City Government Of Navotas Tender

Description Request For Quotations: Please Quote Your Best Offer For The Item/s Described Below, Subject To The Terms And Conditions Provided At The Dorsal Portion Of This Request For Quotation. Submit Your Quotation Duly Signed By You Or Your Duly Representative And Copies Of Eligibility Requirements (business Permit, Local/national Tax Clearance And Philgeps Certificate Of Registration) Not Later Than The Deadline For Submission. Items: Procurement For The Supply, Delivery And Installation Of Kitchen Equipment/fixtures Under The Philhealth Trust Fund For Various Capital Outlay (other Ppe) For The Use Of Navotas City Hospital Lot 1- Supply, Delivery And Installation Of Kitchen Equipment/fixtures 1 Lot Other Ppe - (kitchen Equipment) For Formula Room Supply And Delivery Of Stainless Steel-preparation Table With Plain Mid And Bottom Shelf (1 Unit) Dimensions: W: 1,200mm D: 700 Mm H: 850mm Bs: 150mm General Specification: - Supply And Delivery Of Stainless Steel Preparation Table With Plain Mid And Bottom Shelves With Backsplash At The Back - 16 Ga. 1.5mm Thick T-304 S.s. Top Plate, Standard 90° Deg. Bend Nosing 50mm Thk. - Back Splash On Two Sides (1-back And 1-right) 38mm Thick X 150mm Ht. - 19 Ga. 1.0mm Thick T-202 S.s. Plain Mid And Bottom Shelves 40mm Thick - 1.2mm Thick X 1" X 3" T-202 S.s. Rectangular Horizontal Stiffener - 1.2mm Thick X 2" X 2" T-202 S.s. Square Tubular Horizontal Stiffener For Square Tubular Leg Support - 1.2mm Thick X 1-1/2" X 1-1/2" T-202 S.s. Square Tubular Leg Support On Square Type Adjustable Bullet Feet Warranty: At Least One-year On Parts And Service. -supply, Delivery, And Installation Of 1-compartment Stainless Steel Sink Table With Filtered Water Faucet And Faucet For Hot And Cold Water With Tubular Bracing With Grease Trap (1 Unit) A. Stainless Steel Grease Trap 10 Gpm (4-chambers) Dimensions: W: 400 Mm D: 300 Mm H: 300 Mm General Specification: - 18 Ga. 1.2mm Thick T-202 S.s. Grease Trap Body With Partition Panel And Top Cover M With Rubber Gasket, Lock Set And Pre-fabricated Rod Handle - 21 Ga. 0.8mm Thick T-202 S.s. Removable Perforated Grease Filter - 1.2mm Thick X 2" Dia. T-202 S.s. Tubular Inlet And Outlet Connection B. 1-compartment Sink Table With Square Tubular Bracing Dimensions: W: 1,200 Mm D: 600 Mm H: 850mm Bs: 150mm General Specification: - 16 Ga. 1.5mm Thick T-304 S.s. 25mm High Depressed Top Plate, Standard 90° Bend Nosing 50mm Thick And Back Splash 38mm Thick X 150mm Ht. - 18 Ga. 1.2mm Thick T-304 S.s. Sink Bowl 550mml X 400mmw X 250mm Deep - 1.2mm Thick X 1" X 3" T-202 S.s. Rectangular Horizontal Stiffener - 1.2mm Thick X 1" X 2" T-202 S.s. Square Tubular Horizontal Stiffener For Square Tubular Leg Support - 1.2mm Thick X 1" X 1" T-202 S.s. Square Tubular Support Bracing - 1.2mm Thick X 1-1/2" X 1-1/2" T-202 S.s. Square Tubular Leg Support On Square ; Type Adjustable Bullet Feet Inclusion: - 1-set 4" Dia. Basket Strainer With Tail Piece - 1-set 1-1/2" Dia. Metal Chrome P-trap C. Deck Mount Single Pantry Faucet General Specification: - Deck Mounted Pantry Faucet - Lever Handles (specify Cold Or Hot) - Swing Nozzle With 10" (254mm) Lengths - G1/2" Male Shank - 1/2" Npt Eccentrice Flanged Female Inlets Add Ons: 1 Spare Deck Mount Single Pantry Faucet With Lever Handles For Hot And Cold Warranty: At Least One-year On Parts And Service. For Main Kitchen Supply, Delivery And Installation Of Wall Mounted Exhaust Hood Canopy (1 Unit) Dimensions: W: 3,000 Mm D: 1,050 Mm H: 510mm General Specification: - 19 Ga. 1.0mm Thick T-202 S.s. Frontal Fresh Air Panel, Hood Panel, Drain Gutter Side Panel, Back Panel, Interior Filter Divider, Fresh Air Pre-fabricated Movable Guiding Vane And Pre-fabricated Electrical Junction Box - 18 Ga. 1.2mm Thick T-304 S.s. Pre-fabricated Oil Cup And Fresh Air Louver Framing Inclusion: - 3-sets Vapor Proof Lamp With Fixtures, Glass And Cfl Light Bulb - 1-pc. On-off Control Switch - 6-pcs. S.s. Baffle Type Filter 500mml X 500mmw X 42mm Thick - Other Electrical Connections Warranty: At Least One-year On Parts And Service. -supply, Delivery And Installation Of 2-open Top High Pressure Burner With Plain Bottom Shelf Cuba Type (1 Unit) Dimensions: W: 1,200 Mm D: 760 Mm H: 760mm Bs: 250mm General Specification: - 16 Ga. 1.5mm Thick T-304 S.s. 38mm High Depressed Top Plate, Standard 90° Bend Nosing 50mm Thick And 1100mm X 50mm Drain Canal With 1-1/2" Dia. S.s. Tubular Outlet Connection - 18 Ga. 1.2mm Thick T-202 S.s. U-bend Drip Tray Guide Rail, Control Panel, Plain Bottom Shelf And Back Splash 50mm Thick X 250mm Ht. - 21 Ga. 0.8mm Thick T-301 S.s. 300mm High Apron Side Panel, Removable Drip Tray With Pre-fabricated Handle And Perforated Drain Canal Cover - 1.2mm Thick X 1" X 3" T-202 S.s. Rectangular Bottom Shelf Stiffener - 3/16" Thick X 1-1/2" X 1-1/2" M.s. Angular Top Plate And Burner Support - 1.5mm Thick X 1-1/2" X 1-1/2" T-202 Square Tubular Horizontal And Vertical Support On Square-type Adjustable Bullet Feet Inclusion: - 2-pcs. Cast-iron Chinese Top Crown Grates - Cuba Type Ltc-g47 480mm Dia. X 260mm - 2-sets High Pressure 2-ring Burner With Air Shutter, Lever Type High Pressure Valve With Manifold Line 200mm Dia. X 550mm - 2-pcs. Pilot Shut-off Valve Ap7-1 With Pilot Tip A73007 - Embedded On A 3/4" Dia. B.i. Gas Manifold Pipeline With Brass Fittings Warranty: At Least One-year On Parts And Service. -supply, Delivery And Installation Of 2-open Low Pressure Burner With Plain Bottom Shelf Range Type (1 Unit) Dimensions: W: 1,200 Mm D: 760 Mm H: 760mm Bs: 250mm General Specification: - 16 Ga. 1.5mm Thick T-304 S.s. 38mm High Depressed Top Plate, Standard 90° Bend Nosing 50mm Thick And 1100mm X 50mm Drain Canal With 1-1/2" Dia. S.s. Tubular Outlet Connection - 18 Ga. 1.2mm Thick T-202 S.s. U-bend Drip Tray Guide Rail, Control Panel, Plain Bottom Shelf And Backsplash 50mm Thick X 250mm Ht. - 20 Ga. 0.8mm Thick T-301 S.s. 300mm High Apron Side Panel, Removable Drip Tray With Pre-fabricated Handle And Perforated Drain Canal Cover - 1.2mm Thick X 1" X 3" T-202 S.s. Rectangular Bottom Shelf Stiffener - 3/16" Thick X 1-1/2" X 1-1/2" M.s. Angular Top Plate And Burner Support - 1.5mm Thick X 1-1/2" X 1-1/2" T-202 Square Tubular Horizontal And Vertical Support On Square-type Adjustable Bullet Feet Inclusion: - 2-pcs. Cast-iron Square Top Grates Ltc-g001c 430mm X 430mm - 2-sets Low Pressure Round 3-ring Burner Ltc-b13 With Air Shutter 315mm Dia. X 460mm - 4-sets Low Pressure Ar-19l1 1/4" N.p.t. Gas Valve With Knob - 2-pcs. Pilot Shut-off Valve Ap7-1 With Pilot Tip A73006 - Embedded On A 3/4" Dia. B.i. Gas Manifold Pipeline With Brass Fittings Warranty: At Least One-year On Parts And Service. -supply, Delivery, And Installation Of 1-compartment Stainless Steel Knee Pedal Hand Sink With Square Tubular Bracing (2 Units) Dimensions: W: 400 Mm D: 400 Mm H: 850 Mm Bs: 150 Mm General Specification: - 16 Ga. 1.5mm Thick T-304 S.s. 12mm High Depressed Top Plate With Inverted V-edged Nosing 50mm Thick And Back Splash 38mm Thick X 150mm Ht. - 18 Ga. 1.2mm Thick T-304 S.s. Sink Bowl 300mml X 275mmw X 250mm Deep - 1.2mm Thick X 1" X 3" T-202 S.s. Rectangular Horizontal Stiffener - 1.2mm Thick X 1" X 2" T-202 S.s. Square Tubular Horizontal Stiffener For Square Tubular Leg Support - 1.2mm Thick X 1" X 1" T-202 S.s. Square Tubular Support Bracing - 1.2mm Thick X 1-1/2" X 1-1/2" T-202 S.s. Square Tubular Leg Support On Square Type Adjustable Bullet Feet Inclusion: - 1-set 4" Dia. Basket Strainer With Tail Piece - 1-set 1-1/2" Dia. Metal Chrome P-trap - Cast Single Knee Valve - Single Lever Goose Neck Faucet Add Ons: - 1 Spare Cast Single Knee Valve A - 1 Spare Singel Lever Goose Neck Faucet Warranty: At Least One-year On Parts And Service. -supply And Delivery Of Stainless Steel 4-layered Square Tubular Utility Rack (slotted) (4-units) Dimensions: W: 1,000 Mm D: 500 Mm H: 1,520 Mm General Specification: - 18 Ga. 1.2mm Thick T-304 S.s. 4-layered Slotted Rack - 1.2mm Thick X 1-1/2" X 1-1/2" T-202 S.s. Square Tubular Leg Support On Square Type Adjustable Bullet Feet Warranty: At Least One-year On Parts And Service. -supply, Delivery, And Installation Of 2-compartment Stainless Steel Sink Table With Square Tubular Bracing, Deck Mount Double Pantry Faucet, Deck Mount Pre-rinse Unit And Stainless Steel Grease Trap 15gpm (4-chambers) A. Stainless Steel Grease Trap 10 Gpm (4-chambers) Dimensions: W: 500 Mm D: 400 Mm H: 300 Mm General Specification: - 18 Ga. 1.2mm Thick T-202 S.s. Grease Trap Body With Partition Panel And Top Cover M With Rubber Gasket, Lock Set And Pre-fabricated Rod Handle - 21 Ga. 0.8mm Thick T-202 S.s. Removable Perforated Grease Filter - 1.2mm Thick X 2" Dia. T-202 S.s. Tubular Inlet And Outlet Connection B. 2-compartment Dish Washing Sink Table With Square Tubular Bracing Dimensions: W: 2,300 Mm D: 700 Mm H: 850mm Bs: 150mm General Specification: - 16 Ga. 1.5mm Thick T-304 S.s. 25mm High Depressed Top Plate, Standard 90° Bend Nosing 50mm Thick, Sink Bowl 500mml X 500mmw X 350mm Deep And Back Splash 38mm Thick X 150mm Ht. - 1.2mm Thick X 1" X 3" T-202 S.s. Rectangular Horizontal Stiffener - 1.2mm Thick X 1" X 2" T-202 S.s. Square Tubular Horizontal Stiffener For Square Tubular Leg Support - 1.2mm Thick X 1" X 1" T-202 S.s. Square Tubular Support Bracing - 1.2mm Thick X 1-1/2" X 1-1/2" T-202 S.s. Square Tubular Leg Support On Square Type Adjustable Bullet Feet Inclusion: - 2-sets 4" Dia. Basket Strainer With Tail Piece - 2-sets 1-1/2" Dia. Metal Chrome P-trap C. Deck Mount Single Pantry Faucet General Specification: - Deck Mounted Pantry Faucet - Lever Handles (specify Cold Or Hot) - Swing Nozzle With 10" (254mm) Lengths - 8" (203mm) Centers - G1/2" Npt Eccentrice Flanged Female Inlets D. Deck Mount Pre-rinse Unit General Specification: - Deck Mounted Type - Heavy Duty Construction - 8" (203mm) Center Deck Mounted Type - 20" (510mm) Riser Brass Pipe - 44" (1118mm) Flexible Stainless Steel Hose, Santoprene Inner Pipe - Spray Valve - 6" (152mm) Wall Bracket - The Spray Valve Conforms To Ansi/astm F 2324-03 - Ideal For Food Service, Commercial Kitchens, Restaurants And Hotel Applications Add Ons: - 1 Spare Deck Mount Single Pantry Faucet - 1 Spare Deck Mount Pre-rinse Unit Warranty: At Least One-year On Parts And Service. -supply, Delivery, And Installation Of 2-compartment Stainless Steel Island Sink Table With Square Tubular Bracing, Deck Mount Single Pantry Faucet For Each Sink And Stainless Steel Grease Trap 15gpm (4-chambers) (1 Unit) A. Stainless Steel Grease Trap 10 Gpm (4-chambers) Dimensions: W: 500 Mm D: 400 Mm H: 300 Mm General Specification: - 18 Ga. 1.2mm Thick T-202 S.s. Grease Trap Body With Partition Panel And Top Cover M With Rubber Gasket, Lock Set And Pre-fabricated Rod Handle - 21 Ga. 0.8mm Thick T-202 S.s. Removable Perforated Grease Filter - 1.2mm Thick X 2" Dia. T-202 S.s. Tubular Inlet And Outlet Connection B. Deck Mount Single Pantry Faucet General Specification: - Deck Mounted Pantry Faucet - Lever Handles (specify Cold Or Hot) - Swing Nozzle With 10" (254mm) Lengths - G1/2" Male Shank - 1/2" Npt Eccentrice Flanged Female Inlets C. 2-compartment Island Type Sink Table With Square Tubular Bracing Dimensions: W: 2,000 Mm D: 600 Mm H: 850mm General Specification: - 16 Ga. 1.5mm Thick T-304 S.s. 25mm High Depressed Top Plate And Standard 90° Bend Nosing 50mm Thick - 18 Ga. 1.2mm Thick T-304 S.s. Sink Bowl 400mml X 400mmw X 250mm Deep - 1.2mm Thick X 1" X 3" T-202 S.s. Rectangular Horizontal Stiffener - 1.2mm Thick X 1" X 2" T-202 S.s. Square Tubular Horizontal Stiffener For Square Tubular Leg Support - 1.2mm Thick X 1" X 1" T-202 S.s. Square Tubular Support Bracing - 1.2mm Thick X 1-1/2" X 1-1/2" T-202 S.s. Square Tubular Leg Support On Square Type Adjustable Bullet Feet Inclusion: - 2-sets 4" Dia. Basket Strainer With Tail Piece - 2-sets 1-1/2" Dia. Metal Chrome P-trap Warranty: At Least One-year On Parts And Service. Abc:php780,000.00 Target Date: 30 Calendar Days Upon Receipt Of P.o (terms Of Reference Attached To The Pr) (please Secure Complete List And/or Rfq Form From Ms. Maricar E. Pablo, At 09676781263 Pauline Anne S. Sioco At 09338100230, And Roxette May P. Poblete At 0936-493-5632 Or Email Address: Procurement@navotas.gov.ph) Terms And Conditions: 1. Bidders Shall Provide Correct And Accurate Information Required. 2. Bidders May Quote For All The Items. 3. Price Quotation/s Must Be Valid For A Period Of Thirty (30) Days Calendar Days From The Date Of Submission. 4. Price Quotation/s, To Be Denominated In Philippine Peso Shall Include All Taxes, Duties And/or Levies Payable. 5. Quotations Exceeding The Approved Budget For The Contract Shall Be Rejected. 6. Delivery Period Expressed Merely In Days Or Working Days Shall Be Rejected. 7. Award Of Contract Shall Be Made To The Lowest Quotation (for Goods And Infrastructure) Or, The Highest Rated Offer (for Consulting Services) Which Complies With The Minimum Technical Specifications And Other Terms And Conditions Stated Herein. 8. Any Interlineations, Erasures Or Overwriting Shall Be Valid Only If They Are Signed Or Initiated By You Or Any Of Your Duly Authorized Representative/s. 9. The Item/s Shall Be Delivered As Indicated In The Approved Bac Resolution/purchase Order. 10. The Procuring Entity Concerned Shall Have The Right To Inspect And/or To Test The Goods To Confirm Their Conformity To The Technical Specifications. 11. Liquidated Damages Equivalent To One Tenth Of One Percent (0.001%) Of The Value Of The Goods Not Delivered Within The Prescribed Delivery Period Shall Be Imposed Per Day Of Delay. The City Government Of Navotas Shall Rescind The Contract Once The Cumulative Amount Of Liquidated Damages Reaches Ten Percent (10%) Of The Amount Of The Contract, Without Prejudice To Other Courses Of Action And Remedies Open To It. For The Committee Original Signed Atty. Joel Joselito D. Parong Bac Chairperson