City Of Bislig Tender

Description 1. The Local Government Unit Of Bislig City, Through The General Fund Mooe 2025, General Fund Capital Outlay, 20% Edf Capital Outlay Intends To Apply The Sum Of One Million Three Hundred Sixty Thousand Nine Hundred Fifty Pesos Only (ᵽ 1,360,950.00) Being The Abc To Payments Under The Contract For Pbd 058-2024 (goods). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Local Government Unit Of Bislig City, Through The General Fund Mooe 2025, General Fund Capital Outlay, 20% Edf Capital Outlay Intends To Apply The Sum Of One Million Three Hundred Sixty Thousand Nine Hundred Fifty Pesos Only (ᵽ 1,360,950.00) Being The Abc To Payments Under The Contract For Each Lot/item. Bids Received In Excess Of The Abc For Each Lot Shall Be Automatically Rejected At Bid Opening. 2. The Local Government Unit Of Bislig City Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Thirty (30) Calendar Days Upon Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From The Bac Secretariat And Inspect The Bidding Documents At The Address Given Below During Office Hours From Monday To Friday At 8:00 Am – 5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 05, 2024 From The Given Address And Website(s) Below Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos Only (p5,000.00) The Procuring Entity Shall Allow The Bidder To Deposit At The City Government Of Bislig Lbp Account 2162-1017-68 And Present Its Proof Of Payment For The Fees In Person Or Through Electronic Means. The Bidding Documents May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Local Government Unit Of Bislig City Will Hold A Pre-bid Conference On December 13, 2024, 9:00 Am At Conference Room, City Engineering Office, City Hall, Brgy. Poblacion, Bislig City, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, On Or Before December 27, 2024, 1:30 Pm. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On December 27, 2024, 1:30 Pm At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Local Government Unit Of Bislig City Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 5 Pc Bow Rake Specification: - 8-22 Teeth, - Metal Head, - Stainless Steel Handle, - Length Of Handle At Least 150cm. - With Rubber Grip, - Adjustable Length (telescopic), - Heavy Duty 2,000.00 10,000.00 20 Un Buggy Concrete Specification: - Gauge 14-16 - 13" Solid Tire (st1308e) - At Least 80 Liters Capacity 6,500.00 130,000.00 1 Un Chainsaw: Specification: - Bar Length (inches): 18" - 20" - Displacement (cm³):40 - 110 Cm³ - Power Output (kw/hp): 1.7kw To 4.8kw/2.4hp To 6.5 Hp - Revolutions Per Minute(rpm) Max: 7,500 - 12,800 - Revolutions Per Minute(rpm) Idle: At Least 2,000 - Weight (kg): 6.5 - 11kg Saw Chain Pitch: 0.325" - 0.375" 35,000.00 35,000.00 2 Set Clamp Meter, Ac , 600a Maximum (highly Precise Test Equipment Iso9001 5,000.00 10,000.00 20 Pc Concrete Block Molder Specification: - Reusable Hard Plastic Mould, - L - 22 Cm., W - 11 Cm, H - 5 Cm. 450 9,000.00 1 Un Concrete Cutting Machine Specifications: - Voltage:220-240v - Frequency: 50-60 Hz - Blade Size: 300-500 Mm - Speed: 3800-4300 Rpm - Power Source Type: Double Insulation Electric Corded Maximum Power: - At Least 3.2 Kw (maximum) With Complete Accessories: - 1un Concrete Saw - 1 Diamond Disc Blade - 1 Pair Carbon Brush - 1 Unit Water Pump - 1 Unit Tool Kit - 1 Unit Pipe - 1 Unit User Manual 12,000.00 12,000.00 2 Un Concrete Vibrator Specification: - Drive Mode: Electric Vibrator - Frequency: At Least 12000rpm - Vibrating Amplitude: 1mm-2.1mm - Length Of Flexible Shaft: 4m,5m,6m,7m . - Voltage: 220v 380v - Weight: 12-22kg - Dimension(l*w*h) At Least 960 X 545 X 73mm. - Engine: Electric Engine - Power Source: 1.5kw - 2.3kw 80,000.00 160,000.00 1 Set Crimping Plier, Manual, 6-50mm2, Ring Lug Terminal, Heavy Duty Wire, Lug Copper, Lug Terminal Cable Crimping Tool 6,000.00 6,000.00 3 Unit Digital Lazer Distance Meter Area Specification: - At Least 100m Range - Bluetooth Laser Range Finder Measuring Tool - Accurate At Least Up To 100m Measuring Laser With Digital Camera Viewfinder & Zoom Function - Large, High-contrast Ips Colour Display With Flip Screen Ensures Optimal Reading - Laser Measure Connects Via Bluetooth For Efficient Data Documentation - Laser Diode: 400-700nm, Less Than 1 Milliwatt - Measurement Range: 0.08 - 100.00m - Laser Class: At Least 2 - Measurement Accuracy, Typical : ± 1.5 Mm* (*plus Use-dependent Deviation) - Measurement Range Of Incline Measurement: 0 - 360° (4 X 90°) - Measuring Accuracy (typical): ± 0.2°*(*plus Use-dependent Deviation) - Measurement Time, Typical: < 0.5 S - Measurement Time, Max.: 4 S - Power Supply: 3 X 1.5 V Lr6 (aa) - Automatic Deactivation: 5 Min - Weight, Approx.: 0.23 Kg - Units Of Measurement: M/cm/mm/ft/inch/ft-inch - Memory Capacity (values): At Least 50 - Dust And Splash Protection: Ip 54 - Tripod Thread: At Least 1/4" - Digital Viewfinder: Integrated - Data Transfer: Bluetooth™ 4.2 Low Energy - Laser Colour: Red 15,000.00 45,000.00 2 Un Electric Circular Saw Specifications: - Continuous Rating Input: At Least 1,600w - Blade Diameter: 185mm (7-1/4")/190mm (7-1/2") - Max Cutting Capacity: 90°:64-67 Mm 45°: 35-45 Mm - No Load Speed (rpm): 0-5,500 Rpm - Dimensions (l X W X H): At Least 300x240x261 Mm - Net Weight: At Least 4.0 Kg - Power Supply Cord: At Least 2.4 M Bevel Tilt: 0-45 15,000.00 30,000.00 4 Un Electric Hand Drill Accessories : - Chuck Key - Chuck Cap. - 1.5mm - 10mm - At Least 450w (continuous Rating Input) - All Bearing Construction For High Durability Specifications : - Continuous Rating Input: At Least 450w - Drilling Capacities In Steel: At Least 10mm - Drilling Capacities In Wood: At Least 25mm - Net Weight: 1kg - 1.5kg - No Load Speed: 0 - 3,400 - Overall Length: At Least 228mm - Power Supply Cord: At Least 2.0m 5,500.00 22,000.00 3 Un Electric Planer - Continuous Rating Input: At Least 750w - Planing Width: At Least 82 Mm (3-1/4") - Planing Depth: 2 Mm - 3 Mm (1/8") - No Load Speed (rpm): 15,000-18,000 - Overall Length: At Least 415 Mm (16-3/8") - Net Weight: 5 - 5.5 Kg (11.2 Lbs) - Power Supply Cord: At Least 5.0 M (16.4 Ft) 32,000.00 96,000.00 1 Set Fiber Optic Fusion/splicer Machine Specification: - Fiber Alignment: Cladding Alignment, Manual Alignment - Motor Number: At Least 4-motors - Splicing Time: At Least 6-10 Seconds - Heating Time: 16 - 24 Seconds - Fiber Type: Single-mode Fiber (smf/g.652), Bif/g657); Suitable For Single-mode, Multi-mode, Bare Fiber, Tail Fiber, Drop Cable, Jumper, Invisible Fiber Fusion - The Cladding Diameter: 80-150µm - Splicing Mode: Conventional/high Precision Welding - Battery Capacity: 4800mah-5600mah Large Capacity Lithium Battery Charging Time =3.5; It Can Continuously Weld And Heat About 160cores - Display: At Least 5-inches Or 7 Inches Tft Color Display Screen - Power Supply: Input Ac100-240v 50/60hz, Output Dc13.5v/4.8a, Current Power Mode Can Be Identified, Real Time Monitoring Of Thecurrent Battery Level Note: - With Complete Accessories, Carrying Case And Connectors As Need With Free Fiber Optic Protection Sleeves Double Needle Reinforced Fiber Heat Shrinkable Protective Casing At Least 60mm Thk. 44,000.00 44,000.00 2 Un Hollow Block Maker/molder Dimensions: - 4in.thk. X 15.5in.l X 4.3in.w X 11.5in.(h) - Weight: 7kg - 8kg 2,500.00 5,000.00 2 Un Hollow Block Maker/molder Dimensions: - 6in.thk X 15.5in.l X 6.3in.w X 10.6in.h - Weight: 9kg - 10kg 2,500.00 5,000.00 1 Set Hydraulic Crimper, 16-300mm Yho 16 Ton Hydraulic Wire Crimper With 11 Dies 6,000.00 6,000.00 1 Unit Infrared Image Thermal Meter Specification: - Sensor Resolution: At Least 256*192 - Field Of View: At Least 56°*42.2° - Netd : <50mk - Ifov: At Least 3.8mrad - Focusing Method: Free Focus - Frame Rate: At Least 25hz - Temperature Measurement Range: 20 Degrees Celsius To 550 Degrees Celsius - Temperature Measurement Accuracy: ±2° - Temperature Measurement Resolution: 0.1°c - 0.2°c - Temperature Measurement Tool: Center Point Temperature Measurement/cold Spot & Hot Spot Tracking - Temperature Alarm: Full Frame High Temperature/low Temperature Alarm - Camera Function: Support. With Temperature Data - Secondary Analysis: Equipped With Pc Analysis Software, Which Can Perform Secondary Analysis On Data - Display Size: At Least 2.8 Inch Lcd - Screen Resolution: At Least 320*240 - Storage: At Least 16gb Sd Card, Support Expansion - Working Hours: At Least 11 Hours @250degree Celsius Indoor 20000.00 20,000.00 2 Un Insulation Tester, Digital Specification: - 4000 Megaohms Maximum - Megger Resistance Tester - 230volts - 1kv (highly Precise Test Equipment Iso9001) 5,500.00 11,000.00 2 Set Jack Hammer Heavy Duty Specification: - Power Source: Corded - Handle Type: Chipper - Chuck Style: At Least 1-1/8 In Hex - Impact Energy: At Least 22 Ft-lb - Blows/minute (bpm): 0 To 1,300(max.) - Tool Weight: 30-50 Lb - Current: At Least 15 A - Voltage: At Least 120v Ac No. Of Speed Settings: At Least 1application Asphalt Work; Foundation Removal Kit Contents (1) Bare Tool; (1) Pointed Chisel - Minimum Blows Per Minute: 0 Bpm - Motor Type: Electric - Overall Height: At Least 5 In - Overall Width: At Least 13 In - Plug Type: Three-prong At Most Tool Length: 25-35 In 95,000.00 190,000.00 2 Un Jet Pump Specification: • Self-priming Jet Pumps In Stainless Steel • Height: 25m (min) 43m (max) • Volume Flow Rate(q): 40l/min (min) To70l/min (max) • Suction Lift: At Least 9m • Cap: 20uf/450v • 220-240v • 60hz • 5.2a • P2 0.75kw • 3450r/min • Ph 1 Class155(f) Ip55 • Thermally Protected • Maximum Water Temperature 70c 6,000.00 12,000.00 5 Pc Leaf Rake Specification: - Stainless Steel Handle, - At Least 18-22 Teeth, - Adjustable Length (telescopic), - Adjustable Drag Head, - Length Of Handle At Least 150cm., - Heavy Duty 2,000.00 10,000.00 2 Un Measuring Wheel Specification: - Aluminium Wheel: 12 In. - Counter: At Least 10000 Feet(1,000m) - With Convenient Push-button Reset - 2-section Snap-lock Handle - With Ergonomic Handle (telescopic) - Built-in Kickstand - Full Cushion Tire - Reset Trigger In Handle And Counter - Braking Trigger In Handle 8,500.00 17,000.00 2 Un Metal Push Cart Specification: - Heavy Duty Steel Platform Truck At Least 500kgs Sturdy On Welded Construction With Removable Push Bar Type Handle And Cross Brace. - Steel Deck At Least Gauge 12-14 Equipped With Standard 2 Rigid And 2 Swivel Heavy Duty Caste With Mold On Rubberwheels - At Least 500 Kgs Capacity - Weight: 35-40 Kgs - At Least 6in.dia Rubber On Rubber Tires - 24" W X 38" L X 36" H 15,000.00 30,000.00 1 Un Multimeter, Digital, 800a Maximum (highly Precise Test Equipment Iso9001) 40,000.00 40,000.00 2 Set Phase Sequence Tester, Phase Indicator (highly Precise Test Equipment Iso9001) 10,000.00 20,000.00 1 Set Plate Compactor Specifications: • Gasoline Driven Plate Compactor • Power Output: At Least 6.5 Hp • Weight: At Least 85kgs • Frequency: At Least 4200vpm • Centrifugal Force: At Least 15kn • Compaction Depthat Least 30cm • Travel Speed: 38-45cm/s • Efficiency: 610-660m2/hr • Plate Size: L: 50-60 Cm, W: 40-50 Cm. 40,000.00 40,000.00 100 Pc Reflective Vest Specification; - Safety Vest - With Reflector - 100 % Polyester With Pocket - Suit Type - Color : Orange 350 35,000.00 2 Un Tape Measure Specification: • Corrosion-resistant • Rubber Grip For Comfort • Reinforced Blade End For Long Life • End Loop For Easy Pulling And Anchoring • At Least 100m/300" Long Tape • At Least 19mm Steel Mylar-coated Blade • 3:1 Gear Ratio 5,500.00 11,000.00 2 Set Tool Set, Electrician With Bag Inclusion: - 1 Pc Digital Multimeter (alkaline Battery Included) - 1 Pc Adjustable Wrench,6" - 1 Pc Long Nose Pliers, 6" - 1 Pc Diagonal Cutting Pliers, 6" - 1 Pc Combination Pliers, 7" - 1 Pc Wire Stripper,6" - 8 Pc Hex Key Set: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm - 2 Pcs Slotted Screwdriver: Sl3 * 75mm, Sl5.5 * 100mm - 2 Pcs Phillips Screwdriver: Ph0 * 75mm, Ph1 * 100mm - 1 Pc Snap-off Blade Knife - 1 Pc Steel Measuring Tape, 3m - 1 Pc Test Pencil, 140mm - 1 Pc Flashlight - 1 Pc Pvc Insulating Tape - 1 Pc Electrician’s Knife - 1 Pc Electrician’s Scissors, 5.5" - 1 Pc Tools Bag 7,000.00 14,000.00 15 Un Traffic Cone Specification: - Color: Black, Orange, White - Height: At Least 450mm - Cone Base: At Least 270 X 270 - Application: Traffic - Material: Pvc With Rubber - Base Reflective: Yes - Class 2 Reflective Cones These Class 2 Reflective Cones Are Orange And White With A Black Rubber Non-skid Base. For Outdoor Use On Roads And Construction Sites 3,330.00 49,950.00 2 Unit Vernier Caliper Gauge, Digital Specification: • Measuring Range: 0-150mm. Or 0-6 In. • Resolution: 0.01 To 0.02mm. Or 0.0005in. • Repeatability: 0.01 To 0.02mm. Or .0005 In. • Maximum Measurement Speed: 1m/s. At Most • Power: 1 X 1.5v Lr44 Cell (included). • Size: At Least 237 X 76 X 11mm. Or 9.33 X 2.99 X 0.43 In. For Caliper, At Least 40 X 15mm. Or 1.57 X 0.59in. For Lcd Screen. As For Electronic Digital Caliper Super Large, Below Are The Main Features: 1) Big Lcd Screen With At Least 3 Buttons 2) High Quality 3) Four Way Measurement (od, Id, Step Depth) 4) With Thumb Roller, Move Smooth 5) Metric/inch Conversion And Zero Setting At Any Position 3,000.00 6,000.00 2 Set Welding Machine Inverter Specification - Rated Input Voltage(v): Ac220-440v±15% 1phase - Input Frequency(hz): 50-60 Hz - No-load Voltage (v): At Least 70 - Vrd Voltage (v): At Least 18 - Output Current (a): 30-190 - Efficiency: At Least 85 - Duty Cycle (%):20-30 Kva - Power Factor: At Least 0.70 - Insulation Grade: H - Housing Protection Grade: At Least Ip21s - Weight(kg): At Least 6.4 15,000.00 30,000.00 2 Unit Cement Mixer, Heavy Duty A-frame Roller Volume: At Least 400l 220-440v 60hz Package Inclusion: 1 X One-bagger Concrete Mixer At Least 1 X 7.5hp Low Speed Gasoline Engine 1 X Belt 1 X Pulley 1 X Oil 100,000 200,000