Corazon Locsin Montelibano Memorial Regional Hospital doh R6 Tender

Description Item Description Abc Unit Quantity 1 Electroencephalography Machine 3,516,000.00 Unit 1.00 Republic Of The Philippines Department Of Health Corazon Locsin Montelibano Memorial Regional Hospital Bacolod City Engineering Facilities Management Technical Specification Sheet Name Of Equipment: Electroencephalograph (eeg) Location / End User: Brain And Spine Care Center Display Display Resolution Up To 1915-1920 X 1075-1080 Pixels Number Of Display Up To 64 And One Mark Channel Channels When Multi-channel Electrode Junction Box And Mini Junction Boxes Are Used Up To 250 And One Mark Channel Display Modes Overwrite Page By Page Waveform Display Color Up To 16 Colors Or More Waveform Display On/off/freeze Provided Waveform Position Adjustment Provided Waveforn Sweep Speed 0.1, 0.2, 0.5, 1, 2, 5, 10, 15, 20, 30, 60s Or 5 Min/page Timing Mark 01, 1s Time Scale Off, 0.2, 1s Event Mark Displayed Eeg Scale Provided Multiple Displays Available Data Acquisition Total Inputs Of Input Up To 256 Or More Bipolar Input Up To 4 Or More Dc Inputs Up To 16 Or More Maximum Number Of 256 (2khz), 128 (5khz), 64 (10khz) Recorded Referential Electrodes And Sampling Frequency (clinical Line) Maximum Number Of Up To 256 (10khz Recorded Referential Electrodes And Sampling Frequency (extended Line For Research) Input Range ± 3.2mv Or ±12.8mv (selectable) Input Impedance Up To 200mω Internal Noise Level Less Than 1.5 Μvp-p (0.53 To 120hz) Cmmr 110db Or Greater (60hz) (eeg Inout) Time Constant 2s, 10s (selectable) High Cut Filter Up To 3000hz (- 18db/oct) Depending On The Sampling Frequency Offset Tolerance ± 1000mv A/d Conversion Up To 24 Or More Bits Sampling And Hold All Electrodes At The Same Time Sampling Frequency Up To 10,000hz (max) Data Processing Eeg Input Off, 1, 2, 3, (2.5), 5, 7, 10, 15, 20, 30, 50, 75, 100, 150, 200, 300, 500, 700, 1000 Μ V/mm Dc Inputs Off, 10, 15, 20, 20, 30, 50, 75, 100, 150, 200, 300, 500, 700, 1000 Mv/mm Time Constant Low Cut 0.001, 0.003, 0.03, 0.1, 0.3, 0.6, 1.0, 2.0, 5.0, 10.0s Filter 0.016, 0.03, 0.08, 0.16, 0.27, 0.53, 1.6, 5.3, 53, 159hz (- 6db/oct) High Cut Filter 15, 30, 35, 60, 70, 120, 300, 600, 1200, (- 12db/oct), 50 (rapid), 3000hz (- 18db/oct) Ac Filter 10/60hz ( Rejection Ration: 1/25 Or More) Power Requirements Line Voltage Ac 220 To 240vac Line Frequency 50/60hz Power Consumption Up To 750va (for Pc Unit And Display) Up To 1kva (pc Unit, Display, Photic Simulator, Control Unit And Analog Output Unit) Safety Type Of Protection Against Class 1 Electric Shock Type Of Bf Applied Part Electrode Jacks, Bipolar Jacks, Spo2 Connector, Co2 Connector Type Of Cf Connector Electrode Jacks, Bipolar Jacks Mode Of Operation Continous Dimensions Pc Unit Between 195-200(w) X 295-300(d) X 180-185 (h) Mm, 6.0-6.5 Kg. Isolation Unit 180-181 (w) X 318-320 (d) X 138-140 (h)mm, 12-13kg Photic Simulator Control Unit 150-155 (w) X 195-300 (d) X 70-75 (h)mm, 4.0-4.10kg Cart 560-570 (w) X 620-630 (d) X 825-835 (h)mm. 40-44kg Inclusions Cart Photic Lamp Computer (one Main Pc Unit Review With Printer Eeg Past (3jars) Skin Prep Gel Eeg Electrods 3 Sets (12pcs/set) On Site Trainings For End Users For 5 Days And Biomed Staff Note: Eeg Must Be Capable To Perform 3d Mapping Or Qeeg Supplier Requirements: I. Completion Period 1. Delivery, Installation, Testing And Commissioning Of The Equipment And Its Accessories, Including Training Of The End User And Biomed Staff Shall Be Completed Within Sixty (60) Calendar Days Upon Receipt Of The Purchase Order. Ii. Testing And Commissioning 1. The Supplier Shall Conduct Testing And Commissioning On Site. 2. Supplier Shall Ensure That The Equipment Is Functional And Safe Prior To Use. 3. After Th Conduct Of The Testing And Commissioning On Site, The Supplier Shall: 3.1. Submit To The End User The Hard And/or Soft Copy Of The Report. 3.2. The Soft Copy Of The Report Shall Be Submitted To The Official Email Of The End User And Biomed Section 3.3. Placement Of Preventive Maintenance And/or Calibration Sticker. 4. The Quality Of The Preventive Maintenance And Calibration Sticker Shall Be Water Proof With Excellent Adhesive. 5. The Preventive Maintenance And Calibration Sticker Shall Have The Following Details: Name Of Equipment Brand, Model, Serial Number, Location, Preventive Maintennance Date, Next Preventive Maintenance Due Date, Calibration Date, Next Calibration Due Date, And Performed By. Iii. Manual 1. The Supplier Shall Provide To The End User And Biomed Section The Hard Copy And/or Soft Copy Of The User Manual And Service Manual Iv. Training 1. The Supplier Shall Provide Basic Operation And Maintenanace Training To The End User And Technial Training With The Biomed Staff 2. The Supplier Shall Provide A One To Two (1-2) Weeks Of Training For Eeg Techncian/operator/end-user In Their Accredited Institution. 3. The Supplier Shall Provide Certificate Of Training To The End User And Biomed Staff Accompanied By Pictures As Proof Of Training. 3. The Training Certificate Provided Shall Not Indicate Training Expiration. 4. The Supplier Shall Provide A Hard And/or Soft Copy Of The Training Materials To The End User Nd Biomed Staff V. Maintenance 1. The Supplier Shall Conduct Preventive Maintenance And Calibration As Often As Specified In The Equipment Manual Within The Warranty Period. 2. The Supplier Shall Submit The Maintenance Schedule In Both Hard And/or Soft Copy To The End User And Biomed Section Before The Conduct Of Preventive Maintenance And Calibration. 3. The Supplier Shall Provide A Hard And/or Soft Copy Of The Service Report To End User And Biomed Section Every Completion And Preventive Maintenance And Calibration. 4. The Soft Copy Of The Service Report, Calibration Report, And Calibration Certificate Shall Be Sent To The Offcial Email With The Attached Proof Of Conduct Of Service Like Picture Containing Equipment, Date And Time, And Location To The End User And Biomed Section. 5. The Supplier Shall Coordinate With The End User And Biomed Section Before Prior To The Conduct Of Preventive Maintenance And Calibration. Vi. Documentary Requirements. 1. Original Brochure And/or Date Sheet(s) Of The Equipment Showing All The Technical Specifications In English Language. 2. Certificate Of Warranty- One (1) Year On Unit, Parts And Service. 3. Certificate Of Calibration (hard And/or Soft Copy). 4. Certificate Of Availability Of Spareparts And Support Service For Ten Years 5. Certified Service Engineer Or Technician For The Repair And Maintenance Of The Unit. 6. Certificate That The Brand Of Equipment Or Model Has Been In The Local Or International Market For At Least Ten Years. 7. Certificate That The Equipment And Its Accessories Are Brand New, Unused, Not Discontinued Models, And Are Not Subjected To Any Product Recall. Vii. Consumables And Others 1. The Supplier Must Guarantee That Consumables And Accessories Will Be Available For Minimum Of Five (5) Years. 2. The Supplier Shall Provide User's Manual, Warranty Card, Operation Manual With User Demonstration Cd And Other Applicable Accessories. Vii After Sales 1. The Supplier Shall Provide List Of Engineers Or Tchnical Staff Presently Employed By The Participating Bidder/supplier Or Authorized By The Manufacturer Who Shall Perform Corrective And Preventive Maintenance Of The Product. Attachment Of Photocopy Of Id And Training Certificate Specific To The Equipment. 2. Certification That The Bidder Shall Provide A Service Unit That The End User Can Use In Case The Equipment Will Be Pulled Out For Repair Or Maintenance Within The Warranty Period. 3. The Supplier Shall Provide List Of Engineer Or Technical Personnel With Name Of Engineer, Contact Number, And Email Presently Employed By The Bidder/supplier Or Authorized By The Manufacturer Who Shall Perform Corrective And Preventive Maintenance Of The Product. Attachment Of Photocopy Of Id And Training Certificate Specific To The Equipment. 4. The Supplier Shall Be Available And Respond Within 24/7 For Repair In Case Of Equipment Breakdown.