Crane Tenders

Crane Tenders

Philippine Ports Authority Tender

Machinery and Tools
Philippines
Details: Description Request For Quotation 1. The Philippine Ports Authority, Pmo Northern Luzon, Through Its Bids And Awards Committee (bac), Hereby Invites Contractors Duly Registered With The Philippine Contractors Accreditation Board (pcab) To Submit Quotation/bid Proposal For The Hereunder Project In Accordance With Sec. 53.9 (small Value Procurement) Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184: A. Project Title : Relocation Of Rubber Dock Fender B. Location : Port Of Currimao, Ilocos Norte C. Approved Budget For The Contract (abc) : Php 143,058.23 D. Equipment Requirement: 1 – Cranes, Truck Mounted, Hydraulic Telescopic Boom, 100hp, Owned Or Leased 1 – Welding Machine, 400 Amp. Min., Owned E. Contract Duration: 15 Calendar Days 2. Prospective Bidders Shall Submit Their Quotations In Three (3) Copies Together With The Following Documents: A. Copy Of Valid Pcab License – “general Engineering D” B. Copy Of Valid And Current Mayor’s Permit. C. Copy Of Valid Phil-geps Registration/organizational Number D. Notarized Omnibus Sworn Statement 3. If Interested, Please Pay A Non-refundable Amount Of Five Hundred Pesos (php 500.00) Vat Inclusive, Before The Deadline Set For The Submission Of Bids. 4. Quotation/bid Proposal Accompanied With Detailed Cost Estimates Must Be Delivered To The Bids And Awards Committee (bac), C/o Bac Secretariat, Ppa, Pmo Northern Luzon, Brgy. Maglaoi Norte, Currimao, Ilocos Norte Or Thru E-mail Address Bac.ppanlz@gmail.com On Or Before 5:00pm, January 06, 2025. 5. Opening Of Price Quotations Will Be Conducted On January 07, 2025, 10:00 Am. (sgd) Fernando Z. Nipal Bac Chairperson
Closing Date6 Jan 2025
Tender AmountPHP 143 K (USD 2.4 K)

DEPT OF THE ARMY USA Tender

Civil And Construction...+1Civil Works Others
United States
Details: The California National Guard Intends To Issue An Invitation For Bids (ifb) To Award A Single Firm-fixed-price (ffp) Contract For Services, Non-personal, To Construct A 24,564 Sqft National Guard Vehicle Maintenance Shop At Bakersfield, Kern County, California. This Facility Is Designed To Maintain Surface Equipment To The Highest Possible Operational State Of Readiness In Support Of Training, Natural Disaster Relief, And/or Combat Operations. The Contractor Shall Provide All Plant, Labor, New And Current Material, Transportation, Tools, Equipment, Appliances, Supplies, Services, Permits, Insurance, And Supervision Necessary For Construction. The Vehicle Maintenance Shop Shall Be Of Permanent Construction In Accordance With The Project’s Plans And Specifications. The Intended Site Is Property In Possession Of The California Army National Guard And Is Adjacent To An Existing Bakersfield Army National Guard Readiness Center. Integral Characteristics/items Of The Vehicle Maintenance Shop Include Backup/emergency Generator, Paved Organizational Vehicle Parking, Controlled Waste Facility, Flammable Materials Facility, And Electric/photovoltaic Power. This Project Will Include Comprehensive Interior Design. This Facility Will Be Designed To Meet Industry Standards As Well As All Local, State, And Federal Building Codes And As Per Public Law 90-480. Construction Will Include All Utility Services, Information Systems, Fire Detection And Alarm Systems, Cranes, Roads, Walks, Curbs, Gutters, Storm Drainage, Parking Areas For Approximately 20 Privately Owned Vehicles, And Site Improvements. Facilities Will Be Designed To A Minimum Life Of 50 Years In Accordance With Dod's Unified Facilities Code (ufc 1-200-02) Including Energy Efficiencies, Building Envelope And Integrated Building Systems Performance As Per Asa(ie&e) Sustainable Design And Development Policy Update Dec 2013. the Following Items May Be Included With The Solicitation As Additive Bid Items (abis) Or Options: provide Two-bay Fluid Distribution System. provide Three-bay Fluid Distribution System. provide 15-ton Crane Coverage. provide Vehicle Wash Rack. provide Dual-level Loading Dock. landscaping, Site & Rigid Pavement Enhancements. add Third Vehicle Maintenance Bay. there Are No Brand Name, Brand Name Or Equivalent, Or Sole Source Requirements. the Government Has Not Determined If This Project Will Be Set Aside For Small Businesses And Responses To This Posting Will Help The California National Guard To Determine If A Small Business Set Aside Is Warranted. In The Event Adequate Small Business Contractors Are Not Available For Adequate Competition For This Project, It May Be Advertised As Unrestricted. Firms Of All Sizes Are Therefore Encouraged To Provide A Response To This Notice. The North American Industry Classification System (naics) Code Is 236220, With A Small Business Size Standard Of $45,000,000. The Magnitude Of Construction Is Between $10,000,000 And $25,000,000. the Tentative Date For Issuing The Solicitation Is On-or-about Monday, 27 January 2025 With A Tentative Date For A Pre-bidconference And Site Visit On-or-about Wednesday, 12 February 2025. Interested Contractors Are Encouraged To Attend And Shall Follow Conference Registration And Base Access Requirements Shown In The Solicitation. the Bid Opening Date Is Tentatively Planned For On-or-about Wednesday, 2 April 2025. actual Dates, Times, And Locations For These Activities Will Be Identified In The Formal Solicitation. all Interested Concerns Should Provide A Written Response, Not To Exceed Five (5) Pages That Includes: a Positive Statement Of Their Intent To Submit A Proposal As A Prime Contractor. a Completed Source Sought Information Request Form (attached To This Posting; This Document Does Not Count Against The Page Limitation). a Listing Of Projects Completed During The Past Three Years, Both For Government And Private Industry. Please Include The Type Of Project, Dollar Value, Contract Number, Location, And Point Of Contact For The Owner/contracting Agency. Please Also Indicate If The Firm Was Prime Or Subcontractor. If A Subcontractor, Provide The Name And Point Of Contact For The Prime Contractor. a Brief Outline Of Resources, Subcontractors, And Key Personnel That Would Be Used To Accomplish The Contract. the Solicitation And Any Technical And/or Engineering Data For This Solicitation Will Be Distributed Using The Contract Opportunities Module Of The Sam Website. Interested Offerors Must Be Registered In The System For Award Management (sam) Website (www.sam.gov). Once Posted, The Solicitation's Technical/engineering Data May Locked/secured And Would Require Bidders To Request Explicit Access To The Solicitation From The Contracting Office.complete Instructions (to Include Training) Are Available Through The Sam Website. The California National Guard Is Unable To Provide Technical Assistance With The Site. Interested Firms/individuals Are Advised To Begin Gaining Access To Sam As Quickly As Possible. Bidders Will Be Able To Also Request Data Via Export-controlled Access Through The Defense Logistics Agency. your Attention Is Directed To Far Clause 52.219-14(e)(3) (deviation 2021-o0008), Limitations On Subcontracting, Which States “by Submission Of An Offer And Execution Of A Contract, The Offeror/contractor Agrees In Performance Of The Contract For General Construction, It Will Not Pay More Than 85 Percent Of The Amount Paid By The Government For Contract Performance, Excluding The Cost Of Materials, To Subcontractors That Are Not Similarly Situated Entities. Any Work That A Similarly Situated Entity Further Subcontracts Will Count Towards The Prime Contractor’s 85 Percent Subcontract Amount That Cannot Be Exceeded”. in Accordance With Far 36.211(b), The Following Information Is Provided: the National Guard Has No Agency-specific Policies Or Procedures Applicable To Definitization Of Equitable Adjustments For Change Orders Under Construction Contracts Other Than Those Described At Far 43.204, Dfars 243.204 And Afars 5143.204. data For The Prior 3 Fiscal Years Regarding The Time Required To Definitize Equitable Adjustments For Change Orders Under Construction Contracts For The National Guard Is Currently Not Available But Will Be Compiled And Provided In Future Announcements. disclaimer: The Official Plans And Specifications Will Only Be Available Through The Contract Opportunities Module. The Government Is Not Liable For Information Furnished By Any Other Source. Amendments, If/when Issued Will Only Be Posted To Contract Opportunities. It Is The Bidder’s Responsibility To Check The Website Periodically For Any Amendments To The Solicitation. The Government Is Not Responsible For Any Loss Of Internet Connectivity Or For An Offeror’s Inability To Access The Documents Posted On The Referenced Web Pages. The Government Will Not Issue Paper Or Emailed Copies.
Closing Date4 Jan 2025
Tender AmountRefer Documents 

DEPT OF THE ARMY USA Tender

Civil And Construction...+1Construction Material
Corrigendum : Closing Date Modified
United States
Description: Sources Sought automated Mat Casting At Richardson Landing, Tn introduction: This Is A Sources Sought Announcement; A Market Survey For Information Only, To Be Used For Planning Purposes. This Is Not A Solicitation For Proposals And No Contract Will Be Awarded From This Announcement. the Government Is Seeking Qualified, Experienced Sources Capable Of Executing A Design Build Contract To Develop An Automated Casting Plant At Richardson Landing To Mass Produce Articulated Concrete Mattress (acm) Squares To Government Specifications Within Specific Tolerances. Squares Cast Will Be Stored On The Current Casting Field And Have Must Have A Compressive Design Strength Of 3,000 Psi At 28 Days. background: Annually, The United States Army Corps Of Engineers (usace) Mississippi Valley Division Casts Approximately 150,000 Squares Of Acm At 3 Government Furnished Locations (see Figure 1). The Acm Is Used As Revetment To Maintain Channel Stability For The Lower Mississippi River. Casting Acm Has Historically Been Provided Via Manual Labor And Cast Outdoors As Weather Permits. articulated Concrete Mattress – Current Process: an Articulated Concrete Mattress Square Consists Of 16 Individual Concrete Blocks (4 Feet X 18 Inches X 3 Inches Thick). They Are Currently Cast In Government Furnished Forms Upon A Proprietary Wire Mesh To Form An Articulated Concrete Mattress Square (4 Feet X 25 Feet X 3 Inches) That Is Used As An Assembly System For Interconnecting The 16 Concrete Blocks. A Mix Design Is Used To Acquire 3,000 Psi On A 28-day Cylinder Break. squares Of Mattress Are Cast In Stacks Of 13 That Are Neatly Aligned Vertically And By Rows (see Figure 2). One Layer Of Specified Paper Is Placed As A Separation Beneath The Bottom Square Of Each Stack And Between Each Successive Layer Of Mattress. The Current Process Requires The Wire Mesh To Be Placed On The Paper With The Cross Wires (bracket Wires) On Top Of The Longitudinal Wires. The Forms Are Then Placed Over The Wire Mesh, The Wire Mesh Drawn Up Into The Notches In The Sides And Cross Pieces Of The Forms, And Cross Rods Driven. The Central Location Of The Wire Mesh In The Form Is Very Important. Also, The Mat Surface Is Consequently Grooved To Provide Indentations Of Approximately 1/4 Inch In Depth And 1/8-inch Width. the Process Includes The Concrete Compacted To The Depth Of A Government Furnished Form By The Use Of Vibration. The Concrete Is Properly Consolidated With No Rock Pockets, Excessive Voids Or Honeycombs Visible On The Mat Surface. The Concrete Is Struck Flush With The Top Of The Forms And Given A Uniform Surface Finish And Uniform Thickness. Any Squares Not Meeting Government Furnished Specifications Are Rejected. requirements: the Contractor Shall Design And Develop A Semi-automated Casting Facility On The Grounds Of The Exiting Government Casting Yard That Can Produce A Minimum Of 50,000 Squares Per Calendar Year Per Shift With The Maximum Capability Of 150,000 Squares Annually With 3 Shifts. The Main Goals Of This Project Include: year-round, Indoor Casting Capability With No Weather-related Quality Issues During Production scalable Based On Number Of Operating Shifts reduced Touchpoints Via Automation high Quality, Increased Production, Improved Efficiency And Consistency improved Safety skilled Labor And Reduced Work Force require Fewer Forms (improved Consistency) heat/steam Curing To Reduce Cement Usage, Decrease Co2, And Higher Strength In A Shorter Timeframe modern Batching System Will Be More Efficient And Provide A Constant Mix Design eliminate The Use Of Separation Paper Between Squares the New Automated Facility Will Cast Acm Using Coarse And Fine Aggregate, Portland Cement, Fly Ash, Air-entraining Admixtures, And Calcium Chloride To Produce Articulated Concrete Squares, To Government Specifications. Squares Of Mattress Shall Be Provided In Stacks Of Up To 14 That Are Neatly Aligned Vertically And Will Be Placed In The Storage Yard In Rows By The Operational Contractor Using Government Furnished High Lift Cranes. Squares Cast Will Be Identical With Minimal Tolerance And Have Compressive Design Strength Of 3,000 Psi At 28 Days. Quality Is The Utmost Importance. Steam Curing And Other Technologies For Concrete Preparation Will Be Included While The Overall Design And Specifications Of The Mattress Will Remain The Same. the Design Of The Automated Facility Will Be Part Of The Contract And Will Ensure That The Facility Design Has Been Adequately Coordinated Between All Disciplines. Specifically, The Capacity Of The Infrastructure Within The Facility Shall Be Designed To Meet The Demands Of The Equipment Within The Facility. The Design Will Be A Two-phase Design Build Project And Will Require The Contractor To Procure Automation Equipment That Meets All “buy American” Requirements And The Design Will Meet All Required Policies For A Dod Facility. Several Of The Main Required Policies Are Listed Below: department Of Defense (2019). Unified Facilities Criteria, Facilities Criteria And Unified Facilities Guide Specifications, Mil-std-3007g. department Of Defense (2024). Dod Building Code, Ufc 1-200-01. department Of The Army (1999). Engineering And Design For Civil Works Projects, Er 1110-2-1150. department Of The Army (2024). Safety And Occupational Health (soh) Requirements, Em 385-1-1. dod Design Criteria: Https://www.wbdg.org/ffc/dod/unified-facilities-criteria-ufc all Designs Shall Be In Accordance With All Local, State, And Federal Laws And Regulations. interested Firms Should Submit A Capabilities Package To Include The Following: The Prime Firm And/or Its Subcontractor(s) (hereinafter Referred To Collectively As “firm”) Shall Have Relevant Experience In Mass Production Of Casting Concrete Products. The Firm Shall Demonstrate Experience Using Pre-cast Concrete. This Experience Must Have Been Performed Within The Last Five Years. firm’s Response To This Synopsis Shall Be Limited To 10 Pages And Shall Include The Following Information: firm’s Name, Address, Point Of Contact, Phone Number And E-mail Address. firm’s Prior Experience In Pre-cast Concrete. firm’s Capability To Perform A Contract Of This Magnitude (> $20m) And Complexity. firm’s Business Size (small Business, Large Business, .etc.) And Bonding Capacity. firms Overall Approach To The Requirements Listed Above. the Firm’s Capability For Performing A Design Build Contract For The Entirety Of This Requirement (facility And Equipment). any Assumptions Or Constraints In The Overall Execution Plan. a Rough Order Of Magnitude (rom) Estimate For The Completed Project. interested Firm’s Shall Respond To This Sources Sought Announcement No Later Than 12:00pm Cst, 5 January 2025. All Interested Firms Must Be Registered In Sam. No Reimbursement Will Be Made For Any Costs Associated With Providing Information In Response To This Synopsis Or Any Follow Up Information Requests. Respondents Will Not Be Notified Of The Results Of The Evaluation.
Closing Date5 Jan 2025
Tender AmountRefer Documents 

DEPT OF THE NAVY USA Tender

Civil And Construction...+1Civil Works Others
Corrigendum : Closing Date Modified
United States
Details: This Procurement Is For A Multiple Award Construction Contract (macc) And Will Be Advertised On An Unrestricted Basis Inviting Full And Open Competition. This Procurement Will Use A Single-phase Source Selection Procedure With The Intent To Award Approximately Three (3) Or More Indefinite Delivery Indefinite Quantity (idiq) Construction Contracts To Responsible Offerors Whose Proposals, Conforming To The Request For Proposal (rfp), Will Be Most Advantageous To The Government Resulting In The Best Value, Price And Other Factors Considered. Price Evaluation Preference Will Be Given To Hubzone Small Business Concerns, In Accordance With Far 52.219-4. This Is An Idiq Contract With No Pre-established Fixed Contract Prices. The Actual Amount Of Work To Be Performed And The Time Of Such Performance Will Be Determined By The Contracting Officer Or His/her Properly Authorized Representative, Who Will Issue Written Task Orders To The Contractor. Award Of Task Orders Will Be On A Firm Fixed Price Basis. The Workto Be Acquired Under This Solicitation Is For Demolition Services At Hunters Point Naval Shipyard, San Franciso, California.the Work May Include Site Preparation Activities, Such As Excavating And Grading, Demolition Of Buildings And Other Structures, And Septic System Installation; Earthmoving And Land Clearing For All Types Of Sites (e.g., Building, Nonbuilding, Mining). Establishments Primarily Engaged In Construction Equipment Rental With Operator (except Cranes) Are Also Included.the North American Industry Classification System (naics) Code Is 238910 (site Preparation Contractors), And The Annual Size Standard Is $19 Million. The Macc Will Consist Of One Base Period Of Two (2) Years And Three (3) One Year Option Periods For A Total Maximum Duration Of Five (5) Years. The Aggregate Maximum Value, Including The Base And Option Periods, For All Contracts Combined Is $999,000,000. The Only Work Authorized Under This Contract Is Work Ordered By The Government Through Issuance Of A Task Order. Task Orders Will Range Between $10,000,000 And $150,000,000. Task Orders May Fall Below Or Above This Limit; However, Contractors Are Not Obligated To Accept Such Task Orders Under The General Terms Of The Contract. The Government Makes No Representation As To The Number Of Task Orders Or Actual Amount Of Work To Be Ordered; However, During The Term Of The Contract, A Minimum Of $5,000 Is Guaranteed To Be Ordered From Each Awardee, Under The Performance Period Of The Contract. Contractors Are Not Guaranteed Work In Excess Of The Minimum Guarantee.no Site Visit Or Pre-proposal Conference Will Be Conducted. The Solicitation Will Be Available Inelectronic Format Only. No Hard Copies Will Be Provided. It Is The Contractor?s Responsibility To Check The Website Daily For Any Amendments To This Solicitation. Prospective Offerors Must Register Themselves On The Website. Plan Holders Lists Will Not Be Faxed And Will Be Available Only At The Website Listed Above. A Market Research Was Conducted That Included An Assessment Of Relevant Qualifications And Capabilities Of Potentially Qualified Firms. As A Result Of The Market Research Analysis, A Determination Was Made To Solicit This Procurement As Unrestricted. The U.s. Small Business Administration (sba) San Diego District Office And The Navfac Sw Small Business Office Concurred With This Decision.
Closing Date7 Jan 2025
Tender AmountRefer Documents 

Department Of Public Works And Highways - DPWH Tender

Civil And Construction...+2Civil Works Others, Automobiles and Auto Parts
Philippines
Details: Description Invitation To Bid 1. The Department Of Public Works And Highways Through Its Bids And Awards Committee, Through The Gaa 2024, Intends To Apply The Sum One Million Nine Hundred Fifty-five Thousand Seven Hundred Pesos & 00/100 (php1,955,700.00) Being The Approved Budget For The Contract (abc) To Payments Under This Contract: 1 Contract Id 24gnc0020 Contract Name: Procurement Of Diesoline Use For Service Vehicle Shh115, Shh-287, Shk-302, Bo-jo50, Cdk-1061, 151008 (terra), 123002, 151008 (navarra), 151010, Shh104, Shr 321, Kgk-439, Skc-923, Hydraulic Mounted Crane 150102, Dumptruck H3-6628, Dumptruck Sna6467, Hydraulic Excavator And Road Roller Z18-463, Genset 10 Kva Assign In Maintenance Section. (for Emergencies And Calamities) Abc: Php1,955,700.00 Contract Duration: 90 Calendar Days Bid Documents Fee: Php5,000.00 Bids In Excess Of The Abc For Each Lot Shall Be Automatically Rejected. 2. The Department Of Public Works And Highways Through Its Bids And Awards Committee Now Invites Bids For The Aforementioned Projects. Delivery Of The Goods Is Required Ninety (90) Calendar Days From Issuance Of Notice To Proceed. Bidders Should Have Completed, Within One (1) Year From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instruction To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Nondiscretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From The Bac Secretariat And Inspect The Bidding Documents At The Address Given Below During Monday To Friday At 8:00 To 5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 18, 2024 Until Before 1:00 Pm Of January 08, 2025 From The Given Address And Website(s) Below And Upon Payment Of Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (php5,000.00) Only. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, Or Facsimile. 6. The Department Of Public Works And Highways Through Its Bids And Awards Committee Will Hold A Pre-bid Conference On December 26, 2024, 10:00 Am At Dpwh Agusan Del Sur 2nd Deo, Procurement Unit, Bac Conference Room San Francisco, Agusan Del Sur And Through Zoom (meeting Id:857 8025 0282 And Passcode: 624749 And Livestreamed On Youtube Channel: Http//www.youtube.com/@dpwh.ads2deo, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At Dpwh Agusan Del Sur 2nd Deo, Procurement Unit, Bac Conference Room San Francisco, Agusan Del Sur On Or Before January 08, 2025, 1:00 P.m. Late Bids Shall Not Be Accepted. Bidding Documents May Be Purchased And Bid Proposals May Be Submittedthrough An Authorized Representative Together With The Original Special Power Of Attorney (spa) For Sole Proprietorship; Or Board/partnership/joint Venture Resolution With Secretary’s Certificate For Corporation/partnership/joint Venture/cooperative) Which Is Contract Specific And Presentation Of Company Id Or Any Government Issued Id 8. All Bids Must Be Accompanied By A Bid Security/bid Securing Declaration In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On January 08, 2025, Immediately After The Deadline For The Submission Of Bid At Dpwh Agusan Del Sur 2nd Deo, Procurement Unit, Bac Conference Room San Francisco, Agusan Del Sur And Live Streamed On Youtube Channel: Http//www.youtube.com/@dpwh.ads2deo. Bids Will Be Opened In The Presence Of The Bidder’s Representative Who Choose To Attend The Activity. 10. The Department Of Public Works And Highways Through Its Bids And Awards Committee Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Iir Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Bac Chairperson: Wilfred R. Visaya Address: Karaos, San Francisco, Aqusan Del Sur Telephone No. (085) 343-8726 Email Address: Dpwhkaraosbac@gmail.com Bac Secretariat Head: Thelma S. Espeso Address: Karaos, San Francisco, Aqusan Del Sur Telephone No. (085) 343-8726 12. You May Visit The Following Websites: For Downloading Of Bidding Documents: Philippine Government Electronic Procurement System (philgeps), And Website Of The Department Of Public Works And Highways Https://www.dpwh.gov.ph/dpwh/business/procurement/gs/advertisment Date Of Publication: December 18, 2024 At Dpwh Website & Philgeps Wilfred R. Visaya Oic-assistant District Engineer Bac- Chairperson
Closing Date8 Jan 2025
Tender AmountPHP 1.9 Million (USD 33.6 K)

Municipality Of Tuba, Benguet Tender

Civil And Construction...+1Civil Works Others
Philippines
Details: Description Invitation To Bid For The Procurement Of Various Infrastructure Projects Project Id No. 2024 - 12 - 021 1. The Municipality Of Tuba, Through Municipal Supplemental Budget No. 3 Cy 2024, Approved By The Sangguniang Bayan Intends To Apply The Corresponding Sums Of The Following Projects Listed Below Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Each Lot: Lot No. Project Title Project Location Project Description Cds To Compl-ete Minimum Equipment Required Source Of Fund Abc Lot 1 Improvement Of Bailey Bridge At Camp 6 Camp 4, Tuba, Benguet Project Billboard; Construction Safety And Health Requirement; Installation Of Bailey Bridge (phase 1) 63 Cds Dump Truck (6-8.99 Yd3), Crawler Crane (21-25 Metric Ton), Welding Machine (500a), Scaffolding Pipes (set), Cutting Machine Municipal Supplemental Budget No. 3 Cy 2024 - Nw 3,000,000.00 Lot 2 Construction Of Lubnac Waterworks System Camp 1, Tuba, Benguet Project Billboard/signboard; Construction Safety And Health Requirements; Structure Excavation; Reinforced Concrete; Masonry Works; Metal Structures; Plumbing Works; Electrical Works 62 Cds Water Well Drill, Mini Cargo Truck (3.00 Cu.m.), One Bagger Mixer, Bar Cutter, Bar Bender, Welding Machine, Minor Tools (10% Of Labor Cost) Municipal Supplemental Budget No. 3 Cy 2024 - Nw 1,000,000.00 Grand Total 4,000,000.00 Bids Received In Excess Of The Abc For Each Lot Shall Be Automatically Rejected At Bid Opening. 2. The Municipality Of Tuba Now Invites Bids For The Above Procurement Projects. Completion Of The Works Is Required In (see Expected Contract Duration Listed Above For Each Lot). Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Nondiscretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 4. Interested Bidders May Obtain Further Information From The Municipality Of Tuba And Inspect The Bidding Documents At The Bac Office, Municipal Building, Poblacion, Tuba, Benguet From 8:00 A.m To 5:00 P.m. From Monday To Friday. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 10, 2024, At The Municipal Bids & Awards Committee, Municipal Hall, Poblacion, Tuba, Benguet, And From The Website Given Below Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Through Official Receipt And Order Of Payment. "6. The Municipality Of Tuba Through The Bids And Awards Committee (bac) Will Hold A Pre-bid Conference On December 18, 2024 At 8:00 A.m. At The Municipal Bac Office, 2nd Floor, Municipal Building, Poblacion, Tuba, Benguet, Which Shall Be Open To Prospective Bidders. " 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, On Or Before January 03, 2025 At 8:30 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. "9. Bid Opening Shall Be On January 03, 2025 At 9:00 A.m. At The Bac Office, 2nd Floor, Municipal Building, Poblacion, Tuba, Benguet. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. " 10. In Case There Will Be A Tie Between Bidders, All Those Who Have Passed Post-qualification And Offered The Same Financial Bid Price, A Tie-breaking Method Through “draw Lots” Will Be Used To Determine The Winning Bidder. 11. The Municipality Of Tuba Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. Failure To Sign Each And Every Page Of The Bid Form, Including The Attached Schedule Of Prices Shall Be A Ground For The Rejection Of Bid. 13. For Further Information, Please Refer To: Roshield W. Duguies, Arlene D. Bangit, Venus P. Rimando, Edith G. Labbot And Kevin Yaris At The Municipal Hall, Poblacion, Tuba, Benguet From 8:00 Am To 5:00 Pm Only, Mondays To Fridays At Tel No. (074) 442-1267 And E-mail Address: Bac_lgutuba2020@yahoo.com. However, Any Queries Relative To The Contents Of The Bid Documents And The Project Requirements Can Only Be Made By Bidders Who Purchased The Bid Documents Not Later Than Ten (10) Days Prior To The Submission And Opening Of Bids And Have Viewed And Ordered Through Our Posting At Philgeps. 14. To Bid For This Contract, A Bidder Must Meet The Following Major Criteria; A. Duly Licensed Filipino Citizens/sole Proprietorship 75% Filipino-owned Partnerships, Corporations, Cooperatives, Or Joint Ventures; B. Must Be Registered In The Philgeps Or Procurement Service; C. With A Pcab License; D. Prospective Bidder Must Have Completed An Slcc That Is Similar To The Contract To Be Bid, And Whose Value, Adjusted To The Current Prices Using The Psa Consumer Price Indicates, Must Be At Least Fifty Percent (50%) Of The Abc To Bid: Provided, However, That Contractors Under Small A & B More The Allowable Range Of Contract Cost (arcc) Of Their Registration Based On The Guidelines As Prescribed By The Pcab. Computation Of A Prospective Bidder's Nfcc Must Be At Least Equal To The Abc To Be Bid. Further, Hard Copies Of Bidding Documents Will Be Issued By The Bac Secretariat At The Bac Office, Municipal Hall, Tuba, Benguet Upon Payment At The Municipal Treasury Office For The Corresponding Fees. 15. You May Visit Our Website For Downloading Of Bidding Documents: Tuba.gov.ph Date Of Issue: Jackson L. Pasamic 10-dec-24 Me Bac Chairperson
Closing Date3 Jan 2025
Tender AmountPHP 4 Million (USD 69 K)

National Irrigation Administration Tender

Civil And Construction...+1Irrigation Work
Philippines
Details: Description Contract Reference No.: Cw-buk-resto-cis-tigua-2024-004 1. The National Irrigation Administration - Bukidnon Irrigation Management Office Through Its Bids And Awards Committee (bac) Intends To Apply The Sum Of Eighteen Million Two Hundred Twenty Two Thousand Five Hundred Seventy Five Pesos And Seventy Four Centavos (₱ 18,222,575.74) Being The Approved Budget For The Contract (abc) To Payments Under The Resto-cis Fund Of Cy 2025 For The Restoration Of Damaged Siphon At Main Canal Sta. 4+778-4+850 Of Tigua Cis In San Fernando, Bukidnon (epa) With Contract Ref. No. Cw-buk-resto-cis-tigua-2024-004. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Nia Bukidnon Imo Now Invites Bids For The Above Procurement Project. Completion Of The Works Is Required Within One Hundred Fifty (150) Calendar Days. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 4. Interested Bidders May Obtain Further Information From Nia Bukidnon Imo And Inspect The Bidding Documents At The Address Given Below From Mondays Through Fridays At 8:00 A.m. To 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders Upon Presentation Of Letter Of Intent (loi), Certificate Of Site Inspection, Original Pcab License, Philgeps Platinum Registration (all Pages) Until 9:00 A.m. Of January 7, 2025 From The Given Address Below And Upon Payment Of The Non-refundable Fee For The Bidding Documents In The Amount Of Twenty Five Thousand Pesos (₱ 25,000.00) Only. Only The Owner/proprietor (for Sole Proprietorship), Authorized Managing Officers/general Managers And/or Presidents (for Corporations/joint Ventures) And So Forth, Are Allowed To Purchase The Bidding Documents. For Authorized Representatives, Presentation Of A Special Power Of Attorney (spa)--specifying The Contract Reference No., Project Description And Abc Of The Bidding Documents To Be Acquired–is A Must. 6. The Nia Bukidnon Imo Will Hold A Pre-bid Conference At 9:30 A.m. On December 26, 2024 At The Address Below Which Shall Be Open To All Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below On Or Before 9:00 A.m. Of January 7, 2025. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. Bagontaas, Valencia City, Bukidnon, 8709 Philippines Telephone No.: (088) 828-0658 • Email: R10.bukidnon-imo@nia.gov.ph Website: Https://region10.nia.gov.ph • Tin: 000-916-415-129 Nia-bimo-odm-bac-int-form28-rev.01 Republic Of The Philippines National Irrigation Administration Regional Office No. X (northern Mindanao) Bukidnon Irrigation Management Office 9. Bid Opening Shall Be At 9:30 A.m. Of January 7, 2025 At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. Other Relevant Information: Minimum Equipment Required: 1 Water Truck, 1 Backhoe, 1 Dump Truck, 1 One-bagger Mixer, 1 Concrete Vibrator, 1 Bar Cutter, 1 Plate Compactor, 1 Centrifugal Pump, 1 Unit Crawler Crane, 1 Unit Jackhammer With Compressor, 3 Cylindrical Concrete Molders, 1 Total Station Key Personnel Required: 1 Project Engineer, 1 Foreman, 1 Materials Engineer, 1 Liaison Officer 1 Surveyor, 1 Safety Officer Additional Instructions: All Prospective Bidders Are Encouraged To Conduct A Site Inspection To Properly Evaluate The Site Conditions And Project Requirements Before Submitting Their Bids. The Schedule For The Site Visit Will Be Determined During The Conduct Of The Pre-bidding Conference. Pursuant To Sec 34.3(b)(ii) Of The 2016 Revised Irr Of Ra 9184, Post Qualification Will Focus On: Ii). Verification Of Availability And Commitment, And/or Inspection And Testing For The Required Capacity And Operating Conditions Of Equipment Units To Be Owned/leased/under Purchase By The Bidder For Use In The Contract Under Bidding, As Well As Checking The Performance Of The Bidder In Its Ongoing Government And Private Contracts, If Any Of These Ongoing Contracts Shows: Negative Slippage Of At Least Fifteen Percent (15%) In Any One Project Or A Negative Slippage Of At Least Ten Percent (10%) In Each Of Two (2) Or More Contracts; Failure Of The Contractor To Commence Repair Works On Ongoing Contracts Within Seven (7) Calendar Days And To Complete Them Within Thirty (30) Calendar Days After Receipt Of The Procuring Entity’s Notice Of Defects And Deficiencies; Failure Of The Contractor To Commence Repair Works On Contracts With Pending Certificates Of Acceptance Within Thirty (30) Calendar Days And Complete Them Within Ninety (90) Days After Receipt Of The Procuring Entity’s Notice Of Defects And Failures; Or Substandard Quality Of Work As Per Contract Plans And Specifications, Or Unsatisfactory Performance Of The Contractor’s Obligations As Per Contract Terms And Conditions, At The Time Of Inspection. If The Bac Verifies Any Of These Deficiencies To Be Due To Contractor’s Fault Or Negligence, The Agency Shall Disqualify The Contractor From The Award, For The Procurement Of Infrastructure Projects. Bagontaas, Valencia City, Bukidnon, 8709 Philippines Telephone No.: (088) 828-0658 • Email: R10.bukidnon-imo@nia.gov.ph Website: Https://region10.nia.gov.ph • Tin: 000-916-415-129 Nia-bimo-odm-bac-int-form28-rev.01 Republic Of The Philippines National Irrigation Administration Regional Office No. X (northern Mindanao) Bukidnon Irrigation Management Office 11. The Nia Bukidnon Imo Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Delsie Belle M. Acobo Bac Secretariat Head Nia Bukidnon Imo P-10, Bagontaas, Valencia City, Bukidnon Email: Bacinfra.nia10bimo@gmail.com 13. You May Visit The Following Websites: To View And Access The Bidding Documents, Visit Https://drive.google.com/drive/folders/1dplegk6-7hcbezlzolt3w-s5c8wvmnri. For Uniformity, Prospective Bidders Are Encouraged To Use The Given Standard Forms. However, Failure To Do So Shall Not Be Grounds For Disqualification. (sgd.) Belna M. Acobo Bac Chairperson
Closing Date7 Jan 2025
Tender AmountPHP 18.2 Million (USD 313.9 K)

EllisDon Construction Services Inc Tender

Aerospace and Defence
Canada
Details: Advanced Procurement Notice Future Fighter Capabilities Project (ffcp) Cfb Cold Lake, Ab (with Security Requirements) Purpose Of This Advanced Procurement Notice This Is Not A Bid Solicitation. This Is An Advanced Procurement Notice (apn) Of Potential Contracts With Anticipated Security Requirements To Provide Interested Contractors, Suppliers, And Vendors An Opportunity To Begin The Sponsorship Request Process For Potentially Obtaining The Required Security Clearance(s) That Are Anticipated. Note That There Is No Guarantee That These Contracts Will Proceed Or That Any Security Clearance(s) Will Be Granted Under The Sponsorship Process In A Timely Fashion Or Otherwise. Description Of The Project Ellisdon Construction Services Inc. (ellisdon) As The Design Builder, Along With Its Design Partner, Stantec Have Been Contracted To Provide Design Services And Constructability Oversight To Complete The Design Of The Royal Canadian Air Force (rcaf) Infrastructure That Will Support The Future Fighter Capability Project (ffcp). The Infrastructure Will Provide Shelter And A Working Environment Capable Of Supporting The Operation And Maintenance Of A Yet To Be Determined Advanced Fighter Aircraft. Design Has Progressed Significantly With Various Tender Packages Forthcoming Tentatively To Start In Q3 2024, With Project Construction Being Conditional On The Project Receiving Approval To Proceed From Dnd. details On Upcoming Projected Tender Packages To Follow Via Amendment. Prior To This, Ellisdon Is Seeking Interested Parties Consisting Of Trade Contractors, Vendors, And Suppliers To Ensure That They Have All Necessary Security Clearances In Place Prior To This As This Is A Requirement For This Project.    Description Of The Scope Of Works Project Construction Is Conditional On The Project Receiving Approval To Proceed From Dnd. Project Scope And Summary Are Noted Below. Contract Number:  71947 Title:  Modified Design Build Services For Fighter Squadron Facility Building Size: Approximately 555,000 Sf Anticipated Posting Date: q3 2024 Description: construction Of A New A Fighter Squadron Facility Consisting Of Two Fully Operational tactical Fighter Squadrons (tfs) And The Operational Training Unit (otu),  including But Not Limited to: Offices, Administrative Spaces, Mission Planning Rooms, Briefing / De-briefing Rooms, Meeting rooms, Classrooms, Auditorium, Speciality Training Rooms Including Simulators (sims) accommodations And Part-task Trainers Accommodations, Hangars, Maintenance Bay Facilities, specialty Aircraft Maintenance Labs, Shops And Storage, It Offices And Server Rooms, Building support Spaces, And Common Spaces. This Work Package Will Also Include The Construction Of Nearby Airfield Pavements, Apron And Taxiway Access Lane Edge Lighting, And Apron Flood Lighting consisting Of Concrete And Asphalt. Construction Of Infrastructure Will Encompass The Following Scopes Of Work. Scope Of Work, Using Masterformat Divisional Breakdown As A Reference, May Include, But Are Not Limited To: Masterformat Division             Scope Of Work 01 45 00                                 Surveying 01 45 00                                 Material Testing 01 45 00                                  Third Party Inspection (roof, Structural, Geotechnical) 01 52 00                                  Temporary Facilities (trailers, Toilets, Fencing, Waste Bins) 01 54 19                                  Tower Cranes 01 54 23                                  Scaffolding 02 41 19                                  Selective Demolition 03 11 00                                  Concrete Formwork 03 15 00                                  Concrete Accessories 03 20 00                                  Reinforcing Steel 03 30 00                                  Concrete Supply 03 35 00                                  Concrete Placing & Finishing 03 45 00                                  Precast Specialties 04 00 00                                  Masonry 05 10 00                                  Structural Steel 05 30 00                                  Metal Decking 05 50 00                                  Miscellaneous Steel 05 70 00                                  Ornamental (specialized) Metals 06 20 00                                  Millwork / Architectural Woodwork 07 10 00                                  Damp Proofing & Waterproofing 07 40 00                                  Metal Roofing, Cladding & Siding 07 50 00                                  Membrane Roofing 07 80 00                                  Firestopping & Fireproofing 07 90 00                                  Caulking 08 10 00                                  Openings – Doors, Frames & Hardware 08 33 00                                  Coiling Doors & Grilles 08 34 16                                  Hanger Doors 08 35 00                                  Folding Doors & Grilles 08 36 00                                  Overhead Doors 08 40 00                                  Aluminum Entrances, Storefronts & Curtain Wall 08 80 00                                  Glazing 08 87 00                                  Window Film 09 21 16                                  Gypsum Board Assemblies 09 51 14                                  Acoustic Panels 09 60 00                                  Flooring 09 66 00                                  Tiling 09 67 00                                  Fluid Applied Flooring 09 69 00                                  Access Flooring 09 90 00                                  Painting 10 11 00                                  Visual Display Boards 10 14 00                                  Signage 10 22 19                                  Demountable Partitions 10 26 00                                  Wall, Corner, Door Protection 10 28 00                                  Bathroom Accessories & Toilet Partitions 10 51 00                                  Lockers 10 75 00                                  Flagpoles 11 30 00                                  Appliances 11 61 00                                  Theater And Stage Equipment 11 66 00                                  Athletic Equipment 11 81 29                                  Fall Arrest Systems 11 98 00                                  Detention Equipment 12 00 00                                  Furnishings 12 20 00                                  Window Coverings 14 20 00                                  Elevator & Lifts 21 00 00                                  Fire Suppression 22 00 00                                  Mechanical – Plumbing 23 00 00                                  Mechanical – Heating, Ventilation And Air Conditioning (hvac) 25 00 00                                  Integrated Automation 26 00 00                                  Electrical 28 10 00                                  Access Control            31 00 00                                  Earthworks 31 60 00                                  Piling 32 10 00                                  Paving 32 16 00                                  Sidewalk Curb & Gutter 32 31 00                                  Fencing 32 90 00                                  Landscaping 33 00 00                                  Utilities & Underground 34 73 00                                  Airfield Construction - Apron 41 22 00                                  Overhead Cranes 48 16 00                                  Geothermal Energy Project Prequalification And Anticipated Security Requirements In Order To Be Eligible To Participate In The Upcoming Project Prequalification Process, The Interested Party Will Be Required To, Among Other Things, Actively Hold All Required Security Clearance(s) At The Time Of Closing. this Will Also Be Noted in All Upcoming Solicitation Tender Documents. As Of The Date Of Posting Of This Advance Procurement Notice, The Required Security Clearance(s) Are Anticipated To Be: * for Areas Established As Security And High Security Zones - A Valid And Active Facility Security Clearance (fsc) At The Level Of Secret Granted Or Approved By The Contract Security Program (csp), Public Works And Government Services Canada (pwgsc)   * For Areas Established As Public, Reception And Operations Zones - A Valid And Active Designated Organization Screening (dos) At The Level Of Reliability Granted Or Approved By The Contract Security Program (csp), Public Works And Government Services Canada (pwgsc) Industrial Security Program (isp) Sponsorship Defence Construction Canada (dcc) Is Providing Interested Parties Early Access To The Security Clearance Application Process Through Sponsorship Under Its Industrial Security Program (isp). Accordingly, Interested Parties That Are Interested In Submitting Or Participating In A Proposal/bid For These Procurements That Fall Under This Program And That Do Not Actively Hold The Above Identified Security Clearance(s) Should Begin The Security Clearance Application Process By Applying Through Dcc’s Isp. To Begin The Security Clearance Sponsorship Process, Please Submit A Sponsorship Request Application To Dcc By Following The Steps Identified On Dcc’s Website At: Https://www.dcc-cdc.gc.ca/industry/security-requirements In Their Sponsorship Request Application To Dcc, Interested Parties Are Asked To Quote The Following Information, Among Other Things: * Contract Number As Referenced Above; And * Level Of Clearance Requested To Be Sponsored For. Sponsorship Process Timeline Sponsorship Timeline Is Currently As Follows: * Thirty (30) Calendar Days Prior To Planned Tender Closing, For Designated Organization Screening (dos); And * Sixty (60) Calendar Days Prior To Planned Solicitation/tender Closing, For Facility Security Clearance (fsc) At The Level Of Secret. Questions Any Questions Pertaining To The Isp Sponsorship Process Outlined In This Advanced Procurement Notice Can Be Addressed To: Telephone: (613) 998-8974 Email Address: Isp.sponsorship@dcc-cdc.gc.ca Any Questions, Exclusive Of Security Sponsorship, Relating To This Advanced Procurement Notice Can Be Addressed To: Scott Barabash, Cet, Gsc, Cec Senior Estimator Ellisdon Construction Services Inc. 780-444-3042 Sbarabash@ellisdon.com Disclaimer Dcc Nor Ellisdon Do Not Provide Any Assurances Or Guarantees That A Sponsorship Request Package Or A Security Clearance Application Forwarded To The Contract Security Program (csp), Public Works And Government Services Canada (pwgsc) On Behalf Of A Interested Party Will Be Successful Or Result In The Granting Of The Requested Security Clearance(s) By The Csp, Pwgsc, In A Timely Fashion. At All Times, The Processing Of A Sponsorship Request Package Or A Securiy Clearance Application Is Subject To The Respective Terms, Conditions, And Timelines Of Dcc's Isp Sponsorship Process And The Csp, Pwgsc's Security Clearance Granting Process. By Applying To Either Of The Aforementioned Processess, The Interested Party Accepts And Agrees To Bear Any Risks Associated With: (i) The Completeness Or Accuracy, Or Lack Thereof, Of Its Application Or Related Documents Submitted Under Or In Connection With Either Said Processes, And (ii) The Timeliness, Or Lack Thereof, Of Any Processing Or Granting Of Security Clearance(s) Under Or In Connection With Either Said Processes.
Closing Date6 Jan 2025
Tender AmountRefer Documents 
211-220 of 218 archived Tenders