Computer Tenders

Purchaser Name: Department Of Computer Science Of The State Forests Them Stanis Aw Kostka Wisi Ski | Poland – Software Package Utilities – Odnowienie Wsparcia Dla Licencji Activeidentity Oraz Systemu Cms

Details: Description Republic Of The Philippines Province Of Quezon City Government Of Tayabas Invitation To Bid For Project #25-018 Procurement Of Closed-circuit Television (cctv) System (disaster Response And Rescue Equipment) – Drrmo 1. The City Government Of Tayabas, Through The 5% Drrm Fund 2025intends To Apply The Sum Seven Million Pesos (php 7,000,000.00) Being The Abc To Payments Under The Contract For Project # 25-018 Procurement Of Closed-circuit Television (cctv) System (disaster Response And Rescue Equipment) - Drrmo. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The City Government Of Tayabasnow Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By Within 56cd Upon Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Five (5) Year From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From City Government Of Tayabas And Inspect The Bidding Documents At The Address Given Below During 8:00 A.m. – 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 22, 2025 (wednesday), 8:00 A.m. – 5:00 P.m. From The Given Address And Website(s) Below, In The Amount Of Ten Thousand Pesos (p 10,000.00) Only. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees 6. The City Government Of Tayabaswill Hold A Pre-bid Conference On January 30, 2025 (thursday) 10:00 Am At Bids And Awards Committee Office, 2nd Floor New City Hall, Brgy. Baguio, Tayabas City, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, On Or Before February 11, 2025 (tuesday), 10:00 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On February 11, 2025 (tuesday), 10:01 A.m. At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Procuring Entity Is The City Government Of Tayabas With Email Address Of Bidsandawards@gmail.com For The Use Of A Back-up Data Or Cloud Storage For Large Files Uploaded For Online Bid Submission 11. The City Government Of Tayabasreserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Raymond S. Bermudez Head, Bac Secretariat 2nd Floor New City Hall, Brgy. Baguio, Tayabas City (042)-797-3778 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: Https://notices.philgeps.gov.ph/gepsnonpilot/tender/splashopportunitiessearchui.aspx?menuindex=3&clickfrom=openopp&result=3 Item No. Unit Description Qty 1. Lot Supply, Delivery, Installation, Testing, Integration And Commissioning Of Closed-circuit Television (cctv) System Project Scope 1. Laying Of Fiber Optic Network Backbone Having The Following Specifications: • 16-core Hybrid Fiber Optic Outdoor Armored Cable With Tight Buffered Fibers W/ Built-in Gi Wire For Aerial Mounting To Electric Posts. • Accessories Needed In The Installation Such As But Not Limited To: Large Size Metal Clams, Hooks, Pulleys, Fiber Cable Trays W/ Downspout (wiring System Bridge Application) W/ Support To Incase Cover And Organize Fiber Cables, Distribution Splice Box (in Needed) And Other Cablings • Backbone Route Should Strategically Covered All The Identified Locations Of The New Cameras To Be Installed And The Existing Cameras Already Installed. • Endpoint Should Be The Drrm Office And Have Extended Connection To New City Hall • Permits Needed (if Any) In The Laying The Fiber Backbone Shall Be Shouldered By The Supplier. 2. Networked Cameras Having The Following Components /specs: • 32 Pcs Of Network Camera 8-mp (3840x2160) @30 Fps. 24/7 Colored With Built-in Warm Illuminator (max Illumination Distance: 50 Meters), Supports Maximum Of 256 Gb Micro Sd Card With Built-in Mic And Speaker Also Supports Epoe, Ip67 Protection. • All Cameras Shall Be Powered By Electrical Via Poe Switch (4 Ethernet Port, 2 Port Uplink Ethernet 1.2gbps Over Ieee 802.3, 48v 3a For Ip Cameras, Ap Or Ip Poe Voip. Should Use Circuit Breaker 240vac (industrial Type) Ip20 Molded Case 3-pole 10/15amps. Necessary Permits Shall Be Shouldered By The Supplier For The Electrical Supplies. • 32 Pcs Of Fiber Optic Media Converter-gigabit, High Density Hot-swappable Media Converter Redundant Hot-swappable Ac And 12v Dc Power Supplies With Built-in-4-ports Switch 10x1000 Plus Hybrid A-b Tx/rx In One Device. • 32 Pcs Of Ip67 Terminal/utility Box 400mm X 300mm X 180 Mm With Key Lock, Ce/rohs/iso9001 Type Approved Bundled With Complete Mounting Screws And Metal Belts & Locks. • Materials, Paraphernalia Needed In The Installation And Networking Of The Cameras Like, But Not Limited To Network Cat-6e Outdoor Type Cable, Cable Tie, Screws, Metal Clamps, Gi, Wires, Outlets, Electrical Wires Rj45 Connectors, Nails, Sealant, Etc.) Are Included. 3. Main Cctv Network Cabinet, Monitoring, Control System And Main Storage Having The Following Components /specs: • 1 Pc Of 32u Network Data Cabinet Server Rack With Glass Door • 1 Pc Of Core Switch Fully Managed Aggregation Switch - 1200 Sfp+ Ports; (8) Plus Rj45 Ports: (2) Rj45 Serial Console Port L3 Static Routing, 1200 Switching Capacity, 1.2gbps Non- Blocking Throughput, Forwarding Rate 1.2gbps. With Needed Gigabit Ethernet Transceivers Modules Compatible With The Switch. • 1 Pc Of Rackmount Network Video Recorder: Up To 32 Channel Ipc Input, Smart H.265+/h.265/smart H.264+/h.264/mjpeg Decoding Format. Ai By Recorder & Ai By Camera: Face Detection And Recognition, Perimeter Protection, Smd Plus, Metadata, Anpr, Stereo Analysis, Heat Map, And People Counting Plus, Security Baseline 2.3., Supports 80,000 Gb Surveillance Hard Drive Each Nvr. • 1pc Of 1u 19-inch 24-cores Fiber Compatible Pull Type Rack Mount Main Splicing Box/termination Box Full Assembly With Either 16 Or 24 Output Ports • Rackmount Ups - 2.7kwatts / 3.0kva • 80 Tb (in Total) Surveillance Hard Drive 24/7 Operation. • 2 Sets Of Desktop Computer (not Assembled) - Intel Core I5 (or Equivalent) Processor (6m Cache, Up To 3.50 Ghz) / 8gb Ram / 128gb Solid State Drive + 1tb Hdd, 4gb Video Card, With 24-in Monitor, Keyboard And Mouse, Os License And Ms Office Included. • 2-sets Ultra-thin Bessel Surveillance Led 75" (6.25ft X 6.25ft) Tv To Be Mounted In The Wall With Enclosure Plus Ornamentation & Color Scheme. • Installation, Mounting Configuration And Integration Of The Stated Components Are Included. To Be Installed In The Drrm Office 4. Extension Of Cctv Network Cabinet And Monitoring Having The Following Components /specs: • 1 Pc Of Core Switch Fully Managed Aggregation Switch - 1200 Sfp+ Ports; (8) Plus Rj45 Ports: (2) Rj45 Serial Console Port L3 Static Routing, 1200 Switching Capacity, 1.2gbps Non- Blocking Throughput, Forwarding Rate 1.2gbps. With Needed Gigabit Ethernet Transceivers Modules Compatible With The Switch. • 1 Pc Of Rackmount Network Video Recorder: Up To 32 Channel Ipc Input, Smart H.265+/h.265/smart H.264+/h.264/mjpeg Decoding Format. Ai By Recorder & Ai By Camera: Face Detection And Recognition, Perimeter Protection, Smd Plus, Metadata, Anpr, Stereo Analysis, Heat Map, And People Counting Plus, Security Baseline 2.3., Supports 80,000 Gb Surveillance Hard Drive Each Nvr. • 1pc Of 1u 19-inch 24-cores Fiber Compatible Pull Type Rack Mount Main Splicing Box/termination Box Full Assembly With Either 16 Or 24 Output Ports • Installation, Mounting Configuration And Integration Of The Stated Components Are Included. To Be Installed In The New City Hall. 5. Integration Of The Of Existing Cctv Cameras To The New Cctv System With The Following Components: • Power-up The Existing Cameras Installed In Different Places And The Related Equipment, Control System. • Integrate The Cameras Into The Fiber Optic Backbone, Provided The Camera Location Is Within Range. 6. Assembly, Erection, And Installation Of Cctv Tower: • Assembly, Erection, And Installation Of The Cctv Tower And Its Components At The Roof Deck Of The Tayabas Drrm Building. • Integration Of The Tower With The Fiber Optic Network And The Overall Cctv System • Installation Of Lightning Arrester And Solar Powered Warning Tower Lights Beacon As Part Of The Tower Components. Refer To The Terms Of Reference Of The Project For More Details. 1 ***nothing Follows*** January 22, 2025 _____________________________________ Wilfredo S. Tomines Chairperson, Bids And Awards Committee

Details: Description Supply And Delivery Of Atomic Absoption Spectrophotometer (aas) And Total Organic Carbon/ Particulate Organic Carbon Analyzer (toc/poc) Atomic Absorption Spectrophotometer (aas) With Complete Accessories Aas Main Unit Optics Wavelength Range: At Least 185 - 900nm Monochromator: Aberation-corrected Czerny-turner Mounting Or Equivalent Number Of Grating Grooves: At Least 1800 Lines/mm Focal Length: At Least 300 Mm Grating Area: At Least 40 X 40 Mm Bandwidth: 0.2, 0.7, 1.3, 2.0l Nm (4-step Automatic Switching) Or Better Detector: Photomultiplier Tube Optics: Double Beam Background Correction: Self-reversal And Dueterium Or Equivalent Number Of Hollow Cathode Lamps: 6-lamp Turrent Or Better, And Capable Of 2 Lamps Simultaneously Lit (1 For Measurement And 1 For Warming Up For Next Measurement) Graphite Furnace Analyzer Heating Temperature Range: Ambient To At Least 3,000oc Setting Heating Condition: Maximum 20 Stages Heating Mode: Ramp Or Step Inner Gas Type: Dual Automatic Switching Type Or Equivalent Inner Gas Flow Rate: At Least 0 To 1.5 L/min With Cooling Water Flow Rate Monitor With Gas Pressure Monitor With Overcurrent Protection Unit With Furnace Block Cooling Check Flame Type: Air-cooled Premix Type Or Equivalent Burner Head: Titanium 10 Cm Slot Or Equivalent Nebulizer: Pt-ir Capillary, Ptfe Orifice, Ceramic Impact (capable Of Handling Hydrofluoric Acid) Or Equivalent Chamber: Engineering Plastic Or Equivalent Burner Atomizer: Manual Adjustment For Lateral Or Vertical, Automatic Position For Burner Height Angle Adjusment: Adjustable Burner Angle From 0 To 90o Type: Air-acetylene Flame And Nitrous Oxide-acetylene Flame Flow Rate Control: Automatic Fuel Gas Flow Rate Setting Of (0.1l/min Step) And Automatic Search Of Optimum Gas Flow Rate With Automatic Fuel Gas Leak Detector With Prevention Of Wrong Burner Head Use With Drain Tank Level Monitor With Flame Monitor With Gas Pressure Monitor With Automatic Flame Extinction Upon Power Outrage Or Sudden Power Interruption With Automatic Flame Extinction Via Vibration Sensor With Internal Fan Stop Sensor Autosampler Function: Capable To Perform Zero-point Calibration, Auto Diagnosis, Auto Rinse, Auto Mixing, And Random Access Compatibility: Flame And Furnace Measurement Sample Vial: At Least 2 Ml Reagent Vial: At Least 20 Ml Nozzle Rinse: Solvent Rinse Discharge Method Sampling Function: Dilution Function, Reagent Addition Function Syringe: At Least 250 Microliter Injection Volume: At Least 2 To 90 Microliter Repeatability: 1% Rsd For 20 Microliter Position: Minimum Of 8 Positions For Reagent And 60 Positions For Sample Software Can Perform Extrapolation Of Calibration Curve Range. If The Sample Concentration Exceeds The Calibration Curve, Additional Measurements Can Be Performed On Standard Solutions To Re-calculate The Concentration Real-time Drying And Ashing Progress Display During Furnace Measurement Capable To Set-up Sample Dilution And Spike-and-recovery Test With Overlay Function For Size And Shape Comparison Of Peak Profiles Training On The Use, Care And Maintenance Of The Equipment Other Accessories A. Complete Pc System Specification: Processor: Core I7-12700 (2.1ghz) Memory: 8gb Ddr4 3200 Storage: 1tb+256gb Ssd Display: 23.8" Ka242y (f02aka242y) Operating System: Win 11 Graphics Card: Gt1030 2gb Software: Office H&s Connectivity: Wifi/ Bt With Wireless Keyboard And Mouse B. Printer Specification: Resolution: At Least 720 X 720 Dpi Print Speed: Up To 9.0 Ipm For Black And 4.8 Ipm For Color Paper Feed Method: Friction Feed Number Of Paper Trays: 1 Paper Hold Capacity: Up To 50 Sheets Of Plain Paper (75gsm) Paper Size: A4, Letter, And Legal Interface: 2.0 Usb With 1 Set Of Refill (black, Cyan, Magenta, And Yellow Ink Bottle) C. One Set Of Standards (500 Ml) Mercury, Copper, Lead, Manganese, Cadmium, And Arsenic D. Hollow Cathode Lamp Mercury, Copper, Lead, Manganese, Cadmium, And Arsenic E. Regulator Acetylene And Argon F. Gas Cylinder, Uhp 1 Cylinder Acetylene Gas 3 Cylinders Argon Gas G. Water Circulator Circulation Method: Closed Loop Circulation Temperature Setting Range: At Least -20 To 30oc Temperature Control Accuracy: ± 2oc Or Better Pump Max Flow: 12 - 14 L/min Temperature Control: Refrigerator On-off Control Temperature Display: Digital Display Coolant: R407c Or Equivalent Cooling Capacity: At Least 1200w At Liquid Temperature 10oc H. Air Compressor During Flame Analysis Note: Warranty: Five (5) Year On Parts, Calibration, Service, Andpreventive Maintenance Service With Pm Kits Place Of Delivery - Nfrdi Quezon City Delivery Period: 30 To 45 Days Upon Receipt Of Ntp "total Organic Carbon / Particulate Organic Carbon System" Measurement Method: 680°c Combustion Catalytic Oxidation – Non Dispersive Infrared Detection (ndir) Method Operation Method: Pc Controlled Toc "measured Items: Tc, Ic, Toc (=tc-ic), Npoc (non-purgeable Organic Carbon, Toc Measurement Via Acidification And Sparging)" Applicable Samples: Aqueous Sample (optional Solid/gas Samples) Measurement Range: Tc: 0 To 30,000 Mg/l; Ic: 0 To 35,000 Mg/l (option); Tn: 0 To 10,000 Mg/l; Poc: 0 To 500 Mg/l Detection Limit: Tc, Ic: 4 Μg/l, Tn: 5 Μg/l Reproducibility: Tc, Ic, Npoc: Cv 1.5 % Max. Or ±4 Μg/l Max Measuring Time: Tc : Approx. 3 Mins; Ic : Approx. 3 Mins Sample Injection: Automatic Injection Using A Syringe Pump And Slide Type Injection Mechanism Sample Injection Volume: 10 To 2,000 Μl Variable Ic Removal: Automatic Addition Of Acid And Sparging Sample Dilution: Dilution Rate Of 2x To 50x (automatic Sample Dilution By Syringe Pump); Dilution Accuracy: ±2 % Max. (2x To 20x); ±5 % Max. (21x To 50x) "display And Operations: Operation By Color Lcd Screen And Keyboard" "carrier Gas: High-purity Air (co, Co2, Hc Content: Each 1 Ppm Max., Dew Point: -50 °c Max.); Supply Pressure: 200±10 Kpa (additional Use Of Optional Carrier Gas Regulator: 300 To 600 Kpa)" Gas Consumption: 150 Ml/min (230 To 250 Ml/min During Sparging) (variable Flow Rate) Power Supply: 100 To 240 V Ac, 600 Va Ambient Temp Range: 5 To 35°c Dimensions: W340 X D660 X H480 Mm Weight: Approx. 35 Kg "asi-l Autosampler: 24 Ml Vials, Capacity: 24 Ml X 93 Samples Can Be Added During Continuous Measurement. Includes: 100 Pcs Of 24ml Vials With Cap And Septum, 2sets Magnetic Stirrer With Stir Bars" Inclusive Of: "complete Standard Accessories/ Consumables (as Spare): Halogen Scrubber Carbon Dioxide Absorber Combustion Tube Standard Catalyst Quartz Wool (1g)" Toc-l Software "complete Computer Set (dell Desktop) Intel Core I5, Windows 10 Pro, 16gb Ram, 1tb Hdd + 256gb Ssd" Printer (epson Or Hp Continuous Colored Ink Printer) Microsoft Office With License Complete Gas Line Installation For Air (with Regulator, On/off Valve) Avr, 3 Kva 1 Tank Of Synthetic Air (for Initial Use) Suspended Sample Kit For Toc And Autosampler, 2 Pcs. Each High-salt Sample Combustion Kit High Suspension Kit Standard, Potassium Hydrogen Phthalate (khp) "solid Sample Combustion Unit Capable Of Toc And Poc Measurements In Solid Samples Tc Oxidation Method: Combustion Catalytic Oxidation (tc Furnace Temperature: 900 °c) Maximum Sample Amount: 1 G Carrier Gas: 99.9 % O2 At 500 Ml/min Features: Measurement Of Maximum 1 G Samples With Up To30 Mg Carbon Content Reduces Weighing Errors, And Errors Due To Uneven Distribution Of The Sample Carbon Content. Measurement Of Inorganic Carbon (carbonate) In Solid Samples. Measurement Of Aqueous Samples Containing Large Quantities Of Suspended Substances. " "tnm-l Tn (total Nitrogen) Unit Measurement Method: Chemiluminescence Measured Items: Tn (total Nitrogen) Measurement Range: 0 To 10,000 Mg/l Detection Limit: 5μg/l (cph, Csn) Reproducibility: Cv 3 % Max. Measuring Time: Approx 4 Min" Synthetic Air Generator (as Alternative From Using Synthetic Air Tank) "warranty: One (1) Year On Parts Five (5) Years Preventive Maintenance Service And Pm Kit (once A Year For 5 Years)" "training: 1. Includes On-site Training On Basic Instrument Principles, Operation, Maintenance, And Troubleshooting By Chemist/engineers Of The Company 2. Includes Follow-up Trainings And Assistance On The Operation. 3. Training On Toc Principles, Operation, Maintenance And Troubleshooting For Two (2) Pax." Note: Warranty: Five (5) Year On Parts, Calibration, Service, Andpreventive Maintenance Service With Pm Kits Place Of Delivery - Ffrdc, Butong, Taal, Batangas Delivery Period: 45 Days Upon Receipt Of Ntp

Details: Rfi Will Be Revised. Please Hold Off On Repsonses. *************************************************** introduction the Army Program Director-base Emergency Communications Systems (pd-becs) Is Seeking Companies That Can Engineer, Furnish, And Install Computer‑aided Dispatch(cad), Next Generation 9-1-1 Call Handling Systems (ng-911 Ch), And Ng-911 Location Information Services(lis) In Support Of The Pd-becs Public Safety Answering Point (psap) Modernization Efforts. installations, Garrisons, And Other Army Operational Sites Use Different Names For Communications Centers Including Dispatch Centers, Integrated Incident Management Centers, Emergency Communications Centers(eccs), Incident Operations Centers, Fire Alarm Controlcenters, Etc. The Term Psap Is Used Generically To Represent Those Centers. Psap Modernization Will Bring Base Emergency Response Systems Into Compliance With The Current Version Of The Next Generation 9-1-1 (ng-911) I3 Standard (sta-010) Published By The National Emergency Number Association (nena), The Department Of Defense Public Safety Communications Directives And Instructions And Army Cyber Security Policies. The Army Operates Psaps At Thirty-eight (38) Conus Installations Supporting Organic Law Enforcement, Fire Protection, And Emergency Medical Services To A Combined Population Of Approximately 400,000 Active‑duty Military, Civilians, And Dependents. scope the Us Army Seeks A Balance Between Mature And State-of-the-art Technology That Enables The Employment Of Solutions That Will Prolong The Life Of The New System. Theusarmy Envisions That Its Modern Cad And Ng-911 Ch Solutions Will Be Based On Proven Technology Derived From Current Industry Standards. the Ng-911 Ch Solution Shall Be A Complete, On-premises System With Fully Redundant Host Controllers/servers, Call Taker/operator Consoles, Voice Recording, And Integrated Automatic Location Information (ali) Database. Thesystemshall Support Inbound Calls From Army-owned And Operated Voice Wireline Legacy Time‑division Multiplexing(tdm) And/or Voice Over Internet Protocol(voip) Networks, Commercial Wireline (housing, On-base Contractors, Vendors, Etc.), And Commercial Wireless (mobile Phone) Sources. The Ng-911 Ch Solution Shall Include An Integrated Automatic Location Information (ali) Database To Provide Location Information For Calls Originating From Legacy Phones. The Ng-911 And Cad Systems Shall Be Integrated In Compliance With The Current Version Of The Nena Emergency Incident Data Object (eido) Standards (sta-021 And Sta-024). the Ng-911 Ch Solution Shall Be Tested And Approved By The Joint Interoperability Test Command (jitc) And On The Jitc Approved Product List (apl). System Redundancy, As Shown In The Jitc System Under Test Diagrams, Shall Have No Single Point Of Failure And Shall Provide Automatic Failover In The Event Of A Server Or Network Failure With No Loss Of Active Calls. The Army Anticipates Initially Fielding On Premise Ng-911 Chss Until The Technology Matures And Dod-approved Cloud-hosted Solutions Become Available From Industry. the Ng-911 Ch Solution Shall Support Calls Routed From Commercial (non-government) Sources Via Legacy 9-1-1 Selective Routers, Based On The Associated Existing Emergency Service Number(esn), Or Geospatially Routed Session Initiation Protocol (sip) Based Calls Via An Internet Protocol(ip) Based Emergency Services Ip Network(esinet) To Automatically Deliver 9-1-1 Calls To The Designated Army Psap. Theng-911 Ch Solution Shall Be Capable Of Interoperating With Other Dod, Federal, State, Local, Tribal, And Territorial E9-1-1 Or Ng-911 Psaps To Support Call Transfers And Conferencing, With Location Data, Between Psaps. the Cad Solution Is To Be Deployed As A Cloud Or Other Commercial Data Center-hosted Solution That Is Centrally Managed And Fully Redundant With No Single Points Of Failure. The Contractor Shall Provide Dedicated, Redundant Commercial Ip Circuits, With Backup Connections Leveraging The National First Responder Broadband Long‑term Evolution(lte) Wireless Network First Responder Broadband Network(frbn) Commonly Known As First Responder Network Authority(firstnet). the Cad System Shall Support Legacy Interfaces To Ancillary Sub-systems Local To Individual Installations. These Sub-systems Include Firestation Alerting Systems, Fire And Intrusion Alarm Central Monitoring Systems, Headset Arbitration Between Ng-911 And Radio Consoles, Vehicle And Personnel Location Information, Mobile Cad Applications, And Fire And Le Event/incident Records Reporting Systems. Applicable Interfaces May Differ By Army Installation. Examples Include But Are Not Limited To, Serial (rs-232, 422, 485), Analog, Contact Closure, Ip, Or Proprietary And May Involve Vendor-unique Application Programming Interfaces (apis). the Cad System Shall Provide An Integrated Gis-based Mapping Element. The Cad System Shall Provide Event Creation/updates, Event/run Cards, Event Closeout, Police/fire/ems Dispatch Protocols, Incident And Operational Reports, Database Updating, And Receiving Populating All 9-1-1 Caller Data To Include Calling Party Number(cpn) And Calling Device Location Data. the Contractor Shall Provide All Personnel, Infrastructure, Equipment, Supplies, Facilities, Transportation, Tools, Materials, Supervision, And Other Items Necessary For System Installation, Integration, Implementation, Testing, System Operator Training, And System Warranty And Support For The Cad, Ng-911 Ch Solution And Ng-911 Lis Systems. the Cad System Shall Have An Approved Federal Risk And Authorization Management Program(fedramp) Assessor, 3rd Party Assessment Organization(3pao), To Assess Its Cadsoftware Suite And Network Hosting Infrastructure To Ensure They Meet Impact Level 4(il-4) Requirements. The Contractor Shall Meet All Other Commercial Cloud Requirements As Listed In The Defense Information Systems Agency’s (disa’s) Cloud Computing Security Requirements Guide (srg). The Contractor Shall Meet All The Disa Requirements For A Provisional ‑ Authorization To Operate(p‑ato). the Ng-911 Lis Solution Shall Be An On‑premise Architecture, Co-located With Applicable Regional Or Local Session Controllers, Providing An Liscapability With Ip Network Discovery Of Location Changes To Voip/sip End-user Devices. The Ng-911 Lis Solution Shall Be Jitc Tested And Approved And On The Jitc Apl. requested Information please Provide A Response To The Government Per The Below Submission Requirements On The Following Questions To Encourage Competition And Exchange Of Information. Vendors Should Identify Past (limit To Five (5) Years) Or Current Contracts That Your Company Has Been Either Prime Or Subcontractor Associated With Fielding Ng-911 Chs, Cad, And/or Lis Solutions On Dod Installations. Use The Following As Guidelines For The Responses. brief Descriptions Of Contract Or Task Order Projects Your Company Has Successfully Supported Which Demonstrate The Number Of Systems Implemented And Breakout By Capability Set. ng-911. cad. lis. other Relevant Capabilities. size Of The Systems. number Call Taker/dispatch Consoles At A Given Customer. If Relevant, List Multiple Projects/customers. psap Annual 9-1-1 Call Volume At A Given Customer. describe Any Challenges Faced And How Were They Resolved. Since This Rfi Covers Three Capabilities (cad, Ng9-1-1, Lis), Challenges Would Include Identified System Interoperability Dependencies, Government Dependencies/infrastructure/policies That Need To Be In Place Before Any Fielding Efforts, Cyber Constraints, Cloud Hosting Constraints, Etc. describe Any Technical, Logistic, And Programmatic Risks Your Company Foresees In Executing The Technology Changes Taking Place In The 9-1-1, Cad, And/or Lis Industry. were The Capabilities Implemented Commercial Off The Shelf (cots) Solutions? If So, What Was The Result (e.g., In Terms Of Schedule, Resource, Risk)? describe Your Company’s Experience Interfacing To 3rd Party, Ancillary Sub-systems. is Your Company The Original Equipment Manufacturer (oem) For Any Or All The Solutions Implemented? If Not, Please Provide A Brief Description Of Existing Teaming Arrangements That You Have To Deliver Solutions. which Dod Component(s) Issued The Project Requirement/solicitation And Subsequent Contract Award(s) was Your Company The Prime Or Sub-contractor? were Contract(s) Firm Fixed Price Or Cost Plus? were Contract(s) Lowest Price, Technically Acceptable (lpta) Or Best Value? how Many Ng911/cad Installs Can Be Completed In A Calendar Year? what Information And/or Documents Are Missing That Would Otherwise Allow Your Company To Submit A Proposal? will Your Company Propose On This Effort? Yes, Or No? a. If Yes, Please Indicate Your Business Type (for Example, Small Business, Large Business, Small, Disadvantaged Business…etc.). b. If A Small Business, Please Indicate If Your Company Would Be Capable And Intend For At Least 50 Percent Of The Cost Of Performance Incurred For Personnel To Be Expended For Employees Of Your Company (see Far 52.219-14). submission Instructions: any Information Considered By The Responder To Be Proprietary Shall Be Marked As Proprietary. None Of The Information Provided Shall Contain Any Classified Material Or Classification Markings. No Telephone Requests Or Questions Will Be Accepted. All Responses To This Rfi Shall Only Be Submitted In Writing To Army Contracting Command-aberdeen Proving Ground (acc-apg), Addressed To The Following: Contracting Officer, Katia.lacoste.civ@army.mil And Contract Specialist, Walker.d.bazemore.civ@army.mil. Responses Shall Be Received No Later Than Close Of Business (cob) On 07 Feb 2025. All Email Transmittals Shall Be Contained In A Message Less Than 10mb In Size. Page Count Shall Not Exceed Five (5) Pages For This Rfi. this Request Is Issued To Develop A Viable Rfp That Will Best Communicate The Government's Requirements To Industry Through This Exchange Of Information. Responses To This Request Are Voluntary And Will Not Affect Any Contractor's Ability To Submit A Proposal If, Or When, An Rfp Is Released. The Requested Information Is For Planning Purposes Only And Does Not Constitute A Commitment, Implied Or Otherwise, That A Procurement Action Will Be Issued. no Entitlement To Payment By The Government Of Direct Or Indirect Costs Or Charges Will Arise As A Result Of The Submission Of Information In Response To This Request. Proprietary Information Shall Not Be Submitted. The Government Shall Not Be Liable For Or Suffer Any Consequential Damages For Any Improperly Identified Proprietary Information.

Details: Description Invitation To Bid For The Supply, Delivery, Subscription, Installation, And Configuration Of Various Ict Equipment And Network Softwares 1. The Department Of Agriculture - Regional Field Office 1 (da-rfo 1), Through The Gaa Fy 2025 Intends To Apply The Sum Of Sixteen Million Four Hundred Thirty-two Thousand Pesos (php16,432,000.00) With Project Identification Number Da-rfo 1-2025-goods-032 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Each Lot, To Wit: Project Title Abc (php) Lot 1: Supply And Delivery Of Various Ict Equipment 7,912,000.00 Lot 2: Supply, Delivery And Subscription Of Various Ict Software 2,900,000.00 Lot 3: Supply, Delivery, Installation And Configuration Of Various Ict Network Equipment 4,620,000.00 Lot 4: Supply, Delivery, Installation And Configuration Of 100-port Data And Voice Structured Cabling With Fiber Optic Cable Backbones 1,000,000.00 Total 16,432,000.00 Bids Received In Excess Of The Abc Shall Be Automatically Rejected At The Bid Opening. 2. The Da-rfo 1 Now Invites Bids For The Above-mentioned Procurement Project With The Following Details And Minimum Specifications, To Wit: Lot No. Particulars/descriptions Quantity Unit Cost Total Cost 1 Supply And Delivery Of Ict Equipment For Office Productivity Of Da-rfo 1 Employees 1 Lot 7,912,000.00 7,912,000.00 1) Laptop (high End, Branded) Processor: 13th Gen, 10 Cores, 16 Threads, 24mb Smart Cache, Up To 4.90 Ghz Max Turbo Frequency, 45w Base Power, Maximum Turbopower 105w Display: 15.6inch Fhd (1920x1080), 144hz, Ips-level Memory: 16gb Ddr5-5200 Max 64gb 2 Slots Storage: 1tb M.2 Ssd Slot (nvme Pcie Gen4) Graphics: 4608 Cuda Cores With Boost Clock 1230 - 2175 Mhz, 8gb Gddr6 Webcam: Hd Type (30fps@720p) Communication: Gb Lan 802.11 Ax Wi-fi 6 + Bluetooth V5.2 1x Type-c (usb3.2 Gen1 / Dp) 2x Type-a Usb3.2 Gen1 1x Type-a Usb2.0 Battery: 3-cell 53.5 Battery (whr) Ac Adapter: 200w Adapter Operating System: Licensed Windows 11 4 Units 2) Desktop Computer (high End, Branded) Lga1700 14th Generation Processor Family 20 Mb L3 Cache, 10 Cores, 16 Threads 16gb Ddr4 3200 512gb Nvme Gen 4 Ssd + 1tb Hdd 7200rpm Dedicated 6gb Ddr6 Graphics Card With Wi-fi And Bluetooth With Wireless Keyboard And Mouse Combo With 23.8 Inches Monitor Native 1920 X 1080 With Licensed Windows 11 Os Installed 10 Units 3) Laptop (regular, Branded) 13th Generation Mobile Processor 16gb 4800mhz Ddr5 512 Gb Nvme Ssd 15.6" Full Hd Wireless Ieee 802.11 A/b/g/n+ac+ax Capable 2x Usb Gen 3.2 Ports 1x Usb 3.2 Type C Port Built-in Webcam And Microphone Rechargeable Built-in Li-ion Battery With Licensed Windows 11 Os Installed 19 Units 4) Desktop Computer (regular, Branded) Lga1700 14th Generation Processor Family 8 Gb Memory Ddr5 Memory 512 Gb Nvme Ssd Gen. 4 23.8 Inch Full Hd Native 1920 X 1080 With Mouse And Keyboard With Licensed Windows 11 Os Installed With Lan, Wifi And Bluetooth Vga/dvi-d, Hdmi Or Display Port 14 Units 5) Printer 3-in-1 W/ Adf, A3 Color Printer 800 Nozzles Black, 256 Nozzles Per Color (cmy) Can Print Up To A3+ Size Paper Wifi, Wifi Direct And Ethernet Connection 4800 X 2400 Dpi Hi-speed Usb 2.0 Connectivity Duplex Printing Capable, Up To A3 Scan And Copy Thru Adf Scan And Copy Thru Glass Bed Bi-directional Printing Up To 25 Ipm Printing Speed With Consumables 100-240v Voltage, 50-60hz Frequency 10 Units 6) Portable Printer Print Speed Up To 14ppm With Built-in Battery Colour Lcd Panel Wifi And Wifi Direct Connectivity Bi-directional/uni-directional Printing Hi-speed Usb 2.0 Connectivity 14 Units 7) Multi-function Printer (for Pvc Id Card) Friction Feed Pvc Id Card Printing Enabled Micropiezo Printhead Bi-directional Printing 1.5pl Minimum Ink Droplet Size Maximum Print Resolution Of 5760 X 1440 Dpi With Variable-sized Droplet Technology Usb 2.0 Connection Wireless Capable Esc/p-r, Esc/p Raster Language With Bundled Consumables With Additional 1 Set Extra Consumables 3 Units 8) Multi-function Printer Printer Type: Print, Scan, Copy And Fax Maximum Resolution: 4800 X 1200 Dpi Print Speeds Up To 15.5ipm For Black And 8.5ipm For Colour Auto-duplex Printing Adf Capability Ethernet & Wi-fi Direct Colour Touch Lcd Screen Usb 2.0 Connectivity 15 Units 9) 3-in-1 Network Printer/ Scanner/ Photocopier Printer Type: Print/copy/scan/fax Precisioncore Printhead Bi-directional Printing 4800 X 1200 Dpi Maximum Resolution 2-sided Printing Capable 600 X 600dpi Copy Resolution Friction Paper Feed Front And Rear Tray With Lcd Screen Network: Ethernet, Wi-fi Ieee 802.11b/g/n, Wi-fi Direct Usb 2.0 Connection Ac 220-240v 50-60hz Up To A3 And A3+ Paper Size Cassette Capacity Of 250 Sheets For A4 (80gsm) Rear Capacity Of 20 Sheets For A3+ (80gsm) Up To 5.0 Ipm Scan Speed @200dpi With Bundled Consumables With Additional 1 Extra Set Of Consumables With 1 Piece Maintenance Box 10 Units 10) Dot Matrix Printer Impact Dot Matrix 9-pin Wide Carriage Up To 496cpi Prints Up To 6-part Forms 15,000 Power On Hours Mtbf Usb 2.0, Bi-directional Parallel Supported Bi-direction With Logic Seeking 200 Million Strokes/wire Printhead Life 2 Units 11) Flatbed Scanner Minimum Technical Specifications: Colour Scanner A4 Sheet-fed, 3-pass Duplex Scanner Led Light Source 1,200 X1,200 Dpi Output Resolution 215.9 X 3,048 Mm Maximum Document Size Supports 50 Gsm – 120 Gsm Paper Thickness 50 Sheets Adf Capacity Scan Speed Up To 25ppm/10ipm (300 Dpi) 24 Units 12) Portable Document Scanner A4 Sheet-fed, Simplex Colour Scanner Optical Resolution: 600 X 600 Dpi Output Resolution: 50 – 1,200 Dpi 216 X 1,828.8 Mm Maximum Document Size Contact Image Sensors (cis) Compact Size And Footprint Powered Via Usb, Ac Adapter Or Built-in Battery Scan Speed Up To 4.0sec Per Sheet (on Battery) Usb 2.0, Wi-fi And Wi-fi A/p Mode Connectivity 20 Units 13) Projector (indoor) Native Resolution Full Hd (1080p) Large Screen Projection Up To 391" 3000 Lumens Of Colour And White Brightness Comes With Android Tv™2 Dongle And Chromecast Built-in™ 5w Speaker (with Enclosure) Life (normal / Eco): 6,000 / 12,000 Hours (normal / Eco) F-number: 1.44 Focal Length: 16.4mm Zoom Ratio: 1.0 – 1.35 (digital Zoom) Throw Ratio: 1.19 – 1.61 Usb Type A: 1 (for 2a Power Supply, Firmware Update And Copy Osd Settings) Usb Type B: 1 (for Firmware Update And Copy Osd Settings) Hdmi: 1 (hdcp 1.4) 10 Units 14) Dslr Camera 24.2mp Aps-c Cmos Sensor Dual Pixel Cmos Af Ii 4k30 Video, 4k60 With Crop; Hdr-pq 23 Fps E. Shutter, 15 Fps Mech. Shutter 2.36m-dot Oled Evf 1.04m-dot Vari-angle Touchscreen Lcd Multi-function Shoe, Wi-fi And Bluetooth 18-45mm F/4.5-6.3 Is Stm Lens Lithium-ion Battery Pack Charger For Battery Pack 8 Units 15) Portable Audio System (branded) Digital Wireless Microphone Included Output Power: At Least 1100 Watts 30hz-20khz (-6db) Dynamic Frequency Range With 3.5mm Audio Cable Input Bluetooth Connection Usb Playback Guitar And Microphone Input True Wireless Stereo Using Bluetooth Connection With Rca Output Microphone Specifications: Frequency: 2404 - 2478mhz Encryption: Aes - 128 Working Range: 30m (100ft) Latency: < 12ms Frequency / Channel Selection: Adaptive Channel Selection Frequency Response: 50hz - 15khz Dynamic Range: 100db@ 1k Hz Signal -to -noise: 59dba Thd: < 1% @ 94db Spl, 200 - 10khz Microphone Rechargeable Battery: 600mah, 3.7v Li-ion Battery Dongle Battery: 700mah 3.7v Li-ion Battery Playtime Of Microphone: Up To 20 Hours Playtime Of Dongle: Up To 12 Hours Microphone Battery Charge Time: < 2.5h In Off Mode Dongle Battery Charge Time: < 2.5h In Off Mode Microphone Head: 16mm Ecm Transmitting Power: < 10dbm Receiver Maximum Output Level: < 1v Rms 6 Units 16) Handheld Gps Receiver 2.2" Transflective, 65k Color Tft Display Type 240 X 320 Pixels Display Resolution 25 Hrs Battery Life Ipx7 Water Rating High-sensitivity Receiver 2 Aa Nimh Or Lithium Rechargeable Batteries And Charger Included 30 Units 2 Supply, Delivery And Subscription To Various Ict Software 1 Lot 2,900,000.00 2,900,000.00 1) Graphic Design Platform 1tb Of Cloud Storage 1000 Brand Kits 100m+ Photos, Videos, Graphics, Audio Ai-generated Writing And Designs Unlimited Premium Templates Ai Admin Controls Edit, Comment, And Collaborate In Real-time With Online Customer Support 3-year Subscription *1 Account = 3 Users 5 Units 2) Cad Modeling Software Civil-infrastructure/engineering Design And Documentation Software Supports Computer-aided Design And Building Information Modeling Site And Survey Workflows Drainage Design And Analysis Plan Production And Documentation Intersection Design Corridor, Geotechnical And Terrain Modeling Commercial New Single User With Electronic-license Delivery (eld) 1 Year Subscription 2 Units 3) Cad And Drafting Software With Specialized Toolsets Commercial New Single User 2d Crafting, Drawing & Annotation 3d Modeling & Visualization Architecture, Mechanical, Map 3d, Electrical, Plant 3d And Raster Design Toolsets Commercial New Single User With Electronic-license Delivery (eld) 3 Year Subscription 2 Units 4) Cad And Drafting Software With Specialized Toolsets Commercial New Single User 2d Crafting, Drawing & Annotation 3d Modeling & Visualization Architecture, Mechanical, Map 3d, Electrical, Plant 3d And Raster Design Toolsets Commercial New Single User With Electronic-license Delivery (eld) 1 Year Subscription 2 Units 5) Office Productivity Software On Premise - Open License Graphical User Interface/keyboard Driven Menu System Support In Inserting And Editing 3d Models Support To Scalable Vector Graphics (svg) With Filters Live Preview While Formatting With Built-in Language Translator Support For Touch-enabled Devices, Digital Pens And Mouse For Drawing Shapes, Writing Out Complex Math Problems And Highlighting Text. With Accessibility Checker With Support For International Standards 45 Units 3 Supply, Delivery, Installation And Configuration Of Ict Network Equipment Of Da-rfo 1 1 Lot 4,620,000.00 4,620,000.00 1) Network Firewall Subscription At Least 3yrs Throughput Ngfw, Ips & Threat Protection: 1.6, 2.6 & 1 Gbps Concurrent Ssl-vpn Users: 500 2.2 Gbps Application Control Throughput Capwap Throughput (http 64k): 15gbps Heat Dissipation: At Least 100.6 Btu/h 80plus Compliant Power Supply Efficiency Rating Ports: 2 Ge Rj45 Wan, 4 Ge Rj45 Or Sfp Shared Ports, 1 Console And Usb Port Concurrent Tcp Sessions: 1.5million 10,000 Firewall Policies Throughput Ipsec Vpn: 11.5 Gbps Compliance Fcc Part 15b, Class A, Ce, Rcm, Vcci,ul/cul, Cb, Bsmi Ac Power Supply 100–240v Ac, 50/60 Hz Form Factor (supports Eia/non-eia Standards) Rack Mount, 1 Ru With Complete Accessories & Compatible With Existing Network Setup. 1 Unit 2) Network Switch (access) 10/1g Uplink Ports Forwarding And Switching Rate: 261.9 Mbps & 176 Gbps Per Hour Mean Time Between Failures: At Least 503,400 Jumbo Frames Capacity: 9198 Bytes Flash And Dram: 4gb And 2 Gb Entries Of Flexible Netflow: 16,000 Flows On 24 Or 48 Port Gigabit Ethernet Models Bandwidth Stacking: At Least 80 Gbps Mac Addresses Total And Ipv4 Routes: At Least 16,000 And 11,000 Routing Entries For Ipv4 & Ipv6: 3,000 & 1,500 Qos Scale & Acl Entries: 1000 With Complete Accessories & Compatible With Existing Devices. 1 Unit 3) Wireless Lan Controller (bundled With 6-ap & Licenses) Fixed Service Port: Auto-negotiation 10/100/1000base-t, Auto Mdi/mdix Crossover Standard Rj45 & Usb Port Management Port 40w Max. Power Consumption 200,000 Hours Mean Time Between Failure (mtbf) At The Standard Temperature 2048 Maximum Number Of Configurable Access Points Default Number Of Manageable Access Point Of 32 448 Maximum Number Of Manageable Access Point Wlan Service: 2048 Maximum Wlan Id At Least 32,768 Mac Address Entries 4096 Of Virtual Lans Ipv4 Address Pools: 2,000 Ipv4 Addresses: 24,576 Ipv6 Address Pools: 256 Ipv6 Addresses: 2,048 Ieee 802.11 Protocols: 802.11, 802.11b, 802.11a, 802.11g, 802.11d, 802.11h, 802.11w, 802.11k, 802.11v, 802.11r, 802.11i, 802.11e, 802.11n, 802.11ac, And 802.11ax Ieee 802.11 Security And Encryption: Multi-ssid Mode,ssid Hiding Ieee 802.11i-compliant Psk Authentication, Wpa And Wpa2,wpa3: Wpa3-personal (sae), Wpa3-enterprise (ccmp, 128-bit), And Wpa3-enterprise (gcmp, 192-bit),wep (wep/wep128), Tkip, Ccmp, Anti-arp Spoofing User Access Management: Console Port Login, Telnet Login, Ssh Login, And Ftp Upload Maximum Number Of Stas Supported By The Built-in Portal Server:1,500 Number Of Acl Entries:65,536 Entries With Six (6) Compatible Wireless Access Point With Six (6) Licenses Included Bundled With Training And Certification With Complete Accessories. 1 Unit 4) Network Attached Storage (nas) 64 Bit Cpu Architecture Cpu Frequency: 2.6 / 3.1 Ghz System Memory 2gb Ddr4 Ecc Drive Bays: At Least 4 Compatible Drive Type: 3.5" Sata Hdd & 2.5 Sata Ssd External Ports: 2 Rj-45 1 Gbe Lan Ports, 1 Usb 3.2 Gen 1 Port Pcie Expansion: 1 X Gen3 X 2 Network Upgrade Slot System Fan: 40mm X 40mm X 3pcs 28.5 Db(a) Noise Level Power Supply Unit : 100 Watts Power Consumption: 37.93 Watts (access), 13.43 Watts (hdd Hibernation) Rohs Compliant Bundled With At Least 4 Hdd (16tb) With Complete Required Accessories 2 Units 5) Ups 10kva (rack-mounted) Capacity: 10kva Rackmounted With Battery Input: Voltage: 200-240v +/- 10% Voltage Range: 176-3000v +/- 10% (full Load) Frequency: 56hz - 64hz Battery: 16 X 12v/9ah Output Voltage: 220-240v +/- 10% Frequency: 50hz-60hz +/- 5% Transfer Time: 0 (ac To Battery), 0ms (inverse To Bypass) True Double Conversion Microprocessor Control Technology Ensures High Reliability Input Power Factor Correction Output Power Factor 0.8 Waveform (batt Mode): Pure Sine Wave With Complete Accessories And Warranty. 4 Units 6) Wireless Access Point Max Throughput Up To 400mbps At 2.4g, Up To 867 Mbps At 5g 1.267 Gbps Ofdm: Bpsk@6/9mbps, Qpsk@12/18mbps, 16-qam@24mbps, 64-qam@48/54mbps Protocol: Concurrent 802.11ac Wave2, Wave1, 802.11a/b/g/n Spatial Streams: 2.4g 2x2mimo 5g 2x2mimo Antenna: Internal Antennas（2.4g: 2dbi，5g: 2dbi） Operating Bands: 802.11b/g/n: 2.4g ~ 2.4835ghz, 802.11a/n/ac: 5g：5.150～5.250ghz，5.725～5.850ghz 11b: -91dbm (1mbps), -88dbm (5mbps), -85dbm (11mbps) 11a/g: -89dbm (6mbps), -80dbm (24mbps), -76dbm (36mbps), -71dbm (54mbps) 11n: -83dbm@mcs0, -65dbm@mcs7, -83dbm@mcs8, -65dbm@mcs15 11ac Ht20: -83dbm (mcs0), -57dbm (mcs9) 11ac Ht40: -79dbm (mcs0), -57dbm (mcs9) 20 Units 7) Unmanaged Switch Ports:16 X 10/100base-x Poe+ Ports, 2 X 10/100/1000base-t Ports With 2-port Gigabit Rackmount Poe Switch Layer Type: Unmanaged Switching Capacity:7.2 Gbps Forwarding Rate:5.36 Mpps Mac Address Table:8000 Fan: Fanless Port Surge:6kv 4 Units 8) Ups 1kva Available Capacity : 1kva / 600w Line Interactive Switching Ups 2 X 12v7ah Battery Input Power : 190~240va (50~60hz) Output Power : 220~230va (50~60hz) 24 Units 9) Drone (quadcopter) Gimbal:3-axis Flight Control System: Gnss Support Gps, Beidou, Galileo Maximum Operating Distance:9.3 Miles / 15 Km Battery Capacity:5000 Mah / 77 Wh Charging Temperature 41 To 104°f / 5 To 40°c Maximum Ascent Speed 17.9 Mph / 8 M/s Maximum Descent Speed 13.4 Mph / 6 M/s Maximum Wind Resistance 26.8 Mph / 12 M/s Flight Ceiling 3.7 Miles / 6000 M Image Sensor:4/3″-type Cmos Sensor Resolution Effective: 20 Megapixel (5280 X 3956) Focal Length: 24mm (35mm Equivalent) Field Of View: 84° Maximum Aperture: F/2.8 Minimum Aperture: F/11 Minimum Focus Distance:3.3′/1 M Rotor Configuration: 4 Operating Temperature:14 To 104°f/-10 To 40°c With Complete Accessories, Controller Device, Bag And Extra Batteries And Propeller. Bundled With Formal Drone Pilot And Safety Training, Drone Pilot License & Rpas Certifications Acquisition. 1 Unit 4 100-port Data And Voice Structured Cabling With Fiber Optic Cable Backbones 1 Lot 1,000,000.00 1,000,000.00 Managed Switch Bandwidth Stacking: At Least 80 Gbps Entries Of Flexible Netflow: 32,000 On 24 Or 48 Port Multigigabit Models Stacking Switch Capacity & Forwarding Rate: 256 Gbps & 190 Mbps Jumbo Frames Capacity: 9198 Bytes Flash And Dram: 4gb And 2 Gb Forwarding And Switching: At Least 130.95 Mbps And 176 Gbps Per Hour Mean Time Between Failures: At Least 346,270 Mac Addresses Total And Ipv4 Routes: At Least 16,000 And 11,000 Routing Entries For Ipv4 & Ipv6: 3,000 & 1,500 Sfp Transceiver Module Hot Pluggable Sfp Msa Compliant To Maximize Uptime And Simplify Maintenance Modal Bandwidth Min :400 At Least 1804 Ft. Operating Distance Stackwise Cables Support 16 Gbps Speeds In Both Directions, Yielding A Traffic Total Of 32 Gbps Bandwidth Bidirectionally Cable Length:1.6 Ft Conductor: Copper Network Server Rack Cabinet Minimum Technical Specifications: Capacity: 22u With Exhaust Fans And Power Distribution Cables, I/o Ports And Accessories 1 Lot Roughing-in Materials For Horizontal And Backbone Distribution 1 Lot Roughing-in Materials For Fiber Backbone Distribution 1 Lot Mobilization / Demobilization 1 Lot Testing And Commissioning 1 Lot Preparation, Documentation Of As-built Plan Drawings And Turn-over Of Network Design And Diagram 1 Lot Cables, I/o Ports And Accessories 1 Lot Grand Total 16,432,000.00 All Equipment With 1 Year Warranty On Parts & Services. Drop Off Point: Da Rfo I, City Of San Fernando, La Union Delivery Schedule: 90 Calendar Days From Receipt Of Notice To Proceed (ntp). Delivery Of The Goods Is Required Within 90 Calendar Days Upon Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Two Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Prospective Bidders May Obtain Further Information From And Inspect The Bidding Documents At The Address Given Below During Office Hours From 8:00 Am To 5:00 Pm, Monday To Friday. Department Of Agriculture Regional Field Office 1 Aguila Rd., Sevilla, City Of San Fernando, La Union 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From January 7-27, 2025 From The Address Given And Websites Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Following Amounts: Project Title Bid Docs Fee Lot 1: Supply And Delivery Of Various Ict Equipment 10,000.00 Lot 2: Supply, Delivery And Subscription Of Various Ict Software 5,000.00 Lot 3: Supply, Delivery, Installation And Configuration Of Various Ict Network Equipment 5,000.00 Lot 4: Supply, Delivery, Installation And Configuration Of 100-port Data And Voice Structured Cabling With Fiber Optic Cable Backbones 1,000.00 The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, By Facsimile, Or Through Electronic Means. Note: For Lot Procurement, The Maximum Fee For The Bidding Documents For Each Lot Shall Be Based On Its Abc, In Accordance With The Guidelines Issued By The Gppb; Provided That The Total Fees For The Bidding Documents Of All Lots Shall Not Exceed The Maximum Fee Prescribed In The Guidelines For The Sum Of The Abc Of All Lots. 6. The Da-rfo 1 Will Hold A Pre-bid Conference On 14 January 2025, 1:00 Pm At Da-rfo 1, 5th Floor Conference Room, Aguila Road, Sevilla, City Of San Fernando, La Union, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Above On Or Before 27 January 2025, 1:00 Pm. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On 27 January 2025, 1:00 Pm At Da-rfo 1, 5th Floor Conference Room, Aguila Road, Sevilla, City Of San Fernando, La Union. Bids Will Be Opened In The Presence Of The Bidders Or Their Authorized Representatives. 10. Additional Instructions To Bidders: A. The Bidders Or Their Duly Authorized Representatives May Attend The Bid Opening; B. In Case A Representative Will Be Attending The Bid Opening, A Special Power Of Attorney (spa), Secretary’s Certificate, Board Resolution Or Any Other Forms Of Authorization (notarized), As The Case May Be, Together With The Company-issued Identification Card Or Any Valid Id Must Be Presented Upon Submission Of The Bid Proposal At The Bac Secretariat. The Name/title Of The Project Must Be Indicated In The Authorization Or Spa. C. Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. Bidders Shall Submit Their Bids With Proper Index Tabbing Using The Forms Specified In The Bidding Documents In Two (2) Separate Sealed Bid Envelopes, And Which Shall Be Submitted Simultaneously; The First Component Which Is The Technical Eligibility Requirements Must Be Soft-bound, Marked With The Name Of The Contract And Its Ib No., Name And Address Of The Bidder, And Enclosed In An Envelope, Sealed With Signature And Marked With The Name Of The Contract, Name And Address Of The Bidder, Addressed To The Bids And Awards Committee (bac) Da Rfo-1 City Of San Fernando, La Union, The Specific Identification No. And The Warning “do Not Open Before…” The Date And Time For The Bid Opening. The Second Component Being The Financial Eligibility Requirements Can Be Fastened In A Folder, Marked With The Name Of The Contract And Its Ib No., Name And Address Of The Bidder, And Enclosed In An Envelope, Sealed With Signature And Marked With The Name Of The Contract, Name And Address Of The Bidder, Addressed To The Bids And Awards Committee (bac) Da Rfo-1 City Of San Fernando, La Union, The Specific Identification No. And The Warning “do Not Open Before…” The Date And Time For The Bid Opening. The Technical And Financial Requirement Each In Separate Envelopes, Shall Be Enclosed In A Mother Envelope With The Same Sealing And Markings. Non-compliance With Index Tabbings Shall Not Be A Ground For Outright Disqualification Or Declaration Of Ineligibility. The Improper Index Tabbings Must Be Duly Acknowledged By The Bidder/representative And Be Subject To The Bid Evaluation And Post-qualification Of The Technical Working Group (twg) As To Their Substance. D. All Documents In The Financial Requirements Envelope Must Be Duly Signed And/or Initialed By The Bidder/authorized Representative On Each And Every Page Thereof. 11. The Da-rfo 1 Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And Section 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Dennis I. Tactac, Abe Chairperson, Bids And Awards Committee Department Of Agriculture - Regional Field Office 1 Aguila Road, Sevilla, City Of San Fernando, La Union Tel. No. :(072) 242/1045-46, Ext. 07 E-mail Add: Bacsec@ilocos.da.gov.ph 13. For Downloading Of Bidding Documents, You May Visit The Following Websites: Da-rfo 1 Website: Https://ilocos.da.gov.ph/ Philgeps Website: Https://www.philgeps.gov.ph/ January 6, 2025 Approved: (sgd.) Gilbert D. Rabara, Dvm Vice-chairperson, Bids And Awards Committee Invitation To Bid Identification No. Da-rfo 1-2025-goods-032

Details: Acquisition of Second Life IT Supplies Category 1: Acquisition of Refurbished Office Computers (desktops, laptops, stations, etc.) • Category 2: Acquisition of Refurbished Network Equipment (switches, routers, WiFi terminals, etc.) • Category 3: Acquisition of Telephones Refurbished Ip • Category 4: Acquisition of Refurbished Smartphones • Category 5: Acquisition of Refurbished Tablets • Category 6: Acquisition of Refurbished Monitors • Category 7: Acquisition of Projection Equipment • Category 8: Acquisition of Computer Supplies • Category 9: Repair • Category 10: Purchase and reconditioning of fleet

Details: Purchase of a Confocal and Multiphoton Microscope for Calcium Imaging on Insects as Part of the Erc Olfatask Project No. 101161791 for the Egce Laboratory of the University of Paris Saclay The purpose of this contract is to purchase this equipment to enable functional imaging recordings on insects in vivo. It therefore includes the purchase of a multiphoton microscope equipped with a scan head and various detectors, allowing measurements to be carried out in confocal microscopy. The contract also includes the purchase of the computer controlling the elements of the microscope, the anti-vibration table on which the system is placed, as well as a visible laser bench and an infrared laser.

Details: Description Invitation To Bid For The Procurement Of Clinical Chemistry Reagents (tie-up Basis) With Ib No. 2025-02-04 (09) 1. The Adela Serra Ty Memorial Medical Center, Using A Single Year Framework Agreement, Through The Astmmc Fund Intends To Apply The Sum Fifteen Million One Hundred Forty Two Thousand Pesos Only [php 15,142,000.00], Being The Abc To Payments Under The Contract For Each Item. Bids Received In Excess Of The Abc Shall Be Automatically Rejected. 2. The Adela Serra Ty Memorial Medical Center Now Invites Bids For The Procurement Of Clinical Chemistry Reagents (tie-up Basis). Delivery Of The Goods Is Required Within 15 Calendar Days After Issuance Of A Call-off. Bidders Should Have Completed, Within 5 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non- Discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Adela Serra Ty Memorial Medical Center And Inspect The Bidding Documents At The Address Given Below During 8:00am To 5:00pm, Monday Thru Friday. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 15, 2025 To February 4, 2025 From The Given Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents In The Amount Of Twenty Five Thousand Pesos Only [php 25,000.00]. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment In Person. 6. The Adela Serra Ty Memorial Medical Center Will Hold A Pre-bid Conference On January 23, 2025; 11:00 Am At Bac Conference Room, Opd Bldg, Astmmc, Tandag City And Or Through Video Conferencing Or Webcasting Via Meet.google.com/rbu-snjw-vga Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, On Or Before 11:00 Am; February 4, 2025. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On 11:01 Am; February 4, 2025 At Bac Conference Room, Opd Bldg, Astmmc, Tandag City And Or Through Video Conferencing Or Webcasting Via Meet.google.com/rbu-snjw-vga Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Adela Serra Ty Memorial Medical Center Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Bac Office, 2nd Floor Opd Bldg. Astmmc, Tandag City, Sds, 8300 Tel No. 086-211-4306 Astmmcprocurement@gmail.com 12. For Downloading Of Bidding Documents, You May Visit: Philgeps.gov.ph January 15, 2025 Date Issued Dominador B. Toral, Rn, Md, Dpbohns Hbac Chairman Lot / Item Number Description Quantity Unit Unit Cost Total Delivered, Weeks/ Months Winning Bidder Responsibilities: > Must Provide And Install An Iso Certified, Fully Automated Chemistry Analyzer For Free Of Use. > Free Of Charge Technical Services Of Company Engineer Which Must Be Available And Responsive To Any Of The Problems Or Concerns Of The Machine 24/7, Conduct Regular Monthly Machine's Calibration And Preventive Maintenance. >in Case Of Breakdown, Prompt Replacement (not Later Than 48 Hrs. Upon Notice Of Breakdown) With Another Unit Of Machine Or Parts. > Free Of Charge Technical Services Of Company Engineer Which Must Be Available And Responsive To Any Of The Problems Or Concerns Of The Machine 24/7, Conduct Regular Monthly Machine's Calibration And Preventive Maintenance. >supplier Must Have A Warehouse Or Functional Service Center With Company Employed Qualified Technical Service Engineers. >supplier Must Possess A Certificate Of Exclusive Distributorship ( Ced ) For The Security Of The Laboratory's Uninterrupted Operation > Should Have At Least 2 Current Installations To Tertiary Laboratories Anywhere In The Philippines With The Same Offered Machine. > Machine Provided Must Be Lis Ready. > Supplier Must Shoulder The Two (2) Analyzer's Lis Connectivity Fee/charges With The Existing Astmmc Lis Provider. Please Refer Below For The Lis Connectivity Corresponding Charges To Be Paid Directly To Adela Serra Ty Memorial Medical Center Account. Lis Connectivity Charges/fees Contract Amount 16m To 20m 11m To 15m 6m To 10m 1m To 5m Below 1m 1st Fully Automated Analyzer 288,000.00 270,000.00 252,000.00 234,000.00 216,000.00 2nd And Succeeding Analyzer 160,000.00 150,000.00 140,000.00 130,000.00 120,000.00 Contract Amount 16m To 20m 11m To 15m 6m To 10m 1m To 5m Below 1m 1st Semi-automated Analyzer 192,000.00 180,000.00 168,000.00 156,000.00 144,000.00 2nd And Succeeding Analyzer 112,000.00 105,000.00 98,000.00 91,000.00 84,000.00 Contract Amount 16m To 20m 11m To 15m 6m To 10m 1m To 5m Below 1m 1st Poct Analyzer 128,000.00 120,000.00 112,000.00 104,000.00 96,000.00 2nd And Succeeding Analyzer 80,000.00 75,000.00 70,000.00 65,000.00 60,000.00 > Must Provide A Back- Up Machine With The Same Brand To Serve The Purpose, Aside From The Back-up Machine, The Supplier Must Shoulder Expenses Incurred For The Sending Out Of Samples To Other Laboratories Due To Machine Breakdown And Unresponsiveness Of Supplier. > National Reference Laboratory Result Of Eqas Must Be Excellent For The Past 2 Years. Machine Should Be Officially Enrolled Or Have Record At Qcnet.com. It Should Have Multiple Installation And Has Been Proven To Provide Satisfactory Laboratory Test Results. > Meet Laboratory Quality Objective Performance #1, The Turnaround Time (tat) To Release Result After 2 Hours And Can Run All Tests 24 Hours A Day, 7 Days A Week > Must Provide And Free Of Charge (foc): - All Consumables Needed For The Machine To Function - Controls (level I, Ii, Iii) & Calibrators - Computer Sets, Ups With More Than 3kva, Avr, Printer - Calibration & Preventive Maintenance - Any Parts Or Accessories Of Machine >install Own Water Tank For Water Source To Provide Adequate Uninterrpted Water Supply For The Machine To Consumption. Machine W/ Built In Water Filtration System To Provide Unlimited And Uninterrupted Distilled Water Supply For The Machine To Function. In Case That Built-in Water Station Cannot Serve Its Purpose, Distilled Water Can Be Provided By The Laboratory But Cost Incurred Shall Be Charged Against The Supplier And Supplier's Performance Will Be Affected During The Monthly Performance Evaluation Report By The End Users. > Quantity Of Reagents Must Be Delivered In A Quarterly Basis Or Staggered Scheme Or Upon The Request Of The End-user. > Payments Will Be Issued Per Delivery Of Reagents. > Reagents Delivered Must Be 18 Months From The Expiration Date, A Guarantee Letter Of Replacement May Be Issued For Less Than 18 Months Reagents And Supplies > A Framework Agreement For A 1-year Contract Shall Be Made. >machine Specifications Of Fully Automated Chemistry Analyzer: > Floor Type Machine >analytical Principle/system Description: Photometric/potentiometric/turbidimetric/clia/spectrophotometry >test Throughput Per Hour: 1000-1200 >sample Type For Analysis: Whole Blood/serum/plasma/csf Or Other Fluids/urine >sample Tube Size Used For Analysis: 13x100mm & 12x75mm >sample Capacity: At Least 60-150 Sample Positions >sample Volume 1.5-3.5 Ml >machine Water Requirements: With Machine For Water System Necessary To Its Operation >machine Quality Assurance: Autocalibration, Auto-qc, Auto Westgard Rules/levy Jennings Plotting Of Real Time Qc >machine Diagnostics System & Services: Online/remote Access/ With Color Touchscreen Monitor >machine Patient Data Storage: At Least 100,000 > Machine Must Be Brandnew Or Not Less Than 5 Years Old From The Manufacture Date >stat Samples Priority Placement/program >programmed With Automatic Sample Dilution >able To Detect Sample Clot & Bubbles >sample Transparency Measurement (hemolysis, Icteric & Lipemic) >remote Diagnostics Online Error >at Least 5 Or 6 Sigma Metrics Glucose (at Least 300 Tests) / Packaging 35 Cart/box/bottle/cassette 18,000.00 630,000.00 15 Calendar Days After Issuance Of A Call-off Total Cholesterol (at Least 300 Tests/cart) 30 Cart/box/bottle/cassette 18,000.00 540,000.00 15 Calendar Days After Issuance Of A Call-off Triglyceride (at Least 300 Tests/cart) 30 Cart/box/bottle/cassette 22,000.00 660,000.00 15 Calendar Days After Issuance Of A Call-off Hdl Direct (at Least 300 Tests/cart) 30 Cart/box/bottle/cassette 34,000.00 1,020,000.00 15 Calendar Days After Issuance Of A Call-off Creatinine (at Least 350 Tests/cart) 40 Cart/box/bottle/cassette 20,000.00 800,000.00 15 Calendar Days After Issuance Of A Call-off Bun (at Least 300 Tests/cart) 50 Cart/box/bottle/cassette 18,000.00 900,000.00 15 Calendar Days After Issuance Of A Call-off Bua (at Least 250 Tests/cart) 50 Cart/box/bottle/cassette 18,000.00 900,000.00 15 Calendar Days After Issuance Of A Call-off Sgpt (at Least 250 Tests/cart) 40 Cart/box/bottle/cassette 16,000.00 640,000.00 15 Calendar Days After Issuance Of A Call-off Sgot (at Least 250 Tests/cart) 60 Cart/box/bottle/cassette 16,000.00 960,000.00 15 Calendar Days After Issuance Of A Call-off Total Protein (at Least 350 Tests/cart) 10 Cart/box/bottle/cassette 16,000.00 160,000.00 15 Calendar Days After Issuance Of A Call-off Albumin (at Least 250 Tests/cart) 12 Cart/box/bottle/cassette 16,000.00 192,000.00 15 Calendar Days After Issuance Of A Call-off Total Bilirubin (at Least 350 Tests/cart) 10 Cart/box/bottle/cassette 18,000.00 180,000.00 15 Calendar Days After Issuance Of A Call-off Direct Bilirubin (at Least 200 Tests/cart) 10 Cart/box/bottle/cassette 18,000.00 180,000.00 15 Calendar Days After Issuance Of A Call-off Calcium (at Least 300 Tests/cart) 35 Cart/box/bottle/cassette 21,000.00 735,000.00 15 Calendar Days After Issuance Of A Call-off Magnesium (at Least 200 Tests/cart) 35 Cart/box/bottle/cassette 16,000.00 560,000.00 15 Calendar Days After Issuance Of A Call-off Lipase (at Least 100 Tests/cart) 10 Cart/box/bottle/cassette 30,000.00 300,000.00 15 Calendar Days After Issuance Of A Call-off Amylase (at Least 250 Tests/cart) 10 Cart/box/bottle/cassette 18,000.00 180,000.00 15 Calendar Days After Issuance Of A Call-off Alkaline Phosphatase (at Least 250 Tests/cart) 10 Cart/box/bottle/cassette 30,000.00 300,000.00 15 Calendar Days After Issuance Of A Call-off Lactate Dehydrogenase (at Least 250 Tests/cart) 10 Cart/box/bottle/cassette 30,000.00 300,000.00 15 Calendar Days After Issuance Of A Call-off Sodium, Potassium, Chloride Module (20,000 Tests/module) 2 Module 550,000.00 1,100,000.00 15 Calendar Days After Issuance Of A Call-off Reagent And Machine For Point-of-care For Electrolytes 1 Set 750,000.00 750,000.00 15 Calendar Days After Issuance Of A Call-off Serum C3 (100/box) 1 Box 100,000.00 100,000.00 15 Calendar Days After Issuance Of A Call-off Serum Phosphorus 100 Tests/box 5 Box 21,000.00 105,000.00 15 Calendar Days After Issuance Of A Call-off Subtotal 12,192,000.00 Lot 2 Winning Bidder Responsibilities: > Must Provide And Install An Iso Certified, Fully Automated Hba1c Analyzer For Free Of Use. >"if It's Not Brand New Machine, It Must Have Been Used For Not More Than Three (3) Years." Provide Certificate Of Machine Purchase And Any Proof From Its Usage. >should Have Atleast 2 Current Installations To Secondary Laboratories Anywhere In The Philippines With The Same Offered Machine. > Reagents, Controls, Calibrators And All Consumables Must Be Compatible With The Machine. > Service Engineer Must Be Knowledgeable Of Their Machine And Responds To Any Of Our Problems Or Concern Immediately. > Free Of Charge Technical Services Of Company Engineer Which Must Be Available And Responsive To Any Of The Problems Or Concerns Of The Machine 24/7, Conduct Regular Monthly Machine's Calibration And Preventive Maintenance. > Machine Provided Must Be Lis Ready. > Supplier Must Shoulder Connectivity Fee/charges For Lis Services And Coordinate With Astmmc Lis Provider For The Lis Connection. > In Case Of Breakdown, Prompt Replacement (not Later Than 48 Hrs Upon Notice Of Breakdown) With Another Unit Of Machine Or Parts. > Must Provide A Back-up Machine To Serve The Purpose, Aside From The Back-up Machine,supplier Must Shoulder Expenses Incurred For The Sending Out Of Samples To Other Laboratories Due To Machine Breakdown And Unresponsiveness Of Supplier. > Must Shoulder Expenses Incurred For The Sending Out Of Samples For Testing To Other Laboratories Due To Machine Breakdown And Unresponsiveness Of The Supplier. > Meet Laboratory Quality Objective Performance #1, The Turnaround Time (tat) To Release Result After 2 Hours And Can Run All Tests 24 Hours A Day, 7 Days A Week. > Must Provide And Free Of Charge (foc): - All Consumables Needed For The Machine To Function - Calibrators - Controls - Computer Sets, Ups, Avr, Printer - Calibration & Preventive Maintenance - Any Parts Or Accessories Of Machine - All Not Mentioned/others > Quantity Of Reagents Must Be Delivered Based On Nefa Or Notice To Execute Framework Agreement Or Staggered Scheme Or Upon The Request Of The End-user. > Payments Will Be Issued Per Delivery Of Reagents. > Reagents Delivered Must Be 18 Months From The Expiration Date, A Guarantee Letter Of Replacement May Be Issued For Less Than 18 Months Reagents And Supplies. > A Framework Agreement For A 1-year Contract Shall Be Made. Hence, Renewable Yearly After Evaluation, Deliberation And Recommendation Report From The End Users. Machine Specifications: > Principle: High Performance Liquid Chromatography (hplc) > Automatic System Start-up Checklist And Touch Screen Operation > One-step Cartridge Switching > Automatic Sample Barcode Reading > Onboard Monitoring > Lis Ready > Free Of Charge Technical Services Of Company Engineer Which Must Be Available And Responsive To Any Of The Problems Or Concerns Of The Machine 24/7, Conduct Regular Monthly Machine's Calibration And Preventive Maintenance. >supplier Must Have A Warehouse Or Functional Service Center With Company Employed Qualified Technical Service Engineers. >supplier Must Posses A Certificate Of Exclusive Distributorship ( Ced ) For The Security Of The Laboratory's Uninterrupted Operation > Should Have Atleast 2 Current Installations To Tertiary Laboratories Anywhere In The Philippines With The Same Offered Machine. > Machine Provided Must Be Lis Ready. > Supplier Must Shoulder The Two (2) Analyzer's Lis Connectivity Fee/charges With The Existing Astmmc Lis Provider. Please Refer Below For The Lis Connectivity Corresponding Charges To Be Paid Directly To Adela Serra Ty Memorial Medical Center Account. Lis Connectivity Charges/fees Contract Amount 16m To 20m 11m To 15m 6m To 10m 1m To 5m Below 1m 1st Fully Automated Analyzer 288,000.00 270,000.00 252,000.00 234,000.00 216,000.00 2nd And Succeeding Analyzer 160,000.00 150,000.00 140,000.00 130,000.00 120,000.00 Contract Amount 16m To 20m 11m To 15m 6m To 10m 1m To 5m Below 1m 1st Semi-automated Analyzer 192,000.00 180,000.00 168,000.00 156,000.00 144,000.00 2nd And Succeeding Analyzer 112,000.00 105,000.00 98,000.00 91,000.00 84,000.00 Contract Amount 16m To 20m 11m To 15m 6m To 10m 1m To 5m Below 1m 1st Poct Analyzer 128,000.00 120,000.00 112,000.00 104,000.00 96,000.00 2nd And Succeeding Analyzer 80,000.00 75,000.00 70,000.00 65,000.00 60,000.00 Hba1c (250 Tests/box) 30 Box 90,000.00 2,700,000.00 Subtotal 2,700,000.00 Lot 3 Winning Bidder Responsibilities: > Must Provide And Install Two (2) Units Of Iso Certified, Fully Automated Portable Ise Electrolyte Analyzer For Free Of Use That Can Be Usedsimultaneously. > "if It's Not Brand New Machine, It Must Have Been Used For Not More Than Three (3) Years." Provide Certificate Of Machine Purchase And Any Proof From Its Usage >should Have Atleast 2 Current Installations To Secondary Laboratories Anywhere In The Philippines With The Same Offered Machine. > Reagents, Controls, Calibrators And All Consumables Must Be Compatible With The Machine. > Service Engineer Must Be Knowledgeable Of Their Machine And Responds To Any Of Our Problems Or Concern Immediately. > Free Of Charge Technical Services Of Company Engineer Which Must Be Available And Responsive To Any Of The Problems Or Concerns Of The Machine 24/7, Conduct Regular Monthly Machine's Calibration And Preventive Maintenance. >supplier Must Have A Warehouse Or Functional Service Center With Company Employed Qualified Technical Service Engineers. >supplier Must Possess A Certificate Of Exclusive Distributorship ( Ced ) For The Security Of The Laboratory's Uninterrupted Operation > Should Have Atleast 2 Current Installations To Tertiary Laboratories Anywhere In The Philippines With The Same Offered Machine. > In Case Of Breakdown, Prompt Replacement (not Later Than 48 Hrs Upon Notice Of Breakdown) With Another Unit Of Machine Or Parts. > National Reference Laboratory Result Of Eqas Must Be Excellent For The Past 3 Years. Machine Should Be Officially Enrolled Or Have Record At Qcnet.com. It Should Have Multiple Installation And Has Been Proven To Provide Satisfactory Laboratory Test Results. > Meet Laboratory Quality Objective Performance #1, The Turnaround Time (tat) To Release Result After 2 Hours And Can Run All Tests 24 Hours A Day, 7 Days A Week. > Must Provide A Back-up Machine To Serve The Purpose, Aside From Back-up Machine The Supplier Must Shoulder Expenses Incurred For The Sending Out Of Samples To Other Laboratories Due To Machine Breakdown And Unresponsiveness Of Supplier. > Must Provide And Free Of Charge (foc): - All Consumables Needed For The Machine To Function - Daily Cleaning Kits - Controls - Calibrators - Ups, Avr, Printer - Any Parts Or Accessories Of Machine > Quantity Of Reagents Must Be Delivered In A Quarterly Basis Or Staggered Scheme Or Upon The Request Of The End-user. > Payments Will Be Issued Per Delivery Of Reagents. > Reagents Delivered Must Be 18 Months From The Expiration Date, A Guarantee Letter Of Replacement May Be Issued For Less Than 18 Months Reagents And Supplies. > A Framework Agreement For A 1-year Contract Shall Be Made. Machine Specifications: > Sample Type: Serum, Plasma Or Urine > Sample Size: 100 Ul Serum, 60 Ml Capillary > Principle: Direct Measurement Ion Selective Electrode (ise) > Automatic Or Un-demand Calibration, Automatic Probe Wiping > Simple And Easy To Use, Result Printed Automatically > Easy To Maintain. All Calibrants Contained In Convenient, Disposable Solution Packs, All Wastes Collected In Solution Pack, Disposable Electrodes Require No Maintenance.> Must Provide And Free Of Charge (foc): - All Consumables Needed For The Machine To Function - Daily Cleaning Kits - Controls - Calibrators - Ups, Avr, Printer - Any Parts Or Accessories Of Machine > Quantity Of Reagents Must Be Delivered In A Quarterly Basis Or Staggered Scheme Or Upon The Request Of The End-user. > Payments Will Be Issued Per Delivery Of Reagents. > Reagents Delivered Must Be 18 Months From The Expiration Date, A Guarantee Letter Of Replacement May Be Issued For Less Than 18 Months Reagents And Supplies. > A Framework Agreement For A 1-year Contract Shall Be Made. Machine Specifications: > Sample Type: Serum, Plasma Or Urine > Sample Size: 100 Ul Serum, 60 Ml Capillary > Principle: Direct Measurement Ion Selective Electrode (ise) > Automatic Or Un-demand Calibration, Automatic Probe Wiping > Simple And Easy To Use, Result Printed Automatically > Easy To Maintain. All Calibrants Contained In Convenient, Disposable Solution Packs, All Wastes Collected In Solution Pack, Disposable Electrodes Require No Maintenance. Ise Electrolytes (na+, K+, Cl-) Solution Packs (at Least 500 Tests/pack) 10 Pack 25,000.00 250,000.00 Subtotal 250,000.00 Total Amount 15,142,000.00 Purpose For Clinical Chemistry Section Use.

Details: Description Request For Quotation Rfq No. Svp 25-b-0018 Date January 21, 2025 Pr Reference 100-25-01-061 Philgeps Reference No. End-user Comelec Closing Date February 4, 2025 February 6, 2025 Bid Opening 1. Bac Office, Cabcabon, Bayawan City Designated Places Of Submission (bid Box Designated Locations) 2. Sidlakan Extension Office (dgte. City) Note: Please Attach The Following Documentary Requirements Together With This Rfq: 1. Mayor's / Business Permit 2. Philgeps Registration No: A. Philgeps Red Membership (for Svp, Shopping, Highly Technical Consultants ) B. Certificate Of Philgeps Registration (platinum Membership) (np- Two Failed Bidding) 3. Omnibus Sworn Statement Name Of Business: Address: Name Of Store: Business Permit No.: Tax Identification No.: Philgeps Reg. No.: The Local Government Unit Of Bayawan City, Through Its Bids And Awards Committee, Intends To Procure Goods/services As Enumerated In The Proposal Form. Please Submit Your Quotations/proposals Duly Signed By You Or Your Duly Authorized Representative Not Later Than The Closing Date For The Item(s) Described, Subject To The Terms And Conditions Provided At The Back Portion Of This Request For Quotation (rfq). A Copy Of Your Current Business Permit And Philgeps Certificate Or Registration Is Also Required To Be Submitted Along Withyour Quotation/proposal. Quotations May Be Submitted Manually, Or Through Facsimile Or Email At The Address And Contact Numbers Indicated Below. For Any Clarification, Please Contact The Bac Secretariat At Telephone Number (035) 430-0281 Local 1210/1212 Or Email Address At Bac.bayawan@gmail.com. Virginia D. Sadiasa Bac Chairperson Acknowledgement Receipt I/we Hereby Acknowledge Receipt Of This Request For Quotation (rfq), And Hereby Agree To The Terms And Conditions Set Therein. We Assume Responsibility To Deliver/submit Our Proposal On Or Before The Closing Date And Time At The Designated Bid Boxes; Otherwise, Lgu Bayawan City Can Consider Us Not Interested To Quote. (signature Over Printed Name / Date) Terms And Conditions 1 Bidders Shall Provide Correct And Accurate Information Required In This Form. Errors In Price Quotation Shall Be Exclusively The Supplier’s Responsibility. Any Interlineations, Erasures, Or Overwriting Shall Be Valid Only If They Are Signed Or Initiated By You Or Any Of Your Duly Authorized Representative/s. 2 Price Quotation/s, To Be Denominated In Philippine Peso Shall Include All Taxes, Duties, And/or Levies Payable. All Prices Offered Must Be Valid For A Period Of Thirty (30) Calendar Days From The Date Of Submission. 3 Quotations Exceeding The Approved Budget For The Contract (abc) Shall Be Rejected. Indicate In The Proposal The Brand, Model And Technical Specifications Of The Items Quoted; Otherwise, The Bid Will Be Rejected. Specifying The Country Of Origin, The Terms “generic”, “original”, And The Like Are Not Considered Brand Names. Indicate No Brand If The Item Quoted Is Generally Unbranded. 4 5 Alternative Bids Shall Be Rejected Outright. For This Purpose, Alternative Bid Is An Offer Made By A Bidder In Addition Or As A Substitute To Its Original Bid Which May Be Included As Part Of Its Original Bid Or Submitted Separately Therewith For Purposes Of Bidding. A Bid With Options Is Considered An Alternative Bid Regardless Of Whether Said Bid Proposal Is Contained In A Single Envelope Or Submitted In Two (2) Or More Separate Bid Envelopes. 6 Award Will Be Made To The Lowest Calculated And Responsive Bid (lcrb) – The Bid Determined, After Post-qualification, As Complying To The Eligibility And Bid Requirements. 7 Basis Of Evaluation For This Rfq: 8 Breaking Of Ties. A Non-discretionary Method Of Breaking Ties Will Be Used, I.e. Tossing Of Coin (for Two Bidders) Or Draw Lots (for Three Or More Bidders). 9 The City Of Bayawan Reserves The Right Not To Award Any Contract To A Bidder Having A Pending And Overdue Delivery Obligation To The City And Defaulted The Prescribed Delivery Period In Previous Award/s From The City Of Bayawan. 10 The Prescribed Delivery Period Is Within Thirty (30) Calendar Days, Unless Explicitly Indicated In The Proposal. Extension Of Delivery Period, If Granted, Shall In No Case Exceed The Original Delivery Term. Unless Otherwise Stated, The Default Place Of Delivery Is F.o.b. Bayawan City Warehouse, Cabcabon, Bayawan City. 11 Supplier/s Must Deliver The Items Awarded Within The Period Specified In The Purchase Order. Purchase Order Issued Shall Automatically Be Cancelled If No Delivery Is Made After Thirty (30) Calendar Days After Receipt Thereof, Without Prejudice To Legal Courses Of Action (e.g. Imposition Of Liquidated Damages, Suspension And Blacklisting) Provided In Republic Act 9184 And Its Irr. The Rescinded Contract May Be Re-awarded To The Next Lowest Calculated And Responsive Bidder. 12 Warranty. To Assure That Manufacturing Defects Are Corrected By Supplier, A Warranty Security Shall Be Required For A Minimum Of Three (3) Months For Expendable Supplies, And One (1) Year In The Case Of Non-expendable Supplies. The Obligation Shall Be Covered By Retention Money(1%) Of The Contract Price And Shall Be Released Only After The Lapse Of The Warranty Period Or In The Case Of Expendable Supplies, After Consumption Thereof: Provided, However, That The Supplies Delivered Are Free From Patent And Latent Defects And All The Conditions Imposed Under The Contract Have Been Fully Met. Rfq Proposal Form Rfq Reference: Svp 25-b-0018 Total Abc: Php 64,145.00 After Having Carefully Read And Accepted The Terms And Conditions, I/ We Submit Our Quotation For The Item(s) As Follows: Item No. Description Qty Unit Of Issue Approved Budget For The Contract ( Unit Cost Per Line Item ) Offer Compliance With Technical Specifications (please Check) Remarks (indicate The Price, Brand/model And Specifications. Attach Brochure If Available.) Yes No Unit Cost Total Cost Brand/model And Technical Specifications Purpose : Delivery Of Supplies And Materials For Office Expenses. Lot. Ii Cleaning Equipment And Supplies 1 Air Freshener, Aerosol Type, ≥280ml, Assorted Scent 7 Can 220.00 [ ] [ ] 2 Bathsoap, Regular Size, Germicidal/antibacterial 5 Piece 35.00 [ ] [ ] 3 Floor Cleaner, Floor (500ml/bot) 5 Bottle 200.00 [ ] [ ] 4 Glass Cleaner, Spray, 500ml/bot 5 Bottle 180.00 [ ] [ ] 5 Dishwashing Liquid, Concentrate, 250ml 10 Piece 110.00 [ ] [ ] 6 Dishwashing Paste, 400grams 10 Piece 45.00 [ ] [ ] 7 Dishwashing Sponge, Super Absorbent 5 Piece 40.00 [ ] [ ] 8 Disinfectant Concentrate, 1000ml 2 Liter 500.00 [ ] [ ] 9 Disinfectant Spray, Aerosol Type, 340grams 2 Can 400.00 [ ] [ ] 10 Feather Duster, Authentic Feathers, Dowel Handle, Good Quality 2 Piece 120.00 [ ] [ ] 11 Fabric Conditioner, Antibac, 1000ml 2 Liter 300.00 [ ] [ ] 12 Floor Mat, Rubberized 2 Roll 200.00 [ ] [ ] 13 Muriatic Acid, Pure, 3.785 Liters 2 Gallon 350.00 [ ] [ ] 14 Stain Remover/bleach, 900ml 5 Liter 70.00 [ ] [ ] 15 Toilet Deodorant Cake, 99%, 50gms 10 Piece 45.00 [ ] [ ] Lot. Iii Common Office Supplies 16 Refill Ink, For G-tec C4 Sign Pen 14 Piece 55.00 [ ] [ ] 7 Black And 7 Blue 17 Sign Pen, Fine Point G-tec, Tip 0.4mm, Blue 10 Piece 85.00 [ ] [ ] 18 Sign Pen, Fine Point G-tec, Tip 0.3mm, Black 10 Piece 85.00 [ ] [ ] 19 Sign Pen, Liquid/gel, 0.7mm, Black 10 Piece 80.00 [ ] [ ] 20 Glue, Padding, 1 Kilo/jar, Red 1 Jar 250.00 [ ] [ ] 21 Clipboard, Plastic, Long, With Side Pockets, Hardbound, Good Quality 2 Piece 200.00 [ ] [ ] 22 Glue Gun, 20 Watts With On/off Switch (suitable Glue Stick Size 7.5mm), Big, Heavy Duty 1 Piece 250.00 [ ] [ ] 23 Laminating Film, 125 Microns, 100pcs/pack 1 Pack 550.00 [ ] [ ] 24 Laminating Film, 250 Microns, 12inches X 50 Meters 1 Roll 1,500.00 [ ] [ ] 25 Binder Clip, Paper, 32mm, 12s 2 Box 40.00 [ ] [ ] 26 Binder Clip, Paper, 41mm, 12s 2 Box 45.00 [ ] [ ] 27 Scissors, Symmetrical, Blade Length: 65mm Min, Good Quality 3 Piece 150.00 [ ] [ ] 28 Bond Paper, Multi-purpose, Short, 70gsm, 500 Sheets Per Ream 5 Ream 200.00 [ ] [ ] 29 Photo Paper, Glossy, A4, 180gsm, 20s/pack 10 Pack 120.00 [ ] [ ] 30 Sticker Paper, Glossy, Long, (10s/pack), White 5 Pack 90.00 [ ] [ ] Lot. Iv Furniture And Furnishings 31 Computer Chair, 360 Degree Rotation Function Adjustable Height 300mm Five-star 280 Pp Caster 100 Kg Maximum Load Durable And Comfortable Five-star Chrome Base Backrest And Armrests Are Made Of Pp Plastic 1 Unit 3,500.00 [ ] [ ] 32 Executive Chair, With Lumbar Support Arm Rest, Mid Back, Rollng Swivel Adjustable 1 Unit 5,000.00 [ ] [ ] 33 Chairs, High Stool Bar Material: Hard Pvc Width: 330mm Chrome Glass Lift And 385mm Chrome Based Color: Black 2 Unit 3,500.00 [ ] [ ] Lot. V Information And Communication Technology Equipment 34 External Hard Drive, Itb, 2.5"hdd, Usb 3.0, Product Info Capacity: 1tb Dimensions: L X W X D: 4.52 In X 3.07 In X 0.46in Weight: 148 G/0.326 Lb What’s Included • Usb 3.0 Cable 1 Piece 3,500.00 [ ] [ ] Lot. Vi Information And Communication Technology Equipment, Devices And Accessories 35 Signature Pad, Lcd Signature Pad Display Type: F-stn Positive Reflective Lcd Cover Plate Surface: Tempered Glass Native Resolutions: 320x200 Pixels Coordinate Res: 2540 Lpi Coordinate Accuracy: +0.02 Inch (+0.5 Mm) Center Reading Technology: Electromagnetic Resonance (emr) Pen Port Rate: 200 Points Per Second Pen Pressure Levels: 1024 Warranty: One Year! 1 Unit 17,000.00 [ ] [ ] (good Quality And Heavy Duty) Lot. Vii Office Equipment And Accessories 36 Cork Board, 3ft X 2ft, With Aluminum Frame, 3/4inch Thick 1 Piece 1,000.00 [ ] [ ] 37 Board, For Illustration, 30" X 40" 5 Piece 50.00 [ ] [ ] 38 Paper Shredder, Cutting Width: 3mm-4mm (entry Level) 1 Piece 7,500.00 [ ] [ ] ***nothing Follows*** ( Supplier Must Provide Complete Data For The Information Required Below ) Delivery Period Warranty Place Of Delivery Signature Over Printed Name Designation Name Of Business Address Telephone/mobile/fax No Email Address

Details: Amendment 1: Projnet Information Added Below solicitation Number: W912ee25o0001 set Aside – Total Small Business title: Indefinite Delivery Type (idc) Contract For Automated Hydrographic Surveying For Gage And Discharge Measurements And In Support Of The Maintenance Dredging Program Within The Geographic Boundaries Of The Mississippi Valley Division this Pre-solicitation Notice Is For Interested Firms To Submit Their Sf 330 By 19 February 2025 14:00 Hours, Cst. Firms Will Be Selected For Negotiations Based On Demonstrated Competence And Qualifications For The Required Work. This Is Not A Request For Proposal. 1. W912ee - Contract Information: Sf 330s Are Due By 14:00 Hours On 19 February 2025. Firms Will Be Selected For Negotiation Based On Demonstrated Competence And Qualifications For The Required Work. Three (3) Indefinite Delivery Contracts (idcs) Will Be Negotiated And Awarded As A Result Of This Solicitation. These Contracts Will Share A $15m Cumulative Capacity And Will Comprise A Multiple Award Task Order Contact (matoc). Each Contract Will Have A Performance Period Of Five (5) Years From The Date Of Contract Award Or Exhaustion Of The Cumulative Matoc Capacity Of $15 Million, Whichever Comes First. Each Contract Awarded As A Part Of The Matoc Will Have A $1,000 Minimum Guarantee. the Work Will Be Accomplished Primarily Within The Vicksburg District But May Be Within The Mississippi Valley Division (mvd) And Other Areas As Needed To Support The Mission Of The Us Army Corps Of Engineers. work Will Be Issued By Negotiated Firm Fixed-price Or Labor-hour Task Orders. It Is Anticipated That The Estimated Workload For Each Year Will Be Approximately $3.0 Million. The Cumulative Total Of Task Orders Issued Over The Life Of The Matoc Shall Not Exceed The Capacity Of $15.0 Million. Allocation Of Task Orders Will Be Based On Specialized Experience, Past Performance, Project Schedules, And/or Current Workload. Work Will Be Issued By Negotiated Firm Fixed-price Or Labor-hour Task Orders. this Announcement Is A Total Small Business Set-aside, Which Includes Small Disadvantaged Businesses, Section 8(a) Firms, Hubzone Small Businesses, Women-owned Small Businesses, Veteran-owned Small Businesses, Service-disabled Veteran-owned Small Businesses, And Historically Black Colleges Or Universities/minority Institutions. The Small Business Size Standard For Surveying And Mapping Services Is $19.0 Million, Naics Code 541370 For Surveying And Mapping Services. 2. Project Information: The Work Consists Of Providing Professional Services As Required In Connection With Automated Hydrographic Surveying, Including Both Single-beam And Multi-beam Methods, And Automated Topographic Surveying In Support Of The Vicksburg District Maintenance Dredging And Mat Sinking Operations At Various Locations Primarily Within The Limits Of The Vicksburg District But May Include Any District Within Mvd. Automated Real-time Kinematic (rtk) Differential Gps Hydrographic Surveys And Automated Topographic Surveys Will Be Required On The Mississippi River, Its Tributaries, And Smaller Rivers And Streams And Associated Harbors. adcp Surveys For The Acquisition Of River Current And Discharge Data May Be Required For Acquisition Of Current And Flow Patterns At Locks And Dams, Around Dikes, Bridge Piers Or Obstructions In Channels. The Work Consists Of Taking A Defined Number Of Discharge Measurements On A Routine Basis Along The Mississippi, Red, And Ouachita Rivers. The Measurements Will Be Taken With The Use Of An Acoustic Doppler Current Profiler (adcp) And A Single Beam Depth Sounder. The Data Collected Will Be Imported Into Personal Computer Software Specifically Designed To Calculate And View Flow Measurements. The Proposal Shall Include The Contractor’s Software(s) To Be Employed Under This Solicitation If Selected. The Work Will Also Require Collecting Daily Water Stage Data At Approximately 50 Gaging Sites Throughout The Vicksburg District And Reporting Information Daily And Monthly To The Vicksburg District. Additional Work Will Consist Of Maintenance Of Permanent Reference Elevation Markers At Each Gaging Site And Infrequent Collection Of Suspended Sediment Samples At Specific Discharge Ranges. Extreme Flow Conditions May Require A Combination Of The Adcp, A Single Beam Depth Sounder, And Differential Gps. The Contractor May Be Required To Take Special Purpose Flow Pattern And Discharge Measurements At Lock And Dam Locations. The Contractor May Be Required To Verify His System By Comparison With Conventional Discharge Methods. All Measurements Will Be In English Units. 3. Selection Criteria: Selection Will Be Based On The Following Criteria, Which Are In Descending Order Of Importance With A And B Being Of Equal Value. Criteria A Through F Are Primary; Criteria G Is Secondary And Will Only Be Used As A "tie-breaker," If Necessary. a. Specialized Experience With Sub-factors In Descending Order Of Importance: (1) Firm Must Have Prior Recent Experience In Automated Hydrographic Surveying In Streams Ranging In Size From The Mississippi River To Small Creeks, Oxbows, And Canals. (2) Firm Must Have Prior Recent Experience In Topographic, Construction, And Maintenance Dredging Surveys. Firm Should Demonstrate The Capability To Provide All Services In A Timely, Professional Manner And In A Format Consistent With Corps Of Engineers Cadd/gis Systems By Submission Of Examples Of Completed Work. (3) Firm Must Have Prior Recent Experience In Horizontal And Vertical Control Surveys. (4) Firm Must Have Experience In Adcp Hydrographic Surveying With Data Collection Integrating A Single Beam Depth Sounder And Differential Gps Positioning. (5) Firm Must Have Experience In Collecting Discharge Measurements By Conventional Methods. (6) Firm Must Have Experience In Collecting And Analyzing Suspended Sediment Samples From River Streams Ranging In Size From The Mississippi River To Small Creeks, Oxbows, And Canals. b. Professional Qualifications With Sub-factors In Descending Order Of Importance: (1) Firm Must Have At Least One Professionally Registered Land Surveyor In Arkansas, Mississippi And Louisiana. (2) Firm Must Delineate The Capability, Background, And Experience Of The Key Personnel Within The Firm Who Will Be Responsible For The Administration Of The Contract And Should Indicate The Ability To Ensure The Successful Performance Of The Work Required. (3) Firm Must Clearly Demonstrate The Availability Of Adequate Numbers Of Experienced Personnel To Perform The Various Tasks Associated With Automated Hydrographic Surveys, Automated Topographic Surveys, Adcp Data Collection And With Dredge Alignment Surveys. c. Past Performance With Subfactors In Descending Order Of Importance: (1) Consideration Will Be Given To Ratings On Previous Dod Contracts. (2) Consideration Will Be Given To The Performance Of Firms That Have Experience With Other Dod Organizations In The Type Of Work Required Under This Contract And Work Of Similar Nature, Complexity, And Difficulty. d. Capacity With Sub-factors In Descending Order Of Importance: (1) Firm Must Clearly Demonstrate The Ability To Respond To Emergency Dredge Alignment Survey Requirements Which May Require Commencement Of Field Work On Less Than 8 Hours’ Notice, Onboard And/or Real-time Plot Of Unedited Data, Analysis Of Plotted/graphed/printed Data, Setting Of Dredge Alignment Points With Determination Of Coordinates, And May Require Submittal Of Final Plotted Survey Within 24 Hours Of Completion Of Field Work. Firm Must Clearly Indicate The Capability In Writing Or Through Demonstration, If Required, To Respond On Short Notice To Emergency Dredging Requirements. This Includes Travel To The Job Site, Completion Of Fieldwork, Field Plotting Of Information, And Setting Of Survey Control Points For Dredge Alignment As Directed. (2) Firm Must Clearly Demonstrate The Accuracy And Speed Of Data Collection, Editing, Processing, Plotting, And Output Of Final Submission. (3) Firm Must Clearly Demonstrate The Availability Of All Incidentally Required Equipment Such As Tools, Markers, Stakes, Paint, Boats, Vehicles, Spare Units, Etc. (4) Firm Must Clearly Demonstrate The Capability To Furnish A Minimum Of Two Complete And Independent Automated Hydrographic Survey Parties As Well As A Two-man Adcp Hydrographic Survey Party With All Necessary Equipment And Supplies, Including Boat. e. Knowledge Of The Locality. Consideration Will Be Given To Familiarity With The Waterways Of The Vicksburg District. f. Dod Contract Awards In The Past 12 Months; The Greater The Award The Lesser The Consideration. g. Geographic Proximity To Vicksburg Mississippi. 4. Submission Requirements: Interested Firms Having The Capabilities For This Work Must Send One Electronic Copy Of Their Sf-330, Along With A Signed Sf-330 Part Ii For Each Prime And Subconsultant Listed. Sf-330 Packages Should Be Sent To: Mvkaecoordinator@usace.army.mil And Kasey.t.davis@usace.army.mil No Later Than 14:00 Hrs, Cst, On 19 February 2025. Include Both The Solicitation Number And The Company’s Uei On All Submittals. note The Following Restrictions On Submittal Of Sf330; Block E – Resumes Of Key Persons, Specialist And Individual Consultants Anticipated For This Project Will Be Limited To A Maximum Of 20 Pages (one Side). Block H—additional Information Will Be Limited To A Maximum Of 20 Pages (one Side). Pages In Excess Of The Maximum Of 20 Will Be Discarded And Not Used In Evaluation. All Telephone Calls Should Be Directed To Ms. Lane Vargas, (601) 631-7021. appointments Will Not Be Scheduled To Discuss This Announcement. this Is Not A Request For Proposal (rfp). A Fee/price Solicitation Will Be Issued At A Later Date, To The (3) Firms Determined To Be The Most Highly Qualified. ****note: Contractors Must Be Registered In The System For Award Management (sam), For Information See Http: Www.sam.gov. all Technical Inquiries And Questions Related To This Solicitation Shall Be Submitted Via Projnet. technical Inquiries And Questions Relating To This Solicitation Are To Be Submitted Via Bidder Inquiry In Projnet At (https://www.projnet.org). Bidders Are Encouraged To Submit Questions 5 Days Prior To Bid Opening To Ensure Adequate Time Is Allotted To Form An Appropriate Response And Amend The Solicitation, If Necessary. To Submit And Review Inquiry Items, Prospective Vendors Will Need To Use The Bidder Inquiry Key Presented Below And Follow The Instructions Listed Below The Key For Access. A Prospective Vendor Who Submits A Comment /question Will Receive An Acknowledgement Of Their Comment/question Via Email, Followed By An Answer To The Comment/question After It Has Been Processed By Our Technical Team. all Timely Questions And Approved Answers Will Be Made Available Through Projnet. the Solicitation Number Is: W912ee25o0001 the Bidder Inquiry Key Is: 8c547q-zn4769 specific Instructions For Projnet Bid Inquiry Access: 1. From The Projnet Home Page Linked Above, Click On Quick Add On The Upper Right Side Of The Screen. 2. Identify The Agency. This Should Be Marked As Usace. 3. Key. Enter The Bidder Inquiry Key Listed Above. 4. Email. Enter The Email Address You Would Like To Use For Communication. 5. Click Continue. A Page Will Then Open Saying That A User Account Was Not Found And Will Ask You To Create One Using The Provided Form. 6. Enter Your First Name, Last Name, Company, City, State, Phone, Email, Secret Question, Secret Answer, And Time Zone. Make Sure To Remember Your Secret Question And Answer As They Will Be Used From This Point On To Access The Projnet System. 7. Click Add User. Once This Is Completed You Are Now Registered Within Projnet And Are Currently Logged Into The System. specific Instructions For Future Projnet Bid Inquiry Access: 1. For Future Access To Projnet, You Will Not Be Emailed Any Type Of Password. You Will Utilize Your Secret Question And Secret Answer To Log In. 2. From The Projnet Home Page Linked Above, Click On Quick Add On The Upper Right Side Of The Screen. 3. Identify The Agency. This Should Be Marked As Usace. 4. Key. Enter The Bidder Inquiry Key Listed Above. 5. Email. Enter The Email Address You Used To Register Previously In Projnet. 6. Click Continue. A Page Will Then Open Asking You To Enter The Answer To Your Secret Question. 7. Enter Your Secret Answer And Click Login. Once This Is Completed You Are Now Logged Into The System.