Cars Tenders

Details: Description Invitation To Bid Bid No. B-430-2024 1. The Provincial Government Of Negros Oriental, Through Source Of Fund: General Fund Proper/responsibility Center:1999-365(24) Intends To Apply The Sum Of Nine Million Eight Hundred Thousand Seven Hundred One Pesos And 81/100 (php 9,800,701.81) Being The Approved Budget For The Contract (abc) To Payments Under The Contract To Hire Contractor To Provide Materials, Labor And Equipment For The “purchase And Installation Of Elevator For Hall Of Justice, Dumaguete City”. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Provincial Government Of Negros Oriental Now Invites Bids For The Above Procurement Project. Completion Of The Works Is Required 120 Calendar Days. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 4. Interested Bidders May Obtain Further Information From The Bac Secretariat And Inspect The Bidding Documents At The Address Given Below During Office Hours From 8:00am To 5:00pm (monday To Friday). Wilma D. Padilla Head, Bac Secretariat Bac Secretariat Office, Ground Floor, Convention Hotel, Capitol Area, Dumaguete City Telephone Number : (035) 225-111, Local 475 Or 475 / Telefax Number Of Bac Secretariat: (035) 226-3804 Email Address Of Bac Secretariat: Bac-secretariat@negor.gov.ph / Bac.secretariat.neg.or@gmail.com 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 20, 2024 To January 14, 2025 Up To 1:00 In The Afternoon From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Nine Thousand Five Hundred Pesos (php 9,500.00). 6. The Bids And Awards Committee Will Hold A Pre-bid Conference On December 30, 2024 At 2:00 In The Afternoon At The Bac Conference Room, Ground Floor, Convention Hotel, Capitol Area, Dumaguete City And/or Through Video Conferencing Or Webcasting Via Google Meet, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before January 14, 2025 At 1:00 In The Afternoon. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On January 14, 2025 At 1:30 In The Afternoon, Bac Conference Room, Ground Floor, Convention Hotel, Capitol Area, Dumaguete City At The Given Address Below. The Attendance Of The Prospective Bidders Or His/her Duly Representative Is Highly Encouraged. 10. Submitted Documents Without Proper Tabbing For All Copies (3 Envelopes) With Name Of The Document (not Letters Or Numbers) And Not Book Bounded (soft/hard) Is Automatically Disqualified. 11. All Interested Bidders Are Required To Submit An Affidavit Of Site Inspection Certified By The Provincial Engineer Before They Are Allowed To Get The Bidding Documents From The Bac Secretariat. 12. The Bac Of The Province Of Negros Oriental Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 13. For Further Information, Please Refer To: Engr. Andre M. Reyes Provincial Engineer’s Office Capitol Area, Dumaguete City Tel. No.: (035) 226-1982; Facsimile No.: (035) 226-1982 Email : Peonegor@yahoo.com.ph Arthur Fran P. Tolcidas Bac Chairman To Hire Contractor To Provide Materials, Labor And Equipment For The “purchase And Installation Of Elevator For Hall Of Justice, Dumaguete City" Which Includes The Following Scope Of Work: Item No. Item Of Work Quantity Unit I Construction Of Elevator Shaft 1 General Requirements A. Mobilization /demobilization 1 Lot B. Temporary Facility 1 Lot C. Occupational Safety & Health Program 1 Lot D. Signages 1 Lot 2 Site Preparation 1 Lot 3 Reinforced Concrete Works (elevator Pit) 1 Lot 4 Roofing Works 1 Lot 5 Structural Steel (elev. Shaft Framing) 1 Lot 6 Painting Works 1 Lot 7 Electrical Works 1 Lot 8 Forms & Scaffoldings 1 Lot 9 Glass Works 1 Lot Ii Purchase And Installation Of Elevator Includes: Design, Supply, Installation & Commissioning A .equipment Cost: -630 Kgs. Capacity, 1.0 M/s, 3 Floors, 3 Stops, 3 Opening Imported Equipments Including Tempered Glass And Accessories. -includes:duties, Brokerage, Delivery And Unloading At Site, Hauling At Site, Installation Price For Elevator Car & Tempered Glass Local Materials, Labor Test And Commissioning. Terms And Conditions: 1.imported Equipment From Plan/drawing Approval To Manufacturing, Shipments, Port Releasing & Delivery At Site Should Be Sixty (60) Days From The Date Of Purchased Order Approval. 2.project Management, Installations, Test & Commissioning, Local Materials, Delivery & Unloading Will Immediately Be Engaged And Mobilization Will Commence Upon The Arrival Of Equipment’s. 3.completion And Hand-over Will Be On Or Before One Hundred Twenty (120) Calendar Days From The Start Of Mobilization Including Start-up And Commissioning. 4.warranty Of Two (2) Years From The Date Of Turn-over. 5.a Service Center And Equipment Parts Should Be Available Within Negros Oriental. 6.technical Team Available Within 24 Hours Upon The Request Of The End User. 7.must Have Business Permit Within Negros Oriental. 8.businesscenter Should Be At Least 5 Years Of Existence Of The Province Of Negros Oriental. Contract Duration: 120 Calendar Days Abc:p9,800,701.81

Details: Title: Generalplanungsleistungen Zur Erweiterung Der Feuerwache Hilden, Inkl. Neubau Einer Parkpalette description: Leistungen Der Generalplanung (lph. 1-9) Für Die Erweiterung Der Feuerwache Hilden Und Den Neubau Einer Parkpalette Der Stadtwerke Hilden. Die Feuerwache In Hilden Liegt Auf Einem Ca. 6.250 M² Großen Grundstück In Hilden-mitte. An Der Südlichen Seite Des Grundstücks Befinden Sich Die Straße Am Feuerwehrhaus Und Hieran Angrenzend Der Hauptfriedhof Mit Ehrenfriedhof. An Der Östlichen Seite Stehen Wohngebäude In Direkter Nähe. Das Gebäude Der Stadtwerke Hilden Grenzt An Die Westliche Seite Des Bestehenden Baukörpers Mit Fahrzeughalle Der Feuerwache. An Der Nördlichen Seite Grenzt Das Grundstück An Grundstücke Der Katholischen Kirchengemeinde St. Josef Mit Krankenhaus Und Kita An. Die Flurstücke 1076, 1074, 1078 Und 1080 Sind Mit Der Kita Der Katholischen Kirchengemeinde St. Josef Bebaut. Gegenwärtig Läuft Die Abwicklung Des Kaufs Dieser Flurstücke Durch Die Stadt Hilden. Die Flurstücke Sind Somit Als Bestandteil Der Planungsbetrachtungen Zu Berücksichtigen. Bauliche Bestandssituation: Der Gesamte Gebäudekomplex Der Feuerwehr Besteht Aus Einem "altbau" Von 1957 Entlang Der Straße "am Feuerwehrhaus", Einer Fahrzeughalle Von 1957 Entlang Der Östlichen Grundstücksgrenze Zur Angrenzenden Wohnbebauung, Die Im Jahr 2010 Um Eine Waschhalle Und Eine Werkstatt Erweitert Wurde Und Einem "neubau" Aus Dem Jahr 2010 Entlang Der Westlichen Grundstücksgrenze Zu Den Angrenzenden Stadtwerken Hilden. Der Altbau Ist Ein Zweigeschossiges Gebäude, Welches Im Erdgeschoss Fahrzeughallen Mit Den Dazugehörigen Nebenräumen, Inkl. Dem Schwarz- Und Weißbereich, Sowie Einem Sportraum Abbildet. Im Obergeschoss Liegen Der Sitzungssaal, Ein Besprechungsraum Und Der Ruhebereich. Im Jahr 2010 Wurde Ein Neues Foyer Vor Dem Altbau Errichtet. Dieser Foyerbereich, Der Neben Dem Erschließenden Treppenhaus Mit Aufzugsanlage Auch Einen Direkten Zugang Zum Angrenzenden Gebäude Der Stadtwerke Hilden Aufweist, Ist Mit Der Umsetzung Der Gegenständlichen Erweiterungsmaßnahme Zwingend Zu Erhalten Bzw. In Identischer Funktion Nachzubilden. Der "neubau" Ist Ebenso Ein Zweigeschossiges Gebäude, Das An Der Westlichen Grenze Des Grundstücks Errichtet Wurde. Im Erdgeschoss Befinden Sich Weitere Fahrzeughallen. Im Obergeschoss Sind Sowohl Die Büros Der Feuerwehr Als Auch Eine Mensa Mit Küche Vorzufinden. Der "neubau" Ist Über Ein Treppenhaus Direkt Mit Dem Bestandsgebäude Verbunden. Durch Die Derzeitige Auslastung Und Die Sich Ändernden Anforderungen Der Arbeitsstättenrichtlinien Besteht Der Bedarf Nach Zusätzlichen Erweiterungsflächen, Die Durch Einfache Anbauten Bzw. Bauliche Erweiterungen Des Bestands Nicht Ohne Kompromisse Umzusetzen Sind. Zudem Werden Nach Einschätzung Der Bezirksregierung Düsseldorf Als Zuständige Aufsichtsbehörde Bauliche Lösungen Verlangt. Planungsziel: Es Soll Auf Den Zur Verfügung Stehenden Grundstücken Der Feuerwehr Und Der Angrenzenden Kita Eine Freie Beplanung Zur Umsetzung Des Vorliegenden Raumprogramms Unter Berücksichtigung Einer Möglichen Baulichen Modifikation (umbau / Aufstockung) Des Aktuellen "neubaus" Aus 2010 Erfolgen. Dabei Sollen Die Im Außenbereich Erforderlichen Stellplätze Für Berufsfeuerwehr, Freiwillige Feuerwehr Und Besucher, Inkl. Alarmstellplätze, Barrierefreie Stellplätze Und Fahrradstellplätze In Einem Autarken Parkhausgebäude Auf Dem Gelände Der Stadtwerke Hilden Realisiert Werden. Es Sind Bis Zu 4 Parkebenen Vorzusehen. Ebenerdig Sind Bürgernahe Dienste Wie Z. B. Ehubs, Car-sharing Und Ggf. Eine Radwerkstatt Angedacht. Die Dachfläche Sollte Nach Möglichkeit Für Die Aufstellung Von Pv-modulen Konzipiert Sein. Eine Machbarkeitsstudie Der Buddenberg Tauchmann Architekten Düsseldorf Vom 23.01.2024 Zur Unterbringung Der Stellplätze Wurde Im Vorfeld Im Auftrag Der Stadt Hilden Erstellt Und Ist Dieser Unterlage Zur Kenntnisnahme Beigefügt. Ein Verbindungsbauwerk Soll Die Parkpalette In Höhe Des 1. Obergeschosses Mit Dem Feuerwehrhaus Für Fußgänger Verbinden, Da Die Stadtwerke Hilden Als Betreiber Kritischer Infrastrukturen Hohen Auflagen Unterliegt, Ist Mit Der Planung Zu Gewährleisten, Dass Feuerwehr-einsatzkräfte Von Der Parkpalette Zum Feuerwehrhaus Gelangen, Ohne Das Gelände Der Stadtwerke Hilden Zu Betreten. Eine Eigene Zufahrt Zur Parkpalette Unterstützt Diesen Ansatz. Im Vorprojekt Wurde Ein Raumprogramm Durch Die Buddenberg Tauchmann Architekten Düsseldorf Im Auftrag Der Stadt Hilden Erstellt, Das Zur Weiteren Ausarbeitung Freigegeben Und Grundlage Dieser Leistungsbeschreibung Ist. Hauptaugenmerk Der Aufgabenstellung Liegt In Der Koordination Zur Umsetzung Der Baumaßnahme Unter Aufrechterhaltung Der Ständigen Einsatzfähigkeit Der Örtlichen Feuerwehr. Hierfür Sind Sachgerechte Bauabschnittsbildungen Vorzusehen. Zusammenfassend Sind Mit Der Gegenständlich Beschriebenen Maßnahme Folgende Leistungsbestandteile Zu Realisieren: - Neukonzipierung Und Neuplanung Der Feuerwehr Hilden Am Standort "am Feuerwehrhaus" - Vollständige Überplanung Der Grundstücke Der Feuerwehr Und Der Kita - Erhaltung Bzw. Übernahme Der Eingangssituation "foyer" Mit Treppenhaus, Aufzugs- Und Zugangssituation Zu Den Stadtwerken Hilden - Unabhängige 72-h- Notstromversorgung Für Die Gesamte Feuerwehr - Bildung Von Bauabschnitten / Bauphasen Und Interimslösungen Zur Umsetzung Der Maßnahme Unter Gewährleistung Der Ständigen Einsatzbereitschaft Der Feuerwehr Vor Ort - Planung Einer 4-geschossigen Nicht Öffentlichen Parkpalette Auf Dem Gelände Der Stadtwerke Mit Separater Zufahrt Zur Vermeidung Von Betriebsfremden Auf Dem Gelände Der Stadtwerke Hilden - Planung Eines Verbindungsbauwerks Zwischen Parkpalette Und Feuerwehrgebäude Auf Höhe Des 1. Obergeschosses ("fußgänger") - Planung Einer Sachgerechten Außenanlagenfläche Für Die Feuerwehr (ggf. Unter Berücksichtigung Eines Hubschrauberlandeplatzes). Die Gegenständlichen Planungsleistungen Werden In Der Form Einer Generalplanung Stufenweise Beauftragt.

Details: Welfare area (later Pohti) Establishing a Dynamic Purchasing System (dps = Dynamic Purchasing System) for Hospital Cards, Level Tables, Nu- and Dining Tables for Hospital Use and associated Supplements or Parts as well as Public Other Service. The dynamic purchasing system is in force from 19 June 2023 to 18 June 2009, duration of 72 months. The In Kilpailu Deposits of the Dynamic Procurement System will be transferred to Pohkaen from 19 June 2023. A candidate may apply for one or more. with a single application for injury. The candidate should notify the "Crih of the Acquis,", in which section the Candidate submits the application. “Dynamic Procurement System Divided in the Constitutional Phase (10) Inde.dent area. Parts can be added or reduced later with a separate itaics effect.", "Pä 1) Anesthetic carriage", "2nd area) Recovery carriers", "3th area) Multifunctional and Nursing Cars", "4th area) Treatment of Architecture and Requirements for Hospital Use", "5th area"

Details: Description Invitation To Bid The Nueva Ecija University Of Science And Technology (neust) Through The Bids And Awards Committee (bac) Will Conduct Early Procurement Activities (epa) For The Following Project Funded By Nep/gaa 2025 In Accordance With The Guidelines On The Implementation Of Epa. Interested Entities Are Hereby Invited To Bid For The Following: Name Of Project: Hospitality And Tourism Management Virtual-reality Laboratory Set/package Location: Neust Cabanatuan City Approved Budget For The Contract: Php5,500,000.00 Contract Duration: 90 Calendar Days Source Of Fund: Nep/gaa 2025 Cost Of Bidding Documents: Php10,000.00 Project Description: 1lot/package Item No. Item & Description Quantity Unit 1 Hospitality And Tourism Management Virtual-reality Laboratory Set/package A. 90 Pcs. Virtual Reality Device (head Goggles And Hand So) B. 3 Units 50 Inches 4k Led Smart - 4k Uhd - Smart Tv - Bluetooth Connectivity, Hdr, Wireless Connectivity C. 3 Units All-in-one Computer - Apple M4 Chip With 10-core Cpu, 10-core Gpu, 16-core Neural Engine - 24" 4.5k Retina Display² - Standard Glass - 16gb Unified Mem9ory 512gb Ssd Storage - Four Thunderbolt 4 Ports Gigabit Ethernet - Magic Mouse - Magic Keyboard With Touch Id - Us English D. Simulation Program Software • Hotel Operations And Services - Hotel Section / Department Familiarization - Hotel Room Housekeeping Procedure (cleaning And Bed Preparation) - Housekeeping Tools And Equipment Familiarization • Food And Beverage Operations And Services - Restaurant Section/department Familiarization - Bar Tools And Equipment Familiarization - Kitchen Tools And Equipment Familiarization - Bartending And Cocktail Mixing - Food Service Procedures • Tourism And Travel Management - Phase 1 O Philippine Virtual Tour & Tourism Destination (360 Vr Tour) O Wonders Of The World (famous International Tourism Destination) (360 Vr Tour) O Country Familiarization (map And Flag Of The World) O Philippine And Tourism Geography (map, Province, Capital, Municipality, Culture) - Phase 2 O Travel Booking Simulation (using Global Distribution System) O Travel Agency Facility Familiarization O In-flight Safety Demonstration And Familiarization (aircraft) O Cruise Ship Vessel Familiarization 1 Set 2 Global Distribution System (gds) With Hotel Property Management System (pms) – Package/set A. 3 Units – Server Computer - Processor: 1 X Intelâ® Xeonâ® E3-1220v3 Quad Core Processor (3.10ghz/80w) - Cache: 8mb L3 Cache - Memory: 4gbâ 1 X 4gb Ddr3-1333 Unbuffered Ecc Memory - Expansion Slots • 1 X Pcieâ® 3.0 X16 • 1 X Pcieâ® 2.0 X4 (x8 Connector) • 1 X Pcieâ® 2.0 X1 (x4 Connector) • 1 X Pci - Graphics: Intel Hd P4600 Graphics - Ethernet: Onboard Gigabit Lan (intel� 82576eb) - Power Supply: 500w 80 Plus Bronze Certified Efficient Fixed Power Supply - Storage: 1 X 500gb 3.5” Sata 7200rpm (up To 4 X 3.5” Sata Hdd) - Chassis Form Factor: Tower Chassis - Optical Drive: Dvd-rw - Dimensions: 180 (w) X 450 (d) X 358 (h) Mm (7.1 X 17.7 X 14.1 Inches) - Weight: 7.9- 12.4 Kg (17.4-27.3 Lbs.) - Os Support: Windows 11 Os 64 Bit - Security And Service Features • Chassis Intrusion Alert, • Admin/user Password, • Device Boot Control, • Power On Password, • Setup Password - Emissions Classification (emc) • Fcc (class B) Bsmi (class A) - Accessories: Keyboard And Mouse - Warranty: 3 Years Warranty On Parts, 1 Year On Labor, 1 Year On-site - Monitor: 20 Inches Led Monitor With Hdmi/ Vga Inputs A. Comprehensive Travel Distribution And Hotel Management Solution Software - Gds Core Features - Airline Reservations, Hotel Booking, Car Rentals, Ancillary Services, Payment Integration, And Customer Experience Enhancements. - Hotel Property Management System (pms) Features • Reservation And Front Desk Management O Dashboard For Reservations. O Room Availability And Rate Management. O Check-in/check-out Processing. Housekeeping Module O Task Updates For Housekeeping Staff. O Room Status Management (clean, Occupied, Out Of Service). Inventory And Revenue Management Dynamic Pricing Based On Demand And Seasonality. Room Inventory Distribution To Online Travel Agents (otas) And Gds Channels. • Customer Relationship Management (crm) Guest Profiles With History And Preferences. Automated Communication (confirmation Emails, Pre-arrival Messages). • Billing And Payments (mockup Payments Only) Integrated Billing For Services (room Stays, Minibar, Spa, Etc.). Secure Online And Offline Payment Options. Reporting And Analytics Customizable Reports (occupancy, Revenue, Guest Demographics). Business Insights For Demand Forecasting And Trend Analysis. Advanced Features For Gds + Pms Integration Unified Booking Engine: A Single Platform For Travel Agents To Book Hotels Channel Management: Automatic Synchronization Of Room Availability And Pricing Across Otas, Gds, And Direct Booking Channels. Software Specification Windows Executable Supports Windows 10 & 11 Unlimited Installations To Any Computer Software License Custom Developed For Neust Hrm, This Means That The Full Ownership Of This Application Or Software Will Be Neust Htm Updates Are Free For Up To 3 Years 1 Set 3 Point Of Sales Simulation For Retail And Restaurant Operations – Package/set A. 6 Units - Android Tablet Connectivity: Sim: Nano-sim, Esim - Cellular Model; Wifi Display: 8.7 Inches, 214.9 Cm2 (~81.7% Screen-to-body Ratio) Resolution: 800 X 1340 Pixels, 5:3 Ratio (~179 Ppi Density) Platform/ Os: Android 13, Upgradable To Android 14, One Ui 6.1 Chipset: Mediatek Helio G99 (6 Nm) Cpu: Octa-core (2x2.2 Ghz Cortex-a76 & 6x2.0 Ghz Cortex-a55) Gpu: Mali-g57 Mc2 Memory: Card Slot, Microsdxc (dedicated Slot) Internal: 128gb 8gb Ram A. 6 Units - Portable Bluetooth Receipt Printer Support Cash Drawer Drive Parallel, Serial, Usb, Lan Interface Optional Built-in Data Buffer(able To Receive New Data While Printing) Character Can Be Enlarged, Adjusted Line Spacing Left And Right Spacing, As Well As Bold And Underline Support Different Density Nv Bitmap Download And Printing Esc/pos Compatible, Setting Dip Switch To Choose Characters And Fonts Support Configuration Through Web Multiple Connect Printing Through Software Binding To Set Printer Identification Support International Language A. Pos Simulation And Training Software For Retail And Restaurant Operations Simulation Modules: -retail Operations: Barcode Scanning, Payment Processing (mock-up Cash, Card, Digital Wallets), Refunds, And Discounts. - Restaurant Operations: Table Ordering, Kitchen Communication, Split Bills, And Menu Updates. Interactive Dashboard: Real-time Analytics For Tracking Sales, Errors, And Performance Metrics During Training. Admin And Trainer Tools: Ability To Create Custom Scenarios, Define Learning Objectives, And Review Performance. Lifetime Ownership: No Recurring License Fees; Updates For Educational Purposes Included. Software Specification Android Application;supports Android 13 - 16 Operating Systems; Unlimited Installations To Any Android Tablet Device Software License Custom Developed For Neust Htm, This Means That The Full Ownership Of This Application Or Software Will Be Neust Htm Updates Are Free For Up To 3 Years 1 Set The Summary Of The Bidding Activities Is As Follows: Activities Schedule 1. Advertisement December 11-18, 2024 2. Issuance Of Bid Documents December 19, 2024 To January 3, 2025 3. Pre-bid Conference December 19, 2024, 2:30pm (via Zoom) 4. Deadline For Submission Of Bids (manual Submission) January 3, 2025, Until 5:00pm Bac Conference Room, Gen. Tinio (st.) Campus, Cabanatuan City 5. Opening Of Bids (face To Face) January 6, 2025, 9:00am Bac Conference Room, Gen. Tinio (st.) Campus, Cabanatuan City General Conditions: All Particulars To The Eligibility Statement And Screening, Bid Security, Performance Security, Pre-bidding Conference, Evaluation Of Bids, Post Qualification And Award Of Contract Shall Be Governed By The Pertinent Provisions Of R.a. 9184 And Its Implementing Rules And Regulations. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Business Organizations With At Least Sixty Percent (60%) Interest Or Ownership Of At Least 60% Of The Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Business Organizations Of A Country Where The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From December 19, 2024 To January 3, 2025 Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Pay The Applicable Fee For The Bidding Documents Not Later Than The Deadline For Submission Of Bids. Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before January 3, 2025, Until 5:00pm. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In The Pbd. Late Bids Shall Not Be Accepted. On The Last Day For The Submission Of Bids And No Prospective Bidder/s Submitted Its Bid Documents Or Only One (1) Bid Was Submitted For The Above-mentioned Project, The Same Is Deemed Extended Until January 10, 2025, 5:00 Pm. This Is To Protect The Interest Of The University And Full Opportunity For A Competitive Bidding May Be Achieved. The University Likewise Reserves The Right To Cause Extension Or Postponement Of The Filing Of Bids Should Similar Situation Arises. Bid Opening Shall Be On January 6, 2025, 9:00 Am At The Bac Conference Room, Gen. Tinio (st.) Campus, Cabanatuan City Unless Extended. Bids Will Be Opened In The Presence Of The Bidder Or His/her/its Duly Authorized Representative/s. Failure To Attend During The Opening Of Bids Shall Be Considered A Waiver On The Part Of The Bidder Who Likewise Waives His/her/its Right To Raise Questions During The Bidding Procedures. The Nueva Ecija University Of Science And Technology Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For More Information Concerning This Bidding, Please Contact The Following: Engr. Joel G. De Mesa Head, Bac Secretariat For Goods And Services Neust Gen. Tinio St., Cabanatuan City Email Address: Neust.bacsec@gmail.com Approved By: Dr. Honorato P. Panahon (sgd.) Bac Chairperson

Details: Description The Significant Times And Deadlines Of Procurement Activities Are Shown Below: 1. Receipt Of Lois From Prospective Bidders December 18-24, 2024 2. Issuance Of Bidding Document December 19-26, 2024 3. Pre Bid Conference N/a 4. Receipt Of Bids Not Later Than 10:00am / Opening Of Bids @ 10:00 Am January 06, 2025 5. Bid Evaluation January 07, 2025 6. Post Qualification / January 08, 2025 7. Approval Of Resolution/issuance Of Notice Of Award January 09, 2025 8. Contract Preparation And Signing January 10, 2025 9. Approval Of Contract By Higher Authority January 13, 2025 10. Issuance Of Notice To Proceed January 14, 2025 Agriculture Office 2 Ream Special Paper, A4, 200 Gsm, White, 100 Sheets 15 Box Coupon Bond, Legal 100 Pcs Ball Pen 2 Unit Dustpan, Big 4 Unit Trashcan With Cover, 32l Tall 2 Unit Walis Tambo, Heavy Duty, Xl 150 Unit Folder; Long 5 Set "universal Refill Dye Ink, Cymk 4, 100 Ml Compatible For Canon, Brother" 10 Bottle "universal Refill Dye Ink, Black, 100 Ml Compatible For Canon, Brother" 2 Unit Maintenance Box For Canon Pixma, Canon Mcf G04 1 Unit "toner Cartridge Xxl. Dcp-l2540dw, Premium Quality, 10,400 Pages" 1 Unit Drum Unit Kit, Compatible For Brother Dcp-l2540dw 5 Box Clip Back, 60 Mm, 6 Pcs/box 4 Box Clip Back, 51 Mm, 12 Pcs/box 4 Box Clip Back, 41 Mm, 12 Pcs/box 2 Bottle Dish Washing Liquid, 5l 3 Bottle Toilet Cleaner, 500 Ml 2 Bottle Muriatic Acid, 1 L 2 Gallon Zonrox Bleach 4 Pcs Sickle 2 Gallon Alcohol 1l 1 Pack Bathroom Tissue, 48 Rolls, Virgin Pulp, 2 Ply/300 Sheet 2 Box Fastener, Plastic Stac 10 Reams Book Paper 70 Gsm Long 10 Reams Book Paper A4 10 Reams Book Paper Short 5 Packs Quaff Glossy Paper Sticker 10s 5 Packs Quaff Glossy Paper 120 Gsm 2 Pcs Flash Drive 64 Gb 20 Pcs Diploma Holder A4 3 Pcs Stapler 3 Box Stapler Wire 3 Box Panda Ballpen 5 Box Flexstick Neo Smooth Ink Pen 12's 8 Pcs Brother Dcp-t710w Magenta, Yellow, Cyan, Black 1 Pc Brother Mfc-i27000w Carbon Ink 30 Pcs Correction Tape Wb8278 4 Packs Yellow Paper Manila Paper 5 Seet Per Pack 1 Pc Plastic Cover (roll) 48"x50m/roll 2.6 3 Pcs Green Cross 70% Isoprophyl Alcohol 500ml 2 Bottle Zip Dishwashing Liquid (4 Liters) 8 Pcs Pilot G-tec C4 Sign Pen, Black Red And Blue 2 Box Artline Whiteboard Marker (2blk, 2blue, 2red) 200 Pcs 100 Pcs Cream/ 100 Pcs Brown Folder Long 50 Pcs Brown Envelope Long 30 Pcs Masking Tape 1 Inch 20 Pcs Double Sided Tape 1 Inch 30 Pcs Scotch Tape 1 Inch 3 Pcs Packaging Tape 4 Pcs Record Book 300 Pages 5 Roll Garbage Bag 15 Pcs Scissors 3 Box Paper Fastener (colored) 20 Pcs Clearbook Long Folder 15 Pcs Clear Folder Long 20 Pcs Scotch Brite Sponge & Steel 25 Pcs Safeguard White (60g) 2 Pcs Pail With Bathroom Dipper 32 Pcs Detergent Bar (120g) 48 Packs Detergent Powder (65g) 12's 20 Packs Downy Antibac (12's) 1 Pc Spinning Mop 3 Bottle Insecticides Spray 3 Bottle Lysol Spray 170 Mg 2 Pcs Broom (1 Whisk And 1 Sweeping) 6 Pcs Rags 1 Pc Walis Pang Agiw 3 Gal Zonrox Floral/original 8 Packs Sanicare Tissue (12's) Osca 4 Box Bond Paper Legal (hard Copy) 2 Box Bond Paper A4 (hard Copy) 1 Box Bond Paper Short (hard Copy) 5 Bottle Black Epson Ink 003 3 Bottle Cyan Epson Ink 003 3 Bottle Magenta Epson Ink 003 3 Bottle Yellow Epson Ink 003 Tourism 3 Box Paper Clip 50mm 2 Box Ballpen 2 Box Stapler Wire 2 Box Bond Paper A4 Hard Copy Red 2 Box Bond Paper Long 2 Box Pencil 2 Box Signpen 2 Box Correction Tape 5 Bottle Hp Ink Black Gt53 4 Pcs Duct Tape 2"3 5 Pcs Thumbtacks 50 Pcs Folder Long 50 Pcs Folder Short 50 Pcs Letter Envelope 30 Pcs Brown Envelope Long 30 Pcs Brown Envelope Short 30 Pcs Expanded Envelope 3 Pax Highlighter Marker 3 Gal Alcohol 2 Bottles Glass Cleaner 20 Pcs Detergent (powder) 10 Pcs Laundry Soap (bar) 2 Pcs Walis Tingting 3 Pcs Walis Tambo 2 Pcs Timba 3 Pcs Diswashing Liquid 780ml 3 Pax Tissue Paper 11+1 Roll 3 Box Sponge 2 Bottles Mr. Muscle 2 Bottles Handwash Soap 3 Pcs Rugs 5 Pcs Albatross 2 Bottles Bowl Cleaner 1000ml 4 Pcs Trash Bin 5 Roll Garbage Bag Xl 1 Pcs Dustpan 2 Bottles Baygon Spray 2 Bottles Lysol Spray 510g 2 Liters Fabric Conditioner 800ml 5 Pair Rubber Hand Gloves 2 Bottles Muriatic Acid 1l 2 Pcs Rubber Matting 5mm 2 Pcs Toilet Pump Ruber 2 Pcs Steel Wool Administrator's Office 10 Box Paper Fastener 5 Packs Sticky Note 10 Box Staple Wire 3 Pcs Stamp Pad 10 Bottle Stamp Pad Ink (small) 5 Pcs Scotch Tape (1 Inch) 10 Pcs Hbw Correction Tape 10 Pcs Adhesive Glue Tape (hbw) 1 Pc Cutter 1 Pc Dater 5 Pcs Glue Stick Tech4ed 10 Packs Photopaper Glossy A4 Size 3 Reams Laminating Film Mlf-leg 250 25 Pcs Certificate Holder A4 Size 2 Pcs Scissors 5 Pcs Double Sided Tape (1/4 Inch) 5 Pcs Double Sided Tape (1 Inch) 3 Pcs Packaging Tape Transparent (2 Inches) 6 Pcs Scotch Tape (1 Inch) 2 Box Paper Clip Small 1 Pcs Panther Original Extension Cord With Surge Protector 6 Outlets With Individual Switch 1.75m Psp-0818 8 Pcs Seagull Clearbook Refillable 9427 Long 20 Sheets 27 Holes 8 Pcs Seagull Clearbook Refillable 9423 Short 20 Sheets 23 Holes 2 Bottles Contact Bond (rugby) 1 Pcs Toshiba Canvio Basic Portable External Hd 1 Tb 6 Pcs Epson 003 Magenta 6 Pcs Epson 003 Cyan 6 Pcs Epson 003 Yellow 6 Pcs Epson 003 Black Janitorial Supplies M.o 200 Pcs Broom Stick 50 Pcs Soft Broom 200 Pcs Sack 100 Pcs Powder Detergent 50 Pcs Soap Bar 60g 30 Pcs Hand Wash 30 Pcs Fabcon 20 Pcs Dishwashing Liquid 50 Pcs Zonrox 50 Pcs Albatross 100g 50 Pcs Toilet Cleaner 20 Pcs Muriatic Acid 100 Pcs Rugs 10 Pcs Hand Towel 25 Pcs Toilet Brush 10 Pcs Tabo/dipper 15 Pcs Timba/pail 20 Pcs Mop Head 2 Dozen Garbage Bag Medium 5 Dozen Garbage Bag Large 2 Dozen Garbage Bag Small 10 Pcs Scotch Bright Fome/sponge 15 Pcs Air Freshener 10 Pcs Car Freshener 5 Pcs Insect Spray 5 Pcs Tissue Box 10 Pcs Wipes Lcro 15 Reams Paper, Multicopy, 80 Gsm, Size:216 Mm X330 Mm (legal) 15 Reams Paper, Multicopy, 80 Gsm, Size:210 Mm X 297 Mm (a4) 2 Boxes Ballpen, Black, Pilot 5 Boxes Carbon Film, Legal, Excel 6 Gallon Alcohol, Ethyl, 68% - 70%, Gallon 3 Set Ink Cart, Epson T6641 Black, Cyan, Magenta, Yellow 3 Set Ink Cart, Epson 003 Black, Cyan, Magenta, Yellow 100 Pieces Envelope, Brown, Legal 1 Boxes Sign Pen, Needle Tip, Retractable, 0.7 Mm Needle Tip, Energel 2 Boxes Sign Pen, Black, Liquid /gel Ink, 0.7mm Needle Tip, Energel 1 Box Pencil, Lead/graphite, With Eraser 2 Boxes Ballpen (hbw) 1 Box Rubberband, Big, 350 G, Arrow 2 Pcs Broom (walis Tambo) 1 Box Paper Clip, 50 Mm, 100s/box 1 Boxes Staple Wire, Standard No. 35 2 Pcs Record Book, 500 Pages, Size: 214 Mm X 278 Mm Min 2 Pcs Record Book, 300 Pages, Size: 214 Mm X 278 Mm Min 1 Box Fastener, Plastic, Non Sharp Edges 2 Boxes Marker, Permanent Balck Bullet Type, Pilot 4 Packs Toilet Tissue Paper, 3 - Ply Per Dozen Sanicare 10 Rolls Tape, Masking 48 Mm 10 Rolls Tape, Transparent, 48 Mm 15 Rolls Tape, Transparent, 24 Mm 10 Rolls Tape, Double Sided, 24 Mm 10 Rolls Tape, Packaging, 48 Mm 2 Pcs Flash Drive, 64 Gb 1 Pc External Harddrive, 2tb 1 Packs Trash Bag, Black, 75 Ml Per Pack (2 Rolls) 1 Packs Battery, Size Aa, Per Pack (4s) 1 Pack Battery, Size Aaa, Per Pack (4s) 1 Box Push Pins, 5 Colors, 100 Pcs/box 6 Dozen Coffee, Great Taste Original, 3 In 1 Twin Pack 100 Pcs Paper Cup, 10 Oz, Disposable 1 Pack Coffee Stirrer, Wood, Individually Wrapped, 100/pack Lydo 8 Liter Mr. Muscle All Purpose Cleaner - Lavender 10 Pcs Mr. Muscle Toilet Bowl Cleaner (500 Ml) 10 Pcs Glade Automatic Primary - Lavender & Vanilla (269 Ml) 10 Pcs Glade Automatic Refill - Lavender & Vanilla (175) 1 Set Tornado Mop With Spin Dry Bucket 8 Pcs Baygon Multi Insect Killer - Water Based (600 Ml) 10 Pcs Ariel Powder Floral Passion (1.16 Kg) 5 Pcs Ariel Liquid Detergent Floral Passion 820g 10 Pcs Downy Antibac Fabric Conditioner Refill (690 Ml) 5 Pcs Zonrox Multi Surface Cleaner Floral Blast (900 Ml) 6 Pcs Zonrox Colorsafe (900 Ml) 6 Pcs Zonrox Bleach Lemon 10 Pcs Tender Love Aloe Vera Scent Cleansing Wipes 6 Pcs Femme Bathroom Tissue - 12 Rolls 8 Pcs Casino Femme Ethyl Alcohol 70% 500 Ml 6 Pcs Joy Dishwashing Liquid 6 Pcs Scotch Brite Sponge 10 Pcs Safeguard Liquid Handsoap Pure White (225 Ml) 8 Pcs Ariel Bar Detergent 125g 10 Pcs Splenda Furniture Polish 20 Roll Garbage Bag Xl 3 Pcs Scrub Brush 10 Pcs Glade Air Freshener Scented Gel Lavender Meo 20 Ream Hard Copy 80 Gsm A4 20 Ream Hard Copy 80 Gsm 8.5x13.5 10 Ream Hard Copy 80 Gsm A3 3 Ref . Bot. Canon Gi-790 Cyan 5 Ref . Bot. Epson 008 Magenta 5 Ref . Bot. Epson 008 Cyan 5 Ref . Bot. Epson 008 Yellow 5 Ref . Bot. Epson 008 Black 5 Pcs Correction Tape W/ Refill S.k Federation 1 Unit Canon Mega Tank Maxify Gx4070 4 Box Advance Book Legal 4 Box Advance Book A4 1 Unit 4 Layer Steel Cabinet 2 Set Canon Maxify Ink Gi-76 All Colour Dilg 1 Pc Table 2 Pcs Chairs 1 Box Coupon Bond (long) 1 Box Coupon Bond (a4) 2 Box Sign Pen Ball Pen 100 Pcs Folder (long) Comelec 30 Ream Coupon A4 24 Ream Coupon Legal 2 Box Blue Sign Pen 60 Pcs Black Ballpen 5 Box Blue Ballpen 3 Pcs Office Stapler 3 Pcs Office Scissor 10 Pcs Correction Tape 10 Box Staple Wire 5 Pcs Scotch Tape 5 Pcs Masking Tape 1 Pcs Trash Can Big 3 Pcs Table Organizer 5 Pcs Leather Big Rug 5 Box Paper Fastener 25 Pack Garbage Bag 8 Box Paper Clip 1 Unit Lifetime 6 Ft Office Table 2 Unit Office Chairs 1 Unit Durabox 5 Layers 1 Unit Epson Printer L121 2 Unit Usb Keyboard 2 Pcs Usb Wireless Mouse 3 Pcs Mouse Pad 2 Pcs Evolis Ribbon Color Ymcko 2 Ream Hard Copy Coupon Bond Long 1 Pcs Epson Ink Cartridge 103 Black Mswdo 2 Pcs Asahi Wallfan 26"

Details: The subject of the proceedings is the provision of vulcanization services in official vehicles used by the District Police Headquarters in Miechów. As part of the Subject of the Order, the Contractor undertakes to perform vulcanization services in company vehicles, i.e.: passenger cars (including SUVs) and commercial vehicles (including off-road vehicles), on wheels with aluminum and steel rims, as well as those with a tire pressure control system. Kolo. The scope of the service includes: - Comprehensive tire replacement, which should be understood as: removing the wheel from the vehicle, removing the tire from the rim, installing a tire appropriate to the season on the rim, equalizing the tire pressure and balancing the wheel mounted on the vehicle, installing the wheel on the vehicle, as well as If necessary, calibration of the wheel pressure sensor, - comprehensive replacement of complete wheels, which should be understood as: removing the wheel from the vehicle, equalizing the tire pressure and balancing the wheel that is to be mounted on the vehicle, installing the wheel on the vehicle, as well as if necessary Performing the Calibration of the Wheel Pressure Sensor, - wheel balancing, which should be understood as: removing the wheel from the vehicle, balancing the wheel, installing the wheel on the vehicle, - vulcanization repairs, which should be understood as: removing the wheel from the vehicle, repairing the damage (through, among others, patching) Tires, replacing valves, valves, sealing the rim seat), mounting the tire on the rim, equalizing the pressure, balancing the wheel and installing it on the vehicle, as well as, if necessary, calibrating the wheel pressure sensor. 4. The actual quantity and type of services provided will result from the actual needs of the Ordering Party. The Ordering Party reserves the right to increase the number of vulcanization repairs, but their total may not exceed the value specified in the contract. 5. The Ordering Party requires that the service point with technical facilities enabling the entire execution of the subject of the order be located within the administrative boundaries of the city of Miechów. 6. The Ordering Party will require the conclusion of an Agreement, the template of which constitutes Annex No. 2 to the Procedure. 7. The Ordering Party requires completing the Offer Form constituting Annex No. 1. Then, the completed Annex should be uploaded to the Purchasing Platform in the "attachments" tab, Add an Annex. 8. The Ordering Party reserves the right to resign from the subject of the order in the event that the amount allocated for the execution of the order is not fully covered by current police expenses, which will not constitute grounds for any claims on the part of the Contractor. In the Purchasing Platform Form, Enter the Gross Offer Value. Please submit all inquiries via the Purchasing Platform. In case of problems with submitting an offer, please contact the Eb2b Helpdesk - Contact in the footer of the website.

Details: Description Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-220 Bidding December 2, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Thirty (30) Calendar Days Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) 1 1 Lot Communications Equipment 2,200,000.00 6 Unit Base Radio, Ntc-type Approved Equipment, 136-174 Mhz Frequency Range, 50 Watts Maximum Output Power, Programmable To Ntc Assigned Frequency Specifications General A. Frequency Range - Uhf: 400-470mhz*; Vhf:136-174mhz B. Channel Capacity- 48 (16 Channels Per Zone) C. Zone Capacity - 3 D. Channel Spacing - 12.5/25khz E. Operating Voltage - 13.6 V ± 15% F. Current Drain - Standby: Around 0.3a Receive: < 1>1ghz G. Weight - 1100g H. Dimensions - 164 X 43 X150 Mm I. Frequency Stability - ±0.5 Ppm J. Antenna Impedance - 50ω Receiver A. Sensitivity - Analog: 0.3µv (12db Sinad); 0.22µv (typical) (12db Sinad); 0.4µv (20db Sinad) Digital: 0.3µv/bers5% B. Selectivity - Tia-603: 60db @ 12.5khz/ 70db @ 25khz Etsi: 60db @ 12.5khz/ 70db @ 25khz C. Intermodulation - Tia-603: 70db @ 12.5/25khz Etsi: 65db @ 12.5/25khz D. Spurious Response Rejection- Tia-603: 70db @ 12.5/25khz Etsi: 70db @ 12.5/25khz E. Blocking- Tia-603: 90db Etsi: 84db E. Hum And Noise- 40db @ 12.5khz; 45db @ 25khz F. Rated Audio Power Output- Internal (@ 16 Ohm Load): 4w External (@8 Ohm Load): 8w Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry Brgy., Baguio City, January 10, 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 1 Of 5 Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-220 Bidding December 2, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Thirty (30) Calendar Days Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) G. Max Audio Power Output - Internal (@16 Ohm Load): 6w External (@ 8ohm Load): 12w H. Rated Audio Distortion - ≤3% I. Audio Response - +1~-3db J. Conducted Spurious Emission - <-57dbm Transmitter A. Rf Power Output – Low Power Version: 1-25w (uhf/vhf) High Power Version: 5-45w (uhf) / 5-50w (vhf) B. Fm Modulation – 11kof3e @ 12.5khz; 16k0fe @ 25 Khz’ C. 4fsk Digital Modulation – 12.5khz Data Only: 7k60fxd 12.5khz Data & Voice:7k60fxw D. Conducted/radiated Emission - -36dbm<1ghz>1ghz E. Modulation Limiting- ±205khz @ 12.5khz F. Fm Hum & Noise- 40db @ 12.5khz 45db @ 25khz G. Adjacent Channel Power- 60db @ 12.5khz; 70db @ 25khz’ H. Audio Response- +1 ~ -3db I. Audio Distortion- ≤3% J. Digital Vocoder Type- Ambe+2™ Or Selp K. Digital Protocol- Etsi-tsi02 361-1, -2, -3 1 Lot Engineering Plans And Services (professional Fee) 30 Unit Handheld Radio (vhf), Ntc Type Approved Equipment, 136-174mhz Frequency Range, 5 Watts' Maximum Out-put Power, Programmable To Ntc Award Frequency. Accessories: 1. Belt Clip 2. Standard Desk Charger 3. Rubber Duck Antenna 4. Manual General: A. Frequency Range- Uhf: 400-470 Mhz, Vhf:136-174mhz B. Channel Capacity - 128 C. Zone Capacity - 8 D. Zone Channel - 16 E. Channel Spacing - 12.5khz/20kh/25khz F. Operating Voltage -7.4v G. Battery - 1500mah (standard); 2000mah (optional) H. Battery Life - (5/5/90 Duty Cycle, High Tx Power) - Analog: 12h (1500mah), 16h (2000mah) - Digital: 16h (1500mah), 21h (2000mah) I. Frequency Stability - ±0.5ppm J. Antennal Impedance - 50ω K. Weight (with Antenna & Battery) -230g L. Dimensions (h X W X D) - 115 X 55 X 295mm M. Display - 1.77 Inch Tft Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry Brgy., Baguio City, January 10, 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 2 Of 5 Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-220 Bidding December 2, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Thirty (30) Calendar Days Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) Receiver: A. Sensitivity - Digital: 0.18µv / Bers % Analog: 0.18µv(12db Sinad) B. Adjacent Channel Selectivity - Tia -603: 60db@12.5khz, 70db@20/25khz Etsi: 60db@12.5khz, 70db@20/25khz C. Intermodulation- Tia- 603:70db@12.5/20/25khz Etsi: 65db@12.5/20/25khz D.spurious Response Rejection- Tia -603: 70db@ 12.5/20/25khz Etsi: 70db@12.5/20/25khz E. Blocking - Tia -603:80db Etsi: 84db F. Hum And Noise- 40db@20khz, 45db@25khz G. Rated Audio Power Output - 1w H. Rated Audio Distortion - <3>1ghz E. Modulation Limiting - +2.5khz@12.5khz, +4.0khz@20khz, 15.0khz@25khz F. Fm Hum&noise - 40db@12.5khz, 43db@20khz, 45db@25khz G. Adjacent Channel Power- 60db@12.5khz, 70db@20/25khz H. Audio Response- +1 To -3db I. Audio Distorted - ≤% J. Digital Vocoder Type - Ambe +2™ Environmental: A. Operating Temperature - -30°~+60°c B. Storage Temperature - -40°c~+85°c C. Esd - Iec 61000-4.2 (level 4) ±8kv (contact); ±15kv(air) D. Dust And Water Intrusion - Iec60529-ip54 E. Humidity - Mil -std-810g F. Shock And Vibration - Mil-std-810g 1 Lot Installation Of Communication Equipment 1 Unit Mini Duplexer (vhf) -tuned To Working Frequency, 50 Watts 7 Unit Mobile Radio (vhf) - Ntc-approved Type (commercial), 50w, Programmable To Ntc Assigned Frequency Frequency Range 136-174 Mhz, With Magnetic Mount Mobile Antenna 6 Lot Ntc Permit To Purchase/possess And Radio Station License 6 (six) Units Base Radio 30 Lot Ntc Permit To Purchase/possess And Radio Station License For 30 (thirty) Units Handheld Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry Brgy., Baguio City, January 10, 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 3 Of 5 Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-220 Bidding December 2, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Thirty (30) Calendar Days Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) 1 Lot Ntc Permit To Purchase/possess And Radio Station License For 1 (one) Unit Repeater 7 Lot Ntc Permit To Purchase/possess And Radio Station License For 7 (seven) Mobile Radio 1 Lot Programming, Commissioning/propagation And Testing And Delivery (30 Days) Additional Requirements: * Provide A Network Diagram That Is Applicable To The Area * With History/experience In The Installation Of A Working Communication System In The Area *accredited With Ntc-car 1 Unit Repeater (vhf), Ntc-type Approved Equipment, 136-174 Mhz Frequency Range, 50 Watts Maximum Output Power, Programmable To Ntc Assigned Frequency. Specifications: General A. Frequency Range - Uhf 1: 400-470mhz; Uhf 2: 450-520mhz; Uhf 3: 350-400mhz; Vhf: 136-174 Mhz B. Channel Capacity - 16 C. Channel Spacing - 12.5khz/20khz/25 Khz D. Operating Voltage - 13.6v±15% E. Current Drain - Standby: ≤0.8a; Transmit:≤11a F. Frequency Stability - ± O.5ppm G. Antenna Impedance - 50ω H. Duty Cycle - 100% I. Dimensions (h X W X D) - 88 X 483 X 366 Mm J. Weight - 8.5 Kg K. Lcd Display - 220 X 176 Pixels, 262000 Colors; 2.0 Inch, 4 Rows Receiver A. Sensitivity - Analog: 0.28µv (12 Db Sinad); 0.22µv (typical) 12db Sinad) 0.4 Μv (20db Sinad) Digital: 0.3µv/ber5% B. Adjacent Channel Selectivity- Tia-603: 65db @ 12.5 Khz; 75 Db @20/25khz Etsi: 65 Db @ 12.5 Khz; 75 Db @ 20/25khz C. Intermodulation- Tia -603: 75db @ 12.5/20/25khz Etsi: 70db @ 12.5/20/25khz D. Spurious Response Rejection Tia-603: 80db @ 12.5/20/25khz Etsi: 80db @ 12.5/20/25khz E. Hum And Noise - 40db@ 12.5khz; 43db@20khz; 45db@25khz F. Rated Audio Power Output - 0.5w G. Rated Audio Distortion- ≤3% H. Audio Response - +1 ~ -3db I. Conducted Spurious Emission - <-57dbm Transmitter Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry Brgy., Baguio City, January 10, 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 4 Of 5 Republic Of The Philippines Bids And Awards Committee Baguio City (074) 300-6537/ (074)442-8795 Bid Form Cp No. 2024-220 Bidding December 2, 2024 Circular Proposal No. Date Prepared The City Government Of Baguio, Through Its Bids And Awards Committee Desires To Purchase The Articles Listed Below Thirty (30) Calendar Days Upon Receipt Of Contract Award. Item Qty Unit Particulars Abc (php) Unit Price Total (php) A. Rf Power Output - 5-50w B. Fm Modulation - 11k0f3e @ 12.5khz; 14k0f3e @ 20khz; 16k0f3e @ 25 Khz C. 45sk Digital Modulation - 12.5khz Data Only: 7k60fxd; 12.5khz Data And Voice:7k60fxw D. Conducted/radiated Emission - -36dbm ≤ 1ghz; -30dbm > 1ghz E. Modulation Limiting - ±2.5khz @ 12.5 Khz; ±4.0khz @ 20khz; ±5.0khz @ 25khz F. Fm Hum & Noise - 40db @ 12.5khz; 43db @ 20khz; 45db @ 25khz G. Adjacent Channel Power - 60db @ 12.5khz; 70db @ 20/25khz H. Audio Response - +1 ~ -3db I. Audio Distortion - ≤3% J. Digital Vocoder Type - Ambe +2™, Selp, Nvoc, Comm K. Digital Protocol - Etsi-ts102 361-1, -2-, -3 Environmental Specifications A. Operating Temperature - -30°c ~+60°c B. Storage Temperature - -40°c ~ +85°c Accessories: 1. 1 Unit Tx Antenna (2 Elements Of Variloop Antenna) Cut, Fold And Tuned To Ntc Tx Assigned Frequency 2. 1 Unit Rx Antenna (2 Elements Of Variloop Antenna) Cut, Fold And Tuned To Ntc Tx Frequency 3. 100 M Coax Cable Rg-8 (japan) 4. 4 Pcs. Pi-259 Connector (good Quality) 5. Regulated Power Supply (13.8 V Dc/30 Amp) 6. With Pt Mask Antenna And Repeater Cabinet This Is A Lot Bidding, Partial Bids Are Not Allowed Please Indicate Brands Of Offers And Attach Technical Brochures In The Eligibility And Technical Proposal Please Indicate Unit Prices Of Offers In The Financial Proposal Bidders Must Possess Valid Mayor's/business Permit With A Relevant Line Of Business In The Supply, Delivery And Installation Of Communications Equipment For Use Of Bfp Under Pr No. 2 Please Refer To Attached Bid Instruction For The Eligibility Requirements, Technical Proposal And Financial Proposal Format. Drop Your Documents In The Bidding Box Located At The City General Services Officel, City Hall, Baguio. The Opening Of Bids By The Bids And Awards Committee Shall Be At The Cdrrmc Bldg., Lower Rock Quarry Brgy., Baguio City, January 10, 2025 9:30 Am Coa Representative, Two (2) Observers From The Private Sector And Non-governmentagency As Well As Interested Bidders. Atty. Augustin P.laban Iii Chairperson, Bids & Awards Committee Please Read Conditions At The Back Hereof. Non-compliance Of Any Of The Provisions Thereof Will Invalidate One's Bid/quotation. Bidders Shall Fill The Blank Spaces Below. Respectfully Returned To The Bids And Awards Committee, Baguio, With The Prices Quoted. All Conditions Set At The Back Hereof Are Hereby Accepted. The Required Good Faith Deposit Is Hereby Enclosed In The Amount Of Php ______________________________________ In Cash, Check Or Surety Bond. My Business Is _________________________________________________ Which Is Licensed Under Business Permit No./ Mayor's Permit No.____________ Issued On ________________________________. My Nationality Is ________________________. Please Refer To The Bid Conditions At The Back Name Of Establishment Bidder's Signature Page 5 Of 5

Details: Nullkære Applys About Recording In Dynamic Purchasing System. Contracts Bydermed Welcome to the Dynamic Purchasing System About 305329, Dynamic Purchase System For Sale of Person Cars For Sorø Municipality. Where Your Company is Interested In order to stay in the Dynamic Purchasing System, the Online Registration in Eu-supply’s Web-based Appointment System Ctm is required to create Sig As User In the System, and When the Company First One Time is Designed, there is access to all Broadcasting System Ctm, also the Future. After registration Access To the Appointment material, you will find all questions that your Company Should reply to the Client A Description of the Documents that Must be submitted with the application. process offered I To Phaseer. 1. Phase I Application About Recording In the Dynamic Shopping System. Requests Where to stay in the course of the contract, and the Orderer will acknowledge the applicants who will comply with the Objective Claims. Application About Recording Sker Ved At Responded 1 week ago 2. Stages Is The Shopping The Dynamic Shop System. All Offers are included in the Dynamic Purchasing System Will Be Invited To surrender Offer, When Konkrete Ans coffee. A Invitation Will Be Sended With Up To Relay Offer Direct Via System For the Record Offersgivers, participation as an Offeror Should You Logge You In Eu-supply’s Web-based Appointment System Ctm. Then you will see the Dynamic Shopping System, and all the requirements you need to beResponded on, Samt De for Documents, which Must be delivered, To Get Started. When your company is to participate in one of the orders of orders.1. Log In System And click "Accept". Be aware that When You Tap You are not allowed to submit an application regarding participation, but have Merely accepted that You have Access to the application material.2. You can access the Documents for the Dynamic Shopping System. You can now answer the questions And attach to the documents that Is Specified.3. If you have a request for admission, you may be able to run the whole period of the Dynamic Shop System. This Dynamic Shop System Runs To the 2042-09-30 23:59:00, Local Time. Further information questions that the Offer, Quiets Via “ Offersor Questions and Answer”. Question Will be Anonymousized and submitted together with the answer to All Offersgivers. questions, No Vedicles the Offer, and As Not Wanted, Quiets Via “ Message”. Orderer reserves the right to request that Refer to the offeror to ask questions Via “ Offers Question and Answer”, If the question is provided. in case of Technical Questions For the Use of the System Contact Please Eu-supply Support on Phone +45 70208014 or Via Mail Dksupport@eu-supply.com. Question For Self-Accessories For Orderor Through the Message module in Eu-supply’s Web-based Broadcasting System Ctm. Answer Any Questions in connection with the recording. with Friendly Hilsendebbie Sørensen

Details: The Order Includes The Provision Of On-demand Traffic “emil Taunusstein” In Area Operations, Hereinafter Referred To As “odv”. In Terms Of Approval, This Corresponds To Regular Scheduled Traffic In Accordance With Section 44 Pbefg. This Involves A Demand-oriented, Timetable-independent Transport Of People By The Operator Using Passenger Cars Ordered In Advance By The Passengers And Without A Fixed Route Between Certain Entry And Exit Points In The Operating Area Determined By The Client. Operation Of All Virtual Stopping Points In The Control Area: Https://www.google.com/maps/d/0/viewer?mid=1lfx6h_jur7lubull1dfs4ayhsolmkps&femb=1&ll=50.1583023410848%2c8.1966926373&z=13 The Order Includes. . Driving Staff, Disposition And Depot, The Procurement And Maintenance Of The Vehicles, As Well As The Provision Of The Necessary Software. Passengers' Travel Requests Are To Be Served As Promptly And Efficiently As Possible. The Waiting Times Should Be As Short As Possible. Travel Requests Are Booked Via The App (see On-demand Software). In Addition, The Operator Also Accepts Travel Requests By Telephone During Operating Hours. The Requirements For The On-demand Software Can Be Seen In The Appendix “http://ausscription.igdb.de/rtv/20240105_funktionalitaeten_odv_software.pdf”. The Odv Is Operated At The Following Times: Monday To Thursday: 5:30 A.m. - 10:30 P.m. Friday: 5:30 A.m. - 12:30 A.m. Saturday: 7:30 A.m. - 12:30 A.m. Sunday And Public Holidays: 8:30 A.m. - 22 :30 P.m. During Operating Hours, One To Two Vehicles Are In Use At The Same Time. From The Distribution Of The Service Time In The System “http://ausschreib.igdb.de/rtv/20240103_mindestsoll_betriebsstunden_odv_2025.pdf” There Is An Expected Total Of 9,058 Operating Hours In A Standard Year (250 Days Monday To Friday, 52 Saturdays And 63 Sundays And Public Holidays). , Of Which 4,875 Are In Daytime Traffic And 4,183 Are In Late-night And Weekend Traffic. Requirements For The Vehicles: The Vehicle Fleet Consists Of At Least Three Battery-electric Minibuses Or Minivans With A Maximum Of Nine Seats (including Driver's Seat) Per Vehicle. In Each Vehicle There Are At Least Five And Up To Seven Passenger Seats In The Passenger Compartment. The Front Rows Of Seats In The Passenger Compartment Have A Maximum Of Two Seats And Only The Last Row Of Seats Has Up To Three Seats, So That It Is Possible To Climb Through To The Rear Without Folding Down The Seats. Passenger Seats Are Not Counted Or Used As Passenger Seats. At Least Two Of The Vehicles Have A Barrier-free Parking Space For Wheelchairs With Devices To Properly Secure Passengers. If The Wheelchair Space Is Used, The Number Of Additional Passenger Seats In The Vehicle May Be Temporarily Reduced To Three. All Vehicles Have A Step On The Side Door To Make It Easier For Passengers To Get In. The Common Conditions Of Carriage Of The Rhein-main-verkehrsverbund (gb-rmv) Apply On-demand Transport In The Rhine-main Transport Association Https://www.rmv.de/c/de/fahrkarten/infos-regelen/on-demand-verkehre-befoerderung-und-tarif.

Details: Description Republic Of The Philippines Province Of Camarines Norte Municipality Of Mercedes Bids And Awards Committee Bids And Awards Committee Office, Lgu - Mercedes, Camarines Norte Invitation To Bid For Purchase Of Various Supplies/materials And Equipment, Livelihood Program: Providing Resources For Opportunities And Prosperity Through Empowerment In Lgu-mercedes, Camarines Norte. The Local Government Unit Of Mercedes, Camarines Norte, Through The Trust Fund Intends To Apply The Sum Of Two Million Seven Hundred Twenty-five Thousand Two Hundred Sixty-six Pesos Only (php2,725,266.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Purchase Of Various Supplies/materials And Equipment, Livelihood Program: Providing Resources For Opportunities And Prosperity Through Empowerment In Lgu-mercedes, Camarines Norte - Identification Number 401-24-11-1495/1496/1497/1498/1499. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Local Government Unit Of Mercedes, Camarines Norte, Now Invites Bids For The Purchase Of Various Supplies/materials And Equipment, Livelihood Program: Providing Resources For Opportunities And Prosperity Through Empowerment In Lgu-mercedes, Camarines Norte As Follows: Item No. Qty Unit Description Lot 1 - Hardware Tools 1 1 Unit Air Compressor Machine, Motor: 1/2 Hp; No. Of Cylinder: 2; Phase: 1; Pressure: 85 Psi; Capacity 46 Liters; Approximate Dimension: 95-100cm (l) X 31-35cm (w) X 64-70cm (h); Weight: 47kg; Inflation Time: 53min; Air Displacement: 208l/min 2 1 Unit Air Spray Gun, Standard Nozzle:1.4mm, Pattern Width:180-250mm, Paint Capacity:600cc, Suitable For Finishing Coat, Optional Nozzle:1.3-2.5mm, Operating Pressure:2-3.5bar Air Cons:4.2-7.1cfm(119-200l/min)" 3 11 Set Angle Grinder Cutting Disk, 10 Pcs.per Set; Dimensions: Approx. 105mm (4") X 1.2mm (3/64"') X 16mm (5/8") 4 11 Unit Angle Grinder, Rated Input Power: 730w; Wheel Diameter: 4"; Rated Voltage: 220v; Frequency: 60hz; No Load Speed: 12,000 Rpm; Weight: Approximately 1.6kg; Grinding Spindle Thread: M10; Disc Diameter: 100mm X 1 X 16mm, Dimension: 298mm (l), 77mm (w), 102mm (h) 5 7 Pc Chipping Hammer, Item Weight: ‎atleast 13.8 Ounces; Product Dimensions: ‎11" (l) X 1" (w) X 7.5" (h); Material:, Genuine Leather Grip And Forged Steel 6 3 Set Circular Saw With Diamond Blade, 1400w, 185 Mm Blade, Spindle Lock With 24t Diamond Blade 7 3 Pc Claw Hammer, Head Weight: 16oz; Overall Weight: 17oz-23oz; Forged Steel Head; Smooth Face; Fiberglass Handle With Rubber Cushion; Overall Length: 12-14" 8 3 Pc Concrete Chisel, 10'' Forged Steel Chisel 9 3 Pc Crow Bar, 36" Long; Length Tolerance: +- 1/8; Forged Steel Carbon 10 1 Pc Electric Planer; Voltage: 220-240v; Input Power: 1050w; No Load Speed: 1600rpm; Planing Width And Depth: 82x3mm; Heavy Duty Aluminum Base; 11 1 Pc Framing Hammer, Handle Material: Alloy Steel; Item Dimensions: Approximately 16-17" (l) X 5.75-6" (w) X 1.5-2" (h); Item Weight: Atleast 1.4 Pounds 12 1 Unit Gasoline Marine 7hp Speed Type, Single Cylinder; 4 Stroke, Forced Air Cooling; Ohv Displacement (cc): 196 Compression Ratio: 8.5:1 Bore X Stroke (mm): 68x54 Min. Fuel Consumption;395/(kw.h) Valve Clearance: Input Valve: 0.10-0.15mm Idle Speed (rpm): 1400+-140 Max A.c. Output/rpm:3.8/3600 Noise Level:70db (a) Ignition System: Transistorize Magento Ignition Max Torque (n.m/rpm): 10.7/300 Starting System: Recoil Start (recoil Start/electric Starting) 13 10 Pc Hacksaw With Blade, Adjustable Aluminun Alloy Frame With Soft-grip Handle, 90" Adjustable Bladec Angle, 12 Inches (+/- 1/4") Bi-metal Hacksaw Blade, 24 Tpi 14 10 Unit Heavy Duty Corded Drill, Rated Input Power: 750w; Chuck Capacity: Upto 13mm; Drill Capacity: Metal (16mm), Wood (25mm), Masonry (12mm); Dimension: 268mm (l) X 69mm (w) X 192mm (h); Weight W/out Cable: Approximately 1.6-1.8 Kg; Spindle Collar Diameter Of 43 Mm 15 1 Pc Level, Box Beam Style, Material: Alluminum; Dimension: Approximately 24-24.5" (l) X 2-2.6" (w) X 1.2-1.5" (h); Weight: Atleast 0.8 Pounds 16 3 Pc Mashing Hammer, 3 Lb With Fiberglass Handle, Forged Steel Head 17 3 Pc Masonry Hammer, 800g Solid Rubber Head, Fiberglass Core And Bi-material Slip-resistant Handle, 18 3 Pc Masonry Hand Saw, 15" 380mm Carbon Steel 19 3 Pc Masonry Square, 24"x 16"aluminum, 1/8 '' Thick 20 3 Pc Mason's Level, 60cm Aluminum Reinforced Frame 21 3 Tube Mason's Line, #18 Braided Nylon, 500 Ft, 170 Lb Test 22 10 Set Metal Drill Bit Set, Material: High Speed Steel; 19pcs Per Set (1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm,7.5mm,8mm,8.5mm,9mm,9.5mm,10mm); Point Angle:118degree C; Standards: Din 338; Bit Geometry: Standard Twist Bit 23 8 Pc Meter Tape With Magnetic Hook, Blade Material: Nylon Coated Blade; Dimensions: 16ft (l) X 25mm (w) 24 7 Pc Mig Welding Pliers, Overall Length: Atleast 210mm; Material: High Carbon Steel; Handle Material: Thermoplastic Rubber 25 1 Unit Portable Hand Drill, Power Sourced: Battery Powered - 2pc 21 Volt 1500mah Lithium-ion Batteries; Maximum Rotational Speed: 1500 Rpm; Voltage: 21v; Amperage: 1.5 Amps; Chuck Size: 0.38"; Bit Heads Diameters: From 0.8mm - 10mm; Product Dimensions: ‎9.6" (l) X 2.1" (w) X 7.5" (h); Material: ‎plastic, Rubber, Metal; Item Dimensions: Approx. ‎9.6" (l) X 2.1" (w) X 7.5" (h); Item Weight: Atleast ‎2.5 Pounds; Item Torque: 330 Inch Pounds; Inclusions: 1x21 Volt Inspiritech Cordless Power Drill, 2x Rechargeable Battery, 1x English User Manual, 10x Self-drilling Drywall Anchors,10x Screwdriver Bits, 2x Double Ended Bits, 3x Drilling Bits, 1x Magnetic Extension Socket Bit Holder, 10x Anchors With Screws，1x One-hour Fast Charger, 1x Flexible Extension Shaft, 1x Carrying Bag 26 7 Unit Portable Welding Machine, Input Voltage: 220-240; Frequency: 50-60hz; Output Current: 10-220a; Led Display; No-load Voltage: 85v; Max. Output Current: 220a; Diameter Of Electrode: 1.6-3.2mm; Inclusions: 1 Pc Electrode Holder, 1 Pc Earth Clamp With Cable, 27 3 Pc Pull-push Rule, Blade Length 8m/26ft, Blade Width 1", High Impact Abs Case With Durable Rubber, Corrosion Resistant Tru-zero End 28 3 Pc Putty Knife, 3" Stainless Steel With Rubber Handle 29 1 Pc Roofing Hammer: Item Weight: ‎1.25 Pounds; Product Dimensions: Approx. 13.7" (l) X 6.75" (w) X 1.5" (h) 30 1 Unit Sander, Item Dimensions: Approx 11.63" (l) X 5.63" (w) X 6.19" (h); Voltage: 110 Volts; Power Source: Corded Electric; Amperage Capacity:‎ 8.8 Amps; Variable Speed Control Dial (690 -1,440 Ft./min.); Grit Number: 80; Item Weight: Atleast ‎9.5 Pounds; Included Components: ‎belt Sander, 1 Belt, Dust Bag 31 3 Pc Shovel, Rectangular End, Tempered Steel Blade (0.8mm Gauge Orv Higher), 17-23 Cm Blade Tip Width,22-28cm Blade Tip Lenght, All Metal Handle, Overall Lenght 100cm-115 Cm 32 3 Pc Shovel, Round End, Tempered Steel Blade (0.8mm Gauge Orv Higher), 17-23 Cm Blade Tip Width,22-28cm Blade Tip Lenght, All Metal Handle, Overall Lenght 100cm-115 Cm 33 1 Pc Speed Square, Material: Cast Aluminum; Size: About 18x18x2cm/7.09x7.09x0.79"; Weight: About 130g; Triangle-shaped 34 3 Pc Spirit Level Bar, Aluminum Frame With Magnet, Size 12" (+-1/8"), With 3 Vials (horizontal, Vertical And 45 Degrees) 35 3 Pc Steel Float/plastering Trowel, Thickness 0.7 Mm, Surface Measurement 280mm X 125 Mm(+/- 1mm), High Carbon Steel, Soliod Forged Steel With Plastic Handle 36 1 Pc Trim Hammer, Handle Material: Wood; Head Material: Alloy Steel; Item Dimensions Approximately: 14-15" (l) X 5-6"(w) X 1-2" (h); Item Weight: Atleast 594 Grams 37 3 Pc Trowel, 280x120mm Stainless Plastering Trowel With Plastic Handle 38 1 Pc Utility Knife, Handle Material: Aluminum; Material: Aluminum Alloy; Weight: 120g/pcs; Blade Size: 19mm (w) X 61mm (h) X 0.6mm (t); Blade Material: Steel; Thickness: Atleast 0.6mm 39 7 Pc Welding Helmet, Auto Darkening Helmet, Power Supply: Battery And Solar Powered; Light Shade: Din9-1;, Dark Shade: Din4; Switching Time: 1/25000s; Delay Time: 0.1-0.8s; Sensitivity Adjustment: Stepless Control; Operation Temperature: -5 Degrees- 55 Degrees; Active Viewing Area: 93mmx43mm; Active Viewing Area Size: (+/- 10mm); Item Weight: Atleast 1.85 Pounds; Package Dimensions: ‎approximately 12-12.4" (l) X 9-9.61" (w) X 7-7.68" (h) 40 7 Set Welding Magnets, 6 Pcs/set, Overall Length: Atleast (3"); Hold Capacity: Up To 25lbs; Arrow Design Supports Angle: 45°, 90°, And 135°; Item Weight: 295g; Package Dimensions: ‎4.88 X 4.72 X 3.98 Inches; ‎material: Steel; Magnets Size: Approximately - Top (1-1.4cm), Bottom (6.5-7cm), Side (7-7.5cm) Thickness (1-1.3cm) 41 1 Set Wood Chisel; 4-piece Set (6mm; 12mm; 19m; 25mm); Tempered Chrome Carbon Steel Blade; Hardened Shank; Rust-resistant, Lacquered Coated Blade; Bi-material Handle 42 3 Pc Wooden Float, 18"x 32", Multi-layered Lot 2 - Food Preparation 1 1 Unit 3 In 1 Burger Griller With Deep Fryer And Steamer, Gas Type; Made Of Stainless Steel And Polished Metal Griddle Plate; Dimensions: Burger Griddle - 18" (l) X 12" (w); Deep Fryer - 8" (l) X 12" (w), Capacity: 2.5 L; Steamer: 11" (l) X 12" (w) 2 6 Unit Barbeque Grill With Sauce Holder And Top Grill, Material: Stainless Steel, Dimension(lwh): 24 In X 12 In X 30 In (3.5 In Grill Pan's Depth) 3 33 Pc Basin; Stainless; Diameter: 22"; Base: 16"; Depth: 7"; Thickness: 1cm 4 47 Pc Beach Umbrella; Round-shaped; Material: Poly Canvass; Diameter: 40""; Pole Stand Length: At Least 45""; Pole Material: Stainless Steel Chrome" 5 6 Pc Boiler Caldero; Big Size & Heavy Duty; Size: Diameter 48cm; Height: 42cm; Makapal, Material: Aluminum 6 6 Pc Boning Knife, 27.3cm, Blade Length:14.6cm, Blade Thickness: 4mm, Wood Handle 7 32 Pc Butcher's Knife; Materials: Stainless; Wood Handle; Size: About 10" 8 29 Pc Caldero With Double Handle; Aluminum Material; Diameter: 46cm; Height: 37cm; With Double Handle; Capacity 5kilos/20l(volume Capacity) 9 48 Set Casserole Set, Stainless Steel, 28, 30 And 32cm Diameter; 16, 18, 20cm Height 10 50 Pc Chef's Knife; About 10 3/4" Long; Material: Stainless Steel; Blade: Full Tang; Riveted Handle 11 56 Pc Chest Cooler, Item Package Dimensions: ‎25.8" (l) X 16.2" (w) X 15.7" (h), Package Weight: ‎5.76kg, Inside Dimensions: 24.95" (l) X 14.58" (w) X 14.77" (h), Material: ‎plastic, Chamber Depth: 24.95", Capacity: 52l, Color: Any Color 12 51 Pc Chopping Board; Thick Wood; 12"x12" 13 6 Pc Cleaver Knife, 11" Stainless Steel, Weight: 310-340g, Blade Size: 6.5 Inches 14 48 Pc Colander; Stainless Steel; 11"diameter; With Stainless Base And Handle 15 6 Unit Digital Weighing Scale ,30kg Capacity,stainless Tray Size: 35x23cm For 30kg Capacity Weighing Scale, Dual - Display : Weight, Unit Price, Amount, High Light Led Display, Rechargeable Battery, Power Supply: Ac/dc Charger (included) 16 47 Unit Double Burner Gas Stove; Stainless Top And Front; Automatic Ignition; Reversible Trivet; Double Detachable Top Burner; Removable Drip Pan; Dimension: 700mm(l) X 390mm(w) X 140mm(h) 17 7 Unit Double Ring Burner; Heavy-duty Cast Iron; Includes Pol Regulator And 1-metre Hose 16750 Btu Brass Valve With Individual Gas Control Minimal Assembly Required Weight; 3.9kg, Material;cast Iron, Dimensions: (lwh) 36cm X 20cm X 9cm, Fuel Type: Lpg Tank Cylinder With Content And Accessories 18 2 Pc Egg Ring, Stainless Steel, 8.5cm Diameter, 1.5cm Height 19 4 Box Face Masks; 3 Ply Non-woven Disposable Earloop Mask; Quantity: 50pcs/box 20 30 Pc Fish Drying Rack, 4-layer, 45x45x66cm, Foldable 21 6 Pc Fish Scaler, 20cm Stainless Steel 22 6 Pc Fish Scraping Tool, 20cm Stainless Steel 23 54 Unit Food Shelve, 2 Layers: Glass Thickness: 3/16 And 1/4, (w-14" X H-17" X L-30"); Adjustable Layer, Material: Glass & Aluminum With Sliding Door, Offer: Screen Sliding Door To Prevent Moisture 24 204 Pc Food Tray With Glass And Stainless Lid/cover, Stainless Body, Rubberized Stand 32x28x10cm 25 12 Pc Food Tray, Flat, Stainless, 60x40x2cm, Depth: 2cm 26 2 Unit Freezer Chest Type, Gross / Net Volume 10.6 Cu.ft. (10 Liters) / 10.1 Cu.ft. (286 Liters), Functionality 3-in-1 Function – Chilling | Freezing | Fast Freezing, Defrosting System: Manual Defrost, Evaporator:aluminum Defrost,led: 6 Led’s, P:2w, Lamp Life: Min. 50,000 Hours, Weight 40 Kg, Dimensions L 63 X W 111.4 X H 84.7 (cm), Key Features: Inverter Compressor, Sliding Glass Door, Embossed Door & Cabinet, Recessed Side Handle (left & Right), Led Light, Removable Gasket , 1x Basket Wire Shelf, 4x Roller Wheel 27 5 Pc Fruit Crate Plastic 21 X 15 X 12 Inches, Heavy Duty Plastic Material, Color : Black 28 37 Pc Frying Pan 14" In Diameter, Cast Iron 29 4 Unit Gas Range, Approx. 55-70cm (l) X 50-60cm (w) X 86-93cm (h); 4-gas Burner; 62l Gas Oven; Button Ignition; Top Glass Lid; Net Weight: Maximum Of 28kg; Pan Support: Light Cast Iron Pan Support 30 1 Box Gloves; 100pcs; Food Grade; Size: Medium(7.5cm); Thermoplastic Elastomer(tpe) Material 31 23 Pc Hairnet With Cap; White; Nylon; Washable 32 1 Unit Industrial Oven Stainless Steel, With Wall Insulator To Minimize Penetration Of Heat To The Walls, With Temperature Gauge, Approx. Outer Dimension: 46.5 X 23.5 X 30 Inches; Oven Stand/rack Is Made Of Metal With Rollers And Braking Systems; Stainless Steel Front Panel, With See Thru Glass; About 4 Inch Thickness Of Walls With 2 Trays Per Deck - 4 Trays Capacity; Gas Type 33 35 Pc Kawa 62 Cm Diameter 18 Cm Height, Aluminum With 2 Aluminum Handles 34 12 Pc Kitchen Apron, Waterproof; Stain Resistant Leather Apron 35 6 Pc Kitchen Scissors, Material: Stainless Steel And Plastic Silicone, Size: 22.5x7.3x1.2cm 36 3 Pc Long Handle Stainless Steel Soup Spoon; Color: Silver; Caliber Length; Approx. 12cm.14cm.16cm.18cm, Handle Length; Approx.45cm(17.72inches) 37 6 Pc Long Wooden Ladle; 14" Stainless Steel 38 58 Set Lpg Tank, 11kg Cylinder With Gas Regulator, 1.8m Hose & Steel Hose Clamp 39 9 Set Measuring Cup (set For Liquid), 1 Measuring Cup With Red Graphics; Made Of Nonporous Glass That Won't Warp, Stain, Or Absorb Odors; Glass Is Preheated Oven, Microwave, Fridge, Freezer & Dishwasher Safe; Dimension: Approx. 7.13" (l) X 6.75" (w) X 4.38" (h); Measuring Capacity: 500ml 40 9 Set Measuring Cups (set For Dry), Smithcraft Stainless Steel Measuring Cups Set Have 8 Cups.the Sizes Are: 1 Cup (240ml), 3/4 Cup (180ml), 2/3 Cup (160ml), 1/2 Cup (120ml), 1/3 Cup (80ml), 1/4 Cup (60ml), 1/8 Cup (30ml), 1/16 Cup (15ml),1 Locking Ring. 41 6 Unit Mini Electric Fan 7.5" - With Base 10'' 69hz 20w (for Bbq), Non-adjustable Height; Any Color; Electric Powered Fan; 3 Blade 42 21 Pc Mixing Bowl Medium, Approx. Diameter: 28cm, Height:11.2cm; Material: Stainless; Capacity: Atleast 4l 43 200 Pc Monoblock Chair Front:monoblock Chair, Front Legs Distance: 355mm Width Seat, With Backrest, Color: Beige, Seat Width :375 Mm, Deapth: 330 Mm, Side Legs Distance Left: 378 Mm, Side Legs Distance Right 378 Mm, Back Legs Distance: 210 Mm, Back Rest Height:779 Mm, Set Back Height: 405 Mm, Seat Height: 376 Mm, Gross Weight: 2.25 Kgs 44 54 Pc Monoblock Table, 36x36 Inches, H- 28 Inches, Color: Beige, Atleast 3mm Thick 45 2 Pc Non-slip Rectangular Chopping Board; Materials:polypropylene Plastic; Approx Length: 40cm; Width: 25cm; Thickness: 0.5cm; Color : White 46 45 Pc Palamigan Container W/ Gripo 15l, Dimension: 31.8x23.8x48.5cm, Material: High Quality Durable Plastic 47 1 Unit Pressure Cooker 50 Liters Capacity, Aluminum Alloy Material, Pressure: 90kpa, Dimension: 44cm Diameter X 47cm Height 48 40 Pc Round Glass Jars With Lid, 220ml 49 41 Pc Sandok, Stainless Steel, 24.7" Length, With Wooden Handle 50 33 Pc Sandok, Stainless Steel, Length: 14" 51 39 Pc Shansi, Stainless Steel, Length: 14" 52 9 Pc Stainless Steel Dough Cutter Scraper Baking Smoother Cake , Approx. Size: 14-15cm (l) X 11.5-12cm (w) And 22cm (h); Material: Stainless Steel 53 41 Pc Stainless Steel Food Tong 14" Length 54 5 Unit Steamer; Aluminum; About 16"/42cm Diameter; 3 Layers With Cover; With Handle Per Layer 55 3 Unit Vacuum Sealer Machine, 220v, 90w, Sealing Width: 270mm, Power Supply: Ac100-240v/50-60hz, Temperature Control Range: 170-210 Celsius, Abs Material, Size: 370*75*50 (mm) 56 15 Pack Vacuum Sealer Storage Pouches | Bpa Free, Commercial Grade For Food Storage & Sous Vides, Size: 17 X 25cm Material: Plastic, 100pcs/pack 57 27 Pc Water Jug/dispenser With Faucet, 5 Gallons, 20 Liters, Color: Blue, Durable And High Quality Plastic Material 58 7 Unit Weighing Scale; Analog; 20kg Capacity; Approx. Dimensions: 6-7" (l); 8-9" (w); 10-11" (h); Dual Unit (kg And Pounds) 59 2 Pc Wide Mouth Funnel, Stainless Steel, Top Opening: At Least 17 X 5.5 X 6cm, Bottom Opening: At Least 13 X 3.7 X 4cm 60 8 Pc Wire Whisk, Large, Stainless, Approx. 14-15" (l) Lot 3 - Fabrication Of Food Cart 1 7 Unit Bicycle With Sidecar: Bicycle Specifications: Bmx Type Bike (frame 1//2 Gi Hd, Rim Set Front X 10 G Wide Jap Hub, Rim Set Rear X 10g Wide Jap Hub, Tire 20 X 2.125 Jumbo, Tube 20 X 2.125, Handle Bar Painted Black, Fork Ex-900 Landing Gear Cp, Head Parts Nikyo/whw, H-post Bmx Ord.m, H-grip Ord. Opc Parts Neco Bearing Type, Opc Plate 36t, Chain Cp Bmx, Freewheel 24t, Pedal Opc Bearing Type, Seat Clamp/s-pin/ S-post P, Saddle With Spring, Footbreak With Spring "full Size" Frame, 175-180mm Cranks Side Car With Provision Of Umbrella And 2 Chest Coolers (52l Capacity) - Dimensions: ‎25.8" (l) X 16.2" (w) X 15.7" (h) Materials: 1/2 J1 Pipe 540, 316 X 1 Flat Square Bar, J1 Pipe De Una 520, 1/4 X 2 Flat Bar, 6203 Gi Set, Tire 20 X 2.125 Jumbo, Note: With Dole, Dilp Logo Fully Painted In A Galvanized Sheet Iron Attached On The Front Of The Sidecar With Approx. 15.7 Inches(h)x15.7 Inches(l) Fully Painted Color: Any Color 2 1 Unit Motorcycle Sidecar (for Fruits And Vegetable Vending): Metal Body, Dimensions L-4ft W-2ft H-2ft, With 17inch Side Wheel 3 11 Unit Negocart With Bicycle Roofing Materials: Bolt & Nut W/ Washer 3/16 X 1 Polycarbonate 6mm X 1.2 X 1.70 Welding Rod Body Materials:tubular 1 X 1 X 1.5;flat Bar 1/8 X 1;flat Bar 2' X 3/8 X 1;plain G.i.;sheet 4' X 8' #26;cylindrical Hinge 1/2" ᴓ;blind Rivets 1/8 X 1/2;cylindrical 1/2;cabinet Handle;cabinet Lock;round Bar 8mm ᴓ;transparents Barrier 1/4 X 4' X 8';welding Rod;stainless Sheet 4' X 8';plain Round Bar 16mm ᴓ: Bicycle Specs: Bmx Type Bike Frame, Front And Rear Free Wheel Hub For Rim Set Single Speed (wheel Set), Tire Size (20"x2.125 Jumbo), Interior Tube (20"x2.125), Bmx Handle Bar, Bmx Fork, Head Parts (h Post, Handle Grip), Chain (single Speed), Pedal (bearing Type), Seat Clamp, Saddle With Spring, Foot Brake (clamp W/ Spring), Crank Pedals (175mm-180mm Cranks) Note: With Dole, Dilp Logo And Tourism Spot At The Front And Side Of Cart, Logo Material: Weather Proof Sticker, Sizes Of Sticker: H-60cm X W-130cm (for Front Of Cart) And H-60cm X W:75cm (for Side Of Cart) Or H-23.6" X W-51" And H-23.6" X W-29.5" Fully Painted Color: Light Blue Lot 4 - Grooming Tools 1 1 Pc All Purpose Comb, 7inch, Plastic Material 2 3 Pc Barber Apron, With Two Pockets, Waterproof, Material: Fiber Size: Approximately 89x69cm - 35x27.2 Inches 3 1 Pc Barber Cape, 140cmx100cm Silk, Waterproof 4 1 Unit Barber Chair, Reclining, Modern Style, Chair Back Height: High-back; Upholstery: Faux Leather; Material: Stainless Steel; Dimension: 21"x22.5"x38" 5 1 Unit Clipper, Cordless, Includes 3 Metal Clip Attachment Comb Cutting Guides, 1/16", 1/8",3/16, 6.25 Inches And Weighs 13 Oz, Equipped With A 2191 Adjustable 0000 Blade 6 2 Unit Curling Iron, 38.5cm, Tourmaline Ceramic, 25-39w, 360 Degree Rotatable 7 2 Set Eyebrow Grooming Kit, 6pcs (2 Eyebrow Razor, 1 Facial Razor, 1 Brush, 1 Scissors, 1 Tweezer) 8 1 Pc Fade Brush, Material: Plastic & Nylon, (hxw) 12.3 X 2.3 Cm, Weight: 0.015 Kg 9 2 Unit Flat Iron, Ceramic Wide Plate, 100-240v Dual Votage, 40-59w, 27.8cm Long 10 2 Unit Hair Blower, 2 Speed - 3 Heat Settings, 2400w, Removable Filter Cover, Cool Shut Function, Dimension: 21.5x8.5x26.5cm 11 1 Set Hair Clips, Plastic, Size: Approximately 7.8cm 12 2 Set Hair Dying Tool Set, (5-pc) Small Brush - 19.5cmx4.5cm, Big Brush - 20.5x6cm, Secondary Comb - 19x5.5cm, Small Bowl - 13x4.5cm, 1 Pair Of Earmuffs 8x4.5cm 13 3 Pc Hair Shear, 6.9 Inch Stainless 14 10 Pc Hair Towel Turban, 49x18cm Microfiber 15 2 Set Make Up Brush Kit, 12 Pcs With Box 16 2 Set Make Up Kit, 35pcs (1 Eyeshadow, 1 Concealer, 4 Osmetic Brush, 3 Lipgloss, 1 Eyebrow Pencil, 1 Pressed Powder, 4 Lipstick, 4 Face Makeup, 1 Lip Balm, 1 12.5cmx19cm Makeup Bag, 1 Eyebrow Cream, 1 Primer, 1 Powder Puff, 1 Mascara) 17 2 Pc Makeup Kit Organizer, 50cmx39.5cmx21.5cm, Black,046 Glittery, Checkered 18 1 Pc Mirror, Double Sided Folding Mirror, (wxh) 24x 37cm, Weight: 0.532 Kg 19 1 Pc Neck Duster, Weight : 100g , Size : 18x7x7cm 20 1 Roll Neck Strips, (28cmx6.5cm) Self Adhesive, Material: Paper 21 4 Set Plastic Hair Roller, 25mm Assorted, 10-pc Large 22 3 Pc Pomade, 80g, Water-based 23 1 Pack Razor Blades, Durable, Stainless, 100 Pcs, (lxwxh) 14x10x1 24 1 Set Shaver, Abs Material,110-220v, Power: 3w, Size: 16.6x5.8cm, Battery Capacity: 600mah 25 2 Pc Shaving Gel, 195g With Aloe 26 2 Pc Talc Powder, 500g 27 1 Set Trimmer, Rechargable, 2 Blades, Power: 50-60 Hz, Voltage:100-240v, Dimension: 11.5x6.5x3cm 28 4 Pc Wide-tooth Comb, 16cm Plastic, Durable 29 1 Pc Wide-tooth Comb, Size: Approximately 21.5x5 Cm, Plastic Material Lot 5 - Sewing 1 7 Set Ball Point Pins, 250 Pcs Per Box With 8 Colors; Durable 2 8 Unit Bobbin Case, Diameter: 20.3mm Width: 11.7mm 3 8 Pc Bobbin, Diameter: 20.3mm Width: 11.7mm 4 4 Set Dressmaker's Shears, Material: Stainless Steel; Item Dimensions: Approximately 0.8" (l) X 3.9" (w) X 10" (h); Blade Length: 8"; Item Weight: Approximately 8.8 Ounces 5 1 Pc Edging/ Overlock Sewing Machine, Metal Material; Overlocker; 1 Stitch; Dimension(lxwxh) 12x13x14 6 3 Pc Electric High Speed Sewing Machine, Power: 90w; Rated Voltage: 220v; Gross Weight: About 7kg; Max Sewing Speed: 1,100 Stiches/min; Materials: Stainless Steel Needle Plate, Metal Frame; Dimensions: Approximately 44cm (l) X 16cm (w) X 28cm (h); Voltage: 220v, Secondary Lifting Height Or Presser Foot: 14mm; Needle Pitch: From 0-4.5mm, Needle Width: From 0-7.0mm 7 4 Pc Flat Iron, 1200w; Stainless Steel Sole Plate; Power Light Indicator; With Steaming/spray Function 8 4 Set French Curve, Dimension(21.65x0.39x7.09); 4.6 Ounce; Made Of Aluminum Or Plastic 9 4 Pc L-square, Material: Stainless; Item Weight: 0.32oz; Product Dimensions: Approx. 14" (l) X 24" (w) 10 1 Pc Manual Sewing Machine With Motor And Foot Controller, Metal Material, Heavy Duty, 9kg Weight, 1 Stitch Dimensions, (lxwxh) 12x13x14 11 4 Unit Meter Stick, Yellow Color; Wood Type 12 4 Pc Needle Threader, Metal Material; Oval Shape; 1 Inch Size 13 31 Pack Sewing Machine Needle, Flat Needles 10pcs/pack 14 11 Pc Sewing Threads 12pcs/box, Material: Cotton; Package Dimensions: Approx. 5.71" (l) X 3.74" (w) X 2.36" (h); Thread Size: Approx. 56mm (h) X 22mm (w); 550 Yards Each Roll 15 25 Pc Tailor’s Chalk, Square Shape; Orange Color;fades Or Brushes Away Easily 16 4 Pc Tape Measure, Material: Durable Soft Plastic; Color: Blue; Measurements: Inches (can Measure Upto 60") And Centimetres (can Measure Upto 150cm) Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 2. Delivery Of The Goods Is Required Ninety (90) Calendar Days Delivery Period And Upon Receipt Of Notice To Proceed And Purchase. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Interested Bidders May Obtain Further Information From Local Government Unit Of Mercedes, Camarines Norte-bac Secretariat And Inspect The Bidding Documents At The Address Given Below During Office Hours - 8:00 Am-12:00 To 1:00 Pm-5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 14, 2024 Until 8:30 Am Of January 6, 2025 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos Only Php5,000.00. 6. The Local Government Unit Of Mercedes, Camarines Norte Will Hold A Pre-bid Conference On December 23, 2024 9:00am At Bids And Awards Committee Office- Second Floor Jpl Sports Complex - Municipal Compound, Eco Avenue Street, Barangay 5, Mercedes, Camarines Norte Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through (i) Manual Submission At The Office Address Indicated Below, On Or Before 8:30am January 6, 2025. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On 9:00 Am Of January 6, 2025 At The Bids And Awards Committee Office- Second Floor Jpl Sports Complex - Municipal Compound, Eco Avenue Street, Barangay 5, Mercedes, Camarines Norte. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 10. The Local Government Unit Of Mercedes, Camarines Norte, Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Macario B. Totanes Municipal Planning And Development Office Lgu Mercedes Municipal Compound, Barangay 5, Mercedes, Camarines Norte 0998-576-8321 Arsenia M. Ordiales Bac Secretariat Bids And Awards Committee Office 2nd Floor Jpl Sports Complex, Lgu Mercedes Municipal Compound, Barangay 5, Mercedes, Camarines Norte 0908-896-9684 Email Address: Lgubac.mercedes@yahoo.com 12. You May Visit The Website: For Downloading Of Bidding Documents: Www.mercedes.gov.ph December 13, 2024 ________________________________ Macario B. Totanes Bac Chairman