Development Academy Of The Philippines Tender

Description Project Title: One (1) Lot Supply, Installation And Commissioning Of Window Blinds At Dapcc Cottages 5 And 6 A. General Scope Of Work: A.1. Mobilization Of All The Needed Tools, Equipment, Supplies, Machineries And Materials On-site Including All Applicable Personal Protective Equipment (ppe) Necessary For The Completion Of The Project; A.2. Installation Of Window Blinds In 2 Cottages. A.3. Included Equipment Are: 3.1 Tape Measure 3.2 Pencil 3.3 Electric Drill 3.4 Drill Bits 3.5 Screw 3.6 Ladder 3.7 Brackets 3.8 Window Blinds A.4. Provide Manpower During Project Implementation Until Completion; A.5. Ensure The Safety And Security Of All Dap Personnel And Properties During The Implementation Of The Activities; A.6. Replace/repair/repaint/retouch/restore Dap Property That May Be Damaged As A Result Of The Works During The Project Implementation At The Expense Of The Contractor; A.7. Ensure Visibility And Presence Of Safety Signages/barricades/barriers In All Areas Affected; A.8. Clearing, Hauling And Disposal Of Debris (if Applicable) That Were The Result Of The Implementation Of The Project. Proper Disposal Of The Debris Out Of The Dapcc Premises, Shall Be The Sole Responsibility Of The Contractor; B. Specific Scope Of Work/coverage: B.1.1. Cleaning And Preparing The Window Area; B.1.2. Measure Of Window Frame; B.1.3. Mark The Bracket Position; B.1.4. Properly Installing The Brackets; B.1.5. Setting Up The Headrail; B.1.6. Carefully Hanging The Blinds; B.1.7. Design And Location Details: • Location: Cottages 5 And 6 Design: Combi Blinds (naural) Color: Coffee Room Qty: 2 Qty Per Room: 8 Total Qty Of Blinds: 16 Sqft Per Room: 220 Total Sqft.: 440 Location: 5 And 6 (sliding Door) • Design: Vertical Blinds (split Type) Color: Gray Room Qty.: 2 Qty. Per Room: 1 Total Qty, Of Blinds: 2 Sqft Per Room: 95 Total Sqft: 190 C. Other Requirements: C.1. Implementation Of The Project Shall Be Subject To The Availability And Clearance Of The Dapcc Management; C.2. Dapcc Work Permit Shall Be Secured At Least One (1) Day Prior To Project Implementation; C.3. Provision Of First Aid Tools, Supplies, And Materials Must Be Present At All Times And Should Be Provided By The Contractor; C.4. The Contractor Shall Issue A Certificate Of Warranty Reflecting The Validity Of At Least One (1) Year From The Date That Is Was Accepted By The Dapcc; C.5. The Dapcc Shall Issue A Certificate Of Project Completion Once All Requirements And Activities Have Been Fully Met As Attachment For The Processing Of Payment; C.6. Project Duration/committed Completion Date Should Not Be Later Than Thirty (30) Calendar Days From The Date Of Receipt Of Notice To Proceed Or Purchase Order And Must Be Clearly Stated In The Final Quotation;