Drone Tenders

Details: Description To Purchase The Aforementioned Technical And Scientific Equipment Used In Gathering Data And Other Matters Related To Pa Ccpl. 1 Lot 1 Dslr Camera Specification: Eos R6 Mark Ii Full Frame All Weather Mirrorless Camera With 24-105 F4 Lens + Mount Adaptor Ef-eos R 24.2 Mp Full Frame Cmos Sensor Digix X 40fps With Mechanical Shutter Uhd 4k 60p Internal Video High Resolution 3.69m - Dot 0.5 3,690,000 Dot Res External 6k Prores Raw Recording Dual Pixel Cmosaf Ii 2 Lot 2 High-grade Drone Including Adopter And Batteries Weight (with Propellers, Without Accessories) 915g Max Takeoff Weight 1,050g Dimensions Folded (without Propellers) : 221 X 96.3 X 90.3mm (lxwxh) Unfolded (without Propellers) : 347.5 X 283 X 107.7mm (lxwxh) Diagonal Distance 380.1mm Max Ascent Speed 6 M/s (normal Mode) 8 M/s (sport Mode) Max Descent Speed 6 M/s (normal Mode) 6 M/s (sport Mode) Max Flight Speed (at Sea Level, No Wind) 15 M/s (normal Mode) Forward : 21 M/s, Side 20 M/s, Backward : 19m/s (sport Mode) Max Wind Speed Resistance 12m/s Max Take-off Altitude Above Sea Level 6000 M (without Payload) Max Flight Time (no Wind) 45 Min Max Hover Time (no Wind) 38 Mins Max Flight Distance 32 Km Max Pitch Angle 30 (normal Mode) 35 Sport Mode Max Angular Velocity 200/s Gnss Gps + Galileo + Beidou + Glonass (glonass Is Supported Only When The Rtk Module Is Enabled ) Hovering Accurancy Vertical 0.1 M (with Vision System); 0.5 M (with Gnss); 0.1 M (with Rtk) Horizontal 0.3 M (with Vision System); 0.5 M (with High-precision Positioning System; 0.1 M (with Rtk) Operating Temperation Range 10 To 40 C (14 To 140 F) Internal Storage N/a Motor Model 2008 Propeller Model 9453f Propellers For Enterprise Beacon Built Into The Aircraft Wide Camera Sensor 3e : 4/3 Cmos, Effective Pixel : 20 Mp Lens Fov : 84 Format Equivalent : 24 Mm Aperture: F/2.8-f/11 Focus: 1 M To Iso Range 3e 100-6400 Shutter Speed Electronic Shutter : 8-1 / 8000 S Mechanical Shutter : 8-1 / 2000s Max Image Size 3e : 5280 X 3956 Still Photography Modes Single : 20 Mp Timed : 20 Mp Jpeg : 0.7/1/2/3/5/7/10/15/20/30/60s Smart Low-light Shooting: 20mp Panorama : 20mp (raw Image) Shooting 48 Mp Photo Does Not Support 2s Interval Smart Low-light Shooting: 12mp Video Resolution H.264 4k: 3840 X 2160 @ 30fps Fhd: 1920 X 1080 @ 30fps Bitrate 4k: 130 Mbps Fhd : 70 Mbps Supported File Format Exfat Photo Format Jpeg/dng (raw) Video Format Mp4 (mpeg-4 Avc/h.264) Tele Camera Sensor 1/2-inch Cmos, Effective Pixels : 12mp Lens Fov: 15 Format Equivalent : 162 Mm Aperture : F/4.4 Focus : 3m To Iso Range Dji Mavic 3e 100-6400 Shutter Speed Electronic Shutter : 8 - 1 / 8000 S Max Image Size 4000 X 3000 Photo Format Jpeg Video Format Mp4 (mpeg-4 Avc/h.264) Still Photography Modes Single : 12 Mp Timed : 12mp Jpeg: 07/1/2/3/5/7/10/15/20/30/60 Smart Low-light Shooting: 12mp Video Resolution H.264 4k : 3840 X 2160 @ 30fps Fhd : 1920 X 1080 @ 30fps Bitrate : 4k : 130 Mbps Fhd: 70 Mbps Digital Zoom: 8 X (56x Hybrid Zoom) Thermal Camera : Thermal Imager Uncooled Vo X Microbolometer Pixel Pitch 12um Frame Rate 30 Hz Lens: Dfov: 61 Format Equivalent : 40 Mm Aperture: F/1.0 Focus: 5m To Noise Equivalent Temperature Difference (netd) < 50 Mk@f1.0 Temperature Measurement Method Spot Meter, Area Measurement Temperature Measurement Range 20 To 150 C (-4 To 302 F, High Gain Mode) 0 To 500 C (32 To 932 F, Low Gain Mode) Palette White Hot/ Black Hot/tint/ironred/ Hot Iron Arctic/ Medical/ Fulgurite/ Rainbow1 / Rainbow 2 Photo Format Jpeg (8-bit) R-jpeg (16bit) Video Resolution 640 X 512 @ 30fps Bitrate 6 Mbps Video Format Mp4 (mpeg-4 Avc/h.264) Digital Zoom: 28x Infrared Wavelength 8-14 Um Infrared Temperature Measurement Accuracy 2 C Or 2% (using The Larger Value) Gimbal Stabilization 3- Axis (tilt, Roll, Pan) Mechanical Range Tilt - 135° To 100° Roll -45 ° To 45° Pan -27° To 27° Controllable Range Tilt - 90° To 35° Pan : Not Controllable Max Control Speed (tilt) 100°/s Angular Vibration Range _ 0.007° Sensing Type: Omnidirectional Binocular Vision System, Supplemented With An Infrared Sensor At The Bottom Of The Bottom Of The Aircarft. Forward : Measurement Range : 0.5 - 20m Detection Range: 0.5 - 200m Effective Sensing Speed : Flight Speed < 15 M/s Fov : Horizontal 90°, Vertical 103° Backward Measurement Range : 0.5 - 25 M Effective Sensing Speed : Flight Speed < 12 M/s Fov: Horizontal 90°, Vertical 103° Lateral Measurement Range: 0.2 - 10m Effective Sensing Speeding : Flight Speed <15 M/s Fov: Horizontal 90°, Vertical 85° Upward Measurement Range : 0.2 - 10m Effective Sensing Speed : Flight Speed < 6m/s Fov: Front And Back 100 °, Left And Right 90° Downward Measurement Range : 0.3 - 18m Effective Sensing Speed : Flight Speed < 6m/s Fov: Front And Back 130°, Left And Right 160° Operating Environment Forward, Backward, Lateral And Upward: Surface With A Clear Pattern And Adequate Lighting (lux > 15) Downward: Diffuse Reflective Surface With Diffuse Reflectivity > 20 % (e.g Walls, Trees, People And Adequete ;ighting (lux > 15) Sensing Video Transmission Video Transmission System Enterprise Transmission Live View Quality Remote Controller: 1080p/30fps Operating Frequency 2.400- 2.4835 Ghz 5.725-5.850ghz Max Transmission Distance (unobstructed, Free Of Interference) Fcc : 15km Ce: 8km Srrc : 8 Km Mic : 8km Max Transmission Distance (obstructed) Strong Interference (dense Building, Residential Areas, Etc. ) : 1.5 - 3km (fcc/ce/srrc/mic) Medium Interference (suburban Areas, City Parks, Etc.) : 3-9 Km (fcc), 3-6 Km (ce/srrc/mic) Low Interference (open Spaces, Remote Area, Etc. ) : 9-15 (fcc), 6-8 Km (ce/srrc/mic) Max Download Speed 15mb/s (with Rc Pro Enterprise) Latency (depending On Environmental Conditions And Mobile Device) Approx. 200ms Antenna 4 Antennas, 2 T4r Transmission Power (eirp) 2.4 Ghz: < 33 Dbm (fcc), <20dbm (ce/srrc/mic) 5.8 Ghz: <33 Dbm (fcc), <30dbm (srrc), <14dbm (ce) Video Transmission System Enterprise Transmission Max Transmission Distance (unobstructed, Free Of Interference) Fcc: 15 Km Ce / Srrc/ Mic : 8 Km Video Transmission Operating Frequency 2.400-2.4835 Ghz 5.725-5.850 Ghz Antenna 4 Antennas, 2 T4r Video Transmission Transmitter Power (eirp) 2.4 Ghz: < 33 Dbm (fcc), <20dbm (ce/srrc/mic) 5.8 Ghz: < 33 Dbm (fcc), <14dbm (ce), <23 Dbm (srrc) Wi-fi Protocol 802.11 A/b/g/n/ac/ax Support 2 X 2 Mimo Wi-fi Wi-fi Operating Frequency 2.400-2.4835 Ghz 5.150-5.250 Ghz 5.725- 5.850 Ghz Wi-fi Transmitter Power (eirp) 2.4 Ghz : <26 Dbm (fcc), <20 Dbm (ce/srrc/mic) 5.1 Ghz : <26 Dbm (fcc), <23 Dbm (ce/srrc/mic) 5.8 Ghz: < 26 Dbm (fcc/srrc), <14 Dbm (ce) Bluetooth Protocol Bluetooth 5.1 Bluetooth Operating Frequency 2.400-2.4835 Ghz Bluetooth Transmitter Power (eirp) <10 Dbm Screen Resolution 1920 X 1080 Screen Size 5.5 Inches Screen 60 Fps Brightness 1000 Nits Touchscreen Control 10 Point Multi-touch Batttery Li-ion (5000 Mah @ 7.2 V) Charging Type Recommended To Be Charged With The Included Usb-c Power Adapter (100w) Or Usb Charger At 12 V Or 15 V Rated Power 12 W Storage Capacity Internal Storage (rom) : 64gb Supports A Microsd Card For Expanded Capacity Supported Dji Aircraft Gnss Gps + Galileo + Glonass Dimensions Antenna Folded And Controller Stick Unmounted: 183.27 X 137.41 X 47.6mm (lxwxh) Antennas Unfolded And Controller Sticks Mounted: 183.27 X 203.35 X 59.84 (lxwxh) Weight Approx. 680g Model Rm510b Storage Supported Memory Cards Aircraft: U3 / Class 10/v30 Or Above Is Required. A List Of Recommended Microsd Cards Can Be Found Below Battery Capacity Standard Voltage 15.4 V Max Charging Voltage 17.6v Type Lipo 4s Chemical System Lico02 Energy 77 Wh Weight 335.5g Charging Temperature 5 ° To 40° C (41° To 410 °f) Charger Input Output Power Output Max. 100 W (total) When Both Ports Are Used, The Maximum Output Power Of Each Interface Is 82 W, And The Charger Will Dynamically Allocate The Output Power Of The Two Ports According To The Load Power. Charging Hub Input Usb-c: 5-20 V, 5.0 A Output Battery Port : 12-17.6 V, 8.0 A Rated Power 100 W Charging Type Three Batteries Charged In Sequence Charging Temperature Range 5° To 40° C (41° To 104 ° F) Rtk Module Dimension 50.2 X 40.2 X 66.2 Mm (lxwxh) Weight 24 + 2 G Interface Usb-c Approx. 1.2 W Rtk Positioning Accuracy Rtk Fix: Horizontal : 1 Cm + 1 Ppm; Vertical : 1.5 Cm + Ppm Please Be Guided Of The Following: * Must Have A Minimum Of One (1) Year Warranty Certificate On Parts And Service * With Local Service Center In Cebu City Or Cebu Province

Details: Usgs Telecommunications Tower Inspections In Hawaii County, Hawaiiinstruction To Vendorsa Firm-fixed Priced Quotation And Technical Quotation Package Usgs Telecommunications Towers Inspections In Hawaii County, Hawaii Shall Be Submitted By 3:00 Pm Est, Friday, April 12, 2024 [extended From Original 3:00 Pm Est, Friday, April 5, 2024], To The Contracting Officer, Pauline Fukunaga, At Fukunaga@usgs.gov. Faxed Or Mailed Quotations Will Not Be Accepted. Vendor Shall Supply The Usgs With A Thorough Quotation Package Demonstrating How They Meet All Requirements Within The Evaluation Criteria. Quotation Package Shall Be Thorough Enough To Allow The Usgs To Perform A Proper Evaluation. The Following Additional Information Must Be Supplied Along With Your Quotation. Failure To Submit This Information May Deem Your Quotation Non-responsive And Your Quotation May Not Be Considered. 1) Vendor Must Submit A Quotation Which Will Be Reviewed By The Contracting Officer And Usgs Technical Liaison. The Quotation Must Reflect All The Technical Specifications As Attached In The Request For Quote (rfq). 2) Federal Tax Id Number 3) Business Size Classification. 4) Uei Number. Must Be Actively Registered In Sam.govthe Award Resulting From This Rfq Will Be Based On Lowest Price Technically Acceptable (lpta) Quote. Preference Will Be Given To Small Business.all Questions Regarding This Rfq Shall Be Sent To The Contract Specialist Via Email No Later Than 3:00 Pm Est, Thursday, April 4, 2024. Vendors Are Urged To Select One (1) Representative From Their Firm To Present All Questions. Phone Calls And Late Questions Will Not Be Accepted. (end Of Instructions)requirements/salient Characteristics Required Specs For Usgs Telecommunications Towers Inspections In Hawaii County, Hawaiitechnical Specifications For Usgs Telecommunications Tower Inspections In Hawaii County, Hawaii:us Geological Survey (usgs) Needs To Perform Tower Inspections At Two (2) Antenna Sites/towers Located On The Island Of Hawaii And To Report On The Condition Of The Towers Regarding Compliance With Applicable Safety Regulations And To Identify Deficiencies With Meeting Ansi/tia 22-g Standards For Tower Functionality, Structural Integrity, Electrical/grounding Compliance, And Safety Requirements. Final Report To Include Evaluation Of Current Wind Loading Levels.statement Of Work (sow) ¿ Us Geological Survey Telecommunications Towers Inspections In Hawaii County, Hawaii1.0 general1.1 scope. The Contractor Shall Provide All Labor, Equipment, Materials, Supplies, And Services, Except Those Identified As Government Furnished In Paragraph 2.0, Necessary To Provide A Full Inspection Of Two (2) Us Geological Survey (usgs) Antenna Tower Sites Located In Hawaii County, Hawaii. The Results Of The Inspection Will Include A Report On The Basic Site And Tower Conditions, Identify Deficiencies, And Detail Compliance With Ansi/tia/eia 222-g Standards For Tower Functionality, Structural Integrity, And Safety Requirements.1.2 period Of Performance: The Contractor Shall Complete The Inspection Work Within 30 Days Of Contract Award And Shall Complete The Final Report Within 60 Days Of Contract Award.1.3 place And Performance Of Services: The Work Shall Be Performed At Two (2) Usgs Antenna Tower Sites Located In Hawaii County, Hawaii. Specific Locations Are Identified In Exhibit 1, Tower Site Locations.1.4 contractor Travel. All Travel Expenses, Including Transportation, Visa And Working Permits, Lodging And Meals Are The Responsibility Of The Contractor.2.0 Government Furnished Property, Materials, And Equipment (gfp/m/e/s)the Government Will Provide The Property, Material, Equipment, And/or Services Listed Below Solely For The Purpose Of Performance Under This Contract: None3.0 Contractor Furnished Property, Materials, And Equipment (cfp/m/e)except For Those Items Specifically Stated To Be Government-furnished In Paragraph 2.0, The Contractor Shall Furnish Everything To Perform The Services Indicated In Paragraph 1.1.4.0 Requirementsthe Contractor Shall:¿ perform Inspections Of Two (2) Usgs Antenna Towers Identified In Exhibit 1, Tower Site Locations.¿ inspect The Following Items, At A Minimum:o tower And Base. If Possible, Identify Manufacturer And Model Of Each Tower.o establish/confirm Tower Meta-data Of Actual Height And Gps Location.o correctly Categorize Per Tower Tia 222-g ¿structure Classification¿, ¿exposure Category¿, And ¿topographic Category¿o report When Available Per Tia 222-g Annex B. Per Tower And Appropriate County.o maximum Basic Wind Speed Load Without Ice.o maximum Considered Earthquake Spectral Response Acceleration.o verify Structural Guys Integrity And Bonding (where Applicable).o climbing Ladders.o climbing Safety Cable And Other Height Safety Facilities.o all Platforms.o verify/check Ground Bus Bar. Proper Grounding/bonding Per Tower Leg.o cables/cable Clampso condition Of Paint/ Tower Member Corrosion/ Antenna Corrosion.o site Structures/area/fencing5.0 Inspection Process And Access Coordination5.1 Scheduling. The Contractor Shall Coordinate With The Usgs Hawaiian Volcano Observatory, Kevan Kamibayashi (kevank@usgs.gov), 808-937-7702, Hilo, Hawaii, On The Itinerary And Gaining Access To The Antenna Sites Facilities For The Inspections. 5.2 Site Access. The Contractor Shall Provide Their Own High Clearance Four-wheel Drive Vehicle To Access The Antenna Sites. If A Site Cannot Be Accessed With A High Clearance Four-wheel Drive Vehicle, The Usgs Will Provide The Necessary Transportation To The Site.5.3 Physical Inspection. The Contractor Shall Climb All Usgs Antenna Towers From Base To Top And Use Digital Cameras To Record All Non-compliant Items/areas On Each Antenna Tower And Surrounding Site Area, Including Corrosions On The Structural Guys.at A Minimum, The Contractor Shall Inspect The Items Listed In Paragraph 4.0 The Government Will Consider Drones As An Alternative To Using Certified Tower Climbers If The Inspections Can Be Accomplished With The Same Level Of Detail As A Physical Inspection. Note: A Drone Cannot Be Used Within The National Park. 5.4 Field Testing And Measuring.¿ in Addition To Field Observations, The Contractor Shall Take Measurements To Determine Structural Integrity With The Standards/regulations Listed In This Sow. ¿ the Contractor Shall Provide All Necessary Equipment And Meters To Safely Make The Observations And Take The Field Measurements In Accordance With Recognized Standards. The Contractor Shall Record All Results And Observations. ¿ the Measurements Or Observations To Be Taken In The Field Include, But Are Not Limited To: O structural Integrity. The Contractor Shall Take Necessary Observations And Measurements To Determine If The Tower Is Structurally Sound. This May Include Digital Radiography Methods To Detect Corrosion Hidden By Tower Coatings. O tower Condition. The Contractor Shall Record All Comments On Tower Condition The Result From A Visual Review Of The Tower Structure.6.0 Deliverables. Final Report.¿ the Contractor Shall Provide Individual Analysis For The Two (2) Antenna Tower Sites Listed In Exhibit 1.¿ the Contractor Shall Record Measurement Readings And Enter Them In The Inspection Summary.¿ the Contractor Shall Prepare Findings For Deficiencies Or Hazards Identified By The Measurements.¿ the Contractor Shall Provide Certified Maximum And As-inspected Wind Load Calculations For Each Tower.¿ provide An Engineering Letter Stamped By A Professional Engineer, With Recommendations Regarding The Adequacy Of The Towers For The Existing Loads.¿ the Contractor Shall Deliver To The Usgs Site Poc Two (2) Usb Flash Drives With All Recorded Photos In Jpeg Format When Inspection Is Complete. Copies Of All Images Or Videos Shall Be Provided With The Inspection Reports.¿ the Tower Analysis Shall Be Delivered To Usgs Hawaiian Volcano Observatory Poc: Kevan Kamibayashi: Kevank@usgs.gov (808-937-7702), In A Digital Pdf Format And Original Printed Format Delivered To:kevan Kamibayashi1266 Kamehameha Avenuesuite A-8hilo, Hi 96720 7.0 Special Considerations:7.1 The Contractor Shall Coordinate Scheduling For Site Visits And Inspections Through The Usgs Site Poc. 7.2 The Contractor Shall Coordinate All Inspection Activities With The Usgs Site Poc. 7.3 The Contractor Shall Supply All Riggers, Digital Cameras, Safety Climbing And Personal Protective Equipment (ppe), Tools And Materials. 7.4 The Contractor Shall Comply With U.s. Occupational Safety And Health Administration (osha) Construction Safety Requirements, Including Fall Protection Requirements Of Osha 1926.501. ¿ the Contractor Is Responsible For Safely Climbing Antenna Towers With Proper Fall Protection, And For The Safety Of Its Employees, Ppe, Tools, And Materials. ¿ the Contractor Shall Always Use Double Lanyard To Climb And Work On Antenna Towers For Fall Protection. Use Of Single Lanyard Is Not Permitted. 100% Tie¿off And Fall Protection Shall Be Used Whenever Climbing And Working On Any Antenna Towers, Without Exception.¿ the Contractor Shall Coordinate With The Usgs Site Poc For Scheduling Of Invasive Pest Inspection With The National Park Service When Visiting The Uwe Bluff Site. ¿ the Government Anticipates That The Inspections Should Take No More Than One (1) Day Per Site. The Contractor Will Have Latitude To Schedule Inspection Dates And Times. All Inspections Are Completed Within 30 Days After Award.¿ the Contractor Shall Coordinate The Inspection Schedule With The Usgs Site Poc To Ensure Escorts To The Sites Are Available. A Repeat Visit Can Be Coordinated With The Usgs Site Poc If Necessary, Within The 30 Day Contract Performance Window.exhibit 1 Tower Site Locations: site latitude longitude site Address Location usgs Site Poc1 uwe Bluff 19.420560 -155.288001 see Latitude & Longitude kevan Kamibayashiusgs808-937-7702kevank@usgs.gov2 south Point 18.979334 -155.667824 see Latitude & Longitude kevan Kamibayashiusgs808-937-7702kevank@usgs.gov1 The Radio Station Locations Do Not Have Street Addresses; The Listed Latitude And Longitude And Contacting The Usgs Site Poc Is The Best Way To Obtain Access To Each Site Listed. 2 Contact The Usgs Radio Site Point Of Contact/owner To Coordinate And Obtain Access To Each Site (end Of Requirements)electronic Invoicing And Payment Requirements - Invoice Processing Platform (ipp) Apr 2013under This Contract, The Following Documents Are Required To Be Submitted As An Attachment To The Ipp Invoice:¿ see Far 52.212-4 (g) For Required Documentation To Be Submitted.¿ please Provide A Hardcopy Of The Invoice Referencing The Order Number (block 3 Of Your Optional Form 347), With Dates Of Service Or Date Goods Shipped. Scanned .pdf Or .doc Are Acceptable.¿ for Payment Issue Or Status Email: Pms@usgs.gov After 30 Days Of Proper Submission Of An Invoice.the Contractor Must Use The Ipp Website To Register, Access And Use Ipp For Submitting Requests For Payment. The Contractor Government Business Point Of Contact (as Listed In Sam) Will Receive Enrollment Instructions Via Email From The Federal Reserve Bank Of Boston (frbb) Prior To The Contract Award Date, But No More Than 3 - 5 Business Days Of The Contract Award Date. Contractor Assistance With Enrollment Can Be Obtained By Contacting The Ipp Production Helpdesk Via Email Ippgroup@bos.frb.org Or Phone (866) 973-3131.if The Contractor Is Unable To Comply With The Requirement To Use Ipp For Submitting Invoices For Payment, The Contractor Must Submit A Waiver Request In Writing To The Contracting Officer With Its Proposal Or Quotation.52.900s-1006 Prevention Of Malicious Code march 2005(a) Definitions: Malicious Code Is A Computer Code Developed For The Purpose Of Causing Some Form Of Intentional Damage Tocomputer Systems Or Networks. Malicious Code May Be A Complete Program Or Code Imbedded In Software Programs That Appearto Provide Useful Functions. The Term Includes Computer Viruses And Other Destructive Programs, Such As "trojan Horses" Andnetwork "worms."(b) The Contractor Must Have In Place An Anti-virus Procedure To Ensure That Media Supplied Is Uncontaminated By Malicious Code.(c) The Contractor Is Required To Scan All Delivered Software To Insure It Is Free Of Malicious Code Prior To Its Installation Oroperation On Usgs-owned Computers Or Contractor-owned Computers Connected To Usgs Computer Systems Or Networks.contractors Using Diagnostics Software Disks Or Connecting To A Non-usgs Computer While Performing Repairs Or Upgrades To Ausgs Computer Will Scan The Serviced Computer's Drive(s) To Insure They Are Free Of Malicious Code Upon Completion Of Theservice Call, Or Prior To Return Of Serviced Equipment, If Servicing Is Performed Off-site.52.223-15 Energy Efficiency In Energy-consuming Products December 2007 (a) Definition. As Used In This Clause--¿energy-efficient Product¿¿(1) Means A Product That¿(i) Meets Department Of Energy And Environmental Protection Agency Criteria For Use Of The Energy Star Trademark Label; Or(ii) Is In The Upper 25 Percent Of Efficiency For All Similar Products As Designated By The Department Of Energy¿s Federal Energy Management Program.(2) The Term ¿product¿ Does Not Include Any Energy-consuming Product Or System Designed Or Procured For Combat Or Combat-related Missions (42 U.s.c. 8259b).(b) The Contractor Shall Ensure That Energy-consuming Products Are Energy Efficient Products (i.e., Energy Star® Products Or Femp-designated Products) At The Time Of Contract Award, For Products That Are¿(1) Delivered;(2) Acquired By The Contractor For Use In Performing Services At A Federally-controlled Facility;(3) Furnished By The Contractor For Use By The Government; Or(4) Specified In The Design Of A Building Or Work, Or Incorporated During Its Construction, Renovation, Or Maintenance.(c) The Requirements Of Paragraph (b) Apply To The Contractor (including Any Subcontractor) Unless¿(1) The Energy-consuming Product Is Not Listed In The Energy Star® Program Or Femp; Or(2) Otherwise Approved In Writing By The Contracting Officer.(d) Information About These Products Is Available For¿(1) Energy Star® At Http://www.energystar.gov/products; And(2) Femp At Http://www1.eere.energy.gov/femp/procurement/eep_requirements.html. gs0330 section 508 Applicable Standards february 2011the Resources Acquired In This Investment Must Meet All Applicable Standards Established By The Access Board In 36 Cfr Part 1194, Including Technical, Functional Performance, Information, Documentation, And Support Standards. The Products, Services, Information And Data That Are Provided To The Government Or The Public As A Result Of This Acquisition Shall Afford Individuals With Disabilities Accessibility Comparable To That Afforded To Individuals Without Disabilities. Standards Applicable To This Acquisition Include: ___ Software Applications And Operating Systems 1194.21 ___ Web-based Intranet And Internet Information And Applications 1194.22 ___ Telecommunications Products 1194.23 ___ Video Or Multimedia Products 1194.24 ___ Self-contained, Closed Products 1194.25 ___ Desktop And Portable Computers 1194.26 _x_ Functional Performance Criteria 1194.31 _x_ Information, Documentation, And Support 1194.41the Full Text Of The Above Referenced Standards Can Be Found At: Http://www.section508.gov/index.cfm?fuseaction=stdsdoc.internet Protocol Version 6 june 2012(a) Any System Hardware, Software, Firmware And/or Networked Component (voice, Video Or Data) Developed, Procured, Or Acquired In Support And/or Performance Of This Contract Shall Be Capable Of Transmitting, Receiving, Processing, Forwarding And Storing Digital Information Across System Boundaries Utilizing System Packets That Are Formatted In Accordance With Commercial Standards Of Internet Protocol (ip) Version 6 (ipv6) As Set Forth In The Usgv6 Profile (nist Special Publication 500-267) And Corresponding Declarations Of Conformance Defined In The Usgv6 Test Program. In Addition, This System Shall Maintain Interoperability With Ipv4 Systems And Provide At Least The Same Level Of Performance And Reliability Capabilities Of Ipv4 Products.(b) Specifically, Any New Ip Product Or System Developed, Acquired, Or Produced Must:(1) Interoperate With Both Lpv6 And Ipv4 Systems And Products, And(2) Have Available Contractor/vendor Ipv6 Technical Support For Development And Implementation And Fielded Product Management.(c) As Ipv6 Evolves, The Contractor Commits To Upgrading Or Providing An Appropriate Migration Path For Each Item Developed, Delivered Or Utilized At No Additional Cost To ·the Government. The Contractor Shall Retrofit All Non-ipv6 Capable Equipment, As Defined Above, That Is Fielded Under This Contract With Ipv6 Capable Equipment, At No Additional Cost To The Government.(d) The Contractor Shall Provide Technical Support For Both Ipv4 And Ipv6.(e) Any System Or Software Must Be Able To Operate On Networks Supporting Ipv4, Ipv6 Or One That Supports Both.(f) Any Product Whose Non-compliance Is Discovered And Made Known To The Contractor Within One Year After Acceptance Shall Be Upgraded, Modified Or Replaced To Bring It Into Compliance At No Additional Cost To The Government.usgs Unilateral Deobligations may 2013beginning May 2013, Contracting Officers May Deobligate Unexpended Balances With A Unilateral Administrative Modification When All Of The Following Apply ¿(a) The Following Clause Is Included In The Award, Either Initially Or Subsequently By Bilateral Modification: The Contractor Shall Submit All Invoices Under The Award No Later Than 90 Calendar Days After The Period Of Performance Has Expired, Unless A Request For Extension Has Been Submitted To The Contracting Officer. After120 Days Has Passed Since The Expiration Of The Performance Period, The Government Reserves The Right To Issue A Unilateral Modification Deobligating Any Unexpended Funds, And To Initiate Closeout Procedures.(b) The Contracting Officer Has Contacted The Cognizant Program Official To Confirm That All Work Is Complete And Deliverables Received And Accepted(c) The Contracting Officer Has Determined That The Vendor Has Invoiced And Been Paid All Amounts Due Under The Award.(d) All Additional Closeout Procedures Will Be Initiated As Appropriate.52.232-40 Providing Accelerated Payment To Small Business Subcontractors Dec 2013 (a) Upon Receipt Of Accelerated Payments From The Government, The Contractor Shall Make Accelerated Payments To Its Small Business Subcontractors Under This Contract, To The Maximum Extent Practicable And Prior To When Such Payment Is Otherwise Required Under The Applicable Contract Or Subcontract, After Receipt Of A Proper Invoice And All Other Required Documentation From The Small Business Subcontractor. (b) The Acceleration Of Payments Under This Clause Does Not Provide Any New Rights Under The Prompt Payment Act. (c) Include The Substance Of This Clause, Including This Paragraph (c), In All Subcontracts With Small Business Concerns, Including Subcontracts With Small Business Concerns For The Acquisition Of Commercial Items.gs0339 green Acquisition february 2014the Usgs Is Committed To Promoting The Natural Environment And Protecting The Health And Well-being Of People. In The Performance Of Work Under This Contract, The Contractor Shall Exert Its Best Efforts To Provide Services In A Manner That Will Promote The Natural Environment And Protect Health And Well-being. Green Purchasing Or Environmentally Preferable Contracting Included The Initiatives Described Below: Alternative Fuels And Vehicles Are Described At Http://www.afdc.energy.gov/afdc/ Biobased Products Are Described At Http://www.biopreferred.gov/ Energy Efficient Products Are Described At Http://energystar.gov/products For Energy Star Products And At Http://www.eere.energy.gov/femp/procurement For Femp Designated Products. Environmentally Preferable Computers Are Described At Http://www.epeat.net Non-ozone Depleting Products Are Described At Http://www.epa.gov/ozone/snap/index.html Recycled Products Are Described At Http://epa.gov/cpg Water Efficient Products Are Described At Http://epa.gov/watersense/technical Liaison ¿ Technical Direction october 1997a) The Performance Required Herein Shall Be Subject To The Technical Direction Of The Technical Liaison (tl) As Identified Below. As Used Herein, "technical Direction" Is Defined As Direction To The Contractor That Fills In Details, Suggests Possible Lines Of Approach, Or Otherwise Supplements The Scope Of The Work Set Forth Herein And Shall Not Constitute A New Assignment, And Does Not Supersede Or Modify Any Article Or Clause Of This Contract. (b) The Technical Liaison Is Not Authorized To Perform, Formally Or Informally, Any Of The Following Actions: (1) Promise, Award, Agree To Award, Or Execute Any Contract, Contract Modification, Or Notice Of Intent That Changes Or May Change This Contract; (2) Waive Or Agree To Modification Of The Delivery Schedule; (3) Make Any Final Decision On Any Contract Matter Subject To The Disputes Clause; (4) Terminate, For Any Reason, The Contractor's Right To Proceed; (5) Obligate In Any Way, The Payment Of Money By The Government. Only A Warranted Contracting Officer Is Authorized To Obligate Funds On This Or Any Other Contract Action.(c) The Contractor Shall Immediately Notify The Contracting Officer In Writing If The Technical Liaison Has Taken An Action (or Fails To Take Action) Or Issues Direction (written Or Oral) That The Contractor Considers To Exceed The Above Limitations.(d) The Technical Liaison Assigned For This Contract Is: tba

Details: Description I Rental Of Led Wall, Sound System, Lights And Sounds A. Day 1 - Sept. 17, 2024 (tuesday) Event: Thanksgiving Mass (municipal Activity Area) Lot Basic Sound System 1 Sets Mitus215a Main Speaker 2 Sets Powered Sub-speakers 2 Set 12 Channel Mixing Console 1 Set Dj Controller With Laptop Stand 1 Sets Wireless Microphones 4 Set Laptop 1 Sets Lots Of Cables And Wires 5 Sets Lots Of Mic Stands And Accessorries 4 Event: Carnival Fair (general Paciano Park) Lot Basic Sound System 1 Sets Mitus215a Main Speaker 2 Sets Powered Sub-speakers 2 Set 12 Channel Mixing Console 1 Set Dj Controller With Laptop Stand 1 Sets Wireless Microphones 4 Set Laptop 1 Sets Lots Of Cables And Wires 5 Sets Lots Of Mic Stands And Accessorries 4 Event: Lb Awards And Barangay Night (centtro Mall) Lot Lights And Sound System 1 Sets Hdl20a Line Array Main Speakers 12 Sets Floor Monitor 6 Sets Powered Sub-speakers 8 Set 32 Channel Digital Mixing Console 1 Set Digital Snake 1 Set Dj Controller 1 Sets Wireless Microphones 6 Sets Wired Microphones 8 Set Laptop 1 Sets Lots Of Cables And Wires 8 Sets Lots Of Mic Stands And Accessorries 6 Sets Beam 260 Moving Heads 16 Sets 3watts Led Par (rgbw) 40 Sets 3watts Led Par (amber And White) 24 Sets Smoke Machine 2 Sets Led Follow Spot 2 Lot Led Wall Set-up 1 Set P3 2.5m X 4m Screen Led Wall Set And Patch Cables 1 Set Video Mixer 1 Sets Sender Box 2 Sets Stage Riser 4 Set Laptop (video Player) 1 Set Audio Mixer 1 B Day 2 - Sept. 18, 2024 (wednesday) Event: Carnival Fair (general Paciano Park) Lot Basic Sound System 1 Sets Mitus215a Main Speaker 2 Sets Powered Sub-speakers 2 Set 12 Channel Mixing Console 1 Set Dj Controller With Laptop Stand 1 Sets Wireless Microphones 4 Set Laptop 1 Sets Lots Of Cables And Wires 5 Sets Lots Of Mic Stands And Accessorries 4 Event: Miracles Of Makiling And Makiling Photography Display (phsa) Lot Basic Sound System 1 Sets Mitus215a Main Speaker 2 Sets Powered Sub-speakers 2 Set 12 Channel Mixing Console 1 Set Dj Controller With Laptop Stand 1 Sets Wireless Microphones 4 Set Laptop 1 Sets Lots Of Cables And Wires 5 Sets Lots Of Mic Stands And Accessories 4 Subtotal C Day 3 - Sept. 19, 2024 (thursday) Event: Zumbaños And Bailamos (evacuation Center) Lot Lights And Sound System 1 Sets Hdl20a Line Array Main Speakers 12 Sets Floor Monitor 6 Sets Powered Sub-speakers 8 Set 32 Channel Digital Mixing Console 1 Set Digital Snake 1 Set Dj Controller 1 Sets Wireless Microphones 6 Sets Wired Microphones 8 Set Laptop 1 Sets Lots Of Cables And Wires 8 Sets Lots Of Mic Stands And Accessories 6 Sets Beam 260 Moving Heads 16 Sets 3watts Led Par (rgbw) 40 Sets 3watts Led Par (amber And White) 24 Sets Smoke Machine 2 Sets Led Follow Spot 2 Lot Led Wall Set-up 1 Set P3 2.5m X 4m Screen Led Wall Set And Patch Cables 1 Set Video Mixer 1 Sets Sender Box 2 Sets Stage Riser 4 Set Laptop (video Player) 1 Set Audio Mixer 1 Lot Bubble Machine 1 High Output Bubble Machine Event: Flower And Fruit Planting (kubo Library) Lot Basic Sound System 1 Sets Mitus215a Main Speaker 2 Sets Powered Sub-speakers 2 Set 12 Channel Mixing Console 1 Set Dj Controller With Laptop Stand 1 Sets Wireless Microphones 4 Set Laptop 1 Sets Lots Of Cables And Wires 5 Sets Lots Of Mic Stands And Accessorries 4 Event: Carnival Fair (general Paciano Park) Lot Basic Sound System 1 Sets Mitus215a Main Speaker 2 Sets Powered Sub-speakers 2 Set 12 Channel Mixing Console 1 Set Dj Controller With Laptop Stand 1 Sets Wireless Microphones 4 Set Laptop 1 Sets Lots Of Cables And Wires 5 Sets Lots Of Mic Stands And Accessorries 4 D Day 4 - Sept. 20, 2024 (friday) Event: Carnival Fair And Bañamos Aquagames (general Paciano Park) Lot Basic Sound System 1 Sets Mitus215a Main Speaker 2 Sets Powered Sub-speakers 2 Set 12 Channel Mixing Console 1 Set Dj Controller With Laptop Stand 1 Sets Wireless Microphones 4 Set Laptop 1 Sets Lots Of Cables And Wires 5 Sets Lots Of Mic Stands And Accessorries 4 Event: Mr. And Ms. Bagong Los Baños (evacuation Center) Lot Lights And Sound System 1 Sets Hdl20a Line Array Main Speakers 12 Sets Floor Monitor 6 Sets Powered Sub-speakers 8 Set 32 Channel Digital Mixing Console 1 Set Digital Snake 1 Set Dj Controller 1 Sets Wireless Microphones 6 Sets Wired Microphones 8 Set Laptop 1 Sets Lots Of Cables And Wires 8 Sets Lots Of Mic Stands And Accessorries 6 Sets Beam 260 Moving Heads 16 Sets 3watts Led Par (rgbw) 40 Sets 3watts Led Par (amber And White) 24 Sets Smoke Machine 2 Sets Led Follow Spot 2 Lot Led Wall Set-up 1 Sets P3 2.5m X 4m Screen Led Wall Set And Patch Cables 3 Sets Video Mixer 3 Sets Sender Box 6 Sets Stage Riser 12 Sets Laptop (video Player) 3 Sets Audio Mixer 3 Lot Stage (extension And Judges Platform) 1 Non Slip Aluminum Stage With Stairs Subtotal E Day 5 - Sept. 21, 2024 (saturday) Event: Civic Shower Parade (trace College) Lot Basic Sound System 1 Sets Mitus215a Main Speaker 2 Sets Powered Sub-speakers 2 Set 12 Channel Mixing Console 1 Set Dj Controller With Laptop Stand 1 Sets Wireless Microphones 4 Set Laptop 1 Sets Lots Of Cables And Wires 5 Sets Lots Of Mic Stands And Accessorries 4 Event: Carnival Fair (general Paciano Park) Lot Basic Sound System 1 Sets Mitus215a Main Speaker 2 Sets Powered Sub-speakers 2 Set 12 Channel Mixing Console 1 Set Dj Controller With Laptop Stand 1 Sets Wireless Microphones 4 Set Laptop 1 Sets Lots Of Cables And Wires 5 Sets Lots Of Mic Stands And Accessorries 4 Event: Hot Air Balloon Fiesta And Drone Light Show (uplb Freedom Park) Lot Basic Sound System 1 Sets Mitus215a Main Speaker 2 Sets Powered Sub-speakers 2 Set 12 Channel Mixing Console 1 Set Dj Controller With Laptop Stand 1 Sets Wireless Microphones 4 Set Laptop 1 Sets Lots Of Cables And Wires 5 Sets Lots Of Mic Stands And Accessorries 4 Event: Bayle Sa Kalye (lopez Ave To Uplb Freedom Park) Lot Basic Sound System For Stations 5 Sets Mitus215a Main Speaker 2 Sets Powered Sub-speakers 2 Set 12 Channel Mixing Console 1 Set Dj Controller With Laptop Stand 1 Sets Wireless Microphones 4 Set Laptop 1 Sets Lots Of Cables And Wires 5 Sets Lots Of Mic Stands And Accessorries 4 Lot Lights And Sound System 1 Sets Hdl20a Line Array Main Speakers 12 Sets Floor Monitor 6 Sets Powered Sub-speakers 8 Set 32 Channel Digital Mixing Console 1 Set Digital Snake 1 Set Dj Controller 1 Sets Wireless Microphones 6 Sets Wired Microphones 8 Set Laptop 1 Sets Lots Of Cables And Wires 8 Sets Lots Of Mic Stands And Accessorries 6 Sets Beam 260 Moving Heads 16 Sets 3watts Led Par (rgbw) 40 Sets 3watts Led Par (amber And White) 24 Sets Smoke Machine 2 Sets Led Follow Spot 2 Lot Led Wall Set-up 1 Set P3 2.5m X 4m Screen Led Wall Set And Patch Cables 1 Set Video Mixer 1 Sets Sender Box 2 Sets Stage Riser 4 Set Laptop (video Player) 1 Set Audio Mixer 1 Lot Stage (judges Platform) 1 16ft X 24ft X 3ft Non Slip Aluminum Stage Subtotal Day 6 - Sept. 22, 2024 (sunday) Event: Color Run And Padyak Lb (trace College) Lot Basic Sound System 1 Sets Mitus215a Main Speaker 2 Sets Powered Sub-speakers 2 Set 12 Channel Mixing Console 1 Set Dj Controller With Laptop Stand 1 Sets Wireless Microphones 4 Set Laptop 1 Sets Lots Of Cables And Wires 5 Sets Lots Of Mic Stands And Accessorries 4 Event: Carnival Fair (general Paciano Park) Lot Basic Sound System 1 Sets Mitus215a Main Speaker 2 Sets Powered Sub-speakers 2 Set 12 Channel Mixing Console 1 Set Dj Controller With Laptop Stand 1 Sets Wireless Microphones 4 Set Laptop 1 Sets Lots Of Cables And Wires 5 Sets Lots Of Mic Stands And Accessorries 4 Event: Grand Revelry (general Paciano Park) Lot Lights And Sound System With Band Setup 1 Sets Hdl20a Line Array Main Speakers 12 Sets Floor Monitor 6 Sets Powered Sub-speakers 8 Set 32 Channel Digital Mixing Console 1 Set Digital Snake 1 Set Dj Controller 1 Sets Wireless Microphones 6 Sets Wired Microphones 8 Set Laptop 1 Sets Lots Of Cables And Wires 8 Sets Lots Of Mic Stands And Accessorries 6 Sets Beam 260 Moving Heads 16 Sets 3watts Led Par (rgbw) 40 Sets 3watts Led Par (amber And White) 24 Sets Smoke Machine 2 Sets Led Follow Spot 2 Set Pearl Vbl Vision Birch 5piece Shell Pack 1 Set Twin Reverb Guitar Amplifier 1 Sets Dual 12 Guitar Amplifier 2 Set 4x10 Bass Amplifier 1 Set Set Of Drum Microphone 1 Lot Led Wall Set-up 1 Sets P3 2.5m X 4m Screen Led Wall Set And Patch Cables 3 Sets Video Mixer 3 Sets Sender Box 6 Sets Stage Riser 12 Sets Laptop (video Player) 3 Sets Audio Mixer 3 Subtotal Subtotal Of Item I Rental Of Chairs And Tables Pcs Chairs Rental 2,000 Pcs September 17, 2024 (tuesday) 500 Pcs September 19, 2024 (thursday) 500 Pcs September 20, 2024 (friday) 500 Pcs September 21, 2024 (saturday) 500 Pcs Tables With Floor Length (10 Pax) Rental 30 Pcs September 17, 2024 (tuesday) 30 Subtotal Of Item Ii Rental Of Tents Units 2mx2m Tent Rental (p250/day For 6days) 80 Units 6mx12m Tent Rental (p10,000 For 6days) 2 Subtotal Of Item Iii

Details: Description 1. The Local Government Unit Of Bislig City, Through The Supplemental Budget No 1 2024 Intends To Apply The Sum Of Eight Hundred Ninety-five Thousand Four Hundred Eighty Pesos Only (ᵽ 895,480.00) Being The Abc To Payments Under The Contract For Pbd 032-2024 (goods). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Local Government Unit Of Bislig City, Through The Supplemental Budget No 1 [intends To Apply The Sum Of Eight Hundred Ninety-five Thousand Four Hundred Eighty Pesos Only (ᵽ 895,480.00) Being The Abc To Payments Under The Contract For Each Lot/item. Bids Received In Excess Of The Abc For Each Lot Shall Be Automatically Rejected At Bid Opening. 2. The Local Government Unit Of Bislig City Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Thirty (30) Calendar Days Upon Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From The Bac Secretariat And Inspect The Bidding Documents At The Address Given Below During Office Hours From Monday To Friday At 8:00 Am – 5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On September 16, 2024 From The Given Address And Website(s) Below Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of One Thousand Pesos Only (p 1,000.00) The Procuring Entity Shall Allow The Bidder To Deposit At The City Government Of Bislig Lbp Account 2162-1017-68 And Present Its Proof Of Payment For The Fees In Person Or Through Electronic Means. The Bidding Documents May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Local Government Unit Of Bislig City Will Hold A Pre-bid Conference On September 24, 2024, 9:30 Am At Conference Room, Engineering Office, City Hall, Bislig City, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, On Or Before October 08, 2024, 9:30 Am, Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On October 08, 2024, 9:30 Am At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Local Government Unit Of Bislig City Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Anti Virus Software, Good For 3 Users, Windows Compatible, 3 Years 3 Un 1,350.00 4,050.00 Antivirus Security, 5 Users, Min. Of 1 Year License 2 Pk 3,500.00 7,000.00 Audio Cord, 3.5mm Jack Male To 2 Rca Male (5 Meters) Heavy Duty 1 Pc 1,000.00 1,000.00 Avr, 220v 5 Un 350.00 1,750.00 Solid State Drive (ssd), 2.5", Sata 6 Gb/s, 500 Gb 4 Un 5,000.00 20,000.00 Computer Monitor Screen Size: 54.6cm (21.5") Screen Mode: Full Hd Aspect Ratio: 16:9 Backlight Technology: Led Maximum Resolution: 1920 X 1080 Interfaces / Ports: Dvi/vga 1 Un 10,000.00 10,000.00 Ddr4, Ram Memory, 16gb, 3600mhz 1 Pc 3,000.00 3,000.00 Printer, 4 Color Ink Jet Technology, All In One Printer Specifications: * Printing Resolution: 4800 X 1200 Dpi Or Higher * Copying - 20 Copies Or More * Flatbed Color Image Scanner * Scanning Optical Resolution: 1200 Dpi Or Higher * Borderless Printing * Usb Interface * At Least 1 Yr. Warranty 1 Un 9,500.00 9,500.00 External Hard Drive, 1tb With Case 1 Un 4,500.00 4,500.00 Flash Drive, Usb, 32 Gb, 3.0 9 Pc 400.00 3,600.00 Flash Drive, Usb, 64gb-3.0 8 Pc 500.00 4,000.00 Ink Cartridge, For Canon Pixma Pg 830, Black (genuine) 5 Cart 1,700.00 8,500.00 Ink Refill, Genuine Ink Bottle For Epson 003, Black, 65ml 335 Btl 400.00 134,000.00 Ink Refill, Genuine Ink Bottle For Epson 003, Cyan, 65ml 118 Btl 400.00 47,200.00 Ink Refill, Genuine Ink Bottle For Epson 003, Magenta, 65ml 116 Btl 400.00 46,400.00 Ink Refill, Genuine Ink Bottle For Epson 003, Yellow, 65ml 116 Btl 400.00 46,400.00 Ink Refill, Genuine For Epson L15150, Black, 127ml 15 Btl 500.00 7,500.00 Ink Refill, Genuine For Epson L15150, Cyan, 70ml 3 Btl 400.00 1,200.00 Ink Refill, Genuine For Epson L15150, Magenta, 70ml 3 Btl 400.00 1,200.00 Ink Refill, Genuine For Epson L15150, Yellow, 70ml 3 Btl 400.00 1,200.00 Ink Refill, Genuine, T 6641, Black, 70ml 224 Btl 400.00 89,600.00 Ink Refill, Genuine, T 6642, Cyan, 70ml 65 Btl 400.00 26,000.00 Ink Refill, Genuine, T 6643, Magenta, 70ml 65 Btl 400.00 26,000.00 Ink Refill, Genuine, T 6644, Yellow, 70ml 65 Btl 400.00 26,000.00 Ink, Epson, 008 L15180, L15150, L15160, L6580, L6550, L6460, L6490, Black 3 Btl 1,000.00 3,000.00 Ink, Copy Printer, Dx 2430 (gestetner) 500ml 5 Bx 1,200.00 6,000.00 Ink, Refill, 664, 4-colour, Original, 70ml, 4's/pk 1 Pk 980.00 980.00 Ink, Refill, Epson L1800, T673, Black, 70ml 29 Btl 700.00 20,300.00 Ink, Refill, Epson L1800, T673, Cyan, 70ml 12 Btl 700.00 8,400.00 Ink, Refill, Epson L1800, T673, Light Cyan, 70ml 12 Btl 700.00 8,400.00 Ink, Refill, Epson L1800, T673, Light Magenta, 70ml 12 Btl 700.00 8,400.00 Ink, Refill, Epson L1800, T673, Magenta, 70ml 12 Btl 700.00 8,400.00 Ink, Refill, Epson L1800, T673, Yellow, 70ml 12 Btl 700.00 8,400.00 Keyboard & Mouse, Combo, Usb Type, Wired 9 Un 1,000.00 9,000.00 Keyboard, Computer, Usb Type, Wired 9 Pc 400.00 3,600.00 Micro Sd Card (small) For Drone Camera, 300mb/s, Sdxc V60,u3,class 10 1 Pc 2,000.00 2,000.00 Mouse Pad, Wrist Support Gel 11 Pc 100.00 1,100.00 Mouse, Usb Connection Type, Optical, 400 Dpi Resolution 11 Pc 500.00 5,500.00 Plotter Printer Ink, Epson Ultrachrome Xd2 Black Ink 80ml For Surecolor T3130n 2 Cart 4,560.00 9,120.00 Plotter Printer Ink, Epson Ultrachrome Xd2 Cyan Ink 50ml For Surecolor T3130n 1 Cart 4,560.00 4,560.00 Plotter Printer Ink, Epson Ultrachrome Xd2 Magenta Ink 50ml For Surecolor T3130n 1 Cart 4,560.00 4,560.00 Plotter Printer Ink, Epson Ultrachrome Xd2 Yellow Ink 50ml For Surecolor T3130n 1 Cart 4,560.00 4,560.00 Power Supply, Atx, 700w, Computer 1 Un 2,000.00 2,000.00 Printer, Multi-function Specification: - Print, Scan And Copy Functions; - Scanner Type: Flatbed Colour Image Scanner; - Print Speeds Of Up To 33 Ppm; - Max Copy Size: A4; - Max Copy Resolution: 300 X 300 Dpi Or Higher; - High Page Yields Of Up To 4,500 (black) And 7,500 (colour); - Ink Jet Printing Technology With Continuous Ink Tank System, 4-colour; - With At Least 1 Year Warranty On Parts & Services 6 Un 12,000.00 72,000.00 Printer Waste Pad Replacement 10 Pc 250.00 2,500.00 Printer, Multi-function Specification: - Print, Scan And Copy Functions; - Scanner Type: Flatbed Colour Image Scanner; - Print Speeds Of Up To 33 Ppm; - Max Copy Size: A4; - Max Copy Resolution: 600 X 600 Dpi Or Higher; - High Page Yields Of Up To 4,500 (black) And 7,500 (colour); - Ink Jet Printing Technology With Continuous Ink Tank System, 4-colour; - With At Least 1 Year Warranty On Parts & Services 4 Un 15,000.00 60,000.00 Router - 802.11ac Dual-band Wireless, Up To 700 Mbps Or Higher 1 Un 4,800.00 4,800.00 Router, 5 Ports Gigabit Ethernet, Dual Core, 256mb Ram (min.) Usb, Capable Of All The Advanced Configuration, Up To 1,200 Mbps Or Higher 1 Un 7,500.00 7,500.00 Sd Card For Dslr(big)specs: 300mb/s,sd Xc V60,u3 Class 10 ,capacity:128gb-256gb) 1 Pc 3,000.00 3,000.00 Ssd, Internal, Sata, 512 Gb 1 Pc 4,500.00 4,500.00 System Unit Only, Clone W/o Licensed Operating System Specifications: Processor: No. Of Cores - 6; No. Of Threads - 12; Base Freq. - 2.90 Ghz; Max. Turbo Freq. - 4.30 Ghz; Cache -12 Mb, Memory: At Least 8 Gb Ddr4 Dual Slot ?storage: At Least 1 Tb Hdd Sata + 240 Gb Ssd Connectivity: Gigabit Ethernet; Wifi Dongle, Interfaces/ports: Hdmi, Usb Ports, Card Reader (1), Audio Jack (2) Graphics: At Least 2 Gb Vcard, Operating System: Pre-installed Windows 10 Or Higher Version, Wired Mouse & Keyboard; Webcam, Ups: 650 Va With Separate Avr: 500 Watts Or Higher, Warranty 1year Warranty On Parts And Services 1 Un 30,000.00 30,000.00 Universal Ink, 1 L, Black 1 Btl 1,000.00 1,000.00 Universal Ink, 1 L, Cyan 2 Btl 1,000.00 2,000.00 Universal Ink, 1 L, Magenta 1 Btl 1,000.00 1,000.00 Ups, 650va, 360 Watts, 4 Sockets 14 Un 4,000.00 56,000.00 Usb Hub, 7 Ports, 480 Mbps (min.) On/off Switch 5 Pc 300.00 1,500.00 Usb, Wifi Adapter, Dual Band Nano Wireless 4 Pc 450.00 1,800.00 Note: Awarding By Lot But Quotation Not To Exceed Line-item Abc

Details: Description Request For Quotation Doc Control No. : Form-as-pd-002 Revision No: 0 Effectivity Date : 1 September 2023 The Department Of Human Settlements And Urban Development (dhsud) Would Like To Invite Your Company To Submit A Quotation Or Proposal For The Following Procurement Activity: Request For Quotation No. Rfq No. 2024-07-021 Procurement Activity Procurement Of Ict Equipment Mode Of Procurement Small Value Procurement Approved Budget For The Contract (abc) Nine Hundred Eighteen Thousand Two Hundred Fifteen Pesos Only (php 918,215.00), Inclusive Of All Existing And Appropriate Government Taxes And Charges. Deadline For The Receipt Of Quotations Or Bid Proposal On Or Before July 10, 2024 , 10:00 Am. Delivery Schedule Delivery Of Goods/items Shall Be Fifteen Days Working Days Upon Receipt Of The Approved Purchase Order. The Minimum Technical Specifications For The Items Are As Follows: Item No. Qty. Unit Item, Description, & Minimum Specifications 1 10 Pcs 3 In 1 Printer Print, Scan, Copy Compact Integrated Tank Design High Yield Ink Bottles Borderless Printing Up To 4r 2 2 Pcs A3 Printer W/ Scanner Prints Up To A3+ (for Simplex) Automatic Duplex Printing Ultra-high Page Yield Of 7,500 Pages (black) And 6,000 Pages (colour) Wi-fi, Wi-fi Direct "epson Connect (epson Iprint, Epson Email Print And Remote Print Driver, Scan To Cloud)" 3 2 Pcs Projector 3,300-lumen Projector 3lcd Technology For Equal White & Colour Light Output Native Xga Resolution And 4:3 Performance Long Lamp Life Up To 12,000 Hours In Eco Mode Easy Setup And Positioning Flexibility Hdmi Connectivity Meki Projector Screen 70x70 Wall Mount 4 5 Pcs Drone Aircraft Takeoff Weight: < 249 G Folded (without Propellers): 148×94×64 Mm (l×w×h) Unfolded (with Propellers): 298×373×101 Mm (l×w×h) Camera Image Sensor: 1/1.3-inch Cmos, Effective Pixels: 48 Mp Max Image Size: 8064×6048 "sensing Type: Omnidirectional Binocular Vision System, Supplemented With A 3d Infrared Sensor At The Bottom Of The Aircraft" 5 3 Pcs Voice Recorder Built-in Memory-4gb Battery Type (provided)- Built-in Lithium Battery Built-in Microphone Maximun Files Per Folder-199 Recording Format- Linear Pcm/mp3 Usb Connection Charging Playback Format - Lpcm/mp3/aac/wma 6 10 Pcs Headset Microphone Type: Bi-directional Input Impedance: 32 Ohm Sensitivity (headphone): 94 Dbv/pa +/- 3 Db Sensitivity (microphone): -17 Dbv/pa +/- 4 Db Frequency Response (headset): 20 Hz - 20 Khz Frequency Response (microphone): 100 Hz - 10 Khz Height: 171 Mm, Width: 151 Mm, Depth: 68 Mm, Weight: 0.197 Kg,, Cable Length: 1.9 M 7 1 Pcs Portable Hard Drive "1tb, Extreme Portable Ssd, Usb 3.2, Read Upto 1050mb/s, Write Upto 1000mb" 8 8 Pcs Laptops Intel® Core™ I7-1165g7 (4c / 8t, 2.8 / 4.7ghz, 12m "8gb Soldered Ddr4-3200 / One Memory Soldered To Systemboard, One Ddr4 So_x0002_dimm Slot, Dual-channel Capable" 512gb Ssd M.2 2280 Pcie® 3.0x4 Nvme® 14" Fhd (1920x1080) Ips 300nits Anti-glare Windows® 11 Home Single Language, English Ms Office Pro 9 1 Pcs Camera 18-megapixel Aps-c-size Cmos Sensor & Digic 4+ Image Processor 9-point Af With 1 Centre Cross-type Af Point Standard Iso 100 - 6400 (expandable To 12800) Wi-fi Supported Terms And Conditions: 1. Payment Shall Be Made Upon Completion Of Service/delivery And Submission Of The Supporting Documents (e.g., Delivery Receipt, Sales Invoice, Billing Statement, Warranty Certificate If Applicable, And Other Documents As May Be Required In The Technical Specifications); 2. Kindly Accomplish The Attached Reply Slip Correctly And Accurately. Please Do Not Alter The Contents Of The Form In Any Way; 3. All Technical Specifications Are Mandatory. Failure To Comply With Any Of The Said Requirements Shall Be A Cause For The Disqualification Of Your Quotation; 4. The Department Shall Have The Right To Inspect The Goods To Check Its Conformity With The Required Minimum Technical Specifications; 5. Issuance Of Official Receipts (or) Or Sales Invoice (si) In The Name Of The Department Of Human Settlements And Urban Development (dhsud) Is Mandatory. The Supplier Shall Bear The Cost Of Mailing The Ors Or Sis. The Supplier Shall Be Responsible For Bearing Any Bank Charges And/or Service Charges That May Be Incurred By The Department In Case Of Payment Requests Via Check Deposit. 6. Please Submit The Latest Copy Or E-copy Of The Following Documentary Requirements: A. Philgeps Registration Number / Certificate Of Philgeps Membership; B. 2023 Mayor’s Permit/business Permit; (note: In Case The Permit Has Recently Expired, Please Submit The Old Permit And Attach The Official Receipt For The Renewal Application Thereof.) C. Signed Omnibus Sworn Statement (oss); Note: A Notarized Omnibus Sworn Statement (oss) Shall Be Submitted By The Lcrb Or Scrb Prior To The Processing Of Payment. If The Authorized Representative Listed On The Reply Slip Is Not The Same Person Who Executed The Omnibus Sworn Statement (oss) Kindly Attach A Copy Of The Notarized Special Power Of Attorney (spa) Together With The Valid Government-issued Identification Card Of Both Signatories. D. Supporting Documents (as May Be Applicable): For Sole Proprietorships – Dti Business Name Registration; For Partnerships Or Corporations - A Notarized Special Power Of Attorney, Or A Notarized Secretary’s Certificate, Whichever Is Applicable (bidders With Previously Submitted Eligibility Requirements, Provided They Are Current And Updated, Are No Longer Required To Submit The Said Documents.) Your Quotation Or Bid Proposal Must Be Submitted Together With The Attached Reply Slip And The Above Mentioned Documentary Requirements Through Personal Delivery, And In A Sealed Envelope, To The General Service Section At The Dhsud Region 4a Office Located In Dencris Business Center, Brgy. Halang Calamba City, Or Through Electronic Mail At Celia.miraflor@dhsud.gov.ph Or Karen.bayno@dhsud.gov.ph The Dhsud Bids And Awards Committee (bac), Through The Concerned End-user Unit And The Bac Secretariat, Shall Recommend The Award Of The Contract To The Head Of The End-user Unit Or Implementing Office, Of The Service Provider With The Single/lowest Calculated And Responsive Quotation (scrq/lcrq) Pursuant To Section 53.10 Of The 2016 Revised Irr Of Ra 9184. With The End View Of Obtaining The Contract Most Advantageous To The Government Pursuant To Sec. 41 Of The 2016 Revised Irr Of Ra 9184, Dhsud Reserves The Right To Reject Any And All Quotations/bids, To Annul The Procurement Process, To Declare A Failure Of Bidding, To Reject All Quotations/bids At Any Time Prior To Contract Award, Or Not To Award The Contract, Without Thereby Incurring Any Liability To The Affected Bidder/s. For Questions And/or Clarifications, Please Contact The Procurement Division At Telephone Number 8424-4080 (local 1833). Engr. Rodrigo M. Elpedes Jr Supervising Admin Officer/oic-admin And Finance Reply Slip Procurement: Request For Quotation No.: _______________ Date Engr. Rodrigo M. Elpedes Jr Supervising Admin Officer/oic-admin And Finance Department Of Human Settlements And Urban Development-4a Dencris Business Center, National Highway, Halang Calamba City, Province Of Laguna Dear Engr. Elepedes: This Is To Submit The Following Bid Quotation/proposal For The Subject Procurement With A Total Bid Price Of __________________________________ Pesos (php________.00), Inclusive Of All Existing And Appropriate Government Taxes And Charges: Quantity Unit Description I Hereby Certify That The Above Bid Quotation/proposal Is True And Correct, And I Accept The Rights Of The Department Of Human Settlements And Urban Development, As The Procuring Entity, Under Section 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Thank You. Truly Yours, Name Of Company: ____________________________________________ Name Of Authorized Representative: _______________________________ Designation/position: ____________________________________________ Address: _____________________________________________________ Telephone No./mobile No.: _______________________________________ Email Address: ________________________________________________ Philgeps Registration No. : ______________________________________ Landbank Account No.: _________________________________________ If With Ada, Kindly Indicate The Landbank Account Name And Account Number; If None, Please Indicate To Whom Checks Should Be Made Payable To : _____________________________________ Tin: __________________________ Vat-registered: Vat󠄀 ( ) Non-vat ( ) Signature: ___________________________________________________ Omnibus Sworn Statement (revised) [shall Be Submitted With The Bid] [kindly Fill Out This Template Accordingly By Completing The Needed Information And Deleting The Non-applicable Provisions That May Be Deleted.] _________________________________________________________________________ Republic Of The Philippines ) City/municipality Of ______ ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. [select One, Delete The Other:] [if A Sole Proprietorship:] I Am The Sole Proprietor Or Authorized Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; 2. [select One, Delete The Other:] [if A Sole Proprietorship:] As The Owner And Sole Proprietor, Or Authorized Representative Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached Duly Notarized Special Power Of Attorney; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g., Duly Notarized Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney, Whichever Is Applicable;)]; 3. [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. [name Of Bidder] Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. [select One, Delete The Rest:] [if A Sole Proprietorship:] The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Partnership Or Cooperative:] None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Corporation Or Joint Venture:] None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. [name Of Bidder] Complies With Existing Labor Laws And Standards; And 8. [name Of Bidder] Is Aware Of And Has Undertaken The Responsibilities As A Bidder In Compliance With The Philippine Bidding Documents, Which Includes: A. Carefully Examining All Of The Bidding Documents; B. Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C. Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D. Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The [name Of The Project]. 9. [name Of Bidder] Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code. In Witness Whereof, I Have Hereunto Set My Hand This __ Day Of ___, 20__ At ____________, Philippines. [insert Name Of Bidder Or Its Authorized Representative] [insert Signatory’s Legal Capacity] Affiant [jurat] [format Shall Be Based On The Latest Rules On Notarial Practice]

Details: It is about the procurement of cleaning services for buildings or premises used by the university located in Turku. The buildings are located in Kupitta, Ruissalo, Hämeenkatu and Itäharju. In Kupitta, the buildings named Medisiina Ac, Dentalia and Teutori are located, where the Faculty of Medicine of the University of Turku operates as the largest unit. ","facilities are mainly used for offices, teaching and laboratories. In addition, there are medical offices and procedure rooms, restaurant rooms, a library and technical rooms. In the greenhouse building there are customer rooms, office-laboratory and teaching rooms, in the maintenance building again social and maintenance rooms. ","The Drone Hall Used by the Faculty of Technology is located on Tierkankatu on Itäharju, and the hall space also has office and storage facilities. ","business space The office is located at Hämeenkatu 9 and serves as a co-working space for students, researchers and staff.","","general description of the procurement is attached 1. The premises will be presented in more detail at the presentation event. Participation in the presentation is mandatory","","

Details: Introduction: the U.s. Army Contracting Command - Orlando (acc-orlando) Is Issuing This Sources Sought Notice (ssn) On Behalf Of The Army National Guard’s (arng) Readiness Center, Exportable Combat Training Capability (xctc). Acc- Orlando Is Seeking To Identify Sources Capable Of Providing Professional Services In The Form Of Exercise Control, Instrumentation Support, Battlefield Effect (bfe)/ Immersion (bfi) Support, And Equipment And Staff Support To The Arng’s Xctc Program. The Contractor Shall Provide: program Management exercise Control instrumentation And Communication property Management battlefield Immersion battlefield Effects emergent Threat Integration the Result Of This Market Research Will Contribute To Determining The Method Of Procurement, If A Requirement Materializes. Based On The Responses To This Sources Sought Notice/market Research, This Requirement May Be Set-aside For Small Businesses (in Full Or In Part) Or Procured Through Full And Open Competition. Multiple Awards May Be Made. All Small Business Set-aside Categories Will Be Considered. Telephone Inquiries Will Not Be Accepted Or Acknowledged, And No Feedback Or Evaluations Will Be Provided To Companies Regarding Submissions. disclaimer: This Sources Sought Is For Informational Purposes Only. This Is Not A Request For Proposal (rfp) To Be Submitted. It Does Not Constitute A Solicitation And Shall Not Be Construed As A Commitment By The Government. Responses In Any Form Are Not Offers And The Government Is Under No Obligation To Award A Contract As A Result Of This Announcement. No Funds Are Available To Pay For Preparation Of Responses To This Announcement. Any Information Submitted By Respondents To This Technical Description Is Strictly Voluntary. program Background: the Mission Of The Xctc Program Is To Support And Enable Arng Brigade Combat Teams (bct) To Culminate Home Station Training Strategy In An Integrated Force-on-force Training Event As They Prepare For Future Readiness-building Events Or Operational Deployment. The Scope Of The Arng's Xctc Program Involves Training Up To Five Bcts At Multiple Locations Within A Training Year And Can Require Two Brigades (bde) To Train Simultaneously Within The Same Timeframe. The Rotation Is A 21-day Multi-echelon Exercise With A Bct, To Include Sourced Enablers (as Necessary And Approved), Focused On Achieving Brigade Training Level 3 (t3) Proficiency With Practiced Command Posts And Staffs. Rotations Are Typically Conducted Regionally In An Instrumented Decisive Action Training Environment (date) To Replicate Large Scale Combat Operations (lsco). these Exercises Evaluate Everything From Operational And Tactical To Leadership Skills And The Effectiveness Of Communication Systems In A Contested Environment. Bcts Are Expected To Execute Reception Staging Onward Movement, Integration (rsoi), Platoon Situational Tactical Exercises (stx), Platoon Live Fire Exercises (lfx), Brigade And Battalion Command Post Exercise (cpx), Platoon And Company Field Training Exercise (ftx) With Mission Command At Echelon, Reverse Reception Staging Onward Movement, And Integration (rrsoi). The Program Is Centered Around Five Lines Of Effort: Rotational Design, Operational Environment, Instrumentation, Training Aids, Devices, Simulators, And Simulations (itadss), Operational Readiness, And Resources. The Contractor Should Have A General Understanding Of Training Locations, Infantry, Stryker, And Armored Brigade Combat Team Readiness, Academics, Cpx, Ftx, Lfx, Oc/t, Rsoi/rrsoi, Government Furnished Property, Event Life Cycle Events, Visual Modified Vehicles, Instrumentation, Multiple Integrated Laser Engagement System (miles), Opposing Force (opfor) Integration, Exercise Reporting, Readiness Partner Integration, Rotational Training Unit Selection, Enablers, Commodities, Exercise Capabilities, Distinguished Visitors, And Senior Trainer Role. 1. Program Management. Provide The Army National Guard Collective Training (arng-trc) Branch With A High Level Of Organization, Strategic Planning, And Support Of The Xctc Program Manager. The Ability To Orchestrate Numerous Teams, Resources, And Logistics While Adhering To A Strict Timeline Necessitates A Systematic Approach. Establish Clear Objectives, Delineate Roles And Responsibilities, And Create Comprehensive Workflows To Ensure A Seamless Operation Throughout The Event Life Cycle. Effective Communication And Availability To The Xctc Program Manager Is The Core Of Managing Such Exercises, As It Is Essential To Synchronize The Efforts Of Cross-functional Teams And External Stakeholders. Risk Management Strategies Must Be Identified And Mitigated For Potential Issues Before They Escalate. Additionally, Data-driven Analysis Is Critical To Decision-making And Continuous Process Improvements To Adapt To Changing Circumstances And Optimize Performance. Tools And Technologies Must Be Established To Track Progress In Real-time, Ensuring Tasks Are Executed On Time To Complete Projects And Objectives Successfully. 2. Exercise Control. Provide A Centralized Control System With Dedicated Teams For Orchestrating Scenarios, Real-time Adjustments, And Oversight Of All Exercise Objectives. These Teams Must Oversee The Exercises Through The Event Life Cycles, Incorporate Rotational And Scenario Designs Planned To Challenge The Bct, And Ensure Safety And Compliance With Rules Of Engagement Throughout The Xctc Rotation. Must Be Able To Balance Structure And Flexibility, Allowing The Bct To React To Live, Virtual, Constructive Integrating Architecture Using Threats And Make Decisions That Align With The Training Objectives. Additionally, Teams Must Be Able To Monitor The Progress Of The Bct And Provide Feedback. After-action Reviews (aars) Through Instrumentation And Green Book Aars Are An Integral Part, Where Performance Is Evaluated, Lessons Are Learned, And Insights Are Documented For Continuous Improvement In Future Training Rotations. Teams Must Be Able To Validate Capabilities And Readiness But Also Enhance Operational Cohesion And Decision-making Skills In A Contested Environment. 3. Instrumentation And Communication. Provide Options, Tools, And Systems Designed To Monitor, Record, And Evaluate The Performance Of The Bct In Real Time. This Technology Infrastructure Is Vital For Capturing Up To 5,000 Personnel And Equipment Data, Allowing For Accurate After-action Reviews And Facilitating The Overall Training Objectives. This System Must Be Able To Show Formations From The Individual Level Through Division Formations. Additionally, This System Must Include Laser Engagement Systems That Simulate Battle Conditions, Global Positioning System (gps) Tracking For Personnel And Vehicles For Movement Analysis, And Communication Interception For Command-and-control Exercises.additionally, Drones And Cameras Provide Aerial Or First-person Perspectives, While Sensors Relay Information On Environmental Conditions And Specific Event Triggers. Virtual Simulations Are Integrated To Replicate Complex Scenarios Impractical Or Too Dangerous To Stage In Reality. These Tools Must Generate Data, Which Is Then Processed Through Advanced Software Platforms To Provide Feedback On Tactics, Operations, Strategy, And Unit Coordination. This Instrumentation Aims To Create An Immersive And Authentic Training Environment That Prepares The Bct For Various Operational Variables While Ensuring Safety And Learning Outcomes. 4. Property Management. Provide An Adequate Staff Support System Composed Of Dedicated Teams Working Behind The Scenes To Ensure Seamless Execution And Optimal Training Outcomes. It Is Pivotal To Orchestrate The Accountability, Supply, And Movement Of Government-furnished Property. This Team Must Be Able To Focus On Tasks Related To Exercise Preparation, Exercise Support Team Infrastructure, Exercise Support Equipment Emplacement, And Transportation Back To The Maintenance Facility. This Support Also Requires Coordination With The Training Facility, Training Units, Xctc Program Office, Exercise Control, And Other Supporting Activities To Ensure The Training Units Receive Maximum Benefits By Minimizing External Logistics And Environmental Support. Provide Comprehensive Logistics And Field Operations Support For All Government-furnished Property. The Contractor Shall Maintain The Appropriate Spares For All Instrumentation And Infrastructure Components. This Team Must Be Able To Correct Known Deficiencies Or Implement Recommended Enhancements To The Government-furnished Property As Appropriate. This Team Must Provide Continuous Corrective And Preventative Maintenance, Both At The Depot Level And Onsite At Xctc Field Training Sites. 5. Battlefield Immersion. Teams Must Test The Bct In An Environment That Closely Mirrors The Complexity And Intensity Of Large-scale Combat Operations. Teams Must Integrate A Range Of Mental And Physical Multisensory Experiences And Scenarios That Challenge The Bct. Teams Must Consider Using Virtual Technologies To Expose And Test The Bct To The Unpredictable Forces Of Force-on-force. Live, Virtual, And Constructive Forces Must Be Employed To Simulate Enemy Tactics, Forcing The Bct To Adapt To Dynamic Threats. Teams Will Incorporate Visual Modification (vismod) Platforms, Drones, Displaced Civilians, And Other Variables To Stress The Bct During Rotations. 6. Battlefield Effects. Simulate Realistic Battlefield Effects Within The Rotation To Create An Immersive Effect On The Bct In A Contested Training Environment. These Effects Must Mimic The Sights, Sounds, And Smells Experienced During Actual Combat, Psychologically Conditioning, And Preparing The Bct For Future Exercises Or Mobilizations. Teams Should Consider Using Controlled Pyrotechnics And Explosives To Replicate Ordinance Detonations, Smoke Machines, Or Fog Generators To Recreate Obscured Visibility And Sound Systems That Project The Cacophony Of Gunfire, Explosions, And Vehicle Movements. Additionally, Special Effects Must Be Considered Through Makeup And Moulage Applied To Actors Or Trainees To Simulate Injuries, Adding Realism And Urgency To Medical Response During The Rotation. These Effects Must Be Coordinated With The Exercise Control Team To Support Varying Tactical Scenarios, Emphasizing Realism While Maintaining Safe Training Parameters. 7. Emergent Threat Integration. Integrate Emergent Threats To Prepare The Bct For The Dynamic Environment. These Evolving Threats, From Cyber Warfare And Unmanned Systems To Hybrid Warfare Tactics And Information Operations, Require A Multidimensional Approach To Live, Virtual, And Scenario Planning. acquisition Strategy - Planning Information: 1. Contract Vehicle: The Determination Of Contract Vehicle And Small Business Set Aside Or Full And Open Competition Will Not Be Established Until Market Research Has Been Completed And The Acquisition Strategy Has Been Approved. 2. North American Industry Classification System (naics): The Applicable Naics Code For This Requirement Is 541990 (all Other Professional, Scientific, And Technical Services), With A Small Business Size Standard Of $19.5m[d1]. The Applicable Product Service Code (psc) Is U013 (education/training—combat). *note 01: The Current Sba Table Of Small Business Size Standards Was Updated 17 March 2023; Since The Beginning Of 2022, The Sba Has Regularly Updated The Table To Account For Inflation. Businesses Must Update Their Sam.gov Profiles In Order To Have Their Small Business Status Reflect The Most Current Small Business Size Standards. Until Updated, The Sam Profiles Will Continue To Display The Small Business Status Under Outdated Size Standards. *note 02: In Accordance With 13 C.f.r. 121.104, The Current Calculation For Dollar (monetary) Value Based Naics Codes Is Average Total Receipts Over The Last Five (5) Completed Fiscal Years *note 03: In Accordance With 13 C.f.r. 121.106, The Current Calculation For Employee Based Naics Codes Is Average Number Of Employees Used For Each Pay Period For The Preceding Completed 24 Calendar Months. 3. Contract Type: The Determination Of Contract Type Will Not Be Established Until Market Research Has Been Completed And The Acquisition Strategy Has Been Approved. submission Details: all Capability Statements Sent In Response To This Announcement Must Be Submitted Electronically (via Email) To The Contract Specialist No Later Than No Later Than 4:00 P.m. (est) On February 26, 2024 And Reference Sam Notice Number And Title In The Subject Line Of The E-mail And On All Enclosed Documents. primary Point Of Contact: Leatrice Frederick email: Leatrice.j.frederick.civ@army.mil secondary Point Of Contact: Jessica Wasser email: Jessica.l.wasser.civ@army.mil (cc) To The Technical Point Of Contract (tpoc) Via Email, Capt. Cindy Llantoy Cindy.m.llantoymosquera.mil@army.mil responses Shall Include Documentation Of Technical Expertise And Capability In Sufficient Detail For The Government To Determine That Your Company Possesses The Necessary Functional Area Expertise And Experience To Compete For This Acquisition. Additionally, Respondents Shall Include Information On Current Customers Using Their System. Customer Information Shall Consist Of The Customer/agency Name, Address, Point Of Contact Name And Phone Number, And Number Of Users And Locations Fielded For That Customer. It Is Imperative That Business Concerns Responding To This Announcement Articulate Their Capabilities Clearly And Adequately; If Not Capable Of Performing Individual Tasks Or Aspects Of The Functions Described, Describe The Specific Elements Of The Proposed Requirement That Would Prevent Or Limit Your Capability To Perform. written Responses To This Sources Sought Notice Should Consist Of The Following: 1. Can You Provide A Detailed Overview Of Your Experience In Designing And Facilitating Large-scale Collective Exercises For Military Organizations? 2. What Is Your Approach To Creating Realistic And Challenging Scenarios That Accurately Simulate Force On Force In Contested Operational Environments? 3. How Do You Ensure The Safety And Well-being Of Participants During The High-intensity And Complex Nature Of These Exercises? 4. Could You Describe How Your Exercises Incorporate The Latest Military Tactics, Techniques, And Procedures To Provide Up-to-date Training For Military Personnel? 5. What Measures Do You Take To Assess And Provide Feedback On The Effectiveness Of The Training And The Performance Of The Participants During These Exercises? 6. Provide Examples On How You Tailor Your Exercises To Accommodate The Varying Skill Levels And Roles Of Organizations That Will Be Participating? 7. Describe In What Ways You Have Integrated Technology, Such As Simulations And Virtual Reality, Into Your Training Exercises To Enhance The Learning Experience? 8. Outline The Logistics And Planning Process You Follow To Manage And Execute Large-scale Exercises, Including Coordination With Other Organizations, Installations, And Facilities? 9. Describe Your Experience With The Management And Accountability Of Government Furnished Property? 10. How Does Your Team Scale And Adapt Your Exercises To Meet The Evolving Needs And Size Of The Organizations Involved? 11. Provide Examples Or Case Studies Where Your Company’s Exercises Have Led To Tangible Improvements In The Organization’s Readiness And Capabilities? 12. Only Email Submissions Will Be Accepted. 13. Use Current Microsoft Office Compatible Software (.xlsx, .docx, Or .pptx) Or Adobe Acrobat 9 Pro (.pdf) Formats Or Later. 14. Classified Material Will Not Be Accepted. 15. Material Samples Will Not Be Accepted. 16. Information Papers May Be Submitted In A White Paper Format And Will Count Towards The Total Number Of Pages Allowed. 17. The Cover Sheet Shall Include The Following Company Information: Name, Address, Url, Poc Name And Email Address, Commercial Government Entity (cage) Code Number, Data Universal Numbering System (duns) Number, Business Type And Size, And A Statement If Your Firm Is Or Is Not Foreign-owned, Foreign-controlled, Or Has Foreign Influence. 18. Limit Responses To 15 Pages Of Technical Content, Including Graphs/charts Or Pictures. The Cover Sheet And Two Pages Of General Corporate Information, Including Past Performance And Key Personnel, Are Separate From The Page Limit. 19. The Minimum Acceptable Font Size Is 12 Arial. 20. All Documents Should Be Typed In Single-spaced, Single-sided Pages, With At Least One (1) Inch Margins. 21.a Statement Indicating If Your Firm Is A Large Or Small Business Under Naics Code 541990 (all Other Professional, Scientific, And Technical Services); If Small Business, Please Indicate Any Applicable Socio-economic Status [i.e., 8a, Small Disadvantaged Business (sdb), Hubzone, Veteran-owned Small Business (vosb), Service-disabled Veteran-owned Small Business (sdvosb), Or Women-owned Small Business (wosb)]. 22. If You Plan On Subcontracting To Other Companies In Order To Deliver Technical Capability, Please Provide Details On Exactly Which Tasks Will Be Assigned To Those Subcontractors; In Addition, Provide The Names Of Those Anticipated Subcontractors, And List The Anticipated Percentage Of Small Business Subcontracting. *note (limitations On Subcontracting): If You Are A Small Business Interested In Being The Prime Contractor For This Effort, Please Be Advised That Far Clause 52.219-14 (limitations On Subcontracting) (deviation 2021-o0008) Was Updated In September 2021. The Current Clause Adds The Definition Of “similarly Situated Entity” And The 50% Calculation For Compliance With The Clause. Small Business Prime Contractors May Now Count “first Tier Subcontractor” Work Performed By A “similarly Situated Entity” As If It Were Performed By The Prime Contractor Itself. to Assist In Our Market Research And Set-aside Determination For This Effort, If You Are A Small Business Interested In Priming This Effort And Plan To Utilize A “similarly Situated Entity” To Meet The Limitations On Subcontracting Requirements, Please Identify The Name & Unique Entity Id/cage Code Of The Specific Firm(s) You Intend To Partner/subcontract With To Meet The Requirements As Well As Their Sb Size Status Under The Naics That You As The Prime Would Assign For Their Workshare. Information Regarding Any Planned “similarly Situated Entity” Should Be Included In Answering Any Questions Outlined In The Ssn In Order To Assist The Government's Capability Determination.

Details: Construction Services Are Required For An Indefinite Delivery, Indefinite Quantity (idiq) Type Multiple Award Construction Contract (macc) ”) To Support The Pacific Deterrence Initiative Program With The Exercise Related Construction (erc), Unspecified Minor Military Construction (ummc), Us Code Title 10 Security Cooperation And Other Repair Projects In The Navfac Pacific Area Of Operations. It Is Anticipated That This Macc May Include Projects In Caroline Islands, Philippines, Northern Territory Australia, Papua New Guinea, Timor Leste, Singapore, Malaysia, Thailand, Indonesia, Vietnam, Nepal, Sri Lanka, Fiji, Maldives And Other Areas Under Navfac Pacific Cognizance. a Macc Is A Contract Awarded From A Single Solicitation, And May Result In Award To Multiple Contractors. This Procurement Consists Of One Solicitation With The Intent To Award A Minimum Of Three (3) Indefinite Delivery Indefinite Quantity (idiq) Type Construction Contracts To The Offerors Whose Proposals, Conforming To The Rfp, Represent The Most Advantageous Offers To The Government Resulting In The Best Value, Price And Technical Factors Considered. Successful Offerors Will Compete For Future Work During The Term Of The Contract. If Determined To Be In The Best Interest Of The Government, Less Than Three (3) Contracts May Be Awarded Or The Government May Cancel The Procurement. all Work Under The Macc Will Be Initiated By Task Orders That Will Be Competed Amongst Only The Macc Holders (firms Awarded One Of The Potential Contracts). Contractors Will Be Expected To Accomplish A Wide Variety Of Individual Construction Tasks. This Macc Will Encompass A Wide Range Of Design-build Projects That May Include New Facilities, Repair/renovation, And Upgrades To A Variety Of Facility Types Including, But Not Limited To, Building Facilities, Warehouses, Bridges, Wharves/piers, Dredging, Airfield Runways, Fuel Storage, Roads, Hangars, And Other Base Infrastructure Facilities Produced In Accordance With Nationally Recognized Industry, International, Federal, And/or Military Standards. The Selected Contractors Will Be Responsible For All Labor, Supervision, Engineering, Design, Materials, Equipment, Tools, Parts, Supplies, And Transportation To Perform All Of The Services Described In The Drawings And Specifications Provided For Each Individual Project. work To Be Performed Under The Macc Will Be Within The Primary North American Industry Classification System (naics) Code 236220 – Commercial And Institutional Building Construction. However, It Will Also Include Subsection 237 – Heavy And Civil Engineering Construction. this Is A Source Selection Procurement Requiring The Submission Of Both Technical And Price Proposals. Proposals Submitted In Response To This Solicitation Shall Be In The English Language And In U.s. Dollars. this Solicitation Will Utilize The Tradeoff Source Selection Process In Accordance With Far 15.101 And Far Subpart 15.3. All Technical Factors, When Combined, Are Considered Of Equal Importance To Past Performance. The Factors Are Anticipated To Be Factor 1 – Experience; Factor 2 – Past Performance; Factor 3 – Management Plan; And Factor 4 – Safety. the Request For Proposal (rfp) Will Be Available On Or About 6 June 2024 At The System For Award Management (sam) Website At Https://www.sam.gov. Revisions To Any Posted Documents Will Be Posted To The Sam.gov Website. It Is The Responsibility Of The Offeror To Check The Sam.gov Website Periodically For Any Revisions To The Posted Documents. Correspondence Will Be Via Facsimile Transmission, Unless Otherwise Noted In The Project Documents; Therefore, Each Offerors Submission Must Clearly Indicate A Working Facsimile Number. In Accordance With Far 4.11, All Prime Firms, Including Any Newly Formed Joint Ventures/limited Liability Companies (llcs), Are Required To Be Registered In Sam.gov At The Time The Proposal Is Submitted. Registration May Be Made Via The Website At Https://www.sam.gov. Printed Copies Or Cds Of The Rfp Will Not Be Issued. the Term Of The Contract Is Anticipated To Be 96 Months (base Period Of 60 Months And Three 12-month Option Periods) Or $990,000,000 For All Contracts Combined, Whichever Occurs First. Task Orders Will Typically Range Between $500,000 And $20,000,000. Task Orders May Be Above This Limit; However, Contractors Are Not Obligated To Accept Such Task Orders Under The General Terms Of The Contract. Task Orders Will Require Both Design And Construction Services. The Government Makes No Representation As To The Number Of Task Orders Or Actual Amount Of Work To Be Ordered; However, During The Term Of The Contract, A Minimum Of $10,000 Is Guaranteed For Each Awardee Under The Contract. As Task Orders Are Awarded That Exceed The $10,000, The $10,000 Minimum Guarantee Will Be Deobligated And The Government’s Obligation For The Minimum Guarantee For The Contract Will Be Satisfied. in Support Of The Design-build Task Orders, Macc Holders Shall Retain The Services Of Professional Architect-engineer (a-e) Firms Experienced With Multi-disciplined Architectural-engineering Design Efforts. A-e Firms Employed Shall Have Active U.s. Professional Registration Or Equivalent Qualifications. Note: During Contract Execution, U.s. Registration Will Be Required For All Architects Or Engineers Who Approve Designs. a One-time Pre-proposal Site Visit (ppsv) For The Seed Project, Command And Control Fusion Center, Camp Melchor Dela Cruz, Isabela, Philippines, Has Been Scheduled For 30 July 2024 At 9:00 A.m. Philippines Time (pht). This Site Visit Is To Provide Offerors With An Opportunity To Familiarize Themselves With The Jobsite And Conditions To Be Encountered And Is Not For The Purpose Of Answering Questions. It Is Recommended That Each Offeror Include An Attendee For Both The Prime Contractor And Subcontractor/dor. Those Interested In Attending The Site Visit Shall Submit The Following To Ms. Adele Murakami At Adele.m.murakami.civ@us.navy.mil On Or Before 13 June 2024 At 2:00 P.m. Hawaii Standard Time (hst). Late Submissions Will Not Be Accepted. instructions To Offerors For Ppsv Bar (base Access Request) 1. Provide Personnel Roster In An Excel Spreadsheet (see Page 2 Of The Attached "phil_bar_form1.pdf" For Needed Information And Proper Format). You May Submit A Maximum Of Four (4) Names (2 Primaries And 2 Alternates) But Only Two (2) Participants, One (1) Driver, And One (1) Vehicle, Per Offeror Shall Be Allowed To Attend The Ppsv. if You Have A Driver, He/she Can Enter The Base But Must Remain In The Vehicle Throughout The Site Visit. The Driver Is Not Permitted To Attend The Site Visit And Must Present A Valid Form Of Identification Or Passport For Base Access. 2. Combine All Ids Of Participants Into "a Single Pdf File", In Letter Size. Multiple Pdf Or Jpeg Files Shall Not Be Accepted. A. Pdf File Name Shall Be In The Format “company Name_ids”. (e.g. Mcdonalds_ids) B. Pdf File Shall Be Bookmarked. Format Bookmarks As “last Name, First Name” (e.g. Cruz, Juan) C. Do Not Password-protect The File. D. All Ids Should Be Arranged In Order According To The Personnel Roster In The Excel Spreadsheet. here Are The Preferred Forms Of Id: A. For Foreign Nationals: Only Valid Passport Bio Page Accepted. B. For Philippine Citizens: Any One Of The Following Are Acceptable. - Passport Bio Page - Philippine Identification (philid) / Ephilid, - Land Transportation Office (lto) Driver's License, Or - Professional Regulatory Commission (prc) Id 3. Company Business Profile (pdf Files Only) once The Requested Information Is Submitted, Offerors Will Receive A Bar With A Drn# Upon Approval From Joint United Stated Military Assistance Group (jusmag) Philippines. On The Day Of The Site Visit, The Offeror Must Present Their Approved Bar, Associated Form Of Id, And Digital Or Printed Copy Of Company Profile To Be Provided Before Base Entry. Offerors Shall Not Show Up For The Site Visit Without First Signing Up And Receiving An Approved Bar. the Number Of Attendees Shall Be Limited To No More Than Two (2) Participants And One (1) Driver Per Offeror. However, Offerors May Submit Base Access Request (bar) In The Excel Form Provided, For Up To Four (4) Individuals (two (2) Attendees And Two (2) Alternates) Per Offeror. Please Clearly Identify Alternates And Provide At Least 48 Hours Advanced Notice In The Event An Attendee Must Be Switched Out Or Be Replaced With An Approved Alternate. The Driver Can Enter The Base But Must Remain In The Vehicle Throughout The Site Visit. The Driver Is Not Permitted To Attend The Site Visit Or Replace Any Of The Attendees During The Site Visit And Must Present A Valid Form Of Identification Or Passport For Base Access. on The Day Of The Site Visit, Assembly Shall Be At Camp Melchor Dela Cruz In Gamu, Isabela, Ivo 17° 4'27.82"n, 121°51'52.40"e. attendees Shall Wear Safety Vests. Vests Or Shirts With A Company Logo Are Preferred. photography During The Site Visit Is Allowed Within The Confines Of The Project Site. Use Of Drones Is Prohibited.

Details: Title: Enhanced Situational Awareness Needs Statement the Department Of Defense (dod) Must Maintain Constant Vigilance, Ensuring That The U.s. Military Is Always Aware And Ready To Respond At A Moment’s Notice. The Future Of Conflict Threatens To Make The Battlespace Even More Complicated To Monitor. Conflict May Occur Not Only Around The Globe, But Within Or Across The Land, Sea, Air, Space, And Cyber Domains. Simultaneously Our Adversaries Implement Increasingly Sophisticated Ways To Mask Their Movements, As They Aim To Reduce The Time And Opportunity In Which The U.s. And Its Allies Can Disrupt Their Plans. modern Warfare Is Also Introducing An Exponentially Growing Number Of Autonomous Systems. If An Adversary Unleashes Thousands Of Drones, Solutions Are Needed To Ensure That The Sheer Number Of Targets Does Not Overwhelm Human Operators Trying To Track, Triage, And React To The Most Imminent Threats. Simultaneously We Must Seek To Empower Our Own Uncrewed Systems (uxs) To Navigate Around Obstacles In Complex Physical Environments And Maintain Course In Areas With Degraded Or Denied Connectivity. emerging Artificial Intelligence And Machine Learning (ai/ml) Solutions May Aid The Human Operator In Maintaining Situational Awareness Across An Increasingly Complex Battlespace. Technology Will Play A Key Role In Enabling An Operational Force To Observe An Unfolding Situation, Orient, Decide, And Effectively Act To Ensure The Success Of Their Mission. the Innovation & Modernization (i&m) Office, Within The Office Of The Under Secretary Of Defense For Research And Engineering (ousd (r&e)) Will Conduct A Solutions Meeting In Close Coordination With Usarpac, The U.s. Army Service Component For United States Indo-pacific Command, And Other Service And Dod Stakeholders. This Innovation Engagement Will Focus On Identifying And Influencing The Development Of Leap-ahead Solutions For Ensuring The U.s. And Our Allies Can React Faster Than Our Adversaries And Further Sharpen Our Competitive Advantage. ‘enhanced Situational Awareness’ Solutions Meeting october 29-30, 2024 In San Diego, California solutions Meetings Provide A Forum For Selected Technology Developers To Make Brief Technical Presentations And Engage With Dod And U.s. Interagency Representatives About Their Potential Solutions. The Submission Process, Detailed Below, Only Requires Basic Developer Information And 100 Words Or Less About A Proposed Solution To Be Considered For Participation. Results Of The Solutions Meeting Inform Government Decision-makers And Promote A Collaborative Ecosystem That Accelerates The Development And Transition Of Promising Innovative Technologies. a. Technology Need Descriptions the ‘enhanced Situational Awareness’ Solutions Meeting Seeks To Identify Emerging Technologies That Heighten Awareness Of Areas And Objects Of Interest; Enabling The Dod To Quickly React To New Information And Accomplish Mission Activities More Effectively. Technology Need Areas Include: automatic Or Aided Object Recognition: Ai/ml And/or Computer Vision (cv) Algorithms May Improve The Ability To Rapidly Detect, Characterize, Identify, Locate, And Track Objects Of Interest. Technologies May Involve One Or More Of The Following Capabilities: enable Object Recognition From Images And/or Video (streaming And Archived). Supporting Other Sensor Modalities, Such As Electro-optic Infrared (eo/ir), Will Also Be Considered. monitor And Identify Ground-based Objects Of Interest. Monitoring Other Domains (air, Maritime, Or Space) Or The Capability To Monitor Multiple Domains Will Also Be Considered. identify And Track Objects Of Interest In Adverse Weather, During Day And Night, And/or Throughout Congested Areas With Lots Of Environmental Clutter (e.g., In Urban Areas Or Under Vegetation). recognize Obscured Or Altered Objects That May Otherwise Hinder Detection And Identification. efficient Onboard Processing, Requiring Sensors To Only Alert When Key Objects Are Identified. pattern And Scene Change Detection: Recognizing ‘known’ Objects Of Interest Is Critical, But The Dod Also Needs To Monitor Broader Areas Of Interest. Awareness Of A Physical Area, And How Objects And Actors Typically Behave In That Environment, Reveals Valuable Insights. Technologies May Involve One Or More Of The Following Capabilities: pattern Of Life Analysis, Alerting On Changes Such As Increased Or Reduced Traffic In An Area. geo-fencing That Alerts And Tracks When Objects Enter Or Exit A Designated Area. generated Insights Based On Changes Between Current And Historical Data. scene Change Detection That Supports Battle Damage Assessments. autonomous Navigation Capabilities That Can Identify And Avoid Obstacles Or Dangerous Terrain. processing, Exploitation, And Dissemination (ped): Recognizing A Key Object Or Change Within The Constant Stream Of Incoming Data Allows Operators To React Faster, But Tools Are Still Needed To Ensure Action Is Taken At The Speed Of Relevance. Ped Solutions Are Meant To Make Data Usable, Available, And Insightful. Technologies May Involve One Or More Of The Following Capabilities: automated Data Entry, Messaging, Reporting And Alerting Solutions That Function Across Applications. automated Feedback And Evaluation Capability. ‘single Pane Of Glass’ Displays Based On Advanced Algorithms That Understand Analytical Workflows. visual Aids For Rapidly Orienting Operators, Such As Feature Extraction Or Visual Cues. archival Tools For Making Data More Discoverable And Accessible. b. What Is A Solutions Meeting solutions Meetings Provide A Forum For Connecting Technology Developers With The Dod To Accelerate The Discovery, Development, And Transition Of Innovative Solutions For Military Challenges. Invited Developers Each Provide An Unclassified 25-minute Technical Brief (including Q&a) On Their Solution To Attending U.s. Government Stakeholders And Invited Industry Peers. Briefs May Not Include Proprietary Information. Each Solutions Meeting Also Schedules Opportunities For Breakout Discussions For Further Promoting Collaboration Between Attendees. the “enhanced Situational Awareness” Solutions Meeting Will Be Held October 29-30, 2024, In San Diego, California. In-person Attendance Is Expected For All Developers And Government Attendees. technology Developers Selected To Brief Are Responsible For Their Own Travel And All Other Expenses Associated With Participation In The Solutions Meeting. The Dod Does Not Guarantee Funding Or Follow-up Work To Selected And/or Participating Technology Developers But May Provide Developers Additional Follow-on Opportunities Based On Applicability And Other Factors. c. Submission Instructions all Applications Must Be Submitted Via Email Before 5:00 Pm Edt, 03 September 2024 To Osd.pentagon.ousd-atl.mbx.rrto-innovation@mail.mil. the Following Information Is Required In The Application. email Subject Line: “enhanced Situational Awareness Solutions Meeting” all Application Information Below Must Be Contained In The Body Of The Email. No Attachments Are Allowed. company Name website Address point Of Contact (poc), Email, And Phone Number, And Alternate Poc (if Desired) a 100-word Or Less Description Of The Technology That The Company Plans To Discuss If Selected To Present At The Solutions Meeting. This Description Must Focus On The Technology And The Envisioned Use - Not A Description Of The Company. select One Of The Above Technology Areas (automatic Or Aided Object Recognition; Pattern And Scene Change Detection; Or Processing, Exploitation, And Dissemination) That Best Fits Your Technology Solution. do Not Submit Classified Information do Not Submit Acquisition Proposals. The Government Does Not Award Contracts Based Solely On This Announcement. Submission Of An Application Does Not Guarantee An Invitation To Participate In The ‘unleashing Data At Speed And Scale’ Solutions Meeting Or Any Other Dod Events. all Applications Must Be Received On Or Before 5:00 Pm Edt, 03 September 2024. Submission Of An Application Does Not Guarantee An Invitation To The Solutions Meeting. d. Protection Of Information protection Of Information: All Briefs Are Held At The Unclassified Level. Participating Technology Developers Are Reminded That Proprietary Information Is Not To Be Included During Technical Briefs. It Is The Responsibility Of The Participants To Not Divulge Any Proprietary Information During Briefs Or Other Discussions During The Solutions Meeting. The U.s. Government, Including Ousd R&e, Have No Rights To Any Intellectual Property Briefed Or Provided By Technology Developers As Part Of Their Participation In The Solutions Meeting. publications And Endorsements: Participants Shall Agree To Confer And Consult With I&m Prior To The Publication Of Any Press Release Directly Or Indirectly Related To The Solutions Meeting. The Innovation & Modernization Office (i&m) Will Confer And Consult With Any Participants Prior To The Publication Of Any Press Release That Directly Includes A Written Or Visual Reference To The Name Of Their Organization, Employees, Or Technology. Participants Will Not Use The Name, Logo, Or Images Of Any U.s. Government Organization, Employee, Or Contractor Without Prior Approval From The Relevant Organization. e. Additional Information university Affiliated Research Centers (uarcs), Federally Funded Research And Development Centers (ffrdcs), And/or Contractor Consultant/advisors To The Government May Review And Provide Support During Evaluation Of Applications. When Appropriate, Non-government Advisors May Be Used To Objectively Review A Particular Functional Area And Provide Comments And Recommendations To The Government. All Advisors Shall Comply With Procurement Integrity Laws And Shall Sign Non-disclosure And Rules Of Conduct/conflict Of Interest Statements. The Government Shall Take Into Consideration Requirements For Avoiding Conflicts Of Interest And Ensure Advisors Comply With Safeguarding Proprietary Data. Submission In Response To This Special Notice Constitutes Approval To Release The Submittal To Government Support Contractors.

Details: Description Republic Of The Philippines Film Development Council Of The Philippines 855 T.m. Kalaw Street, Ermita, Manila Tel: (02) 8251-7493 Loc. 120 Film Development Council Of The Philippines Request For Quotation Office/ End-user: Communications Unit Date: June 20, 2024 Company Name: Film Development Council Of The Philippines P.r. No.: Address: 855 T.m. Kalaw St., Ermita, Manila Tel. No./ Fax No.: (02) 8251-7493 Loc. 120 Tin No.: 226-381-796-000 Please Quote Your Lowest Price On The Item(s) Listed Below, Subject To The General Conditions Stated Below And Submit Your Quotation Duly Signed By Your Representative. Please Submit The Filled-up Form On Or Before 26 June 2024, 9:00 Am To Bac@fdcp.gov.ph General Conditions: 1. Delivery Period Within Dates Indicated In The Purchase Order Form. Administrative Penalties To Sec. 69 Of The Revised Irr-ra 1984 Shall Be Imposed For Non-delivery Without Valid Reason. 2. Warranty Shall Be For A Minimum Of Three (3) Months For Supplies & Materials; One Year For Equipment From Date Of Acceptance By The End-user. 3. Price Validity Shall Be For A Period Of Sixty (60) Calendar Days. Regina Fernandez 4. Philgeps Registration Certificate/mayor's Permit/dti/bank Name/account/branch Shall Be Attached Upon Submission Of The Quotation. Assistant Bac Secretariat 5. Bidders Shall Submit Original Brochures Showing Certification Of The Product, If Applicable. 6. Please Indicate The Brand For Each Items Being Offered. 7. The Approved Budget Ceiling For This Procurement Is Php 207,760.00 Unit Item & Description Quantity Unit Price Total Production Equipment Pcs Sandisk 128gb Extreme Pro Cfast 2.0 Memory Card 4 - For Sony Fx3 & Fx6 Camera - Sandisk's Cfast 2.0 Memory Cards Deliver The Performance Needed For Broadcast, Cinema, And Photography Industries - Write Speeds Of Up To 450 Mb/s - High Speeds For Full Hd & Dci 4k Video Recording " - Tested Under Extreme Conditions. This Memory Card Can Operate In Temperatures Ranging From 23 To 158°f (-5 To 70°c)" Pcs Ugreen Usb A & Usb C To Cfast Card Reader 2 In 1 Usb 3.0 Card Reader 3 - For All Cameras " - Transfer A 1g File In 2.5 Seconds 525mb/s Read 450mb/s Write " - Come With Usb - A 3.01 & Usb C - Plug And Play - Driver For All System Such As Linux, Mac Os, Windows, Ipad Os And Chrome Os - Anodized Aluminum Alloy Shell - Effectively Increase Wear Resistance For Long-lasting Use Pcs Generic Quick Release Plate Qr 323 With 200pl-14 Compatible Plate 5 - For All Cameras - 1/4' Metal Screw Attachment (to Attach To Your Camera) - Durable Rubber Pad To Stop Expensive Slips - Full Manfrotto 200-pl14 Compatibility - Screwless Designed D-ring To Attache/detach Quickly From The Camera - New Generic Camera Quick Release Plate - Mount Your Camera On A Tripod Easily With This Quick Release Plate - This Camera Quick Release Plate Will Quickly Screw Onto Your Tripod To Properly And Securely Position Your Camera For The Best Shooting Angle Pcs Vello Bg-s7 Battery Grip For Sony A7r Iv 1 - For Sony A7riv - Holds 2 Np-fz100 Rechargeable Batteries - Extended Grip For Vertical Composition - Shutter Release Button For Vertical Use - Secondary Control Set For Vertical Use Pcs Vello Bg-s6 Battery Grip For Sony A7r Iii 1 - For Sony A7riii - Holds 2 Np-fz100 Rechargeable Batteries - Extended Grip For Vertical Composition - Shutter Release Button For Vertical Use - Front And Rear Dials Units Zgcine V160 142wh V-mount Battery (9600mah) 1 - Add An Ultracompact Professional Battery To Power Your Rig With This V160 142wh V-mount Battery From Zgcine. The Battery Provides A Large 142wh, 9600mah Capacity And A 14.8v, 15a Output That Fits Onto Small Rigs Such As Gimbals And Drones. A Usb-c Cable Is Included. There Are Multiple Ways To Power Your Camera And Accessories, As Well As Power The Battery Itself, Including A D-tap Input/output, One Usb-c Output, And One Usb-c Input/output. - One Of The Usb-c Ports Can Utilize Pd Fast Chargers, Which Can Charge The Battery To Full In 2.5 Hours With A 100w Pd Charger Or 3.5 Hours Via A 65w Pd Charger. The D-tap Port And One Of The Usb-c Ports Can Be Used As An Input To Charge The Battery Using An Optional Fast Charger, Or A Standard V-mount Charger Can Charge The Battery. The V160 Features Multiple Circuit Protection Features, Including Overcurrent, Overpower, Overvoltage, Overcharge, Short Circuit, Temperature, And Reset Protection. Units Tilta Camera Cage For Sony Fx6 Advanced Kit “battery Plate: V-mount” 1 - V-mount - Quick Release Baseplate For Sony Fx6(es-t20-qrbp)*1 - Multi-functional Top Plate For Sony Fx6(es-t20-mtp)*1 - Side Arm For Sony Fx6(es-t20-sa)*1 - Battery Plate For Sony Fx6 – V Mount(es-t20-btp-v)*1 - Wireless Video Mounting Bracket For Sony Fx6(es-t20-wvm) Units Smallrig 15mm Lws Universal Lens Support Bsl2681 3 - Support For 15mm Lws Rods - Y-bracket For Lens - 53.5mm Vertical Adjustment - Transfers Weight Off The Lens Mount Units Smallrig Magic Arm For Sony Fx6 / Fs5 / Fs5 Ii With Dual Ball Heads, 1/4"-20 Mounting Screws 6 - Designed For Fx6 / Fs5 / Fs5 Ii, Convenient To Attach The Monitor, Wireless Transmitter, And Other Accessories - Stretchable Pins And Anti-twist Positioning Pins For Preventing Deflection And Ensuring Safety - A Magnetic Wrench At The Bottom Of The Thumb Lever For Tightening The Thumbwheels - Weighing Only 3.1 Oz (88g), Compact And Easy To Carry Around And Store Units For Camera Monitor Power Cable 3 Coiled 2m/6.5ft D-tap 2pin Male To Dc 5.5 X 2.1mm Adapter Cable Extension Elastic Line For Anton V-mount Bat-tery Dslr Cage Rig Power Supply - D-tap Male 2 Pin Rewirable Plug. - Dc 5.5 * 2.1mm Plug Right Angled. - Cord Od Is 4.5mm Pu Spring Coiled With 0.5mm² Copper Wire. - The Cable Can Be Extended To 98cm/38.5inch Long. - Accessory Replacement For V-mount Battery Dslr Camera Cage Rig. Units Tilta - 2 X 15mm Aluminum Rod – 200mm Black 3 - For Sony Fx3 & Fx6 Tilta Accessories - These Rods Are Compatible With 15mm Studio And 15mm Lws Baseplates And Provide A Way To Mount Accessories To Your Camera Rig. The Price Is For A Pair Of 15mm X 200mm Black Rods. Units Camera Tripods - Smallrig Freeblazer Heavy-duty Aluminum Alloy Tripod Kit Ad-80 4163 4 - Smallrig Freeblazer Heavy-duty Aluminum Alloy Tripod Kit Ad-80 4163, Is A Video Tripod Kit To Facilitate Video Shooting. The Tripod Has Adjustable Legs, Quickly Retracted And Extended Via Flip Locks, With A Height Ranging From 87 Cm To 191cm And A Folded Length Of 90.5cm. The Video Head, Featuring A Damping System, Allows You To Pan The Camera Smoothly **nothing Follows** Total: Source Of Fund: Warranty: Delivery Period: Price Validity: After Having Carefully Need & Accepted Your General Conditions, We Quote You On The Item(s) At Prices Note Above. If The Space Of Provided On The Delivery Period, Warranty & Price Validity Are Left Blank, It Means That I Concur W/ The Terms & Conditions Specified By Fdcp Procurement Unit. ___________________________ Printed Name/signature/date Name Of Company: Address: Name Of Representative: Tin: Email: Contact No.: