City Of Baguio Tender

Description 5 Pcs 4” Ø Check Valve, Flange Type (please See Complete Specifications Below) Approved Budget Cost: ₱27,228.00 / Pc 15 Pcs 4” Ø Gate Valve, Flanged Type With Companion Steel Flanges And Bng (please See Complete Specifications Below) Approved Budget Cost: ₱27,479.00 / Pc 10 Pcs 2” Ø Air Release Valve (please See Complete Specifications Below) Approved Budget Cost: ₱27,527.00 / Pc 5 Pcs 3” Ø Check Valve, Flange Type (please See Complete Specifications Below) Approved Budget Cost: ₱23,355.00 / Pc 15 Pcs 3” Ø Gate Valve, Flanged Type With Companion Steel Flanges And Bng (please See Complete Specifications Below) Approved Budget Cost: ₱18,795.00 / Pc Swing Check Valve Flange Type Specifications: Resilient Seated With Closed Bushings Pressure Rating: Pn 16 Connections: Flanges Iso 7005 / Ansi 125lb / 150lb Hydraulic Test To Bs 5153:1974 (1991) / Api 598 Materials: Body, Bonnet And Hinge: Ductile Iron, Ggg-50, To Din 1693 (bs98 Grade 500-7) Coating: Electrostatically Applied Epoxy Resin To Din 30677 –internally And Externally Shaft: Stainless Steel Bonnet Gasket: Epdm Rubber Bushing: Brass, Dezincification Resistant Hexagon Bolt, Washer And Pin: Stainless Steel A2 Resilient Seated Disc: Epdm Rubber With Steel Insert Dimensions And Weight (approx.): Size / Dn Length (l) Mm Weight Kgs Dn100 (4”) 292 – 300 20.2 – 26 Dn80 (3”) 249 – 260 13.5 – 22 Gate Valve Flanged Type Specifications: Design Code: Hydraulic Test To Bs 5163 (din3230 / Din3352) Or Jis B2043, Din 3352, Awwa C509, Bs5163 Maximum Pressure: Pn16 Or 16 Bar Temperature Range: -20 To 160 Degrees Centigrade Face To Face: Bs 5163 Or Jis B2002, Din 3202-f5, Din 3202-f4, Ansi B16.10, Bs 5163 End Flange: En1092-2 (iso 7005-2) Or Jis B2212 10k, Din 2533 Pn 10/16, Ansi 150#, Bs4504 Pn 10/16 Tightness Test: Operating Torque Test Or Jis B2003, Din 3230, Awwa C509, Bs 6755 Materials: Body: Ductile Iron, Ggg-50 To Din 1693 (bs 2789 Grade 500-7) Or Ductile Iron Wedge: Ductile Iron (di) + Nbr Or Ductile Iron, Ggg-50, Core Fully Encapsulated With Epdm Rubber With Integral Wedge Nut Of Dezincification Resistant Brass, Cz 132 To Bs 2874 Wedge Nut: Brass Or Dezincification Resistant Brass Stem: Stainless Steel, Din X 20 Cr 13 Or Stainless Steel / Brass Bonnet Gasket: Epdm Rubber Or Epdm / Nbr Bonnet: Ductile Iron (di) Or Stainless Steel A2, Sealed With Hot Melt O-ring: Nbr Or Epdm / Nbr Stem Collar: Brass Gland Flange: Ductile Iron Or Ductile Iron Gjs-500-7 (ggg-50) Dustproof Ring: Nbr Or Epdm / Nbr Hex Nut: Cast Iron Overall Dimensions: Size / Dn Length (l) Mm Height (h) Mm Width Or D Mm Weight Kgs Dn100 (4”) 229 334-430 200-220 26-28 Dn80 (3”) 203 297-390 200 20-23 Combination Air Valves Specifications: Technical Specifications: A) The Valve Shall Consist Of Two Floats (the Bottom And The Upper Float), The Bottom Float Drops And Allowing The Trapped Air To Be Vented Through The Small Nozzle At The Center Of The Top Float. B) The Float Shall Have A Float Guide On Two Sides. C) The Valve Shall Be Made Of Cast Iron / Ductile Iron With Glass Reinforced Plastic (grp) Inner Body D) Float Body Shall Be Made Of Polypropylene And It Should Be Cylindrical / Trapezoid In Design I.b Parts Specification Of 2” Ø Combination Air Valves: Description Material Bonnet Pa6+30gf Cover D.i. Flanged Base D.i. Elbow Polypropylene Float Foam Pp Slider Pa6+30gf Seal Epdm Spacer Pom Auto Seal Epdm Flat Seal Epdm O-ring Nitrilic Rubber Id Plate Aluminum Screw Hex Sst Washer Sst Dimensions & Weights: 2” Ø Height (h) 259.50 Mm Width (w) 214 Mm Thread (d) 2” (bsp/npt) Nozzle Area (a) 12.85 Mm2 Total Width (l) - Drainage Diameter (e) 1 1⁄2” Bsp Kinetic Nozzle Area (k) 908 Mm Flange Iso 6/25 / Ansi 1 50 Weight 9 Kgs. X X X X X Note: Not To Be Awarded On A One (1) Lot Basis. This Is A Two (2) Envelope System: Envelope “a” To Contain The Following, Among Others: A) A Refundable Bid Bond In The Form Of Cash, Manager's Or Cashier's Check Equivalent To 2% Or A Surety Bond Callable On Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission Equivalent To 5% Of The Total Approved Budget Cost Is Required For A Total Purchase Bid Amount Of ₱50,000.00 And Above. Validity Of The Surety Bond Is 120 Days From The Date Of Opening Of Bids Or Bid Securing Declaration Regardless Of The Amount Of Bid; B) Terms Of Payment, Delivery, Warranty, Bid Validity, And Complete Specifications; C) Brochure/s (original); D) Proof Of Payment Of A Non-refundable Fee Of ₱5,000.00; Otherwise, Bids Shall Not Be Opened E) Certificate Of Authorized Distributorship / Dealership Issued By The Principal Supplier To The Participating Bidder (with Red Ribbon) If None Has Been Submitted To The Bac In Its Accreditation; ◦ For Bidders Who Have Principal Foreign Suppliers, The Bwd-bac Shall Accept An Apostilled Certificate Of Authorized Distributorship / Dealership Issued By A Competent Authority Of The Host Government In Lieu Of The Certificate Of Authorized Distributorship / Dealership (with Red Ribbon), Except For Non-contracting Countries To The Apostille Convention, Which Still Require The Red Ribbon Requirement. ◦ For Locally Produced/manufactured Products, Only A Certificate Of Authorized Distributorship / Dealership W/o Red Ribbon Is Required If Applicable; F) Iso Certificate Issued To The Principal Supplier/participating Bidder For The Offered Material Or Equipment Brand Name (if None Has Been Submitted To The Bac In Its Accreditation); G) International Certificate Of Warranty. Envelope “b” To Contain The Bid Cost Per Unit.