City Of Baguio Tender

Description 2 Sets 6” Ø Gate Valve, Flanged Type With Companion Steel Flanges And Bng, Pn 25 (please See Complete Specifications Below) Approved Budget Cost: ₱53,105.00 / Pc 1 Set 4” Ø Gate Valve, Flanged Type With Companion Steelflanges And Bng, Pn 25 (please See Complete Specifications Below) Approved Budget Cost: ₱30,082.00 / Pc 1 Set 4” Ø Gate Valve, Flanged Type With Companion Steelflanges And Bng, Pn 16 (please See Complete Specifications Below) Approved Budget Cost: ₱30,665.00 / Pc 2 Sets 2” Ø Gate Valve, Flanged Type With Combinationflanges And Sealing Ring And Bolts & Nuts, Pn 16 (please See Complete Specifications Below) Approved Budget Cost: ₱11,600.00 / Pc 5 Pcs 1” Ø Gate Valve, Threaded Type Class 125 Features: Brass Body, Non-rising Stem, Screw-over Bonnet, Threaded Ends Specifications: Nominal Pressure: Non-shock Working Pressure Max Working Pressure 150 Psi Fitting To Withstand Min. Working Pressure Of 1.00 Thread Shall Be Npt Water Way Shall Unobstructed When Fully Opened Material List Handwheel: Alloy / Packing Nut: Brass Bonnet: Brass / Stem: Brass Rod Wedge: Brass / Body: Brass Bonnet Gasket: Plastic / Packing: Teflon Approved Budget Cost: ₱846.00 / Pc Standard Specification For 2” To 8” Diameter Flange Type Gate Valves Pn16: Design Code: Hydraulic Test To Bs 5163 (din3230 / Din3352) Or Jis B2043, Din 3352, Awwa C509, Bs5163 Temperature Range: -20 To 160 Degrees Centigrade Face To Face: Bs 5163 Or Jis B2002, Din 3202-f5, Din 3202-f4, Ansi B16.10, Bs 5163 End Flange: En1092-2 (iso 7005-2) Or Jis B2212 10k, Din 2533 Pn 10/16, Ansi 150#, Bs4504 Pn 10/16 Tightness Test: Operating Torque Test Or Jis B2003, Din 3230, Awwa C509, Bs 6755 Materials: Body: Ductile Iron, Ggg-50 To Din 1693 (bs 2789 Grade 500-7) Or Ductile Iron Wedge: Ductile Iron (di) + Nbr Or Ductile Iron, Ggg-50, Core Fully Encapsulated With Epdm Rubber With Integral Wedge Nut Of Dezincification Resistant Brass, Cz 132 To Bs 2874 Wedge Nut: Brass Or Dezincification Resistant Brass Stem: Stainless Steel, Din X 20 Cr 13 Or Stainless Steel / Brass Bonnet Gasket: Epdm Rubber Or Epdm / Nbr Bonnet: Ductile Iron (di) Or Stainless Steel A2, Sealed With Hot Melt O-ring: Nbr Or Epdm / Nbr Stem Collar: Brass Gland Flange: Ductile Iron Or Ductile Iron Gjs-500-7 (ggg-50) Dustproof Ring: Nbr Or Epdm / Nbr Handwheel: Ductile Iron (di) Hex Nut: Cast Iron Overall Dimensions: Size / Dn Length (l) Mm Height (h) Mm Width Or D Mm Weight Kgs Dn50 (2”) 178 300-241 160-165 13-14 Dn100 (4”) 229 334-430 200-220 26-28 Standard Specification For 2” To 8” Diameter Flange Type Gate Valves Pn25: Design Standards: Design Code: Hydraulic Test To Bs 5163 Maximum Pressure: Pn25 Inspection And Test Std: Iso5208-1982 Or Acs Certificate 18 Acc Ny 269 Face To Face: En 558 Or Bs5163 Flange Drilling: En1092 Or En1092-2, Iso 7005-2 Materials: Body: Ductile Iron Gjs-500-7 Or Ggg50 Wedge Core: Ductile Iron (di) Wedge Rubber: Epdm Rubber Wedge Nut: Brass Stem: Stainless Steel 420 Bonnet Bolt: Steel, Zinc Plated Or Q235a Bonnet: Ductile Iron (di) O-ring: Nbr Rubber Thrust Collar: Brass Overall Dimensions: Size / Dn Length (l) Mm Height (h) Mm Width (d) Mm Weight Kgs Dn100 229 320-324 235 21-29 Dn150 267 400-429 300 35-51 Note: Not To Be Awarded On A One (1) Lot Basis. This Is A Two (2) Envelope System: Envelope “a” To Contain The Following; Among Others: A) A Refundable Bid Bond In The Form Of Cash, Manager's Or Cashier's Check Equivalent To 2% Or Surety Bond Callable On Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission Equivalent To 5% Of The Total Approved Budget Cost Is Required For A Total Purchase Bid Amount Of ₱50,000.00 And Above. Validity Of The Surety Bond Is 120 Days From The Date Of Opening Of Bids Or Bid Securing Declaration Regardless Of Amount Of Bid; B) Terms Of Payment, Delivery, Warranty, Bid Validity And Complete Specifications; C) Brochure/s (original); D) Proof Of Payment Of A Non-refundable Fee Of ₱500.00; Otherwise, Bids Shall Not Be Opened E) Certificate Of Authorized Distributorship / Dealership Issued By The Principal Supplier To The Participating Bidder (with Red Ribbon) If None Has Been Submitted To The Bac In Its Accreditation; -for Bidders Who Have Foreign Principal Suppliers, The Bwd-bac Shall Accept An Apostilled Certificate Of Authorized Distributorship / Dealership Issued By A Competent Authority Of The Host Government In Lieu Of The Certificate Of Authorized Distributorship / Dealership (with Red Ribbon), Except For Non-contracting Countries To The Apostille Convention, Which Still Require The Red Ribbon Requirement. -for Locally Produced / Manufactured Products, Only A Certificate Of Authorized Distributorship / Dealership W/o Red Ribbon Is Required If Applicable; F) Iso Certificate Issued To The Principal Supplier/participating Bidder For The Offered Material Or Equipment Brand Name (if None Has Been Submitted To The Bac In Its Accreditation); G) International Certificate Of Warranty. Envelope “b” To Contain The Bid Cost Per Unit.