City Of Baguio Tender

Description 1,510 Pcs ½” Ø Ball Valve / Stop Cock Ball Type-lock Wing (threaded) (please See Complete Specifications Below) Approved Budget Cost: ₱638.00 / Pc 5 Pcs 1” Ø Ball Valve / Stop Cock Ball Type-lock Wing (threaded) (please See Complete Specifications Below) Approved Budget Cost: ₱1,252.00 / Pc 315 Pcs 1” Ø Gate Valve, Threaded Type Class 125 (please See Complete Specifications Below) Approved Budget Cost: ₱931.00 / Pc 10 Pcs ” Ø Gate Valve, Threaded Type (please See Complete Specifications Below) Approved Budget Cost: ₱2,906.00 / Pc 120 Pcs 1/2” Ø Hdpe Coupling Body: Polypropylene, High Grade Copolymer Split Ring: Acetal; Liner: Acetal, O-ring Fixed Inside; Seal: Nitrile Rubber Nbr Approved Budget Cost: ₱278.00 / Pc 40 Pcs 3/4” Ø Hdpe Coupling Body: Polypropylene, High Grade Copolymer Split Ring: Acetal; Liner: Acetal, O-ring Fixed Inside; Seal: Nitrile Rubber Nbr Approved Budget Cost: ₱196.00 / Pc 150 Pcs 1” Ø Hdpe Coupling Body: Polypropylene, High Grade Copolymer Split Ring: Acetal; Liner: Acetal, O-ring Fixed Inside; Seal: Nitrile Rubber Nbr Approved Budget Cost: ₱420.00 / Pc 13 Pcs 2” Ø Hdpe Female Coupling Adapter Body: Polypropylene, High Grade Copolymer Split Ring: Acetal; Liner: Acetal, O-ring Fixed Inside; Seal: Nitrile Rubber Nbr Approved Budget Cost: ₱1,347.00 / Pc 489 Pcs 1” Ø Hdpe Male Coupling Adapter Body: Polypropylene, High Grade Copolymer Split Ring: Acetal; Liner: Acetal, O-ring Fixed Inside; Seal: Nitrile Rubber Nbr Approved Budget Cost: ₱167.00 / Pc 126 Pcs 2” Ø Hdpe Male Coupling Adapter Body: Polypropylene, High Grade Copolymer Split Ring: Acetal; Liner: Acetal, O-ring Fixed Inside; Seal: Nitrile Rubber Nbr Approved Budget Cost: ₱1,089.00 / Pc 530 Pcs 1” Ø Hdpe Poly Bst Elbow Body – Polypropylene, High Grade Copolymer; Split Ring – Acetal; Seal – Nitrile Rubber Nbr Approved Budget Cost: ₱381.00 / Pc 3 Pcs Universal Tapper 8” X 2” (please See Complete Specifications Below) Approved Budget Cost: ₱5,909.90 / Pc 3 Pcs Universal Tapper 10” X 2” (please See Complete Specifications Below) Approved Budget Cost: ₱6,144.97 / Pc 3 Pcs Universal Tapper 12” X 2” (please See Complete Specifications Below) Approved Budget Cost: ₱6,378.65 / Pc X X X X X Ball Valve Specifications: -elements Of The Valve Should Be Free From Dirt, And There Should Not Be Any Dirt, Chip, Burrs, And Flakes Etc. Before Assembling. -the Threaded Parts Of The Socket Should Be Coated With Sealing Glue. -the Valve Should Not Present Block To The Circulation Of Closing And Opening, And It Should Be Flexible. -when The Valve Is Fully Open, The Degree Of The Body Axis And Ball Axis Should Be Less Than 3 Degrees. -seal Test Should Be Carried And Testing Pressure Should Not Be Less Than 0.6mpa. -the Valve Should Be Turned Off During Delivery. Materials Body: Cw617n; Bonnet: Cw617n Ball: Hpb57-3; Ball Seat: Ptfe Sm031 Stem: Hpb57-3; Handle: Hpb57-3 Elastic Cylindrical Pin: Stainless Steel Gate Valve (threaded) Specifications: Features: Brass Body, Non-rising Stem, Screw-over Bonnet, Threaded Ends Specifications: Nominal Pressure: Non-shock Working Pressure Max Working Pressure 150 Psi Fitting To Withstand Min. Working Pressure Of 1.00 Thread Shall Be Npt Water Way Shall Unobstructed When Fully Opened Material List Handwheel: Alloy / Packing Nut: Brass Bonnet: Brass / Stem: Brass Rod Wedge: Brass / Body: Brass Bonnet Gasket: Plastic / Packing: Teflon Universal Tapping Saddle Specifications: For All Kinds Of Pipe And Sizes Except Pe Pipe Tapping On Pa Adaptor Internally Threaded Threading To Bsp ½”, ¾”, And 1” Use: For Water And Neutral Liquids To Max. 70°c Maximum Working Pressure: 16 Bar Materials: Saddle Upper Part: Ductile Iron, Ggg-50, To Din 1693 (bs 2789 Grade 500-7) With Rubber Liner Stirrup (lower Part): Stainless Steel A2 Coating: Electro-statically Applied Epoxy Resin To Din 30677 – Internally And Externally; Stirrup Bushing: Stainless Steel 303; Adaptor: Polyamide Pa-11gf; Rubber Gasket: Nbr; Rubber Lining: Nbr; Bolts: Stainless Steel A2; Washer: Stainless Steel A2; Support Washer: Pe-hd Option: Bolt/washer: Stainless Steel A4; Adaptor: Blank (no Hole); Stirrup (lower Part): Other Brand Size / 100mm Band Width Note: Not To Be Awarded On A One (1) Lot Basis. This Is A Two (2) Envelope System: Envelope “a” To Contain The Following, Among Others: A) A Refundable Bid Bond In The Form Of Cash, Manager's Or Cashier's Check Equivalent To 2% Or A Surety Bond Callable On Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission Equivalent To 5% Of The Total Approved Budget Cost Is Required For A Total Purchase Bid Amount Of ₱50,000.00 And Above. Validity Of The Surety Bond Is 120 Days From The Date Of Opening Of Bids Or Bid Securing Declaration Regardless Of The Amount Of Bid; B) Terms Of Payment, Delivery, Warranty, Bid Validity, And Complete Specifications; C) Brochure/s (original); D) Proof Of Payment Of A Non-refundable Fee Of ₱5,000.00; Otherwise, Bids Shall Not Be Opened E) Certificate Of Authorized Distributorship / Dealership Issued By The Principal Supplier To The Participating Bidder (with Red Ribbon) If None Has Been Submitted To The Bac In Its Accreditation; ◦ For Bidders Who Have Principal Foreign Suppliers, The Bwd-bac Shall Accept An Apostilled Certificate Of Authorized Distributorship / Dealership Issued By A Competent Authority Of The Host Government In Lieu Of The Certificate Of Authorized Distributorship / Dealership (with Red Ribbon), Except For Non-contracting Countries To The Apostille Convention, Which Still Require The Red Ribbon Requirement. ◦ For Locally Produced/manufactured Products, Only A Certificate Of Authorized Distributorship / Dealership W/o Red Ribbon Is Required If Applicable; F) Iso Certificate Issued To The Principal Supplier/participating Bidder For The Offered Material Or Equipment Brand Name (if None Has Been Submitted To The Bac In Its Accreditation); G) International Certificate Of Warranty. Envelope “b” To Contain The Bid Cost Per Unit. Pre-bid Conference: 9:30am Via Zoom Application Meeting Id: 452 718 8447 Password: 9buvqr