Drone Tenders
Drone Tenders
Department Of Social Welfare And Development Region Xii Tender
Software and IT Solutions
Philippines
Details: Description Department Of Social Welfare And Development Field Office Xii Regional Center, Brgy. Carpenter Hill, Koronadal City, 9506 Philippine Bidding Documents For The Procurement Of Supply And Delivery Of Ict Equipment For Pamana Staff Project Identification No. Dswd12-slp-2024-04-007 Government Of The Republic Of The Philippines Sixth Edition July 2020 Preface These Philippine Bidding Documents (pbds) For The Procurement Of Goods Through Competitive Bidding Have Been Prepared By The Government Of The Philippines For Use By Any Branch, Constitutional Commission Or Office, Agency, Department, Bureau, Office, Or Instrumentality Of The Government Of The Philippines, National Government Agencies, Including Government-owned And/or Controlled Corporations, Government Financing Institutions, State Universities And Colleges, And Local Government Unit. The Procedures And Practices Presented In This Document Have Been Developed Through Broad Experience, And Are For Mandatory Use In Projects That Are Financed In Whole Or In Part By The Government Of The Philippines Or Any Foreign Government/foreign Or International Financing Institution In Accordance With The Provisions Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184. The Bidding Documents Shall Clearly And Adequately Define, Among Others: (i) The Objectives, Scope, And Expected Outputs And/or Results Of The Proposed Contract Or Framework Agreement, As The Case May Be; (ii) The Eligibility Requirements Of Bidders; (iii) The Expected Contract Or Framework Agreement Duration, The Estimated Quantity In The Case Of Procurement Of Goods, Delivery Schedule And/or Time Frame; And (iv) The Obligations, Duties, And/or Functions Of The Winning Bidder. Care Should Be Taken To Check The Relevance Of The Provisions Of The Pbds Against The Requirements Of The Specific Goods To Be Procured. If Duplication Of A Subject Is Inevitable In Other Sections Of The Document Prepared By The Procuring Entity, Care Must Be Exercised To Avoid Contradictions Between Clauses Dealing With The Same Matter. Moreover, Each Section Is Prepared With Notes Intended Only As Information For The Procuring Entity Or The Person Drafting The Bidding Documents. They Shall Not Be Included In The Final Documents. The Following General Directions Should Be Observed When Using The Documents: A. All The Documents Listed In The Table Of Contents Are Normally Required For The Procurement Of Goods. However, They Should Be Adapted As Necessary To The Circumstances Of The Particular Procurement Project. B. Specific Details, Such As The “name Of The Procuring Entity” And “address For Bid Submission,” Should Be Furnished In The Instructions To Bidders, Bid Data Sheet, And Special Conditions Of Contract. The Final Documents Should Contain Neither Blank Spaces Nor Options. C. This Preface And The Footnotes Or Notes In Italics Included In The Invitation To Bid, Bid Data Sheet, General Conditions Of Contract, Special Conditions Of Contract, Schedule Of Requirements, And Specifications Are Not Part Of The Text Of The Final Document, Although They Contain Instructions That The Procuring Entity Should Strictly Follow. D. The Cover Should Be Modified As Required To Identify The Bidding Documents As To The Procurement Project, Project Identification Number, And Procuring Entity, In Addition To The Date Of Issue. E. Modifications For Specific Procurement Project Details Should Be Provided In The Special Conditions Of Contract As Amendments To The Conditions Of Contract. For Easy Completion, Whenever Reference Has To Be Made To Specific Clauses In The Bid Data Sheet Or Special Conditions Of Contract, These Terms Shall Be Printed In Bold Typeface On Sections I (instructions To Bidders) And Iii (general Conditions Of Contract), Respectively. F. For Guidelines On The Use Of Bidding Forms And The Procurement Of Foreign-assisted Projects, These Will Be Covered By A Separate Issuance Of The Government Procurement Policy Board. Table Of Contents Glossary Of Acronyms, Terms, And Abbreviations ………………………….4 Section I. Invitation To Bid……………………………………………………..7 Section Ii. Instructions To Bidders…………………………………………...11 1. 12 2. 12 3. 12 4. 12 5. 12 6. 13 7. 13 8. 13 9. 14 10. 14 11. 14 12. 14 13. 15 14. 15 15. 16 16. 16 17. 16 18. 16 19. 16 20. 17 21. 17 Section Iii. Bid Data Sheet …………………………………………………..18 Section Iv. General Conditions Of Contract ……………………...………..22 1. 23 2. 23 3. 23 4. 23 5. 24 6. 24 Section V. Special Conditions Of Contract ………………………………….25 Section Vi. Schedule Of Requirements ……………………………………....29 Section Vii. Technical Specifications …………………………………………33 Section Viii. Checklist Of Technical And Financial Documents …………..39 Glossary Of Acronyms, Terms, And Abbreviations Abc – Approved Budget For The Contract. Bac – Bids And Awards Committee. Bid – A Signed Offer Or Proposal To Undertake A Contract Submitted By A Bidder In Response To And In Consonance With The Requirements Of The Bidding Documents. Also Referred To As Proposal And Tender. (2016 Revised Irr, Section 5[c]) Bidder – Refers To A Contractor, Manufacturer, Supplier, Distributor And/or Consultant Who Submits A Bid In Response To The Requirements Of The Bidding Documents. (2016 Revised Irr, Section 5[d]) Bidding Documents – The Documents Issued By The Procuring Entity As The Bases For Bids, Furnishing All Information Necessary For A Prospective Bidder To Prepare A Bid For The Goods, Infrastructure Projects, And/or Consulting Services Required By The Procuring Entity. (2016 Revised Irr, Section 5[e]) Bir – Bureau Of Internal Revenue. Bsp – Bangko Sentral Ng Pilipinas. Consulting Services – Refer To Services For Infrastructure Projects And Other Types Of Projects Or Activities Of The Gop Requiring Adequate External Technical And Professional Expertise That Are Beyond The Capability And/or Capacity Of The Gop To Undertake Such As, But Not Limited To: (i) Advisory And Review Services; (ii) Pre-investment Or Feasibility Studies; (iii) Design; (iv) Construction Supervision; (v) Management And Related Services; And (vi) Other Technical Services Or Special Studies. (2016 Revised Irr, Section 5[i]) Cda - Cooperative Development Authority. Contract – Refers To The Agreement Entered Into Between The Procuring Entity And The Supplier Or Manufacturer Or Distributor Or Service Provider For Procurement Of Goods And Services; Contractor For Procurement Of Infrastructure Projects; Or Consultant Or Consulting Firm For Procurement Of Consulting Services; As The Case May Be, As Recorded In The Contract Form Signed By The Parties, Including All Attachments And Appendices Thereto And All Documents Incorporated By Reference Therein. Cif – Cost Insurance And Freight. Cip – Carriage And Insurance Paid. Cpi – Consumer Price Index. Ddp – Refers To The Quoted Price Of The Goods, Which Means “delivered Duty Paid.” Dti – Department Of Trade And Industry. Exw – Ex Works. Fca – “free Carrier” Shipping Point. Fob – “free On Board” Shipping Point. Foreign-funded Procurement Or Foreign-assisted Project– Refers To Procurement Whose Funding Source Is From A Foreign Government, Foreign Or International Financing Institution As Specified In The Treaty Or International Or Executive Agreement. (2016 Revised Irr, Section 5[b]). Framework Agreement – Refers To A Written Agreement Between A Procuring Entity And A Supplier Or Service Provider That Identifies The Terms And Conditions, Under Which Specific Purchases, Otherwise Known As “call-offs,” Are Made For The Duration Of The Agreement. It Is In The Nature Of An Option Contract Between The Procuring Entity And The Bidder(s) Granting The Procuring Entity The Option To Either Place An Order For Any Of The Goods Or Services Identified In The Framework Agreement List Or Not Buy At All, Within A Minimum Period Of One (1) Year To A Maximum Period Of Three (3) Years. (gppb Resolution No. 27-2019) Gfi – Government Financial Institution. Gocc – Government-owned And/or –controlled Corporation. Goods – Refer To All Items, Supplies, Materials And General Support Services, Except Consulting Services And Infrastructure Projects, Which May Be Needed In The Transaction Of Public Businesses Or In The Pursuit Of Any Government Undertaking, Project Or Activity, Whether In The Nature Of Equipment, Furniture, Stationery, Materials For Construction, Or Personal Property Of Any Kind, Including Non-personal Or Contractual Services Such As The Repair And Maintenance Of Equipment And Furniture, As Well As Trucking, Hauling, Janitorial, Security, And Related Or Analogous Services, As Well As Procurement Of Materials And Supplies Provided By The Procuring Entity For Such Services. The Term “related” Or “analogous Services” Shall Include, But Is Not Limited To, Lease Or Purchase Of Office Space, Media Advertisements, Health Maintenance Services, And Other Services Essential To The Operation Of The Procuring Entity. (2016 Revised Irr, Section 5[r]) Gop – Government Of The Philippines. Gppb – Government Procurement Policy Board. Incoterms – International Commercial Terms. Infrastructure Projects – Include The Construction, Improvement, Rehabilitation, Demolition, Repair, Restoration Or Maintenance Of Roads And Bridges, Railways, Airports, Seaports, Communication Facilities, Civil Works Components Of Information Technology Projects, Irrigation, Flood Control And Drainage, Water Supply, Sanitation, Sewerage And Solid Waste Management Systems, Shore Protection, Energy/power And Electrification Facilities, National Buildings, School Buildings, Hospital Buildings, And Other Related Construction Projects Of The Government. Also Referred To As Civil Works Or Works. (2016 Revised Irr, Section 5[u]) Lgus – Local Government Units. Nfcc – Net Financial Contracting Capacity. Nga – National Government Agency. Philgeps - Philippine Government Electronic Procurement System. Procurement Project – Refers To A Specific Or Identified Procurement Covering Goods, Infrastructure Project Or Consulting Services. A Procurement Project Shall Be Described, Detailed, And Scheduled In The Project Procurement Management Plan Prepared By The Agency Which Shall Be Consolidated In The Procuring Entity's Annual Procurement Plan. (gppb Circular No. 06-2019 Dated 17 July 2019) Psa – Philippine Statistics Authority. Sec – Securities And Exchange Commission. Slcc – Single Largest Completed Contract. Supplier – Refers To A Citizen, Or Any Corporate Body Or Commercial Company Duly Organized And Registered Under The Laws Where It Is Established, Habitually Established In Business And Engaged In The Manufacture Or Sale Of The Merchandise Or Performance Of The General Services Covered By His Bid. (item 3.8 Of Gppb Resolution No. 13-2019, Dated 23 May 2019). Supplier As Used In These Bidding Documents May Likewise Refer To A Distributor, Manufacturer, Contractor, Or Consultant. Un – United Nations. Section I. Invitation To Bid Notes On The Invitation To Bid The Invitation To Bid (ib) Provides Information That Enables Potential Bidders To Decide Whether To Participate In The Procurement At Hand. The Ib Shall Be Posted In Accordance With Section 21.2 Of The 2016 Revised Irr Of Ra No. 9184. Apart From The Essential Items Listed In The Bidding Documents, The Ib Should Also Indicate The Following: A. The Date Of Availability Of The Bidding Documents, Which Shall Be From The Time The Ib Is First Advertised/posted Until The Deadline For The Submission And Receipt Of Bids; B. The Place Where The Bidding Documents May Be Acquired Or The Website Where It May Be Downloaded; C. The Deadline For The Submission And Receipt Of Bids; And D. Any Important Bid Evaluation Criteria (e.g., The Application Of A Margin Of Preference In Bid Evaluation). The Ib Should Be Incorporated In The Bidding Documents. The Information Contained In The Ib Must Conform To The Bidding Documents And In Particular To The Relevant Information In The Bid Data Sheet. Invitation To Bid For The Dswd12-slp-2024-04-007 Procurement Of Supply And Delivery Of Ict Equipment For Pamana Staff 1. The Department Of Social Welfare And Development Field Office Xii, Through The General Appropriations Act Fy 2023 Intends To Apply The Sum Of Two Million And Three Hundred Forty-eight Thousand Pesos Only (php 2,348,000.00) Being The Abc To Payments Under The Contract For Dswd12-slp-2024-04-007 Procurement Of Supply And Delivery Of Ict Equipment For Pamana Staff. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Department Of Social Welfare And Development Field Office Xii Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required To Commence Twenty (20) Days Upon Receipt Of Purchase Order. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 2. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 3. Prospective Bidders May Obtain Further Information From Department Of Social Welfare And Development Field Office Xii – Bids And Awards Committee Secretariat Office And Inspect The Bidding Documents At The Address Given Below During 8:00a.m. To 5:00 P.m.. 4. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On April 02, 2024 To April 24, 2024, 05:00 P.m. From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos Only (php5, 000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, By Facsimile, Or Through Electronic Means. 5. The Department Of Social Welfare And Development Field Office Xii Will Hold A Pre-bid Conference On April 11, 2024, 10:00 A.m. At Dswd Field Office 12, Regional Center, Brgy. Carpenter Hill, Koronadal City, Which Shall Be Open To Prospective Bidders. 6. Bids Must Be Duly Received By The Bac Secretariat Through (i) Manual Submission At The Office Address Indicated Below On Or Before April 25, 2024, 9:30 A.m. Late Bids Shall Not Be Accepted. 7. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 8. Bid Opening And Evaluation Shall Be On April 25, 2024, 10:30 A.m. At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 9. Prospective Bidders Are Hereby Reminded, As Follows: A. Bidding Documents For Eligibility And Financial Envelopes Shall Comprise The Following: I. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). *one (1) Mother Envelope For Technical Component Documents, Composed Of Three (3) Sub Envelopes For (original, Copy 1, And Copy 2). Ii. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). *one (1) Mother Envelope For Financial Component Documents, Composed Of Three (3) Sub Envelopes For (original, Copy 1, And Copy 2). 10. The Department Of Social Welfare And Development Field Office Xii Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Dswd 12 – Bac Secretariat Head Administrative Division – Procurement Section Dswd Field Office 12, Regional Center, Brgy. Carpenter Hill, Koronadal City, 9506 Procurement.fo12@dswd.gov.ph 12. You May Visit The Following Websites: For Downloading Of Bidding Documents: Https://fo12.dswd.gov.ph/bid-bulletin/ Https://www.philgeps.gov.ph April 02, 2024 (sgd.) Jackiya A. Lao Bac Chairperson Section Ii. Instructions To Bidders Notes On The Instructions To Bidders This Section On The Instruction To Bidders (itb) Provides The Information Necessary For Bidders To Prepare Responsive Bids, In Accordance With The Requirements Of The Procuring Entity. It Also Provides Information On Bid Submission, Eligibility Check, Opening And Evaluation Of Bids, Post-qualification, And On The Award Of Contract. 1. Scope Of Bid The Procuring Entity, Department Of Social Welfare And Development Field Office Xii Wishes To Receive Bids For The Procurement Of Supply And Delivery Of Ict Equipment For Pamana Staff, With Identification Number Dswd12-slp-2024-04-007. The Procurement Project (referred To Herein As “project”) Is Composed Of One Lot Or Item, The Details Of Which Are Described In Section Vii (technical Specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding As Indicated Below For 2024 Approved Gaa In The Amount Of Two Million And Three Hundred Forty-eight Thousand Pesos Only (php 2,348,000.00) 2.2. The Source Of Funding The General Appropriations Act. 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manuals And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Ib By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Verified And Accepted The General Requirements Of This Project, Including Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, And Coercive Practices The Procuring Entity, As Well As The Bidders And Suppliers, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. Foreign Ownership Exceeding Those Allowed Under The Rules May Participate Pursuant To: I. When A Treaty Or International Or Executive Agreement As Provided In Section 4 Of The Ra No. 9184 And Its 2016 Revised Irr Allow Foreign Bidders To Participate; Ii. Citizens, Corporations, Or Associations Of A Country, Included In The List Issued By The Gppb, The Laws Or Regulations Of Which Grant Reciprocal Rights Or Privileges To Citizens, Corporations, Or Associations Of The Philippines; Iii. When The Goods Sought To Be Procured Are Not Available From Local Suppliers; Or Iv. When There Is A Need To Prevent Situations That Defeat Competition Or Restrain Trade. 5.3. Pursuant To Section 23.4.1.3 Of The 2016 Revised Irr Of Ra No.9184, The Bidder Shall Have An Slcc That Is At Least One (1) Contract Similar To The Project The Value Of Which, Adjusted To Current Prices Using The Psa’s Cpi, Must Be At Least Equivalent To: A. For The Procurement Of Expendable Supplies: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Fifty Percent (50%) Of The Abc. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.1 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un, Subject To Domestic Preference Requirements Under Itb Clause 18. 7. Subcontracts 7.1. The Procuring Entity Has Prescribed That: A. Subcontracting Is Not Allowed. 8. Pre-bid Conference The Procuring Entity Will Hold A Pre-bid Conference For This Project On April 11, 2024, 10:00 A.m. And At Its Physical Address Department Of Social Welfare And Development Field Office 12, Regional Center, Brgy. Carpenter Hill, Koronadal City As Indicated In Paragraph 6 Of The Ib. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, On/or Before April 15, 2024 Or At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 10.2. The Bidder’s Slcc As Indicated In Itb Clause 5.3 Should Have Been Completed Within Two (2) Years Prior To The Deadline For The Submission And Receipt Of Bids. 10.3. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. Similar To The Required Authentication Above, For Contracting Parties To The Apostille Convention, Only The Translated Documents Shall Be Authenticated Through An Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 11.2. If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification Issued By Dti Shall Be Provided By The Bidder In Accordance With Section 43.1.3 Of The 2016 Revised Irr Of Ra No. 9184. 11.3. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.4. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 9184. 12. Bid Prices 12.1. Prices Indicated On The Price Schedule Shall Be Entered Separately In The Following Manner: A. For Goods Offered From Within The Procuring Entity’s Country: I. The Price Of The Goods Quoted Exw (ex-works, Ex-factory, Ex-warehouse, Ex-showroom, Or Off-the-shelf, As Applicable); Ii. The Cost Of All Customs Duties And Sales And Other Taxes Already Paid Or Payable; Iii. The Cost Of Transportation, Insurance, And Other Costs Incidental To Delivery Of The Goods To Their Final Destination; And Iv. The Price Of Other (incidental) Services, If Any, Listed In The Bds. B. For Goods Offered From Abroad: I. Unless Otherwise Stated In The Bds, The Price Of The Goods Shall Be Quoted Delivered Duty Paid (ddp) With The Place Of Destination In The Philippines As Specified In The Bds. In Quoting The Price, The Bidder Shall Be Free To Use Transportation Through Carriers Registered In Any Eligible Country. Similarly, The Bidder May Obtain Insurance Services From Any Eligible Source Country. Ii. The Price Of Other (incidental) Services, If Any, As Listed In The Bds. 13. Bid And Payment Currencies 13.1. For Goods That The Bidder Will Supply From Outside The Philippines, The Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Accepted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreign Currencies, Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 13.2. Payment Of The Contract Price Shall Be Made In: A. Philippine Pesos. 14. Bid Security 14.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 14.2. The Bid And Bid Security Shall Be Valid Until August 25, 2024. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 15. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. If The Procuring Entity Allows The Submission Of Bids Through Online Submission Or Any Other Electronic Means, The Bidder Shall Submit An Electronic Copy Of Its Bid, Which Must Be Digitally Signed. An Electronic Copy That Cannot Be Opened Or Is Corrupted Shall Be Considered Non-responsive And, Thus, Automatically Disqualified. 16. Deadline For Submission Of Bids 16.1. The Bidders Shall Submit On The Specified Date And Time And Either At Its Physical Address Or Through Online Submission As Indicated In Paragraph 7 Of The Ib. 17. Opening And Preliminary Examination Of Bids 17.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 17.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 18. Domestic Preference 18.1. The Procuring Entity Will Grant A Margin Of Preference For The Purpose Of Comparison Of Bids In Accordance With Section 43.1.2 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Entity’s Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed,” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of The 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, Bidders May Submit A Proposal On Any Of The Lots Or Items, And Evaluation Will Be Undertaken On A Per Lot Or Item Basis, As The Case Maybe. In This Case, The Bid Security As Required By Itb Clause 14 Shall Be Submitted For Each Lot Or Item Separately. 19.3. The Descriptions Of The Lots Or Items Shall Be Indicated In Section Vii (technical Specifications), Although The Abcs Of These Lots Or Items Are Indicated In The Bds For Purposes Of The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184. The Nfcc Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 19.4. The Project Shall Be Awarded As One Project Having Several Items Grouped Into Several Lots, Which Shall Be Awarded As Separate Contracts Per Lot. 19.5. Except For Bidders Submitting A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation, All Bids Must Include The Nfcc Computation Pursuant To Section 23.4.1.4 Of The 2016 Revised Irr Of Ra No. 9184, Which Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. For Bidders Submitting The Committed Line Of Credit, It Must Be At Least Equal To Ten Percent (10%) Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 20. Post-qualification 20.2. Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps) And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract 21.1. The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Section Iii. Bid Data Sheet Notes On The Bid Data Sheet The Bid Data Sheet (bds) Consists Of Provisions That Supplement, Amend, Or Specify In Detail, Information, Or Requirements Included In The Itb Found In Section Ii, Which Are Specific To Each Procurement. This Section Is Intended To Assist The Procuring Entity In Providing The Specific Information In Relation To Corresponding Clauses In The Itb And Has To Be Prepared For Each Specific Procurement. The Procuring Entity Should Specify In The Bds Information And Requirements Specific To The Circumstances Of The Procuring Entity, The Processing Of The Procurement, And The Bid Evaluation Criteria That Will Apply To The Bids. In Preparing The Bds, The Following Aspects Should Be Checked: A. Information That Specifies And Complements Provisions Of The Itb Must Be Incorporated. B. Amendments And/or Supplements, If Any, To Provisions Of The Itb As Necessitated By The Circumstances Of The Specific Procurement, Must Also Be Incorporated. Bid Data Sheet Itb Clause 5.3 For This Purpose, Contracts Similar To The Project Shall Be: A. Ict Equipment B. Completed Within At Least Two (2) Years Prior To The Deadline For The Submission And Receipt Of Bids. 7.1 Subcontracting Is Not Allowed 12 The Price Of The Goods Shall Be Quoted Ddp Or The Applicable International Commercial Terms (incoterms) For This Project. 14.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration, Or Any Of The Following Forms And Amounts: A. The Amount Of Not Less Than Php 46,960.00 Or The Amount Equivalent To Two Percent (2%) Of Abc If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; Or B. The Amount Of Not Less Than Php 117,400.00 Or The Amount Equivalent To Five Percent (5%) Of Abc If Bid Security Is In Surety Bond. 19.1 1. All Forms Must Be Submitted Using The Prescribed Format Provided By The Procuring Entity And Completed Without Any Alterations To Their Format, And No Substitute Form Shall Be Accepted. All Blank Spaces Shall Be Filled In With The Information Requested. 2. Any Interlineations, Erasures, Or Overwriting Shall Be Valid Only If They Are Signed Or Initialed By The Duly Authorized Representative/s Of The Bidder, Otherwise, Bids Shall Be Subject To An Outright Disqualification. 20.2 Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Supplier Of The Notice Of Post Qualification From The Bac That The Supplier Has The Lowest Calculated Bid (lcb) Or Single Calculated Bid (scb), The Supplier Shall Submit And/or Present The Following Requirements For Post Qualification In Accordance To Section 34 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra9184: 1. Present Original Copy Of The Following: A. Latest Income Tax Return And Business Tax Return ( For 4th Quarter Of 2023) B. Latest Value Added Tax (vat) Return ( For 4th Quarter Of 2023, If Applicable) Only Tax Returns Filed And Taxes Paid Through The Bir Electronic Filing & Payment System (efps) Shall Be Accepted. C. Valid Philgeps Registration Certificate (platinum Membership) (all Pages) D. Valid Registration Certificate From Securities And Exchange Commission (sec) For Corporations, Or From Department Of Trade And Industry (dti) For Sole Proprietorship, Or From Cooperative Development Authority (cda) For Cooperatives; E. Valid Business/mayor’s Permit Issued By The City Or Municipality Where The Principal Place Of Business Of The Bidder Is Located; F. Valid Tax Clearance Per Eo 398, Series Of 2005, As Finally Reviewed And Approved By The Bir; G. Bureau Of Internal Revenue (bir) Registration Certificate. H. Copy Of Contracts Or Po’s, Notice Of Award (noa) And Notice To Proceed (ntp) For All On-going Contracts I. End-user’s Acceptance, Official Receipt (duplicate Or Triplicate Copy) Or Sales Invoice With Collection Receipt/s (duplicate Or Triplicate Copy) Relative To Single Largest Completed Contract J. Company Profile And Organizational Chart. Company Printed Brochure May Be Included. K. Vicinity Map/location Of The Business. L. Other Appropriate Licenses And Permits Required By Law And Stated In The Bidding Documents. Failure To Submit Any Of The Post-qualification Requirements On Time, Or A Finding Against The Veracity Thereof, Shall Disqualify The Bidder For Award. Provided In The Event That A Finding Against The Veracity Of Any Of The Documents Submitted Is Made, It Shall Cause The Forfeiture Of The Bid Security In Accordance With Section 69 Of The Irr Of Ra 9184. Note: For Post Qualification Purposes Only 20.3 Each Bidder Shall Submit The Following In One (1) “mother” Envelope Duly Sealed And Labeled, Containing Two (2) Sets Of Envelopes: First Envelope Containing Three (3) Sets Of Eligibility And Technical Documents Duly Sealed And Marked As Original Copy, Copy One And Copy Two. Second Envelope Containing Three (3) Sets Of Financial Bid Documents Duly Sealed And Marked As Original Copy, Copy One And Copy Two. 20.4 All Envelopes Shall Be Labeled/marked As Follows: To : Jackiya A. Lao Chairperson Bids And Awards Committee Dswd-field Office 12 From :_______________________________ (name Of Bidder In Capital Letters) Address: _______________________________ (address Of Bidder In Capital Letters) Project: Procurement Of Supply And Delivery Of Ict Equipment For Pamana Staff Bid Ref No.: Itb No. Dswd12-slp-2024-04-007 Approved Budget For The Contract : ₱2,348,000.00 Do Not Open Before: 25 April 2024; 10:30 A.m. 21.2 No Further Instructions Section Iv. General Conditions Of Contract Notes On The General Conditions Of Contract The General Conditions Of Contract (gcc) In This Section, Read In Conjunction With The Special Conditions Of Contract In Section V And Other Documents Listed Therein, Should Be A Complete Document Expressing All The Rights And Obligations Of The Parties. Matters Governing Performance Of The Supplier, Payments Under The Contract, Or Matters Affecting The Risks, Rights, And Obligations Of The Parties Under The Contract Are Included In The Gcc And Special Conditions Of Contract. Any Complementary Information, Which May Be Needed, Shall Be Introduced Only Through The Special Conditions Of Contract. 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. Additional Requirements For The Completion Of This Contract Shall Be Provided In The Special Conditions Of Contract (scc). 2. Advance Payment And Terms Of Payment 2.1. Advance Payment Of The Contract Amount Is Provided Under Annex “d” Of The Revised 2016 Irr Of Ra No. 9184. 2.2. The Procuring Entity Is Allowed To Determine The Terms Of Payment On The Partial Or Staggered Delivery Of The Goods Procured, Provided Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted In Accordance With Prevailing Accounting And Auditing Rules And Regulations. The Terms Of Payment Are Indicated In The Scc. 3. Performance Security Within Ten (10) Calendar Days From Receipt Of The Notice Of Award By The Bidder From The Procuring Entity But In No Case Later Than The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr Of Ra No. 9184. 4. Inspection And Tests The Procuring Entity Or Its Representative Shall Have The Right To Inspect And/or To Test The Goods To Confirm Their Conformity To The Project Specifications At No Extra Cost To The Procuring Entity In Accordance With The Generic Procurement Manual. In Addition To Tests In The Scc, Section Vii (technical Specifications) Shall Specify What Inspections And/or Tests The Procuring Entity Requires, And Where They Are To Be Conducted. The Procuring Entity Shall Notify The Supplier In Writing, In A Timely Manner, Of The Identity Of Any Representatives Retained For These Purposes. All Reasonable Facilities And Assistance For The Inspection And Testing Of Goods, Including Access To Drawings And Production Data, Shall Be Provided By The Supplier To The Authorized Inspectors At No Charge To The Procuring Entity. 5. Warranty 5.1 In Order To Assure That Manufacturing Defects Shall Be Corrected By The Supplier, A Warranty Shall Be Required From The Supplier As Provided Under Section 62.1 Of The 2016 Revised Irr Of Ra No. 9184. 5.2 The Procuring Entity Shall Promptly Notify The Supplier In Writing Of Any Claims Arising Under This Warranty. Upon Receipt Of Such Notice, The Supplier Shall, Repair Or Replace The Defective Goods Or Parts Thereof Without Cost To The Procuring Entity, Pursuant To The Generic Procurement Manual. 6. Liability Of The Supplier The Supplier’s Liability Under This Contract Shall Be As Provided By The Laws Of The Republic Of The Philippines. If The Supplier Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. Section V. Special Conditions Of Contract Notes On The Special Conditions Of Contract Similar To The Bds, The Clauses In This Section Are Intended To Assist The Procuring Entity In Providing Contract-specific Information In Relation To Corresponding Clauses In The Gcc Found In Section Iv. The Special Conditions Of Contract (scc) Complement The Gcc, Specifying Contractual Requirements Linked To The Special Circumstances Of The Procuring Entity, The Procuring Entity’s Country, The Sector, And The Goods Purchased. In Preparing This Section, The Following Aspects Should Be Checked: A. Information That Complements Provisions Of The Gcc Must Be Incorporated. B. Amendments And/or Supplements To Provisions Of The Gcc As Necessitated By The Circumstances Of The Specific Purchase, Must Also Be Incorporated. However, No Special Condition Which Defeats Or Negates The General Intent And Purpose Of The Provisions Of The Gcc Should Be Incorporated Herein. Special Conditions Of Contract Gcc Clause Delivery And Documents – For Purposes Of The Contract, “exw,” “fob,” “fca,” “cif,” “cip,” “ddp” And Other Trade Terms Used To Describe The Obligations Of The Parties Shall Have The Meanings Assigned To Them By The Current Edition Of Incoterms Published By The International Chamber Of Commerce, Paris. The Delivery Terms Of This Contract Shall Be As Follows: Delivery Terms: Strictly 20 Days Upon Receipt Of Purchase Order/one-time, No Extension At Dswd Field Office Xii Delivery Of The Goods Shall Be Made By The Supplier In Accordance With The Terms Specified In Section Vi (schedule Of Requirements). Incidental Services – (refer To Terms Specified In Section Vi And Section Vii) The Supplier Is Required To Provide All Of The Following Services, Including Additional Services, If Any, Specified In Section Vi. Schedule Of Requirements: The Contract Price For The Goods Shall Include The Prices Charged By The Supplier For Incidental Services And Shall Not Exceed The Prevailing Rates Charged To Other Parties By The Supplier For Similar Services. Spare Parts – (refer To Terms Specified In Section Vi And Section Vii) Packaging – (refer To Terms Specified In Section Vi And Section Vii) The Supplier Shall Provide Such Packaging Of The Goods As Is Required To Prevent Their Damage Or Deterioration During Transit To Their Final Destination, As Indicated In This Contract. The Packaging Shall Be Sufficient To Withstand, Without Limitation, Rough Handling During Transit And Exposure To Extreme Temperatures, Salt And Precipitation During Transit, And Open Storage. Packaging Case Size And Weights Shall Take Into Consideration, Where Appropriate, The Remoteness Of The Goods’ Final Destination And The Absence Of Heavy Handling Facilities At All Points In Transit. Transportation – Not Applicable Where The Supplier Is Required Under This Contract To Transport The Goods To A Specified Place Of Destination Within The Philippines, Defined As The Project Site, Transport To Such Place Of Destination In The Philippines, Including Insurance And Storage, As Shall Be Specified In This Contract, Shall Be Arranged By The Supplier, And Related Costs Shall Be Included In The Contract Price. The Procuring Entity Accepts No Liability For The Damage Of Goods During Transit Other Than Those Prescribed By Incoterms For Ddp Deliveries. In The Case Of Goods Supplied From Within The Philippines Or Supplied By Domestic Suppliers Risk And Title Will Not Be Deemed To Have Passed To The Procuring Entity Until Their Receipt And Final Acceptance At The Final Destination. Intellectual Property Rights – Not Applicable The Supplier Shall Indemnify The Procuring Entity Against All Third-party Claims Of Infringement Of Patent, Trademark, Or Industrial Design Rights Arising From Use Of The Goods Or Any Part Thereof. 2.2 The Terms Of Payment Shall Be As Follows: Partial Payment Must Correspond To The Value Of Goods Delivered And Accepted After The Appropriate Inspection And Acceptance Procedures. Proof Of Deliveries (delivery Receipts Or Acknowledgement Receipts) Must Be Signed By An Authorized Person To Support Claims For Payment. Proof Of Deliveries (delivery Receipts/acknowledgment Receipts) Must Be Signed By Authorized Person To Support Claims For Payment. 4 The Inspections And Tests That Will Be Conducted By The Inspection (dswd Inspection Committee), And Final Acceptance By The Dswd Acceptance Committee, And End-user. Section Vi. Schedule Of Requirements Dswd12-slp-2024-04-007 Procurement Of Supply And Delivery Of Ict Equipment For Pamana Staff The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. Item Number Description Quantity Total Delivered, Weeks/months 1 Projector With Projector Screen • 3,800 Or Greater Than Lumens Of Color And White Brightness I Native Xga Resolution: 1920 X 1080 (full Hd) • 4:3 Performance • Long Lamp Life Upo To 12,000 Hours In Eco Mode • Built-in Moderator Function For Easy Sharing Using Iprojection • Advanced Network Connectivity • Projector Features 1.2x Optical Zoom 1 Unit 1 Unit Delivery Of The Goods Is Required To Commence By Twenty (20) Days Upon The Receipt Of Purchase Order (po)/one Time 2 Printer With Adf And Scanner • Print, Scan, Copy, And Fax • Compact Integrated Tank Design • Print Speeds Up To 15.5 Ipm For Black And 8.5ipm For Color • Auto-duplex Printing • Adf Capability • Ethernet & Wi-fi Direct • Borderless Printing Up To A4 Size • Spill-free In Refilling 7 Units 7 Units 3 Laptop With Bag (top Of The Line Brand) • Windows 11 Professional 64-bit • Ms Office Professional 2021 (license) • Intel Core I5 At Least 11th Gen Processor • 8 Gb Ddr4 System Memory, Upgradable To 32gb Two Sodimm Modules • Internal Storage 8gb/512gb • Nvidia Geforce Rtx 2050 4gb-gddr6 • 15.6 Inches Display With Ips Technology • With Camera • With Backpack/sling Bag 20 Units 20 Units 4 Desktop • Windows 11 Professional 64 Bit • Memory 8gb Ddr 4-266 Sdram 91x8gb • 500 Gb 7200 Rpm Sata Internal Storage • Icorei5 At Least 11th Gen Processor • 3 Ghz Processor Speed • 310 W Internal Power Supply • Keyboard With Volume Control • 128 Gb M.2 Ssd • Monitor: 23-inch To 25” – 1080p 4 Units 4 Units 5 Computer Tablet • Octa Core 2.2 Ghz Cpu Speed • 10.090mah Battery Capacity • 8mp Af + 5mp Front Camera Resolution • Front Camera Resolution 5.0mp • 2560 X 1600 Main Display Resolution • 6gb Memory • 128gb Storage • 1tb Expandable Micro Sd External Memory Support • Video Recording Resolution Fhd (1920x1080) @30fps • With Pen Support • Wifi Direct • Bluetooth Version V5.0 • Dimension 185.8x284.8x6.3 • Preferrably Android Latest Architecture Os 11 Units 11 Units 6 Document Scanner • Scanner Type: Automatic Document Feeder (adf) • Resolution: 600 Dpi (optical) • Scan Modes: Color, Grayscale, Monochrome • Duplex Scanning: Yes • Single Pass Duplex: Yes • Scan Speed: A4 45ppm Long 30ppm • Automatic Image Corrections: Yes • File Formats: Bmp, Jpeg, Multi-page Tiff, Pdf, Png, Tiff 2 Units 2 Units 7 External Hard Drive • Digital Storage Capacity 1 Tb • Hardware Interface Usb 3.0 • Cache Size 1 • Usb 3.1 Gen 1 Interface With The Support Of Uasp • Three-stage Shock Protection System • One-touch Auto Back-up Button • Interface: Usb 3.1 Gen 1 • Usb Type: Micro Usb To Usb Type C 6 Units 6 Units 8 Digital Voice Recorder • Record In Mp3/lpcm With A High Sensitivity S-microphone • Up To 4gb Of Built-in Storage, Expandable Via Microsd Cards • Up Tp 55 Hours Of Battery Life For Extended Recording • Direct Usb Built-in For Easy Connection To Pc • Auto Voice Recording Reduces Background Noise • Built-in Lithium Battery With 3-minute Quick Charge For 1 Hour Of Recording 3 Units 3 Units 9 Drone • Up To 4k60p Video & 48mp Raw Stills • Tri-directional Obstacle Avoidance • Regulation-friendly 8.8 Oz Weight • Remote Control With 5.5” Built-in Display Included Up To 34 Minutes Of Flight Time • Rotating Gimbal For Vertical Shooting • Slow Motion Video At Full Hd 1080p120 Up To 7.5 Mile Range With Ocusync 3 Focustrack Subject Tracking System Foldable Design For Easy Travel/storage • Ability Of 60 Fps Filming At 4k • 700 Cd/m² Brightness Of The Display Which Supports Footage To Full Hd 1080p Resolution 1 Unit 1 Unit Warranty: • 3 Years Parts – 3 Years Labor Only 3 Years Onsite (3-3-3) • The Supplier Must Have A Service Center Within The Region Xii Or Nearby Region For An Easy And Immediate Response • The Supplier Should Have A Satisfactory Performance On All Its On-going And Completed Contracts • The Item Delivered By The Supplier Found To Be Damages/broken/not Functional Or Factory Defects, Should Be Replaced Immediately, Should Not To Be Repaired. • The Item Must Be In The Current Catalogue And Not End Of Life • Sample Demo Unit During The Bid Opening • Certification Of Authorized Dealership Of The Bidder • The Supplier Must Have A Physical Store Within The Region Xii Or Nearby Regions • Warranty Certificate Form The Brand Being Offered • The Equipment Must Come From A Credible Manufacturer With Support Through A Distributor • The Equipment Must Be Brand New And Unused • Must Be International Brand Name With Existence Of At Least 10 Years In The Philippines • Delivery Terms: Strictly 20 Days, No Extension • Deliver To Dswd Region Xii Field Office, Koronadal City Conforme: Name Of Company: _____________________________________________________ Signature Of Bidder Or Authorized Representative: ______________________________ Name And Designation: ___________________________________________________ Date: _______________________ Section Vii. Technical Specifications Notes For Preparing The Technical Specifications A Set Of Precise And Clear Specifications Is A Prerequisite For Bidders To Respond Realistically And Competitively To The Requirements Of The Procuring Entity Without Qualifying Their Bids. In The Context Of Competitive Bidding, The Specifications (e.g. Production/delivery Schedule, Manpower Requirements, And After-sales Service/parts, Descriptions Of The Lots Or Items) Must Be Prepared To Permit The Widest Possible Competition And, At The Same Time, Present A Clear Statement Of The Required Standards Of Workmanship, Materials, And Performance Of The Goods And Services To Be Procured. Only If This Is Done Will The Objectives Of Transparency, Equity, Efficiency, Fairness, And Economy In Procurement Be Realized, Responsiveness Of Bids Be Ensured, And The Subsequent Task Of Bid Evaluation And Post-qualification Facilitated. The Specifications Should Require That All Items, Materials And Accessories To Be Included Or Incorporated In The Goods Be New, Unused, And Of The Most Recent Or Current Models, And That They Include Or Incorporate All Recent Improvements In Design And Materials Unless Otherwise Provided In The Contract. Samples Of Specifications From Previous Similar Procurements Are Useful In This Respect. The Use Of Metric Units Is Encouraged. Depending On The Complexity Of The Goods And The Repetitiveness Of The Type Of Procurement, It May Be Advantageous To Standardize The General Technical Specifications And Incorporate Them In A Separate Subsection. The General Technical Specifications Should Cover All Classes Of Workmanship, Materials, And Equipment Commonly Involved In Manufacturing Similar Goods. Deletions Or Addenda Should Then Adapt The General Technical Specifications To The Particular Procurement. Care Must Be Taken In Drafting Specifications To Ensure That They Are Not Restrictive. In The Specification Of Standards For Equipment, Materials, And Workmanship, Recognized Philippine And International Standards Should Be Used As Much As Possible. Where Other Particular Standards Are Used, Whether National Standards Or Other Standards, The Specifications Should State That Equipment, Materials, And Workmanship That Meet Other Authoritative Standards, And Which Ensure At Least A Substantially Equal Quality Than The Standards Mentioned, Will Also Be Acceptable. The Following Clause May Be Inserted In The Special Conditions Of Contract Or The Technical Specifications. Sample Clause: Equivalency Of Standards And Codes Wherever Reference Is Made In The Technical Specifications To Specific Standards And Codes To Be Met By The Goods And Materials To Be Furnished Or Tested, The Provisions Of The Latest Edition Or Revision Of The Relevant Standards And Codes Shall Apply, Unless Otherwise Expressly Stated In The Contract. Where Such Standards And Codes Are National Or Relate To A Particular Country Or Region, Other Authoritative Standards That Ensure Substantial Equivalence To The Standards And Codes Specified Will Be Acceptable. Reference To Brand Name And Catalogue Number Should Be Avoided As Far As Possible; Where Unavoidable They Should Always Be Followed By The Words “or At Least Equivalent.” References To Brand Names Cannot Be Used When The Funding Source Is The Gop. Where Appropriate, Drawings, Including Site Plans As Required, May Be Furnished By The Procuring Entity With The Bidding Documents. Similarly, The Supplier May Be Requested To Provide Drawings Or Samples Either With Its Bid Or For Prior Review By The Procuring Entity During Contract Execution. Bidders Are Also Required, As Part Of The Technical Specifications, To Complete Their Statement Of Compliance Demonstrating How The Items Comply With The Specification. Technical Specifications Dswd12-slp-2024-04-007 Procurement Of Supply And Delivery Of Ict Equipment For Pamana Staff Item Specification Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution Subject To The Applicable Laws And Issuances.] 1 Projector With Projector Screen – 1 Unit • 3,800 Or Greater Than Lumens Of Color And White Brightness I Native Xga Resolution: 1920 X 1080 (full Hd) • 4:3 Performance • Long Lamp Life Upo To 12,000 Hours In Eco Mode • Built-in Moderator Function For Easy Sharing Using Iprojection • Advanced Network Connectivity • Projector Features 1.2x Optical Zoom 2 Printer With Adf And Scanner – 7 Units • Print, Scan, Copy, And Fax • Compact Integrated Tank Design • Print Speeds Up To 15.5 Ipm For Black And 8.5ipm For Color • Auto-duplex Printing • Adf Capability • Ethernet & Wi-fi Direct • Borderless Printing Up To A4 Size • Spill-free In Refilling 3 Laptop With Bag (top Of The Line Brand) – 20 Units • Windows 11 Professional 64-bit • Ms Office Professional 2021 (license) • Intel Core I5 At Least 11th Gen Processor • 8 Gb Ddr4 System Memory, Upgradable To 32gb Two Sodimm Modules • Internal Storage 8gb/512gb • Nvidia Geforce Rtx 2050 4gb-gddr6 • 15.6 Inches Display With Ips Technology • With Camera • With Backpack/sling Bag 4 Desktop – 4 Units • Windows 11 Professional 64 Bit • Memory 8gb Ddr 4-266 Sdram 91x8gb • 500 Gb 7200 Rpm Sata Internal Storage • Icorei5 At Least 11th Gen Processor • 3 Ghz Processor Speed • 310 W Internal Power Supply • Keyboard With Volume Control • 128 Gb M.2 Ssd • Monitor: 23-inch To 25” – 1080p 5 Computer Tablet – 11 Units • Octa Core 2.2 Ghz Cpu Speed • 10.090mah Battery Capacity • 8mp Af + 5mp Front Camera Resolution • Front Camera Resolution 5.0mp • 2560 X 1600 Main Display Resolution • 6gb Memory • 128gb Storage • 1tb Expandable Micro Sd External Memory Support • Video Recording Resolution Fhd (1920x1080) @30fps • With Pen Support • Wifi Direct • Bluetooth Version V5.0 • Dimension 185.8x284.8x6.3 • Preferrably Android Latest Architecture Os 6 Document Scanner – 2 Units • Scanner Type: Automatic Document Feeder (adf) • Resolution: 600 Dpi (optical) • Scan Modes: Color, Grayscale, Monochrome • Duplex Scanning: Yes • Single Pass Duplex: Yes • Scan Speed: A4 45ppm Long 30ppm • Automatic Image Corrections: Yes • File Formats: Bmp, Jpeg, Multi-page Tiff, Pdf, Png, Tiff 7 External Hard Drive – 6 Units • Digital Storage Capacity 1 Tb • Hardware Interface Usb 3.0 • Cache Size 1 • Usb 3.1 Gen 1 Interface With The Support Of Uasp • Three-stage Shock Protection System • One-touch Auto Back-up Button • Interface: Usb 3.1 Gen 1 • Usb Type: Micro Usb To Usb Type C 8 Digital Voice Recorder – 3 Units • Record In Mp3/lpcm With A High Sensitivity S-microphone • Up To 4gb Of Built-in Storage, Expandable Via Microsd Cards • Up Tp 55 Hours Of Battery Life For Extended Recording • Direct Usb Built-in For Easy Connection To Pc • Auto Voice Recording Reduces Background Noise • Built-in Lithium Battery With 3-minute Quick Charge For 1 Hour Of Recording 9 Drone – 1 Unit • Up To 4k60p Video & 48mp Raw Stills • Tri-directional Obstacle Avoidance • Regulation-friendly 8.8 Oz Weight • Remote Control With 5.5” Built-in Display Included Up To 34 Minutes Of Flight Time • Rotating Gimbal For Vertical Shooting • Slow Motion Video At Full Hd 1080p120 Up To 7.5 Mile Range With Ocusync 3 Focustrack Subject Tracking System Foldable Design For Easy Travel/storage • Ability Of 60 Fps Filming At 4k • 700 Cd/m² Brightness Of The Display Which Supports Footage To Full Hd 1080p Resolution Warranty: • 3 Years Parts – 3 Years Labor Only 3 Years Onsite (3-3-3) • The Supplier Must Have A Service Center Within The Region Xii Or Nearby Region For An Easy And Immediate Response • The Supplier Should Have A Satisfactory Performance On All Its On-going And Completed Contracts • The Item Delivered By The Supplier Found To Be Damages/broken/not Functional Or Factory Defects, Should Be Replaced Immediately, Should Not To Be Repaired. • The Item Must Be In The Current Catalogue And Not End Of Life • Sample Demo Unit During The Bid Opening • Certification Of Authorized Dealership Of The Bidder • The Supplier Must Have A Physical Store Within The Region Xii Or Nearby Regions • Warranty Certificate Form The Brand Being Offered • The Equipment Must Come From A Credible Manufacturer With Support Through A Distributor • The Equipment Must Be Brand New And Unused • Must Be International Brand Name With Existence Of At Least 10 Years In The Philippines • Delivery Terms: Strictly 20 Days, No Extension • Deliver To Dswd Region Xii Field Office, Koronadal City Conforme: Name Of Company: _____________________________________________________ Signature Of Bidder Or Authorized Representative: ______________________________ Name And Designation: ___________________________________________________ Date: _______________________ Section Viii. Checklist Of Technical And Financial Documents Notes On The Checklist Of Technical And Financial Documents The Prescribed Documents In The Checklist Are Mandatory To Be Submitted In The Bid, But Shall Be Subject To The Following: A. Gppb Resolution No. 09-2020 On The Efficient Procurement Measures During A State Of Calamity Or Other Similar Issuances That Shall Allow The Use Of Alternate Documents In Lieu Of The Mandated Requirements; Or B. Any Subsequent Gppb Issuances Adjusting The Documentary Requirements After The Effectivity Of The Adoption Of The Pbds. The Bac Shall Be Checking The Submitted Documents Of Each Bidder Against This Checklist To Ascertain If They Are All Present, Using A Non-discretionary “pass/fail” Criterion Pursuant To Section 30 Of The 2016 Revised Irr Of Ra No. 9184. Checklist Of Technical And Financial Documents I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages) In Accordance With Section 8.5.2 Of The Irr; Technical Documents ⬜ (b) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (c) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided For In Sections 23.4.1.3 And 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184, Within The Relevant Period As Provided In The Bidding Documents; And ⬜ (d) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission Or Original Copy Of Notarized Bid Securing Declaration; And ⬜ (e) Conformity With The Technical Specifications, Which May Include Production/delivery Schedule, Manpower Requirements, And/or After-sales/parts, If Applicable; And ⬜ (f) Original Duly Signed Omnibus Sworn Statement (oss) And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ (g) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc) Or A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation. Class “b” Documents ⬜ (h) If Applicable, A Duly Signed Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Ii. Financial Component Envelope ⬜ (i) Original Of Duly Signed And Accomplished Financial Bid Form; And ⬜ (j) Original Of Duly Signed And Accomplished Price Schedule(s). Other Documentary Requirements Under Ra No. 9184 (as Applicable) ⬜ (k) [for Foreign Bidders Claiming By Reason Of Their Country’s Extension Of Reciprocal Rights To Filipinos] Certification From The Relevant Government Office Of Their Country Stating That Filipinos Are Allowed To Participate In Government Procurement Activities For The Same Item Or Product. ⬜ (l) Certification From The Dti If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity.
Closing Date25 Apr 2024
Tender AmountPHP 2.3 Million (USD 40.9 K)
TECHNICAL EDUCATION & SKILLS DEVELOPMENT AUTHORITY CENTRAL Tender
Corrigendum : Closing Date Modified
Philippines
Details: Description Lot 1 – Supply And Delivery Of Microcomputers And Peripherals Lot 1 - Attachment 1 Supply And Delivery Schedule Of Microcomputers And Peripherals Instructions To Bidder: (1) Submit A Fully Priced Supply, Delivery And Price Schedule. All Rows And Columns Must Be Filled Out According To Your Offer. (2) If Your Proposed Delivery Schedule/(s) Exceed/(s) The Required Delivery Schedule/(s) Set Out Below, Please Provide Justification / Explanation. Item Description Unit Qty. Unit Price Total Price Delivery Schedule 1 Laptop Operating System: Ios Screen Size:15.3" Screen Resolution: 2880x1864 Pixels Processor: M2 8-core Pu, 10-core Gpu Storage: 256gb Ssd Ram: 8gb Software: Includes Licensed Office Productivity Software Accessories: Includes Wireless Mouse Warranty: 1 Year Unit 1 Within Thirty (30) Working Days From The Date Of Signing Of The Contract 2 Laptop Processor: Core I5 12500h Storage: 512gb M.2 Nvme Pcie Ssd Ram: 8gb Gddr5 Software: Includes Licensed Office Productivity Software Warranty: 1 Year Unit 3 Within Thirty (30) Working Days From The Date Of Signing Of The Contract 3 Desktop/ Computer Processor: Core I7-13700f 13th Gen Storage: 1tb Nvme M.2 Ssd + 1tb Hdd Ram: 32gb Ddr5 6000mhz Graphics Card: Rtx4060 Ti Monitor: 27’’ Full Hd, 144hz Refresh Rate Software: Includes Licensed Office Productivity Software Accessories: Includes Mechanical Keyboard And Mouse Warranty: 1 Year Unit 6 Within Thirty (30) Working Days From The Date Of Signing Of The Contract 4 Projector Resolution: 800x600p Brightness: 4000 Lumens Screen Size: 300 Inches Lamp Life: 6000 Hours Resolution Support: Vga (640 X 480) To Full Hd (1920 X 1080) Projection System: 0.65'' Wxga Frequency: 120hz Unit 1 Within Thirty (30) Working Days From The Date Of Signing Of The Contract Item Description Unit Qty. Unit Price Total Price Delivery Schedule Operating System: Hd Android System With Hdmi Connector Warranty: 1 Year 5 Laser Meter Measuring Range: 80m Measuring Accuracy: ± 1.5mm Battery: Type Aaa 2 × 1.5 V Dimensions:116 × 44 × 26 Mm Warranty: 1 Year Unit 3 Within Thirty (30) Working Days From The Date Of Signing Of The Contract 6 Drone Sensor: 1/2.3-inch Cmos Sensor Photo Resolution: 12-megapixel Photos Video Resolution: 2.7k Video Gimbal: Three-axis Gimbal Wind Resistance: Up To 10.7 M/s Maximum Flight Time: 31 Minutes Transmission Range: Up To 10km (using O2 Transmission) Warranty: 2 Years Unit 1 Within Thirty (30) Working Days From The Date Of Signing Of The Contract 7 Wireless Router Wifi Data Rate: • 802.11a: Up To 54 Mbps • Wifi 5 (802.11ac): Up To 867 Mbps Operating Frequency: 2.4ghz / 5ghz Processor: 74kc Mips Processor With 64 Kb I Cache Memory: 16 Mb Flash, 128 Mb Ram I/o Ports • Rj45 For Gigabits Baset For Wan X 1, • Rj45 For Gigabits Baset For Lan X 4 • Usb 2.0 X 1 Warranty: 1 Year Unit 2 Within Thirty (30) Working Days From The Date Of Signing Of The Contract 8 Network Printer A3 Printer Type: Compact A3 Wi-fi All-in-one Ink Tank Printer Print Resolution: 4800 X 1200dpi Print Speed: • 38ppm For Black & White And • 24ppm For Colour Paper Handling: • 250-sheet Front Tray For Standard Paper Sizes • Rear Media Feed For A3+ Size Adf: 35-sheet Capacity For A4 Size Display: Lcd Screen Functions: Print, Scan, Copy Ink System: Uses 101 Series Ink Bottles (b, Y, C, M) Warranty: 1 Year Unit 3 Within Thirty (30) Working Days From The Date Of Signing Of The Contract 9 Group Videoconfe Rencing System With Mic And Speaker Set Camera Full-hd Video Camera • Resolution: 1080p30 (full Hd, 40 Frames Per Second) • Field Of View: 90° • Pan & Tilt: O Pan: 230° O Tilt: 130° • Codec: H.264 Uvc 1.5 With Scalable Video Coding (svc) • Tripod Mounting Thread: 1/4" – 20 Speakerphone Set 1 Within Thirty (30) Working Days From The Date Of Signing Of The Contract Item Description Unit Qty. Unit Price Total Price Delivery Schedule High-quality Duplex Speakerphone • Microphones O Array: 4 X Omnidirectional O Frequency Response: 100 Hz - 11 Khz O Sensitivity: -28 Db ±3 Db • Speakers O Frequency Response: 120 - 14 Khz O Sensitivity: 83 Dbspl ±3 Db At 1 W / 1 M O Max Output: 91 Dbspl O Distortion: <5% From 200 Hz Additional Features Wireless Remote Control Use With Industry Standard Platforms Warranty: 1 Year 10 Scanner Scan Weight: 50 Gsm To 209 Gsm Connectivity: Usb 2.0 Warranty: 1 Year Piece 2 Within Thirty (30) Working Days From The Date Of Signing Of The Contract 11 Monitor Monitor Specifications Panel Size: 27 Inches Aspect Ratio: 16:9 Backlight Type: Led Panel Type: Ips Resolution: 1920x1080 (full Hd) Color Space (srgb): 99% Display Colors: 16.7m Refresh Rate (max): 180hz Flicker-free: Yes Color Temp. Selection: Yes (4 Modes) Low Blue Light: Yes Audio Feature Speaker: Yes (2wx2) I/o Ports Displayport: 1.2 X 1 Hdmi: (v2.0) X 2 Earphone Jack: Yes Warranty: 1 Year Piece 4 Within Thirty (30) Working Days From The Date Of Signing Of The Contract Lot 1 - Attachment 2 Technical Specifications Of Microcomputers And Peripherals Instruction To Bidder: (1) All Rows And Columns Must Be Completely Filled Out According To Your Offer. Do Not Leave Any Row Or Column Blank. (2) If Your Offered Technical Specifications Are Different From The Preferred Technical Specifications, Please Provide Justification / Explanation. Item No. Name Of The Equipment Preferred Technical Specifications Offered Technical Specifications Accessories (if Any) Spare Parts (if Any) Installation And Training Warranty Of Equipment/parts 1 Laptop Operating System: Ios Screen Size:15.3" Screen Resolution: 2880x1864 Pixels Processor: M2 8-core Pu, 10-core Gpu Storage: 256gb Ssd Ram: 8gb Software: Includes Licensed Office Productivity Software Warranty: 1 Year [please Fill Out With Your Offered Specifications] [please Fill Out With Your Offered Accessories, If Any, Otherwise Write “n/a”] [please Fill Out With Your Offered Spare Parts, If Any, Otherwise Write “n/a”] [please Fill Out If Any, Otherwise Write “n/a”] [warranty Should Be For A Minimum Of One (1) Year From Delivery And Tesda’s Acceptance] 2 Laptop Processor: Core I5 12500h Storage: 512gb M.2 Nvme Pcie Ssd Ram: 8gb Gddr5 Software: Includes Licensed Office Productivity Software Warranty: 1 Year [please Fill Out With Your Offered Specifications] [please Fill Out With Your Offered Accessories, If Any, Otherwise Write “n/a”] [please Fill Out With Your Offered Spare Parts, If Any, Otherwise Write “n/a”] [please Fill Out If Any, Otherwise Write “n/a”] [warranty Should Be For A Minimum Of One (1) Year From Delivery And Tesda’s Acceptance] 3 Desktop/ Computer Processor: Core I7-13700f 13th Gen Storage: 1tb Nvme M.2 Ssd + 1tb Hdd Ram: 32gb Ddr5 6000mhz Graphics Card: Rtx4060 Ti Monitor: 27’’ Full Hd, 144hz Refresh Rate [please Fill Out With Your Offered Specifications] [please Fill Out With Your Offered Accessories, If Any, Otherwise Write “n/a”] [please Fill Out With Your Offered Spare Parts, If Any, Otherwise Write “n/a”] [please Fill Out If Any, Otherwise Write “n/a”] [warranty Should Be For A Minimum Of One (1) Year From Delivery And Tesda’s Acceptance] Item No. Name Of The Equipment Preferred Technical Specifications Offered Technical Specifications Accessories (if Any) Spare Parts (if Any) Installation And Training Warranty Of Equipment/parts Software: Includes Licensed Office Productivity Software Accessories: Includes Mechanical Keyboard And Mouse Warranty: 1 Year 4 Projector Resolution: 800x600p Brightness: 4000 Lumens Screen Size: 300 Inches Lamp Life: 6000 Hours Resolution Support: Vga (640 X 480) To Full Hd (1920 X 1080) Projection System: 0.65'' Wxga Frequency: 120hz Operating System: Hd Android System With Hdmi Connector Warranty: 1 Year [please Fill Out With Your Offered Specifications] [please Fill Out With Your Offered Accessories, If Any, Otherwise Write “n/a”] [please Fill Out With Your Offered Spare Parts, If Any, Otherwise Write “n/a”] [please Fill Out If Any, Otherwise Write “n/a”] [warranty Should Be For A Minimum Of One (1) Year From Delivery And Tesda’s Acceptance] 5 Laser Meter Measuring Range: 80m Measuring Accuracy: ± 1.5mm Battery: Type Aaa 2 × 1.5 V Dimensions:116 × 44 × 26 Mm Warranty: 1 Year [please Fill Out With Your Offered Specifications] [please Fill Out With Your Offered Accessories, If Any, Otherwise Write “n/a”] [please Fill Out With Your Offered Spare Parts, If Any, Otherwise Write “n/a”] [please Fill Out If Any, Otherwise Write “n/a”] [warranty Should Be For A Minimum Of One (1) Year From Delivery And Tesda’s Acceptance] 6 Drone -sensor: 1/2.3-inch Cmos Sensor Photo Resolution: 12-megapixel Photos Video Resolution: 2.7k Video Gimbal: Three-axis Gimbal Wind Resistance: Up To 10.7 M/s Maximum Flight Time: 31 Minutes Transmission Range: Up To 10km (using O2 Transmission) Warranty: 2 Years [please Fill Out With Your Offered Specifications] [please Fill Out With Your Offered Accessories, If Any, Otherwise Write “n/a”] [please Fill Out With Your Offered Spare Parts, If Any, Otherwise Write “n/a”] [please Fill Out If Any, Otherwise Write “n/a”] [warranty Should Be For A Minimum Of Two (2) Years From Delivery And Tesda’s Acceptance] 7 Wireless Router Wifi Data Rate: • 802.11a: Up To 54 Mbps • Wifi 5 (802.11ac) : Up To 867 Mbps Operating Frequency: 2.4ghz / 5ghz Processor: 74kc Mips Processor With 64 Kb I-cache [please Fill Out With Your Offered Specifications] [please Fill Out With Your Offered Accessories, If Any, Otherwise Write “n/a”] [please Fill Out With Your Offered Spare Parts, If Any, Otherwise Write “n/a”] [please Fill Out If Any, Otherwise Write “n/a”] [warranty Should Be For A Minimum Of One (1) Year From Delivery And Tesda’s Acceptance] Item No. Name Of The Equipment Preferred Technical Specifications Offered Technical Specifications Accessories (if Any) Spare Parts (if Any) Installation And Training Warranty Of Equipment/parts Memory: 16 Mb Flash, 128 Mb Ram I/o Ports • Rj45 For Gigabits Baset For Wan X 1, • Rj45 For Gigabits Baset For Lan X 4 • Usb 2.0 X 1 Warranty: 1 Year 8 Network Printer A3 Printer Type: Compact A3 Wi-fi All In-one Ink Tank Printer Print Resolution: 4800 X 1200dpi Print Speed: • 38ppm For Black & White And • 24ppm For Colour Paper Handling: • 250-sheet Front Tray For Standard Paper Sizes • Rear Media Feed For A3+ Size Adf: 35-sheet Capacity For A4 Size Display: Lcd Screen Functions: Print, Scan, Copy Ink System: Uses 101 Series Ink Bottles (b, Y,c,m) Warranty: 1 Year [please Fill Out With Your Offered Specifications] [please Fill Out With Your Offered Accessories, If Any, Otherwise Write “n/a”] [please Fill Out With Your Offered Spare Parts, If Any, Otherwise Write “n/a”] [please Fill Out If Any, Otherwise Write “n/a”] [warranty Should Be For A Minimum Of One (1) Year From Delivery And Tesda’s Acceptance] 9 Group Videoconfer Encing System With Mic And Speaker Set Camera Full-hd Video Camera • Resolution: 1080p30 (full Hd, 40 Frames Per Second) • Field Of View: 90° • Pan & Tilt: O Pan: 230° O Tilt: 130° • Codec: H.264 Uvc 1.5 With Scalable Video Coding (svc) • Tripod Mounting Thread: 1/4" – 20 [please Fill Out With Your Offered Specifications] [please Fill Out With Your Offered Accessories, If Any, Otherwise Write “n/a”] [please Fill Out With Your Offered Spare Parts, If Any, Otherwise Write “n/a”] [please Fill Out If Any, Otherwise Write “n/a”] [warranty Should Be For A Minimum Of One (1) Year From Delivery And Tesda’s Acceptance] Item No. Name Of The Equipment Preferred Technical Specifications Offered Technical Specifications Accessories (if Any) Spare Parts (if Any) Installation And Training Warranty Of Equipment/parts Speakerphone High-quality Duplex Speakerphone • Microphones O Array: 4 X Omnidirectional O Frequency Response: 100 Hz - 11 Khz O Sensitivity: -28 Db ±3 Db • Speakers O Frequency Response: 120 - 14 Khz O Sensitivity: 83 Dbspl ±3 Db At 1 W / 1 M O Max Output: 91 Dbspl O Distortion: <5% From 200 Hz Additional Features Wireless Remote Control Use With Industry Standard Platforms Warranty: 1 Year 10 Scanner Scan Weight: 50 Gsm To 209 Gsm Connectivity: Usb 2.0 Warranty: 1 Year [please Fill Out With Your Offered Specifications] [please Fill Out With Your Offered Accessories, If Any, Otherwise Write “n/a”] [please Fill Out With Your Offered Spare Parts, If Any, Otherwise Write “n/a”] [please Fill Out If Any, Otherwise Write “n/a”] [warranty Should Be For A Minimum Of One (1) Year From Delivery And Tesda’s Acceptance] 11 Monitor Monitor Specifications Panel Size: 27 Inches Aspect Ratio: 16:9 Backlight Type: Led Panel Type: Ips [please Fill Out With Your Offered Specifications] [please Fill Out With Your Offered Accessories, If Any, Otherwise [please Fill Out With Your Offered Spare Parts, If Any, Otherwise Write “n/a”] [please Fill Out If Any, Otherwise Write “n/a”] [warranty Should Be For A Minimum Of One (1) Year From Delivery And Tesda’s Acceptance] Item No. Name Of The Equipment Preferred Technical Specifications Offered Technical Specifications Accessories (if Any) Spare Parts (if Any) Installation And Training Warranty Of Equipment/parts Resolution: 1920x1080 (full Hd) Color Space (srgb): 99% Display Colors: 16.7m Refresh Rate (max): 180hz Flicker-free: Yes Color Temp. Selection: Yes (4 Modes) Low Blue Light: Yes Audio Feature Speaker: Yes (2wx2) I/o Ports Displayport: 1.2 X 1 Hdmi: (v2.0) X 2 Earphone Jack: Yes Warranty: 1 Year Write “n/a”] Form Of Quotation (microcomputers And Peripherals) To: Technical Education And Skills Development Authority Central Office, East Service Road, South Luzon Expressway, Fort Bonifacio, Western Bicutan, Taguig City We Offer To Execute The Supply And Delivery Of Microcomputers And Peripherals (g401-a) Accordance With The Contract Terms And Conditions And The Priced Supply And Delivery Schedule Accompanying This Quotation For The Contract Price Of _________________________[amount In Words And Numbers] (______________) [name Of Currency]_____________. We Propose To Complete The Delivery Of Goods Described In The Contract Within The Delivery Time Indicated In The Priced Supply And Delivery Schedule. This Quotation And Your Written Acceptance Will Constitute A Binding Contract Between Us. We Understand That You Are Not Bound To Accept The Lowest Or Any Quotation You Receive. We Hereby Confirm That This Quotation Complies With The Validity Of The Offer And Warranty Conditions Imposed By The Request For Quotation Document And The Contract Terms And Conditions, Respectively. We: (a) Are A National Of An Adb Member Country; (b) Have Not Been Associated With The Firm That Prepared The Design And Specifications Of The Contract That Is Subject Of This Request For Quotation; (c) Are Not Owned By The Purchaser; (d) Are Not Currently Sanctioned Or Temporarily Suspended By The Asian Development Bank; And (e) To The Best Of Our Knowledge, Is Not Prohibited From Being Contracted In Compliance With A Decision Of The United Nations Security Council. Name Of Supplier Authorized Signature Name Of Signatory Title Of Signatory Address Telephone Number Fax Number, If Any : ________________________________ : ________________________________ : ________________________________ : ________________________________ : ________________________________ : ________________________________ : ________________________________ Email Address (optional): ________________________________ Acceptance The Purchaser Accepts The Supplier’s Offer To Supply And Deliver The Goods. Attached Is The Contract With Accepted Contract Price For Supplier’s Signature To Be Submitted To The Purchaser Within 15 Days From Receipt. Please Provide A Performance Security For The Due Performance Of The Contract, Within 15 Days Of Receipt Of This Returned Form Of Quotation, In The Amount Equivalent To 10% Of The Contract Price. Name Of Purchaser Authorized Signature Name Of Signatory Title Of Signatory Date : ________________________________ : ________________________________ : ________________________________ : ________________________________ : ________________________________ Contract Name Of Country: Philippines Project Name: Loan 4268-phi: Supporting Innovation In Philippine Technical And Vocational Education And Training System (siptvets) Project Name Of Contract: Supply And Delivery Of Microcomputers And Peripherals Contract Number: G401-a This Contract Is Entered Into On __[date]__ Day Of _[month]_,_ [year], Between ____[name Of Purchaser]___________ (hereinafter Called “the Purchaser”) On The One Part, And ____[name Of Supplier]___________ (hereinafter Called “the Supplier”) On The Other Part. Whereas The Purchaser Has Requested For Quotation For ______________ [description Of Goods] To Be Supplied By Supplier In Accordance With The Contract, And Has Accepted The Quotation By The Supplier In The Amount Of ___[amount In Words]___ [amount In Figures] Hereinafter Called “the Contract Price”. The Purchaser And The Supplier Agree As Follows: 1. The Following Documents Shall Be Deemed To Form And Be Read And Construed As Part Of This Contract, Viz: A) Form Of Quotation, With Supply And Delivery Schedule; B) Contract Terms And Conditions; And C) Technical Specifications 2. Taking Into Account Payments To Be Made By The Purchaser To The Supplier As Provided Herein, The Supplier Hereby Enters Into This Contract With The Purchaser To Execute And Complete The Supply Of Goods Under The Contract And Remedy Any Defects Therein In Conformity With The Provisions Of This Contract And Its Terms And Conditions. 3. The Purchaser Agrees To Pay The Supplier, In Consideration Of The Supply And Delivery Of The Goods And The Remedying Of Defects Therein, The Contract Price As Indicated And Accepted In The Form Of Quotation, Under Payment Terms Stipulated In The Contract Terms And Conditions. In Witness Whereof The Parties Hereto Have Executed The Contract Under The Laws Of Republic Of The Philippines On The Date Indicated Above. Signature And Seal Of The Purchaser: For And On Behalf Of _____________________________ Name Of Authorized Representative Signature And Seal Of The Suppler: For And On Behalf Of _____________________________ Name Of Authorized Representative Contract Terms And Conditions Project Name: Supply And Delivery Of Microcomputers And Peripherals Purchaser: Technical Education And Skills Development Authority Package No.: G401-a 1. 2. 2.1 3. 3.1 4. 4.1 5. 5.1 Definitions (a) (b) (c) (d) (e) (f) (g) (h) (i) “contract” Means The Agreement Entered Into Between The Purchaser And The Supplier, Together With The Contract Documents Referred To Therein, Including All Attachments, Appendixes, And All Documents Incorporated By Reference Therein. “contract Documents” Means The Documents Listed In The Agreement, Including Any Amendments Thereto. “contract Price” Means The Price Payable To The Supplier As Specified In The Agreement, Subject To Such Additions And Adjustments Thereto Or Deductions Therefrom, As May Be Made Pursuant To The Contract. “delivery” Means The Transfer Of The Goods From The Supplier To The Purchaser In Accordance With The Terms And Conditions Set Forth In The Contract. “completion” Means The Fulfilment Of The Delivery And Any Related Service By The Supplier In Accordance With The Terms And Conditions Set Forth In The Contract. “goods” Means All Of The Commodities, Raw Material, Machinery And Equipment, And/or Other Materials That The Supplier Is Required To Supply To The Purchaser Under The Contract. “purchaser” Means The Entity Purchasing The Goods And Related Services, As Specified In The Scc. “supplier” Means The Natural Person, Private Or Government Entity, Or A Combination Of The Above, Whose Bid To Perform The Contract Has Been Accepted By The Purchaser And Is Named As Such In The Agreement, And Includes The Legal Successors Or Permitted Assigns Of The Supplier. “adb” Is The Asian Development Bank. Applicable Law The Contract Shall Be Interpreted In Accordance With The Laws Of The Purchaser's Country. Language All Communications And Documents Related To The Contract Shall Be In English. Assignment Any Assignment Of This Contract Or Of Any Rights Hereunder, In Whole Or In Part Without The Prior Written Consent Of The Purchaser Shall Be Void. Fraud And Corruption This Contract Shall Be Covered By The Provisions Of Adb’s Anticorruption Policy (1998, As Amended To Date) And Integrity Principles And Guidelines (2015, As Amended From Time To Time) That Requires Borrowers (including Beneficiaries Of Adb-financed Activity), As Well As Suppliers And Contractors Under Adb-financed Contracts, To Observe The Highest Standard Of Ethics During The Procurement And Execution Of Such Contracts. 6. 6.1 7. 7.1 8. 9. 9.1 10. 10.1 11. 11.1 12. 12.1 13. Fixed Contract Price The Prices Indicated In The Form Of Quotation Are Firm And Fixed And Not Subject To Any Adjustment During Contract Performance. Delivery Schedule The Delivery Should Be Completed As Per Schedule Indicated In The Supply And Delivery Schedule But Not Exceeding ______ Months From The Date Of Signing Of Contract. Required Technical Specifications (with Attachments As Necessary) (a) (b) (c) General Description Specific Details And Technical Standards Performance Parameters Supplier Confirms Compliance With Above Specifications. Delivery And Documents Upon Delivery, The Supplier Shall Provide The Following Documents To The Purchaser: (a) (b) (c) Copies Of The Supplier’s Invoice Showing Goods’ Description, Quantity, Unit Price, And Total Amount; Manufacturer's Or Supplier's Warranty Certificate; And Certificate Of Origin. If Goods Are Coming By Courier, Supplier Shall Also Provide Prior To Delivery, Copies Of Documents That Will Enable Purchaser To Receive The Goods. The Above Documents Shall Be Received By The Purchaser At Least One Week Before Arrival Of The Goods And, If Not Received, The Supplier Shall Be Responsible For Any Consequent Expenses. Taxes And Duties The Supplier Shall Be Entirely Responsible For All Taxes, Duties, License Fees, Etc., Incurred Until Delivery Of The Contracted Goods To The Purchaser. Payment Payment Of The Contract Price Shall Be Made In The Following Manner: (a) (b) 90% Within 30 Days From Receipt By The Purchaser Of The Delivered Goods On Site In Accordance With The Contract (or Whatever Is Appropriate For The Goods Being Procured) Including The Required Documents; And 10% Within 14 Days Upon Submission Of Supplier’s Claim Supported By The Acceptance Certificate Issued By The Purchaser. Warranty Goods Offered Should Be Covered By Manufacturer’s Warranty For At Least 12 Months From The Date Of Delivery To The Purchaser. Defects 13.1 All Defects Will Be Corrected By The Supplier Without Any Cost To The Purchaser Within 30 Day From The Date Of Notice By Purchaser. The Name And Address Of Service Facility Where The Defects Are To Be Corrected By The Supplier Within The Warranty Period Are: Facility _________________________ Address _________________________ _________________________ 14. 14.1 15. 15.1 16. 16.1 17. 17.1 18. 18.1 19. 19.1 Resolution Of Disputes The Purchaser And The Supplier Shall Make Every Effort To Resolve Amicably By Direct Informal Negotiation Any Disagreement Or Dispute Between Them Under Or In Connection With The Contract. In The Case Of An Unresolved Dispute Between The Purchaser And The Supplier, The Dispute Shall Be Settled In Accordance With The Provisions Of The ________ [arbitration Law Or Rules Of The Purchaser’s Country]. Failure To Perform The Purchaser May Cancel The Agreement If The Supplier Fails To Deliver The Goods, In Accordance With The Above Terms And Conditions, Despite A 14-day Notice Given By The Purchaser, Without Incurring Any Liability To The Supplier. Force Majeure The Supplier Shall Not Be Liable For Penalties Or Termination For Default If And To The Extent That Its Delay In Performance Or Other Failure To Perform Its Obligations Under The Contract Is The Result Of An Event Of Force Majeure. (a) (b) For Purposes Of This Clause, “force Majeure” Means An Event Beyond The Control Of The Supplier And Not Involving The Supplier’s Fault Or Negligence And Not Foreseeable. Such Events May Include, But Not Restricted To, Act Of Purchaser In Its Sovereign Capacity, Wars Or Revolutions, Fires, Floods, Epidemics, Quarantine Restrictions, And Freight Embargoes. If A Force Majeure Situation Arises, The Supplier Shall Promptly Notify The Purchaser In Writing Of Such Condition And The Cause Thereof. Unless Otherwise Directed By The Purchaser In Writing, The Supplier Shall Continue To Perform Its Obligations Under The Contract As Far As Is Reasonably Practical And Shall Seek All Reasonable Alternative Means For Performance Not Prevented By Force Majeure Event. Termination Due To Integrity Violation The Purchaser May Terminate This Contract, In Whole Or In Part, If The Supplier, In The Judgment Of The Purchaser Has Engaged In Integrity Violations In Accordance With Clause 5 [fraud And Corruption], In Competing For Or In Executing This Contract. Accounts And Records The Supplier Shall Keep Accurate And Systematic Accounts And Records In Respect Of The Delivered Goods In Such Form And Detail As Are Customary In The Industry, For A Period Of No Less Than 3 Years After The Expiration Or Termination Of This Contract. Suspension Of Adb Loan Or Credit In The Event That Adb Suspends The Loan Or Credit To The Purchaser, From Which Part Of The Payments To The Supplier Are Being Made, (a) The Purchaser Is Obligated To Notify The Supplier, With Copy To The Purchaser’s Representative, Of Such Suspension Within 7 Days Of Having Received Adb’s Suspension Notice. (b) If The Supplier Has Not Received Sums Due It Within The 28 Days For Payment Provided For In Clause 11 [payments], The Supplier May Immediately Issue A 14-day Termination Notice. Lot 2 – Supply And Delivery Of Furniture And Fixtures Lot 2 - Attachment 1 Supply And Delivery Schedule Of Furniture And Fixtures Instructions To Bidder: (1) Submit A Fully Priced Supply, Delivery And Price Schedule. All Rows And Columns Must Be Filled Out According To Your Offer. (2) If Your Proposed Delivery Schedule/(s) Exceed/(s) The Required Delivery Schedule/(s) Set Out Below, Please Provide Justification / Explanation. Item Description Unit Qty. Unit Price Total Price Delivery Schedule 1 Tv Stand With Mount Tv Size Compatibility: Fits Tvs With Screen Sizes Ranging From 32 To 85 Inches. Weight Capacity: Supports Tvs Weighing Up To 65 Kilograms Universal Compatibility: Designed For Large Lcd Led Flat-screen Tvs. Height Adjustment: Offers Multiple Hole Positions For Adjusting The Height Warranty: 1 Year Piece 2 Within Thirty (30) Working Days From The Date Of Signing Of The Contract 2 Smart Tv (touchscreen) Screen Size: 75 Inches (diagonal) Touch Screen: Yes Resolution: 4k (ultra Hd) Full Web Browser: Included Bezel: Thin Bezel Or Frameless Design Communication Ports: Includes Wifi, Ethernet, Usb, Hdmi, Displayport Warranty: 1 Year Piece 1 Within Thirty (30) Working Days From The Date Of Signing Of The Contract 3 Smart Tv (touchscreen) For Conference Room Screen Size: 65 Inches (diagonal) Touch Screen: Yes Resolution: 4k (ultra Hd) Full Web Browser: Included Bezel: Thin Bezel Or Frameless Design Communication Ports: Includes Wifi, Ethernet, Usb, Hdmi, Displayport Warranty: 1 Year Piece 1 Within Thirty (30) Working Days From The Date Of Signing Of The Contract 4 Office Desks Material: Metal And Wood Dimension: L1200xw600xh900 Warranty: 3 Months Piece 20 Within Thirty (30) Working Days From The Date Of Signing Of The Contract 5 Office Desks Material: Metal And Wood Dimension: L1400xw700xh900 Warranty: 3 Months Piece 17 Within Thirty (30) Working Days From The Date Of Signing Of The Contract 6 Pedestal Drawers: 3 Drawers Including 1 Central Lock, 1 Pen Tray, And 1 File Divider Piece 22 Within Thirty (30) Working Days From Item Description Unit Qty. Unit Price Total Price Delivery Schedule Mobility: 5 Swivel Castors For Easy Mobility Material: Powder-coated Steel Color: Neutral (i.e. Gray) Dimensions: 40 Cm (width) X 56.5 Cm (depth) X 65.5 Cm (height) Warranty: 3 Months The Date Of Signing Of The Contract 7 Office Chair (full Back Rest) Material: Mesh Back, Leatherette Seat, And Metal Base Color: Black Dimensions: L25″ X W19.25″ X H43″ (adjustable) Warranty: 3 Months Piece 37 Within Thirty (30) Working Days From The Date Of Signing Of The Contract 8 Executive Table Dimensions: 1800 Mm (length) X 800 Mm (width) Features: Electric Motorized Height Adjustable Desk Accessories: Netbox, Pole Bracket For Monitor, Modesty Panel Warranty: 1 Year Piece 1 Within Thirty (30) Working Days From The Date Of Signing Of The Contract 9 Executive Chair Back Material: Mesh With Pp (polypropylene) And Fiber Back Frame Lumbar Support: Height Adjustable Headrest: 2d (likely Adjustable In Height And Angle) Armrests: Height Adjustable With Soft Pu (polyurethane) Arm Pads Mechanism: Multi-functional With Back Reclining And One-position Locking Function Gas Lift: Bifma Class 3 Certified Base: 340mm Black Nylon Base Castors: Bifma Passed 50mm Pu Nylon Castors (likely Smooth And Durable For Various Floor Types) Warranty: 1 Year Piece 1 Within Thirty (30) Working Days From The Date Of Signing Of The Contract 10 Conference Table Seating Capacity: 10–12 Persons Tabletop Material: Mfc (melamine Faced Chipboard) Finish Or Laminated Top Legs: Metal Legs (likely Providing Stability And Durability) Warranty: 1 Year Piece 1 Within Thirty (30) Working Days From The Date Of Signing Of The Contract 11 Storage Cabinet Material: Steel Shelves: 5 Shelves (4 Adjustable) Doors: 2-swivel Door With Lock Dimension: H1800 X W855 X D390 Mm Color: Neutral (i.e. Textured Light Gray, Beige) Warranty: 1 Year Piece 7 Within Thirty (30) Working Days From The Date Of Signing Of The Contract 12 Sofa Set Type: Sofa Set Material: Fabric Color: Light Grey Size: 2 X 1-seater: L72 X D81 X H86cm 1 X 3-seater: L188 X D81 X H86cm Warranty: 1 Year Set 2 Within Thirty (30) Working Days From The Date Of Signing Of The Contract 13 Combi Blinds Size: Each Piece Measures Approximately 220 Cm (width) X 215 Cm (height) Piece 13 Within Thirty (30) Working Days From The Date Of Signing Item Description Unit Qty. Unit Price Total Price Delivery Schedule Total Area Coverage: 4.73 Sqm (assuming The Total Area Covered By All Blinds) Quantity: 13 Pieces (referring To The Number Of Blinds) Color: Beige Warranty: 1 Year Of The Contract 14 Combi Blinds Size: Each Piece Measures Approximately 100 Cm (width) X 200 Cm (height) Total Area Coverage: 1.20 Sqm (assuming The Total Area Covered By All Blinds) Quantity:2 Pieces (referring To The Number Of Blinds) Color: Beige Warranty: 1 Year Piece 2 Within Thirty (30) Working Days From The Date Of Signing Of The Contract Lot 2 - Attachment 2 Technical Specifications Of Furniture And Fixtures Instruction To Bidder: (1) All Rows And Columns Must Be Completely Filled Out According To Your Offer. Do Not Leave Any Row Or Column Blank. (2) If Your Offered Technical Specifications Is Different From The Preferred Technical Specifications, Please Provide Justification / Explanation. Item No. Name Of The Equipment Preferred Technical Specifications Offered Technical Specifications Accessories (if Any) Spare Parts (if Any) Installation And Training Warranty Of Equipment/parts 1 Tv Stand With Mount Tv Size Compatibility: Fits Tvs With Screen Sizes Ranging From 32 To 85 Inches. Weight Capacity: Supports Tvs Weighing Up To 65 Kilograms Universal Compatibility: Designed For Large Lcd Led Flat-screen Tvs. Height Adjustment: Offers Multiple Hole Positions For Adjusting The Height Warranty: 1 Year [please Fill Out With Your Offered Specifications] [please Fill Out With Your Offered Accessories, If Any, Otherwise Write “n/a”] [please Fill Out With Your Offered Spare Parts, If Any, Otherwise Write “n/a”] [please Fill Out If Any, Otherwise Write “n/a”] [warranty Should Be For A Minimum Of One (1) Year From Delivery And Tesda’s Acceptance] 2 Smart Tv (touchscreen ) Screen Size: 75 Inches (diagonal) Touch Screen: Yes Resolution: 4k (ultra Hd) Full Web Browser: Included Bezel: Thin Bezel Or Frameless Design Communication Ports: Includes Wifi, Ethernet, Usb, Hdmi, Displayport Warranty: 1 Year [please Fill Out With Your Offered Specifications] [please Fill Out With Your Offered Accessories, If Any, Otherwise Write “n/a”] [please Fill Out With Your Offered Spare Parts, If Any, Otherwise Write “n/a”] [please Fill Out If Any, Otherwise Write “n/a”] [warranty Should Be For A Minimum Of One (1) Year From Delivery And Tesda’s Acceptance] 3 Smart Tv (touchscreen ) For Screen Size: 65 Inches (diagonal) Touch Screen: Yes Resolution: 4k (ultra Hd) [please Fill Out With Your Offered Specifications] [please Fill Out With Your Offered Accessories, If [please Fill Out With Your Offered Spare Parts, If Any, [please Fill Out If Any, Otherwise Write “n/a”] [warranty Should Be For A Minimum Of One (1) Year From Delivery And Item No. Name Of The Equipment Preferred Technical Specifications Offered Technical Specifications Accessories (if Any) Spare Parts (if Any) Installation And Training Warranty Of Equipment/parts Conference Room Full Web Browser: Included Bezel: Thin Bezel Or Frameless Design Communication Ports: Includes Wifi, Ethernet, Usb, Hdmi, Displayport Warranty: 1 Year Any, Otherwise Write “n/a”] Otherwise Write “n/a”] Tesda’s Acceptance] 4 Office Desks Material: Metal And Wood Dimension: L1200xw600xh900 Warranty: 3 Months [please Fill Out With Your Offered Specifications] Na Na Na [warranty Should Be For A Minimum Of Three (3) Months From Delivery And Tesda’s Acceptance] 5 Office Desks Material: Metal And Wood Dimension: L1400xw700xh900 Warranty: 3 Months [please Fill Out With Your Offered Specifications] Na Na Na [warranty Should Be For A Minimum Of Three (3) Months From Delivery And Tesda’s Acceptance] 6 Pedestal Drawers: 3 Drawers Including 1 Central Lock, 1 Pen Tray, And 1 File Divider Mobility: 5 Swivel Castors For Easy Mobility Material: Powder-coated Steel Color: Neutral (i.e. Gray) Dimensions: 40 Cm (width) X 56.5 Cm (depth) X 65.5 Cm (height) Warranty: 3 Months [please Fill Out With Your Offered Specifications] Na Na Na [warranty Should Be For A Minimum Of Three (3) Months From Delivery And Tesda’s Acceptance] 7 Office Chair (full Back Rest) Material: Mesh Back, Leatherette Seat, And Metal Base Color: Black Dimensions: L25″ X W19.25″ X H43″ (adjustable) Warranty: 3 Months [please Fill Out With Your Offered Specifications] Na Na Na [warranty Should Be For A Minimum Of Three (3) Months From Delivery And Tesda’s Acceptance] 8 Executive Table Dimensions: 1800 Mm (length) X 800 Mm (width) Features: Electric Motorized Height Adjustable Desk Accessories: Netbox, Pole Bracket For Monitor, Modesty Panel Warranty: 1 Year [please Fill Out With Your Offered Specifications] Na Na Na [warranty Should Be For A Minimum Of One (1) Year From Delivery And Tesda’s Acceptance] Item No. Name Of The Equipment Preferred Technical Specifications Offered Technical Specifications Accessories (if Any) Spare Parts (if Any) Installation And Training Warranty Of Equipment/parts 9 Executive Chair Back Material: Mesh With Pp (polypropylene) And Fiber Back Frame Lumbar Support: Height Adjustable Headrest: 2d (likely Adjustable In Height And Angle) Armrests: Height Adjustable With Soft Pu (polyurethane) Arm Pads Mechanism: Multi-functional With Back Reclining And One-position Locking Function Gas Lift: Bifma Class 3 Certified Base: 340mm Black Nylon Base Castors: Bifma Passed 50mm Pu Nylon Castors (likely Smooth And Durable For Various Floor Types) Warranty: 1 Year [please Fill Out With Your Offered Specifications] Na Na Na [warranty Should Be For A Minimum Of One (1) Year From Delivery And Tesda’s Acceptance] 10 Conference Table Seating Capacity: 10–12 Persons Tabletop Material: Mfc (melamine Faced Chipboard) Finish Or Laminated Top Legs: Metal Legs (likely Providing Stability And Durability) Warranty: 1 Year [please Fill Out With Your Offered Specifications] Na Na Na [warranty Should Be For A Minimum Of One (1) Year From Delivery And Tesda’s Acceptance] 11 Storage Cabinet Material: Steel Shelves: 5 Shelves (4 Adjustable) Doors: 2-swivel Door With Lock Dimension: H1800 X W855 X D390 Mm Color: Neutral (i.e. Textured Light Gray, Beige) Warranty: 1 Year [please Fill Out With Your Offered Specifications] Na Na Na [warranty Should Be For A Minimum Of One (1) Year From Delivery And Tesda’s Acceptance] 12 Sofa Set Type: Sofa Set Material: Fabric Color: Light Grey Size: 2 X 1-seater: L72 X D81 X H86cm 1 X 3-seater: L188 X D81 X H86cm Warranty: 1 Year [please Fill Out With Your Offered Specifications] Na Na Na [warranty Should Be For A Minimum Of One (1) Year From Delivery And Tesda’s Acceptance] 13 Combi Size: Each Piece Measures [please Fill Out With [please Fill Out With [please Fill Out With [please Fill Out If [warranty Should Be For Item No. Name Of The Equipment Preferred Technical Specifications Offered Technical Specifications Accessories (if Any) Spare Parts (if Any) Installation And Training Warranty Of Equipment/parts Blinds Approximately 220 Cm (width) X 215 Cm (height) Total Area Coverage: 4.73 Sqm (assuming The Total Area Covered By All Blinds) Quantity: 13 Pieces (referring To The Number Of Blinds) Color: Beige Warranty: 3 Months Your Offered Specifications] Your Offered Accessories, If Any, Otherwise Write “n/a”] Your Offered Spare Parts, If Any, Otherwise Write “n/a”] Any, Otherwise Write “n/a”] A Minimum Of Three (3) Months From Delivery And Tesda’s Acceptance] 14 Combi Blinds Size: Each Piece Measures Approximately 100 Cm (width) X 200 Cm (height) Total Area Coverage: 1.20 Sqm (assuming The Total Area Covered By All Blinds) Quantity:2 Pieces (referring To The Number Of Blinds) Color: Beige Warranty: 3 Months [please Fill Out With Your Offered Specifications] [please Fill Out With Your Offered Accessories, If Any, Otherwise Write “n/a”] [please Fill Out With Your Offered Spare Parts, If Any, Otherwise Write “n/a”] [please Fill Out If Any, Otherwise Write “n/a”] [warranty Should Be For A Minimum Of Three (3) Months From Delivery And Tesda’s Acceptance] Form Of Quotation (furniture And Fixtures) To: Technical Education And Skills Development Authority Central Office, East Service Road, South Luzon Expressway, Fort Bonifacio, Western Bicutan, Taguig City We Offer To Execute The Supply And Delivery Of Furniture And Fixtures (g401-b) Accordance With The Contract Terms And Conditions And The Priced Supply And Delivery Schedule Accompanying This Quotation For The Contract Price Of _________________________[amount In Words And Numbers] (______________) [name Of Currency]_____________. We Propose To Complete The Delivery Of Goods Described In The Contract Within The Delivery Time Indicated In The Priced Supply And Delivery Schedule. This Quotation And Your Written Acceptance Will Constitute A Binding Contract Between Us. We Understand That You Are Not Bound To Accept The Lowest Or Any Quotation You Receive. We Hereby Confirm That This Quotation Complies With The Validity Of The Offer And Warranty Conditions Imposed By The Request For Quotation Document And The Contract Terms And Conditions, Respectively. We: (a) Are A National Of An Adb Member Country; (b) Have Not Been Associated With The Firm That Prepared The Design And Specifications Of The Contract That Is Subject Of This Request For Quotation; (c) Are Not Owned By The Purchaser; (d) Are Not Currently Sanctioned Or Temporarily Suspended By The Asian Development Bank; And (e) To The Best Of Our Knowledge, Is Not Prohibited From Being Contracted In Compliance With A Decision Of The United Nations Security Council. Name Of Supplier Authorized Signature Name Of Signatory Title Of Signatory Address Telephone Number Fax Number, If Any : ________________________________ : ________________________________ : ________________________________ : ________________________________ : ________________________________ : ________________________________ : ________________________________ Email Address (optional): ________________________________ Acceptance The Purchaser Accepts The Supplier’s Offer To Supply And Deliver The Goods. Attached Is The Contract With Accepted Contract Price For Supplier’s Signature To Be Submitted To The Purchaser Within 15 Days From Receipt. Please Provide A Performance Security For The Due Performance Of The Contract, Within 15 Days Of Receipt Of This Returned Form Of Quotation, In The Amount Equivalent To 10% Of The Contract Price. Name Of Purchaser Authorized Signature Name Of Signatory Title Of Signatory Date : ________________________________ : ________________________________ : ________________________________ : ________________________________ : ________________________________ Contract Name Of Country: Philippines Project Name: Loan 4268-phi: Supporting Innovation In Philippine Technical And Vocational Education And Training System (siptvets) Project Name Of Contract: Supply And Delivery Of Furniture And Fixtures Contract Number: G401-b This Contract Is Entered Into On __[date]__ Day Of _[month]_,_ [year], Between ____[name Of Purchaser]___________ (hereinafter Called “the Purchaser”) On The One Part, And ____[name Of Supplier]___________ (hereinafter Called “the Supplier”) On The Other Part. Whereas The Purchaser Has Requested For Quotation For ______________ [description Of Goods] To Be Supplied By Supplier In Accordance With The Contract, And Has Accepted The Quotation By The Supplier In The Amount Of ___[amount In Words]___ [amount In Figures] Hereinafter Called “the Contract Price”. The Purchaser And The Supplier Agree As Follows: 4. The Following Documents Shall Be Deemed To Form And Be Read And Construed As Part Of This Contract, Viz: D) Form Of Quotation, With Supply And Delivery Schedule; E) Contract Terms And Conditions; And F) Technical Specifications 5. Taking Into Account Payments To Be Made By The Purchaser To The Supplier As Provided Herein, The Supplier Hereby Enters Into This Contract With The Purchaser To Execute And Complete The Supply Of Goods Under The Contract And Remedy Any Defects Therein In Conformity With The Provisions Of This Contract And Its Terms And Conditions. 6. The Purchaser Agrees To Pay The Supplier, In Consideration Of The Supply And Delivery Of The Goods And The Remedying Of Defects Therein, The Contract Price As Indicated And Accepted In The Form Of Quotation, Under Payment Terms Stipulated In The Contract Terms And Conditions. In Witness Whereof The Parties Hereto Have Executed The Contract Under The Laws Of Republic Of The Philippines On The Date Indicated Above. Signature And Seal Of The Purchaser: For And On Behalf Of _____________________________ Name Of Authorized Representative Signature And Seal Of The Suppler: For And On Behalf Of _____________________________ Name Of Authorized Representative Contract Terms And Conditions Project Name: Supply And Delivery Of Furniture And Fixtures Purchaser: Technical Education And Skills Development Authority Package No.: G401-b 1. Definitions (j) (k) (l) “contract” Means The Agreement Entered Into Between The Purchaser And The Supplier, Together With The Contract Documents Referred To Therein, Including All Attachments, Appendixes, And All Documents Incorporated By Reference Therein. “contract Documents” Means The Documents Listed In The Agreement, Including Any Amendments Thereto. “contract Price” Means The Price Payable To The Supplier As Specified In The Agreement, Subject To Such Additions And Adjustments Thereto Or Deductions Therefrom, As May Be Made Pursuant To The Contract. (m) “delivery” Means The Transfer Of The Goods From The Supplier To The Purchaser In Accordance With The Terms And Conditions Set Forth In The Contract. (n) (o) (p) (q) (r) 2. “completion” Means The Fulfilment Of The Delivery And Any Related Service By The Supplier In Accordance With The Terms And Conditions Set Forth In The Contract. “goods” Means All Of The Commodities, Raw Material, Machinery And Equipment, And/or Other Materials That The Supplier Is Required To Supply To The Purchaser Under The Contract. “purchaser” Means The Entity Purchasing The Goods And Related Services, As Specified In The Scc. “supplier” Means The Natural Person, Private Or Government Entity, Or A Combination Of The Above, Whose Bid To Perform The Contract Has Been Accepted By The Purchaser And Is Named As Such In The Agreement, And Includes The Legal Successors Or Permitted Assigns Of The Supplier. “adb” Is The Asian Development Bank. Applicable Law 2.1 3. 3.2 4. 4.1 5. 5.1 The Contract Shall Be Interpreted In Accordance With The Laws Of The Purchaser's Country. Language All Communications And Documents Related To The Contract Shall Be In English. Assignment Any Assignment Of This Contract Or Of Any Rights Hereunder, In Whole Or In Part Without The Prior Written Consent Of The Purchaser Shall Be Void. Fraud And Corruption This Contract Shall Be Covered By The Provisions Of Adb’s Anticorruption Policy (1998, As Amended To Date) And Integrity Principles And Guidelines (2015, As Amended From Time To Time) That Requires Borrowers (including Beneficiaries Of Adb-financed Activity), As Well As Suppliers And Contractors Under Adb-financed Contracts, To Observe The Highest Standard Of Ethics During The Procurement And Execution Of Such Contracts. 6. 6.1 7. 7.1 8. 9. 9.1 10. 10.1 11. 11.1 12. 12.1 Fixed Contract Price The Prices Indicated In The Form Of Quotation Are Firm And Fixed And Not Subject To Any Adjustment During Contract Performance. Delivery Schedule The Delivery Should Be Completed As Per Schedule Indicated In The Supply And Delivery Schedule But Not Exceeding ______ Months From The Date Of Signing Of Contract. Required Technical Specifications (with Attachments As Necessary) (d) (e) (f) General Description Specific Details And Technical Standards Performance Parameters Supplier Confirms Compliance With Above Specifications. Delivery And Documents Upon Delivery, The Supplier Shall Provide The Following Documents To The Purchaser: (d) (e) (f) Copies Of The Supplier’s Invoice Showing Goods’ Description, Quantity, Unit Price, And Total Amount; Manufacturer's Or Supplier's Warranty Certificate; And Certificate Of Origin. If Goods Are Coming By Courier, Supplier Shall Also Provide Prior To Delivery, Copies Of Documents That Will Enable Purchaser To Receive The Goods. The Above Documents Shall Be Received By The Purchaser At Least One Week Before Arrival Of The Goods And, If Not Received, The Supplier Shall Be Responsible For Any Consequent Expenses. Taxes And Duties The Supplier Shall Be Entirely Responsible For All Taxes, Duties, License Fees, Etc., Incurred Until Delivery Of The Contracted Goods To The Purchaser. Payment Payment Of The Contract Price Shall Be Made In The Following Manner: (a) 90% Within 30 Days From Receipt By The Purchaser Of The Delivered Goods On Site In Accordance With The Contract (or Whatever Is Appropriate For The Goods Being Procured) Including The Required Documents; And (b) 10% Within 14 Days Upon Submission Of Supplier’s Claim Supported By The Acceptance Certificate Issued By The Purchaser. Warranty Goods Offered Should Be Covered By Manufacturer’s Warranty For At Least 12 Months From The Date Of Delivery To The Purchaser. 13. Defects 13.1 14. 14.1 15. 15.1 16. 16.1 17. 17.1 18. 18.1 19. 19.1 All Defects Will Be Corrected By The Supplier Without Any Cost To The Purchaser Within 30 Day From The Date Of Notice By Purchaser. The Name And Address Of Service Facility Where The Defects Are To Be Corrected By The Supplier Within The Warranty Period Are: Facility _________________________ Address _________________________ _________________________ Resolution Of Disputes The Purchaser And The Supplier Shall Make Every Effort To Resolve Amicably By Direct Informal Negotiation Any Disagreement Or Dispute Between Them Under Or In Connection With The Contract. In The Case Of An Unresolved Dispute Between The Purchaser And The Supplier, The Dispute Shall Be Settled In Accordance With The Provisions Of The ________ [arbitration Law Or Rules Of The Purchaser’s Country]. Failure To Perform The Purchaser May Cancel The Agreement If The Supplier Fails To Deliver The Goods, In Accordance With The Above Terms And Conditions, Despite A 14-day Notice Given By The Purchaser, Without Incurring Any Liability To The Supplier. Force Majeure The Supplier Shall Not Be Liable For Penalties Or Termination For Default If And To The Extent That Its Delay In Performance Or Other Failure To Perform Its Obligations Under The Contract Is The Result Of An Event Of Force Majeure. (c) (d) For Purposes Of This Clause, “force Majeure” Means An Event Beyond The Control Of The Supplier And Not Involving The Supplier’s Fault Or Negligence And Not Foreseeable. Such Events May Include, But Not Restricted To, Act Of Purchaser In Its Sovereign Capacity, Wars Or Revolutions, Fires, Floods, Epidemics, Quarantine Restrictions, And Freight Embargoes. If A Force Majeure Situation Arises, The Supplier Shall Promptly Notify The Purchaser In Writing Of Such Condition And The Cause Thereof. Unless Otherwise Directed By The Purchaser In Writing, The Supplier Shall Continue To Perform Its Obligations Under The Contract As Far As Is Reasonably Practical And Shall Seek All Reasonable Alternative Means For Performance Not Prevented By Force Majeure Event. Termination Due To Integrity Violation The Purchaser May Terminate This Contract, In Whole Or In Part, If The Supplier, In The Judgment Of The Purchaser Has Engaged In Integrity Violations In Accordance With Clause 5 [fraud And Corruption], In Competing For Or In Executing This Contract. Accounts And Records The Supplier Shall Keep Accurate And Systematic Accounts And Records In Respect Of The Delivered Goods In Such Form And Detail As Are Customary In The Industry, For A Period Of No Less Than 3 Years After The Expiration Or Termination Of This Contract. Suspension Of Adb Loan Or Credit In The Event That Adb Suspends The Loan Or Credit To The Purchaser, From Which Part Of The Payments To The Supplier Are Being Made, (c) The Purchaser Is Obligated To Notify The Supplier, With Copy To The Purchaser’s Representative, Of Such Suspension Within 7 Days Of Having Received Adb’s Suspension Notice. (d) If The Supplier Has Not Received Sums Due It Within The 28 Days For Payment Provided For In Clause 11 [payments], The Supplier May Immediately Issue A 14-day Termination Notice. Lot 3 – Supply And Delivery Of Households/office Equipment And Supplies Lot 3 - Attachment 1 Supply And Delivery Schedule Of Households/office Equipment And Supplies Instructions To Bidder: (1) Submit A Fully Priced Supply, Delivery And Price Schedule. All Rows And Columns Must Be Filled Out According To Your Offer. (2) If Your Proposed Delivery Schedule/(s) Exceed/(s) The Required Delivery Schedule/(s) Set Out Below, Please Provide Justification / Explanation. Item Description Unit Qty . Unit Price Total Price Delivery Schedule 1 Refrigerator Type: Top Freezer Direct Capacity: 9.4 Cu Ft Compressor: Cool Inverter Compressor Warranty: 10 Years Certification: Energy Star From Department Of Energy (dole) Warranty: 1 Year (general) Piece 1 Within Thirty (30) Working Days From The Date Of Signing Of The Contract 2 Tower Aircon Nominal Size: 3.0 Tr (tons Of Refrigeration) Refrigerant: R410a Cooling Capacity: 37,980 Kj/hr Energy Efficiency Ratio (eer): 9.2 Kj/w-hr Certification: Energy Star From Dole Warranty: • Parts And Services: 1 Year • Compressor Motor: 5 Years Note: Quotation Should Include Installation And Commissioning Piece 4 Within Thirty (30) Working Days From The Date Of Signing Of The Contract 3 Split Type Aircon Capacity: 2.5 Hp Type: Split Type (ceiling Suspended) Compressor Type: Inverter Certification: Energy Star From Dole Warranty: • Parts And Services: 1 Year • Compressor Motor: 5 Years Note: Quotation Should Include Installation And Commissioning Set 2 Within Thirty (30) Working Days From The Date Of Signing Of The Contract 4 Paper Shredder Intake Capacity: Shreds 30 Sheets Of Paper Or More Capability: Heavy-duty, Can Shred Set 1 Within Thirty (30) Working Days From The Date Of Signing Of Item Description Unit Qty . Unit Price Total Price Delivery Schedule Staples, Paper Clips, Credit Cards, And More Bin Capacity: Between 16 And 36 Gallons Warranty: 1 Year The Contract 5 Microwave Capacity: 30 Liters Control Panel: Glass Touch Door: Glass Warranty: • Parts And Services: 1 Year • Compressor Motor: 2 Years On Magnetron Set 1 Within Thirty (30) Working Days From The Date Of Signing Of The Contract 6 Water Dispenser Type: Freestanding, Bottom Loading Features: Hot Water, Normal Water, Cold Water Additional Features: Fast Cooling, Low Noise Operation Warranty: 1 Year Set 2 Within Thirty (30) Working Days From The Date Of Signing Of The Contract 7 Dinnerware And Silverwares Dinner Plates Size: 12" Diameter Material: Ceramic Color: White Quantity: 24 Pieces Glasses Type: Regular Drinking Glasses Color: Clear Quantity: 24 Pieces Cups And Saucers Set Cup Size: 90 Ml Material: Ceramic Color: White Quantity: 24 Sets (24 Cups + 24 Saucers) Silverware Set Pieces: Knives, Spoons, Forks Quantity: 24 Sets (each Set Includes 1 Knife, 1 Spoon, 1 Fork) Set 24 Within Thirty (30) Working Days From The Date Of Signing Of The Contract Lot 3 - Attachment 2 Technical Specifications Households/office Equipment And Supplies Instruction To Bidder: (1) All Rows And Columns Must Be Completely Filled Out According To Your Offer. Do Not Leave Any Row Or Column Blank. (2) If Your Offered Technical Specifications Are Different From The Preferred Technical Specifications, Please Provide Justification / Explanation. Item No. Name Of The Equipment Preferred Technical Specifications Offered Technical Specifications Accessories (if Any) Spare Parts (if Any) Installation And Training Warranty Of Equipment/parts 1 Refrigerator Type: Top Freezer Direct Capacity: 9.4 Cu Ft Compressor: Cool Inverter Compressor Warranty: 10 Years Certification: Energy Star From Department Of Energy (dole) Warranty: 1 Year (general) [please Fill Out With Your Offered Specifications] [please Fill Out With Your Offered Accessories, If Any, Otherwise Write “n/a”] [please Fill Out With Your Offered Spare Parts, If Any, Otherwise Write “n/a”] [please Fill Out If Any, Otherwise Write “n/a”] [warranty Should Be For A Minimum Of Ten (10) Years For Compressor, And Minimum Of One (1) Year For Parts And Services, From Delivery And Tesda’s Acceptance] 2 Tower Aircon Nominal Size: 3.0 Tr (tons Of Refrigeration) Refrigerant: R410a Cooling Capacity: 37,980 Kj/hr Energy Efficiency Ratio (eer): 9.2 Kj/w-hr Certification: Energy Star From Dole Warranty: • Parts And Services: 1 Year • Compressor Motor: 5 Years Note: Quotation Should Include Installation And Commissioning [please Fill Out With Your Offered Specifications] [please Fill Out With Your Offered Accessories, If Any, Otherwise Write “n/a”] [please Fill Out With Your Offered Spare Parts, If Any, Otherwise Write “n/a”] [please Fill Out If Any, Otherwise Write “n/a”] [warranty Should Be For A Minimum Of Five (5) Years For Compressor, And Minimum Of One (1) Year For Parts And Services, From Delivery And Tesda’s Acceptance] 3 Split Type Aircon Capacity: 2.5 Hp Type: Split Type (ceiling Suspended) Compressor Type: Inverter [please Fill Out With Your Offered Specifications] [please Fill Out With Your Offered Accessories, If Any, Otherwise [please Fill Out With Your Offered Spare Parts, If Any, Otherwise Write [please Fill Out If Any, Otherwise Write “n/a”] [warranty Should Be For A Minimum Of Five (5) Years For Compressor, And Minimum Of One Item No. Name Of The Equipment Preferred Technical Specifications Offered Technical Specifications Accessories (if Any) Spare Parts (if Any) Installation And Training Warranty Of Equipment/parts Certification: Energy Star From Dole Warranty: • Parts And Services: 1 Year • Compressor Motor: 5 Years Note: Quotation Should Include Installation And Commissioning Write “n/a”] “n/a”] (1) Year For Parts And Services, From Delivery And Tesda’s Acceptance] 4 Paper Shredder Intake Capacity: Shreds 30 Sheets Of Paper Or More Capability: Heavy-duty, Can Shred Staples, Paper Clips, Credit Cards, And More Bin Capacity: Between 16 And 36 Gallons Warranty: 1 Year [please Fill Out With Your Offered Specifications] N/a N/a N/a [warranty Should Be For A Minimum Of One (1) Year From Delivery And Tesda’s Acceptance] 5 Microwave Capacity: 30 Liters Control Panel: Glass Touch Door: Glass Warranty: • Parts And Services: 1 Year Compressor Motor: 2 Years On Magnetron [please Fill Out With Your Offered Specifications] N/a N/a N/a [warranty Should Be For A Minimum Of Two (2) Years For Magnetron, And Minimum Of One (1) Year For Parts And Services, From Delivery And Tesda’s Acceptance] 6 Water Dispenser Type: Freestanding, Bottom Loading Features: Hot Water, Normal Water, Cold Water Additional Features: Fast Cooling, Low Noise Operation Warranty: 1 Year [please Fill Out With Your Offered Specifications] N/a N/a N/a [warranty Should Be For A Minimum Of One (1) Year From Delivery And Tesda’s Acceptance] 7 Dinnerware And Silverwares Dinner Plates Size: 12" Diameter Material: Ceramic Color: White Quantity: 24 Pieces Glasses Type: Regular Drinking Glasses Color: Clear Quantity: 24 Pieces [please Fill Out With Your Offered Specifications] N/a N/a N/a N/a Item No. Name Of The Equipment Preferred Technical Specifications Offered Technical Specifications Accessories (if Any) Spare Parts (if Any) Installation And Training Warranty Of Equipment/parts Cups And Saucers Set Cup Size: 90 Ml Material: Ceramic Color: White Quantity: 24 Sets (24 Cups + 24 Saucers) Silverware Set Pieces: Knives, Spoons, Forks Quantity: 24 Sets (each Set Includes 1 Knife, 1 Spoon, 1 Fork) Form Of Quotation (households/office Equipment And Supplies) To: Technical Education And Skills Development Authority Central Office, East Service Road, South Luzon Expressway, Fort Bonifacio, Western Bicutan, Taguig City We Offer To Execute The Supply And Delivery Of Households/office Equipment And Supplies (g401-c) Accordance With The Contract Terms And Conditions And The Priced Supply And Delivery Schedule Accompanying This Quotation For The Contract Price Of _________________________[amount In Words And Numbers] (______________) [name Of Currency]_____________. We Propose To Complete The Delivery Of Goods Described In The Contract Within The Delivery Time Indicated In The Priced Supply And Delivery Schedule. This Quotation And Your Written Acceptance Will Constitute A Binding Contract Between Us. We Understand That You Are Not Bound To Accept The Lowest Or Any Quotation You Receive. We Hereby Confirm That This Quotation Complies With The Validity Of The Offer And Warranty Conditions Imposed By The Request For Quotation Document And The Contract Terms And Conditions, Respectively. We: (a) Are A National Of An Adb Member Country; (b) Have Not Been Associated With The Firm That Prepared The Design And Specifications Of The Contract That Is Subject Of This Request For Quotation; (c) Are Not Owned By The Purchaser; (d) Are Not Currently Sanctioned Or Temporarily Suspended By The Asian Development Bank; And (e) To The Best Of Our Knowledge, Is Not Prohibited From Being Contracted In Compliance With A Decision Of The United Nations Security Council. Name Of Supplier Authorized Signature Name Of Signatory Title Of Signatory Address Telephone Number Fax Number, If Any : ________________________________ : ________________________________ : ________________________________ : ________________________________ : ________________________________ : ________________________________ : ________________________________ Email Address (optional): ________________________________ Acceptance The Purchaser Accepts The Supplier’s Offer To Supply And Deliver The Goods. Attached Is The Contract With Accepted Contract Price For Supplier’s Signature To Be Submitted To The Purchaser Within 15 Days From Receipt. Please Provide A Performance Security For The Due Performance Of The Contract, Within 15 Days Of Receipt Of This Returned Form Of Quotation, In The Amount Equivalent To 10% Of The Contract Price. Name Of Purchaser Authorized Signature Name Of Signatory Title Of Signatory Date : ________________________________ : ________________________________ : ________________________________ : ________________________________ : ________________________________ Contract Name Of Country: Philippines Project Name: Loan 4268-phi: Supporting Innovation In Philippine Technical And Vocational Education And Training System (siptvets) Project Name Of Contract: Supply And Delivery Of Households/office Equipment And Supplies Contract Number: G401-c This Contract Is Entered Into On __[date]__ Day Of _[month]_,_ [year], Between ____[name Of Purchaser]___________ (hereinafter Called “the Purchaser”) On The One Part, And ____[name Of Supplier]___________ (hereinafter Called “the Supplier”) On The Other Part. Whereas The Purchaser Has Requested For Quotation For ______________ [description Of Goods] To Be Supplied By Supplier In Accordance With The Contract, And Has Accepted The Quotation By The Supplier In The Amount Of ___[amount In Words]___ [amount In Figures] Hereinafter Called “the Contract Price”. The Purchaser And The Supplier Agree As Follows: 7. The Following Documents Shall Be Deemed To Form And Be Read And Construed As Part Of This Contract, Viz: G) Form Of Quotation, With Supply And Delivery Schedule; H) Contract Terms And Conditions; And I) Technical Specifications 8. Taking Into Account Payments To Be Made By The Purchaser To The Supplier As Provided Herein, The Supplier Hereby Enters Into This Contract With The Purchaser To Execute And Complete The Supply Of Goods Under The Contract And Remedy Any Defects Therein In Conformity With The Provisions Of This Contract And Its Terms And Conditions. 9. The Purchaser Agrees To Pay The Supplier, In Consideration Of The Supply And Delivery Of The Goods And The Remedying Of Defects Therein, The Contract Price As Indicated And Accepted In The Form Of Quotation, Under Payment Terms Stipulated In The Contract Terms And Conditions. In Witness Whereof The Parties Hereto Have Executed The Contract Under The Laws Of Republic Of The Philippines On The Date Indicated Above. Signature And Seal Of The Purchaser: For And On Behalf Of _____________________________ Name Of Authorized Representative Signature And Seal Of The Suppler: For And On Behalf Of _____________________________ Name Of Authorized Representative Contract Terms And Conditions Project Name: Supply And Delivery Of Households/office Equipment And Supplies Purchaser: Technical Education And Skills Development Authority Package No.: G401-c 1. Definitions (s) (t) (u) (v) “contract” Means The Agreement Entered Into Between The Purchaser And The Supplier, Together With The Contract Documents Referred To Therein, Including All Attachments, Appendixes, And All Documents Incorporated By Reference Therein. “contract Documents” Means The Documents Listed In The Agreement, Including Any Amendments Thereto. “contract Price” Means The Price Payable To The Supplier As Specified In The Agreement, Subject To Such Additions And Adjustments Thereto Or Deductions Therefrom, As May Be Made Pursuant To The Contract. “delivery” Means The Transfer Of The Goods From The Supplier To The Purchaser In Accordance With The Terms And Conditions Set Forth In The Contract. (w) “completion” Means The Fulfilment Of The Delivery And Any Related Service By The Supplier In Accordance With The Terms And Conditions Set Forth In The Contract. (x) (y) (z) “goods” Means All Of The Commodities, Raw Material, Machinery And Equipment, And/or Other Materials That The Supplier Is Required To Supply To The Purchaser Under The Contract. “purchaser” Means The Entity Purchasing The Goods And Related Services, As Specified In The Scc. “supplier” Means The Natural Person, Private Or Government Entity, Or A Combination Of The Above, Whose Bid To Perform The Contract Has Been Accepted By The Purchaser And Is Named As Such In The Agreement, And Includes The Legal Successors Or Permitted Assigns Of The Supplier. (aa) “adb” Is The Asian Development Bank. 2. 2.1 3. 3.3 4. 4.1 5. 5.1 Applicable Law The Contract Shall Be Interpreted In Accordance With The Laws Of The Purchaser's Country. Language All Communications And Documents Related To The Contract Shall Be In English. Assignment Any Assignment Of This Contract Or Of Any Rights Hereunder, In Whole Or In Part Without The Prior Written Consent Of The Purchaser Shall Be Void. Fraud And Corruption This Contract Shall Be Covered By The Provisions Of Adb’s Anticorruption Policy (1998, As Amended To Date) And Integrity Principles And Guidelines (2015, As Amended From Time To Time) That Requires Borrowers (including Beneficiaries Of Adb-financed Activity), As Well As Suppliers And Contractors Under Adb-financed Contracts, To Observe The Highest Standard Of Ethics During The Procurement And Execution Of Such Contracts. 6. 6.1 7. 7.1 8. 9. 9.1 10. 10.1 11. 11.1 12. 12.1 Fixed Contract Price The Prices Indicated In The Form Of Quotation Are Firm And Fixed And Not Subject To Any Adjustment During Contract Performance. Delivery Schedule The Delivery Should Be Completed As Per Schedule Indicated In The Supply And Delivery Schedule But Not Exceeding ______ Months From The Date Of Signing Of Contract. Required Technical Specifications (with Attachments As Necessary) (g) (h) (i) General Description Specific Details And Technical Standards Performance Parameters Supplier Confirms Compliance With Above Specifications. Delivery And Documents Upon Delivery, The Supplier Shall Provide The Following Documents To The Purchaser: (g) (h) (i) Copies Of The Supplier’s Invoice Showing Goods’ Description, Quantity, Unit Price, And Total Amount; Manufacturer's Or Supplier's Warranty Certificate; And Certificate Of Origin. If Goods Are Coming By Courier, Supplier Shall Also Provide Prior To Delivery, Copies Of Documents That Will Enable Purchaser To Receive The Goods. The Above Documents Shall Be Received By The Purchaser At Least One Week Before Arrival Of The Goods And, If Not Received, The Supplier Shall Be Responsible For Any Consequent Expenses. Taxes And Duties The Supplier Shall Be Entirely Responsible For All Taxes, Duties, License Fees, Etc., Incurred Until Delivery Of The Contracted Goods To The Purchaser. Payment Payment Of The Contract Price Shall Be Made In The Following Manner: (a) 90% Within 30 Days From Receipt By The Purchaser Of The Delivered Goods On Site In Accordance With The Contract (or Whatever Is Appropriate For The Goods Being Procured) Including The Required Documents; And (b) 10% Within 14 Days Upon Submission Of Supplier’s Claim Supported By The Acceptance Certificate Issued By The Purchaser. Warranty Goods Offered Should Be Covered By Manufacturer’s Warranty For At Least 12 Months From The Date Of Delivery To The Purchaser. 13. Defects 13.1 14. 14.1 15. 15.1 16. 16.1 17. 17.1 18. 18.1 19. 19.1 All Defects Will Be Corrected By The Supplier Without Any Cost To The Purchaser Within 30 Day From The Date Of Notice By Purchaser. The Name And Address Of Service Facility Where The Defects Are To Be Corrected By The Supplier Within The Warranty Period Are: Facility _________________________ Address _________________________ _________________________ Resolution Of Disputes The Purchaser And The Supplier Shall Make Every Effort To Resolve Amicably By Direct Informal Negotiation Any Disagreement Or Dispute Between Them Under Or In Connection With The Contract. In The Case Of An Unresolved Dispute Between The Purchaser And The Supplier, The Dispute Shall Be Settled In Accordance With The Provisions Of The ________ [arbitration Law Or Rules Of The Purchaser’s Country]. Failure To Perform The Purchaser May Cancel The Agreement If The Supplier Fails To Deliver The Goods, In Accordance With The Above Terms And Conditions, Despite A 14-day Notice Given By The Purchaser, Without Incurring Any Liability To The Supplier. Force Majeure The Supplier Shall Not Be Liable For Penalties Or Termination For Default If And To The Extent That Its Delay In Performance Or Other Failure To Perform Its Obligations Under The Contract Is The Result Of An Event Of Force Majeure. (e) (f) For Purposes Of This Clause, “force Majeure” Means An Event Beyond The Control Of The Supplier And Not Involving The Supplier’s Fault Or Negligence And Not Foreseeable. Such Events May Include, But Not Restricted To, Act Of Purchaser In Its Sovereign Capacity, Wars Or Revolutions, Fires, Floods, Epidemics, Quarantine Restrictions, And Freight Embargoes. If A Force Majeure Situation Arises, The Supplier Shall Promptly Notify The Purchaser In Writing Of Such Condition And The Cause Thereof. Unless Otherwise Directed By The Purchaser In Writing, The Supplier Shall Continue To Perform Its Obligations Under The Contract As Far As Is Reasonably Practical And Shall Seek All Reasonable Alternative Means For Performance Not Prevented By Force Majeure Event. Termination Due To Integrity Violation The Purchaser May Terminate This Contract, In Whole Or In Part, If The Supplier, In The Judgment Of The Purchaser Has Engaged In Integrity Violations In Accordance With Clause 5 [fraud And Corruption], In Competing For Or In Executing This Contract. Accounts And Records The Supplier Shall Keep Accurate And Systematic Accounts And Records In Respect Of The Delivered Goods In Such Form And Detail As Are Customary In The Industry, For A Period Of No Less Than 3 Years After The Expiration Or Termination Of This Contract. Suspension Of Adb Loan Or Credit In The Event That Adb Suspends The Loan Or Credit To The Purchaser, From Which Part Of The Payments To The Supplier Are Being Made, (e) The Purchaser Is Obligated To Notify The Supplier, With Copy To The Purchaser’s Representative, Of Such Suspension Within 7 Days Of Having Received Adb’s Suspension Notice. (f) If The Supplier Has Not Received Sums Due It Within The 28 Days For Payment Provided For In Clause 11 [payments], The Supplier May Immediately Issue A 14-day Termination Notice.
Closing Date6 Aug 2024
Tender AmountRefer Documents
DEPT OF THE ARMY USA Tender
Aerospace and Defence
Corrigendum : Closing Date Modified
United States
Details: This Is A Combined Synopsis/solicitation For Commercial Items Prepared In Accordance With The Format In Federal Acquisition Regulation (far) Subpart 12.6, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; A Quote Is Being Requested And A Written Solicitation Will Not Be Issued.
this Solicitation Reference Fy24- 081524. Is Issued As A Request For Quote (rfq) And Incorporates The Provisions And Clauses Are Those In Effect Through Federal Acquisition Regulation; Federal Acquisition Circular (fac) 2024-02 Effective 22 December 2023.
this Procurement Is Being Solicited As A Brand Name (teal 2 Small Unmanned Aircraft Systems) Or Equivalent And A Total Small Business Set-aside. Naics Code Is 441227-06.
this Procurement Will Be Awarded Using The Simplified Acquisition Procedures (sap) Outlined In Far Part 13. Washington Army National Guard Intends Issue A Firm-fixed-price (ffp) Purchase Order On A Competitive Acquisition. Interested Sources Are Encouraged To Submit A Quote. Please See The Attached Purchase Description And Quote "all" Correctly. Review The Quantity Thorougly. Quote On "partial" Or Incorrect/unmatching Numbers Will Be Considered As "unsuccesful" Quote. All Information Shall Be Furnished At No Cost Or Obligation To The Government.
clin 0001 –uas System 2.4ghz Two-pack Drone
this Is Brand Name Or Equivalent Requirement.
offeror Must Quote Exact Specifications And Number Of Parts (please Review Thoroughly On The Number Of Parts)
offeror Must Quote “all Or Nothing”
offeror Must Indicate Shipping Cost If Needed
offeror Must Indicate Manufacture Warranty On All Parts, Programs, Applications, And Terms And Conditions Of Warranty.
offeror Must Provide Drawings/pictures Or Digital Brochures Of All Items Quoted With Prices
qty: 1 (ea)
salient Characteristics:
(1 Ea) Air Controller (tac)
(2 Ea) 2.4ghz With Hadron Payload With 16mp Eo And 640x512 R Ir
(3 Ea) Battery/charger Kits (each Kit Includes 1 Ea Charger & 2 Ea Batteries), Transport Cases, Tactical Case
(2 Ea) Field Repair Kit (tools, 2 Ea Rotor Arms, 1 Set Propellers, Micro Sd Card)
(1 Ea) Quick Start Guide 3km+ Range;low Latency For Command And Control And Video Transmission;10+ Hour Battery Life, Powered By Standard Battery For Interoperability;connect To Any Mavlink Compatible Aircraft With A Supported Radio
* Secure And Encrypted Communication High Endurance;long Range;modular Architecture;eo/ir Imaging;near-silent Propulsion;integrated Compute Platform;optimized Swap;scalable Design;section 848 Compliance With The Fy20 Ndaa
delivery
delivery Will Be Made To Bldg 81 Infantry Drive, Camp Murray, Wa 98430 30 Days After The Award Date.
evaluation Basis Of Award:
the Government Will Award An Order Resulting From This Solicitation To The Responsible Offeror Based On The Best Value. For The Purposes Of This Evaluation, Vendors Must Do The Followings:
(1) Meeting Technical Requirements Described In The Salient Characteristics And Preferred Characteristics.
(2) Offeror Shall Comply With Far 19.102(a)(1) And 13 Cfr § 121.406; As Defined In Below Note;
(3) Meeting The Delivery Date;
(4) Vendor Must Be Registered In Sam, At Time Of Proposal Receipt; And
(5) Compliance To The Terms And Conditions Of The Subject Combined Synopsis/solicitation.
*if You Have A Gsa Contract, Please Annotate That On Your Quote With Your Gsa Contract Number.
quote Submission Information:
quote Is Due, No Later Than 18 Sep 2024 @ 12:00 Pm (pst). Quote Shall Be Submitted Via E-mail Only As An Adobe Pdf Attachment To Jeanie Lee At Hyejin.lee11.civ@army.mil.
quote Shall Include The Solicitation Number, Name, Address, Cage Code, Uei, And Telephone Number Of The Offeror. Proprietary Data In The Responses Will Be Protected Where So Designated. For Information Or Questions Regarding This Rfq, Contact Jeanie Lee At Hyejin.lee11.civ@army.mil.
contract Provisions And Clauses (incorporated By Reference):
contract Clauses Incorporated By Reference
52.204-13 System For Award Management Maintenance
52.204-18 Commercial And Government Entity Code Maintenance
52.204-25 Prohibition Of Contracting For Certain Telecommunications And Video Surveillance Services Or Equipment
52.212-4 Contract Terms And Conditions—commercial Products And Commercial Services
52.232-39 Unenforceability Of Unauthorized Obligations
52.232-40 Providing Accelerated Payments To Small Business Subcontractors
52.233-1 Disputes
252.203-7000 Requirements Relating To Compensation Of Former Dod Officials
252.203-7002 Requirement To Inform Employees Of Whistleblower Rights
252.204-7003 Control Of Government Personnel Work Product
252.204-7015 Notice Of Authorized Disclosure Of Information For Litigation Support
252.204-7018 Prohibition On The Acquisition Of Covered Defense Telecommunications Equipment Or Services
252.204-7022 Expediting Contract Closeout
252.204-7024 Notice On The Use Of The Supplier Performance Risk System
252.211-7003 Item Unique Identification And Valuation
252.225-7048 Export-controlled Items
252.225-7056 Prohibition Regarding Business Operations With The Maduro Regime
252.225-7060 Prohibition On Certain Procurements From The Xinjiang Uyghur Autonomous Region
252.232-7003 Electronic Submission Of Payment Requests And Receiving Reports
252.232-7010 Levies On Contract Payments
252.243-7001 Pricing Of Contract Modifications
252.244-7000 Subcontracts For Commercial Products Or Commercial Services
252.246-7006 Warranty Tracking Of Serialized Items
252.246-7008 Sources Of Electronic Parts
contract Provisions Incorporated By Reference
52.203-18 Prohibition On Contracting With Entities That Require Certain Internal Confidentialityagreements Or Statements—representation
52.204-7 System For Award Management
52.204-16 Commercial And Government Entity Code Reporting
52.204-17 Ownership Or Control Of Offeror
52.204-20 Predecessor Of Offeror
52.204-22 Alternative Line Item Proposal
52.204-26 Covered Telecommunications Equipment Or Services—representation
52.209-2 Prohibition On Contracting With Inverted Domestic Corporations—representation
52.209-11 Representation By Corporations Regarding Delinquent Tax Liability Or A Felonyconviction Under Any Federal Law
52.212-1 Instructions To Offerors—commercial Products And Commercial Services
52.212-3 Offeror Representations And Certifications—commercial Products And Commercialservices--alternate I
52.222-22 Previous Contracts And Compliance Reports
52.222-25 Affirmative Action Compliance
52.223-22 Public Disclosure Of Greenhouse Gas Emissions And Reduction Goals—representation
52.225-25 Prohibition On Contracting With Entities Engaging In Certain Activities Or Transactionsrelating To Iran—representation And Certifications
252.203-7005 Representation Relating To Compensation Of Former Dod Officials
252.204-7016 Covered Defense Telecommunications Equipment Or Services--representation
252.204-7017 Prohibition On The Acquisition Of Covered Defense Telecommunications Equipment Orservices—representation
252.215-7013 Supplies And Services Provided By Nontraditional Defense Contractors
252.223-7008 Prohibition Of Hexavalent Chromium
252.225-7055 Representation Regarding Business Operations With The Maduro Regime
252.225-7059 Prohibition On Certain Procurements From The Xinjiang Uyghur Autonomous Region–representationadditional Contract Clauses And Provisions (incorporated By Full Text):
52.204-24 Representation Regarding Certain Telecommunications And Video Surveillance Services Orequipment (nov 2021) The Offeror Shall Not Complete The Representation At Paragraph (d)(1) Of This Provision If The Offeror Hasrepresented That It "does Not Provide Covered Telecommunications Equipment Or Services As A Part Of Its Offered Products Or Services To The Government In The Performance Of Any Contract, Subcontract, Or Other Contractual Instrument" In Paragraph (c)(1) In The Provision At 52.204-26, Covered Telecommunications Equipment Or Services—representation, Or In Paragraph (v)(2)(i) Of The Provision At 52.212-3, Offeror Representations And Certifications-commercial Products Or Commercial Services. The Offeror Shall Not Complete The Representation In Paragraph (d)(2) Of This Provision If The Offeror Hasrepresented That It "does Not Use Covered Telecommunications Equipment Or Services, Or Any Equipment, System, Or Service That Uses Covered Telecommunications Equipment Or Services" In Paragraph (c)(2) Of The Provision At 52.204-26, Or In Paragraph (v)(2)(ii) Of The Provision At 52.212-3
(a) Definitions. As Used In This Provision—
backhaul, Covered Telecommunications Equipment Or Services, Critical Technology, Interconnectionarrangements, Reasonable Inquiry, Roaming, And Substantial Or Essential Component Have The Meanings Provided In The Clause 52.204-25, Prohibition On Contracting For Certain Telecommunications And Video Surveillance Services Or Equipment.
(b) Prohibition. (1) Section 889(a)(1)(a) Of The John S. Mccain National Defense Authorization Act Forfiscal Year 2019 (pub. L. 115-232) Prohibits The Head Of An Executive Agency On Or After August 13, 2019, From Procuring Or Obtaining, Or Extending Or Renewing A Contract To Procure Or Obtain, Any Equipment, System, Or Service That Uses Covered Telecommunications Equipment Or Services As A Substantial Or Essential Component Of Any System, Or As Critical Technology As Part Of Any System. Nothing In The Prohibition Shall Be Construed To—
(i) Prohibit The Head Of An Executive Agency From Procuring With An Entity To Provide A Service Thatconnects To The Facilities Of A Third-party, Such As Backhaul, Roaming, Or Interconnection Arrangements; Or
(ii) Cover Telecommunications Equipment That Cannot Route Or Redirect User Data Traffic Or Cannot Permitvisibility Into Any User Data Or Packets That Such Equipment Transmits Or Otherwise Handles.
(2) Section 889(a)(1)(b) Of The John S. Mccain National Defense Authorization Act For Fiscal Year 2019(pub. L. 115-232) Prohibits The Head Of An Executive Agency On Or After August 13, 2020, From Entering Into A Contract Or Extending Or Renewing A Contract With An Entity That Uses Any Equipment, System, Or Service That Uses Covered Telecommunications Equipment Or Services As A Substantial Or Essential Component Of Any System, Or As Critical Technology As Part Of Any System. This Prohibition Applies To The Use Of Covered Telecommunications Equipment Or Services, Regardless Of Whether That Use Is In Performance Of Work Under A Federal Contract. Nothing In The Prohibition Shall Be Construed To—
(i) Prohibit The Head Of An Executive Agency From Procuring With An Entity To Provide A Service Thatconnects To The Facilities Of A Third-party, Such As Backhaul, Roaming, Or Interconnection Arrangements; Or
(ii) Cover Telecommunications Equipment That Cannot Route Or Redirect User Data Traffic Or Cannot Permitvisibility Into Any User Data Or Packets That Such Equipment Transmits Or Otherwise Handles.
(c) Procedures. The Offeror Shall Review The List Of Excluded Parties In The System For Award Management (sam) (https://www.sam.gov) For Entities Excluded From Receiving Federal Awards For"covered Telecommunications Equipment Or Services".
(d) Representation. The Offeror Represents That— (1) It □ Will, □ Will Not Provide Covered Telecommunications Equipment Or Services To The Government In The Performance Of Any Contract, Subcontract Or Other Contractual Instrument Resulting From This Solicitation. The Offeror Shall Provide The Additional Disclosure Information Required At Paragraph (e)(1) Of This Section If The Offeror Responds "will" In Paragraph (d)(1) Of This Section; And (2) After Conducting A Reasonable Inquiry, For Purposes Of This Representation, The Offeror Represents That— It □ Does, □ Does Not Use Covered Telecommunications Equipment Or Services, Or Use Any Equipment, System, Or Service That Uses Covered Telecommunications Equipment Or Services. The Offeror Shall Provide The Additional Disclosure Information Required At Paragraph (e)(2) Of This Section If The Offeror Responds "does" In Paragraph (d)(2) Of This Section. (e) Disclosures. (1) Disclosure For The Representation In Paragraph (d)(1) Of This Provision. If The Offeror Has Responded "will" In The Representation In Paragraph (d)(1) Of This Provision, The Offeror Shall Provide The Following Information As Part Of The Offer:
(i) For Covered Equipment—
(a) The Entity That Produced The Covered Telecommunications Equipment (include Entity Name, Unique Entity Identifier, Cage Code, And Whether The Entity Was The Original Equipment Manufacturer (oem) Or A Distributor, If Known);
(b) A Description Of All Covered Telecommunications Equipment Offered (include Brand; Model Number,such As Oem Number, Manufacturer Part Number, Or Wholesaler Number; And Item Description, As Applicable); And
(c) Explanation Of The Proposed Use Of Covered Telecommunications Equipment And Any Factors Relevant To Determining If Such Use Would Be Permissible Under The Prohibition In Paragraph (b)(1)of This Provision.
(ii) For Covered Services—
(a) If The Service Is Related To Item Maintenance: A Description Of All Covered Telecommunications Services Offered (include On The Item Being Maintained: Brand; Model Number, Such As Oemnumber, Manufacturer Part Number, Or Wholesaler Number; And Item Description, As Applicable); Or
(b) If Not Associated With Maintenance, The Product Service Code (psc) Of The Service Being Provided;and Explanation Of The Proposed Use Of Covered Telecommunications Services And Any Factors Relevant To Determining If Such Use Would Be Permissible Under The Prohibition In Paragraph (b)(1) Of This Provision.
(2) Disclosure For The Representation In Paragraph (d)(2) Of This Provision. If The Offeror Has Responded"does" In The Representation In Paragraph (d)(2) Of This Provision, The Offeror Shall Provide The Following Information As Part Of The Offer:
(i) For Covered Equipment—
(a) The Entity That Produced The Covered Telecommunications Equipment (include Entity Name, Uniqueentity Identifier, Cage Code, And Whether The Entity Was The Oem Or A Distributor, If Known);
(b) A Description Of All Covered Telecommunications Equipment Offered (include Brand; Model Number,such As Oem Number, Manufacturer Part Number, Or Wholesaler Number; And Item Description, As Applicable); And
(c) Explanation Of The Proposed Use Of Covered Telecommunications Equipment And Any Factors Relevant To Determining If Such Use Would Be Permissible Under The Prohibition In Paragraph (b)(2)of This Provision.
(ii) For Covered Services—
(a) If The Service Is Related To Item Maintenance: A Description Of All Covered Telecommunications Services Offered (include On The Item Being Maintained: Brand; Model Number, Such As Oemnumber, Manufacturer Part Number, Or Wholesaler Number; And Item Description, As Applicable); Or
(b) If Not Associated With Maintenance, The Psc Of The Service Being Provided; And Explanation Of Theproposed Use Of Covered Telecommunications Services And Any Factors Relevant To Determining If Such Use Would Be Permissible Under The Prohibition In Paragraph (b)(2) Of This Provision.
(end Of Provision)
52.212-5 Contract Terms And Conditions Required To Implement Statutes Or Executive Orders—commercial Products And Commercial Services. (jan 2022)
as Prescribed In 12.301(b)(4), Insert The Following Clause:
contract Terms And Conditions Required To Implement Statutes Or Executive Orders—commercial Products And Commercial Services (feb 2024)
(a) The Contractor Shall Comply With The Following Federal Acquisition Regulation (far) Clauses,which Are Incorporated In This Contract By Reference, To Implement Provisions Of Law Or Executive Ordersapplicable To Acquisitions Of Commercial Products And Commercial Services:
(1) 52.203-19, Prohibition On Requiring Certain Internal Confidentiality Agreements Orstatements (jan 2017) (section 743 Of Division E, Title Vii, Of The Consolidated And Further Continuingappropriations Act, 2015 (pub. L. 113-235) And Its Successor Provisions In Subsequent Appropriationsacts (and As Extended In Continuing Resolutions)).
(2) 52.204-23, Prohibition On Contracting For Hardware, Software, And Services Developed Or Provided By Kaspersky Lab Covered Entities (dec 2023) (section 1634 Of Pub. L. 115-91).
(3) 52.204-25, Prohibition On Contracting For Certain Telecommunications And Video Surveillance Services Or Equipment. (nov 2021) (section 889(a)(1)(a) Of Pub. L. 115-232).
(4) 52.209-10, Prohibition On Contracting With Inverted Domestic Corporations (nov 2015).
(5) 52.232-40, Providing Accelerated Payments To Small Business Subcontractors (mar 2023) ( 31 U.s.c. 3903 And 10 U.s.c. 3801).
(6) 52.233-3, Protest After Award (aug 1996) ( 31 U.s.c. 3553).
(7) 52.233-4, Applicable Law For Breach Of Contract Claim (oct 2004) (public Laws 108-77 And 108-78 ( 19 U.s.c. 3805 Note)).
(b) The Contractor Shall Comply With The Far Clauses In This Paragraph (b) That The Contractingofficer Has Indicated As Being Incorporated In This Contract By Reference To Implement Provisions Of Law Or Executive Orders Applicable To Acquisitions Of Commercial Products And Commercial Services:
__(1) 52.203-6, Restrictions On Subcontractor Sales To The Government (jun 2020), With Alternate I (nov 2021) ( 41 U.s.c. 4704 And 10 U.s.c. 4655).
__(2) 52.203-13, Contractor Code Of Business Ethics And Conduct (nov 2021) ( 41 U.s.c. 3509)).
__(3) 52.203-15, Whistleblower Protections Under The American Recovery And Reinvestment Actof 2009 (jun 2010) (section 1553 Of Pub. L. 111-5). (applies To Contracts Funded By The Americanrecovery And Reinvestment Act Of 2009.)
__(4) 52.203-17, Contractor Employee Whistleblower Rights (nov 2023) ( 41 U.s.c. 4712); Thisclause Does Not Apply To Contracts Of Dod, Nasa, The Coast Guard, Or Applicable Elements Of Theintelligence Community—see Far 3.900(a).
_x_(5) 52.204-10, Reporting Executive Compensation And First-tier Subcontract Awards (jun2020) (pub. L. 109-282) ( 31 U.s.c. 6101 Note).
__(6) [reserved].
__(7) 52.204-14, Service Contract Reporting Requirements (oct 2016) (pub. L. 111-117, Section743 Of Div. C).
__(8) 52.204-15, Service Contract Reporting Requirements For Indefinite-delivery Contracts (oct 2016) (pub. L. 111-117, Section 743 Of Div. C).
_x_(9) 52.204-27, Prohibition On A Bytedance Covered Application (jun 2023) (section 102 Ofdivision R Of Pub. L. 117-328).
__(10) 52.204-28, Federal Acquisition Supply Chain Security Act Orders—federal Supplyschedules, Governmentwide Acquisition Contracts, And Multi-agency Contracts. (dec 2023) ( Pub. L. 115–390, Title Ii).
__(11) (i) 52.204-30, Federal Acquisition Supply Chain Security Act Orders—prohibition. (dec2023) ( Pub. L. 115–390, Title Ii).
__(ii) Alternate I (dec 2023) Of 52.204–30.
_x_(12) 52.209-6, Protecting The Government’s Interest When Subcontracting With Contractorsdebarred, Suspended, Or Proposed For Debarment. (nov 2021) ( 31 U.s.c. 6101 Note).
__(13) 52.209-9, Updates Of Publicly Available Information Regarding Responsibility Matters (oct 2018) ( 41 U.s.c. 2313).
__(14) [reserved].
__(15) 52.219-3, Notice Of Hubzone Set-aside Or Sole-source Award (oct 2022) ( 15 U.s.c. 657a).
__(16) 52.219-4, Notice Of Price Evaluation Preference For Hubzone Small Business Concerns(oct 2022) (if The Offeror Elects To Waive The Preference, It Shall So Indicate In Its Offer) ( 15 U.s.c. 657a).
__(17) [reserved]
_x_(18) (i) 52.219-6, Notice Of Total Small Business Set-aside (nov 2020) ( 15 U.s.c. 644).
__(ii) Alternate I (mar 2020) Of 52.219-6.
__(19) (i) 52.219-7, Notice Of Partial Small Business Set-aside (nov 2020) ( 15 U.s.c. 644).
__(ii) Alternate I (mar 2020) Of 52.219-7.
__(20) 52.219-8, Utilization Of Small Business Concerns (feb 2024) ( 15 U.s.c. 637(d)(2) And(3)).
__(21) (i) 52.219-9, Small Business Subcontracting Plan (sep 2023) ( 15 U.s.c. 637(d)(4)).
__(ii) Alternate I (nov 2016) Of 52.219-9.
__(iii) Alternate Ii (nov 2016) Of 52.219-9.
__(iv) Alternate Iii (jun 2020) Of 52.219-9.
__(v) Alternate Iv (sep 2023) Of 52.219-9.
__(22) (i) 52.219-13, Notice Of Set-aside Of Orders (mar 2020) ( 15 U.s.c. 644(r)).
__(ii) Alternate I (mar 2020) Of 52.219-13.
__(23) 52.219-14, Limitations On Subcontracting (oct 2022) ( 15 U.s.c. 637s).
__(24) 52.219-16, Liquidated Damages—subcontracting Plan (sep 2021) ( 15 U.s.c. 637(d)(4)(f)(i)).
__(25) 52.219-27, Notice Of Set-aside For, Or Sole-source Award To, Service-disabled Veteranowned Small Business (sdvosb) Concerns Eligible Under The Sdvosb Program (feb 2024) ( 15 U.s.c. 657f).
_x_(26) (i) 52.219-28, Post Award Small Business Program Rerepresentation (feb 2024) ( 15 U.s.c. 632(a)(2)).
__(ii) Alternate I (mar 2020) Of 52.219-28.
__(27) 52.219-29, Notice Of Set-aside For, Or Sole-source Award To, Economically Disadvantaged Women-owned Small Business Concerns (oct 2022) ( 15 U.s.c. 637(m)).
__(28) 52.219-30, Notice Of Set-aside For, Or Sole-source Award To, Women-owned Small Business Concerns Eligible Under The Women-owned Small Business Program (oct 2022) ( 15 U.s.c. 637(m)).
__(29) 52.219-32, Orders Issued Directly Under Small Business Reserves (mar 2020) ( 15 U.s.c. 644(r)).
__(30) 52.219-33, Nonmanufacturer Rule (sep 2021) ( 15u.s.c. 637(a)(17)).
_x_(31) 52.222-3, Convict Labor (jun 2003) (e.o.11755).
_x_(32) 52.222-19, Child Labor-cooperation With Authorities And Remedies (feb 2024).
_x_(33) 52.222-21, Prohibition Of Segregated Facilities (apr 2015).
_x_(34) (i) 52.222-26, Equal Opportunity (sep 2016) (e.o.11246).
__(ii) Alternate I (feb 1999) Of 52.222-26.
__(35) (i) 52.222-35, Equal Opportunity For Veterans (jun 2020) ( 38 U.s.c. 4212).
__(ii) Alternate I (jul 2014) Of 52.222-35.
__(36) (i) 52.222-36, Equal Opportunity For Workers With Disabilities (jun 2020) ( 29 U.s.c. 793).
__(ii) Alternate I (jul 2014) Of 52.222-36.
__(37) 52.222-37, Employment Reports On Veterans (jun 2020) ( 38 U.s.c. 4212).
__(38) 52.222-40, Notification Of Employee Rights Under The National Labor Relations Act (dec 2010) (e.o. 13496).
_x_(39) (i) 52.222-50, Combating Trafficking In Persons (nov 2021) ( 22 U.s.c. Chapter 78 And E.o. 13627).
__(ii) Alternate I (mar 2015) Of 52.222-50 ( 22 U.s.c. Chapter 78 And E.o. 13627).
__(40) 52.222-54, Employment Eligibility Verification (may 2022) (executive Order 12989).
(not Applicable To The Acquisition Of Commercially Available Off-the-shelf Items Or Certain Other Types
of Commercial Products Or Commercial Services As Prescribed In Far 22.1803.)
__(41) (i) 52.223-9, Estimate Of Percentage Of Recovered Material Content For Epa–designated Items (may 2008) ( 42 U.s.c. 6962(c)(3)(a)(ii)). (not Applicable To The Acquisition Of Commercially Available Off-the-shelf Items.)
__(ii) Alternate I (may 2008) Of 52.223-9 ( 42 U.s.c. 6962(i)(2)(c)). (not Applicable To The Acquisition Of Commercially Available Off-the-shelf Items.)
__(42) 52.223-11, Ozone-depleting Substances And High Global Warming Potential Hydrofluorocarbons (jun 2016) (e.o. 13693).
__(43) 52.223-12, Maintenance, Service, Repair, Or Disposal Of Refrigeration Equipment And Air Conditioners (jun 2016) (e.o. 13693).
__(44) (i) 52.223-13, Acquisition Of Epeat®-registered Imaging Equipment (jun 2014) (e.o.s13423 And 13514).
__(ii) Alternate I (oct 2015) Of 52.223-13.
__(45) (i) 52.223-14, Acquisition Of Epeat®-registered Televisions (jun 2014) (e.o.s 13423and 13514).
__(ii) Alternate I (jun2014) Of 52.223-14.
__(46) 52.223-15, Energy Efficiency In Energyconsuming Products (may 2020) ( 42 U.s.c. 8259b).
__(47) (i) 52.223-16, Acquisition Of Epeat®-registered Personal Computer Products (oct 2015) (e.o.s 13423 And 13514).
__(ii) Alternate I (jun 2014) Of 52.223-16.
_x_(48) 52.223-18, Encouraging Contractor Policies To Ban Text Messaging While Driving (jun2020) (e.o. 13513).
__(49) 52.223-20, Aerosols (jun 2016) (e.o. 13693).
__(50) 52.223-21, Foams (jun2016) (e.o. 13693).
__(51) (i) 52.224-3 Privacy Training (jan 2017) (5 U.s.c. 552 A).
__(ii) Alternate I (jan 2017) Of 52.224-3.
__(52) (i) 52.225-1, Buy American-supplies (oct 2022) ( 41 U.s.c. Chapter 83).
__(ii) Alternate I (oct 2022) Of 52.225-1.
__(53) (i) 52.225-3, Buy American-free Trade Agreements-israeli Trade Act (nov 2023) ( 19u.s.c. 3301 Note, 19 U.s.c. 2112 Note, 19 U.s.c. 3805 Note, 19 U.s.c. 4001 Note, 19 U.s.c. Chapter 29 (sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, And 112-43.
__(ii) Alternate I [reserved].
__(iii) Alternate Ii (dec 2022) Of 52.225-3.
__(iv) Alternate Iii (feb 2024) Of 52.225-3.
__(v) Alternate Iv (oct 2022) Of 52.225-3.
__(54) 52.225-5, Trade Agreements (nov 2023) ( 19 U.s.c. 2501, Et Seq., 19 U.s.c. 3301 Note).
_x_(55) 52.225-13, Restrictions On Certain Foreign Purchases (feb 2021) (e.o.’s, Proclamations, And Statutes Administered By The Office Of Foreign Assets Control Of The Department Of Thetreasury).
__(56) 52.225-26, Contractors Performing Private Security Functions Outside The United States (oct 2016) (section 862, As Amended, Of The National Defense Authorization Act For Fiscal Year 2008; 10 U.s.c. Subtitle A, Part V, Subpart G Note).
__(57) 52.226-4, Notice Of Disaster Or Emergency Area Set-aside (nov 2007) ( 42 U.s.c. 5150).
__(58) 52.226-5, Restrictions On Subcontracting Outside Disaster Or Emergency Area (nov2007)( 42 U.s.c. 5150).
__(59) 52.229-12, Tax On Certain Foreign Procurements (feb 2021).
__(60) 52.232-29, Terms For Financing Of Purchases Of Commercial Products And Commercial Services (nov 2021) ( 41 U.s.c. 4505, 10 U.s.c. 3805).
__(61) 52.232-30, Installment Payments For Commercial Products And Commercial Services (nov 2021) ( 41 U.s.c. 4505, 10 U.s.c. 3805).
_x_(62) 52.232-33, Payment By Electronic Funds Transfer-system For Award Management (oct2018) ( 31 U.s.c. 3332).
__(63) 52.232-34, Payment By Electronic Funds Transfer-other Than System For Award Management (jul 2013) ( 31 U.s.c. 3332).
__(64) 52.232-36, Payment By Third Party (may 2014) ( 31 U.s.c. 3332).
__(65) 52.239-1, Privacy Or Security Safeguards (aug 1996) ( 5 U.s.c. 552a).
__(66) 52.242-5, Payments To Small Business Subcontractors (jan 2017) ( 15 U.s.c. 637(d)(13)).
__(67) (i) 52.247-64, Preference For Privately Owned U.s.-flag Commercial Vessels (nov 2021) ( 46 U.s.c. 55305 And 10 U.s.c. 2631).
__(ii) Alternate I (apr 2003) Of 52.247-64.
__(iii) Alternate Ii (nov 2021) Of 52.247-64.
(c) The Contractor Shall Comply With The Far Clauses In This Paragraph (c), Applicable To Commercialservices, That The Contracting Officer Has Indicated As Being Incorporated In This Contract By Reference To Implement Provisions Of Law Or Executive Orders Applicable To Acquisitions Of Commercialproducts And Commercial Services:
__(1) 52.222-41, Service Contract Labor Standards (aug 2018) ( 41 U.s.c. Chapter67).
__(2) 52.222-42, Statement Of Equivalent Rates For Federal Hires (may 2014) ( 29 U.s.c. 206 And 41 U.s.c. Chapter 67).
__(3) 52.222-43, Fair Labor Standards Act And Service Contract Labor Standards-price Adjustment (multiple Year And Option Contracts) (aug 2018) ( 29 U.s.c. 206 And 41 U.s.c. Chapter 67).
__(4) 52.222-44, Fair Labor Standards Act And Service Contract Labor Standards-price Adjustment (may 2014) ( 29u.s.c.206 And 41 U.s.c. Chapter 67).
__(5) 52.222-51, Exemption From Application Of The Service Contract Labor Standards Tocontracts For Maintenance, Calibration, Or Repair Of Certain Equipment-requirements (may 2014)( 41 U.s.c. Chapter 67).
__(6) 52.222-53, Exemption From Application Of The Service Contract Labor Standards To Contracts For Certain Services-requirements (may 2014) ( 41 U.s.c. Chapter 67).
__(7) 52.222-55, Minimum Wages For Contractor Workers Under Executive Order 14026 (jan2022).
__(8) 52.222-62, Paid Sick Leave Under Executive Order 13706 (jan 2022) (e.o. 13706).
__(9) 52.226-6, Promoting Excess Food Donation To Nonprofit Organizations (jun 2020) ( 42 U.s.c. 1792).
(d) Comptroller General Examination Of Record. The Contractor Shall Comply With The Provisions Ofthis Paragraph (d) If This Contract Was Awarded Using Other Than Sealed Bid, Is In Excess Of The Simplifiedacquisition Threshold, As Defined In Far 2.101, On The Date Of Award Of This Contract, And Does Not Contain The Clause At 52.215-2, Audit And Records-negotiation.
(1) The Comptroller General Of The United States, Or An Authorized Representative Of The Comptroller General, Shall Have Access To And Right To Examine Any Of The Contractor’s Directly Pertinent Records Involving Transactions Related To This Contract.
(2) The Contractor Shall Make Available At Its Offices At All Reasonable Times The Records, Materials, And Other Evidence For Examination, Audit, Or Reproduction, Until 3 Years After Final Payment Under This Contract Or For Any Shorter Period Specified In Far Subpart 4.7, Contractor Records Retention, Of The Other Clauses Of This Contract. If This Contract Is Completely Or Partially Terminated, The Records Relating To The Work Terminated Shall Be Made Available For 3 Years After Any Resulting Final Termination Settlement. Records Relating To Appeals Under The Disputes Clause Or To Litigation Or The Settlement Of Claims Arising Under Or Relating To This Contract Shall Be Made Available Until Such Appeals, Litigation, Or Claims Are Finally Resolved.
(3) As Used In This Clause, Records Include Books, Documents, Accounting Procedures And Practices, And Other Data, Regardless Of Type And Regardless Of Form. This Does Not Require The Contractor To Create Or Maintain Any Record That The Contractor Does Not Maintain In The Ordinary Course Of Business Or Pursuant To A Provision Of Law.
(e) (1) Notwithstanding The Requirements Of The Clauses In Paragraphs (a), (b), (c), And (d) Of This Clause, The Contractor Is Not Required To Flow Down Any Far Clause, Other Than Those In This Paragraph
(e)(1), In A Subcontract For Commercial Products Or Commercial Services. Unless Otherwise Indicatedbelow, The Extent Of The Flow Down Shall Be As Required By The Clause-(i) 52.203-13, Contractor Code Of Business Ethics And Conduct (nov 2021) ( 41 U.s.c. 3509).
(ii) 52.203-17, Contractor Employee Whistleblower Rights (nov 2023) ( 41 U.s.c. 4712).
(iii) 52.203-19, Prohibition On Requiring Certain Internal Confidentiality Agreements Or Statements (jan 2017) (section 743 Of Division E, Title Vii, Of The Consolidated And Further Continuing Appropriations Act, 2015 (pub. L. 113-235) And Its Successor Provisions In Subsequent Appropriations Acts (and As Extended In Continuing Resolutions)).
(iv) 52.204-23, Prohibition On Contracting For Hardware, Software, And Services Developed Or Provided By Kaspersky Lab Covered Entities (dec 2023) (section 1634 Of Pub. L. 115-91).
(v) 52.204-25, Prohibition On Contracting For Certain Telecommunications And Video Surveillance Services Or Equipment. (nov 2021) (section 889(a)(1)(a) Of Pub. L. 115-232).
(vi) 52.204-27, Prohibition On A Bytedance Covered Application (jun 2023) (section 102 Of Division R Of Pub. L. 117-328).
(vii) (a) 52.204–30, Federal Acquisition Supply Chain Security Act Orders—prohibition. (dec 2023) ( Pub. L. 115–390, Title Ii).
(b) Alternate I (dec 2023) Of 52.204–30.
(viii) 52.219-8, Utilization Of Small Business Concerns (feb 2024) ( 15 U.s.c. 637(d)(2) And
(3)), In All Subcontracts That Offer Further Subcontracting Opportunities. If The Subcontract (exceptsubcontracts To Small Business Concerns) Exceeds The Applicable Threshold Specified In Far 19.702(a) On The Date Of Subcontract Award, The Subcontractor Must Include 52.219-8 In Lower Tier Subcontractsthat Offer Subcontracting Opportunities.
(ix) 52.222-21, Prohibition Of Segregated Facilities (apr 2015).
(x) 52.222-26, Equal Opportunity (sep 2015) (e.o.11246).
(xi) 52.222-35, Equal Opportunity For Veterans (jun 2020) ( 38 U.s.c. 4212).
(xii) 52.222-36, Equal Opportunity For Workers With Disabilities (jun 2020) ( 29 U.s.c. 793).
(xiii) 52.222-37, Employment Reports On Veterans (jun 2020) ( 38 U.s.c. 4212).
(xiv) 52.222-40, Notification Of Employee Rights Under The National Labor Relations Act (dec 2010) (e.o. 13496). Flow Down Required In Accordance With Paragraph (f) Of Far Clause 52.222-40.
(xv) 52.222-41, Service Contract Labor Standards (aug 2018) ( 41 U.s.c. Chapter 67).
(xvi) (a) 52.222-50, Combating Trafficking In Persons (nov 2021) ( 22 U.s.c. Chapter 78 And E.o 13627). (b) Alternate I (mar 2015) Of 52.222-50 ( 22 U.s.c. Chapter 78 And E.o. 13627).
(xvii) 52.222-51, Exemption From Application Of The Service Contract Labor Standards To Contracts For Maintenance, Calibration, Or Repair Of Certain Equipment-requirements (may 2014) ( 41 U.s.c. Chapter 67).
(xviii) 52.222-53, Exemption From Application Of The Service Contract Labor Standards To Contracts For Certain Services-requirements (may 2014) ( 41 U.s.c. Chapter 67).
(xix) 52.222-54, Employment Eligibility Verification (may 2022) (e.o. 12989).
(xx) 52.222-55, Minimum Wages For Contractor Workers Under Executive Order 14026 (jan 2022).
(xxi) 52.222-62, Paid Sick Leave Under Executive Order 13706 (jan 2022) (e.o. 13706).
(xxii) (a) 52.224-3, Privacy Training (jan 2017) ( 5 U.s.c. 552a). (b) Alternate I (jan 2017) Of 52.224-3.
(xxiii) 52.225-26, Contractors Performing Private Security Functions Outside The United States (oct 2016) (section 862, As Amended, Of The National Defense Authorization Act For Fiscal Year 2008; 10 U.s.c. Subtitle A, Part V, Subpart G Note).
(xxiv) 52.226-6, Promoting Excess Food Donation To Nonprofit Organizations (jun 2020) ( 42 U.s.c. 1792). Flow Down Required In Accordance With Paragraph (e) Of Far Clause 52.226-6.
(xxv) 52.232-40, Providing Accelerated Payments To Small Business Subcontractors (mar 2023) ( 31 U.s.c. 3903 And 10 U.s.c. 3801). Flow Down Required In Accordance With Paragraph (c) Of 52.232-40.
(xxvi) 52.247-64, Preference For Privately Owned U.s.-flag Commercial Vessels (nov 2021) ( 46 U.s.c. 55305 And 10 U.s.c. 2631). Flow Down Required In Accordance With Paragraph (d) Of Far Clause 52.247-64.
(2) While Not Required, The Contractor May Include In Its Subcontracts For Commercial Products And Commercial Services A Minimal Number Of Additional Clauses Necessary To Satisfy Its Contractual Obligations.
(end Of Clause)
52.252-1 Solicitation Provisions Incorporated By Reference As Prescribed In 52.107 (a), Insert The Following Provision: Solicitation Provisions Incorporated By Reference (feb 1998)
this Solicitation Incorporates One Or More Solicitation Provisions By Reference, With The Same Force Andeffect As If They Were Given In Full Text. Upon Request, The Contracting Officer Will Make Their Full Textavailable. The Offeror Is Cautioned That The Listed Provisions May Include Blocks That Must Be Completedby The Offeror And Submitted With Its Quotation Or Offer. In Lieu Of Submitting The Full Text Of Thoseprovisions, The Offeror May Identify The Provision By Paragraph Identifier And Provide The Appropriateinformation With Its Quotation Or Offer. Also, The Full Text Of A Solicitation Provision May Be Accessedelectronically At This/these Address(es): Https://www.acquisition.gov/
(end Of Provision)
52.252-2 Clauses Incorporated By Reference (feb 1998) As Prescribed In 52.107(b), Insert The Following Clause: Clauses Incorporated By Reference (feb 1998)
this Contract Incorporates One Or More Clauses By Reference, With The Same Force And Effect As If They Were Given In Full Text. Upon Request, The Contracting Officer Will Make Their Full Text Available. Also, The Full Text Of A Clause May Be Accessed Electronically At This/these Address(es): Https://www.acquisition.gov/
(end Of Clause)
252.232-7006 Wide Area Workflow Payment Instructions (jan 2023)
as Prescribed In 232.7004 (b), Use The Following Clause: Wide Area Workflow Payment Instructions (jan 2023)
(a) Definitions. As Used In This Clause— “department Of Defense Activity Address Code (dodaac)” Is A Six Position Code That Uniquely Identifies A Unit, Activity, Or Organization.
“document Type” Means The Type Of Payment Request Or Receiving Report Available For Creation In Widearea Workflow (wawf).
“local Processing Office (lpo)” Is The Office Responsible For Payment Certification When Paymentcertification Is Done External To The Entitlement System.
“payment Request” And “receiving Report” Are Defined In The Clause At 252.232-7003, Electronicsubmission Of Payment Requests And Receiving Reports.
(b) Electronic Invoicing. The Wawf System Provides The Method To Electronically Process Vendorpayment Requests And Receiving Reports, As Authorized By Defense Federal Acquisition Regulationsupplement (dfars) 252.232-7003 , Electronic Submission Of Payment Requests And Receivingreports.
(c) Wawf Access. To Access Wawf, The Contractor Shall—
(1) Have A Designated Electronic Business Point Of Contact In The System For Award Managementat Https://www.sam.gov; And
(2) Be Registered To Use Wawf At Https://wawf.eb.mil/ Following The Step-by-step Procedures Forself-registration Available At This Web Site.
(d) Wawf Training. The Contractor Should Follow The Training Instructions Of The Wawf Web-basedtraining Course And Use The Practice Training Site Before Submitting Payment Requests Through Wawf.
both Can Be Accessed By Selecting The “web Based Training” Link On The Wawf Home Page Athttps://wawf.eb.mil/
(e) Wawf Methods Of Document Submission. Document Submissions May Be Via Web Entry,electronic Data Interchange, Or File Transfer Protocol.
(f) Wawf Payment Instructions. The Contractor Shall Use The Following Information When Submittingpayment Requests And Receiving Reports In Wawf For This Contract Or Task Or Delivery Order:
(1) Document Type. The Contractor Shall Submit Payment Requests Using The Following Documenttype(s):
(i) For Cost-type Line Items, Including Labor-hour Or Time-and-materials, Submit A Cost Voucher.
(ii) For Fixed Price Line Items—
(a) That Require Shipment Of A Deliverable, Submit The Invoice And Receiving Report Specified By The Contracting Officer.
invoice 2in1
b) For Services That Do Not Require Shipment Of A Deliverable, Submit Either The Invoice2in1, Which Meets The Requirements For The Invoice And Receiving Report, Or The Applicable Invoice Andreceiving Report, As Specified By The Contracting Officer.
n/a
(iii) For Customary Progress Payments Based On Costs Incurred, Submit A Progress Paymentrequest.
(iv) For Performance Based Payments, Submit A Performance Based Payment Request.
(v) For Commercial Financing, Submit A Commercial Financing Request.
(2) Fast Pay Requests Are Only Permitted When Federal Acquisition Regulation (far) 52.213-1 Isincluded In The Contract.
(3) Document Routing. The Contractor Shall Use The Information In The Routing Data Table Belowonly To Fill In Applicable Fields In Wawf When Creating Payment Requests And Receiving Reports In Thesystem.
routing Data Table*field Name In Wawf Data To Be Entered In Wawf
pay Official Dodaac Hq0670
issue By Dodaac W912k3
admin Dodaac** W912k3
inspect By Dodaac W912k3
ship To Code W56lpk
service Acceptor (dodaac) W56lpk
(4) Payment Request. The Contractor Shall Ensure A Payment Request Includes Documentationappropriate To The Type Of Payment Request In Accordance With The Payment Clause, Contract Financingclause, Or Federal Acquisition Regulation 52.216-7, Allowable Cost And Payment, As Applicable.
(5) Receiving Report. The Contractor Shall Ensure A Receiving Report Meets The Requirements Ofdfars Appendix F.
(g) Wawf Point Of Contact.
(1) The Contractor May Obtain Clarification Regarding Invoicing In Wawf From The Followingcontracting Activity’s Wawf Point Of Contact.
(2) Contact The Wawf Helpdesk At 866-618-5988, If Assistance Is Needed.
(end Of Clause)
Closing Date18 Sep 2024
Tender AmountRefer Documents
City Of Malabon Tender
Automobiles and Auto Parts
Corrigendum : Closing Date Modified
Philippines
Details: Description Invitation To Bid For Procurement Of Command Vehicle With Complete Supplies And Equipments For The Use Of Malabon City Fire Station 1. The City Government Of Malabon, Through The Trust Fund Intends To Apply The Sum Of Eight Million Five Hundred Seventy Five Thousand Two Hundred Three And 52/100 Pesos Only (p 8,575,203.52), Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Procurement Of Command Vehicle With Complete Supplies And Equipments For The Use Of Malabon City Fire Station. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The City Government Of Malabon Now Invites Bids From Eligible Bidders For The Procurement Of Command Vehicle With Complete Supplies And Equipments For The Use Of Malabon City Fire Station. Delivery Of Goods Is Required Within The Period Specified Under Section Vi. Schedule Of Requirements. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act 9184 (r.a. 9184), Otherwise Known As The “government Procurement Reform Act,” And Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To R.a. 5183 And Subject To Commonwealth Act 138. 4. Interested Bidders May Obtain Further Information From The Bids And Awards Committee Secretariat And Inspect The Bidding Documents At The Address Given Below From May 09-27, 2024; 8:00 A.m. To 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders From The Address Below And Upon Payment Of A Non-refundable Fee In The Amount Of Ten Thousand Pesos (p 10, 000. 00). 6. The City Government Of Malabon Will Hold A Pre-bid Conference On May 16, 2024 (thursday); 2:20 P.m. At The Bac Conference, 8th Floor Malabon City Hall, F. Sevilla Blvd., Malabon City. 7. Bids Must Be Delivered To The Address Below On Or Before May 28, 2024 (tuesday); 12:00 N.n. All Bids Must Be Accompanied By A Bid Securing Declaration Or Bid Security In Any Of The Acceptable Forms Set In The Amount Stated In Itb Clause 18. 8. Bid Opening Shall Be On May 28, 2024 (tuesday); 2:20 P.m. At The Bac Conference, 8th Floor Malabon City Hall, F. Sevilla Blvd., Malabon City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 9. The City Government Of Malabon Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. For Further Information Please Refer To: (originally Signed) Florlinda Ayroso Head- Bac Secretariat (originally Signed) Alexander T. Rosete, Ph.d. Chairperson - Bids And Awards Committee Purchase Of Brand New Customized Modern Puv (command Vehicle) • Puv Class 3, Front Facing Seat But Will Be Converted To Side-facing Seat • Engine: Cummins Isf 3.8 S4r154, Four-cylinder, In-line, Water Cooling, Turbo Charging, Cdri • Displacement: 3,800 Cc • Power Output: 154 Hp / 2,600 Rpm • Max. Torque (n.m/rpm): 500/1200 – 1900 • Transmission: 6 – Speed Manual Transmission • Seating Capacity: 29 Passenger • Payload Capacity: 4,200 Kg • Fuel Tank Capacity: 120l • Fuel Type: Diesel • Emission Compliance: Euro Iv • Overall Dimension: 6030mm X 2143mm X 2977mm • Service Brake: Air Brake Drum Type • Parking Brake: Air-cut Off Brake • Auxillary Brake: Engine Exhaust Brake • Warranty: 3 Years Or 100,000 Kms Whichever Comes First • Equipped With Abs (anti-lock Braking System), Brake Clearance Auto Adjusting Features: • Cctv Camera And Monitor, Dash Camera, Gps Tracker, Portable Wi-fi, Air- Conditioned Interior, Cushioned Leather Seats, Tv Entertainment Screen • Electric Sirens And Public Address System: Standard Fire Truck Siren Tones 100w, Amplifier And Siren Standard Fire Truck Siren Rotary Switch Momentary Push Button Override Control Public Address Override With Attached Microphone Volume Control Knob • Communication System: Base Radio Portable Radio And Charger Mobile Wifi/ Internet With Accessories • Set Of Tools: Hydraulic Jack Tire Wrench Flat And Philip Screw Set Of Fliers Adjustable Wrench Early Warning Device Spare Tire With Rim Installed 220 Ac Supply: Power Inverter With A Capacity Of 5kva And An Output Of 220v, 60hz Exterior Details: • With An Approved Decals, Logo And Color Ohoneycomb Design – Symbolizes Efficiency Ored And White Color – Red Symbolizes Fire Which Affects Response While White Affects Prevention Oblack Stripe – Divides The Symbolism Of The Red And White Color Omalabon City Fire Station – Written On Black Stripe – Means That The Malabon City Fire Station Functions In Both Prevention And Response To Emergencies Osix Hexagonal Logos – Represents The Operational Readiness As Well As The Standard Operating Procedures Of The Bfp And The Malabon City Fire Station Office In Response To Various Emergencies Represented By Each Hexagonal Logos • Front Upper Windshield With Medium Black Tint • A Compartment At The Lower Portion Of The Vehicle Capable Of Storing Rescue Equipment Such As Starlink Mobile Wifi, Rescue Saw, Cables, Ventilation Device, And Generator Set • Emergency Lights: Osurface Mount Led Lights With Red And White Flashing Led Ogrille Led Lights With Red And White Flashing Led Ohorizontally Attached Surface Mount Led Lights With 1-meter Distance Between Each Other • 4 – 6 M Telescopic Multi Stage Hydraulic Cylinder That Can Lower Horizontally To The Roof And With Installed One (1) 360 Degree Ptz Camera 32 Mp And Four (4) 300 Watts Led Flood Light For Command Light Tower • Installed Two (2) Roof Rack/carrier Beside The Telescopic Multi Stage Hydraulic Cylinder • Starlink Mobile Mount Rack Installed Along With Roof Rack • Installed An Aluminum Black Ladder In The Back Of The Vehicle • Small Helipad Station For Drones On The Roof • Installed Motorized Retractable Awning (5m X 3m) At The Roof Passenger Door Side Of The Vehicle • All Windows Are Installed With Black Tint Interior Details: • Side-facing Passenger Seats With Leather And Storage At The Bottom, Storage Can Be Accessed By Pulling Upward The Seats, Seats Are Located At The Front Side Portion Of The Passenger Area • Six Convenient Outlets And Ten Usb Ports Are Installed At Different Points Of The Vehicle With A Cover • Soundproof Divider With Sliding Door At The Back Portion Of The Passenger Area • Installed 2 Unit Of 27 Inches Ultragear Oled Monitor Qhd Mounted At The Back Portion Of The Vehicle With Hanging Shelves With Mount For Mini Computer Cpu And Printer • Four-seated Foldable Tables At The Rear Portion Of The Vehicle With Materials Of Particleboard, Melamine Foil, Polycarbonate/abs Plastic (black Color) With A Power Supply Outlet, Usb Ports And A Usb Cable Connected To The Monitor • Four Ergonomic Black Leather Fixed Chairs At The Rear Portion Of The Passenger Area • One Black Leather Seat With Storage And Foldable Table Parallel To The Wall At The Back Portion To Be Used By The Computer Operator • Shelves With Sliding Door On Upper Sides At The Rear Portion • Small Room For The Refrigerator Below The Monitor And On The Right Side • Master Switch For Lighting At The Driver-side • Available Switch For Lighting At The Back Portion • Base Radio At The Driver’s Seat • Switch For Telescopic Multi Stage Hydraulic Cylinder At The Driver’s Seat • Double Head Led Recessed Ceiling Downlight At The Passenger Side Service Warranty For 3 Years Gsis Insurance For 1 Year And Lto Registration 1 Unit Command Vehicle Equipment Technical Specifications 32 Mp 360° Panoramic & Ptz Camera Four 1/1.8" 8 Mp Progressive Scan Cmos For The Panoramic Channel And 2/3" 8 Mp Progressive Scan Cmos For The Ptz Channel • High-quality Imaging With 32 Mp Resolution • The Panoramic Channel Offers 180° Horizontal Field Of View And 85° Vertical Field View • Excellent Low-light Performance • 45× Optical Zoom And 16× Digital Zoom Of The Ptz Channel Provide Close-up Views Over Expansive Areas • Max. Panning Range Of 360° Endless And Max. Tilting Range Of -15° To 90° For The Ptz Channel • Expansive Night View With Up To 500 M Ir Distance • Supports Ar Multi-dimensional Arming Based On A Professional Platform • Vertical Pole Mount Installed In Multi Stage Telescopic Hydraulic Cylinder Aluminum Alloy, Steel, And Stainless Steel Platinum Gray With Software Installation Video Surveillance Expansion Package; Prerequisite: Video Surveillance Base Package; Warranty: None; Supported: ; Video Surveillance:1 Channel Video Management(real-time Viewing, Recording, Video Search); Additional: 1 Multi-lens Camera(e.g., Panoramic Cameras) Is Counted As 1 Channel, And The System Counts The Number Of Channels Based On Ip Address. Video Surveillance Base Package – Including All Fundamental Features Of Video Surveillance System, Providing The Prerequisite When Stand-alone Use Entrance & Exit, Uvss, Video Intercom, Facial Recognition Or Any Other Application Modules.supported:3 Years Free Sup, Main/auxiliary Storage, Alarm Management, Google Map, Evidence Management, Running On Virtual Machine, 100 Users Logged In Simultaneously, Heath Monitoring/history Maintenance Data, Client Operation (e.g. Visual Tracking, Custom Window Division),etc. Ar Module Expand Package; Prerequisite: Video Surveillance Base Package; Warranty:none; Supported:; -ar Module Support; -1 Scene Manageable, The Scene Has Contain A Set Management Of High-point Camera(s), Tags, Etc.; -1vss Channel Manageable, The Camera(s) Installed As Ar High-point Camera(s), Does Not Need To Pay Extra Vss Fee; 1 Unit Led Flood Lights For Command Light Tower All Electirc Design That Provides Endless Positions To Maximized Directional Lighting, Rotational Light, 300 Watts, To Be Installed In Multi Stage Telescopic Hydraulic Cylinder Together With Ptz Cctv Camera 4 Units Electric Sirens And Public Address System Standard Siren Tones (high&low/two Tones) • 100w, Amplifier And Siren Speaker • Rotary Switch • Momentary Push Button Override Control • Public Address Override With Attached Microphone • Volume Control Knob 1 Set Heavy Duty Roof Rack / Carrier Rack Size Adjustable From 43" X 39" X 6" To 64"x 39" X 6" All-heavy-duty Steel Construction Frame That Can Hold Up To 250 Lbs 3'x4' Cargo Net Works Perfectly For Hitch Cargo Carriers And Luggage Racks Black Powder-coated To Resist Rust Included Fairing Minimizes Wind Noise And Drag Ideal For Hauling Numerous Cargo Bags, Camping Equipment, Luggage, Furniture, And More 2 Sets Ergonomic Leather Fixed Chairs Executive Chair With Armrest, Adjustable Gaslift, Polyurethane Finish Back And Seat, And Aluminum Starbase • Color: Pu Black • Arm To Arm: 630 Mm • Total Depth From Wall: 710 Mm • Lowest Height: 1123 Mm • Highest Height: 1183 Mm • Seat Width: 530 Mm • Seat Depth: 540 Mm • Backrest Width: 505 Mm • Backrest Height From Seat: 693 Mm • Floor To Seat (minimum Height): 503 Mm • Base Width (diameter): 720 Mm • Base (center To End): 385 Mm • Base (center To Castor): 335 Mm • Base (center To End Of Base): 395 Mm 4 Units Inverter Electronic Inverter With A Capacity Of 5kva And An Output Of 220v, 60hz Five Convenience Outlets Were Installed At Different Points Of The Vehicle To Supply The Equipment 2 Units Multi Stage Telescopic Hydraulic Cylinder For Cctv And Flood Lights Specification: Hydraulics And Steel, Designed For Single-acting, Double Acting, 1-5 Stage Cylinder, Can Be Extended Up To 4-6 Meter 1 Unit Motorized Retractable Awning Full Cassette, 600 Gsm Polyester, Eggshell Aluminum Frame, Dark Gray Powdered Coated, Stainless Steel, Geared Type Arm Mechanic, Motorized With Manual, Inclusive Of Installation And Welding Works With Warranty 1 Set Mobile Satellite Internet Electronic Phased Array Antenna, Motorized Self Orienting, Ip54, Operating Temp Of -30c-50c, 100 Degree Field Of View With 50-75w Average Power Usage, With Accessories: Base, Router, Cable, And Mount 1 Set 27" Ultragear Oled Monitor Qhd With 240hz Refresh Rate 0.03ms Response Time Size (inch) 26.5size (cm) 67.32 Resolution 2560 X 1440panel Type Oled Aspect Ratio 16:9pixel Pitch 110.8 Ppi Brightness (min.) 160 Cd/m²brightness (typ.) 200 Cd/m² Color Gamut (min.) Dci-p3 90% (cie1976)color Gamut (typ.) Dci-p3 98% (cie1976) Color Depth (number Of Colors) 1.07bcontrast Ratio (typ.) 1500000:1 Response Time 0.03ms (gtg)refresh Rate (max.) [hz] 240 Viewing Angle (cr≥10) 178º (r/l), 178º (u/d)curvature No, With Wall Mount, Hdr 10 Yes Dolby Vision™ No Vesa Displayhdr™ No Hdr Effect Yes Mini-led Technology Nonano Ips™ Technology No Advanced True Wide Pol. Nocolor Calibrated In Factory No Hw Calibration No Auto Brightness No Flicker Safe Noreader Mode Yes Color Weakness Yes Super Resolution+ No Motion Blur Reduction Tech. Nonvidia G-sync™ G-sync Compatible Amd Freesync™ Freesync Premiumvrr Yes Black Stabilizer Black Stabilizerdynamic Action Sync Yes Crosshair Yes Fps Counter Yes Overclocking Nouser Defined Key Yes Auto Input Switch Yesrgb Led Lighting Hexagon Lighting Pbp No Pip No Smart Energy Saving Yes Camera No Mic No Others (feature) Hexagon Lighting, Vesa Dsc Tech. Dts Hp:x (4-pole H/p Out) 2 Unit Hl-t4000dw Ink Tank Printer Inkjet Printer:575 Mm X 477 Mm X 310 Mm:22/20 Ipm:plain, Inkjet, Glossy (cast/resin), Recycled:a4, Letter, Executive, B5a3, Ledger, B4, Legal, Folio, A5, B6, A6, Photo-4"x6", Indexcard-5"x8", Photo-3.5"x5", Photo-5"x7", C5 Envelope, Com-10 Envelope, Dl Envelope, Monarch Envelope, Mexico Legal, India Legal:up To 250 Sheets (80 Gsm) Up To 1200x4800 Dpi:a3: 291 Mm/297 Mm (with Border/borderless) Ledger: 273.4 Mm/279.4 Mm (with Border/borderless): Connectivity Usb 2.0:wireless Lan Ieee 802.11b/g/n (infrastructure) Ieee 802.11g/n (wi-fi Direct™):display 2.7” Tft Colour Lcd:memory Capacity 128 Mb:weight 16.1 Kg: Power Source Ac 220 V To 240 V 50/60hz:wireless Network Security Wep 64/128 Bit, Wpa-psk (tkip/aes), Wpa2-psk (aes) 1 Unit Computer With Mouse And Keyboard Model: Mac Mini 2 M2 15 Inch, 8‑core Cpu With 4 Performance Cores And 4 Efficiency Cores 10‑core Gpu 16‑core Neural Engine 100gb/s Memory Bandwidth, Hardware-accelerated H.264, Hevc, Prores, And Prores Raw Video Decode Engine Video Encode Engine Prores Encode And Decode Engine, 8gb Memory, 512gb Ssd, 2880 By 1864 Pixels, Liquid Retina Display, True Tone Color, Height: 1.15 Cm, Width: 34.04 Cm, Depth: 23.76 Cm, Weight: 1.51 Kg, 1080p Facetime Hd Camera Advanced Image Signal Processor With Computational Video, Six-speaker Sound System With Force-cancelling Woofers Wide Stereo Sound Support For Spatial Audio When Playing Music Or Video With Dolby Atmos On Built-in Speakers Spatial Audio With Dynamic Head Tracking When Using Airpods (3rd Generation), Airpods Pro, And Airpods Max, Three-mic Array With Directional Beamforming, 3.5mm Headphone Jack With Advanced Support For High-impedance Headphones, Backlit Magic Keyboard With:78 (u.s.) Or 79 (iso) Keys Including 12 Full-height Function Keys And 4 Arrow Keys In An Inverted-t Arrangement, Touch Id, Ambient Light Sensor, Force Touch Trackpad For Precise Cursor Control And Pressure-sensing Capabilities; Enables Force Clicks, Accelerators, Pressure-sensitive Drawing, And Multi-touch Gestures, Integrated 66.5-watt-hour Lithium-polymer Battery, 35w Dual Port Compact Power Adapter Fast-charge Capable With Available 70w Usb-c Power Adapter, With Compatible Mouse And Keyboard 1 Set Purchase Of Brand New K12fd Fire Rescue Saw 2-stroke Air-cooled Gasoline Engine, 6.5hp, 94cc, 5" Max Cutting Depth, 3.9m/s2 Front Handle Vibration, 4.2m/s2 Rear Handle Vibration, 104 Db (a) Sound Pressure At Operator's Ear, Guaranteed (lwa) 115 Db (a) Sound Power Level, Smartcarb Carburetor, Active Air Filtration, Decompression Relief Valve, Durastarter Starter Unit, Enclosed Transmission, Large D" Handle For Starting, 24lbs Excl Cutting Equipment. To Include: One (1) 14" X30t Carbide Tip Blade, One (1) 14" X30t Diamond Rescue Saw Blade, Chrome Saw Guard, Adjustable Shoulder Strap, Led Light Attached To Guard, Attached Wrench Holder 1 Set Purchase Of Brand New Multi-cut Fire Rescue Chainsaw Single-cylinder 2-cycle Engine With Loop Scavenging, 7.15hp, 87.9 Cc Displacement, Electronic Type One Piece Modular Ignition System, Ram-air Induction Air Filtration System, 20-inch Cutting Length, Carbide- Tipped Cutting Chain With Locking Key And Solid Bullet Raker Gauge, 9.6kg Dry Weight, 11-tooth Internal Sprocket Nose, 0.5mm- Thick Bar Body Steel Alloy, Sealed Sprocket Nose High Speed Steel. To Include: One (1) Spare 20-inch Bullet Chain, "scrench" Tool Holder And "scrench" Tool, Complete Tool Kit, Complete Manuals, Filter Oil, Bar And Chain Oil 1 Set Purchase Of Brand New Cordless Reciprocating Saw 18-volt, Brushless Dc Motor, Capacity: Wood-255mm, Mild Steel Pipe-130mm, Max Stroke: 3,000 Spm, Stroke Length-32mm, Li- Ion Batt. Made In Japan. To Include: 2 Units 3.0ah Battery (slide-style), 1 Unit Rapid Optimum Charger, 1 Pk Saw Blade (for Steel Plate, Iron Pipe), 1 Pk Saw Blade (for Wood, Plywood), Wrench, 1 Additional Spare Blade For Wood And Steel 2 Sets Purchase Of Brand New Avt Demolition Hammer With Bit 25.5-joule Impact Energy, 950-1900 Blows Per Minute, Voltage: 220-240v, 1500 Watts Input, 10.8-kg Net Weight, Made In Japan. To Include: Bull Point Chisel, Side Handle, Bit Grease, Cleaning Cloth, Carry Case 1 Set Purchase Of Brand New Heavy Duty Cable Reel Extension Wire Cable Length 30meters, Voltage 220v/50hz, 4 Sockets Outlet In 1, W/ Breaker (thermal Overload Protection), Royal Cord 2 Sets Purchase Of Brand New Avt Rotary Hammer With Bit 5.5j Impact Energy, 32 Mm Max In Concrete, 3-operation Modes, 90mm Max Core Diameter (tct), 1650-3300 Bpm Blows Per Minute, 850 Watts Input, 5.4kg Net Weight, Made In Japan. To Include: Quick Change Drill Chuck, Depth Rod, Side Handle, Bit Grease, Carry Case 1 Set Tactical Led Flashlight With Smart Charging Dock Battery: 1x18650 Rechargeable Li-ion / 2xcr123, Max Output: 800 Lumens, Premium Cree Xp-l Hi V3 Led, Crystal Coating Technology With "precision Digital Optics", Dual-switch Tailcap, Dedicated Charging Dock, 3 Selectable Modes, Strobe Ready Function,integrated Leds On Tailswitch, Anti-rolling Design, Ultra Clear Mineral Glass With Anti-scratch Coating, Caero Grade Aluminum Alloy With Haiii Milirtary Grade Hard-anodized Finish, Ipx-8 (2m Submersible), Impact Resistant 1.5m, White Beam Color, Length: 5.55in, Head: 1.25in, Weight: 108g, Warranty: At Least 5years To Include: Nl188dw (1), Holster, Smart Charging Dock, Titanium Steel Clip, Tactical Ring, Lanyard, O-ring, Car Charger Adapter 6 Sets Purchase Of Brand New Scba Refiller Mistral M6-em, Power: 2.2 Kw/ 220 - 230v/ 50-60 Hz, Max Pressure: 350 Bar, Fad: 103 Liters/min, Rpm: 1200/min, Dimensions (cm) 78x41x49, Weight: 53-73 Kg, With Electric Motor 2,2kw/3hp, Suitable For All Shipping, Diving And Fire-fighting Applications With Ce Certificate, Start/stop Switch, Micronic Air Filter, Pressure Maintaining & Non Return Valve For Extended Filtration, Condensate Separator After 2nd Stage, Combined Ba Filter Including Coalescing Pre-filter (0.5 Mg/m3 Oil Residual) And B.a. Cartridge (ac/ms + Hp Option), With The Supply Of Absolutely Clean Air Exceeding By Far The Requirements Of En12021, Safety Bleed Valve In Case Of Ba Cartridge Absence, Large Stainless Steel Intercoolers - Aftercooler, Safety Valves In All Stages, Kevlar Filling Hose (1.2m) With Stainless Steel Fittings And Din/int'l Connector, Electric Hourmeter, Vibration Hourmeter/service Timer (running Hours, Ba Filter/oil Service Hours), Final Stage Manometer, Manual Condensate Drains, Motor Thermal Overload Protection, Automatic Belt Tensioning System, Automatic Stop System, Automatic Start System, Automatic Condensate Drains With Manual Backups, Dual Pressure Filling Facility, Allowing 225/330 Bar Alternative Filling, Condensate Collecting Tank, 1.5m Air Inlet Hose With Particle Strainer, Special Voltage/frequency: 3 X 230 V/ 60 Hz - 110 V / 60 Hz; 1 Set Purchase Of Brand New Ventilation Devices With Ducting Type Positive Pressure Ventilation Fan, Cone Air Flow (caf) Drive/motor 16″ Models: Honda® Gx160 Gas 4.8 Hp Blade 16″ Diameter Assembly Made Up Of Airflex Fiberglass Reinforced Polyamide Blades Shroud Turbo 2000 Design, Tapered Aluminum W/ Durable Powder-coat Finish Wheels 16″ Models: 6″ Non-pneumatic W/ Steel Hubs Grille Continuous Circular-wound, External-weld Steel Wire With 8 Tie Points For Additional Safety Meets Ul & European Ce Safety Standards Frame Rugged, Lightweight, Square-steel Tubing With Powder-coat Finish Vibration Dampeners Steel-reinforced Rubber And Welded Steel Spring Feet Tilt Foot-operated Tilt Mechanism 16” Models: Four Position Tilt, +10°, +5°, 0°, -5° 1 Set Purchase Of Brand New Thermal Imaging Camera Thermal Sensor: 200x 150, Field Of View: 27x35, Video Recording: No, Image Capture: Yes, Protective Sensor Window: Yes, Temperature Range: -4f To 1,022f, Operating Temp (no Limit): -4f To 185f, Operating Temp (5 Min): 302f, Operating Temp (1min): 500f, Frame Rate: >25 Hz Fast Frame, Ip Rating: Ip 67 Waterproof, Impact Resistance: 2 Meter Drop On Concrete, Flashlight: 300 Lumed Led, Display: 2.8" Tft 320 X 240 Screen Resolution, Thermal Sensistivity: < 35 Mk With Sv1, Viewing Angle: Ergonomic 90 Degree Viewing Angle, Imaging Models: Fire (with Ti Basic & Ti Basic +) And Survey, Size Hxwxd: 5.1x3x1.8 Inches, Weight: 0.7 Lbs (325 Grams), Battery Life: 6 Hours In Thermal Only & 3.5 Hours With Flashligh On 2 Sets Purchase Of Anpen U2 Twin Pulley Anpen U2 Rescue Pulley-twin Height*width: 147*82mm 470g Features: Large Diameter Aluminum Sheave Mounted On Sealed Ball Bearings, There Are Excellent Sliding Efficiency Of The Force Design Of Its Attachment Points On The Symmetry, The Pulley Can Create Different Types Of Pulley System, Side Events Anywhere In The Rope Fast To Install, Weight Can Increase As The Pulley Or Establish A Technical Pull System. Application: Heavy Transport, Development Training, Fire Fighting And Rescue Operations In High-altitude Pulley. Load Capacity: 2 × 3kn × 2 = 12kn For: Rope Diameter ≤ 14 Mm Diameter Single Rope. 5 Pcs Purchase Of U1 Single Pulley Technical Single Pulleys U1 / Anpen Large Aluminum Alloy Single Pulley With Rotating Side Plates For Easy Placement Anywhere Along The Rope. Working Load: 4 Kn X 2 = 8 Kn, Breaking Load: 16 Kn X 2 = 32 Kn, Inner Sheave Diameter: 50 Mm, Max Rope Diameter: 15 Mm. Weight: 250 G, Ce Approved. 10 Pcs Purchase Of U23 Tandem Double Pulley For Ropes And Cable Anpen Tandem Double Pulley For Rope & Cables U23 A Double Version Pulley For Use In Technical Hauling System. Use With Ropes Less Than 13mm In Single Ropes Or Rope Cable. Strength: 16kn × 2=32kn. High*wide: 75*108mm; Weight: 255g; Ce Approved. 5 Pcs Purchase Of Kong Italy C Steel Carabiner (screw Gate) Carbon Steel Carabiner With Screw Sleeve. The X-large Is Designed To Offer A Wide Gate Opening And A High Tensile Strength. The Particular D Shape Prevents The Rotation Of The Carabiner And Allows To Distribute The Load Along The Major Axis. Equipped With Keylock System That Prevents Any Snagging On The Rope And In The Bolts. Fitted With Screw Sleeve, Easy To Open Even Wearing Gloves. Special Burnished Finishing That Allows A Greater Visibility Of The Laser Marking. High Quality Product Completely Developed And Produced In Italy. Tested Piece By Piece. Article: 411120zl1kk Certificate: Ce En 12275, Ce En 362/b, Uiaa Material: Carbon Steel Color: Black/polished/bronze Main Axis Load: 50kn Minor Axis Load: 13kn Open Gate Load: 20kn Shape: Asymmetric 15 Pcs Purchase Of Petzl Paw Rigging Plate Description For Easy Organization Of The Workstation And Setup Of Multi-anchor Systems: - 19 Mm Holes Allow The Locking Sleeves Of Most Carabiners To Pass Through, Enabling The Carabiner To Be Rotated - Hole Design Allows Ropes Or Slings To Be Threaded For Direct Connection. - Main Attachment Hole Accepts Up To Three Carabiners - The Odd Number Of Attachment Holes Enables The System To Be Centered And Balanced - Up To Three Users Can Be Connected At The Same Time Durability: - Made Of Forged Aluminum For An Excellent Strength-to-weight Ratio - Durable Markings, Thanks To The Recessed Area In The Center Of The Plate Available In Three Sizes And A Black Version Two Wide Auxiliary Attachment Holes (size L Only), Compatible With The Connexion Fixe And Connexion Vario Anchor Straps. Specifications Material(s): Aluminum Certification(s): Ce, Nfpa 2500 General Use, Ukca, Size M, Black 180g 45 Kn, 3 Years Guarantee 5 Pcs Purchase Of Ct Otto Rescue Steel Large-sized Figure Of Eight Descender, Hot Forged And Ideal For Belaying The Leader In A Dynamic Way And For Abseiling. Main Characteristics: Equipped With Two Braking Spurs That Allow Friction To Be Created During Descent; The Large Central Opening Allows You To Overcome Any Knots In The Ropes. Size: 165 X 153mm 40kn 724g. 10 Pcs Purchase Of Anpen Static Rope Black 12mmx200 Black Material: Hight Strength Nylon Weight Permeter(g/m): 95g/m Color: Black Dia: 12mm Strand: 32 Breaking Strength: 27kn Sheath Slippage: 0mm Static Elongation: 33.2% Shrinkage: 2.8% The Mass Of The Sheath: 69% The Mass Of The Core: 31% Knotability: 1.14 400 Meters Purchase Of Proteger Rope Rescue Gloves Features: Premium Synthetic Leather Palm And Fingertip Patches Kevlar® Stitching Neoprene Padded Knuckles Incredible Fingertip Dexterity Allows Knot Untying Without Removing Gloves Materials: Synthetic Leather Palm With Yellow Synthetic Leather Reinforcement, Eva Padded, Red Spandex Back With Black Neoprene Knuckles, Elastic Cuff With Velcro. 20 Pcs Purchase Of Petzl Aspir Adjustable Harness Adjustable Harness With Padded Waistbelt And Leg Loops The Aspir Is A Comfortable Harness That Offers Many Of The Advantages Of Our High-end Harnesses: Padded Waistbelt And Leg Loops, A Reinforced Tie-in Point And Equipment Loops. Its Low Bulk And Large Range Of Adjustability Also Make It Great For Mountaineering And Glacier Travel. A Great Harness Too For Via Ferrata And Adventure Parks. Description: *high-density Foam Leg Loops And Waistbelt With Soft Lining Are Comfortable With Minimal Bulk *adjustable Leg Loops Allow Size To Be Adjusted Depending On Comfort Desired Or Layers Of Clothing Worn, And Allow The Harness To Be Put On When Wearing Skis Or Crampons *the Doubleback Buckles Ensure Quick And Easy Adjustment. *single Dyneema®-reinforced Tie-in Point For Increased Durability *two Flexible Equipment Loops Stay Out Of The Way While Wearing A Pack *detachable Leg Loop Elastics *leg Loops And Waistbelt Are Color Coded To Facilitate Donning *sizes Are Color Coded For Easy Equipment Management For Guide Services And Group Programs 5 Pcs Purchase Of Steel Net Basket Stretcher 6d The Stretcher Is Made With An Eye On A Very Wide Range Of Special Emergency Situations, Such As In The Mountains, Air And Sea. It Is Sturdy And Flexible To Use, Its Quick Reliable Fittings Enable First-aid Person To Operate It Rapidly And Safely. With Its Special Sling Equipment, The Stretcher Is Ideal For Lifted And Transported By Helicopter. With Safety Belts And A Mattress. The Basket Stretcher Is Made Of Stainless Tube And Net, It Will Not Rust And Potentially Cause Additional Harm To The Patient. It Is Stronger Than Common Basket 1 Pc Purchase Of Esterpro/terrypro Rope (12mm X 200m) Material: Polyester Blend Chemical Resistance: Good Specific Gravity: 1.24 - Sinks Abrasion Resistance: Good Uv Resistance: Very Good Water Absorption: 0% Construction: 3 Strand Melting Point: +135 Degs C Color: White W/red Tracer Elongation:16-24% 2 Pcs Purchase Of Pmi Throw Bag Kt36020 Pmi Throw Bag W/10mmeconomy Poly Rope 23m Lightweight Nylon Throw Bags Stuffed With Pmi®’s Economy Throw Rope. Key Features: Lightweight Nylon Bag Pre-tied Loop Terminations Bag Includes A Flotation Disc Rigged And Ready For Use Mbs: 8 Kn (1798 Lbf) Weight: 1 Lbs 12.8 Oz (816 G) Diameter: 10 Mm (25/64") Length: 23 M (75 Ft) Length: 13.00" (33.0 Cm) Width: 6.00" (15.2 Cm) Height: 6.00" (15.2 Cm) Material: Polypropylene 3 Pcs Purchase Of C13 Manual Screwgate Carabiner Aluminum Anpen Manual Screwgate Carabiner / C13 Aluminum, Screwgate, Manual Locking Weight: 77g Gate Opening: 25mm Length*width: 112x70mm Diameter: 12mm Closed Gate Strength: 26kn Open Gate Strength: 8kn Minor Axis Strength: 8kn Pear-shaped Aluminum Screw Lock Safety Buckle Has A Large Opening, And Placed Within A Larger Space For The Lock. Seat Belt Or The Connection For Connecting The End Of The Rope, Can Buckle Into The Larger Diameter. Connection Points And More Equipment, Lack Of Equipment Can Be Used With The Safety Of The Italian Semi-buckle. Buckle Down To Do Or Emergency Protection. 15 Pcs Purchase Of Anpen B02 Rope Grab Rope Grab / B02 Rope Grab Device Weight: 95g Used 9-14mm Single Rope 5 Pcs Purchase Of Anpen A12-a Chest Ascender For Ropes Chest Ascender A12-a Length*width:121*76mm; Designed For Moving Along Fixed Ropes; Increased Chest Product Features: Above And Below Were Finally Saw Finally Saw The Hole In The Tool Wear Will Increase When The Devices Work Best In A Fixed Position Application: Hand-type Risers With Common Use In The Ropes, Can Effectively Increase The Time To Save Energy, And Increase Speed And Efficiency Increase. Used: 9-13 Mm Diameter Single Rope. 5 Pcs Purchase Of Ascender A11(right) Handled Ascender A11, Right Length*width:205*93mm; Ergonomic And Insulating Handle; Safe Locking Even On Iced Or Muddy Ropes. For Ropes From 8 To 13 Mm; Features: Right Hand Style Risers Comfortable Ergonomically Designed Handle, You Can Use A Single Rope Up Or Pull Heavy Traffic, You Can Fasten The Rope With One Hand. Scope: Rescue, Fire Fighting, Military, Mountain Climbing, Caving, And Ropes And Other Ropes Up Position. Used: 9-13 Mm Diameter Single Rope. 5 Pcs Purchase Of Grab Ascender A10(left) Handled Ascender A10 Left Anpen Length*width:205*93mm; Ergonomic And Insulating Handle; Safe Locking Even On Iced Or Muddy Ropes; For Ropes From 8 To 13 Mm. On The Left Hand Style Risers: Handles Ergonomically Designed To Provide Strong And Comfortable Grip, Using The Single Rope Up Or Pull Heavy Transport, To The Rope With One Hand Buckle For Any Section Of The Rope In The Freezing Or Daini Still Has A Strong Grip On The Rope Capacity. Scope: Rescue, Fire Fighting, Military, Mountain Climbing, Caving, And Ropes And Other Ropes Up Position In The 9-13 Mm Diameter Single Rope Use, Through The Ga494-2004 Standard Test Patterns. 5 Pcs Purchase Of Caiman Sar Safety Helmet Made Of High Impact Abs Plastic Wilcox Style Nvg Mount W/ Stability Straps -expanded Polypropylene (epp) Liner With Memory Foam Pads -arc Style Rail Kit Supports Widely Available Accessory Mounts -ventilation Holes For Long Wear Comfort - Size M For 54-57cm Head Scope: Rescue, Fire Fighting, Military, Mountain Climbing, Caving, And Ropes And Other Ropes Up Position. Used: 9-13 Mm Diameter Single Rope. 15 Pcs Purchase Of Tendon Prusik Cord 6mm X 100m Diameter (mm)6 Weight (g/m)23,2 Min. Strength (dan)1000 Ce 1019ano En 564yes 1 Pc Product Handling Training Three (3) Days Product Handling Training For Malabon City Fire Station Personnel Using All The Procured Equipments And Tools For Special Rescue Force And The Newly Acquired Command Vehicle Including Its Equipments And Accessories Used: 9-13 Mm Diameter Single Rope. Brand New Automatic Motorcycle (abs) 160cc Single Cylinder, 4-stroke, 4-valve, Liquid Cooled, Cvt, Dimension: 1970mm X 740mm X 1240mm, Wheelbase 1,330mm, Seatheight 790mm, Weight 151kg, Max Torque 14 Nm@5500 Rpm, Max Power Output 10 Kw @ 8,500 Rpm, The Fuel Tank Capacity Is 11 L Fuel Consumption 43km/l, 110/80 R14 Front And 130/70 R13 Rear Tubeless, Single Disk Front And Rear Brake, Abs Front, Front Suspension: Inverted Fork, Rear Suspension: Air Shock Absorber, With Tft Panel, Efi, Start-stop System, Led Lights, Usb Port, And Keyless; Fuel Injected; With Siren, Public Address And Led Blinkers, With 2 Pcs Side Utility Box, And Top Box (both Boxes Have Customized Stickers Bfp Malabon Logo) Equipped With Bracket And 5 Kg. Fire Extinguisher On Both Sides (dry Chem And Hcfc) And Free 1 Year Lto Registration Upon Delivery And Gsis Insurance 1 Unit Purchase Of Heavy Duty Collapsible Tent Heavy Duty Collapsible Tent Made With Maruyama Pgflex S4 And Galvanized Iron Pipes (6mx6m) 1 Pc Purchase Of 5.5 Kw Hybrid System Panel: Ae 550w Monocrystalline Panels (made In Germany) Inverter 5kw Deye Single Phase Hybrid/ On Grid/ Off Grid Inverter Battery Lv Topson/ Lv Fu 48v 100ah Mounting Kit: Railings Clamps (l-foot, End/mid Clamp, Splice Kit) Grounding Lugs, Grounding Washer, Pull Boxes Hdpe Conduit , Cable Tray, Distribution Box Protective Devices: Ac/dc Spd Ac/dc Breakers Wires And Cables: Pv Wires, Thhn Wires Mc4 Connector And Adaptor, Raceways Wifi Monitoring App With Limiter Wifi Monitoring System Ct Sensor With 15 Years Warranty For Panel, 5 Years Warranty For Inverter And Battery And 1 Year Warranty For Workmanship 1 Set
Closing Date27 May 2024
Tender AmountPHP 8.5 Million (USD 147.1 K)
VETERANS AFFAIRS, DEPARTMENT OF USA Tender
United States
Details: 1/24/2024
combined Synopsis Solicitation Northampton Vamc Boundary Survey
(i) This Is A Combined Synopsis/solicitation For Commercial Items Prepared In Accordance With The Format In Subpart 12.6, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Proposals Are Being Requested And A Written Solicitation Will Not Be Issued.
(ii) The Solicitation Number Is 36c24124q0795 And The Solicitation Is Issued As A Request For Quotation (rfq).
(iii) A Statement That The Solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular 2023-01.
(iv) This Requirement Is Being Issued As An Open Market, Sdvosb Set-aside. The Associated Naics 541330 And Small Business Size Standard Is $25.5 Million.
(v) The Government Intends To Award A Firm-fixed Price Award To Perform A Boundary Survey At The Northampton Vamc. Please See The Attached Performance Work Statement For Full Requirement Details. Please Complete The Price Schedule Below And Submit With The Quote Submission.
(vi) The Contractor Shall Provide All Resources Necessary To Perform The Boundary Survey Iaw The Attached (performance Work Statement). Please See The Attached Pws For Full Requirement Details.
(vii) The Place Of Performance Is Northampton, Massachusetts As Described Per The (performance Work Statement).
(viii) Provision At 52.212-1, Instructions To Offerors -- Commercial, Applies To This Acquisition In Addition To The Following Addenda S To The Provision: 52.252-1 Solicitation Provisions Incorporated By Reference (feb 1998); 52.204-7 System For Award Management (oct 2018); 52.204-16 Commercial And Government Entity Code Reporting (jul 2016); 52.217-5 Evaluation Of Options (jul 1990); 852.252-70 Solicitation Provisions Or Clauses Incorporated By Reference (jan 2008)
(ix) Provision At 52.212-2, Evaluation -- Commercial Items, Applies To This Requirement.
submission Of Quotes:
(1) Quotes Shall Be Received On Or Before The Date And Time Specified In Section (xv) Of This Solicitation. Note: Offers Received After The Due Date And Time Shall Not Be Considered.
(2) Offerors Shall Submit Their Quotes Electronically Via Email To Carissa.sarazin@va.gov.
(3) Quote Format: The Submission Should Be Clearly Indexed And Logically Assembled In Order Of The Evaluation Criteria Below. All Pages Of The Quote Shall Be Appropriately Numbered And Identified By The Complete Company Name, Date And Solicitation Number In The Header And/or Footer.
evaluation Process:
award Shall Be Made To The Best Value, As Determined To Be The Most Beneficial To The Government. Please Read Each Section Below Carefully For The Submittals And Information Required As Part Of The Evaluation. Failure To Provide The Requested Information Below Shall Be Considered Non-compliant And Your Quote Could Be Removed From The Evaluation Process.
offeror Quotes Shall Be Evaluated Under Far Part 13.106-2(b) -- Evaluation Of Quotations Or Offers. Therefore, The Government Is Not Obligated To Determine A Competitive Range, Conduct Discussions With All Contractors, Solicit Final Revised Quotes, And Use Other Techniques Associated With Far Part 15.
the Government Shall Award A Contract Resulting From This Solicitation To The Responsible Offeror Whose Offer Conforming To The Solicitation Shall Be Most Advantageous To The Government, Price And Other Factors Considered. The Following Factors Shall Be Used To Evaluate Offers:â
price (follow These Instructions):
offeror Shall Complete Attachment 1 - Price Schedule, With Offerors Proposed Contract Line Item Prices Inserted In Appropriate Spaces.â
past Performance:
offeror Shall Utilize Attachment 2 Past Performance Worksheet To Provide At Least One (1) But No More Than (3) References Of Work, Similar In Scope And Size With The Requirement Detailed In The (performance Work Statement). References May Be Checked By The Contracting Officer To Ensure Your Company Is Capable Of Performing The Statement Of Work.â The Government Also Reserves The Right To Obtain Information For Use In The Evaluation Of Past Performance From Any And All Sources.
questions:
questions Shall Be Submitted To The Contracting Officer In Writing Via E-mail. Oral Questions Are Not Acceptable Due To The Possibility Of Misunderstanding Or Misinterpretation. The Cut-off Date And Time For Receipt Of Questions Is 05-aug- 2024 By 4:00 Pm Est. Questions Received After This Date And Time May Not Be Answered. Questions Shall Be Answered In A Formal Amendment To The Solicitation So All Interested Parties Can See The Answers.
technical: The Offeror S Quote Shall Be Evaluated To Determine If The Organization Has The Experience And Capabilities To Provide The Requested Services Iaw The (performance Work Statement) In A Timely Efficient Manner.â
contractor Shall Demonstrate Their Corporate Experience And Approach To Meet All Requirements Stated In The (performance Work Statement).
contractor Shall Demonstrate That Their Technicians Meet The Qualification Standards Stated In The (performance Work Statement).
if You Are Planning To Sub-contract Some Or All Of This Work, Please Provide The Name And Address(s) Of All Subcontractor(s) (if Applicable) And A Description Of Their Planned Subcontracting Effort.
sam: Interested Parties Shall Be Registered In System For Award Management (sam) As Prescribed In Far Clause 52.232-33. Sam Information Can Be Obtained By Accessing The Internet At Www.sam.gov Or By Calling 1-866-606-8220. Interested Parties Not Registered In Sam In Sufficient Time To Meet The Va S Requirement Will Be Ineligible To Receive A Government Contract. This Determination Will Be At The Discretion Of The Contracting Officer.
vista: The Va Utilizes Vista To Issue A Purchase Order And Liquidate Invoices. Failure To Register In Vista May Result In Exclusion From The Issuance Of A Va Contract. This Determination Will Be At The Discretion Of The Contracting Officer. Interested Parties With No Prior Va Contracts Can Request A Form 10091 At Any Time.
(x) Please Include A Completed Copy Of The Provision At 52.212-3, Offeror Representations And Certifications -- Commercial Items, With Your Offer Via The Sam.gov Website Or A Written Copy.
(xi) Clause 52.212-4, Contract Terms And Conditions -- Commercial Items (oct 2018), Applies To This Acquisition In Addition To The Following Addenda S To The Clause: 52.204-16 Commercial And Government Entity Code Maintenance (jul 2016); 52.219-6 Notice Of Total Small Business Set-aside; 52.232-40 Providing Accelerated Payments To Small Business Subcontractors (dec 2013); 852.203-70 Commercial Advertising (may 2008); 852.232-72 Electronic Submission Of Payment Requests (nov 2018)
subcontracting Commitments - Monitoring And Compliance
this Solicitation Includes Vaar 852.215-70, Service-disabled Veteran-owned And Veteran-owned Small Business Evaluation Factors, And Vaar 852.215-71, Evaluation Factor Commitments. Accordingly, Any Contract Resulting From This Solicitation Will Include These Clauses. The Contractor Is Advised In Performing Contract Administration Functions, The Co May Use The Services Of A Support Contractor(s) To Assist In Assessing Contractor Compliance With The Subcontracting Commitments Incorporated Into The Information Protection And Non-disclosure And Disclosure Of Conflicts Of Interest Agreement To Ensure The Contractor's Business Records Or Other Proprietary Data Reviewed Or Obtained In The Course Of Assisting The Co In Assessing The Contractor For Compliance Are Protected To Ensure Information Or Data Is Not Improperly Disclosed Or Other Impropriety Occurs. Furthermore, If Va Determines Any Services The Support Contractor(s) Will Perform In Assessing Compliance Are Advisory And Assistance Services As Defined In Far 2.101, Definitions, The Support Contractor(s) Must Also Enter Into An Agreement With The Contractor To Protect Proprietary Information As Required By Far 9.505-4, Obtaining Access To Proprietary Information, Paragraph (b). The Contractor Is Required To Cooperate Fully And Make Available Any Records As May Be Required To Enable The Co To Assess The Contractor Compliance With The Subcontracting Commitments.
(xii) Clause At 52.212-5, Contract Terms And Conditions Required To Implement Statutes Or Executive Orders -- Commercial Items, Applies To This Acquisition And In Addition To The Following Far Clauses Cited, Which Are Also Applicable To The Acquisition: 52.204-10, 52.209-6, 52.219-6, 52.219-28, 52.222-3, 52.222-21, 52.222-26, 52.222-36, 52.222-50, 52.223-18, 52.232-33, 52.222-41, 52.222-43 (wage Determination Applicable (manchester 2015-4019 Rev 23 Posted On Beta.sam.gov)
(xiii) All Contract Requirement(s) And/or Terms And Conditions Are Stated Above.
(xiv) The Defense Priorities And Allocations System (dpas) And Assigned Rating Are Not Applicable To This Requirement.
(xv) Rfq Responses Are Due 12-aug- 2024 By 4:00 Pm Est. Rfq Responses Must Be Submitted Via Email To: Carissa.sarazin@va.gov. Hand Deliveries Shall Not Be Accepted.
(xvi) The Poc Of This Solicitation Is Carissa.sarazin@va.gov)
attachment 1
price Schedule
item Number
description Of Supplies/services
quantity
unit
unit Price
amount
0001
0002
0003
0004
alta/nsps Land Title Survey
install Survey Control Monument
install Survey Control Disk
topographic Survey
1.00
15.00
10.00
1
jb
ea
ea
jb
__________________
__________________
__________________
__________________
__________________
__________________
__________________
__________________
grand Total
__________________
attachment 2
past Performance Worksheet
1. Name Of Contracting Activity, Government Agency, Commercial Firm Or Other Organization:
2. Contracting Activity Address:
3. Contract Number:
4. Date Of Contract Award:
5. Beginning Date Of Contract:
6. Completion Date Of Contract:
7. Contract Value:
8. Type Of Contract:
9a. Technical Point Of Contact:
9b. Contracting Point Of Contact:
name:
name:
title:
title:
address:
address:
telephone:
telephone:
email:
email:
10. Place Of Performance:
11. Description Of Work (use A Continuation Sheet If Necessary):
12. List Any Commendations Or Awards Received:
13. List Of Major Subcontractors:
statement Of Work
performance Work Statement Department Of Veterans Affairs (va) Medical Center, Leeds Ma
boundary Survey Of The Edward P. Boland Campus
general
the Va Central Western Mass. Edward P Boland Campus In Leeds, Ma Requires Survey Confirmation Of The Property Owned By The Va. The Original Tract Was Approximately 280 Acres And Is Now Approximately 105. The Va Has Records Of Agreements/conveyances That May Or May Not Have Occurred/been Recorded Over The And Is Looking For Confirmation Of The Property Owned By The Va Through A Alta/nsps Land Title Survey.
the Edward P. Boland Campus Also Has A Lot Of Construction Going On And Needs A Survey Control Network Installed To Standardized And Coordinate Construction And Records Throughout The Campus. A Traverse Through The Control Points Installed Is Required And Shall Be Submitted With The Control Point Coordinates. The Control Network Shall Use The Massachusetts State Plane Coordinate System.
place Of Performance:
421 N. Main St, Leeds Ma
project Scope Of Work
item 1 Conduct An Alta/nsps Land Title Survey 1 Lump Sum
see Attachment 1 Alta/nsps Land Title Survey Table A Alta Deliverables:
plat Hard Copy (min 24 X36 ) Plat Digital Copy
plat Does Not Have To Be Recorded.
provide Copies Of All Recorded Conveyances, Plats And Deeds For 1922 To Present.
item 2 Install Survey Control Monument 15 Each
furnish And Install Precast Concrete Monument 6 X6 X36 With 2.5 Minimum Bronze Marker.
markers Will Be Placed At Locations Agreed To With The Cor. Include Costs To Traverse And Balance The Control Point Network. See Attachment 2 - Example Marker.
item 3 Install Survey Control Disk 10 Each
furnish And Install A 2.5 Minimum Bronze Marker On Either A Rebar Base Or In Existing Concrete.
rebar Shall Be A Minimum Of 2 Long #5 Bar.
concrete Install Will Be Drilled And Grouted Into Existing Concrete. Include Costs To Traverse And Balance The Control Point Network. See Attachment 2 - Example Marker.
item 4 Topographic Survey Of Property 1 Lump Sum This Item Is An Add Alternate For Items 5 And 15 Of Alta/nsps Land Title Survey Table A. Perform A Topographic Survey Of The Property, Survey Drones Would Be Permitted For This Task.
the Performance Period For This Work Is 120 Days From Time Of Award, Unless Other Time Frames Are Approved In Writing By The Contracting Office With No Options To Renew.
services Will Be Performed During Business Hours 7:00am 4:30 Pm. If Work Needs To Be Done Off Hours, It Must Be Coordinated With The Cor.
there Will Be No Unscheduled Work During Federal Holidays.
vha Supplemental Contract Requirements For Combatting Covid-19
contractor Employees Who Work In Or Travel To Vha Locations Must Comply With The Following:
documentation Requirements:
if Fully Vaccinated, Contractors Shall Show Proof Of Vaccination.
note: Acceptable Proof Of Vaccination Includes A Signed Record Of Immunization From A Health Care Provider Or Pharmacy, A Copy Of The Covid-19 Vaccination Record Card (cdc Form Mls- 319813_r, Published On September 3, 2020), Or A Copy Of Medical Records Documenting The Vaccination.
if Unvaccinated, Contractors Shall Show Negative Covid-19 Test Results Dated Within Three Calendar Days Prior To Desired Entry Date. Test Must Be Approved By The Food And Drug Administration (fda) For Emergency Use Or Full Approval. This Includes Tests Available By A Doctor S Order Or An Fda Approved Over-the-counter Test That Includes An Affiliated Telehealth Service.
documentation Cited In This Section Shall Be Digitally Or Physically Maintained On Each Contractor Employee While In A Va Facility And Is Subject To Inspection Prior To Entry To Va Facilities And After Entry For Spot Inspections By Contracting Officer Representatives (cors) Or Other Hospital Personnel.
documentation Will Not Be Collected By The Va; Contractors Shall, At All Times, Adhere To And Ensure Compliance With Federal Laws Designed To Protect Contractor Employee Health Information And Personally Identifiable Information.
contractor Employees Are Subject To Daily Screening For Covid-19 And May Be Denied Entry To Va Facilities If They Fail To Pass Screening Protocols. As Part Of The Screening Process Contractors May Be Asked Screening Questions Found On The Covid-19 Screening Tool. Check Regularly For Updates.
contractor Employees Who Work Away From Va Locations, But Who Will Have Direct Contact With Va Patients Shall Self-screen Utilizing The Covid-19 Screening Tool, In Advance, Each Day That They Will Have Direct Patient Contact And In Accordance With Their Person Or Persons Who Coordinate Covid-19 Workplace Safety Efforts At Covered Contractor Workplaces. Contractors Shall, At All Times, Adhere To And Ensure Compliance With Federal Laws Designed To Protect Contractor Employee Health Information And Personally Identifiable Information.
contractor Must Immediately Notify Their Cor Or Contracting Officer If Contract Performance Is Jeopardized Due To Contractor Employees Being Denied Entry Into Va Facilities.
for Indefinite Delivery Contracts: Contractor Agrees To Comply With Vha Supplemental Contract Requirements For Any Task Or Delivery Orders Issued Prior To This Modification When Performance Has Already Commenced.
american Land Title Associationâ® (alta)
national Society Of Professional Surveyors (nsps)
minimum Standard Detail Requirements For Alta/nsps Land Title Surveys
copyright 2021. All Rights Reserved.
american Land Title Association And National Society Of Professional Surveyors
page 10 Of 10
minimum Standard Detail Requirements For Alta/nsps Land Title Surveys
(effective February 23, 2021)
purpose - Members Of The American Land Title Associationâ® (alta) Have Specific Needs, Unique To Title Insurance Matters, When Asked To Insure Title To Land Without Exception As To The Many Matters Which Might Be Discoverable From Survey And Inspection, And Which Are Not Evidenced By The Public Records.
for A Survey Of Real Property, And The Plat, Map Or Record Of Such Survey, To Be Acceptable To A Title Insurance Company For The Purpose Of Insuring Title To Said Real Property Free And Clear Of Survey Matters (except Those Matters Disclosed By The Survey And Indicated On The Plat Or Map), Certain Specific And Pertinent Information Must Be Presented For The Distinct And Clear Understanding Between The Insured, The Client (if Different From The Insured), The Title Insurance Company (insurer), The Lender, And The Surveyor Professionally Responsible For The Survey.
in Order To Meet Such Needs, Clients, Insurers, Insureds, And Lenders Are Entitled To Rely On Surveyors To Conduct Surveys And Prepare Associated Plats Or Maps That Are Of A Professional Quality And Appropriately Uniform, Complete, And Accurate. To That End, And In The Interests Of The General Public, The Surveying Profession, Title Insurers, And Abstracters, The Alta And The Nsps Jointly Promulgate The Within Details And Criteria Setting Forth A Minimum Standard Of Performance For Alta/nsps Land Title Surveys. A Complete 2021 Alta/nsps Land Title Survey Includes:
the On-site Fieldwork Required Pursuant To Section 5,
the Preparation Of A Plat Or Map Pursuant To Section 6 Showing The Results Of The Fieldwork And Its Relationship To Documents Provided To Or Obtained By The Surveyor Pursuant To Section 4,
any Information From Table A Items Requested By The Client, And
the Certification Outlined In Section 7.
request For Survey - The Client Shall Request The Survey, Or Arrange For The Survey To Be Requested, And Shall Provide A Written Authorization To Proceed From The Person Or Entity Responsible For Paying For The Survey. Unless Specifically Authorized In Writing By The Insurer, The Insurer Shall Not Be Responsible For Any Costs Associated With The Preparation Of The Survey. The Request Must Specify That An "alta/nsps Land Title Survey" Is Required And Which Of The Optional Items Listed In Table A, If Any, Are To Be Incorporated. Certain Properties Or Interests In Real Properties May Present Issues Outside Those Normally Encountered On An Alta/nsps Land Title Survey (e.g., Marinas, Campgrounds, Mobile Home Parks, Easements, Leases, Mineral Interests, Other Non-fee Simple Interests). The Scope Of Work Related To Surveys Of Such Properties Or Interests In Real Properties Should Be Discussed With The Client, Lender, And Insurer, And Agreed Upon In Writing Prior To Commencing Work On The Survey. When Required, The Client Shall Secure Permission For The Surveyor To Enter Upon The Property To Be Surveyed, Adjoining Properties, Or Offsite Easements.
surveying Standards And Standards Of Care
effective Date - The 2021 Minimum Standard Detail Requirements For Alta/nsps Land Title Surveys Are Effective February 23, 2021. As Of That Date, All Previous Versions Of The Minimum Standard Detail Requirements For Alta/acsm Or Alta/nsps Land Title Surveys Are Superseded By These Standards.
other Requirements And Standards Of Practice - Many States And Some Local Jurisdictions Have Adopted Statutes, Administrative Rules, And/or Ordinances That Set Out Standards Regulating The Practice Of Surveying Within Their Jurisdictions. In Addition To The Standards Set Forth Herein, Surveyors Must Also Conduct Their Surveys In Accordance With Applicable Jurisdictional Survey Requirements And Standards Of Practice. Where Conflicts Between The Standards Set Forth Herein
and Any Such Jurisdictional Requirements And Standards Of Practice Occur, The More Stringent Must Apply.
the Normal Standard Of Care - Surveyors Should Recognize That There May Be Unwritten Local, State, And/or Regional Standards Of Care Defined By The Practice Of The Prudent Surveyor In Those Locales.
boundary - The Boundary Lines And Corners Of Any Property Or Interest In Real Property Being Surveyed (hereafter, The Surveyed Property Or Property To Be Surveyed ) As Part Of An Alta/nsps Land Title Survey Must Be Established And/or Retraced In Accordance With Appropriate Boundary Law Principles Governed By The Set Of Facts And Evidence Found In The Course Of Performing The Research And Fieldwork.
measurement Standards - The Following Measurement Standards Address Relative Positional Precision For The Monuments Or Witnesses Marking The Corners Of The Surveyed Property.
Relative Positional Precision Means The Length Of The Semi-major Axis, Expressed In Meters Or Feet, Of The Error Ellipse Representing The Uncertainty In The Position Of The Monument Or Witness Marking Any Boundary Corner Of The Surveyed Property Relative To The Position Of The Monument Or Witness Marking An Immediately Adjacent Boundary Corner Of The Surveyed Property Resulting From Random Errors In The Measurements Made In Determining Those Positions At The 95 Percent Confidence Level. Relative Positional Precision Can Be Estimated By The Results Of A Correctly Weighted Least Squares Adjustment Of The Survey. Alternatively, Relative Positional Precision Can Be Estimated By The Standard Deviation Of The Distance Between The Monument Or Witness Marking Any Boundary Corner Of The Surveyed Property And The Monument Or Witness Marking An Immediately Adjacent Boundary Corner Of The Surveyed Property (called Local Accuracy) That Can Be Computed Using The Full Covariance Matrix Of The Coordinate Inverse Between Any Given Pair Of Points, Understanding That Relative Positional Precision Is Based On The 95 Percent Confidence Level, Or Approximately 2 Standard Deviations.
any Boundary Lines And Corners Established Or Retraced May Have Uncertainties In Location Resulting From (1) The Availability, Condition, History And Integrity Of Reference Or Controlling Monuments, (2) Ambiguities In The Record Descriptions Or Plats Of The Surveyed Property Or Its Adjoiners, (3) Occupation Or Possession Lines As They May Differ From The Written Title Lines, Or
(4) Relative Positional Precision. Of These Four Sources Of Uncertainty, Only Relative Positional Precision Is Controllable, Although, Due To The Inherent Errors In Any Measurement, It Cannot Be Eliminated. The Magnitude Of The First Three Uncertainties Can Be Projected Based On Evidence; Relative Positional Precision Is Estimated Using Statistical Means (see Section 3.e.i. Above And Section 3.e.v. Below).
the First Three Of These Sources Of Uncertainty Must Be Weighed As Part Of The Evidence In The Determination Of Where, In The Surveyor S Opinion, The Boundary Lines And Corners Of The Surveyed Property Should Be Located (see Section 3.d. Above). Relative Positional Precision Is A Measure Of How Precisely The Surveyor Is Able To Monument And Report Those Positions; It Is Not A Substitute For The Application Of Proper Boundary Law Principles. A Boundary Corner Or Line May Have A Small Relative Positional Precision Because The Survey Measurements Were Precise, Yet Still Be In The Wrong Position (i.e., Inaccurate) If It Was Established Or Retraced Using Faulty Or Improper Application Of Boundary Law Principles.
for Any Measurement Technology Or Procedure Used On An Alta/nsps Land Title Survey, The Surveyor Must (1) Use Appropriately Trained Personnel, (2) Compensate For Systematic Errors, Including Those Associated With Instrument Calibration, And (3) Use Appropriate Error Propagation And Measurement Design Theory (selecting The Proper Instruments, Geometric Layouts, And Field And Computational Procedures) To Control Random Errors Such That The Maximum Allowable Relative Positional Precision Outlined In Section 3.e.v. Below Is Not Exceeded.
the Maximum Allowable Relative Positional Precision For An Alta/nsps Land Title Survey Is 2 Cm (0.07 Feet) Plus 50 Parts Per Million (based On The Direct Distance Between The Two
corners Being Tested). It Is Recognized That In Certain Circumstances, The Size Or Configuration Of The Surveyed Property, Or The Relief, Vegetation, Or Improvements On The Surveyed Property, Will Result In Survey Measurements For Which The Maximum Allowable Relative Positional Precision May Be Exceeded In Which Case The Reason Shall Be Noted Pursuant To Section
6.b.x. Below.
records Research - It Is Recognized That For The Performance Of An Alta/nsps Land Title Survey, The Surveyor Will Be Provided With Appropriate And, When Possible, Legible Data That Can Be Relied Upon In The Preparation Of The Survey. In Order To Complete An Alta/nsps Land Title Survey, The Surveyor Must Be Provided With The Following:
the Current Record Description Of The Real Property To Be Surveyed Or, In The Case Of An Original Survey Prepared For Purposes Of Locating And Describing Real Property That Has Not Been Previously Separately Described In Documents Conveying An Interest In The Real Property, The Current Record Description Of The Parent Parcel That Contains The Property To Be Surveyed;
complete Copies Of The Most Recent Title Commitment Or, If A Title Commitment Is Not Available, Other Title Evidence Satisfactory To The Title Insurer;
the Following Documents From Records Established Under State Statutes For The Purpose Of Imparting Constructive Notice Of Matters Relating To Real Property (public Records):
the Current Record Descriptions Of Any Adjoiners To The Property To Be Surveyed, Except Where Such Adjoiners Are Lots In Platted, Recorded Subdivisions;
any Recorded Easements Benefitting The Property To Be Surveyed; And
any Recorded Easements, Servitudes, Or Covenants Burdening The Property To Be Surveyed; And
if Desired By The Client, Any Unrecorded Documents Affecting The Property To Be Surveyed And Containing Information To Which The Survey Shall Make Reference.
except, However, If The Documents Outlined In This Section Are Not Provided To The Surveyor Or If Non-public Or Quasi-public Documents Are Otherwise Required To Complete The Survey, The Surveyor Must Conduct That Research Which Is Required Pursuant To The Statutory Or Administrative Requirements Of The Jurisdiction Where The Surveyed Property Is Located And That Research (if Any) Which Is Negotiated And Outlined In The Terms Of The Contract Between The Surveyor And The Client.
fieldwork - The Survey Must Be Performed On The Ground (except As May Be Otherwise Negotiated Pursuant To Table A, Item 15 Below). Except As Related To The Precision Of The Boundary, Which Is Addressed In Section 3.e. Above, Features Located During The Fieldwork Shall Be Located To What Is, In The Surveyor S Professional Opinion, The Appropriate Degree Of Precision Based On (a) The Planned Use Of The Surveyed Property, If Reported In Writing To The Surveyor By The Client, Lender, Or Insurer, Or (b) The Existing Use, If The Planned Use Is Not So Reported. The Fieldwork Shall Include The Following:
monuments
the Location, Size, Character, And Type Of Any Monuments Found During The Fieldwork.
the Location, Size, Character, And Type Of Any Monuments Set During The Fieldwork, If Item 1 Of Table A Was Selected Or If Otherwise Required By Applicable Jurisdictional Requirements And/or Standards Of Practice.
the Location, Description, And Character Of Any Lines That Control The Boundaries Of The Surveyed Property.
rights Of Way And Access
the Distance From The Appropriate Corner Or Corners Of The Surveyed Property To The Nearest Right Of Way Line, If The Surveyed Property Does Not Abut A Right Of Way.
the Name Of Any Street, Highway, Or Other Public Or Private Way Abutting The Surveyed Property, Together With The Width Of The Travelled Way And The Location Of Each Edge Of The Travelled Way Including On Divided Streets And Highways. If The Documents Provided To Or Obtained By The Surveyor Pursuant To Section 4 Indicate No Access From The Surveyed Property To The Abutting Street Or Highway, The Width And Location Of The Travelled Way Need Not Be Located.
visible Evidence Of Physical Access (e.g., Curb Cuts, Driveways) To Any Abutting Streets, Highways, Or Other Public Or Private Ways.
the Location And Character Of Vehicular, Pedestrian, Or Other Forms Of Access By Other Than The Apparent Occupants Of The Surveyed Property To Or Across The Surveyed Property Observed In The Process Of Conducting The Fieldwork (e.g., Driveways, Alleys, Private Roads, Railroads, Railroad Sidings And Spurs, Sidewalks, Footpaths).
without Expressing A Legal Opinion As To Ownership Or Nature, The Location And Extent Of Any Potentially Encroaching Driveways, Alleys, And Other Ways Of Access From Adjoining Properties Onto The Surveyed Property Observed In The Process Of Conducting The Fieldwork.
where Documentation Of The Location Of Any Street, Road, Or Highway Right Of Way Abutting, On, Or Crossing The Surveyed Property Was Not Disclosed In Documents Provided To Or Obtained By The Surveyor, Or Was Not Otherwise Available From The Controlling Jurisdiction (see Section 6.c.iv. Below), The Evidence And Location Of Parcel Corners On The Same Side Of The Street As The Surveyed Property Recovered In The Process Of Conducting The Fieldwork Which May Indicate The Location Of Such Right Of Way Lines (e.g., Lines Of Occupation, Survey Monuments).
evidence Of Access To And From Waters Adjoining The Surveyed Property Observed In The Process Of Conducting The Fieldwork (e.g., Paths, Boat Slips, Launches, Piers, Docks).
lines Of Possession And Improvements Along The Boundaries
the Character And Location Of Evidence Of Possession Or Occupation Along The Perimeter Of The Surveyed Property, Both By The Occupants Of The Surveyed Property And By Adjoiners, Observed In The Process Of Conducting The Fieldwork.
unless Physical Access Is Restricted, The Character And Location Of All Walls, Buildings, Fences, And Other Improvements Within Five Feet Of Each Side Of The Boundary Lines Observed In The Process Of Conducting The Fieldwork (see Section 5.e.iv. Regarding Utility Poles). Trees, Bushes, Shrubs, And Other Vegetation Need Not Be Located Other Than As Specified In The Contract, Unless They Are Deemed By The Surveyor To Be Evidence Of Possession Or Occupation Pursuant To Section 5.c.i.
without Expressing A Legal Opinion As To The Ownership Or Nature Of The Potential Encroachment, The Evidence, Location, And Extent Of Potentially Encroaching Structural Appurtenances And Projections Observed In The Process Of Conducting The Fieldwork (e.g., Fire Escapes, Bay Windows, Windows And Doors That Open Out, Flue Pipes, Stoops, Eaves, Cornices, Areaways, Steps, Trim) By Or Onto Adjoining Property, Or Onto Rights Of Way, Easements, Or Setback Lines Disclosed In Documents Provided To Or Obtained By The Surveyor.
buildings
the Location Of Buildings On The Surveyed Property Observed In The Process Of Conducting The Fieldwork.
easements And Servitudes
evidence Of Any Easements Or Servitudes Burdening The Surveyed Property As Disclosed In The Documents Provided To Or Obtained By The Surveyor Pursuant To Section 4 And Observed In The Process Of Conducting The Fieldwork.
evidence Of Easements, Servitudes, Or Other Uses By Other Than The Apparent Occupants Of The Surveyed Property Not Disclosed In The Documents Provided To Or Obtained By The Surveyor Pursuant To Section 4, But Observed In The Process Of Conducting The Fieldwork If They Are On Or Across The Surveyed Property (e.g., Roads, Drives, Sidewalks, Paths And Other Ways Of Access, Utility Service Lines, Utility Locate Markings (including The Source Of The Markings, With A Note If Unknown), Water Courses, Ditches, Drains, Telephone Lines, Fiber Optic Lines, Electric Lines, Water Lines, Sewer Lines, Oil Pipelines, Gas Pipelines).
surface Indications Of Underground Easements Or Servitudes On Or Across The Surveyed Property Observed In The Process Of Conducting The Fieldwork (e.g., Utility Cuts, Vent Pipes, Filler Pipes, Utility Locate Markings (including The Source Of The Markings, With A Note If Unknown)).
evidence On Or Above The Surface Of The Surveyed Property Observed In The Process Of
conducting The Fieldwork, Which Evidence May Indicate Utilities Located On, Over, Or Beneath The Surveyed Property. Examples Of Such Evidence Include Pipeline Markers, Utility Locate Markings (including The Source Of The Markings, With A Note If Unknown), Manholes, Valves, Meters, Transformers, Pedestals, Clean-outs, Overhead Lines, Guy Wires, And Utility Poles On Or Within Ten Feet Of The Surveyed Property. Without Expressing A Legal Opinion As To The Ownership Or Nature Of The Potential Encroachment, The Extent Of All Encroaching Utility Pole Crossmembers Or Overhangs.
cemeteries
as Accurately As The Evidence Permits, The Perimeter Of Cemeteries And Burial Grounds, And The Location Of Isolated Gravesites Not Within A Cemetery Or Burial Ground, (i) Disclosed In The Documents Provided To Or Obtained By The Surveyor, Or (ii) Observed In The Process Of Conducting The Fieldwork.
water Features
the Location Of Springs, Ponds, Lakes, Streams, Rivers, Canals, Ditches, Marshes, And Swamps On, Running Through, Or Outside, But Within Five Feet Of, The Perimeter Boundary Of The Surveyed Property And Observed During The Process Of Conducting The Fieldwork.
the Location Of Any Water Feature Forming A Boundary Of The Surveyed Property. The Attribute(s) Of The Water Feature Located (e.g., Top Of Bank, Edge Of Water, High Water Mark) Should Be Congruent With The Boundary As Described In The Record Description Or, In The Case Of An Original Survey, In The New Description (see Section 6.b.vi. Below).
plat Or Map - A Plat Or Map Of An Alta/nsps Land Title Survey Shall Show The Following Information. Where Dimensioning Is Appropriate, Dimensions Shall Be Annotated To What Is, In The Surveyor S Professional Opinion, The Appropriate Degree Of Precision Based On (a) The Planned Use Of The Surveyed Property, If Reported In Writing To The Surveyor By The Client, Lender, Or Insurer, Or (b) Existing Use, If The Planned Use Is Not So Reported.
field Locations. The Evidence And Locations Gathered, And The Monuments And Lines Located During The Fieldwork Pursuant To Section 5 Above, With Accompanying Notes If Deemed Necessary By The Surveyor Or As Otherwise Required As Specified Below.
boundary, Descriptions, Dimensions, And Closures
(a) The Current Record Description Of The Surveyed Property, Or
(b) In The Case Of An Original Survey, The Current Record Document Number Of The Parent Tract That Contains The Surveyed Property.
any New Description Of The Surveyed Property That Was Prepared In Conjunction With The Survey, Including A Statement Explaining Why The New Description Was Prepared. Except In The Case Of An Original Survey, Preparation Of A New Description Should Be Avoided Unless Deemed Necessary Or Appropriate By The Surveyor And Insurer. Preparation Of A New Description Should Also Generally Be Avoided When The Record Description Is A Lot Or Block In A Platted, Recorded Subdivision. Except In The Case Of An Original Survey, If A New Description Is Prepared, A Note Must Be Provided Stating (a) That The New Description Describes The Same Real Estate As The Record Description Or, (b) If It Does Not, How The New Description Differs From The Record Description.
the Point Of Beginning, The Remote Point Of Beginning Or Point Of Commencement (if Applicable) And All Distances And Directions Identified In The Record Description Of The Surveyed Property (and In The New Description, If One Was Prepared). Where A Measured Or Calculated Dimension Differs From The Record By An Amount Deemed Significant By The Surveyor, Such Dimension Must Be Shown In Addition To, And Differentiated From, The Corresponding Record Dimension. All Dimensions Shown On The Survey And Contained In Any New Description Must Be Horizontal Ground Dimensions Unless Otherwise Noted.
the Direction, Distance, And Curve Data Necessary To Compute A Mathematical Closure Of The Surveyed Boundary. A Note If The Record Description Does Not Mathematically Close. The Basis Of Bearings And, Where It Differs From The Record Basis, The Difference.
the Remainder Of Any Recorded Lot Or Existing Parcel, When The Surveyed Property Is
composed Of Only A Portion Of Such Lot Or Parcel, Shall Be Graphically Depicted. Such Remainder Need Not Be Included As Part Of The Actual Survey, Except To The Extent Necessary To Locate The Lines And Corners Of The Surveyed Property, And It Need Not Be Fully Dimensioned Or Drawn At The Same Scale As The Surveyed Property.
when The Surveyed Property Includes A Title Line Defined By A Water Boundary, A Note On The Face Of The Plat Or Map Noting The Date The Boundary Was Measured, Which Attribute(s) Of The Water Feature Was/were Located, And The Caveat That The Boundary Is Subject To Change Due To Natural Causes And That It May Or May Not Represent The Actual Location Of The Limit Of Title. When The Surveyor Is Aware Of Natural Or Artificial Realignments Or Changes In Such Boundaries, The Extent Of Those Changes And Facts Shall Be Shown Or Explained.
the Relationship Of The Boundaries Of The Surveyed Property To Its Adjoiners (e.g., Contiguity, Gaps, Overlaps) Where Ascertainable From Documents Provided To Or Obtained By The Surveyor Pursuant To Section 4 And/or From Field Evidence Gathered During The Process Of Conducting The Fieldwork. If The Surveyed Property Is Composed Of Multiple Parcels, The Extent Of Any Gaps Or Overlaps Between Those Parcels Must Be Identified. Where Gaps Or Overlaps Are Identified, The Surveyor Must, Prior To Or Upon Delivery Of The Final Plat Or Map, Disclose This To The Insurer And Client.
when, In The Opinion Of The Surveyor, The Results Of The Survey Differ Significantly From The Record, Or If A Fundamental Decision Related To The Boundary Resolution Is Not Clearly Reflected On The Plat Or Map, The Surveyor Must Explain This Information With Notes On The Face Of The Plat Or Map.
the Location Of Buildings On The Surveyed Property Dimensioned Perpendicular To Those Perimeter Boundary Lines That The Surveyor Deems Appropriate (i.e., Where Potentially Impacted By A Setback Line) And/or As Requested By The Client, Lender Or Insurer.
a Note On The Face Of The Plat Or Map Explaining The Site Conditions That Resulted In A Relative Positional Precision That Exceeds The Maximum Allowed Pursuant To Section 3.e.v.
a Note On The Face Of The Plat Or Map Identifying Areas, If Any, On The Boundaries Of The Surveyed Property, To Which Physical Access Within Five Feet Was Restricted (see Section 5.c.ii.).
a Note On The Face Of The Plat Or Map Identifying The Source Of The Title Commitment Or Other Title Evidence Provided Pursuant To Section 4, And The Effective Date And The Name Of The Insurer Of Same.
easements, Servitudes, Rights Of Way, Access, And Documents
the Location, Width, And Recording Information Of All Plottable Rights Of Way, Easements, And Servitudes Burdening And Benefitting The Surveyed Property, As Evidenced By Documents Provided To Or Obtained By The Surveyor Pursuant To Section 4.
a Summary Of All Rights Of Way, Easements, And Other Survey-related Matters Burdening The Surveyed Property And Identified In The Title Evidence Provided To Or Obtained By The Surveyor Pursuant To Section 4. Such Summary Must Include The Record Information Of Each Such Right Of Way, Easement, Or Other Survey-related Matter, A Statement Indicating Whether It Lies Within Or Crosses The Surveyed Property, And A Related Note If:
its Location Is Shown;
its Location Cannot Be Determined From The Record Document;
there Was No Observed Evidence At The Time Of The Fieldwork;
it Is A Blanket Easement;
it Is Not On, Does Not Touch, And/or Based On The Description Contained In The Record Document Does Not Affect, The Surveyed Property;
it Limits Access To An Otherwise Abutting Right Of Way;
the Documents Are Illegible; Or
the Surveyor Has Information Indicating That It May Have Been Released Or Otherwise Terminated.
in Cases Where The Surveyed Property Is Composed Of Multiple Parcels, Indicate Which Of Such
parcels The Various Rights Of Way, Easements, And Other Survey-related Matters Cross Or Touch.
a Note If No Physical Access To An Abutting Street, Highway, Or Other Public Or Private Way Was Observed In The Process Of Conducting The Fieldwork.
the Locations And Widths Of Rights Of Way Abutting Or Crossing The Surveyed Property And The Source Of Such Information (a) Where Available From The Controlling Jurisdiction, Or (b) Where Disclosed In Documents Provided To Or Obtained By The Surveyor Pursuant To Section 4.
the Identifying Titles Of All Recorded Plats, Filed Maps, Right Of Way Maps, Or Similar Documents That The Survey Represents, Wholly Or In Part, With Their Recording Or Filing Data.
for Non-platted Adjoining Land, Recording Data And, Where Available, Tax Parcel Number, Identifying Adjoining Tracts According To Current Public Records. For Platted Adjoining Land, The Recording Data Of The Subdivision Plat.
platted Setback Or Building Restriction Lines That Appear On Recorded Subdivision Plats Or That Were Disclosed In Documents Provided To, Or Obtained By, The Surveyor.
If In The Process Of Preparing The Survey The Surveyor Becomes Aware Of A Recorded Easement Not Otherwise Listed In The Title Evidence Provided, The Surveyor Must Advise The Insurer Prior To Delivery Of The Plat Or Map And, Unless The Insurer Provides Evidence Of A Release Of That Easement, Show Or Otherwise Explain It On The Face Of The Plat Or Map, With A Note That The Insurer Has Been Advised.
presentation
the Plat Or Map Must Be Drawn On A Sheet Of Not Less Than 8 ½ By 11 Inches In Size At A Legible, Standard Engineering Scale, With That Scale Clearly Indicated In Words Or Numbers And With A Graphic Scale.
the Plat Or Map Must Include:
the Boundary Of The Surveyed Property Drawn In A Manner That Distinguishes It From Other Lines On The Plat Or Map.
if No Buildings Were Observed On The Surveyed Property In The Process Of Conducting The Fieldwork, A Note Stating No Buildings Observed.
a North Arrow (with North To The Top Of The Drawing When Practicable).
a Legend Of Symbols And Abbreviations.
a Vicinity Map Showing The Surveyed Property In Reference To Nearby Highway(s) Or Major Street Intersection(s).
supplementary Or Detail Diagrams When Necessary.
notes Explaining Any Modifications To Table A Items And The Nature Of Any Additional Table A Items (e.g., 20(a), 20(b), 20(c)) That Were Negotiated Between The Surveyor And Client.
the Surveyor S Project Number (if Any), And The Name, Registration Or License Number, Signature, Seal, Street Address, Telephone Number, Company Website, And Email Address (if Any) Of The Surveyor Who Performed The Survey.
the Date(s) Of Any Revisions Made By The Surveyor Who Performed The Survey.
sheet Numbers Where The Plat Or Map Is Composed Of More Than One Sheet.
the Caption Alta/nsps Land Title Survey.
when Recordation Or Filing Of A Plat Or Map Is Required By State Statutes Or Local Ordinances, Such Plat Or Map Shall Be Produced In The Required Form.
certification - The Plat Or Map Of An Alta/nsps Land Title Survey Must Bear Only The Following Unaltered Certification Except As May Be Required Pursuant To Section 3.b. Above:
to (name Of Insured, If Known), (name Of Lender, If Known), (name Of Insurer, If Known), (names Of Others As Negotiated With The Client):
this Is To Certify That This Map Or Plat And The Survey On Which It Is Based Were Made In Accordance With The 2021 Minimum Standard Detail Requirements For Alta/nsps Land Title
surveys, Jointly Established And Adopted By Alta And Nsps, And Includes Items Of Table A Thereof. The Fieldwork Was Completed On [date].
date Of Plat Or Map: (surveyor S Signature, Printed Name And Seal With Registration/license Number)
deliverables - The Surveyor Shall Furnish Copies Of The Plat Or Map Of Survey To The Insurer And Client And As Otherwise Negotiated With The Client. Hard Copies Shall Be On Durable And Dimensionally Stable Material Of A Quality Standard Acceptable To The Insurer. A Digital Image Of The Plat Or Map May Be Provided In Addition To, Or In Lieu Of, Hard Copies Pursuant To The Terms Of The Contract. If The Surveyor Is Required To Record Or File A Plat Or Map Pursuant To State Statute Or Local Ordinance It Shall Be So Recorded Or Filed.
Table A
optional Survey Responsibilities And Specifications
note: Whether Any Of The Nineteen (19) Items Of Table A Are To Be Selected, And The Exact Wording Of And Fee For Any Selected Item, May Be Negotiated Between The Surveyor And Client. Any Additional Items Negotiated Between The Surveyor And Client Must Be Identified As 20(a), 20(b), Etc. Any Additional Items Negotiated Between The Surveyor And Client, And Any Negotiated Changes To The Wording Of A Table A Item, Must Be Explained Pursuant To Section 6.d.ii.(g). Notwithstanding Table A Items 5 And 11, If An Engineering Design Survey Is Desired As Part Of An Alta/nsps Land Title Survey, Such Services Should Be Negotiated Under Table A, Item 20.
if Checked, The Following Optional Items Are To Be Included In The Alta/nsps Land Title Survey, Except As Otherwise Qualified (see Note Above):
X Monuments Placed (or A Reference Monument Or Witness To The Corner) At All Major Corners Of The Boundary Of The Surveyed Property, Unless Already Marked Or Referenced By Existing Monuments Or Witnesses In Close Proximity To The Corner.
Address(es) Of The Surveyed Property If Disclosed In Documents Provided To Or Obtained By The Surveyor, Or Observed While Conducting The Fieldwork.
Flood Zone Classification (with Proper Annotation Based On Federal Flood Insurance Rate Maps Or The State Or Local Equivalent) Depicted By Scaled Map Location And Graphic Plotting Only.
X Gross Land Area (and Other Areas If Specified By The Client).
#5 Vertical Relief With The Source Of Information (e.g., Ground Survey, Aerial Map), Contour Interval, Datum, With Originating Benchmark, When Appropriate.
(a) If The Current Zoning Classification, Setback Requirements, The Height And Floor Space Area Restrictions, And Parking Requirements Specific To The Surveyed Property Are Set Forth In A Zoning Report Or Letter Provided To The Surveyor By The Client Or The Client S Designated Representative, List The Above Items On The Plat Or Map And Identify The Date And Source Of The Report Or Letter.
(b) If The Zoning Setback Requirements Specific To The Surveyed Property Are Set Forth In A Zoning Report Or Letter Provided To The Surveyor By The Client Or The Client S Designated Representative, And If Those Requirements Do Not Require An Interpretation By The Surveyor, Graphically Depict Those Requirements On The Plat Or Map And Identify The Date And Source Of The Report Or Letter.
X (a) Exterior Dimensions Of All Buildings At Ground Level.
(b) Square Footage Of:
X (1) Exterior Footprint Of All Buildings At Ground Level.
(2) Other Areas As Specified By The Client.
(c) Measured Height Of All Buildings Above Grade At A Location Specified By The Client. If No Location Is Specified, The Point Of Measurement Shall Be Identified.
Substantial Features Observed In The Process Of Conducting The Fieldwork (in Addition To The Improvements And Features Required Pursuant To Section 5 Above) (e.g., Parking Lots, Billboards, Signs, Swimming Pools, Landscaped Areas, Substantial Areas Of Refuse).
Number And Type (e.g., Disabled, Motorcycle, Regular, And Other Marked Specialized Types) Of Clearly Identifiable Parking Spaces On Surface Parking Areas, Lots, And In Parking Structures. Striping Of Clearly Identifiable Parking Spaces On Surface Parking Areas And Lots.
As Designated By The Client, A Determination Of The Relationship And Location Of Certain Division Or Party Walls With Respect To Adjoining Properties.
evidence Of Underground Utilities Existing On Or Serving The Surveyed Property (in Addition To The Observed Evidence Of Utilities Required Pursuant To Section 5.e.iv.) As Determined By:
(a) Plans And/or Reports Provided By Client (with Reference As To The Sources Of Information)
(b) Markings Coordinated By The Surveyor Pursuant To A Private Utility Locate Request.
note To The Client, Insurer, And Lender With Regard To Table A, Item 11, Information From The Sources Checked Above Will Be Combined With Observed Evidence Of Utilities Pursuant To Section 5.e.iv. To Develop A View Of The Underground Utilities. However, Lacking Excavation, The Exact Location Of Underground Features Cannot Be Accurately, Completely, And Reliably Depicted. In Addition, In Some Jurisdictions, 811 Or Other Similar Utility Locate Requests From Surveyors May Be Ignored Or Result In An Incomplete Response, In Which Case The Surveyor Shall Note On The Plat Or Map How This Affected The Surveyor S Assessment Of The Location Of The Utilities. Where Additional Or More Detailed Information Is Required, The Client Is Advised That Excavation May Be Necessary.
X As Specified By The Client, Governmental Agency Survey-related Requirements (e.g., Hud Surveys, Surveys For Leases On Bureau Of Land Management Managed Lands). The Relevant Survey Requirements Are To Be Provided By The Client Or Client S Designated Representative.
Names Of Adjoining Owners According To Current Tax Records. If More Than One Owner, Identify The First Owner S Name Listed In The Tax Records Followed By Et Al.
As Specified By The Client, Distance To The Nearest Intersecting Street.
_#5 Rectified Orthophotography, Photogrammetric Mapping, Remote Sensing, Airborne/mobile Laser Scanning And Other Similar Products, Tools Or Technologies As The Basis For Showing The Location Of Certain Features (excluding Boundaries) Where Ground Measurements Are Not Otherwise Necessary To Locate Those Features To An Appropriate And Acceptable Accuracy Relative To A Nearby Boundary. The Surveyor Must (a) Discuss The Ramifications Of Such Methodologies (e.g., The Potential Precision And Completeness Of The Data Gathered Thereby) With The Insurer, Lender, And Client Prior To The Performance Of The Survey, And (b) Place A Note On The Face Of The Survey Explaining The Source, Date, Precision, And Other Relevant Qualifications Of Any Such Data.
Evidence Of Recent Earth Moving Work, Building Construction, Or Building Additions Observed In The Process Of Conducting The Fieldwork.
Proposed Changes In Street Right Of Way Lines, If Such Information Is Made Available To The Surveyor By The Controlling Jurisdiction. Evidence Of Recent Street Or Sidewalk Construction Or Repairs Observed In The Process Of Conducting The Fieldwork.
X Pursuant To Sections 5 And 6 (and Applicable Selected Table A Items, Excluding Table A Item 1), Include As Part Of The Survey Any Plottable Offsite (i.e., Appurtenant) Easements Disclosed In Documents Provided To Or Obtained By The Surveyor.
Professional Liability Insurance Policy Obtained By The Surveyor In The Minimum Amount Of
$ To Be In Effect Throughout The Contract Term. Certificate Of Insurance To Be Furnished Upon Request, But This Item Shall Not Be Addressed On The Face Of The Plat Or Map.
adopted By The American Land Title Association On October 1, 2020. More At: Www.alta.org.
adopted By The National Society Of Professional Surveyors On October 30, 2020. More At: Www.nsps.us.com.
attachment 2 - Example Survey Marker
2.5 Minimum Diameter Bronze
mountable On New Precast Monument, Existing Concrete Or Rebar Pin
Closing Date12 Aug 2024
Tender AmountRefer Documents
VETERANS AFFAIRS, DEPARTMENT OF USA Tender
United States
Details: This Is A Sources Sought Notice Only. This Is Not A Request For Quotes And No Contract Will Be
awarded From This Announcement. The Government Will Not Provide Any Reimbursement
for Responses Submitted In Response To This Source Sought Notice. Respondents Will Not Be
notified Of The Results Of The Evaluation.
the Purpose Of This Announcement Is To Perform Market Research To Gain Knowledge Of Potential
qualified Sources And Their Size Classification Relative To Naics 541330, (engineering Services)
with A Size Standard $25.5million. The Department Of Veterans Affairs (va), Network
contracting Office 1 (nco 1) Is Seeking To Identify Any Vendor Capable Of
providing A Boundary Survey Per The Requirements Below. Refer To The Statement Of
work Below For The Requested Requirement Description. The Standard Shall Be Of Quality; Meeting
or Exceeding Those Outlined In The Statement Of Work.
this Sources Sought Notice Provides An Opportunity For Respondents To Submit Their Capability
and Availability To Provide The Requirement Described Below. Vendors Are Being Invited To Submit
information Relative To Their Potential To Fulfill This Requirement, In The Form Of A Capability
response That Addresses The Specific Requirement Identified In This Sources Sought. Information
received From This Sources Sought Shall Be Utilized To Facilitate The Contracting Officer S Review
of The Market Base, For Acquisition Planning, Size Determination, And Procurement Strategy.
submission Instructions: Interested Parties Who Consider Themselves Qualified To Perform
boundary Surveys Are Invited To Submit A Response To This Sources Sought Notice By 7-17-2024.
all Responses Under This Sources Sought Notice Must Be Emailed To Carissa.sarazin@va.gov.
telephone Inquiries Will Not Be Accepted Or Acknowledged, And No Feedback Or Evaluations Will
be Provided To Companies Regarding Their Submissions.
interested Parties Should Complete The Attached Sources Sought Worksheet. Parties May Submit
additional Information Related To Their Capabilities, Provided It Contains All The Requirements
contained In The Sources Sought Worksheet. Responses To This Sources Sought Shall Not Exceed 8
pages. In Addition, All Submissions Should Be Provided Electronically In A Microsoft Word Or
adobe Pdf Format.
sam: Interested Parties Shall Be Register In The System For Award Management (sam) As
prescribed In Far Clause 52.232-33. Sam Information Can Be Obtained By Accessing The Internet
at Www.sam.gov Or By Calling 1-866-606-8220. Interested Parties Not Registered In Sam Will Be
ineligible To Receive A Government Contract, Should A Solicitation Be Issued Resulting From This
sources Sought.
vista: The Va Utilizes Vista To Issue A Purchase Order And Liquidate Invoices. Failure To
register In Vista May Result In Exclusion From The Issuance Of A Va Contract, Should A
solicitation Be Issued Resulting From This Sources Sought.
attachment 1
sources Sought Worksheet
qualification Information:
company / Institute Name: _______________________________________________________
address: ______________________________________________________________________
phone Number: ________________________________________________________________
point Of Contact: _______________________________________________________________
e-mail Address: ________________________________________________________________
unique Entity Identifier (uei) #: ___________________________________________________
cage Code: __________________________________________________________________
other Available Contract Vehicles (gsa/fss/nasa Sewp/etc): ________________________
_____________________________________________________________________________
_____________________________________________________________________________
socio-economic Status:
vip Verified Sdvosb: (y / N)
vip Verified Vosb: (y / N)
8(a): (y / N)
hubzone: (y / N)
economically Disadvantaged Women-owned Small Business: (y / N)
women-owned Small Business: (y / N)
small Business: (y / N)
note: Respondent Claiming Sdvosb And Vosb Status Shall Be Registered And Center For
veterans Enterprise (cve) Verified In Vetbiz Registry Www.vetbiz.gov.
based On The Responses To This Sources Sought Notice/market
research, This Requirement May Be Set-aside For Sdvosb, Vosb, Small
businesses Or Procured Through Full And Open Competition.
capability Statement:
provide A Brief Capability And Interest In Providing The Supply Of Shower Repairs As Listed In
attachment 2 Statement Of Work With Enough Information To Determine If Your Company Can
meet The Requirement. The Capabilities Statement For This Sources Sought Is Not A Request For
quotation, Request For Proposal Or Invitation For Bid, Nor Does It Restrict The Government To An
ultimate Acquisition Approach, But Rather The Government Is Requesting A Short Statement
regarding The Company S Ability To Provide The Services Outlined In The Sow. Any Commercial
brochures Or Currently Existing Marketing Material May Also Be Submitted With The Capabilities
statement. This Synopsis Is For Information And Planning Purposes Only And Is Not To Be Construed
as A Commitment By The Government. The Government Will Not Pay For Information Solicited.
respondents Will Not Be Notified Of The Results Of The Evaluation.
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
attachment 2
performance Work Statement
department Of Veterans Affairs (va)
medical Center, Leeds Ma
boundary Survey Of The Edward P. Boland Campus
1. General
the Va Central Western Mass. Edward P Boland Campus In Leeds, Ma Requires Survey Confirmation Of The Property Owned By The Va. The Original Tract Was Approximately 280 Acres And Is Now Approximately 105. The Va Has Records Of Agreements/conveyances That May Or May Not Have Occurred/been Recorded Over The And Is
looking For Confirmation Of The Property Owned By The Va Through A Alta/nsps Land Title Survey.
the Edward P. Boland Campus Also Has A Lot Of Construction Going On And Needs A Survey Control Network Installed To Standardized And Coordinate Construction And Records Throughout The Campus. A Traverse Through The Control Points Installed Is Required And Shall Be Submitted With The Control Point Coordinates. The Control Network Shall Use The Massachusetts State Plane Coordinate System.
place Of Performance:
421 N. Main St, Leeds Ma
2. Project Scope Of Work
item 1 Conduct An Alta/nsps Land Title Survey 1 Lump Sum
see Attachment 1 Alta/nsps Land Title Survey Table A
alta Deliverables:
plat Hard Copy (min 24 X36 )
plat Digital Copy
plat Does Not Have To Be Recorded.
provide Copies Of All Recorded Conveyances, Plats And Deeds For 1922 To Present.
item 2 Install Survey Control Monument 15 Each
furnish And Install Precast Concrete Monument 6 X6 X36 With 2.5 Minimum Bronze Marker.
markers Will Be Placed At Locations Agreed To With The Cor.
include Costs To Traverse And Balance The Control Point Network.
see Attachment 2 - Example Marker.
item 3 Install Survey Control Disk 10 Each
furnish And Install A 2.5 Minimum Bronze Marker On Either A Rebar Base Or In Existing Concrete.
rebar Shall Be A Minimum Of 2 Long #5 Bar.
concrete Install Will Be Drilled And Grouted Into Existing Concrete.
include Costs To Traverse And Balance The Control Point Network.
see Attachment 2 - Example Marker.
item 4 Topographic Survey Of Property 1 Lump Sum
this Item Is An Add Alternate For Items 5 And 15 Of Alta/nsps Land Title Survey Table A. Perform A
topographic Survey Of The Property, Survey Drones Would Be Permitted For This Task.
1/24/2024
3. The Performance Period For This Work Is 120 Days From Time Of Award, Unless Other Time Frames
are Approved In Writing By The Contracting Office With No Options To Renew.
a) Services Will Be Performed During Business Hours 7:00am 4:30 Pm. If Work Needs To Be Done
off Hours, It Must Be Coordinated With The Cor.
b) There Will Be No Unscheduled Work During Federal Holidays.
vha Supplemental Contract Requirements For Combatting Covid-19
1. Contractor Employees Who Work In Or Travel To Vha Locations Must Comply With The Following:
a. Documentation Requirements:
1) If Fully Vaccinated, Contractors Shall Show Proof Of Vaccination.
i. Note: Acceptable Proof Of Vaccination Includes A Signed Record Of Immunization From A Health
care Provider Or Pharmacy, A Copy Of The Covid-19 Vaccination Record Card (cdc Form Mls-
319813_r, Published On September 3, 2020), Or A Copy Of Medical Records Documenting The
vaccination.
2) If Unvaccinated, Contractors Shall Show Negative Covid-19 Test Results Dated Within Three Calendar
days Prior To Desired Entry Date. Test Must Be Approved By The Food And Drug Administration (fda)
for Emergency Use Or Full Approval. This Includes Tests Available By A Doctor S Order Or An Fda
approved Over-the-counter Test That Includes An Affiliated Telehealth Service.
3) Documentation Cited In This Section Shall Be Digitally Or Physically Maintained On Each Contractor
employee While In A Va Facility And Is Subject To Inspection Prior To Entry To Va Facilities And After
entry For Spot Inspections By Contracting Officer Representatives (cors) Or Other Hospital Personnel.
4) Documentation Will Not Be Collected By The Va; Contractors Shall, At All Times, Adhere To And Ensure
compliance With Federal Laws Designed To Protect Contractor Employee Health Information And
personally Identifiable Information.
2. Contractor Employees Are Subject To Daily Screening For Covid-19 And May Be Denied Entry To Va Facilities
if They Fail To Pass Screening Protocols. As Part Of The Screening Process Contractors May Be Asked
screening Questions Found On The Covid-19 Screening Tool. Check Regularly For Updates.
a. Contractor Employees Who Work Away From Va Locations, But Who Will Have Direct Contact With Va
patients Shall Self-screen Utilizing The Covid-19 Screening Tool, In Advance, Each Day That They Will Have
direct Patient Contact And In Accordance With Their Person Or Persons Who Coordinate Covid-19
workplace Safety Efforts At Covered Contractor Workplaces. Contractors Shall, At All Times, Adhere To And
ensure Compliance With Federal Laws Designed To Protect Contractor Employee Health Information And
personally Identifiable Information.
3. Contractor Must Immediately Notify Their Cor Or Contracting Officer If Contract Performance Is
jeopardized Due To Contractor Employees Being Denied Entry Into Va Facilities.
1/24/2024
4. For Indefinite Delivery Contracts: Contractor Agrees To Comply With Vha Supplemental Contract
requirements For Any Task Or Delivery Orders Issued Prior To This Modification When Performance Has
already Commenced.
american Land Title Associationâ® (alta) Minimum Standard Detail Requirements
national Society Of Professional Surveyors (nsps) For Alta/nsps Land Title Surveys
copyright 2021. All Rights Reserved. Page 1 Of 10
american Land Title Association And
national Society Of Professional Surveyors
minimum Standard Detail Requirements For
alta/nsps Land Title Surveys
(effective February 23, 2021)
1. Purpose - Members Of The American Land Title Associationâ® (alta) Have Specific Needs,
unique To Title Insurance Matters, When Asked To Insure Title To Land Without Exception As To The
many Matters Which Might Be Discoverable From Survey And Inspection, And Which Are Not
evidenced By The Public Records.
for A Survey Of Real Property, And The Plat, Map Or Record Of Such Survey, To Be Acceptable To A Title
insurance Company For The Purpose Of Insuring Title To Said Real Property Free And Clear Of Survey Matters
(except Those Matters Disclosed By The Survey And Indicated On The Plat Or Map), Certain Specific And
pertinent Information Must Be Presented For The Distinct And Clear Understanding Between The Insured, The
client (if Different From The Insured), The Title Insurance Company (insurer), The Lender, And The Surveyor
professionally Responsible For The Survey.
in Order To Meet Such Needs, Clients, Insurers, Insureds, And Lenders Are Entitled To Rely On Surveyors To
conduct Surveys And Prepare Associated Plats Or Maps That Are Of A Professional Quality And Appropriately
uniform, Complete, And Accurate. To That End, And In The Interests Of The General Public, The Surveying
profession, Title Insurers, And Abstracters, The Alta And The Nsps Jointly Promulgate The Within Details
and Criteria Setting Forth A Minimum Standard Of Performance For Alta/nsps Land Title Surveys. A
complete 2021 Alta/nsps Land Title Survey Includes:
(i) The On-site Fieldwork Required Pursuant To Section 5,
(ii) The Preparation Of A Plat Or Map Pursuant To Section 6 Showing The Results Of The Fieldwork
and Its Relationship To Documents Provided To Or Obtained By The Surveyor Pursuant To Section
4,
(iii) Any Information From Table A Items Requested By The Client, And
(iv) The Certification Outlined In Section 7.
2. Request For Survey - The Client Shall Request The Survey, Or Arrange For The Survey To Be
requested, And Shall Provide A Written Authorization To Proceed From The Person Or Entity Responsible For
paying For The Survey. Unless Specifically Authorized In Writing By The Insurer, The Insurer Shall Not Be
responsible For Any Costs Associated With The Preparation Of The Survey. The Request Must Specify That An
"alta/nsps Land Title Survey" Is Required And Which Of The Optional Items Listed In Table A, If Any,
are To Be Incorporated. Certain Properties Or Interests In Real Properties May Present Issues Outside Those
normally Encountered On An Alta/nsps Land Title Survey (e.g., Marinas, Campgrounds, Mobile Home
parks, Easements, Leases, Mineral Interests, Other Non-fee Simple Interests). The Scope Of Work Related To
surveys Of Such Properties Or Interests In Real Properties Should Be Discussed With The Client, Lender, And
insurer, And Agreed Upon In Writing Prior To Commencing Work On The Survey. When Required, The Client
shall Secure Permission For The Surveyor To Enter Upon The Property To Be Surveyed, Adjoining Properties,
or Offsite Easements.
3. Surveying Standards And Standards Of Care
a. Effective Date - The 2021 Minimum Standard Detail Requirements For Alta/nsps Land Title
surveys Are Effective February 23, 2021. As Of That Date, All Previous Versions Of The Minimum
standard Detail Requirements For Alta/acsm Or Alta/nsps Land Title Surveys Are
superseded By These Standards.
b. Other Requirements And Standards Of Practice - Many States And Some Local Jurisdictions
have Adopted Statutes, Administrative Rules, And/or Ordinances That Set Out Standards Regulating
the Practice Of Surveying Within Their Jurisdictions. In Addition To The Standards Set Forth Herein,
surveyors Must Also Conduct Their Surveys In Accordance With Applicable Jurisdictional Survey
requirements And Standards Of Practice. Where Conflicts Between The Standards Set Forth Herein
american Land Title Associationâ® (alta) Minimum Standard Detail Requirements
national Society Of Professional Surveyors (nsps) For Alta/nsps Land Title Surveys
copyright 2021. All Rights Reserved. Page 2 Of 10
american Land Title Association And
national Society Of Professional Surveyors
and Any Such Jurisdictional Requirements And Standards Of Practice Occur, The More Stringent Must
apply.
c. The Normal Standard Of Care - Surveyors Should Recognize That There May Be Unwritten Local,
state, And/or Regional Standards Of Care Defined By The Practice Of The Prudent Surveyor In Those
locales.
d. Boundary - The Boundary Lines And Corners Of Any Property Or Interest In Real Property Being
surveyed (hereafter, The Surveyed Property Or Property To Be Surveyed ) As Part Of An
alta/nsps Land Title Survey Must Be Established And/or Retraced In Accordance With
appropriate Boundary Law Principles Governed By The Set Of Facts And Evidence Found In The
course Of Performing The Research And Fieldwork.
e. Measurement Standards - The Following Measurement Standards Address Relative Positional
precision For The Monuments Or Witnesses Marking The Corners Of The Surveyed Property.
i. Relative Positional Precision Means The Length Of The Semi-major Axis, Expressed In Meters
or Feet, Of The Error Ellipse Representing The Uncertainty In The Position Of The Monument Or
witness Marking Any Boundary Corner Of The Surveyed Property Relative To The Position Of The
monument Or Witness Marking An Immediately Adjacent Boundary Corner Of The Surveyed
property Resulting From Random Errors In The Measurements Made In Determining Those
positions At The 95 Percent Confidence Level. Relative Positional Precision Can Be Estimated
by The Results Of A Correctly Weighted Least Squares Adjustment Of The Survey. Alternatively,
relative Positional Precision Can Be Estimated By The Standard Deviation Of The Distance
between The Monument Or Witness Marking Any Boundary Corner Of The Surveyed Property
and The Monument Or Witness Marking An Immediately Adjacent Boundary Corner Of The
surveyed Property (called Local Accuracy) That Can Be Computed Using The Full Covariance
matrix Of The Coordinate Inverse Between Any Given Pair Of Points, Understanding That Relative
positional Precision Is Based On The 95 Percent Confidence Level, Or Approximately 2 Standard
deviations.
ii. Any Boundary Lines And Corners Established Or Retraced May Have Uncertainties In Location
resulting From (1) The Availability, Condition, History And Integrity Of Reference Or Controlling
monuments, (2) Ambiguities In The Record Descriptions Or Plats Of The Surveyed Property Or Its
adjoiners, (3) Occupation Or Possession Lines As They May Differ From The Written Title Lines, Or
(4) Relative Positional Precision. Of These Four Sources Of Uncertainty, Only Relative
positional Precision Is Controllable, Although, Due To The Inherent Errors In Any Measurement,
it Cannot Be Eliminated. The Magnitude Of The First Three Uncertainties Can Be Projected Based
on Evidence; Relative Positional Precision Is Estimated Using Statistical Means (see Section
3.e.i. Above And Section 3.e.v. Below).
iii. The First Three Of These Sources Of Uncertainty Must Be Weighed As Part Of The Evidence In The
determination Of Where, In The Surveyor S Opinion, The Boundary Lines And Corners Of The
surveyed Property Should Be Located (see Section 3.d. Above). Relative Positional Precision
is A Measure Of How Precisely The Surveyor Is Able To Monument And Report Those Positions; It
is Not A Substitute For The Application Of Proper Boundary Law Principles. A Boundary Corner Or
line May Have A Small Relative Positional Precision Because The Survey Measurements Were
precise, Yet Still Be In The Wrong Position (i.e., Inaccurate) If It Was Established Or Retraced
using Faulty Or Improper Application Of Boundary Law Principles.
iv. For Any Measurement Technology Or Procedure Used On An Alta/nsps Land Title Survey,
the Surveyor Must (1) Use Appropriately Trained Personnel, (2) Compensate For Systematic
errors, Including Those Associated With Instrument Calibration, And (3) Use Appropriate Error
propagation And Measurement Design Theory (selecting The Proper Instruments, Geometric
layouts, And Field And Computational Procedures) To Control Random Errors Such That The
maximum Allowable Relative Positional Precision Outlined In Section 3.e.v. Below Is Not
exceeded.
v. The Maximum Allowable Relative Positional Precision For An Alta/nsps Land Title Survey Is
2 Cm (0.07 Feet) Plus 50 Parts Per Million (based On The Direct Distance Between The Two
american Land Title Associationâ® (alta) Minimum Standard Detail Requirements
national Society Of Professional Surveyors (nsps) For Alta/nsps Land Title Surveys
copyright 2021. All Rights Reserved. Page 3 Of 10
american Land Title Association And
national Society Of Professional Surveyors
corners Being Tested). It Is Recognized That In Certain Circumstances, The Size Or Configuration
of The Surveyed Property, Or The Relief, Vegetation, Or Improvements On The Surveyed Property,
will Result In Survey Measurements For Which The Maximum Allowable Relative Positional
precision May Be Exceeded In Which Case The Reason Shall Be Noted Pursuant To Section
6.b.x. Below.
4. Records Research - It Is Recognized That For The Performance Of An Alta/nsps Land Title
survey, The Surveyor Will Be Provided With Appropriate And, When Possible, Legible Data That Can
be Relied Upon In The Preparation Of The Survey. In Order To Complete An Alta/nsps Land Title
survey, The Surveyor Must Be Provided With The Following:
a. The Current Record Description Of The Real Property To Be Surveyed Or, In The Case Of An
original Survey Prepared For Purposes Of Locating And Describing Real Property That Has Not
been Previously Separately Described In Documents Conveying An Interest In The Real Property,
the Current Record Description Of The Parent Parcel That Contains The Property To Be Surveyed;
b. Complete Copies Of The Most Recent Title Commitment Or, If A Title Commitment Is Not Available,
other Title Evidence Satisfactory To The Title Insurer;
c. The Following Documents From Records Established Under State Statutes For The Purpose Of
imparting Constructive Notice Of Matters Relating To Real Property (public Records):
i. The Current Record Descriptions Of Any Adjoiners To The Property To Be Surveyed, Except
where Such Adjoiners Are Lots In Platted, Recorded Subdivisions;
ii. Any Recorded Easements Benefitting The Property To Be Surveyed; And
iii. Any Recorded Easements, Servitudes, Or Covenants Burdening The Property To Be
surveyed; And
d. If Desired By The Client, Any Unrecorded Documents Affecting The Property To Be Surveyed And
containing Information To Which The Survey Shall Make Reference.
except, However, If The Documents Outlined In This Section Are Not Provided To The Surveyor Or If Non-public
or Quasi-public Documents Are Otherwise Required To Complete The Survey, The Surveyor Must Conduct That
research Which Is Required Pursuant To The Statutory Or Administrative Requirements Of The Jurisdiction
where The Surveyed Property Is Located And That Research (if Any) Which Is Negotiated And Outlined In The
terms Of The Contract Between The Surveyor And The Client.
5. Fieldwork - The Survey Must Be Performed On The Ground (except As May Be Otherwise
negotiated Pursuant To Table A, Item 15 Below). Except As Related To The Precision Of The Boundary, Which
is Addressed In Section 3.e. Above, Features Located During The Fieldwork Shall Be Located To What Is, In The
surveyor S Professional Opinion, The Appropriate Degree Of Precision Based On (a) The Planned Use Of The
surveyed Property, If Reported In Writing To The Surveyor By The Client, Lender, Or Insurer, Or (b) The Existing
use, If The Planned Use Is Not So Reported. The Fieldwork Shall Include The Following:
a. Monuments
i. The Location, Size, Character, And Type Of Any Monuments Found During The Fieldwork.
ii. The Location, Size, Character, And Type Of Any Monuments Set During The Fieldwork, If Item 1 Of
table A Was Selected Or If Otherwise Required By Applicable Jurisdictional Requirements And/or
standards Of Practice.
iii. The Location, Description, And Character Of Any Lines That Control The Boundaries Of The
surveyed Property.
b. Rights Of Way And Access
i. The Distance From The Appropriate Corner Or Corners Of The Surveyed Property To The Nearest
right Of Way Line, If The Surveyed Property Does Not Abut A Right Of Way.
ii. The Name Of Any Street, Highway, Or Other Public Or Private Way Abutting The Surveyed
property, Together With The Width Of The Travelled Way And The Location Of Each Edge Of The
travelled Way Including On Divided Streets And Highways. If The Documents Provided To Or
obtained By The Surveyor Pursuant To Section 4 Indicate No Access From The Surveyed
property To The Abutting Street Or Highway, The Width And Location Of The Travelled Way Need
not Be Located.
american Land Title Associationâ® (alta) Minimum Standard Detail Requirements
national Society Of Professional Surveyors (nsps) For Alta/nsps Land Title Surveys
copyright 2021. All Rights Reserved. Page 4 Of 10
american Land Title Association And
national Society Of Professional Surveyors
iii. Visible Evidence Of Physical Access (e.g., Curb Cuts, Driveways) To Any Abutting Streets,
highways, Or Other Public Or Private Ways.
iv. The Location And Character Of Vehicular, Pedestrian, Or Other Forms Of Access By Other Than
the Apparent Occupants Of The Surveyed Property To Or Across The Surveyed Property Observed
in The Process Of Conducting The Fieldwork (e.g., Driveways, Alleys, Private Roads, Railroads,
railroad Sidings And Spurs, Sidewalks, Footpaths).
v. Without Expressing A Legal Opinion As To Ownership Or Nature, The Location And Extent Of Any
potentially Encroaching Driveways, Alleys, And Other Ways Of Access From Adjoining Properties
onto The Surveyed Property Observed In The Process Of Conducting The Fieldwork.
vi. Where Documentation Of The Location Of Any Street, Road, Or Highway Right Of Way Abutting, On,
or Crossing The Surveyed Property Was Not Disclosed In Documents Provided To Or Obtained By
the Surveyor, Or Was Not Otherwise Available From The Controlling Jurisdiction (see Section
6.c.iv. Below), The Evidence And Location Of Parcel Corners On The Same Side Of The Street As
the Surveyed Property Recovered In The Process Of Conducting The Fieldwork Which May
indicate The Location Of Such Right Of Way Lines (e.g., Lines Of Occupation, Survey Monuments).
vii. Evidence Of Access To And From Waters Adjoining The Surveyed Property Observed In The
process Of Conducting The Fieldwork (e.g., Paths, Boat Slips, Launches, Piers, Docks).
c. Lines Of Possession And Improvements Along The Boundaries
i. The Character And Location Of Evidence Of Possession Or Occupation Along The Perimeter Of
the Surveyed Property, Both By The Occupants Of The Surveyed Property And By Adjoiners,
observed In The Process Of Conducting The Fieldwork.
ii. Unless Physical Access Is Restricted, The Character And Location Of All Walls, Buildings, Fences,
and Other Improvements Within Five Feet Of Each Side Of The Boundary Lines Observed In The
process Of Conducting The Fieldwork (see Section 5.e.iv. Regarding Utility Poles). Trees,
bushes, Shrubs, And Other Vegetation Need Not Be Located Other Than As Specified In The
contract, Unless They Are Deemed By The Surveyor To Be Evidence Of Possession Or Occupation
pursuant To Section 5.c.i.
iii. Without Expressing A Legal Opinion As To The Ownership Or Nature Of The Potential
encroachment, The Evidence, Location, And Extent Of Potentially Encroaching Structural
appurtenances And Projections Observed In The Process Of Conducting The Fieldwork (e.g., Fire
escapes, Bay Windows, Windows And Doors That Open Out, Flue Pipes, Stoops, Eaves, Cornices,
areaways, Steps, Trim) By Or Onto Adjoining Property, Or Onto Rights Of Way, Easements, Or
setback Lines Disclosed In Documents Provided To Or Obtained By The Surveyor.
d. Buildings
the Location Of Buildings On The Surveyed Property Observed In The Process Of Conducting The
fieldwork.
e. Easements And Servitudes
i. Evidence Of Any Easements Or Servitudes Burdening The Surveyed Property As Disclosed In
the Documents Provided To Or Obtained By The Surveyor Pursuant To Section 4 And Observed In
the Process Of Conducting The Fieldwork.
ii. Evidence Of Easements, Servitudes, Or Other Uses By Other Than The Apparent Occupants Of
the Surveyed Property Not Disclosed In The Documents Provided To Or Obtained By The Surveyor
pursuant To Section 4, But Observed In The Process Of Conducting The Fieldwork If They Are On
or Across The Surveyed Property (e.g., Roads, Drives, Sidewalks, Paths And Other Ways Of
access, Utility Service Lines, Utility Locate Markings (including The Source Of The Markings, With
a Note If Unknown), Water Courses, Ditches, Drains, Telephone Lines, Fiber Optic Lines, Electric
lines, Water Lines, Sewer Lines, Oil Pipelines, Gas Pipelines).
iii. Surface Indications Of Underground Easements Or Servitudes On Or Across The Surveyed
property Observed In The Process Of Conducting The Fieldwork (e.g., Utility Cuts, Vent Pipes,
filler Pipes, Utility Locate Markings (including The Source Of The Markings, With A Note If
unknown)).
iv. Evidence On Or Above The Surface Of The Surveyed Property Observed In The Process Of
american Land Title Associationâ® (alta) Minimum Standard Detail Requirements
national Society Of Professional Surveyors (nsps) For Alta/nsps Land Title Surveys
copyright 2021. All Rights Reserved. Page 5 Of 10
american Land Title Association And
national Society Of Professional Surveyors
conducting The Fieldwork, Which Evidence May Indicate Utilities Located On, Over, Or Beneath
the Surveyed Property. Examples Of Such Evidence Include Pipeline Markers, Utility Locate
markings (including The Source Of The Markings, With A Note If Unknown), Manholes, Valves,
meters, Transformers, Pedestals, Clean-outs, Overhead Lines, Guy Wires, And Utility Poles On Or
within Ten Feet Of The Surveyed Property. Without Expressing A Legal Opinion As To The
ownership Or Nature Of The Potential Encroachment, The Extent Of All Encroaching Utility Pole
crossmembers Or Overhangs.
f. Cemeteries
as Accurately As The Evidence Permits, The Perimeter Of Cemeteries And Burial Grounds, And The
location Of Isolated Gravesites Not Within A Cemetery Or Burial Ground, (i) Disclosed In The
documents Provided To Or Obtained By The Surveyor, Or (ii) Observed In The Process Of Conducting
the Fieldwork.
g. Water Features
i. The Location Of Springs, Ponds, Lakes, Streams, Rivers, Canals, Ditches, Marshes, And Swamps
on, Running Through, Or Outside, But Within Five Feet Of, The Perimeter Boundary Of The Surveyed
property And Observed During The Process Of Conducting The Fieldwork.
ii. The Location Of Any Water Feature Forming A Boundary Of The Surveyed Property. The
attribute(s) Of The Water Feature Located (e.g., Top Of Bank, Edge Of Water, High Water Mark)
should Be Congruent With The Boundary As Described In The Record Description Or, In The Case
of An Original Survey, In The New Description (see Section 6.b.vi. Below).
6. Plat Or Map - A Plat Or Map Of An Alta/nsps Land Title Survey Shall Show The Following
information. Where Dimensioning Is Appropriate, Dimensions Shall Be Annotated To What Is, In The
surveyor S Professional Opinion, The Appropriate Degree Of Precision Based On (a) The Planned Use Of The
surveyed Property, If Reported In Writing To The Surveyor By The Client, Lender, Or Insurer, Or (b) Existing Use,
if The Planned Use Is Not So Reported.
a. Field Locations. The Evidence And Locations Gathered, And The Monuments And Lines Located
during The Fieldwork Pursuant To Section 5 Above, With Accompanying Notes If Deemed Necessary
by The Surveyor Or As Otherwise Required As Specified Below.
b. Boundary, Descriptions, Dimensions, And Closures
i. (a) The Current Record Description Of The Surveyed Property, Or
(b) In The Case Of An Original Survey, The Current Record Document Number Of The Parent Tract
that Contains The Surveyed Property.
ii. Any New Description Of The Surveyed Property That Was Prepared In Conjunction With The
survey, Including A Statement Explaining Why The New Description Was Prepared. Except In The
case Of An Original Survey, Preparation Of A New Description Should Be Avoided Unless
deemed Necessary Or Appropriate By The Surveyor And Insurer. Preparation Of A New
description Should Also Generally Be Avoided When The Record Description Is A Lot Or Block In A
platted, Recorded Subdivision. Except In The Case Of An Original Survey, If A New Description Is
prepared, A Note Must Be Provided Stating (a) That The New Description Describes The Same
real Estate As The Record Description Or, (b) If It Does Not, How The New Description Differs From
the Record Description.
iii. The Point Of Beginning, The Remote Point Of Beginning Or Point Of Commencement (if
applicable) And All Distances And Directions Identified In The Record Description Of The
surveyed Property (and In The New Description, If One Was Prepared). Where A Measured Or
calculated Dimension Differs From The Record By An Amount Deemed Significant By The
surveyor, Such Dimension Must Be Shown In Addition To, And Differentiated From, The
corresponding Record Dimension. All Dimensions Shown On The Survey And Contained In Any
new Description Must Be Horizontal Ground Dimensions Unless Otherwise Noted.
iv. The Direction, Distance, And Curve Data Necessary To Compute A Mathematical Closure Of The
surveyed Boundary. A Note If The Record Description Does Not Mathematically Close. The Basis
of Bearings And, Where It Differs From The Record Basis, The Difference.
v. The Remainder Of Any Recorded Lot Or Existing Parcel, When The Surveyed Property Is
american Land Title Associationâ® (alta) Minimum Standard Detail Requirements
national Society Of Professional Surveyors (nsps) For Alta/nsps Land Title Surveys
copyright 2021. All Rights Reserved. Page 6 Of 10
american Land Title Association And
national Society Of Professional Surveyors
composed Of Only A Portion Of Such Lot Or Parcel, Shall Be Graphically Depicted. Such
remainder Need Not Be Included As Part Of The Actual Survey, Except To The Extent Necessary
to Locate The Lines And Corners Of The Surveyed Property, And It Need Not Be Fully Dimensioned
or Drawn At The Same Scale As The Surveyed Property.
vi. When The Surveyed Property Includes A Title Line Defined By A Water Boundary, A Note On The
face Of The Plat Or Map Noting The Date The Boundary Was Measured, Which Attribute(s) Of The
water Feature Was/were Located, And The Caveat That The Boundary Is Subject To Change Due To
natural Causes And That It May Or May Not Represent The Actual Location Of The Limit Of Title.
when The Surveyor Is Aware Of Natural Or Artificial Realignments Or Changes In Such
boundaries, The Extent Of Those Changes And Facts Shall Be Shown Or Explained.
vii. The Relationship Of The Boundaries Of The Surveyed Property To Its Adjoiners (e.g., Contiguity,
gaps, Overlaps) Where Ascertainable From Documents Provided To Or Obtained By The Surveyor
pursuant To Section 4 And/or From Field Evidence Gathered During The Process Of Conducting
the Fieldwork. If The Surveyed Property Is Composed Of Multiple Parcels, The Extent Of Any Gaps
or Overlaps Between Those Parcels Must Be Identified. Where Gaps Or Overlaps Are Identified,
the Surveyor Must, Prior To Or Upon Delivery Of The Final Plat Or Map, Disclose This To The Insurer
and Client.
viii. When, In The Opinion Of The Surveyor, The Results Of The Survey Differ Significantly From The
record, Or If A Fundamental Decision Related To The Boundary Resolution Is Not Clearly Reflected
on The Plat Or Map, The Surveyor Must Explain This Information With Notes On The Face Of The
plat Or Map.
ix. The Location Of Buildings On The Surveyed Property Dimensioned Perpendicular To Those
perimeter Boundary Lines That The Surveyor Deems Appropriate (i.e., Where Potentially
impacted By A Setback Line) And/or As Requested By The Client, Lender Or Insurer.
x. A Note On The Face Of The Plat Or Map Explaining The Site Conditions That Resulted In A Relative
positional Precision That Exceeds The Maximum Allowed Pursuant To Section 3.e.v.
xi. A Note On The Face Of The Plat Or Map Identifying Areas, If Any, On The Boundaries Of The
surveyed Property, To Which Physical Access Within Five Feet Was Restricted (see Section
5.c.ii.).
xii. A Note On The Face Of The Plat Or Map Identifying The Source Of The Title Commitment Or Other
title Evidence Provided Pursuant To Section 4, And The Effective Date And The Name Of The
insurer Of Same.
c. Easements, Servitudes, Rights Of Way, Access, And Documents
i. The Location, Width, And Recording Information Of All Plottable Rights Of Way, Easements, And
servitudes Burdening And Benefitting The Surveyed Property, As Evidenced By Documents
provided To Or Obtained By The Surveyor Pursuant To Section 4.
ii. A Summary Of All Rights Of Way, Easements, And Other Survey-related Matters Burdening The
surveyed Property And Identified In The Title Evidence Provided To Or Obtained By The Surveyor
pursuant To Section 4. Such Summary Must Include The Record Information Of Each Such Right
of Way, Easement, Or Other Survey-related Matter, A Statement Indicating Whether It Lies Within
or Crosses The Surveyed Property, And A Related Note If:
(a) Its Location Is Shown;
(b) Its Location Cannot Be Determined From The Record Document;
(c) There Was No Observed Evidence At The Time Of The Fieldwork;
(d) It Is A Blanket Easement;
(e) It Is Not On, Does Not Touch, And/or Based On The Description Contained In The Record
document Does Not Affect, The Surveyed Property;
(f) It Limits Access To An Otherwise Abutting Right Of Way;
(g) The Documents Are Illegible; Or
(h) The Surveyor Has Information Indicating That It May Have Been Released Or Otherwise
terminated.
in Cases Where The Surveyed Property Is Composed Of Multiple Parcels, Indicate Which Of Such
american Land Title Associationâ® (alta) Minimum Standard Detail Requirements
national Society Of Professional Surveyors (nsps) For Alta/nsps Land Title Surveys
copyright 2021. All Rights Reserved. Page 7 Of 10
american Land Title Association And
national Society Of Professional Surveyors
parcels The Various Rights Of Way, Easements, And Other Survey-related Matters Cross Or
touch.
iii. A Note If No Physical Access To An Abutting Street, Highway, Or Other Public Or Private Way Was
observed In The Process Of Conducting The Fieldwork.
iv. The Locations And Widths Of Rights Of Way Abutting Or Crossing The Surveyed Property And The
source Of Such Information (a) Where Available From The Controlling Jurisdiction, Or (b) Where
disclosed In Documents Provided To Or Obtained By The Surveyor Pursuant To Section 4.
v. The Identifying Titles Of All Recorded Plats, Filed Maps, Right Of Way Maps, Or Similar Documents
that The Survey Represents, Wholly Or In Part, With Their Recording Or Filing Data.
vi. For Non-platted Adjoining Land, Recording Data And, Where Available, Tax Parcel Number,
identifying Adjoining Tracts According To Current Public Records. For Platted Adjoining Land, The
recording Data Of The Subdivision Plat.
vii. Platted Setback Or Building Restriction Lines That Appear On Recorded Subdivision Plats Or That
were Disclosed In Documents Provided To, Or Obtained By, The Surveyor.
viii. If In The Process Of Preparing The Survey The Surveyor Becomes Aware Of A Recorded
easement Not Otherwise Listed In The Title Evidence Provided, The Surveyor Must Advise The
insurer Prior To Delivery Of The Plat Or Map And, Unless The Insurer Provides Evidence Of A
release Of That Easement, Show Or Otherwise Explain It On The Face Of The Plat Or Map, With A
note That The Insurer Has Been Advised.
d. Presentation
i. The Plat Or Map Must Be Drawn On A Sheet Of Not Less Than 8 ½ By 11 Inches In Size At A
legible, Standard Engineering Scale, With That Scale Clearly Indicated In Words Or Numbers And
with A Graphic Scale.
ii. The Plat Or Map Must Include:
(a) The Boundary Of The Surveyed Property Drawn In A Manner That Distinguishes It From Other
lines On The Plat Or Map.
(b) If No Buildings Were Observed On The Surveyed Property In The Process Of Conducting The
fieldwork, A Note Stating No Buildings Observed.
(c) A North Arrow (with North To The Top Of The Drawing When Practicable).
(d) A Legend Of Symbols And Abbreviations.
(e) A Vicinity Map Showing The Surveyed Property In Reference To Nearby Highway(s) Or Major
street Intersection(s).
(f) Supplementary Or Detail Diagrams When Necessary.
(g) Notes Explaining Any Modifications To Table A Items And The Nature Of Any Additional
table A Items (e.g., 20(a), 20(b), 20(c)) That Were Negotiated Between The Surveyor And
client.
(h) The Surveyor S Project Number (if Any), And The Name, Registration Or License Number,
signature, Seal, Street Address, Telephone Number, Company Website, And Email Address
(if Any) Of The Surveyor Who Performed The Survey.
(i) The Date(s) Of Any Revisions Made By The Surveyor Who Performed The Survey.
(j) Sheet Numbers Where The Plat Or Map Is Composed Of More Than One Sheet.
(k) The Caption Alta/nsps Land Title Survey.
iii. When Recordation Or Filing Of A Plat Or Map Is Required By State Statutes Or Local Ordinances,
such Plat Or Map Shall Be Produced In The Required Form.
7. Certification - The Plat Or Map Of An Alta/nsps Land Title Survey Must Bear Only The Following
unaltered Certification Except As May Be Required Pursuant To Section 3.b. Above:
to (name Of Insured, If Known), (name Of Lender, If Known), (name Of Insurer, If Known), (names Of
others As Negotiated With The Client):
this Is To Certify That This Map Or Plat And The Survey On Which It Is Based Were Made In
accordance With The 2021 Minimum Standard Detail Requirements For Alta/nsps Land Title
american Land Title Associationâ® (alta) Minimum Standard Detail Requirements
national Society Of Professional Surveyors (nsps) For Alta/nsps Land Title Surveys
copyright 2021. All Rights Reserved. Page 8 Of 10
american Land Title Association And
national Society Of Professional Surveyors
surveys, Jointly Established And Adopted By Alta And Nsps, And Includes Items ___________
of Table A Thereof. The Fieldwork Was Completed On ___________ [date].
date Of Plat Or Map: ___________ (surveyor S Signature, Printed Name And Seal With
registration/license Number)
8. Deliverables - The Surveyor Shall Furnish Copies Of The Plat Or Map Of Survey To The Insurer And
client And As Otherwise Negotiated With The Client. Hard Copies Shall Be On Durable And Dimensionally
stable Material Of A Quality Standard Acceptable To The Insurer. A Digital Image Of The Plat Or Map May Be
provided In Addition To, Or In Lieu Of, Hard Copies Pursuant To The Terms Of The Contract. If The Surveyor Is
required To Record Or File A Plat Or Map Pursuant To State Statute Or Local Ordinance It Shall Be So Recorded
or Filed.
american Land Title Associationâ® (alta) Minimum Standard Detail Requirements
national Society Of Professional Surveyors (nsps) For Alta/nsps Land Title Surveys
copyright 2021. All Rights Reserved. Page 9 Of 10
american Land Title Association And
national Society Of Professional Surveyors
table A
optional Survey Responsibilities And Specifications
note: Whether Any Of The Nineteen (19) Items Of Table A Are To Be Selected, And The Exact Wording Of
and Fee For Any Selected Item, May Be Negotiated Between The Surveyor And Client. Any Additional Items
negotiated Between The Surveyor And Client Must Be Identified As 20(a), 20(b), Etc. Any Additional Items
negotiated Between The Surveyor And Client, And Any Negotiated Changes To The Wording Of A Table A
item, Must Be Explained Pursuant To Section 6.d.ii.(g). Notwithstanding Table A Items 5 And 11, If An
engineering Design Survey Is Desired As Part Of An Alta/nsps Land Title Survey, Such Services Should
be Negotiated Under Table A, Item 20.
if Checked, The Following Optional Items Are To Be Included In The Alta/nsps Land Title Survey,
except As Otherwise Qualified (see Note Above):
1. ___x__ Monuments Placed (or A Reference Monument Or Witness To The Corner) At All Major
corners Of The Boundary Of The Surveyed Property, Unless Already Marked Or Referenced By Existing
monuments Or Witnesses In Close Proximity To The Corner.
2. _____ Address(es) Of The Surveyed Property If Disclosed In Documents Provided To Or Obtained
by The Surveyor, Or Observed While Conducting The Fieldwork.
3. _____ Flood Zone Classification (with Proper Annotation Based On Federal Flood Insurance Rate
maps Or The State Or Local Equivalent) Depicted By Scaled Map Location And Graphic Plotting Only.
4. __ X __ Gross Land Area (and Other Areas If Specified By The Client).
5. __#5__ Vertical Relief With The Source Of Information (e.g., Ground Survey, Aerial Map), Contour
interval, Datum, With Originating Benchmark, When Appropriate.
6. _____ (a) If The Current Zoning Classification, Setback Requirements, The Height And Floor Space
area Restrictions, And Parking Requirements Specific To The Surveyed Property Are Set Forth In A Zoning
report Or Letter Provided To The Surveyor By The Client Or The Client S Designated Representative, List The
above Items On The Plat Or Map And Identify The Date And Source Of The Report Or Letter.
_____ (b) If The Zoning Setback Requirements Specific To The Surveyed Property Are Set Forth In A
zoning Report Or Letter Provided To The Surveyor By The Client Or The Client S Designated Representative,
and If Those Requirements Do Not Require An Interpretation By The Surveyor, Graphically Depict Those
requirements On The Plat Or Map And Identify The Date And Source Of The Report Or Letter.
7. __ X __ (a) Exterior Dimensions Of All Buildings At Ground Level.
(b) Square Footage Of:
__ X __ (1) Exterior Footprint Of All Buildings At Ground Level.
_____ (2) Other Areas As Specified By The Client.
_____ (c) Measured Height Of All Buildings Above Grade At A Location Specified By The Client. If No
location Is Specified, The Point Of Measurement Shall Be Identified.
8. _____ Substantial Features Observed In The Process Of Conducting The Fieldwork (in Addition To
the Improvements And Features Required Pursuant To Section 5 Above) (e.g., Parking Lots, Billboards,
signs, Swimming Pools, Landscaped Areas, Substantial Areas Of Refuse).
9. _____ Number And Type (e.g., Disabled, Motorcycle, Regular, And Other Marked Specialized
types) Of Clearly Identifiable Parking Spaces On Surface Parking Areas, Lots, And In Parking Structures.
striping Of Clearly Identifiable Parking Spaces On Surface Parking Areas And Lots.
american Land Title Associationâ® (alta) Minimum Standard Detail Requirements
national Society Of Professional Surveyors (nsps) For Alta/nsps Land Title Surveys
copyright 2021. All Rights Reserved. Page 10 Of 10
american Land Title Association And
national Society Of Professional Surveyors
10. _____ As Designated By The Client, A Determination Of The Relationship And Location Of Certain
division Or Party Walls With Respect To Adjoining Properties.
11. Evidence Of Underground Utilities Existing On Or Serving The Surveyed Property (in Addition To The
observed Evidence Of Utilities Required Pursuant To Section 5.e.iv.) As Determined By:
_____ (a) Plans And/or Reports Provided By Client (with Reference As To The Sources Of Information)
_____ (b) Markings Coordinated By The Surveyor Pursuant To A Private Utility Locate Request.
note To The Client, Insurer, And Lender With Regard To Table A, Item 11, Information From The Sources
checked Above Will Be Combined With Observed Evidence Of Utilities Pursuant To Section 5.e.iv. To
develop A View Of The Underground Utilities. However, Lacking Excavation, The Exact Location Of
underground Features Cannot Be Accurately, Completely, And Reliably Depicted. In Addition, In Some
jurisdictions, 811 Or Other Similar Utility Locate Requests From Surveyors May Be Ignored Or Result In An
incomplete Response, In Which Case The Surveyor Shall Note On The Plat Or Map How This Affected The
surveyor S Assessment Of The Location Of The Utilities. Where Additional Or More Detailed Information Is
required, The Client Is Advised That Excavation May Be Necessary.
12. __ X __ As Specified By The Client, Governmental Agency Survey-related Requirements (e.g., Hud
surveys, Surveys For Leases On Bureau Of Land Management Managed Lands). The Relevant Survey
requirements Are To Be Provided By The Client Or Client S Designated Representative.
13. _____ Names Of Adjoining Owners According To Current Tax Records. If More Than One Owner,
identify The First Owner S Name Listed In The Tax Records Followed By Et Al.
14. _____ As Specified By The Client, Distance To The Nearest Intersecting Street.
15. _#5__ Rectified Orthophotography, Photogrammetric Mapping, Remote Sensing, Airborne/mobile
laser Scanning And Other Similar Products, Tools Or Technologies As The Basis For Showing The Location Of
certain Features (excluding Boundaries) Where Ground Measurements Are Not Otherwise Necessary To
locate Those Features To An Appropriate And Acceptable Accuracy Relative To A Nearby Boundary. The
surveyor Must (a) Discuss The Ramifications Of Such Methodologies (e.g., The Potential Precision And
completeness Of The Data Gathered Thereby) With The Insurer, Lender, And Client Prior To The Performance
of The Survey, And (b) Place A Note On The Face Of The Survey Explaining The Source, Date, Precision, And
other Relevant Qualifications Of Any Such Data.
16. _____ Evidence Of Recent Earth Moving Work, Building Construction, Or Building Additions
observed In The Process Of Conducting The Fieldwork.
17. _____ Proposed Changes In Street Right Of Way Lines, If Such Information Is Made Available To The
surveyor By The Controlling Jurisdiction. Evidence Of Recent Street Or Sidewalk Construction Or Repairs
observed In The Process Of Conducting The Fieldwork.
18. __x__ Pursuant To Sections 5 And 6 (and Applicable Selected Table A Items, Excluding Table A
item 1), Include As Part Of The Survey Any Plottable Offsite (i.e., Appurtenant) Easements Disclosed In
documents Provided To Or Obtained By The Surveyor.
19. _____ Professional Liability Insurance Policy Obtained By The Surveyor In The Minimum Amount Of
$____________ To Be In Effect Throughout The Contract Term. Certificate Of Insurance To Be Furnished
upon Request, But This Item Shall Not Be Addressed On The Face Of The Plat Or Map.
20. _____ ___________________________________________________________________
adopted By The American Land Title Association On October 1, 2020. More At: Www.alta.org.
adopted By The National Society Of Professional Surveyors On October 30, 2020. More At: Www.nsps.us.com.
11/16/2023
attachment 2 - Example Survey Marker
2.5 Minimum Diameter
bronze
mountable On New Precast Monument, Existing Concrete Or Rebar Pin
Closing Date17 Jul 2024
Tender AmountRefer Documents
Bureau Of Corrections Muntinlupa City Metro Manila Tender
Aerospace and Defence
Philippines
Details: Description Republic Of The Philippines Department Of Justice Bureau Of Corrections Muntinlupa City Bids And Awards Committee Bidding Documents For The Supply And Delivery Of Various Military Equipment For Bucor Swat (procurement/id No.04) Sixth Edition July 2020 Table Of Contents Glossary Of Acronyms, Terms, And Abbreviations ………………………….2 Section I. Invitation To Bid……………………………………………………..5 Section Ii. Instructions To Bidders…………………………………………...8 1. Scope Of Bid ………………………………………………………………………. 9 2. Funding Information………………………………………………………………. 9 3. Bidding Requirements ……………………………………………………………. 9 4. Corrupt, Fraudulent, Collusive, And Coercive Practices………………………….. 9 5. Eligible Bidders…………………………………………………………………… 10 6. Origin Of Goods ………………………………………………………………….. 10 7. Subcontracts ……………………………………………………………………… 10 8. Pre-bid Conference ………………………………………………………………. 11 9. Clarification And Amendment Of Bidding Documents …………………………… 11 10. Documents Comprising The Bid: Eligibility And Technical Components …………. 11 11. Documents Comprising The Bid: Financial Component …………………………... 11 12. Bid Prices …………………………………………………………………………. 12 13. Bid And Payment Currencies ……………………………………………………… 12 14. Bid Security ………………………………………………………………………. 12 15. Sealing And Marking Of Bids ……………………………………………………… 13 16. Deadline For Submission Of Bids …………………………………………………. 13 17. Opening And Preliminary Examination Of Bids ………………………………….. 13 18. Domestic Preference ……………………………………………………………… 13 19. Detailed Evaluation And Comparison Of Bids ……………………………………. 14 20. Post-qualification ………………………………………………………………… 14 21. Signing Of The Contract …………………………………………………………… 14 Section Iii. Bid Data Sheet …………………………………………………..15 Section Iv. General Conditions Of Contract ……………………...………..17 1. Scope Of Contract ………………………………………………………………… 18 2. Advance Payment And Terms Of Payment ……………………………………….. 18 3. Performance Security ……………………………………………………………. 18 4. Inspection And Tests ……………………………………………………………… 18 5. Warranty …………………………………………………………………………. 19 6. Liability Of The Supplier ………………………………………………………….. 19 Section V. Special Conditions Of Contract ………………………………….20 Section Vi. Schedule Of Requirements ……………………………………....23 Section Vii. Technical Specifications …………………………………………24 Section Viii. Checklist Of Technical And Financial Documents …………..29 Glossary Of Acronyms, Terms, And Abbreviations Abc – Approved Budget For The Contract. Bac – Bids And Awards Committee. Bid – A Signed Offer Or Proposal To Undertake A Contract Submitted By A Bidder In Response To And In Consonance With The Requirements Of The Bidding Documents. Also Referred To As Proposal And Tender. (2016 Revised Irr, Section 5[c]) Bidder – Refers To A Contractor, Manufacturer, Supplier, Distributor And/or Consultant Who Submits A Bid In Response To The Requirements Of The Bidding Documents. (2016 Revised Irr, Section 5[d]) Bidding Documents – The Documents Issued By The Procuring Entity As The Bases For Bids, Furnishing All Information Necessary For A Prospective Bidder To Prepare A Bid For The Goods, Infrastructure Projects, And/or Consulting Services Required By The Procuring Entity. (2016 Revised Irr, Section 5[e]) Bir – Bureau Of Internal Revenue. Bsp – Bangko Sentral Ng Pilipinas. Consulting Services – Refer To Services For Infrastructure Projects And Other Types Of Projects Or Activities Of The Gop Requiring Adequate External Technical And Professional Expertise That Are Beyond The Capability And/or Capacity Of The Gop To Undertake Such As, But Not Limited To: (i) Advisory And Review Services; (ii) Pre-investment Or Feasibility Studies; (iii) Design; (iv) Construction Supervision; (v) Management And Related Services; And (vi) Other Technical Services Or Special Studies. (2016 Revised Irr, Section 5[i]) Cda - Cooperative Development Authority. Contract – Refers To The Agreement Entered Into Between The Procuring Entity And The Supplier Or Manufacturer Or Distributor Or Service Provider For Procurement Of Goods And Services; Contractor For Procurement Of Infrastructure Projects; Or Consultant Or Consulting Firm For Procurement Of Consulting Services; As The Case May Be, As Recorded In The Contract Form Signed By The Parties, Including All Attachments And Appendices Thereto And All Documents Incorporated By Reference Therein. Cif – Cost Insurance And Freight. Cip – Carriage And Insurance Paid. Cpi – Consumer Price Index. Ddp – Refers To The Quoted Price Of The Goods, Which Means “delivered Duty Paid.” Dti – Department Of Trade And Industry. Exw – Ex Works. Fca – “free Carrier” Shipping Point. Fob – “free On Board” Shipping Point. Foreign-funded Procurement Or Foreign-assisted Project– Refers To Procurement Whose Funding Source Is From A Foreign Government, Foreign Or International Financing Institution As Specified In The Treaty Or International Or Executive Agreement. (2016 Revised Irr, Section 5[b]). Framework Agreement – Refers To A Written Agreement Between A Procuring Entity And A Supplier Or Service Provider That Identifies The Terms And Conditions, Under Which Specific Purchases, Otherwise Known As “call-offs,” Are Made For The Duration Of The Agreement. It Is In The Nature Of An Option Contract Between The Procuring Entity And The Bidder(s) Granting The Procuring Entity The Option To Either Place An Order For Any Of The Goods Or Services Identified In The Framework Agreement List Or Not Buy At All, Within A Minimum Period Of One (1) Year To A Maximum Period Of Three (3) Years. (gppb Resolution No. 27-2019) Gfi – Government Financial Institution. Gocc – Government-owned And/or –controlled Corporation. Goods – Refer To All Items, Supplies, Materials And General Support Services, Except Consulting Services And Infrastructure Projects, Which May Be Needed In The Transaction Of Public Businesses Or In The Pursuit Of Any Government Undertaking, Project Or Activity, Whether In The Nature Of Equipment, Furniture, Stationery, Materials For Construction, Or Personal Property Of Any Kind, Including Non-personal Or Contractual Services Such As The Repair And Maintenance Of Equipment And Furniture, As Well As Trucking, Hauling, Janitorial, Security, And Related Or Analogous Services, As Well As Procurement Of Materials And Supplies Provided By The Procuring Entity For Such Services. The Term “related” Or “analogous Services” Shall Include, But Is Not Limited To, Lease Or Purchase Of Office Space, Media Advertisements, Health Maintenance Services, And Other Services Essential To The Operation Of The Procuring Entity. (2016 Revised Irr, Section 5[r]) Gop – Government Of The Philippines. Gppb – Government Procurement Policy Board. Incoterms – International Commercial Terms. Infrastructure Projects – Include The Construction, Improvement, Rehabilitation, Demolition, Repair, Restoration Or Maintenance Of Roads And Bridges, Railways, Airports, Seaports, Communication Facilities, Civil Works Components Of Information Technology Projects, Irrigation, Flood Control And Drainage, Water Supply, Sanitation, Sewerage And Solid Waste Management Systems, Shore Protection, Energy/power And Electrification Facilities, National Buildings, School Buildings, Hospital Buildings, And Other Related Construction Projects Of The Government. Also Referred To As Civil Works Or Works. (2016 Revised Irr, Section 5[u]) Lgus – Local Government Units. Nfcc – Net Financial Contracting Capacity. Nga – National Government Agency. Philgeps - Philippine Government Electronic Procurement System. Procurement Project – Refers To A Specific Or Identified Procurement Covering Goods, Infrastructure Project Or Consulting Services. A Procurement Project Shall Be Described, Detailed, And Scheduled In The Project Procurement Management Plan Prepared By The Agency Which Shall Be Consolidated In The Procuring Entity's Annual Procurement Plan. (gppb Circular No. 06-2019 Dated 17 July 2019) Psa – Philippine Statistics Authority. Sec – Securities And Exchange Commission. Slcc – Single Largest Completed Contract. Supplier – Refers To A Citizen, Or Any Corporate Body Or Commercial Company Duly Organized And Registered Under The Laws Where It Is Established, Habitually Established In Business And Engaged In The Manufacture Or Sale Of The Merchandise Or Performance Of The General Services Covered By His Bid. (item 3.8 Of Gppb Resolution No. 13-2019, Dated 23 May 2019). Supplier As Used In These Bidding Documents May Likewise Refer To A Distributor, Manufacturer, Contractor, Or Consultant. Un – United Nations. Section I. Invitation To Bid Invitation To Bid For The Supply, Delivery Of Various Military Equipment For Bucor Swat (bucor Procurement/id No.04 ) 1. The Bureau Of Corrections, Through The General Appropriations Act For 2023 Intends To Apply The Sum Of Being Ten Million Four Hundred Sixty Four Thousand Pesos (php 10,464,000.00) To Payments Under The Contract For 04. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Bucor Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within Fifteen (15) Calendar Days From The Receipt Of The Notice To Proceed. Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Bucor Bac Secretariat And Inspect The Bidding Documents At The Address Given Below During Mondays To Fridays (8:00 To 5:00 P.m.). 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On _february 13, 2024_____from The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 10,000.00. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees To Be Presented In Person At The Bucor Bac Secretariat. 6. The Bucor Will Hold A Pre-bid Conference On _february 21, 2024_ (2:30 P.m.) At Bucor Supply Division Conference Room Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below. Late Bids Shall Not Be Accepted 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On _march 5, 2024 (2:30 P.m.) At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Bucor Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Maria Adoracion I. Viñas Office Of The Bac Secretariat Supply Office, Bureau Of Corrections, Muntinlupa City Tel # 02-8809-8587/02-8478-0907 Bacsec2022@gmail.com 12. You May Visit The Following Websites: For Downloading Of Bidding Documents: Bucor.gov.ph Issued On _____ Day Of February 2024. Ccsupt. Celso S. Bravo Chairperson Bids And Awards Committee Certification The Schedule Of Requirements And Technical Specifications Are In Conformity With The Requirements Of The End-user Unit: This Procurement Project Is Covered By An Approved Annual Procurement Plan: Cinsp Nelson A Battad Chief, Bucor Swat End-user Representative Reviewed By: Maria Adoracion I. Vinas Head, Bac Secretariat Atty. Ceasar Anthony S. Solis, Mba, Cpa Chief, Budget Division Prepared By: Co1 Salvo, Grace L Co1 Bernales, Richelle Joy G Bac Secretariat Approved For Release By: William M. Terrado Head, Technical Working Group Section Ii. Instructions To Bidders 1. Scope Of Bid The Procuring Entity, Bureau Of Corrections Wishes To Receive Bids For The Supply And Delivery Of Various Military Equipments For Bucor Swat With Identification Number . [note: The Project Identification Number Is Assigned By The Procuring Entity Based On Its Own Coding Scheme And Is Not The Same As The Philgeps Reference Number, Which Is Generated After The Posting Of The Bid Opportunity On The Philgeps Website.] The Procurement Project (referred To Herein As “project”) Is Composed Of [indicate Number Of Lots Or Items], The Details Of Which Are Described In Section Vii (technical Specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding As Indicated Below For Gaa 2023 In The Amount Of Ten Millon Four Hundred Sixtyfour Thousand Pesos(10,464,000.00) 2.2. The Source Of Funding Is: Nga, The General Appropriations Act Or Special Appropriations. 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manuals And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Ib By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Verified And Accepted The General Requirements Of This Project, Including Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, And Coercive Practices The Procuring Entity, As Well As The Bidders And Suppliers, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. Foreign Ownership Exceeding Those Allowed Under The Rules May Participate Pursuant To: I. When A Treaty Or International Or Executive Agreement As Provided In Section 4 Of The Ra No. 9184 And Its 2016 Revised Irr Allow Foreign Bidders To Participate; Ii. Citizens, Corporations, Or Associations Of A Country, Included In The List Issued By The Gppb, The Laws Or Regulations Of Which Grant Reciprocal Rights Or Privileges To Citizens, Corporations, Or Associations Of The Philippines; Iii. When The Goods Sought To Be Procured Are Not Available From Local Suppliers; Or Iv. When There Is A Need To Prevent Situations That Defeat Competition Or Restrain Trade. A. Foreign Ownership Limited To Those Allowed Under The Rules May Participate In This Project. 5.3. Pursuant To Section 23.4.1.3 Of The 2016 Revised Irr Of Ra No.9184, The Bidder Shall Have An Slcc That Is At Least One (1) Contract Similar To The Project The Value Of Which, Adjusted To Current Prices Using The Psa’s Cpi, Must Be At Least Equivalent To: A. For The Procurement Of Non-expendable Supplies And Services: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Twenty Five Percent (25%) Of The Abc. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.1 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un, Subject To Domestic Preference Requirements Under Itb Clause 18. 7. Subcontracts 7.1. The Bidder May Subcontract Portions Of The Project To The Extent Allowed By The Procuring Entity As Stated Herein, But In No Case More Than Twenty Percent (20%) Of The Project. The Procuring Entity Has Prescribed That: Subcontracting Is Not Allowed. 8. Pre-bid Conference The Procuring Entity Will Hold A Pre-bid Conference For This Project On The Specified Date And Time And Either At Its Physical Address Bucor Supply Division Conference Room As Indicated In Paragraph 6 Of The Ib. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 10.2. The Bidder’s Slcc As Indicated In Itb Clause 5.3 Should Have Been Completed Within Three (3) Years Prior To The Deadline For The Submission And Receipt Of Bids. 10.3. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. Similar To The Required Authentication Above, For Contracting Parties To The Apostille Convention, Only The Translated Documents Shall Be Authenticated Through An Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 11.2. If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification Issued By Dti Shall Be Provided By The Bidder In Accordance With Section 43.1.3 Of The 2016 Revised Irr Of Ra No. 9184. 11.3. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.4. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 9184. 12. Bid Prices 12.1. Prices Indicated On The Price Schedule Shall Be Entered Separately In The Following Manner: A. For Goods Offered From Within The Procuring Entity’s Country: I. The Price Of The Goods Quoted Exw (ex-works, Ex-factory, Ex-warehouse, Ex-showroom, Or Off-the-shelf, As Applicable); Ii. The Cost Of All Customs Duties And Sales And Other Taxes Already Paid Or Payable; Iii. The Cost Of Transportation, Insurance, And Other Costs Incidental To Delivery Of The Goods To Their Final Destination; And Iv. The Price Of Other (incidental) Services, If Any, Listed In The Bds. B. For Goods Offered From Abroad: I. Unless Otherwise Stated In The Bds, The Price Of The Goods Shall Be Quoted Delivered Duty Paid (ddp) With The Place Of Destination In The Philippines As Specified In The Bds. In Quoting The Price, The Bidder Shall Be Free To Use Transportation Through Carriers Registered In Any Eligible Country. Similarly, The Bidder May Obtain Insurance Services From Any Eligible Source Country. Ii. The Price Of Other (incidental) Services, If Any, As Listed In The Bds. 13. Bid And Payment Currencies 13.1. For Goods That The Bidder Will Supply From Outside The Philippines, The Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Accepted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreign Currencies, Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 13.2. Payment Of The Contract Price Shall Be Made In: Philippine Pesos. 14. Bid Security 14.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 14.2. The Bid And Bid Security Shall Be Valid Until 120 Calendar Days From Submission And Bid Opening. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 15. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. If The Procuring Entity Allows The Submission Of Bids Through Online Submission Or Any Other Electronic Means, The Bidder Shall Submit An Electronic Copy Of Its Bid, Which Must Be Digitally Signed. An Electronic Copy That Cannot Be Opened Or Is Corrupted Shall Be Considered Non-responsive And, Thus, Automatically Disqualified. 16. Deadline For Submission Of Bids 16.1. The Bidders Shall Submit On The Specified Date And Time And Either At Its Physical Address Or Through Online Submission As Indicated In Paragraph 7 Of The Ib. 17. Opening And Preliminary Examination Of Bids 17.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 17.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 18. Domestic Preference 18.1. The Procuring Entity Will Grant A Margin Of Preference For The Purpose Of Comparison Of Bids In Accordance With Section 43.1.2 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Entity’s Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed,” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of The 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, Bidders May Submit A Proposal On Any Of The Lots Or Items, And Evaluation Will Be Undertaken On A Per Lot Or Item Basis, As The Case Maybe. In This Case, The Bid Security As Required By Itb Clause 14 Shall Be Submitted For Each Lot Or Item Separately. 19.3. The Descriptions Of The Lots Or Items Shall Be Indicated In Section Vii (technical Specifications), Although The Abcs Of These Lots Or Items Are Indicated In The Bds For Purposes Of The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184. The Nfcc Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 19.4. The Project Shall Be Awarded As One Project Having Several Items That Shall Be Awarded As One Contract. 19.5. Except For Bidders Submitting A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation, All Bids Must Include The Nfcc Computation Pursuant To Section 23.4.1.4 Of The 2016 Revised Irr Of Ra No. 9184, Which Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. For Bidders Submitting The Committed Line Of Credit, It Must Be At Least Equal To Ten Percent (10%) Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 20. Post-qualification 20.2. Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, {[include If Framework Agreement Will Be Used:] Or In The Case Of Multi-year Framework Agreement, That It Is One Of The Eligible Bidders Who Have Submitted Bids That Are Found To Be Technically And Financially Compliant,}the Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps) And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. {[include If Framework Agreement Will Be Used:] For Every Mini-competition In Framework Agreement, The Lcb Shall Likewise Submit The Required Documents For Final Post Qualification.} 21. Signing Of The Contract 21.1. The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Section Iii. Bid Data Sheet Bid Data Sheet Itb Clause 5.3 For This Purpose, Contracts Similar To The Project Shall Be: A.) Delivery Of Various Military Equipment B.) Completed Within Three (3) Years Prior To The Deadline For The Submission And Receipt Of Bids. 7.1 Subcontracting Is Not Allowed. 12 No Further Instruction. 14.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration, Or Any Of The Following Forms And Amounts: The Amount Of Not Less Than The Amount Equivalent To Two Percent (2%) Of The Abc, If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; Or The Amount Of Not Less Than The Amount Equivalent To Five Percent (5%) Of Total Abc, If Bid Security Is In Surety Bond. 19.3 The Approved Budget For The Contract For One (1) Lot For The Supply And Delivery Of Delivery Of Various Military Equipment For Bucor Swat Is Ten Million Four Hundred Sixtyfour Thousand (10,464,000.00) 20.2 Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its And Must Present Original Copies During Post-qualification; 1. Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps) 2. Supporting Documents For The Slcc (sales Invoice Or Official Receipt Or End-users Acceptance) 3. Valid And Current Registration Certificate (sec Certificate Of Registration For Corporation Or Dti Certificate Of Registration For Sole Proprietorship Or Cda Certificate Of Registration For Cooperative) 4. Valid And Current Mayor’s Or Business Permit 5. Valid And Current Tax Clearance 6. Audited Financial Statement 21.2 No Further Instruction. Section Iv. General Conditions Of Contract 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. Additional Requirements For The Completion Of This Contract Shall Be Provided In The Special Conditions Of Contract (scc). 2. Advance Payment And Terms Of Payment 2.1. Advance Payment Of The Contract Amount Is Provided Under Annex “d” Of The Revised 2016 Irr Of Ra No. 9184. 2.2. The Procuring Entity Is Allowed To Determine The Terms Of Payment On The Partial Or Staggered Delivery Of The Goods Procured, Provided Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted In Accordance With Prevailing Accounting And Auditing Rules And Regulations. The Terms Of Payment Are Indicated In The Scc. 3. Performance Security Within Ten (10) Calendar Days From Receipt Of The Notice Of Award By The Bidder From The Procuring Entity But In No Case Later Than The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr Of Ra No. 9184.{[include If Framework Agreement Will Be Used:] In The Case Of Framework Agreement, The Bidder May Opt To Furnish The Performance Security Or A Performance Securing Declaration As Defined Under The Guidelines On The Use Of Framework Agreement.} 4. Inspection And Tests The Procuring Entity Or Its Representative Shall Have The Right To Inspect And/or To Test The Goods To Confirm Their Conformity To The Project {[include If Framework Agreement Will Be Used:] Or Framework Agreement} Specifications At No Extra Cost To The Procuring Entity In Accordance With The Generic Procurement Manual. In Addition To Tests In The Scc, Section Vii (technical Specifications) Shall Specify What Inspections And/or Tests The Procuring Entity Requires, And Where They Are To Be Conducted. The Procuring Entity Shall Notify The Supplier In Writing, In A Timely Manner, Of The Identity Of Any Representatives Retained For These Purposes. All Reasonable Facilities And Assistance For The Inspection And Testing Of Goods, Including Access To Drawings And Production Data, Shall Be Provided By The Supplier To The Authorized Inspectors At No Charge To The Procuring Entity. 5. Warranty 5.1 In Order To Assure That Manufacturing Defects Shall Be Corrected By The Supplier, A Warranty Shall Be Required From The Supplier As Provided Under Section 62.1 Of The 2016 Revised Irr Of Ra No. 9184. 5.2 The Procuring Entity Shall Promptly Notify The Supplier In Writing Of Any Claims Arising Under This Warranty. Upon Receipt Of Such Notice, The Supplier Shall, Repair Or Replace The Defective Goods Or Parts Thereof Without Cost To The Procuring Entity, Pursuant To The Generic Procurement Manual. 6. Liability Of The Supplier The Supplier’s Liability Under This Contract Shall Be As Provided By The Laws Of The Republic Of The Philippines. If The Supplier Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. Section V. Special Conditions Of Contract Special Conditions Of Contract Gcc Clause 1 Delivery And Documents – Delivery Of The Goods/security Services Shall Be Made By The Service Provider Within Fifteen (15) Calendar Days From Receipt Of Notice To Proceed By The Winning Bidder, In Accordance With The Terms Specified In Section Vi (schedule Of Requirements). For Purposes Of This Clause The Procuring Entity’s Representative Of This Project Is Cinsp Nelson Battad, Nbp, Muntinlupa City. Incidental Services – The Supplier/service Provider Is Required To Provide All Of The Following Services, Including Additional Services, If Any, Specified In Section Vi. Schedule Of Requirements. The Contract Price For The Goods/ And Services Shall Include The Prices Charged By The Supplier For Incidental Services And Shall Not Exceed The Prevailing Rates Charged To Other Parties By The Supplier For Similar Services. Packaging – The Supplier Shall Provide Such Packaging Of The Goods As Is Required To Prevent Their Damage Or Deterioration During Transit To Their Final Destination, As Indicated In This Contract. The Packaging Shall Be Sufficient To Withstand, Without Limitation, Rough Handling During Transit And Exposure To Extreme Temperatures, Salt And Precipitation During Transit, And Open Storage. Packaging Case Size And Weights Shall Take Into Consideration, Where Appropriate, The Remoteness Of The Goods’ Final Destination And The Absence Of Heavy Handling Facilities At All Points In Transit. The Packaging, Marking, And Documentation Within And Outside The Packages Shall Comply Strictly With Such Special Requirements As Shall Be Expressly Provided For In The Contract, Including Additional Requirements, If Any, Specified Below, And In Any Subsequent Instructions Ordered By The Procuring Entity. The Outer Packaging Must Be Clearly Marked On At Least Four (4) Sides As Follows: Name Of The Procuring Entity Name Of The Supplier Contract Description Final Destination Gross Weight Any Special Lifting Instructions Any Special Handling Instructions Any Relevant Hazchem Classifications A Packaging List Identifying The Contents And Quantities Of The Package Is To Be Placed On An Accessible Point Of The Outer Packaging If Practical. If Not Practical The Packaging List Is To Be Placed Inside The Outer Packaging But Outside The Secondary Packaging. Transportation – Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip, Or Ddp, Transport Of The Goods To The Port Of Destination Or Such Other Named Place Of Destination In The Philippines, As Shall Be Specified In This Contract, Shall Be Arranged And Paid For By The Supplier, And The Cost Thereof Shall Be Included In The Contract Price. Where The Supplier Is Required Under This Contract To Transport The Goods To A Specified Place Of Destination Within The Philippines, Defined As The Project Site, Transport To Such Place Of Destination In The Philippines, Including Insurance And Storage, As Shall Be Specified In This Contract, Shall Be Arranged By The Supplier, And Related Costs Shall Be Included In The Contract Price. Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip Or Ddp, Goods Are To Be Transported On Carriers Of Philippine Registry. In The Event That No Carrier Of Philippine Registry Is Available, Goods May Be Shipped By A Carrier Which Is Not Of Philippine Registry Provided That The Supplier Obtains And Presents To The Procuring Entity Certification To This Effect From The Nearest Philippine Consulate To The Port Of Dispatch. In The Event That Carriers Of Philippine Registry Are Available But Their Schedule Delays The Supplier In Its Performance Of This Contract The Period From When The Goods Were First Ready For Shipment And The Actual Date Of Shipment The Period Of Delay Will Be Considered Force Majeure. The Procuring Entity Accepts No Liability For The Damage Of Goods During Transit Other Than Those Prescribed By Incoterms For Ddp Deliveries. In The Case Of Goods Supplied From Within The Philippines Or Supplied By Domestic Suppliers Risk And Title Will Not Be Deemed To Have Passed To The Procuring Entity Until Their Receipt And Final Acceptance At The Final Destination. 2.2 No Further Instructions. 4 The Inspections And Tests That Will Be Conducted At The Project Site And Actual Inspection Of The Goods/services Shall Be Done As Required Under Section Vii. Technical Specifications. Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. Item Number Description Quantity Delivered, Weeks/months 1 Supply And Delivery Of Various Military Equipment For Bucor Swat 1 Lot 15 Calendar Days From Receipt Of Notice To Proceed Terms And Conditions: Mode Of Payment: Lump Sum (subject For Approval By End-user And Upon Issuance Of Certificate Of Acceptance By The End-user And Inspection And Acceptance Committee) Section Vii. Technical Specifications Technical Specifications Qty Unit Item Description Put Comply Or Not Comply 30 Pc Kevlar Nij Level Ive Quick Release And Adjustable, With Protective Inner Paddings 30 Set Level Iv Bulletproof Vest With Plates (2pcs) Nij Level Iv Ballistic 4 Unit Ballistic Shield Level Iva, 4’’x16’’ With Ballistic Visor View Port, 24’’x36’’ Size Dimension, Lightweight 30 Set Gas Mask With Penoramic Glass, Full Face Coverage, Vacuum Contact With Face Via Silicon Attachments, 5 Points Adjustable Grip, Can Be Used In Accordance With Specific Filter 2 Set 20ft Extension Ladder Fiberglass Extension Ladder Heavy Duty Anti-slip D-drug Steps High Strength Rope Safety Locks Adjustable Feets 2 Set Portable Combination Torch, Tip & Cylinder Kit Attachment: Cutting Tip, Heating Nozzle, Welding & Brazing Tip, Check Valve, Fuel Regulator, Torch Handle, Goggles, Handle, Striker, Tank Key Hose Lenth: 12.5 Ft Hose Fitting: Size A Torch Head Angle: 90 Degree 60 Pc Tear Gas Grenade/canister Description: Cartridge, 37/40mm, Cn Smoke Model Nunber: 3220 (short Range),3221 (long Range) Type: Single Projects Cn Irritant Smoke Discharge Time: 30-10 Seconds Emmission Ports: 1 On Bottom And 1 On Top Range: 80 To 150 Yards Cartridge Material: Aluminum Projectile Material: Aluminum Projectile Weight: 128 Gm Overall Height: 4.8’’’’(12.2 Cm) Overall Weight:196 Gm Chemival Weight: 93 Gm Agent Weight 27 Gm Compatibility: 1.5 1’’’riot Guns M203 & M79 Type Grenade Launchers Waterproof: Lacquer Coated Primer & Sealed Top 30 Pc Smoke Grenade Hight Volume, Continuous Discharge Grenade. Diameter: 2.35 In/6.0 Cm Length: 6.00 In 15.2 Cm Discharge Ports: 4 Gas Ports On Top And 1 At Bottom Discharge Time: 20-40 Seconds Launchable: Yes 8 Set Night Vision Goggles Generation: Gen 3 Field Of View: 40o Magnification: 1x Length: 5-4/5 Width: 3-1/10 Heiht: 6-1/10in Construction: Plastic Optical Lens Coating: Coated Min. Distance: 0.82 Ft Aa Batteries Weather Resistant: Yes Weight: 23.99oz Includes: Demist Shield, Goggle Kit, Len Tissue, Lens Cap,lithium Battery, Manual, Packing Box, Sacrificial Window, Soft Carrying Case 60 Unit Radios Performance Characteristics: Military Grade Frequency Band: Vhf, Uhf Repeater Capable: Yes Battery Life (based On A 05 05 90 Duty Cycle) 16.2 Hours In Digital Mode 11.1 Hours In Analog Mode Standard Battery Chemistry Type: Lithium Ion 1 Watc92:c118t: Yes Physical Characteristics Available Option Board: Yes Emergency Button: Yes Keypad: Full Display: Full, Color, Day And Night Mode Weight (with Standard Battery): 12.54oz (355.5g) Dimensions H X W X D (with Standard Battery): 5.13 X 2.17 X 1.62 In. (130.3 X 55.2 X 41.1 Mm) Radio Features Transmit Interrupt: Yes Digital Private Line: Yes Private Line: Yes Monitor Permanent (sticky) Monitor: Yes Lone Worker: Yes Gps Capable: Yes Voice Announcement: Yes Signalling: Mdc (encode/decode), Quik-call Ii (encode/decode), Dtmf Encode Intelligent Audio: Yes Bluetooth: Integrated Bluetooth Audio And Data Programmable Buttons: Yes Voice Operated Transmit (vox): Yes Time Out Timer: Yes Talkaround: Yes Text Messaging Capable: Yes Scan Types: Normal, Priority, Dual Priority, Talk Group Nuisance Channel Delete, All Group, Home Revert Phone Book: Yes Group Call: Yes One To One Calling: Yes Missed Call Alerts: Yes Cps (customer Programming Software): Yes Channel Spacing: 12.5, 25 Number Of Channels: 1000 Mil Spec 810 C, 810 D, 810 E, 810 F, 810 G Noise Reduction Software: Yes Ip Standards: Ip57” 2 Unit Drones Takeoff Weight: 720 G Dimensions: Folded (without Propellers): 207x100.5x91.1 Mm (lxwxh) Unfolded (without Propellers): 258.8x326x105.8mm (lxwxh) Max Ascent Speed: 10m/s Max Descent Speed: 10 M/s Max Horizontal Speed (at Sea Level, No Wind): 21 M/s; 19 M/s In Eu Regions. Max Takeoff Altitude: 6000 M Max Flight Time: 46 Minutes Max Flight Distance: 32 Km Max Wind Speed Resistance: 12 M/s Max Pitch Angle: 35o Operating Temperature: -10o To 40o C (14o To 104o F) Global Navigation Satellite System: Gps+galileo+beidou Hovering Accuracy Range Internal Storage: 8 Gb Camera Image Sensor Wide Angle Camera: 1/1.3-inch Cmos, Effective Pixels: 48 Mp Medium Tele Camera: 1/1.3-inch Cmos, Effective Pixels: 48 Mp Lens: Wide-angle Camera Charging Type Three Batteries Charged In Sequence. Compatibility Dji Air 3 Intelligent Flight Battery Car Charger Input Car Power Input: 12.7-16 V, 6.5 A, Rated Voltage 14 V (dc) Max Operating Time Without Charging Any Mobile Device: 6 Hours When Charging A Mobile Device: 3.5 Hours I/we Hereby Commit To Comply And Deliver All The Requirement In Accordance With The Above Stated Specifications. Conforme: Name Of Company In Print Signature Printed Name Of Authorized Representative Date Section Viii. Checklist Of Technical And Financial Documents Checklist Of Technical And Financial Documents I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages) In Accordance With Section 8.5.2 Of The Irr; Technical Documents ⬜ (b) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (c) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided For In Sections 23.4.1.3 And 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184, Within The Relevant Period As Provided In The Bidding Documents; And ⬜ (d) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission Or Original Copy Of Notarized Bid Securing Declaration; And ⬜ (e) Conformity With The Technical Specifications, Which May Include Production/delivery Schedule, Manpower Requirements, And/or After-sales/parts, If Applicable; And ⬜ (f) Original Duly Signed Omnibus Sworn Statement (oss) And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ (g) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc) Or A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation. Class “b” Documents ⬜ (h) If Applicable, A Duly Signed Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Ii. Financial Component Envelope ⬜ (i) Original Of Duly Signed And Accomplished Financial Bid Form; And ⬜ (j) Original Of Duly Signed And Accomplished Price Schedule(s). Other Documentary Requirements Under Ra No. 9184 (as Applicable) ⬜ (k) [for Foreign Bidders Claiming By Reason Of Their Country’s Extension Of Reciprocal Rights To Filipinos] Certification From The Relevant Government Office Of Their Country Stating That Filipinos Are Allowed To Participate In Government Procurement Activities For The Same Item Or Product. ⬜ (l) Certification From The Dti If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity. Price Schedule For Goods Offered From Within The Philippines [shall Be Submitted With The Bid If Bidder Is Offering Goods From Within The Philippines] ______________________________________________________________________________ For Goods Offered From Within The Philippines Name Of Bidder ________________________ Project Id No._________ Page ___of___ 1 2 3 4 5 6 7 8 9 10 Item Description Country Of Origin Quantity Unit Price Exw Per Item Transportation And All Other Costs Incidental To Delivery, Per Item Sales And Other Taxes Payable If Contract Is Awarded, Per Item Cost Of Incidental Services, If Applicable, Per Item Total Price, Per Unit (col 5+6+7+8) Total Price Delivered Final Destination (col 9) X (col 4) Name: ___________________________________________________________________ Legal Capacity: ____________________________________________________________ Signature: ________________________________________________________________ Duly Authorized To Sign The Bid For And Behalf Of: __________________________________ Price Schedule For Goods Offered From Abroad [shall Be Submitted With The Bid If Bidder Is Offering Goods From Abroad] ______________________________________________________________________________ For Goods Offered From Abroad Name Of Bidder _________________________ Project Id No._________ Page ___ Of ___ 1 2 3 4 5 6 7 8 9 Item Description Country Of Origin Quantity Unit Price Cif Port Of Entry (specify Port) Or Cip Named Place (specify Border Point Or Place Of Destination) Total Cif Or Cip Price Per Item (col. 4 X 5) Unit Price Delivered Duty Unpaid (ddu) Unit Price Delivered Duty Paid (ddp) Total Price Delivered Ddp (col 4 X 8) Name: ___________________________________________________________________ Legal Capacity: ____________________________________________________________ Signature: ________________________________________________________________ Duly Authorized To Sign The Bid For And Behalf Of: ___ Appendix “1” Bid Form For The Procurement Of Goods [shall Be Submitted With The Bid] _________________________________________________________________________ Bid Form Date : _________________ Project Identification No. : _________________ To: [name And Address Of Procuring Entity] Having Examined The Philippine Bidding Documents (pbds) Including The Supplemental Or Bid Bulletin Numbers [insert Numbers], The Receipt Of Which Is Hereby Duly Acknowledged, We, The Undersigned, Offer To [supply/deliver/perform] [description Of The Goods] In Conformity With The Said Pbds For The Sum Of [total Bid Amount In Words And Figures] Or The Total Calculated Bid Price, As Evaluated And Corrected For Computational Errors, And Other Bid Modifications In Accordance With The Price Schedules Attached Herewith And Made Part Of This Bid. The Total Bid Price Includes The Cost Of All Taxes, Such As, But Not Limited To: [specify The Applicable Taxes, E.g. (i) Value Added Tax (vat), (ii) Income Tax, (iii) Local Taxes, And (iv) Other Fiscal Levies And Duties], Which Are Itemized Herein Or In The Price Schedules, If Our Bid Is Accepted, We Undertake: A. To Deliver The Goods In Accordance With The Delivery Schedule Specified In The Schedule Of Requirements Of The Philippine Bidding Documents (pbds); B. To Provide A Performance Security In The Form, Amounts, And Within The Times Prescribed In The Pbds; C. To Abide By The Bid Validity Period Specified In The Pbds And It Shall Remain Binding Upon Us At Any Time Before The Expiration Of That Period. [insert This Paragraph If Foreign-assisted Project With The Development Partner: Commissions Or Gratuities, If Any, Paid Or To Be Paid By Us To Agents Relating To This Bid, And To Contract Execution If We Are Awarded The Contract, Are Listed Below: Name And Address Amount And Purpose Of Of Agent Currency Commission Or Gratuity ________________________________________________ ________________________________________________ ________________________________________________ (if None, State “none”) ] Until A Formal Contract Is Prepared And Executed, This Bid, Together With Your Written Acceptance Thereof And Your Notice Of Award, Shall Be Binding Upon Us. We Understand That You Are Not Bound To Accept The Lowest Calculated Bid Or Any Bid You May Receive. We Certify/confirm That We Comply With The Eligibility Requirements Pursuant To The Pbds. The Undersigned Is Authorized To Submit The Bid On Behalf Of [name Of The Bidder] As Evidenced By The Attached [state The Written Authority]. We Acknowledge That Failure To Sign Each And Every Page Of This Bid Form, Including The Attached Schedule Of Prices, Shall Be A Ground For The Rejection Of Our Bid. Name: ___________________________________________________________________ Legal Capacity: _____________________________________________________________ Signature: ________________________________________________________________ Duly Authorized To Sign The Bid For And Behalf Of: __________________________________ Date: ___________________ Omnibus Sworn Statement (revised) [shall Be Submitted With The Bid] _________________________________________________________________________ Republic Of The Philippines ) City/municipality Of ______ ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. [select One, Delete The Other:] [if A Sole Proprietorship:] I Am The Sole Proprietor Or Authorized Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; 2. [select One, Delete The Other:] [if A Sole Proprietorship:] As The Owner And Sole Proprietor, Or Authorized Representative Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached Duly Notarized Special Power Of Attorney; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g., Duly Notarized Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney, Whichever Is Applicable;)]; 3. [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. [name Of Bidder] Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. [select One, Delete The Rest:] [if A Sole Proprietorship:] The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Partnership Or Cooperative:] None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Corporation Or Joint Venture:] None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. [name Of Bidder] Complies With Existing Labor Laws And Standards; And 8. [name Of Bidder] Is Aware Of And Has Undertaken The Responsibilities As A Bidder In Compliance With The Philippine Bidding Documents, Which Includes: A. Carefully Examining All Of The Bidding Documents; B. Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C. Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D. Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The [name Of The Project]. 9. [name Of Bidder] Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code. In Witness Whereof, I Have Hereunto Set My Hand This __ Day Of ___, 20__ At ____________, Philippines. [insert Name Of Bidder Or Its Authorized Representative] [insert Signatory’s Legal Capacity] Affiant [jurat] [format Shall Be Based On The Latest Rules On Notarial Practice]
Closing Date5 Mar 2024
Tender AmountPHP 10.4 Million (USD 186.2 K)
Philippine Merchant Marine Academy Tender
Philippines
Details: Description Quantity Unit Item Description Lot Full Mission Bridge Simulator Dnv Class A 1 1.1 Features And Application The Bridge Simulator Should Provide A Realistic, Ship-like Environment Based On Real Hardware Consoles And High- Quality Visualization. The Systems Include Major Components Such As Conning, Radar/ Arpa And Ecdis, Gmdss, Navigation Equipment, Bearing Finder, Steering Control Console, Engine Control, Auto Pilot System, Overhead Display, Etc. The Simulator Can Be Utilized To A Variety Of Navigation Techniques Under Different Environmental Conditions, Serving A Wide Range Of Purposes As Follows: 1. Control Of The Ship While Navigating In The Operational And Emergency Modes In Various Weather Conditions With The Possibility Of Setting Wind And Current Parameters; 2. Analysis Of The Above-water Situation In Day And Night Conditions; In Poor Visibility By Visible Navigation Lights And Information Received From Radar/ Arpa; 3. Use Of The Electronic Chart-based Navigational Information System (ecdis); 4. Practical Use Of Radio Equipment And Global Maritime Distress And Safety System (gmdss) Facilities; 5. Application Of The International Regulations For Preventing Collisions At Sea; 6. Ship Control During Anchoring And Mooring; 7. Ship Control During Towing Operations; 8. Ship Control During Maneuvers "man Overboard"; 9. Rational Methods Of Ship Control In Case Of Main Engines (me) And Ship And Navigation Equipment Failures During Movement; 10. Eye Survey Of Above-water And Radar Situation, Determination Of Vessel Movement Elements; 11. Navigational Situation Assessment By Visual Observation During Day Time, By Lights At Night Time And By Observation Of Transmission Of Echo Signals On Ppi Simulators In Conditions Of Limited Visibility; 12. Visual Determination Of Vessel Movement Patterns, Maneuvering Capabilities And Dimensions; 13. Selection And Execution Of Collision Avoidance Maneuvers In Open Sea, During Night And In Limited Visibility Conditions Using Radar/arpa; 14. Evaluation Of Accuracy Of Primary And Secondary Information Received From Arpa, Consideration Of Factors Affecting Accuracy Of Arpa And Delay In Formation Of Secondary Radar Information; 15. Orientation Of Ships In Complex Navigation Conditions In Daytime And Nighttime And In Conditions Of Limited Visibility; 16. Use Of Ecdis For Preliminary And Executive Plotting, Practicing Correct Response To Emergency Signals Produced By Ecdis, Solution Of Chart-metric Tasks And Ensuring Safety Of Navigation With The Use Of Information Received From Ecdis; 17. Use Of Basic Capabilities Of Marine Mobile Service And Marine Mobile Satellite Service. 1.2 The Bridge Simulator Can Be Used For The Stcw Convention Competency Requirements And Simulation Objectives. The Following Are The Items Of Navigator Competence Related To Navigation Bridge Operations That Can Be Evaluated Using The Bridge Simulator. In Addition, The Following International Standards Have Been Considered In The Development Of The Full Mission Ship Control Simulator: Stcw Reference/competence Item/module Used Table A-ii/1.1 Plan And Execute A Passage And Determine Vessel’s Location Ecdis Module. Navaids Simulation Module. Ship Motion Simulation. Main Instructor Control And Monitoring. Table A-ii/1.2 Maintain A Safe Navigational Watch Ship Motion Simulation. Conning Display And Ship Hardware Controls. Visualization Channel. Ecdis Module. Main Instructor Control And Monitoring. Evaluation And Assessment Module. Table A-ii/1.3 Use Radar And Arpa To Maintain Navigational Safetys Hip Motion Simulation. Conning Display And Ship Hardware Controls. Radar/arpa Imitator. Main Instructor Control And Monitoring. Table A-ii/1.4 Use Ecdis To Maintain Navigational Safetys Hip Motion Simulation. Conning Display And Ship Hardware Bearing Station. Radar/arpa Imitator. Navaids Simulation Module. Ecdis Module. Main Instructor Control And Monitoring. Table A-ii/1.5 Respond To Emergencies Main Instructor Control And Monitoring. Ship Motion Simulation. Conning Display And Ship Hardware Controls (alarms Panels). Table A-ii/1.6 Respond To A Distress Signal At Sea Main Instructor Control And Monitoring. Gmdss Support Module. Navaids Simulation Module (ais). Conning Display And Ship Hardware Controls. Radar/arpa. Ecdis Module. Audio Logger. Table A-ii/1.8 Transmit And Receive Information By Means Of Visual Signals Main Instructor Control And Monitoring. Ship Motion Simulation. Visualization Channel. Signaling System. Conning Display. Table A-ii/1.9 Maneuver The Ship Main Instructor And Monitoring. Conning Display And Ship Hardware Controls. Evaluation And Assessment Module. Table A-ii/2.1 Plan Voyage And Navigatem Ain Instructor Control And Monitoring. Ecdis Module. Navaids Simulation Module. Ship Motion Simulation. Table A-ii/2.2 Determine Position And Accuracy Of Resulting Position Fixes By Any Means Ship Motion Simulation. Visualization Channel. Bearing Station. Radar/arpa Imitator. Navaids Simulation Module. Ecdis Module. Main Instructor Control And Monitoring. Table A-ii/2.3 Determine And Consider Compass Errors Main Instructor Control And Monitoring. Ship Motion Simulation. Visualization Channel. Bearing Station. Conning Display. Table A-ii/2.4 Coordinate Search And Rescue Operations Main Instructor Control And Monitoring. Gmdss Support Module. Sound System. Visualization Channel. Radar/arpa Imitator. Conning Display. Table A-ii/2.5 Establish Watchkeeping Procedures And Arrangements Main Instructor Control And Monitoring. Ship Motion Simulation. Exchange Data Module For Ibs. Conning Display And Ship Hardware Controls. Gmdss Support Module. Sound System. Visualization Channel. Radar/arpa Imitator. Navaids Simulation Module (gps/dgps, Loran-c, Ais, Ssas). Ecdis Module. Audio Logger. Table A-ii/2.6 Maintain Navigational Safety By Using Information From Navigational Equipment And Systems To Aid In Command Decision Makingm Ain Instructor Control And Monitoring. Ship Motion Simulation. Radar/arpa Imitator. Navaids Simulation Module (gps/dgps, Loran-c, Ais). Ecdis Module And Ecs Radar Overlay. Conning Display And Ship Hardware Controls. Audio Logger. Table A-ii/2.7 Maintain Navigational Safety By Using Ecdis And Related Navigational Systems To Aid In Command Decision Makinge Cdis Module. Navaids Simulation Module. Ship Motion Simulation. Main Instructor Control And Monitoring. Table A-ii/2.10 Maneuver And Handle The Vessel In All Conditions Main Instructor Control And Monitoring. Ship Motion Simulation. Conning Display And Ship Hardware Controls. Evaluation And Assessment Module. Table A-ii/2.11 Remote Control Of Power Plant And Engineering Systems And Services Main Instructor Control And Monitoring. Ship Motion Simulation. Conning Display And Ship Hardware Controls. Main Engine Control Module. Auxiliary Systems Module. Evaluation And Assessment Module. Table A-ii/3.1 Plan And Execute Coastal Passages And Determine Position Ecdis Module. Navaids Simulation Module. Ship Motion Simulation. Main Instructor Control And Monitoring. Table A-ii/3.2 Maintain A Safe Navigational Watch Main Instructor Control And Monitoring. Ship Motion Simulation. Conning Display And Ship Hardware Controls. Visualization Channel. Ecdis Module. Main Instructor Control And Monitoring. Evaluation And Assessment Module. Table A-ii/3.3 Respond To Emergencies Main Instructor Control And Monitoring. Ship Motion Simulation. Conning Display And Ship Hardware Controls (alarm Panels). Table A-ii/3.4 Respond To A Distress Signal At Sea Main Instructor Control And Monitoring. Gmdss Support Module. Navaids Simulation Module (ais). Conning Display And Ship Hardware Controls. Radar/arpa. Ecdis Module. Audio Logger. Table A-ii/3.5 Maneuver The Vessel And Operate Small Ship Power Plants Main Instructor Control And Monitoring. Ship Motion Simulation. Conning Display And Ship Hardware Controls. Evaluation And Assessment Module. Table A-ii/4.1◻operate The Ship And Follow The Helmsman’s Orders In Englishm Ain Instructor Control And Monitoring. Ship Motion Simulation. Conning Display And Ship Hardware Controls. Evaluation And Assessment Module. Table A-ii/4.2 Monitor The Situation With Sight And Hearing. M Ain Instructor Control And Monitoring. Visualization System. Sound System. Evaluation And Assessment Module. Table A-ii/5.2 Participate In Berthing, Anchoring And Other Moorings Main Instructor Control And Monitoring. Anchoring Module. Mooring Module. Evaluation And Assessment Module. Table A-v/4-1.2 Monitor And Enforce Compliance With Legal Requirements Main Instructor Control And Monitoring. Evaluation And Assessment Module. Evaluation And Assessment Module. Table A-v/4-1.3 Apply Safe Work Practices, Respond To Emergencies Main Instructor Control And Monitoring. Ship Motion Simulation. Conning Display And Ship Hardware Controls. Evaluation And Assessment Module. Table A-v/4-1.4 Ensure Compliance With Pollution Prevention Requirements And Prevent Environmental Hazards Main Instructor Control And Monitoring. Conning Display And Ship Hardware Controls. Engine Control Multi Touch Display. Evaluation And Assessment Module. Table A-v/4.2.3◻maintain The Safety Of The Ship’s Crew And Passengers And Maintain Life- Saving, Firefighting, And Other Safety Systems In Good Working Order. Main Instructor Control And Monitoring. Conning Display And Ship Hardware Controls. Engine Control Multi Touch Display. Steering Multi Touch Display For Control Of Autopilot And Steering. Evaluation And Assessment Module. In Addition, The Following International Standards Have Been Considered In The Development Of The Full Mission Ship Control Simulator: 1. International Regulations For Preventing Collisions At Sea, 1972; 2. International Convention On The Safety Of Life At Sea, 1974; 3. International Convention On Standards For Training, Certification And Watchkeeping, 1978, 1995 As Amended In 2010; 4. Automatic Radar Plotting Aids Course. Regulations And Guide (department Of Trade, London 1981); 5. I Mo Resolution A. 477(12). Performance Standards For Radar Equipment. Adopted On November 19, 1981; 6. Imo Resolution A. 482(12); 7. Imo Resolution A. 483(12); 8. Imo Resolution A. 823(19). Performance Standards For Automatic Radar Plotting Aids. Adopted On November 23, 1995; 9. Imo Resolution Msc64(67). Recommendation On Performance Standards For Radar Equipment. Adopted On December 04, 1996. 10. Imo Resolution Msc232(82). Adopted On December 05, 2006. 1.3 Ship Motion Simulation Software The Ship Motion Simulation Program Contains Simulations Of Various Effects That Cannot Be Evaluated Separately From The Functionality Of A Particular Configuration: 1. Own Ships Motion; 2. Target Ships Motion; 3. Own Tugs Motion; 4. Target Tugs Motion; 5. Mooring And Towing Lines; 6. Rescue Objects; 7. Land Objects; 8. Scene Objects; 9. Weather Effects; 10. Miscellaneous. General: 1. 6 Dof Ship Motion Equation; 2. Hull Hydrodynamics Model; 3. Hull Aerodynamics Model; 4. Propulsion Plant Model; 5. Thruster Model; 6. Rudder Model; 7. Engine Model; 8. Model Of The Environmental Influence (wind, Sea, Current); 9. Shallow Water Influence Model; 10. Roll/pitch Wave Model; 11. Model Of The Distributed Current Effect; 12. Model Of Hydrodynamic Interaction With Another Ship And Water Area Boundary; 13. Multi-functional Autopilot Model; 14. Displacement Ship And Tug Models; 15. Optional: The Following Types Of Passive Vessel And Aerial Target Models: Hovercraft, Hydrofoils, Airplanes And Helicopters; Models Are Based On Real Prototypes And Adjusted Based On Sea And Tank Tests Data. Forces: 1. Forces And Moments Of Hydrodynamic And Aerodynamic Resistance Of The Ship’s Hull; 2. Force And Moment Of Impinging Flow On The Rudder Plane; 3. Force And Moment Of The Propeller; 4. Forces And Moments Of Bow And Stern Thrusters; 5. Forces And Moments Of Hydrodynamic Interaction With Other Vessels And Water Area Boundaries (bottom, Shoal, Canal, Walls); 6. Wind Forces And Moments; 7. Forces And Moments Of Field Currents. Effects: 1. Effect Of Shallow Water On Hull Drag Force (added Mass); 2. Effect Of Shallow Water On Reduction Of Propeller Thrust; 3. Effect Of Shallow Water On Reduction Of Steering Capacity; 4. Effect Of Shallow Water On Trim And Bank Changes; 5. Hydrodynamic Forces And Moments Caused By Passing Near Other Ships And Water Area Boundaries (uneven Seabed, Shoal, Mooring Wall); 6. Hydrodynamic Forces Caused By The Propeller Jet Of Another Vessel; 7. Vessel Suction Caused By The Impact Of The Propeller Jet On The Mooring Wall; 8. Mechanical Forces And Moments Caused By Interaction With Other Ships And Water Area Boundaries (mooring Walls); 9. Ship Collision; 10. Collision Between Ship And Mooring Walls Or Aids To Navigation; 11. Hard Grounding; 12. Soft Grounding. Propulsion Types: 1. Fpp; 2. Cpp; 3. Tunnel Thruster. Engines: 1. Low And Medium Rpm Reversible Diesel Engine (reversing With Compressed Air); 2. Medium And High Rpm Non-reversible Diesel Engine (reversing With Reversing Clutch) Steering Systems: 1. Balance Rudder 2. Steering Nozzzle 3. Z-drive 1.4 Ship Models The Bridge Simulator, Six Degrees Of Freedom Models Are Provided Not Only For Own Ship, But Also For Target Ships. Mathematical Modeling Of The Motion Of Each Ship Should Be Based On Integration Of A System Of Up To 12 Differential Equations Describing The Spatial Motion Of A Solid Body With 6 Degrees Of Freedom In A Fluid. 1. Wind Effect Modeling Includes: 2. Calculations Of Wind Center And Area Varying With Roll/pitch; 3. Calculations Of Forces And Moments As Wind Speed And Relative Bearing Change; 4. Calculations Of Resistance To These Forces Exerted By The Underwater Part Of The Ship's Hull. 5. Wave Effect Modeling Includes The Following Calculations: 6. Surge; 7. Sway; 8. Heave; 9. Yaw; 10. Roll; 11.p Itch. 12. Current Effect Modeling Includes: 1. Calculations Of The Instantaneous Value Of The Total Current Vector And Its Application Point In The Underwater Part Of The Ship's Hull; 2. Calculation Of The Corresponding Force And Its Momentum; 3. Calculation Of Water Resistance To This Force From The Opposite Board. Shallow Water Effect Modeling Includes: 1. Speed Reduction Calculations; 2. Calculations Of Deterioration Of Turning Characteristics; 3. Calculations Of Trim Changes Depending On The Ship's Speed And Depth Under The Keel (squat). Bank Effect (in General The Channel Walls) Simulation Consists Of The Following Calculations: 1. The Gradient Of The Bottom Rise In The Direction Of The Ship's Motion 2. Additional Arising Water Pressure Fields On The Ship's Hull; 3. Corresponding Total Forces And Moments. Modeling The Effects Of Interaction With Another Includes The Following Calculations: 1. Increased And Weakened Water Pressure Fields Occurring Around The Hulls Of Both Ships As A Function Of Approach Distance And Relative Speed; 2. Corresponding Total Forces And Moments, As Well As Their Application Points. The Library Of Own Ship Mathematical Models Should Include 55 Active Ships And Simulates The Movement Of Up To 100 Target Ships (60 Different Types, Jet Foil Hovercraft Helicopters And Airplanes) That Are Suitable For Training Purposes. The Library Of Own Ship Mathematical Models For The Bridge Simulator Should Include Tug Models That Realistically Simulate Tug Assistance When Maneuvering And Escorting. Tugs Can Be Controlled By The Instructor (automatically) And The Operator. The Simulator Includes The Ability To Simulate Pulling, Pushing, Reposition Towing And Escorting. The Tug Model Is Affected By The Own Vessel’s Speed, And As Such, Includes A Degradation Of Performance Depending On The Type Of Tug Being Simulated. It Is Possible To Work With Both Conventional And Tractor Tugs With Different Characteristics And Response Times. 1.5. The Bridge Simulator Visual System The Visual System Has An Optional Bird’s Eye Or Normal View, And The Operator’s Visual System Has A Normal View. In The Window The Instructor Can Move The Camera And Set The Yaw And Height Of The Camera. The Operator Can Activate The Binocular Mode In The Visualization System And Control The Zoom Factor, The Direction Along The Horizon And The Vertical View Of The Flight. Visual Scene Content: 1. 3 D Terrestrial Surface; 2. Controlling The Binoculars' Focal Length Settings; 3. Static Shore Objects; 4. Dynamic Coastal Objects (cranes, Vehicles, Trains, Radar Antenna Units); 5. Exercise Objects (ships, Tugboats, Helicopters, Aircrafts, Barges, Bollards, Mooring And Towing Lines, Ground Objects, Buoys); 6. Sar Objects (life Raft, Life Buoy, Mob, Sart, Helicopters, Aircrafts, Floating Debris, Damaged Tanker, Dye Marker, Oil Slick), International Flags And Pennants, Distress Signals (rockets, Parachute, Red Flare, Buoyant Smoke); 7. Aids To Navigation (buoys, Lighthouses); 8. Lights (navigational, Cultural Lights); 9. Visual Effect Of Icing; 10. Detailed Own Ship’s Bow; 11. Shadows For Vessels And Scene Objects. Sky: 1. Display Of Stars, Major Asterisms, The Moon, The Sun (according To Time Of Day And Geographic Coordinates), Clouds. Sea: 1. 3d Wavy Sea Surface; 2. Ripples; 3. Reflection Of The Sky, Sun, Clouds In The Sea; 4. Water Disturbances: Wake, Bow Waves, Foam From Breaking Waves. Weather 1. Precipitation; 2. Fog; 3. Rain Clouds; 4. Lightnings. 5. Ice 1.6 Environmental And Weather Training The Bridge Simulated Environment Consists Of: 1. Region State Window; 2. Depth Set; 3. Stream; 4. Ground Quality; 5. Wave Condition; 6. Setting The Course And Speed Of Wind; 7. Setting The Strength Of The Sea Disturbance; 8. Setting Visibility Distance; 9. Setting Local Time; 10. Changing The Reflection And Color Of The Water; 11. Changing The Intensity Of Rain, Snow, Thunderstorm And Global Cloud Cover; 12. Setting Coordinates, Heading Speed And Density Of Falls And Clouds. 1.7 Operation Training The Bridge Simulator Shall Allow For Training And Certification Of Watch Officers, Chief Officers, Captains, And Pilots Serving On Commercial And Fishing Vessels Of 500 Gross Tonnage Or More In Accordance With The Requirements Of The Imo Stcw Convention And Model Courses: • 1.07 – Radar Navigation, Radar Plotting And Use Of Arpa; • 1.08 – Radar, Arpa, Bridge Teamwork And Search & Rescue; • 1.22 – Ship Simulator And Bridge Teamwork; • 1.27 – Operational Use Of Electronic Chart Display And Information System (ecdis); • 1.32 – Operational Use Of Integrated Bridge System; • 1.34 – Operational Use Of Ais; • 2.02 – Maritime Sar Coordinator; • 3.11 – Marine Accident And Incident Investigation With Compendium; • 3.19 – Ship Security Officer; • 3.23 – Actions To Be Taken To Prevent Acts Of Piracy And Armed Robbery; • 7.01 – Master And Chief Mate; • 7.03 – Officer In Charge Of Navigational Watch; • 7.05 –7.06 – Officer In Charge Of Navigational Watch Of Fishing Vessel; • 1.25 – General Operator’s Certificate For The Gmdss; • 1.26 – Restricted Operator’s Certificate For The Gmds 1.8 Operating Environment The Bridge Simulator Shall Contain 40 Sailing Areas As Well As Sub-tasks For Each Area. This Makes It Possible To Control The Motion Of All Active And Target Ships. The Simulator Should Be Designed To Manage The Training Complex, Create (design) The Exercises, Perform The Exercises In Real Time, Monitor The Exercise Execution By Operator Workstations, Change Environmental Conditions And Sailing Circumstances, Enter The Own Ship Failure Variables, Documenting And Archiving The Position And Activity Of The Ship Involved In The Exercise. 1.9 Simulated Exercise Areas Detailed 3-d Databases With High-resolution True-color Textures Can Be Displayed By Visualization Systems. The Spatial Terrain, 3-d Radar Model And Floating Object Models Support Water Level Modeling (tidal Effect). The Database Can Include Over 1000 Models Navigational, Cultural, And Industrial Objects And Consists Of More Than 500,000 Triangles. The Databases Should Be Supplied With A Set Page | 24 Technical Description Of Enc Vector Electronic Charts Matching The Database Content For Display On Ecdis And The Instructor Workstation. The Exercise Areas Shall Include But Not Limited To: 1. Harbours 2. Channels 3. Approaches 4. Open Sea 5. Rivers 6. Canals Possible Applications (but Not Limited To Those Listed): • Pilot Training; • Mooring Training; • General Navigation Training; • Ice Navigation Training; • Consulting And Port Construction; • Demonstration And Gaming Purposes; Object Library May Include (but Not Limited To Those Listed): • 3-d Underwater And Surface Terrain; • Aids To Navigation: Buoys, Lighthouses With Light Characteristics According To The British Admiralty List Of Lights And Vector Electronic Chart, Unique Labels (numbering), Shapes (top Marks), Audio Signals And Radar Beacons; • Models Of Port Facilities – Cranes, Tanks, Chimneys, Elevators, Containers, Vehicles, Towers Etc. (from A Library Of More Than 500 Objects); • Moving Targets. • Unique And Standard Models Of Buildings And Monuments, Bridges With A Night View Representation. • Piers, Jetties, And Bollard Barrels For Mooring Training. Exercise Areas For The Radar And Visualization Scenes Should Be Available From The Areas Library. 1.9.1 Sample Exercise Areas 1. Rostock, Germany 2. Bosphorus Strait, Turkey 3. Strait Of Gibraltar 4. Tangier, Morocco 5. Accra Tema, Ghana 6. Tokyo, Japan 7. Jakarta, Indonesia 8. Singapore, Singapore 9. Vungtau Thivai, Vietnam 10. Conakry, Guinea 11. St. Petersburg, Russia 12. Kozmino, Russia Based On Common Proved Excercises Due To Sailing Routes: Europe: English Channel E+w, Europort, Dover Strait, Algeciras, Danish Strait, Antwerp, Rotterdam Middle East: Suez Canal + Gulf, Hormuz Strait Africa: Tema, Apapa, Cape Town Americas: New York, Houston, Montreal, Great Lakes, Hudson, Mississippi, Panama Canal Asia: Singapore, Shanghai, Malacca Str, Manila Oceania: Sydney, Fremantle, Melbourne, Brisbane, Adelaide 1.10 Instructor Workstation The Instructor Workstation Is An Integral Part Of The Simulator And Is Designed To Control The Training Complex, Design (develop) Exercises, Perform Exercises In Real Time, Control Exercise Performance By Trainees, Change Environmental Conditions And Sailing Circumstances, As Well As Enter Own Ship Failure Variables, Document, And Archive The Position And Activity Of The Ship Involved In The Exercise. The Instructor Station Software Should Contain Navigation Areas As Well As Sub-tasks For Each Area, Allowing The Control Of All Active Vessels And Target Ships. 1.10.1 Main Instructor Control And Monitoring Module The Software Modules Should Provide A Possibility To Flexibly Configure The Required Bridge Configuration. General: 1. An Integrated Application For Exercise Editing, Conducting And Debriefing; 2. Highly Accurate Data Representation Based On Vector Diagrams (ability To Automatically Load All Diagrams Related To The Selected Game Area); 3. Tools For Creating Exercises And Automatic Competency Assessment Scenarios; 4. Control Of Simulator Session(s); 5. Continuous Automatic Recording Of Data During Exercise (main, Audio And Video Log Files); 6. Real Time, Slow Time, And Fast Time Modes; 7. Ability To Display And Print A New Pilot Card And A Table Of Maneuvering Characteristics Of The Ship; 8. Working With Measuring Tools: • Ability To Set Erbl; • Ability To Attach, Move Or Delete Erbl During An Exercise; 9. Ability To Attach Sart To The Life Raft; 10. Ability To Move Own Ship During Exercise Without Grounding Or Collision; 11. Ability To Apply Virtual Tug Force To 8 Points Of The Vessel’s Hull In Any Direction; 12. Display Of Actual Ship's Contours; 13. Continuous Display Of Parameters Of Vessel Movement And Environment Conditions: Course And Speed Of The Vessel, Course Over The Ground, Transversal Component Of Speed On The Bow And On The Stern, Gyro Heading, Rate Of Turn, Speed And Direction Of The Current And Wind, Height And Direction Of A Wave, Depth; 14. Independent Instructor Control For Wind And Swell Components Of The Wave; 15. Ability To Set Sea State Spectrum: • Pierson-moskowitz; • Phillips; • Ittc (international Towing Tank Conference); • Jonswap (joint North Sea Wave Project); • User. 16. Ability To Exclude Hydrodynamic Interaction With Mooring Walls In The Required Area; 17. Ability To Create A Template Containing A Set Of Objects (ships), Save And Use This Template In Other Exercises; 18. Ability To Save Environment Settings As A Template And Load A Previously Saved Template In Any Exercise And Area; 19. Mooring Operations: ◦ ◻ability To Set The Rope Material; ◦ ◻ability To Set The Initial State Of The Mooring Winch (render, Slack Away, Stop); ◦ ◻ability To Set Mooring Winch Parameters (speed, Pulling Force, Holding Force); ◦ ◻ability To Operate The Mooring Winch At The Instructor Workplace. 20. Anchor Operations: ◦ ◻ability To Set User Ground Type With Required Anchor Holding Force Coefficients; ◦ ◻display Of Anchor Position On The Instructor's Chart On The Ground. 21. Control Of Navigational Lights And Shapes: ◦ ◻ability To Control The Navigational Lights; ◦ ◻ability To Switch On/off Deck Lights On Target Ships. 22. Loading/discharging Of Own Ship During Exercises; 23. Weather Conditions Manager: ◦ ◻ability To Set Predefined Weather Conditions By Beaufort Number (wind, Wave, Whitecaps And Foam, 3d Clouds, Cloud Layer, Visibility) On The Fly; ◦ ◻ability To Set Customized Weather Conditions; ◦ ◻visual Effects: Rain And Snow (low, Medium, High), Lightning, Reflection, Translucency, Sea With White Caps, Foam, Splashes, Bow-wave; ◦ ◻separate Settings For Wind Wave And Swell; ◦ ◻manual Control Of Wind Direction And Strength; ◦ ◻adjustment Of Atmospheric Parameters – Temperature, Humidity, Pressure; ◦ ◻ability To Use Thunderstorm, Precipitation; ◦ ◻automatic Calculation Of The Position Of The Sun, Moon, Major Stars (up To 100) And Constellations, The Angle And Phase Of The Moon; ◦◻ability To Set Wave Spectrum Type: Pierson-moskowitz; Jonswap (joint North Sea Wave Project); Phillips; User-defined; 24. Rcc, Ship And Coast Stating Assignment; 25. Log Module With Possibility To Print Out And Create Archives; 26. Window For Listening/monitoring Of The Radiotelephone Traffic Including Possibilities To Interfere With Radiotelephone Traffic; 27. Ability To Introduce Background Noise From A List And Instrument Faults To The Trainee Stations. 28. Ability To Change Names, Call Signs, Mmsi, Telex Numbers And Inmarsat Mobile Numbers Of All Emulated Ship Stations And Coast Station According To The Needs Of Different Exercises; 29. Electronic Chart With Vessel Position Indication And The Ability To Change Position, Course And Speed; 30. Ability To Display And Instantly Change Trainee Station Positions On The Electronic Map For Search And Rescue (sar) Exercises; 31. Full Monitoring Of Any Trainee Workstation – The Ability To Monitor The Status Of Each Gmdss Unit And Listen To The Radio Traffic Of Each Trainee Station; 32. Connection To An External Printer; 33. Connection To An Active Speaker For Simultaneous Viewing Of Channels; 34. Providing Functions Of A Coast Telex Or Telephone Subscriber, Coast Radio Station And Rcc Operator From The Log Window; 35. Status Window For All Instruments At Any Workstation; 36. Ability To Log Communication And Trainee Actions For Playback And Later Review; 37. Database Of Coastal Stations, Navtex And Msi Stations And Inmarsat Shore-based Stations Plotted On The Chart; 38. Information About The Gmdss Sea Areas On The Chart; 39. Approximate Estimation Of Radio Wave Propagation In The Selected Frequency Range; 40. Evaluation And Assessment Module; 41. Navtex Functionality: ◦ ◻ability To Send Navtex Messages On Behalf Of A Navtex Station; ◦◻ability To Edit And Use The Navtex Station Used-defined List; ◦◻ability To Save And Use Navtex Message Templates. 42.“intercom” Panel. To Monitor Intercom Communication, Execute Voice Messages From The Instructor's Side. 43. Vhf Radio Station Module. To Monitor Vhf Communication, Send Voice Messages From The Instructor’s Side, Play Pre-recorded *.wav Files. 44. Coastal Radio Station Module. Screen Layout: 45. Use Of The Mouse Wheel For Chart Centering And Scaling; 46. On-screen Display Of Mooring Walls And Piers; 47. On-screen Display Of Actual Contours Of Any Ship; 48. On-screen Display Of The Object’s Route Line And Its Actual Track; 49. On-screen Display Of The True And Relative Speed Vectors; 50. Selectable Display Mode: True Motion, Relative Motion, Course Up Or North Up; 51. Display Of Prompt And Other Information In The Status Bar: ◦ ◻bearing And Distance From The Current Cursor On-chart Position To The Reference Point; ◦ ◻coordinates Of The Current Cursor On-chart Position; ◦ ◻depth In The Current Cursor Position; ◦ ◻current Exercise Time (absolute And Relative). 52. Displaying Of Object Tracks: Contour Or Point With Selectable Resolution, Track History And Time Stamp; 53. Displaying Of Walls And Piers; 54. Use Of A Mouse Wheel For Chart Centering And Scaling; 55. User Configurable Workplace; 56. Different Panels For The Control And Monitoring Of The Exercise Fulfillment: ◦◻reports Panel – To Form And Print Exercise Fulfillment Reports; ◦◻ Ship Info Panel – To Display Courses, Longitudinal And Transverse Speeds, Rates Of Turn For All The Ships Involved In The Exercise. ◦ ◻evaluation And Assessment Module Panel; ◦ ◻target Panel – To Control Vessel Target And Flight And Sar Objects; ◦ ◻objects Panel – To Promptly Select An Object On The Chart From The List Of All The Objects Available In The Exercise; ◦ ◻flags Panel – To Hoist/lower Ics Flag Signals On Any Of The Ships, Including Ability To Set And Keep Flag Templates ◦ ◻events Panel – For The Automatic Recording Of Any Important Events Related To The Incorrect Trainee Actions; ◦ ◻flash Light Panel – To Send Light Signals From Target Vessels, Including Automated Translation Into Morse Code; ◦ ◻magnetic Deviation Panel – To Configure The Magnetic Deviation Panel For The Vessels, Participating In The Exercise, Save The Panel And Apply Desired Template To Any Own Vessel, Print The Magnetic Deviation Table; ◦ ◻procedural Alarms Panel – For Defining User Set Of Alarm For Dedicated Vessels. 57. Setting Navigational Equipment Parameters And Faults: Radar, Gps, Loran C, Log, Gyro, Echo Sounder, Uais; 58. Setting The Exercise Weather And Bathymetric Conditions: Global And Local Zones, Import Of Tide And Current Databases;observing Own Ships And Targets On The Chart: Ship Info Panel, Cpatcpa Panel, Events Panel; Observing Own Ships And Targets On The Chart: Ship Info Panel, Cpatcpa Panel, Events Panel; 59. Control Of Own Ships And Targets On The Chart: Direct Control Of Steering And Propulsion Systems, Autopilot, Mooring Lines, Anchors; 60. Setting Faults Of Navigational Equipment, Steering And Propulsion System, Fire And General Alarms; 62. Continuous Data Logging During Exercises; 61. Playback Of Recorded Exercises In Real And Fast-time Modes; 62. Performing Preliminary Exercises On The Map To Check Their Suitability For Training On The Simulator; 63. Distress Signals (flare, Smoke Signals, Dye Markers); 64. Adding New Target Ships; 65. Changing Weather Conditions; 66. Moving Buoys, Turning Off Lights On Them And Hiding Them On Both The Visualization System And Radar; 67. Control Of Automatic Tugboats On Commands From The Bridge Or From The Instructor; 69. Generating And Printing Exercise Reports Exercise Objects: 1. collection Of 6-dof Ship Models; 2. Sar Objects: Life Raft, Mob, Damaged Tanker, Sart, Damaged Burning Tanker, Search And Rescue Transponder (sart), Emergency Position 3. Indicating Radio Beacon (epirb), Oil Slick, Helicopter Target, Aircraft Target, Floating Debris; 4. Mooring Objects: Bollard On Any Of Mooring Walls, Bitts On Another Ship, Bollard On Any Of Mooring Walls, Bitts On Another Ship, Mooring Buoy Of Catenary Anchor Leg Mooring (calm), Mooring Buoy Of Single Anchor Leg Mooring (salm); 5. Coastal Objects: Moving Cranes, Cars, Trains, Radar Antennae, Rocket Launcher, Hangar, Cistern, Signal Port Station Tableau, Etc.: Visual And Radar Images; 6. Global And Local Weather Zones: Wind, Current, Sea State, Visibility, Precipitations; 7. Fishing Objects: Fish Shoals, Underwater Pinnacles, Fishing Buoys, Lines And Zones; 8. Sound Velocity In The Water Affecting The Performance Of Hydroacoustic Fish Finder Equipment; 9. Rain Clouds; 10. Fog Areas; 11. External Tide And Current Data (enc Databases); 12. Display Of Wave And Current Strength And Direction At Any Point In The Exercise; 13. Adjustment Of The Ship Model Characteristics; 14. Setting Operation Modes Of Navigational Aids, Their Errors And Malfunctions: Radar, Gps, Loran-c, Log, Gyro, Sounder, Uais; 15. Performing Preliminary Exercises On The Map To Check Their Suitability For Training On The Simulator; • ◻control Of Own Ships And Targets On The Vessel: Direct Control Of Steering Gear And Propulsion, Autopilot, Mooring Lines, Anchors; • ◻control Of External Forces On The Chart (virtual Tug Force) Applied To 8 Points Of The Ship Hull In Any Horizontal Direction Along The Waterline; •◻saving An Exercise With Initial Conditions At Any Stage Of Playback. Trainee Mission Explaining: • ◻loading A Previously Created Exercise On A Chart; • ◻playing The Exercise On The Chart To Explain The Task; • ◻uploading A Sample Log Of The Same Exercise To Explain The Correct Actions. Simulator Session(s) Control: • ◻exercise(s) Start, Pause, Re-start After The Pause, Stop On Bridge(s); • ◻setting The Initial Position For Own Ships; • ◻entering Faults Of Navigation Systems, Steering Gear, Propulsion Plant, Fire And General Alarm; • ◻ability To Set Faults Of Navigational Equipment; • ◻pulling Apart Ships That Have Collided Or Run Aground; • ◻control Of Target Vessels, Hoisting Flags Of The International Code Of Signals, Turning Their Sound Signals On And Turning Their Lights On/off; 16. I Cs-69 Flags (international Flags And Pennants): • ◻26 Alphabet Flags; • ◻10 Numeral Pennants; • ◻3 Substitute Pennants; • ◻1 Answering Pennant. • ◻control Of Daylight Shapes On Vessels; • ◻distress Signals (flare, Smoke Signals, Dye Markers); • ◻changing Weather Conditions; • ◻adding New Target Ships; • ◻moving Buoys, Turning Off Lights On Them And Hiding Them On Both Visualization System And Radar; • ◻controlling Automatic Tugboats On Commands From The Bridge Or From The Instructor; • ◻using The Report Generator Wizard Tool For Printing. Own Ship Simulation Data: On Request, The Following Readings And Characteristics Of The Own Ship Are Displayed On The Monitor Of The Instructor's Workstation: • ◻vessel Number, Designation And Model Type; • ◻main Dimensions; • ◻displacement; • ◻ship’s Time; • ◻ship’s Gyro-compass Course Over Ground And Through Water; • ◻longitudinal And Transverse Components Of Speed Through Water; • ◻ship Speed Over Ground And Through Water; • ◻bow Velocity And Stern Velocity Over Ground; • ◻heeling, Trim And Center Of Gravity Elevation; • ◻angular Speed Of Ship Turns; • ◻current Rudder Blade Position And “put The Rudder Over” Command; • ◻current Position Of Propeller(s) And Pitch Change Command; • ◻current Rotation Speed Of Propeller(s); • ◻current Load Of Main Engine(s); • ◻thrusters Operating Mode; • ◻geographic And Cartesian Coordinates Of Vessel Location; • ◻distance Traveled By The Vessel From The Exercise Start Point; • ◻depth Under The Ship’s Keel; • ◻distance And Bearing Relative To Any Active Ship; • ◻cpa And Tcpa From Any Ship To Other Vessels. Passive Ships (target-ships) Simulation Data: • ◻on Request, The Following Indicators And Motion Characteristics Of The Target Ship Are Displayed On The Instructor's Workstation: • ◻target Ship Number And Type; • ◻cog; • ◻sog; • ◻geographic And Cartesian Position Coordinates; • ◻distance And Bearing Relative To Any Active Ship; • ◻the Coordinates Of The Route Change Point And The Time To Pass That Point. Evaluation And Assessment Module: The Evaluation And Assessments Module Are Designed For The Evaluation And Assessment Of A Range Of Predefined Assessment Parameters From The Following Categories: • ◻planning And Conducting A Passage And Determine Position; • ◻maintain Safe Navigational Watch; • ◻using Radar And Arpa To Maintain Navigational Safety; • ◻ability To Operate And Analyze Information Obtained From Arpa; • ◻respond To Emergencies; • ◻use Imo Standard Marine Communication Phrases And Use English In Writing And Speaking; • ◻transmit And Receive Information Using Visual Signals; • ◻maneuver The Ship; • ◻colreg. The Bridge Simulator Should Have The Ability To Set Up A Scoring And Grading System To Evaluate The Operator’s Performance. The Program Allows The Instructor To Monitor The Results Of The Bridge Team / Operator Workstation Performance During The Following Scenarios: 1. Own Ship Collision; 2. Own Ship Collision With A Beacon; 3. Running Aground On Own Ship; 4. Distances For Channel Coast; 5. Own Ship Collision With Another Vessel; 6. Own Ship Collision With The Shore; 7. Own Ship’s Anchor Chain Breakage; 8. Own Ship’s Mooring Line Breakage; 9. Engine Overload. For Each Item The Following Can Be Recorded: • ◻time • ◻position; • ◻depth; • ◻distance Traveled; • ◻hdg; • ◻cog; • ◻log • ◻sog; • ◻angular Velocity; • ◻prow. Doppler Velocity; • ◻stern Doppler Velocity; • ◻ort. Velocity; • ◻list; • ◻trim; • ◻engines Controller Position; • ◻main Engines Load; • ◻vpp Angles; • ◻propellers Rpms; • ◻rudder Setter; • ◻rudder Blade Position; • ◻thrusters Loading. 1.10.2 Instructor Module’s Main Screen General Requirement: 1. Integrated Application For Editing, Running And Debriefing Exercises. 2. High-quality Vector Chart Representation With The Ability To Load Multiple Charts; 3. Displaying Of The Actual Ship Contours; 4. Display Of Object Tracks: Contour Or Point With Selectable Resolution, Track History And Time Stamps; 5. Display Of Walls And Piers; 6. Displaying Of True Or Relative Velocity Vectors; 7. Display Mode Selection: True Or Relative Movement; 8. Using The Mouse Wheel For Chart Scaling; 9. User Configurable Workplace; 10. Setting Parameters And Faults Of Navigation Equipment: Radar, Gps, Loran C, Log, Gyro, Echo Sounder, Uais; 11.s Etting Weather And Bathymetric Conditions: Global And Local Zones, Import Of Tide And Current Databases (ecdis); 12. Monitoring Own Ships And Targets On The Chart: Ship Information Page Including Events Panel, Environment Page, Stats Page Including Cpa-tcpa Panel; 13. Monitoring Own Ships And Targets On The Chart: Direct Control Of Steering And Propulsion Systems, Autopilot, Mooring Lines, Anchors; 14. Setting The Navigational Equipment Faults, Steering And Propulsion, Fire And General Alarms; 15. Continuous Data Logging During Exercises; 16. Live And Fast-time Playback Of Recorded Exercises; 17. Generation And Printing Of Exercise Reports. Exercise Objects: 1) Collection Of 6-dof Ship Models; 2) Sar Objects: Life Raft, Mob, Damaged Tanker, Sart, Helicopter Target; 3) Global And Local Weather Zones: Wind, Current, Sea State, Visibility, Precipitation; 4) Rain Clouds; 5) External Tide And Current Data (enc Databases). Uais Training: 1. Ability To Configure Own Ship And Target Ship Parameters For Ais Position, Ship Static And Voyage Related Data Reports; 2. Possibility To Send Ais Messages To Own Ships; 3. Possibility To Monitor The Exchange Of Ais Messages; 4. Ability To Enter Fault Data Into The Ais Transponder. 1.10.3 Instructor Gmdss Module The Instructor Gmdss Module Of The Bridge Simulator Should Have The Following Abilities: • ◻ability To Connect To The Gmdss Simulator; • ◻continuous Audio Logging Of Information Exchange From The Operator Workstation On The Bridge (requires A Gmdss Module); • ◻exercise Monitoring With A Video Camera (requires An Additional Visualization Module); Radar Exercise Monitoring (requires An Additional Radar/arpa Simulation Module 1.11 Radar / Arpa Module • ◻the Bridge Simulator (radar/arpa) Module Should Have The Following Capabilities • ◻arpa/radar Software On The Bridge; • ◻selective Radar On The Instructor Workstation; • ◻radar Simulator On The Bridge; General Information: • ◻display Simulations Of The Following Radar Types: Target Tracking (arpa/ais): • ◻full Tt Functionality; • ◻plotting Up To 100 Targets; • ◻displaying Up To 1,000 Ais Targets; • ◻the Ais Symbol Shows Whether A Target Is A Sleeping Target, A Normal, A Selected, A Dangerous Or A Lost Target. Automatic Acquisition Zones: • ◻the Two Auto-capture Zones Can Be Set In A Sector Or In Any Shape; • ◻targets In The Auto-capture Zone Are Displayed With A Reverse Triangle; • ◻the Operator Can Manually Acquire Important Targets Without Restriction, Which Is An Important Aid And Source Of Information For Evaluating The Situation. Guard Zones And Anchor Watch Zone: • ◻guard Zones Generate Visual And Audible Alarms When Targets Enter Zones Set By The Operator; • ◻one Of The Guard Zones Can Be Used As An Anchor Watch To Alert The Operator When Own Ship Or Targets Drift Outside The Set Zone. • ◻radar Simulator On The Bridge; Cpa Alarm: • ◻the Target Tracking Symbol Changes To A Triangle When Its Predicted Course Deviates From The Operator’s Set Cpa/tcpa; • ◻the Operator Can Easily Change The Vector Length To Estimate The Trend Of The Target’s Movement. Target Trials: • ◻the Target Trail Feature Generates Single-color Or Gradual Shading Afterglow On All Objects On The Display To Help Clarify The Traffic Situation; • ◻echo Trails Can Be Displayed In Either True Or Relative Motion; • ◻relative Trails Show Relative Motion Between Targets And Own Ship; • ◻true Motion Trails Require A Gyrocompass Signal And Own Ship Speed Input To Cancel Own Ship Motion And Represent The True Motion Of Targets According To Their Speeds And Courses Over The Ground. Radar Map: • ◻a Radar Map Is A Combination Of Lines And Marks That Operators Can Use To Define And Enter Data About The Navigation Area And Route; • ◻the Radar Map Can Be Saved To Facilitate Reuse In A Frequent Navigation Area; • ◻planned Routes Created On The Ecdis Can Be Transferred Onto The Radar Display When Connected To The Ecdis Network. Radar Keyboard: • ◻full Control – All Radar Operations Can Be Performed Using The Keyboard Or On-screen With The Ps Trackball; • ◻actual Marine - Approved Radar Keyboard • ◻dedicated Buttons For Basic Functions; • ◻large, Easy-to-use Analog Controls For Ebl, Vrm, Gain, Sea And Rain. 1.12 Ecdis Module Dnv Type-approved Ecdis And Must Meet The Requirements Of The Following Regulations/ Standards: Solas 74, Reg. V/18.1, V/19.2.1.5, 2000 Hsc Code 13.8, 13.17.1, Imo Res. A 817(19) As Amended By Msc.64 (67) Annex 5 And By Msc.86(70) Annex 4, Imo Res.a.694(17) And Developed In Accordance With The Imo/iec Requirements For Integrated Navigation Systems (draft Iec 61924). Areas Of Application: 1. Bridge Task Application For The Training In The Use Of An Electronic Chart Display And Information System; 2. Ecdis Software On The Bridge; 3. Selective Ecdis On The Instructor Workstation; 4. Ecdis Simulator On The Bridge. General Information: 1. Compatible Cartography: ◦ I◻ho/ S-57 Edition 3 Vector Chart (iho S-63 Data Protection Scheme); ◦ ◻arcs Raster Chart; ◦ ◻enc ◦ ◻dnv Type Approved Senc Format, Cm-93/3 ◦ ◻perpetual License ◦ ◻compatibility With Admiralty Information Overlay (aio) For Further Navigation Safety. 2. Interface With Position Sensors, Gyro, Log, Echo- Sounder And Radar For Radar Overlay, Target Track Info, Route, And Waypoint Exchange. 3. Ecdis Operating Modes: ◦ ◻monitor Mode, Ship’s Behavior Can Be Monitored Relative To The Planned Route. A Variety Of Voyage Monitoring Tools Are Built Into The Instant Access Panel; ◦ ◻chart Maintenance Mode, Allows Operators To Work With Charts To Be Used In The System; ◦ ◻plan Mode, Operators Can Generate And Edit Route Plans As Well As Custom Charts. It Is Also Possible To View Various Detailed Reports Generated By Ecdis On Planned Routes And Custom Charts. 4. Route Planning: ◦ ◻operators Can Use The Trackball To Enter Waypoints Directly Onto The Chart; ◦ ◻operators Can Edit The Name, Steering Mode, Radius, Channel Limit And Other Parameters Of Waypoints. 5. Creating User Chart: ◦ ◻operators Can Create A Custom Chart; ◦ ◻a User Chart Is A Layer Consisting Of Marks And Lines That Can Be Created And Overlaid On The Chart; ◦ ◻user Charts Are Intended For Marking Safety-related Areas And Objects. 6. Quick Access To Various Reports: ◦ ◻route Reports On Waypoint And Passage Plan, As Well As User Chart Reports On Tidal, Lines, User-entered Objects And User-defined Areas Can Be Accessed Directly For Viewing. 7.marine Type Approved Keyboard: ◦ ◻panel-mounted Silicone Rubber Keyboard With Built-in Waterproof 25mm Trackball And Scroll Function; ◦ ◻fully Certified To Iec60945, Iacs E10, Iec 60092-504, Dnv 2.4. 1.13 Conning (conning Display) Module The Program Should Be Designed For Ship Handling, Mooring, Automatic Tug, And Navigational Instruments. Multi-level "call-up" Pages Of The Conning Display: 1. General Characteristics, Me And Autopilot Controls (“main” Page); 2. Mooring Gears And Roll And Pitch Controls (“anchor & Mooring” Page); 3. Repeater Gyrocompass And Satellite Compass (“compasses” Page); 4. Anemometer, Digital Barograph, Water And Air Temperature And Humidity Sensors (“environment” Page); 5. Binoculars Control, Observer Position Control, Searchlight Control (“light & View” Page); 6. Signal Flags, Sound Signals And Figures (“signals” Page); 7. Own Ship Data (page "ship"); 8. Fire Alarm Control Panel And Alarm List (page "alarm"); 9. Azimuth Propeller Thruster Control, Azimuth Indicators, Thruster Indicator Loading (page "azimuth"); 10. Vhf Radio (page "vhf"); 11.i Ntercom (page "intercom"); 12. Echo Sounder (page "echo Sounder"); 13. Pilot Card (page "pilot Card"); 14. M Aneuvering Table (page "maneuvering Table"); 15. Training Result And Vdr (page "assessment/vdr"). Main Features: 1. Rudder Position Master Operation Mode Setup; 2. Rudder Position Presetting; 3. Setting The Operating Mode Of The Bow Thruster And Aft Thruster; 4. Autopilot Control; 5. Setting The Limit For The Signal Response To A Hazardous Depth Under The Keel; 6. Me Control; 7. Initiation Of The Binoculars; 8. Setting The Observer’s Angle Of View Relative To The Horizon And Vertical Line; 9. Setting The Observer’s Position In The Visualization System; 10. Control Of Sound Signals, Lights And Figures; 11. Control Of The Anchoring Gear, Mooring Lines And Fenders When Mooring To A Quay And Vessel; 12. Tug Control. Information Display: 1. Values Of Propeller Shaft(s) Revolutions; 2. Control Pitch Propeller Turning Angle Values; 3. Rudder Responding Values; 4. Rate Of Turn Angular Velocity Values; 5. Operation Mode Of The Bow Thruster And Aft Thruster; 6. Gyro Compass And Magnetic Compass Course; 7. Log Speed And Speed Over The Ground; 8. Bow Thrust And Stern Speed; 9. Wind Speed And Direction (true/relative); 10. Speed And Direction Of Streams (current); 11. Date & Time Of Ship; 12. Distance Traversed; 13. Depth Under Keel; 14. Ship’s Geographical Coordinates; 15. Distance From Ship To Shore; 16. Me Loads; 17. Heel And Trim Of The Vessel; 18. Anchor Chain Length, Water Angle; 19. Length Of Mooring Lines; 20. Fire Detection Control System, List Of System Failures Alarms; 21. Vhf Point With Channel Selector; 22. Pilot Card, Maneuvering (wheelhouse Poster); 23. Assessment & Vdr. 1.14 Steering Control (multi-touch Pc) Module This Module Should Have The Following Capability: The Hdg Main Is The Start Page Of The Display For The Heading Control Mode Operation. The Hdg Main Page Is Accessible Via The Corresponding Soft Key Of The Operation Mode. The Nav Main Is The Start Page Of The Display For Operation In Waypoint Steering Mode. The Nav Main Page Is Accessible Via The Corresponding Operation Mode Soft Key. The Connected Route Planning System Generates All Necessary Data For Waypoint Steering. The Nfu/fu Display Page Has Two Rudder Setting Options: • ◻the Nfu Mode: Rudder Angle Is Set Using The Control Keys; • ◻the Fu Mode: Entry Of The Rudder Angle Value With The Rotary Knob. 1.15 Propulsion Control (multi-touch Pc) Module This Module Should Have The Following Capability: • ◻speed Digital Indicator Of Speed In Knots; • ◻main Engine Port And Main Engine Stbd Gauges To Display Rpm, Pitch And Speed Shaft Values Of Respective Me; • ◻two Emergency Engine Order Telegraphs (eeot) For Use In Case Of Machine Telegraph Failure; To Operate The Eeot Turn The Central Knob To The Required Position On The Scale; Corresponding Button Starts Flashing And Buttons Flash On The Telegraph Repeaters In Ecr And Engine Room Lop; At The Same Time Audible Signal Starts; When The Command Is Confirmed At The Ecr/er, The Button Lights Up Continuously On All Telegraphs And Audible Signal Stops; • ◻e/r Deadman System Lamps Light Up To Indicate The System Status: System On And E/r Deadman Alarm; • ◻thruster Control Display For The Bow And Stern Thruster Control; • ◻generator Status Indication; • ◻control Of Rudder Pumps And Synchronization Of Rudder Fu Mode. 1.16 Navigation Aid Instruments Module Areas Of Application: • ◻bridge Task Application. The Program Is Designed To Simulate Satellite Navigation Systems And Shore-based Radio Navigation Systems; • ◻data Generated By This Module Are Transmitted To Ecdis, Radar/arpa And Auto-pilot. 1.16.1 Marine Gps Areas Of Application: 1. Automatic And Manual Operation Modes; 2. Position Indication, Geodesic Datum; 3. Waypoint Input And Storage; 4. Dead Reckoning Mode; 5. Steering Data Computation; 6. Man Overboard; 7. Instructor-controlled Faults And Errors: Power Failure. 1.16.2 Ais 1. Manual Data Entry, Updating And Data Retrieval Using The Minimum Ais Display Simulator; 2. Manual Data Entry, Updating And Data Retrieval Using The Ecdis Simulator And/or Radar; 3. Transmission Of Dynamic Information At Intervals Consistent With Applicable Requirements; 4. Periodic Automatic Transmission Of Static Information To Coastal Stations And Other Vessels Equipped With Ais Equipment; 5. Receiving And Processing Information From Coastal Stations And Other Vessels; 6. Sending Response Messages With Minimum Delay To Safety Or High Priority Requests; 7. Transmitting Ais Data Of Target Vessels To Radar Simulator For Display; 8. Transmitting Ais Data Of Target Vessels To The Ecdis Simulator For Display. 1.16.3 Bnwa System 1. Provides Light And Sound Signals To Attract The Attention Of The Officer On Watch And, If The Officer Does Not Respond, To Alert The Simulator Instructor; 2. The Bnwa Simulator Operating Modes, The Sequence Of Light And Sound Signals, And The Characteristics Of The Light And Sound Signals Meet The Requirements Of Imo Resolution Msc.128 (75). 1.16.4 Navigation Echo Sounder 1. Depth Measurement From 1 To 200 M; 2. Audible Alarm When The Vessel Reaches The Target Depth; 3. Manual Depth Setting; 4. Depth Information Display In Two Forms Simultaneously: ◦ In A Graphic Form, Displaying The Depth Profile On The Ship's Path; ◦ In Numerical Form Showing The Current Depth. 1.16.5 Doppler Speed Log 1. Display Of The Vessel’s Speed Relative To Water And Relative To The Ground; 2. Distance Traveled Display; 3. Transmission Of Vessel Speed To Radar, Ecdis And Ais Simulators. 1.16.6 Vdr Remote Alarm Panel The Interval For Recording Various Data, Including Sound, Is As Follows: 1. Radar / Ecdis Video Signals: Every 15 Seconds; 2. Audio Data Of Bridge And Vhf Conversations: In Real Time; 3. Proposals In Iec Format: Upon Receipt; 4. Analog And Digital Data: Every Second. 1.17 Bearing Finder 1. Bridge Task Application. Program Represents A Visual Channel (visual) With A Capability To Accurately Measure The Observation Angle. 2. Telescoping Bearing Sight With Optical Magnification 3. Level Indicator For Horizontal Alignment Of The Bearing Repeater 4. Accuracy Of Azimuth And Elevation Angle Settings Is 0.1degree. 1.18 Pelorus Stand – Bearing Repeater Gyrocompass 1. The Gyrocompass Is Essentially A North-seeking Gyroscope And Which Is Connected By Cables To Gyro Compass Repeater Located Through The Ship. 2. The Pelorus Is A Key Instrument In Piloting The Ship Closed To Shore And Obtaining The True Direction Of Nearby Ships. 3. The Pelorus Is Mounted On The Center Of Bridge Used As The Most Accurate Reference. 1.19 Overhead Display Mode Areas Of Application: • ◻ Bridge Task Application. The Program Is Designed For Overhead Display Simulation. • ◻ This Module Should Run On Separate Pcs. The Sensor Can Be Set For Each Display And Each Output Type For Single, Dual, Or Triple Display. The Location Of The Displays Can Be Changed And Configured To Match The Display Type. Information Displayed: 1. Engine Load; 2. Engine Rpm; 3. Propeller Pitch; 4. Speed Of Log; 5. Heading; 6. Passed Distance; 7. Vessel Time; 8. Doppler; 9. Rate Of Turn; 10. Rudder Angle; 11. Pitch And Roll; 12. Depth; 13. Wind Speed And Direction. 1.20 Gmdss Operator Module The Gmdss Operator Module Should Simulate The Electromagnetic Environment Affected By: 1. Operator-controlled Radio Stations On Vessels; 2. Coastal Stations; 3. Rescue Coordination Center Radio Stations; 4. Distortion Induced By Propagation Interference. The Software Should Simulate The Operation Of The Following Gmdss Devices: 1. Vhf Radio Station With Dsc Vhf, 2. Mf/hf Radio Station With Dsc Mf/hf, 3. Mf/hf Mf/hf Radio Telex; 4. Inmarsat-c Ses, Egc Rx With Lrit And Ssas, 5. Inmarsat Fleet Broadband, 6. Iridium Gmdss Satellite Communication System; 7. Inmarsat-b Ship Earth Station Nera Saturn-b (optional); 8. Inmarsat-fleet 77 Ship Earth Station Nera –f77 (optional); 9.two Band Receiver Navtex, 10. 2182 Khz Watch Receiver; 11.c Ospas-sarsat Epirb; 12. Sart Tron Sart 20, 13. Ais Sart Tron Ais Sart; 14. Two-way Vhf Radio Station Tron Tr 30 Gmdss And Maritime Vhf Radio; 15. Vhf Radio For Two-way Communication Between Vessel And Aircraft, Tron Tr 30 Air, 16. Mcmurdo Fast Find 220 Plb; 17. Plb Ais Mcmurdo S20; 18. Gmdss Alarm Panel 19. Radio Direction Finder Rt-500-m (marine); 20. Power Switchboard 21. Battery Charger; 22. Virtual Printer. 2.0 Main Instructor Station 2.1 Instructor Station 2.1.1 License Of The Navigation Instructor Navigation Instructor Software Includes: 1. Navigation Instructor 2. Evaluation And Assessment 3. Tug And Mooring 4. Radar/arpa 5. Enc: • ◻dnv Type Approved • ◻senc Format, Cm-93/3 • ◻perpetual License Bird Eye Of Instructor 6. Debriefing System 2.1.2 License Of The Gmdss Instructor Gmdds Instructor Software Includes: 1. Gmdss Instructor 2. Group 3. Setup 4. Maps 5. Equipment Status 6. Knowledge Test 7. Estimated Results By The Program 8. Scenario Editor Of The Estimator 9. Software Control Of The Handset 2.1.3 Coastal Radio Stations Coastal Radio Stations Includes: 1. Coastal Radio Stations 2. Sar Coordination Center Radio Stations 3. Radio Disturbances 2.2 Instructor Station Table And Computers 2 2.2.1 Instructor Station Table Instructor Station Table Specification: 1. Table Size: L 2300 X W 700 X H 750 Mm 2. Material: Formica Matt Laminate On Chipboard 3. Ergodynamic Chair 1 Unit 2.2.2 Instructor’s Computer 2.2.3 Instructor Station 1 1 Pc • ◻computer: • 2x 24” Monitor O1 X Pc • Intel Core I5 Processor O1 6 Gb Ram • 256 M.2 Ssd • R Tx 4070 Or Higher O1 X Keyboard/mouse • 1 X Ups 1.5kva 1 Pcs • ◻printer: • 1 X Laser Printer A4 • A4 Print Speed Up To 48 Ppm • Auto 2-sided (duplex) Printing, 1-line Lcd • Wifi, Airprint, Mopria, Wifi Direct, Lan, Usb 2.0 • Colored Printer Set • ◻nas And Exercise Server • N As Disk Station Quadcore Processor O2 X 4 Tb Hdd Set • ◻drone View Monitor (environment View Of Instructor) • ◻smart Tv • W/ 55” Tv Led 1 Unit 2.2.4 Instructor Station 2 ◻requirements: • 2x 24” Monitor • 1x Pc • Intel Core I5 Processor • 16 Gb Ram • 256 M.2 Ssd • Rtx 4070 Or Higher • 1x Keyboard/mouse • 1x Ups 1.5kva 1 Unit 2.2.5 Server Station Requirements: • ◻computer: • 1x 24” Monitor O1 X Pc • Intel Core I5 Processor O1 6 Gb Ram • 256 M.2 Ssd • Rtx 4070 Or Higher O1 X Keyboard/mouse • 1 X Ups 1.5kva 1 Unit 2.2.6 Handset Handset Includes: 1. Handset 2. Cradle With A Ptt Switch 3. Usb Interface Board 4. Handset Box 1 Unit 2.2.7 Speaker Speaker Requirements: 1. Type: Desktop 2. Port: Mini Jack 3. Power: Usb 1 Unit 2.2.8 Network Switch Network Switch Specifications Manage: 24 Ports 10/100/1000mbps Rj45 Ports Set 2.2.9 Cctv Monitoring 1 Pc Nvr Atleast 16 Channel 9 Pcs 6 Mp Fixed Dome Network Camera With Mic 2 Pcs 8 Mp Bullet Camera With Mic 2 Pcs 6tb Storage (design For Cctv) 1 Pc Network Poe Switch Specification: 24 Ports 10/100/1000mbps Rj45 Ports 1 Lot >upvc, Conduit, Pull Box, Fittings, Hanger, And Support And Other Materials If Needed. Including Utp Cat6 Shielded Pure Copper, Fiber Optic Cable. >installation, Engineering Labor For Entire Project. Cable Laying, Labeling, Harnessing, Project Management, Mobilization And Di-mobilization 3.0 Main Bridge Simulator Software 3.1.1 Conning Display Conning Display Software Consisting Of: 1.main Features A) Rudder Operation Mode Setup B) Rudder Presetting C) Bow & Stern Thruster Presetting D) Autopilot Control E) Signal Response Limit Presetting F) Me Control G) Binocular Initiation H) Observer’s Vision Angle Presetting I) Observer’s Position Presetting J) Sound Signals, Lights & Figures Control K) Anchor Gear, Mooring & Fenders Control L) Tugs Control 2. Information Display A) Propeller Shaft(s) Revolutions Values B) Turning Angle Of Cpp Value C) Rudder Responding Value D) Angle Of Rate Value E) Gyro & Magnetic Compass Course F) Log Speed & Speed Over Ground G) Load Of Bow And Speed Of Stern H) Velocity & Direction Of Wind (true/relative) I) Velocity & Direction Of Stream (current) J) Ship Date & Time K) Traversed Distance L) Depth Under Keel M) Distance From Shore N) Me Loads O) Ship Heel And Trim P) Fire Detection Control System, System Failures Alarms List Q) Vhf Point With A Channel Selector R) Pilot Card, Maneuvering S) Assessment & Vdr T) Arpa Keyboard Control 3.1.2radar/arpa Display Radar/arpa Software Consisting Of: 1. Imitating Display Of Raday/arpa A) Range Scale B) Display Modes: Head Up, North Up, Tm, Rm C) Display Of Charts Of The Region 2. Arpa A) Acquisition Modes B) Target Canceling Modes C) Target Data Output Time D) Target Information E) Visual & Acoustic Alarms F) Cpa, Tcpa Limits Setting G) Trial Maneuver 3. Radar Parameter A) Operating Frequency (s-band, X-band) B) Antenna Rpm (20, 6- Rpm) C) Direction Pattern Width (vertical, Horizontal) D) Antenna Height & Tilt Angle E) Blind Sectors 3.1.3 Ecdis Display Ecdis Software License Consisting Of: 1. M Ulti Chart Loading 2. Chart Info 3. Chart Orientation (north Up, Head Up, Course Up) 4. Alarms (ais, Anti-grounding, Sensors, Route, Radar/target, Chart Areas,) 5. Ship Motion Data (cog, Sog, Hdg, Log) 6. Erbl For Measuring Bearings And Ranges 7. Two Modes Of Displaying (true, Relative) 8. Mob Mode 9. Routing Planning, Checking And Monitoring 10. Work With Multiple Routes 11. Interface With Position Sensor, Gyro, Log, Echo- Sounder, Arpa 12. Radar Overlay 3.1.4 Electronic Navigation Chart 1. Dnv Type Approved 2. Senc Format, Cm-93/3 3. Perpetual License C-map Professional+ Is An Innovative And Dynamic Worldwide Vector Chart Database Produced By Jeppesen Marine. Dnv Type Approved Senc Format, Cm-93/3 3.1.5 Bearing Finder Display Bearing Finder Software Consisting Of: 1. G Yro Mode 2. Magnetic Compass Mode 3. Determine The Bearing Control 4. Direction Finder Elevation Control 3.1.6 Navigation Aid Instruments 1.marine Gnss Gps A) Automatic And Manual Operation Modes B) Position Readouts, Geodesic Datum C) Way-points Input And Storage D) Dead Reckoning Mode E) Steering Data Computing F) Man Overboard G) Faults And Errors Controlled By The Instructor 2. Ais Features: A) Automatic Transmission Of Static Information To Coast Stations And Other Vessels With Ais Equipments B) Reception And Processing Of Information From Coastal Stations And Other Vessels C) Sending Response Messages With Minimum Delay To Security Or High Priority Requests D) Target Vessels Ais Data Transmission 3. Bnwa System Features: A) Provides Light And Sound Signals To Attract The Attention Of The Officer In Charge Of The Watch B) Operation Modes With Imo Resolution Msc.128 4. Echo Sounder Features: A) Measurement Of Depths From 1 To 200m B) Ship Exiting To A Given Depth Sound Signal C) Manual Setting Of A Given Depth D) Presentation Of Depth Information Simultaneously On Two Forms: - Graphic Form - Numerically 5. Doppler Speed Log Features: A) Display Of The Speed (relative To Water And Relative To Ground) B) Display Of The Distance Traveled 6.vdr Features: A) Recording Interval Of A Various Data 3.1.7 Overhead Display Overhead Display Software Displays The Following Data: 1. Engine Load 2. Engine Rpm 3. Propeller Pitch 4. Speed Of Log 5. Heading 6. Passed Distance 7. Vessel Time 8. Doppler 9. Rate Of Turn 10. Rudder Angle 11. Pitch & Roll, Depth 12. Speed & Direction Of Wind 3.1.8 Steering Magnetic Compass & Gyro Repeater Steering Magnetic Compass & Gyro Repeater Software Consisting Of: 1. Display Of Magnetic Compass 2. Display Of Gyro Repeater 3.1.9 Steering Display/autopilot Control Steering Display/autopilot Control Features: 1. Hdg – Heading Control Mode 1. Set Heading Display In Degree 2. Set Rot 2. Nav – Waypoint Steering Mode 3. N Fu/fu Control Page A) Nfu Mode: Rudder Angle Is Set Using The Control Keys B) Fu Mode: Entry Of The Target Rudder Angle Value Using The Rotary Knob 4.track Data – Logging Of The Last Past Minutes 3.1.10 Engine Control Engine Control Software Consisting Of 1. I Ndicator A) Me Indicator Load B) Me Indicator Rpm C) Pitch Indicator D) Shaft Rpm E) Speed Indicator F) Dead Man Alarm 2. M Ain Engine Control A) Nfu Control To Switch Steering Modes B) Clutch Control – Engage/de-engage C) Control Location D) Em’cy Stop E) Pitch Control – Local, Pitch Ahead/astern F) Control Mode – Constant/combinat 3. Em’cy Engine Order Telegraph 4. thruster Control Display 5. Diesel Generators Control 6. Rudder Pumps Control 3.1.11 Gmdss Software Devices Gmdss Software Consisting Of: 1. Vhf 2. Mf/hf Dsc 3. Epirb 4. Handhold Uhf 5. Handhold Vhf Gmdss 6. H Andhold Vhf Air 7. Ais Sart 8. Sart 9. Inmarsat Mini C 10. Iridium 3.1.12 Visualization Software Visualization 3-d Database With A High-resolution True-color Texturing Can Be Displayed. 1) Object Library Includes: A) 3-d Submarine And Above Water Terrain B) Aids To Navigation – Buoys, Lighthouse C) Port Facilities Models – Cranes, Tanks, Chimneys, Elevators, Containers, Vehicles, Towers, Etc. D) Moving Targets E) Unique And Standard Buildings, Monuments Models, Bridges With Night View Representation F) Piers, Jetties, And Bollard Barrels For Mooring Operation Training 2) Own Ships Software: A) Own Ships Mathematical Mode; Based On 6-dof B) Ship Models: Container Carrier, Bulk Carrier, Cruise Ship, Chemical Tanker, Vlcc, Lng Carrier, River-sea Tankers, Cargo, Anchor Tugs, Trawler, Tugboats 3) Target Ships: A) Move Automatically Along The Routes Plotted In An Exercise, Or Controlled By The Instructor B) Effected By Wind, Current And Wave Drift C) Towing And Mooring Functions 1 Set 3.2 Main Bridge Simulator Consoles And Computers 3.2.1 Main Bridge – Steel Consoles Horizon Field View Of 240 Degrees Fabrication Of Main Bridge Consoles Consisting Of: 1) Conning/maneuvering Console 2) Radar Console 3) Ecdis Console 4) Bearing Console 5) Navigation Aid Equipment Console 6) Gmdss Console 7) Steering Stand/console 8) Chart Table (standard Size) 9) Overhead Panel 10) Gyro Repeater With Pelorus Stand 11) Binoculars 12) The Console Must Made Of Steel 7 Sets 3.2.2 ◻70” Visual Screens Led Backlit • ◻7x Pc Visual Channel • I◻ntel Core I5 Processor • ◻16 Gb Ram ◻ • ◻256 M.2 Ssd◻ • ◻7x Rtx 4070 Or Higher • ◻1x Keyboard/mouse • ◻7x 70” Tv Led Backlit 4k Display • I◻nstrument Consoles • ◻7x Hdmi Cable • ◻7x 1.5k Ups 1 Sets 3.2.3 Conning Console • ◻1 X Pc • ◻intel Core I5 Processor • ◻8 Gb Ram • ◻256 M.2 Ssd • ◻2x Monitor 24” • ◻1x Keyboard/mouse • ◻1x Ups 1kva • ◻console Made Of Steel (tct 0.8 Mm To 2 Mm) Instrument Adds On Conning Console. 1 Sets 3.2.4 Ecdis Console • ◻1 X Pc • ◻intel Core I5 Processor • ◻8 Gb Ram • ◻256 M.2 Ssd • ◻2x Monitor 24” • ◻1x Keyboard/mouse • ◻1x Ups 1kva • ◻console Made Of Steel (tct 0.8 Mm To 2 Mm) • Instrument Adds On Conning Console. 1 Set 3.2.5 Radar / Arpa Console • ◻1 X Pc • ◻intel Core I5 Processor • ◻8 Gb Ram • ◻256 M.2 Ssd • ◻1x Monitor 24” • ◻1x Keyboard/mouse • ◻1x Ups 1kva • ◻console Made Of Steel (tct 0.8 Mm To 2 Mm) 1 Set 3.2.6 Chart Table Console With Monitor With Goose Neck Dimmable Light • ◻1x Chart Table Console 1300mm X 1312mm • ◻1 X Pc • ◻intel Core I5 Processor • ◻8 Gb Ram • ◻256 M.2 Ssd • ◻2x Monitor 24” • ◻1x Keyboard/mouse • ◻1x Ups 1kva • ◻1x Parallel Ruler • ◻1x One-hand Compass Divider • ◻2x Plotting Triangle With Handle • ◻1x Deck Log Book • ◻admiralty Paper Charts Related To Installed Maps In Simulator 1 Set 3.2.7 Binocular And Instrument Pc • ◻1x Pc • ◻intel Core I5 Processor • ◻8 Gb Ram • ◻256 M.2. Ssd • ◻rtx 4070 Or Higher • ◻keyboard/mouse • ◻2x 24" Monitor • ◻1x Ups 1.5kva • ◻console Made Of Steel (tct 0.8 Mm To 2 Mm) 1 Set 3.2.8 Radar/arpa Keyboard Radar/arpa Keyboard (1 Set) Specifications: 1) Usb Interface 2) Console Mount Type 1 Set 3.2.9 Handset Handset Includes: 3) Handset 4) Cradle With A Ptt Switch 5) Usb Interface Board 6) Handset Box 1 Set 3.2.10 Speaker With Subwoofer Channel Sound System Specification: 6. Interface With Visual Pc 7. Realization Of 3d Sound Effect System 8. Atleast 450watts Speaker With Subwoofer 9. Port: Mini Jack 10. Power: Usb 1 Set 3.2.11 Gyro Repeater With Pelorus Stand Gyro Repeater Includes: 11) Bearing Repeater Compass 12) Pelorus Stand 13) Power: 24vd 14) Signal: Rs422 Nmea 1 Set 3.2.12 Whether Instruments Whether Instruments Includes: 1) 1x Ships Clock 2) 1x Aneroid Barometer 2) 1x Hygrometer 6 Set 4.0 Mini Bridges Simulator 4.1 Mini Bridge Simulator Software 4.1.1 Conning Display Conning Display Software Consisting Of: 1) Main Features Rudder Operation Mode Setup 1. Rudder Presetting 2. Bow & Stern Thruster Presetting 3. Autopilot Control 4. Signal Response Limit Presetting 5. Me Control 6. Binocular Initiation 7. Observer’s Vision Angle Presetting 8. Observer’s Position Presetting 9. Sound Signals, Lights & Figures Control 10. Anchor Gear, Mooring & Fenders Control 11. Tugs Control 2) Information Display 1. Propeller Shaft(s) Revolutions Values 2. Turning Angle Of Cpp Value 3. Rudder Responding Value 4. Angle Of Rate Value 5. Gyro & Magnetic Compass Course 6. Log Speed & Speed Over Ground 7. Load Of Bow And Speed Of Stern 8. Velocity & Direction Of (true/relative) 9. Velocity & Direction Of Stream (current) 10. Ship Date & Time 11.t Raversed Distance 12. Depth Under Keel 13. Distance From Shore 14. Me Loads 15. Ship Heel And Trim 16. Fire Detection Control System, System Failures Alarms List 17. Vhf Point With A Channel Selector 18. Pilot Card, Maneuvering 19. Assessment & Vdr 20. Arpa Keyboard Control 4.1.2 Radar/arpa Display Radar/arpa Software Consisting Of: 1)i Mitating Display Of Radar/arpa A) Range Scale B) Display Modes: Head Up, North Up, Tm, Rm C) Display Effects: Target Trials, Echo, Zoom D) Display Of Charts Of The Region 2) Arpa A) Acquisition Modes B) Target Canceling Modes C) Tracking Data Output Time D) Target Information E) Visual & Acoustic Alarms F) Cpa, Tcpa Limits Setting G) Trial Maneuver 3) Radar Parameter A) Operating Frequency (s-band, X-band) B) Antenna Rpm (20, 60 Rpm) C) Direction Pattern Width (vertical, Horizontal) D) Antenna Height & Tilt Angle E) Blind Sectors 4.1.3 Ecdis Display Dnv Type Approved Ecdis Software License Consisting Of: 1) Multi Chart Loading 2) Chart Info 3) Chart Orientation (north Up, Head Up, Course Up) 4) Alarms (ais, Anti-grounding, Sensors, Route, Radar/target, Chart Areas…) 5) Ship Motion Data (cog, Sog, Hdg, Log) 6) Erbl For Measuring Bearings And Ranges 7) Two Modes Of Displaying (true, Relative) 8) Mob Mode 9) Routing Planning, Checking And Monitoring 10) Work With Multiple Routes 11) I Nterface With Position Sensor, Gyro, Log, Echo- Sounder, Arpa 12) Radar Overlay 4.1.4electronic Navigation Chart 1. Dnv Type Approved 2. Senc Format, Cm-93/3 3. Perpetual License 4.1.5 Overhead Display Overhead Display Software Displays The Following Data: • ◻speed Of Log • ◻vessel Time • ◻rate Of Turn • ◻rudder Angle • ◻speed & Direction Of Wind 4.1.6 Steering Display/autopilot Control Steering Display/autopilot Control Features: • ◻hdg – Heading Control Mode ◦ ◻set Heading Display In Degree ◦ ◻set Rot • ◻nav – Waypoint Steering Mode • ◻nfu/fu Control Page ◦ ◻nfu Mode: Rudder Angle Is Set Using The Control Keys ◦ ◻fu Mode: Entry Of The Target Rudder Angle Value Using The Rotary Knob • ◻track Data – Logging Of The Past Minutes 4.1.7 Engine Control Engine Control Software Consisting Of: A.i Ndicator 1. Me Indicator Load 2. Me Indicator Rpm 3. Pitch Indicator 4. Shaft Rpm 5. Dead Man Alarm B. Main Engine Control 1. Nfu Control To Switch Steering Modes 2. Clutch Control – Engage/de-engage 3. Control Location 4. Em’cy Stop 5. Pitch Control – Local, Pitch Ahead/astern 6. Control Mode – Constant/combinat C. Em’cy Engine Order Telegraph D. Thruster Control Display E.d Iesel Generators Control F.r Udder Pumps Control 4.1.8 Steering Magnetic Compass & Gyro Repeater Steering Magnetic Compass & Gyro Repeater Software Consisting Of: 1) Display Of Magnetic Compass 2) Display Of Gyro Repeater Stations 4.2 Mini Bridge Simulator Hardware 6 Set 4.2.1 Mini Bridge – Consoles Made In Formica Laminated Board Fabrication Of Main Bridge Consoles Consisting Of: 1) Conning Console 2) Radar Console 3) Ecdis Console 4) Maneuvering Console 5) Chart Table With Gooseneck Dimming Light 6 Unit 4.2.2 Mini Bridge Desktop Station 70” 4k Display For Visual Pc Wall Mounted • ◻70” Tv Led Backlit 4k Display -1 X Bridge Image Generator Computer (for Visual, Conning, Radar, Maneuvering) • ◻1x Pc • I◻ntel Core I5 Processor • ◻16 Gb Ram ◻ • ◻256 M.2 Ssd◻ • ◻rtx 4070 Or Higher◻ • ◻1 X Keyboard/mouse • ◻2 X 24” Monitor • ◻1x Ups 1.5kva • ◻1 X Ecdis Computer • ◻1 X Pc • ◻intel Core I5 Processor • ◻8 Gb Ram ◻ • ◻256 M.2 Ssd◻ • ◻1x Keyboard/mouse • ◻1x 24” Monitor • ◻1x Ups 1.5kva • ◻1 X Speakers • ◻1 X Goose Neck Microphone • ◻1 X Set Desktop Instrument Console Including: • ◻steering System / Autopilot / Nfu • ◻steering Wheel Stand • ◻dual Telegraph • ◻1 X Console Tables • ◻1 X Handheld Uhf Equipment • ◻1 X Console Made In Formica Laminated Board (tct 3/4 Inches) 6 Unit 4.2.3 Speaker With Subwoofer Channel Sound System Specification 1. Interface With Visual Pc 2. Realization Of 3d Sound Effect System 3. Atleast 150 Watts Speaker With Subwoofer 4. Port: Mini Jack 5. Power: Usb 6 Sets 4.2.4 Chart Table And Plotting Aids • ◻1x Plotting Charts • ◻1x Parallel Ruler Plastic • ◻1x One-hand Compass Divider Steel • ◻2x Plotting Triangle With Handle Plastic • ◻1x Chart Table 1300mm X 1312mm • ◻1x Deck Log Book 4 Sets 4.3 Virtual Bridge Familiarization W/ Virtual Reality Device The Supplier Shall Provide A Virtual Bridge With The Use Of Virtual Reality Providing The Following Visualizations: • B Ridge Wing Equipment -speaker Mic -rate Of Turn -engine Rpm -quick Release Lifebouy -remote Panel -gyro Compass Repeater -fire Box -hatch For Maintenance -thermometer • Main Bridge -epirb -sart -clear View Screen -location Of Fire Extinguishers -pantry With Equipment -pilot Chair -smoke Detectors -damage Control Plans -radar 1 And 2 And 3 -gps With Other Equipment -helm Wheel -indicator Control -deck Light Control -admiralty And Other Maritime Publications -fireplan -rudder Angle Indicator -voice Recorder -whistle Horn -water Tight Door Indicators -window Wipers -pa Systems -cargo Hold Fan Control -smoke Alarm System -fire Alarm System -general Alarm System -vhf System -log Books And Other Documentation -ecdis Voyage Planner -pressure Recorder -portable Uhfs -lifejackets, Rocket Flare, And Rocket Line -location Of Immersion Suits -barometer -utc Clock -radio Room Configuration -posters -charts -compass Deck / Monkey Island Or Adar Equipment -antennas -anemometer -and Other Equipment On The Monkey Bridge The Virtual Reality Bridge Must Be Complete With Hotspots, Identification Tags And Descriptions. It Shall Also Be Available On An Offline System, Navigable. 1. Hardware For Virtual Bridge Familiarization - Display: • ◻type: Lcd • ◻resolution: 2064 X 2208 Per Eye • ◻refresh Rate: 120 Hz - Field Of View: • ◻horizontal: 97 Degrees • ◻vertical: 93 Degrees - Processor: • ◻chipset: Qualcomm Snapdragon Xr2 Gen 2 • ◻ram: 12gb - Storage: • ◻options: 128gb, 256gb, And 512gb Variants - Audio: • Integrated: 3d Spatial Audio With Improved Speakers • ◻microphone: Built-in With Improved Noise Cancellation - Tracking: • Inside-out: 6dof (six Degrees Of Freedom) With Four Wide- Angle Cameras For Room-scale Tracking • ◻hand Tracking: Improved Hand Tracking Capability - Controllers: • ◻type: Meta Touch Pro Controllers •features: Haptic Feedback, Improved Ergonomics, Rechargeable Batteries - Battery: •headset: Approximately 2-3 Hours Of Active Use •charging: Usb-c Fast Charging - Connectivity: •wireless: Wi-fi 6e Support •bluetooth: 5.2 - Software: •operating System: Meta's Custom Os Based On Android •compatibility: Supports All Vr Apps. •exclusive Features: Mixed Reality Capabilities With Color Passthrough - Additional Features: •passthrough: Full-color Passthrough For Mixed Reality Experiences •eye Tracking: No Built-in Eye Tracking •face Tracking: No Built-in Face Tracking -what’s Included In The Box: •headset •touch Pro Controllers (pair) •charging Cable (usb-c) •power Adapter W/ Extra 1 Battery Each •controller Lanyards •glasses Spacer -add On’s: •2x Strap With Battery •8x Silicone Cover Face Cover •4x Silicone Protective Case •8x Silicone Case For Controller 2. 3 Row Vr Storage Cabinet With Lock 4.4 Debriefing Room 1 Pc 4.4.1 Tv Monitor 1) Size: At Least 70" 2) Smart Tv 3) Led (atleast 4k) 4) Wall Mounted. 5) Hdmi 10meters 1 Pc 4.4.2 Computer 1) 1 X Pc 2) I Ntel Core I5 Processor 3) 8 Gb Ram 4) 256 M.2 Ssd 5) Low Profile Video Card 6) 1x Keyboard/mouse 7) 1x Ups 1kva 8) 1x W/ Computer Table Table Size: L 2300 X W 700 X H 750 Mm 9) 1x Ergodynamic Chair Briefing And Debriefing Rooms With Playback Capability (playing Of Recorded Exercise And Assessment In Simulator Other Requirements 1. Implementation A) A 3-year Warranty For The Computer Hardware And Console Peripherals B) The Software Comes With A 3-year Warranty Inclusive Of New Updates. C) The Project Will Be Implemented Within 150 Cd. Liquidating Damages Will Be Applicable For Any Delays. D) A Comprehensive Guide Will Be Provided, Offering Detailed Instructions On System Operation And Maintenance Activities, Facilitating Ease Of Use And System Upkeep. E) Onsite Training Sessions Will Be Conducted By Certified Instructors And Technical Experts, Facilitating Smooth Knowledge Transfer And Ensuring Proficient System Operation. Certificates Will Be Provided Upon Completion Of Training Sessions. F) Structured Cabling Standards To Establish A Reliable And Efficient Network Infrastructure. 1. The Simulator Manufacturer Should Be An Iso 9001:2015 And Iso 14001:2015 Certified Business. The Simulator Should Be Class Certified (dnv Class A St-0033 Maritime Simulator Systems Standard) Or Equivalent, And May Also Be Certified By National Authorities. 2. The Software Must Be Perpetual License. 3. The Supplier Shall Conduct An Annual Face-to-face Maintenance Session To Ensure The System's Optimal Functionality And Performance. 4. The Supplier Must Resolve Any Software Or Hardware Issues Within 2 To 5 Business Cd Of Their Occurrence To Minimize Downtime And Disruptions. 5. All Hardware Installations Must Adhere To Software Specifications To Guarantee Seamless Integration And Operation. 6. The Computer Hardware Supplied Must Be Sourced From Proven Technology Hardware Companies, Quality And Performance Standards To Ensure Optimal Functionality And Compatibility With The Software. 7. Bidders Are Required To Offer Continuous Retraining Sessions Free Of Charge During The Warranty Period To Ensure Users' Proficiency With The System. 8. Bidders Must Submit A 100% Credit Line Certificate Equivalent To The Approved Budget Ceiling To Demonstrate Financial Capability And Commitment. 9. Bidders Should Provide Manufacturer Authorization Or Exclusivity Certificate To Ensure The Authenticity And Legality Of The Supplied Products. 10. The Bidder Is Responsible For Performing A Thorough Site Inspection, And A Site Inspection Certificate Issued By The Agency Shall Be Submitted As Part Of The Eligibility Requirements. 11. The Bridge Simulator Is Ready For Seamless Integration With The Future Engine Simulator And Cargo Simulator, Ensuring Compatibility And Functionality. 12. The Seven (6) Stations Can Connect And Enable Them To Interact With Each Other In A Coordinated Scenario. 13. Instructor Station 2 Will Be Used In The Simulator Scenario Development Station As An Instructor Station Capable Of Deploying Scenarios To Other Stations. 14. All Other Simulator Specifications And Capabilities Not Indicated Herein, The Simulator Shall Comply With The Simulator Performance Standards As Required In Maritime Industry Authority (marina) Evaluation Instrument For Full Mission Bridge Simulator. 15. The Bidders Should Provide A Breakdown Of The Unit Prices Of The Major Components In The Original Of Duly Signed And Accomplished Price Schedule(s) Under Financial Component Envelope Upon Bid Submission. Furthermore, They Should Provide A More Detailed Breakdown As A Condition For Issuance Of Notice To Proceed. Part Ii. Other General Requirements 1 Ea. Project Billboard/signboard 1 L.s Occupational Safety And Health Program 1 L.s Mobilization/demobilization Part Iii. Civil, Mechanical, Electrical, & Sanitary/plumbing Works Part A. Earthworks 1 L.s Removal Of Structures And Obstruction Part C. Finishings And Other Civil Works 68.4 M² Wall, Wood Frame, Fiber Cement Board 6mm 30.96 M² Tempered Glass Door, 12mm, Reflective 24.84 M² Aluminum Glass Window 4.2 M² Doors (flush) 32.87 M² Acoustical Ceiling Panel 745.2 M² Painting Works, Masonry/concrete 8.4 M² Painting Works, Wood 4 M² 150mm Chb Nonload Bearing(including Reinforcing Steel) 61.3 M² Plain Cement Plaster Finish 33.75 M² Carpet Floor Tiles Part D. Electrical 1 L.s Panelboard With Main And Branch Breakers 1 L.s Wires And Wiring Devices 1 L.s Network Cabling 1 L.s Door Access And Card Reader System Part E. Mechanical 1 L.s Airconditioning, Package/split Type
Closing Date27 Aug 2024
Tender AmountPHP 40 Million (USD 707.6 K)
Assam Electricity Grid Corporation Limited - AEGCL Tender
Security and Emergency Services
India
Tender Id: AEGCL/MD/CGM/CAR/DRONE/2023/29 | Transmission Line Visual And Thermal Inspection, Asset Digitization, Asset Health Monitoring, Defect Analysis And Encroachment Analysis Using Aerial/ Airborne Technology With Ai Powered Cloud Based Platform.
Closing Date19 Feb 2024
Tender AmountRefer Documents
Assam Electricity Grid Corporation Limited - AEGCL Tender
Corrigendum : Closing Date Modified
India
Tender Id: AEGCL/MD/CGM/CAR/DRONE/2023/09 | Transmission Line Visual And Thermal Inspection, Asset Digitization, Asset Health Monitoring, Defect Analysis And Encroachment Analysis Using Aerial/ Airborne Technology With Ai Powered Cloud Based Platform.
Closing Date30 Jan 2024
Tender AmountRefer Documents
4501-4510 of 4511 archived Tenders