Department Of Agriculture Tender

Description Supply And Delivery Of 4 Units Four-wheel Drive Tractor Abc: P19,600,000.00 A. Prime Mover - Rated Power: 67.14 Kw Hp, Minimum - No Of Cylinder: 4 Cylinder - Stroke And Cycle: 4 Stroke Cycle - Cooling System: Water-cooled - Fuel Injection System: Direct Injection - Fuel Ignition/fuel: Diesel B. Performance/classification - Hitch Category: Category 2&3 - Hydraulic Lift: 15 Kn, Minimum - Pto Power: 85% Of The Engine's Maximum Power, Minimum - Specific Fuel Consumption @ Max. Pto Power: 280g/kw-hr, Maximum - Aspiration Method: Turbocharged - Steering System: Hydraulic Power/full Hydrostatic - Steering System: Hydraulic Power/full Hydrostatic - Transmission System: 8f/2r, With Differential Lock - Brake System: Hydraulic/mechanical - No. Of Drive: 4 Wheel Drive - Noise Level: 90db (a), Maximum C. Accessories - With Roll Over Protective Structure (rops), Seatbelt, Canopy, Three-point Linkage: Category 1, Pto Casing/cover - With Set Of Heavy Duty Tools: A. One (1) Set Of Open Wrench (size:6-32mm, Minimum) B. (for Items B, Which Ever Is Compatible To The Offered Units) One (1) Set Allen Type Wrench (for Star And Hexagon) / One (1) Piece Each Or Combination Of Philips And Flat Screw Driver C. One (1) Pair Of Mechanical Pliers D. One (1) Piece Adjustable Wrench (size:12, Minimum) E. One (1) Piece Grease Gun (100cc, Minimum) F. One (1) Piece Tire Wrench (compatible To The Offered Units, At Least 2 Different Sizes) G. One (1) Piece Hydraulic Jack - With Heavy-duty Toolbox That Can Accommodate All Of The Abovementioned Items Except Hydraulic Jack And Tire Wrench. - With Original Equipment Manufacturer (oem) Manual - With Slow Moving Emblem At The Back Of The Tractor - With Early Warning Device - Hydraulic Control Valve: Auxillary Or Integral D. Implement Disc Plow: - Width Of Cut:1,100mm, Minimum - No. Of Disc/blade: 4 - Average Depth Of Tillage: 190 Mm, Minimum - Actual Field Capacity: 0.4 Ha/hr, Minimum - Diameter: 26 Inches - Field Efficiency: 85%, Minimum - Fuel Consumption: 11l/hr, Maximum Harrow: - Average Width Of Tillage: 1700 Mm ,minimum - No. Of Disc/blade: 20, Minimum - Actual Field Capacity: 1 Ha/hr, Minimum - Diameter Of Blade: 24 Inches, Minimum - Field Efficiency: 90%, Minimum Trailer: - Capacity: 5 Tons, Minimum - Tire: 7.5x16, 8pr, Pneumatic, Must Be Manufactured Not Earlier Than Year 2024 - Dimension: 10 Ft X 6ft X 2ft (lxwxh) - Rim: Ring-lock Type - Tow Bar Is Parallel To The Ground When Attach To Tractor Hitch With Tailgate - With Leaf Spring Suspension Corn Seeder With Fertilizer Applicator - Effective Field Capacity: 0.75ha/hr, Minimum - Seeding Rate: 20 Kg/ha, Minimum - Mechanism: Pneumatic - No. Of Rows : 4 Rows, Minimum - With Adjustable Hill/row Spacing And Depth Hill Spacing At Least 15-30 Cm Row Spacing :70+- 10 Cm - Missing Hills: 8%, Maximum - With Replaceable Seed Plates: 2 Sets, Minimum E. Warranty: 1 Year Warranty On Parts And Services And Two (2) Years On The Engine F. Other Requirements: - With Da Logo (all Weather Type Sticker (vinyl Sticker), 10 Inches In Diameter) - With Amtec Test Result For Tractor Alone - With Amtec Test Result For Disc Plow Coupled With Tractor - With Amtec Test Result For Disc Harrow Coupled With Tractor - With Amtec Test Result For Corn Seeder With Fertilizer Apllicator Coupled With Tractor - With Certificate Of Conformity For Tractor - With Namdac Certificate - With Pto Certificate By Bafe - Materials And Other Components Shall Be All Brand New - Shall Provide Diesel Fuel (at Least Half Of Tank Capacity) And Engine Oil In Every Units - Specification Should Be Signed And Sealed By An Abe With Valid Prc Id And Ptr - Bidder Should Have Service Center (owned And Managed) Within Region12 - The Technicians Of The Mfaddies And Or Its Accredited Service Center Must Have A Tesda National Certificate Ii(ncii) Relevant To The Job Or An In House Training. - No Reported Major Breakdown For Products Under Warranty In The Last 72 Hours Upon Receipt Of Complaint/s - Control Instructions And Label Of The Machine & Engine Should Be In English - Must Conduct Training In Operations And Maintenance On Recipient/s D. Warranty - One (1) Year For Machine And Two (2) Years For The Engine Delivery Period: 45 Calendar Days Delivery Sites: Da Tupi Res, Tupi, South Cotabato Note: All Units Shall Be Inspected @ Da-tupi Res, Including The Conduct Of Acceptance Testing & Operations And Maintenance Training To The Recipient. Units Must Be Delivered To The Recipients (see Annex A) After The Conduct Of Operation And Maintenance Training. Cost Of Bidding Documents: P25,000.00 1. During Buying Of Bidding Document: Must Submit Letter Of Intent (loi) And Present The Following Eligibility Document: A. Certificate Of Registration From Philgeps (platinum Membership) B. Registration Certificate From Sec/dti/cda C. Mayor/business Permit D. Tax Clearance 2. In Case Of Representative: Must Submit A Copy Of Board Resolution Or Secretary’s Certificate/special Power Of Attorney Whichever Is Applicable Coupled With Specimen Signature.