Electrical Tenders

Electrical Tenders

DEPT OF THE NAVY USA Tender

Others
United States
Details: This Is A Request For Information (rfi) Only. There Is No Solicitation Package Available. the Naval Air Warfare Center, Aircraft Division (nawcad) Lakehurst, Nj Is Issuing This Request For Information Notice To Conduct Market Research To Identify Potential Sources And Request Information For A Potential Procurement Of Rack Mounted Analog Discrete Input Measurement Instruments For The Engine Test Instrumentation Replacement System (etirs). The Instrumentation Must Meet Various Functions, And Each Instrument Can Fulfill One Or Multiple Functional Requirements. this Is A Request For Information Only – Not A Request For Proposal. This Rfi Is Issued For The Purpose Of Determining Market Interest, Feasibility, And Capability Of Sources And Does Not Constitute A Request For Proposal Or Commitment By The Government. this Rfi Is Issued Sole For The Market Research Information And Planning Purposes And Does Not Constitute A Solicitation.  information Herein Is Based On The Best Information Available At The Time Of Publication, Is Subject To Revision, And Is Not Binding Upon The Government.  no Reimbursement Will Be Made Of Any Costs To Provide Information In Response To This Rfi Or Any Follow-up Information Requests. this Rfi Is A Market Research Tool Being Used To Determine Potential And Eligible Vendors Capable Of Meeting The Requirements Described Herein Prior To Determining The Method Of Acquisition And Issuance Of A Request For Proposal. In Accordance With Far 15.201(e), Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract.  navair Is Requesting Information On The Industry’s Capability Of Manufacturing Commercial Off The Shelf (cots) Or Modified Cots (mcots) Rack Mounted Analog Resistance Measurement Instruments That Meet Or Exceed The Requirements Below. the Rack Mounted Analog Resistance Measurement Instruments Shall Meet Or Exceed The Performance/environmental Requirements Shown In The Following Functional Breakdown: instrumentation Performance Requirements analog Resistance Measurement Performance Requirements ** Refer To The Tables In The Attached Instrumentation Characteristics Excel File For All Performance Requirements. The Performance Specification Is Export-controlled. In Order To Receive A Copy Of The Performance Specification Interested Respondents Must Be U. S. Dod Contractors. Interested Respondents Must Provide The Contracting Office Point Of Contact Identified Below With A Copy Of Their Current, Approved Form Dd2345, 'militarily Critical Technical Data Agreement'. Once Received And Current Jcp Certification Verified By Navair, The Draft Performance Specification Will Be Transmitted To You From Navair Via The Dod Safe System, To The Data Custodian You Have Identified On The Dd Form 2345. Contractors Must Request The Draft Performance Specification In Writing From Mr. Paras Patel, Paras.d.patel.civ@us.navy.mil. acquisition Instrumentation Environmental Requirements the System’s Equipment Design, Located Outside The Instrument And Control Room (i&c Cab), Shall Meet Class 1 Environmental Requirements As Defined In Table 2 Of Mil-prf-28800. the System’s Equipment, Within The Instrument And Control Room (i&c Cab) Boundary, Design Shall Meet The Temperature And Humidity Requirements Of Class 4 Equipment In Section 3.9.2 Of Mil-prf-28800. the System Shall Be Fully Operational During The Expected Shipboard Deck Environmental Vibration Levels As Described Per Mil-std-167-1a, Type 1 - Environmental Vibration. the System’s Equipment Design Shall Comply With The Requirement Matrix For Navy Surface Ships And Navy Ground In Table 5 Of Mil-std-461 Or Equivalent. cs115 (conducted Susceptibility, Bulk Cable Injection, Impulse Excitation) And Cs118 (personnel Borne Electrostatic Discharge) Are Specified As Applicable. navair Is Requesting The Following Information From Industry Vendors To Demonstrate How They Can Meet The Requirements Listed Above: vendor Capability. vendor Capacity. documentation Demonstrating That The Vendor Is Capable Of Manufacturing Cots And/or Modified Cots Rack Mounted Instruments. Documentation Demonstrating That The Vendor Is Capable To Sustain The Product. any Information On Past Performance Of Similar Efforts. a Technical Data Sheet Describing The Electrical And Performance Characteristics Of The Instruments. the Vendors May Also Respond With A Presentation Of 5 Slides Or Less With A Specific Focus On Explanation Of Data Sheets And Instrument Performance In Relation To Gfi Requirements. navair Is Requesting The Following Information From Industry Vendors To Comprehend The Logistics Impacts Associated To Each Instrument: how Long Will The Product Be Supported For Procurement And Repair? does The Product Require Calibration? if So, Does The Product Require Additional Equipment/tools To Calibrate? all Interested Parties Should Have The Following: a Quality Assurance Program Compliant With Iso9001 Or Equivalent. test Data Demonstrating That The Above Performance And Environmental Requirements Have Been Met With The Proposed Rack Mounted Analog Resistance Measurement Instruments. acquisition Instrumentation Software Requirements instrumentation Shall Be Able To Be Controlled Through An Application Programming Interface (api) By Software Code Running On The Test Bench. Navair’s Preferred Apis Are Those Standardized Interfaces Defined And Managed By The Interchangeable Virtual Instrument (ivi) Foundation (https://www.ivifoundation.org) Including The Following: vxi Plug & Play standard Commands For Programmable Instrumentation (scpi) virtual Instrument Software Architecture (visa) interchangeable Virtual Instrument (ivi) all Interested Parties Should Respond With Their Compliance With The Above Apis For Each Potential Offering. If A Vendor’s Instrument Is Not Compliant With The Above Apis, They Should State So And, Instead, Provide An Overview Of How To Programmatically Control Their Instrument, Including Any Required Drivers, Applications, Programming Languages, Operating Systems, Or Third-party Tools. in Addition To Expressing Interest And Providing The Requested Information, Include Estimated Price Details. The Government Is Seeking Unit Price And Lead Time For Each Type Of Rack Mounted Data Acquisition Instrument Type. Brochures, Manufacturing Capability And Capacity, And Past Performance Information May Be Included In The Rfi Response. to Assist In Our Market Research And Determination Of Any Applicable Small Business Set-aside For This Effort, If You Are A Small Business Interested In Priming This Effort And Plan To Utilize “similarly Situated Entities” To Meet The Limitations On Subcontracting, Please Identify The Name & Cage Code Of The Specific Firm(s) You Intend To Partner/subcontract With To Meet The Requirements As Well As Their Sb Size Status Under The Naics Code Assigned To This Notice. Information Regarding Any Planned Similarly Situated Entity Should Be Included In Answering Any Questions Outlined In This Rfi In Order To Assist The Government’s Capability Determination.  far 52.219-14 Limitation On Subcontracting Requires A Small Business Prime On A Set-aside To Perform At Least 50% Of The Cost Of Contract Performance.  Small Business Primes May Now Count “first Tier Subcontracted” Work Performed By Similarly Situated Entities As If It Were Performed By The Prime Itself. Please Read The Full Text Of The Clause Deviation (52.219-14 Class Deviation 2020-o0008 Dated 04/03/20 At Https://www.acquisition.gov/browse/index/far).   interested Sources Should Provide Rfi Responses And Related Data To The Pocs Identified Below, No Later Than 30 Days After The Post Date Of This Rfi. All Information Sent Should Reference This Rfi Number On The Subject Response Line Of The Emailed Response As Well As On All Enclosed Documents. Responses Must Include The Company Name, Address, Point Of Contact Name And Email/phone, And Company Size. Proprietary Data Must Be Marked On A Page-by-page Basis And Will Be Kept Confidential And Protected Where So Designated. Failure To Respond To This Rfi Does Not Preclude Participation In Any Future Rfp That May Be Issued. Any Comments Provided May Or May Not Be Included In A Formal Solicitation. Respondents May Provide Information And Rough Orders Of Magnitude (rom) On Any Currently Available Product Or A Company's' Capabilities That Will Meet The Navy's Requirements. responses Must Be Received No Later Than December 16th By 4pm Est.
Closing Date30 Jan 2025
Tender AmountRefer Documents 

City Of Valencia Tender

Civil And Construction...+1Road Construction
Philippines
Details: Description Contract Reference No. 01-2025 01/03/2025 Local Government Of Valencia Catarata Street, Poblacion, Valencia City, Bukidnon, Philippines Philippine Access (088) 828-5430 Invitation To Bid For The Road Concreting At Purok 2 To Purok 10, Barangay Pinatilan, Valencia City, Bukidnon 1. The City Government Of Valencia Through Its Annual Appropriations Intends To Apply The Sum Of Nine Million Five Hundred Twenty Thousand Seven Hundred Ninety Pesos And 82/100 (php 9,520,790.82) Being The Approved Budget Of The Contract (abc) To Payments Under The Contract For The Road Concreting At Purok 2 To Purok 10, Barangay Pinatilan, Valencia City, Bukidnon. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The City Government Of Valencia Now Invites Bids For The Road Concreting At Purok 2 To Purok 10, Barangay Pinatilan, Valencia City Bukidnon. Particulars Describes As Follows: Item No. Qty Unit Description Road Concreting At Purok 2 To Purok 10, Barangay Pinatilan, Valencia City, Bukidnon With The Following Scope Of Works: Concreting Of Road - 3m Width/lane, 0.23m Thick Pccp With Gravel Surface Shoulder - 1m B/s ;includes Cutting Of Trees & Removal Of Actual Structure/obstructions @ Sta. 0+654.44.00 - Sta. 0+661.29 Other General Requirements Project Billboards/signboards Occupational Safety And Health Program Traffic Management Mobilization / Demobilization Removal And Relocation Of Utilities/electrical Pole Civil Works Earthworks Specifications Unit Cost Total Cost 1 B.5 B.7(2) B.8(2) B.9 B.12 1 3 1 1 1 2 Lot Each Ls Ls Ls Each See Attached Plan And Specifications 9,520,790.82 100(1) 101(1) 102(2) 100(3)a2 104(1)a 105(1)a 0.13 1.99 1283.6 11 95.5 5352 Ha Cu.m Cu.m. Each Cu.m. Sq.m. 74,974.51 74,974.51 74,974.51 74,974.51 74,974.51 74,974.51 74,974.51 74,974.51 74,974.51 74,974.51 74,974.51 74,974.51 200(1) 802.80 Cu.m. Clearing And Grubbing Removal Of Structures And Obstruction (concrete) Surplus Common Excavation Individual Removal Of Trees 301-500mm Dia. (small) Embankment From Roadway Excavation (common Soil) Subgrade Preparation (common Material) Subbase And Base Course Aggregate Subbase Course Surface Courses Gravel Surface Course 300(1) 307.74 311(1)c1 4,022.48 Cu.m. Portland Cement Sq.m. Concrete Pavement (unreinforced) - 0.23m Thick 14days X-x-x-x-x-x-nothing Follows-x-x-x-x-x-x-x- X- Total Amount: 9,520,790.82 Required Number Of Days For Completion Is 100 Calendar Days. Bidders Should Have Completed A Contract Similar To The Project Within 10 Years From The Date Of Submission And Receipt Of The Bid Hereof. The Description Of An "eligible Bidder" Is Contained In The Bidding Documents, Particularly In Section Ii. Instructions To Bidders. 3. No Time Extension Shall Be Granted Unless On Fortuitous Event, Acts Of Nature Or Any Natural Calamities. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary "pass/fail" Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act". Bidding Is Restricted To Filipino Citizens, Sole Proprietorship, Partnerships, Or Organizations With At Least Seventy Five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. 5. Interested Bidders May Obtain Further Information From Josafat L. Caipang, Head Of Lgu-valencia City Bac Secretariat And Inspect The Bidding Documents At Address Given Below From Mondays-fridays 8:00 Am To 5:00 Pm. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders On January 4, 2025 To Opening Date From The Address Below And Upon Payment Of Non-refundable Fee For The Bidding Documents In The Amount Ten Thousand Pesos (php 10,000.00). It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) Provided That The Bidders Shall Pay The Non-refundable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. Site Inspection Is Required From Every Interested Bidder And Site Inspection Certificate Shall Form Part Of The Bid Documents. No Site Inspection Certificate Shall Mean Automatic Disqualification. Site Inspection Schedule Is On January 10, 2025 At 10:00 O’clock In The Morning, Assembly Area At Bac Office. 6. The City Government Of Valencia Will Hold Its Pre-bid Conference On January 13, 2025 (1:30 Pm) At The Bac Office, City Hall Compound, City Of Valencia, Bukidnon Which Shall Be Open To All Interested Bidders. 7. Only Project Engineers, Materials Engineer And The Like Are Required To Attend The Pre-bid Conference. In The Absence Of The Same, The Representative Must Present To The Bac An Authorization Letter Signed By The Owner. 8. Interested Contractor Are Required To Include In Their Technical Bid Proposal The Duly Signed List Of Contractor's Equipment Units, Which Are Owned, Leased And/or Under Purchase Agreements, Supported By Certification Of Availability Of Equipment From The Equipment Lessor/vendor For The Duration Of The Project. 9. Prospective Bidders Who Were Not Able To Purchase Bid Documents Prior To The Bid Opening Shall Not Be Opened And Will Be Disqualified. 10. Bids Must Be Delivered To The Address Below On Or Before (1:00 Pm) January 27, 2025. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms In The Amount Stated In Itb Clause 18. Bids Will Be Opened In The Presence Of The Bidders’ Representative Who Chooses To Attend At The Address Below. Bid Opening Shall Be On (1:30 Pm) January 27, 2025 At Bac Office, City Hall Compound, City Of Valencia, Bukidnon. Late Bids Shall Not Be Accepted. The Clock In The Bac Office Shall Serve As The Time Reference, And Shall Be The Basis For The Official Time Received Of The Bidding Documents Submitted In The Office. 11. The City Government Of Valencia Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expenses Incurred In The Preparation Of The Bid. 12. The Head Of The Procuring Entity (hope) Reserves The Right To Accept Or Reject Any Or All Bids To Annul The Bidding Process, At Any Time Prior To Contract Award Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. All Correspondence Shall Be Addressed To The Bac Secretariat, Attention: Mr. Abe P. Gillaco, Mpa, Bac Chairman. 14. For Further Information, Please Refer To: Lgu Valencia City-josafat L. Caipang Admin Office, 8709 Catarata St., Poblacion, Valencia City, Bukidnon Tel. No. (088) 828-5430 Abe P. Gillaco, Mpa Bac Chairman
Closing Date27 Jan 2025
Tender AmountPHP 9.5 Million (USD 164 K)

Department Of Agriculture Tender

Chemical Products
Philippines
Details: Description Invitation To Bid For The Procurement Of 1 Unit Perchloric Fumehood (47" Or 120 Cm Width To Fit With Existing Space In The Laboratory) 1. The Department Of Agriculture-regional Field Office 7, Will Conduct A Public Bidding Through Early Procurement Activities (epa) Of National Expenditure Plan (nep) For Fiscal Year 2025 (gaa 2025) And Intends To Apply The Sum Of One Million Six Hundred Forty Thousand Pesos (₱1,640,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Procurement Of 1 Unit Perchloric Fumehood (47" Or 120 Cm Width To Fit With Existing Space In The Laboratory). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Department Of Agriculture – Rfo 7 Is Conducting This Procurement Through The Early Procurement Activity (epa) For National Expenditure Plan (nep) For Fiscal Year 2025 (gaa 2025) To Ensure The Timely Delivery Of Goods, Implementation Of Infrastructure Projects And Rendition Of Consultancy Services Where The Procuring Entity (pe) Is Encouraged To Start Procurement Activity Short Of Award. 3. Epa Shall Refer To The Conduct Of Procurement Activities, From Posting Of The Procurement Opportunity, If Required, Until Recommendation Of The Bids And Awards Committee (bac) To The Hope As To The Award Of The Contract, For Goods To Be Delivered, Infrastructure Projects To Be Implemented And Consulting Services To Be Rendered In The Following Fiscal Year (i.e., Fy 2021), Pending Approval Of Their Respective Funding Sources. The Bidders, Therefore, Are Herewith Informed Of The Following: A. Interested Bidders Are Invited/requested To Submit Their Bid Proposals Based On Indicative Budget (i.e. Subject To Final Approval) Through This Invitation To Bid, Together With The Bidding Documents; B. The Pe Will Evaluate The Bid Proposals And Determine The Winning Bidder. The Financial Bid Proposal Of The Winning Bidder Will Be Contract Price/amount Which Is Considered Fixed Price. However, The Notice Of Award (noa) Will Only Be Issued Upon The Approval Of The Budget (i.e., Short Of Award); And C. Would There Be A Delay In The Award As Affected By The Possible Delay In The Budget Approval, The Bid Validity As Specified In The Bidding Documents (which Is A Maximum Of 120 Calendar Days), The Winning Bidder May Be Requested To Extend The Bid Validity Accordingly (that Is, Changing The Expiration Of The Original Bid Security). In Case Of The Bidder’s Refusal To Extend The Bid Validity, The Bid Submitted By Said Bidder Will Be Rejected. 4. The Department Of Agriculture-regional Field Office 7 Now Invites Bids For The Procurement Of 1 Unit Perchloric Fumehood (47" Or 120 Cm Width To Fit With Existing Space In The Laboratory) @ 1,640,000.00 With The Following Details/specifications: * With Wash Down System Or Spray Bar On Fume Cupboard; * Worktop & Sump Made Of Acid Resistant, Non-combustible Trespa Material, Minimum Of 13 Mm Thickness With Slots; * Inner Chamber Moulded Of Chemical Resistant, Corrosion Resistant, Temperature & Humidity Resistant & Fire Retardant Glass Reinforced Plastic (grp); * With 0.75kw Motor And Chemical Resistant Exhaust Fan Or Blower, 10""; * Toughened Glass 6mm Sash; * Control Panel With Lcd Display For Real Time Air Flow Monitoring, Light, Emergency Alarm & Other Functions; * Aerodynamic Design For Maximum Containment; * Certifications And Accreditations To Ensure Durability & Quality Such As: - Fume Cupboards Compliant To Us/australian Third Party Product Registration By Sai Global; - Third Party Accreditation With Astm/nata For Fume Cupboard Testing; - Third Party Accreditation With Sai Global For Iso 9000 Quality Systems. * Free Installation And Commissioning Included Utilizing The Existing Piping System (with Modification) For Ducting By Trained Service Engineer; All Materials Needed Will Be Provided Including Electrical Materials; * To Include Free Dismantling Of Old Fumehood Where The New Unit Will Be Installed; * Warranty Period Of 1 Year Or More; * Free Preventive Maintenance Within Warranty Period Or Beyond Warranty Period; * With Compatible Avr. Delivery Site: Regional Soils Laboratory, Da7 Complex, Maguikay, Mandaue City, Cebu Delivery Of The Goods Is Required Within 90 Calendar Days From The Receipt Of Approved Notice To Proceed (ntp). Bidders Should Have Completed, Within Five Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 5. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non- Discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 6. Prospective Bidders May Obtain Further Information From Department Of Agriculture- Regional Field Office 7- Bac 2 Secretariat Through The Contact Details Given Below And Inspect The Bidding Documents As Posted On The Philippine Government Electronic Procurement System (philgeps). 7. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 13, 2024 From The Given Address Below And Upon Payment Of Non-refundable Bid Document Fee The Amount Of Five Thousand Pesos (₱5,000.00) (based On Appendix 8 - Guidelines On The Sale Of Bidding Documents Of The 2016 Revised Irr Of 9184 Updated As Of January 31, 2023. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Which Will Be Presented In Person, By Facsimile, Or Through Electronic Means. 8. The Department Of Agriculture-regional Field Office 7, Will Hold A Pre-bid Conference On December 23, 2024 -2:00 P.m. At Da Conference Room, Da Complex, Highway Maguikay, Mandaue City, Which Shall Be Open To Prospective Bidders. Electronic Pre-bidding May Not Available For This Procurement Opportunity. 9. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before January 7, 2025 - 10:00 A.m. Late Bids Shall Not Be Accepted. 10. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 11. Bid Opening Shall Be On January 7, 2025 - 10:00 A.m. At Da-rfo 7 Conference Room, Da Complex, Highway Maguikay, Mandaue City. Bids Will Be Opened In The Presence Of The Bidders Or Bidder’s Authorized Representatives Who Choose To Attend The Activity. Electronic Bidding May Not Available For This Procurement Opportunity. 12. The Department Of Agriculture Does Not Condone Any Form Of Solicitation On Any Prospective Winning And Losing Bidders By Any Of Our Staff/employees Or Any Other Party. Any Sort Of This Kind Shall Be Reported Immediately To The Office Of The Secretary Or The National Bureau Of Investigation (nbi) For Entrapment And Proper Investigation. 13. The Department Of Agriculture Regional Field Office 7 (da-rfo 7) Reserves The Right To Reject Any And All Bids, Annul The Bidding Process, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 14. For Further Information, Please Refer To: Bac 2 / Procurement Section Department Of Agriculture Regional Field Office-7 Telefax No. 032-2682698 Or 032-345-3483 December 13, 2024 (sgd.) Rtd Wilberto O. Castillo, Ph.d. Bac Chairperson
Closing Soon7 Jan 2025
Tender AmountPHP 1.6 Million (USD 28.2 K)

PUBLIC BUILDINGS SERVICE USA Tender

Real Estate Service
Corrigendum : Closing Date Modified
United States
Details: This Advertisement Is Hereby Incorporated Into The Rlp 24-reg02 By Way Of Reference As An Rlp Attachment. u.s. Government Seeks To Lease The Following Office Space Through The Automated Advanced Acquisition Program (aaap): city: Mountainside state: New Jersey delineated Area: north: Fairmount Ave To Route 124 To John F Kennedy Parkway To Route 510 east: Route 510 To Garden State Parkway To Elizabeth River To Route 439/elmora Ave south: Route 439/elmora Ave To Westfield Ave To North Ave west: North Ave To Mountain Ave To Us Highway 22 To Union Ave To New Providence Road/diamond Hill Road/union Ave To Springfield Ave To Central Ave To Fairmount Ave minimum Aboa Square Feet: 11,150 maximum Aboa Square Feet: 11,373 space Type: Office And Specialized Space lease Term: 17 Years, 15 Firm parking Requirement: 13 Reserved Spaces offerors Are Encouraged To Submit Rates For All Terms Available In The Aaap For Consideration Against Future Gsa Requirements. amortization Term: 8 Years For Both Tenant Improvementsand Building Specific Amortized Capital. agency Unique Requirements agency Tenant Improvement Allowance: existing Leased Space: $66.04 Per Aboa Sf other Locations Offered: $66.04 Per Aboa Sf building Specific Amortized Capital (bsac): existing Leased Space: $12.00 Per Aboa Sf other Locations Offered: $12.00 Per Aboa Sf other Unique Requirements: the Government Requires 24/7 Access To The Premises And Its Appurtenant Areas the Building Must Be At Least 1,000 Feet Away From Schools, Daycares And Parks. the Building Must Be Located Within A Walkable Half Mile Of Mass Transit Stops. the Tenant Requires A Secured Path Of Travel To Transport Detainees Into The Building. Access To A Non-public Elevator, Such As A Freight Elevator, Is Preferred, For This Purpose the Offered Space Is To Be Contiguous On One Floor, Located On Or Above The 2nd Floor. The Space Must De Demised Into Three Suites Within Their Own Separate Entrances. Demising Walls May Require Slab-to-slab Construction. if All Office Space Cannot Be Contiguous On One Floor: a Contiguous Block Of Space Of At Least 3,000 Aboa Sf Must Be Located On Or Above The 2nd Floor. a Contiguous Block Of Space Of At Least 4,800 Aboa Sf Must Be Contiguous On One Floor And Can Be Located On Any Above-ground Floor. a Contiguous Block Of Space Of At Least 3,350 Aboa Sf Must Be Contiguous On One Floor And Can Be Located On Any Above-ground Floor. thirteen (13) Reserved Spaces For Official Government Vehicles. In Addition, The Lessor Shall Provide A Pro-rata Share Of Parking Spaces As Required By The Applicable Code Of The Local Government Entity Having Jurisdiction Over The Property. structured Parking Preferred But Not Mandatory. the Governmentrequires A Standard Server Rack In A Secured Room Or Areawith Proper Ventilation And Dedicated Electrical Services For The Agency's Server Equipment. the Government Is Assigned A Facility Security Requirements Level Ii. Refer To The Aaap Website Published Rlp Attachment Titled "facility Security Requirements - Level Ii" For More Detail. important Notes check The Attachments And Links Section Of This Notice For Possible, Additional Project-specific Requirements Or Modifications To The Rlp. offerors Are Advised To Familiarize Themselves With The Telecommunications Prohibitions Outlined Under Section 889 Of The Fy19 National Defense Authorization Act (ndaa), As Implemented By Federal Acquisition Regulation (far). For More Information, Visit: Https://acquisition.gov/far-case-2019-009/889_part_b offerors Are Advised That All Shell Work Associated With Delivering The Tenant Improvements Are At The Lessor’s Cost. Please Refer To Section 3(construction Standards And Shell Components)and Specifically To Paragraph 3.07(building Shell Requirements)of Theaaap Rlp Attachment #2 Titled "lease Contract" (gsaform L100_aaap ) For More Detail. Tenant Improvement Components Are Detailed Under Section 5 Of The Aaap Rlp Attachment#2 Titled "lease Contract" (gsaform L100_aaap) . it Is Highly Recommended That Offerors Start The Sam Registration Process Directly Following The Offer Submission. Refer To Rlp Clause 3.06. (if Applicable) The Government Intends To Award A Lease To An Offeror Of A Building That Is In Compliance With Seismic Standards. Section 2.03 Of The Request For Lease Proposals (rlp) Outlines Compliance Activities Required For All Leases In Moderate Or High Seismic Zones. To Determine If Your Property Lies In A Moderate Or High Zone, Please Reference The Map And Documents On Our Website. how To Offer the Automated Advanced Acquisition Program (aaap), Located At Https://leasing.gsa.gov/, Will Enable Interested Parties To Offer Space For Lease To The Federal Government In Response To The Fy24 Aaap Rlp. In Addition, The Government Will Use Its Aaap To Satisfy The Above Space Requirement. offerors Must Go To The Aaap Website, Select The “register To Offer Space” Link And Follow The Instructions To Register. Instructional Guides And Video Tutorials Are Offered On The Aaap Homepage And In The “help” Tab On The Aaap Website. Once Registered, Interested Parties May Enter Offers During Any “open Period”. For Technical Assistance With Aaap, Email Lop.help@gsa.gov. the Open Period Is The 1st Through The 7th Of Each Month, Ending At 7:30 P.m. (et) Unless Otherwise Stated By The Government And Unless The 7th Falls On A Weekend Or Federal Holiday. If The 7th Falls On A Weekend Or Federal Holiday, The Open Period Will End At 7:30 Pm (et) On The Next Business Day. Refer To Aaap Rlp Paragraph 3.02 For More Details On The Offer Submission Process. The Government Reserves The Right To Allow For Multiple Open Periods Prior To Selecting An Offer For Award To Meet This Specific Space Requirement. Offers Cannot Be Submitted During The Closed Period And Will Not Be Considered For Projects Executed During That Time Period. lease Award Will Be Made To The Lowest Price, Technically Acceptable Offer, Without Negotiations, Based Upon The Requirements In This Advertisement And In The Rlp Requirements Package Found On The Aaap Website. During An Open Period, Offerors Will Be Permitted To Submit New Offers Or Modify Existing Offers. Offerors Can Draft An Offer At Any Time; However, You Can Only Submit An Offer During The Open Period. the Offered Space Must Comply With The Requirements In This Advertisement And The Rlp And Must Meet Federal Government, State, And Local Jurisdiction Requirements, Including Requirements For Fire And Life Safety, Security, Accessibility, Seismic, Energy, And Sustainability Standards In Accordance With The Terms Of The Lease. The Lease And All Documents That Constitute The Lease Package Can Be Found At Https://leasing.gsa.gov/leasing/s/aaap-portalhome. if You Have Previously Submitted An Offer In Fy 2023, The Aaap Application Has A Copy Feature Which Will Allow Existing Offers To Be Copied Over To The Fy 2024 Rlp In Order To Avoid Having To Re-enter All Of The Data Manually. Please Be Sure To Review Fy24 Aaap Rlp Package And Each Page Within The Aaap Application Prior To Submitting Your Offer As Some Of The Questions Have Changed. You Must Re-enter Your Space And Rates On The ‘space And Rates’ Tab In The Aaap. Your Previous Offered Space Will Not Be Copied.
Closing Soon8 Jan 2025
Tender AmountRefer Documents 

City Of Valencia Tender

Civil And Construction...+1Road Construction
Philippines
Details: Description 1. 2. The City Government Of Valencia Through Its Annual Appropriations Intends To Apply The Sum Of One Million Nine Hundred Forty Thousand Nine Hundred Eighteen Pesos And 46/100 (php 1,940,918.46) Being The Approved Budget Of The Contract (abc) To Payments Under The Contract For The Road Concreting At Purok 2, Barangay Bagontaas, Valencia City, Bukidnon. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The City Government Of Valencia Now Invites Bids For The Road Concreting At Purok 2, Barangay Bagontaas, Valencia City, Bukidnon. Particulars Describes As Follows: Local Government Of Valencia Catarata Street, Poblacion, Valencia City, Bukidnon, Philippines Philippine Access (088) 828-5430 Invitation To Bid For The Road Concreting At Purok 2, Barangay Bagontaas, Valencia City, Bukidnon Contract Reference No. 04-20225 01/03/2025 Item No. Qty 1.00 Unit Description Road Concreting At Barangay Bagontaas (near Hotel De Susana), Valencia City, Bukidnon With The Following Scope Of Works: Station 0+285.00 - Station 0+406.10 (121.10 L.m.) Concreting Of Road - 3m Width/lane, 0.23m Thick Pccp With Gravel Surface Shoulder - 1m B/s; Includes Removal And Relocation Of 2 Unit Electrical Pole And Installation Of 8 L.m. 910mm Rcpc Cross Drain @ Station 0+404.00. Other General Requirements Project Billboards/signboards Occupational Safety And Health Program Traffic Management Mobilization / Demobilization Removal And Relocation Of Utilities Civil Works Earthworks Clearing And Grubbing Foundation Fill Subgrade Preparation (common Material) Subbase And Base Course Aggregate Subbase Course Surface Courses Gravel Surface Course Portland Cement Concrete Pavement (unreinforced) - 0.23m Thick 14days Specifications Unit Total Cost Cost 1,940,918.46 1 Lot See Attached Plan And Specifications B.5 B.7(2) B.8(2) B.9 B.12 100(1) 103(3) 2.00 1.00 1.00 1.00 2.00 0.05 0.80 Each Ls Ls Ls Each Ha Cu.m. Sq.m. Cu.m. Cu.m. Sq.m. 105(1)a 1,089.90 200(1) 145.32 300(1) 55.70 311(1)c 1 726.60 500(1)b 3 8.00 L.m. 506(1) 2.87 Cu.m. Drainage And Slope Protection Structures Pipe Culverts, 910mm Dia. - Class Ivrcpc Stone Masonry X-x-x-x-x-x-nothing Follows-x-x-x-x-x-x-x-x- Total Amount 1,940,918.46 Required Number Of Days For Completion Is 50 Calendar Days. Bidders Should Have Completed A Contract Similar To The Project Within 10 Years From The Date Of Submission And Receipt Of The Bid Hereof. The Description Of An "eligible Bidder" Is Contained In The Bidding Documents, Particularly In Section Ii. Instructions To Bidders. 3. No Time Extension Shall Be Granted Unless On Fortuitous Event, Acts Of Nature Or Any Natural Calamities. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary "pass/fail" Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act". Bidding Is Restricted To Filipino Citizens, Sole Proprietorship, Partnerships, Or Organizations With At Least Seventy Five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. 5. Interested Bidders May Obtain Further Information From Josafat L. Caipang, Head Of Lgu-valencia City Bac Secretariat And Inspect The Bidding Documents At Address Given Below From Mondays-fridays 8:00 Am To 5:00 Pm. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders On January 4, 2025 To Opening Date From The Address Below And Upon Payment Of Non-refundable Fee For The Bidding Documents In The Amount Five Thousand Pesos (php 5,000.00). It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) Provided That The Bidders Shall Pay The Non-refundable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. Site Inspection Is Required From Every Interested Bidder And Site Inspection Certificate Shall Form Part Of The Bid Documents. No Site Inspection Certificate Shall Mean Automatic Disqualification. Site Inspection Schedule Is On January 10, 2025 At 10:00 O’clock In The Morning, Assembly Area At Bac Office. 6. The City Government Of Valencia Will Hold Its Pre-bid Conference On January 13, 2025 (1:30 Pm) At The Bac Office, City Hall Compound, City Of Valencia, Bukidnon Which Shall Be Open To All Interested Bidders. 7. Only Project Engineers, Materials Engineer And The Like Are Required To Attend The Pre-bid Conference. In The Absence Of The Same, The Representative Must Present To The Bac An Authorization Letter Signed By The Owner. 8. Interested Contractor Are Required To Include In Their Technical Bid Proposal The Duly Signed List Of Contractor's Equipment Units, Which Are Owned, Leased And/or Under Purchase Agreements, Supported By Certification Of Availability Of Equipment From The Equipment Lessor/vendor For The Duration Of The Project. 9. Prospective Bidders Who Were Not Able To Purchase Bid Documents Prior To The Bid Opening Shall Not Be Opened And Will Be Disqualified. 10. Bids Must Be Delivered To The Address Below On Or Before (1:00 Pm) January 27, 2025. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms In The Amount Stated In Itb Clause 18. Bids Will Be Opened In The Presence Of The Bidders’ Representative Who Chooses To Attend At The Address Below. Bid Opening Shall Be On (1:30 Pm) January 27, 2025 At Bac Office, City Hall Compound, City Of Valencia, Bukidnon. Late Bids Shall Not Be Accepted. The Clock In The Bac Office Shall Serve As The Time Reference, And Shall Be The Basis For The Official Time Received Of The Bidding Documents Submitted In The Office. 11. The City Government Of Valencia Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expenses Incurred In The Preparation Of The Bid. 12. The Head Of The Procuring Entity (hope) Reserves The Right To Accept Or Reject Any Or All Bids To Annul The Bidding Process, At Any Time Prior To Contract Award Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. All Correspondence Shall Be Addressed To The Bac Secretariat, Attention: Mr. Abe P. Gillaco, Mpa, Bac Chairman. 14. For Further Information, Please Refer To: Lgu Valencia City-josafat L. Caipang Admin Office, 8709 Catarata St., Poblacion, Valencia City, Bukidnon Tel. No. (088) 828-5430 Abe P. Gillaco, Mpa Bac Chairman
Closing Date27 Jan 2025
Tender AmountPHP 1.9 Million (USD 33.4 K)

DEPT OF THE NAVY USA Tender

Machinery and Tools...+1Aerospace and Defence
United States
Details: This Is A Request For Information (rfi) Only. There Is No Solicitation Package Available. the Naval Air Warfare Center, Aircraft Division (nawcad) Lakehurst, Nj Is Issuing This Request For Information Notice To Conduct Market Research To Identify Potential Sources And Request Information For A Potential Procurement Of Rack Mounted Analog Discrete Input Measurement Instruments For The Engine Test Instrumentation Replacement System (etirs). The Instrumentation Must Meet Various Functions, And Each Instrument Can Fulfill One Or Multiple Functional Requirements. this Is A Request For Information Only – Not A Request For Proposal. This Rfi Is Issued For The Purpose Of Determining Market Interest, Feasibility, And Capability Of Sources And Does Not Constitute A Request For Proposal Or Commitment By The Government. this Rfi Is Issued Sole For The Market Research Information And Planning Purposes And Does Not Constitute A Solicitation.  information Herein Is Based On The Best Information Available At The Time Of Publication, Is Subject To Revision, And Is Not Binding Upon The Government.  no Reimbursement Will Be Made Of Any Costs To Provide Information In Response To This Rfi Or Any Follow-up Information Requests. this Rfi Is A Market Research Tool Being Used To Determine Potential And Eligible Vendors Capable Of Meeting The Requirements Described Herein Prior To Determining The Method Of Acquisition And Issuance Of A Request For Proposal. In Accordance With Far 15.201(e), Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract.  navair Is Requesting Information On The Industry’s Capability Of Manufacturing Commercial Off The Shelf (cots) Or Modified Cots (mcots) Rack Mounted Analog Vibration Measurement Instruments That Meet Or Exceed The Requirements Below. the Rack Mounted Analog Vibration Measurement Instruments Shall Meet Or Exceed The Performance/environmental Requirements Shown In The Following Functional Breakdown: instrumentation Performance Requirements analog Vibration Measurement Performance Requirements ** Refer To The Tables In The Attached Instrumentation Characteristics Excel File For All Performance Requirements. The Performance Specification Is Export-controlled. In Order To Receive A Copy Of The Performance Specification Interested Respondents Must Be U. S. Dod Contractors. Interested Respondents Must Provide The Contracting Office Point Of Contact Identified Below With A Copy Of Their Current, Approved Form Dd2345, 'militarily Critical Technical Data Agreement'. Once Received And Current Jcp Certification Verified By Navair, The Draft Performance Specification Will Be Transmitted To You From Navair Via The Dod Safe System, To The Data Custodian You Have Identified On The Dd Form 2345. Contractors Must Request The Draft Performance Specification In Writing From Mr. Justin Panecki, Justin.p.panecki2.civ@us.navy.mil. acquisition Instrumentation Environmental Requirements the System’s Equipment Design, Located Outside The Instrument And Control Room (i&c Cab), Shall Meet Class 1 Environmental Requirements As Defined In Table 2 Of Mil-prf-28800. the System’s Equipment, Within The Instrument And Control Room (i&c Cab) Boundary, Design Shall Meet The Temperature And Humidity Requirements Of Class 4 Equipment In Section 3.9.2 Of Mil-prf-28800. the System Shall Be Fully Operational During The Expected Shipboard Deck Environmental Vibration Levels As Described Per Mil-std-167-1a, Type 1 - Environmental Vibration. the System’s Equipment Design Shall Comply With The Requirement Matrix For Navy Surface Ships And Navy Ground In Table 5 Of Mil-std-461 Or Equivalent. cs115 (conducted Susceptibility, Bulk Cable Injection, Impulse Excitation) And Cs118 (personnel Borne Electrostatic Discharge) Are Specified As Applicable. navair Is Requesting The Following Information From Industry Vendors To Demonstrate How They Can Meet The Requirements Listed Above: vendor Capability. vendor Capacity. documentation Demonstrating That The Vendor Is Capable Of Manufacturing Cots And/or Modified Cots Rack Mounted Instruments. Documentation Demonstrating That The Vendor Is Capable To Sustain The Product. any Information On Past Performance Of Similar Efforts. a Technical Data Sheet Describing The Electrical And Performance Characteristics Of The Instruments. the Vendors May Also Respond With A Presentation Of 5 Slides Or Less With A Specific Focus On Explanation Of Data Sheets And Instrument Performance In Relation To Gfi Requirements. navair Is Requesting The Following Information From Industry Vendors To Comprehend The Logistics Impacts Associated To Each Instrument: how Long Will The Product Be Supported For Procurement And Repair? does The Product Require Calibration? if So, Does The Product Require Additional Equipment/tools To Calibrate? all Interested Parties Should Have The Following: a Quality Assurance Program Compliant With Iso9001 Or Equivalent. test Data Demonstrating That The Above Performance And Environmental Requirements Have Been Met With The Proposed Rack Mounted Analog Vibration Measurement Instruments. acquisition Instrumentation Software Requirements instrumentation Shall Be Able To Be Controlled Through An Application Programming Interface (api) By Software Code Running On The Test Bench. Navair’s Preferred Apis Are Those Standardized Interfaces Defined And Managed By The Interchangeable Virtual Instrument (ivi) Foundation (https://www.ivifoundation.org) Including The Following: vxi Plug & Play standard Commands For Programmable Instrumentation (scpi) virtual Instrument Software Architecture (visa) interchangeable Virtual Instrument (ivi) all Interested Parties Should Respond With Their Compliance With The Above Apis For Each Potential Offering. If A Vendor’s Instrument Is Not Compliant With The Above Apis, They Should State So And, Instead, Provide An Overview Of How To Programmatically Control Their Instrument, Including Any Required Drivers, Applications, Programming Languages, Operating Systems, Or Third-party Tools. in Addition To Expressing Interest And Providing The Requested Information, Include Estimated Price Details. The Government Is Seeking Unit Price And Lead Time For Each Type Of Rack Mounted Data Acquisition Instrument Type. Brochures, Manufacturing Capability And Capacity, And Past Performance Information May Be Included In The Rfi Response. to Assist In Our Market Research And Determination Of Any Applicable Small Business Set-aside For This Effort, If You Are A Small Business Interested In Priming This Effort And Plan To Utilize “similarly Situated Entities” To Meet The Limitations On Subcontracting, Please Identify The Name & Cage Code Of The Specific Firm(s) You Intend To Partner/subcontract With To Meet The Requirements As Well As Their Sb Size Status Under The Naics Code Assigned To This Notice. Information Regarding Any Planned Similarly Situated Entity Should Be Included In Answering Any Questions Outlined In This Rfi In Order To Assist The Government’s Capability Determination.  far 52.219-14 Limitation On Subcontracting Requires A Small Business Prime On A Set-aside To Perform At Least 50% Of The Cost Of Contract Performance.  Small Business Primes May Now Count “first Tier Subcontracted” Work Performed By Similarly Situated Entities As If It Were Performed By The Prime Itself. Please Read The Full Text Of The Clause Deviation (52.219-14 Class Deviation 2020-o0008 Dated 04/03/20 At Https://www.acquisition.gov/browse/index/far).   interested Sources Should Provide Rfi Responses And Related Data To The Pocs Identified Below, No Later Than 30 Days After The Post Date Of This Rfi. All Information Sent Should Reference This Rfi Number On The Subject Response Line Of The Emailed Response As Well As On All Enclosed Documents. Responses Must Include The Company Name, Address, Point Of Contact Name And Email/phone, And Company Size. Proprietary Data Must Be Marked On A Page-by-page Basis And Will Be Kept Confidential And Protected Where So Designated. Failure To Respond To This Rfi Does Not Preclude Participation In Any Future Rfp That May Be Issued. Any Comments Provided May Or May Not Be Included In A Formal Solicitation. Respondents May Provide Information And Rough Orders Of Magnitude (rom) On Any Currently Available Product Or A Company's' Capabilities That Will Meet The Navy's Requirements. responses Must Be Received No Later Than December 16th 2024 By 4pm Est.
Closing Date30 Jan 2025
Tender AmountRefer Documents 

VETERANS AFFAIRS, DEPARTMENT OF USA Tender

Civil And Construction...+2Others, Civil Works Others
United States
Description: Project Labor Agreements (pla S) Survey And Request For Contractor Capability Statement Package this Is A Sources Sought Notice For Market Research Only. no Award Will Be Made From This Sources Sought Notice. this Sources Sought Notice (ssn) Is For Market Research Purposes In Accordance With Federal Acquisition Regulation (far) Part 10 And Far 15.201(e), To Determine The Availability And Technical Capabilities Of Qualified Sources. It Does Not Constitute A Solicitation And Is Not To Be Considered As A Commitment By The Government. All Firms Responding To This Notice Are Advised That Their Response To This Notice Is Not A Request That Will Be Considered For Contract Award. All Interested Parties Will Be Required To Respond To The Resultant Solicitation Separately From Their Response To This Notice. jefferson Barracks National Cemetery, sylvan Springs, Phase 1a Expansion project Scope the U.s. Department Of Veterans Affairs (va) Seeks Expressions Of Interest For A Construction Contract At Jefferson Barracks National Cemetery, Sylvan Springs, Phase 1a Expansion With The Use Of A Project Labor Agreement (pla). The North American Industry Classification System (naics) Of 237990 (other Heavy And Civil Engineering Construction) With The Size Standard Of $45.0 Million. The Approximate Project Duration Will Be 912 Calendar Days From The Notice To Proceed. The Estimated Magnitude For This Project Is Between $50,000,000 And $100,000,000. Va Is Considering Conducting This Acquisition As A Best Value With Tradeoffs In Accordance With Far Part 15, Contracting By Negotiation. project Description: the Purpose Of This Phase 1a Expansion Project For Jefferson Barracks National Cemetery Is To Enable The Existing National Cemetery To Continue To Provide Burial Services For Eligible Veterans In Missouri. Jefferson Barracks National Cemetery Is Located Near St. Louis, Missouri. the National Cemetery Administration (nca) Contracted This 33.6-acre Cemetery Expansion Project To Increase Burial Capacity Of Jefferson Barracks National Cemetery (jbnc) To Serve Veterans In The St. Louis Area. This Cemetery Expansion Project Identified On New Land. The Proposed Development Will Provide Continued Service To An Estimated Fiscal Year (fy) 2024 Veteran Population Of Approximately 208,000 Within A 75-mile Service Area. This Proposed Development Will Provide An Additional 15 Years Of Continued Burial Service To A Veteran Population Who Has Been Served By This National Cemetery Since 1827. this Project Will Provide For An Additional 15-year Inventory Of The More Efficient Casketed, Double-depth, Pre-placed Crypts Before Depletion Of The Current Inventory, And Extend The Full Range Of Burial Options Until Fy 2044, As Well As Provide Several Nominal Cemetery Operational And Infrastructure Improvements Within The Older Cemetery Grounds. this Project Will Provide For The Following Elements And Features: base Bid General Construction: the Base Bid Work Of This Contract Includes Phased Requirements. These Phases Are Referred To As Eto And Remainder Of The Work. The Eto Shall Be Completed Within The Established Time Frame Indicated In The Contract. Completion Of The Eto Work Will Follow Procedures Like Those For Final Completion And Acceptance, With The Facilities Within The Eto Being Completed And Turned Over To The Cemetery For Use To Begin Operation Of The Cemetery While The Remaining Work Is Completed. Eto Shall Be Completed And Accepted By Nca For Operation Within 252 Calendar Days From Notice To Proceed. While The Work Of The Eto Is Being Performed, Work For The Remainder Of The Project Can Also Be Performed. work Of The Contract Includes Site Demolition, General Construction, Relocation And Installation Of New Site Utilities, Installation Of Pre-placed Burial Crypts, Columbarium Niches, Roadway Improvements, New Roads, Walks, Grading, Drainage, Site Furnishings, Landscaping And Irrigation Necessary Removal Of Existing Structures And Construction And Certain Other Items And All Other Work Necessary To Construct The Project. The Contractor Shall Obtain State/local Construction Permitting As Required And Conduct All Protected Habitat Preservation, Wetlands, And Mitigation Efforts As Required To Meet Governing Body Mandates. By The End Of The Performance Period All Work Shall Be Satisfactorily Completed And Ready For Custody, Transfer, And Acceptance By Nca. All Punch List Items Shall Be Satisfactorily Addressed, All Commissioning Completed, And All Training Accomplished. replace And Upgrade Carpeting And Painted Finishes In The Administration/ Pic Building. Replace Select Electrical Service Panels In Maintenance Buildings 3001, 3002, And 3003. interment Areas: casketed Remains: a) Approximately 18,500 Pre-placed Crypt Full Casket Gravesites b) Approximately 2,100 Traditional Casket Gravesites cremated Remains: a) Approximately 10,900 In-ground Cremation b) Approximately 5,000 Columbarium Niches base Bid Furnish Pre-placed Crypts: procure, Manufacture, Deliver, Off-load And Store Furnish And Deliver To The Site All Pre-placed Crypts. additive Items Subject To Budget Adequacy: additive #1 Maintenance Yard: install Maintenance Storage Yard And Associated Site Work, Including But Not Limited To Pavements, Curbs, Drainage, Fencing And Gates, Signage, Landscaping, And Irrigation. additive #2 Storage Building: install Maintenance Material Storage Building Including But Not Limited To Sitework, Pavements, Curbing, Concrete Foundations, Concrete Walls, Structural Steel, And Standing Seam Metal Roofing. additive #3 Satellite Maintenance Building: install Satellite Maintenance Building And Associated Site Work Including But Not Limited To Sitework, Utilities, Concrete Foundations, Concrete Slab, Engineered Metal Building, Hvac System, Concrete Masonry Walls, Metal Wall Panels, Standing Seam Metal Roof, Doors, Windows, Interior Finishes, Landscaping, Irrigation, Signage And All Other Work Necessary To Construct The Building. additive #4 Demolish/replace Committal Shelter #4: demolish And Replace Committal Shelter #4(in Main Cemetery) Along With Associate Sitework, Concrete Foundations, Concrete Piers, Curbs, Paving, Standing Seam Metal Roof, Landscaping, Irrigation, Site Furniture And Signage. --- End Of Project Scope --- project Labor Agreement (pla): a Pla Is Defined As A Pre-hire Collective Bargaining Agreement With One Or More Labor Organizations That Establishes The Terms And Conditions Of Employment For A Specific Construction Project And Is An Agreement Described In 29 U.s.c. 158(f). federal Acquisition Regulation (far) 22.503 Policy: (a) Project Labor Agreement (pla) Is A Tool That Agencies May Use To Promote Economy And Efficiency In Federal Procurement. Pursuant To Executive Order 13502, Agencies Are Encouraged To Consider Requiring The Use Of Project Labor Agreements In Connection With Large-scale Construction Projects. (b) An Agency May, If Appropriate, Require That Every Contractor And Subcontractor Engaged In Construction On The Project Agree, For That Project, To Negotiate Or Become A Party To A Project Labor Agreement With One Or More Labor Organizations If The Agency Decides That The Use Of Project Labor Agreements Will- (1) Advance The Federal Government's Interest In Achieving Economy And Efficiency In Federal Procurement, Producing Labor-management Stability, And Ensuring Compliance With Laws And Regulations Governing Safety And Health, Equal Employment Opportunity, Labor And Employment Standards, And Other Matters; And (2) Be Consistent With Law. (c) Agencies May Also Consider The Following Factors In Deciding Whether The Use Of A Project Labor Agreement Is Appropriate For The Construction Project: (1) The Project Will Require Multiple Construction Contractors And/or Subcontractors Employing Workers In Multiple Crafts Or Trades. (2) There Is A Shortage Of Skilled Labor In The Region In Which The Construction Project Will Be Sited. (3) Completion Of The Project Will Require An Extended Period Of Time. (4) Project Labor Agreements Have Been Used On Comparable Projects Undertaken By Federal, State, Municipal, Or Private Entities In The Geographic Area Of The Project. (5) A Project Labor Agreement Will Promote The Agency S Long Term Program Interests, Such As Facilitating The Training Of A Skilled Workforce To Meet The Agency S Future Construction Needs. (6) Any Other Factors That The Agency Decides Are Appropriate. see Far Provision: 52.222-33 Notice Of Requirement For Project Labor Agreement And Far Clause 52.222-34 Project Labor Agreement For Further Details. project Labor Agreement (pla) Questionnaire (please Respond To The Questions Below) 1. Is Your Company Familiar With Project Labor Agreement (pla) And Its Use On Construction Projects? yes/no comments: 2. Would Your Company Likely Submit A Proposal For The Va Construction Solicitation That Requires The Use Of A Pla? yes/no comments: 3. If Va Requires A Pla, Would Your Proposed Construction Cost Likely To Increase Or Decrease And What Is The Likely Percentage Of Cost Increase Or Decrease? comments: 4. Does The Va Requirement To Use Of A Pla On A Construction Project Restrict Competition? yes/no comments: 5. Do You Expect Subcontractor Resistance Should Va Requires The Use Of A Pla On This Construction Solicitation? yes/no comments: 6. Do You Have Additional Comments Regarding The Use Of A Pla For This Project? yes/no comments: --- End Of Pla Questionnaire --- contractor Capability Statement Package: firms Interested In Submitting Their Capabilities For This Project Must Include The Following Information Compiled Into A Contractor Capability Statement Package: cover Letter/introduction That Includes Company Name, Address, System For Award Management Database At Https://www.sam.gov/portal/sam Sam.gov Unique Entity Id Numbers, Point Of Contact With Phone Number And E-mail Address. business Size Determination. State Your Firm S Socioeconomic Type And Business Size: Such As (service-disabled Small Business, Veteran Owned Small Business, Small Business, Woman Owned Small Business, Large Business, Etc.). if Identifying As A Service-disabled Veteran-owned Small Business (sdvosb) Firm (or Jv), Veteran Owned Small Business Firm (vosb) (or Jv), You Must Be Registered In The U.s. Small Business Administration Veterans Small Business Certification (vetcert) Database At: Https://veterans.certify.sba.gov. Provide Evidence Of Certification. bonding Capacity: provide A Letter From Your Surety, On Surety Letterhead That Affirms Your Company S Bonding Capacity To Furnish A Bid Bond, Payment Bond, And Performance Bond For A Project Between $50 - $100 Million. contractor Capability Statement Shall Include, But Not Be Limited, To The Following: corporate Experience: provide Projects In The Past Five (5) Years That Are Valued At Approximately $30m Or Greater In Construction Costs, And demonstrate Your Company S Experience Constructing Or Managing The Construction Of Projects That Match The Following Characteristics: a. Va/nca National Cemetery Projects. (if No National Cemetery Experiences Provide Projects Similar Such As Regional Parks, Multiple Sport-fields Complexes, Or Multi-phased Land Development Projects Larger Than 10 Acres). b. State/local/private Cemetery Projects. c. Projects Requiring The Construction Of Multiple Features Typical To A National Cemetery Such As Pre-cast, Placed Crypts; Columbaria Niches, Memorial Walls, Cast Or Natural Stone Columbarium Caps, Cast Or Natural Stone Veneers, Turf (sod) Placement And Maintenance, Tree And Shrub Placement And Maintenance, Irrigation Systems With Mainlines Exceeding 4-inch In Diameter, Irrigation Central Control Systems, Roadways, Wetlands/environmental Remediation Or Restoration. d. Building Construction, Building Remodel, Mass/fine Grading & Excavation, Site Utilities, Paving, New Golf Courses Or Expansions, Regional Parks, Multiple Sport-fields Complexes, Or Multi-phased Land Development Projects Larger Than 10 Acres. describe Your Experience With As Many Of The Elements Of Construction Identified, Below, As You Can: i. Mass/fine Grading & Excavation Site Utilities prefer To See Projects Involving Earth Work And Grading For Cemeteries, Parks, Or Site Development Projects Of At Least 10 Acres. ii. Site Utilities demonstrate Experience With Storm Water Management Systems And Site Drainage For Flat Sites. demonstrate Experience With Potable Water Distribution From A Well, Or Municipal Source. demonstrate Experience With Sanitary Waste Systems, Both Powts & Municipal. iii. Paving paving Projects May Include Private & Local Asphalt Roads; Concrete Curb & Gutter, Asphalt Parking Lots, And Concrete Sidewalk, On Site Development Projects Of At Least 10 Acres. experience In Missouri Or Similar Climates Is Preferred, But Not Required. iv. Landscaping landscaping Projects Involving Planting And Lawn Installation For Cemeteries, Parks, Golf Courses Or Other Site Development Projects Of At Least 10 Acres In Climates Similar To St. Louis, Missouri. v. Irrigation irrigation System Installation For Cemetery, Park, Golf Course, Or Other Types Of Development Sites Of At Least 10 Acres. Include Experience With Irrigation Ponds, Wells, Pumping Systems If You Have It. vi. Precast Concrete Burial Components demonstrate Experience With Successful Fabrication And Installation Of Precast Crypt And Precast Columbarium, If You Have It. vii. Phasing And Continuity Of Operations demonstrate Experience With Best Practices To Successfully Complete Phased Site Work At An Occupied And Functioning Facility In A Way To Minimize Noise And Dust And Minimize Detrimental Effects On Cemetery Operations. current Project List: provide A Detailed List Of Ongoing Contracts & Projects. The Description Shall Include: project Type award Amount award Date estimated Completion Date ---- End Of Contractor Capability Statement Package --- please Submit Your Comments To The Pla Questionnaire And The Contractor Capability Statement Package Via Email To Joshua Gibson, Contracting Officer, At Joshua.gibson2@va.gov, No Later Than 3:00 Pm Et On January 6, 2025, In The Subject Line State Jefferson Barracks National Cemetery, Phase 1a Expansion And [company Name]". Note That This Mailbox Will Only Accept E-mails Of 15mb In Size Or Smaller, So You May Break Your Submission Into Multiple Emails If Needed. All Information Concerning This Requirement, When It Proceeds To Solicitation, Will Be Posted Only On The Federal Business Opportunities Website (https://sam.gov). --- End Of Sources Sought Notice ---
Closing Soon6 Jan 2025
Tender AmountRefer Documents 

Turkish Electrical Communications A.S. General Directorate (TEIAS) 2nd Regional Directorate Tender

Electrical Goods and Equipments...+1Electrical and Electronics
Turkey
Purchaser Name: Turkish Electrical Communications A.S. General Directorate (TEIAS) 2nd Regional Directorate | Itm.16.19 Reference, 380 Kv Lapseki 3 – Sütlüce 3 – İzmit Gulf Passage Interface Centers Completion
Closing Date17 Jan 2025
Tender AmountRefer Documents 

HRISTO SMIRNENSKI PROFESSIONAL HIGH SCHOOL OF MECHANICAL AND ELECTRICAL ENGINEERING Tender

Civil And Construction...+1Civil Works Others
Bulgaria
Purchaser Name: HRISTO SMIRNENSKI PROFESSIONAL HIGH SCHOOL OF MECHANICAL AND ELECTRICAL ENGINEERING | "Delivery and Installation of Equipment for the Construction of a Stem Environment for the Needs of the Project "Hristo Smirnenski", Gr. Knezha", by Separate Positions"
Closing Soon9 Jan 2025
Tender AmountBGN 130.6 K (USD 68.5 K)

KONSTANTIN FOTINOV VOCATIONAL HIGH SCHOOL OF ELECTRICAL ENGINEERING AND ELECTRONICS Tender

Civil And Construction...+1Civil Works Others
Bulgaria
Purchaser Name: KONSTANTIN FOTINOV VOCATIONAL HIGH SCHOOL OF ELECTRICAL ENGINEERING AND ELECTRONICS | Selection of a SMR contractor for the establishment of a Stem Center in the building of the PGE "Konstantin Fotinov" According to Procedure Bg-rrp-1.015 - "school Stem Environment" According to the National Plan for the Recovery and Sustainability of the Republic of Bulgaria, financed by the European Union - Nextgenerationeu
Closing Soon7 Jan 2025
Tender AmountBGN 76.8 K (USD 40.3 K)
7241-7250 of 7777 active Tenders