Read And Complete. fn Biometric Data Form (applicable To Foreign Nationals Only): Each Attendee Please Read And Complete. request For Camera Pass Form: Applicable Only For Those With Dbids Credentials Who Will Be Taking Photos. One Letter Required Per Company. Once You Have A Routing Number From The Vcc For Your Dbids Application, Insert That Number On The Form. Once Properly Submitted To The Poc In Subparagraph (c) Above And Once Approved, You Will Receive A Routing Number From The Poc. An Appointment With The Naval Base Guam (nbg) Visitor’s Control Center (vcc) Is Required To Complete The Processing Of Your Camera Pass.

Purchaser Name: Turkish Electrical Communications A.S. | 400 Kv (Birecik Hes-Syrian Border) Brşn Zeugma (temporary Birecik) Eih (ttfo) Facility Construction Work

Purchaser Name: Turkish Electrical Communications A.S. General Office (TEIAS) 6th Regional Directorate KUTAHYA | Due to Itis, Eskişehir Operation and Group Chief Engineering Personnel Service Transportation Work for 23 Months (03/02/2025 - 31/12/2026)

Purchaser Name: PROFESSIONAL HIGH SCHOOL OF ELECTRICAL ENGINEERING AND ELECTRONICS MARIA SKLODOVSKA CURY | "Delivery, Installation and Warranty Service of Equipment for Building a Wax and STEM Environment, Funded under the National Program "Building a School STEM Environment in the "Maria Skłodowska-Curie" Program - City of Sliven"

Purchaser Name: Turkish Electrical Communications A.S. General Directorate of the 20th Regional Directorate | 2 19+1 Person Service Vehicles, 1 16+1 Person Service Vehicle with Fuel and Driver, Edirne City, Lüleburgaz-Babaeski, Lüleburgaz-Edirne 250 Personnel Transportation Service for 12 Months

Purchaser Name: Turkish Electrical Communications A.S. General Directorate (TEIAS) 16th Regional Directorate BATMAN | 2024 Worker Protective Clothing Materials Purchase Work

Purchaser Name: Turkish Electrical Communications A.S. | 12 Months Workplace Physician and Other Health Personnel