Cable Tenders

Details: Description Procurement Of Various Equipments For The Enhancement Of Medical Services Of Ospital Ng Malabon 1. The City Government Of Malabon, Through The Malasakit Fund Intends To Apply The Sum Of Thirty Million Pesos Only (p 30,00,000.00), Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Procurement Of Various Equipments For The Enhancement Of Medical Services Of Ospital Ng Malabon. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The City Government Of Malabon Now Invites Bids From Eligible Bidders For Procurement Of Various Equipments For The Enhancement Of Medical Services Of Ospital Ng Malabon. Delivery Of Goods Is Required Within The Period Specified Under Section Vi. Schedule Of Requirements. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act 9184 (r.a. 9184), Otherwise Known As The “government Procurement Reform Act,” And Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To R.a. 5183 And Subject To Commonwealth Act 138. 4. Interested Bidders May Obtain Further Information From The Bids And Awards Committee Secretariat And Inspect The Bidding Documents At The Address Given Below From December 19 – January 8, 2025; 8:00 A.m. To 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders From The Address Below And Upon Payment Of A Non-refundable Fee In The Amount Of Twenty Five Thousand Pesos (p 25, 000. 00). 6. The City Government Of Malabon Will Hold A Pre-bid Conference On December 27, 2024 (friday); 2:00 P.m. At The Bac Conference, 8th Floor Malabon City Hall, F. Sevilla Blvd., Malabon City. 7. Bids Must Be Delivered To The Address Below On Or Before January 8, 2025 (wednesday); 12:00 N.n. All Bids Must Be Accompanied By A Bid Securing Declaration Or Bid Security In Any Of The Acceptable Forms Set In The Amount Stated In Itb Clause 18. 8. Bid Opening Shall Be On January 8, 2025 (wednesday); 2:00 P.m. At The Bac Conference, 8th Floor Malabon City Hall, F. Sevilla Blvd., Malabon City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 9. The City Government Of Malabon Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. For Further Information Please Refer To: (originally Signed) Florlinda Ayroso Head- Bac Secretariat (originally Signed) Mr. Alexander T. Rosete Chairperson - Bids And Awards Committee 1 Unit Automated Identification/anticrobial Sensitivity Testing Machine Weight: 15/30/60 75 Kg/105 Lbs Electrical Power Requirements: • 110/120 Vac (50-60 Hz) • 220/240 Vac (50-60 Hz) Heat Dissipated: 1025 Btu/hr (nominal) Environmental Requirements: • Operating Ambient Temperature Range: 15 Degrees Celsius To 30 Degree Celsius (59 Degree F-86 Degree F) • Operating Humidity Range: 20% To 80% Relative Humidity, Non-condensing Altitude: Up To 2000 Meters Note: Should Be Compatible With Bact/alert Culture Machine 1 Unit Gel Card Laboratory Centrifuge And Incubator For Crossmatching Laboratory Centrifuge Microprocessor Controlled Touch Panel Digital Display Dc Brushless Low-noise Motor Shock Absorber For Reducing Vibration Damping And Automatic Balance Technical Specification: Model: Invitrocent Ref 00710 Max Speed:4000rpm Max Rcf: 1640 X G Max Capacity: 24 Invitrogel Cards Speed Accuracy: + 50rpm. Time Setting Range: 1~99 Min. Power Supply: ~22ov + 10% 60hz 5a Noise: < 65db (a) Dimension: (wxdxh) 370mmx432mmx260mm Package Dimension 570mmx425mmx305mm Weight: Gw; 16.5 Kg; Nw: 15kg Environment Requirements Temperature: 10°c~35°c Laboratory Incubator Microprocessor-controlled High-performance Incubator Accommodates Up To 24 Gel Cards Technical Data: Model: Invitrotherm; Ref0097020 Power Supply: Ac220v+ 50hs-60hz Fuse: 250v 3a 5x20 Temperature Range 35°c ~50°c Accuracy Of The Temperature < + 0.5 Heating Time: (from 20°c To 37°c Min Timing Range 1sec~99min 59sec Display Accuracy: 0.1°c Ambient Temperature: 5°c~30°c Dimensions (wxdxh): 280mm X 380mm X 115mm Weight 6.0kg 1 Unit Immuno-analyzer Throughout: Up To 180 Tests/hour, Measurement Principle: Micron Super Paramagnetic Particles Platform With Alkaline Phosphatase (alp) Labeled Reagents And Amppd Substrate Sample Assembly: Sample Feeder: Continuous Sample Loading And Offloading, Sample Positions: 50, Sample Probe: Steel Probe, Liquid Level Detection, Cl;ot Detection, Horizontal And Vertical Collision Protection, Sample Volume: 10-200ul, With Increment Of 1ul Reagents Assembly: Reagent Disk: 15 Reagent Positions, Continuous Loading, Real-tome Mixing For Magnetic Particles, Cooling System: 2-8'c, Reagent Pack: 50 Tests/pack, 100 Tests/pack, Reagent Scanning:built-in/external Bar Code Reader, Reagent Probe:steel Probe, Liquid Level Detection, Clot Detection, Horizontal And Vertical Collision Protection, Reagent Volume: 10-200ul, With Increment Of 1ul Substrate System: Substrate Bottle: 300/500 Tests Per Bottle, Bottom Piercing, Substrate Loading"patients Who Fail To Arrive For A Scheduled Appointment Will No Longer Receive The Free Thyroid Check-up.: Capable Of Continuous Loading During Testing, Substrate Heating: Constant Heating, Aspiration Volume: 200ul Magnetic Separation Unit: Separation Assembly: 3-phase Magnetic Separation, Temperature: Accuracy: 37+0.3'c Measurement And Reaction System: Detection Mode: Photon Counting, Signal Detector: Photom Multiple (pmt) Photo Counter, Pmt Calibration: Led Reference Module, Incubation Positions: 82, Temperature: Accuracy:37+0.3'c, Mixing Unit: Non-touch Vortexer Mixing Cuvette Loading And Waste Collection: 1 Unit Abg Machine Throughout: Results In 1 Minute After Sample Aspiration Sample Volume:140jul Quality Control: 3 Or 5 Levels Qc, External Electronic Simulator Display: 7-inch Color Lcd Display, 800*480 Interface: 4 X Usb 2.0 Host, 1 X Rs232, Wlan Input Device: Touch Screen And Bar Code Scanner Power Supply: 100-240vac, 50/60hz Battery: 500mah Rechargeable Lithium-ion Battery, 50 Samples Continuous Testing Dimensions (w*h*d): 283*153*310 Mm Weight: 3.65 Kg Operation Environment: 10 C-31 C; %rh: 25%-80%; 70-106.6 Kpa 1 Unit Bpap Machine Ipap/epap: 4-40cm H20/4-25cm H20 • Ventilation Modes: Capap, S, S/t, Pc, T • Target Tidal Volume: 200-1500ml • Breath Rate: 0-40bpm • With Good Humidification System • Alarms For: Patient Disconnection, Apnea, Low Minute Ventilation, Low Tidal Volume, And High Respiratory Rate • Monitoring For: Pressure, Tidal Volume, Minute Ventilation, Respiration Rate, Leak • Filters: Foam And Optional Ultra-fine Filters • Data Management: Encore Pro2 And Direct View Software Compatible With Oximetry Module, Advanced Detection Of Residual Respiratory Events (apnea/hypopapnea Index, Obstructed Airway Apnea, Clear Airway Apnea, Hypoapnea, Periodic Breathing, Large Leak And Snore) 1 Unit Cpap Machine The Res Med Air Sense™ 11 Auto Set With Humid Air Automatically Adjusts Pressure Levels Based On Your Breathing Patterns Throughout The Night. A Crisp, Color Lcd Touchscreen Lets You Customize The Device’s Settings And View Sleep Data. The Machine Includes An Integrated, Heated Humidifier And Climate Line Air Heated Tubing. Chose Between The Standard Humid Air™ Model (tubing Not Included) Or Humid Air™ Model With Climate Line Air™ 11 Tube Included. Temperature And Humidity Can Be Manually Adjusted Or Set For Automatic Climate Control “for Him” And “for Her” Algorithms Are Available Auto-ramp Up To 45 Minutes In 5-minute Increments Climate Line Air Tubing* Included For Automatic Climate Control (not Included With Standard Model) Personal My Air Assistant Guides You Through Device Installation And Therapy Acclimation Care Check-in Feature Provides Coaching And Troubleshooting For New Users Dimensions: 3.72” X 10.71” X 5.45” Weight: 2.3 Lbs. Sound Level: 27 Dba 1 Unit Mechanical Ventilator Modes Available: Vc-ac, Pc-ac, Vc-simv, Pc-simv Pip: 20-70 Cm Of H 2 O (adjustable In Steps Of 1) Peep: 0-20 Cm Of H 2 O (adjustable In Steps Of 1) Inspiratory: Expiratory Ratio (i:e): 1:0.3 - 1:4 (adjustable In Any Ratio) Respiratory Rate (bpm): 10 – 40 Breaths Per Minute In Increments Of 2 Tidal Volume: 150 Ml – 800 Ml In Steps Of 50 Unique On-graph Incentive To Show Current Best Values • Test Quality Advisory Messages And Quality Report • Fully Compliant To Ats/ers 2005 Guidelines • Available With Both Disposable Or Reusable Turbine Flow Meter • Elegant And Robust Carrying Case 2 Units Cardiac Monitor Introduction: Multi Parameter Patient Monitor For High-end Specialist – 12.1”(10.4”) High Resolution(800×600) With Maximum 9 Wave Forms – Standard Configuration: Ecg, Spo2, Nibp, Resp, 2temp, 2ibp – 6 Kinds Of Virtual Screen – 3ch Ecg : Full 7 Ecg & St Segment Analysis (lead I, Ii, Iii, Avr, Avl, Avf, V) – 12ch Ecg : Full 12 Ecg & St Segment Analysis (lead I, Ii, Iii, Avr, Avl, Avf, V1, V2, V3, V4, V5, V6) – 13 Arrhythmia Analysis & Pacemaker Detection – 7days Tabular And Graphic Trend Data Save Multi High-end Functions: – Drug Dose Calculation, Ecg Recall, Mini Trend, Ico, Color Change, Nibp Stat, Nibp Venous Stat, Oxy-crg, Patient Information, Temp Td – Touch Screen (option) – Easy S/w Upgrade Using Sd Card (max 2gbyte) – Durable And Light Long Li-ion Battery Operation (std 1pack: 2hr, 2pack: 4hr) – Lan And Wireless Lan – Variable And World Best Etco2 Module – Oridion’s Microstream Etco2 – Respronics’s Mainstream (c5), Sidestream (loflo) – Hrv, Apg Detection – 12.1″(10.4″) High Resolution(800×600) – Provides Clear Visibility From Long Distance And Any Angle – Maximum 9 Wave Forms – Supreme Standard Configuration And Extensionability – Standard: Ecg, Spo2, Nibp, Respiration, 2temp, 2ibp – Optional: Standard + 4temp, 4ibp, Ico, Etco2, 12ch Ekg, Touch Screen, 3ch Printer – Small Size But Large Virtual Screen – 12.1” Monitor Provides 72.6”(12.1” X 6) View Effect By Using 6 Virtual Screens. – 10.4” Monitor Provides 62.4”(10.4” X 6) View Effect By Using 6 Virtual Screens. – Perfect 3ch Ecg (std.) And 12ch Ekg(opt.) Will Make You Ecg Analysis Specialist. – Livegraphy Waveform By Votem’s Digital Filter Technology – 3ch Ecg (std.) Displays Full 7 Ecg Waves & St Segment Analysis (lead I, Ii, Iii, Avr, Avl, Avf, V) 2 Units Incubator Standard Features: ●servo Control Mode: Air Temperature, Skin Temperature; ● Parameter Displaying: Set Temperature,air Temperature, Skin Temperature, Internal Humidity, Heat Power Rate; ● Audible & Visual Alarms: Power Failure, Sensor Failure, Higher & Lower Temp, Air & Skin Temperature Override,fan Failure, System Failure; ● >37℃preset Mode: Power Failure Reset Memory, Alarm Silence, Keypad Lock, Self-test Function; ● Hood With Dual Slope; 6 Hand-ports; ● Rs-232 Output Connector (use For Network System); ●iv Poles; ●protective Guard Rail; ●storage Cabinets. Specification Of Hood: Mattress To Hood: 450 Mm Observation Side Of Hood: Two Incline Operate Port: 6 (2 Iris Ports) Tubing Grommets: 4 Front Access Panel: 826×310 Mm Technical Specifications: Power Requirement ≤400va Temperature Control Mode: Air And Skin Servo Control Air Temp Control Range: 20℃～37℃ Temperature Override Mode To: 20℃～39℃ Skin Temp Control Range: 30℃～37℃ Temperature Override Mode To: 30℃～38℃ Temperature Fluctuation: ≤0.5℃ Mattress Temperature Uniformity: ≤0.8℃ Temperature Rise Time: ≤45 Min Noise Level Within Hood Environment: ≤55d Alarms Power Failure Alarm Fan Failure Alarm Sensor Failure Alarm High Air Temperature Alarm: +3.0℃ Low Air Temperature Alarm: -3.0℃ High Skin Teperature Alarm: +1.0℃ Low Skin Temperature Alarm: -1.0℃ Over Air Temperature Alarm: ≤38.0℃; ≤40.0℃ Over Skin Temperature Alarm: ≤38.0℃; ≤39.0℃ System Failure Alarm Alarm Silence Function Operational Condition 2 Units Infant Warmer Temperature Control Range: 25°c-37°c Temperature Override Mode To 38°c Temperature Sensor Accuracy: <0.3°c Mattress Surface Temperature Uniformity: <2.0°c Temperature Rise Time: <45mins Heat Output Indicate: 0-100% In 10% Radiant Box Horizon Angle Adjust Range 0-90° Adjustable In Step-less Bed Tilt Adjustment: Continues Adjustable In +10° 2 Units Bilirubin Light/photo-therapy Machine Device Classification Type Of Protection Against Electric Shock Class I Degree Of Protection Against Ingress Of Liquids And Particulate Matter (iec 60601-1) Ipx0 Mode Of Operation Continuous Classification In Accordance With Eu Directive 93/42/eec Iia Umdns Code/gmdn Code 13-037/35239 Physical Attributes Bililux Photo Therapy Light Length ≤39 Cm (15.4 In) Width ≤19 Cm (7.5 In) With Quick-connect Plug Height ≤8 Cm (3.1 In) Weight (without Options/accessories) ≥1.2 Kg (2.7 Lb) Bililux Spring Arm Length, Spring Arm Fully Folded ≤61 Cm (24 In) Length, Spring Arm Fully Extended ≤106 Cm (41.7 In) Weight (without Options/accessories) ≤1.5 Kg (3.3 Lb) Bililux Trolley (with Spring Arm) Height (trolley At Lowest Position And Spring Arm Fully Folded) ≤132 Cm (52 In) Height (trolley At Highest Position, Lower Arm Fully Extended, And Upper Arm At 45° Angle) ≤213 Cm (83.9 In) Weight (without Options/accessories) ≤14.9 Kg (32.8 Lb) Total Mass Including Safe Working Load 18.1 Kg (39.9 Lb) 2 Units Portable Or Light Kl04l-iii Vertical4-reflector Luminescence Shadowless Lamp Kl04l-iii Luminescence Shadowless Lamp Adopts Light Source From Different Positions For Focus To Eliminate Shadows Of Different Parts Of Medical Workers Vertical Mobile Setup With Braking Device Is Not Limited By The Space Of Surgical Room And Is Safe And Reliable In Use Illumination: > 50,000lx (at 1m Distance) Color Temperature: 4000k+500k Mains Voltage: Ac220v+10%50hz Bulb Voltage: Ac24v Bulb Power Input Power: 120va 1 Unit Orthopedic Instrument Set Contents: 77 Pieces With Tray • 1 Pc. Knife Handle #3 • 2 Pcs. Knife Handle #4 • 1 Pc. Mayo Dissecting Scissor Straight 5 1/2″ (14cm) • 1 Pc. Mayo Dissecting Scissor Curved 5 1/2″ (14cm) • 1 Pc. Mayo Dissecting Scissor Straight 6 3/4″ (14cm) • 1 Pc. Mayo Dissecting Scissor Curved 6 3/4″ (14cm) • 1 Pc. Metzenbaum Scissor Curved 7″ (17.8cm) • 1 Pc. Esmarch Bandage And Cast Shears 8″ (20.3cm) • 1 Pc. Tissue Forcep 6″ (15.2cm) 1x2t • 1 Pc. Tissue Forcep 6″ (15.2cm) 4x5t • 2 Pcs. Adson Tissue Forceps 4 3/4″ (12.1cm) 1x2t • 6 Pcs. Crile Forcep 6 1/4″ (15.9cm) Curved • 4 Pcs. Rochester Ochsner Forcep Straight 8″ (20.3cm) • 6 Pcs. Backhaus Towel Clamp 5 1/4″ (13.3cm) • 1 Pc. Mayo Hegar Needle Holder 8″ • 1 Pc. Crile Wood Needle Holder 6″ • 1 Set Us Army Retractor 8 1/2″ Set Of 2 Pcs. • 1 Pc. Israel Retractor 9″ (22.9cm) 4 Prong Blunt • 1 Pc. Volkman Retractor 8 3/4″ (922.2cm) 4 Prong Sharp • 2 Pcs. Volkman Retractor 8″ (20.3cm) X 3/4″ (19cm) 4 Prong Blunt • 1 Pc. Bennett Bone Elevator 9 1/2″ (24.1cm) Small • 1 Pc. Bennett Bone Elevator 9 1/2″ (24.1cm) Large • 6 Pcs. Allis Tissue Forcep 6″ (15.2cm) 4x5t • Pc. Frazier Ferguson Suction Tube Fr-8 (2.6mm) • 1 Pc. Frazier Ferguson Suction Tube Fr-12 (4mm) • 1 Pc. Beyer Rongeur 7″ (17.8cm) Curved • 2 Pcs. Schnidt Tonsil Forcep 7 1/2″ (19.1cm) • 1 Pc. Ruskin Bone Cutting Forcep 7 1/2″ (19.2cm) Angled • 1 Pc. Stile-luer Rongeur 8 3/4″ (22.2cm) Curved • 2 Pcs. Kern Bone Holding Forcep 7″ (22.9cm) • 1 Pc. Lane Bone Holding Forcep 13″ (33cm) W/ Ratchet • 1 Pc. Lowman Bone Clamp 4 1/2″ (12.7cm) • 1 Pc. Lowman Bone Clamp 7 1/4″ (20.3cm) • 2 Pcs. Bone Hook 9″ (22.9cm) Sharp • 1 Pc. Miltex Mallet 11 (27.9cm) 16oz (454g) • 1 Pc. Bone File 9 ¾’ 3 Units Infusion Pump Delivery Rate: 1-1000ml/h.01-999.9ml/h Delivery Limit Range: 01-9999ml Pumping Mechanism: Linear Peristaltic Finger Accuracy: + 5 (ml/h Control Mode/with Approved Iv Set) K.v.o Rate: 1ml/h-10ml/h (adjustable) Purge Rate: 1-1000ml/h (adjustable) Bolus: 1-1000ml, 1-9999ml (adjustable) Dimension: 100x190x250 (mm)/weight:3.5kg) Power: Ac110-230v, 50/60hz Or Dc9, 6v, Dc24v (1a) Battery Type: N-cd (standard)/ni-mi+ (option) Operating Time: 4 Hours (at 125ml/h) 1 Unit 2d Echo Bed 19”-38” Height Range Meets The Americans With Disabilities Act (ada) Low Height Requirement Of 17”-19” For Patient Transfer, While Ensuring Ergonomic Standing Posture For Staff • Optional Battery Operation • Dual Rapid Release Drop Sections Provide Unhindered Access To The Patient • 65° Fowler Positioning Increases Comfort Of/for Patients With Shortness Of Breath • +/- 15° Trendelenburg Helps Restore Patient’s Blood Pressure • Improved Features: New Handrail Design, Improved Single Pedal Braking System, Foley Bag Hook, Hand Control Storage, Battery Operation 1 Unit X-ray Tube Varian Rad-14, 0.6-1.2 Focal Spot, Diamond Housing X Ray Tube - 89011n 3 Units Examining Table • Examination And Treatment Table, Hamilton Type, With Drawer And Compartment Door, Upholstered Three Section Top, Provided With Stirrup And Sliding Foot Stool. • Size: 58 Inc. X 20 Inc. X 34 Inc. 3 Units Transfer Stretcher Bed Technical Specifications Frame: Powder Coated Steel Or Better Backraise Inclination: Atleast 0 To 35 Degrees Has Adjustable Height Side Guard: Made Of Abs Plastic Or Better Castor Wheels: Manufacturer's Standard Max Load: At Least 150kg Weight: Manufacturer's Standard Dimensions: L X W X H = 2000mm X 700mm X 700mm, ± 100mm On Each Dimension Accessories: -has Oxygen Cylinder Holder -has Iv Pole Holder Located In 4 Different Positions -with One Iv Pole 1 Unit Vein Scanner Technical Specifications • Type: Light Weight, Mobile • For Obese/bloated, Neonate, Pedia, Elder And Dark Skin Patients • Display: Dlp Display Or Better • Infrared Wavelength: At Least 850nm • Image Resolution: At Least 856*480 Pixels • Visible Vein Size: ≥1 Mm Or Better • Penetration Depth: ≤8 Mm • Optimal Imaging Distance: At Least 15 ~ 25cm • Mode: Basic, Inverse And Enhanced • Imaging Color: Single Color And Mixed Colors • Image Sizes: Has Small, Medium And Large Sizes • Brightness: Adjustable To Low, Medium And High • Power Supply: 220v, 50/60hz • Battery Type: Rechargable Lithium Battery At Least 3000mah • Battery Capacity: At Least 2 Hours Fully Charged • Dimension: Manufacturer's Standard • Net Weight: Manufacturer's Standard • Accessories: - Battery And Charger - Charging Cord - Trolley With 5 Castor Wheels 1 Unit Newborn Hearing Test Machine Specifications: • Display: At Least 42.7mm X 33.4mm Or 1.7 In X 1.3in • Resolution: At Least 160x128 • Dimension: Manufacturer's Standard • Weight: Manufacturer's Standard • Warm-up Time <5s Or Shorter • Boot-up Time: 1min Or Shorter • Mode Of Operation: Continous • Connectors - Oae: Hdmi Connector For Connection To The Micro Probe - Usb: Micro Usb • Data Interface - Pc Connection: Micro Usb - Printing: Wireless Connection • User Feedback - Accoustic: Integrated Speaker - Visual: Color Display Oled - User Interface: Oled Display To Provide User Information And Progress Of Measurement • Battery - Type: Rechargeable Thium-ion Np 120 Or Better - Capacity: 1700 Mah Or Better - Expected Life Time: 3 Years Or Better - Battery Life: 15 Hours On Time • Memory: At Least 500 Test Dpoae • Stimulus - Frequency Range: 1500 Hz To 12 Hz - Frequency Accuracy: <1% - Nominal Frequency: F2 - F2/f1 Ratio: 1.2 - Level Range: 40db Spl To 70db Spl - Level Accuracy: ± 1.5db Or Better - Default Level (l1/l2): 65db / 55db Spl With In Ear Calibration - Transducer: Oae - Recording - Probe Fit Check: Low Frequency Level Loss - Display: Snr Bars Or Line Diagram With Oae And Noise Level Per Frequency - Pass Criteria - Snr Criteria: 6db - Frequency For Pass: 3 Transducer • Oae Probe • Microphone: - 20 Db Spl At 2 Khz (1 Hz Bandwith) • System Noise: - 13 Db Spl At 1 Khz (1 Hz Bandwith) • Cable Length: At Least 110 Cm Or 43in • Connector: Hdmi Or Better Printer • Print Mode: Thermal Dot Matrix Print • Printing Width: At Least 48 Mm (1.9in) • Resolution: 8 Dots/mm (203 Dots Per In (dpi)) • Dots Per Line: At Least 384 Dots Accessories And Inclusions • Battery Pack: 2 - Cell Li-ion Battery Pack 7.4 V -1500 Mah • Eartips: Box Of Eartips • Set Of Probe Tubes Standard Certifications • Device Certification From Nhsrc • Device Certification From Fda 1 Unit Automated External Defibrillator (aed) • Two-button Operation: On/off, Discharge (shock Button) • Voice Prompts: Voice Command That Gives Instruction To The User In Operating The Device • Automatically Evaluates Patient Impedance For Proper Pad Contact. • Automatically Analyses Patient Condition For Shockable Or Non-shockable Rhythms • Patient Ecg Can Be Acquired Through Defibrillator Pads • Energy Output Accuracy: ± 15% • Pulse Shape: Biphasic • Charge Time: Maximum Of 15 Seconds • Battery Capacity: Capable Of Providing At Least 200 Discharges At Maximum Energy • Replaceable Battery • Visible And Audible Indicators: - Low Battery - Pad Skin Contact/disconnection - Aed Status • Defibrillator Pads: Self-adhesive, Disposable And Non-polarized - At Least Ten (10) Pairs For Adult - At Least Ten (10) Pairs For Pedia

Details: Reconstruction of the Existing Footpath on the Left Side of the Road in the Direction of Milčice From the Crossing for Pedestrians at the Pečka Bus Stop, Velké Chvalovice, Width of the Footpath 1.5 M (up to 2.4 M), the Footpath is Transferred to the North Side of the Road by a Place Allowing Crossing (between No. 4 A 5, P. no. 174/3), Pedestrian Crossing Is Proposed Place of intersection with Ul. Ke Dráze (at No. 135, At No. 177) – Connection of the Footpath Route Through the New Path for Pedestrians and Cyclists; New buildings Paths for pedestrians and cyclists on the right side of the road in the direction of Milčice, Width Mainly 2.4 M, Locally Reduced At No. 7, U P. no. 153 On 1.5 MZ Due to the Narrow Profile of the Site (a 130 cm high Railing will be installed) AU No. 198, U P. no. 107/5 Due to the Elevation of the Roadway and the Presence of Existing Exits, Connecting to the Existing Path for Pedestrians and Cyclists by Modifying the Intersection Ul. Ke Hřišti A Ul. Milčická, with a crossing for pedestrians and a crossing for cyclists (at the Chapel of St. John of Nepomuck in Velké Chvalovice); Construction of a Crossing Area at No. 146, U P. no. 205; Lighting Transitions; Directional adjustment of existing communication in Ul. Milčická In the section between Křižovatka S Ul. To The Track And To The Field, Designed About The Width Of 6 MS By Expanding In The Directional Arc; Adjustment of slopes, construction of drainage, execution of vertical and horizontal traffic markings, public lighting and public radio, vegetation adjustments. Note: Sat 105 Dopravní Ostrůvek, Incl. Relevant Parts of Vertical and Horizontal Traffic Markings, Public Lighting (2 Pcs Including Cable Lines) and Vegetation Treatments (Establishment of Approx. 73 M2 of Lawn), Already Implemented and Not Part of the List of Works, Supplies and Services. The performance of works within the framework of Sat 402 and Sat 403 of the network relocation is not the subject of this public order. Part of the performance of the Public Contract is, among other things, the performance of all activities related to the delivery of construction works and constructions, the performance of which is necessary for the proper completion and operation of the work. The implementation of the Public Contract will be carried out in accordance with the principle of "significantly do not harm" (dnsh) in the area of the environment. The Estimated Value Indicated Including the Value of Reserved Changes to Contractual Obligations.

Details: Combined Synopsis/solicitation Notice combined Synopsis/solicitation Notice page 3 Of 11 combined Synopsis/solicitation Notice *= Required Field combined Synopsis/solicitation Notice page 1 Of 9 description combined Synopsis/solicitation Notice combined Synopsis/solicitation Notice page 11 Of 11 combined Synopsis/solicitation Notice *= Required Field combined Synopsis/solicitation Notice page 1 Of 10 page 1 Of this Is A Combined Synopsis/solicitation For Commercial Products Prepared In Accordance With The Format In Federal Acquisition Regulation (far) Subpart 12.6, Streamlined Procedures For Evaluation And Solicitation For Commercial Products, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Quotes Are Being Requested, And A Written Solicitation Document Will Not Be Issued. this Is A Brand Name Or Equal To Request For Quote (rfq), And The Solicitation Number Is 36c26025q0159. The Government Anticipates Awarding A Firm-fixed Price Supply Order From This Solicitation. this Is A Solicitation For A Smart Mattress, Base Frame, Mattress Cover, Remote And Set-up. The Solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular Fac 2025-02 January 3, 2025. this Solicitation Is An Unrestricted Open Market Solicitation. The Associated North American Industrial Classification System (naics) Code For This Procurement Is 337910, With A Small Business Size Standard Of 1000 Or Fewer Employees, And The Psc Is 6530. all Interested Companies Shall Provide Quotations That Are Brand Name Or Equal To Sleep Number As Follows: quantity manufacturer Part description 6 i2p5 sleep Number New P5 360 Queen Smart Mattress 60 X80 6 sleep Number New Flexfit 2 Queen Bed Base 6 424201 sleep Number Total Encasement Mattress Cover For Smart Beds Queen 6 126016 sleep Number New Smart Remote Compatible With Mattress And Frame 1 sleep Number Half Day Delivery Install Set Up standard Warranty Shall Apply To All Parts Listed. A 15 Year Warranty Is Desired. must Meet All Required Federal Mandates For Medical Use. salient Characteristics queen Smart Mattress: 60 X 80 weight Capacity: Supports Up To 550 Lb. adjustable Firmness includes Air Hoses And A Power Supply To In/deflate Mattress power Supply Compatible With A 100 240 Vac Grounded Wall Socket must Be Compatible With Adjustable Base breathable queen Bed Base: weight Capacity: Can Support A Working Load Of Mattress, Mattress Cover, System Hardware And An Additional 550 Lb adjustable To Multiple Positions, Including Supine To Upright Head Position And Varied Levels Of Foot Positions. designed For And Supports Queen Mattress includes An Electric Control System, Power Cord Connections And Cables total Encasement Mattress Cover: washable, Zippered Cover Fully Encases Mattress And Hose Openings. waterproof And Will Block Bed Bugs, Dust Mites And Allergens smart Remote: hand Control That Adjusts Firmness Of Mattress And The Position Of The Base (hardwired To The Bed Is Desired, But Not Required) compatible With Smart Frame And Mattress delivery/install Set-up: deliver And Assemble Complete Bed Packages To Va Medical Center American Lake Sleep Lab, Set Up Beds In Designated Rooms And Haul Away Packaging, Old Mattresses And Frames coordinate With Poc At Sleep Lab For Delivery Times 52.211-6â brand Name Or Equal. as Prescribed Inâ 11.107(a), Insert The Following Provision: brand Name Or Equalâ (aug 1999) (a)â if An Item In Thisâ solicitationâ is Identified As "brand Name Or Equal," The Purchase Description Reflects The Characteristics And Level Of Quality That Will Satisfy The Government S Needs. The Salient Physical, Functional, Or Performance Characteristics That "equal"â productsâ mustâ meet Are Specified In Theâ solicitation. (b)â to Be Considered For Award,â offersâ of "equal"â products, Including "equal"â productsâ of The Brand Name Manufacturer,â must- (1)â meet The Salient Physical, Functional, Or Performance Characteristic Specified In Thisâ solicitation; (2)â clearly Identify The Item By- (i)â brand Name, If Any; And (ii)â make Or Model Number; (3)â includeâ descriptive Literatureâ such As Illustrations, Drawings, Or A Clear Reference To Previously Furnished Descriptive Data Or Information Available To Theâ contracting Officer; And (4)â clearly Describe Any Modifications Theâ offerorâ plans To Make In A Product To Make It Conform To Theâ solicitationâ requirements. Mark Any Descriptive Material To Clearly Show The Modifications. (c)â theâ contracting Officerâ will Evaluate "equal"â productsâ on The Basis Of Information Furnished By Theâ offerorâ or Identified In Theâ offerâ and Reasonably Available To Theâ contracting Officer. Theâ contracting Officerâ is Not Responsible For Locating Or Obtaining Any Information Not Identified In Theâ offer. (d)â unless Theâ offerorâ clearly Indicates In Itsâ offerâ that The Product Being Offered Is An "equal" Product, Theâ offerorâ shallâ provide The Brand Name Product Referenced In Theâ solicitation. (end Of Provision) delivery Fob Destination Is Preferred, 30-60 Days After Receipt Of Order. All Deliveries Will Be Coordinated With The Puget Sound Va Medical Center Point Of Contact. place Of Delivery: department Of Veterans Affairs va Puget Sound american Lake Medical Center 9600 Veterans Dr. tacoma, Wa 98493 . the 6 Rooms Within The Sleep Lab Located At The American Lake Campus: Room Numbers Are 301,303,304,305,306,307. the Full Text Of Far Provisions Or Clauses May Be Accessed Electronically At Http://acquisition.gov/comp/far/index.html http://www.va.gov/oal/library/vaar/index.asp the Following Solicitation Provisions Apply To This Acquisition: far 52.212-1, Instructions To Offerors Commercial Products addendum To Far 52.212-1 Instructions To Offerors Commercial 52.204-7 system For Award Management (oct 2018) 52.204-16 commercial And Government Entity Code Reporting (aug 2020) 52.204-24 representation Regarding Certain Telecommunications And Video Surveillance Services Or Equipment (nov 2021) 52.211-6 brand Name Or Equal (aug 1999) 52.212-3 offeror Representations And Certifications-commercial Products And Commercial Services (may 2024) 52.225-2 buy American Certificate (oct 2022) 52.252-1 provisions Incorporated By Reference (feb 1998) vaar Provisions: 852.239-75 information And Communication Technology Accessibility Notice (feb 2023) (a) Gray Market Items Are Original Equipment Manufacturers (oem) Goods Sold Through Unauthorized Channels In Direct Competition With Authorized Distributors. This Procurement Is For New Oem Medical Supplies, Medical Equipment And/or Services Contracts For Maintenance Of Medical Equipment (i.e., Replacement Parts) For Va Medical Centers. No Remanufactures Or Gray Market Items Will Be Acceptable. (b) Offeror Shall Be An Oem, Authorized Dealer, Authorized Distributor Or Authorized Reseller For The Proposed Medical Supplies, Medical Equipment And/or Services Contracts For Maintenance Of Medical Equipment (i.e., Replacement Parts), Verified By An Authorization Letter Or Other Documents From The Oem, Such That The Oem S Warranty And Service Are Provided And Maintained By The Oem. All Software Licensing, Warranty And Service Associated With The Medical Supplies, Medical Equipment And/or Services Contracts For Maintenance Of Medical Equipment Shall Be In Accordance With The Oem Terms And Conditions. (c) The Delivery Of Gray Market Items To The Va In The Fulfillment Of An Order/award Constitutes A Breach Of Contract. Accordingly, The Va Reserves The Right Enforce Any Of Its Contractual Remedies. This Includes Termination Of The Contract Or, Solely At The Va S Election, Allowing The Vendor To Replace, At No Cost To The Government, Any Remanufactured Or Gray Market Item(s) Delivered To A Va Medical Facility Upon Discovery Of Such Items. (d) Any Award Made As A Result Of This Solicitation Will Be Made On An All Or Nothing Basis. (e) Offerors Are Warned Against Contacting Any Va Personnel Other Than The Contracting Officer And Contract Specialist Prior To Placement Of Any Award Made Resulting From This Rfq. If Such Contact Occurs And Found To Be Prejudicial To Competing Contractors, The Offeror Making Such Contact May Be Excluded From Award Considerations. (f) All Proprietary Information Shall Be Clearly And Properly Marked. If The Offeror Submits Annexes, Documentation, Attachments, Or The Like, Not Specifically Required By This Solicitation, Such Will Count Against The Offeror S Page Limitations Unless Otherwise Indicated In The Specific Volume Instructions Below. (g) All Information Shall Be Confined To The Appropriate File. The Offeror Shall Confine Submissions To Essential Matters, Sufficient To Define The Quote And Provide An Adequate Basis For Evaluation. Offerors Are Responsible For Including Sufficient Details, In A Concise Manner, To Permit A Complete And Accurate Evaluation Of Each Quote. (end Of Addendum To 52.212-1) far 52.212-2, Evaluation-commercial Items : The Government May Award A Contract Resulting From This Solicitation To The Responsible Offeror Whose Offer Conforming To The Solicitation Will Be Most Advantageous To The Government, Price And Other Factors Considered. In Accordance With Far 9.104-2, The Special Standards Of Responsibility Described Below Apply To This Procurement. Offerors Who Fail To Meet Any Special Standards Of Responsibility Will Not Be Eligible To Receive Contract Award. The Following Factors Shall Be Used To Evaluate Offers: special Standards Of Responsibility: (per Far 9.104-2) The Following Special Standards Of Responsibility Apply To This Procurement: sp1: Offeror Must Be A Manufacturer Authorized Provider For The Items Provided. A Letter From The Manufacturer Stating Such Must Be Included With Any Response To This Solicitation. price (a) A Written Notice Of Award Or Acceptance Of An Offer, Mailed Or Otherwise Furnished To The Successful Offeror Within The Time For Acceptance Specified In The Offer, Shall Result In A Binding Contract Without Further Action By Either Party. Before The Offeror's Specified Expiration Time, The Government May Accept An Offer (or Part Of An Offer), Whether Or Not There Are Negotiations After Its Receipt, Unless A Written Notice Of Withdrawal Is Received Before Award. far 52.213-3 Offerors Are Advised To Include A Completed Copy Of The Provision At 52.212-3, Offeror Representations And Certifications -- Commercial Items, With Its Offer If Has Not Been Completed On Sam.gov. Offerors Must Complete Annual Representations And Certifications Electronically Via The System For Award Management (sam) Website Located At Https://www.sam.gov/portal In Accordance With Far 52.212-3, Offerors Representations And Certifications Commercial Items. If Paragraph (j) Of The Provision Is Applicable, A Written Submission Is Required. all Service-disabled Veteran Owned Businesses Or Veteran Owned Businesses Must Be Registered/certified With The U.s Small Business Administration At Veteran Small Business Certification Veteran Small Business Certification (sba.gov). the Following Contract Clauses Apply To This Acquisition: far 52.212-4, Contract Terms And Conditions Commercial Products (oct 2018) addendum To Far 52.212-4 The Following Clauses Are Included As A Part Of The Addendum: http://www.acquisition.gov/far/index.html (far) http://www.va.gov/oal/library/vaar/index.asp (vaar) 52.203-17 contractor Employee Whistleblower Rights (nov 2023) 52.204-13 system For Award Management Maintenance (oct 2018) 52.204-18 commercial And Government Entity Code Maintenance (aug 2020) 52.219-6 notice Of Total Small Business Set-aside (nov 2020) (15 U.s.c. 644) 52.225-1 (buy American Supplies) 52.232-40 providing Accelerated Payments To Small Business Subcontractors (dec 2013) 52.233-3 protest After Award (aug 1996) (31 U.s.c. 3553). 52.252-2 clauses Incorporated By Reference (feb 1998) vaar Clauses: 852.203-70 commercial Advertising (may 2018) 852.212-71 gray Market Items (nov 2018) 852.232-72 electronic Submission Of Payment Requests (nov 2018) 852.239-76 information And Communication Technology Accessibility (feb 2023) 852.242-71 administrative Contracting Officer (oct 2020) 852.246-71 rejected Goods (oct 2018) 852.247-73 packing For Domestic Shipment (oct 2018) far 52.212-5, Contract Terms And Conditions Required To Implement Statutes Or Executive Orders Commercial Products (mar 2023) the Following Subparagraphs Of Far 52.212-5 Are Applicable And Incorporated By Reference: 52.204-10 52.204-27 reporting Executive Compensation & First-tier Subcontract Awards (jun 2020) (pub. L. 109-282) (31 U.s.c. 6101 Note) prohibition On A Bytedance Covered Application (jun 2023) (section 102 Of Division R Of Pub. L. 117-328) 52.209-6 protecting The Government S Interest When Subcontracting With Contractors Debarred, Suspended, Or Proposed For Debarment (nov 2021) (31 U.s.c. 6101 Note) 52.219-6 notice Of Total Small Business Set-aside (nov 2020) (15 U.s.c. 644). 52.219-28 52.219-27 post Award Small Business Program Representation (mar 2023) (15 U.s.c 632(a)(2)) notice Of Service-disabled Veteran-owned Small Business Set-aside (oct 2022) 52.222-3 52.222-19 convict Labor (jun 2003) (e.o. 11755) child Labor Cooperation With Authorities And Remedies (feb 2024) (e.o. 13126) 52.222-21 prohibition Of Segregated Facilities (apr 2015) 52.222-26 equal Opportunity (sep 2016) (e.o. 11246) 52.222-36 equal Opportunity For Workers With Disabilities (jun 2020) (29 U.s.c. 793) 52.222-50 combating Trafficking In Persons (nov 2021) (22 U.s.c. Chapter 78 And E.o. 13627) 52.223-18 encouraging Contractor Policies To Ban Text Messaging While Driving (jun 2020) (e.o. 13513) 52.225-1 buy American-supplies (oct 2022) (41 U.s.c. Chapter 83) 52.225-13 restrictions On Certain Foreign Purchases (feb 2021) (e.o.'s, Proclamations, And Statutes Administered By The Office Of Foreign Assets Control Of The Department Of The Treasury) 52.226-8 encouraging Contractor Policies To Ban Text Messaging While Drivingâ (mayâ 2024)â  52.232-33 payment By Electronic Funds Transfer System For Award Management (jul 2018) (31 U.s.c. 3332) 52.240-1 prohibition On Unmanned Aircraft Systems Manufactured Or Assembled By American Security Drone Act-covered Foreign Entities (nov 2024) (sections 1821-1826, Pub. L. 118-31, 41 U.s.c. 3901 Note Prec.) all Quoters Shall Submit According To The Following: quotes Must Be Emailed To Rachel.richardson@va.gov And Received No Later Than 3:00 Pm Pst On 01/08/2025. Quotes May Be Submitted On This Document Or The Vendor S Own Form And Must Include, If Not The Manufacturer, An Authorized Distributor Letter, And A Completed Buy American Certificate. Any Offer That Does Not Provide The Supporting Documentation May Be Considered Non-responsive. Required Supporting Documentation And Information: authorized Distributor Letter If Not The Manufacturer completed Buy American Certificate certification That Equipment Meets/exceeds The Salient Characteristics Of The Desired Brand Above delivery Date warranty Details the Government Intends To Make Award Without Discussions. for Information Regarding The Solicitation, Please Contact Rachel Richardson At Rachel.richardson@va.gov. (end Of Provision) mandatory Electronic Invoicing va Published The Final Rule Requiring Vendors To Submit Invoices Electronically To The Financial Services Center (fsc) In The November 27, 2012 Federal Register. The Rule Became Effective December27,2012.the Rule Includes A New Contract Clause To Be Inserted In All Solicitations And Contracts By The Contracting Officer (vaar 852.232-72). Vendors Can Comply With The Rule By Using Either Of The Two Methods Below: facsimile, E-mail, And Scanned Documents Are Not Acceptable Forms Of Submission For Payment Requests. Electronic Form Means An Automated System Transmitting Information Electronically According To The Accepted Electronic Data Transmission Methods Below: va S Electronic Invoice Presentment And Payment System The Fsc Uses A Third-party Contractor, Tungsten, To Transition Vendors From Paper To Electronic Invoice Submission. Please Go To This Website:http://www.tungsten-network.com/us/en/veterans-affairs/to Begin Submitting Electronic Invoices, Free Of Charge. a System That Conforms To The X12 Electronic Data Interchange (edi) Formats Established Bythe Accredited Standards Center (asc) Chartered By The American National Standards Institute (ansi). The X12 Edi Web Site (http://www.x12.org). vendor E-invoice Set-up Information: please Contact Tungsten At The Phone Number Or Email Address Listed Below To Begin Submitting Your Electronic Invoices To The Va Financial Services Center For Payment Processing, Free Of Charge. If You Have Question About The E-invoicing Program Or Tungsten, Please Contact The Fsc At The Phone Number Or Email Address Listed Below: tungstene-invoicesetupinformation:1-877-489-6135 tungstene-invoiceemail:va.registration@tungsten-network.com fsce-invoicecontactinformation:1-877-353-9791 fsce-invoiceemail:vafsccshd@va.gov

Details: Subject: Request for quotation "waltz night 2025" sound Dear Sir or Madam, We request that you submit a quotation by February 10, 2025 for the production below. The components and system technicians offered must be named, a sound system concept and the system technician's references must also be submitted. "Waltz Night 2025 - With the Philharmonic Orchestra of the Cottbus State Theater and Soloists", Altmarkt Cottbus - 03046 Cottbus Job: Provision and maintenance of a cardioid sound system Set-up: July 4th, 2025 Rehearsal: July 5th, 2025, approx. 2 p.m. 1st day of the event: July 5th, 2025, start: 6 p.m. 2nd day of the event: July 6th, 2025 Dismantling: July 7th, 2025 Components to be supplied: 01 - Main sound system: - 01x Cardioid line array sound system (l/r) including subwoofer, with controlled radiation behavior and high rear damping (cardioid), which provides the listening area with sound evenly and at a high volume level (at least 110db over the entire frequency range) - sound depth = 38 Meter - Max. point load per suspension point: 500kg - Incl. electric chain hoists and accessories 02 - Side sound system: - 02x Cardioid line array sound system (2x mono) incl. subwoofer, with controlled radiation behavior and high rear damping (cardioid), which covers the listening area evenly and with a high volume level (min. 110db over the entire frequency range) - Sound depth = 75 meters and 50 meters - Max. point load per hanging point 500kg - Incl. electric chain hoists and accessories 03 - Near field sound system - Left, front, right: - Point sound sources (2 x 10"/8"/1.4" drivers) around the stage, partly on stands, partly on the subs - Number approx. 10 pieces 04 - Stage sound system 04x stage monitor 10" coaxial controlled in four ways 05 - Wiring Foh - stage 04x Cat6 cable, length 100m incl. system amplifiers and complete system wiring, power distribution, assembly, dismantling, commissioning and transport 06 - Personnel - Personnel for complete assembly and dismantling of the hired personnel - 1x experienced system technician in dealing with classical music to set up and look after the sound system during the 1st day of the event - 01x sound technician to look after the sound system on the 2nd day of the event - The travel, accommodation and food costs are to be priced in the offer

Details: Description Procurement Of Inclusive Learning Resource Centers Assistive Devices, Equipment, Supplies And Materials (lot 10- Arts And Crafts Support Service Area: Skills Development) 1. The Deped Schools Division Of Eastern Samar, Through The General Appropriation Act Of 2024 Intends To Apply The Sum Of ₱ 597,951.44 Being The Abc To Payments Under The Contract For Procurement Of Inclusive Learning Resource Centers Assistive Devices, Equipment, Supplies And Materials (lot 10- Arts And Crafts Support Service Area: Skills Development) Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Deped Schools Division Of Eastern Samar Now Invites Bids For The Above Procurement Project. Bidders Should Have Completed, Within 5 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. 4. Prospective Bidders May Obtain Further Information From Deped Schools Division Office Of Eastern Samar And Inspect The Bidding Documents At The Address Given Below During Monday-friday, 8:00am To 5:00pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From The Address Below And Upon Payment Of A Nonrefundable Fee For The Bidding Documents In The Amount Of Php 1,000.00. It May Also Be Downloaded From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Nonrefundable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Deped Schools Division Of Eastern Samar Will Hold A Pre-bid Conference On January 13, 2025, 10:00am At The Bac Office, Deped Schools Division Of Eastern Samar Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, On Or Before January 27, 2025, 9:00am Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On January 27, 2025, 10:00am At The Given Address Below Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. Only The Proprietor Or Authorized Representative May Be Allowed To Purchase Bidding Documents. Letter Of Intent (loi), Special Power Of Attorney (spa) (for Authorized Representative), And Drl (document Request List From Philgeps) Are Required Upon Purchase. 11. The Deped Schools Division Of Eastern Samar Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. Items, Specifications, Quantity Of Delivery, And Abc: Sewing Machine Singer,15ch 179 Sewmaster, Automatic Bobbin Winder, Variable Stitch Length Control, Forward And Reverse Function, Numbered Dial Tension, Threadle Or Motor Options, Drop Feed Knob 5 Piece Utility Shelf, 1713s Utility Shelf 2 Pieces Table, Folding Table Ft-02 1200mm L X 400mm D X 750mm Ht., Structure: Melamine 3 Pieces Chairs, Cod Armchair Backrest Wood Horn Chair, 43x48x74, Material: High Quality Iron Wood, Max:150kg 6 Pieces Storage Cabinet, Dimension: 48*30*83cm, Material: Plastic, 3 Pieces Cork Bulletin Board, Wooden Frame, 30x40cm 1 Piece Glue Gun, Mitsushi Mit-gl40 40w, 100-240v, Hot Melt Glue Gun 2 Pieces Acrylic Color, Faber Castell, 12ml, 12 Colors 3 Pieces Scissors, Maped Reflex 3d Vivo Scissors, 16cm 4 Pieces Cutters, Ida Wallpaper Blade Cutter, Length 15cm, Width: 15cm 3 Pieces Watercolors, Prang 16 Watercolor Set 3 Sets Art Paper (multiple Colors), Avia Colors Assorted Colored Paper, 250 Sheets, 80 Gsm, Size: 8.5" X 11" 3 Reams Paint Brushes, Deli 73885 Brush Set 3 Pieces Yarn, Color, Dmc Natura Happy Cotton, 100% Cotton Yarnfor Crochet, Knitting And Yarn Crafts, Thickness: Light (8 Ply), Weight: 20 Grams, Length:43 Meters 10 Pieces Glue, Elmer's Glue, White 225 Grams 5 Pieces Colored Pencils, Staedtler Colored Pencil 136 C36 Luna Permanent 36 Colors 3 Sets Colored Pens, Faber-castell Coloring Pen, 12 Colors 3 Sets Sewing Pins, 40 Pieces 3 Pieces Sewing Needles, 16 Pcs Set Hand Sewing Needle, Size: S: 4cm (8pcs), M:4.5cm (6pcs)* L:5cm (2pcs), Mateial;stainless 10 Pieces Rotary Cutter, 45mm Fabric Rotary Cutter, Length:45m, Material:stainless Steel Blade+abs Handle, Color: Orange. Length: 165mm, Blade Diameter:45mm, Suitable For:leather Fabric Vinl Fiber Paper 2 Pieces Tape Measure, Deli 79650 Measuring Tape 150cm/60 Inches (1.5m*7mm) 10 Pieces Crochet Hooks, 100pcs Crochet Hook Set,perfect Round Point, Material: Plastic+metal, Size:18*13*3cm, Hook Size: 2mm,2.5mm,3.0mm,3.5mm,4.0mm,4.5mm,5.00mm,5.5mm,6.0mm,6.5mm 2 Pieces Knitting Needles, Sizes: 4,5,6 And 8 2 Pieces Crochet Thread, 5 Ply Monaco 100% Mercerized Cotton, Assorted Colors, Length:105 Meters, 50 Grams 20 Pieces Sewing Thread, Apple Spun Polyester Sewing Thread, Assorted Colors, 100 Meters, Polyester Material, 10pcs/box 2 Boxes Convertible Drawing And Drafting Table, Size: 24”x36” ▪color:raw Sienna / Brown ▪weight: 10-11kg 1 Piece Studio/painting Easel, Sizes: 85" - 120" Tall 2 Pieces Table/desk Painting Easel, Could Be An H Or An A Easel Type, For A Easel 38" To 75", For H Easel 84" To 96" 5 Pieces Manual And/or Electric Pencil Sharpener, Pencil Sharpener Hand Crank Manual Mechanical Pencil Sharpener,aluminum Alloy Knife Structure,cutting Outer Diameter Of 6.5-8mm Pencil 4 Pieces Wooden Mannequin, With Stand 11.5/14/21/30cm Wooden Human Mannequin Model Artist Movable Limbs Doll 2 Pieces Transparent Edge T-square, Hardwood Blade Dimensions: 30x13.5x0.2 Inches Weight: 14.4 Ounces Color: Wood Size: 36’’ 2 Pieces Carpentry Tools, Tool Set Includes: 1 – 9” Plastic Torpedo Level 1- Magnetic Bit Holder 1” Cr-v Bits Nut Drivers: 3/16”,1/4”,9/32”,5/16”, 11/32”,3/8” 10ft/3m Tape Measure 150mm Mini Saw 7” Locking Pliers 7-12” Diagonal Cutting Pliers 8” Long Nose Pliers 8” Adjustable Wrench 8” Water Pump Pliers Zinc-alloy Utility Knife Utility Knife Blade Black Cable Ties 160oz Claw Hammer Combination Wrench: ¼”, 5/16”, 3/8”, 7/16”. ½”, 9/16” Precision Screwdrivers:ph1, Ph0, Slotted:1/4, 2.0, 2.4, 3.0mm Metric Hex Keys: 1.5, 2, 2.5, 3, 4,5,5.5, 6mm Sae Hex Keys: 1/16”, 5/65”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, ¼” 16” Zipper Tool Bag Item Weight; 8.8 Pounds 17.7x9x9 Inches 2 Sets T50 Staple Gun, Size: 7x9x3 Inches 5/16” Staples 3 Pieces Slop Sink, Size: 30.2x18.4x10.0inch Color: 30”m Style: Single Bowl Material: Stainless Steel Thickness: 3.0-1.2mm 1 Piece Roofing Square Dual Marking Right Angle Picture Framing Carpenter Ruler, Steel 90 Degrees Roofing Square Measuring Size: 20x 30cm/8x12” Rustproof Size: 30x20.5x 20.5 Weight: 0.16kg 3 Pieces Professional Compound Mitre Box & Saw, Adjustable Angle 20x8x9 Inches Miter Box 22 Inches Back Saw 2 Pieces Drawing Lamp, Overall Dimensions: 1.5 “w X 3.5 “d X 29.5 “h Long, Bendable Neck 21” (53 Cm) 28 Led Bulbs Stainless Steel Wattage: 1 Can Be Mounted To Table, Desk Or Easel Usb Plug 2 Pieces Artists Taboret Made Of Beechwood. Measures 35-1/2"h X 17-1/2"w X 14-1/2"d 1 Piece Open Shelves Utility Rack, 72" Height X 48" Width X 18" Depth Five Adjustable Shelves 4,000 Lb. Capacity Steel Frame Particle Board For Shelves Rivet Lock Design With Nuts And Bolts 2 Pieces Chisel Rack For Wood Carving, 3/4″ Thick, And 2 Pieces 3/8″ Tall Plywood Number Of Slots May Vary 2 Pieces Corner Clamp, Maximum Clamping Range 7.5cm, Generally 4 Right-angle Clamp All Together To Use. Material: Aluminum Type: 4 -inch 20.00 X 10.00 X 10.00 8 Pieces Decorative Realistic Artificial Fruits, Assorted Plastic Fruits And/or Eco-friendly Foam Material 2 Sets Geometric Shapes Set, 8-12 Shapes/forms Wood And/or Non-toxic Plastic Shapes Include Sphere, Square, Cylinder, Round Cylinder, Cone, Cube, Hexagonal Prism, Triangular Prism, Square Based Pyramid, Octagonal Prism, Pentagonal Prism, And 1/2 Sphere 2 Sets Geometric Designer Templates, Scale: 0-20 Cm/0-24 Cm Size : 8-1/4" X 5.1" (l*w) Plastic And/or Steel Material 4 Pieces Stack Rack, Dimension: 30 In H X 21 In W X 17 In L At Least 6 Shelves May Be Wooden Or Metal Materials Devised With Rollers To Roll The Rack In Any Location 4 Pieces Picture Frame And Miter Clamp, Weight: 2.5 Pounds Dimensions: 23.9 X 9 X 1.6 Inches Wood Material 4 Pieces Heat Gun, Power: 2,000 Watts Temperature: 50 / 380 / 570 Celcius Steps: 3 Steps Air Flow: 500 / 300 / 500 L/min 4 Pcs Nozzles (air Blast, Reducing, Reflector, Paint Scraper) 1 Pc Scraper 4 Pieces Hot Plate Single Electric Stove, Power:1000w Non-stick Coating Auto-thermostat Various Heat Operations Operating On/off Indicator Light 2 Pieces Tape Dispenser, Weight: 1 Kg Hard Durable Plastic Material 2 Pieces Multi-function Three-hole Puncher, 11.75 X 2.75 X 2.75 Inches High Quality Metal Construction With Clip-in Rings 2 Pieces Metric Scale, 30 Centimeters In Length Scale: 1:1, 1:10, 1:2, 1:20, 1:5, 1:50, 1:100, 1:200, 1:500, 1:1000, 1:1250 And 1:2500 4 Pieces Steel Tape Measure, Tape Rule With First 6 Feet Reinforced With Bladearmor Coating For Maximum Durability 11-inch Tape Standout; 16-inch And 19.2-inch Stud Center Markings Simplify Framing Jobs Mylar Polyester Film Extends The Life Of The Entire Blade Heat-treated Spring Provides Long Life And Smooth Blade Recoil Stanley's Limited Lifetime ; Measures 1-1/4-inch-by-25-feet 3 Pieces Heavy Duty Circular Saw, Corded Or Cordless Adjustable Depth Diameter: 4 1/2 In. With Electric Brake Maximum Cutting Depth At 45 Degrees: 1 In. Maximum Cutting Depth At 90 Degrees: 1-9/16 In. Maximum Speed: 4500 Rpm Spindle Lock 20 Volt 5.5 Lb. 4 Pieces Abrasive Disc Cutter Machine, Electric Powered 18.5” H X 12.2” W X 21.25” D 2200w 14” Blade Diameter 15 Amps Motor (3600 Rpm) Cutting Capacity Of 4.5” At 90˚ And 45˚ 2 Pieces Manual Canvas Pliers, Specifically Designed For Electrical And Mechanical Works 3 Pcs. In 1 Set 1 Combination Plier 6" 1 Cutter Plier 6" 1 Long Nose 6" Offers Comfortable Hand Grip 3 Set Jet-bow Compass Set, Set Includes 6" Speed Compass With Inter-changeable Pen, Pencil, Divider Parts, And Replaceable Needle Points. 4½" Bow Compass With Inter-changeable Pen, Pencil, And Divider Parts. 6" Beam Bar And Slide Coupling For Circles Up To 28" In Diameter And 6" Friction Divider With Self Centering Gear Head And Replaceable Needle Points. Set Also Includes Mechanical Lead Holder, Slip Handle For Spare Ruling Pen, Lead Pointer, Center Tack, And Screwdriver. Packaged In See-through, Hard Plastic Case. 2 Sets Human Head Model, Plastic, Life-size Anatomical Cast With Removable Jaw And 3 Removable Lower Teeth Type: Skull Model Material: Pvc Dimension: App.21x15x19cm/8.27x5.91x7.48in Color: As The Picture Shown Quantity: 1 Set 1 Set Screw Drivers Set, Philips Or Slotted Sl 3/16 In. X 3 In. (x2), 3/16 In. X 6 In., Sl 1/4 In. 1.5 In., Sl 1/4 In. X 4 In. (x2), Sl 1/4 In. X 6 In. Ph1 X 4 In. (x 2), Ph2 X 1.5 In., Ph2 X 4 In. (x2) 2 Offset Screwdrivers 6 Precision Screwdrivers: Ph0, Ph1, Sl 1.4 Mm, Sl 2 Mm, Sl 2.4 Mm, Sl 3 Mm 2 Sets Pliers And Grip Set, 10 Piece Tray Set Includes 1 Each Of The Following: 10r, 10wr, 7wr, 7r, 7cr, 6ln, 9ln, 5wr, 6r, 11r Weight: 11.80 Lb 28.00 X 11.80 X 1.30 Inches 2 Sets Artist Stool With Wheels, Height Adjustable & 360° Swivel Soft Pu Leather Cushion Detachable Design Dimension: Seat Diameter: 16.2" Seat Height: 25.6"-35.8" Full Height: 37.4"-47.6" Max Weight Capacity: 300lbs 6 Pieces Screen Print Squeegee, Material: Natural Rubber, Wood, Stainless Hardness: 70 Durometer Length: 25cm/10" Width: 10cm/3.9" Thickness: 2.3cm/0.9'' 8 Pieces Mixing Paint Palette, Material: Stainless Color: Silver Size: Approx 6.75" X 5.5"compact 12 Pieces Carving Chisels For Wood, Material: 45# Steel And Wood Color: Wood Color + Silver Quantity: 12 Pcs Total Weight : 892 Kg Wooden Handle Length Of Each Chisel: 95mm/3.74” Total Length Pf Each Chisel: 20.5mm / 8.07” Size: 1x V-straight Parting Tool: 14.6mm / 0.57” 1x Round Nose Chisel: 7.8 / 0.31 1x Skew Wood Turning Chisel: 7.8mm / 0.31” 1x Bent Chisel: 7.8mm / 0.31” 1x Wood Chisel: 7.8mm / 0.31” 1x Skew Wood Turning Chisel: 8mm / 0.31” 1x Pointed Wood Chisel: 8mm / 0.31” 2x Straight Chisel: 7.8mm 13.7mm”/ 0.31” 0.54” 3x Straight Gouge: 12.8” 16.1mm 11.7mm/ 0.50” 0.63” 0.46” 2 Sets Files Set For Jeweler, Wood Carving, Craft Metal And Glass Stone, 10 Pcs / Set 5x180mm Stone Precision Needle Files Tool Woodworking Carving The Craft Metal Rasp Wood Hand Tools Material: Metal Color: Gray/ Silver Model: Needle Files Size : 14.5x1x1 Weight: 0.05 Kg 2 Sets Heavy Duty Multi-purpose Bench Vise, Jaw Width: 5", Opening: 4-1/4" Durable Cast Steel Construction Head Swivel 360 Degree Full 360-degree Rotational Jaws Unique "v" Jaws Provide 4 Point Holding Power 2 Pieces Anvil, Weight: 55 Lbs. (sculpture) 9 Lbs. (jewelry Works) Metalsmith, Jewelers Forming Tool, Essential For Jewelry Repair, Shaping, Flattening, Hardening Metals Material: Iron Surface Size: (l X W X H): Approx. 6 X 3.3 X 9cm/2.36 X 1.3 X 3.54inch, Height: Approx. 5.5cm/2.17inch 1 Piece Welding Protective Suite, Made Of High-quality Denim Material, It Can Be Worn Many Times, It Will Not Fade For A Long Time. Unique And Comfortable Design, Wear-resistance And Dirty Resistance. Reinforced And Stitched The Crotch, Cuffs, Pockets To Prevent Accidental Tearing. The Highly Elastic Cuffs Make It Comfortable And Convenient To Wear. Size: 170 Height: 168-173cm Waist: 76-84cm/29.9-33 Inches Weight: 57.5-135kg 5 Pieces Welding Apron, Features: Material: Constructed With Artificial Cow Suede Which Is Not Only Durable But Also Flexible, And The Apron Offer Puncture Resistance, Tear Resistance And Cut Resistance. Size: (approx) (lxw) 90x60cm/35.4x23.6inch, Long Full Coverage Apron Protects You Until The Knee When You Are Working. Friendly: The Straps On The Waist Can Be Adjusted To Fit Your Body Better. They Are Designed To Hang Over The Shoulder Which Means That Weight Is Distributed Evenly Over The Shoulders. Never Suffer Neck And Back Pain Again. Pockets: 6 Pockets For Tools And Work Accessories, Include One Cell Phone Pocket And One Pencil Pocket. You Can Put Everything You Need Close To Hand In It Instead Of Constantly Search For Them. The Cell Phone Pocket Is Deep To Prevent The Phone From Falling Out. Application: Not Only For Woodworking And Welding But Also Useful For Many Other Work And Home Tasks Like Bbq And Gardening, Unique Gift Apron For Men, Women, Mothers, Fathers. Specifications: Material: Artificial Cow Suede Color: Yellow Size: (approx) (lxw) 90x60cm/35.4x23.6inch Package Included: 1 Pc X Apron 5 Pieces Welding Hood Caps, Flame Retardant Cloth Full Protection This Welding Hood Offers An Essential Mix Of Durability, Comfort And Protection. The Hood Features A Mesh Lining To Allow Sweat Vapour To Quickly Evaporate The Presoftened, Lightweight, Air Cushioned Fabric For Maximum Comfort. This Hood Can Protect Your Neck, Face And Head From Welding Fire Flash, Splash Very Well. Wear-resistant, Fire-retardant, Spark-proof, Double Protection Of Personal Safety And Sweat Absorption Specification: - Long :approx. 45cm/ 17.72inch - Shoulder Width: Approx. 43cm/16.93inch(xl) 5 Pieces Welding Gloves 10.5" Welding Leather Gloves Hgvc01 *winland* Product Description • Size: 10.5" • Use For Driver, Machining Operator Etc. • All Applications Which Require A High Level Of Anti-skid And Abrasion-resistant • Applying Universally To The Transporting And Cargo Handling Workers, Recycling Work, And Horticulture Workers, Drivers And Etc. • Cow Split Leather Gloves • Full Palm, Full Lining • Made With Top Quality Material For Industrial And Commercial Use 5 Pieces Welding Protective Visitor Glasses, Protective Visitor Glasses: Anti-fog With Uv Protection Glasses Product Name：safety Eyewear Glasses Color：clear, Dark Grey Feature：protective Glasses Lens Color：clear, Dark Grey Style：work Safety Glasses Package：blister Size: 17*17*7cm 5 Pieces Welding Helmet, Ingco Auto Darkening Welding Helmet Ahm009 Viewing Area:90×35mm Cartridge Size:110×90×10mm Arc Sensor:2 Light State:din 4 Dark State:fixed Shade 10 Shade Control:unadjustable Power On/off:fully Automatic Sensitivity Control:unadjustable,auto Uv/ir Protection:din 16 Power Supply:solar Cells. Re-chargeable Battery .no Battery Change Required Switching Time:1/5000s,from Light To Dark Dark To Light:0.15-0.45s Auto Low Amperage Tig:≥20amps(dc), ≥20amps(ac) Operating Tep:-5°c~+55°c Storing Tep:-20°c~+70°c 5 Pieces Welding Mask, Product Details Of Heavy Duty Welding Mask (108x50x3mm) Movable Glass Impacted Resistant Shell Anti Wear Moveable Type Glass Packing: Polybag With Color Sticker 5 Pieces Hard Hat, Hard Safety Helmet With Chin Strap Color: Blue, Orange, White, Yellow Material: Acrylonitrile Butadiene Styrene (abs) Shell, With Six Point Adjustable Ratchet Suspension For Shock Absorbing And Elastic Chinstrap Tough, Lightweight, Durable With Six Point Adjustable Ratchet Suspension For Shock Absorbing And Elastic Chinstrap. A Hard Hat Is A Type Of Helmet Predominantly Used In Workplace Environments Such As Industrial Or Construction Sites To Protect The Head From Injury Due To Falling Objects, Impact With Other Objects, Debris, Rain, And Electric Shock. Durable, Lightweight And Comfortable 12 Pieces Compact Electric Kilns, Degree F (max): 2300°f Cone: 6 Firebrick: 3" Volt: 240 / 208 Watt: 3,600 Ampere: 15 Recommended Breaker (amp): 20 Receptacle: 6-20 Size Interior (wide X High X Deep): 13.5 X 13.25" Size Exterior Including Stand (wide X High X Deep): 22 X 28 X 25.5" Volume (cu Ft.): 1.22 1 Piece Heat Press Transfer Machine, Electric Powered 21.2 X 20.2 X 19.2 In. 220v 1800w 0-400˚f (0-220˚c) 0-999 Sec. 1 Piece Rubber Mallet, Rubber Hammerhead Fiberglass Handle Packing: Color Label Weight: 32oz 4 Pieces Ball Peen Hammer, Material: Fiberglass Handle & Steel Head Size: 16 Ounce Weight: 3.7 Pound 4 Pieces Cutting Mat, Flexible Cutting Mat A2 Size (24 X 18 Inch) Self-healing 5 Layered Double Sided With Marked Pattern And Grids (green) Material: Polyvinyl Chloride Color: Green Item Dimensions: 15 X 15 X 15 Centimeters Shape: Hexagonal Weight: 200 Grams 6 Pieces Heavy Duty Extension Wire, Heavy Duty Extension Power Strip With Safety Switch Protection Socket 4 Meters, Extension 3 Pieces 36” Smart Led Tv, Width 96.74cm, Gross Weight: 10.8 Kg, Net Weight 7.9kg, Height 57.18, Length 7.99cm, Screen Size: 43-inch, Tv Resolution: Full Hd 2 Piece Laptop Computer, Laptop Screen Size: 15 Inches, Graphics Chipset: Integrated, Storage Capacity:512gb, Storage Type: Ssd, Ports/interface: Usb 2.0, Usb 3.0, Vga, Processor Type: Intel Core I7, Number Of Cores: Dual-core, Os:windows, Weight:3 Kg, Battery Capacity 4910mah, Cpu Frequency: 2.9ghz 1 Piece Photo Printer, Wireless Photo All-in-one With Auto Duplex Printing Print, Scan, Copy Auto Duplex Printing Wireless, Wireless Pictbridge, Mopria, Airprint, Direct Wireless Recommended Monthly Print Volume: 30 - 100 Pages Operating System: Win 8 / Win 7 / Vista / Xp, Mac Os X 10.7.5 And Later Borderless Printing: A4 / Letter / 4 X 6" / 5 X 7" / 8 X 10") Standard Paper Input (front Tray): 100 Sheets (a4/ Ltr) / 20 Sheets ( 4 X 6 “ ) Paper Weight: 64 To 105 G/m2 Up To 300 G/m2 Dimension (w X D X H): 449 X 304 X 152 Mm Weight: 5.4 Kg Interface / Connectivity: Usb 2.0 Hi-speed / Wireless Lan /wireless Pictbridge, Direct Wireless Scanner Type: Flatbed 1 Piece Portable Sound System With Microphone, Led Lights 2 Wireless Microphone Wired Microphone / Guitar / Line In Mic Priority Over Voice On/off Line Out Remote Control Usb / Bluetooth / Nfc / Fm Capabilities Frequency Response: 50hz-20khz Power System: Ac Adaptor / 12vdc In / Internal Rechargeable Battery 100v-240v, 60hz Power Supply Adaptor 1 Set 50” Led Tv, Height: 64.42 Cm, Width:111.68cm, Length:5.99cm, Gross Weight:16kg. Screen Size: 50-inch Led, Net Weight: 11.6kg, Tv Resolution: 4k Ultra Hd, Connectivity: Wireless Lan Built-in (wi-fi), Hdmi Ports: 3, Usb Ports:1 2 Piece Soft Box With Stand, 2 Pcs Studio Lighting Softbox 50*70cm, 2 Pcs 2m Light Stand, 2 Pcs 45w Light Bulb, Photography Kit 100-240v, Maximum Height: 200cm/78", Collapsible Height:65cm/32" 2 Pieces Display Panel Board, Product Weight:8kg, Choose Type:fabric,number Of Panels:4,type: Pole And Panel,graphic Type: Loop Nylon, 900x600mm Or 1000x700mm 6 X 900mm Poles 25 Mm Diameter With Clips Weight Approx 11-14kg 1 Piece Magnetic Whiteboard, Size:4x8 (48x96 Inches) Feet, Aluminum Frame,with Sliding Whiteboard Marker/eraser Tray,protective Plastic Rubber Corners 1 Piece Chalkboard, Length: 60.5", Height: 36.5",unit Weight: 24.00 Lbs Per Unit Color: Black Duro-slate Over ¼”hardboard Backing, Full Length Chalk Tray 1 Piece Offline Mini Compressor, 220v 60hz, Type: Single Cylinder Piston Compressor With Air Tank, Power: 1/6hp, Speed: 1700r.p.m, Air Output Per Min/lit.:20-23l/min, Auto Stop, Start At 3bar (43 Psi) Stop At 4bar (57psi), Working Pressure:0-4 Bar, Air Tank:3.0l, Suitable For Airbrush With Nozzle 0.2mm-1.0mm, Weight: 5kg, Dimension: 31x13x31cm 1 Pieces Styrofoam Cutter, Material:plastic, Size:approx. 190x90mm, Power: 2xc Size Battery (not Included), Feature: Electric Wire Needle Shap, Stainless Steel Wire, Hardness And Diameter Of 0.19mm 1 Piece Potter’s Wheel/electric Potter’s Wheel, Detachable Abs Basin, Advanced High-quality Brushless Motor, Rotary Speed:0-300 Rpm, Pottery Wheel: 25cm, Pottery Forming Machine:350w,electric Pottery Wheel With Foot Pedal And Detachable Basin, Rated Voltage: Ac 110v, Wheel Diameter: 25cm (9.8"), Speed: 0-300r/min, Working Noise:,60 Db, Gross Weight: 14kg (31.1 Lb), Package Dimensions (lxwxh) 53x42x35cm (20.8"x16.53"x13.78") 2 Pieces Weather-proof Safety Box Circuit Breaker, Metal Enclosure Panel Box, Weatherproof, Height:300mm, Depth:150mm, Door: 0.8mm, Body: 0.8mm, Plate: 0.8mm, Metal Body,width:400mm 1 Piece Fire Blanket, 120x99x4cm (l X W X H) Woven Glass Fiber 2 Pieces Exhaust Fan, Size: 12" 9" 6" Rpm: 1350, 1320, 1290 Finish: Power Coated 2 Pieces Medicine Cabinet, Stainless 20x26x5 Inch Single Door Medicine Cabinet 1 Piece Smoke Detector, 120 Volts Ionization Sensor, Clamshell Packaging 1 Piece Disposal Bins, 50 Cubic Movable Bins 2 Pieces Abc = 597,951.44

Details: As Of 08 January 2025, Amendment 0002 Has Been Made To:provide Responses To Contractor Inquiries (see Attachment). as Of 30 December 2024, The Following Amendments Have Been Made:1) The Size Standard Statement Has Been Removed And 2) The Project Manager (pm) Has Been Updated To Include R.a. Required. 1. Contract Information: these Contracts Are Procured As A Small Business Set-aside. The Naics Code’s Are 541330 And 541310. the Number One, Two And Three Ranked Small Business Firms Will Be Selected For Negotiations Based On Demonstrated Competence And Qualifications For The Required Work. The Length Of Each Indefinite Delivery Contract (idc) Is A Maximum Of 60 Months And Will Not Include Optional Time Periods. Three (3) Idc’s Will Share $49.9m Total Capacity Of The Matoc. Task Orders Will Be Issued By Negotiated Firm-fixed-price Task Orders To The Most Technically Qualified Offeror In Response To The Task Order Requirement Notification (torn) And Will Be Issued Under The Terms And Conditions Of This Matoc. The Government Guarantees A Minimum Value Of $4,000 Seed Task Order For Each Individual Idc. Labor Rates For Each Discipline, Overhead Rates, And Escalation Factors For Each 1 Year Time Period Will Be Negotiated For Each Basic Idc And Profit Will Be Negotiated For Each Task Order Not For Each Basic Idc. work Distribution Between Idcs: Task Orders (to) Will Be Distributed According To The Experience And Qualifications Of The A-e Firms. The Specific Contractor Chosen For A To Will Be Selected Based On Factors Such As Technical Expertise, Demonstrated Performance, Specific Ability, To Size And Complexity, And Contractor Availability To Complete The To In The Time Required. We Are Going To Have The A-e Firms To Compete Amongst The Highly Qualified Selectees For This Contract. Above All, It Is The Intent Of The New York District To Not Have A “hollow” Contract. three (3) Indefinite Delivery Contracts Will Be Negotiated That Includes Level Of Efforts, Labor Rates For Each Discipline And Overhead Rates For The Contract Period. Profit Will Be Negotiated In Each Task Order Not In The Basic Contract. the Selected Small Business A-e Firms Will Need To Demonstrate Capability To Perform At Least 51% Of The Contract Work Listed Below In Accordance With Ep 715-1, Chapter 3-8 C Which Can Be Found At Http//www.usace.army.mil/publications/eng.pamphlets/ep715-1-7 in Particular, In Order To Be Awarded A Small Business Contract The Concern Will Perform At Least 51 Percent Of The Cost Of The Contract Incurred From Personnel With Its Own Employees. “any Subcontractor And Outside Associates Or Consultants Required By The Contractor (prime A-e Firm) In Connection With The Services Covered By The Contract Will Limit To Individuals Or Firms That Were Specifically Identified And Agreed To During Negotiations The Contractor Shall Obtain The Contracting Officer’s Written Consent Before Making Substitutions For These Subcontractors, Associates Or Consultants”. if A Substitution Is Necessitated By Illness, Death, Or Termination Of Employment For Whatever Reason, The Selected A-e Firm Shall Notify The Contracting Officer In Writing Within 15 Calendar Days After The Concurrences Of Any Of These Events And Provide The Following Information To The Contracting Officer: required Information For Substitution Necessitated By Illness, Death, Or Termination Of Employment For Whatever Reason: The Contractor Shall Provide A Detailed Explanation Of The Circumstances Necessitating The Proposed Substitution, Complete Resumes For The New Proposed Substitutes, And Any Additional Information Requested By The Contracting Officer. Proposed Substitutes Should Have Comparable Qualifications Or Better Qualifications To Those Of The Persons Being Replaced. The Contracting Officer Will Notify The Contractor Within 15 Calendar Days After Receipt Of All Required Information Of The Decision On Substitutions. approximate Award Date: June 2025 the Wages And Benefits Of Services Employees (see Far 22.10) Performing Under This Contract Must Be At Least Equal To Those Determined By The Department Of Labor Under The Service Contract Act, As Determined Relative To The Employee’s Office Location (not Of The Location Of The Work). To Be Eligible For A Contract Award, The Firm Must Be Registered In The Dod Central Contractor Registration (ccr). Registered Via The Ccr Internet Site At Http://www.ccr.gov Or By Contacting The Dod Electronic Commerce Information Center At 1-800-334-3414. 2. Project Information: a-e Services May Include But Not Be Limited To The Following: general Architect Engineering Services To Include Support Of The Milcon Programs, Sustainment, Restoration And Modernization (srm) Program, Iis Program And Other Non-military Construction Programs Within Nan/nad Boundaries. architect Engineering (a-e) Services For Smaller Scale Projects Typically With A Construction Cost Of Approximately $10m Or Less To Include The Following: construction Of New And Renovation/upgrade Of Multiple Hangar/buildings, Maintenance, Training Facilities (hands-on/simulators), Aviation Facilities, Runways And Taxiways, Aircraft Fueling Facilities/distribution, Industrial Facilities, Vehicle Maintenance Facilities, Research & Design Facilities (armament, Munitions And Communications), Munitions And Storage Facilities, Dining Facilities, Academic Labs, Barracks/dormitories, Academic Facilities, Administrative Office Buildings antarctic/cold Region Construction. whole And/or Partial Building Renovations Which Address Interior Re-configuration, Life/safety, Energy Conservation, And Utility Systems. architectural Alterations Which Address New Space Requirements, Programmed Functions Such As: Maintenance, Training Facilities, Storage, Administrative Spaces, And Squad/ops. new Building Exterior And Envelope (cold Region) Shall Follow The Architectural Compatibility Plan Defined At The Base Inclusive Of, Structural Roof Systems, Insulation And Waterproofing, Windows, And Atfp. mechanical/electrical/plumbing (mep): Fire Suppression And Water Supply Systems, Fire Alarm And Mass Notification System, Cybersecurity, Fire Detection/protection/monitoring And Controls, Heating And Ventilation Systems, Plumbing Systems, Electrical Systems, Telecommunication And Cabling Systems, Closed Circuit Television (cctv), Alarm And Card Access Systems, And Public Address Systems. topographic Surveys, Geological Surveys, Geotechnical Investigations, Environmental Investigations, Master Planning Studies, Value Engineering Studies, Field Investigation Studies, Construction Support Services. asbestos And Lead Abatement Services Related To Building Renovation Or Demolition. perform/conduct Design Charrettes Including Eco-charrettes prepare Studies (to Include Building, Energy, Life-cycle Studies) prepare Parametric Designs, To Include Development Of Dd Form 1391 Preparation. site & Infrastructure/seismic Design In Accordance With The Ufc’s development Of Design Criteria And Basis Of Design design Work Analysis And Technical Specifications nepa Documentation And Coordination historic Architecture And Section 106 Consultation preparation Of Permit Applications. preparation Of Design/build Documents preparation Of Arctic Foundation Designs, Building Air Tightness And Hvac Performance For Cold/arctic Regions. preparation Of Designs Including Hemp And Scif Areas. preparation Final Design Construction Documents antiterrorism/force Protection Design In Accordance With Applicable Ufc’s sustainable Design/gbi/net Zero Strategy Development cost Estimating Using The Latest Version Mii [m2] Software. value Engineering Studies And Cost Schedule Risk Analysis (csra). preparation Of Deliverables In Building Information Modeling (bim) Format. drawings In Accordance With The Architectural/engineering/construction (a/e/c) Computer-aided Standard Version (cadd) demonstrated Construction Phase Services: design During Construction preparation Of Operation And Maintenance Manuals providing Technical Assistance – Responding To Requests For Information (rfis) design Build Conformance Reviews shop Drawing Review – Review Of Shop Drawings And Submittals conduct Site Visits commissioning/enhanced Commissioning; Fit-up Design Support project Start-up – Coordinate With Contractors To Start Up And Conduct Performance Tests Of The Constructed Project. projects Designed Under These Contracts May Require Designers To Obtain Security Clearances As Well As Having Physical Security Measures In Place Before A Firm Can Do The Work. Security Clearances Are Not Required At The Time Of Selection Or Award Of A Contract. 3. Selection Criteria: primary Selection Criteria: the Selection Criteria Are Listed Below In Descending Order Of Importance (first By Major Criterion And Then By Each Sub-criterion). criteria A Through E Are Primary Selection Criteria. criteria F Through H Are Secondary Selection Criteria And Will Only Be Used As Tiebreakers Among Technically Equal Firms. the Firm Is Required To Have The Following Specific Design Capabilities: a. Specialized Experience And Technical Competence In: submit At Least Five (5) Example Projects In Sf-330 Section F That Demonstrates Experience With The Following: Building (whole And/or Partial) Renovation Design That Includes At Least Five (5) Of The Following Design Elements As A Substantial Part Of The Design (replacement Of Architectural Elements, Interior Re-configuration, Building Seismic Upgrade, Anti-terrorism/force Protection Upgrades, Mechanical Systems, Hvac Systems, Electrical Upgrades, Fire Protection/detection Systems, Exterior Envelope Upgrades Including Roof, Windows And Walls, Asbestos And Lead Abatement.). The Projects Shall Demonstrate The A/e’s Ability To Execute Design Charrettes, Concept Designs, Final Designs And Prepare Final Construction Bid Documents. Projects May Include The Following Facility Types: Academic Facilities, Administrative Facilities, Barracks, Research And Development Facilities, Manufacturing Facilities, Hangers, Maintenance Facilities And Training Facilities. The Ae Shall Identify The Month And Year The 100% Final Design Was Completed. The Ae Shall Identify The Month And Year The Construction Was Completed. Projects Shall Have A Construction Cost Of Approximately $10m. Construction Of The Projects Must Be Completed After January 2017. Projects Completed Before January 2017 Will Not Be Considered. submit At Least Three (3) Example Projects In Sf-330 Section F That Demonstrates Experience With The Following: Infrastructure Type Design That Includes At Least Three (3) Of The Following Design Elements As A Substantial Part Of The Design. The Ae Shall Demonstrate Experience In Planning, Designing And Preparing 100% Construction Bid Documents. Projects May Include The Following Project Types (each Example Project Shall Represent A Different Project Type): Road/parking Replacement/repairs, Utility Infrastructure Replacement/repairs, Utility Central Plant Upgrades/repairs, And Retaining Wall Upgrades/repairs. The Ae Shall Identify The Month And Year The 100% Final Design Was Completed. The Ae Shall Identify The Month And Year The Construction Was Completed. Projects Shall Have A Construction Cost Of At Least $5m. Construction Of The Projects Must Be Completed After January 2017. Projects Completed Before January 2017 Will Not Be Considered. submit At Least Two (2) Example Projects In Sf-330 Section F That Demonstrates Experience With The Following: Design Of New Facilities. The Ae Shall Demonstrate Experience In Sustainable Design Using An Integrated Design Approach And Emphasizing Environmental Stewardship, With Experience In Energy And Water Conservation And Efficiency; And Employing The Leed Evaluation And Certification Methods. The Projects Shall Demonstrate The A/e’s Ability To Execute Design Charrettes, Concept Designs, Final Designs And Prepare Final Construction Bid Documents. Projects May Include The Following Facility Types: Academic Facilities, Administrative Facilities, Barracks, Research And Development Facilities, Manufacturing Facilities, Hangers, Maintenance Facilities And Training Facilities And Training Facilities. The Ae Shall Identify The Month And Year The 100% Final Design Was Completed. The Ae Shall Identify The Month And Year The Construction Was Completed. Projects Shall Have A Construction Cost Of Approximately $10m. Construction Of The Projects Must Be Completed After January 2017. Projects Completed Before January 2017 Will Not Be Considered. the Above Requested Projects Shall Also Demonstrate The A/e’s Abilities With All Of The Following: - Planning And Scheduling Management Of Fast Track Designs, - Working On Military Installation Projects, - Prepare Cost Estimates Using Mii And Paces, (the Cost Estimator And/or The Subcontractor Should Demonstrate Familiarity With The Changing Dynamics Of The Current Construction Market In The Tri-state New York Area With Particular Emphasis On The Southern New Jersey), - Preparing Drawings In Autocad And Autocad Revit, - Experience In The Ability To Provide A Qa/qc Plan Indicating How The Prime Plans To Manage Their Team To Ensure That Quality Products Are Prepared. Demonstrate Ability To Produce Quality Designs. Evaluation Will Be Based On The Firm's Design Quality Management Plan (dqmp) And Will Consider The Management Approach, Coordination Of Disciplines, Management Of Subcontractors And Quality Control Procedures. on All Ten (10) Example Projects, The Government May Consider The Following Strengths For Evaluation Purposes: projects Demonstrating Experience Working At Military Installations Within Nan Boundaries. projects Demonstrating Experience Working With Nydec And Njdep In Obtaining Environmental Permits. projects Demonstrating Experience With Sustainable Design And Achieving Leed Silver Or Better. projects Demonstrating Experience Working Mcaces Paces And Pax/dd1391. projects Demonstrating Experience With Fast-tracked Designs. projects Demonstrating Experience Utilizing A Design Quality Control Plan projects Demonstrating Experience In Permitting, Real Estate Actions, Nepa Documentation, And Other Agency Coordination Tasks. b. Qualified Registered Professional Personnel In The Following Key Disciplines: project Manager (p.e. Or R.a. Required) quality Assurance Manager (p.e. Or R.a. Required) architecture (r.a. Required) structural Engineering (p.e. Required) civil Engineering (p.e. Required) mechanical Engineering (p.e. Required) electrical Engineering (p.e. Required) fire Protection Engineering (p.e. Required) landscape Architect (r.la. Required) cost Engineering (p.e. Required. Those With Ccp/cpe Certification Will Be Considered A Strength) geotechnical Engineering (p.e. Required) certified Industrial Hygienist (cih Required) licensed Interior Designer (ncid Required) land Surveyor (p.l.s. Required) anti-terrorism/force Protection Specialist (p.e. Required) blast/explosives Safety Engineering (p.e. Required) industrial Engineering (p.e. Required) industrial/process Engineer (p.e. Required) lean-six Sigma Professional historic Preservationist environmental Engineering (p.e. Required) lead Commissioning Specialist (p.e And At Least One Of The Following: A Nebb Qualified Systems Commissioning Administrator (sca); Acg Certified Commissioning Authority (cxa); Icb/tabb Certified Commissioning Supervisor; Bca Certified Commissioning Professional (ccp); Aee Certified Building Commissioning Professional (cbcp); University Of Wisconsin-madison Qualified Commissioning Process Provider (qcxp); Ashrae Commissioning Process Management Professional (cpmp)) certified Value Specialist (cvs Required) telecommunications Engineering (rccd Required) master Planner (p.e. Or R.a. Required) the Evaluations Will Consider Education, Training, Registration, Voluntary Certificates, Overall And Relevant Experience, And Longevity With The Firm Using Information From Section E Of The Sf 330. The Sf 330 Includes A Matrix In Section G Showing Experience Of The Proposed Lead Designers On The Projects Listed In Section F Of The Sf 330. senior Project Personnel For Each Discipline Are Required To Be Licensed And/or Registered. additional Disciplines May Be Submitted As Required By The Ae For This Type/size Project And Will Be Evaluated As The Above. fire Protection Engineering: The Services And Qualifications Of Fire Protection Engineers Are Shown In Section 1.6 Of Ufc 3-600-01, And Are Reiterated Here: A Qualified Fire Protection Engineer Shall Be An Integral Part Of The Design As It Relates To Fire Protection. This Includes, But Is Not Limited To, Building Code Analysis, Life Safety Code Analysis, Design Of Automatic Detection And Suppression Systems, Water Supply Analysis, And A Multi-discipline Review Of The Entire Project. For The Purposes Of Meeting This Requirement A Qualified Fire Protection Engineer Is Defined As An Individual Meeting One Of The Following Conditions: i.) A Registered Professional Engineer (p.e.) Having A Bachelor Of Science Or Master Of Science Degree In Fire Protection Engineering, From An Accredited University Engineering Program, Plus A Minimum Of 5 Years’ Work Experience In Fire Protection Engineering. ii.) A Registered Professional Engineer (p.e.) Who Has Passed The National Council Of Examiners For Engineering And Surveys (ncees) Fire Protection Engineering Written examination. iii.) A Registered Professional Engineer (p.e.) In A Related Engineering Discipline With A Minimum Of 5 Years’ Experience, Dedicated To Fire Protection Engineering That Can Be Verified With Documentation. the Ae And Their Subconsultants Must Be A U.s. Company(ies). The Ae’s Team Must Use Only U.s. Citizens Or U.s. Persons (an Individual Who Has Been Lawfully Admitted For Permanent Residence As Defined In 8 U.s.c. § 1101(a)(20) Or Who Is A Protected Individual As Defined By Title 8 U.s.c. § 1324b (a)(3)). The A-e’s Team Must Be Able To Obtain Visitor Registration Documents/passes To Access Any Military Base And/or Federal Facility Under This Contract. c. Past Performance On Dod And Other Contracts With Respect To Cost Control, Quality Of Work And Compliance With Performance Schedules, As Determined From References, Other Sources And Cpars. Letters Of Recommendation From Customers Addressing Your Firm’s Cost Control, Quality Of Work And Schedule Compliance Capabilities May Be Included In Section H Of The Sf 330. Letters Should Be For Projects Of A Similar Nature And Shall Be No Older Than Three Years To Be Considered. d. Capacity To Initiate Work And Complete Within The Time Parameters Of The Project. The Evaluation Will Consider The Availability Of An Adequate Number Of Personnel In All Key Disciplines. The Evaluation Will Review Part Ii Of The Sf330 To Evaluate The Overall Capacity Of The Team. Include A Part Ii Form Of The Sf 330 For Each Firm And Each Office Of Each Firm That Is Part Of The Proposed Team. e. Knowledge Of The Locality In The General Geographical Area Of Ny District Boundaries. The Evaluators Will Review Projects Identified In Section F, The Specific Experience Of The Listed Key Discipline In Section E And Additional Information In Section H In Order Of Preference. secondary Selection Criteria: f. Geographic Proximity In Relation To Ny District Boundaries. g. Volume Of Work Previously Awarded To The Firm By The Department Of Defense, With The Object Of Effecting An Equitable Distribution Among Qualified A/e Firms, Including Small Business, Veteran-owned Small Business, Service-disabled Small Business, Hubzone Small Business, Small Disadvantaged Small Business And Woman-owned Small Business And Minority Institutions And Firms That Have Not Had Prior Dod Contracts. 4. Submission Requirements: interested Prime Firms Having The Capabilities To Perform These Services Must Submit Their Sf330 To Stephen Dibari By Email Stephen.dibari@usace.army.mil Maximum File Size Is 25 Mb If Overall Sf330 Is Larger Than 25 Mb, Please Break Up The File Into Smaller Separate Files. no Hard Copies Of Sf-330’s Will Be Required. Do Not Mail Sf-330’s (cd Or Hard Copies) To The Contract Specialist Nor To Stephen Dibari At 26 Federal Plaza. Doing So, Will Delay The Ae Selection/award Process. the Sf 330 Can Be Found By Searching For Sf330 On The Following Gsa Website: Https://www.gsa.gov/forms the Forms Can Be Downloaded In A .pdf File Type. Total Submittal Page Limitation Is 85 Pages. Section E Is Limited To 50 Pages. Section F Is Limited To 10 Pages (1 Page Per Project). Each Page Shall Be Numbered. Section Dividers, Front And Back Covers, Cover Letter And Part Ii Of The Sf 330 Don’t Count Towards Overall Page Limit. Tabloid Size Paper 11” X 17” Pages For Organizational Chart Or Other Graphics Will Count As One Page. Submittals Not Following These Instructions, May Not Be Evaluated By The Board. supplemental Information On The Sf 330 Is Posted On The Ny District Usace Website: Https://www.nan.usace.army.mil/business-with-us/engineering-division/ submittals Will Not Be Accepted After 2:00 Pm On The Response Date Shown In The Advertisement In The Https://sam.gov/. If The Response Date Falls On A Saturday, Sunday, Or A Federal Holiday, The Response Date Will Move To The Next Business Day. for Questions Regarding This Contract, Contact Stephen.dibari@usace.army.mil if A Pre-selection Meeting Is Required, Notifications Will Not Be Sent After Approval Of The Pre-selection. Notification Of All Firms Will Be Made Within Ten (10) Calendar Days After Selection Approval. In Addition To The Two (2) Items Listed Above, The Remaining Info On Release Of Information On Firm Selection Shall Be In Accordance With Uai Subpart 5.4 (usace Acquisition Instructions). interviews (discussions) Will Be Held With All The Most Highly Qualified Firms As Required By Far 36.602-3(c). All Firms Will Be Interviewed By The Same Method (telephone, Video Teleconference Or In Person). Firms Will Be Given Sufficient Advance Notice To Allow Representatives To Participate In The Interviews Or Presentations. All Firms Will Be Asked Similar Questions. The Questions Will Be Related To The Announced Selection Criteria Including But Not Limited To, Their Experience, Capabilities, Capacity, Organization, Management, Quality Control Procedures And Approach For This Project. firms Must Be Registered In The Following: Https://www.sam.gov/ naics Code’s Are 541330 And 541310. interviews (discussions) Will Be Held With All The Most Highly Qualified Firms As Required By Far 36.602-3(c). All Firms Will Be Interviewed By The Same Method (telephone, Video Teleconference Or In Person). Firms Will Be Given Sufficient Advance Notice To Allow Representatives To Participate In The Interviews Or Presentations. All Firms Will Be Asked Similar Questions. The Questions Will Be Related To The Announced Selection Criteria Including But Not Limited To, Their Experience, Capabilities, Capacity, Organization, Management, Quality Control Procedures And Approach For This Project.

Details: The United States Coast Guard Surface Forces Logistics Center Has A Requirement To Open, Inspect, Report And Possible Overhaul Of The Below Item And Is Requesting Quotations: 1. This Is A Combined Synopsis/solicitation For Commercial Items Prepared In Accordance With The Format Outlined In Far Subpart 12.6, And As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Quotes Are Being Requested And A Written Solicitation Will Not Be Issued. 2. Solicitation Number 70z04025qzb018 Is Issued As A Request For Quotation (rfq). This Solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular (fac) 2025-02, Dated January 3, 2025. It Is Anticipated That A Competitive Price Purchase Order Shall Be Awarded Because Of This Synopsis/solicitation. All Responsible Sources May Submit A Quotation Which If Timely Received, Shall Be Considered By This Agency. 3. This Acquisition Will Be Issued Under Naics 811210. 4. Nsn: 5895-12-395-9484 Control Monitor oem: Rolls-royce Solutions Gmbh pn: B00e50207391/s0002 qty: 3 Ea open, Inspect, Report With Possible Repair In Accordance With The Overhaul Description And Oem Specs. inspection Cost $__________ Each (this Cost Will Be Paid If Items Are Beyond Economic Repair) firm Fixed Repair Price $___________ Each. 5. These Parts Are Used For The U. S. Coast Guard Patrol Boat Product Line. Substitute Parts Or Part Numbers Are Not Acceptable. The Uscg Does Not Own The Rights To The Proprietary Data And Therefore Cannot Provide Drawings, Specifications, Or Schematics For These Parts. It Is The Government’s Belief That Only Rolls-royce Solutions Gmbh And Or Their Authorized Repair Facility Can Obtain The Required Technical And Engineering Data, And Genuine Oem Parts, Required To Successfully Repair These Items. Concerns Having The Expertise And Required Capabilities To Repair These Items Are Invited To Submit Complete Information Discussing The Same With Three (3) Calendar Days From The Day This Notice Is Posted. The Information Submitted Must Include A Letter From The Oem Verifying The Offeror Is An Authorized Repair Facility And Verifying The Oem Will Supply Only Genuine Oem Parts. 6. Packing And Marking: each Unit Shall Be Individually Preserved And Wrapped For Protection Against Deterioration For A Period Of 2 Years Minimum. Each Unit Shall Be Packed Individually In It’s Own Wooden Box Which Shall Be Capable Of Providing Adequate Protection To The Item During Multiple Shipments. Mare Each Box In Legible Black Print Lettering With The Following Information. national Stock Number 5895-12-395-9484 item Name Control-monitor part Number X00e50204217/s0002 gov’t Order Number 70z08025p29****** coast Guard Sflc Material, Condition Code “a” 7. Delivery: delivery Is Required 02 Dec 2025. Please Provide Your Proposed Delivery To Address Below. Deliveries Are To Be Made Monday Through Friday Between The Hours Of 7:00 Am To 1:00 Pm. delivery Shall Be F.o.b. Destination To: united States Coast Guard (sflc) receiving Room, Bldg. #88 2401 Hawkins Point Road baltimore, Md 21226. estimated Delivery Date: _________________ 8. Inspection And Acceptance: F.o.b. Destination inspection And Acceptance Shall Take Place After Verification Of Preservation, Individual Packaging And Marking Requirements And Confirmation Of No Damage During Transit. Failure To Comply With Packaging Requirements Will Result In Rejection And Nonpayment. the Provision At 52.212-1, Instructions To Offerors-commercial, Applies To This Acquisition. In Addition, The Following Language Applies To This Provision: 9. Multiple Awards Will Not Be Made. Vendor Shall Provide An All-or-nothing Quote For The Requirement Identified In (5) Above. 10. Award Will Be Made To The Lowest Price Offeror, That Is Deemed Technical Acceptable. the Contractor Shall Provide A Total Firm Fixed Price With Inspection Fee For All Necessary Equipment And Shipping Cost To Addresses Shown Under Delivery. vendor Must Be Registered At Https://www.sam.gov Prior To Quote Submittal. each Offeror’s Record In Fapiis Will Be Reviewed Prior To Award. Award Will Not Be Made To Any Offeror Who Has Any Adverse Financial Information Or Exclusions. 11. Offerors Shall Include A Completed Copy Of The Provision At 52.212-3, Offeror Representations And Certifications-commercial Products And Commercial Services (may 2024), With Their Offer, If This Information Is Not Already Included In Https://www.sam.gov. 12. The Clause At 52.212-4, Contract Terms And Conditions-commercial Items (nov 2023), Applies To This Acquisition. 13. Far 52.212-5 Contract Terms And Conditions Required To Implement Statues Or Executive Orders-commercial Product And Commercial Services (jan 2025) (a)the Contractorshallcomply With The Following Federalacquisitionregulation (far) Clauses, Which Are Incorporated In This Contract By Reference, To Implement Provisions Of Law Or Executive Orders Applicable Toacquisitionsofcommercial Productsandcommercial Services: (1)52.203-19, Prohibition On Requiring Certain Internal Confidentiality Agreements Or Statements(jan 2017)(section 743 Of Division E, Title Vii, Of The Consolidated And Further Continuing Appropriations Act, 2015 (pub. L. 113-235) And Its Successor Provisions In Subsequent Appropriations Acts (and As Extended In Continuing Resolutions)). (2)52.204-23, Prohibition Oncontractingfor Hardware, Software, And Services Developed Or Provided By Kaspersky Lab Covered Entities(dec 2023)(section 1634 Of Pub. L. 115-91). (3)52.204-25, Prohibition Oncontractingfor Certain Telecommunications And Video Surveillance Services Or Equipment.(nov 2021)(section 889(a)(1)(a) Of Pub. L. 115-232). (4)52.209-10, Prohibition Oncontractingwith Inverted Domestic Corporations(nov 2015). (5)52.232-40, Providing Accelerated Payments Tosmall Business Subcontractors(mar 2023)(31 U.s.c. 3903and10 U.s.c. 3801). (6)52.233-3, Protest After Award(aug 1996)(31u.s.c.3553). (7)52.233-4, Applicable Law For Breach Of Contractclaim(oct 2004)(public Laws 108-77 And 108-78 (19u.s.c.3805note)). (b)the Contractorshallcomply With The Far Clauses In This Paragraph (b) That Thecontracting Officerhas Indicated As Being Incorporated In This Contract By Reference To Implement Provisions Of Law Or Executive Orders Applicable Toacquisitionsofcommercial Productsandcommercial Services: [contracting Officercheck As Appropriate.] x(1)52.203-6, Restrictions On Subcontractor Sales To The Government(jun 2020),withalternatei(nov 2021)(41u.s.c.4704and10 U.s.c. 4655). __(2)52.203-13, Contractor Code Of Business Ethics And Conduct(nov 2021)(41u.s.c.3509)). __(3)52.203-15, Whistleblower Protections Under The American Recovery And Reinvestment Act Of 2009(jun 2010)(section 1553 Of Pub. L. 111-5). (applies To Contracts Funded By The American Recovery And Reinvestment Act Of 2009.) __(4)52.203-17, Contractor Employee Whistleblower Rights(nov 2023)(41 U.s.c. 4712); This Clause Does Not Apply To Contracts Of Dod, Nasa, The Coast Guard, Or Applicable Elements Of The Intelligence Community—see Far3.900(a). __(5)52.204-10, Reporting Executive Compensation And First-tier Subcontract Awards(jun 2020)(pub. L. 109-282) (31u.s.c.6101note). __(6)[reserved]. __(7)52.204-14, Service Contract Reporting Requirements(oct 2016)(pub. L. 111-117, Section 743 Of Div. C). __(8)52.204-15, Service Contract Reporting Requirements For Indefinite-delivery Contracts(oct 2016)(pub. L. 111-117, Section 743 Of Div. C). __(9)52.204-27, Prohibition On A Bytedance Covered Application(jun 2023)(section 102 Of Division R Of Pub. L. 117-328). __(10)52.204-28, Federalacquisitionsupply Chain Security Act Orders—federal Supply Schedules, Governmentwideacquisitioncontracts, And Multi-agency Contracts.(dec 2023)(pub. L. 115–390, Title Ii). __(11)(i)52.204-30, Federalacquisitionsupply Chain Security Act Orders—prohibition.(dec 2023)(pub. L. 115–390, Title Ii). __(ii)alternatei(dec 2023)of 52.204–30. x(12)52.209-6, Protecting The Government’s Interest When Subcontracting With Contractors Debarred, Suspended, Or Proposed Fordebarment.(nov 2021)(31u.s.c.6101note). __(13)52.209-9, Updates Of Publicly Available Information Regarding Responsibility Matters(oct 2018)(41u.s.c.2313). __(14)[reserved]. __(15)52.219-3, Notice Ofhubzoneset-aside Or Sole-source Award (oct 2022) (15u.s.c.657a). __(16)52.219-4, Notice Of Price Evaluation Preference Forhubzonesmall Business Concerns (oct 2022) (if Theofferorelects To Waive The Preference, Itshallso Indicate In Itsoffer) (15u.s.c.657a). __(17)[reserved] __(18)(i)52.219-6, Notice Of Total Small Business Set-aside(nov 2020)(15u.s.c.644). __(ii)alternatei(mar 2020)of52.219-6. __(19)(i)52.219-7, Notice Of Partial Small Business Set-aside(nov 2020)(15u.s.c.644). __(ii)alternatei(mar 2020)of52.219-7. __(20)52.219-8, Utilization Of Small Business Concerns (feb 2024) (15u.s.c.637(d)(2)and (3)). __(21)(i)52.219-9, Small Business Subcontracting Plan (sep 2023) (15u.s.c.637(d)(4)). __(ii)alternatei(nov 2016)of52.219-9. __(iii)alternateii(nov 2016)of52.219-9. __(iv)alternateiii(jun 2020)of52.219-9. __(v)alternateiv (sep 2023) Of52.219-9. __(22)(i)52.219-13, Notice Of Set-aside Of Orders(mar 2020)(15u.s.c.644(r)). __(ii)alternatei(mar 2020)of52.219-13. __(23)52.219-14, Limitations On Subcontracting (oct 2022) (15u.s.c.637s). __(24)52.219-16, Liquidated Damages—subcontracting Plan(sep 2021)(15u.s.c.637(d)(4)(f)(i)). __(25)52.219-27, Notice Of Set-aside For, Or Sole-source Award To, Service-disabled Veteran-owned Small Business (sdvosb) Concerns Eligible Under The Sdvosb Program (feb 2024) (15u.s.c.657f). __(26)(i)52.219-28, Post Award Small Business Program Rerepresentation (feb 2024) (15u.s.c.632(a)(2)). __(ii)alternatei(mar 2020)of52.219-28. __(27)52.219-29, Notice Of Set-aside For, Or Sole-source Award To, Economically Disadvantagedwomen-owned Small Business Concerns(oct 2022) (15u.s.c.637(m)). __(28)52.219-30, Notice Of Set-aside For, Or Sole-source Award To, Women-owned Small Business Concerns Eligible Under The Women-owned Small Business Program (oct 2022) (15u.s.c.637(m)). __(29)52.219-32, Orders Issued Directly Under Small Business Reserves(mar 2020)(15u.s.c.644(r)). __(30)52.219-33, Nonmanufacturer Rule(sep 2021)(15u.s.c. 637(a)(17)). x(31)52.222-3, Convict Labor(jun 2003)(e.o.11755). x(32)52.222-19, Child Labor-cooperation With Authorities And Remedies(feb 2024). x (33)52.222-21, Prohibition Of Segregated Facilities(apr 2015). x(34)(i)52.222-26, Equal Opportunity(sep 2016)(e.o.11246). __(ii)alternatei(feb 1999)of52.222-26. __(35)(i)52.222-35, Equal Opportunity For Veterans(jun 2020)(38u.s.c.4212). __(ii)alternatei(jul 2014)of52.222-35. x(36)(i)52.222-36, Equal Opportunity For Workers With Disabilities(jun 2020)(29u.s.c.793). __(ii)alternatei(jul 2014)of52.222-36. __(37)52.222-37, Employment Reports On Veterans (jun 2020) (38u.s.c.4212). __(38)52.222-40, Notification Of Employee Rights Under The National Labor Relations Act(dec 2010)(e.o. 13496). __(39)(i)52.222-50, Combating Trafficking In Persons(nov 2021)(22u.s.c.chapter78and E.o. 13627). __(ii)alternatei(mar 2015)of52.222-50(22u.s.c.chapter78and E.o. 13627). x(40)52.222-54, Employment Eligibility Verification(may2022)(executive Order 12989). (not Applicable To Theacquisitionof Commercially Available Off-the-shelf Items Or Certain Other Types Ofcommercial Productsorcommercial Servicesas Prescribed In Far22.1803.) __(41)(i)52.223-9, Estimate Of Percentage Ofrecovered Materialcontent For Epa–designated Items (may2008) (42u.s.c.6962(c)(3)(a)(ii)). (not Applicable To Theacquisitionof Commercially Available Off-the-shelf Items.) __(ii)alternatei(may2008)of52.223-9(42u.s.c.6962(i)(2)(c)). (not Applicable To Theacquisitionof Commercially Available Off-the-shelf Items.) __(42)52.223-11,ozone-depleting Substancesandhigh Global Warming Potential Hydrofluorocarbons(may 2024) (e.o. 13693). __(43)52.223-12, Maintenance, Service, Repair, Or Disposal Of Refrigeration Equipment And Air Conditioners(may 2024)(e.o. 13693). __(49)52.223-20, Aerosols(may 2024)(e.o. 13693). __(50)52.223-21, Foams (may 2024) (e.o. 13693). __(51)(i)52.224-3privacy Training(may 2024)(5 U.s.c. 552 A). __(ii)alternatei(jan 2017)of52.224-3. __(52)(i)52.225-1, Buy American-supplies(oct 2022)(41u.s.c.chapter83). __(ii)alternatei(oct 2022)of52.225-1. x(53)(i)52.225-3, Buy American-free Trade Agreements-israeli Trade Act(nov 2023)(19 U.s.c. 3301 Note,19 U.s.c. 2112 Note,19 U.s.c. 3805 Note,19 U.s.c. 4001 Note, 19 U.s.c. Chapter 29 (sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, And 112-43. __(ii)alternatei [reserved]. __(iii)alternateii(jan 2025)of52.225-3. __(iv)alternateiii(nov 2023)of52.225-3. __(v)alternateiv (oct 2022) Of52.225-3. __(54)52.225-5, Trade Agreements(nov 2023)(19u.s.c.2501,et Seq.,19u.s.c.3301note). x(55)52.225-13, Restrictions On Certain Foreign Purchases(feb 2021)(e.o.’s, Proclamations, And Statutes Administered By The Office Of Foreign Assets Control Of The Department Of The Treasury). __(56)52.225-26, Contractors Performing Private Security Functions Outside Theunited States(oct 2016) (section 862, As Amended, Of Thenational Defenseauthorization Act For Fiscal Year 2008; 10 U.s.c. Subtitle A, Part V, Subpart G Note). __(57)52.226-4, Notice Of Disaster Oremergencyarea Set-aside (nov 2007) (42u.s.c.5150). __(58)52.226-5, Restrictions On Subcontracting Outside Disaster Oremergencyarea (nov2007) (42u.s.c.5150). __(59)52.229-12, Tax On Certain Foreignprocurements(feb 2021). __(60)52.232-29, Terms For Financing Of Purchases Ofcommercial Productsandcommercial Services(nov 2021)(41u.s.c.4505,10 U.s.c. 3805). __(61)52.232-30, Installment Payments Forcommercial Productsandcommercial Services(nov 2021)(41u.s.c.4505,10 U.s.c. 3805). x(62)52.232-33, Payment Byelectronic Funds Transfer-system For Award Management(oct2018)(31u.s.c.3332). __(63)52.232-34, Payment Byelectronic Funds Transfer-other Thansystem For Award Management(jul 2013) (31u.s.c.3332). __(64)52.232-36, Payment By Third Party(may2014)(31u.s.c.3332). __(65)52.239-1, Privacy Or Security Safeguards(aug 1996)(5u.s.c.552a). __(66)52.242-5, Payments Tosmall Business Subcontractors(jan 2017)(15u.s.c.637(d)(13)). __(67)(i)52.247-64, Preference For Privately Owned U.s.-flag Commercial Vessels(nov 2021)(46 U.s.c. 55305and10u.s.c.2631). __(ii)alternatei(apr 2003)of52.247-64. __(iii)alternateii(nov 2021)of52.247-64. (c)the Contractorshallcomply With The Far Clauses In This Paragraph (c), Applicable Tocommercial Services, That Thecontracting Officerhas Indicated As Being Incorporated In This Contract By Reference To Implement Provisions Of Law Or Executive Orders Applicable Toacquisitionsofcommercial Productsandcommercial Services: [contracting Officercheck As Appropriate.] x(1)52.222-41, Service Contract Labor Standards(aug 2018)(41u.s.c.chapter67). x(2)52.222-42, Statement Of Equivalent Rates For Federal Hires(may2014)(29u.s.c.206and41u.s.c.chapter67). __(3)52.222-43, Fair Labor Standards Act And Service Contract Labor Standards-price Adjustment (multiple Year Andoptioncontracts)(aug 2018)(29u.s.c.206and41u.s.c.chapter67). __(4)52.222-44, Fair Labor Standards Act And Service Contract Labor Standards-price Adjustment (may2014) (29u.s.c.206and41u.s.c.chapter67). __(5)52.222-51, Exemption From Application Of The Service Contract Labor Standards To Contracts For Maintenance, Calibration, Or Repair Of Certain Equipment-requirements (may2014) (41u.s.c.chapter67). __(6)52.222-53, Exemption From Application Of The Service Contract Labor Standards To Contracts For Certain Services-requirements(may2014)(41u.s.c.chapter67). __(7)52.222-55, Minimum Wages For Contractor Workers Under Executive Order 14026(jan 2022). __(8)52.222-62, Paid Sick Leave Under Executive Order 13706(jan 2022)(e.o. 13706). __(9)52.226-6, Promoting Excess Food Donation To Nonprofit Organizations (jun 2020) (42u.s.c.1792). __(10)52.247-69, Reporting Requirement For U.s.-flag Air Carriers Regarding Training To Prevent Human Trafficking(jan 2025)(49 U.s.c. 40118(g)). (d)comptroller General Examination Of Record. The Contractorshallcomply With The Provisions Of This Paragraph (d) If This Contract Was Awarded Using Other Than Sealed Bid, Is In Excess Of Thesimplified Acquisition Threshold, As Defined In Far2.101, On The Date Of Award Of This Contract, And Does Not Contain The Clause At52.215-2, Audit And Records-negotiation. (1)the Comptroller General Of Theunited States, Or An Authorized Representative Of The Comptroller General,shallhave Access To And Right To Examine Any Of The Contractor’s Directly Pertinent Records Involving Transactions Related To This Contract. (2)the Contractorshallmake Available At Its Offices At All Reasonable Times The Records, Materials, And Other Evidence For Examination, Audit, Or Reproduction, Until 3 Years After Final Payment Under This Contract Or For Any Shorter Period Specified In Far Subpart4.7, Contractor Records Retention, Of The Other Clauses Of This Contract. If This Contract Is Completely Or Partially Terminated, The Records Relating To The Work Terminatedshallbe Made Available For 3 Years After Any Resulting Final Termination Settlement. Records Relating To Appeals Under The Disputes Clause Or To Litigation Or The Settlement Ofclaimsarising Under Or Relating To This Contractshallbe Made Available Until Such Appeals, Litigation, Orclaimsare Finally Resolved. (3)as Used In This Clause, Records Include Books, Documents, Accounting Procedures And Practices, And Other Data, Regardless Of Type And Regardless Of Form. This Does Not Require The Contractor To Create Or Maintain Any Record That The Contractor Does Not Maintain In The Ordinary Course Of Business Or Pursuant To A Provision Of Law. (e)(1)notwithstanding The Requirements Of The Clauses In Paragraphs (a), (b), (c), And (d) Of This Clause, The Contractor Is Not Required To Flow Down Any Far Clause, Other Than Those In This Paragraph (e)(1), In A Subcontract Forcommercial Productsor Commercial Services. Unless Otherwise Indicated Below, The Extent Of The Flow Downshallbe As Required By The Clause- (i)52.203-13, Contractor Code Of Business Ethics And Conduct(nov 2021)(41u.s.c.3509). (ii)52.203-17, Contractor Employee Whistleblower Rights(nov 2023)(41 U.s.c. 4712). (iii)52.203-19, Prohibition On Requiring Certain Internal Confidentiality Agreements Or Statements (jan 2017) (section 743 Of Division E, Title Vii, Of The Consolidated And Further Continuing Appropriations Act, 2015 (pub. L. 113-235) And Its Successor Provisions In Subsequent Appropriations Acts (and As Extended In Continuing Resolutions)). (iv)52.204-23, Prohibition Oncontractingfor Hardware, Software, And Services Developed Or Provided By Kaspersky Lab Covered Entities(dec 2023)(section 1634 Of Pub. L. 115-91). (a)definitions. As Used In This Clause— kaspersky Lab Covered Articlemeans Any Hardware, Software, Or Service That– (1)is Developed Or Provided By Akaspersky Lab Covered Entity; (2)includes Any Hardware, Software, Or Service Developed Or Provided In Whole Or In Part By Akaspersky Lab Covered Entity; Or (3)containscomponentsusing Any Hardware Or Software Developed In Whole Or In Part By Akaspersky Lab Covered Entity. kaspersky Lab Covered Entitymeans– (1)kaspersky Lab; (2)any Successor Entity To Kaspersky Lab, Including Any Change In Name, E.g., “kaspersky”; (3)any Entity That Controls, Is Controlled By, Or Is Under Common Control With Kaspersky Lab; Or (4)any Entity Of Which Kaspersky Lab Has A Majority Ownership. (b)prohibition. Section 1634 Of Division A Of Thenational Defenseauthorization Act For Fiscal Year 2018 (pub. L. 115-91) Prohibits Government Use Of Anykaspersky Lab Covered Article. The Contractor Is Prohibited From— (1)providing Anykaspersky Lab Covered Articlethat The Government Will Use On Or After October 1, 2018; And (2)using Anykaspersky Lab Covered Articleon Or After October 1, 2018, In The Development Of Data Or Deliverables First Produced In The Performance Of The Contract. (c)reporting Requirement. (1)in The Event The Contractoridentifies Akaspersky Lab Covered Articleprovided To The Government During Contract Performance, Or The Contractor Is Notified Of Such By A Subcontractor At Any Tier Or Any Other Source, The Contractorshallreport,in Writing, To Thecontracting Officeror, In The Case Of The Department Of Defense, To The Website Athttps://dibnet.dod.mil. For Indefinite Delivery Contracts, The Contractorshallreport To Thecontracting Officerfor The Indefinite Delivery Contract And Thecontracting Officer(s) For Any Affected Order Or, In The Case Of The Department Of Defense, Identify Both The Indefinite Delivery Contract And Any Affected Orders In The Report Provided Athttps://dibnet.dod.mil. (2)the Contractorshallreport The Following Information Pursuant To Paragraph (c)(1) Of This Clause: (i)within 3 Business Days From The Date Of Such Identification Or Notification: The Contract Number; The Order Number(s), If Applicable; Supplier Name; Brand; Model Number (original Equipment Manufacturer (oem) Number, Manufacturer Part Number, Or Wholesaler Number); Item Description; And Any Readily Available Information About Mitigation Actions Undertaken Or Recommended. (ii)within 10 Business Days Of Submitting The Report Pursuant To Paragraph (c)(1) Of This Clause: Any Further Available Information About Mitigation Actions Undertaken Or Recommended. In Addition, The Contractorshalldescribe The Efforts It Undertook To Prevent Use Or Submission Of Akaspersky Lab Covered Article, Any Reasons That Led To The Use Or Submission Of Thekaspersky Lab Covered Article, And Any Additional Efforts That Will Be Incorporated To Prevent Future Use Or Submission Ofkaspersky Lab Covered Articles. (d)subcontracts. The Contractorshallinsert The Substance Of This Clause, Including This Paragraph (d), In All Subcontracts Including Subcontracts For Theacquisitionofcommercial Productsorcommercial Services. (v)52.204-25, Prohibition Oncontractingfor Certain Telecommunications And Video Surveillance Services Or Equipment (nov 2021)(section 889(a)(1)(a) Of Pub. L. 115-232. definitions. As Used In This Clause- backhaulmeans Intermediate Links Between The Core Network, Or Backbone Network, And The Small Subnetworks At The Edge Of The Network (e.g., Connecting Cell Phones/towers To The Core Telephone Network). Backhaul Can Be Wireless (e.g., Microwave) Or Wired (e.g., Fiber Optic, Coaxial Cable, Ethernet). covered Foreign Countrymeans The People’s Republic Of China. covered Telecommunications Equipment Or Servicesmeans– (1)telecommunications Equipment Produced By Huawei Technologies Company Or Zte Corporation (or Any Subsidiary Or Affiliate Of Such Entities); (2)for The Purpose Of Public Safety, Security Of Government Facilities, Physical Security Surveillance Of Critical Infrastructure, And Other National Security Purposes, Video Surveillance And Telecommunications Equipment Produced By Hytera Communications Corporation, Hangzhou Hikvision Digital Technology Company, Or Dahua Technology Company (or Any Subsidiary Or Affiliate Of Such Entities); (3)telecommunications Or Video Surveillance Services Provided By Such Entities Or Using Such Equipment; Or (4)telecommunications Or Video Surveillance Equipment Or Services Produced Or Provided By An Entity That The Secretary Of Defense, In Consultation With The Director Of National Intelligence Or The Director Of The Federal Bureau Of Investigation, Reasonably Believes To Be An Entity Owned Or Controlled By, Or Otherwise Connected To, The Government Of Acovered Foreign Country. critical Technologymeans– (1)defense Articles Or Defense Services Included On Theunited Statesmunitions List Set Forth In The International Traffic In Arms Regulations Under Subchapter M Of Chapter I Of Title 22, Code Of Federal Regulations; (2)items Included On The Commerce Control List Set Forth In Supplement No. 1 To Part 774 Of The Export Administration Regulations Under Subchapter C Of Chapter Vii Of Title 15, Code Of Federal Regulations, And Controlled- (i)pursuant To Multilateral Regimes, Including For Reasons Relating To National Security, Chemical And Biological Weapons Proliferation, Nuclear Nonproliferation, Or Missile Technology; Or (ii)for Reasons Relating To Regional Stability Or Surreptitious Listening; (3)specially Designed And Prepared Nuclear Equipment, Parts Andcomponents, Materials, Software, And Technology Covered By Part 810 Of Title 10, Code Of Federal Regulations (relating To Assistance To Foreign Atomic Energy Activities); (4)nuclear Facilities, Equipment, And Material Covered By Part 110 Of Title 10, Code Of Federal Regulations (relating To Export And Import Of Nuclear Equipment And Material); (5)select Agents And Toxins Covered By Part 331 Of Title 7, Code Of Federal Regulations, Part 121 Of Title 9 Of Such Code, Or Part 73 Of Title 42 Of Such Code; Or (6)emerging And Foundational Technologies Controlled Pursuant To Section 1758 Of The Export Control Reform Act Of 2018 (50 U.s.c. 4817). interconnection Arrangementsmeans Arrangements Governing The Physical Connection Of Two Or More Networks To Allow The Use Of Another's Network To Hand Off Traffic Where It Is Ultimately Delivered (e.g., Connection Of A Customer Of Telephone Provider A To A Customer Of Telephone Company B) Or Sharing Data And Other Information Resources. reasonable Inquirymeans An Inquiry Designed To Uncover Any Information In The Entity's Possession About The Identity Of The Producer Or Provider Ofcovered Telecommunications Equipment Or Servicesused By The Entity That Excludes The Need To Include An Internal Or Third-party Audit. roamingmeans Cellular Communications Services (e.g., Voice, Video, Data) Received From A Visited Network When Unable To Connect To The Facilities Of The Home Network Either Because Signal Coverage Is Too Weak Or Because Traffic Is Too High. substantial Or Essential Componentmeans Anycomponentnecessary For The Proper Function Or Performance Of A Piece Of Equipment, System, Or Service. (b)prohibition. (1)section 889(a)(1)(a) Of The John S. Mccainnational Defenseauthorization Act For Fiscal Year 2019 (pub. L. 115-232) Prohibits The Head Of Anexecutive Agencyon Or After August 13, 2019, From Procuring Or Obtaining, Or Extending Or Renewing A Contract To Procure Or Obtain, Any Equipment, System, Or Service That Usescovered Telecommunications Equipment Or Servicesas Asubstantial Or Essential Componentof Any System, Or Ascritical Technologyas Part Of Any System. The Contractor Is Prohibited From Providing To The Government Any Equipment, System, Or Service That Usescovered Telecommunications Equipment Or Servicesas Asubstantial Or Essential Componentof Any System, Or Ascritical Technologyas Part Of Any System, Unless An Exception At Paragraph (c) Of This Clause Applies Or The Covered Telecommunication Equipment Or Services Are Covered By A Waiver Described In Far4.2104. (2)section 889(a)(1)(b) Of The John S. Mccainnational Defenseauthorization Act For Fiscal Year 2019 (pub. L. 115-232) Prohibits The Head Of Anexecutive Agencyon Or After August 13, 2020, From Entering Into A Contract, Or Extending Or Renewing A Contract, With An Entity That Uses Any Equipment, System, Or Service That Usescovered Telecommunications Equipment Or Servicesas Asubstantial Or Essential Componentof Any System, Or Ascritical Technologyas Part Of Any System, Unless An Exception At Paragraph (c) Of This Clause Applies Or The Covered Telecommunication Equipment Or Services Are Covered By A Waiver Described In Far4.2104. This Prohibition Applies To The Use Ofcovered Telecommunications Equipment Or Services, Regardless Of Whether That Use Is In Performance Of Work Under A Federal Contract. (c)exceptions.this Clause Does Not Prohibit Contractors From Providing— (1)a Service That Connects To The Facilities Of A Third-party, Such As Backhaul, Roaming, Or Interconnection Arrangements; Or (2)telecommunications Equipment That Cannot Route Or Redirect User Data Traffic Or Permit Visibility Into Any User Data Or Packets That Such Equipment Transmits Or Otherwise Handles. (d)reporting Requirement. (1)in The Event The Contractor Identifiescovered Telecommunications Equipment Or Servicesused As Asubstantial Or Essential Componentof Any System, Or Ascritical Technologyas Part Of Any System, During Contract Performance, Or The Contractor Is Notified Of Such By A Subcontractor At Any Tier Or By Any Other Source, The Contractorshallreport The Information In Paragraph (d)(2) Of This Clause To Thecontracting Officer, Unless Elsewhere In This Contract Are Established Procedures For Reporting The Information; In The Case Of The Department Of Defense, The Contractorshallreport To The Website Athttps://dibnet.dod.mil. For Indefinite Delivery Contracts, The Contractorshallreport To Thecontracting Officerfor The Indefinite Delivery Contract And Thecontracting Officer(s) For Any Affected Order Or, In The Case Of The Department Of Defense, Identify Both The Indefinite Delivery Contract And Any Affected Orders In The Report Provided Athttps://dibnet.dod.mil. (2)the Contractorshallreport The Following Information Pursuant To Paragraph (d)(1) Of This Clause (i)within One Businessdayfrom The Date Of Such Identification Or Notification: The Contract Number; The Order Number(s), If Applicable; Supplier Name; Supplierunique Entity Identifier(if Known); Suppliercommercial And Government Entity (cage) Code(if Known); Brand; Model Number (original Equipment Manufacturer Number, Manufacturer Part Number, Or Wholesaler Number); Item Description; And Any Readily Available Information About Mitigation Actions Undertaken Or Recommended. (ii)within 10 Business Days Of Submitting The Information In Paragraph (d)(2)(i) Of This Clause: Any Further Available Information About Mitigation Actions Undertaken Or Recommended. In Addition, The Contractorshalldescribe The Efforts It Undertook To Prevent Use Or Submission Ofcovered Telecommunications Equipment Or Services, And Any Additional Efforts That Will Be Incorporated To Prevent Future Use Or Submission Ofcovered Telecommunications Equipment Or Services. (e)subcontracts.the Contractorshallinsert The Substance Of This Clause, Including This Paragraph (e) And Excluding Paragraph (b)(2), In All Subcontracts And Other Contractual Instruments, Including Subcontracts For Theacquisitionofcommercial Productsorcommercial Services. (vi)52.204-27, Prohibition On A Bytedance Covered Application(jun 2023)(section 102 Of Division R Of Pub. L. 117-328). (vii)(a)52.204–30, Federalacquisitionsupply Chain Security Act Orders—prohibition.(dec 2023)(pub. L. 115–390, Title Ii). (b)alternatei(dec 2023)of 52.204–30. (viii)52.219-8, Utilization Of Small Business Concerns(feb 2024)(15u.s.c.637(d)(2)and (3)), In All Subcontracts Thatofferfurther Subcontracting Opportunities. If The Subcontract (except Subcontracts To Small Business Concerns) Exceeds The Applicable Threshold Specified In Far19.702(a) On The Date Of Subcontract Award, The Subcontractormustinclude52.219-8in Lower Tier Subcontracts Thatoffersubcontracting Opportunities. (ix)52.222-21, Prohibition Of Segregated Facilities(apr 2015). (x)52.222-26, Equal Opportunity(sep 2015)(e.o.11246). (xi)52.222-35, Equal Opportunity For Veterans(jun 2020)(38u.s.c.4212). (xii)52.222-36, Equal Opportunity For Workers With Disabilities(jun 2020)(29u.s.c.793). (xiii)52.222-37, Employment Reports On Veterans(jun 2020)(38u.s.c.4212). (xiv)52.222-40, Notification Of Employee Rights Under The National Labor Relations Act(dec 2010)(e.o. 13496). Flow Down Required In Accordance With Paragraph (f) Of Far Clause52.222-40. (xv)52.222-41, Service Contract Labor Standards(aug 2018)(41u.s.c.chapter67). (xvi) (a)52.222-50, Combating Trafficking In Persons(nov 2021)(22u.s.c.chapter78and E.o 13627). (b)alternatei(mar 2015)of52.222-50(22u.s.c.chapter78ande.o.13627). (xvii)52.222-51, Exemption From Application Of The Service Contract Labor Standards To Contracts For Maintenance, Calibration, Or Repair Of Certain Equipment-requirements (may2014) (41u.s.c.chapter67). (xviii)52.222-53, Exemption From Application Of The Service Contract Labor Standards To Contracts For Certain Services-requirements(may2014)(41u.s.c.chapter67). (xix)52.222-54, Employment Eligibility Verification(may2022)(e.o. 12989). (xx)52.222-55, Minimum Wages For Contractor Workers Under Executive Order 14026(jan 2022). (xxi)52.222-62, Paid Sick Leave Under Executive Order 13706(jan 2022)(e.o. 13706). (xxii) (a)52.224-3, Privacy Training (jan 2017) (5u.s.c.552a). (b)alternatei(jan 2017)of52.224-3. (xxiii)52.225-26, Contractors Performing Private Security Functions Outside Theunited States(oct 2016)(section 862, As Amended, Of Thenational Defenseauthorization Act For Fiscal Year 2008; 10 U.s.c. Subtitle A, Part V, Subpart G Note). (xxiv)52.226-6, Promoting Excess Food Donation To Nonprofit Organizations(jun 2020)(42u.s.c.1792). Flow Down Required In Accordance With Paragraph (e) Of Far Clause52.226-6. (xxv)52.232-40, Providing Accelerated Payments Tosmall Business Subcontractors(mar 2023) (31 U.s.c. 3903and10 U.s.c. 3801). Flow Down Required In Accordance With Paragraph (c) Of52.232-40. (xxvi)52.247-64, Preference For Privately Owned U.s.-flag Commercial Vessels(nov 2021)(46 U.s.c. 55305and10u.s.c.2631). Flow Down Required In Accordance With Paragraph (d) Of Far Clause52.247-64. (2)while Not Required, The Contractormayinclude In Its Subcontracts Forcommercial Productsandcommercial Servicesa Minimal Number Of Additional Clauses Necessary To Satisfy Its Contractual Obligations. 14. Electronic Submission Of Payment Requests (a) Definitions. As Used In These Instructions - (1) “payment Request” Means A Bill, Voucher, Invoice, Or Request For Contract Financing Payment With Associated Supporting Documentation. The Payment Request Must: Comply With The Requirements Identified In Far 32.905(b), “content Of Invoices” And The Applicable Payment Clause Included In This Contract. In Addition, Discount Offerings And Small Business Status If Available Shall Be Stated. If Travel Was Allowable And Approved, Components In Accordance With Far 31.205-46 Shall Be Provided. (b) The Contractor Shall Submit Payment Requests Electronically Using The Invoice Processing Platform (ipp). The Contractor Will Submit Payment Requests Using The Blank Form In Ipp. (c) Information Regarding Ipp, Including Ipp Customer Support Contact Information, Is Available At Www.ipp.gov Or Any Successor Site. (d) Ipp Enrollment Information Is At Https://www.uscg.mil/fincen/ipp/. additional Clauses hsar 3052.212-70contract Terms And Conditions Applicable To Dhs Acquisition Of Commercial Items. as Prescribed In (hsar) 48 Cfr 3012.301, Insert The Following Clause: contract Terms And Conditions Applicable To Dhs Acquisition Of Commercial Items (sep 2012) the Contractor Agrees To Comply With Any Provision Or Clause That Is Incorporated Herein By Reference To Implement Agency Policy Applicable To Acquisition Of Commercial Items Or Components. The Provision Or Clause In Effect Based On The Applicable Regulation Cited On The Date The Solicitation Is Issued Applies Unless Otherwise Stated Herein. The Following Provisions And Clauses Are Incorporated By Reference: [the Contracting Officer Should Either Check The Provisions And Clauses That Apply Or Delete The Provisions And Clauses That Do Not Apply From The List. The Contracting Officer May Add The Date Of The Provision Or Clause If Desired For Clarity.] (a)provisions. x 3052.247-72 F.o.b. Destination Only. (end Of Clause) 15. Defense Priorities And Allocations System (dpas) Ratings Are Not Applicable. 16. Quotes Are Due Not Later Than 22 Jan 2025, By 10:00 Am Eastern Daylight Savings Time (dst). 17. All Questions Regarding This Notice Shall Be Submitted In Writing To Donna Scandaliato No Later Than Jan 22, 2024. Quote Shall Be Emailed To Donna.m.scandaliato@uscg.mil.

Details: The United States Coast Guard Surface Forces Logistics Center Has A Requirement To Open, Inspect, Report And Possible Overhaul Of The Below Item And Is Requesting Quotations: 1. This Is A Combined Synopsis/solicitation For Commercial Items Prepared In Accordance With The Format Outlined In Far Subpart 12.6, And As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Quotes Are Being Requested And A Written Solicitation Will Not Be Issued. 2. Solicitation Number 70z04025qag129 Is Issued As A Request For Quotation (rfq). This Solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular (fac) 2025-02, Dated January 3, 2025. It Is Anticipated That A Competitive Price Purchase Order Shall Be Awarded Because Of This Synopsis/solicitation. All Responsible Sources May Submit A Quotation Which If Timely Received, Shall Be Considered By This Agency. 3. This Acquisition Will Be Issued Under Naics 811210. 4. Nsn: 2925-01-603-2033 oem: Electronic Control Arc 3000 M pn: Qcarc3002-aa03 qty: 4 Ea open, Inspect, Report With Possible Repair In Accordance With The Overhaul Description And Oem Specs. inspection Cost $__________ Each (this Cost Will Be Paid If Items Are Beyond Economic Repair) firm Fixed Repair Price $___________ Each. 5. These Parts Are Used For The U. S. Coast Guard Patrol Boat Product Line. Substitute Parts Or Part Numbers Are Not Acceptable. The Uscg Does Not Own The Rights To The Proprietary Data And Therefore Cannot Provide Drawings, Specifications, Or Schematics For These Parts. It Is The Government’s Belief That Only Quantum Marine Engineering, Inc. And Or Their Authorized Repair Facility Can Obtain The Required Technical And Engineering Data, And Genuine Oem Parts, Required To Successfully Repair These Items. Concerns Having The Expertise And Required Capabilities To Repair These Items Are Invited To Submit Complete Information Discussing The Same With Three (3) Calendar Days From The Day This Notice Is Posted. The Information Submitted Must Include A Letter From The Oem Verifying The Offeror Is An Authorized Repair Facility And Verifying The Oem Will Supply Only Genuine Oem Parts. 6. Packing And Marking: each Unit Shall Be Individually Preserved And Wrapped For Protection Against Deterioration For A Period Of 2 Years Minimum. Each Unit Shall Be Packed Individually In It’s Own Wooden Box Which Shall Be Capable Of Providing Adequate Protection To The Item During Multiple Shipments. Mare Each Box In Legible Black Print Lettering With The Following Information. national Stock Number 2925-01-603-2033 item Name Electronic Control Arc 3000 M part Number Qcarc3002-aa03 gov’t Order Number 70z08025p29****** coast Guard Sflc Material, Condition Code “a” 7. Delivery: delivery Is Required 02 Dec 2025. Please Provide Your Proposed Delivery To Address Below. Deliveries Are To Be Made Monday Through Friday Between The Hours Of 7:00 Am To 1:00 Pm. delivery Shall Be F.o.b. Destination To: united States Coast Guard (sflc) receiving Room, Bldg. #88 2401 Hawkins Point Road baltimore, Md 21226. estimated Delivery Date: _________________ 8. Inspection And Acceptance: F.o.b. Destination inspection And Acceptance Shall Take Place After Verification Of Preservation, Individual Packaging And Marking Requirements And Confirmation Of No Damage During Transit. Failure To Comply With Packaging Requirements Will Result In Rejection And Nonpayment. the Provision At 52.212-1, Instructions To Offerors-commercial, Applies To This Acquisition. In Addition, The Following Language Applies To This Provision: 9. Multiple Awards Will Not Be Made. Vendor Shall Provide An All-or-nothing Quote For The Requirement Identified In (5) Above. 10. Award Will Be Made To The Lowest Price Offeror, That Is Deemed Technical Acceptable. the Contractor Shall Provide A Total Firm Fixed Price With Inspection Fee For All Necessary Equipment And Shipping Cost To Addresses Shown Under Delivery. vendor Must Be Registered At Https://www.sam.gov Prior To Quote Submittal. each Offeror’s Record In Fapiis Will Be Reviewed Prior To Award. Award Will Not Be Made To Any Offeror Who Has Any Adverse Financial Information Or Exclusions. 11. Offerors Shall Include A Completed Copy Of The Provision At 52.212-3, Offeror Representations And Certifications-commercial Products And Commercial Services (may 2024), With Their Offer, If This Information Is Not Already Included In Https://www.sam.gov. 12. The Clause At 52.212-4, Contract Terms And Conditions-commercial Items (nov 2023), Applies To This Acquisition. 13. Far 52.212-5 Contract Terms And Conditions Required To Implement Statues Or Executive Orders-commercial Product And Commercial Services (jan 2025) (a)the Contractorshallcomply With The Following Federalacquisitionregulation (far) Clauses, Which Are Incorporated In This Contract By Reference, To Implement Provisions Of Law Or Executive Orders Applicable Toacquisitionsofcommercial Productsandcommercial Services: (1)52.203-19, Prohibition On Requiring Certain Internal Confidentiality Agreements Or Statements(jan 2017)(section 743 Of Division E, Title Vii, Of The Consolidated And Further Continuing Appropriations Act, 2015 (pub. L. 113-235) And Its Successor Provisions In Subsequent Appropriations Acts (and As Extended In Continuing Resolutions)). (2)52.204-23, Prohibition Oncontractingfor Hardware, Software, And Services Developed Or Provided By Kaspersky Lab Covered Entities(dec 2023)(section 1634 Of Pub. L. 115-91). (3)52.204-25, Prohibition Oncontractingfor Certain Telecommunications And Video Surveillance Services Or Equipment.(nov 2021)(section 889(a)(1)(a) Of Pub. L. 115-232). (4)52.209-10, Prohibition Oncontractingwith Inverted Domestic Corporations(nov 2015). (5)52.232-40, Providing Accelerated Payments Tosmall Business Subcontractors(mar 2023)(31 U.s.c. 3903and10 U.s.c. 3801). (6)52.233-3, Protest After Award(aug 1996)(31u.s.c.3553). (7)52.233-4, Applicable Law For Breach Of Contractclaim(oct 2004)(public Laws 108-77 And 108-78 (19u.s.c.3805note)). (b)the Contractorshallcomply With The Far Clauses In This Paragraph (b) That Thecontracting Officerhas Indicated As Being Incorporated In This Contract By Reference To Implement Provisions Of Law Or Executive Orders Applicable Toacquisitionsofcommercial Productsandcommercial Services: [contracting Officercheck As Appropriate.] x(1)52.203-6, Restrictions On Subcontractor Sales To The Government(jun 2020),withalternatei(nov 2021)(41u.s.c.4704and10 U.s.c. 4655). __(2)52.203-13, Contractor Code Of Business Ethics And Conduct(nov 2021)(41u.s.c.3509)). __(3)52.203-15, Whistleblower Protections Under The American Recovery And Reinvestment Act Of 2009(jun 2010)(section 1553 Of Pub. L. 111-5). (applies To Contracts Funded By The American Recovery And Reinvestment Act Of 2009.) __(4)52.203-17, Contractor Employee Whistleblower Rights(nov 2023)(41 U.s.c. 4712); This Clause Does Not Apply To Contracts Of Dod, Nasa, The Coast Guard, Or Applicable Elements Of The Intelligence Community—see Far3.900(a). __(5)52.204-10, Reporting Executive Compensation And First-tier Subcontract Awards(jun 2020)(pub. L. 109-282) (31u.s.c.6101note). __(6)[reserved]. __(7)52.204-14, Service Contract Reporting Requirements(oct 2016)(pub. L. 111-117, Section 743 Of Div. C). __(8)52.204-15, Service Contract Reporting Requirements For Indefinite-delivery Contracts(oct 2016)(pub. L. 111-117, Section 743 Of Div. C). __(9)52.204-27, Prohibition On A Bytedance Covered Application(jun 2023)(section 102 Of Division R Of Pub. L. 117-328). __(10)52.204-28, Federalacquisitionsupply Chain Security Act Orders—federal Supply Schedules, Governmentwideacquisitioncontracts, And Multi-agency Contracts.(dec 2023)(pub. L. 115–390, Title Ii). __(11)(i)52.204-30, Federalacquisitionsupply Chain Security Act Orders—prohibition.(dec 2023)(pub. L. 115–390, Title Ii). __(ii)alternatei(dec 2023)of 52.204–30. x(12)52.209-6, Protecting The Government’s Interest When Subcontracting With Contractors Debarred, Suspended, Or Proposed Fordebarment.(nov 2021)(31u.s.c.6101note). __(13)52.209-9, Updates Of Publicly Available Information Regarding Responsibility Matters(oct 2018)(41u.s.c.2313). __(14)[reserved]. __(15)52.219-3, Notice Ofhubzoneset-aside Or Sole-source Award (oct 2022) (15u.s.c.657a). __(16)52.219-4, Notice Of Price Evaluation Preference Forhubzonesmall Business Concerns (oct 2022) (if Theofferorelects To Waive The Preference, Itshallso Indicate In Itsoffer) (15u.s.c.657a). __(17)[reserved] __(18)(i)52.219-6, Notice Of Total Small Business Set-aside(nov 2020)(15u.s.c.644). __(ii)alternatei(mar 2020)of52.219-6. __(19)(i)52.219-7, Notice Of Partial Small Business Set-aside(nov 2020)(15u.s.c.644). __(ii)alternatei(mar 2020)of52.219-7. __(20)52.219-8, Utilization Of Small Business Concerns (feb 2024) (15u.s.c.637(d)(2)and (3)). __(21)(i)52.219-9, Small Business Subcontracting Plan (sep 2023) (15u.s.c.637(d)(4)). __(ii)alternatei(nov 2016)of52.219-9. __(iii)alternateii(nov 2016)of52.219-9. __(iv)alternateiii(jun 2020)of52.219-9. __(v)alternateiv (sep 2023) Of52.219-9. __(22)(i)52.219-13, Notice Of Set-aside Of Orders(mar 2020)(15u.s.c.644(r)). __(ii)alternatei(mar 2020)of52.219-13. __(23)52.219-14, Limitations On Subcontracting (oct 2022) (15u.s.c.637s). __(24)52.219-16, Liquidated Damages—subcontracting Plan(sep 2021)(15u.s.c.637(d)(4)(f)(i)). __(25)52.219-27, Notice Of Set-aside For, Or Sole-source Award To, Service-disabled Veteran-owned Small Business (sdvosb) Concerns Eligible Under The Sdvosb Program (feb 2024) (15u.s.c.657f). __(26)(i)52.219-28, Post Award Small Business Program Rerepresentation (feb 2024) (15u.s.c.632(a)(2)). __(ii)alternatei(mar 2020)of52.219-28. __(27)52.219-29, Notice Of Set-aside For, Or Sole-source Award To, Economically Disadvantagedwomen-owned Small Business Concerns(oct 2022) (15u.s.c.637(m)). __(28)52.219-30, Notice Of Set-aside For, Or Sole-source Award To, Women-owned Small Business Concerns Eligible Under The Women-owned Small Business Program (oct 2022) (15u.s.c.637(m)). __(29)52.219-32, Orders Issued Directly Under Small Business Reserves(mar 2020)(15u.s.c.644(r)). __(30)52.219-33, Nonmanufacturer Rule(sep 2021)(15u.s.c. 637(a)(17)). x(31)52.222-3, Convict Labor(jun 2003)(e.o.11755). x(32)52.222-19, Child Labor-cooperation With Authorities And Remedies(feb 2024). x (33)52.222-21, Prohibition Of Segregated Facilities(apr 2015). x(34)(i)52.222-26, Equal Opportunity(sep 2016)(e.o.11246). __(ii)alternatei(feb 1999)of52.222-26. __(35)(i)52.222-35, Equal Opportunity For Veterans(jun 2020)(38u.s.c.4212). __(ii)alternatei(jul 2014)of52.222-35. x(36)(i)52.222-36, Equal Opportunity For Workers With Disabilities(jun 2020)(29u.s.c.793). __(ii)alternatei(jul 2014)of52.222-36. __(37)52.222-37, Employment Reports On Veterans (jun 2020) (38u.s.c.4212). __(38)52.222-40, Notification Of Employee Rights Under The National Labor Relations Act(dec 2010)(e.o. 13496). __(39)(i)52.222-50, Combating Trafficking In Persons(nov 2021)(22u.s.c.chapter78and E.o. 13627). __(ii)alternatei(mar 2015)of52.222-50(22u.s.c.chapter78and E.o. 13627). x(40)52.222-54, Employment Eligibility Verification(may2022)(executive Order 12989). (not Applicable To Theacquisitionof Commercially Available Off-the-shelf Items Or Certain Other Types Ofcommercial Productsorcommercial Servicesas Prescribed In Far22.1803.) __(41)(i)52.223-9, Estimate Of Percentage Ofrecovered Materialcontent For Epa–designated Items (may2008) (42u.s.c.6962(c)(3)(a)(ii)). (not Applicable To Theacquisitionof Commercially Available Off-the-shelf Items.) __(ii)alternatei(may2008)of52.223-9(42u.s.c.6962(i)(2)(c)). (not Applicable To Theacquisitionof Commercially Available Off-the-shelf Items.) __(42)52.223-11,ozone-depleting Substancesandhigh Global Warming Potential Hydrofluorocarbons(may 2024) (e.o. 13693). __(43)52.223-12, Maintenance, Service, Repair, Or Disposal Of Refrigeration Equipment And Air Conditioners(may 2024)(e.o. 13693). __(49)52.223-20, Aerosols(may 2024)(e.o. 13693). __(50)52.223-21, Foams (may 2024) (e.o. 13693). __(51)(i)52.224-3privacy Training(may 2024)(5 U.s.c. 552 A). __(ii)alternatei(jan 2017)of52.224-3. __(52)(i)52.225-1, Buy American-supplies(oct 2022)(41u.s.c.chapter83). __(ii)alternatei(oct 2022)of52.225-1. x(53)(i)52.225-3, Buy American-free Trade Agreements-israeli Trade Act(nov 2023)(19 U.s.c. 3301 Note,19 U.s.c. 2112 Note,19 U.s.c. 3805 Note,19 U.s.c. 4001 Note, 19 U.s.c. Chapter 29 (sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, And 112-43. __(ii)alternatei [reserved]. __(iii)alternateii(jan 2025)of52.225-3. __(iv)alternateiii(nov 2023)of52.225-3. __(v)alternateiv (oct 2022) Of52.225-3. __(54)52.225-5, Trade Agreements(nov 2023)(19u.s.c.2501,et Seq.,19u.s.c.3301note). x(55)52.225-13, Restrictions On Certain Foreign Purchases(feb 2021)(e.o.’s, Proclamations, And Statutes Administered By The Office Of Foreign Assets Control Of The Department Of The Treasury). __(56)52.225-26, Contractors Performing Private Security Functions Outside Theunited States(oct 2016) (section 862, As Amended, Of Thenational Defenseauthorization Act For Fiscal Year 2008; 10 U.s.c. Subtitle A, Part V, Subpart G Note). __(57)52.226-4, Notice Of Disaster Oremergencyarea Set-aside (nov 2007) (42u.s.c.5150). __(58)52.226-5, Restrictions On Subcontracting Outside Disaster Oremergencyarea (nov2007) (42u.s.c.5150). __(59)52.229-12, Tax On Certain Foreignprocurements(feb 2021). __(60)52.232-29, Terms For Financing Of Purchases Ofcommercial Productsandcommercial Services(nov 2021)(41u.s.c.4505,10 U.s.c. 3805). __(61)52.232-30, Installment Payments Forcommercial Productsandcommercial Services(nov 2021)(41u.s.c.4505,10 U.s.c. 3805). x(62)52.232-33, Payment Byelectronic Funds Transfer-system For Award Management(oct2018)(31u.s.c.3332). __(63)52.232-34, Payment Byelectronic Funds Transfer-other Thansystem For Award Management(jul 2013) (31u.s.c.3332). __(64)52.232-36, Payment By Third Party(may2014)(31u.s.c.3332). __(65)52.239-1, Privacy Or Security Safeguards(aug 1996)(5u.s.c.552a). __(66)52.242-5, Payments Tosmall Business Subcontractors(jan 2017)(15u.s.c.637(d)(13)). __(67)(i)52.247-64, Preference For Privately Owned U.s.-flag Commercial Vessels(nov 2021)(46 U.s.c. 55305and10u.s.c.2631). __(ii)alternatei(apr 2003)of52.247-64. __(iii)alternateii(nov 2021)of52.247-64. (c)the Contractorshallcomply With The Far Clauses In This Paragraph (c), Applicable Tocommercial Services, That Thecontracting Officerhas Indicated As Being Incorporated In This Contract By Reference To Implement Provisions Of Law Or Executive Orders Applicable Toacquisitionsofcommercial Productsandcommercial Services: [contracting Officercheck As Appropriate.] x(1)52.222-41, Service Contract Labor Standards(aug 2018)(41u.s.c.chapter67). x(2)52.222-42, Statement Of Equivalent Rates For Federal Hires(may2014)(29u.s.c.206and41u.s.c.chapter67). __(3)52.222-43, Fair Labor Standards Act And Service Contract Labor Standards-price Adjustment (multiple Year Andoptioncontracts)(aug 2018)(29u.s.c.206and41u.s.c.chapter67). __(4)52.222-44, Fair Labor Standards Act And Service Contract Labor Standards-price Adjustment (may2014) (29u.s.c.206and41u.s.c.chapter67). __(5)52.222-51, Exemption From Application Of The Service Contract Labor Standards To Contracts For Maintenance, Calibration, Or Repair Of Certain Equipment-requirements (may2014) (41u.s.c.chapter67). __(6)52.222-53, Exemption From Application Of The Service Contract Labor Standards To Contracts For Certain Services-requirements(may2014)(41u.s.c.chapter67). __(7)52.222-55, Minimum Wages For Contractor Workers Under Executive Order 14026(jan 2022). __(8)52.222-62, Paid Sick Leave Under Executive Order 13706(jan 2022)(e.o. 13706). __(9)52.226-6, Promoting Excess Food Donation To Nonprofit Organizations (jun 2020) (42u.s.c.1792). __(10)52.247-69, Reporting Requirement For U.s.-flag Air Carriers Regarding Training To Prevent Human Trafficking(jan 2025)(49 U.s.c. 40118(g)). (d)comptroller General Examination Of Record. The Contractorshallcomply With The Provisions Of This Paragraph (d) If This Contract Was Awarded Using Other Than Sealed Bid, Is In Excess Of Thesimplified Acquisition Threshold, As Defined In Far2.101, On The Date Of Award Of This Contract, And Does Not Contain The Clause At52.215-2, Audit And Records-negotiation. (1)the Comptroller General Of Theunited States, Or An Authorized Representative Of The Comptroller General,shallhave Access To And Right To Examine Any Of The Contractor’s Directly Pertinent Records Involving Transactions Related To This Contract. (2)the Contractorshallmake Available At Its Offices At All Reasonable Times The Records, Materials, And Other Evidence For Examination, Audit, Or Reproduction, Until 3 Years After Final Payment Under This Contract Or For Any Shorter Period Specified In Far Subpart4.7, Contractor Records Retention, Of The Other Clauses Of This Contract. If This Contract Is Completely Or Partially Terminated, The Records Relating To The Work Terminatedshallbe Made Available For 3 Years After Any Resulting Final Termination Settlement. Records Relating To Appeals Under The Disputes Clause Or To Litigation Or The Settlement Ofclaimsarising Under Or Relating To This Contractshallbe Made Available Until Such Appeals, Litigation, Orclaimsare Finally Resolved. (3)as Used In This Clause, Records Include Books, Documents, Accounting Procedures And Practices, And Other Data, Regardless Of Type And Regardless Of Form. This Does Not Require The Contractor To Create Or Maintain Any Record That The Contractor Does Not Maintain In The Ordinary Course Of Business Or Pursuant To A Provision Of Law. (e)(1)notwithstanding The Requirements Of The Clauses In Paragraphs (a), (b), (c), And (d) Of This Clause, The Contractor Is Not Required To Flow Down Any Far Clause, Other Than Those In This Paragraph (e)(1), In A Subcontract Forcommercial Productsor Commercial Services. Unless Otherwise Indicated Below, The Extent Of The Flow Downshallbe As Required By The Clause- (i)52.203-13, Contractor Code Of Business Ethics And Conduct(nov 2021)(41u.s.c.3509). (ii)52.203-17, Contractor Employee Whistleblower Rights(nov 2023)(41 U.s.c. 4712). (iii)52.203-19, Prohibition On Requiring Certain Internal Confidentiality Agreements Or Statements (jan 2017) (section 743 Of Division E, Title Vii, Of The Consolidated And Further Continuing Appropriations Act, 2015 (pub. L. 113-235) And Its Successor Provisions In Subsequent Appropriations Acts (and As Extended In Continuing Resolutions)). (iv)52.204-23, Prohibition Oncontractingfor Hardware, Software, And Services Developed Or Provided By Kaspersky Lab Covered Entities(dec 2023)(section 1634 Of Pub. L. 115-91). (a)definitions. As Used In This Clause— kaspersky Lab Covered Articlemeans Any Hardware, Software, Or Service That– (1)is Developed Or Provided By Akaspersky Lab Covered Entity; (2)includes Any Hardware, Software, Or Service Developed Or Provided In Whole Or In Part By Akaspersky Lab Covered Entity; Or (3)containscomponentsusing Any Hardware Or Software Developed In Whole Or In Part By Akaspersky Lab Covered Entity. kaspersky Lab Covered Entitymeans– (1)kaspersky Lab; (2)any Successor Entity To Kaspersky Lab, Including Any Change In Name, E.g., “kaspersky”; (3)any Entity That Controls, Is Controlled By, Or Is Under Common Control With Kaspersky Lab; Or (4)any Entity Of Which Kaspersky Lab Has A Majority Ownership. (b)prohibition. Section 1634 Of Division A Of Thenational Defenseauthorization Act For Fiscal Year 2018 (pub. L. 115-91) Prohibits Government Use Of Anykaspersky Lab Covered Article. The Contractor Is Prohibited From— (1)providing Anykaspersky Lab Covered Articlethat The Government Will Use On Or After October 1, 2018; And (2)using Anykaspersky Lab Covered Articleon Or After October 1, 2018, In The Development Of Data Or Deliverables First Produced In The Performance Of The Contract. (c)reporting Requirement. (1)in The Event The Contractoridentifies Akaspersky Lab Covered Articleprovided To The Government During Contract Performance, Or The Contractor Is Notified Of Such By A Subcontractor At Any Tier Or Any Other Source, The Contractorshallreport,in Writing, To Thecontracting Officeror, In The Case Of The Department Of Defense, To The Website Athttps://dibnet.dod.mil. For Indefinite Delivery Contracts, The Contractorshallreport To Thecontracting Officerfor The Indefinite Delivery Contract And Thecontracting Officer(s) For Any Affected Order Or, In The Case Of The Department Of Defense, Identify Both The Indefinite Delivery Contract And Any Affected Orders In The Report Provided Athttps://dibnet.dod.mil. (2)the Contractorshallreport The Following Information Pursuant To Paragraph (c)(1) Of This Clause: (i)within 3 Business Days From The Date Of Such Identification Or Notification: The Contract Number; The Order Number(s), If Applicable; Supplier Name; Brand; Model Number (original Equipment Manufacturer (oem) Number, Manufacturer Part Number, Or Wholesaler Number); Item Description; And Any Readily Available Information About Mitigation Actions Undertaken Or Recommended. (ii)within 10 Business Days Of Submitting The Report Pursuant To Paragraph (c)(1) Of This Clause: Any Further Available Information About Mitigation Actions Undertaken Or Recommended. In Addition, The Contractorshalldescribe The Efforts It Undertook To Prevent Use Or Submission Of Akaspersky Lab Covered Article, Any Reasons That Led To The Use Or Submission Of Thekaspersky Lab Covered Article, And Any Additional Efforts That Will Be Incorporated To Prevent Future Use Or Submission Ofkaspersky Lab Covered Articles. (d)subcontracts. The Contractorshallinsert The Substance Of This Clause, Including This Paragraph (d), In All Subcontracts Including Subcontracts For Theacquisitionofcommercial Productsorcommercial Services. (v)52.204-25, Prohibition Oncontractingfor Certain Telecommunications And Video Surveillance Services Or Equipment (nov 2021)(section 889(a)(1)(a) Of Pub. L. 115-232. definitions. As Used In This Clause- backhaulmeans Intermediate Links Between The Core Network, Or Backbone Network, And The Small Subnetworks At The Edge Of The Network (e.g., Connecting Cell Phones/towers To The Core Telephone Network). Backhaul Can Be Wireless (e.g., Microwave) Or Wired (e.g., Fiber Optic, Coaxial Cable, Ethernet). covered Foreign Countrymeans The People’s Republic Of China. covered Telecommunications Equipment Or Servicesmeans– (1)telecommunications Equipment Produced By Huawei Technologies Company Or Zte Corporation (or Any Subsidiary Or Affiliate Of Such Entities); (2)for The Purpose Of Public Safety, Security Of Government Facilities, Physical Security Surveillance Of Critical Infrastructure, And Other National Security Purposes, Video Surveillance And Telecommunications Equipment Produced By Hytera Communications Corporation, Hangzhou Hikvision Digital Technology Company, Or Dahua Technology Company (or Any Subsidiary Or Affiliate Of Such Entities); (3)telecommunications Or Video Surveillance Services Provided By Such Entities Or Using Such Equipment; Or (4)telecommunications Or Video Surveillance Equipment Or Services Produced Or Provided By An Entity That The Secretary Of Defense, In Consultation With The Director Of National Intelligence Or The Director Of The Federal Bureau Of Investigation, Reasonably Believes To Be An Entity Owned Or Controlled By, Or Otherwise Connected To, The Government Of Acovered Foreign Country. critical Technologymeans– (1)defense Articles Or Defense Services Included On Theunited Statesmunitions List Set Forth In The International Traffic In Arms Regulations Under Subchapter M Of Chapter I Of Title 22, Code Of Federal Regulations; (2)items Included On The Commerce Control List Set Forth In Supplement No. 1 To Part 774 Of The Export Administration Regulations Under Subchapter C Of Chapter Vii Of Title 15, Code Of Federal Regulations, And Controlled- (i)pursuant To Multilateral Regimes, Including For Reasons Relating To National Security, Chemical And Biological Weapons Proliferation, Nuclear Nonproliferation, Or Missile Technology; Or (ii)for Reasons Relating To Regional Stability Or Surreptitious Listening; (3)specially Designed And Prepared Nuclear Equipment, Parts Andcomponents, Materials, Software, And Technology Covered By Part 810 Of Title 10, Code Of Federal Regulations (relating To Assistance To Foreign Atomic Energy Activities); (4)nuclear Facilities, Equipment, And Material Covered By Part 110 Of Title 10, Code Of Federal Regulations (relating To Export And Import Of Nuclear Equipment And Material); (5)select Agents And Toxins Covered By Part 331 Of Title 7, Code Of Federal Regulations, Part 121 Of Title 9 Of Such Code, Or Part 73 Of Title 42 Of Such Code; Or (6)emerging And Foundational Technologies Controlled Pursuant To Section 1758 Of The Export Control Reform Act Of 2018 (50 U.s.c. 4817). interconnection Arrangementsmeans Arrangements Governing The Physical Connection Of Two Or More Networks To Allow The Use Of Another's Network To Hand Off Traffic Where It Is Ultimately Delivered (e.g., Connection Of A Customer Of Telephone Provider A To A Customer Of Telephone Company B) Or Sharing Data And Other Information Resources. reasonable Inquirymeans An Inquiry Designed To Uncover Any Information In The Entity's Possession About The Identity Of The Producer Or Provider Ofcovered Telecommunications Equipment Or Servicesused By The Entity That Excludes The Need To Include An Internal Or Third-party Audit. roamingmeans Cellular Communications Services (e.g., Voice, Video, Data) Received From A Visited Network When Unable To Connect To The Facilities Of The Home Network Either Because Signal Coverage Is Too Weak Or Because Traffic Is Too High. substantial Or Essential Componentmeans Anycomponentnecessary For The Proper Function Or Performance Of A Piece Of Equipment, System, Or Service. (b)prohibition. (1)section 889(a)(1)(a) Of The John S. Mccainnational Defenseauthorization Act For Fiscal Year 2019 (pub. L. 115-232) Prohibits The Head Of Anexecutive Agencyon Or After August 13, 2019, From Procuring Or Obtaining, Or Extending Or Renewing A Contract To Procure Or Obtain, Any Equipment, System, Or Service That Usescovered Telecommunications Equipment Or Servicesas Asubstantial Or Essential Componentof Any System, Or Ascritical Technologyas Part Of Any System. The Contractor Is Prohibited From Providing To The Government Any Equipment, System, Or Service That Usescovered Telecommunications Equipment Or Servicesas Asubstantial Or Essential Componentof Any System, Or Ascritical Technologyas Part Of Any System, Unless An Exception At Paragraph (c) Of This Clause Applies Or The Covered Telecommunication Equipment Or Services Are Covered By A Waiver Described In Far4.2104. (2)section 889(a)(1)(b) Of The John S. Mccainnational Defenseauthorization Act For Fiscal Year 2019 (pub. L. 115-232) Prohibits The Head Of Anexecutive Agencyon Or After August 13, 2020, From Entering Into A Contract, Or Extending Or Renewing A Contract, With An Entity That Uses Any Equipment, System, Or Service That Usescovered Telecommunications Equipment Or Servicesas Asubstantial Or Essential Componentof Any System, Or Ascritical Technologyas Part Of Any System, Unless An Exception At Paragraph (c) Of This Clause Applies Or The Covered Telecommunication Equipment Or Services Are Covered By A Waiver Described In Far4.2104. This Prohibition Applies To The Use Ofcovered Telecommunications Equipment Or Services, Regardless Of Whether That Use Is In Performance Of Work Under A Federal Contract. (c)exceptions.this Clause Does Not Prohibit Contractors From Providing— (1)a Service That Connects To The Facilities Of A Third-party, Such As Backhaul, Roaming, Or Interconnection Arrangements; Or (2)telecommunications Equipment That Cannot Route Or Redirect User Data Traffic Or Permit Visibility Into Any User Data Or Packets That Such Equipment Transmits Or Otherwise Handles. (d)reporting Requirement. (1)in The Event The Contractor Identifiescovered Telecommunications Equipment Or Servicesused As Asubstantial Or Essential Componentof Any System, Or Ascritical Technologyas Part Of Any System, During Contract Performance, Or The Contractor Is Notified Of Such By A Subcontractor At Any Tier Or By Any Other Source, The Contractorshallreport The Information In Paragraph (d)(2) Of This Clause To Thecontracting Officer, Unless Elsewhere In This Contract Are Established Procedures For Reporting The Information; In The Case Of The Department Of Defense, The Contractorshallreport To The Website Athttps://dibnet.dod.mil. For Indefinite Delivery Contracts, The Contractorshallreport To Thecontracting Officerfor The Indefinite Delivery Contract And Thecontracting Officer(s) For Any Affected Order Or, In The Case Of The Department Of Defense, Identify Both The Indefinite Delivery Contract And Any Affected Orders In The Report Provided Athttps://dibnet.dod.mil. (2)the Contractorshallreport The Following Information Pursuant To Paragraph (d)(1) Of This Clause (i)within One Businessdayfrom The Date Of Such Identification Or Notification: The Contract Number; The Order Number(s), If Applicable; Supplier Name; Supplierunique Entity Identifier(if Known); Suppliercommercial And Government Entity (cage) Code(if Known); Brand; Model Number (original Equipment Manufacturer Number, Manufacturer Part Number, Or Wholesaler Number); Item Description; And Any Readily Available Information About Mitigation Actions Undertaken Or Recommended. (ii)within 10 Business Days Of Submitting The Information In Paragraph (d)(2)(i) Of This Clause: Any Further Available Information About Mitigation Actions Undertaken Or Recommended. In Addition, The Contractorshalldescribe The Efforts It Undertook To Prevent Use Or Submission Ofcovered Telecommunications Equipment Or Services, And Any Additional Efforts That Will Be Incorporated To Prevent Future Use Or Submission Ofcovered Telecommunications Equipment Or Services. (e)subcontracts.the Contractorshallinsert The Substance Of This Clause, Including This Paragraph (e) And Excluding Paragraph (b)(2), In All Subcontracts And Other Contractual Instruments, Including Subcontracts For Theacquisitionofcommercial Productsorcommercial Services. (vi)52.204-27, Prohibition On A Bytedance Covered Application(jun 2023)(section 102 Of Division R Of Pub. L. 117-328). (vii)(a)52.204–30, Federalacquisitionsupply Chain Security Act Orders—prohibition.(dec 2023)(pub. L. 115–390, Title Ii). (b)alternatei(dec 2023)of 52.204–30. (viii)52.219-8, Utilization Of Small Business Concerns(feb 2024)(15u.s.c.637(d)(2)and (3)), In All Subcontracts Thatofferfurther Subcontracting Opportunities. If The Subcontract (except Subcontracts To Small Business Concerns) Exceeds The Applicable Threshold Specified In Far19.702(a) On The Date Of Subcontract Award, The Subcontractormustinclude52.219-8in Lower Tier Subcontracts Thatoffersubcontracting Opportunities. (ix)52.222-21, Prohibition Of Segregated Facilities(apr 2015). (x)52.222-26, Equal Opportunity(sep 2015)(e.o.11246). (xi)52.222-35, Equal Opportunity For Veterans(jun 2020)(38u.s.c.4212). (xii)52.222-36, Equal Opportunity For Workers With Disabilities(jun 2020)(29u.s.c.793). (xiii)52.222-37, Employment Reports On Veterans(jun 2020)(38u.s.c.4212). (xiv)52.222-40, Notification Of Employee Rights Under The National Labor Relations Act(dec 2010)(e.o. 13496). Flow Down Required In Accordance With Paragraph (f) Of Far Clause52.222-40. (xv)52.222-41, Service Contract Labor Standards(aug 2018)(41u.s.c.chapter67). (xvi) (a)52.222-50, Combating Trafficking In Persons(nov 2021)(22u.s.c.chapter78and E.o 13627). (b)alternatei(mar 2015)of52.222-50(22u.s.c.chapter78ande.o.13627). (xvii)52.222-51, Exemption From Application Of The Service Contract Labor Standards To Contracts For Maintenance, Calibration, Or Repair Of Certain Equipment-requirements (may2014) (41u.s.c.chapter67). (xviii)52.222-53, Exemption From Application Of The Service Contract Labor Standards To Contracts For Certain Services-requirements(may2014)(41u.s.c.chapter67). (xix)52.222-54, Employment Eligibility Verification(may2022)(e.o. 12989). (xx)52.222-55, Minimum Wages For Contractor Workers Under Executive Order 14026(jan 2022). (xxi)52.222-62, Paid Sick Leave Under Executive Order 13706(jan 2022)(e.o. 13706). (xxii) (a)52.224-3, Privacy Training (jan 2017) (5u.s.c.552a). (b)alternatei(jan 2017)of52.224-3. (xxiii)52.225-26, Contractors Performing Private Security Functions Outside Theunited States(oct 2016)(section 862, As Amended, Of Thenational Defenseauthorization Act For Fiscal Year 2008; 10 U.s.c. Subtitle A, Part V, Subpart G Note). (xxiv)52.226-6, Promoting Excess Food Donation To Nonprofit Organizations(jun 2020)(42u.s.c.1792). Flow Down Required In Accordance With Paragraph (e) Of Far Clause52.226-6. (xxv)52.232-40, Providing Accelerated Payments Tosmall Business Subcontractors(mar 2023) (31 U.s.c. 3903and10 U.s.c. 3801). Flow Down Required In Accordance With Paragraph (c) Of52.232-40. (xxvi)52.247-64, Preference For Privately Owned U.s.-flag Commercial Vessels(nov 2021)(46 U.s.c. 55305and10u.s.c.2631). Flow Down Required In Accordance With Paragraph (d) Of Far Clause52.247-64. (2)while Not Required, The Contractormayinclude In Its Subcontracts Forcommercial Productsandcommercial Servicesa Minimal Number Of Additional Clauses Necessary To Satisfy Its Contractual Obligations. 14. Electronic Submission Of Payment Requests (a) Definitions. As Used In These Instructions - (1) “payment Request” Means A Bill, Voucher, Invoice, Or Request For Contract Financing Payment With Associated Supporting Documentation. The Payment Request Must: Comply With The Requirements Identified In Far 32.905(b), “content Of Invoices” And The Applicable Payment Clause Included In This Contract. In Addition, Discount Offerings And Small Business Status If Available Shall Be Stated. If Travel Was Allowable And Approved, Components In Accordance With Far 31.205-46 Shall Be Provided. (b) The Contractor Shall Submit Payment Requests Electronically Using The Invoice Processing Platform (ipp). The Contractor Will Submit Payment Requests Using The Blank Form In Ipp. (c) Information Regarding Ipp, Including Ipp Customer Support Contact Information, Is Available At Www.ipp.gov Or Any Successor Site. (d) Ipp Enrollment Information Is At Https://www.uscg.mil/fincen/ipp/. additional Clauses hsar 3052.212-70contract Terms And Conditions Applicable To Dhs Acquisition Of Commercial Items. as Prescribed In (hsar) 48 Cfr 3012.301, Insert The Following Clause: contract Terms And Conditions Applicable To Dhs Acquisition Of Commercial Items (sep 2012) the Contractor Agrees To Comply With Any Provision Or Clause That Is Incorporated Herein By Reference To Implement Agency Policy Applicable To Acquisition Of Commercial Items Or Components. The Provision Or Clause In Effect Based On The Applicable Regulation Cited On The Date The Solicitation Is Issued Applies Unless Otherwise Stated Herein. The Following Provisions And Clauses Are Incorporated By Reference: [the Contracting Officer Should Either Check The Provisions And Clauses That Apply Or Delete The Provisions And Clauses That Do Not Apply From The List. The Contracting Officer May Add The Date Of The Provision Or Clause If Desired For Clarity.] (a)provisions. x 3052.247-72 F.o.b. Destination Only. (end Of Clause) 15. Defense Priorities And Allocations System (dpas) Ratings Are Not Applicable. 16. Quotes Are Due Not Later Than 22 Jan 2025, By 10:00 Am Eastern Daylight Savings Time (dst). 17. All Questions Regarding This Notice Shall Be Submitted In Writing To Donna Scandaliato No Later Than Jan 22, 2024. Quote Shall Be Emailed To Donna.m.scandaliato@uscg.mil.

Details: Description Republic Of The Philippines Province Of Sorsogon Municipality Of Irosin Bids & Awards Committee Invitation To Bid For Supply & Delivery Of Various Supplies & Materials For Dole Integrated Livelihood Program And Sustainable Industry Project 1. The Local Government Unit Of Irosin, Through The Trust Fund(dole) Intends To Apply The Sum Of Three Million Four Hundred Twenty Six Thousand One Hundred Thirty Six Pesos (p 3,426,136.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Supply & Delivery Of Various Supplies And Materials For Dole Integrated Livelihood Program And Sustainable Industry Project, Good-01-2025. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Name Of Contract : Supply & Delivery Of Various Supplies & Materials For Dole Integrated Livelihood Program And Sustainable Industry Project Brief Description: 4 Pcs Barber Brush: 23.3cmx7cm, Soft Fiber Material And Wooden Handle/4 Pcs Hair Clipper: Electric, 110v-240v, 50-60hz,all Metal Machine,led Light Display Stainless Steel Blade, Blade Width 45mm,low Noise High Power, 2000 Ma Lithium Battery, 210 Minutes Working Time,4pcs Comb Guide 3/6/10/13mm,body Size: 17x4cm, Body Weight: 371g,with Complete Accessories - Fiber Comb, Cleaning Brush, Lubricant, Charger/4 Pcs Paddle Brush:body Material: Wood, Dimensions: (lxwxh) 25x8x3cm, Brown/8pcs Spray Bottle: 250ml Plastic Hairdressing Spray Bottle/4pcs Hair Blower: 4000w Accurate Power,2-speed Settings (high & Low), 3 Temperature (cold, Hot & Hotter), Glossy, Thick Long Wires, With Light And Perfume Button/4pcs Hair Blower: 4000w Accurate Power,2-speed Settings (high & Low), 3 Temperature (cold, Hot & Hotter), Glossy, Thick Long Wires,with Light And Perfume Button/4pcs Trolley With Blower Holder: 5-layered Wheeled Trolley Cart, Height: 35"/89cm,length: 20.9"/52cm,width: 14"/36cm,4 Drawers, Blower Holder/4pcs Talcum Powder: 200g, Hypo-allergenic, Dermatologist Tested/4 Pcs Cordless Clipper: Body Material: Aluminum,motor: Rotary,power/source Battery: Lithium-ion Battery (90+ Minutes Of Runtime), Blades: Titanium Blades, 3 Guide Combs Plastic Material (#1/2, #1, And #1½),cutting Lengths: 0.4-25mm,inclusions: A Blade Guard, 1 Recharging Transformer (charger), 1 Cleaning Brush, With Lubricating Oil Of At Least 5 Ml And English User Manual,product Dimension: Approximately 6.5-7" (l) X 2-3" (w),weight: Maximum Of 400g, Input: Can Be Used For 110-240 Voltage/4pcs Hair Trimmer: Running Time 120 Minutes Battery Powered, Rechargeable Li-ion Battery 1500 Mah, Dimension: Approximately 6-7" (l) X 1.5-2.5 (w), Material: Stainless,accessories: 4 Plastic Combs In Different Sizes 3mm, 6mm, 9mm, 12mm, Inclusions: 1 Recharging Transformer (charger) And 1 English User Manual, Input: Can Be Used For 110-240 Voltage/4pcs Electric Shaver: With 3d Floating Cutter Head, 40mins. Running Time For 8hrs Fully Charged, Material: Stainless Steel,product Dimension: Approximately 6.5-7" (l) X 2-3" (w),automatic Voltage 100-240v,battery: 2 Cell Nickel-metal Hydride Cylindrical Battery Pack, 4000mah,power Type: Rechargeable/4pcs Hair Shear: Material: Stainless Steel,1 Precision Scissor Approximately 6-7",1 Thinning Scissor Atleast 6",accesories: Scissors Oil Atleast 5ml/4 Pcs Razor Blades: 10pcs/box (double Edge Stainless)/4 Pcs Shaving Razor/labaha: Dimensions: Approximately 5-6" (l) X 3/4-1" (w), Material: Carbon Steel, Color: Black/ 4 Pcs Barber Skin Fade Brush: Handle: Wood, With Soft Bristles 1" (l),dimensions: Atleast 5.5" (l) X 1" (w)/4pcs Comb Set: (4pcs/set), Material: High Quality Plastic, Inclusions: #1-approx. Size: 4.88" (l) X 1.02" (w), #2-approx. Size: 7.09" (l) X 1.46" (w), #3-approx. Size: 7.87" (l) X 1.18" (w), #4-6.10" (l) X 0.20" (w)/4pcs Shaving Gel: (foam), 195g/4pcs Barber's Cape: Color: Black,about 140cm (l) X 110cm (w), Cloth: Polyester/4pcs 360 Degree Swivel Barber Chair: Classic Back Seat With Chrome Steel Base, Premium Steel Frame And High Class Foot Pump, Heavy Duty Leather Cover; Lower Height - At Least 51cm, Top Height - At Least 61cm, Sandles Height - At Least 40cm/8pcs Barber Apron: With Two Pockets, Waterproof, Material: Cotton And Acrylic, Item Size: Approx. 38-38.19" (l) X 27-27.36" (w)/ 4pcs Pomade: 80g, Water-based/26pcs Speed Square: Material: Cast Aluminum, Size: About 18x18x2cm/7.09x7.09x0.79", Weight: About 130g, Triangle-shaped/26pcs Meter Tape With Magnetic Hook: Blade Material, Nylon Coated Blade,dimensions: 16ft (l) X 25mm (w)/26pcs Circular Saw: Voltage: 220-240v, Frequency: 50-60hz, Input Power: 1400w, No-load Speed: Atleast 4800rpm, Blade Diameter: 185mm, Cutting Capacity: 45degree,44mm, 90 Degree: 65mm,maximum Cutting Depth: Atleast 90°62mm, Weight: Maximum Of 5.2kg,item Approximate Dimension: 15-17cm (h), 25-28cm (w), 30-35cm (l)/26pcs Angle Grinder: Rated Input Power: 730w, Wheel Diameter: 4", Rated Voltage: 220v,frequency: 60hz, No Load Speed: 12,000 Rpm, Weight: Approximately 1.6kg, Grinding Spindle Thread: M10, Disc Diameter: 100mm X 1 X 16mm, Dimension: 298mm (l), 77mm (w), 102mm (h )/26pcs Angle Grinder Cutting Disk: 10 Pcs. Per Set, Dimensions: Approx. 105mm (4") X 1.2mm (3/64"') X 16mm (5/8")/26 Pcs Portable Hand Drill: Power Sourced: Battery Powered - 2pc 21 Volt 1500mah Lithium-ion Batteries, Maximum Rotational Speed: 1500 Rpm, Voltage: 210v,amperage: 1.5 Amps, Chuck Size: 0.38",bit Heads Diameters: From 0.8mm-10mm,product Dimensions: ‎9.6" (l) X 2.1" (w) X 7.5" (h), Material: ‎plastic, Rubber, Metal, Item Dimensions: Approx. ‎9.6" (l) X 2.1" (w) X 7.5" (h),item Weight: Atleast ‎2.5 Pounds,item Torque: 330 Inch Pounds; Inclusions: 1x21 Volt Inspiritech Cordless Power Drill, 2x Rechargeable Battery, 1x English User Manual, 10x Self-drilling Drywall Anchors,10x Screwdriver Bits, 2x Double Ended Bits, 3x Drilling Bits, 1x Magnetic Extension Socket Bit Holder, 10x Anchors With Screws,1x One-hour Fast Charger, 1x Flexible Extension Shaft, 1x Carrying Bag/26pcs Wood Planer: Rated Voltage: 220v, Rated Input Power: 600w, Cutting Width: 82mm, Load Speed: 15,000rpm, Frequency: 60hz, Weight: 3kg./26 Pcs Framing Hammer: Handle Material: Alloy Steel, Item Dimensions: Approximately 16-17" (l) X 5.75-6" (w) X 1.5-2" (h), Item Weight: Atleast 1.4 Pounds/26 Pcs Trim Hammer: Handle Material: Wood, Head Material: Alloy Steel; Item Dimensions Approximately: 14-15" (l) X 5-6"(w) X 1-2" (h),item Weight: Atleast 594 Grams/26pcs Roofing Hammer: Item Weight: ‎1.25 Pounds, Product Dimensions: Approx. 13.7" (l) X 6.75" (w) X 1.5" (h)/26 Pcs Chalk Line: Item Weight: 10.6 Ounces, Product Dimensions: ‎approx. 1200" (l) X 4.72" (w) X 5.91" (h) Inches, Color: ‎blue, Material Type: Alloy Steel, Rubber/26 Pcs Utility Knife: Handle Material: Aluminum, Material: Aluminum Alloy, Weight: 120g/pcs, Blade Size: 19mm (w) X 61mm (h) X 0.6mm (t),blade Material: Steel, Thickness: Atleast 0.6mm/26 Pcs Tin Snips: Item Weight: ‎atleast 1 Pound, Package Dimensions: Approx. 12.36" (l) X 3.7" (w) X 1.3" (h),size: ‎long Straight, 12 Inches Long, Blade Length: 3.20",material: Steel, Cutting Thickness Range Up To 1.2mm Carbon Steel And 0.7mm/26 Pcs Framing Square: Shorter Leg Measures At 8 Inch Outside And 6.5 Inch Inside, Longer Leg Measures At 12 Inch Outside And 11 Inch Inside,material: Carbon Steel/26 Pcs Level: Box Beam Style, Material: Aluminum,dimension: Approximately 24-24.5" (l) X 2-2.6" (w) X 1.2-1.5" (h), Weight: Atleast 0.8 Pounds/26 Pcs Electric Planer: Voltage: 220-240v,input Power: 1050w, No Load Speed: 1600rpm, Planing Width And Depth,82x3mm,heavy Duty Aluminum Base/1 Pc Meter Tape With Magnetic Hook: Blade Material: Nylon Coated Blade, Dimensions: 16ft (l) X 25mm (w)/1 Pc Air Compressor Machine: Motor Power: 1hp, Size: Approx. 935x385x800mm,voltage: 220-240v, 60hz, Speed: 3400 Rpm, Tank Capacity: 24l , Operating Pressure: Max 8 Bar, Air Displacement: 93l/min, Pump Lubricated With Oil/1 Pc Blue Painters Tape, Color: Blue, Size: Atleast 1.41" X 20m,thickness: 0.13mm, Item Weight: 1.92 Pounds, Material: Paper/2pcs Electric Spray Gun: Voltage: 220-240v~50/60hz,spraying Pressure: 0.1-0.2 Bar, Max Flow: 850ml/min, Max Viscosity: 50din-s, Container Capacity: Atleast 800ml,power Cord Length: 2m, Rated Power 500w, Spraying Pressure: Atleast 0.1-0.2bar, Item Dimensions: Approximately 13" (l) X 5" (w) X 11" (h)/1 Pc Extension Pole, (3 Stage Extender) Reach: 1.5-to-3ft,weight: Maximum Of 0.5 Pounds, Max. Standing Reach: 10ft, Material : Aluminum/2 Pcs Paint Brush Set, 5 Pcs/set, Material: Synthetic Bristle, Wood Handle, Overall Length: Atleast 11", Bristles Length: Atleast 3", Brush Width: 1", 1-1/2" 2", 2-2.5", 3"and 4"/ 5 Pcs Paint Roller, Material: Plastic,package Dimensions: Approximately 15.16" (l) X 11.22" (w) X 3.15" (h),item Weight: Atleast 1.06 Pounds, Inclusion: Roller, Atleast 7" In Length, Material: Polyester/2 Pcs Painters Gloves, 12 Pcs/pack, Material: Cotton, Color: Red/1 Pc Putty Knife/paint Scraper Set (4pcs), Stainless Steel Blade With Rubberized Handle, Blade Width: 1", 2" And 3", Length Including Handle: Approximately 8-9"/1 Pc Steel Float/plastering Trowel: Thickness: Atleast 0.7 Mm, Surface Measurement, Length: 12", Width: 4", Material: High Carbon Steel With Wood Handle/2 Pcs Lpg Tank With Gas Regulator And Accessories, Capacity: 11kg Cylinder With Gauge And Safety Device, Safety Push Protection For Leakage, Gas Auto Safe Controller, Rubber Gasket, Steel Belted, About 1.8m Hose, With Clamp/2 Pcs Kawali: Aluminum, (diameter X Height) 28cmx8cm With Double Handle/2 Pcs Food Warmer/chafing Dish: Rectangular, 2l Capacity, 6 Pcs In 1 Set Stainless Steel, No Side Handle, Glass Lid Cover With Handle, Dimensions: Same Sizes - 32cm (l) X 26cm (w) X 8cm (h)/2 Pcs Gas Range: Approx. 55-70cm (l) X 50-60cm (w) X 86-93cm (h), 4-gas Burner, 62l Gas Oven, Button Ignition, Top Glass Lid, Net Weight: Maximum Of 28kg, Pan Support: Light Cast Iron Pan Support/2 Pcs Baking Sheet: Aluminum, 12x16 Inches/2 Pcs Digital Kitchen Scale: Accurate Measurement; Weigh Up To 5 Kg / 11 Lb Precisely In 1 G / 0.05 Oz Increments, Quality Material: Measure Food, Small Items, And Liquids With Confidence On The 304 Food-grade, Stainless Steel Platform, Approx. Dimension 7.3-7.5" (l) X 5.7-5.90" (w) X 0.6-08" (h), 2 X 1.5v Aaa Batteries/2 Pcs Measuring Cup (for Liquid Ingredients): 1 Measuring Cup With Red Graphics, Made Of Non-porous Glass That Won't Warp, Stain, Or Absorb Odors, Glass Is Preheated Oven, Microwave, Fridge, Freezer & Dishwasher Safe, Dimension: Approx. 7.13" (l) X 6.75" (w) X 4.38" (h), Measuring Capacity: 500ml/2 Pcs Measuring Cups (for Dry Ingredients): Material: Stainless Steel, 5 Pieces Per Set (1 Cup, 1/2 Cup, 1/3 Cup, 1/4 Cup, 1/8 Cup)/2 Pcs Measuring Spoons (set): 7pcs Stainless Measuring Spoon Kit, The Kit Includes: 1/8 Tsp (0.63ml), 1/4 Tsp (1.25ml), 1/2 Tsp (2.5ml), 3/4 Tsp (3.75ml), 1 Tsp (5ml), 1/2 Tbsp (7.5ml), 1 Tbsp (15ml)/2 Pcs Mixing Bowl: Medium, Approx. Diameter: 28cm, Height:11.2cm, Material: Stainless; Capacity: At Least 4l/2 Pcs Standmixer: 2-in-1 360 Automatic Rotating Bowl Electric Stand & Hand Mixer, 4.5l W/ 5-speed Turbo Function,color: Black/1 Pc Double Burner Gas Stove: Stainless Top And Front, Automatic Ignition ,reversible Trivet, Double Detachable Top Burner, Removable Drip Pan, Dimension: 730mm(l) X 395mm(w) X 105mm(h)/1 Pc Lpg Tank With Gas Regulator And Accessories: Capacity: 11kg Cylinder With Gauge And Safety Device, Safety Push Protection For Leakage, Gas Auto Safe Controller, Rubber Gasket, Steel Belted, About 1.8m Hose, With Clamp/1 Pc Caldero: Aluminum, #2, Diameter Height 28cmx16cm With Double Handle/2 Pcs Kawali: Aluminum, (diameter X Height) 28cmx8cm With Double Handle/1 Pc Kawa: 19.5" Cast Iron With Double Handle Depth/height: 21cm (medium)/1 Pc Food Warmer/chafing Dish: Rectangular, 2l Capacity, 6 Pcs In 1 Set Stainless Steel, No Side Handle, Glass Lid Cover With Handle, Dimensions: Same Sizes - 32cm (l) X 26cm (w) X 8cm (h)1 Pc Food Glass Display (estante): 3 Layers; 20(h)x18(w)x36(l)", Aluminum Base, Glass With Screen Door/1 Pc Casserole With Double Handle: Material: Aluminum, Size: 26cm Dimension: 36(l) X 28.5(w) X 21(h)cm/2 Pcs Frying Tongs: Materials: Stainless Steel With Rubber Or Plastic Coated Handles, 12 Inch Long/1 Pc Chopping Board: Material: Polypropylene/1 Pc Chopping Knife: 10” Stainless,wood Handle/1 Pc Butcher's Knife: Materials: Stainless, Wood Handle, Size: About 10"/1 Pc Plastic Table: 4 Seaters, Square Type With Umbrella Hole At The Center, Table Dimension: 36" (length) X 36" (width) X 30" (height), Thickness: Approximately 1.5in To 2in; Color: Beige2 Pcs Monoblock Chairs: With Backrest, Seat 375mmxdepth 330mm, 2.25 Kg, Class B Plastic, Thickness: Approximately 1.5in, Color: Beige/1 Pc Beach Umbrella: 90" Diameter X 8 Ft. Height, 8 Rib Round Metal Pole, Polyester Multi-coloured Umbrella Canopy/2 Pcs Cooler Container: Chest Insulated Cooler, Materials: Polystyrene, Sizes And Capacities: 30 Liters - 45.5cm(l) X 39cm(w) X 31cm(h),color: Blue Or Red/1 Pc Grill/ Ihawan With Stand,material Of Body And Stand: Stainless , 24x12x33inches (lxwxh), Depth: 5inches/2 Pcs Bicycle With Sidecar: Bicycle Specifications: Bmx Type Bike (frame 1//2 Gi Hd, Rim Set Front X 10 G Wide Jap Hub, Rim Set Rear X 10g Wide Jap Hub, Tire 20 X 2.125 Jumbo, Tube 20 X 2.125, Handle Bar Painted Black, Fork Ex-900 Landing Gear Cp, Head Parts Nikyo/whw, H-post Bmx Ord.m, H-grip Ord. Opc Parts Neco Bearing Type, Opc Plate 36t, Chain Cp Bmx, Freewheel 24t, Pedal Opc Bearing Type, Seat Clamp/s-pin/ S-post P, Saddle With Spring, Footbreak With Spring "full Size" Frame, 175-180mm Cranks Side Car With Umbrella Holder And 2 Chest Coolers Carrier (52l Capacity) - Dimensions: ‎25.8" (l) X 16.2" (w) X 15.7" (h) Materials: 1/2 J1 Pipe 540, 316 X 1 Flat Square Bar, J1 Pipe De Una 520, 1/4 X 2 Flat Bar, 6203 Gi Set, Tire 20 X 2.125 Jumbo/2 Pcs Weighing Scale: 10kg Capacity, Colored Body / Stainless Pan, Graduation: 50g, Powder Coated Body, Pan Size: 255mm Ø X 55mm Deep, Dial Face: 185mm Ø, 4 Units/master Carton/4 Pcs Plastic Fruit Crate 21 X 15 X 12 Inches/1 Pc Hair Dryer, With 3 Temperature Setting (from High To Low): Size: Atleast 200mm (h), 74mm (w), Weight: Minimum Of 315g, Wattage: 2200w, Voltage: 120-240v, Body Material: Plastic/1 Pc 2 In 1 Steam Pro Hair Straightener (straightener & Curler): Tourmaline Ceramic Wide Plates - 1.25" Wide Heating Plate, Adjustable Temperature Display - 150-235◦c, 360◦, Swivel Cord - Tangle-free, Hanger Design, Ptc Heater - Instant Heat-up/1 Pc Hair Combs: Material: Plastic, Inclusions: Flat Comb Size - 21.5cm (l) X 4.2cm (w), Massage Comb Size: 22cm (l) X 8.5cm (w), Ribs Comb Size: 21.5cm (l) X 4cm (w), Curling Comb Size: 20.2cm (l) X 2.5cm (w), Mirror Size: Atleast 22cm (l) X 10cm (w); Storage Base Size: Atleast 10cm (l) X 15cm (w), Package Size: Approx. 22-23cm (l) X 16cm (w) X 11cm (h), Package Weight: Approx. 305g/1 Pc Hair Clips: Plastic, Product Size: Approx. 4.5", Color: Black (12pcs)/1 Pc 7pcs Face Brush Set, Inclusion: Powder Brush, Size: 17cm, Bristle Length: 3.2cm, Ferrule Width:1.9cm, Powder Buffer Brush, Size: 19cm, Bristle Length: 5cm, Ferrule Width: 2.1cm,foundation Brush, Size: 17cm, Bristle Length: 3.3cm, Ferrule Width: 2.2cm, Flat Foundation Brush, Size: 17cm,bristle Length: 3.2cm; Ferrule Width:1.2cm, Highlight Brush, Size: 16.5cm,bristle Length: 2.7cm, Ferrule Width: 2.3cm,angle Cheek Brush, Size: 17cm, Bristle Length: 3.1-2.3cm,ferrule Width: 2.4cm, Highlighting Fan Brush, Size: 16.5cm, Bristle Length: 4cm, Ferrule Width: 2.5cm, With Brush Bag/1 Pc Eyelash Curler: Material: Carbon Steel, Size: Approx. 5.91 X 3.94 X 1.97"/1 Pc Eyebrow Razor: Handle Material: Plastic, Size: Approx. 6.8(l) X 2(w) X 0.1"(h), 6pcs/pack/1 Pc Makeup Sponge Set Blender: Material: Sponge, Size: Approx. 4.02 (l) X 3.94(w) X 2.52"(h), 4pcs/set/1 Pc False Eyelashes, Product Dimensions: ‎ Approx. 0.75(l) X 3.88(w) X 5.38"(h), 5pairs/pack/1 Pc Eye Shadow Pallete: 12 Curated Peach-inspired Shades, Finish Type: Metallic, Matte, Product Dimension: Approx. 0.08 (l) X 0.04 (w) X 0.06" (h)/1 Pc Contour Palette: Multi-colored, Finish Type: Matte, Package Dimension: Approx. 5.75 (l) X 4.25 (w) X 0.5" (h)/1 Pc Hypercurl Waterproof Mascara Make Up Set: Product Dimensions: Approx. ‎0.85 (l) X 2.75 (w) X 5.63" (h), Color: Black/1 Pc Waterproof Matte Gel Eyeliner Pencil: Item Form: Pencil, Powder, Creamy, Finish Type: Matte, Product Dimensions: About‎ 5.77 X 1.97 X 0.81", Color: Black/1 Pc Eyebrow Gel, Waterproof: Weight: About 0.16 Oz, Product Dimension: Approx. 0.75 (l) X 1.9 (w) X 5.65 (h) Inches, Color Black, Brown/1 Pc Blush On, 3 Complimentary Skin-flushed Shades, Product Dimensions: Approx. 2.89 (l) X 0.43 (w) X 2.33" (h)/1 Pc Powder Blush Makeup Palette, Product Dimensions: ‎approx. 2.43 (l) X 2.43 (w) X 0.66" (h)/1 Pc Eye Shadow Palette; 12 Curated Peach-inspired Shades, Finished Type:metallic,matte, Product Dimensions:approx 0.08(l)x0.04(w) X0.06”(h)/ 1 Pc Applicator Brush And Plastic Comb: 13cm Black, Double-sided Comb, Pointed Handle For Sectioning Hair/1 Pc Hair Clipper: Electric; 110v-240v, 50-60hz,all Metal Machine, Led Light Display Stainless Steel Blade, Blade Width 45mm,low Noise High Power, 2000 Ma Lithium Battery, 210 Minutes Working Time, 4pcs Comb Guide 3/6/10/13mm, Body Size: 17x4cm, Body Weight: 371g, With Complete Accessories - Fiber Comb: Cleaning Brush, Lubricant, Charger/1 Pc Spray Bottle: 250ml Plastic Hairdressing Spray Bottle/1 Pc Trolley With Blower Holder: 5-layered Wheeled Trolley Cart, Height: 35"/89cm, Length: 20.9"/52cm, Width: 14"/36cm, 4 Drawers, Blower Holder/1 Pc Curling Iron: 220v Power, 4gen; White, 32x25x13mm, Energy Efficient-48w,360degree Rotating Tail, Automatic Hair Curler, Iron Ceramic, Adjustable Size/1 Pc Apron: Length: 76cm, Width: 59cm, Color: Black, Material: Nylon, Waterproof/1 Pc Curling Rod: Small, 2cm, Cylindrical, Plastic Resin With Rubber Band Kits,multi-color/1 Pc Curling Rod: Medium, 2.5cm, Cylindrical, Plastic Resin With Rubber Band Kits, Multi-color/1 Pc Curling Rod: Large, 3cm, Cylindrical, Plastic Resin With Rubber Band Kits, Multi-color/1 Pc Spray Net: 600ml, 27.5cm, Hard Hold/1 Pc Hair Spray Aerosol Extra Hold: Weight: About 7ounces /198g, Scented, Package Dimensions: ‎7.83 X 6.69 X 2.17"/1 Pc Hair Trimmer: Running Time 120 Minutes Battery Powered,rechargeable Li-ion Battery 1500 Mah, Dimension: Approximately 6-7" (l) X 1.5-2.5 (w), Material: Stainless; Accessories: 4 Plastic Combs In Different Sizes 3mm, 6mm, 9mm, 12mm, Inclusions: 1 Recharging Transformer (charger), And 1 English User Manual, Input: Can Be Used For 110-240 Voltage/3 Pcs Hair Dryer, With 3 Temperature Setting (from High To Low): Size: Atleast 200mm (h), 74mm (w), Weight: Minimum Of 315g, Wattage: 2200w, Voltage: 120-240v,body Material: Plastic/3 Pcs 2 In 1 Steam Pro Hair Straightener (straightener & Curler): Tourmaline Ceramic Wide Plates - 1.25" Wide Heating Plate, Adjustable Temperature Display - 150-235◦c, 360◦, Swivel Cord - Tangle-free; Hanger Design, Ptc Heater - Instant Heat-up/3 Pcs Hair Combs: Material: Plastic, Inclusions: Flat Comb Size - 21.5cm (l) X 4.2cm (w), Massage Comb Size: 22cm (l) X 8.5cm (w), Ribs Comb Size: 21.5cm (l) X 4cm (w),curling Comb Size: 20.2cm (l) X 2.5cm (w), Mirror Size: Atleast 22cm (l) X 10cm (w), Storage Base Size: Atleast 10cm (l) X 15cm (w),package Size: Approx. 22-23cm (l) X 16cm (w) X 11cm (h), Package Weight: Approx. 305g/3 Pcs Hair Clips: Plastic, Product Size: Approx. 4.5",color: Black (12pcs)/3 Pcs Disposable Latex Free Gloves: Non-sterile, 100 Pcs Per Pack, Product Dimensions: Approx.‎ 8.6" (l) X 4.9" (w) X 3" (h), Weight: 1.25 Pounds, Material: Synthetic Pvc/3 Pcs Cutting Scissors: 6" Stainless Steel, 65g/3 Pcs Thinning Scissors: 17.5x5cm Stainless Steel/3 Pcs Drip Pan: 32cmx35cm Plastic, Black/3 Pcs Hair Clipper: Electric,110v-240v, 50-60hz,all Metal Machine,led Light Display Stainless Steel Blade, Blade Width 45mm, Low Noise High Power, 2000 Ma Lithium Battery, 210 Minutes Working Time, 4pcs Comb Guide 3/6/10/13mm, Body Size: 17x4cm, Body Weight: 371g,with Complete Accessories - Fiber Comb, Cleaning Brush, Lubricant, Charger/3 Pcs Nail Tool Set: Material: Stainless Steel, Case: Leather, Package Size: Approximately 15-15.5cm (l) X 8cm (w) X 2cm (h),inclusions: Cuticle Trimmer (95mm), Blackhead Needle And Loop Remover (83mm), Eyebrow Tweezer (86mm) Peeling Knife (90mm), Nail File (75mm), Ear Pick (78mm), Double Pick (75mm), Dead Skin Fork (86mm), Small Pedicure Plier (95mm), Acne Needle (83mm), Small Nail Clipper (62mm) Bevel Nail Clipper (61mm), Large Nail Clipper (82mm), Beauty Tip Scissor (89mm), Pusher/3 Pcs Cotton Balls: 300g (100 Pcs Large Cotton Balls)/3 Pcs Nail Polish: Volume: 15ml, With 24 Colors Inclusions: 14k Gold, 18k Gold, 24k Gold, African Plum, Baby Pink, Black Velvet, Carolina Peach, Cashmere, Emerald Shimmer, Golden Bronze, Italian Nude, Platinum Special, Pussy Red, Red Pearl, Saphire Glow, Silver Platinum, Simply Red, Tahiti Brown, White Satin, White Rose, Platinum Silver, Touch Of Tan, Touch Of Beige, Colorless/3 Pcs Foot Spa Soaker: With Pumice Stone, Package Dimensions: Approximately 16.42" X 13.58" X 7.91", Weight: About 4.63 Pounds, Rated Power: 500 Watts, Rated Voltage: 110~120v, Rated Frequency: 50hz, Temperature Adjustable Range: 35℃ To 48℃/3 Pcs Astringent Foot Soaker: 128oz/3 Pcs Cooling Foot Soak: Product Dimensions: ‎approximately 6.5-7" X 2.38-2.50" X 9.259.50", Weight: Atleast 900g/3 Pcs Exfoliating Foot Scrub: Package Dimensions: Approximately‎ 7.05-7.50" X 2.32-3" X 1.97-2", Weight: Atleast 6oz/3 Pcs Foot File And Callus Remover: Material: Metal, Steel, Item Dimensions: Approx. 10-10.78" X 2.7" X 0.29", Item Weight: 3.2 Pounds/3 Pcs Foot Scrub/3 Pcs Manicurist Bag: Made Of Heavy Duty Nylon, Large Capacity: Enough Room To Hold Up To 42 Bottles Of 15ml Nail Polish, Size: Approx. 8-9" (l) X 6-7" (w) X 4-5" (h)/3 Pcs Spray Bottle: 250ml Plastic Hairdressing Spray Bottle/3 Pcs Trolley With Blower Holder: 5-layered Wheeled Trolley Cart, Height: 35"/89cm, Length: 20.9"/52cm, Width: 14"/36cm, 4 Drawers, Blower Holder/3 Pcs Apron: Length: 76cm, Width: 59cm,color: Black,material: Nylon, Waterproof/3 Pcs Alcohol: 70% Ethyl Alcohol With Moisturizer,500ml/3 Pcs Shampoo: 1000ml, Green Apple And Citrus Lemon Variant/3 Pcs Hair Spa: 1000ml, Lavender And Strawberry Variant/3 Pcs Hot Oil: Keratin Organic Hot Oil, 1000ml, Aloe Vera Variant/3 Pcs Hair Cellophane: 500ml, Natural, Brown,burgundy And Ash Blonde Variant/3 Pcs Hair Rebonding Set: 1000ml Hair Straightening And Hair Neutralizing (ion Perm)/3 Pcs Hair Color Dye:100 Ml, 2pcs Each (black, Dark Brown, Medium Brown, Light Brown, Blonde, Light Blond, Lighter Blonde, Lightest Blonde, Dust)/3 Pcs Hair Color Developer: 100ml 2pcs Each 6%, 9%, 12% Oxidizer/3 Pcs Hair Bleaching Powder: 500g/3 Pcs Brazilian Blowout: 120ml, 3-in-1 Set (clarifying Shampoo, Brazilian Blowout, After Treatment Conditioner)/24 Pcs Hair Dryer, With 3 Temperature Setting (from High To Low): Size: Atleast 200mm (h), 74mm (w), Weight: Minimum Of 315g, Wattage: 2200w, Voltage: 120-240v, Body Material: Plastic/24 Pcs 2 In 1 Steam Pro Hair Straightener (straightener & Curler): Tourmaline Ceramic Wide Plates - 1.25" Wide Heating Plate, Adjustable Temperature Display - 150-235◦c, 360◦,swivel Cord - Tangle-free, Hanger Design, Ptc Heater - Instant Heat-up/24 Pcs Hair Combs: Material: Plastic, Inclusions: Flat Comb Size - 21.5cm (l) X 4.2cm (w), Massage Comb Size: 22cm (l) X 8.5cm (w), Ribs Comb Size: 21.5cm (l) X 4cm (w), Curling Comb Size: 20.2cm (l) X 2.5cm (w), Mirror Size: Atleast 22cm (l) X 10cm (w), Storage Base Size: Atleast 10cm (l) X 15cm (w), Package Size: Approx. 22-23cm (l) X 16cm (w) X 11cm (h), Package Weight: Approx. 305g/24 Pcs Hair Clips: Plastic, Product Size: Approx. 4.5", Color: Black (12pcs)/24 Pcs Disposable Latex Free Gloves: Non-sterile, 100 Pcs Per Pack, Product Dimensions: Approx.‎ 8.6" (l) X 4.9" (w) X 3" (h), Weight: 1.25 Pounds, Material: Synthetic Pvc/24 Pcs Drip Pan: 32cmx35cm Plastic, Black/24 Pcs Shower Caps: 32cm, Thick Plastic, Elastic, Washable/24 Pcs Trolley With Blower Holder: 5-layered Wheeled Trolley Cart, Height: 35"/89cm, Length: 20.9"/52cm, Width: 14"/36cm, 4 Drawers, Blower Holder/24 Pcs Curling Iron: 220v Power, 4gen, White, 32x25x13mm, Energy Efficient-48w, 360degree Rotating Tail, Automatic Hair Curler, Iron Ceramic, Adjustable Size/24 Pcs Hair Steamer: With 4 Wheels, 360degrees Movable, Gray Color, Adjustable Height With Timer And Control/120 Pcs Cape: 140x110cm, Satin, Nylon, Waterproof, Black/72 Pcs Microfiber Towel: 25x65cm, 135g, Microfiber, Dark Colors/24 Pcs Curling Rod:small, 2cm, Cylindrical, Plastic Resin With Rubber Band Kits, Multi-color/24 Pcs Curling Rod: Medium, 2.5cm, Cylindrical, Plastic Resin With Rubber Band Kits, Multi-color/24 Pcs Curling Rod: Large, 3cm, Cylindrical, Plastic Resin With Rubber Band Kits, Multi-color/120 Pcs Ear Caps: (l X W X T): 8cm X 4.5cm X 2.1cm/3.15" X 1.77" X 0.83", Black,plastic/24 Pcs Shampoo: 1000ml, Green Apple And Citrus Lemon Variant/24 Pcs Hair Spa: 1000ml, Lavender And Strawberry Variant/24 Pcs Hot Oil: Keratin Organic Hot Oil, 1000ml, Aloe Vera Variant/24 Pcs Hair Cellophane: 500ml, Natural, Brown, Burgundy And Ash Blonde Variant/24 Pcs Hair Rebonding Set: 1000ml Hair Straightening And Hair Neutralizing (ion Perm)/24 Pc Hair Color Dye:100 Ml, 2pcs Each (black, Dark Brown, Medium Brown, Light Brown, Blonde, Light Blond, Lighter Blonde, Lightest Blonde, Dust)/24 Pcs Hair Color Developer: 100ml 2pcs Each 6%, 9%, 12% Oxidizer/24 Pcs Hair Bleaching Powder: 500g/24 Pcs Brazilian Blowout: 120ml, 3-in-1 Set (clarifying Shampoo, Brazilian Blowout, After Treatment Conditioner)/24 Pcs Hair Shear: Material: Stainless Steel, 1 Precision Scissor Approximately 6-7",1 Thinning Scissor Atleast 6", Accesories: Scissors Oil Atleast 5ml/34 Pcs Angle Grinder Cutting Disk: 10 Pcs. Per Set, Dimensions: Approx. 105mm (4") X 1.2mm (3/64"') X 16mm (5/8")/34 Pcs Crow Bar: At Least 36" Long,length Tolerance: +- 1/8, Material: Forged Steel Carbon/34 Pcs Claw Hammer: Round Head, Head Weight: At Least 16oz, Overall Weight: Approximately 17oz-23oz, Head Material: Forged Steel, Handle Material: Fiberglass Handle With Rubber Cushion, Overall Length: Approximately 12-14"/34 Pcs Hacksaw With Blade: Material: Aluminum Alloy Frame With Soft-grip Handle, At Least 12"-15" Long Including Handle, With Soft-grip Rubber Handle, Bi-metal, Blade Length: About 30cm, Width: 3cm/34 Pcs Meter Tape With Magnetic Hook: Blade Material: Nylon Coated Blade, Dimensions: 16ft (l) X 25mm (w)/34 Pcs Handsaw: Blade Length: About 15",blade Material: Carbon Steel, Handle Length: 5", Handle Material: Plastic/rubber, Color: Gray,8 Teeth Per Inch/34 Pcs Shovel: Round End, Tempered Steel Blade: 17-23 Cm, Blade Tip Width, 22-28cm Blade Tip Length, All Metal Handle, Overall Length: 100cm-115 Cm, Capacity: 350-400 Lbs/34 Pcs Shovel: Rectangular End, Tempered Steel Blade: 22-26 Cm, Blade Tip Width, 22-28cm Blade Tip Length, All Metal Handle, Overall Length: 100cm-115 Cm/34 Pcs Level Bar: Aluminum Frame, Length: At Least 24"/60cm, Aluminum Thickness: 1.5mm, Double Side Milles, 0.5mm/m Accurate Vials/34 Pcs Steel Float/plastering Trowel: Thickness: At Least 0.7 Mm, Surface Measurement, Length: 12", Width: 4", Mmaterial: High Carbon Steel With Wood Handle/34 Pcs Steel Square: Carpenter's Framing Square, Blade Width: 2" Scale: At Least 16" (l) X 24" (w), Material: Steel/34 Pcs Masonry Trowel: Length: At Least 12"long, Width: 6", Material: Flat Steel, With Wood Handle/34 Pcs Circular Saw: Voltage: 220-240v, Frequency: 50-60hz, Input Power: 1400w, No-load Speed: Atleast 4800rpm, Blade Diameter: 185mm, Cutting Capacity: 45degree: 44mm, 90 Degree: 65mm, Maximum Cutting Depth: Atleast 90°62mm, Weight: Maximum Of 5.2kg, Item Approximate Dimension: 15-17cm (h), 25-28cm (w), 30-35cm (l)/34 Pcs Masonry Square/metric Square: Material: Aluminum, Length: Approx. 24", Width: 16", 1/8 '' Thickness/34 Pcs Mason's Level: At Least 48'' Long, Aluminum Reinforced Frame, 60cm Only/34 Pcs Sledgehammer: Weight: At Least 3 Lbs With Fiberglass Handle, Forged Steel Round Head, Length: Approximately 25-27"/34 Pcs Concrete Chisel: Pointed Sharp End, Material: Forged Steel Chisel, With Rubberized Handle, Length: Approximately 10''/34 Pcs Putty Knife/paint Scraper Set (4pcs): Stainless Steel Blade With Rubberized Handle, Blade Width: 1", 2" And 3", Length Including Handle: Approximately 8-9"/34 Pcs Mason's Line: #18 Braided Nylon, 500 Ft/roll, Color Orange/34 Pcs Hammer Drill: Electric, 1980w 220v, Rated Frequency: 50/60hz, Load Speed: 0-3800rpm (revolutions Per Minute), Chuck: 13mm With Ergonomic Anti-slip Handle/34 Pcs Angle Grinder: Rated Input Power: 730w, Wheel Diameter: 4",rated Voltage: 220v, Frequency: 60hz, No Load Speed: 12,000 Rpm, Weight: Approximately 1.6kg, Grinding Spindle Thread: M10, Disc Diameter: 100mm X 1 X 16mm, Dimension: 298mm (l), 77mm (w), 102mm (h )/34 Pcs Wooden Float: Size: At Least 12x4", Has 5/8" Thick Rubber Pad, With Wooden Handle/4 Pcs Nail Tool Set: Material: Stainless Steel, Case: Leather, Package Size: Approximately 15-15.5cm (l) X 8cm (w) X 2cm (h), Inclusions: Cuticle Trimmer (95mm), Blackhead Needle And Loop Remover (83mm), Eyebrow Tweezer (86mm) Peeling Knife (90mm), Nail File (75mm), Ear Pick (78mm), Double Pick (75mm), Dead Skin Fork (86mm), Small Pedicure Plier (95mm), Acne Needle (83mm), Small Nail Clipper (62mm) Bevel Nail Clipper (61mm), Large Nail Clipper (82mm), Beauty Tip Scissor (89mm), Pusher/4 Pcs Cotton Balls: 300g (100 Pcs Large Cotton Balls)/4 Pcs Nail Polish: Volume: 15ml, With 24 Colors Inclusions: 14k Gold, 18k Gold, 24k Gold, African Plum, Baby Pink, Black Velvet, Carolina Peach, Cashmere, Emerald Shimmer, Golden Bronze, Italian Nude, Platinum Special, Pussy Red, Red Pearl, Sapphire Glow, Silver Platinum, Simply Red, Tahiti Brown, White Satin, White Rose, Platinum Silver, Touch Of Tan, Touch Of Beige, Colorless/4 Pcs Foot Spa Soaker: With Pumice Stone, Package Dimensions: Approximately 16.42" X 13.58" X 7.91", Weight: About 4.63 Pounds, Rated Power: 500 Watts, Rated Voltage: 110~120v, Rated Frequency: 50hz, Temperature Adjustable Range: 35℃ To 48℃/2 Pcs Astringent Foot Soaker: 128oz/2 Pcs Cooling Foot Soak: Product Dimensions: ‎approximately 6.5-7" X 2.38-2.50" X 9.259.50", Weight: Atleast 900g/2 Pcs Exfoliating Foot Scrub: Package Dimensions: Approximately‎ 7.05-7.50" X 2.32-3" X 1.97-2", Weight: Atleast 6oz/4 Pcs Foot File And Callus Remover: Material: Metal, Steel, Item Dimensions: Approx. 10-10.78" X 2.7" X 0.29", Item Weight: 3.2 Pounds/2 Pcs Foot Scrub/2 Pcs Manicurist Bag: Made Of Heavy Duty Nylon, Large Capacity: Enough Room To Hold Up To 42 Bottles Of 15ml Nail Polish, Size: Approx. 8-9" (l) X 6-7" (w) X 4-5" (h)/6 Pcs Microfiber Towel: 25x65cm, 135g, Microfiber,dark Colors/2 Pcs Alcohol: 70% Ethyl Alcohol With Moisturizer, 500ml/1 Pc Double Burner Gas Stove: Stainless Top And Front, Automatic Ignition ,reversible Trivet, Double Detachable Top Burner, Removable Drip Pan, Dimension: 730mm(l) X 395mm(w) X 105mm(h)/1 Pc Lpg Tank With Gas Regulator And Accessories: Capacity: 11kg Cylinder With Gauge And Safety Device, Safety Push Protection For Leakage, Gas Auto Safe Controller, Rubber Gasket, Steel Belted, About 1.8m Hose, With Clamp/2 Pcs Kawa: 19.5" Cast Iron With Double Handle Depth/height: 21cm (medium)/1 Pc Plastic Table: 4 Seaters, Square Type With Umbrella Hole At The Center, Table Dimension: 36" (length) X 36" (width) X 30" (height), Thickness: Approximately 1.5in To 2in, Color: Beige/1 Pc Monoblock Chairs: With Backrest, Seat 375mmxdepth 330mm, 2.25 Kg, Class B Plastic, Thickness: Approximately 1.5in, Color: Beige/1 Pc Peanut Grinding Machine: Electric, 220v, 300w, 50-60hz,material: High Quality Stainless Steel Body And Base, Color: Black, Dimension: Approx. Length: 43.5cm, Width: 23cm, Height: 13.5cm/1 Pc Hand Cobbler Shoe Repair Machine Dual Cotton Nylon Line Sewing Machine Manual Leather Machine Shoe Sewing Machine Color Silver: Product Dimensions 14.4"d X 20.5"w X 5.5"h, Material: Cast Iron Item Weight: 22 Pounds, Power Source: Crank/5 Pcs Wooden Handle Shoes Repairing Awl Shoe Sewing Tool Diy Craft Repair Hand Straight Hook Shoes Sewing Awl Type: Shoes Sewing Awl Material: Wood+metal, Features: Shoes Sewing Awl, Repair Hand , Crochet Needle Tool Dimension: 1: App.2x13.5x6cm/0.79x5.31x2.36in 2: App.2x13x5.5cm/0.79x5.12x2.17in 3: App.2x13x5.5cm/0.79x5.12x2.17in, Color: Wood Color + Silver/5 Pcs Upholstery Stitching Thread Black 100 Mtr. 1 Pc Upholstery Hand Stitching Tools For Belts, Saddles, Shoes, Fabric Household Use Handwork Sewing Leather Craft Shoes Repairing/5 Pcs Upholstery Stitching Thread Brown 100 Mtr 1 Pc Upholstery Hand Stitching Tools For Belts, Saddles, Shoes, Fabric Household Use Handwork Sewing Leather Craft Shoes Repairing/5 Pcs Upholstery Stitching Thread White 100 Mtr. 1 Pc Upholstery Hand Stitching Tools For Belts, Saddles, Shoes, Fabric Household Use Handwork Sewing Leather Craft Shoes Repairing/2 Pcs Angle Grinder Cutting Disk: 10 Pcs. Per Set, Dimensions: Approx. 105mm (4") X 1.2mm (3/64"') X 16mm (5/8")/2 Pcs Angle Grinder: Rated Input Power: 730w, Wheel Diameter: 4", Rated Voltage: 220v,frequency: 60hz, No Load Speed: 12,000 Rpm, Weight: Approximately 1.6kg, Grinding Spindle Thread: M10, Disc Diameter: 100mm X 1 X 16mm, Dimension: 298mm (l), 77mm (w), 102mm (h)/2 Pcs Chipping Hammer: Item Weight: ‎at Least 13.8 Ounces, Product Dimensions: ‎11" (l) X 1" (w) X 7.5" (h), Material: Genuine Leather Grip And Forged Steel/2 Pcs Heavy Duty Corded Drill: Rated Input Power: 750w, Chuck Capacity: Up To 13mm, Drill Capacity: Metal (16mm), Wood (25mm), Masonry (12mm), Dimension: 268mm (l) X 69mm (w) X 192mm (h), Weight W/out Cable: Approximately 1.6-1.8 Kg, Spindle Collar Diameter Of 43 Mm/2 Pcs Metal Drill Bit Set: Material: High Speed Steel, 19pcs Per Set(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm,7.5mm,8mm,8.5mm,9mm,9.5mm,10mm), Point Angle: 118degree C, Standards: Din 338, Bit Geometry: Standard Twist Bit/2 Pcs Mig Welding Pliers: Overall Length: Atleast 210mm, Material: High Carbon Steel, Handle Material: Thermoplastic Rubber/2 Pcs Needle File Set: (6 Pieces Hand Metal Files, Hardened Alloy, Strength Steel Set Includes Flat, Flat Warding, Square, Triangular, Round, And Half-round File), Color Black, Metal Type: Carbon Steel, Handle Material: Wood, Alloy Steel, Item Dimensions: Approximately 6.1" (l) X 3" (w) X 0.5" (h)/2 Pcs Portable Welding Machine: Input Voltage: 220-240, Frequency: 50-60hz, Output Current: 10-220a, Led Display, No-load Voltage: 85v, Max. Output Current: 220a, Diameter Of Electrode: 1.6-3.2mm, Inclusions: 1 Pc Electrode Holder, 1 Pc Earth Clamp With Cable/2 Pcs Speed Square: Material: Cast Aluminum, Size: About 18x18x2cm/7.09x7.09x0.79", Weight: About 130g,triangle-shaped/2 Pcs Welding Helmet: Auto Darkening Helmet: Power Supply: Battery And Solar Powered, Light Shade: Din9-1, Dark Shade: Din4, Switching Time: 1/25000s, Delay Time: 0.1-0.8s, Sensitivity Adjustment: Stepless Control, Operation Temperature: -5 Degrees- 55 Degrees, Active Viewing Area: 93mmx43mm, Active Viewing Area Size: (+/- 10mm), Item Weight: At Least 1.85 Pounds, Package Dimensions: ‎approximately 12-12.4" (l) X 9-9.61" (w) X 7-7.68" (h)/2 Pcs Welding Magnets: 6 Pcs/set, Overall Length: At Least (3"), Hold Capacity: Up To 25lbs, Arrow Design Supports Angle: 45°, 90°, And 135°, Item Weight: 295g, Package Dimensions: ‎4.88 X 4.72 X 3.98 Inches, ‎material: Steel, Magnets Size: Approximately - Top (1-1.4cm), Bottom (6.5-7cm), Side (7-7.5cm) Thickness (1-1.3cm)/2 Pcs Welding Suit: 100% Cotton With Pyrovatex, 2 Back Pockets And Rule Pocket With Safety Gusset Feature, High Quality And Long Lasting, Two Way Zipper, Approximate Cloth Size: Large/10 Pcs Camping Dome Tent: Product Dimensions: 82.7"l X 55"w X 43.5"h, Item Weight: 4 Pounds Shape: D Shape Occupancy: 2 Person Included Components: Carry Bag, Stakes, Rainfly Water Resistance Technology 1000 Millimeters, Special Feature: Windproof, Sun Protection/outdoor Mat (banig):size (48" X 75") Material: Palm Leaves (buri)/10 Pcs Double Burner Gas Stove: Stainless Top And Front, Automatic Ignition ,reversible Trivet, Double Detachable Top Burner, Removable Drip Pan, Dimension: 730mm(l) X 395mm(w) X 105mm(h)/2 Unit Lpg Tank With Gas Regulator And Accessories: Capacity: 11kg Cylinder With Gauge And Safety Device, Safety Push Protection For Leakage, Gas Auto Safe Controller, Rubber Gasket, Steel Belted, About 1.8m Hose, With Clamp/1 Unit Gas Range: Approx. 55-70cm (l) X 50-60cm (w) X 86-93cm (h), 4-gas Burner, 62l Gas Oven, Button Ignition, Top Glass Lid, Net Weight: Maximum Of 28kg, Pan Support: Light Cast Iron Pan Support/5 Pcs Kawali: Aluminum, (diameter X Height) 28cmx8cm With Double Handle/2 Pc S Kawa: 19.5" Cast Iron With Double Handle Depth/height: 21cm (medium)/5 Pcs Wok Ladle: Material: Stainless Steel With Wooden Handle: Total Length Of Item: 24 Inches/5 Pcs Wok Spatula: Material: Stainless Steel With Wooden Handle, Total Length Of Item:24 Inches/5 Pcs Stainless Steel Long Wooden Handle Skimmer Strainer: Material: Stainless Steel, Size: 32.3*11.5cm/5 Pcs Casserole With Double Handle: Material: Aluminum, Size: 26cm, Dimension: 36(l) X 28.5(w) X 21(h)cm/5 Pcs Frying Tongs: Materials: Stainless Steel With Rubber Or Plastic Coated Handles, 12 Inch Long/5 Pcs Chopping Board: Material: Polypropylene Plastic: 8"(w) X 10"(l), 1cm (thickness)/5 Pcs Chopping Knife: 10" Stainless; Wood Handle/5 Pcs Grill/ Ihawan With Stand, Material Of Body And Stand: Stainless, 24x12x33inches (lxwxh), Depth: 5inches/1 Unit Heavy Duty Commercial Micromatic Big 7.8l Mrc-50 Rice Cooker 45cups (white)/10 Dz Melamine Round Dinner Plate: 9" Diameter, Color; White/10dz Platito (saucer): Material: Melamine Plastic, Standard Size: 6 Inch (diameter) X ¾ Inch Height/10 Pcs Serving Tray Bamboo - Wooden Tray With Handles, Color Brown Material Wood, Product Dimensions 17"l X 11"w X 2"h/10dz Drinking Glass: 8 Oz, Glass, Product Size: Base Diameter-7cm, Top Diameter: 7cm, H-11.4cm, Heat Resistant, Dishwasher Safe/10dz Spoon: Stainless, 12pcs/per Pack, Size: 8"/10dz Fork: Stainless, 12 Pcs/per Pack, Size 8"/5dz Mangkok (round Shape Bowl), Materials: Ceramic, Size: 6inch (diameter) X 5cm (height)/5 Pcs Storage Box With Wheels For Easy Transport, Measurements: L72 X W52 X H44cm, Food Grade Material, 120l Capacity, Stackable; With Lid And Handle, Color: White/2 Pcs Butcher's Knife: Materials: Stainless, Wood Handle, Size: About 10"/5 Pcs Gallon Acrylic Juice Dispenser Type: Type: Water/juice Dispensers, Overall Dimensions: Height:32 1/2 Inches, Top Diameter: 6 11/16 Inches, Capacity:1.1 Gallons, Base Material: Stainless Steel, Container Material: Acrylic, Style: Single/5 Pcs Chafing Dish Food Warmer Buffet Set: Size: 1/1pan*3, Color: Silver, Material: Stainless Steel, Product Dimensions: 13.39"l X 15.35"w X 23.62"h, Capacity: 8 Quarts/5 Pcs Chest Cooler: Item Package Dimensions: ‎25.8" (l) X 16.2" (w) X 15.7" (h), Package Weight: ‎5.76kg, Inside Dimensions: 24.95" (l) X 14.58" (w) X 14.77" (h), Material: ‎plastic, Chamber Depth: 24.95", Capacity: 52l , Color: Blue Or Red/5 Pcs Matress: Size: Semi Double (48" X 75"), Thickness: 4"/15 Pcs Matress Size: Queen (60" X 75") Thickness: 4"/15 Pcs Pillow: Size: Standard (20" X 26")/10 Sets Bed Linen Set Of 3pcs, 1-bed Sheet Size (48" X 75"), 2-pillow Case (20" X 26")/2 Sets Bed Linen Set Of 3pcs: 1-bed Sheet Size (60" X 75"), 2-pillow Case (20" X 26")/6 Unit Electric Fan: Color: Black, Electric Fan Design: Floor Fan, Power Source: Corded Electric Style: 3-speed Ac Motor Fan, Product Dimensions: 15.75"d X 17.72"w X 53.15"h, Room Type: Bedroom, Special Feature: Oscillating, Adjustable Height, Adjustable Tilt,wattage: 60 Watt/4 Unit Industrial Ceiling Fan: Product Material: Cast Aluminum Casing, Product Specifications: 2000mm, Operating Voltage: 220v, Wind Speed: 5th Gear, Number Of Fan Product Color: Black, White, Product Power: 165w, Blades: 6 Blades/150 Pcs Monoblock Chairs: With Backrest, Seat 375mmxdepth 330mm, 2.25 Kg, Class B Plastic, Thickness: Approximately 1.5in, Color: White/15 Pcs Solid Top Round Table: Material: Plastic, Color: White, Size(cm): 115 X 74 X 4.5, Foldable Legs,diameter: 45″, 6 To 8 Seater Capacity Approved Budget For The Contract : P 3,426,136.00 Contract Duration : 30 Calendar Days Delivery Period : 7 Calendar Days After The Issuance Of Notice To Proceed Source Of Fund : Trust Fund((dole) 2. The Local Government Unit Of Irosin Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By Seven(7) Calendar Days. Bidders Should Have Completed For The Last Two(2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184). Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent(60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Local Government Unit Of Irosin And Inspect The Bidding Documents At The Address Given Below From 8:00 Am-5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 8, 2025 Until January 30, 2025 From The Given Address And Philgeps Website And Lgu-irosin Website And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (p 5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees By Presenting In Person The Official Receipt Of Bid Documents To The Bac Office. 6. The Local Government Unit Of Irosin Will Hold A Pre-bid Conference On January 15, 2025, 9:00am At The Conference Room, Office Of The Mayor, Municipal Compound, San Julian, Irosin, Sorsogon Which Shall Be Open To All Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below On Or Before January 30, 2025, 8:59 Am At Bac Office, Municipal Compound, San Julian, Irosin, Sorsogon. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On January 30, 2025, 9:00 Am At The Given Address Below Conference Room, Office Of The Mayor, Municipal Compound, San Julian, Irosin, Sorsogon. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 10. The Local Government Unit Of Irosin Reserves The Right To Accept Any And All Bids, Declare A Failure Of Bidding Or Not Award A Contract At Any Time Prior To Contract Award In Accordance With Section 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations(irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11.for Further Information, Please Refer To: Judith O. Baeza Peso Municipal Compound, San Julian, Irosin, Sorsogon Url: Www.irosin.gov.ph 12. You May Visit The Following Websites: For Downloading Of Bidding Documents: Philgeps Website And Www.irosin.gov.ph Date Of Publication: January 8, 2025 _____________________ Noel D. Mercado Ii Bac Chairman Instruction To Bidders 1. Scope Of Bid The Procuring Entity, Local Government Unit Of Irosin Invites Bids For The Supply & Delivery Of Various Supplies And Materials For Dole Integrated Livelihood Program And Sustainable Industry Project, With Project Identification Number Good-01-2025. [note: The Project Identification Number Is Assigned By The Procuring Entity Based On Its Own Coding Scheme And Is Not The Same As The Philgeps Reference Number, Which Is Generated After The Posting Of The Bid Opportunity On The Philgeps Website. The Procurement Project (referred To Herein As “project”) Is Composed Of 1 Lot Various Supplies And Materials For Livelihood Program, The Details Of Which Are Described In Section Vii (technical Specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding As Indicated Below For Trust Fund(dole) In The Amount Of 2.2. The Source Of Funding Is: Three Million Four Hundred Twenty Six Thousand One Hundred Thirty Six Pesos (p 3,426,136.00) Trust Fund(dole) 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manual And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Invitation To Bid By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Inspected The Site, Determined The General Requirements Of This Project, Including Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices The Procuring Entity, As Well As The Bidders And Suppliers, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. A.foreign Ownership Exceeding Those Allowed Under The Rules May Participate Pursuant To: Iii. When The Goods Sought To Be Procured Are Not Available From Local Suppliers; Or B. Foreign Ownership Limited To Those Allowed Under The Rules May Participate In This Project. 5.3. Pursuant To Section 23.4.1.3 Of The 2016 Revised Irr Of Ra No. 9184, The Bidder Shall Have An Slcc That Is At Least One(1) Contract Similar To The Project The Value Of Which, Adjusted To Current Prices Using The Psa’s Cpi, Must At Least Equivalent To: A. For The Procurement Of Expandable Supplies: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Twenty Five Percent (25%) Of The Abc. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.2 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un, Subject To Domestic Preference Requirements Under Itb Clause 18. 7. Subcontracts 7.1. The Bidder May Subcontract Portions Of The Project To The Extent Allowed By The Procuring Entity As Stated Herein, But In No Case More Than Twenty Percent (20%) Of The Project. The Procuring Entity Has Prescribed That: A. Subcontracting Is Not Allowed. 7.2 Subcontracting Is Not Allowed During The Bidding. 7.3 Subcontracting Is Not Allowed During The Contract Implementation Stage. 7.4 Subcontracting Of Any Portion Of The Project Does Not Relieve The Supplier Of Any Liability Or Obligation Under The Contract. The Supplier Will Be Responsible For The Acts, Defaults, And Negligence Of Any Subcontractor, Its Agents, Servants, Or Workmen As Fully As If These Were The Contractor’s Own Acts, Defaults, Or Negligence, Or Those Of Its Agents, Servants, Or Workmen. 8. Pre-bid Conference The Procuring Entity Will Hold A Pre-bid Conference For This Project On January 15, 2025, 9:00am At The Conference Room, Office Of The Mayor, Municipal Compound, San Julian, Irosin, Sorsogon. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Viii( Checklist Of Technical And Financial Documents). 10.2. The Bidder’s Slcc As Indicted In Itb Clause 5.3 Should Have Completed Within The Last Two(2) Years Prior To The Deadline For The Submission And Receipt Of Bids. 10.3. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. Similar To The Required Authentication Above, For Contracting Parties To The Apostile Convention, Only The Translated Documents Shall Be Authenticated Through The Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Viii( Checklist Of Technical And Financial Documents). 11.2. If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification From Dti Shall Be Provided By The Bidder In Accordance With Section 43.1.3 Of The 2016 Revised Irr Of Ra No. 9184. 11.3. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.4. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 3184. 12. Bid Prices 12.1 Prices Indicated On The Price Schedule Shall Be Entered Separately In The Following Manner: A.for Goods Offered From Within The Procuring Entity’s Country: I. The Price Of The Goods Quoted Exw(ex-works,ex-factory,ex-warehouse,ex-showroom, Or Off The Shelf, As Applicable); Ii. The Cost Of All Custom Duties And Sales And Other Taxes Already Paid Or Payable; Iii. The Cost Of Transportation, Insurance, And Other Costs Incidental To Delivery Of The Goods To Their Final Destination; And Iv. The Price Of Other(incidental) Services, If Any, Listed In The Bds. 13. Bid And Payment Currencies 14.1. For Goods That The Bidder Will Supply From Outside The Philippines, The Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Adopted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreigh Currencies, Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 14.2. Payment Of The Contract Price Shall Be Made In: Philippine Pesos 14. Bid Security 15.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 15.2. The Bid And Bid Security Shall Be Valid Until One Hundred Twenty(120) Calendar Days. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 15. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. If The Procuring Entity Allows The Submission Of Bids Through Online Submission To The Given Website Or Any Other Electronic Means, The Bidder Shall Submit An Electronic Copy Of Its Bid, Which Must Be Digitally Signed. An Electronic Copy That Cannot Be Opened Or Is Corrupted Shall Be Considered Non-responsive And, Thus, Automatically Disqualified. 16. Deadline For Submission Of Bids The Bidders Shall Submit On The Specified Date And Time And Either At Its Physical Address Or Through Online Submission As Indicated In Paragraph 7 Of The Ib. 17. Opening And Preliminary Examination Of Bids 18.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 18.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 18. Domestic Preference 18.1 The Procuring Entity Will Grant A Margin Of Preference For The Purpose Of Comparison Of Bids In Accordance With Section 43.1.2 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Entity’s Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, Bidders May Submit A Proposal On Any Of The Lots Or Items And Evaluation Will Be Undertaken On A Per Lot Or Item Basis, As The Case Maybe. In This Case, The Bid Security As Required By Itb Clause 14 Shall Be Submitted For Each Lot Or Item Separately. 19.3. The Descriptions Of The Lots Or Items Shall Be Indicated In Section Vii(technical Specifications), Although The Abcs Of These Lots Or Items Are Indicated In The Bds For Purposes Of The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184. The Nfcc Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 19.4. The Project Shall Be Awarded As Follows: Option 1- One Project Having Several Items That Shall Be Awarded As One Contract. 20. Post Qualification Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps), And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Bid Data Sheet Itb Clause 5.3 For This Purpose, Contracts Similar To The Project Shall Be: A. Supply & Delivery Of Various Supplies And Materials For Dole Integrated Livelihood Program And Sustainable Industry Project Brief Description: 4 Pcs Barber Brush: 23.3cmx7cm, Soft Fiber Material And Wooden Handle/4 Pcs Hair Clipper: Electric, 110v-240v, 50-60hz,all Metal Machine,led Light Display Stainless Steel Blade, Blade Width 45mm,low Noise High Power, 2000 Ma Lithium Battery, 210 Minutes Working Time,4pcs Comb Guide 3/6/10/13mm,body Size: 17x4cm, Body Weight: 371g,with Complete Accessories - Fiber Comb, Cleaning Brush, Lubricant, Charger/4 Pcs Paddle Brush:body Material: Wood, Dimensions: (lxwxh) 25x8x3cm, Brown/8pcs Spray Bottle: 250ml Plastic Hairdressing Spray Bottle/4pcs Hair Blower: 4000w Accurate Power,2-speed Settings (high & Low), 3 Temperature (cold, Hot & Hotter), Glossy, Thick Long Wires, With Light And Perfume Button/4pcs Hair Blower: 4000w Accurate Power,2-speed Settings (high & Low), 3 Temperature (cold, Hot & Hotter), Glossy, Thick Long Wires,with Light And Perfume Button/4pcs Trolley With Blower Holder: 5-layered Wheeled Trolley Cart, Height: 35"/89cm,length: 20.9"/52cm,width: 14"/36cm,4 Drawers, Blower Holder/4pcs Talcum Powder: 200g, Hypo-allergenic, Dermatologist Tested/4 Pcs Cordless Clipper: Body Material: Aluminum,motor: Rotary,power/source Battery: Lithium-ion Battery (90+ Minutes Of Runtime), Blades: Titanium Blades, 3 Guide Combs Plastic Material (#1/2, #1, And #1½),cutting Lengths: 0.4-25mm,inclusions: A Blade Guard, 1 Recharging Transformer (charger), 1 Cleaning Brush, With Lubricating Oil Of At Least 5 Ml And English User Manual,product Dimension: Approximately 6.5-7" (l) X 2-3" (w),weight: Maximum Of 400g, Input: Can Be Used For 110-240 Voltage/4pcs Hair Trimmer: Running Time 120 Minutes Battery Powered, Rechargeable Li-ion Battery 1500 Mah, Dimension: Approximately 6-7" (l) X 1.5-2.5 (w), Material: Stainless,accessories: 4 Plastic Combs In Different Sizes 3mm, 6mm, 9mm, 12mm, Inclusions: 1 Recharging Transformer (charger) And 1 English User Manual, Input: Can Be Used For 110-240 Voltage/4pcs Electric Shaver: With 3d Floating Cutter Head, 40mins. Running Time For 8hrs Fully Charged, Material: Stainless Steel,product Dimension: Approximately 6.5-7" (l) X 2-3" (w),automatic Voltage 100-240v,battery: 2 Cell Nickel-metal Hydride Cylindrical Battery Pack, 4000mah,power Type: Rechargeable/4pcs Hair Shear: Material: Stainless Steel,1 Precision Scissor Approximately 6-7",1 Thinning Scissor Atleast 6",accesories: Scissors Oil Atleast 5ml/4 Pcs Razor Blades: 10pcs/box (double Edge Stainless)/4 Pcs Shaving Razor/labaha: Dimensions: Approximately 5-6" (l) X 3/4-1" (w), Material: Carbon Steel, Color: Black/ 4 Pcs Barber Skin Fade Brush: Handle: Wood, With Soft Bristles 1" (l),dimensions: Atleast 5.5" (l) X 1" (w)/4pcs Comb Set: (4pcs/set), Material: High Quality Plastic, Inclusions: #1-approx. Size: 4.88" (l) X 1.02" (w), #2-approx. Size: 7.09" (l) X 1.46" (w), #3-approx. Size: 7.87" (l) X 1.18" (w), #4-6.10" (l) X 0.20" (w)/4pcs Shaving Gel: (foam), 195g/4pcs Barber's Cape: Color: Black,about 140cm (l) X 110cm (w), Cloth: Polyester/4pcs 360 Degree Swivel Barber Chair: Classic Back Seat With Chrome Steel Base, Premium Steel Frame And High Class Foot Pump, Heavy Duty Leather Cover; Lower Height - At Least 51cm, Top Height - At Least 61cm, Sandles Height - At Least 40cm/8pcs Barber Apron: With Two Pockets, Waterproof, Material: Cotton And Acrylic, Item Size: Approx. 38-38.19" (l) X 27-27.36" (w)/ 4pcs Pomade: 80g, Water-based/26pcs Speed Square: Material: Cast Aluminum, Size: About 18x18x2cm/7.09x7.09x0.79", Weight: About 130g, Triangle-shaped/26pcs Meter Tape With Magnetic Hook: Blade Material, Nylon Coated Blade,dimensions: 16ft (l) X 25mm (w)/26pcs Circular Saw: Voltage: 220-240v, Frequency: 50-60hz, Input Power: 1400w, No-load Speed: Atleast 4800rpm, Blade Diameter: 185mm, Cutting Capacity: 45degree,44mm, 90 Degree: 65mm,maximum Cutting Depth: Atleast 90°62mm, Weight: Maximum Of 5.2kg,item Approximate Dimension: 15-17cm (h), 25-28cm (w), 30-35cm (l)/26pcs Angle Grinder: Rated Input Power: 730w, Wheel Diameter: 4", Rated Voltage: 220v,frequency: 60hz, No Load Speed: 12,000 Rpm, Weight: Approximately 1.6kg, Grinding Spindle Thread: M10, Disc Diameter: 100mm X 1 X 16mm, Dimension: 298mm (l), 77mm (w), 102mm (h )/26pcs Angle Grinder Cutting Disk: 10 Pcs. Per Set, Dimensions: Approx. 105mm (4") X 1.2mm (3/64"') X 16mm (5/8")/26 Pcs Portable Hand Drill: Power Sourced: Battery Powered - 2pc 21 Volt 1500mah Lithium-ion Batteries, Maximum Rotational Speed: 1500 Rpm, Voltage: 210v,amperage: 1.5 Amps, Chuck Size: 0.38",bit Heads Diameters: From 0.8mm-10mm,product Dimensions: ‎9.6" (l) X 2.1" (w) X 7.5" (h), Material: ‎plastic, Rubber, Metal, Item Dimensions: Approx. ‎9.6" (l) X 2.1" (w) X 7.5" (h),item Weight: Atleast ‎2.5 Pounds,item Torque: 330 Inch Pounds; Inclusions: 1x21 Volt Inspiritech Cordless Power Drill, 2x Rechargeable Battery, 1x English User Manual, 10x Self-drilling Drywall Anchors,10x Screwdriver Bits, 2x Double Ended Bits, 3x Drilling Bits, 1x Magnetic Extension Socket Bit Holder, 10x Anchors With Screws,1x One-hour Fast Charger, 1x Flexible Extension Shaft, 1x Carrying Bag/26pcs Wood Planer: Rated Voltage: 220v, Rated Input Power: 600w, Cutting Width: 82mm, Load Speed: 15,000rpm, Frequency: 60hz, Weight: 3kg./26 Pcs Framing Hammer: Handle Material: Alloy Steel, Item Dimensions: Approximately 16-17" (l) X 5.75-6" (w) X 1.5-2" (h), Item Weight: Atleast 1.4 Pounds/26 Pcs Trim Hammer: Handle Material: Wood, Head Material: Alloy Steel; Item Dimensions Approximately: 14-15" (l) X 5-6"(w) X 1-2" (h),item Weight: Atleast 594 Grams/26pcs Roofing Hammer: Item Weight: ‎1.25 Pounds, Product Dimensions: Approx. 13.7" (l) X 6.75" (w) X 1.5" (h)/26 Pcs Chalk Line: Item Weight: 10.6 Ounces, Product Dimensions: ‎approx. 1200" (l) X 4.72" (w) X 5.91" (h) Inches, Color: ‎blue, Material Type: Alloy Steel, Rubber/26 Pcs Utility Knife: Handle Material: Aluminum, Material: Aluminum Alloy, Weight: 120g/pcs, Blade Size: 19mm (w) X 61mm (h) X 0.6mm (t),blade Material: Steel, Thickness: Atleast 0.6mm/26 Pcs Tin Snips: Item Weight: ‎atleast 1 Pound, Package Dimensions: Approx. 12.36" (l) X 3.7" (w) X 1.3" (h),size: ‎long Straight, 12 Inches Long, Blade Length: 3.20",material: Steel, Cutting Thickness Range Up To 1.2mm Carbon Steel And 0.7mm/26 Pcs Framing Square: Shorter Leg Measures At 8 Inch Outside And 6.5 Inch Inside, Longer Leg Measures At 12 Inch Outside And 11 Inch Inside,material: Carbon Steel/26 Pcs Level: Box Beam Style, Material: Aluminum,dimension: Approximately 24-24.5" (l) X 2-2.6" (w) X 1.2-1.5" (h), Weight: Atleast 0.8 Pounds/26 Pcs Electric Planer: Voltage: 220-240v,input Power: 1050w, No Load Speed: 1600rpm, Planing Width And Depth,82x3mm,heavy Duty Aluminum Base/1 Pc Meter Tape With Magnetic Hook: Blade Material: Nylon Coated Blade, Dimensions: 16ft (l) X 25mm (w)/1 Pc Air Compressor Machine: Motor Power: 1hp, Size: Approx. 935x385x800mm,voltage: 220-240v, 60hz, Speed: 3400 Rpm, Tank Capacity: 24l , Operating Pressure: Max 8 Bar, Air Displacement: 93l/min, Pump Lubricated With Oil/1 Pc Blue Painters Tape, Color: Blue, Size: Atleast 1.41" X 20m,thickness: 0.13mm, Item Weight: 1.92 Pounds, Material: Paper/2pcs Electric Spray Gun: Voltage: 220-240v~50/60hz,spraying Pressure: 0.1-0.2 Bar, Max Flow: 850ml/min, Max Viscosity: 50din-s, Container Capacity: Atleast 800ml,power Cord Length: 2m, Rated Power 500w, Spraying Pressure: Atleast 0.1-0.2bar, Item Dimensions: Approximately 13" (l) X 5" (w) X 11" (h)/1 Pc Extension Pole, (3 Stage Extender) Reach: 1.5-to-3ft,weight: Maximum Of 0.5 Pounds, Max. Standing Reach: 10ft, Material : Aluminum/2 Pcs Paint Brush Set, 5 Pcs/set, Material: Synthetic Bristle, Wood Handle, Overall Length: Atleast 11", Bristles Length: Atleast 3", Brush Width: 1", 1-1/2" 2", 2-2.5", 3"and 4"/ 5 Pcs Paint Roller, Material: Plastic,package Dimensions: Approximately 15.16" (l) X 11.22" (w) X 3.15" (h),item Weight: Atleast 1.06 Pounds, Inclusion: Roller, Atleast 7" In Length, Material: Polyester/2 Pcs Painters Gloves, 12 Pcs/pack, Material: Cotton, Color: Red/1 Pc Putty Knife/paint Scraper Set (4pcs), Stainless Steel Blade With Rubberized Handle, Blade Width: 1", 2" And 3", Length Including Handle: Approximately 8-9"/1 Pc Steel Float/plastering Trowel: Thickness: Atleast 0.7 Mm, Surface Measurement, Length: 12", Width: 4", Material: High Carbon Steel With Wood Handle/2 Pcs Lpg Tank With Gas Regulator And Accessories, Capacity: 11kg Cylinder With Gauge And Safety Device, Safety Push Protection For Leakage, Gas Auto Safe Controller, Rubber Gasket, Steel Belted, About 1.8m Hose, With Clamp/2 Pcs Kawali: Aluminum, (diameter X Height) 28cmx8cm With Double Handle/2 Pcs Food Warmer/chafing Dish: Rectangular, 2l Capacity, 6 Pcs In 1 Set Stainless Steel, No Side Handle, Glass Lid Cover With Handle, Dimensions: Same Sizes - 32cm (l) X 26cm (w) X 8cm (h)/2 Pcs Gas Range: Approx. 55-70cm (l) X 50-60cm (w) X 86-93cm (h), 4-gas Burner, 62l Gas Oven, Button Ignition, Top Glass Lid, Net Weight: Maximum Of 28kg, Pan Support: Light Cast Iron Pan Support/2 Pcs Baking Sheet: Aluminum, 12x16 Inches/2 Pcs Digital Kitchen Scale: Accurate Measurement; Weigh Up To 5 Kg / 11 Lb Precisely In 1 G / 0.05 Oz Increments, Quality Material: Measure Food, Small Items, And Liquids With Confidence On The 304 Food-grade, Stainless Steel Platform, Approx. Dimension 7.3-7.5" (l) X 5.7-5.90" (w) X 0.6-08" (h), 2 X 1.5v Aaa Batteries/2 Pcs Measuring Cup (for Liquid Ingredients): 1 Measuring Cup With Red Graphics, Made Of Non-porous Glass That Won't Warp, Stain, Or Absorb Odors, Glass Is Preheated Oven, Microwave, Fridge, Freezer & Dishwasher Safe, Dimension: Approx. 7.13" (l) X 6.75" (w) X 4.38" (h), Measuring Capacity: 500ml/2 Pcs Measuring Cups (for Dry Ingredients): Material: Stainless Steel, 5 Pieces Per Set (1 Cup, 1/2 Cup, 1/3 Cup, 1/4 Cup, 1/8 Cup)/2 Pcs Measuring Spoons (set): 7pcs Stainless Measuring Spoon Kit, The Kit Includes: 1/8 Tsp (0.63ml), 1/4 Tsp (1.25ml), 1/2 Tsp (2.5ml), 3/4 Tsp (3.75ml), 1 Tsp (5ml), 1/2 Tbsp (7.5ml), 1 Tbsp (15ml)/2 Pcs Mixing Bowl: Medium, Approx. Diameter: 28cm, Height:11.2cm, Material: Stainless; Capacity: At Least 4l/2 Pcs Standmixer: 2-in-1 360 Automatic Rotating Bowl Electric Stand & Hand Mixer, 4.5l W/ 5-speed Turbo Function,color: Black/1 Pc Double Burner Gas Stove: Stainless Top And Front, Automatic Ignition ,reversible Trivet, Double Detachable Top Burner, Removable Drip Pan, Dimension: 730mm(l) X 395mm(w) X 105mm(h)/1 Pc Lpg Tank With Gas Regulator And Accessories: Capacity: 11kg Cylinder With Gauge And Safety Device, Safety Push Protection For Leakage, Gas Auto Safe Controller, Rubber Gasket, Steel Belted, About 1.8m Hose, With Clamp/1 Pc Caldero: Aluminum, #2, Diameter Height 28cmx16cm With Double Handle/2 Pcs Kawali: Aluminum, (diameter X Height) 28cmx8cm With Double Handle/1 Pc Kawa: 19.5" Cast Iron With Double Handle Depth/height: 21cm (medium)/1 Pc Food Warmer/chafing Dish: Rectangular, 2l Capacity, 6 Pcs In 1 Set Stainless Steel, No Side Handle, Glass Lid Cover With Handle, Dimensions: Same Sizes - 32cm (l) X 26cm (w) X 8cm (h)1 Pc Food Glass Display (estante): 3 Layers; 20(h)x18(w)x36(l)", Aluminum Base, Glass With Screen Door/1 Pc Casserole With Double Handle: Material: Aluminum, Size: 26cm Dimension: 36(l) X 28.5(w) X 21(h)cm/2 Pcs Frying Tongs: Materials: Stainless Steel With Rubber Or Plastic Coated Handles, 12 Inch Long/1 Pc Chopping Board: Material: Polypropylene/1 Pc Chopping Knife: 10” Stainless,wood Handle/1 Pc Butcher's Knife: Materials: Stainless, Wood Handle, Size: About 10"/1 Pc Plastic Table: 4 Seaters, Square Type With Umbrella Hole At The Center, Table Dimension: 36" (length) X 36" (width) X 30" (height), Thickness: Approximately 1.5in To 2in; Color: Beige2 Pcs Monoblock Chairs: With Backrest, Seat 375mmxdepth 330mm, 2.25 Kg, Class B Plastic, Thickness: Approximately 1.5in, Color: Beige/1 Pc Beach Umbrella: 90" Diameter X 8 Ft. Height, 8 Rib Round Metal Pole, Polyester Multi-coloured Umbrella Canopy/2 Pcs Cooler Container: Chest Insulated Cooler, Materials: Polystyrene, Sizes And Capacities: 30 Liters - 45.5cm(l) X 39cm(w) X 31cm(h),color: Blue Or Red/1 Pc Grill/ Ihawan With Stand,material Of Body And Stand: Stainless , 24x12x33inches (lxwxh), Depth: 5inches/2 Pcs Bicycle With Sidecar: Bicycle Specifications: Bmx Type Bike (frame 1//2 Gi Hd, Rim Set Front X 10 G Wide Jap Hub, Rim Set Rear X 10g Wide Jap Hub, Tire 20 X 2.125 Jumbo, Tube 20 X 2.125, Handle Bar Painted Black, Fork Ex-900 Landing Gear Cp, Head Parts Nikyo/whw, H-post Bmx Ord.m, H-grip Ord. Opc Parts Neco Bearing Type, Opc Plate 36t, Chain Cp Bmx, Freewheel 24t, Pedal Opc Bearing Type, Seat Clamp/s-pin/ S-post P, Saddle With Spring, Footbreak With Spring "full Size" Frame, 175-180mm Cranks Side Car With Umbrella Holder And 2 Chest Coolers Carrier (52l Capacity) - Dimensions: ‎25.8" (l) X 16.2" (w) X 15.7" (h) Materials: 1/2 J1 Pipe 540, 316 X 1 Flat Square Bar, J1 Pipe De Una 520, 1/4 X 2 Flat Bar, 6203 Gi Set, Tire 20 X 2.125 Jumbo/2 Pcs Weighing Scale: 10kg Capacity, Colored Body / Stainless Pan, Graduation: 50g, Powder Coated Body, Pan Size: 255mm Ø X 55mm Deep, Dial Face: 185mm Ø, 4 Units/master Carton/4 Pcs Plastic Fruit Crate 21 X 15 X 12 Inches/1 Pc Hair Dryer, With 3 Temperature Setting (from High To Low): Size: Atleast 200mm (h), 74mm (w), Weight: Minimum Of 315g, Wattage: 2200w, Voltage: 120-240v, Body Material: Plastic/1 Pc 2 In 1 Steam Pro Hair Straightener (straightener & Curler): Tourmaline Ceramic Wide Plates - 1.25" Wide Heating Plate, Adjustable Temperature Display - 150-235◦c, 360◦, Swivel Cord - Tangle-free, Hanger Design, Ptc Heater - Instant Heat-up/1 Pc Hair Combs: Material: Plastic, Inclusions: Flat Comb Size - 21.5cm (l) X 4.2cm (w), Massage Comb Size: 22cm (l) X 8.5cm (w), Ribs Comb Size: 21.5cm (l) X 4cm (w), Curling Comb Size: 20.2cm (l) X 2.5cm (w), Mirror Size: Atleast 22cm (l) X 10cm (w); Storage Base Size: Atleast 10cm (l) X 15cm (w), Package Size: Approx. 22-23cm (l) X 16cm (w) X 11cm (h), Package Weight: Approx. 305g/1 Pc Hair Clips: Plastic, Product Size: Approx. 4.5", Color: Black (12pcs)/1 Pc 7pcs Face Brush Set, Inclusion: Powder Brush, Size: 17cm, Bristle Length: 3.2cm, Ferrule Width:1.9cm, Powder Buffer Brush, Size: 19cm, Bristle Length: 5cm, Ferrule Width: 2.1cm,foundation Brush, Size: 17cm, Bristle Length: 3.3cm, Ferrule Width: 2.2cm, Flat Foundation Brush, Size: 17cm,bristle Length: 3.2cm; Ferrule Width:1.2cm, Highlight Brush, Size: 16.5cm,bristle Length: 2.7cm, Ferrule Width: 2.3cm,angle Cheek Brush, Size: 17cm, Bristle Length: 3.1-2.3cm,ferrule Width: 2.4cm, Highlighting Fan Brush, Size: 16.5cm, Bristle Length: 4cm, Ferrule Width: 2.5cm, With Brush Bag/1 Pc Eyelash Curler: Material: Carbon Steel, Size: Approx. 5.91 X 3.94 X 1.97"/1 Pc Eyebrow Razor: Handle Material: Plastic, Size: Approx. 6.8(l) X 2(w) X 0.1"(h), 6pcs/pack/1 Pc Makeup Sponge Set Blender: Material: Sponge, Size: Approx. 4.02 (l) X 3.94(w) X 2.52"(h), 4pcs/set/1 Pc False Eyelashes, Product Dimensions: ‎ Approx. 0.75(l) X 3.88(w) X 5.38"(h), 5pairs/pack/1 Pc Eye Shadow Pallete: 12 Curated Peach-inspired Shades, Finish Type: Metallic, Matte, Product Dimension: Approx. 0.08 (l) X 0.04 (w) X 0.06" (h)/1 Pc Contour Palette: Multi-colored, Finish Type: Matte, Package Dimension: Approx. 5.75 (l) X 4.25 (w) X 0.5" (h)/1 Pc Hypercurl Waterproof Mascara Make Up Set: Product Dimensions: Approx. ‎0.85 (l) X 2.75 (w) X 5.63" (h), Color: Black/1 Pc Waterproof Matte Gel Eyeliner Pencil: Item Form: Pencil, Powder, Creamy, Finish Type: Matte, Product Dimensions: About‎ 5.77 X 1.97 X 0.81", Color: Black/1 Pc Eyebrow Gel, Waterproof: Weight: About 0.16 Oz, Product Dimension: Approx. 0.75 (l) X 1.9 (w) X 5.65 (h) Inches, Color Black, Brown/1 Pc Blush On, 3 Complimentary Skin-flushed Shades, Product Dimensions: Approx. 2.89 (l) X 0.43 (w) X 2.33" (h)/1 Pc Powder Blush Makeup Palette, Product Dimensions: ‎approx. 2.43 (l) X 2.43 (w) X 0.66" (h)/1 Pc Eye Shadow Palette; 12 Curated Peach-inspired Shades, Finished Type:metallic,matte, Product Dimensions:approx 0.08(l)x0.04(w) X0.06”(h)/ 1 Pc Applicator Brush And Plastic Comb: 13cm Black, Double-sided Comb, Pointed Handle For Sectioning Hair/1 Pc Hair Clipper: Electric; 110v-240v, 50-60hz,all Metal Machine, Led Light Display Stainless Steel Blade, Blade Width 45mm,low Noise High Power, 2000 Ma Lithium Battery, 210 Minutes Working Time, 4pcs Comb Guide 3/6/10/13mm, Body Size: 17x4cm, Body Weight: 371g, With Complete Accessories - Fiber Comb: Cleaning Brush, Lubricant, Charger/1 Pc Spray Bottle: 250ml Plastic Hairdressing Spray Bottle/1 Pc Trolley With Blower Holder: 5-layered Wheeled Trolley Cart, Height: 35"/89cm, Length: 20.9"/52cm, Width: 14"/36cm, 4 Drawers, Blower Holder/1 Pc Curling Iron: 220v Power, 4gen; White, 32x25x13mm, Energy Efficient-48w,360degree Rotating Tail, Automatic Hair Curler, Iron Ceramic, Adjustable Size/1 Pc Apron: Length: 76cm, Width: 59cm, Color: Black, Material: Nylon, Waterproof/1 Pc Curling Rod: Small, 2cm, Cylindrical, Plastic Resin With Rubber Band Kits,multi-color/1 Pc Curling Rod: Medium, 2.5cm, Cylindrical, Plastic Resin With Rubber Band Kits, Multi-color/1 Pc Curling Rod: Large, 3cm, Cylindrical, Plastic Resin With Rubber Band Kits, Multi-color/1 Pc Spray Net: 600ml, 27.5cm, Hard Hold/1 Pc Hair Spray Aerosol Extra Hold: Weight: About 7ounces /198g, Scented, Package Dimensions: ‎7.83 X 6.69 X 2.17"/1 Pc Hair Trimmer: Running Time 120 Minutes Battery Powered,rechargeable Li-ion Battery 1500 Mah, Dimension: Approximately 6-7" (l) X 1.5-2.5 (w), Material: Stainless; Accessories: 4 Plastic Combs In Different Sizes 3mm, 6mm, 9mm, 12mm, Inclusions: 1 Recharging Transformer (charger), And 1 English User Manual, Input: Can Be Used For 110-240 Voltage/3 Pcs Hair Dryer, With 3 Temperature Setting (from High To Low): Size: Atleast 200mm (h), 74mm (w), Weight: Minimum Of 315g, Wattage: 2200w, Voltage: 120-240v,body Material: Plastic/3 Pcs 2 In 1 Steam Pro Hair Straightener (straightener & Curler): Tourmaline Ceramic Wide Plates - 1.25" Wide Heating Plate, Adjustable Temperature Display - 150-235◦c, 360◦, Swivel Cord - Tangle-free; Hanger Design, Ptc Heater - Instant Heat-up/3 Pcs Hair Combs: Material: Plastic, Inclusions: Flat Comb Size - 21.5cm (l) X 4.2cm (w), Massage Comb Size: 22cm (l) X 8.5cm (w), Ribs Comb Size: 21.5cm (l) X 4cm (w),curling Comb Size: 20.2cm (l) X 2.5cm (w), Mirror Size: Atleast 22cm (l) X 10cm (w), Storage Base Size: Atleast 10cm (l) X 15cm (w),package Size: Approx. 22-23cm (l) X 16cm (w) X 11cm (h), Package Weight: Approx. 305g/3 Pcs Hair Clips: Plastic, Product Size: Approx. 4.5",color: Black (12pcs)/3 Pcs Disposable Latex Free Gloves: Non-sterile, 100 Pcs Per Pack, Product Dimensions: Approx.‎ 8.6" (l) X 4.9" (w) X 3" (h), Weight: 1.25 Pounds, Material: Synthetic Pvc/3 Pcs Cutting Scissors: 6" Stainless Steel, 65g/3 Pcs Thinning Scissors: 17.5x5cm Stainless Steel/3 Pcs Drip Pan: 32cmx35cm Plastic, Black/3 Pcs Hair Clipper: Electric,110v-240v, 50-60hz,all Metal Machine,led Light Display Stainless Steel Blade, Blade Width 45mm, Low Noise High Power, 2000 Ma Lithium Battery, 210 Minutes Working Time, 4pcs Comb Guide 3/6/10/13mm, Body Size: 17x4cm, Body Weight: 371g,with Complete Accessories - Fiber Comb, Cleaning Brush, Lubricant, Charger/3 Pcs Nail Tool Set: Material: Stainless Steel, Case: Leather, Package Size: Approximately 15-15.5cm (l) X 8cm (w) X 2cm (h),inclusions: Cuticle Trimmer (95mm), Blackhead Needle And Loop Remover (83mm), Eyebrow Tweezer (86mm) Peeling Knife (90mm), Nail File (75mm), Ear Pick (78mm), Double Pick (75mm), Dead Skin Fork (86mm), Small Pedicure Plier (95mm), Acne Needle (83mm), Small Nail Clipper (62mm) Bevel Nail Clipper (61mm), Large Nail Clipper (82mm), Beauty Tip Scissor (89mm), Pusher/3 Pcs Cotton Balls: 300g (100 Pcs Large Cotton Balls)/3 Pcs Nail Polish: Volume: 15ml, With 24 Colors Inclusions: 14k Gold, 18k Gold, 24k Gold, African Plum, Baby Pink, Black Velvet, Carolina Peach, Cashmere, Emerald Shimmer, Golden Bronze, Italian Nude, Platinum Special, Pussy Red, Red Pearl, Saphire Glow, Silver Platinum, Simply Red, Tahiti Brown, White Satin, White Rose, Platinum Silver, Touch Of Tan, Touch Of Beige, Colorless/3 Pcs Foot Spa Soaker: With Pumice Stone, Package Dimensions: Approximately 16.42" X 13.58" X 7.91", Weight: About 4.63 Pounds, Rated Power: 500 Watts, Rated Voltage: 110~120v, Rated Frequency: 50hz, Temperature Adjustable Range: 35℃ To 48℃/3 Pcs Astringent Foot Soaker: 128oz/3 Pcs Cooling Foot Soak: Product Dimensions: ‎approximately 6.5-7" X 2.38-2.50" X 9.259.50", Weight: Atleast 900g/3 Pcs Exfoliating Foot Scrub: Package Dimensions: Approximately‎ 7.05-7.50" X 2.32-3" X 1.97-2", Weight: Atleast 6oz/3 Pcs Foot File And Callus Remover: Material: Metal, Steel, Item Dimensions: Approx. 10-10.78" X 2.7" X 0.29", Item Weight: 3.2 Pounds/3 Pcs Foot Scrub/3 Pcs Manicurist Bag: Made Of Heavy Duty Nylon, Large Capacity: Enough Room To Hold Up To 42 Bottles Of 15ml Nail Polish, Size: Approx. 8-9" (l) X 6-7" (w) X 4-5" (h)/3 Pcs Spray Bottle: 250ml Plastic Hairdressing Spray Bottle/3 Pcs Trolley With Blower Holder: 5-layered Wheeled Trolley Cart, Height: 35"/89cm, Length: 20.9"/52cm, Width: 14"/36cm, 4 Drawers, Blower Holder/3 Pcs Apron: Length: 76cm, Width: 59cm,color: Black,material: Nylon, Waterproof/3 Pcs Alcohol: 70% Ethyl Alcohol With Moisturizer,500ml/3 Pcs Shampoo: 1000ml, Green Apple And Citrus Lemon Variant/3 Pcs Hair Spa: 1000ml, Lavender And Strawberry Variant/3 Pcs Hot Oil: Keratin Organic Hot Oil, 1000ml, Aloe Vera Variant/3 Pcs Hair Cellophane: 500ml, Natural, Brown,burgundy And Ash Blonde Variant/3 Pcs Hair Rebonding Set: 1000ml Hair Straightening And Hair Neutralizing (ion Perm)/3 Pcs Hair Color Dye:100 Ml, 2pcs Each (black, Dark Brown, Medium Brown, Light Brown, Blonde, Light Blond, Lighter Blonde, Lightest Blonde, Dust)/3 Pcs Hair Color Developer: 100ml 2pcs Each 6%, 9%, 12% Oxidizer/3 Pcs Hair Bleaching Powder: 500g/3 Pcs Brazilian Blowout: 120ml, 3-in-1 Set (clarifying Shampoo, Brazilian Blowout, After Treatment Conditioner)/24 Pcs Hair Dryer, With 3 Temperature Setting (from High To Low): Size: Atleast 200mm (h), 74mm (w), Weight: Minimum Of 315g, Wattage: 2200w, Voltage: 120-240v, Body Material: Plastic/24 Pcs 2 In 1 Steam Pro Hair Straightener (straightener & Curler): Tourmaline Ceramic Wide Plates - 1.25" Wide Heating Plate, Adjustable Temperature Display - 150-235◦c, 360◦,swivel Cord - Tangle-free, Hanger Design, Ptc Heater - Instant Heat-up/24 Pcs Hair Combs: Material: Plastic, Inclusions: Flat Comb Size - 21.5cm (l) X 4.2cm (w), Massage Comb Size: 22cm (l) X 8.5cm (w), Ribs Comb Size: 21.5cm (l) X 4cm (w), Curling Comb Size: 20.2cm (l) X 2.5cm (w), Mirror Size: Atleast 22cm (l) X 10cm (w), Storage Base Size: Atleast 10cm (l) X 15cm (w), Package Size: Approx. 22-23cm (l) X 16cm (w) X 11cm (h), Package Weight: Approx. 305g/24 Pcs Hair Clips: Plastic, Product Size: Approx. 4.5", Color: Black (12pcs)/24 Pcs Disposable Latex Free Gloves: Non-sterile, 100 Pcs Per Pack, Product Dimensions: Approx.‎ 8.6" (l) X 4.9" (w) X 3" (h), Weight: 1.25 Pounds, Material: Synthetic Pvc/24 Pcs Drip Pan: 32cmx35cm Plastic, Black/24 Pcs Shower Caps: 32cm, Thick Plastic, Elastic, Washable/24 Pcs Trolley With Blower Holder: 5-layered Wheeled Trolley Cart, Height: 35"/89cm, Length: 20.9"/52cm, Width: 14"/36cm, 4 Drawers, Blower Holder/24 Pcs Curling Iron: 220v Power, 4gen, White, 32x25x13mm, Energy Efficient-48w, 360degree Rotating Tail, Automatic Hair Curler, Iron Ceramic, Adjustable Size/24 Pcs Hair Steamer: With 4 Wheels, 360degrees Movable, Gray Color, Adjustable Height With Timer And Control/120 Pcs Cape: 140x110cm, Satin, Nylon, Waterproof, Black/72 Pcs Microfiber Towel: 25x65cm, 135g, Microfiber, Dark Colors/24 Pcs Curling Rod:small, 2cm, Cylindrical, Plastic Resin With Rubber Band Kits, Multi-color/24 Pcs Curling Rod: Medium, 2.5cm, Cylindrical, Plastic Resin With Rubber Band Kits, Multi-color/24 Pcs Curling Rod: Large, 3cm, Cylindrical, Plastic Resin With Rubber Band Kits, Multi-color/120 Pcs Ear Caps: (l X W X T): 8cm X 4.5cm X 2.1cm/3.15" X 1.77" X 0.83", Black,plastic/24 Pcs Shampoo: 1000ml, Green Apple And Citrus Lemon Variant/24 Pcs Hair Spa: 1000ml, Lavender And Strawberry Variant/24 Pcs Hot Oil: Keratin Organic Hot Oil, 1000ml, Aloe Vera Variant/24 Pcs Hair Cellophane: 500ml, Natural, Brown, Burgundy And Ash Blonde Variant/24 Pcs Hair Rebonding Set: 1000ml Hair Straightening And Hair Neutralizing (ion Perm)/24 Pc Hair Color Dye:100 Ml, 2pcs Each (black, Dark Brown, Medium Brown, Light Brown, Blonde, Light Blond, Lighter Blonde, Lightest Blonde, Dust)/24 Pcs Hair Color Developer: 100ml 2pcs Each 6%, 9%, 12% Oxidizer/24 Pcs Hair Bleaching Powder: 500g/24 Pcs Brazilian Blowout: 120ml, 3-in-1 Set (clarifying Shampoo, Brazilian Blowout, After Treatment Conditioner)/24 Pcs Hair Shear: Material: Stainless Steel, 1 Precision Scissor Approximately 6-7",1 Thinning Scissor Atleast 6", Accesories: Scissors Oil Atleast 5ml/34 Pcs Angle Grinder Cutting Disk: 10 Pcs. Per Set, Dimensions: Approx. 105mm (4") X 1.2mm (3/64"') X 16mm (5/8")/34 Pcs Crow Bar: At Least 36" Long,length Tolerance: +- 1/8, Material: Forged Steel Carbon/34 Pcs Claw Hammer: Round Head, Head Weight: At Least 16oz, Overall Weight: Approximately 17oz-23oz, Head Material: Forged Steel, Handle Material: Fiberglass Handle With Rubber Cushion, Overall Length: Approximately 12-14"/34 Pcs Hacksaw With Blade: Material: Aluminum Alloy Frame With Soft-grip Handle, At Least 12"-15" Long Including Handle, With Soft-grip Rubber Handle, Bi-metal, Blade Length: About 30cm, Width: 3cm/34 Pcs Meter Tape With Magnetic Hook: Blade Material: Nylon Coated Blade, Dimensions: 16ft (l) X 25mm (w)/34 Pcs Handsaw: Blade Length: About 15",blade Material: Carbon Steel, Handle Length: 5", Handle Material: Plastic/rubber, Color: Gray,8 Teeth Per Inch/34 Pcs Shovel: Round End, Tempered Steel Blade: 17-23 Cm, Blade Tip Width, 22-28cm Blade Tip Length, All Metal Handle, Overall Length: 100cm-115 Cm, Capacity: 350-400 Lbs/34 Pcs Shovel: Rectangular End, Tempered Steel Blade: 22-26 Cm, Blade Tip Width, 22-28cm Blade Tip Length, All Metal Handle, Overall Length: 100cm-115 Cm/34 Pcs Level Bar: Aluminum Frame, Length: At Least 24"/60cm, Aluminum Thickness: 1.5mm, Double Side Milles, 0.5mm/m Accurate Vials/34 Pcs Steel Float/plastering Trowel: Thickness: At Least 0.7 Mm, Surface Measurement, Length: 12", Width: 4", Mmaterial: High Carbon Steel With Wood Handle/34 Pcs Steel Square: Carpenter's Framing Square, Blade Width: 2" Scale: At Least 16" (l) X 24" (w), Material: Steel/34 Pcs Masonry Trowel: Length: At Least 12"long, Width: 6", Material: Flat Steel, With Wood Handle/34 Pcs Circular Saw: Voltage: 220-240v, Frequency: 50-60hz, Input Power: 1400w, No-load Speed: Atleast 4800rpm, Blade Diameter: 185mm, Cutting Capacity: 45degree: 44mm, 90 Degree: 65mm, Maximum Cutting Depth: Atleast 90°62mm, Weight: Maximum Of 5.2kg, Item Approximate Dimension: 15-17cm (h), 25-28cm (w), 30-35cm (l)/34 Pcs Masonry Square/metric Square: Material: Aluminum, Length: Approx. 24", Width: 16", 1/8 '' Thickness/34 Pcs Mason's Level: At Least 48'' Long, Aluminum Reinforced Frame, 60cm Only/34 Pcs Sledgehammer: Weight: At Least 3 Lbs With Fiberglass Handle, Forged Steel Round Head, Length: Approximately 25-27"/34 Pcs Concrete Chisel: Pointed Sharp End, Material: Forged Steel Chisel, With Rubberized Handle, Length: Approximately 10''/34 Pcs Putty Knife/paint Scraper Set (4pcs): Stainless Steel Blade With Rubberized Handle, Blade Width: 1", 2" And 3", Length Including Handle: Approximately 8-9"/34 Pcs Mason's Line: #18 Braided Nylon, 500 Ft/roll, Color Orange/34 Pcs Hammer Drill: Electric, 1980w 220v, Rated Frequency: 50/60hz, Load Speed: 0-3800rpm (revolutions Per Minute), Chuck: 13mm With Ergonomic Anti-slip Handle/34 Pcs Angle Grinder: Rated Input Power: 730w, Wheel Diameter: 4",rated Voltage: 220v, Frequency: 60hz, No Load Speed: 12,000 Rpm, Weight: Approximately 1.6kg, Grinding Spindle Thread: M10, Disc Diameter: 100mm X 1 X 16mm, Dimension: 298mm (l), 77mm (w), 102mm (h )/34 Pcs Wooden Float: Size: At Least 12x4", Has 5/8" Thick Rubber Pad, With Wooden Handle/4 Pcs Nail Tool Set: Material: Stainless Steel, Case: Leather, Package Size: Approximately 15-15.5cm (l) X 8cm (w) X 2cm (h), Inclusions: Cuticle Trimmer (95mm), Blackhead Needle And Loop Remover (83mm), Eyebrow Tweezer (86mm) Peeling Knife (90mm), Nail File (75mm), Ear Pick (78mm), Double Pick (75mm), Dead Skin Fork (86mm), Small Pedicure Plier (95mm), Acne Needle (83mm), Small Nail Clipper (62mm) Bevel Nail Clipper (61mm), Large Nail Clipper (82mm), Beauty Tip Scissor (89mm), Pusher/4 Pcs Cotton Balls: 300g (100 Pcs Large Cotton Balls)/4 Pcs Nail Polish: Volume: 15ml, With 24 Colors Inclusions: 14k Gold, 18k Gold, 24k Gold, African Plum, Baby Pink, Black Velvet, Carolina Peach, Cashmere, Emerald Shimmer, Golden Bronze, Italian Nude, Platinum Special, Pussy Red, Red Pearl, Sapphire Glow, Silver Platinum, Simply Red, Tahiti Brown, White Satin, White Rose, Platinum Silver, Touch Of Tan, Touch Of Beige, Colorless/4 Pcs Foot Spa Soaker: With Pumice Stone, Package Dimensions: Approximately 16.42" X 13.58" X 7.91", Weight: About 4.63 Pounds, Rated Power: 500 Watts, Rated Voltage: 110~120v, Rated Frequency: 50hz, Temperature Adjustable Range: 35℃ To 48℃/2 Pcs Astringent Foot Soaker: 128oz/2 Pcs Cooling Foot Soak: Product Dimensions: ‎approximately 6.5-7" X 2.38-2.50" X 9.259.50", Weight: Atleast 900g/2 Pcs Exfoliating Foot Scrub: Package Dimensions: Approximately‎ 7.05-7.50" X 2.32-3" X 1.97-2", Weight: Atleast 6oz/4 Pcs Foot File And Callus Remover: Material: Metal, Steel, Item Dimensions: Approx. 10-10.78" X 2.7" X 0.29", Item Weight: 3.2 Pounds/2 Pcs Foot Scrub/2 Pcs Manicurist Bag: Made Of Heavy Duty Nylon, Large Capacity: Enough Room To Hold Up To 42 Bottles Of 15ml Nail Polish, Size: Approx. 8-9" (l) X 6-7" (w) X 4-5" (h)/6 Pcs Microfiber Towel: 25x65cm, 135g, Microfiber,dark Colors/2 Pcs Alcohol: 70% Ethyl Alcohol With Moisturizer, 500ml/1 Pc Double Burner Gas Stove: Stainless Top And Front, Automatic Ignition ,reversible Trivet, Double Detachable Top Burner, Removable Drip Pan, Dimension: 730mm(l) X 395mm(w) X 105mm(h)/1 Pc Lpg Tank With Gas Regulator And Accessories: Capacity: 11kg Cylinder With Gauge And Safety Device, Safety Push Protection For Leakage, Gas Auto Safe Controller, Rubber Gasket, Steel Belted, About 1.8m Hose, With Clamp/2 Pcs Kawa: 19.5" Cast Iron With Double Handle Depth/height: 21cm (medium)/1 Pc Plastic Table: 4 Seaters, Square Type With Umbrella Hole At The Center, Table Dimension: 36" (length) X 36" (width) X 30" (height), Thickness: Approximately 1.5in To 2in, Color: Beige/1 Pc Monoblock Chairs: With Backrest, Seat 375mmxdepth 330mm, 2.25 Kg, Class B Plastic, Thickness: Approximately 1.5in, Color: Beige/1 Pc Peanut Grinding Machine: Electric, 220v, 300w, 50-60hz,material: High Quality Stainless Steel Body And Base, Color: Black, Dimension: Approx. Length: 43.5cm, Width: 23cm, Height: 13.5cm/1 Pc Hand Cobbler Shoe Repair Machine Dual Cotton Nylon Line Sewing Machine Manual Leather Machine Shoe Sewing Machine Color Silver: Product Dimensions 14.4"d X 20.5"w X 5.5"h, Material: Cast Iron Item Weight: 22 Pounds, Power Source: Crank/5 Pcs Wooden Handle Shoes Repairing Awl Shoe Sewing Tool Diy Craft Repair Hand Straight Hook Shoes Sewing Awl Type: Shoes Sewing Awl Material: Wood+metal, Features: Shoes Sewing Awl, Repair Hand , Crochet Needle Tool Dimension: 1: App.2x13.5x6cm/0.79x5.31x2.36in 2: App.2x13x5.5cm/0.79x5.12x2.17in 3: App.2x13x5.5cm/0.79x5.12x2.17in, Color: Wood Color + Silver/5 Pcs Upholstery Stitching Thread Black 100 Mtr. 1 Pc Upholstery Hand Stitching Tools For Belts, Saddles, Shoes, Fabric Household Use Handwork Sewing Leather Craft Shoes Repairing/5 Pcs Upholstery Stitching Thread Brown 100 Mtr 1 Pc Upholstery Hand Stitching Tools For Belts, Saddles, Shoes, Fabric Household Use Handwork Sewing Leather Craft Shoes Repairing/5 Pcs Upholstery Stitching Thread White 100 Mtr. 1 Pc Upholstery Hand Stitching Tools For Belts, Saddles, Shoes, Fabric Household Use Handwork Sewing Leather Craft Shoes Repairing/2 Pcs Angle Grinder Cutting Disk: 10 Pcs. Per Set, Dimensions: Approx. 105mm (4") X 1.2mm (3/64"') X 16mm (5/8")/2 Pcs Angle Grinder: Rated Input Power: 730w, Wheel Diameter: 4", Rated Voltage: 220v,frequency: 60hz, No Load Speed: 12,000 Rpm, Weight: Approximately 1.6kg, Grinding Spindle Thread: M10, Disc Diameter: 100mm X 1 X 16mm, Dimension: 298mm (l), 77mm (w), 102mm (h)/2 Pcs Chipping Hammer: Item Weight: ‎at Least 13.8 Ounces, Product Dimensions: ‎11" (l) X 1" (w) X 7.5" (h), Material: Genuine Leather Grip And Forged Steel/2 Pcs Heavy Duty Corded Drill: Rated Input Power: 750w, Chuck Capacity: Up To 13mm, Drill Capacity: Metal (16mm), Wood (25mm), Masonry (12mm), Dimension: 268mm (l) X 69mm (w) X 192mm (h), Weight W/out Cable: Approximately 1.6-1.8 Kg, Spindle Collar Diameter Of 43 Mm/2 Pcs Metal Drill Bit Set: Material: High Speed Steel, 19pcs Per Set(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm,7.5mm,8mm,8.5mm,9mm,9.5mm,10mm), Point Angle: 118degree C, Standards: Din 338, Bit Geometry: Standard Twist Bit/2 Pcs Mig Welding Pliers: Overall Length: Atleast 210mm, Material: High Carbon Steel, Handle Material: Thermoplastic Rubber/2 Pcs Needle File Set: (6 Pieces Hand Metal Files, Hardened Alloy, Strength Steel Set Includes Flat, Flat Warding, Square, Triangular, Round, And Half-round File), Color Black, Metal Type: Carbon Steel, Handle Material: Wood, Alloy Steel, Item Dimensions: Approximately 6.1" (l) X 3" (w) X 0.5" (h)/2 Pcs Portable Welding Machine: Input Voltage: 220-240, Frequency: 50-60hz, Output Current: 10-220a, Led Display, No-load Voltage: 85v, Max. Output Current: 220a, Diameter Of Electrode: 1.6-3.2mm, Inclusions: 1 Pc Electrode Holder, 1 Pc Earth Clamp With Cable/2 Pcs Speed Square: Material: Cast Aluminum, Size: About 18x18x2cm/7.09x7.09x0.79", Weight: About 130g,triangle-shaped/2 Pcs Welding Helmet: Auto Darkening Helmet: Power Supply: Battery And Solar Powered, Light Shade: Din9-1, Dark Shade: Din4, Switching Time: 1/25000s, Delay Time: 0.1-0.8s, Sensitivity Adjustment: Stepless Control, Operation Temperature: -5 Degrees- 55 Degrees, Active Viewing Area: 93mmx43mm, Active Viewing Area Size: (+/- 10mm), Item Weight: At Least 1.85 Pounds, Package Dimensions: ‎approximately 12-12.4" (l) X 9-9.61" (w) X 7-7.68" (h)/2 Pcs Welding Magnets: 6 Pcs/set, Overall Length: At Least (3"), Hold Capacity: Up To 25lbs, Arrow Design Supports Angle: 45°, 90°, And 135°, Item Weight: 295g, Package Dimensions: ‎4.88 X 4.72 X 3.98 Inches, ‎material: Steel, Magnets Size: Approximately - Top (1-1.4cm), Bottom (6.5-7cm), Side (7-7.5cm) Thickness (1-1.3cm)/2 Pcs Welding Suit: 100% Cotton With Pyrovatex, 2 Back Pockets And Rule Pocket With Safety Gusset Feature, High Quality And Long Lasting, Two Way Zipper, Approximate Cloth Size: Large/10 Pcs Camping Dome Tent: Product Dimensions: 82.7"l X 55"w X 43.5"h, Item Weight: 4 Pounds Shape: D Shape Occupancy: 2 Person Included Components: Carry Bag, Stakes, Rainfly Water Resistance Technology 1000 Millimeters, Special Feature: Windproof, Sun Protection/outdoor Mat (banig):size (48" X 75") Material: Palm Leaves (buri)/10 Pcs Double Burner Gas Stove: Stainless Top And Front, Automatic Ignition ,reversible Trivet, Double Detachable Top Burner, Removable Drip Pan, Dimension: 730mm(l) X 395mm(w) X 105mm(h)/2 Unit Lpg Tank With Gas Regulator And Accessories: Capacity: 11kg Cylinder With Gauge And Safety Device, Safety Push Protection For Leakage, Gas Auto Safe Controller, Rubber Gasket, Steel Belted, About 1.8m Hose, With Clamp/1 Unit Gas Range: Approx. 55-70cm (l) X 50-60cm (w) X 86-93cm (h), 4-gas Burner, 62l Gas Oven, Button Ignition, Top Glass Lid, Net Weight: Maximum Of 28kg, Pan Support: Light Cast Iron Pan Support/5 Pcs Kawali: Aluminum, (diameter X Height) 28cmx8cm With Double Handle/2 Pc S Kawa: 19.5" Cast Iron With Double Handle Depth/height: 21cm (medium)/5 Pcs Wok Ladle: Material: Stainless Steel With Wooden Handle: Total Length Of Item: 24 Inches/5 Pcs Wok Spatula: Material: Stainless Steel With Wooden Handle, Total Length Of Item:24 Inches/5 Pcs Stainless Steel Long Wooden Handle Skimmer Strainer: Material: Stainless Steel, Size: 32.3*11.5cm/5 Pcs Casserole With Double Handle: Material: Aluminum, Size: 26cm, Dimension: 36(l) X 28.5(w) X 21(h)cm/5 Pcs Frying Tongs: Materials: Stainless Steel With Rubber Or Plastic Coated Handles, 12 Inch Long/5 Pcs Chopping Board: Material: Polypropylene Plastic: 8"(w) X 10"(l), 1cm (thickness)/5 Pcs Chopping Knife: 10" Stainless; Wood Handle/5 Pcs Grill/ Ihawan With Stand, Material Of Body And Stand: Stainless, 24x12x33inches (lxwxh), Depth: 5inches/1 Unit Heavy Duty Commercial Micromatic Big 7.8l Mrc-50 Rice Cooker 45cups (white)/10 Dz Melamine Round Dinner Plate: 9" Diameter, Color; White/10dz Platito (saucer): Material: Melamine Plastic, Standard Size: 6 Inch (diameter) X ¾ Inch Height/10 Pcs Serving Tray Bamboo - Wooden Tray With Handles, Color Brown Material Wood, Product Dimensions 17"l X 11"w X 2"h/10dz Drinking Glass: 8 Oz, Glass, Product Size: Base Diameter-7cm, Top Diameter: 7cm, H-11.4cm, Heat Resistant, Dishwasher Safe/10dz Spoon: Stainless, 12pcs/per Pack, Size: 8"/10dz Fork: Stainless, 12 Pcs/per Pack, Size 8"/5dz Mangkok (round Shape Bowl), Materials: Ceramic, Size: 6inch (diameter) X 5cm (height)/5 Pcs Storage Box With Wheels For Easy Transport, Measurements: L72 X W52 X H44cm, Food Grade Material, 120l Capacity, Stackable; With Lid And Handle, Color: White/2 Pcs Butcher's Knife: Materials: Stainless, Wood Handle, Size: About 10"/5 Pcs Gallon Acrylic Juice Dispenser Type: Type: Water/juice Dispensers, Overall Dimensions: Height:32 1/2 Inches, Top Diameter: 6 11/16 Inches, Capacity:1.1 Gallons, Base Material: Stainless Steel, Container Material: Acrylic, Style: Single/5 Pcs Chafing Dish Food Warmer Buffet Set: Size: 1/1pan*3, Color: Silver, Material: Stainless Steel, Product Dimensions: 13.39"l X 15.35"w X 23.62"h, Capacity: 8 Quarts/5 Pcs Chest Cooler: Item Package Dimensions: ‎25.8" (l) X 16.2" (w) X 15.7" (h), Package Weight: ‎5.76kg, Inside Dimensions: 24.95" (l) X 14.58" (w) X 14.77" (h), Material: ‎plastic, Chamber Depth: 24.95", Capacity: 52l , Color: Blue Or Red/5 Pcs Matress: Size: Semi Double (48" X 75"), Thickness: 4"/15 Pcs Matress Size: Queen (60" X 75") Thickness: 4"/15 Pcs Pillow: Size: Standard (20" X 26")/10 Sets Bed Linen Set Of 3pcs, 1-bed Sheet Size (48" X 75"), 2-pillow Case (20" X 26")/2 Sets Bed Linen Set Of 3pcs: 1-bed Sheet Size (60" X 75"), 2-pillow Case (20" X 26")/6 Unit Electric Fan: Color: Black, Electric Fan Design: Floor Fan, Power Source: Corded Electric Style: 3-speed Ac Motor Fan, Product Dimensions: 15.75"d X 17.72"w X 53.15"h, Room Type: Bedroom, Special Feature: Oscillating, Adjustable Height, Adjustable Tilt,wattage: 60 Watt/4 Unit Industrial Ceiling Fan: Product Material: Cast Aluminum Casing, Product Specifications: 2000mm, Operating Voltage: 220v, Wind Speed: 5th Gear, Number Of Fan Product Color: Black, White, Product Power: 165w, Blades: 6 Blades/150 Pcs Monoblock Chairs: With Backrest, Seat 375mmxdepth 330mm, 2.25 Kg, Class B Plastic, Thickness: Approximately 1.5in, Color: White/15 Pcs Solid Top Round Table: Material: Plastic, Color: White, Size(cm): 115 X 74 X 4.5, Foldable Legs,diameter: 45″, 6 To 8 Seater Capacity B. Completed Within The Last Two(2) Years From The Date Of The Submission Of Bids 7.1 Not Applicable Since Sub-contracting Is Not Allowed. 12 The Price Of Goods Shall Be Quoted Ddp Lgu-irosin, Irosin, Sorsogon. 14.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration Or Any Of The Following Forms And Amounts: A. [two Percent (2%) Of Abc], If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; B. [five Percent (5%) Of Abc] If Bid Security Is In Surety Bond. 19.3 Various Supplies And Materials For Dole Integrated Livelihood Program And Sustainable Industry Project 4 Pcs Barber Brush: 23.3cmx7cm, Soft Fiber Material And Wooden Handle/4 Pcs Hair Clipper: Electric, 110v-240v, 50-60hz,all Metal Machine,led Light Display Stainless Steel Blade, Blade Width 45mm,low Noise High Power, 2000 Ma Lithium Battery, 210 Minutes Working Time,4pcs Comb Guide 3/6/10/13mm,body Size: 17x4cm, Body Weight: 371g,with Complete Accessories - Fiber Comb, Cleaning Brush, Lubricant, Charger/4 Pcs Paddle Brush:body Material: Wood, Dimensions: (lxwxh) 25x8x3cm, Brown/8pcs Spray Bottle: 250ml Plastic Hairdressing Spray Bottle/4pcs Hair Blower: 4000w Accurate Power,2-speed Settings (high & Low), 3 Temperature (cold, Hot & Hotter), Glossy, Thick Long Wires, With Light And Perfume Button/4pcs Hair Blower: 4000w Accurate Power,2-speed Settings (high & Low), 3 Temperature (cold, Hot & Hotter), Glossy, Thick Long Wires,with Light And Perfume Button/4pcs Trolley With Blower Holder: 5-layered Wheeled Trolley Cart, Height: 35"/89cm,length: 20.9"/52cm,width: 14"/36cm,4 Drawers, Blower Holder/4pcs Talcum Powder: 200g, Hypo-allergenic, Dermatologist Tested/4 Pcs Cordless Clipper: Body Material: Aluminum,motor: Rotary,power/source Battery: Lithium-ion Battery (90+ Minutes Of Runtime), Blades: Titanium Blades, 3 Guide Combs Plastic Material (#1/2, #1, And #1½),cutting Lengths: 0.4-25mm,inclusions: A Blade Guard, 1 Recharging Transformer (charger), 1 Cleaning Brush, With Lubricating Oil Of At Least 5 Ml And English User Manual,product Dimension: Approximately 6.5-7" (l) X 2-3" (w),weight: Maximum Of 400g, Input: Can Be Used For 110-240 Voltage/4pcs Hair Trimmer: Running Time 120 Minutes Battery Powered, Rechargeable Li-ion Battery 1500 Mah, Dimension: Approximately 6-7" (l) X 1.5-2.5 (w), Material: Stainless,accessories: 4 Plastic Combs In Different Sizes 3mm, 6mm, 9mm, 12mm, Inclusions: 1 Recharging Transformer (charger) And 1 English User Manual, Input: Can Be Used For 110-240 Voltage/4pcs Electric Shaver: With 3d Floating Cutter Head, 40mins. Running Time For 8hrs Fully Charged, Material: Stainless Steel,product Dimension: Approximately 6.5-7" (l) X 2-3" (w),automatic Voltage 100-240v,battery: 2 Cell Nickel-metal Hydride Cylindrical Battery Pack, 4000mah,power Type: Rechargeable/4pcs Hair Shear: Material: Stainless Steel,1 Precision Scissor Approximately 6-7",1 Thinning Scissor Atleast 6",accesories: Scissors Oil Atleast 5ml/4 Pcs Razor Blades: 10pcs/box (double Edge Stainless)/4 Pcs Shaving Razor/labaha: Dimensions: Approximately 5-6" (l) X 3/4-1" (w), Material: Carbon Steel, Color: Black/ 4 Pcs Barber Skin Fade Brush: Handle: Wood, With Soft Bristles 1" (l),dimensions: Atleast 5.5" (l) X 1" (w)/4pcs Comb Set: (4pcs/set), Material: High Quality Plastic, Inclusions: #1-approx. Size: 4.88" (l) X 1.02" (w), #2-approx. Size: 7.09" (l) X 1.46" (w), #3-approx. Size: 7.87" (l) X 1.18" (w), #4-6.10" (l) X 0.20" (w)/4pcs Shaving Gel: (foam), 195g/4pcs Barber's Cape: Color: Black,about 140cm (l) X 110cm (w), Cloth: Polyester/4pcs 360 Degree Swivel Barber Chair: Classic Back Seat With Chrome Steel Base, Premium Steel Frame And High Class Foot Pump, Heavy Duty Leather Cover; Lower Height - At Least 51cm, Top Height - At Least 61cm, Sandles Height - At Least 40cm/8pcs Barber Apron: With Two Pockets, Waterproof, Material: Cotton And Acrylic, Item Size: Approx. 38-38.19" (l) X 27-27.36" (w)/ 4pcs Pomade: 80g, Water-based/26pcs Speed Square: Material: Cast Aluminum, Size: About 18x18x2cm/7.09x7.09x0.79", Weight: About 130g, Triangle-shaped/26pcs Meter Tape With Magnetic Hook: Blade Material, Nylon Coated Blade,dimensions: 16ft (l) X 25mm (w)/26pcs Circular Saw: Voltage: 220-240v, Frequency: 50-60hz, Input Power: 1400w, No-load Speed: Atleast 4800rpm, Blade Diameter: 185mm, Cutting Capacity: 45degree,44mm, 90 Degree: 65mm,maximum Cutting Depth: Atleast 90°62mm, Weight: Maximum Of 5.2kg,item Approximate Dimension: 15-17cm (h), 25-28cm (w), 30-35cm (l)/26pcs Angle Grinder: Rated Input Power: 730w, Wheel Diameter: 4", Rated Voltage: 220v,frequency: 60hz, No Load Speed: 12,000 Rpm, Weight: Approximately 1.6kg, Grinding Spindle Thread: M10, Disc Diameter: 100mm X 1 X 16mm, Dimension: 298mm (l), 77mm (w), 102mm (h )/26pcs Angle Grinder Cutting Disk: 10 Pcs. Per Set, Dimensions: Approx. 105mm (4") X 1.2mm (3/64"') X 16mm (5/8")/26 Pcs Portable Hand Drill: Power Sourced: Battery Powered - 2pc 21 Volt 1500mah Lithium-ion Batteries, Maximum Rotational Speed: 1500 Rpm, Voltage: 210v,amperage: 1.5 Amps, Chuck Size: 0.38",bit Heads Diameters: From 0.8mm-10mm,product Dimensions: ‎9.6" (l) X 2.1" (w) X 7.5" (h), Material: ‎plastic, Rubber, Metal, Item Dimensions: Approx. ‎9.6" (l) X 2.1" (w) X 7.5" (h),item Weight: Atleast ‎2.5 Pounds,item Torque: 330 Inch Pounds; Inclusions: 1x21 Volt Inspiritech Cordless Power Drill, 2x Rechargeable Battery, 1x English User Manual, 10x Self-drilling Drywall Anchors,10x Screwdriver Bits, 2x Double Ended Bits, 3x Drilling Bits, 1x Magnetic Extension Socket Bit Holder, 10x Anchors With Screws,1x One-hour Fast Charger, 1x Flexible Extension Shaft, 1x Carrying Bag/26pcs Wood Planer: Rated Voltage: 220v, Rated Input Power: 600w, Cutting Width: 82mm, Load Speed: 15,000rpm, Frequency: 60hz, Weight: 3kg./26 Pcs Framing Hammer: Handle Material: Alloy Steel, Item Dimensions: Approximately 16-17" (l) X 5.75-6" (w) X 1.5-2" (h), Item Weight: Atleast 1.4 Pounds/26 Pcs Trim Hammer: Handle Material: Wood, Head Material: Alloy Steel; Item Dimensions Approximately: 14-15" (l) X 5-6"(w) X 1-2" (h),item Weight: Atleast 594 Grams/26pcs Roofing Hammer: Item Weight: ‎1.25 Pounds, Product Dimensions: Approx. 13.7" (l) X 6.75" (w) X 1.5" (h)/26 Pcs Chalk Line: Item Weight: 10.6 Ounces, Product Dimensions: ‎approx. 1200" (l) X 4.72" (w) X 5.91" (h) Inches, Color: ‎blue, Material Type: Alloy Steel, Rubber/26 Pcs Utility Knife: Handle Material: Aluminum, Material: Aluminum Alloy, Weight: 120g/pcs, Blade Size: 19mm (w) X 61mm (h) X 0.6mm (t),blade Material: Steel, Thickness: Atleast 0.6mm/26 Pcs Tin Snips: Item Weight: ‎atleast 1 Pound, Package Dimensions: Approx. 12.36" (l) X 3.7" (w) X 1.3" (h),size: ‎long Straight, 12 Inches Long, Blade Length: 3.20",material: Steel, Cutting Thickness Range Up To 1.2mm Carbon Steel And 0.7mm/26 Pcs Framing Square: Shorter Leg Measures At 8 Inch Outside And 6.5 Inch Inside, Longer Leg Measures At 12 Inch Outside And 11 Inch Inside,material: Carbon Steel/26 Pcs Level: Box Beam Style, Material: Aluminum,dimension: Approximately 24-24.5" (l) X 2-2.6" (w) X 1.2-1.5" (h), Weight: Atleast 0.8 Pounds/26 Pcs Electric Planer: Voltage: 220-240v,input Power: 1050w, No Load Speed: 1600rpm, Planing Width And Depth,82x3mm,heavy Duty Aluminum Base/1 Pc Meter Tape With Magnetic Hook: Blade Material: Nylon Coated Blade, Dimensions: 16ft (l) X 25mm (w)/1 Pc Air Compressor Machine: Motor Power: 1hp, Size: Approx. 935x385x800mm,voltage: 220-240v, 60hz, Speed: 3400 Rpm, Tank Capacity: 24l , Operating Pressure: Max 8 Bar, Air Displacement: 93l/min, Pump Lubricated With Oil/1 Pc Blue Painters Tape, Color: Blue, Size: Atleast 1.41" X 20m,thickness: 0.13mm, Item Weight: 1.92 Pounds, Material: Paper/2pcs Electric Spray Gun: Voltage: 220-240v~50/60hz,spraying Pressure: 0.1-0.2 Bar, Max Flow: 850ml/min, Max Viscosity: 50din-s, Container Capacity: Atleast 800ml,power Cord Length: 2m, Rated Power 500w, Spraying Pressure: Atleast 0.1-0.2bar, Item Dimensions: Approximately 13" (l) X 5" (w) X 11" (h)/1 Pc Extension Pole, (3 Stage Extender) Reach: 1.5-to-3ft,weight: Maximum Of 0.5 Pounds, Max. Standing Reach: 10ft, Material : Aluminum/2 Pcs Paint Brush Set, 5 Pcs/set, Material: Synthetic Bristle, Wood Handle, Overall Length: Atleast 11", Bristles Length: Atleast 3", Brush Width: 1", 1-1/2" 2", 2-2.5", 3"and 4"/ 5 Pcs Paint Roller, Material: Plastic,package Dimensions: Approximately 15.16" (l) X 11.22" (w) X 3.15" (h),item Weight: Atleast 1.06 Pounds, Inclusion: Roller, Atleast 7" In Length, Material: Polyester/2 Pcs Painters Gloves, 12 Pcs/pack, Material: Cotton, Color: Red/1 Pc Putty Knife/paint Scraper Set (4pcs), Stainless Steel Blade With Rubberized Handle, Blade Width: 1", 2" And 3", Length Including Handle: Approximately 8-9"/1 Pc Steel Float/plastering Trowel: Thickness: Atleast 0.7 Mm, Surface Measurement, Length: 12", Width: 4", Material: High Carbon Steel With Wood Handle/2 Pcs Lpg Tank With Gas Regulator And Accessories, Capacity: 11kg Cylinder With Gauge And Safety Device, Safety Push Protection For Leakage, Gas Auto Safe Controller, Rubber Gasket, Steel Belted, About 1.8m Hose, With Clamp/2 Pcs Kawali: Aluminum, (diameter X Height) 28cmx8cm With Double Handle/2 Pcs Food Warmer/chafing Dish: Rectangular, 2l Capacity, 6 Pcs In 1 Set Stainless Steel, No Side Handle, Glass Lid Cover With Handle, Dimensions: Same Sizes - 32cm (l) X 26cm (w) X 8cm (h)/2 Pcs Gas Range: Approx. 55-70cm (l) X 50-60cm (w) X 86-93cm (h), 4-gas Burner, 62l Gas Oven, Button Ignition, Top Glass Lid, Net Weight: Maximum Of 28kg, Pan Support: Light Cast Iron Pan Support/2 Pcs Baking Sheet: Aluminum, 12x16 Inches/2 Pcs Digital Kitchen Scale: Accurate Measurement; Weigh Up To 5 Kg / 11 Lb Precisely In 1 G / 0.05 Oz Increments, Quality Material: Measure Food, Small Items, And Liquids With Confidence On The 304 Food-grade, Stainless Steel Platform, Approx. Dimension 7.3-7.5" (l) X 5.7-5.90" (w) X 0.6-08" (h), 2 X 1.5v Aaa Batteries/2 Pcs Measuring Cup (for Liquid Ingredients): 1 Measuring Cup With Red Graphics, Made Of Non-porous Glass That Won't Warp, Stain, Or Absorb Odors, Glass Is Preheated Oven, Microwave, Fridge, Freezer & Dishwasher Safe, Dimension: Approx. 7.13" (l) X 6.75" (w) X 4.38" (h), Measuring Capacity: 500ml/2 Pcs Measuring Cups (for Dry Ingredients): Material: Stainless Steel, 5 Pieces Per Set (1 Cup, 1/2 Cup, 1/3 Cup, 1/4 Cup, 1/8 Cup)/2 Pcs Measuring Spoons (set): 7pcs Stainless Measuring Spoon Kit, The Kit Includes: 1/8 Tsp (0.63ml), 1/4 Tsp (1.25ml), 1/2 Tsp (2.5ml), 3/4 Tsp (3.75ml), 1 Tsp (5ml), 1/2 Tbsp (7.5ml), 1 Tbsp (15ml)/2 Pcs Mixing Bowl: Medium, Approx. Diameter: 28cm, Height:11.2cm, Material: Stainless; Capacity: At Least 4l/2 Pcs Standmixer: 2-in-1 360 Automatic Rotating Bowl Electric Stand & Hand Mixer, 4.5l W/ 5-speed Turbo Function,color: Black/1 Pc Double Burner Gas Stove: Stainless Top And Front, Automatic Ignition ,reversible Trivet, Double Detachable Top Burner, Removable Drip Pan, Dimension: 730mm(l) X 395mm(w) X 105mm(h)/1 Pc Lpg Tank With Gas Regulator And Accessories: Capacity: 11kg Cylinder With Gauge And Safety Device, Safety Push Protection For Leakage, Gas Auto Safe Controller, Rubber Gasket, Steel Belted, About 1.8m Hose, With Clamp/1 Pc Caldero: Aluminum, #2, Diameter Height 28cmx16cm With Double Handle/2 Pcs Kawali: Aluminum, (diameter X Height) 28cmx8cm With Double Handle/1 Pc Kawa: 19.5" Cast Iron With Double Handle Depth/height: 21cm (medium)/1 Pc Food Warmer/chafing Dish: Rectangular, 2l Capacity, 6 Pcs In 1 Set Stainless Steel, No Side Handle, Glass Lid Cover With Handle, Dimensions: Same Sizes - 32cm (l) X 26cm (w) X 8cm (h)1 Pc Food Glass Display (estante): 3 Layers; 20(h)x18(w)x36(l)", Aluminum Base, Glass With Screen Door/1 Pc Casserole With Double Handle: Material: Aluminum, Size: 26cm Dimension: 36(l) X 28.5(w) X 21(h)cm/2 Pcs Frying Tongs: Materials: Stainless Steel With Rubber Or Plastic Coated Handles, 12 Inch Long/1 Pc Chopping Board: Material: Polypropylene/1 Pc Chopping Knife: 10” Stainless,wood Handle/1 Pc Butcher's Knife: Materials: Stainless, Wood Handle, Size: About 10"/1 Pc Plastic Table: 4 Seaters, Square Type With Umbrella Hole At The Center, Table Dimension: 36" (length) X 36" (width) X 30" (height), Thickness: Approximately 1.5in To 2in; Color: Beige2 Pcs Monoblock Chairs: With Backrest, Seat 375mmxdepth 330mm, 2.25 Kg, Class B Plastic, Thickness: Approximately 1.5in, Color: Beige/1 Pc Beach Umbrella: 90" Diameter X 8 Ft. Height, 8 Rib Round Metal Pole, Polyester Multi-coloured Umbrella Canopy/2 Pcs Cooler Container: Chest Insulated Cooler, Materials: Polystyrene, Sizes And Capacities: 30 Liters - 45.5cm(l) X 39cm(w) X 31cm(h),color: Blue Or Red/1 Pc Grill/ Ihawan With Stand,material Of Body And Stand: Stainless , 24x12x33inches (lxwxh), Depth: 5inches/2 Pcs Bicycle With Sidecar: Bicycle Specifications: Bmx Type Bike (frame 1//2 Gi Hd, Rim Set Front X 10 G Wide Jap Hub, Rim Set Rear X 10g Wide Jap Hub, Tire 20 X 2.125 Jumbo, Tube 20 X 2.125, Handle Bar Painted Black, Fork Ex-900 Landing Gear Cp, Head Parts Nikyo/whw, H-post Bmx Ord.m, H-grip Ord. Opc Parts Neco Bearing Type, Opc Plate 36t, Chain Cp Bmx, Freewheel 24t, Pedal Opc Bearing Type, Seat Clamp/s-pin/ S-post P, Saddle With Spring, Footbreak With Spring "full Size" Frame, 175-180mm Cranks Side Car With Umbrella Holder And 2 Chest Coolers Carrier (52l Capacity) - Dimensions: ‎25.8" (l) X 16.2" (w) X 15.7" (h) Materials: 1/2 J1 Pipe 540, 316 X 1 Flat Square Bar, J1 Pipe De Una 520, 1/4 X 2 Flat Bar, 6203 Gi Set, Tire 20 X 2.125 Jumbo/2 Pcs Weighing Scale: 10kg Capacity, Colored Body / Stainless Pan, Graduation: 50g, Powder Coated Body, Pan Size: 255mm Ø X 55mm Deep, Dial Face: 185mm Ø, 4 Units/master Carton/4 Pcs Plastic Fruit Crate 21 X 15 X 12 Inches/1 Pc Hair Dryer, With 3 Temperature Setting (from High To Low): Size: Atleast 200mm (h), 74mm (w), Weight: Minimum Of 315g, Wattage: 2200w, Voltage: 120-240v, Body Material: Plastic/1 Pc 2 In 1 Steam Pro Hair Straightener (straightener & Curler): Tourmaline Ceramic Wide Plates - 1.25" Wide Heating Plate, Adjustable Temperature Display - 150-235◦c, 360◦, Swivel Cord - Tangle-free, Hanger Design, Ptc Heater - Instant Heat-up/1 Pc Hair Combs: Material: Plastic, Inclusions: Flat Comb Size - 21.5cm (l) X 4.2cm (w), Massage Comb Size: 22cm (l) X 8.5cm (w), Ribs Comb Size: 21.5cm (l) X 4cm (w), Curling Comb Size: 20.2cm (l) X 2.5cm (w), Mirror Size: Atleast 22cm (l) X 10cm (w); Storage Base Size: Atleast 10cm (l) X 15cm (w), Package Size: Approx. 22-23cm (l) X 16cm (w) X 11cm (h), Package Weight: Approx. 305g/1 Pc Hair Clips: Plastic, Product Size: Approx. 4.5", Color: Black (12pcs)/1 Pc 7pcs Face Brush Set, Inclusion: Powder Brush, Size: 17cm, Bristle Length: 3.2cm, Ferrule Width:1.9cm, Powder Buffer Brush, Size: 19cm, Bristle Length: 5cm, Ferrule Width: 2.1cm,foundation Brush, Size: 17cm, Bristle Length: 3.3cm, Ferrule Width: 2.2cm, Flat Foundation Brush, Size: 17cm,bristle Length: 3.2cm; Ferrule Width:1.2cm, Highlight Brush, Size: 16.5cm,bristle Length: 2.7cm, Ferrule Width: 2.3cm,angle Cheek Brush, Size: 17cm, Bristle Length: 3.1-2.3cm,ferrule Width: 2.4cm, Highlighting Fan Brush, Size: 16.5cm, Bristle Length: 4cm, Ferrule Width: 2.5cm, With Brush Bag/1 Pc Eyelash Curler: Material: Carbon Steel, Size: Approx. 5.91 X 3.94 X 1.97"/1 Pc Eyebrow Razor: Handle Material: Plastic, Size: Approx. 6.8(l) X 2(w) X 0.1"(h), 6pcs/pack/1 Pc Makeup Sponge Set Blender: Material: Sponge, Size: Approx. 4.02 (l) X 3.94(w) X 2.52"(h), 4pcs/set/1 Pc False Eyelashes, Product Dimensions: ‎ Approx. 0.75(l) X 3.88(w) X 5.38"(h), 5pairs/pack/1 Pc Eye Shadow Pallete: 12 Curated Peach-inspired Shades, Finish Type: Metallic, Matte, Product Dimension: Approx. 0.08 (l) X 0.04 (w) X 0.06" (h)/1 Pc Contour Palette: Multi-colored, Finish Type: Matte, Package Dimension: Approx. 5.75 (l) X 4.25 (w) X 0.5" (h)/1 Pc Hypercurl Waterproof Mascara Make Up Set: Product Dimensions: Approx. ‎0.85 (l) X 2.75 (w) X 5.63" (h), Color: Black/1 Pc Waterproof Matte Gel Eyeliner Pencil: Item Form: Pencil, Powder, Creamy, Finish Type: Matte, Product Dimensions: About‎ 5.77 X 1.97 X 0.81", Color: Black/1 Pc Eyebrow Gel, Waterproof: Weight: About 0.16 Oz, Product Dimension: Approx. 0.75 (l) X 1.9 (w) X 5.65 (h) Inches, Color Black, Brown/1 Pc Blush On, 3 Complimentary Skin-flushed Shades, Product Dimensions: Approx. 2.89 (l) X 0.43 (w) X 2.33" (h)/1 Pc Powder Blush Makeup Palette, Product Dimensions: ‎approx. 2.43 (l) X 2.43 (w) X 0.66" (h)/1 Pc Eye Shadow Palette; 12 Curated Peach-inspired Shades, Finished Type:metallic,matte, Product Dimensions:approx 0.08(l)x0.04(w) X0.06”(h)/ 1 Pc Applicator Brush And Plastic Comb: 13cm Black, Double-sided Comb, Pointed Handle For Sectioning Hair/1 Pc Hair Clipper: Electric; 110v-240v, 50-60hz,all Metal Machine, Led Light Display Stainless Steel Blade, Blade Width 45mm,low Noise High Power, 2000 Ma Lithium Battery, 210 Minutes Working Time, 4pcs Comb Guide 3/6/10/13mm, Body Size: 17x4cm, Body Weight: 371g, With Complete Accessories - Fiber Comb: Cleaning Brush, Lubricant, Charger/1 Pc Spray Bottle: 250ml Plastic Hairdressing Spray Bottle/1 Pc Trolley With Blower Holder: 5-layered Wheeled Trolley Cart, Height: 35"/89cm, Length: 20.9"/52cm, Width: 14"/36cm, 4 Drawers, Blower Holder/1 Pc Curling Iron: 220v Power, 4gen; White, 32x25x13mm, Energy Efficient-48w,360degree Rotating Tail, Automatic Hair Curler, Iron Ceramic, Adjustable Size/1 Pc Apron: Length: 76cm, Width: 59cm, Color: Black, Material: Nylon, Waterproof/1 Pc Curling Rod: Small, 2cm, Cylindrical, Plastic Resin With Rubber Band Kits,multi-color/1 Pc Curling Rod: Medium, 2.5cm, Cylindrical, Plastic Resin With Rubber Band Kits, Multi-color/1 Pc Curling Rod: Large, 3cm, Cylindrical, Plastic Resin With Rubber Band Kits, Multi-color/1 Pc Spray Net: 600ml, 27.5cm, Hard Hold/1 Pc Hair Spray Aerosol Extra Hold: Weight: About 7ounces /198g, Scented, Package Dimensions: ‎7.83 X 6.69 X 2.17"/1 Pc Hair Trimmer: Running Time 120 Minutes Battery Powered,rechargeable Li-ion Battery 1500 Mah, Dimension: Approximately 6-7" (l) X 1.5-2.5 (w), Material: Stainless; Accessories: 4 Plastic Combs In Different Sizes 3mm, 6mm, 9mm, 12mm, Inclusions: 1 Recharging Transformer (charger), And 1 English User Manual, Input: Can Be Used For 110-240 Voltage/3 Pcs Hair Dryer, With 3 Temperature Setting (from High To Low): Size: Atleast 200mm (h), 74mm (w), Weight: Minimum Of 315g, Wattage: 2200w, Voltage: 120-240v,body Material: Plastic/3 Pcs 2 In 1 Steam Pro Hair Straightener (straightener & Curler): Tourmaline Ceramic Wide Plates - 1.25" Wide Heating Plate, Adjustable Temperature Display - 150-235◦c, 360◦, Swivel Cord - Tangle-free; Hanger Design, Ptc Heater - Instant Heat-up/3 Pcs Hair Combs: Material: Plastic, Inclusions: Flat Comb Size - 21.5cm (l) X 4.2cm (w), Massage Comb Size: 22cm (l) X 8.5cm (w), Ribs Comb Size: 21.5cm (l) X 4cm (w),curling Comb Size: 20.2cm (l) X 2.5cm (w), Mirror Size: Atleast 22cm (l) X 10cm (w), Storage Base Size: Atleast 10cm (l) X 15cm (w),package Size: Approx. 22-23cm (l) X 16cm (w) X 11cm (h), Package Weight: Approx. 305g/3 Pcs Hair Clips: Plastic, Product Size: Approx. 4.5",color: Black (12pcs)/3 Pcs Disposable Latex Free Gloves: Non-sterile, 100 Pcs Per Pack, Product Dimensions: Approx.‎ 8.6" (l) X 4.9" (w) X 3" (h), Weight: 1.25 Pounds, Material: Synthetic Pvc/3 Pcs Cutting Scissors: 6" Stainless Steel, 65g/3 Pcs Thinning Scissors: 17.5x5cm Stainless Steel/3 Pcs Drip Pan: 32cmx35cm Plastic, Black/3 Pcs Hair Clipper: Electric,110v-240v, 50-60hz,all Metal Machine,led Light Display Stainless Steel Blade, Blade Width 45mm, Low Noise High Power, 2000 Ma Lithium Battery, 210 Minutes Working Time, 4pcs Comb Guide 3/6/10/13mm, Body Size: 17x4cm, Body Weight: 371g,with Complete Accessories - Fiber Comb, Cleaning Brush, Lubricant, Charger/3 Pcs Nail Tool Set: Material: Stainless Steel, Case: Leather, Package Size: Approximately 15-15.5cm (l) X 8cm (w) X 2cm (h),inclusions: Cuticle Trimmer (95mm), Blackhead Needle And Loop Remover (83mm), Eyebrow Tweezer (86mm) Peeling Knife (90mm), Nail File (75mm), Ear Pick (78mm), Double Pick (75mm), Dead Skin Fork (86mm), Small Pedicure Plier (95mm), Acne Needle (83mm), Small Nail Clipper (62mm) Bevel Nail Clipper (61mm), Large Nail Clipper (82mm), Beauty Tip Scissor (89mm), Pusher/3 Pcs Cotton Balls: 300g (100 Pcs Large Cotton Balls)/3 Pcs Nail Polish: Volume: 15ml, With 24 Colors Inclusions: 14k Gold, 18k Gold, 24k Gold, African Plum, Baby Pink, Black Velvet, Carolina Peach, Cashmere, Emerald Shimmer, Golden Bronze, Italian Nude, Platinum Special, Pussy Red, Red Pearl, Saphire Glow, Silver Platinum, Simply Red, Tahiti Brown, White Satin, White Rose, Platinum Silver, Touch Of Tan, Touch Of Beige, Colorless/3 Pcs Foot Spa Soaker: With Pumice Stone, Package Dimensions: Approximately 16.42" X 13.58" X 7.91", Weight: About 4.63 Pounds, Rated Power: 500 Watts, Rated Voltage: 110~120v, Rated Frequency: 50hz, Temperature Adjustable Range: 35℃ To 48℃/3 Pcs Astringent Foot Soaker: 128oz/3 Pcs Cooling Foot Soak: Product Dimensions: ‎approximately 6.5-7" X 2.38-2.50" X 9.259.50", Weight: Atleast 900g/3 Pcs Exfoliating Foot Scrub: Package Dimensions: Approximately‎ 7.05-7.50" X 2.32-3" X 1.97-2", Weight: Atleast 6oz/3 Pcs Foot File And Callus Remover: Material: Metal, Steel, Item Dimensions: Approx. 10-10.78" X 2.7" X 0.29", Item Weight: 3.2 Pounds/3 Pcs Foot Scrub/3 Pcs Manicurist Bag: Made Of Heavy Duty Nylon, Large Capacity: Enough Room To Hold Up To 42 Bottles Of 15ml Nail Polish, Size: Approx. 8-9" (l) X 6-7" (w) X 4-5" (h)/3 Pcs Spray Bottle: 250ml Plastic Hairdressing Spray Bottle/3 Pcs Trolley With Blower Holder: 5-layered Wheeled Trolley Cart, Height: 35"/89cm, Length: 20.9"/52cm, Width: 14"/36cm, 4 Drawers, Blower Holder/3 Pcs Apron: Length: 76cm, Width: 59cm,color: Black,material: Nylon, Waterproof/3 Pcs Alcohol: 70% Ethyl Alcohol With Moisturizer,500ml/3 Pcs Shampoo: 1000ml, Green Apple And Citrus Lemon Variant/3 Pcs Hair Spa: 1000ml, Lavender And Strawberry Variant/3 Pcs Hot Oil: Keratin Organic Hot Oil, 1000ml, Aloe Vera Variant/3 Pcs Hair Cellophane: 500ml, Natural, Brown,burgundy And Ash Blonde Variant/3 Pcs Hair Rebonding Set: 1000ml Hair Straightening And Hair Neutralizing (ion Perm)/3 Pcs Hair Color Dye:100 Ml, 2pcs Each (black, Dark Brown, Medium Brown, Light Brown, Blonde, Light Blond, Lighter Blonde, Lightest Blonde, Dust)/3 Pcs Hair Color Developer: 100ml 2pcs Each 6%, 9%, 12% Oxidizer/3 Pcs Hair Bleaching Powder: 500g/3 Pcs Brazilian Blowout: 120ml, 3-in-1 Set (clarifying Shampoo, Brazilian Blowout, After Treatment Conditioner)/24 Pcs Hair Dryer, With 3 Temperature Setting (from High To Low): Size: Atleast 200mm (h), 74mm (w), Weight: Minimum Of 315g, Wattage: 2200w, Voltage: 120-240v, Body Material: Plastic/24 Pcs 2 In 1 Steam Pro Hair Straightener (straightener & Curler): Tourmaline Ceramic Wide Plates - 1.25" Wide Heating Plate, Adjustable Temperature Display - 150-235◦c, 360◦,swivel Cord - Tangle-free, Hanger Design, Ptc Heater - Instant Heat-up/24 Pcs Hair Combs: Material: Plastic, Inclusions: Flat Comb Size - 21.5cm (l) X 4.2cm (w), Massage Comb Size: 22cm (l) X 8.5cm (w), Ribs Comb Size: 21.5cm (l) X 4cm (w), Curling Comb Size: 20.2cm (l) X 2.5cm (w), Mirror Size: Atleast 22cm (l) X 10cm (w), Storage Base Size: Atleast 10cm (l) X 15cm (w), Package Size: Approx. 22-23cm (l) X 16cm (w) X 11cm (h), Package Weight: Approx. 305g/24 Pcs Hair Clips: Plastic, Product Size: Approx. 4.5", Color: Black (12pcs)/24 Pcs Disposable Latex Free Gloves: Non-sterile, 100 Pcs Per Pack, Product Dimensions: Approx.‎ 8.6" (l) X 4.9" (w) X 3" (h), Weight: 1.25 Pounds, Material: Synthetic Pvc/24 Pcs Drip Pan: 32cmx35cm Plastic, Black/24 Pcs Shower Caps: 32cm, Thick Plastic, Elastic, Washable/24 Pcs Trolley With Blower Holder: 5-layered Wheeled Trolley Cart, Height: 35"/89cm, Length: 20.9"/52cm, Width: 14"/36cm, 4 Drawers, Blower Holder/24 Pcs Curling Iron: 220v Power, 4gen, White, 32x25x13mm, Energy Efficient-48w, 360degree Rotating Tail, Automatic Hair Curler, Iron Ceramic, Adjustable Size/24 Pcs Hair Steamer: With 4 Wheels, 360degrees Movable, Gray Color, Adjustable Height With Timer And Control/120 Pcs Cape: 140x110cm, Satin, Nylon, Waterproof, Black/72 Pcs Microfiber Towel: 25x65cm, 135g, Microfiber, Dark Colors/24 Pcs Curling Rod:small, 2cm, Cylindrical, Plastic Resin With Rubber Band Kits, Multi-color/24 Pcs Curling Rod: Medium, 2.5cm, Cylindrical, Plastic Resin With Rubber Band Kits, Multi-color/24 Pcs Curling Rod: Large, 3cm, Cylindrical, Plastic Resin With Rubber Band Kits, Multi-color/120 Pcs Ear Caps: (l X W X T): 8cm X 4.5cm X 2.1cm/3.15" X 1.77" X 0.83", Black,plastic/24 Pcs Shampoo: 1000ml, Green Apple And Citrus Lemon Variant/24 Pcs Hair Spa: 1000ml, Lavender And Strawberry Variant/24 Pcs Hot Oil: Keratin Organic Hot Oil, 1000ml, Aloe Vera Variant/24 Pcs Hair Cellophane: 500ml, Natural, Brown, Burgundy And Ash Blonde Variant/24 Pcs Hair Rebonding Set: 1000ml Hair Straightening And Hair Neutralizing (ion Perm)/24 Pc Hair Color Dye:100 Ml, 2pcs Each (black, Dark Brown, Medium Brown, Light Brown, Blonde, Light Blond, Lighter Blonde, Lightest Blonde, Dust)/24 Pcs Hair Color Developer: 100ml 2pcs Each 6%, 9%, 12% Oxidizer/24 Pcs Hair Bleaching Powder: 500g/24 Pcs Brazilian Blowout: 120ml, 3-in-1 Set (clarifying Shampoo, Brazilian Blowout, After Treatment Conditioner)/24 Pcs Hair Shear: Material: Stainless Steel, 1 Precision Scissor Approximately 6-7",1 Thinning Scissor Atleast 6", Accesories: Scissors Oil Atleast 5ml/34 Pcs Angle Grinder Cutting Disk: 10 Pcs. Per Set, Dimensions: Approx. 105mm (4") X 1.2mm (3/64"') X 16mm (5/8")/34 Pcs Crow Bar: At Least 36" Long,length Tolerance: +- 1/8, Material: Forged Steel Carbon/34 Pcs Claw Hammer: Round Head, Head Weight: At Least 16oz, Overall Weight: Approximately 17oz-23oz, Head Material: Forged Steel, Handle Material: Fiberglass Handle With Rubber Cushion, Overall Length: Approximately 12-14"/34 Pcs Hacksaw With Blade: Material: Aluminum Alloy Frame With Soft-grip Handle, At Least 12"-15" Long Including Handle, With Soft-grip Rubber Handle, Bi-metal, Blade Length: About 30cm, Width: 3cm/34 Pcs Meter Tape With Magnetic Hook: Blade Material: Nylon Coated Blade, Dimensions: 16ft (l) X 25mm (w)/34 Pcs Handsaw: Blade Length: About 15",blade Material: Carbon Steel, Handle Length: 5", Handle Material: Plastic/rubber, Color: Gray,8 Teeth Per Inch/34 Pcs Shovel: Round End, Tempered Steel Blade: 17-23 Cm, Blade Tip Width, 22-28cm Blade Tip Length, All Metal Handle, Overall Length: 100cm-115 Cm, Capacity: 350-400 Lbs/34 Pcs Shovel: Rectangular End, Tempered Steel Blade: 22-26 Cm, Blade Tip Width, 22-28cm Blade Tip Length, All Metal Handle, Overall Length: 100cm-115 Cm/34 Pcs Level Bar: Aluminum Frame, Length: At Least 24"/60cm, Aluminum Thickness: 1.5mm, Double Side Milles, 0.5mm/m Accurate Vials/34 Pcs Steel Float/plastering Trowel: Thickness: At Least 0.7 Mm, Surface Measurement, Length: 12", Width: 4", Mmaterial: High Carbon Steel With Wood Handle/34 Pcs Steel Square: Carpenter's Framing Square, Blade Width: 2" Scale: At Least 16" (l) X 24" (w), Material: Steel/34 Pcs Masonry Trowel: Length: At Least 12"long, Width: 6", Material: Flat Steel, With Wood Handle/34 Pcs Circular Saw: Voltage: 220-240v, Frequency: 50-60hz, Input Power: 1400w, No-load Speed: Atleast 4800rpm, Blade Diameter: 185mm, Cutting Capacity: 45degree: 44mm, 90 Degree: 65mm, Maximum Cutting Depth: Atleast 90°62mm, Weight: Maximum Of 5.2kg, Item Approximate Dimension: 15-17cm (h), 25-28cm (w), 30-35cm (l)/34 Pcs Masonry Square/metric Square: Material: Aluminum, Length: Approx. 24", Width: 16", 1/8 '' Thickness/34 Pcs Mason's Level: At Least 48'' Long, Aluminum Reinforced Frame, 60cm Only/34 Pcs Sledgehammer: Weight: At Least 3 Lbs With Fiberglass Handle, Forged Steel Round Head, Length: Approximately 25-27"/34 Pcs Concrete Chisel: Pointed Sharp End, Material: Forged Steel Chisel, With Rubberized Handle, Length: Approximately 10''/34 Pcs Putty Knife/paint Scraper Set (4pcs): Stainless Steel Blade With Rubberized Handle, Blade Width: 1", 2" And 3", Length Including Handle: Approximately 8-9"/34 Pcs Mason's Line: #18 Braided Nylon, 500 Ft/roll, Color Orange/34 Pcs Hammer Drill: Electric, 1980w 220v, Rated Frequency: 50/60hz, Load Speed: 0-3800rpm (revolutions Per Minute), Chuck: 13mm With Ergonomic Anti-slip Handle/34 Pcs Angle Grinder: Rated Input Power: 730w, Wheel Diameter: 4",rated Voltage: 220v, Frequency: 60hz, No Load Speed: 12,000 Rpm, Weight: Approximately 1.6kg, Grinding Spindle Thread: M10, Disc Diameter: 100mm X 1 X 16mm, Dimension: 298mm (l), 77mm (w), 102mm (h )/34 Pcs Wooden Float: Size: At Least 12x4", Has 5/8" Thick Rubber Pad, With Wooden Handle/4 Pcs Nail Tool Set: Material: Stainless Steel, Case: Leather, Package Size: Approximately 15-15.5cm (l) X 8cm (w) X 2cm (h), Inclusions: Cuticle Trimmer (95mm), Blackhead Needle And Loop Remover (83mm), Eyebrow Tweezer (86mm) Peeling Knife (90mm), Nail File (75mm), Ear Pick (78mm), Double Pick (75mm), Dead Skin Fork (86mm), Small Pedicure Plier (95mm), Acne Needle (83mm), Small Nail Clipper (62mm) Bevel Nail Clipper (61mm), Large Nail Clipper (82mm), Beauty Tip Scissor (89mm), Pusher/4 Pcs Cotton Balls: 300g (100 Pcs Large Cotton Balls)/4 Pcs Nail Polish: Volume: 15ml, With 24 Colors Inclusions: 14k Gold, 18k Gold, 24k Gold, African Plum, Baby Pink, Black Velvet, Carolina Peach, Cashmere, Emerald Shimmer, Golden Bronze, Italian Nude, Platinum Special, Pussy Red, Red Pearl, Sapphire Glow, Silver Platinum, Simply Red, Tahiti Brown, White Satin, White Rose, Platinum Silver, Touch Of Tan, Touch Of Beige, Colorless/4 Pcs Foot Spa Soaker: With Pumice Stone, Package Dimensions: Approximately 16.42" X 13.58" X 7.91", Weight: About 4.63 Pounds, Rated Power: 500 Watts, Rated Voltage: 110~120v, Rated Frequency: 50hz, Temperature Adjustable Range: 35℃ To 48℃/2 Pcs Astringent Foot Soaker: 128oz/2 Pcs Cooling Foot Soak: Product Dimensions: ‎approximately 6.5-7" X 2.38-2.50" X 9.259.50", Weight: Atleast 900g/2 Pcs Exfoliating Foot Scrub: Package Dimensions: Approximately‎ 7.05-7.50" X 2.32-3" X 1.97-2", Weight: Atleast 6oz/4 Pcs Foot File And Callus Remover: Material: Metal, Steel, Item Dimensions: Approx. 10-10.78" X 2.7" X 0.29", Item Weight: 3.2 Pounds/2 Pcs Foot Scrub/2 Pcs Manicurist Bag: Made Of Heavy Duty Nylon, Large Capacity: Enough Room To Hold Up To 42 Bottles Of 15ml Nail Polish, Size: Approx. 8-9" (l) X 6-7" (w) X 4-5" (h)/6 Pcs Microfiber Towel: 25x65cm, 135g, Microfiber,dark Colors/2 Pcs Alcohol: 70% Ethyl Alcohol With Moisturizer, 500ml/1 Pc Double Burner Gas Stove: Stainless Top And Front, Automatic Ignition ,reversible Trivet, Double Detachable Top Burner, Removable Drip Pan, Dimension: 730mm(l) X 395mm(w) X 105mm(h)/1 Pc Lpg Tank With Gas Regulator And Accessories: Capacity: 11kg Cylinder With Gauge And Safety Device, Safety Push Protection For Leakage, Gas Auto Safe Controller, Rubber Gasket, Steel Belted, About 1.8m Hose, With Clamp/2 Pcs Kawa: 19.5" Cast Iron With Double Handle Depth/height: 21cm (medium)/1 Pc Plastic Table: 4 Seaters, Square Type With Umbrella Hole At The Center, Table Dimension: 36" (length) X 36" (width) X 30" (height), Thickness: Approximately 1.5in To 2in, Color: Beige/1 Pc Monoblock Chairs: With Backrest, Seat 375mmxdepth 330mm, 2.25 Kg, Class B Plastic, Thickness: Approximately 1.5in, Color: Beige/1 Pc Peanut Grinding Machine: Electric, 220v, 300w, 50-60hz,material: High Quality Stainless Steel Body And Base, Color: Black, Dimension: Approx. Length: 43.5cm, Width: 23cm, Height: 13.5cm/1 Pc Hand Cobbler Shoe Repair Machine Dual Cotton Nylon Line Sewing Machine Manual Leather Machine Shoe Sewing Machine Color Silver: Product Dimensions 14.4"d X 20.5"w X 5.5"h, Material: Cast Iron Item Weight: 22 Pounds, Power Source: Crank/5 Pcs Wooden Handle Shoes Repairing Awl Shoe Sewing Tool Diy Craft Repair Hand Straight Hook Shoes Sewing Awl Type: Shoes Sewing Awl Material: Wood+metal, Features: Shoes Sewing Awl, Repair Hand , Crochet Needle Tool Dimension: 1: App.2x13.5x6cm/0.79x5.31x2.36in 2: App.2x13x5.5cm/0.79x5.12x2.17in 3: App.2x13x5.5cm/0.79x5.12x2.17in, Color: Wood Color + Silver/5 Pcs Upholstery Stitching Thread Black 100 Mtr. 1 Pc Upholstery Hand Stitching Tools For Belts, Saddles, Shoes, Fabric Household Use Handwork Sewing Leather Craft Shoes Repairing/5 Pcs Upholstery Stitching Thread Brown 100 Mtr 1 Pc Upholstery Hand Stitching Tools For Belts, Saddles, Shoes, Fabric Household Use Handwork Sewing Leather Craft Shoes Repairing/5 Pcs Upholstery Stitching Thread White 100 Mtr. 1 Pc Upholstery Hand Stitching Tools For Belts, Saddles, Shoes, Fabric Household Use Handwork Sewing Leather Craft Shoes Repairing/2 Pcs Angle Grinder Cutting Disk: 10 Pcs. Per Set, Dimensions: Approx. 105mm (4") X 1.2mm (3/64"') X 16mm (5/8")/2 Pcs Angle Grinder: Rated Input Power: 730w, Wheel Diameter: 4", Rated Voltage: 220v,frequency: 60hz, No Load Speed: 12,000 Rpm, Weight: Approximately 1.6kg, Grinding Spindle Thread: M10, Disc Diameter: 100mm X 1 X 16mm, Dimension: 298mm (l), 77mm (w), 102mm (h)/2 Pcs Chipping Hammer: Item Weight: ‎at Least 13.8 Ounces, Product Dimensions: ‎11" (l) X 1" (w) X 7.5" (h), Material: Genuine Leather Grip And Forged Steel/2 Pcs Heavy Duty Corded Drill: Rated Input Power: 750w, Chuck Capacity: Up To 13mm, Drill Capacity: Metal (16mm), Wood (25mm), Masonry (12mm), Dimension: 268mm (l) X 69mm (w) X 192mm (h), Weight W/out Cable: Approximately 1.6-1.8 Kg, Spindle Collar Diameter Of 43 Mm/2 Pcs Metal Drill Bit Set: Material: High Speed Steel, 19pcs Per Set(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm,7.5mm,8mm,8.5mm,9mm,9.5mm,10mm), Point Angle: 118degree C, Standards: Din 338, Bit Geometry: Standard Twist Bit/2 Pcs Mig Welding Pliers: Overall Length: Atleast 210mm, Material: High Carbon Steel, Handle Material: Thermoplastic Rubber/2 Pcs Needle File Set: (6 Pieces Hand Metal Files, Hardened Alloy, Strength Steel Set Includes Flat, Flat Warding, Square, Triangular, Round, And Half-round File), Color Black, Metal Type: Carbon Steel, Handle Material: Wood, Alloy Steel, Item Dimensions: Approximately 6.1" (l) X 3" (w) X 0.5" (h)/2 Pcs Portable Welding Machine: Input Voltage: 220-240, Frequency: 50-60hz, Output Current: 10-220a, Led Display, No-load Voltage: 85v, Max. Output Current: 220a, Diameter Of Electrode: 1.6-3.2mm, Inclusions: 1 Pc Electrode Holder, 1 Pc Earth Clamp With Cable/2 Pcs Speed Square: Material: Cast Aluminum, Size: About 18x18x2cm/7.09x7.09x0.79", Weight: About 130g,triangle-shaped/2 Pcs Welding Helmet: Auto Darkening Helmet: Power Supply: Battery And Solar Powered, Light Shade: Din9-1, Dark Shade: Din4, Switching Time: 1/25000s, Delay Time: 0.1-0.8s, Sensitivity Adjustment: Stepless Control, Operation Temperature: -5 Degrees- 55 Degrees, Active Viewing Area: 93mmx43mm, Active Viewing Area Size: (+/- 10mm), Item Weight: At Least 1.85 Pounds, Package Dimensions: ‎approximately 12-12.4" (l) X 9-9.61" (w) X 7-7.68" (h)/2 Pcs Welding Magnets: 6 Pcs/set, Overall Length: At Least (3"), Hold Capacity: Up To 25lbs, Arrow Design Supports Angle: 45°, 90°, And 135°, Item Weight: 295g, Package Dimensions: ‎4.88 X 4.72 X 3.98 Inches, ‎material: Steel, Magnets Size: Approximately - Top (1-1.4cm), Bottom (6.5-7cm), Side (7-7.5cm) Thickness (1-1.3cm)/2 Pcs Welding Suit: 100% Cotton With Pyrovatex, 2 Back Pockets And Rule Pocket With Safety Gusset Feature, High Quality And Long Lasting, Two Way Zipper, Approximate Cloth Size: Large/10 Pcs Camping Dome Tent: Product Dimensions: 82.7"l X 55"w X 43.5"h, Item Weight: 4 Pounds Shape: D Shape Occupancy: 2 Person Included Components: Carry Bag, Stakes, Rainfly Water Resistance Technology 1000 Millimeters, Special Feature: Windproof, Sun Protection/outdoor Mat (banig):size (48" X 75") Material: Palm Leaves (buri)/10 Pcs Double Burner Gas Stove: Stainless Top And Front, Automatic Ignition ,reversible Trivet, Double Detachable Top Burner, Removable Drip Pan, Dimension: 730mm(l) X 395mm(w) X 105mm(h)/2 Unit Lpg Tank With Gas Regulator And Accessories: Capacity: 11kg Cylinder With Gauge And Safety Device, Safety Push Protection For Leakage, Gas Auto Safe Controller, Rubber Gasket, Steel Belted, About 1.8m Hose, With Clamp/1 Unit Gas Range: Approx. 55-70cm (l) X 50-60cm (w) X 86-93cm (h), 4-gas Burner, 62l Gas Oven, Button Ignition, Top Glass Lid, Net Weight: Maximum Of 28kg, Pan Support: Light Cast Iron Pan Support/5 Pcs Kawali: Aluminum, (diameter X Height) 28cmx8cm With Double Handle/2 Pc S Kawa: 19.5" Cast Iron With Double Handle Depth/height: 21cm (medium)/5 Pcs Wok Ladle: Material: Stainless Steel With Wooden Handle: Total Length Of Item: 24 Inches/5 Pcs Wok Spatula: Material: Stainless Steel With Wooden Handle, Total Length Of Item:24 Inches/5 Pcs Stainless Steel Long Wooden Handle Skimmer Strainer: Material: Stainless Steel, Size: 32.3*11.5cm/5 Pcs Casserole With Double Handle: Material: Aluminum, Size: 26cm, Dimension: 36(l) X 28.5(w) X 21(h)cm/5 Pcs Frying Tongs: Materials: Stainless Steel With Rubber Or Plastic Coated Handles, 12 Inch Long/5 Pcs Chopping Board: Material: Polypropylene Plastic: 8"(w) X 10"(l), 1cm (thickness)/5 Pcs Chopping Knife: 10" Stainless; Wood Handle/5 Pcs Grill/ Ihawan With Stand, Material Of Body And Stand: Stainless, 24x12x33inches (lxwxh), Depth: 5inches/1 Unit Heavy Duty Commercial Micromatic Big 7.8l Mrc-50 Rice Cooker 45cups (white)/10 Dz Melamine Round Dinner Plate: 9" Diameter, Color; White/10dz Platito (saucer): Material: Melamine Plastic, Standard Size: 6 Inch (diameter) X ¾ Inch Height/10 Pcs Serving Tray Bamboo - Wooden Tray With Handles, Color Brown Material Wood, Product Dimensions 17"l X 11"w X 2"h/10dz Drinking Glass: 8 Oz, Glass, Product Size: Base Diameter-7cm, Top Diameter: 7cm, H-11.4cm, Heat Resistant, Dishwasher Safe/10dz Spoon: Stainless, 12pcs/per Pack, Size: 8"/10dz Fork: Stainless, 12 Pcs/per Pack, Size 8"/5dz Mangkok (round Shape Bowl), Materials: Ceramic, Size: 6inch (diameter) X 5cm (height)/5 Pcs Storage Box With Wheels For Easy Transport, Measurements: L72 X W52 X H44cm, Food Grade Material, 120l Capacity, Stackable; With Lid And Handle, Color: White/2 Pcs Butcher's Knife: Materials: Stainless, Wood Handle, Size: About 10"/5 Pcs Gallon Acrylic Juice Dispenser Type: Type: Water/juice Dispensers, Overall Dimensions: Height:32 1/2 Inches, Top Diameter: 6 11/16 Inches, Capacity:1.1 Gallons, Base Material: Stainless Steel, Container Material: Acrylic, Style: Single/5 Pcs Chafing Dish Food Warmer Buffet Set: Size: 1/1pan*3, Color: Silver, Material: Stainless Steel, Product Dimensions: 13.39"l X 15.35"w X 23.62"h, Capacity: 8 Quarts/5 Pcs Chest Cooler: Item Package Dimensions: ‎25.8" (l) X 16.2" (w) X 15.7" (h), Package Weight: ‎5.76kg, Inside Dimensions: 24.95" (l) X 14.58" (w) X 14.77" (h), Material: ‎plastic, Chamber Depth: 24.95", Capacity: 52l , Color: Blue Or Red/5 Pcs Matress: Size: Semi Double (48" X 75"), Thickness: 4"/15 Pcs Matress Size: Queen (60" X 75") Thickness: 4"/15 Pcs Pillow: Size: Standard (20" X 26")/10 Sets Bed Linen Set Of 3pcs, 1-bed Sheet Size (48" X 75"), 2-pillow Case (20" X 26")/2 Sets Bed Linen Set Of 3pcs: 1-bed Sheet Size (60" X 75"), 2-pillow Case (20" X 26")/6 Unit Electric Fan: Color: Black, Electric Fan Design: Floor Fan, Power Source: Corded Electric Style: 3-speed Ac Motor Fan, Product Dimensions: 15.75"d X 17.72"w X 53.15"h, Room Type: Bedroom, Special Feature: Oscillating, Adjustable Height, Adjustable Tilt,wattage: 60 Watt/4 Unit Industrial Ceiling Fan: Product Material: Cast Aluminum Casing, Product Specifications: 2000mm, Operating Voltage: 220v, Wind Speed: 5th Gear, Number Of Fan Product Color: Black, White, Product Power: 165w, Blades: 6 Blades/150 Pcs Monoblock Chairs: With Backrest, Seat 375mmxdepth 330mm, 2.25 Kg, Class B Plastic, Thickness: Approximately 1.5in, Color: White/15 Pcs Solid Top Round Table: Material: Plastic, Color: White, Size(cm): 115 X 74 X 4.5, Foldable Legs,diameter: 45″, 6 To 8 Seater Capacity 20.2 Licenses And Permits Relevant To The Project And The Corresponding Law Requiring It: Bir Registration 21.2 Licenses And Permits Relevant To The Project And The Corresponding Law Requiring It: None General Conditions Of Contract 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. Additional Requirements For The Completion Of This Contract Shall Be Provided In The Special Conditions Of Contract(scc). 2. Advance Payment 2.1 Advance Payment Of The Contract Amount Is Provided Under Annex “d” Of The Revised 2016 Irr Of Ra No. 9184. 2.2 The Procuring Entity Is Allowed To Determine The Terms Of The Payment On The Partial Or Staggered Delivery Of The Goods Procured, Provided Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted In Accordance With Prevailing Accounting And Auditing Rules And Regulations. The Terms Of Payment Are Indicated In The Scc. 3. Performance Security Within Ten (10) Calendar Days From Receipt Of The Notice Of Award By The Bidder From The Procuring Entity But In No Case Later Than The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr. 4. Inspection And Tests The Procuring Entity Or Its Representatives Shall Have The Right To Inspect And/or The Test The Goods To Confirm Their Conformity To The Project. In Addition To Tests In The Scc, Section Vii(technical Specifications) Shall Specify What Inspections And/or Tests The Procuring Entity Requires, And Where They Are To Be Conducted. The Procuring Entity Shall Notify The Supplier In Writing, In A Timely Manner, Of The Identify Of Any Representatives Retained For These Purposes. All Reasonable Facilities And Assistance For The Inspection And Testing Of Goods, Including Access To Drawings And Production Data, Shall Be Provided By The Supplier To The Authorized Inspectors At No Charge To The Procuring Entity. 5. Warranty 7.1. In Order To Assure The Manufacturing Defects Shall Be Corrected By The Supplier, A Warranty Shall Be Required From The Supplier As Provided Under Section 62.1 Of The 2016 Revised Irr Of Ra No. 9184. 7.2. The Procuring Entity Shall Promptly Notify The Supplier In Writing Of Any Claims Arising Under This Warranty. Upon Receipt Of Such Notice, The Supplier Shall, Repair Or Replace The Defective Goods Or Parts Thereof Without Cost To The Procuring Entity, Pursuant To The Generic Procurement Manual. 6. Liability Of The Supplier The Supplier’s Liability Under This Contract Shall Be Provided By The Laws Of The Republic Of The Philippines. If The Supplier Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. Special Conditions Of Contract Gcc Clause 1 Delivery And Documents – For Purposes Of The Contract, “exw,” “fob,” “fca,” “cif,” “cip,” “ddp” And Other Trade Terms Used To Describe The Obligations Of The Parties Shall Have The Meanings Assigned To Them By The Current Edition Of Incoterms Published By The International Chamber Of Commerce, Paris. The Delivery Terms Of This Contract Shall Be As Follows: [for Goods Supplied From Within The Philippines] “the Delivery Terms Applicable To This Contract Are Delivered [indicate Place Of Destination]. Risk And Title Will Pass From The Supplier To The Procuring Entity Upon Receipt And Final Acceptance Of The Goods At Their Final Destination.” Delivery Of The Goods Shall Be Made By The Supplier In Accordance With The Terms Specified In Section Vi (schedule Of Requirements). For Purposes Of This Clause The Procuring Entity’s Representative At The Project Site Is Wilson G. Baliwas. Incidental Services – The Supplier Is Required To Provide All Of The Following Services, Including Additional Services, If Any, Specified In Section Vi. Schedule Of Requirements: A. Performance Or Supervision Of On-site Assembly And/or Start-up Of The Supplied Goods; B. Furnishing Of Tools Required For Assembly And/or Maintenance Of The Supplied Goods; C. Furnishing Of A Detailed Operations And Maintenance Manual For Each Appropriate Unit Of The Supplied Goods; D. Performance Or Supervision Or Maintenance And/or Repair Of The Supplied Goods, For A Period Of Time Agreed By The Parties, Provided That This Service Shall Not Relieve The Supplier Of Any Warranty Obligations Under This Contract; And E. Training Of The Procuring Entity’s Personnel, At The Supplier’s Plant And/or On-site, In Assembly, Start-up, Operation, Maintenance, And/or Repair Of The Supplied Goods. F. No Additional Incidental Service Requirements. The Contract Price For The Goods Shall Include The Prices Charged By The Supplier For Incidental Services And Shall Not Exceed The Prevailing Rates Charged To Other Parties By The Supplier For Similar Services. Spare Parts – The Supplier Is Required To Provide All Of The Following Materials, Notifications, And Information Pertaining To Spare Parts Manufactured Or Distributed By The Supplier: 1. Such Spare Parts As The Procuring Entity May Elect To Purchase From The Supplier, Provided That This Election Shall Not Relieve The Supplier Of Any Warranty Obligations Under This Contract; And 2. In The Event Of Termination Of Production Of The Spare Parts: I. Advance Notification To The Procuring Entity Of The Pending Termination, In Sufficient Time To Permit The Procuring Entity To Procure Needed Requirements; And Ii. Following Such Termination, Furnishing At No Cost To The Procuring Entity, The Blueprints, Drawings, And Specifications Of The Spare Parts, If Requested. The Spare Parts And Other Components Required Are Listed In Section Vi (schedule Of Requirements) And The Costs Thereof Are Included In The Contract Price. The Supplier Shall Carry Sufficient Inventories To Assure Ex-stock Supply Of Consumable Spare Parts Or Components For The Goods For A Period Of Three(3) Months. Spare Parts Or Components Shall Be Supplied As Promptly As Possible, But In Any Case, Within Three(3) Months Of Placing The Order. Packaging – The Supplier Shall Provide Such Packaging Of The Goods As Is Required To Prevent Their Damage Or Deterioration During Transit To Their Final Destination, As Indicated In This Contract. The Packaging Shall Be Sufficient To Withstand, Without Limitation, Rough Handling During Transit And Exposure To Extreme Temperatures, Salt And Precipitation During Transit, And Open Storage. Packaging Case Size And Weights Shall Take Into Consideration, Where Appropriate, The Remoteness Of The Goods’ Final Destination And The Absence Of Heavy Handling Facilities At All Points In Transit. The Packaging, Marking, And Documentation Within And Outside The Packages Shall Comply Strictly With Such Special Requirements As Shall Be Expressly Provided For In The Contract, Including Additional Requirements, If Any, Specified Below, And In Any Subsequent Instructions Ordered By The Procuring Entity. The Outer Packaging Must Be Clearly Marked On At Least Four (4) Sides As Follows: Name Of The Procuring Entity Name Of The Supplier Contract Description Final Destination Gross Weight Any Special Lifting Instructions Any Special Handling Instructions Any Relevant Hazchem Classifications A Packaging List Identifying The Contents And Quantities Of The Package Is To Be Placed On An Accessible Point Of The Outer Packaging If Practical. If Not Practical The Packaging List Is To Be Placed Inside The Outer Packaging But Outside The Secondary Packaging. Transportation – Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip, Or Ddp, Transport Of The Goods To The Port Of Destination Or Such Other Named Place Of Destination In The Philippines, As Shall Be Specified In This Contract, Shall Be Arranged And Paid For By The Supplier, And The Cost Thereof Shall Be Included In The Contract Price. Where The Supplier Is Required Under This Contract To Transport The Goods To A Specified Place Of Destination Within The Philippines, Defined As The Project Site, Transport To Such Place Of Destination In The Philippines, Including Insurance And Storage, As Shall Be Specified In This Contract, Shall Be Arranged By The Supplier, And Related Costs Shall Be Included In The Contract Price. Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip Or Ddp, Goods Are To Be Transported On Carriers Of Philippine Registry. In The Event That No Carrier Of Philippine Registry Is Available, Goods May Be Shipped By A Carrier Which Is Not Of Philippine Registry Provided That The Supplier Obtains And Presents To The Procuring Entity Certification To This Effect From The Nearest Philippine Consulate To The Port Of Dispatch. In The Event That Carriers Of Philippine Registry Are Available But Their Schedule Delays The Supplier In Its Performance Of This Contract The Period From When The Goods Were First Ready For Shipment And The Actual Date Of Shipment The Period Of Delay Will Be Considered Force Majeure. The Procuring Entity Accepts No Liability For The Damage Of Goods During Transit Other Than Those Prescribed By Incoterms For Ddp Deliveries. In The Case Of Goods Supplied From Within The Philippines Or Supplied By Domestic Suppliers Risk And Title Will Not Be Deemed To Have Passed To The Procuring Entity Until Their Receipt And Final Acceptance At The Final Destination. Intellectual Property Rights – The Supplier Shall Indemnify The Procuring Entity Against All Third-party Claims Of Infringement Of Patent, Trademark, Or Industrial Design Rights Arising From Use Of The Goods Or Any Part Thereof. 2.2 Partial Payment Is Not Applicable. 4 The Inspections And Tests That Will Be Conducted Are: Inspection Of The Livelihood Supplies And Materials If It Follows The Technical Specification Set By The End-user Unit. Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. Item No. Quantity Item Description Total Delivered, Weeks/months Remarks Indicate Here Any Other Appropriate Information As May Be Necessary. Signature Over Printed Name Position Department/division Technical Specifications Technical Specifications Item / Service Maximum Quantity Technical Specifications / Scope Of Work Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution.] Checklist Of Technical And Financial Documents I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages) In Accordance With Section 8.5.2 Of The Irr; (b) Registration From Sec, Department Of Trade And Industry(dti) For Sole Proprietorship And Cda For Cooperatives (c) Valid Mayor’s Permit By The City Or Municipality Where The Principal Place Of Business Is Located (d) Tax Clearance Per Eo 398 Technical Documents ⬜ (e) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (f) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided For In Sections 23.4.1.3 And 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184, Within The Relevant Period As Provided In The Bidding Documents; And ⬜ (g) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission Or Original Copy Of Notarized Bid Securing Declaration; And ⬜ (h) Conformity With The Technical Specifications, Which May Include Production/delivery Schedule, Manpower Requirements, And/or After-sales/parts, If Applicable; And ⬜ (i) Original Duly Signed Omnibus Sworn Statement (oss) And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ (j) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc) Or A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation. Class “b” Documents ⬜ (k) If Applicable, A Duly Signed Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Ii. Financial Component Envelope ⬜ (l) Original Of Duly Signed And Accomplished Financial Bid Form; And ⬜ (m) Original Of Duly Signed And Accomplished Price Schedule(s). Other Documentary Requirements Under Ra No. 9184 (as Applicable) ⬜ (n) [for Foreign Bidders Claiming By Reason Of Their Country’s Extension Of Reciprocal Rights To Filipinos] Certification From The Relevant Government Office Of Their Country Stating That Filipinos Are Allowed To Participate In Government Procurement Activities For The Same Item Or Product. ⬜ (o) Certification From The Dti If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity.   Omnibus Sworn Statement(revised) Republic Of The Philippines ) City/municipality Of ______ ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. Select One, Delete The Other: If A Sole Proprietorship: I Am The Sole Proprietor Or Authorized Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; If A Partnership, Corporation, Cooperative, Or Joint Venture: I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; 2. Select One, Delete The Other: If A Sole Proprietorship: As The Owner And Sole Proprietor Or Authorized Representative Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] As Shown In The Attached Duly Notarized Special Power Of Attorney; If A Partnership, Corporation, Cooperative, Or Joint Venture: I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g. Duly Notarized Secretary’s Certificate, Board/partnership Resolution Or Special Power Of Attorney, Whichever Is Applicable]; 3. [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For And In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. [name Of Bidder] Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. Select One, Delete The Rest: If A Sole Proprietorship: The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; If A Partnership Or Cooperative: None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; If A Corporation Or Joint Venture: None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. [name Of Bidder] Complies With Existing Labor Laws And Standards; And 8. [name Of Bidder] Is Aware Of And Has Undertaken The Following Responsibilities As A Bidder: A) Carefully Examine All Of The Bidding Documents; B) Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C) Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D) Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The [name Of The Project]. 9. [name Of Bidder] Did Not Give Or Pay, Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Of Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling(estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 Series Of 1930, As Amended, Or The Revised Penal Code. In Witness Whereof, I Have Hereunto Set My Hand This ___________ Day Of __________________, 2024 At ____________, Philippines. _____________________________________ Bidder’s Representative/authorized Signatory [insert Signatory’s Legal Capacity] Affiant Subscribed And Sworn To Before Me A Notary Public For And Within The Province/city Pf __________________, On This ________ Day Of _______________, 2024 At __________________________ By The Above Named Affiant With His/her __________________ As The Competent Evidence Of His/her Identity And Avows Under Penalty Of Law That All The Statements Contained On This Instrument Are True And Correct. Doc. No. ______________ Page No: ______________ Book No. ______________ Series Of 2024. Republic Of The Philipppines ) City Of Sorsogon ) S.s. X ---------------------------------------------------x Bid Securing Declaration Project Identification No. ______ To: [insert Name And Address Of Procuring Entity] I/we, The Undersigned, Declare That: 1. I/we Understand That, According To Your Conditions, Bids Must Be Supported By A Bid Security, Which May Be In The Form Of A Bid-securing Declaration. 2. I/we Accept That: (a) I Will Be Automatically Disqualified From Bidding For Any Procurement Contract With Any Procuring Entity For A Period Of Two(2) Years Upon Receipt Of Your Blacklisting Order; And, (b) I/we Will Pay The Applicable Fine Provided Under Section 6 Of The Guidelines On The Use Of Bid Securing Declaration, Within Fifteen(15) Days From Receipt Of The Written Demand By The Procuring Entity For The Commission Of Acts Resulting To The Enforcement Of The Bid Securing Declaration Under Sections 23.1(b), 34.2, 40.1 And 69.1(f) Of The Irr Of Ra No. 9184; Without Prejudice To Other Legal Action The Government May Undertake. 3. I/we Understand That This Bid-securing Declaration Shall Cease To Be Valid On The Following Circumstances: (a) Upon Expiration Of The Bid Validity Period, Or Any Extension Thereof Pursuant To Your Request; (b) I Am Declared Ineligible Or Post Disqualified Upon Receipt Of Your Notice To Such Effect, And (i) I/we Failed To Timely File A Request For Reconsideration Or (ii) I/we Filed A Waiver To Avail Of Said Right; And (c) I Am/we Declared As The Bidder With The Lowest Calculated And Responsive Bid And I/we Have Furnished The Performance Security And Signed The Contract. In Witness Whereof, I Have Hereunto Set My Hand This _____ Day Of ________, 2024 At __________________. _____________________________________ Bidder’s Representative/authorized Signatory [insert Signatory’s Legal Capacity] Affiant Subscribed And Sworn To Before Me A Notary Public For And Within The Province/city Pf __________________, On This ________ Day Of _______________, 2024 At __________________________ By The Above Named Affiant With His/her __________________ As The Competent Evidence Of His/her Identity And Avows Under Penalty Of Law That All The Statements Contained On This Instrument Are True And Correct. Doc. No. __________ Page No. __________ Book No. __________ Series Of 2024. Bid Form For The Procurement Of Goods (shall Be Submitted With The Bid) Bid Form Date: _____________________________ Project Identification No.: _____________ To: [name And Address Of Procuring Entity] Having Examined The Philippine Bidding Documents(pbds) Including The Supplemental Or Bid Bulletin Numbers_____, The Receipt Of Which Is Hereby Duly Acknowledged, We, The Undersigned, Offer To (supply/deliver/perform) (description Of The Goods) In Conformity With The Said Pbds For The Sum Of (total Bid Amount In Words And Figures) Or The Total Calculated Bid Price, As Evaluated And Corrected For Computational Errors , And Other Bid Modifications In Accordance With The Price Schedules Attached Herewith And Made Part Of This Bid. The Total Bid Price Includes The Cost Of All Taxes, Such As, But Not Limited To (specify The Applicable Taxes, E.g. (i) Value Added Tax, (ii) Income Tax, (iii) Local Taxes, And (iv) Other Fiscal Levies And Duties), Which Are Itemized Herein Or In The Price Schedules. If Our Bid Is Accepted, We Undertake: A.to Deliver The Goods In Accordance With The Delivery Schedule Specified In The Schedule Of Requirements Of The Philippine Bidding Documents(pbds); B. To Provide A Performance Security In The Form, Amounts, And Within The Times Prescribed In The Pbds; C. To Abide By The Bid Validity Specified In The Pbds And It Shall Remain Binding Upon Us At Any Time Before The Expiration Of That Period. Until A Formal Contract Is Prepared And Executed, This Bid, Together With Your Written Acceptance Thereof And Your Notice Of Award, Shall Be Binding Upon Us. We Understand That You Are Not Bound To Accept The Lowest Calculated Bid Or Any Bid You May Receive. We Certify/conform That We Comply With The Eligibility Requirements Pursuant To The Pbds. The Undersigned Is Authorized To Submit The Bid On Behalf Of (name Of The Bidder) As Evidenced By The Attached (state The Written Authority). We Acknowledge That Failure To Sugn Each And Every Page Of This Bid Form, Including, The Attached Schedule Of Prices, Shall Be A Ground For The Rejection Of Our Bid. Name: Legal Capacity: Signed: Duly Authorized To Sign The Bid For And On Behalf Of: Date: ___________ Contract Agreement For The Procurement Of Goods(revised) __________________________________________________________________________ This Agreement, Made The _________ Day Of _______________, ________ Between [name And Address Of Procuring Entity] Of The Philippines (hereinafter Called The“entity”) Of The One Part And [name Of Supplier] (hereinafter Called The “supplier”) Of The Other Part. Whereas, The Entity Invited Bids For Certain Goods And Ancillary Services, Particularly (brief Description Of Goods And Services) And Has Accepted A Bid By The Supplier For The Supply Of Those Goods And Services In The Sum Of (contract Price In Words And Figures In Specified Currency) (hereinafter Called The “contract Price”). Now This Agreement Witnesseth As Follows: 1. In This Agreement, Words And Expressions Shall Have The Same Meanings As Are Respectively Assigned To Them In The Conditions Of Contract Hereinafter Referred To. 2. The Following Documents As Required By The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 Shall Be Deemed To Form And Be Read And Construed As Part Of This Agreement, Viz.: I. Philippine Bidding Documents(pbds) I. Schedule Of Requirements; Ii.technical Specifications; Iii.bill Of Quantities Iv.general And Special Conditions Of Contract; V.supplemental Or Bid Bulletins, If Any Ii. Winning Bidder’s Bid, Including The Eligibility Requirements, Technical And Financial Proposals, And All Other Documents Or Statements Submitted; Bid Form, Including All The Documents/statements Submitted; Bid Form, Including All The Documents/statements Contained In The Bidder’s Bidding Envelopes, As Annexes, And All Other Documents Submitted(e.g., Bidder’s Response To Request For Clarifications On The Bid), Including Corrections To The Bid, If Any, Resulting From The Procuring Entity’s Bid Evaluation; C. Performance Security D. Notice Of Award Of Contract And The Bidder’s Conforme Thereto; And E. Other Contract Documents That May Be Required By Existing Laws And/or The Procuring Entity Concerned In The Pbds. Winning Bidder Agrees That Additional Contract Documents Or Information Prescribed By The Gppb That Are Subsequently Required For Submission After The Contract Execution, Such As The Notice To Proceed, Variation Orders And Warranty Security, Shall Likewise Form Part Of The Contract. 3. In Consideration For The Sum Of [total Contract Price In Words And Figures) Or Such Other Sums As May Be Ascertained, [name Of Bidder] Agrees To Execute The [state The Object Of The Contract] In Accordance With His/her/its Bid. 4. The [name Of The Procuring Entity] To Pay The Above-mentioned Sum In Accordance With The Terms Of Bidding. In Witness, Whereof The Parties Thereto Have Caused This Agreement To Be Executed The Day And Year First Before Written. Binding Signature Of The Procuring Entity: Binding Signature Of Supplier: Insert Name And Signature] [insert Name And Signature] [insert Signatory’s Legal Capacity] [insert Signatory’s Legal Capacity] Signed In The Presence Of: ______________________ ________________ Liaison Officer For: For: [insert Procuring Entity] [insert Name Of Supplier] Acknowledgement Before Me, As The Notary Public For And In The City/municipality Of _____________, Personally Appeared _________________, Representing The ________________________ With _____________ Issued On __________ At __________________ And ___________________, _____________________ Representing ________________________ With ______________________ Issued On _________________ At __________________________, Known To Me The Same Persons Who Executed The Foregoing Contract Agreement And They Acknowledged To Me That The Same Are Their True Act And Deed For And In Behalf Of The Parties They Represent. This Instrument Consists Of ____ Pages Including This Page On Which The Acknowledgement Is Written Duly Signed By The Contracting Parties And Their Witnesses. In Witness Whereof, I Have Hereunto Affixed My Signature And Seal This _______ Day _____________, Philippines. Doc. No. ______________ Page No: ______________ Book No. ______________ Series Of 2024.

Details: Description Republic Of The Philippines Department Of Justice Bureau Of Corrections Muntinlupa City Philippine Bidding Documents Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) At Sablayan Prison And Penal Farm (sppf) (procurement/contract No. 009) Sixth Edition July 2020 Bids And Awards Committee 202 Table Of Contents Section I. Invitation To Bid 3 Section Ii. Instructions To Bidders 6 Section Iii. Bid Data Sheet 13 Section Iv. General Conditions Of Contract 19 Section V. Special Conditions Of Contract 24 Section Vi. Specifications 26 Section Vii. Drawings 59 Section Viii. Bill Of Quantities 60 Section Ix. Checklist Of Technical And Financial Documents 61 Section I. Invitation To Bid Republic Of The Philippines Department Of Justice Bureau Of Corrections Muntinlupa City Invitation To Bid Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) At Sablayan Prison And Penal Farm (sppf) 1. The Bureau Of Corrections, Through The National Expenditure Program (nep) Of 2025 Capital Outlay, Intends To Apply The Sum Of Three Hundred Million Pesos Only (₱300,000,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) At Sablayan Prison And Penal Farm (sppf) With Identification Number _epa-009__. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Bureau Of Corrections Now Invites Bids For Provision Of A Detailed Preliminary Architectural And Engineering Design, Detailed Engineering Requirements And Actual Construction Of The Bureau Of Corrections Super Maximum Security Facility, Based On The Final Detailed Architectural And Engineering Design, To Be Approved By The Head Of Procuring Entity Or Its Duly Authorized Representative Conformably With The Minimum Standards Set Forth In The (1) Presidential Decree (pd) No. 1096, National Building Code Of The Philippines (2) Batas Pambansa (bp)blg. 344, An Act To Enhance The Mobility Of Disabled Persons By Requiring Certain Public Buildings, Institutions, Establishments And Public Utilities To Install Facilities And Other Devices (3) National Structural Code Of The Philippines (nscp), Volume I, 2010 (4) Philippine Electrical Code (pec), 2009 (5) Revised Plumbing Code Of The Philippines (6) Revised Irr Of Ra 10575 (7) Republic Act (ra) No. 9514, Revised Fire Code Of The Philippines And (8) Applicable Local Regulations And Ordinances. Completion Of The Works Is Required Within Three Hundred Sixty-five (365) Calendar Days. Bidders Should Have Completed A Contract Similar To The Project Amounting To At Least Fifty Percent (50%) Of The Abc Within The Last Six (6) Years. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act.” Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Cooperatives, And Partnerships Or Organizations With At Least Seventy-five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines. 4. Interested Bidders May Obtain Further Information From Bureau Of Corrections And Inspect The Bidding Documents At The Address Given Below From Monday To Friday From 8:00am To 5:00pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On _december 28, 2024 (08:00am To 05:00pm) To January 20, 2025 (01:29 Pm)_____ From The Given Address And Website(s) Below. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity Bucor.gov.ph, Provided That Bidders Shall Pay The Applicable Fee Of Fifty Thousand (₱50,000.00) Pesos Only For The Bidding Documents Not Later Than The Submission Of Their Bids. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person Or By Facsimile. 6. The Bureau Of Corrections Will Hold A Pre-bid Conference On _january 06, 2025 (01:30pm)__ At Bac Conference Room Nbp Reservation Muntinlupa City, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below, On Or Before __january 20, 2025 (01:30pm)_____. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. 9. Bid Opening Shall Be On __january 20, 2025 (01:30pm)____ At The Bac Conference Room Nbp Reservation Muntinlupa City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Bureau Of Corrections Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Ma. Adoracion I. Viñas Office Of The Bac Secretariat Supply Office, Bureau Of Corrections, Muntinlupa City Tel # 02-8809-8587/02-8478-0907 Bacsec2022@gmail.com 12. You May Visit The Following Websites: For Downloading Of Bidding Documents: Bucor.gov.ph Date Of Issue: _______________ Ccsupt Celso S Bravo Chairperson, Bids And Awards Committee Section Ii. Instructions To Bidders 1. Scope Of Bid The Procuring Entity, Bureau Of Corrections Invites Bids For The Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) At Sablayan Prison And Penal Farm (sppf), With Project Identification Number__________________. [note: The Project Identification Number Is Assigned By The Procuring Entity Based On Its Own Coding Scheme And Is Not The Same As The Philgeps Reference Number, Which Is Generated After The Posting Of The Bid Opportunity On The Philgeps Website.] The Procurement Project Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) At Sablayan Prison And Penal Farm (sppf) Is For The Construction Of Works, As Described In Section Vi (specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding As Indicated Below For 2025 In The Amount Of Three Hundred Million Pesos Only (₱300,000,000.00). 2.2. The Source Of Funding Is: Nga, The National Expenditure Program 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manual And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Invitation To Bid By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Inspected The Site, Determined The General Characteristics Of The Contracted Works And The Conditions For This Project, Such As The Location And The Nature Of The Work; (b) Climatic Conditions; (c) Transportation Facilities; (c) Nature And Condition Of The Terrain, Geological Conditions At The Site Communication Facilities, Requirements, Location And Availability Of Construction Aggregates And Other Materials, Labor, Water, Electric Power And Access Roads; And (d) Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices The Procuring Entity, As Well As The Bidders And Contractors, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. The Bidder Must Have An Experience Of Having Completed A Single Largest Completed Contract (slcc) That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc Adjusted, If Necessary, By The Bidder To Current Prices Using The Psa’s Cpi, Except Under Conditions Provided For In Section 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184. A Contract Is Considered To Be “similar” To The Contract To Be Bid If It Has The Major Categories Of Work Stated In The Bds. 5.3. For Foreign-funded Procurement, The Procuring Entity And The Foreign Government/foreign Or International Financing Institution May Agree On Another Track Record Requirement, As Specified In The Bidding Document Prepared For This Purpose. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.2 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Associated Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un. 7. Subcontracts 7.1. The Bidder May Subcontract Portions Of The Project To The Extent Allowed By The Procuring Entity As Stated Herein, But In No Case More Than Fifty Percent (50%) Of The Project. The Procuring Entity Has Prescribed That: A. Subcontracting Is Not Allowed. 7.1. [if Procuring Entity Has Determined That Subcontracting Is Allowed During The Bidding, State:] The Bidder Must Submit Together With Its Bid The Documentary Requirements Of The Subcontractor(s) Complying With The Eligibility Criteria Stated In Itb Clause 5 In Accordance With Section 23.4 Of The 2016 Revised Irr Of Ra No. 9184 Pursuant To Section 23.1 Thereof. 7.2. [if Subcontracting Is Allowed During The Contract Implementation Stage, State:] The Supplier May Identify Its Subcontractor During The Contract Implementation Stage. Subcontractors Identified During The Bidding May Be Changed During The Implementation Of This Contract. Subcontractors Must Submit The Documentary Requirements Under Section 23.1 Of The 2016 Revised Irr Of Ra No. 9184 And Comply With The Eligibility Criteria Specified In Itb Clause 5 To The Implementing Or End-user Unit. 7.3. Subcontracting Of Any Portion Of The Project Does Not Relieve The Contractor Of Any Liability Or Obligation Under The Contract. The Supplier Will Be Responsible For The Acts, Defaults, And Negligence Of Any Subcontractor, Its Agents, Servants, Or Workmen As Fully As If These Were The Contractor’s Own Acts, Defaults, Or Negligence, Or Those Of Its Agents, Servants, Or Workmen. 8. Pre-bid Conference The Procuring Entity Will Hold A Pre-bid Conference For This Project On The Specified Date And Time And Either At Its Physical Address At Bac Conference Room Nbp Reservation Muntinlupa City And/or Through Videoconferencing/webcasting} As Indicated In Paragraph 6 Of The Ib. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Ix. Checklist Of Technical And Financial Documents. 10.2. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. For Contracting Parties To The Apostille Convention, Only The Translated Documents Shall Be Authenticated Through An Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 10.3. A Valid Pcab License Is Required, And In Case Of Joint Ventures, A Valid Special Pcab License, And Registration For The Type And Cost Of The Contract For This Project. Any Additional Type Of Contractor License Or Permit Shall Be Indicated In The Bds. 10.4. A List Of Contractor’s Key Personnel (e.g., Project Manager, Project Engineers, Materials Engineers, And Foremen) Assigned To The Contract To Be Bid, With Their Complete Qualification And Experience Data Shall Be Provided. These Key Personnel Must Meet The Required Minimum Years Of Experience Set In The Bds. 10.5. A List Of Contractor’s Major Equipment Units, Which Are Owned, Leased, And/or Under Purchase Agreements, Supported By Proof Of Ownership, Certification Of Availability Of Equipment From The Equipment Lessor/vendor For The Duration Of The Project, As The Case May Be, Must Meet The Minimum Requirements For The Contract Set In The Bds. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Ix. Checklist Of Technical And Financial Documents. 11.2. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.3. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 9184. 12. Alternative Bids Bidders Shall Submit Offers That Comply With The Requirements Of The Bidding Documents, Including The Basic Technical Design As Indicated In The Drawings And Specifications. Unless There Is A Value Engineering Clause In The Bds, Alternative Bids Shall Not Be Accepted. 13. Bid Prices All Bid Prices For The Given Scope Of Work In The Project As Awarded Shall Be Considered As Fixed Prices, And Therefore Not Subject To Price Escalation During Contract Implementation, Except Under Extraordinary Circumstances As Determined By The Neda And Approved By The Gppb Pursuant To The Revised Guidelines For Contract Price Escalation Guidelines. 14. Bid And Payment Currencies 14.1. Bid Prices May Be Quoted In The Local Currency Or Tradable Currency Accepted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreign Currencies Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 14.2. Payment Of The Contract Price Shall Be Made In: A. Philippine Pesos. 15. Bid Security 15.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 15.2. The Bid And Bid Security Shall Be Valid Until One Hundred Twenty (120) Calendar Days. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 16. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. If The Procuring Entity Allows The Submission Of Bids Through Online Submission To The Given Website Or Any Other Electronic Means, The Bidder Shall Submit An Electronic Copy Of Its Bid, Which Must Be Digitally Signed. An Electronic Copy That Cannot Be Opened Or Is Corrupted Shall Be Considered Non-responsive And, Thus, Automatically Disqualified. 17. Deadline For Submission Of Bids The Bidders Shall Submit On The Specified Date And Time And Either At Its Physical Address Or Through Online Submission As Indicated In Paragraph 7 Of The Ib. 18. Opening And Preliminary Examination Of Bids 18.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 18.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Entity’s Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, All Bids And Combinations Of Bids As Indicated In The Bds Shall Be Received By The Same Deadline And Opened And Evaluated Simultaneously So As To Determine The Bid Or Combination Of Bids Offering The Lowest Calculated Cost To The Procuring Entity. Bid Security As Required By Itb Clause 16 Shall Be Submitted For Each Contract (lot) Separately. 19.3. In All Cases, The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184 Must Be Sufficient For The Total Of The Abcs For All The Lots Participated In By The Prospective Bidder. 20. Post Qualification Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps), And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Section Iii. Bid Data Sheet Bid Data Sheet Itb Clause 5.2 For This Purpose, Contracts Similar To The Project Refer To Contracts Which Have The Same Major Categories Of Work, Which Shall Be: Architectural, Engineering Design, Detailed Engineering Requirements And Construction Of Building With Concreting Works. 7.1 Subcontracting Is Not Allowed 10.3 A Valid Pcab License Is Required, And In Case Of Joint Ventures, A Valid Special Pcab License, And Registration For The Type And Cost Of The Contract For This Project. 10.4 The Key Personnel Must Meet The Required Minimum Years Of Experience Set Below: For Design Personnel: Key Personnel General Experience Relevant Experience Principal Architect The Principal Architect Must Be Duly-licensed With At Least Ten (10) Years’ Experience Experience In The Design Of Residential, Government Offices Or Institutional Facilities, And Shall Preferably Be Knowledgeable In The Application Of Rapid Construction Technologies. Structural Engineer The Structural Engineer Must Be A Duly-licensed Civil Engineer With At Least Ten (10) Years’ Experience. Experience In Structural Design And Shall Preferably Be Knowledgeable In The Application Of Rapid Construction Technologies. Professional Electrical Engineer The Electrical Engineer Must Be A Registered Professional Electrical Engineer With At Least Five (5) Years’ Experience. Experience In The Design Of Lighting, Power Distribution, Communication Systems (specifically Structured And Local Area Network Cabling, Pabx), Building Management Systems And Preferably Knowledgeable In Developments In Emergent Efficient Lighting Technologies And Energy Management. Professional Mechanical Engineer The Mechanical Engineer Must Be A Professional Mechanical Engineer With At Least Five (5) Years’ Experience. Experience In Hvac And Fire Protection Systems And Preferably Knowledgeable In Emergent, Alternative Energy- Efficient Hvac Technologies. Electronics And Communications Engineer The Electronics And Communications Engineer Must Be Duly-licensed With At Least Five (5) Years’ Experience. Experience In The Design Of Communications Systems, And Preferably Knowledgeable In The Application Of Building Automation And Surveillance Systems. Sanitary Engineer The Sanitary Engineer Must Be Duly-licensed With At Least Five (5) Years’ Experience. Experience In The Design Of Building Water Supply And Distribution, Plumbing, And Preferably Knowledgeable In Waste Water Management/treatment, And Emergent, Alternative Effluent Collection And Treatment System. The Design & Build Contractor May, As Needed And At Its Own Expense, Add Additional Professionals And/or Support Personnel For The Optimal Performance Of All Architectural And Engineering Design Services, As Stipulated In These Terms Of Reference, For The Project. Prospective Bidders Shall Attach Each Individual’s Resume And Prc License Of The (professional) Staff. Design Personnel May Also Be Utilized For The Construction Phase Provided That The Same Meet The Minimum Number Of Years Of Experience In The Construction Of Similar Projects. For Construction Personnel: Key Personnel General Experience Relevant Experience Project Manager The Project Manager Shall Be A Licensed Architect Or Engineer With At Least Eight (8) Years Relevant Experience. Relevant Experience On Similar And Comparable Projects In Different Locations. The Project Manager Should Have A Proven Record Or Managerial Capability Through The Directing/managing Of Major Civil Engineering Works, Including Projects Of A Similar Magnitude. Project Architect/engineer The Project Architect/engineer Shall Be A Licensed Architect Or Engineer With At Least Five (5) Years’ Experience. Experience In Similar And Comparable Projects And Shall Preferably Be Knowledgeable In The Application Of Rapid Construction Technologies. Materials Engineer (m.e. I) The Materials Engineer Must Be Duly Accredited With The Dpwh And With At Least Five (5) Years’ Experience. Experience In Similar And Comparable Projects And Shall Preferably Be Knowledgeable In The Application Of Rapid Construction Technologies. Electrical Engineer The Electrical Engineer Must Be Duly-licensed With At Least Five (5) Years’ Experience. Experience In Similar And Comparable Projects In The Installation Of Lighting, Power Distribution, Communication Systems (specifically Structured And Local Area Network Cabling, Pabx), Building Management Systems. Mechanical Engineer The Mechanical Engineer Must Be Duly-licensed With At Least Five (5) Years’ Experience. Experience In Similar And Comparable Projects In The Installation Of Hvac And Fire Protection. Sanitary Engineer The Sanitary Engineer Must Be Duly-licensed With At Least Five (5) Years’ Experience. Experience In Similar And Comparable Projects In The Installation Of Building Water Supply And Distribution, Plumbing. Foreman The Foreman Must Have At Least Five (5) Years’ Experience. Experience In Similar And Comparable Projects And Shall Preferably Be Knowledgeable In The Application Of Rapid Construction Technologies. Safety Officer The Sanitary Officer Must Have At Least Two (2) Years’ Experience. Must Be An Accredited Safety Practitioner By The Department Of Labor And Employment (dole) And Must Have Undergone The Prescribed Forty (40) Hour Construction Safety And Health Training (cosh) 10.5 The Minimum Major Equipment Requirements Are The Following: Equipment Capacity Number Of Units Backhoe At Least 38hp With 0.055 To 0.160 M3 Bucket Capacity 1 Pay Loader At Least 2.5 To 9.5 M3 Bucket Capacity 1 Dump Truck At Least 10 Cu.m. 2 Generator 50kva 1 Concrete Mixers 1 Bagger 4 Welding Machines 300amp Heavy Duty 4 Submersible Dredging Pump At Least 1hp And 2” Output 1 Prospective Bidders Shall Attach The List Of Contractor’s Major Equipment Units, Which Are Owned, Leased, And/or Under Purchase Agreements, Supported By Proof Of Ownership, Certification Of Availability Of Equipment From The Equipment Lessor/vendor For The Duration Of The Project, As The Case May Be. 12 No Further Instructions. 15.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration Or Any Of The Following Forms And Amounts: A. The Amount Of Not Less Than 2% Of The Abc, If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; B. The Amount Of Not Less Than 5% Of The Abc, If Bid Security Is In Surety Bond. 19.2 No Further Instructions. 20 Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its; 1. Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps) 2. Supporting Documents For The Slcc (notice Of Award And/or Notice To Proceed And Project Owner’s Certificate Of Final Acceptance Issued By The Owner Other Than The Contractor Or The Constructors Performance Evaluation System (cpes) Final Rating, Which Must Be At Least Satisfactory. In Case Of Contracts With The Private Sector, An Equivalent Document Shall Be Submitted) 3. Certified True Copy Coming From The Issuing Agency Of Valid And Current Registration Certificate (sec Certificate Of Registration For Corporation Or Dti Certificate Of Registration For Sole Proprietorship Or Cda Certificate Of Registration For Cooperative) 4. Valid And Current Mayor’s Or Business Permit 5. Valid And Current Tax Clearance 6. Valid And Current Pcab License And Registration 7. Audited Financial Statement 8. Three (3) Sets Photocopy Of Eligibility And Financial Envelope Duly Marked As “copy No.1”, “copy No.2” And “copy No.3” 21 No Further Instructions. Section Iv. General Conditions Of Contract 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. 2. Sectional Completion Of Works If Sectional Completion Is Specified In The Special Conditions Of Contract (scc), References In The Conditions Of Contract To The Works, The Completion Date, And The Intended Completion Date Shall Apply To Any Section Of The Works (other Than References To The Completion Date And Intended Completion Date For The Whole Of The Works). 3. Possession Of Site 3.1 The Procuring Entity Shall Give Possession Of All Or Parts Of The Site To The Contractor Based On The Schedule Of Delivery Indicated In The Scc, Which Corresponds To The Execution Of The Works. If The Contractor Suffers Delay Or Incurs Cost From Failure On The Part Of The Procuring Entity To Give Possession In Accordance With The Terms Of This Clause, The Procuring Entity’s Representative Shall Give The Contractor A Contract Time Extension And Certify Such Sum As Fair To Cover The Cost Incurred, Which Sum Shall Be Paid By Procuring Entity. 3.2 If Possession Of A Portion Is Not Given By The Above Date, The Procuring Entity Will Be Deemed To Have Delayed The Start Of The Relevant Activities. The Resulting Adjustments In Contract Time To Address Such Delay May Be Addressed Through Contract Extension Provided Under Annex “e” Of The 2016 Revised Irr Of Ra No. 9184. 4. The Contractor’s Obligations The Contractor Shall Employ The Key Personnel Named In The Schedule Of Key Personnel Indicating Their Designation, In Accordance With Itb Clause 10.3 And Specified In The Bds, To Carry Out The Supervision Of The Works. The Procuring Entity Will Approve Any Proposed Replacement Of Key Personnel Only If Their Relevant Qualifications And Abilities Are Equal To Or Better Than Those Of The Personnel Listed In The Schedule. 5. Performance Security 5.1. Within Ten (10) Calendar Days From Receipt Of The Notice Of Award From The Procuring Entity But In No Case Later Than The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr. 5.2. The Contractor, By Entering Into The Contract With The Procuring Entity, Acknowledges The Right Of The Procuring Entity To Institute Action Pursuant To Ra No. 3688 Against Any Subcontractor Be They An Individual, Firm, Partnership, Corporation, Or Association Supplying The Contractor With Labor, Materials And/or Equipment For The Performance Of This Contract. 6. Site Investigation Reports The Contractor, In Preparing The Bid, Shall Rely On Any Site Investigation Reports Referred To In The Scc Supplemented By Any Information Obtained By The Contractor. 7. Warranty 7.1. In Case The Contractor Fails To Undertake The Repair Works Under Section 62.2.2 Of The 2016 Revised Irr, The Procuring Entity Shall Forfeit Its Performance Security, Subject Its Property (ies) To Attachment Or Garnishment Proceedings, And Perpetually Disqualify It From Participating In Any Public Bidding. All Payables Of The Gop In His Favor Shall Be Offset To Recover The Costs. 7.2. The Warranty Against Structural Defects/failures, Except That Occasioned-on Force Majeure, Shall Cover The Period From The Date Of Issuance Of The Certificate Of Final Acceptance By The Procuring Entity. Specific Duration Of The Warranty Is Found In The Scc. 8. Liability Of The Contractor Subject To Additional Provisions, If Any, Set Forth In The Scc, The Contractor’s Liability Under This Contract Shall Be As Provided By The Laws Of The Republic Of The Philippines. If The Contractor Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. 9. Termination For Other Causes Contract Termination Shall Be Initiated In Case It Is Determined Prima Facie By The Procuring Entity That The Contractor Has Engaged, Before, Or During The Implementation Of The Contract, In Unlawful Deeds And Behaviors Relative To Contract Acquisition And Implementation, Such As, But Not Limited To Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices As Stated In Itb Clause 4. 10. Dayworks Subject To The Guidelines On Variation Order In Annex “e” Of The 2016 Revised Irr Of Ra No. 9184, And If Applicable As Indicated In The Scc, The Dayworks Rates In The Contractor’s Bid Shall Be Used For Small Additional Amounts Of Work Only When The Procuring Entity’s Representative Has Given Written Instructions In Advance For Additional Work To Be Paid For In That Way. 11. Program Of Work 11.1. The Contractor Shall Submit To The Procuring Entity’s Representative For Approval The Said Program Of Work Showing The General Methods, Arrangements, Order, And Timing For All The Activities In The Works. The Submissions Of The Program Of Work Are Indicated In The Scc. 11.2. The Contractor Shall Submit To The Procuring Entity’s Representative For Approval An Updated Program Of Work At Intervals No Longer Than The Period Stated In The Scc. If The Contractor Does Not Submit An Updated Program Of Work Within This Period, The Procuring Entity’s Representative May Withhold The Amount Stated In The Scc From The Next Payment Certificate And Continue To Withhold This Amount Until The Next Payment After The Date On Which The Overdue Program Of Work Has Been Submitted. 12. Instructions, Inspections And Audits The Contractor Shall Permit The Gop Or The Procuring Entity To Inspect The Contractor’s Accounts And Records Relating To The Performance Of The Contractor And To Have Them Audited By Auditors Of The Gop Or The Procuring Entity, As May Be Required. 13. Advance Payment The Procuring Entity Shall, Upon A Written Request Of The Contractor Which Shall Be Submitted As A Contract Document, Make An Advance Payment To The Contractor In An Amount Not Exceeding Fifteen Percent (15%) Of The Total Contract Price, To Be Made In Lump Sum, Or At The Most Two Installments According To A Schedule Specified In The Scc, Subject To The Requirements In Annex “e” Of The 2016 Revised Irr Of Ra No. 9184. 14. Progress Payments The Contractor May Submit A Request For Payment For Work Accomplished. Such Requests For Payment Shall Be Verified And Certified By The Procuring Entity’s Representative/project Engineer. Except As Otherwise Stipulated In The Scc, Materials And Equipment Delivered On The Site But Not Completely Put In Place Shall Not Be Included For Payment. 15. Operating And Maintenance Manuals 15.1. If Required, The Contractor Will Provide “as Built” Drawings And/or Operating And Maintenance Manuals As Specified In The Scc. 15.2. If The Contractor Does Not Provide The Drawings And/or Manuals By The Dates Stated Above, Or They Do Not Receive The Procuring Entity’s Representative’s Approval, The Procuring Entity’s Representative May Withhold The Amount Stated In The Scc From Payments Due To The Contractor. Section V. Special Conditions Of Contract Special Conditions Of Contract Gcc Clause 2 Sectional Completion Is Not Applicable The Intended Completion Date Is Three Hundred Sixty-five (365) Calendar Days From The Date Of Receipt Of The Ntp. 4.1 The Procuring Entity Shall Give Possession Of All Parts Of The Site To The Contractor From The Date Of The Receipt Of Notice To Proceed (ntp). 6 No Further Instructions. 7.2 Fifteen (15) Years. 10 No Dayworks Are Applicable To The Contract. 11.1 The Contractor Shall Submit The Program Of Work To The Procuring Entity’s Representative Within Fourteen (14) Calendar Days After The Issuance Of The Notice To Proceed (ntp) 11.2 The Amount To Be Withheld For Late Submission Of An Updated Program Of Work Is One Tenth Of One Percent Of The Total Contract Price. 13 The Amount Of The Advance Payment Is Fifteen Percent (15%) Of The Contract Price Upon Submission To And Acceptance By The Bureau Of Corrections Of An Irrevocable Standby Letter Of Credit Of Equivalent Value From A Commercial Bank, A Bank Guarantee Or A Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Licensed By The Insurance Commission And Confirmed By The Bureau Of Corrections. 14 The Contractor May Submit A Request For Payment For Work Accomplished. Such Requests For Payment Shall Be Verified And Certified By The Procuring Entity’s Representative/project Engineer. Materials And Equipment Delivered On The Site But Not Completely Put In Place Shall Not Be Included For Payment. 15.1 The Date By Which “as Built” Drawings Are Required Is Upon Actual Completion Of The Project. 15.2 The Amount To Be Withheld For Failing To Produce “as Built” Drawings And/or Operating And Maintenance Manuals By The Date Required Is Equivalent To Five Percent (5%) Of The Contract Price. Section Vi. Specifications Terms Of Reference Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) Sablayan Prison And Penal Farm, Occidental Mindoro 1. Project Information 1.1 Project Description The Mission Of The Bucor Is To Protect Society By Confining Offenders In The Controlled Environments Of Prisons And Community-based Facilities That Are Safe, Humane, Cost-efficient, And Appropriately Secure, And That Provide Self-improvement Opportunities To Assist Offenders In Becoming Law-abiding Citizens. The Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) Shall Be Conducive To The Reformation And Rehabilitation Of Inmates That Will Bring Them Back Into The Mainstream Of Society As Useful Citizens Of The Country. The Contract Will Involve The Design And Build Scheme Leading To The Construction Of The Bureau Of Corrections Super Maximum Prison Facility (2nd Phase) At Sablayan Prison And Penal Farm, Sablayan, Occidental Mindoro. The Plans And Designs Shall Be In Accordance With The Plan Of The Said Structures As Conceptualized By The Bucor Planning And Design Division Or As Conceptualized By The Winning Bidder If The Latter Is Found To Be Superior (as Defined In Section 3.1.1 Of This Tor). Contractors Shall Be Required To Conduct A Bucor Led Site Inspection And Evaluation To Enable The Contractors To Develop Their Proposals Accordingly. The Bureau Of Corrections Shall Not Assume Any Responsibility Regarding Erroneous Interpretations Out Of Any Data Presented By The Contractor. The Bucor Super Maximum Prison Facility (phase 2) Shall Be Constructed As Per Approved Drawings, Specifications, Bill Of Materials, Scope Of Works And The General Contract Conditions Following The Guidelines As Per Annex G Of Irr Of Ra 9184. This Project Aims To Be Completed Within A Year, Aligning With Our Decongestion Program. This Expedited Timeline Underscores Our Commitment To Addressing Urgent Needs Within The Correctional System And Providing Timely Solutions For The High Risk Committed Pdl. The Plans And Designs Shall Be In Accordance With The Plan Of The Said Structures As Conceptualized By The Planning And Design Division (pdd) Under. Contractors Shall Be Required To Conduct A Bucor Led Site Inspection And Evaluation To Enable The Contractors To Develop Their Proposals Accordingly. The Bucor Shall Not Assume Any Responsibility Regarding Erroneous Interpretations Out Of Any Data Presented By The Contractor. The Construction Of Super Maximum-security Facility Shall Be Constructed As Per Approved Drawings, Specifications, Bill Of Materials, Scope Of Works And The General Contract Conditions Following The Guidelines As Per Annex G Of Irr Of Ra 9184. The Project Shall Have The Following Basic Components: A. Complete Detailed Architectural And Engineering Design Plans, Technical Specifications, And Design Calculations For The Construction Of The Project. Such Plans, Designs, And Technical Specifications Shall Be Subject For Review And Approval By The Bucor Pdd. The Design Development And The Contract Documents Phases Of The Design Shall Continue After The Bid Is Awarded. It Shall Likewise Be Subject For Review And Approval By The Director Of Directorate For Engineering Services (des). B. The Bid Shall Be Based On The Conceptual/schematic Design Drawings Prepared By The Bucor Pdd Or That Submitted By The Winning Bidder As Defined In Section 3.1.1 Of This Tor. C. The Contractor Shall Complete The Construction Of The Following Facility Component: I. One (1) Unit 2-storey“type B” Pdl Dormitory At Least 3190 Sq.m (gross Area) Polished Flooring And Sandwich Panel Roofing With The Capacity Of Atleast 340 Pdl, 2 Pdl Per Cell With Double Deck Bunk Bed (160 Cells), 1 Pdl Per Cell With Single Bed (20 Cells). The Dormitory To Include Complete Utilities, Power Supply, Cctv, Water Supply, Fire Protection; • Electrical System: Three-phase Power Line Supply, Connected From The Local Electric Utility (from Main Road/ Source To The Compound. The Power Line Shall Be Used For The Future Development Of The 50 Ha Facility. • Electrical System: Backup Power (three-phase Genset) Supply System With Capacity Not Less Than Total Computed Mva Load, Without Demand Factor (designed To Supply The Dormitory), And To Include Capacitor Bank, If Necessary; • Sewerage And Drainage Systems(pipelines To Cover From Project Site To Nearest Tapping Point); • Water Supply System With Sufficient Pressure To Provide The Water Requirement Of The Psdl. The System Is Oncomposed Of A Cistern Tank, Pumps, And An Overhead Water Storage Tank. Deep Well Source Water System (intake Box, Transmission Pipelines, Pressure Break Tanks, Chlorinator With Tanks And Accessories, Etc.) Whichever Is Deemed Most Suitable For The Facility And Is Authorized By The Lgu. • Fire Protection System (fire & Jockey Pump, Pump House), Fire Detection Alarm System And Fire Suppression Equipment Included In Dormitory. • Cctv Systems: To Install Cctv At Perimeter Fence To Monitor The Inside Compound And Dormitory To Monitor The Hallways And Blind Spots. Ii. 3 Meters Height Concrete Perimeter Security Fence With Concertina Above, To Cover 50 Hectares Area (plastered And Painted Finish); Iii. Primary And Secondary Fence For 1.8 Hectares Compound Including Gates, Catwalk And Post Towers (with Cr And Water Supply) (r.a. 10575 Rule 7). • 4 Meters Height Concrete Primary Perimeter Fence (with Catwalks, Concertina Wirings, Post Tower (with Cr And Water Supply) And Solar Lightings, (ra10575). • Secondary Perimeter Fence (3 Layer Concertina, Steel Mesh) With 300w Integrated Solar Light Every 3 Bays And (to Include Post Towers And Gates); Iv. Road Networks And Culverts • All Entry And Exit Point Of Any Bodies Of Water E.g. Creeks, Canals Shall Be Fenced Culvert By Metal Grills (non-corrosive); • The Project Has An Allocated Budget Sufficient To Cover At Least 1440 Sqm Of Road Construction Within The Prison Facility. While This Budget Allows For Road Development, Prioritization Shall Be Given To The Construction Of Culverts, Both Fenced And Road Culverts, To Ensure Adequate Drainage And Prevent Flooding. These Culverts Are Critical For The Road Leading From The Main Road To The Site, As Well As Along The Perimeter Of The Facility. To Accurately Assess The Project Scope And Design, Bidders Are Required To Conduct A Thorough Site Inspection To Identify And Evaluate All Necessary Culverts." 1.2 Contractual Framework The Contractual Arrangement To Be Used For The Project Is The Design-and-build (db) Scheme. Under This Scheme The Procuring Entity Awards A Single Contract For The Architectural/engineering Design And Construction To A Single Firm, Partnership, Corporation, Joint Venture Or Consortium. The Winning Contractor Shall Consult And Collaborate With The Bucor Pdd For The Preparation Of The Detailed Architectural Design Of The Project. The Detailed Architectural And Engineering Design Shall Be Subject For The Review And Approval By The Bucor Pdd. Contractors Shall Be Required To Conduct A Bucor Led Site Inspection And Evaluation To Enable The Contractors To Develop Their Proposals Accordingly. The Bucor Shall Not Assume Any Responsibility Regarding Erroneous Interpretations Out Of Any Data Presented By The Contractor. The Obligations And Liabilities Of The Contractor And Its Architect Shall Be Joint And Solidary For Purposes Of The Detailed Architectural Design Of The Project In Accordance With Article 1723 Of The Civil Code Of The Philippines And Other Pertinent Laws. The Db Scheme Of Procurement Was Recommended, Endorsed, And Adopted Pursuant To The Annex G Of Irr Of Ra 9184. 2. Scope Of Contract 2.1 Obligations Of The Winning Bidder/contractor A. Render Architectural And Allied Engineering Design Services Including Final Schematic Design Necessary For The Implementation Of The Project. The Allied Engineering Design Services Shall Include, But Shall Not Be Limited To, Design For Architectural, Civil, Structural, Electrical, Mechanical, Plumbing, And Electromechanical. All Drawings Shall Be Generated Using Modern Modeling/drafting Software And Printed On High Quality 20” X 30” Blue Print Paper. B. Undertake Detailed Architectural And Engineering Designs (daeds) Using The Given Data Such As Topographic, Hydrographic And Cross–section Surveys, Geotechnical And Geological Investigation, And Hydrologic Investigation And Initial Schematic Design Or Design Concept Provided By The Bucor Pdd Which Conforms With The Minimum Performance Specifications And Standards (mpss); C. If Applicable, Secure Environmental Clearance Or An “environmental Compliance Certificate (ecc)”. If The Proposed Project Is Considered Outside The Purview Of The Philippine Environmental Impact Statement (eis) System, A Certificate Of Non- Coverage Or Certificate Of Exemption Shall Be Secured. D. The Project Shall Be Constructed According To The Daeds Prepared By The Winning Bidder And Approved By The Bucor And In Compliance With The Mpss As Well As Provided In Rule Vii, Section 7 Of The Irr Of Ra 10575. Likewise, Construction Includes Conformance To The Provisions Pertaining To Buildings Under The Latest Edition Of The Dpwh Standard Specifications For Public Works Structures, Volumes Ii And Iii (blue Book). The Blue Book Prescribes, Among Other Things, The Material Requirements And Construction Requirements For Different Items Of Work, Including The Tests To Be Conducted During Construction By The Dpwh-accredited Testing Laboratory. The Blue Book Incorporates Pertinent Provisions Of The American Society For Testing And Materials (astm) And American Concrete Institute (aci), Among Other Standards, Pertaining To Construction. Attention Shall Be Given To The Relevant Items Of Work In The Following Parts Of The Blue Book: Volume Ii ➢ Part A – Facilities For The Engineer ➢ Part B – Other General Requirements Volume Iii ➢ Part A – Earthwork ➢ Part B – Plain And Reinforced Concrete Works ➢ Part C – Finishing ➢ Part D – Electrical ➢ Part E – Mechanical ➢ Part I – Water Supply ➢ Part J – Flood Control And Drainage ➢ Part I-c – Drainage Works For Materials And Technologies Not Covered By The Blue Book, Or If The Proponent Intends To Use Any New Material/technology Which Is Not Accredited By The Dpwh Bureau Of Research And Standards (brs), The Proponent Shall Submit A Certification From A Recognized Foreign Or International Institution To The Effect That The New Materials Or Technology Meets The Mpss For This Project And Has Been Successfully Used In Existing Structures With Proven Integrity. The Winning Bidder Or Contractor Shall Be Held Liable For Design And Structural Defects And/or Failure Of The Completed Project Within The Warranty Period Specified In Section 62.2 Of The Irr Of Ra 9184; And, F. The Winning Bidder Or Contractor Shall Be Solely Responsible For The Design And Shall Be Held Responsible For Any Default Resulted From Improper Design. Further, Extended Liability Of The Contractor Since It Stipulated That The Works, When Completed, Shall Be Fit For The Purpose For Which It Was Intended As Defined In The Contract. 2.2 Obligations Of The Bucor A. Provide Full Information On All Requirements For The Project; B. Approve The Winning Bidder Or Contractor’s Design Without Diminishing Their Full And Sole Responsibility For The Quality And Integrity Thereof; C. Give Prompt Written Notice Thereof To Winning Bidder Or Contractor, If It Observes Or Becomes Aware Of Any Defect In The Project; D. Designate, When Necessary, Representatives Authorized To Act On Its Behalf. It Shall Examine Documents Submitted By The Winning Bidder Or Contractor And Render Decisions Pertaining Thereto Promptly, To Avoid Unreasonable Delay In The Progress Of Their Work. It Shall Observe The Procedure Of Issuing Orders To The Winning Bidder Or Contractor; E. Supervise And Monitor The Implementation Of The Project; I. Construction Monitoring And Testing Forms: • The Use Of Construction Monitoring And Testing Forms That Will Be Provide By The Bucor - Nhq Pdd Is Mandatory Throughout The Duration Of Construction. • Oversight Of These Forms Will Be Conducted By The Engineering Services (es) Of The Sppf On Behalf Of The Bucor Pdd • Sppf-es To Impose To Contractor Testing Of All Items After Installation And/or Application. Es To Send Pdd Copy Of The Test Report/s. • Sppf-es To Monitor Material Delivery Of Contractor To Ensure All Materials Installed And/or Applied Are In Accordance With The Specifications Stated On Plans And Contract Of This Project. • In Case There Would Be Substitute Or Alternative To The Original Specification Of Material/s, Sppf- Es To Inform Pdd Of Such Variation. Ii. Bucor Engineer Visits: • Nhq Engineers And Architects (personnel Of Pdd) Will Conduct Site Visits On A Quarterly Basis Or Whenever Deemed Necessary To Ensure Compliance With Standards And Regulations. • Pdd Personnel To Witness The Final Testing And Commissioning Of The Systems, Equipment And Utilities Prior To Acceptance Of The Project Or Part Of The Project Thereof. Iii. Progress Billing Payment: • Sppf Es Engineers Will Provide Monthly Updates, Or As Deemed Necessary, On The Statement Of Work Accomplishment Based On The Actual Progress Of The Project, Including Reports Update. F. Pay The Accomplishment Accepted In The Conformance With The Mpss Included Under The Design And Build Contract. I. This Reports And Swa Updates Of The Ippf Es Will Be Reviewed And Approved By Pdd - Nhq Prior To Any Progress Billing Payments Being Made. 2.3 Bidding Documents The Bidding Documents For The Project Shall Govern The Conduct Of The Procurement Of The Project. 3. Scope Of Works 3.1 Planning And Design Phase 3.1.1 Preliminary Architectural Plan (pap) By Bidder The Approved Concept Design Shall Adopt The Provisions Indicated In Rule Vii, Section 7 Of The Irr Of Ra 10575. Bidders Shall Submit Also An Alternative Design Concept With Respect To The Actual Site Condition. This Alternative Design By The Winning Bidder Shall Be Adopted Should The Same Be Found To Be Superior Than The One Conceptualized By The Bucor Pdd. 3.1.2 Detailed Architectural And Engineering Design (daed) By The Winning Bidder During The Implementation Of The Project, The Winning Bidder Shall Prepare The Daed Of The Project And Submit The Same To The Bucor For Approval Prior To The Execution Of The Construction Works. The Winning Bidder Shall Prepare The Daed Based On Its Pap As Reviewed And Accepted By The Bucor Pdd And In Accordance With The Minimum Performance Standards And Specifications (mpss). The Daed Shall Be Undertaken With A Degree Of Accuracy That Will Allow Estimates To Be Made Within Approximately Plus Or Minus Five Percent (+/-5%) Of The Final Quantities. Once Approved By The Bucor, The Winning Bidder’s Daed Shall Form Part Of The Mpss. The Bucor-approved Daed, Together With The Mpss Provisions On Construction Under Section 2.0 Hereof, Shall Govern The Actual Construction Undertaken By The Winning Bidder. The Winning Bidder Shall Undertake The Necessary Field Surveys And Investigation In Accordance With The Dpwh Design Guidelines. In Carrying Out These Works, The Winning Bidder Shall Ensure That The Engineering, Environmental, Particularly During Field Investigations And The Development Of The Preliminary And Final Detailed Engineering Designs. The Winning Bidder Shall Ensure That All Designs Submitted For Approval Have Fully Taken Into Account Key Findings From The Engineering, Environmental, And That Negative Environmental Impacts Have Been Minimized Or Eliminated To The Fullest Extent Possible. 3.1.3 Architectural And Engineering Design Submittals I. Architectural Design A. The Building Should Be Designed With Structural, Electrical, Natural Or Combine Ventilation And Natural Lighting Following Building Design Standards. B. The Prospective Bidder Shall Prepare The Preliminary Architectural Plans In Accordance With The Requirements Of The National Building Code Of The Philippines, Accessibility Law (bp 344) Including All Other Applicable Laws And Local Ordinances. Submittals: (at Suitable Scale On High Quality 20” X 30” Blue Print Paper Minimum Size) 1. Site Development Plan 2. Vicinity Map 3. Perspective 4. Floor Plans 5. Elevations A. Front Elevation B. Rear Elevation C. Right Elevation D. Left Elevation 6. Sections A. Longitudinal Section B. Cross Section 7. Doors & Window Schedule 8. Plans And Details Of Stairs And Ramps 9. Schedule Of Finishes For Floors, Walls And Ceiling 10. Miscellaneous Details Ii. Structural Design A. The Proponent Shall Prepare The Necessary Structural Analysis/calculation And Design Of The Structural Members Of The Building Component In Accordance With The National Building Code Of The Philippines With Its Referral Codes Such As The Latest National Structural Code Of The Philippines. The Design For The Structure Shall Take Into Account, Among Other Things, The Seismic Requirements Of The Area To Determine The Optimum Safety Of The Whole Structure And To Minimize Possible Earthquake Damage. B. On The Basis Of The Data Obtained From The Detailed Site Investigations, Topographical/soil And Survey, Geotechnical Engineering, Foundation Investigation, Material Testing, Survey Of Existing Site Conditions, The Seismic Requirements Of The Area, The Load Requirements Of The Building And Other Investigation Required To Obtain The Data Necessary To Ensure The Safety Of The Structure, The Proposal Shall Prepare The Preliminary Structural Design Plans Of The Structure. Submittals: (at Suitable Scale On High Quality 20” X 30” Blue Print Paper Minimum Size) 1. Structural Design Criteria And Design Notes 2. Foundation Plan 3. Floor Framing Plans 4. Schedule Of Slab, Beams And Girders 5. Schedule Of Columns 6. Schedule Of Footings 7. Structural Details Of Stairs/ramp, If Applicable 8. Roof Framing Plan, If Applicable 9. Schedule And Details Of Trusses, If Applicable 10. Road Design And Details (if Applicable) 11. Miscellaneous Details Iii. Sanitary/plumbing Design A. General • The Detailed Design Shall Conform To The General Standards Adopted By The Sanitary & Plumbing Code Of The Philippines And Other Pertinent Laws And Ordinances. • All Design Considerations/assumptions Shall Be Based On The Results Of The Technical Studies, Detailed Analyses, And Design Computations. • The Technical Drawings And Specifications Shall Clearly Indicate All The Details Required To Ascertain The Care And Thoroughness Devoted In The Preparation Of The Drawings. B. Drainage And Sewerage • The Drainage Layout Shall Show All The Required Information Such As Direction Of Flow, Manhole-to-manhole Distances, And Sizes Of Lines, Manholes/canals, Location Of Outfalls, Etc. • The Prospective Bidder Shall Prepare A Design For The Sewage Treatment Plant In Accordance To The Clean Water Act Of 2004 (republic Act No. 9275) And Other Relevant Laws And Ordinances. Submittals: (at Suitable Scale On High Quality 20” X 30” Blue Print Paper Minimum Size) 1. General Notes 2. Legend & Symbols 3. Sewer, Vent And Storm Drainage Layout 4. Enlarged Toilet Plan For Common And Pwd Toilets 5. Isometric Diagram 6. Miscellaneous Details 7. Drainage And Sewerage System 8. Three Chamber Septic Tank Plans And Details C. Water Supply And Distribution System • The Proponent Shall Carry Out A Preliminary Detailed Design For The Water Supply Of The Project. The Design Should Be On The Basis Of The Source And Volume Of Water Supply, Water Consumption, Piping Network, And Conveyance In Accordance With The Applicable Laws, Rules And Regulations Governing Health, Safety And Sanitation. • The Contractor Shall Install Elevated Water Storage/s Per Unit Located At The Roof Deck Of The Prison Dormitories. (sufficient Capacity To Supply The Pdl) Submittals: (at Suitable Scale On High Quality 20” X 30” Blue Print Paper Minimum Size) 1. General Notes 2. Legend & Symbols 3. Water Line Layout 4. Water Line Isometric Diagram 5. Water Reservoir Plans And Details 6. Miscellaneous Details Iv. Electromechanical Design A. Sewage Treatment Plant • The Prospective Bidder Shall Prepare A Design For The Sewage Treatment Plant In Accordance To The Clean Water Act Of 2004 (republic Act No. 9275) And Other Relevant Laws And Ordinances. Submittals: (at Suitable Scale On High Quality 20” X 30” Blue Print Paper Minimum Size) 1. General Notes 2. Legend & Symbols 3. Electrical System Layout 4. Mechanical System Layout 5. Instrumentation And Control System Diagrams 6. Piping And Instrumentation Diagrams (p&ids) 7. Equipment Details And Specifications 8. Electrical Power Distribution 9. Emergency Power Systems 10. Grounding And Lightning Protection 11. Control And Monitoring Systems, If Applicable 12. Safety Systems 13. Miscellaneous Details B. Fire Protection System • The Prospective Bidder Shall Prepare A Design For The Fire Protection System In Accordance To The Fire Code Of The Philippines, (irr) Of Ra 9514, And Other Relevant Laws And Ordinances. Submittals: (at Suitable Scale On High Quality 20” X 30” Blue Print Paper Minimum Size) 1. Sprinkler System 2. Sprinkler System Isometric Diagram 3. Fire Fighting Piping System Diagram 4. Fire Alarm System Layout 5. Fire Suppression System Layout 6. Smoke Management System Layout 7. Fire Pump And Water Supply 8. Miscellaneous Details V. Electrical Design A. The Prospective Bidder Shall Prepare A Preliminary Design Plan For The Electrical And Power Supply System Of The Building In Accordance With The Electrical Code Of The Philippines, Fire Code Of The Philippines, National Building Code Of The Philippines And Other Relevant Laws And Ordinances. B. The Prospective Bidder Shall Prepare A Design For The Electrical And Power Supply System Considering Ease Of Maintenance And Prevention Of Illegal Connections Including Electrical Supply For Ceiling Fans. C. The Prospective Bidder Shall Prepare A Design For Backup Power Generator With Capacity Not Less Than Total Computed Kva Load Without Demand Factor. D. 3-phase Electrical Supply Shall Be Sourced From The Local Electrical Utility. E. Power Line Connection From Main Source To The Facility Submittals: (at Suitable Scale On High Quality 20” X 30” Blue Print Paper Minimum Size) 1. Power Riser Diagram 2. Power Layout System 3. Lighting Layout System 4. Local Area Network System, If Applicable 5. Grounding System 6. Load Schedules 7. Others As Applicable Vi. Other Requirements  Technical Specifications  Boring Test  Structural Design And Analysis And Computation  Final Design And Construction Plans  Upon Award Of Contract, The Contractor Shall Comply The Following: O Prepare Final Draft Of Architectural And Engineering Design Plans Incorporating All Design Refinements And Revisions Based On Project Requirement Or As May Be Required By The Bucor Pdd Within The Scope Of Design. O Submit To The Bucor Design And Build Committee (bucor-dbc) The Final Architectural And Engineering Design Plans And Specifications Duly Signed And Sealed By The Concerned Professional Architect, Engineers, Incorporating All The Necessary Revisions And Refinements For Approval By The Head Of Procuring Entity. 3.2 Construction Phase The Following Works Shall Comprise This Phase: I. Permits And Clearances, The Contractor Shall Upon Authorization Of The Head Of The Procuring Entity (hope), Make Representations With The Government Agencies Concerned To Expedite The Processing Of The Necessary Permits And Certificates Such As The Following: A. Zoning Certification And Locational Clearance B. Building /electrical/sanitary Permits C. Certificate Of Occupancy D. Environmental Clearance Certificate E. All Other Permits/clearances As May Be Required For The Construction. Ii. Mobilization, The Contractor Shall Mobilize All The Required Project Team Personnel, Equipment, Tools, And Manpower With The Required Skills And In Sufficient Number As May Be Necessary For His Efficient Undertaking Of The Project. Iii. Clearing, Grubbing And Hauling/disposal Of Debris Iv. Construction Stage As A Rule, Contract Implementation Guidelines For Procurement Of Infrastructure Projects Shall Comply With Annex “e” Of The Revised Irr Of Ra 9184. The Following Provisions Shall Supplement These Procedures: I. No Works Shall Commence Unless The Contractor Has Submitted The Prescribed Documentary Requirements And Implementing Unit Has Given Written Approval. Work Execution Shall Be In Accordance With Reviewed And Approved Documents. Ii. The Contractor Shall Be Responsible For Obtaining All Necessary Information As To Risks, Contingencies And Other Circumstances Which May Affect The Works And Shall Prepare And Submit All Necessary Documents Specified By The Implementing Unit To Meet All Regulatory Approvals As Specified In The Contract Documents. Iii. The Contractor Shall Submit A Detailed Program Of Works Within Fourteen (14) Calendar Days After The Issuance Of The Notice To Proceed (ntp) For Approval By The Head Of The Procuring Entity (hope) That Shall Include, Among Others: A. The Order In Which It Tends To Carry Out The Work Including Anticipated Timing For Each Stage Or Design/detailed Engineering And Construction; B. Periods For Review Of Specific Outputs And Any Other Submissions And Approvals; C. Sequence Of Timing For Inspection And Tests; D. General Description Of The Design And Construction Methods To Be Adopted; E. Number Of Personnel To Be Assigned For Each Stage Of The Work; F. List Of Equipment Required On Site For Each Stage Of The Work; And G. Description Of The Quality Control System To Be Utilized For The Project. Iv. Any Errors, Omissions, Inconsistencies, Inadequate Or Failure Submitted By The Contractor That Do Not Comply With The Requirements Shall Be Rectified, Resubmitted And Reviewed At The Contractor’s Cost. If The Contractor Wishes To Modify Any Design Or Document Which Has Been Previously Submitted, Reviewed And Approved, The Contractor Shall Notify The Implementing Unit Within A Reasonable Period Of Time And Shall Shoulder The Cost Of Such Changes. V. As A Rule, Changes In Design And Construction Requirements Shall Be Limited Only To Those That Have Not Been Anticipated In The Contract Signing And Approval. The Following Guidelines Shall Govern Approval For Change Or Variation Order: A. Change Orders Resulting From Design Errors, Omissions Or Non-conformance With The Performance Specifications And Parameters And The Contract Documents By The Contractor Shall Be Implemented By The Contractor At No Additional Cost To The Bureau Of Corrections. B. Provided That The Contractor Suffers Delay And/or Incurs Costs Due To Changes Or Errors In The Preparation Of Performance Specification And Parameters, The Contractor Shall Be Entitled To Either One Of The Following:  An Extension Of Time For Any Such Delays Under Section 10 Of Annex “e” Of Irr-a (ra9184; Or  Payments For Such Cost As Specified In The Contract Documents, Provided That The Cumulative Amount Of The Variation Order Does Not Exceed Ten Percent (10%) Of The Original Project Cost. C. The Contract Documents Shall Include The Manner And Schedule Of Payment Specifying The Estimated Contract Amount And Installments In Which The Contract Will Be Paid. D. The Contractor Shall Be Entitled To Advance Payment Subject To The Provisions Of Section 4 Of Annex “e” Of The Revised Irr Of Ra 9184. E. The Implementing Unit Shall Monitor The Quality Control Procedures For The Design And Construction In Accordance With The Government Guidelines And Shall Issue The Proper Certificates Of Acceptance For Sections Of The Works Or Whole Of The Works As Provided For In The Contract Documents. F. The Contractor Shall Provide All Necessary Equipment, Personnel, Instruments, Documents And Others To Carry Out Specified Tests. G. This Design And Build Project Shall Have Minimum Defects Liability Period Of One (1) Year Contract Completion Or As Provided In The Contract Documents. This Is Without Prejudice To The Liabilities Imposed Upon The Engineer/architect Who Drew Up The Plans And Specification For A Building Sanctioned Under Section 1723 Of The New Civil Code Of The Philippines. H. The Contractor Shall Be Held Liable For Design And Structural Defects And/or Failure Of The Completed Project Within The Warranty Period Of 15 Years For Permanent Structures/buildings And 5 Years For Roads As Specified In Section 62.2.2 Of The Revised Irr Of Ra 9184 V. As-built Plans. The Contractor Shall Cause The Preparation And Submission Of As-built Plans Duly Signed And Sealed By All Concerned Parties Involved In The Construction In The Same Sheet Size And Scale As The Original Drawings In One (1) Blue Print Copy And One (1) Reproducible Copy. Vi. General Requirements: 1. Temporary Facilities Such As Field Offices For The Bucor Inspectorate Team, Project Engineers And Quarters For Laborers; Temporary Warehouse For The Construction Material. 2. Office Furniture And Equipment, Survey Equipment And Consumables 3. Photographs: This Item Consists Of The Supply Of Equipment And Materials, I.e., Album, Necessary To Undertake Photographic Progress Activities Of The Project And Of All Cost Incidental To The Preparation And Submission Of Photographs (at Least 12 Photographs Per Day). The Quantities For Photographs Shall Be One (1) Set Of Photographs Per Month. 4. Health And Safety Program Including Personal Protective Equipment (ppe) A. All Standard Safety Measures And Precautions Shall Be Exercised By The Contractor In The Course Of The Project For The Protection Of The Public And Its Workers And In Conformity With Dole Department Order No. 13, Series Of 1998. B. All Workers Shall Be Equipped With Proper Working Uniform And Identification At All Times. They Must Be Registered With The Governing Bucor Security Office And Must Comply With The Bucor’s Rules And Regulations. C. The Contractor Shall Secure His/her Own Equipment And Materials On Site. The Bucor Shall Not Be Liable To Any Losses Incurred During The Progress Of The Work. 5. Minimum Heavy Equipment Requirement (as Needed) For Site Development Such As: No. Item Specification 1. Backhoe 0.8 Cu. M. 2. Backhoe Wheel Mounted With Breaker 0.90 Cu. M. 3. Cargo/service Truck 2-5 Mt., 160 Hp 4. Dump Truck 12 Cu. Yd. 5. Motorized Road Grader G710a, 140hp 6. Payloader 1.5 Cu. M. 7. Vibrator Roller 10 Mt 8. Bulldozer 170 Hp 9. Scraper 515 Hp 10. Truck Mounted Crane, Hydraulic Telescopic Bommer Capacity: 41 – 45 Mt. 11. Crawler Crane 41-45 Mt 12. Generator Set 300 Kw/375 Kva 13. Water Pump 100mm Suction Dia. 14. One Bagger Mixer 4-6 Ft3/min 15. Concrete Vibrator Ey20, 5hp, 32-70mm 16. Vibro Hammer 45000 Kg-m 17. Excavator 17.5 Kw Or Any Specify Types Of Heavy Equipment Needed For A Site Development Will Be Determined By The Winning Bidder. 6. Environmental Compliance 7. Communication Equipment: This Item Consists Of The Provision Of Communication Equipment. 8. Billboard 9. Traffic Management (if Applicable). Vii. Building Construction 1 Lot One (1) Unit 2-storey“type B” Pdl Dormitory At Least 3190 Sq.m (gross Area) Polished Flooring And Sandwich Panel Roofing With The Capacity Of Atleast 340 Pdl, 2 Pdl Per Cell With Double Deck Bunk Bed (160 Cells), 1 Pdl Per Cell With Single Bed (20 Cells). The Dormitory To Include Complete Utilities, Power Supply, Cctv, Water Supply, Fire Protection; • Electrical System: Three-phase Power Line Supply, Connected From The Local Electric Utility (from Main Road/ Source To The Compound. The Power Line Shall Be Used For The Future Development Of The 50 Ha Facility. • Electrical System: Backup Power (three-phase Genset) Supply System With Capacity Not Less Than Total Computed Mva Load, Without Demand Factor (designed To Supply The Dormitory), And To Include Capacitor Bank, If Necessary; • Sewerage And Drainage Systems(pipelines To Cover From Project Site To Nearest Tapping Point); • Water Supply System With Sufficient Pressure To Provide The Water Requirement Of The Psdl. The System Is Composed Of A Cistern Tank, Pumps, And An Overhead Water Storage Tank. Deep Well Source Water System (intake Box, Transmission Pipelines, Pressure Break Tanks, Chlorinator With Tanks And Accessories, Etc.) Whichever Is Deemed Most Suitable For The Facility And Is Authorized By The Lgu. • Fire Protection System (fire & Jockey Pump, Pump House), Fire Detection Alarm System And Fire Suppression Equipment Included In Dormitory. • Cctv Systems: To Install Cctv At Perimeter Fence To Monitor The Inside Compound And Dormitory To Monitor The Hallways And Blind Spots. 1 Lot 3 Meters Height Concrete Perimeter Security Fence With Concertina Above, To Cover 50 Hectares Area (plastered And Painted Finish); 1 Lot Primary And Secondary Fence For 1.8 Hectares Compound Including Gates, Catwalk And Post Towers (with Cr And Water Supply) (r.a. 10575 Rule 7). • 4 Meters Height Concrete Primary Perimeter Fence (with Catwalks, Concertina Wirings, Post Tower (with Cr And Water Supply) And Solar Lightings, (ra10575). • Secondary Perimeter Fence (3 Layer Concertina, Steel Mesh) With 300w Integrated Solar Light Every 3 Bays And (to Include Post Towers And Gates); 1 Lot Road Networks And Culverts • The Project Has An Allocated Budget Sufficient To Cover At Least 1440 Sqm Of Road Construction Within The Prison Facility. While This Budget Allows For Road Development, Prioritization Shall Be Given To The Construction Of Culverts, Both Fenced And Road Culverts, To Ensure Adequate Drainage And Prevent Flooding. These Culverts Are Critical For The Road Leading From The Main Road To The Site, As Well As Along The Perimeter Of The Facility. • All Entry And Exit Point Of Any Bodies Of Water E.g. Creeks, Canals Shall Be Fenced Culvert By Metal Grills (non-corrosive); • To Accurately Assess The Project Scope And Design, Bidders Are Required To Conduct A Thorough Site Inspection To Identify And Evaluate All Necessary Culverts. A. Material Specifications: A. Floor Finishes • Polished Cement Finish Prison Cell, Hallways, Staircases, And Rooms • Plain Cement Finished - Pathways. • Ramps - Anti Slip Pavers Or Tiles • Crs – Unglazed Ceramic Tiles B. Wall Finishes A. Glazed Wall Tiles - 1.8m Height. B. Plain Cement Plaster Finish - For All Buildings And Facilities C. Ceiling Finishes C. Concrete Steel Decking, If Applicable. – Coated In White Enamel D. Painting D. Semi-gloss Solvent Paint Top Coat (high-end Quality) For Interior And Exterior Walls In Two To Three Coats Application. Apply Concrete Neutralizer For Newly Finished Concrete Surfaces. Use Solvent Primer. E. Varnish Paint Finish With Weather Proof Coating – For Doors And Jambs Branded, High-end Quality (offices, Etc.), All Wooden Doors Must Have Secondary Steel Doors. F. Use Epoxy Paint Primer. Epoxy Paint Finish – For Structural Steel And All Metal Works E. Doors And Windows G. No Doors For Prison Facility Comfort Rooms With 1.20 Meter Finish Wall Height (see Rule Vii, Section 7 R-irr Of Ra 10575). H. Steel Doors And Grills – For Dormitories, Gates And Other Security Areas. Sliding Doors For All Cells (see Rule Vii, Section 7 R-irr Of Ra 10575) F. Waterproofing I. Uv Resistant Polyurethane Waterproofing – For All Roof Deck With Topping Works Provided With Welded Wire Mesh. (at Elevated Water Tank Area) J. Cistern - Polyurethane Waterproofing G. Plumbing Works K. Upvc Pipe Series 1000 – For All Soil, Sewer, Waste, Dry And Wet Vent Piping High-end Quality L. Pprc Fusion Type – For All Water Lines High-end Quality M. Contractor Encouraged To Adapt: Lpf Flush Valve For Water Closet Or Stainless Toilet-lavatory Combination. Waterless Urinals N. Sprinkler System To All Prison Dormitories In Accordance With The Provisions Of Revised Plumbing Code Of The Philippines. O. Contractor To Provide A Water System To Supply The Facility 4. Approved Budget For The Contract (abc) The Approved Budget For The Contract (abc) Is Php 300,000,000. This Is The Ceiling For Acceptable Bids. Bids Higher Than Abc Shall Be Automatically Rejected. 5. Proposed Implementation Schedule (example): No. Of Months 1 2 4 5 6 7 8 9 10 11 12 Design Phase Construction Phase 6. Eligibility Criteria For Bidders 6.1 General The Eligibility Requirements For This Design And Build Project Shall Adopt The Provisions Of Annex “g” Of The Implementing Rules And Regulations Of Ra 9184 (e.g. Eligibility Requirement). However, If A Bidder Who Has No Experience In Db Project On Its Own May Opt To Enter A Subcontracting Agreement, Partnership, Or Joint Venture With A Design Or Engineering Firm For The Design Portion Of The Project. 6.2 Legal Requirements A. Valid Contractor’s License Issued By The Philippine Contractor’s Accreditation Board B. Valid License Of The Contractor’s Designer Issued By The Professional Regulation Commission. 6.3 Technical Requirements A. The Contractor’s Designer Must Have Designed One Structure Similar To The Project At Hand With A Construction Cost Of At Least 50 % Of The Abc. 6.4 Financial Requirements The Contractor Must Have A Net Financial Contracting Capacity (nfcc) At Least Equal To The Abc To Be Bid Or Equivalent To Php300,000,000.00. 7. Contents Of The Bid 7.1 In The First Envelope Class “a” Documents Legal Documents I. Philgeps Certificate Of Registration And Membership In Accordance With Section 8.5.2 Of This Irr. For Procurement To Be Performed Overseas, It Shall Be Subject To The Guidelines To Be Issued By The Gppb. (a) Ii. Pcab License And Registration, In Case Of Jv; 57 Iii. Statement Of All Ongoing Government And Private Contracts; Iv. Statement Of Slcc; V. Nfcc Computation; Vi. Jva, If Applicable; Vii. Bid Security In The Prescribed Form, Amount And Validity Period; Viii. Project Requirements, Which Shall Include The Following: 1. Organizational Chart For The Contract To Be Bid; 2. List Of Contractor’s Personnel (design And Construction), To Be Assigned To The Contract To Be Bid, With Their Complete Qualification And Experience Data; 3. List Of Contractor’s Equipment Units Which Are Owned, Leased And/or Under Purchase Agreements, Supported By Certification Of Availability Of Equipment From Lessor/vendor For The Duration Of The Project. Ix. Omnibus Sworn Statement By The Prospective Bidder Or Its Authorized Representative In The Prescribed Format; X. Submission Of Preliminary Conceptual Design Plans: Class “b” Documents I. For Infrastructure Projects, Jv Bidders Shall Submit A Jva In Accordance With R.a. 4566 And It’s Irr. Ii. Each Partner Of The Joint Venture Shall Submit Their Philgeps Certificates Of Registration In Accordance With Section 8.5.2 Of This Irr. The Submission Of Technical And Financial Eligibility Documents By Any Of The Joint Venture Partners Constitutes Compliance: Provided, That The Partner Responsible To Submit The Nfcc Shall Likewise Submit The Statement Of All Of Its Ongoing Contracts And Audited Financial Statements. 1. Preliminary Conceptual Architectural Design Plans In Accordance With The Degree Of Details Specified By The Procuring Entity: (at Suitable Scale On High Quality A3 Blue Print Paper /digital Print Minimum Size) A. Location Plan/vicinity Map B. Perspective C. Floor Plans D. Front View Elevation E. Rear View Elevation F. Left Side View Elevation G. Right Side View Elevation H. Longitudinal Section I. Transverse Section 2. Design And Construction Method 3. List Of Contractor’s Personnel To Be Assigned To The Contract To Be Bid With Their Complete Qualification And Experience Data And Photocopy Of Their Valid Licenses Issued By The Professional Regulatory Commission (prc), Curriculum Vitae Of Key Staff, Partners Or Principal Officers With A Minimum Work Experience Requirements Set In The Bds; For Design The Key Professionals And The Respective Qualifications Of The Design Personnel Shall Be As Follows: • Principal Architect The Principal Architect Must Be Duly-licensed With At Least Ten (10) Years’ Experience In The Design Of Residential, Government Offices Or Institutional Facilities, And Shall Preferably Be Knowledgeable In The Application Of Rapid Construction Technologies. • Structural Engineer The Structural Engineer Must Be A Duly-licensed Civil Engineer With At Least Ten (10) Years’ Experience In Structural Design And Shall Preferably Be Knowledgeable In The Application Of Rapid Construction Technologies. • Professional Electrical Engineer The Electrical Engineer Must Be A Registered Professional Electrical Engineer With At Least Five (5) Years’ Experience In The Design Of Lighting, Power Distribution, Communication Systems (specifically Structured And Local Area Network Cabling, Pabx), Building Management Systems And Preferably Knowledgeable In Developments In Emergent Efficient Lighting Technologies And Energy Management. • Professional Mechanical Engineer The Mechanical Engineer Must Be A Professional Mechanical Engineer With At Least Five (5) Years In Hvac And Fire Protection Systems And Preferably Knowledgeable In Emergent, Alternative Energy- Efficient Hvac Technologies. • Electronics And Communications Engineer The Electronics And Communications Engineer Must Be Duly-licensed With At Least Ten (5) Years’ Experience In The Design Of Communications Systems, And Preferably Knowledgeable In The Application Of Building Automation And Surveillance Systems. • Sanitary Engineer The Sanitary Engineer Must Be Duly-licensed With At Least Five (5) Years’ Experience In The Design Of Building Water Supply And Distribution, Plumbing, And Preferably Knowledgeable In Waste Water Management/treatment, And Emergent, Alternative Effluent Collection And Treatment System. The Design & Build Contractor May, As Needed And At Its Own Expense, Add Additional Professionals And/or Support Personnel For The Optimal Performance Of All Architectural And Engineering Design Services, As Stipulated In These Terms Of Reference, For The Project. Prospective Bidders Shall Attach Each Individual’s Resume And Prc License Of The (professional) Staff. Design Personnel May Also Be Utilized For The Construction Phase Provided That The Same Meet The Minimum Number Of Years Of Experience In The Construction Of Similar Projects. For Construction Personnel The Key Professionals And The Respective Qualifications Of The Construction Personnel Shall Be As Follows: • Project Manager The Project Manager Shall Be A Licensed Architect Or Engineer With At Least Eight (8) Years Relevant Experience On Similar And Comparable Projects In Different Locations. The Project Manager Should Have A Proven Record Or Managerial Capability Through The Directing/managing Of Major Civil Engineering Works, Including Projects Of A Similar Magnitude. • Project Architect/engineer The Project Architect/engineer Shall Be A Licensed Architect Or Engineer With At Least Five (5) Years’ Experience In Similar And Comparable Projects And Shall Preferably Be Knowledgeable In The Application Of Rapid Construction Technologies. • Materials Engineer (m.e. I) The Materials Engineer Must Be Duly Accredited With The Dpwh And With At Least Five (5) Years’ Experience In Similar And Comparable Projects And Shall Preferably Be Knowledgeable In The Application Of Rapid Construction Technologies. • Electrical Engineer The Electrical Engineer Must Be Duly-licensed With At Least Five (5) Years’ Experience In Similar And Comparable Projects In The Installation Of Lighting, Power Distribution, Communication Systems (specifically Structured And Local Area Network Cabling, Pabx), Building Management Systems. • Mechanical Engineer The Mechanical Engineer Must Be Duly-licensed With At Least Five (5) Years’ Experience In Similar And Comparable Projects In The Installation Of Hvac And Fire Protection. • Sanitary Engineer The Sanitary Engineer Must Be Duly-licensed With At Least Five (5) Years’ Experience In Similar And Comparable Projects In The Installation Of Building Water Supply And Distribution, Plumbing. • Foreman The Foreman Must Have At Least Five (5) Years’ Experience In Similar And Comparable Projects And Shall Preferably Be Knowledgeable In The Application Of Rapid Construction Technologies. • Safety Officer The Safety Officer Must Be An Accredited Safety Practitioner By The Department Of Labor And Employment (dole) And Must Have Undergone The Prescribed Forty (40) Hour Construction Safety And Health Training (cosh) And Must Have At Least Two (2) Years’ Experience. 4. Value Engineering Analysis Of Design And Construction. The Second Envelope (financial Proposal) Shall Contain All The Required Documents For Infrastructure Projects Under Section 25.38 Of The Irr Of R.a 9184. 7.2 In The Second Envelope – Financial Proposal The Contents Of Financial Proposal – In The Second Envelope Shall Be Governed By Section 6.1 Design And Build Scheme Of The Dpwh Procurement Manual Volume Ii - Infrastructure Main Guidelines (2016). A. Lump Sum Bid Prices, Which Shall Include The Detailed Engineering Cost, In The Prescribed Bid Form Inclusive Of Vat B. Detailed Estimates Including A Summary Sheet Indicating The Unit Prices Of Construction Materials, Labor Rates And Equipment Rentals Used In Coming Up With The Bid For The Following: I Detailed Architectural And Engineering Design; Ii Demolition Works; And Iii Building Construction/civil Works. C. Bill Of Quantities D. Cash Flow And Payments Schedule. 8. Procedure And Criteria For Bids Evaluation For The Detailed Evaluation Of The Design And Build Proposals A Two-step Procedure Shall Be Adopted By The Bac, Which May Be Undertaken With The Assistance Of The Dbc. First-step Procedure: With The Assistance Of The Bucor Design And Build Committee (bucor-dbc), The Bac Shall Conduct The Opening, Preliminary Examination And Detailed Evaluation Of The Design And Build Proposals, As Follows: (1) The First Step Of The Evaluation Shall Involve The Review Of The Preliminary Conceptual Designs And Track Record Submitted By The Contract As Indicated In The Bidding Documents Using A Nondiscretionary “pass/fail” Criteria That Involve Compliance With The Following Requirements: A. Performance Specifications And Parameters And Degree Of Details; B. Adherence Of Preliminary Design Plans To The Required Concept Of Approach And Methodology For Detailed Engineering, Design And Construction With Emphasis On The Clarity, Feasibility, Innovativeness And Comprehensiveness Of The Plan Approach, And The Quality Of Interpretation Of Project Problems, Risks, And Suggested Solutions; And C. Quality Of Personnel To Be Assigned To The Project Which Covers Suitability Of Key Staff To Perform The Duties Of The Particular Assignments And General Qualifications And Competence Including Education And Training Of The Key Staff. 8.1 Merit Point Critera For The Bid Evaluation 8.1.1 Adherence To Performance Specifications (35 Points) A. Compliance And Adherence To Specifications: Excellent Compliance (100 Points): The Submission Fully Adheres To All Specified Project Requirements And Regulations, Demonstrating Meticulous Attention To Detail And Comprehensive Understanding Of The Tor. All Drawings And Documentation Are Accurate, Complete, And In Compliance With Relevant Standards. Good Compliance (80 Points): The Submission Largely Complies With Project Specifications And Regulations, With Minor Discrepancies. Drawings And Documentation Are Mostly Accurate And Complete, Meeting The Majority Of Requirements. Acceptable Compliance (70 Points): The Submission Satisfies Most Of The Specified Requirements And Regulations, Albeit With Some Notable Omissions Or Inconsistencies. Drawings And Documentation Are Generally Accurate And Complete, Meeting The Basic Expectations. Some Reservations (50 Points): The Submission Partially Meets The Specified Requirements And Regulations, With Several Notable Deficiencies Or Inconsistencies. There Are Significant Gaps Or Inaccuracies In The Drawings And Documentation, Raising Concerns About Compliance. Serious Reservations (20%) The Submission Falls Significantly Short Of Meeting The Specified Requirements And Regulations, With Major Deficiencies Or Inconsistencies. Drawings And Documentation Lack Essential Details Or Fail To Comply With Key Standards, Casting Doubt On The Bidder's Understanding Of The Project Scope. Unacceptable (0%) The Submission Fails To Comply With The Specified Requirements And Regulations, Lacking Essential Details And Demonstrating A Fundamental Misunderstanding Of The Project Scope. Drawings And Documentation Are Incomplete Or Inaccurate, Indicating A Lack Of Capability To Deliver The Project On Time. B. Functionality And Efficiency: Excellent (100%): The Design Optimally Utilizes Space, Facilitating Efficient Accommodation Of 500 Psdl. Layout And Design Enhance Operational Flow, Demonstrating Exceptional Foresight And Planning. Integration Of Facilities Promotes Smooth Prison Management. Good (80%): The Design Effectively Utilizes Space, With Minor Areas For Improvement In Operational Flow. Layout And Design Contribute To Efficient Prison Management, Meeting Most Functional Requirements. Acceptable (70%): The Design Adequately Utilizes Space, Meeting Basic Requirements For Accommodating 500 Psdl. Layout And Design Support Operational Flow, Though Some Improvements Are Needed For Optimal Functionality. Some Reservations (50%): The Design Partially Optimizes Space Utilization, With Notable Deficiencies In Operational Flow. Layout And Design Hinder Efficient Prison Management, Requiring Significant Adjustments For Improvement. Serious Reservations (20%): The Design Inadequately Utilizes Space, Hindering Accommodation Of 500 Psdl. Layout And Design Severely Impede Operational Flow, Indicating A Lack Of Understanding Of Functional Requirements. Unacceptable (0%): The Design Fails To Optimize Space Utilization, Lacking Consideration For Accommodating 500 Psdl. Layout And Design Pose Significant Obstacles To Efficient Prison Management, Indicating A Fundamental Misunderstanding Of Functional Requirements. C. Safety And Security: Excellent (100%): The Design Features Robust Perimeter Walls, Guard Towers, And Security Features Ensuring Optimal Pdl Containment And Facility Security. Fire Protection And Detection Systems Are Highly Reliable, With Comprehensive Safety Measures For Both Psdl And Staff. Good (80%): The Design Incorporates Effective Perimeter Walls, Guard Towers, And Security Features, With Minor Areas For Enhancement. Fire Protection And Detection Systems Are Reliable, With Adequate Safety Measures For Psdl And Staff. Acceptable (70%) The Design Includes Satisfactory Perimeter Walls, Guard Towers, And Security Features, Meeting Basic Requirements For Pdl Containment And Facility Security. Fire Protection And Detection Systems Are Functional, With Sufficient Safety Measures For Psdl And Staff. Some Reservations (50%): The Design Features Partially Effective Perimeter Walls, Guard Towers, And Security Features, With Notable Deficiencies In Pdl Containment And Facility Security. Fire Protection And Detection Systems Lack Reliability, With Limited Safety Measures For Psdl And Staff. Serious Reservations (20%): The Design Lacks Effective Perimeter Walls, Guard Towers, And Security Features, Compromising Pdl Containment And Facility Security. Fire Protection And Detection Systems Are Inadequate, Posing Significant Risks To Psdl And Staff Safety. Unacceptable (0%): The Design Neglects Perimeter Walls, Guard Towers, And Security Features, Failing To Ensure Pdl Containment And Facility Security. Fire Protection And Detection Systems Are Absent Or Non-functional, Posing Severe Risks To Psdl And Staff Safety. D. Sustainability And Environmental Considerations: Excellent (100%): The Design Includes Robust Safety Measures And Emergency Protocols, Ensuring The Safety And Well-being Of Psdl And Staff In Accordance With Ra 10575. Good (80%): The Design Integrates Sustainable Design Principles Effectively, With Minor Opportunities For Improvement In Energy Efficiency And Material Selection. Sewage Treatment And Water Conservation Measures Are Adequate, Supporting Environmental Sustainability. Acceptable (70%) The Design Includes Basic Sustainable Design Principles, Meeting Minimum Requirements For Energy Efficiency And Material Selection. Sewage Treatment And Water Conservation Measures Are Functional, Contributing To Environmental Sustainability. Some Reservations (50%): The Design Partially Incorporates Sustainable Design Principles, With Notable Deficiencies In Energy Efficiency And Material Selection. Sewage Treatment And Water Conservation Measures Lack Comprehensiveness, Limiting Environmental Sustainability. Serious Reservations (20%): The Design Lacks Consideration For Sustainable Design Principles, Neglecting Energy Efficiency And Eco-friendly Materials. Sewage Treatment And Water Conservation Measures Are Insufficient, Undermining Environmental Sustainability. Unacceptable (0%): The Design Disregards Sustainable Design Principles, Showing No Commitment To Energy Efficiency Or Eco-friendly Materials. Sewage Treatment And Water Conservation Measures Are Absent Or Inadequate, Disregarding Environmental Sustainability. E. Aesthetics And Architectural Design: Excellent (100%): The Design Exhibits Exceptional Aesthetic Appeal And Architectural Coherence, Showcasing Innovative And Visually Pleasing Elements. Consideration Of Local Architectural Vernacular And Contextual Integration Is Evident, Contributing To The Overall Excellence Of The Design. Good (80%): The Design Demonstrates Good Aesthetic Appeal And Architectural Coherence, With Some Areas For Enhancement In Creativity And Visual Impact. Consideration Of Local Architectural Vernacular And Contextual Integration Is Apparent, Enriching The Design. Acceptable (70%): The Design Achieves Acceptable Aesthetic Appeal And Architectural Coherence, Meeting Basic Expectations For Visual Presentation. Consideration Of Local Architectural Vernacular And Contextual Integration Is Present, Though Limited In Scope. Some Reservations (50%): The Design Lacks Significant Aesthetic Appeal And Architectural Coherence, With Notable Deficiencies In Creativity And Visual Impact. Consideration Of Local Architectural Vernacular And Contextual Integration Is Minimal, Detracting From The Overall Quality Of The Design. Serious Reservations (20%): The Design Exhibits Poor Aesthetic Appeal And Architectural Coherence, Failing To Engage Visually Or Inspire Interest. Consideration Of Local Architectural Vernacular And Contextual Integration Is Lacking, Diminishing The Design's Relevance And Appropriateness. Unacceptable (0%): The Design Lacks Any Aesthetic Appeal Or Architectural Coherence, Showing No Effort To Engage Visually Or Integrate With The Local Architectural Vernacular. Consideration Of Contextual Integration Is Absent, Rendering The Design Unsuitable For The Project. 8.1.2 Approach And Methodology For Detailed Engineering, Design, And Construction (40 Points) Excellent (100%): The Concept Of Approach And Methodology For Detailed Engineering, Design, And Construction Is Exceptionally Clear, Feasible, Innovative, And Comprehensive. The Plan Demonstrates A High Level Of Understanding Of Project Problems, Risks, And Suggested Solutions, With Well-defined Strategies For Addressing Them. Good (80%): The Concept Of Approach And Methodology For Detailed Engineering, Design, And Construction Is Clear, Feasible, And Comprehensive, With Some Innovative Elements. The Plan Adequately Addresses Project Problems, Risks, And Suggested Solutions, Though Some Areas May Require Further Development. Acceptable (70%): The Concept Of Approach And Methodology For Detailed Engineering, Design, And Construction Satisfactorily Addresses Project Requirements, With A Basic Level Of Clarity And Feasibility. The Plan Outlines Strategies For Addressing Project Problems, Risks, And Suggested Solutions, Meeting The Minimum Expectations. Some Reservations (50%): The Concept Of Approach And Methodology For Detailed Engineering, Design, And Construction Partially Addresses Project Requirements, With Notable Gaps In Clarity And Feasibility. The Plan Lacks Innovative Elements And May Inadequately Address Project Problems, Risks, And Suggested Solutions. Serious Reservations (20%): The Concept Of Approach And Methodology For Detailed Engineering, Design, And Construction Demonstrates Significant Deficiencies In Clarity, Feasibility, And Comprehensiveness. The Plan Fails To Adequately Address Project Problems, Risks, And Suggested Solutions, Indicating A Lack Of Understanding Or Inadequate Planning. Unacceptable (0%): The Concept Of Approach And Methodology For Detailed Engineering, Design, And Construction Is Unclear, Infeasible, And Lacks Comprehensiveness. The Plan Fails To Address Project Problems, Risks, And Suggested Solutions, Indicating A Fundamental Misunderstanding Or Disregard For Project Requirements. 8.1.3 Quality Of Personnel Assigned To The Project (25 Points) Excellent (100%): The Personnel Assigned To The Project, Including Key Staff, Are Highly Suitable And Competent To Perform Their Duties. Key Staff Members Possess Exceptional Qualifications, Competence, Education, And Training Relevant To Their Roles, Demonstrating A High Level Of Expertise And Experience. Good (80%): The Personnel Assigned To The Project, Including Key Staff, Are Suitable And Competent To Perform Their Duties Effectively. Key Staff Members Possess Relevant Qualifications, Competence, Education, And Training, Demonstrating Solid Expertise And Experience. Acceptable (70%): The Personnel Assigned To The Project, Including Key Staff, Meet The Basic Requirements For Suitability And Competence In Performing Their Duties. Key Staff Members Possess General Qualifications And Competence, Education, And Training Relevant To Their Roles, Meeting The Minimum Expectations. Some Reservations (50%): The Personnel Assigned To The Project, Including Key Staff, Demonstrate Some Suitability And Competence In Performing Their Duties, But Notable Deficiencies Are Present. Key Staff Members May Lack Certain Qualifications, Competence, Education, Or Training, Raising Concerns About Their Ability To Effectively Fulfill Their Roles. Serious Reservations (20%): The Personnel Assigned To The Project, Including Key Staff, Exhibit Significant Deficiencies In Suitability And Competence To Perform Their Duties. Key Staff Members Lack Essential Qualifications, Competence, Education, Or Training, Indicating A Lack Of Expertise Or Experience Relevant To Their Roles. Unacceptable (0%): The Personnel Assigned To The Project, Including Key Staff, Are Unsuitable And Incompetent To Perform Their Duties Effectively. Key Staff Members Lack The Necessary Qualifications, Competence, Education, And Training, Demonstrating A Fundamental Mismatch With The Requirements Of Their Roles. 8.2 Determination Of The Merit Point Score The Aggregate Of The Scores In Each Criterion Must Be 70% Or More To Pass Using The Following Formula In Equation. Description Weight (w) Rating (r) Criteria 1 35% (smax/sact) Criteria 2 40% Sact Criteria 3 25% Sact Smax = Η (100) Sact = R1 +r2 +r3 + . . .(rη) Where Η = Number Of Sub Criteria R = Rating Given To The Criteria/sub Criteria The Actual Score (sact) For Each Of The Criteria/sub Criteria Is Obtained By Adding All The Given Rating. (smax) Is The Summation Of Maximum Score Per Criteria 8.3 Passing Rate The Specific Passing Rate Value Depends On The Specific Context Of The Project, The Priorities Of The Design And Build Committee, And The Complexity Of The Requirements Outlined In Ra 10575. Based On The Provided Criteria And Descriptions, The Passing Rate For The Merit Point Criteria (mpc) Could Be Set At 75%. This Means That Bidders Must Score At Least 75% Or Higher In The Evaluation Process To Be Considered As Meeting The Minimum Requirements For The Project A. Pass Rate Per Criteria Will Be Determined Using The Formula: Score = W1*r1 + W2*r2 + W3*r3 B. A Bid Or Technical Bid That Failed In Any Of The Criteria’s Will Not Be Considered For Further Evaluation C. Score Above 75% Will Be Considered As Technically Responsive. Aggregate Score Of Less Than 75% Will Be Considered Failed, And May Be Rejected On That Basis. Second-step Procedure: Only Those Bids That Passed The Above Criteria Shall Be Subjected To The Second Step Of Evaluation. The Bac Shall Open The Financial Proposal Of Each “passed” Bidder And Shall Evaluate It Using Non-discretionary Criteria – Including Arithmetical Corrections For Computational Errors – As Stated In The Bidding Documents, And Thus Determine The Correct Total Calculated Prices. The Bac Shall Automatically Disqualify Any Total Calculated Bid Price Which Exceeds The Abc 9. Data To Be Provided By The Bucor These Data Are For Reference Only And Does Not Guarantee The Contractor That The Data Provided Are Correct, Free From Error, And Applicable To The Project At Hand. The Contractor Is Responsible For The Accuracy Or Applicability Of Any Data That He Will Use In His Design– Build Proposal And Services. Sample Data For Buildings: A. Conceptual Plans 10. Documents To Be Provided By The Contractor During Contract Implementation A. Detailed Architectural And Engineering Plans B. Design Analysis C. Survey Data D. Quantity Calculation E. Detailed Geotechnical Investigation Report F. Design Report. G. As-built Plans, (printed Including Cad Files And Bim Files (lod 500) H. Other Relevant Documents 11. Design And Build Period The Winning Bidder Shall Commence Actual Works Upon The Issuance By The Bucor Of The Notice To Proceed (ntp). The Winning Bidder Shall Complete The Daed And Submit Within The Ninety (60) Calendar Days (cds) Period To The Bucor For Review And Approval. The Contractor Shall Complete The Construction Of The Building Within 305 Cds For The Total Contract Duration Of 365 Cd. Conforme: Name Of Company In Print Signature Over Printed Name Of Authorized Representative/date Section Vii. Drawings The Conceptual Drawings Should Be Attached To This Section Or Annexed In A Separate Folder As Part Of The First Envelope (technical Component Envelope). Preliminary Conceptual Architectural Design Plans In Accordance With The Degree Of Details Specified By The Procuring Entity: At Suitable Scale On High Quality A3 Blue Print Paper /digital Print Minimum Size) 1. Location Plan/vicinity Map 2. Perspective 3. Floor Plans 4. Front View Elevation 5. Rear View Elevation 6. Left Side View Elevation 7. Right Side View Elevation 8. Longitudinal Section 9. Transverse Section Section Viii. Bill Of Quantities The Bill Of Quantities Should Be Attached To This Section As Part Of The Second Envelope (financial Component Envelope). Section Ix. Checklist Of Technical And Financial Documents Checklist Of Technical And Financial Documents I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages) In Accordance With Section 8.5.2 Of The Irr; Technical Documents ⬜ (b) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (c) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided Under The Rules; And ⬜ (d) Special Pcab License In Case Of Joint Ventures And Registration For The Type And Cost Of The Contract To Be Bid; And ⬜ (e) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission Or Original Copy Of Notarized Bid Securing Declaration; And (f) Project Requirements, Which Shall Include The Following: ⬜ A. Organizational Chart For The Contract To Be Bid; ⬜ B. List Of Contractor’s Key Personnel (e.g., Project Manager, Project Engineers, Materials Engineers, And Foremen), To Be Assigned To The Contract To Be Bid With Their Complete Qualification And Experience Data And Photocopy Of Their Valid Licenses Issued By The Professional Regulatory Commission (prc) And Curriculum Vitae Of Key Staff, Partners Or Principal Officers With A Minimum Work Experience Requirements Set In The Bds; ⬜ C. List Of Contractor’s Major Equipment Units, Which Are Owned, Leased, And/or Under Purchase Agreements, Supported By Proof Of Ownership Or Certification Of Availability Of Equipment From The Equipment Lessor/vendor For The Duration Of The Project, As The Case May Be; And ⬜ (g) Original Duly Signed Omnibus Sworn Statement (oss); And If Applicable, Original Notarized Secretary’s Certificate Or Board Resolution/partnership Resolution In Case Of A Corporation, Partnership, Or Cooperative; Or Original Notarized Special Power Of Attorney In Case Of Sole Proprietorship Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. And ⬜ (h) Conformity With The Technical Specifications (scope Of Work); And ⬜ (i) Preliminary Conceptual Architectural Design Plans In Accordance With The Degree Of Details Specified By The Procuring Entity: (at Suitable Scale On High Quality A3 Blue Print Paper /digital Print Minimum Size) 1. Location Plan/vicinity Map 2. Perspective 3. Floor Plans 4. Front View Elevation 5. Rear View Elevation 6. Left Side View Elevation 7. Right Side View Elevation 8. Longitudinal Section 9. Transverse Section ⬜ (j) Design And Construction Method And ⬜ (k) Value Engineering Analysis Of The Design And Construction Method. And Financial Documents ⬜ (l) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc) At Least Equal To The Abc. And Class “b” Documents ⬜ (m) Jv Bidders Shall Submit A Jva In Accordance With R.a. 4566 And Its Irr. Each Partner Of The Joint Venture Shall Submit Their Respective Philgeps Certificates Of Registration In Accordance With Section 8.5.2 Of This Irr. The Submission Of Technical And Financial Eligibility Documents By Any Of The Joint Venture Partners Constitutes Compliance: Provided, That The Partner Responsible To Submit The Nfcc Shall Likewise Submit The Statement Of All Of Its Ongoing Contracts And Audited Financial Statements. Ii. Financial Component Envelope ⬜ (n) Original Of Duly Signed And Accomplished Financial Bid Form; And Other Documentary Requirements Under Ra No. 9184 ⬜ (o) Original Of Duly Signed Bid Prices In The Bill Of Quantities; And ⬜ (p) Duly Accomplished Detailed Estimates Form, Including A Summary Sheet Indicating The Unit Prices Of Construction Materials, Labor Rates, And Equipment Rentals Used In Coming Up With The Bid; And ⬜ (q) Cash Flow And Payment Schedule. Bidding Form Company Letterhead Statement Of Ongoing Government & Private Contracts Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) At Sablayan Prison And Penal Farm (sppf) Statement Of All Its Ongoing Government And Or Private Contracts Including Contracts Awarded But Not Yet Started, If Any Whether Similar Or Not Similar In Nature. Name Of Contract Date Of Contract Contract Duration Owner’s Name And Address Nature Of Work Contractor’s Role (whether Sole Contractor, Subcontractor, Or Partner In A Jv) And Percentage Of Participation Total Contract Value At Award Date Of Completion Or Estimated Completion Time Value Of Outstanding Works Certified Correct: Name And Signature Of Authorized Representative Position Date Company Letterhead Statement Of Single Largest Completed Contract Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) At Sablayan Prison And Penal Farm (sppf) Statement Of Single (1) Largest Completed Contract Of Similar In Nature Within The Last Six (6) Years From The Date Of Submission And Receipt Of Bids Amounting To At Least Fifty Percent (50%) Of The Approved Budget Of The Contract (abc) Name Of Contract Date Of Contract Contract Duration Owner’s Name And Address Nature Of Work Contractor’s Role (whether Sole Contractor, Subcontractor, Or Partner In A Jv) And Percentage Of Participation Total Contract Value At Award Amount Of Completed Contracts, Adjusted By The Bidder To Current Prices Using Psa’s Consumer Price Index, If Necessary Date Of Completion Or Estimated Completion Time Certified Correct: Name And Signature Of Authorized Representative Position Date Company Letterhead Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) At Sablayan Prison And Penal Farm (sppf) Republic Of The Philippines) City Of _______________________) S.s. X------------------------------------------------------x Bid Securing Declaration Invitation To Bid: [insert Reference Number] To: Bureau Of Corrections I/we, The Undersigned, Declare That: 1. I/we Understand That, According To Your Conditions, Bids Must Be Supported By A Bid Security, Which May Be In The Form Of A Bid-securing Declaration. 2. I/we Accept That: (a) I/we Will Be Automatically Disqualified From Bidding For Any Contract With Any Procuring Entity For A Period Of Two (2) Years Upon Receipt Of Your Blacklisting Order; And, (b) I/we Will Pay The Applicable Fine Provided Under Section 6 Of The Guidelines On The Use Of Bid Securing Declaration, Within Fifteen (15) Days From Receipt Of The Written Demand By The Procuring Entity For The Commission Of Acts Resulting To The Enforcement Of The Bid Securing Declaration Under Sections 23.1(b), 34.2, 40.1 And 69.1, Except 69.1(f), Of The Irr Of Ra 9184; Without Prejudice To Other Legal Action The Government May Undertake. 3. I/we Understand That This Bid Securing Declaration Shall Cease To Be Valid On The Following Circumstances: (a) Upon Expiration Of The Bid Validity Period, Or Any Extension Thereof Pursuant To Your Request; (b) I Am/we Are Declared Ineligible Or Post-disqualified Upon Receipt Of Your Notice To Such Effect, And (i) I/we Failed To Timely File A Request For Reconsideration Or (ii) I/we Filed A Waiver To Avail Of Said Right; (c) I Am/we Are Declared The Bidder With The Lowest Calculated Responsive Bid, And I/we Have Furnished The Performance Security And Signed The Contract. In Witness Whereof, I/we Have Hereunto Set My/our Hand/s This ____ Day Of [month] [year] At [place Of Execution]. ______________________________________________________ [insert Name Of Bidder’s Authorized Representative] _____________________________ [insert Signatory’s Legal Capacity] Affiant Subscribed And Sworn To Before Me This ___ Day Of [month] [year] At [place Of Execution], Philippines. Affiant/s Is/are Personally Known To Me And Was/were Identified By Me Through Competent Evidence Of Identity As Defined In The 2004 Rules On Notarial Practice (a.m. No. 02-8-13-sc). Affiant/s Exhibited To Me His/her [insert Type Of Government Identification Card Used], With His/her Photograph And Signature Appearing Thereon, With No. ____________ Issued On ______________ At ___________________________________. Witness My Hand And Seal This ___ Day Of [month] [year]. Name Of Notary Public Serial No. Of Commission _______________ Notary Public For _______ Until __________ Roll Of Attorneys No. __________________ Ptr No. ______ [date Issued], [place Issued] Ibp No. ______ [date Issued], [place Issued Doc. No. _____ Page No. _____ Book No. _____ Series Of ____ Company Letterhead Omnibus Sworn Statement Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) At Sablayan Prison And Penal Farm (sppf) _________________________________________________________________________ Republic Of The Philippines ) City/municipality Of ______ ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. [select One, Delete The Other:] [if A Sole Proprietorship:] I Am The Sole Proprietor Or Authorized Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; 2. [select One, Delete The Other:] [if A Sole Proprietorship:] As The Owner And Sole Proprietor, Or Authorized Representative Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) Of The Bureau Of Corrections, As Shown In The Attached Duly Notarized Special Power Of Attorney; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) Of The Bureau Of Corrections, As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g., Duly Notarized Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney, Whichever Is Applicable;)]; 3. [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. [name Of Bidder] Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. [select One, Delete The Rest:] [if A Sole Proprietorship:] The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Partnership Or Cooperative:] None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Corporation Or Joint Venture:] None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. [name Of Bidder] Complies With Existing Labor Laws And Standards; And 8. [name Of Bidder] Is Aware Of And Has Undertaken The Responsibilities As A Bidder In Compliance With The Philippine Bidding Documents, Which Includes: A. Carefully Examining All Of The Bidding Documents; B. Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C. Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D. Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase). 9. [name Of Bidder] Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code. In Witness Whereof, I Have Hereunto Set My Hand This __ Day Of ___, 2024 At ____________, Philippines. _____________________________________ Bidder’s Representative/authorized Signatory Affiant Subscribed And Sworn To Before Me This ___ Day Of [month] [year] At [place Of Execution], Philippines. Affiant/s Is/are Personally Known To Me And Was/were Identified By Me Through Competent Evidence Of Identity As Defined In The 2004 Rules On Notarial Practice (a.m. No. 02-8-13-sc). Affiant/s Exhibited To Me His/her [insert Type Of Government Identification Card Used], With His/her Photograph And Signature Appearing Thereon, With No. ____________ And Issued On ____________________ At _____________________. Witness My Hand And Seal This ___ Day Of [month] [year]. Name Of Notary Public Serial No. Of Commission _______________ Notary Public For _______ Until __________ Roll Of Attorneys No. __________________ Ptr No. ______ [date Issued], [place Issued] Ibp No. ______ [date Issued], [place Issued] Doc. No. _____ Page No. _____ Book No. _____ Series Of _____ Company Letterhead Certificate Of Net Financial Contracting Capacity Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) At Sablayan Prison And Penal Farm (sppf) (please Show Figures At How You Arrived At The Nfcc) This Is To Certify That Our Net Financial Contracting Capacity (nfcc) Is _____________________ (p____________) Which Is At Least Equal To The Total Ceiling Price We Are Bidding. The Amount Is Computed As Follows: (please Show Computation Of Nfcc) Nfcc = (ca-cl) (15) – C Where: Ca = Current Assets Cl = Current Liabilities C = Value Of All Outstanding Or Uncompleted Portions Of The Projects Under Going Contracts, Including Awarded Contracts Yet To Be Started Coinciding With The Contract For This Project Note: The Values Of The Bidder’s Current Assets And Current Liabilities Shall Be Based On The Audited Financial Statement Submitted To The Bir. Issued This _________________day Of ________________, 2024 _______________________________________________ Name & Signature Of Authorized Representative ____________________ Position _______________ Date Company Letterhead Bid Form Date: Ib No: To Bids And Awards Committee Bureau Of Corrections Nbp Reservation Muntinlupa City We, The Undersigned, Declare That: (a) We Have Examined And Have No Reservation To The Bidding Documents, Including Addenda, For The Contract Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) At Sablayan Prison And Penal Farm (sppf) (b) We Offer To Execute The Works For This Contract In Accordance With The Bid And Bid Data Sheet, General And Special Conditions Of Contract Accompanying This Bid; The Total Price Of Our Bid, Excluding Any Discounts Offered Below Is: ________________________________________₱_________________; The Discounts Offered And The Methodology For Their Application Are: [insert Information]; (c) Our Bid Shall Be Valid For A Period Of 120 Calendar Days From The Date Fixed For The Bid Submission Deadline In Accordance With The Bidding Documents, And It Shall Remain Binding Upon Us And May Be Accepted At Any Time Before The Expiration Of That Period; (d) If Our Bid Is Accepted, We Commit To Obtain A Performance Security In The Amount Of 30% Percent Of The Contract Price For The Due Performance Of The Contract; (e) Our Firm, Including Any Subcontractors Or Suppliers For Any Part Of The Contract, Have Nationalities From The Following Eligible Countries; (f) We Are Not Participating, As Bidders, In More Than One Bid In This Bidding Process, Other Than Alternative Offers In Accordance With The Bidding Documents; (g) Our Firm, Its Affiliates Or Subsidiaries, Including Any Subcontractors Or Suppliers For Any Part Of The Contract, Has Not Been Declared Ineligible By The Funding Source; (h) We Understand That This Bid, Together With Your Written Acceptance Thereof Included In Your Notification Of Award, Shall Constitute A Binding Contract Between Us, Until A Formal Contract Is Prepared And Executed; And (i) We Understand That You Are Not Bound To Accept The Lowest Calculated Bid Or Any Other Bid That You May Receive. (j) We Likewise Certify/confirm That The Undersigned, Is The Duly Authorized Representative Of The Bidder, And Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For The Design And Build Of Bureau Of Corrections Supermaximum Prison Facility (2nd Phase) Of The Bureau Of Corrections. (k) We Acknowledge That Failure To Sign Each And Every Page Of This Bid Form, Including The Bill Of Quantities, Shall Be A Ground For The Rejection Of Our Bid. Name: In The Capacity Of: Signed: Duly Authorized To Sign The Bid For And On Behalf Of: Date: ___________