City Of Cape Town Tender

* Pump 540022835 Please See Attached Specs Supply And Delivery Of 1 Off Pump Required For Business Park 2 Ps. The Pump Supplied Must Be According To The Coct Standard Specification D26.3. For Submersible And Immersible Pumps. #h Provide Oem Manuals, Specifications And Drawings Of The Supplied Pumps. #h Supply And Delivery Of The Pump To Eam Blomtuin Workshop Contractor To State The Delivery Date Of The Pump. #h Supply The Pump Performance Graphs And Data Sheets. #h Cable Length And Size Should Suit The Requirements Of The Pump Station 20 Meters. #h Cable Type And Size According To Oem, Protections Should Include Drive End Bearing, Non - Drive End Bearing, Temperatures, Winding Temperature And Water Ingress Sensors. (pt100¡¦s) #h The Pump Should Have The Same Duty And Head As The Current Pump Installed (like For Like Or Equivalent). #h The Suction Inlet And Discharge Outlet Of The Pump Should Be The Same Flange Diameter, Drilling And Orientation As A Pumpex Kp203 4310. #h Dimensions And Duty Should Be Equivalent To The Pumpex Kp 203 4310 #h The Pump Should Have The Specifications Below Or Equivalent. Pump Specifications Pump Type: Submersible Pump Medium: Raw Sewage Flow Rate 970m3/hr Head 8,65m Impeller Diameter 359 Mm Discharge Diameter 200 Mm Inlet Diameter 200 Mm Impeller Type Suitable For Raw Sewage Max Speed 1450 Rpm Blades - Electrical Specifications Phases -3 Poles -4 Speed Max 1450 Rpm Rated Power Up To 37kw Insulation Class Ip 68 Current - Rated Voltage 400 V Frequency 50 Hz Protection Winding Temperature, Water Ingress Cct Representative Lionel Mashonganyika Mechanical Technician: Blomtuin Depot, 2 Blom Street, Blomtuin, Bellville Engineering & Asset Management, Technical Services, Water & Sanitation T: 021 444 4770 | C: 082 341 8247 | E: Lionel.mashonganyika@capetown.gov.za * 540022919 Pumps - Please See Attached Quantity: 3 Specs: Supply And Delivery Of 1 Off Pump Required For Business Park 2 Ps. The Pump Supplied Must Be According To The Coct Standard Specification D26.3. For Submersible And Immersible Pumps. #h Provide Oem Manuals, Specifications And Drawings Of The Supplied Pumps. #h Supply And Delivery Of The Pump To Eam Blomtuin Workshop Contractor To State The Delivery Date Of The Pump. #h Supply The Pump Performance Graphs And Data Sheets. #h Cable Length And Size Should Suit The Requirements Of The Pump Station 20 Meters. #h Cable Type And Size According To Oem, Protections Should Include Drive End Bearing, Non - Drive End Bearing, Temperatures, Winding Temperature And Water Ingress Sensors. (pt100¡¦s) #h The Pump Should Have The Same Duty And Head As The Current Pump Installed (like For Like Or Equivalent). #h The Suction Inlet And Discharge Outlet Of The Pump Should Be The Same Flange Diameter, Drilling And Orientation As A Pumpex Kp203 4310. #h Dimensions And Duty Should Be Equivalent To The Pumpex Kp 203 4310 #h The Pump Should Have The Specifications Below Or Equivalent. Pump Specifications Pump Type: Submersible Pump Medium: Raw Sewage Flow Rate 970m3/hr Head 8,65m Impeller Diameter 359 Mm Discharge Diameter 200 Mm Inlet Diameter 200 Mm Impeller Type Suitable For Raw Sewage Max Speed 1450 Rpm Blades - Electrical Specifications Phases -3 Poles -4 Speed Max 1450 Rpm Rated Power Up To 37kw Insulation Class Ip 68 Current - Rated Voltage 400 V Frequency 50 Hz Protection Winding Temperature, Water Ingress Cct Representative Lionel Mashonganyika Mechanical Technician: Blomtuin Depot, 2 Blom Street, Blomtuin, Bellville Engineering <(>&<)> Asset Management, Technical Services, Water <(>&<)> Sanitation T: 021 444 4770 | C: 082 341 8247 | E: Lionel.mashonganyika@capetown.gov.za Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent". Nb!!! Please Ensure That You Attach The Technical Data Sheets And Pictures Of The Item Quoted On, To Your Rfq Submission****failure To Adhere To This Requirement, May Result In Your Offer Being Non-responsive**** Allocation Of Preference Points *nb: The Municipal Bidding Document 6.1 (mbd 6.1) Has Been Amended, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission. In Order To Qualify For Preference Points, It Is The Responsibility Of The Bidder To: Submit A Duly Completed Mbd 6.1 Form (bidders Must Indicate How They Claim Points For Each Specific Goal). Submit Documentary Proof Of Updated Bbbee Certificate/sworn Affidavit And/or Cipc Certificate With Each Rfq Submission To Validate Specific Goals. (if A Bidder Is Registered And Active On The City#s Supplier Database And Has Submitted The Bbbee Certificate/ Sworn Affidavit/ Cipc Certificate, The Submission Of Said Documents Is Not Necessary). It Is Therefore Incumbent On Suppliers To Ensure That Documents Are Kept Updated. Failure To Comply With The Above Will Result In A Zero (0) Allocation For Preference Points. *** Please Ensure That All Required Insurances Such As Your Public Liability, Employers Liability Or Coida And Motor Vehicle Insurance Are Attached And That They Are Up-to-date. If You Utilise Couriers And Do Not Have Motor Vehicle Insurance, Then Please Mention This. Also Ensure That Your Updated Declaration Of Interest And Bbbee Is Attached At All Times***