Cable Tenders

Details: Description Invitation To Bid For The Supply And Delivery Of Various Common-used Office Supplies 1. The Department Of Agriculture - Regional Field Office 1 (da-rfo 1), Through The Gaa Fy 2025 Intends To Apply The Sum Of Six Million Two Hundred Ninety-four Thousand One Hundred Twenty-two Pesos And Fifty Centavos (php6,294,122.50) Being The Approved Budget For The Contract (abc) To Payment Under The Contract For The Supply And Delivery Of Various Common-used Office Supplies With Project Identification Number Da-rfo 1-2025-goods-033. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Da-rfo 1 Now Invites Bids For The Above-mentioned Procurement Project With The Following Details And Minimum Specifications, To Wit: Item No. Specifications Qty. Unit Unit Cost Total Cost 1 Automatic Voltage Regulator (avr), 3000w 4 Unit 5,500.00 22,000.00 2 Battery Charger For Aa & Aaa, With Aa Rechargeable Battery 54 Pc 1,700.00 91,800.00 3 Battery, Aa, Alkaline, 4pcs/pack 132 Pack 90.00 11,880.00 4 Battery, Aa, Rechargeable 2pcs/pack (2450 Mah) 63 Pack 700.00 44,100.00 5 Battery, Aaa, Alkaline 4pcs/pack 141 Pack 120.00 16,920.00 6 Battery, Aaa, Rechargeable 2pcs/pack (800 Mah) 9 Pack 500.00 4,500.00 7 Cfl Bulb 18 Watts 59 Pc 200.00 11,800.00 8 Extension Outlet 4 Gang W/ Switch (1.5m) 18 Unit 950.00 17,100.00 9 Flashlight, Rechargeable 5 Pc 400.00 2,000.00 10 Laser Pointer Presenter 7 Pc 800.00 5,600.00 11 Led, Lightbulb (daylight 9 Watt) 70 Pc 200.00 14,000.00 12 Tape, Electrical, 19mm X 16mm 32 Pc 60.00 1,920.00 13 Universal Extension Wheel (10m) 12 Unit 2,200.00 26,400.00 14 Universal Outlet Extension Cord, 6 Gang W/ Switch, 2-3 Meters Cord Length 17 Unit 1,200.00 20,400.00 15 Alcohol (500ml, Isoprophyl 70%) 343 Bot 110.00 37,730.00 16 Alcohol (gal, Isoprophyl 70%) 46 Gal 600.00 27,600.00 17 Ballpen, 0.5mm, Fine Black 4193 Pc 10.00 41,930.00 18 Ballpen, 0.5mm, Fine Blue 2616 Pc 10.00 26,160.00 19 Ballpen, 0.5mm, Fine Red 139 Pc 10.00 1,390.00 20 Ballpen, 0.7mm, Fine, Black 1188 Pc 12.00 14,256.00 21 Ballpen, 0.7mm, Fine, Blue 1142 Pc 12.00 13,704.00 22 Ballpen, 0.7mm, Fine, Red 50 Pc 12.00 600.00 23 Ballpen, Bp-s Fine, Black 679 Pc 25.00 16,975.00 24 Ballpen, Bp-s Fine, Blue 406 Pc 25.00 10,150.00 25 Ballpen, Bp-s Fine, Red 174 Pc 25.00 4,350.00 26 Bank Envelope (11 X 7 Inch) 75 Pc 3.50 262.50 27 Bond Paper, (11"x17") Tabloid Size, Subs 24 / 80 Gsm 20 Ream 550.00 11,000.00 28 Bond Paper, (8.5x11) Letter, Subs 20 / 70 Gsm 78 Ream 280.00 21,840.00 29 Bond Paper, (8.5x11) Letter, Subs 24 / 80 Gsm 49 Ream 320.00 15,680.00 30 Bond Paper, (8.5x13) Legal, Subs 20 / 70 Gsm 686 Ream 300.00 205,800.00 31 Bond Paper, (8.5x13) Legal, Subs 24 / 80 Gsm 490 Ream 350.00 171,500.00 32 Bond Paper, A3, Subs. 20 / 70 Gsm 50 Ream 465.00 23,250.00 33 Bond Paper, A3, Subs. 24 / 80 Gsm 20 Ream 530.00 10,600.00 34 Bond Paper, A4, Subs 20 / 70 Gsm 904 Ream 290.00 262,160.00 35 Bond Paper, A4, Subs 24 / 80 Gsm 558 Ream 330.00 184,140.00 36 Book Ends, Metal 5 Pair 200.00 1,000.00 37 Carbon Paper, Long 2 Pack 195.00 390.00 38 Cartolina, White, 20pcs/pack 15 Pack 90.00 1,350.00 39 Certificate Holder, A4 Size W/ Plastic Cover 623 Pc 50.00 31,150.00 40 Clear Folder, Morocco Long, Blue 30 Book 22.00 660.00 41 Clear Folder, Morocco Short, Blue 10 Book 20.00 200.00 42 Clearbook Refil, 20 Holes, 10pcs/pack 10 Pack 50.00 500.00 43 Clip Board, Data Board. 8.5"x11" 22 Pc 90.00 1,980.00 44 Clip Board, Data Board. 8.5"x13" 148 Pc 100.00 14,800.00 45 Clip, Bulldog 2" 344 Pc 8.00 2,752.00 46 Clip, Bulldog 3'' 324 Pc 15.00 4,860.00 47 Colored Paper 8 1/2 X 11" 10's/pack 22 Pack 30.00 660.00 48 Colored Paper, A4, Light Blue 37 Ream 200.00 7,400.00 49 Columnar Notebook, 10 Cols 10 Pad 35.00 350.00 50 Columnar Notebook, 12 Cols 18 Pad 35.00 630.00 51 Construction Paper (assorted) 10 Sheets Per Pack 40 Pack 30.00 1,200.00 52 Corkboard, 2x3 Ft 2 Pc 900.00 1,800.00 53 Corkboard, 3ft X 4 Ft 1 Pc 2,000.00 2,000.00 54 Correction Pen 70 Pc 20.00 1,400.00 55 Correction Tape 5mm X 8m 562 Pc 30.00 16,860.00 56 Cotton (500 Grams) 1 Roll 150.00 150.00 57 Crayons, 8 Colors 12 Pack 20.00 240.00 58 Cutter Blade, Big 12 Box 30.00 360.00 59 Cutter, Heavy Duty 46 Pc 100.00 4,600.00 60 Dating And Stamping Machine, Self Inking (dated 2024 And Up) 42 Pc 500.00 21,000.00 61 Envelope, Ordinary, Long Brown 1525 Pc 4.00 6,100.00 62 Envelope, Ordinary, Short Brown 243 Pc 3.00 729.00 63 Eraser (for Pencil) 161 Pc 15.00 2,415.00 64 Expanding Envelope, Kraft, Legal Size 335 Pc 15.00 5,025.00 65 Expanding Envelope, Hard Plastic With Garter (pvc Type), Legal Size 76 Pc 90.00 6,840.00 66 Expanding Envelope, Plastic Long (thick) 230 Pc 35.00 8,050.00 67 Expanding Envelope, Plastic Long With Handle 355 Pc 90.00 31,950.00 68 File Box W/ Cover (blue) 233 Pc 410.00 95,530.00 69 File Box W/ Cover (red) 136 Pc 410.00 55,760.00 70 File Rack, 3 Layers, Heavy Duty 24 Pc 500.00 12,000.00 71 Film Index (with Sign Here Note) 219 Pack 55.00 12,045.00 72 Film Index Rainbow Color 158 Pack 45.00 7,110.00 73 Folder Expanding, Legal Size (green, Glossy) 1574 Pc 18.00 28,332.00 74 Folder Expanding, Short (green, Glossy) 50 Pc 15.00 750.00 75 Folder Long Ordinary, Kraft, Thick 1196 Pc 6.00 7,176.00 76 Folder Long Ordinary, White, Thick 3869 Pc 6.00 23,214.00 77 Folder Plastic Clear W/ Slide (a4) (thick Plastic) 66 Pc 35.00 2,310.00 78 Folder Plastic Clear W/ Slide (legal) (thick Plastic) 178 Pc 40.00 7,120.00 79 Folder, Morocco, Legal (blue) Not Glossy 140 Pc 25.00 3,500.00 80 Folder, Morocco, Legal (green) Not Glossy 92 Pc 25.00 2,300.00 81 Folder, Morocco, Short (blue) Not Glossy 107 Pc 18.00 1,926.00 82 Folder, Morocco, Short (green) Not Glossy 35 Pc 18.00 630.00 83 Glue Gun Heavy Duty Big 8 Pc 360.00 2,880.00 84 Glue Stick, Big 102 Pc 12.00 1,224.00 85 Glue, Multi-purpose 240 Grams 12 Bot 150.00 1,800.00 86 Highlighter, Blue 55 Pc 40.00 2,200.00 87 Highlighter, Green 95 Pc 40.00 3,800.00 88 Highlighter, Orange 83 Pc 40.00 3,320.00 89 Highlighter, Pink 78 Pc 40.00 3,120.00 90 Highlighter, Yellow 91 Pc 40.00 3,640.00 91 I.d. Holder W/ Lace 4"x6" 100 Pc 45.00 4,500.00 92 Illustration Board, 1 Whole 15 Pc 70.00 1,050.00 93 Index Card (3"x5") 50s/pack 24 Pack 45.00 1,080.00 94 Laminating Film A4 Size 100pcs/pack 250 Mic 34 Pack 1,200.00 40,800.00 95 Lead, For Mechanical Pencil 0.5mm 12pc/tube 2 Tube 30.00 60.00 96 Lever Arch File, Blue, File Top, Size: Approx. (11 X 13.5 X 2.5 Inches) 20 Pc 195.00 3,900.00 97 Lever Arch File, Blue, Landscape, Size: Approx. (11 X 13.5 X 2.5 Inches) 40 Pc 195.00 7,800.00 98 Lever Arch File, Blue, Size: Approx. (15.5 X 9.5 X 3 Inches) 45 Pc 195.00 8,775.00 99 Magazine File Box (5"x9"x15-3/4") 60 Pc 110.00 6,600.00 100 Mailing Envelope, White, 500pcs/box 18 B0x 290.00 5,220.00 101 Manila Paper 1 Whole 276 Sheet 5.00 1,380.00 102 Marker Permanent Ink Refill 30ml, Black (pilot) 36 Bot 110.00 3,960.00 103 Marker Permanent Ink Refill 30ml, Blue (pilot) 32 Bot 110.00 3,520.00 104 Notebook (80 Leaves) 1040 Pc 45.00 46,800.00 105 Official Record Book (300 Pages) Aprox. Size: (8.5 X 11) 73 Book 250.00 18,250.00 106 Official Record Book (500 Pages) Aprox. Size: (8.5 X 11) 100 Book 280.00 28,000.00 107 Paper Cutter With Board, Wood Base, 12x15 3 Unit 1,200.00 3,600.00 108 Paper Cutter,steel Base W/ Ruler & Presser 15'x12' 1 Unit 2,000.00 2,000.00 109 Paper Fastener (plastic) 100 Box 40.00 4,000.00 110 Paper Fastener, (metal) 207 Box 70.00 14,490.00 111 Paper, Ruled Pad, 90 Leaves (yellow Pad) 35 Pad 45.00 1,575.00 112 Parchment Paper, Long, 10sheets/pack (cream) 48 Pack 35.00 1,680.00 113 Parchment Paper, Short, 10sheets/pack (cream) 58 Pack 30.00 1,740.00 114 Paste With Applicator, 200 Grams 4 Jar 80.00 320.00 115 Pencil With Eraser No.2 (12pcs/box) 212 Box 72.00 15,264.00 116 Pencil, Mechanical, 0.5mm Lead 56 Pc 47.75 2,674.00 117 Permanent Marker (black) (bullet Type) (super Color Marker) 225 Pc 45.00 10,125.00 118 Permanent Marker (black) (chisel Type) (super Color Marker) 174 Pc 55.00 9,570.00 119 Permanent Marker (blue) (bullet Type) (super Color Marker) 195 Pc 45.00 8,775.00 120 Permanent Marker (blue) (chisel Type) (super Color Marker) 117 Pc 55.00 6,435.00 121 Permanent Marker (red) (bullet Type) (super Color Marker) 57 Pc 45.00 2,565.00 122 Permanent Marker (red) (chisel Type) (super Color Marker) 70 Pc 55.00 3,850.00 123 Philippine National Flag, Size: 90cm X 150cm 12 Pc 102.00 1,224.00 124 Photo Paper, Glossy, A4, 20pcs/pack 67 Pack 150.00 10,050.00 125 Plastic Twine, One Kilo Per Roll 18 Roll 80.00 1,440.00 126 Puncher, Heavy Duty, 2 Holes 12 Unit 200.00 2,400.00 127 Push Pin, Hammer Head Type, Assorted Colors, 100s/box 13 Box 50.00 650.00 128 Ring Binder, 1" 5 Pc 45.00 225.00 129 Ring Binder, 1/2 " 5 Pc 20.00 100.00 130 Rotary Pencil Sharpener 2 Pc 300.00 600.00 131 Rubber Band, Large Size 15 Box 150.00 2,250.00 132 Ruler Metal 12 Inch 9 Pc 50.00 450.00 133 Ruler Plastic 12 Inch 5 Pc 20.00 100.00 134 Scissors Heavy Duty Big 8" (stainless) 63 Pair 120.00 7,560.00 135 Screw Fastener 3" 438 Pc 10.00 4,380.00 136 Screw Fastener 4" 357 Pc 12.00 4,284.00 137 Sign Pen V5, Black 415 Pc 55.00 22,825.00 138 Sign Pen V5, Blue 387 Pc 55.00 21,285.00 139 Sign Pen V5, Green 55 Pc 55.00 3,025.00 140 Sign Pen, 1.0mm, Black 177 Pc 75.00 13,275.00 141 Sign Pen, 1.0mm, Blue 146 Pc 75.00 10,950.00 142 Sign Pen, Black Pentel Gel Type 0.5 539 Pc 95.00 51,205.00 143 Sign Pen, Blue Pentel Gel Type 0.5 400 Pc 95.00 38,000.00 144 Specialty Board, Cream, 8.5x11, 10pcs/pack (b-board) 673 Pack 35.00 23,555.00 145 Specialty Board, Cream, 8.5x13, 10pcs/pack (b-board) 648 Pack 40.00 25,920.00 146 Specialty Board, White, 8.5x11, 10pcs/pack (b-board) 225 Pack 35.00 7,875.00 147 Specialty Board, White, 8.5x13, 10pcs/pack (b-board) 408 Pack 40.00 16,320.00 148 Stamp Pad Ink Black 50ml 13 Pc 45.00 585.00 149 Stamp Pad Ink Red 50ml 4 Pc 45.00 180.00 150 Stamp Pad Ink Violet 50ml 23 Pc 45.00 1,035.00 151 Stamp Pad Standard Size Black 7 Pc 40.00 280.00 152 Stamp Pad Standard Size Violet 4 Pc 40.00 160.00 153 Staple Wire #35 297 Box 40.00 11,880.00 154 Stapler, #35 Heavy Duty With Staple Remover 57 Unit 400.00 22,800.00 155 Stapler, Long Reach Heavy Duty 3 Unit 500.00 1,500.00 156 Sticker Paper (high Gloss, Inkjet Friendly 10sheets/pack) A4size 75 Pack 95.00 7,125.00 157 Sticker Paper (high Gloss, Inkjet Friendly 10sheets/pack), Long 123 Pack 100.00 12,300.00 158 Sticker Paper (high Gloss, Inkjet Friendly 10sheets/pack), Short 55 Pack 90.00 4,950.00 159 Sticky Notes (2"x1.5") 100 Sheets/pad 126 Pad 25.00 3,150.00 160 Sticky Notes (2"x2"), 100 Sheets/pad 141 Pad 30.00 4,230.00 161 Sticky Notes (3"x2"), 100 Sheets/pad 127 Pad 40.00 5,080.00 162 Sticky Notes (3"x3"), 100 Sheets/pad 222 Pad 40.00 8,880.00 163 Sticky Notes (3"x4), 100 Sheets/pad 158 Pad 50.00 7,900.00 164 Sticky Notes (3"x5"), 100 Sheets/pad 215 Pad 50.00 10,750.00 165 Super Glue / Shoe Glue 3 Grams 6 Pc 50.00 300.00 166 Super Permanent Marker, Fine Black (industrial) (sharpie) 35 Pc 90.00 3,150.00 167 Tape Dispenser, Heavy Duty (1") 9 Pc 150.00 1,350.00 168 Tape Double Sided Thin 24mm White 95 Pc 40.00 3,800.00 169 Tape Double Sided Adhesive W/ Foam Green, 2" 94 Roll 230.00 21,620.00 170 Tape Double Sided Adhesive W/ Foam Green, 1" 84 Roll 150.00 12,600.00 171 Tape Duct, Color Blue 2" 62 Roll 110.00 6,820.00 172 Tape Duct, Color Grey 2" 78 Roll 110.00 8,580.00 173 Tape, Masking, 1/2" 47 Roll 21.00 987.00 174 Tape, Masking, 24mm, 1", 100m 95 Roll 35.00 3,325.00 175 Tape, Masking, 48mm, 2", 100m 301 Roll 70.00 21,070.00 176 Tape, Packaging, 48mm, 2", 100m 88 Roll 55.00 4,840.00 177 Tape, Transparent, 24mm, 1", 100m 170 Roll 30.00 5,100.00 178 Tape, Transparent, 48mm, 2", 100m 126 Roll 52.00 6,552.00 179 Tracing Paper, Per Cut, 20x30, 8085 Thick 2 Pc 20.00 40.00 180 Whiteboard, 3ft X 4ft 7 Pc 2,000.00 14,000.00 181 Whiteboard, 5ft X 3ft 6 Pc 2,800.00 16,800.00 182 Air Freshener, 280ml (lemon Fresh) 163 Can 240.00 39,120.00 183 Air Freshener, Scented Gel, 180 Grams 98 Pc 220.00 21,560.00 184 Bathroom Cleaner (approx. 900ml) 29 Bot 300.00 8,700.00 185 Bathroom Soap, 90 Grams 16 Pc 50.00 800.00 186 Bleach Colored 1 Ltr 62 Bot 130.00 8,060.00 187 Bleach White 1 Ltr 63 Bot 100.00 6,300.00 188 Broom, Ceiling, Bamboo 23 Pc 170.00 3,910.00 189 Broom, Soft 5 Pc 170.00 850.00 190 Broom, Stick 14 Pc 40.00 560.00 191 Car Freshener 42 Grams, Organic Canister, Assorted Scent 63 Can 240.00 15,120.00 192 Detergent Bar, Long 12 Bar 80.00 960.00 193 Detergent Powder, W/ Fabric Conditioner 1kg 43 Pack 150.00 6,450.00 194 Dishwashing Liquid (250ml) 402 Bot 70.00 28,140.00 195 Disinfectant Spray, 170g 89 Can 280.00 24,920.00 196 Door Mat, Cloth Rectangle 105 Pc 60.00 6,300.00 197 Dust Pan, Plastic Big 2 Pc 80.00 160.00 198 Fabric Conditioner 800 Ml 14 Bot 250.00 3,500.00 199 Face Towel (cotton), Good Morning 159 Pc 30.00 4,770.00 200 Floor Mop With Bucket (360degrees Rotating Micro Fiber Head) 3 Set 1,500.00 4,500.00 201 Furniture Cleaner, 300ml 32 Can 300.00 9,600.00 202 Garbage Bag, Black, Gusseted Type Thick Plastic, 10's/roll, (small) 55 Roll 70.00 3,850.00 203 Garbage Bag, Black, Thick Plastic, 10's/pack, (large), Heavy Duty 145 Pack 100.00 14,500.00 204 Garbage Bag, Black, Thick Plastic, 10's/pack, (xl) Heavy Duty 37 Pack 130.00 4,810.00 205 Garbage Bag, Black, Thick Plastic, 10's/pack, (xxl) Heavy Duty 239 Pack 150.00 35,850.00 206 Garbage Bag, Black, Thick Platic, 10's/pack, (medium), Heavy Duty 168 Pack 80.00 13,440.00 207 Glass Cleaner, Big Sprayer Type 7 Bot 197.00 1,379.00 208 Glass Squeezer W/ Handle 1 Pc 125.00 125.00 209 Hand Sanitizing Gel, 60ml 15 Bot 60.00 900.00 210 Insecticide Spray (aerosol) 400ml 73 Can 350.00 25,550.00 211 Laundry Brush 4 Pc 30.00 120.00 212 Laundry Gloves (medium) 1 Pc 200.00 200.00 213 Liquid Handwash (antibacterial) 400ml 123 Bot 140.00 17,220.00 214 Microfiber, Cleaning Cloth 35cm X 35cm 47 Pc 60.00 2,820.00 215 Mop W/ Squeezer (squeez Mop) 26 Pc 350.00 9,100.00 216 Pail W/ Cover (16l) 18 Pc 200.00 3,600.00 217 Paper Towel, Interfold 144 Pack 120.00 17,280.00 218 Push Brush (floor Brush) 20 Pc 130.00 2,600.00 219 Scrub Sponge, Heavy Duty 116 Pc 60.00 6,960.00 220 Scrubbing Pads, Heavy Duty 25 Pc 40.00 1,000.00 221 Table Napkin, Pre Folded 13 Pack 100.00 1,300.00 222 Tissue Paper, 2-ply, 12 Rolls/pack 422 Pack 180.00 75,960.00 223 Tissue Paper, 3-ply, @ 4rolls/pack 213 Pack 160.00 34,080.00 224 Toilet Bowl Brush W/ Box 57 Pc 92.00 5,244.00 225 Toilet Bowl Pump 2 Pc 60.00 120.00 226 Toilet Deodorant Cake, 50 Grams 108 Pc 50.00 5,400.00 227 Trash Bin, Plastic W/ Cover, 11l Capacity 6 Pc 150.00 900.00 228 Trash Bin, Plastic W/ Cover, 25l Capacity 1 Pc 250.00 250.00 229 White Facial Tissue (200mmx200mm)2ply 210 Box 110.00 23,100.00 230 Cd Rewritable, 700mb 80min. W/ Case 603 Pc 50.00 30,150.00 231 Dvd-rewritable W/ Case 6 Pc 90.00 540.00 232 External Hard Drive (1 Tb) Usb 3.0 27 Unit 4,700.00 126,900.00 233 External Hard Drive, Ssd (1 Tb) Usb 3.0/type C 15 Unit 6,000.00 90,000.00 234 Flash Drive , Usb 16gb, Plug In Play 3 Pc 490.00 1,470.00 235 Flash Drive, 32gb Ultra Usb Driver (otg); Micro-usb & Usb Connectors 42 Pc 1,300.00 54,600.00 236 Flash Drive, Usb 32 Gb 31 Pc 1,000.00 31,000.00 237 Flash Drive, Usb 64 Gb 119 Pc 1,500.00 178,500.00 238 Hdmi Cable, 10m 5 Pc 600.00 3,000.00 239 Hdmi Cable, 5m 3 Pc 300.00 900.00 240 Keyboard, Usb Type 36 Pc 450.00 16,200.00 241 Keyboard, Wireless 5 Pc 600.00 3,000.00 242 Microsd Memory Card, 32gb 1 Pc 1,000.00 1,000.00 243 Microsd Memory Card, 64gb 2 Pc 1,800.00 3,600.00 244 Mouse Optical, (usb) 15 Pc 300.00 4,500.00 245 Mouse For Laptop, Optical 50 Pc 440.00 22,000.00 246 Mouse Optical, Wireless 21 Pc 630.00 13,230.00 247 Mouse Pad 119 Pc 30.00 3,570.00 248 Powerbank 10000mah 5 Pc 1,500.00 7,500.00 249 Powerbank 20000mah 50 Pc 2,500.00 125,000.00 250 Uninterruptible Power Supply (ups), 500va - 600va 12 Pc 4,500.00 54,000.00 251 Usb Hub, 3.0, 4 Port 5 Pc 500.00 2,500.00 252 Usb Lan Wireless Adapter 8 Unit 1,000.00 8,000.00 253 Wireless Usb Presenter 2 Unit 2,200.00 4,400.00 254 Ink Brother, Bt5000m, Magenta 36 Bottle 490.00 17,640.00 255 Ink Brother, Bt5000m, Yellow 36 Bottle 490.00 17,640.00 256 Ink Brother, Bt5000m, Cyan 41 Bottle 490.00 20,090.00 257 Ink Brother, Bt6000m, Black 30 Bottle 490.00 14,700.00 258 Ink Cartridge, Canon Cl-36, Colored (for Canon Mobile Printer) 13 Cart 1,600.00 20,800.00 259 Ink Cartridge, Canon Cl-811 Colored 3 Cart 2,000.00 6,000.00 260 Ink Cartridge, Canon Pg-35, Black (for Canon Mobile Printer) 10 Cart 1,100.00 11,000.00 261 Ink Cartridge, Canon Pg-810 (canon) 3 Cart 1,900.00 5,700.00 262 Ink Cartridge, Hp62, Black (hp Office Jet 200 Mobile Printer) 5 Cart 1,500.00 7,500.00 263 Ink Cartridge, Hp62, Tricolor (hp Office Jet 200 Mobile Printer) 5 Cart 1,800.00 9,000.00 264 Ink, Hp Gt 51 Black 2 Bottle 400.00 800.00 265 Ink, Hp Gt 52 Cyan 2 Bottle 400.00 800.00 266 Ink, Hp Gt 52 Magenta 2 Bottle 400.00 800.00 267 Ink, Hp Gt 52 Yellow 2 Bottle 400.00 800.00 268 Ink Epson T6731 Black (epson) 6 Bottle 800.00 4,800.00 269 Ink Epson T6732 Cyan (epson) 6 Bottle 800.00 4,800.00 270 Ink Epson T6733 Magenta (epson) 6 Bottle 800.00 4,800.00 271 Ink Epson T6734 Yellow (epson) 6 Bottle 800.00 4,800.00 272 Ink Epson T6735, Light Cyan (epson) 3 Bottle 800.00 2,400.00 273 Ink Epson T6736, Light Magenta (epson) 3 Bottle 800.00 2,400.00 274 Ink Epson, T6641, Black 70ml 22 Bottle 450.00 9,900.00 275 Ink Epson, T6642, Cyan 70ml 9 Bottle 450.00 4,050.00 276 Ink Epson, T6643, Magenta 70ml 13 Bottle 450.00 5,850.00 277 Ink Epson, T6644, Yellow 70ml 14 Bottle 450.00 6,300.00 278 Ink Epson, 001, Black 179 Bottle 700.00 125,300.00 279 Ink Epson, 001, Cyan 138 Bottle 600.00 82,800.00 280 Ink Epson, 001, Magenta 138 Bottle 600.00 82,800.00 281 Ink Epson, 001, Yellow 137 Bottle 600.00 82,200.00 282 Ink Epson, 003, Black 679 Bottle 500.00 339,500.00 283 Ink Epson, 003, Cyan 465 Bottle 500.00 232500 284 Ink Epson, 003, Magenta 483 Bottle 500.00 241,500.00 285 Ink Epson, 003, Yellow 451 Bottle 500.00 225500 286 Ink Epson, 008, Black 37 Bottle 1,200.00 44,400.00 287 Ink Epson, 008, Cyan 28 Bottle 900.00 25,200.00 288 Ink Epson, 008, Magenta 29 Bottle 900.00 26,100.00 289 Ink Epson, 008, Yellow 29 Bottle 900.00 26,100.00 290 Toner Cartridge, Fuji Xerox S1810/s2010/s2220/s2420 (ct201911) 3 Cart 5,400.00 16,200.00 291 Toner Cartridge, Fuji Xerox S2011/s2320/s2520 (ct202384) 1 Cart 5,400.00 5,400.00 292 Toner Cartridge, Hp Laserjet P1102, Ce285a (85a) 25 Cart 5,000.00 125,000.00 293 Toner Cartridge, Kyocera (tk 1175) Monochrome 4 Cart 9,500.00 38,000.00 294 Toner Cartridge, Sharp Ar-6026n (mx-238ft) 5 Cart 9,500.00 47,500.00 295 Toner Cartridge, Lexmark (mx321) 2 Cart 10,000.00 20,000.00 296 Hp Color Laserjet Toner 206a, Black 7 Cart 9,500.00 66,500.00 297 Hp Color Laserjet Toner 206a, Cyan 1 Cart 9,500.00 9,500.00 298 Hp Color Laserjet Toner 206a, Magenta 1 Cart 9,500.00 9,500.00 299 Hp Color Laserjet Toner 206a, Yellow 1 Cart 9,500.00 9,500.00 300 Ink Brother Btd60bk 8 Bottle 510.00 4,080.00 301 Certificate Holder, Legal Size W/ Plastic Cover 400 Pc 60.00 24,000.00 302 Specialty Board, Cream, A4 8.2x11.7, 10pcs/pack (b-board) 300 Pack 30.00 9,000.00 303 Specialty Board, White, A4 8.2x11.7, 10pcs/pack (b-board) 105 Pack 30.00 3,150.00 304 Ink Cartridge, Hp 682, Black 3 Cart 550.00 1,650.00 305 Ink Cartridge, Hp 682, Tri-color 3 Cart 550.00 1,650.00 306 Index Card (5"x8") 50s/pack 3 Pack 65.00 195.00 307 Screw Fastener 1" 200 Pc 7.00 1,400.00 308 Screw Fastener 2" 198 Pc 8.00 1,584.00 309 Plastic Fastener (5 Pcs/pack) Double Lock 220 Pack 25.00 5,500.00 310 Notebook, A6 Size, 200 Pages 115 Pc 60.00 6,900.00 311 Notebook, A7 Size, 200 Pages 100 Pc 50.00 5,000.00 312 Usb 3.1 Otg Flashdrive, Type C, 128 Gb 51 Pc 3,000.00 153,000.00 313 Notebook, A5 Size, Soft Leather Cover, 200 Sheets 80 Pc 200.00 16,000.00 314 Gel Ink Sign Pen, 0.4 100 Pc 90.00 9,000.00 315 Gel Ink Sign Pen, 0.3 100 Pc 90.00 9,000.00 316 Toner Cartridge, Fujifilm Apeos 2150 Nda 5 Cart 3,500.00 17,500.00 317 Whiteboard 2ft X 2 Ft 2 Piece 2,000.00 4,000.00 318 Clamp - Stapler Remover 5 Pcs 30.00 150.00 319 Portable Bluetooth/wireless Speaker With Trolley (free Microphone) 1 Unit 6,695.00 6,695.00 320 Dishwashing Liquid Diy Kit, Lemon Scent (for 15-16 Liters Output) 25 Set 400.00 10,000.00 321 Fabric Conditioner Diy Kit, Sunrise Fresh Scent (for 20 Liters Output) 25 Set 450.00 11,250.00 322 Liquid Handsoap Diy Kit, Antibac Scent (for 15-16 Liters Output) 25 Set 400.00 10,000.00 323 Sack For 50kls Capacity (size: 64cm X 104cm) 76 Pc 15.00 1,140.00 324 Printer Ribbon, Epson Lq 310 2 Cart 250.00 500.00 325 Stackable Storage Box With Cover And Wheels (155l) 3 Pcs 1,100.00 3,300.00 Total 6,294,122.50 Delivery Schedule: Delivery Schedule: Sixty (60) Working Days From Receipt Of Ntp Drop-off Point: Da-rfo 1, City Of San Fernando, La Union Delivery Of The Goods Is Required Within Sixty (60) Working Days From Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Two Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Prospective Bidders May Obtain Further Information From And Inspect The Bidding Documents At The Address Given Below During Office Hours From 8:00 Am To 5:00 Pm, Monday To Friday. Department Of Agriculture Regional Field Office 1 Aguila Rd., Sevilla, City Of San Fernando, La Union 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From January 7-27, 2025 From The Address Given And Websites Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php10,000.00. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, By Facsimile, Or Through Electronic Means. 6. The Da-rfo 1 Will Hold A Pre-bid Conference On 14 January 2025, 3:00 Pm At Da-rfo 1, 5th Floor Conference Room, Aguila Road, Sevilla, City Of San Fernando, La Union, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Above On Or Before 27 January 2025, 3:00 Pm. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On 27 January 2025, 3:00 Pm At Da-rfo 1, 5th Floor Conference Room, Aguila Road, Sevilla, City Of San Fernando, La Union. Bids Will Be Opened In The Presence Of The Bidders Or Their Authorized Representatives. 10. Additional Instructions To Bidders: A. The Bidders Or Their Duly Authorized Representatives May Attend The Bid Opening; B. In Case A Representative Will Be Attending The Bid Opening, A Special Power Of Attorney (spa), Secretary’s Certificate, Board Resolution Or Any Other Forms Of Authorization (notarized), As The Case May Be, Together With The Company-issued Identification Card Or Any Valid Id Must Be Presented Upon Submission Of The Bid Proposal At The Bac Secretariat. The Name/title Of The Project Must Be Indicated In The Authorization Or Spa. C. Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. Bidders Shall Submit Their Bids With Proper Index Tabbing Using The Forms Specified In The Bidding Documents In Two (2) Separate Sealed Bid Envelopes, And Which Shall Be Submitted Simultaneously; The First Component Which Is The Technical Eligibility Requirements Must Be Soft-bound, Marked With The Name Of The Contract And Its Ib No., Name And Address Of The Bidder, And Enclosed In An Envelope, Sealed With Signature And Marked With The Name Of The Contract, Name And Address Of The Bidder, Addressed To The Bids And Awards Committee (bac) Da Rfo-1 City Of San Fernando, La Union, The Specific Identification No. And The Warning “do Not Open Before…” The Date And Time For The Bid Opening. The Second Component Being The Financial Eligibility Requirements Can Be Fastened In A Folder, Marked With The Name Of The Contract And Its Ib No., Name And Address Of The Bidder, And Enclosed In An Envelope, Sealed With Signature And Marked With The Name Of The Contract, Name And Address Of The Bidder, Addressed To The Bids And Awards Committee (bac) Da Rfo-1 City Of San Fernando, La Union, The Specific Identification No. And The Warning “do Not Open Before…” The Date And Time For The Bid Opening. The Technical And Financial Requirement Each In Separate Envelopes, Shall Be Enclosed In A Mother Envelope With The Same Sealing And Markings. Non-compliance With Index Tabbings Shall Not Be A Ground For Outright Disqualification Or Declaration Of Ineligibility. The Improper Index Tabbings Must Be Duly Acknowledged By The Bidder/representative And Be Subject To The Bid Evaluation And Post-qualification Of The Technical Working Group (twg) As To Their Substance. D. All Documents In The Financial Requirements Envelope Must Be Duly Signed And/or Initialed By The Bidder/authorized Representative On Each And Every Page Thereof. 11. The Da-rfo 1 Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And Section 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Dennis I. Tactac, Abe Chairperson, Bids And Awards Committee Department Of Agriculture - Regional Field Office 1 Aguila Road, Sevilla, City Of San Fernando, La Union Tel. No. :(072) 242/1045-46, Ext. 07 E-mail Add: Bacsec@ilocos.da.gov.ph 13. For Downloading Of Bidding Documents, You May Visit The Following Websites: Da-rfo 1 Website: Https://ilocos.da.gov.ph/ Philgeps Website: Https://www.philgeps.gov.ph/ January 6, 2025 Approved: (sgd.) Gilbert D. Rabara, Dvm Vice-chairperson, Bids And Awards Committee Invitation To Bid Identification No. Da-rfo 1-2025-goods-033

Details: U.s. Embassy Malabo date: December 20, 2024 request For Quotation # 19ek2025q0002 replacement Of On-compound Residential Solar Water Heaters the U.s. Embassy In Malabo, Equatorial Guinea Invites Vendors To Submit A Quotation For The Replacement Of On-compound Residential Solar Water Heaters. instructions To Quoters: in Order For Your Quotation To Be Considered, Each Offer Must Include The Following: completed Pricing Table – Section I - A. completed Quoter’s Info – Section Ii. completed Technical Requirements, To Include The Following Information Demonstrating The Quoter’s Ability To Perform: name Of A Project Manager (or Another Liaison To The Embassy) Who Understands Written And Spoken English. evidence That The Quoter Operates Established Business With A Permanent Address And Telephone Listing. evidence That The Quoter Has The Necessary Personnel, Equipment, And Financial Resources Available To Perform The Work. a Proof Showing That Contractor Has Already Started The Sam Registration Process. Sam Registration “system For Award Management” Is Required For Contracts Exceeding Us$30,000.00. See Exhibit A And The Following Link For Further Instructions: Https://www.fsd.gov/sys_attachment.do?sys_id=9a12412bdb7bbd90a8cb4a391396194f contractor’s Certification Regarding The National Defense Authorization Act (ndaa) Clauses (52.204-24, 52-204-25 And 52-204-26). See Certification Instructions In Exhibit B. your Quotation By Email To Malabop@state.gov No Later Than Close Of Business On Monday, Jan 6, 2025. No Quotation Will Be Accepted After This Time. you Are Encouraged To Make Your Quotation Competitive. The Rfq Does Not Commit The American Embassy To Make Any Award. The Embassy May Cancel This Rfq Or Any Part Of It. The Embassy May Award Multi Contracts Against This Requirement And It Reserves The Right To Reject Proposals/quotations That Are Unreasonably Low Or High In Price. direct Any Questions Regarding This Rfq By Email To Malabop@state.gov thank You. section I pricing Table no. description total Cost (usd) 1 replacement Of On-compound Residential Solar Water Heaters grand Total: b. Statement Of Work introduction overview & Description: The U.s. Embassy Malabo Requires The Replacement Of On-compound Residential Solar Water Heaters. The Solar Water Heaters Were Originally Installed During Initial Construction And Are At The End Of Their Useful Life. Many Have External Leaks And Are Isolated From The System. location: The Facility, U.s. Embassy Is Located In The Capital Of Equatorial Guinea, Malabo. All Onsite Inspections Shall Be Requested Through The U. S. Embassy’s Facility Manager (fm) Or Contracting Officer Representative (cor). objective: The Objective Of Solar Water Heater Replacement Is To Restore Efficiency To The Water Heating System And Reduce The Burden On Electrical Water Heaters, Effectively Extending Their Life. communication: The Fac Team Maintain Contact With The Project Lead: Michael Macsay, Facility Manager (fm), U.s. Embassy Malabo, Email: Macsaymd@state.gov, Mobile: +240-555-000-306. project Phases receipt And Inspection: Once Solar Water Heaters Are Received, They Will Be inspected By Facilities (fac) Personnel For Damage From Shipping. removal And Installation: Old Solar Water Heaters Will Be Removed From The system And Lowered To The Ground For Disposal. Replacement Water Heaters Will Be Raised To The Roof And Installed Per Manufacturer’s Instructions. 2.2.1 Note: A Crane And Rigging Will Be Required To Remove And Install Solar Water Heaters. commissioning: Upon Complete Installation, Solar Water Heaters Will Be Tested and Commissioned Within The Guidelines Set By The Manufacturer. general Requirements work Shall Be Performed In Accordance With Overseas Building Operations (obo) Safety, Health, And Environmental Management (shem) Standards. Proper Lifting And Rigging Practices Shall Be Followed During Installation And Removal The Solar Water Heaters. proper Ppe Shall Be Worn At All Times During The Removal/installation Process. work Shall Be Performed In Accordance With The Manufacturer’s Guidelines To Ensure Warranty Is Not Voided. any Damage To Grass And/or Vegetation During Removal And Installation Of Solar Water Heaters Shall Be The Responsibility Of The Fac Team To Replace. Precautions Shall Be Taken To Ensure Damage To Post’s Grass And Vegetation Is Minimized. responsibilities Of The Fac Team project Safety Plan (psp): Fm/posho And Aposho Will Develop A Project Safety Plan Using Us Army Corp Of Engineers (usace) Em385-1-1. The Plan Will Be Communicated To The Fac Staff Performing The Work. fac Staff Shall Adhere To The Project Safety Plan Throughout The Duration Of The Project. Safety Violations And Injuries Shall Be Reported Immediately To The Posho/aposho. quality Management Plan (qmp): Fm Shall Establish A Quality Management Plan To Include Inspection To Adherence With Installation Guide. Regular Inspections Between Coatings Will Be Conducted With The Designated Supervisor Of The Crew. The Crew Shall Repair Any Inconsistencies Found Within The Coatings As Defined By The Qmp. pre-project Requirements tooling & Materials: All Tooling And Materials Shall Be Inventoried Prior To The Start Of The Project To Ensure Efficiency And The Success Of The Project. All Tooling Will Be Approved By The Fm And Designated Project Supervisor Prior To Ordering. storage: Storage Shall Be Maintained In Accordance With The Storage Instructions From The Manufacturer. Proper Storage Of Resurfacing Materials Is Essential, And A Space Shall Be Identified Prior To The Project Start. all Workers Shall Review The Qmp To Understand The Standards To Be Met In The Application Of The Tennis Court Resurfacing. Any Deviation From The Installation Guide And Manufacturers Standards, May Cause The Resurfacing Materials To Degrade Or Fail Earlier Than Expected. all Workers Shall Review The Psp Set By The Fm/posho To Ensure Standards Set Forth Can And Will Be Adhered To. project Requirements all Workers Shall Adhere To The Psp Set Forth By The Fm/posho. all Workers Shall Adhere To The Qmp And Request Inspections Or Understand That Surprise Inspections Will Be Conducted To Ensure Quality Of Work. supervisor And Workers Will Adhere To The Manufacturer’s Installation Guide. technical Specifications: Refer To Appendix A For Technical Specifications Of The Solar Water Heater Requirements. reference Material work Shall Be Performed In Accordance With The Following References: manufacturer’s Installation Guide. usace 385-1-1. post Quality Management Plan (qmp) appendix A technical Specifications component specification collector Housing uv Protected cover antireflex Glass (double Coated) absorber/tank Capacity 40 Gal (150 Liter) absorber/tank Construction steel section Ii contractor’s Information & Signatures: contractor’s Name company Name address uei # ncage # office Tel # fax # mobile # email name Of Person Authorized To Sign: ___________________________________________________________ signature Of Person Authorized: ______________________________________________________________ the Penalty For Making False Statements Is Prescribed In The U.s. Criminal Code, 18 U.s.c. 1001 exhibit A sam.gov Registration the Federal Acquisition Regulation (far) - Clause # 52.204-7 - Requires All Contractors To Be Registered In The System For Award Management “sam” Database. Registration In Sam Is Mandatory Prior To Signing Any Contract That Exceeds $30,000. As We Would Like To Continue Working With You In The Near Future, We Suggest That You Start The Registration Process Asap As This Requirement Is Time Consuming. the Registration Process Starts With Obtaining A Uei Number And A Ncage Code. You Should Be Prepared To Provide The Following Information: (i) Company Legal Business. (ii) Trade Style, Doing Business, Or Other Name By Which Your Entity Is Commonly Recognized. (iii) Company Physical Street Address, City, State, And Zip Code. (iv) Company Mailing Address, City, State And Zip Code (if Separate From Physical). (v) Company Telephone Number. (vi) Date The Company Was Started. (vii) Number Of Employees At Your Location. (viii) Chief Executive Officer/key Manager. (ix) Line Of Business (industry). (x) Company Headquarters Name And Address (reporting Relationship Within Your Entity). if A Contractor Does Not Become Registered In The Sam Database In The Time Prescribed By The Contracting Officer, The Contracting Officer Will Proceed To Award To The Next Otherwise Successful Registered Contractor. if You Have Any Questions During The Registration Process, You Will Need To Contact The Customer Service For Sam By Registering Or Contacting The Following Website: federal Service Desk url: Www.fsd.gov hours: 8am - 8pm (eastern Time) us Calls: 866-606-8220 international Calls: 334-206-7828 dsn: 866-606-8220 exhibit B ndaa Certification the Us Embassy Must Comply With Section 889(a)(1)(b) Of The Fy2019 National Defense Authorization Act And Is Prohibited From Entering Into A Contract, Or Extending Or Renewing A Contract With An Entity That Uses Any Equipment, System, Or Service That Uses Covered Telecommunications Equipment Or Services As A Substantial Or Essential Component Of Any System, Or As Critical Technology As Part Of Any System, Unless A Waiver Is Granted. as Defined In Statute, Covered Telecommunications Equipment Or Services Means The Following: Telecommunications Equipment Produced By Huawei, Zte, Hikvision, Dahua, And Hytera, Or Their Subsidiaries Or Affiliates. contractor’s Certification: contractor’s Certification In Response To The National Defence Authorization Act (ndaa) Clauses (52.204-24, 52-204-25 And 52-204-26) – The Prohibition On Contracting For Certain Telecommunications And Video Surveillance Services Or Equipment: by Affixing Your Authorized Signature In Section Ii And Submitting This Certification, The Undersigned Certifies That Neither It, It’s Principals Nor Affiliates, Will Be Supporting The Us Embassy Using The Proscribed Equipment Or Services. far Clauses Incorporated In Full Text: 52.204-24 Representation Regarding Certain Telecommunications And Video Surveillance Services Or Equipment (aug 2020) the Offeror Shall Not Complete The Representation At Paragraph (d)(1) Of This Provision If The Offeror Has Represented That It “does Not Provide Covered Telecommunications Equipment Or Services As A Part Of Its Offered Products Or Services To The Government In The Performance Of Any Contract, Subcontract, Or Other Contractual Instrument” In The Provision At 52.204-26, Covered Telecommunications Equipment Or Services—representation, Or In Paragraph (v) Of The Provision At 52.212-3, Offeror Representations And Certifications-commercial Items. (a) Definitions. As Used In This Provision- backhaul, Covered Telecommunications Equipment Or Services, Critical Technology, Interconnection Arrangements, Reasonable Inquiry, Roaming, And Substantial Or Essential component Have The Meanings Provided In The Clause 52.204-25, Prohibition On Contracting For Certain Telecommunications And Video Surveillance Services Or Equipment. (b) Prohibition. (1) Section 889(a)(1)(a) Of The John S. Mccain National Defense Authorization Act For Fiscal Year 2019 (pub. L. 115-232) Prohibits The Head Of An Executive Agency On Or After August 13, 2019, From Procuring Or Obtaining, Or Extending Or Renewing A Contract To Procure Or Obtain, Any Equipment, System, Or Service That Uses Covered Telecommunications Equipment Or Services As A Substantial Or Essential Component Of Any System, Or As Critical Technology As Part Of Any System. Nothing In The Prohibition Shall Be Construed To— (i) Prohibit The Head Of An Executive Agency From Procuring With An Entity To Provide A Service That Connects To The Facilities Of A Third-party, Such As Backhaul, Roaming, Or Interconnection Arrangements; Or (ii) Cover Telecommunications Equipment That Cannot Route Or Redirect User Data Traffic Or Cannot Permit Visibility Into Any User Data Or Packets That Such Equipment Transmits Or Otherwise Handles. (2) Section 889(a)(1)(b) Of The John S. Mccain National Defense Authorization Act For Fiscal Year 2019 (pub. L. 115-232) Prohibits The Head Of An Executive Agency On Or After August 13, 2020, From Entering Into A Contract Or Extending Or Renewing A Contract With An Entity That Uses Any Equipment, System, Or Service That Uses Covered Telecommunications Equipment Or Services As A Substantial Or Essential Component Of Any System, Or As Critical Technology As Part Of Any System. This Prohibition Applies To The Use Of Covered Telecommunications Equipment Or Services, Regardless Of Whether That Use Is In Performance Of Work Under A Federal Contract. Nothing In The Prohibition Shall Be Construed To— (i) Prohibit The Head Of An Executive Agency From Procuring With An Entity To Provide A Service That Connects To The Facilities Of A Third-party, Such As Backhaul, Roaming, Or Interconnection Arrangements; Or (ii) Cover Telecommunications Equipment That Cannot Route Or Redirect User Data Traffic Or Cannot Permit Visibility Into Any User Data Or Packets That Such Equipment Transmits Or Otherwise Handles. (c) Procedures. The Offeror Shall Review The List Of Excluded Parties In The System For Award Management (sam) (https://www.sam.gov) For Entities Excluded From Receiving Federal Awards For “covered Telecommunications Equipment Or Services.” (d) Representations. The Offeror Represents That— (1) It [] Will, [] Will Not Provide Covered Telecommunications Equipment Or Services To The Government In The Performance Of Any Contract, Subcontract Or Other Contractual Instrument Resulting From This Solicitation. The Offeror Shall Provide The Additional Disclosure Information Required At Paragraph (e)(1) Of This Section If The Offeror Responds “will” In Paragraph (d)(1) Of This Section; And (2) After Conducting A Reasonable Inquiry, For Purposes Of This Representation, The Offeror Represents That— it [] Does, [] Does Not Use Covered Telecommunications Equipment Or Services, Or Use Any Equipment, System, Or Service That Uses Covered Telecommunications Equipment Or Services. The Offeror Shall Provide The Additional Disclosure Information Required At Paragraph (e)(2) Of This Section If The Offeror Responds “does” In Paragraph (d)(2) Of This Section. (e) Disclosures. (1) Disclosure For The Representation In Paragraph (d)(1) Of This Provision. If The Offeror Has Responded “will” In The Representation In Paragraph (d)(1) Of This Provision, The Offeror Shall Provide The Following Information As Part Of The Offer: (i) For Covered Equipment— (a) The Entity That Produced The Covered Telecommunications Equipment (include Entity Name, Unique Entity Identifier, Cage Code, And Whether The Entity Was The Original Equipment Manufacturer (oem) Or A Distributor, If Known); (b) A Description Of All Covered Telecommunications Equipment Offered (include Brand; Model Number, Such As Oem Number, Manufacturer Part Number, Or Wholesaler Number; And Item Description, As Applicable); And (c) Explanation Of The Proposed Use Of Covered Telecommunications Equipment And Any Factors Relevant To Determining If Such Use Would Be Permissible Under The Prohibition In Paragraph (b)(1) Of This Provision. (ii) For Covered Services— (a) If The Service Is Related To Item Maintenance: A Description Of All Covered Telecommunications Services Offered (include On The Item Being Maintained: Brand; Model Number, Such As Oem Number, Manufacturer Part Number, Or Wholesaler Number; And Item Description, As Applicable); Or (b) If Not Associated With Maintenance, The Product Service Code (psc) Of The Service Being Provided; And Explanation Of The Proposed Use Of Covered Telecommunications Services And Any Factors Relevant To Determining If Such Use Would Be Permissible Under The Prohibition In Paragraph (b)(1) Of This Provision. (2) Disclosure For The Representation In Paragraph (d)(2) Of This Provision. If The Offeror Has Responded “does” In The Representation In Paragraph (d)(2) Of This Provision, The Offeror Shall Provide The Following Information As Part Of The Offer: (i) For Covered Equipment— (a) The Entity That Produced The Covered Telecommunications Equipment (include Entity Name, Unique Entity Identifier, Cage Code, And Whether The Entity Was The Oem Or A Distributor, If Known); (b) A Description Of All Covered Telecommunications Equipment Offered (include Brand; Model Number, Such As Oem Number, Manufacturer Part Number, Or Wholesaler Number; And Item Description, As Applicable); And (c) Explanation Of The Proposed Use Of Covered Telecommunications Equipment And Any Factors Relevant To Determining If Such Use Would Be Permissible Under The Prohibition In Paragraph (b)(2) Of This Provision. (ii) For Covered Services— (a) If The Service Is Related To Item Maintenance: A Description Of All Covered Telecommunications Services Offered (include On The Item Being Maintained: Brand; Model Number, Such As Oem Number, Manufacturer Part Number, Or Wholesaler Number; And Item Description, As Applicable); Or (b) If Not Associated With Maintenance, The Psc Of The Service Being Provided; And Explanation Of The Proposed Use Of Covered Telecommunications Services And Any Factors Relevant To Determining If Such Use Would Be Permissible Under The Prohibition In Paragraph (b)(2) Of This Provision. (end Of Provision) 52.204-25 Prohibition On Contracting For Certain Telecommunications And Video Surveillance Services Or Equipment (aug 2020) definitions. As Used In This Clause— backhaul Means Intermediate Links Between The Core Network, Or Backbone Network, And The Small Subnetworks At The Edge Of The Network (e.g., Connecting Cell Phones/towers To The Core Telephone Network). Backhaul Can Be Wireless (e.g., Microwave) Or Wired (e.g., Fiber Optic, Coaxial Cable, Ethernet). covered Foreign Country Means The People's Republic Of China. covered Telecommunications Equipment Or Services Means— (1) Telecommunications Equipment Produced By Huawei Technologies Company Or Zte Corporation (or Any Subsidiary Or Affiliate Of Such Entities); (2) For The Purpose Of Public Safety, Security Of Government Facilities, Physical Security Surveillance Of Critical Infrastructure, And Other National Security Purposes, Video Surveillance And Telecommunications Equipment Produced By Hytera Communications Corporation, Hangzhou Hikvision Digital Technology Company, Or Dahua Technology Company (or Any Subsidiary Or Affiliate Of Such Entities); (3) Telecommunications Or Video Surveillance Services Provided By Such Entities Or Using Such Equipment; Or (4) Telecommunications Or Video Surveillance Equipment Or Services Produced Or Provided By An Entity That The Secretary Of Defense, In Consultation With The Director Of National Intelligence Or The Director Of The Federal Bureau Of Investigation, Reasonably Believes To Be An Entity Owned Or Controlled By, Or Otherwise Connected To, The Government Of A Covered Foreign Country. critical Technology Means— (1) Defense Articles Or Defense Services Included On The United States Munitions List Set Forth In The International Traffic In Arms Regulations Under Subchapter M Of Chapter I Of Title 22, Code Of Federal Regulations; (2) Items Included On The Commerce Control List Set Forth In Supplement No. 1 To Part 774 Of The Export Administration Regulations Under Subchapter C Of Chapter Vii Of Title 15, Code Of Federal Regulations, And Controlled— (i) Pursuant To Multilateral Regimes, Including For Reasons Relating To National Security, Chemical And Biological Weapons Proliferation, Nuclear Nonproliferation, Or Missile Technology; Or (ii) For Reasons Relating To Regional Stability Or Surreptitious Listening; (3) Specially Designed And Prepared Nuclear Equipment, Parts And Components, Materials, Software, And Technology Covered By Part 810 Of Title 10, Code Of Federal Regulations (relating To Assistance To Foreign Atomic Energy Activities); (4) Nuclear Facilities, Equipment, And Material Covered By Part 110 Of Title 10, Code Of Federal Regulations (relating To Export And Import Of Nuclear Equipment And Material); (5) Select Agents And Toxins Covered By Part 331 Of Title 7, Code Of Federal Regulations, Part 121 Of Title 9 Of Such Code, Or Part 73 Of Title 42 Of Such Code; Or (6) Emerging And Foundational Technologies Controlled Pursuant To Section 1758 Of The Export Control Reform Act Of 2018 (50 U.s.c. 4817). interconnection Arrangements Means Arrangements Governing The Physical Connection Of Two Or More Networks To Allow The Use Of Another's Network To Hand Off Traffic Where It Is Ultimately Delivered (e.g., Connection Of A Customer Of Telephone Provider A To A Customer Of Telephone Company B) Or Sharing Data And Other Information Resources. reasonable Inquiry Means An Inquiry Designed To Uncover Any Information In The Entity's Possession About The Identity Of The Producer Or Provider Of Covered Telecommunications Equipment Or Services Used By The Entity That Excludes The Need To Include An Internal Or Third-party Audit. roaming Means Cellular Communications Services (e.g., Voice, Video, Data) Received From A Visited Network When Unable To Connect To The Facilities Of The Home Network Either Because Signal Coverage Is Too Weak Or Because Traffic Is Too High. substantial Or Essential Component Means Any Component Necessary For The Proper Function Or Performance Of A Piece Of Equipment, System, Or Service. (b) Prohibition. (1) Section 889(a)(1)(a) Of The John S. Mccain National Defense Authorization Act For Fiscal Year 2019 (pub. L. 115-232) Prohibits The Head Of An Executive Agency On Or After August 13, 2019, From Procuring Or Obtaining, Or Extending Or Renewing A Contract To Procure Or Obtain, Any Equipment, System, Or Service That Uses Covered Telecommunications Equipment Or Services As A Substantial Or Essential Component Of Any System, Or As Critical Technology As Part Of Any System. The Contractor Is Prohibited From Providing To The Government Any Equipment, System, Or Service That Uses Covered Telecommunications Equipment Or Services As A Substantial Or Essential Component Of Any System, Or As Critical Technology As Part Of Any System, Unless An Exception At Paragraph (c) Of This Clause Applies Or The Covered Telecommunication Equipment Or Services Are Covered By A Waiver Described In Far 4.2104. (2) Section 889(a)(1)(b) Of The John S. Mccain National Defense Authorization Act For Fiscal Year 2019 (pub. L. 115-232) Prohibits The Head Of An Executive Agency On Or After August 13, 2020, From Entering Into A Contract, Or Extending Or Renewing A Contract, With An Entity That Uses Any Equipment, System, Or Service That Uses Covered Telecommunications Equipment Or Services As A Substantial Or Essential Component Of Any System, Or As Critical Technology As Part Of Any System, Unless An Exception At Paragraph (c) Of This Clause Applies Or The Covered Telecommunication Equipment Or Services Are Covered By A Waiver Described In Far 4.2104. This Prohibition Applies To The Use Of Covered Telecommunications Equipment Or Services, Regardless Of Whether That Use Is In Performance Of Work Under A Federal Contract. (c) Exceptions. This Clause Does Not Prohibit Contractors From Providing— (1) A Service That Connects To The Facilities Of A Third-party, Such As Backhaul, Roaming, Or Interconnection Arrangements; Or (2) Telecommunications Equipment That Cannot Route Or Redirect User Data Traffic Or Permit Visibility Into Any User Data Or Packets That Such Equipment Transmits Or Otherwise Handles. (d) Reporting Requirement. (1) In The Event The Contractor Identifies Covered Telecommunications Equipment Or Services Used As A Substantial Or Essential Component Of Any System, Or As Critical Technology As Part Of Any System, During Contract Performance, Or The Contractor Is Notified Of Such By A Subcontractor At Any Tier Or By Any Other Source, The Contractor Shall Report The Information In Paragraph (d)(2) Of This Clause To The Contracting Officer, Unless Elsewhere In This Contract Are Established Procedures For Reporting The Information; In The Case Of The Department Of Defense, The Contractor Shall Report To The Website At Https://dibnet.dod.mil. For Indefinite Delivery Contracts, The Contractor Shall Report To The Contracting Officer For The Indefinite Delivery Contract And The Contracting Officer(s) For Any Affected Order Or, In The Case Of The Department Of Defense, Identify Both The Indefinite Delivery Contract And Any Affected Orders In The Report Provided At Https://dibnet.dod.mil. (2) The Contractor Shall Report The Following Information Pursuant To Paragraph (d)(1) Of This Clause: (i) Within One Business Day From The Date Of Such Identification Or Notification: The Contract Number; The Order Number(s), If Applicable; Supplier Name; Supplier Unique Entity Identifier (if Known); Supplier Commercial And Government Entity (cage) Code (if Known); Brand; Model Number (original Equipment Manufacturer Number, Manufacturer Part Number, Or Wholesaler Number); Item Description; And Any Readily Available Information About Mitigation Actions Undertaken Or Recommended. (ii) Within 10 Business Days Of Submitting The Information In Paragraph (d)(2)(i) Of This Clause: Any Further Available Information About Mitigation Actions Undertaken Or Recommended. In Addition, The Contractor Shall Describe The Efforts It Undertook To Prevent Use Or Submission Of Covered Telecommunications Equipment Or Services, And Any Additional Efforts That Will Be Incorporated To Prevent Future Use Or Submission Of Covered Telecommunications Equipment Or Services. (e) Subcontracts. The Contractor Shall Insert The Substance Of This Clause, Including This Paragraph (e), In All Subcontracts And Other Contractual Instruments, Including Subcontracts For The Acquisition Of Commercial Items. (end Of Clause) 52.204-26 Covered Telecommunications Equipment Or Services-representation (dec 2019) (a) Definitions. As Used In This Provision, “covered Telecommunications Equipment Or Services” Has The Meaning Provided In The Clause 52.204-25, Prohibition On Contracting For Certain Telecommunications And Video Surveillance Services Or Equipment. (b) Procedures. The Offeror Shall Review The List Of Excluded Parties In The System For Award Management (sam) (https://www.sam.gov) For Entities Excluded From Receiving Federal Awards For “covered Telecommunications Equipment Or Services”. (c) Representation. The Offeror Represents That It □ Does, □ Does Not Provide Covered Telecommunications Equipment Or Services As A Part Of Its Offered Products Or Services To The Government In The Performance Of Any Contract, Subcontract, Or Other Contractual Instrument. (end Of Provision)

Details: Description Republic Of The Philippines Batangas State University Batangas City Request For Quotation "procurement Of Various And Equipment For Central Offices (office Supplies)" 1. The Batangas State University (batstate U) Through The Bids And Awards Committee Invites Interested Firms/supplier To Submit Quotation For The Project "procurement Of Various And Equipment For Central Offices (office Supplies)" With An Approved Budget For The Contract (abc) Seven Hundred Twenty-seven Thousand Eight Hundred Six Pesos And Ten Centavos Only (php 727,806.10). Quotation Received In Excess Of The Abc Shall Be Automatically Rejected At The Opening. Item No. Qty Description Total 1 15 Piece Arch File Folder Arch File Folder 8.5x13 2,160.00 2 133 Ream Bond Paper A4, 80gsm, Size: 210mm X 297mm, 500 Sheets Per Ream 33,375.02 3 16 Ream Bond Paper Multi-purpose Size: A3 Thickness: 80gsm Others: 420mm X 297mm 11,200.00 4 53 Ream Bond Paper Multi-purpose Size: Short (8.5 X 11) Thickness: 80gsm 12,084.00 5 205 Ream Bond Paper Multi-purpose (copy), 70gsm, Long (8.5 X 13), 500 Sheets Per Ream 48,482.50 6 69 Ream Bond Paper Multi-purpose (copy), A4, 70gsm, 500 Sheets Per Ream 14,421.00 7 734 Ream Bond Paper Long Size: Long (8.5 X 13) Thickness: 80gsm 196,469.78 8 110 Piece Brown Envelope Long 650.10 9 5 Piece Cutter S Cutter 15cm 195.00 10 10 Pack Cable Tie 10" 2,280.00 11 2 Unit Calculator Specs: • Power Supply: Solar & Battery • Number Of Digits: 12 Digits • Size (d × W × H): 147 × 106.5 × 29 Mm 700.00 12 10 Piece Chalk Marker (white) Bullet Tip 1.8mm-2.5mm Color: White 1,815.00 13 11 Pack Clear Sheet Protector Size: 8.5 X 13 100 Sheets Per Pack 4,235.00 14 2 Piece Clearbook 20 Transparent Pockets, For A4 Size, Refillable 80.00 15 24 Piece Clearbook 20 Transparent Pockets, Legal, Refillable 1,296.00 16 5 Piece Click Gel Ballpen Black 210.00 17 56 Box Clip Backfold (binder Clip) All Metal, Clamping, 32 Mm (-1mm) / 1 1/4", 12 Pcs Per Box 2,402.40 18 59 Box Clip Backfold (binder Clip) All Metal, Clamping, 19mm (-1mm) / 3/4, 12 Pieces Per Box 1,362.90 19 47 Box Clip Backfold (binder Clip) All Metal, Clamping, 25mm (-1mm) / 1", 12 Pieces Per Box 1,410.00 20 6 Box Clip Backfold (binder Clip) All Metal, Clamping, 41mm (-1mm) / 1 5/8", 12 Pcs Per Box 336.00 21 61 Box Clip Backfold (binder Clip) All Metal, Clamping, 50mm (-1mm) / 2", 12 Pcs Per Box 5,233.80 22 2 Piece Clipboard Size: 8.5 X 13 Plastic Material 168.00 23 5 Piece Correction Tape Correction Tape 5mm X 8m 5mm Wide 8m Long Clear Casing 145.00 24 14 Piece Cutter Small 140.00 25 5 Piece Cutter/utility Knife For General Purpose 550.00 26 148 Piece Data File Box Made Of Chipboard, With Closed Ends 32,560.00 27 3 Piece Desk Organizer Stainless Steel Metal Mesh Pen 450.00 Page 1 Of 6 Item No. Qty Description Total And Supplies Holder Desk Organizer 28 2 Box Diazo Paper 20 X 30 (660 Sheets) 17,000.00 29 2 Piece Document Tray Home Office Organizer -4 Slot Horizontal Document Tray - A4 Table Tray Stationery File -desk Drawer Container Holder Shelf Case Desktop 2,000.00 30 33 Piece Double Sided Tape Foam Type, 1/2" 1,980.00 31 33 Piece Double Sided Tape Width Size: 1/2 1,824.90 32 11 Box Envelope Brown, Expanding, Kraft, Legal, 100 Pieces Per Box 17,847.50 33 3 Box Envelope Documentary, For A4 Size Document, Brown, 500 Pieces Per Box 3,894.00 34 10 Box Envelope Documentary, For Legal Size Document, Brown, 500 Pieces Per Box 14,300.00 35 2 Box Envelope Mailing, White, With Window 1,650.00 36 25 Piece Envelope Brown, Expandable, Legal 600.00 37 19 Piece Envelope Expanding, Plastic, 0.50mm Thickness Min 912.00 38 20 Piece Envelope Vertical Envelope White Or Cream 12" X 9" 150.00 39 4 Piece Eraser Felt, For Blackboard/whiteboard 80.00 40 41 Piece Eraser Plastic Or Rubber 820.00 41 59 Box Fastener Fastener, Metal,non-sharp Edges, 70mm Between Prongs, 50 Sets Per Box 5,605.00 42 20 Set File Tab Divider Bristol Board, A4 560.00 43 31 Box Folder Folder, Pressboard, Size: 240mm X 370mm (-5mm) Color: White With Green 61,380.00 44 1 Pack Folder Folder With Tab Size: A4 100 Pcs Per Pack 632.50 45 28 Pack Folder Folder With Tab Size: Legal 100 Pcs Per Pack 18,480.00 46 2 Pack Folder L-type, Plastic, For Legal Size Documents, 50 Pieces Per Pack 990.00 47 90 Piece Folder Expandable Long,color: White With Green 1,800.00 48 20 Piece Folder Ordinary, Long, Tagboard 140.00 49 1 Box Gel Pen Type Of Pen: Gel Ink Color: Blue Others: 0.5 Mm 600.00 50 53 Pack Glossy Photo Sticker Paper -a4 210x297 Mm -20 Sheets -135gsm. -5760dpi 6,360.00 51 2 Bottle Glue All, Purpose, Gross Weight : 130 Grams Min 140.00 52 17 Jar Glue All Purpose, Gross Weight: 200 Grams Min. 2,040.00 53 5 Piece Glue 240ml 750.00 54 4 Piece Glue Gun Small 560.00 55 50 Piece Glue Stick Small 350.00 56 15 Piece Highlighter Liquid Chalk Marker Pens Package Quantity:1pcs Size:3mm 6mm Color:green Red Blue Pink Orange Purple Yellow White Note: Cap Design, Comes With A Pen Holder, Simple And Stylish Easy To Carry, Easy To Damage, Good Sealing. Pen Style Design, Round High-strength Pen, Compression And Depression, So Feel More 975.00 Page 2 Of 6 Item No. Qty Description Total Comfortable. Pigment-type High-quality Fluorescent Ink, The Color Is Beautiful And Easy To Dry Ink Does Not Fade. 57 122 Piece Lever Arch File Data Folder Made Of Chipboard, Taglia Lock 17,446.00 58 4 Piece Lever Arch File Binder Long - 3 Inches Color: Blue 576.00 59 40 Piece Lever Arch File Binder Long - 3 Inches Color: Red 5,760.00 60 1 Bundle Looseleaf Cover Made Of Chipboard, Thickness: 1.5mm, For Legal Size Documents, Capable Of Filing Minimum Of 45mm Thickness Of 70gsm Paper, 50 Sets Per Bundle 2,310.00 61 9 Piece Marker Whiteboard, Blue, Bullet Type 540.00 62 3 Piece Marker Whiteboard, Red, Bullet Type 180.00 63 15 Piece Magazine File Box Large Size, Made Of Chipboard 1,980.00 64 2 Box Mailing Envelope Mailing, White, 80gsm (-5%) 1,386.00 65 88 Piece Mailing Envelope White 264.00 66 2 Box Marker Whiteboard, Blue,12 Pcs Per Box 1,200.00 67 43 Piece Marker Permanent, Black, Broad Type 2,064.00 68 24 Piece Marker Permanent, Black, Bullet Type 871.20 69 6 Piece Marker Permanent, Blue, Bullet Type 228.00 70 9 Piece Marker Permanent, Red, Bullet Type 326.70 71 77 Piece Marker Whiteboard, Black, Bullet Type 4,620.00 72 30 Set Marker Fluorescent, 3 Assorted Colors Per Set 2,490.00 73 10 Roll Masking Tape 3/4 300.00 74 6 Piece Memo Folder Size: 14"x9.5" Fabric: Denise Red With Foam Print Process" 1 Color, 1 Side Dtf Print Inside Size: 13.5"x9" Pasteboard: 400 Gsm Fabric: Satin White Memo Corner: Metallic Ribbon 3,900.00 75 36 Pad Note Pad Stick On, 50mm X 76mm (2" X 3") Min 1,944.00 76 41 Pad Note Pad Stick On, 76mm X 100mm (3" X 4") Min 2,665.00 77 70 Pad Note Pad Stick On, 76mm X 76mm (3" X 3") Min, 100 Sheets Per Pad 4,200.00 78 1 Pack Notebook Filler, 50pcs Per Pack 550.00 79 4 Piece Notebook Stenographer, Spiral, 40 Leaves 96.00 80 6 Piece Notepad 50 Leaves Per Pad, 4"x6" 240.00 81 136 Pack Oslo Paper Long 8.5"x13" 10,880.00 82 18 Pack Photo Paper Matte 220gsm 3,240.00 83 1 Piece Puncher Heavy Duty Metal, With Adjustable Paper Guide, With Two Hole Guide 250.00 84 2 Pack Pvc Legal Size 10pc/pack 288.00 85 1 Box Pvc Cover A4, 200 Mic 605.00 86 5 Box Pvc Cover Long, 200 Mic 3,300.00 87 17 Pack Page Markers Assorted Neon, 5 Pads/pack, 100 Markers/pad, 2"x 0.5" 1,700.00 88 61 Box Paper Clip Vinyl/plastic Coated, 33mm, 100 Pcs Per Box 944.89 89 55 Box Paper Clip Vinyl/plastic Coated, 48mm, 100 Pcs Per Box 1,650.00 90 51 Box Paper Clip Vinyl/plastic Coated, 50mm, 100 Pcs Per Box 1,530.00 91 295 Piece Pen Ink Color: Black Tip: 0.5mm, Ballpoint Type 3,540.00 92 10 Piece Pen Ink Color: Black Tip: 0.7mm, Ballpoint Type 120.00 93 9 Piece Pen Ink Color: Blue Tip: 0.5mm, Ballpoint Type 108.00 Page 3 Of 6 Item No. Qty Description Total 94 29 Piece Pen Ink Color: Red Tip: 0.5mm, Ballpoint Type 348.00 95 4 Piece Pen Holder Can Hold Multiple Pens, Markers And Highlighters. Made Of Plastic; Available In White And Dark Blue Item Dimension: 5.5 X 5.5 X 9 Cm 400.00 96 28 Box Pencil With Eraser, 12 Pcs Per Box 2,800.00 97 2 Piece Pencil Lead/graphite, With Eraser 24.00 98 45 Pack Photo Paper Matte 180gsm 4,500.00 99 30 Piece Plastic Envelope Expandable Long Plastic Envelope With Handle And Push Lock 2,400.00 100 6 Box Push Pin Hammer Head Type, 100s / Box 240.00 101 5 Kilogram Rags All Cotton, 1 Kilo Per Bundle Or 32 Pieces Per Kilogram Min 440.00 102 40 Book Record Book Atleast 300 Pages, Size: 214mm X 278mm Min 7,200.00 103 3 Piece Record Book Junior Size 200 Pages 324.00 104 17 Piece Refillable Clear Book Legal Size; High Quality Refillable 3,085.50 105 2 Bundle Ring Bind Element 25mm 8pcs/bundle 512.00 106 10 Piece Ring Bind Element 1/4 360.00 107 10 Piece Ring Bind Element 3/4 360.00 108 26 Piece Ring Bind Element Size: 1/2", Black 546.00 109 36 Piece Ring Bind Element Size: 2, Black 2,376.00 110 56 Piece Ring Bind Element Size:1", Black 2,032.80 111 5 Bundle Ring Binder 80 Rings, Plastic, 32mm X 1.12m Plastic, 32 Mm, 10 Pieces Per Bundle 2,700.00 112 9 Box Rubber Band 70mm Min Lay Flat Length (no. 18), 350g 1,440.00 113 5 Piece Ruler Plastic Ruler 12 Transparent 86.00 114 9 Piece Ruler Plastic, 450mm (18") Width: 38mm Min. 360.00 115 30 Pack Sticker Paper Glossy, A4 1,500.00 116 2 Piece Scissor Heavy Duty, Stainless 844.80 117 1 Piece Scissors Symmetrical, Blade Length: 65mm Min 120.00 118 4 Piece Sign Pen Black, 0.3 Needle Tip, Gel Ink 160.00 119 174 Piece Sign Pen Black, 0.5 Needle Tip, Gel Ink 6,022.14 120 123 Piece Sign Pen Blue, 0.3 Needle Tip, Gel Ink 4,920.00 121 179 Piece Sign Pen Blue, 0.5 Needle Tip, Gel Ink" 6,195.19 122 78 Piece Sign Pen Red, 0.5 Needle Tip, Gel Ink" 2,699.58 123 11 Piece Sign Pen Sign Pen (black, 5mm Needle Tip, Gel Ink) 1,188.00 124 16 Piece Sign Pen Type Of Pen: Sign Pen Color: Black Tip: 1 Mm 2,000.00 125 24 Piece Sign Pen Type Of Pen: Sign Pen Color: Blue Tip: 1 Mm 3,000.00 126 10 Pack Specialty Board Paper Long 8.5 X 13 200gsm 600.00 127 15 Pack Specialty Paper 8.5 X 11 Inches (short) 750.00 128 78 Pack Specialty Paper Size: A4 Color: White Thickness: 90gsm 2,340.00 129 24 Pack Specialty Paper Size: Legal Color: Cream Thickness: 90gsm 1,200.00 130 44 Pack Specialty Paper Size: Legal Size Color: White Thickness: 90gsm Sheets: 10pcs. Per Pack 2,200.00 131 8 Pack Specialty Paper Size:a4 Color:cream Thickness:90gsm 240.00 132 3 Piece Stamp Pad Felt, Bed Dimension: 60mm X 100mm 144.00 133 9 Bottle Stamp Pad Ink Violet, 50 Ml 346.50 134 7 Piece Stamp Pad Ink Red 280.00 135 1 Piece Staple Remover 20.00 Page 4 Of 6 Item No. Qty Description Total 136 9 Piece Staple Remover Plier Type 544.50 137 44 Box Staple Wire Standard, (26/6) #35 1,936.00 138 2 Piece Stapler Size : 125mm X 36mm X 55mm (lwh) Staples: : No. 35 (26/6), No. 3 (24/6) Throat Depth: : 64 Mm Load Capacity : 100 Staples Stapling Capacity : 2-30 Sheets Of 70 G/m2 Paper Color : Blue, Black, And Gray 800.00 139 1 Piece Stapler Compatible With No. 35 Staple Wire Size Stapling Capacity: Up To 30 Sheets With Built-in Staple Remover 385.00 140 69 Pack Sticker Paper Matte, A4 2,898.00 141 108 Pack Sticky Notes Arrow Flags 1/2 Inch Wide Assorted Colors 5 Pads Per Pack 4,489.56 142 39 Pad Sticky Notes Size: 3"x3", 75 To 80gsm Paper 100 Sheets Per Pad Material: Paper, Glue Color: Yellow, Orange Or Green 1,950.00 143 78 Piece Tape Transparent, 24mm 2,933.58 144 28 Piece Tape Double Adhesive Tape, 1" 1,008.00 145 10 Piece Tape Masking,1/2" 400.00 146 10 Piece Tape Masking, 48 Mm 800.00 147 24 Roll Tape Masking Width Size: 1" At Least 50 Yards 1,200.00 148 28 Roll Tape Packaging Width Size: 24mm At Least 50 Yards 1,152.76 149 70 Roll Tape Transparent Type: Clear Width Size: 2 Inches Circumference Size: At Least 50 Yards 3,150.00 150 99 Roll Tape Transparent, 1/2" 1,980.00 151 1 Piece Tape Dispenser Table Top, For 24mm Width Tape 150.00 152 5 Pack Vellum Board - 200gsm; Specialty Board Paper; Acid-free; Size: A3; 10 Sheets/pack 420.00 153 49 Pack Vellum Board - 220gsm - Specialty Board - Vellum Board - Board Paper - Acid-free - Size: Long (8.5"x13") - 10 Sheets/pack 2,695.00 154 5 Pack Vellum Board - 220gsm - Specialty Board - Vellum Board - Board Paper - Acid-free - Size: Short (8.5"x11") - 10 Sheets/pack 250.00 155 49 Pack Vellum Board 220gsm, Specialty Board, Board Paper, Acid-free, A4,10 Sheets/pack 4,116.00 156 5 Pack Vellum Boards Size: A4 150.00 157 6 Pad Yellow Paper 288.00 158 12 Box Black Ballpen Type Of Pen: Ball Point Color:black 1,680.00 Note: Kindly Indicate The Brand On Your Quotation. 2. Philgeps Registration Certificate And Other Business Permits Shall Be Attached Upon Submission Of The Quotation. 3. The Quotation Must Be Submitted (can Also Be Send Thru Fax And Email At The Contact Details Listed Below) Or To The Rizal Avenue Extension, Batangas City And Shall Be Received By The Committee On Or Before 5:00 Pm Of January 20, 2025. Page 5 Of 6 E-mail : Procurement.central.external@g.batstate-u.edu.ph 4. The Bsu Reserves The Right To Reject Any Or All Quotations And/or Proposals And Waive Any Formalities/informalities Therein And To Accept Such Bids It May Consider As Most Advantageous To The Agency And To The Government. Batstate U Neither Assumes Any Obligation For Whatsoever Losses That May Be Incurred In The Preparation Of Bids, Nor Does It Guarantee That An Award Will Be Made. Mr. Jonas Erik L Ebora Assistant Director, Procurement Rizal Avenue Extension, Batangas City 980-0385 Loc. 1230

Description: U.s. Department Of State bureau Of International Narcotics And Law Enforcement Affairs (inl) you Have Received This "personal Services Contractor” (psc) Solicitation Through The Department Of State (dos) Internet Site. If You Have Any Questions Regarding This Psc, You May Contact The Dos Official Named In This Solicitation. The Department Is Not Responsible For Any Data And/or Text Not Received When Retrieving This Document Electronically. Amendments To Solicitation Documents Generally Contain Information Critical To The Submission Of An Application. position Title: Senior Cybercrime Advisor location: Abuja, Nigeria salary Level: Fs-02 - $101,395 - $148,902 (equivalent Gs-14) period Of Performance: The Period Of Performance For This Contract Is Twelve (12) Months From The Date Of Award With Four (4) Optional One-year Extensions. issuance Date: 01/08/2025 closing Date: 01/30/2025 closing Time: 3:00 Pm Et solicitation Number: Psc-25-013-inl job Description: See Below dear Prospective Offerors: the Department Of State Is Seeking Offers From Qualified U.s. Citizens To Provide Personal Services For The Subject Position Under A Personal Services Contract, As Described In This Solicitation. Submittals Must Be In Accordance With The Attached Information At The Place And Time Specified. Applicants Interested In Applying For This Position Must Submit The Following Materials: 1. Form Sf 171 (completed And Signed) 2. Complete Resume. In Order To Fully Evaluate Your Offer Your Resume Must Include: a. Paid A Non-paid Experience, Job Title, Location(s), Dates Held (month/year), And Hours Worked Per Week For Each Position. Dates (month/year) And Locations For Any Overseas Experience Must Also Be Detailed. Any Experience That Does Not Include Dates (month/year), Locations, And Hours Per Week Will Not Be Counted Towards Meeting The Solicitation Requirements. b. Specific Duties Performed That Fully Detail The Level And Complexity Of The Work. c. Names And Contact Information (phone And Email) Of Your Current And/or Previous Supervisor(s). d. Education And Any Other Qualifications Including Job-related Training Courses, Job-related Skills, Or Job-related Honors, Awards Or Accomplishments. e. U.s. Citizenship note: Resume Must Contain Explicit Information To Make A Valid Determination That The Candidate Meets The Experience Requirements As Stated In This Solicitation. This Information Needs To Be Clearly Identified In The Resume. Failure To Provide Explicit Information To Determine Qualifications For The Position Will Result In Loss Of Full Consideration. 3. Evaluation Factor Document Specifically Addressing: Each Of The Evaluation Factors Shown In The Solicitation Below. Responses Must Be Limited To 500 Words Per Evaluation Factor. Any Additional Words Above The Limit Will Neither Be Read Nor Scored. note: The Evaluation Factors Are Worth 70 Out Of 100 Points. Offerors Are Required To Address Each Of The Evaluation Factors In A Separate Document Describing Specifically And Accurately What Experience, Training, Education And/or Awards They Have Receive That Are Relevant To Each Factor. 4. Professional References: Three (3) Names And Contact Information (phone And Email) Of Current And/or Previous Supervisors To Serve As Professional References. additional Documents Submitted Will Not Be Accepted. Incomplete Or Late Offers Will Not Be Considered. Complete Applications Must Be Emailed To: Cecille D. Washington U.s. Department Of State Inl/ex/gapp Washingtoncd@state.gov sincerely, margaret R. Gaudreau contracting Officer u.s. Department Of State subject a Solicitation For A Personal Services Contractor (psc), Department Of State (dos), Bureau For International Narcotics And Law Enforcement Affairs (inl). the United States Government (usg), Represented By The Dos, Seeks Applications From Us Citizens Interested In Providing Psc Services As Described In This Solicitation. pre-award Ethical Responsibilities Of Psc (jun 2011) this Solicitation May Result In The Award Of One Or More Personal Services Contracts As Defined In Far 2.101. Prior To Contract Award, All Offerors Or Quotes Must Advise The Cognizant Contracting Officer If They Have A Personal Conflict Of Interest, Such As A Financial Conflict, That Would Prevent Them From Either Meeting The Requirements Of The Clause Entitled, “post-award Ethical Responsibilities Of Personal Services Contractors,” Or Otherwise Objectively Performing Their Contractual Duties Upon Contract Award. how To Apply offerors Proposal Shall Be In Accordance With The Requirements Stated In This Solicitation At The Place And Time Specified. A Proposal Will Be Determined Non-responsive And Ineligible For Consideration Unless All Required Documents And Information Are Included In The Submission. Offerors Shall Ensure Their Resume Demonstrates Their Possession Of The Minimum Qualifications Outlined In This Solicitation, As Well As Their Ability To Fulfill All Required Duties. The Government Is Not Responsible For Any Costs Incurred By The Offeror During The Solicitation Process. note Regarding Government Obligations For This Solicitation this Solicitation In No Way Obligates The Department Of State To Award A Psc Contract, Nor Does It Commit The Department Of State To Pay Any Cost Incurred In The Preparation And Submission Of The Application. proposals Must Include The Following And Not Exceed Twenty (20) Pages (additional Pages Will Not Be Accepted Or Reviewed): 1. Form Sf 171 (completed And Signed) 2. Resume 3. Evaluation Factor Responses 4. Three (3) Names And Contact Information (phone And Email) Of Current And/or Previous Supervisors To Serve As Professional References. note: Your Resume Should Contain Explicit Information To Make A Valid Determination That You Fully Meet The Experience Requirements As Stated In This Solicitation. This Information Should Be Clearly Identified In Your Resume. Failure To Provide Explicit Information To Determine Your Qualifications For The Position Will Result In Loss Of Full Consideration. Additional Documents Submitted Beyond The Requirements Will Not Be Accepted Or Reviewed. *** One Pdf Attachment Is Highly Recommended veteran’s Preference veteran’s Preference Is Not Applicable To This Position Therefore Do Not Submit Dd-214. all Qualified Applicants Will Be Considered Regardless Of Age, Race, Color, Sex, Creed, National Origin, Lawful Political Affiliation, Nondisqualifying Disability, Marital Status, Sexual Orientation, Affiliation With An Employee Organization, Or Other Non-merit Factor. equal Employment Opportunity Policy - The United States Government Does Not Discriminate In Employment On The Basis Of Race, Color, Religion, Sex (including Pregnancy And Gender Identity), National Origin, Political Affiliation, Sexual Orientation, Marital Status, Disability, Genetic Information, Age, Membership In An Employee Organization, Retaliation, Parental Status, Military Service Or Other Non-merit Factor. submit Proposal Via E-mail To The Attention Of: inl/cecille Washington e-mail: Washingtoncd@state.gov direct Questions Regarding This Solicitation To: inl/cecille Washington e-mail: Washingtoncd@state.gov inl Will Not Accept Proposals Beyond The Closing Time/date; Unless It Can Be Determined Dos Mishandled The Proposal. general Statement Of The Purpose Of This Contract mission Of The U.s. Department Of State: The U.s. Department Of State Is The Lead Institution For The Conduct Of American Diplomacy And The Secretary Of State Is The President’s Principal Foreign Policy Advisor. The Department Of State’s Mission Is To Advance U.s. National Security Interests, Fight Terrorism, Protect U.s. Interests Abroad, And Implement Foreign Policy Initiatives That Build A Freer, Prosperous, And Secure World. mission Of The Bureau Of International Narcotics And Law Enforcement Affairs (inl): The Bureau Of International Narcotics And Law Enforcement Affairs (inl) Is Part Of The Under Secretariat For Civilian Security, Democracy, And Human Rights (j) Within The Department Of State (dos). Inl’s Mission Is To Minimize The Impact Of International Crime And Illegal Drugs On The United States And Its Citizens By Providing Effective Foreign Assistance And Fostering Global Cooperation. inl’s Office Of Africa And The Middle East Programs (inl/ame) Develops And Manages Criminal Justice Sector Reform Programs And Contributes To Policy Formation On Civilian Security Issues In Both Regions. Inl Works To Improve The Effectiveness, Responsiveness, And Accountability Of Criminal Justice Sector Institutions (police, Justice Sector Actors, And Corrections). These Efforts Are Designed To Improve Stability, Human Rights, And Good Governance In Close Partnership And Cooperation With Host Government And Civil Society Actors. inl Has Program Authority Derived From The Foreign Assistance Act Of 1961, As Amended (faa). Under The Faa, Inl Is Responsible For Providing Assistance To Host Governments To Develop And Implement Effective Counter Narcotics, Anticrime, And Border Control Programs. the Purpose Of This Personal Services Contract Is To Fill The New Position Of Senior Cybercrime Advisor (senior Advisor) To The Inl Section At The U.s. Embassy In Abuja, Nigeria. The Senior Cybercrime Advisor’s Primary Responsibility Will Be To Support, Assist, And Advise The Inl Nigeria Director, The Inl Nigeria Deputy Director, The U.s. Embassy In Abuja, And The Inl/ame Nigeria Program Officer With Efforts To Build Inl Relationships With And Assist In The Coordination, Development, Training, Project Management, Technical Assistance, And General Capacity Building Involved With Inl’s Multiple Cybercrime And Information Technology (it)-based Initiatives In Nigeria. Inl Initiatives Involve Building Relationships And Coordinating Efforts With The Nigeria Police Force (npf), The Nigeria Security And Civil Defense Corps (nscdc), The Ministry Of Justice (moj), The Economic Financial Crimes Commission (efcc), The Nigeria Correctional Service (ncos), Nigeria’s National Agency For The Prevention Of Trafficking In Persons (naptip), The Office Of National Security Advisor (onsa), Among Others. As Inl’s Primary Poc For Nigerian Justice And Law Enforcement Agencies On Cybercrime, The Senior Advisor Shall Provide Subject Matter Expertise To Nigerian Government Agencies On Adopting And Implementing Laws, Policies, And International Best Practices And Procedures For Combatting Cybercrime And Ensuring Communication And Collaboration Between Nigerian Government On Select Programs And Application Designed To Facilitate Improved Criminal Justice Practices, As Well As Adoption And Adherence To International Best Practices And Policies. The Senior Advisor Shall Also Advise Law Enforcement And Justice Sector Training Academies And Staff, Through Direct And Continuous Engagement, On Development And Implementation Of Improved Training, Course Curricula, Instructor Development, Training Materials, And Training Requirements To Facilitate Success Of The Inl Nigeria Program. the Senior Advisor Shall Be Responsible For Monitoring, Advising, And Collaborating With Inl Project Coordinators, Inl Project Partners, And Inl’s Implementing Personnel To Ensure High Quality Training, Equipment, And Technical Assistance To Nigerian Justice And Law Enforcement Agencies, As Well As Proper Design And Implementation Of Projects To Foster Institutional Capacity And Professionalization In Addressing Cybercrime And Inl-sponsored It Initiatives. Such Partners And Implementers Include Industry Partners, Un Office On Drugs And Crime (unodc), International Office Of Migration (iom), Public And Private Development Centre, Among Other Implementers. The Senior Advisor Shall Also Foster Among Nigerian Law Enforcement Adherence To Human And Constitutional Rights, International Best Practices For Cyber Investigations, And Maintaining Good Relations With The Nigerian Public. The Senior Advisor Shall Advise Nigerian Justice And Law Enforcement At The Executive And Mid-level Leadership Levels, Offering Technical Assistance At Multiple Levels On The Management, Operations, Logistics, Personnel Management, And Administration Of Cybercrime And It-related Initiatives. The Senior Advisor Shall Also Assist In Strengthening Nigerian Government Accountability And Protection Mechanisms For Officials’ And Citizens’ Personally Identifiable Information, As Well As Accountability And Disciplinary Mechanisms For Those Government Officials And Law Enforcement Officers Who Commit Crimes Or Misconduct. The Position Will Require Close Coordination With Moj, Onsa, Npf, Efcc, Ncos, Naptip, And Other Relevant Nigerian Ministries And Agencies. additionally, The Senior Advisor Will Advise On Wide-ranging Policy And Technical Cybercrime And It-related Matters Relative To U.s. Contributions And Participation In Cyber-related Projects, Civilian Public Security/police Operations, And Security Sector Reform. The Senior Advisor Shall Also Stay Current On Cyber Developments In Nigeria And Proactively Seek Answers To Questions Posed By The Inl Director, Inl Deputy Director, Inl/ame Program Office, Embassy Officials, And Other U.s. Government Visitors To The Embassy. The Senior Advisor Will Support Inl With Professional Analyses And Advice Regarding Nigerian Efforts To Address And Combat Cybercrime Domestically And Nigerian Participation In International Fora Related To Cybercrime, In Addition To International And U.s. Professional Standards And Best Practices For Cyber Space. The Senior Advisor Shall Also Facilitate The Development And Implementation Of Supplemental Efforts To Build The Institutional Capacity And Professionalization Of Nigeria Government Agencies Addressing Cybercrimes. These Efforts Will Require Close Collaboration With The Inl’s Senior Law Enforcement Advisor, Senior Counter-narcotics And Transnational Crime Advisor, The Senior Justice Advisor, And Other Members Of The Inl Nigeria And U.s. Mission In Nigeria. duties & Responsibilities under The Direct Supervision Of The Abuja Inl Director Or His/her Designee, The Senior Cybercrime Advisor Will Perform The Following Duties: assess & Advise: • Provide Advice And Technical Assistance To The Moj, Onsa, Npf, Nscdc, Ncos, Efcc, Naptip, And Other Nigerian Justice And Law Enforcement Agencies At The Executive, Middle Management, First Line Supervisors, And Rank-and-file, As Well As Other Relevant Nigerian Government Stakeholders On Best Practices And International Standards To Combat And Prevent Cybercrime And Financial Crimes (including Those Involving Cryptocurrency), Implement Cybersecurity, And Develop It-related Solutions For Official Nigerian Government Use. • Provide Advice And Technical Assistance To The Moj, Npf, Nscdc, Ncos, Efcc, Naptip, And Other Nigerian Justice And Law Enforcement Agencies At The Executive, Middle Management, First Line Supervisors, And Rank-and-file, As Well As Other Relevant Nigerian Government Stakeholders On Adopting And Implementing Laws, Policies, And International Best Practices And Procedures For Combatting Cybercrime And Implementing It-related Applications And Programs To Facilitate Improved Criminal Justice Practices, As Well As Adoption And Adherence To International Best Practices And Policies. • Provide Expert Advice And Technical Assistance To The Moj, Npf, Nscdc, Ncos, Efcc, Naptip, And Other Nigerian Justice And Law Enforcement Agencies, And Relevant Gon Stakeholders On Program Design And Functionality, And When Necessary, Provide Recommendations To Revise Criminal Justice Information Management Systems To Facilitate Improved User Interface, Compatibility Across Agencies, Or General Improvements On The Programs (e.g., Cims [corrections Information Management System]. • Provide Expert Advice And Technical Assistance To The Moj, Npf, Nscdc, Ncos, Efcc, Naptip, And Other Nigerian Justice And Law Enforcement Agencies, And Relevant Gon Stakeholders In Development To Establish And Maintain A System To Protect Nigerian Citizens’ Personally Identifiable Information. • Advise And Assist The Onsa, Moj, Npf, And Other Nigerian Government Agencies In Developing And Implementing Strategy And/or Operational Plan For Cybercrime And Government Law Enforcement It Databases, Applications, And Solutions. • Advise And Assist The Onsa, Moj, Npf And Relevant Gon Stakeholders On The Development Of Standard Operating Procedures (sops), And Foster A Proactive Operational Strategies, Logistical Support, And Continuous Education Program To Improve The Effectiveness, Professionalism, And Management Of The Nigerian Agencies’ Cybercrime And It-related Applications, Tools, Policies, And Procedures. • Participate In The Continual Analysis And Evaluation Of Nigeria’s Justice And Law Enforcement Institutions, Including Assessments Of The Organizational And Operational Capacities Of The Various Elements Related To Justice And Law Enforcement Operations, Management, Administration, Logistics, And Other Aspects Related To Combatting Cybercrime, And Adoption Of It-related Applications. political Liaison: • Establish And Maintain Lines Of Communication With Relevant Partner Country Stakeholders To Advance Inl Program Objectives And U.s. Government Stabilization Objectives To Include Facilitating Meetings And Information Flows Between All Parties Responsible For Efforts And Projects Related To Cybercrime And Criminal Justice It Applications, Tools, And Systems. • Generate Support For And Advance U.s. Policy Objectives With Key Host Government Officials, Under The Direction Of The Inl Director Or Designee And In Coordination With The Inl Nigeria Program Officer And Other Inl Implementers. planning, Development, & Execution: • Visit, Review, And Analyze The Capabilities Of Justice And Law Enforcement-related Training Facilities And Educational Institutions That Work With Inl Nigeria-supported Projects, And Advise On Potential Projects, Activities, And Events To Increase Capabilities Of Justice And Law Enforcement Entities To Combat Cybercrime And Adopt It Solutions. • Ensure That Training Materials Are Approved By The Leadership Of Entities, The Moj, And Other Relevant Nigerian Government Offices And Agencies. Training Modules Shall Complement Other Inl-funded Training And Adhere To International And U.s. Professional Standards And Best Practices. • Advise Senior Justice And Law Enforcement Officials, Logistics And Deployment Managers, Training Managers, And Trainers To Build On Existing Capacity And Current Processes To Combat Cybercrime. Provide Expert Advice And Recommendations On Training And Equipment Needs Of And Procedural Gaps For Justice And Law Enforcement Agencies. • Identify Technical Areas In Which Inl Training Or Other Programmatic Intervention Could Be Beneficial To The Overall Goals Of U.s. And Inl Cybercrime Initiatives. • Monitor Implementing Partners Funded By Inl To Facilitate The Development, Training, Support, And Sustainability Of The Cyber-related Initiatives And Efforts In Nigeria. Work Closely With Implementers’ Staff To Identify And Address Obstacles, Delays, And Other Challenges To Project Implementation. • Recommend Efforts And Initiatives; Facilitate And Perform Follow-on Activities To Encourage The Host Government’s Adoption Of International And U.s. Professional Standards And Best Practices Regarding Cybercrime And It Adoption. • Monitor And Report On Significant Activities And Developments Related To Adoption Of International And U.s. Professional Standards And Best Practices Related To Cybercrime. • Evaluate Results And Outcomes Of Initiatives, Determine Obstacles And Challenges To Adoption Of Professional Standards And Best Practices And As Necessary Make Mid-course Adjustments In Initiatives; When Complete, Provide A Final Report For Review Of Inl Nigeria Director, The Inl Nigeria Program Officer, And The Inl Cyber Team. program Development & Implementation: • Collaborate With Onsa, Moj, Npf, And Other Criminal Justice Agencies On Addressing Issues Identified Through Technical Assistance And Advising Activities, Including Organizing Logistics And Recommending Nigerian Or External Experts. Arrange Training For Gon Agencies In Areas Of Particular Focus, As Determined With Inl Nigeria Director And Inl Nigeria Program Officer. • Monitor And Evaluate Implementing Partners Funded By Inl To Facilitate The Development, Training, Support, And Sustainability Of Cyber Related Initiatives And Projects. Work Closely With Implementers’ Staff To Identify And Address Obstacles, Delays, And Other Challenges To Cyber-related Initiatives And Projects. integration Of Complementary Programs: • Work With Inl Implementers, U.s. And International Agencies, Ngos, And Nigerian Institutions To Ensure Full Integration Of Parallel And/or Complementary Foreign Assistance Efforts To Improve The Capacity Of The Nigerian Judicial Sector. This Shall Include U.s. Mission Nigeria Offices And Units, Including The Political And Economic Sections, Regional Security Office (rso), Usaid, Department Of Defense, And Other U.s. Agencies, As Well As International Organizations And Donors (e.g., Iom, Unodc, Uk, And The Eu). • Coordinate Activities With These Entities To Avoid Duplication And Repetition And Ensure A Coherent Approach To Criminal Justice Sector Assistance In International Programs. end Use Monitoring: • Ensure That Equipment Purchased With United States Government (usg) Funds Are Effectively Utilized. This Assists In The Prevention Of Fraud, Corruption, Waste, Or Mismanagement Of Equipment. briefing & Reporting: • Prepare, Coordinate, And Ensure The Timely Issuance Of One-time And Periodic Reports On Inl-efforts Related To Increasing The Capacity Of The Nigerian Law Enforcement And Civilian Agencies To Counter And Deter Criminality And Protect Citizens. • Prepare Periodic List Of All Current Nigerian Government Units And Agencies Working To Combat Cybercrime, Including Units Assigned To That Function And Information On Active Numbers, Operations, Training, And Disposition; Prepare Periodic Information On The Number And Type Of Units, The Rates Of Attrition, Desertion, Recruitment, And Other Factors Affecting Unit Effectiveness, Capability, And Operational Integrity. • Provide Information, Details, And Updates That Assist Inl Officers In Their Preparation Of Periodic Reports, Cables, Memoranda, Assessments, Monitoring And Evaluation And Assessment Reports, And Other Documents Related To Efforts To Increase The Capacity Of The Nigerian Criminal Justice Sector. • Participate In And Assist With Official Visits From Usg And Inl Visits, And Aid In Escorting And Arranging Appropriate Itineraries For Official Travelers. • Brief Department, Congressional, Staff Delegations, And Other Selected International Dignitaries On Inl’s Efforts To Increase The Capacity Of Nigeria’s Criminal Justice Sector To Address Cybercrime, Cybersecurity, And Adopt And Implement Relevant International Treaties. • Attend Relevant Embassy Meetings And Security Sector Reform Related Meetings; Brief The Inl Nigeria Program Officer And Appropriate Embassy Members, And Report On Major Issues Related To Inl’s Efforts To Increase The Capacity Of The Nigerian Criminal Justice Sector, Including The Moj, Npf, Efcc, Ncos, And Nscdc. security Of Training Teams And Personnel: • Maintain Points Of Contact With The Moj, Npf, Efcc, Ncos, Nscdc, Other Criminal Justice Agencies, Other Gon Stakeholders, And Local Authorities For Determining The State Of Cybercrime Operations And Training Areas To Assist In The Development Of Investigative, Preventative, And Implementation Plans And Developing Threat Assessments. administrative: • When Required, Perform The Role Of Duty Officer. • Perform Other Duties As Requested And Assigned That Are Directly Related To This Statement Of Work. trainings & Distance Learning Courses 1. Completes The Contracting Officer Representative (pa296) Distance-learning (dl) Course Through The Foreign Service Institute (fsi) Within 120 Days Of Arriving At Post. 2. Completes The Introduction To Working In An Embassy (pn113) Distance-learning (dl) Course Through The Foreign Service Institute (fsi) Within The First Six (6) Months Of Arriving At Post. 3. Completes The Mandatory Foreign Affairs Counter-threat (fact) Course (ct650) Prior To Deployment To Post. 4. Completes The Inl/km-implemented “inl-prep” In-person Training Course Prior To Or Within 90 Days Of Arriving To Post. 5. Completes The Managing Foreign Assistance Awards Overseas (pp223) Distance-learning (dl) Course Through The Foreign Service Institute (fsi) Within The First Six (6) Months Of Arriving At Post. 6. Completes The Foreign Assistance Performance Monitoring And Evaluation (pp425) Distance-learning (dl) Course Through The Foreign Service Institute (fsi) Within First Six (6) Months Of Arriving At Post. 7. Completes The Mitigating Unconscious Bias (pt144) Distance-learning (dl) Course Through The Foreign Service Institute (fsi) Course Within The First 90 Days Of Arriving At Post. 8. Works With The Inl Program Office/post To Determine A Timeline For Completing The Inl Staff Orientation And Readiness Training (soar). 9. Consultations With The Inl Program Officer May Be Required. place Of Performance & Travel Requirements the Place Of Performance For This Position Is The U.s. Embassy Abuja, Nigeria. Frequent Travel In-country And Regionally On A Tdy Basis To Meet Program Needs Is Required. International Travel For Consultations And Conferences May Be Required. relationships the Senior Cybercrime Advisor Reports To The Inl Director At Us Embassy Abuja, Nigeria. The Incumbent Will Work Closely With And Receive Guidance From The Inl/ame Nigeria Program Officer And The Inl Cyber Team In Washington, Dc. The Senior Advisor Maintains Open, Timely, And Professional Communications, Resulting In A Relationship That Proactively Addresses Potential Problems With Flexible, Workable Solutions. the Contract Administrator Shall Be The Inl Contracting Officer In Washington. In No Instance Shall The Inl Director Or Any Other Individual Be Authorized To Alter Or Modify The Terms And Conditions Of The Contract Or Waive The Government's Requirements, Price, Delivery, Or Other Terms And Conditions. The Contracting Officer Must Authorize Such Changes In Writing. the Inl Director Will Provide Yearly Performance Reviews To The Inl/ex/gapp Contracting Officer In Washington, D.c. To Contribute To The Incumbent’s Official Yearly Review. complexity this Position Involves Planning, Organizing, And Completing Financial And Organizational Analysis Of Enormous Complexity. Due To The High Visibility And Political Sensitivity Of The Issues In Which Inl Is Involved, There Is Extreme Difficulty In Identifying The Nature Of The Issues And Planning, Organizing, And Determining The Scope And Depth Of Studies/audits To Be Undertaken. The Psc Is Expected To Address Difficult Scenarios By Separating The Substantive Nature Of The Programs Or Issues Into Their Components And Determining The Nature And Magnitude Of Programs Or Issues, As Well As In Discerning The Intent Of The Legislation And Policy Statements And Determining How To Translate The Intent Into Program Actions. scope & Effectiveness the Psc Performs Broad And Extensive Assignments Related To A Complex Administrative/financial Program Spanning The Full Range Of Citizen Safety, Law Enforcement, Rule Of Law, And Counternarcotics Programs In Nigeria, Which Is Of Significant Interest To The Public And To Congress. period Of Performance the Period Of Performance For This Contract Is Twelve (12) Months From The Date Of Award With Four (4) Optional One-year Extensions. minimum Qualifications 1. U.s. Citizenship With The Ability To Obtain And Maintain Department Of State Secret Level Security Clearance, Medical Clearance, And Ethics Clearance (if Applicable). (security Clearance Upgrade To Top Secret Level May Be Required.) 2. Bachelor’s Degree From An Accredited Institution With A Minimum Of 10 (ten) Years Of Experience Performing Duties Related To This Sow In The Public Or Private Sector. 3. A Minimum Of Three (3) Years Of Professional Experience Working On Cybercrime, Cybersecurity Or Criminal Justice Fields. 4. Demonstrated Knowledge Of Cybercrime Best Practices, Policies, Issues, And U.s. And International Standards. 5. A Minimum Of One (1) Year Of Experience Working Overseas. 6. Demonstrated Experience In Project Management. 7. Demonstrated Working Knowledge Of Ms Word, Outlook, Excel, Teams, And Sharepoint. evaluation Factors (used To Determine The Competitive Ranking Of Qualified Offerors In Comparison To Other Offerors.) Offerors Should Cite Specific, Illustrative Examples For Each Factor. Responses Must Be Limited To 500 Words Per Factor. Any Additional Words Above The Limit Will Neither Be Read Nor Scored. factor 1: Work Experience (25 Points) demonstrated Experience In Cybercrime Investigations, Policy And Project Implementation, Or Experience In Criminal Justice It Application Development, Training, And Implementation. Demonstrated Full Life-cycle Project Management Experience, Including Planning, Implementation, Monitoring And Evaluation, Close-out And Coordinating Activities With Multiple Entities. Experience Working Overseas In Countries Under Difficult Conditions Or In An Embassy Environment Is Preferred. factor 2: Technical Experience (25 Points) demonstrated Experience Assessing Cybercrime Investigative And/or Prosecutorial Capabilities; Demonstrated In-depth Knowledge Of Cybercrime Best Practices, Polices, Issues, And International And U.s. Best Practices And Standards In Combating Cybercrime. Demonstrated Experience In Software Engineering, Design, And Development Of Cybercrime It Applications. Substantive Knowledge Of And Experience Within International Cybercrime And Criminal Financing, Including Cryptocurrencies, Is Preferred. factor 3: Communication & Management Experience (20 Points) demonstrated Ability To Communicate In A Timely And Concise Manner, Both Orally And In Writing. Demonstrated Experience In Briefing Senior Officials, Preparing, And Writing Reports, Audits, And Memoranda. Demonstrated Ability To Interact Effectively With Others At All Command Levels, Including Diverse And Multicultural Groups, To Develop And Maintain Strong Working Relationships. basis Of Rating: Offerors Who Clearly Meet The Education/experience Requirements Will Be Further Evaluated Based On Scoring Of The Evaluation Factor Responses. Offerors Are Required To Address Each Of The Evaluation Factors In A Separate Document Describing Specifically And Accurately What Experience, Training, Education And/or Awards They Have Received That Are Relevant To Each Factor. Failure To Specifically Address The Evaluation Factors May Result In Your Not Receiving Credit For All Of Your Pertinent Experience, Education, Training And/or Awards. the Offeror Rating System Is As Follows: evaluation Factors Have Been Assigned The Following Points: factor #1 – 25 factor #2 – 25 factor #3 – 20 total Possible – 70 Points interview Performance – 30 Points satisfactory Professional Reference Checks – Pass/fail (no Points Assigned) past Performance Evaluation Of Applicant’s Ability To Perform Under The Contract. In Conducting The Evaluation, The U.s. Government Reserves The Right To Utilize All Evaluation Information Available At The Time Of Evaluation, Whether Provided By The Applicant Or Obtained From Other Sources. total Possible Points: 100 the Most Qualified Candidates May Be Interviewed, Required To Provide A Writing Sample, And Demonstrate An Ability To Operate Commonly Used Office Applications. Inl Will Not Pay For Any Expenses Associated With The Interviews. In Addition, Applications (written Materials And Interviews) Will Be Evaluated Based On Content As Well As On The Applicant's Writing, Presentation, And Communication Skills. In The Event That An Applicant Has Fully Demonstrated His/her Qualifications And There Are No Other Competitive Applicants, Inl Reserves The Right To Forego The Interview Process. Professional References Will Be Evaluated For Applicants Being Considered For Selection. compensation (base Pay) this Position Has Been Designated At The Fs-02 Equivalent Level ($101,395 - $148,902 Per Annum). Final Compensation Will Be Negotiated Within The Listed Market Value Based Upon Qualifications, Previous Relevant Experience And Work History, Salary And Educational Background. Salaries, Including Any Recruitment Supplemental Pay That Exceeds The Listed Pay Range, Will Not Be Entertained Or Negotiated. for Award, Inl Will Negotiate For This Contract Based On The Market Value As Outlined Above And Overall Experience Relevant To The Solicitation Requirements. benefits & Allowances as A Matter Of Policy, Inl Normally Authorizes The Following Benefits And Allowances benefits - If Applicable • Employee's Fica/medicare Contribution • Contribution Toward Health And Life Insurance • Pay Comparability Adjustment • Annual Increase • Eligibility For Worker's Compensation • Annual, Sick And Home Leave • 401k Plan • Medvac (provided By Dos Med) allowances In Accordance With Department Of State Standardized Regulations (dssr) - If Applicable • Temporary Quarters Subsistence Allowance (tqsa) Or Per Diem Upon Arrival At Post • Housing Allowance • Post Allowance • Supplemental Post Allowance • Maintenance Allowance (sma) • Education Allowance • Educational Travel (full-time United States Based Secondary) • Post Hardship Differential • Danger Pay • Shipment Of Hhe, Uab, Pov And Consumables

Details: Description Invitation To Bid For Construction Of Solar Powered Irrigation Project, Construction Of Reinforced Concrete Tanks And Installation Of Pipelines For Upper Masaba Sip The National Irrigation Administration – Regional Office Ix Bac, Through The Cy 2025 National Expenditure Program (nep) For General Appropriation Act (gaa) 2025 Fund, Invites Contractors To Submit Bids For The Following Contract: Contract Reference No. : Niar9-epa-sip2025-015 (infra) Project Name : Upper Masaba Sip Contract Location : Quiniput, Zamboanga City Scope Of Works : Construction Of Solar Powered Irrigation Project, Construction Of Reinforced Concrete Tanks And Installation Of Pipelines For Upper Masaba Sip Approved Budget For The Contract (abc) : Php 9,894,609.41 Contract Duration : 168 Calendar Days Amount Of Bidding Documents : Php 10,000.00 The Nia – Ro9 Bac Is Conducting An Early Procurement Activity (epa) On Public Bidding For This Contract In Accordance With Republic Act 9184, Otherwise Known As The “government Procurement Reform Act” And Its Revised Implementing Rules And Regulations (rirr). To Be Eligible To Bid For The Above-stated Contract, A Contractor Must Meet The Following Major Requirements: (a) Filipino Citizen Or 60% Filipino-owned Partnership/corporation; (b) Completion Of A Similar Contract Costing At Least 50% Of The Abc, And (c) Net Financial Contracting Capacity (nfcc) At Least Equal To Abc. Interested Bidders Are Required To Submit Two (2) Valid Ids Of The Authorized Managing Officer/authorized Liaison Officer Indicated In The Submitted Company Profile/crc. Updated Company Profile Shall Also Be Submitted And Presented To The Nia-r9 Bac Secretariat Upon Purchased Of The Bidding Documents. Credit Line Commitment Shall No Longer Be Accepted As An Alternative To The Prospective Bidder’s Computation Of Nfcc Per Gppb Resolution No. 20-2013 Dated July 30, 2013. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion In The Eligibility Check, Preliminary Evaluation Of Bids, Post Qualification, And Award. The Significant Times And Deadlines Of Procurement Activities Are Shown Below: Issuance Of Bidding Documents : December 21, 2024 – January 20, 2025 At 8:30 Am Pre-bid Conference : January 8, 2025 At 9:00 Am Submission Of Bids : January 20, 2025 At 8:30 Am Opening Of Bids : January 20, 2025 At 9:00 Am Interested Bidders May Obtain Further Information From Nia – Ro9 Bac And Inspect The Bidding Documents At The Address Given Below Starting December 21, 2024 – January 20, 2025. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders From The Address Below And Upon Payment Of A Non-refundable Fee For The Bidding Documents Prescribed In The Above-mentioned List Of Projects. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. Only The Authorized Managing Officer/authorized Liaison Officer Indicated In The Submitted Company Profile/crc Shall Be Authorized To Purchase And Submit Bidding Documents. The Use Of Special Power Of Attorney (spa) Is Prohibited As Per Nia Memorandum Circular No.52 Series 2014 Dated December 1, 2014. The Nia – Ro9 Bac Will Hold A Pre-bid Conference On 08 January 2025 At 9:00 Am At Conference Room, National Irrigation Administration – Regional Office Ix, Regional Center, Balintawak, Pagadian City, Which Shall Be Open To All Interested Parties. Bids Must Be Duly Received By The Bac Secretariat Thru Manual Submission At The Office Address As Indicated Below On Or Before 20 January 2025 At 08:30 Am. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Securing Declaration Or Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb. Clause 18.1. Bids Will Be Opened In The Presence Of The Bidder’s Authorized Managing Officer Or Authorized Liaison Officer Of Interested Parties At The Address Below. The Nia – Ro9 Bac Additional Guidelines Is The Conduct Of Site Inspection To Be Scheduled During Pre-bid Conference. • The Certificate Of Site Inspection Shall Be Issued And Signed By The Nia R9 Authorized Representative After The Activity, Which Shall Be Required To Include In The Bid Tender (technical Component). Prospective Bidders Shall Submit Their Sealed Envelopes Together With The Duly Accomplished Forms As Provided In The Bd’s On Or Before The Deadline Of Dropping Of The Bid Documents At The Nia – Ro9 Bac By The Authorized Managing Officer (amo) Or Authorized Liaison Officer Indicated In The Submitted Company Profile/crc Of The Parties. The Liaison Officer Shall Submit A Letter From The Amo Authorizing Her/him To Drop Their Bid, Attend The Bidding Process And Also Submit A Copy Of Company I.d. For Verification. No Special Power Of Attorney (spa) Shall Be Allowed. The Procuring Entity Shall Not Be Held Responsible Of Any And All Bid Documents/proposals Losses. All Interested Contractors/bidders Must Inform The Bac Chairperson Thru Its Secretariat Of Their Documents Submitted In Any Means Provided Above Before The Date Of The Bid Opening To Avoid Late Submission. The Nia – Ro9 Bac Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders, In Accordance With The Provisions Of Section 41 Of Ra 9184 And Its Irr. Pursuant To Nia Memorandum Circular No. 119 S. 2020, Subject: Policy On Utilization Of Videoconferencing, Webcasting Or Similar Technology In The Conduct Of Public Procurement Activities, Procurement Proceedings For The Above Mention Contracts Will Be Held Through Face-to-face Meeting In Combination With Video Conferencing Using Google Meet Thru The Links: Pre-bidding Conference : Https://meet.google.com/hev-uxfp-utg Opening Of Bids : Https://meet.google.com/bkn-midq-rvv 5.2 For This Purpose, Contracts Similar To The Project Refer To Contracts Which Have The Same Major Categories Of Work, Which Shall Be: Completed For The Past Five (5) Years. • Irrigation And Flood Control With Experience In Solar Powered Pumps To Be Eligible To Bid For The Contract, Bidders Must Have Done A Single Largest Completed Contract (slcc) Containing A Category Of Work Which Is The Same As Or Similar To The Major Category Of Works, And Who’s Total Slcc Cost Is At Least 50% Of The Approved Budget For The Contract (abc) To Be Bid. The Above Slcc Must Be Supported By A Copy Of The Contract, Certificate Of Completion, And Owner’s Certificate Of Final Acceptance (1-year After The Issuance Of The Certificate Of Completion) Issued By The Project Owner Other Than The Contractor Or A Final Rating Of At Least Satisfactory In The Constructors Performance Evaluation System (cpes). In Case Of Contracts With The Private Sector, An Equivalent Document Shall Be Submitted. 10.3 A Valid Pcab License Is Required, And In Case Of Joint Ventures, A Valid Special Pcab License, And Registration For The Type And Cost Of The Contract For This Project. Interested Bidders Shall Have At Least Or Any Equivalent To Pcab Size Range “small B” Category: C & D (per Pcab Board Resolution No. 201, Series Of 2017) 10.4 The Key Personnel Must Meet The Required Minimum Years Of Experience Set Below: Key Personnel Relevant Experience General Experience Number Project Engineer 5 Years Licensed Civil Engineer. Shall Render Full-time Service To The Project Until Completion. 5 Years 1 Office Engineer 3 Years Licensed Civil Engineer. Shall Render Full-time Service To The Project Until Completion. 3 Years 1 Materials Engineer 1 3 Years Shall Be An Accredited Material Engineer Of Dpwh. Shall Render Service To The Project As Required. 3 Years 1 Foreman 5 Years Experienced In Irrigation Structures. Shall Render Fulltime Service To The Project Until Completion. 5 Years 1 Safety & Health Officer (so2) 3 Years Shall Have At Least 3 Years’ Experience In Construction Industry. Completed Cosh Training And Shall Render Fulltime Service To The Project Until Completion. 3 Years 1 Geodetic Engineer 3 Years Licensed Geodetic Engineer. Shall Render Service To The Project As Required. 3 Years 1 Electrical Engineer 3 Years A Licensed Electrical Engineer With Experience In Solar Powered Irrigation Projects. Shall Render Service To The Project As Required. 3 Years 1 Mechanical Engineer 3 Years A Licensed Mechanical Engineer With Experience In Solar Powered Irrigation Projects. Shall Render Service To The Project As Required. 3 Years 1 The Contractor May Assign Other Support Personnel From Those Listed For The Optimal Performance Of The Project Construction Team. The Support Personnel Shall Undertake The Required Day-to-day Site Or Office-related Activities Of The Contractor. Full Time Services Mean, The Personnel Involved Shall Render Minimum Of Eight (8) Hours A Day Or Forty (40) Hour A Week And Shall Be Available Upon Request Of The Procuring Entity. 10.5 The Minimum Major Equipment Requirements Are The Following: Equipment Capacity No. Of Units Crawler Type Drilling Rig (rotary Or Hydraulic Driven) 100m 1 Generator Set 15kva 1 Welding Machine 300a 1 Dumptruck 6 Cu.m 1 Concrete Mixer 1 – Bagger 1 Butt Fusion Machine Up To 6” Diameter 1 Survey Instrument 1 Set Initial Equipment Requirement Upon Mobilization: Equipment Capacity No. Of Units Crawler Type Drilling Rig (rotary Or Hydraulic Driven) 100m 1 Dumptruck 6 Cu.m 1 Survey Instrument 1 Set The Proof Of Ownership Of Equipment Requirements Are Copies Of Current Lto Official Receipt (or) And Certificate Of Registration (cr) Of The Equipment Which Should Be Attached Together With The Affidavit Of Ownership. In Case Of Leased Equipment, A Lease Contract And Affidavit Of Commitment Or Certificate Of Availability Of Equipment Should Be Submitted With The Lessor/owner As The Pledger Of The Equipment, Stating Therein That The Equipment Will Be Available For The Whole Duration Of The Project. For Purchase Agreement, The Description Of The Equipment To Be Purchased Such As Brand/model, Type Of Equipment, Motor No., Body No. And The Capacity Must Be Indicated In The Document, Otherwise, The Bac Will Not Honor The Purchase Agreement And The Bidder Will Be Declared As Non-complying. Likewise, List Of Contractor’s Major Equipment Units Pledged To Be Used For The Project Must Be Supported By Proof Of Ownership If It Is Owned, Lease Agreement If It Is Being Leased And Purchase Agreement If To Be Purchased. A Certification Of Availability Of Equipment For The Duration Of The Project Must Also Be Provided By The Equipment Owner And/or Lessor/vendor. The Bidder Should Also Specify In The Submitted Bid The Location Of The Equipment Where It Can Be Inspected. If Any Piece Of Equipment Is Not In The Specified Location, Then The Bidder Shall Be Post-disqualified. Item No. Description Qty Unit I Temporary Works & Mobilization/demobilization Mobilization/demobilization 1.00 Ls Temporary Facilities 1.00 Ls Project Billboard 1.00 Ls Ii Construction Safety & Health 1.00 Ls Iii Construction Of Solar Pump Irrigation System Well Drilling, Development And Testing W/ 6" Casing (until Good Aquifer Is Reached.) 1.00 Lot Solar Module Mounting Structure 1.00 Lot Solar Power Controller Housing (4x2 Meters) 1.00 Lot Perimeter Fence 1.00 Lot Delivery And Installation Of Lightning Arrester 1.00 Lot Pv Modules-solar Panels 600 Watts (please See Attached Plans.) 1.00 Lot 5hp Hybrid Ac/dc Submersible Water Pump Power: 5.5hp/4000w Voltage (ac): 85v-280v Voltage (dc): 80v-550v Max. Flow: 19m³/h Max. Head: 135m Outlet: 2" Body Diameter: 3 3/4" 1.00 Lot Hybrid Dc/ac Controller (11kw) 1.00 Lot Delivery & Installattion Of Cabling & Accessories For Solar Pump System 1.00 Lot Cctv Security System 1.00 Lot Construction Of Reinforced Concrete Tank Common Excavation (manual) 91.14 Cu.m 3000 Psi Concrete 66.87 Cu.m Rsb (cutting, Bending & Placing Of Rebars) 5,969.76 Kg Rc Tank Accessories (gate Valve, Pipes, Etc) 3.00 Ls Common Backfill (manual) 118.47 Cu.m Installation Of Water Distribution Pipe W/ Appurtenant Structures Common Excavation (manual) 266.64 Cu.m 4" Ø Hdpe Pipe Sdr 11 (w/ Free Delivery, Connectors& Fittings) 590.00 Ln.m 3" Ø Hdpe Pipe Sdr 11 (w/ Free Delivery, Connectors& Fittings) 570.00 Ln.m Air Release Valve Installation With Accessories 3.00 Ls Water Top Stand 4.00 Set Common Backfill (manual) 134.23 Cu.m

Details: This Is A Combined Synopsis/solicitation For Commercial Products Prepared In Accordance With The Format In Federal Acquisition Regulation (far) Subpart 12.6, Streamlined Procedures For Evaluation And Solicitation For Commercial Products, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Quotes Are Being Requested, And A Written Solicitation Document Will Not Be Issued. this Is A Brand Name Or Equal To Request For Quote (rfq), And The Solicitation Number Is 36c26025q0188. The Government Anticipates Awarding A Firm-fixed Price Supply Order From This Solicitation. this Is A Solicitation For Centrella Beds With Accessories. The Solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular (fac) 2025-02 Effective January 03, 2025. this Solicitation Is 100% Set-aside For Small Business. The Associated North American Industrial Classification System (naics) Code For This Procurement Is 339113, With A Small Business Size Standard Of 800 Employees, And The Psc Is 6530. all Interested Companies Shall Provide Quotations That Are Brand Name Or Equal To Hillrom Centrella For The Following: equipment Needed: items: Brand Name Or Equal To Hillrom Centrella item # description/part Number* qty Price Extended Amount 1 centrella Bed With Pro Surface cnt 255 3 2 centrella Smart+ Bed With Max Air Surface And Blower cnt 355 8 3 bed Base cnt Base 11 4 nurse Call In Siderail 11 5 accessory Outlet 11 6 patient Helper Bracket 11 7 osi Patient Helper Sleeve 11 8 pro Surface For 36 Inch Frame 3 9 safeview With Illumiguide 3 10 second Lcd Touchscreen 3 â  Subtotal (products) â  salient Characteristics max Air Feature Must Have Powered Air Mattress That Operates Continuously To Decrease Localized Heat And Moisture Buildup. Allows For Continuous Full-body Pressure Redistribution For Patients 70 To 500 Pounds, Automatically Adjusts The Air System To Accommodate Changes Weight Distribution. ability To Override And Increase Firmness For Patient Transfers Or Adjust Patient Position. ability To Adjust For Patient Comfort, With 2 Zones, Which Can Be Adjusted Separately. gci Touchscreen Must Be Located On The Outside Of The Head Rails For Quick Caregiver Access To Patient And Bed Status As Well As Other Bed Controls. Approximate Size 4x5 Inches must Include Bed Exit Silence Alarm Exit Alarm Settings To Include Silence, Auto Reset, And Visual And Audible Safety Prompts. brake Not Set Alarm Must Have Option For Spoken Verbal Safety Alert To Caution Caregiver And Patient In A Non-alarming Manner. one Button Chair One Button Control To Convert A Flatbed Into A Cardiac Chair. must Include Battery Backup - 12 Volt, 7 Mil Amp Hour Batteries X 2 digital Angle Indicator Digital Angle Indicator Gives The Specific Reading Of The Angle Of Bed If Trendelenburg Or Reverse Trendelenburg Positioning Is Needed. Must Reach 18 Degrees. must Have Built In Line And Cord Management - Cutouts For Electrical Cord Or Monitor Cable Management For Use During Transporting. Must Be Located Within The Head And Footboards Or Alternative Built-in To The Bed, Not Hanging. must Have 4 Iv Pole Sockets - Sized For Standard Hospital Iv Poles. 2-4 Bag Capacity. must Include Integrated Restraint Holders - Sized For Standard Belt Restraints. must Have Lockout Controls Ability To Lock Controls. must Have Drainage Bag Holder Ability To Hold Up To 20 Pounds. must Have Smart Bed Ready (sidecom Req) - Up To 32 Patients Safety And Bed Matrices To Be Transmitted To Caregiver Devices (such As Smart Phones, Vocera, Etc) And/or Vista Or Cerner Emr must Have Wi-fi Module must Have Enhanced 3-mode Bed Exit - Includes Silence, Auto Reset And Visual And Audible Safety Prompts. must Have Motion Activated Nightlight must Include Stand Assist - Height Adjust Buttons To Aid In Safely Lifting The Patient Onto Their Feet advanced Slideguardâ® Feature - Reduces Patient Migration In Bed When The Head Of The Bed Is Raised must Include Foley Position Limit - Monitors And Alerts If A Foley Bag Is Touching The Floor patient Hob Angle Display - Digital Head Of Bed Angle Indicator Gives The Specific Reading Of The Angle Of The Head trend/rev Trendelenburg Ranges From 0-18 Degrees. 18 Degrees Required. dampened Emergency Cpr - Ability To Quickly And Safely Lower The Head Section To A Flat Position In Case Of A Code. Ability To Access From Both Sides Of The Bed. must Have Patient Storage In Siderail - Sized To Hold Items Such As Smart Phone, Reading Glasses, Books/magazines. must Have Integrated Urinal Holders Ability To Hold Any Sized Urine Collection Bottle That Is Filled. flexafoot Powered Bed Extend Must Have Powered Bed Length Extension. must Have Steer Caster Font Left Caster Can Be Locked For Steering 36 Inch Frame Width Required in-bed Scale Must Have Ability To Weight Up To 500 Pounds usb Charger Required 2nd Lcd Touchscreen Required patient Pendant - Moveable Bed Control That Allows The Patient Easy Access To Adjust The Bed S Head And Foot Sections. Approx. Size Is 3 X 5 . removable Iv Pole must Have Verbal Alerts Verbal Safety Alerts Such As Brake Not Set, Your Care Team Has Been Called, Please Don T Get Up, Etc. Able To Set 6 Different Languages. additional Information Sought: warranty Please Describe The Offered Warranty. place Of Manufacture Please Provide The Place Of Manufacture. 52.211-6â brand Name Or Equal. as Prescribed Inâ 11.107(a), Insert The Following Provision: brand Name Or Equalâ (aug 1999) (a)â if An Item In Thisâ solicitationâ is Identified As "brand Name Or Equal," The Purchase Description Reflects The Characteristics And Level Of Quality That Will Satisfy The Government S Needs. The Salient Physical, Functional, Or Performance Characteristics That "equal"â productsâ mustâ meet Are Specified In Theâ solicitation. (b)â to Be Considered For Award,â offersâ of "equal"â products, Including "equal"â productsâ of The Brand Name Manufacturer,â must- (1)â meet The Salient Physical, Functional, Or Performance Characteristic Specified In Thisâ solicitation; (2)â clearly Identify The Item By- (i)â brand Name, If Any; And (ii)â make Or Model Number; (3)â includeâ descriptive Literatureâ such As Illustrations, Drawings, Or A Clear Reference To Previously Furnished Descriptive Data Or Information Available To Theâ contracting Officer; And (4)â clearly Describe Any Modifications Theâ offerorâ plans To Make In A Product To Make It Conform To Theâ solicitationâ requirements. Mark Any Descriptive Material To Clearly Show The Modifications. (c)â theâ contracting Officerâ will Evaluate "equal"â productsâ on The Basis Of Information Furnished By Theâ offerorâ or Identified In Theâ offerâ and Reasonably Available To Theâ contracting Officer. Theâ contracting Officerâ is Not Responsible For Locating Or Obtaining Any Information Not Identified In Theâ offer. (d)â unless Theâ offerorâ clearly Indicates In Itsâ offerâ that The Product Being Offered Is An "equal" Product, Theâ offerorâ shallâ provide The Brand Name Product Referenced In Theâ solicitation. (end Of Provision) delivery Fob Destination Is Preferred, 30 Days After Receipt Of Order. All Deliveries Will Be Coordinated With The Portland Va Medical Center Point Of Contact. place Of Delivery: department Of Veterans Affairs portland Va Medical Center community Living Center 1601 E 4th Plain Blvd vancouver, Wa 98661 the Full Text Of Far Provisions Or Clauses May Be Accessed Electronically At Http://acquisition.gov/comp/far/index.html http://www.va.gov/oal/library/vaar/index.asp the Following Solicitation Provisions Apply To This Acquisition: far 52.212-1, Instructions To Offerors Commercial Products addendum To Far 52.212-1 Instructions To Offerors Commercial 52.204-7 system For Award Management (oct 2018) 52.204-16 commercial And Government Entity Code Reporting (aug 2020) 52.204-20 predecessor Of Offeror (aug 2020) 52.204-24 representation Regarding Certain Telecommunications And Video Surveillance Services Or Equipment (nov 2021) 52.211-6 brand Name Or Equal (aug 1999) 52.212-3 offeror Representations And Certifications-commercial Products And Commercial Services (may 2024) 52.222-50 combatting Trafficking In Persons (nov 2021) 52.225-3 buy American-free Trade Agreements-israeli Trade Act (nov 2023) 52.225-18 place Of Manufacture (aug 2018) 52.252-1 provisions Incorporated By Reference (feb 1998) vaar Provisions: 852.239-75 information And Communication Technology Accessibility Notice (feb 2023) (a) Gray Market Items Are Original Equipment Manufacturers (oem) Goods Sold Through Unauthorized Channels In Direct Competition With Authorized Distributors. This Procurement Is For New Oem Medical Supplies, Medical Equipment And/or Services Contracts For Maintenance Of Medical Equipment (i.e., Replacement Parts) For Va Medical Centers. No Remanufactures Or Gray Market Items Will Be Acceptable. (b) Offeror Shall Be An Oem, Authorized Dealer, Authorized Distributor Or Authorized Reseller For The Proposed Medical Supplies, Medical Equipment And/or Services Contracts For Maintenance Of Medical Equipment (i.e., Replacement Parts), Verified By An Authorization Letter Or Other Documents From The Oem, Such That The Oem S Warranty And Service Are Provided And Maintained By The Oem. All Software Licensing, Warranty And Service Associated With The Medical Supplies, Medical Equipment And/or Services Contracts For Maintenance Of Medical Equipment Shall Be In Accordance With The Oem Terms And Conditions. (c) The Delivery Of Gray Market Items To The Va In The Fulfillment Of An Order/award Constitutes A Breach Of Contract. Accordingly, The Va Reserves The Right Enforce Any Of Its Contractual Remedies. This Includes Termination Of The Contract Or, Solely At The Va S Election, Allowing The Vendor To Replace, At No Cost To The Government, Any Remanufactured Or Gray Market Item(s) Delivered To A Va Medical Facility Upon Discovery Of Such Items. (d) Any Award Made As A Result Of This Solicitation Will Be Made On An All Or Nothing Basis. (e) Offerors Are Warned Against Contacting Any Va Personnel Other Than The Contracting Officer And Contract Specialist Prior To Placement Of Any Award Made Resulting From This Rfq. If Such Contact Occurs And Found To Be Prejudicial To Competing Contractors, The Offeror Making Such Contact May Be Excluded From Award Considerations. (f) All Proprietary Information Shall Be Clearly And Properly Marked. If The Offeror Submits Annexes, Documentation, Attachments, Or The Like, Not Specifically Required By This Solicitation, Such Will Count Against The Offeror S Page Limitations Unless Otherwise Indicated In The Specific Volume Instructions Below. (g) All Information Shall Be Confined To The Appropriate File. The Offeror Shall Confine Submissions To Essential Matters, Sufficient To Define The Quote And Provide An Adequate Basis For Evaluation. Offerors Are Responsible For Including Sufficient Details, In A Concise Manner, To Permit A Complete And Accurate Evaluation Of Each Quote. (end Of Addendum To 52.212-1) far 52.212-2, Evaluation-commercial Items : The Government May Award A Contract Resulting From This Solicitation To The Responsible Offeror Whose Offer Conforming To The Solicitation Will Be Most Advantageous To The Government, Price And Other Factors Considered. In Accordance With Far 9.104-2, The Special Standards Of Responsibility Described Below Apply To This Procurement. Offerors Who Fail To Meet Any Special Standards Of Responsibility Will Not Be Eligible To Receive Contract Award. The Following Factors Shall Be Used To Evaluate Offers: special Standards Of Responsibility: (per Far 9.104-2) The Following Special Standards Of Responsibility Apply To This Procurement: sp1: Offeror Must Be A Manufacturer Authorized Provider For The Items Provided. A Letter From The Manufacturer Stating Such Must Be Included With Any Response To This Solicitation. price (a) A Written Notice Of Award Or Acceptance Of An Offer, Mailed Or Otherwise Furnished To The Successful Offeror Within The Time For Acceptance Specified In The Offer, Shall Result In A Binding Contract Without Further Action By Either Party. Before The Offeror's Specified Expiration Time, The Government May Accept An Offer (or Part Of An Offer), Whether Or Not There Are Negotiations After Its Receipt, Unless A Written Notice Of Withdrawal Is Received Before Award. far 52.213-3 Offerors Are Advised To Include A Completed Copy Of The Provision At 52.212-3, Offeror Representations And Certifications -- Commercial Items, With Its Offer If Has Not Been Completed On Sam.gov. Offerors Must Complete Annual Representations And Certifications Electronically Via The System For Award Management (sam) Website Located At Https://www.sam.gov/portal In Accordance With Far 52.212-3, Offerors Representations And Certifications Commercial Items. If Paragraph (j) Of The Provision Is Applicable, A Written Submission Is Required. all Service-disabled Veteran Owned Businesses Or Veteran Owned Businesses Must Be Registered/certified With The U.s Small Business Administration At Veteran Small Business Certification Veteran Small Business Certification (sba.gov). the Following Contract Clauses Apply To This Acquisition: far 52.212-4, Contract Terms And Conditions Commercial Products (oct 2018) addendum To Far 52.212-4 The Following Clauses Are Included As A Part Of The Addendum: http://www.acquisition.gov/far/index.html (far) http://www.va.gov/oal/library/vaar/index.asp (vaar) 52.204-13 system For Award Management Maintenance (oct 2018) 52.204-18 commercial And Government Entity Code Maintenance (aug 2020) 52.225-4 buy American-free Trade Agreements-israeli Trade Act Certificate (nov 2023) 52.232-40 providing Accelerated Payments To Small Business Subcontractors (dec 2013) 52.252-2 clauses Incorporated By Reference (feb 1998) vaar Clauses: 852.203-70 commercial Advertising (may 2018) 852.212-71 gray Market Items (nov 2018) 852.232-72 electronic Submission Of Payment Requests (nov 2018) 852.239-76 information And Communication Technology Accessibility (feb 2023) 852.242-71 administrative Contracting Officer (oct 2020) 852.246-71 rejected Goods (oct 2018) 852.247-71 delivery Location (oct 2018) 852.247-73 packing For Domestic Shipment (oct 2018) far 52.212-5, Contract Terms And Conditions Required To Implement Statutes Or Executive Orders Commercial Products (may 2024) (a) The Contractor Shall Comply With The Following Federal Acquisition Regulation (far) Clauses, Which Are Incorporated In This Contract By Reference, To Implement Provisions Of Law Or Executive Orders Applicable To Acquisitions Of Commercial Products And Commercial Services: (1) 52.203-19, Prohibition On Requiring Certain Internal Confidentiality Agreements Or Statements (jan 2017) (section 743 Of Division E. Title Vii, Of The Consolidated And Further Continuing Appropriations Act, 2015 (pub. L. 113-235) And Its Successor Provisions In Subsequent Appropriations Acts (and As Extended In Continuing Resolutions)). (2) 52.204-23, Prohibition On Contracting For Hardware, Software, And Services Developed Or Provided By Kapersky Lab Covered Entities (dec 2023) (section 1634 Of Pub. L. 115-91). (3) 52.204-25, Prohibition On Contracting For Certain Telecommunications And Video Surveillance Services Or Equipment (nov 2021) Section 889(a)(1)(a) Of Pub. L. 115-232). (4) 52.209-10, Prohibition On Contracting With Inverted Domestic Corporations (nov 2015). (5) 52.232-40, Providing Accelerated Payments To Small Business Subcontractors (mar 2023) (31 U.s.c. 3903 And 10 U.s.c. 3801). (6) 52.233-3, Protest After Award (aug 1996) (31 U.s.c. 3553). (7) 52.233-4, Applicable Law For Breach Of Contract Claim (oct 2004) (public Laws 108-77 And 108-78) (19 U.s.c. 3805 Note)). the Following Subparagraphs Of Far 52.212-5 Are Applicable And Incorporated By Reference: 52.203-17 52.204-10 52.204-27 contractor Employee Whistleblower Rights (nov 2023) reporting Executive Compensation & First-tier Subcontract Awards (jun 2020) (pub. L. 109-282) (31 U.s.c. 6101 Note) prohibition On A Bytedance Covered Application (jun 2023) (section 102 Of Division R Of Pub. L. 117-328) 52.209-6 protecting The Government S Interest When Subcontracting With Contractors Debarred, Suspended, Or Proposed For Debarment (nov 2021) (31 U.s.c. 6101 Note) 52.219-6 52.219-28 notice Of Total Small Business Set-aside (noiv 2020) post Award Small Business Program Representation (feb 2024) (15 U.s.c 632(a)(2)) 52.222-3 52.222-19 convict Labor (jun 2003) (e.o. 11755) child Labor Cooperation With Authorities And Remedies (feb 2024) (e.o. 13126) 52.222-21 prohibition Of Segregated Facilities (apr 2015) 52.222-26 52.222-35 equal Opportunity (sep 2016) (e.o. 11246) equal Opportunity For Veterans (jun 2020) 52.222-36 52.222-37 equal Opportunity For Workers With Disabilities (jun 2020) (29 U.s.c. 793) employment Reports On Veterans (jun 2020) 52.222-50 combating Trafficking In Persons (nov 2021) (22 U.s.c. Chapter 78 And E.o. 13627) 52.225-3 buy American-free Trade Agreements-isreali Trade Act (nov 2023) 52.225-13 restrictions On Certain Foreign Purchases (feb 2021) (e.o.'s, Proclamations, And Statutes Administered By The Office Of Foreign Assets Control Of The Department Of The Treasury) 52.226-8 52.232-33 encouraging Contractor Policies To Ban Text Messaging While Driving (may 2024) payment By Electronic Funds Transfer System For Award Management (oct 2018) (31 U.s.c. 3332) all Quoters Shall Submit According To The Following: quotes Must Be Emailed To Maureen.sundstrom@va.gov And Received No Later Than 3:00 Pm Pst On 01/21/2025. Quotes May Be Submitted On This Document Or The Vendor S Own Form And Must Include The Completed Buy American Certificate 52.225-4 Available Below, And, If Not The Manufacturer, An Authorized Distributor Letter. Any Offer That Does Not Provide The Following Supporting Documentation May Be Considered Non-responsive. Required Supporting Documentation And Information: buy American Certificate authorized Distributor Letter If Not The Manufacturer certification That Equipment Meets/exceeds The Salient Characteristics Of The Desired Brand Above delivery Date the Government Intends To Make Award Without Discussions. for Information Regarding The Solicitation, Please Contact Maureen Sundstrom At Maureen.sundstrom@va.gov. a.1 52.225-4 Buy American-free Trade Agreements-israeli Trade Act Certificate (nov 2023) (a)â (1)â theâ offerorâ certifies That Eachâ end Product, Except Those Listed In Paragraph (b) Or (c)(1) Of This Provision, Is A Domesticâ end Productâ and That Each Domesticâ end Productâ listed In Paragraph (c)(2) Of This Provision Contains A Criticalâ component. (2)â the Terms "bahraini, Moroccan, Omani, Panamanian, Or Peruvianâ end Product," "commercially Available Off-the-shelf (cots) Item," "criticalâ component," "domesticâ end Product," "end Product," "foreignâ end Product," "free Trade Agreement Country," "free Trade Agreement Countryâ end Product," "israeliâ end Product," And "united States" Are Defined In The Clause Of Thisâ solicitationâ entitled "buy American-free Trade Agreements-israeli Trade Act." (b)â theâ offerorâ certifies That The Followingâ suppliesâ are Free Trade Agreement Countryâ end Productsâ (other Than Bahraini, Moroccan, Omani, Panamanian, Or Peruvianâ end Products) Or Israeliâ end Productsâ as Defined In The Clause Of Thisâ solicitationâ entitled "buy American-free Trade Agreements-israeli Trade Act": free Trade Agreement Countryâ end Productsâ (other Than Bahraini, Moroccan, Omani, Panamanian, Or Peruvianâ end Products) Or Israeliâ end Products: line Item No. country Of Origin [list As Necessary] (c)â (1)â theâ offerorâ shallâ list Thoseâ suppliesâ that Are Foreignâ end Productsâ (other Than Those Listed In Paragraph (b) Of This Provision) As Defined In The Clause Of Thisâ solicitationâ entitled "buy American-free Trade Agreements-israeli Trade Act." Theâ offerorâ shallâ list As Other Foreignâ end Productsâ those Endâ productsâ manufactured In Theâ united Statesâ that Do Not Qualify As Domesticâ end Products. For Those Foreignâ end Productsâ that Do Not Consist Wholly Or Predominantly Of Iron Or Steel Or A Combination Of Both, Theâ offerorâ shallâ also Indicate Whether These Foreignâ end Productsâ exceed 55 Percent Domestic Content, Except For Those That Are Cots Items. If The Percentage Of The Domestic Content Is Unknown, Select No .â other Foreignâ end Products: line Item No. country Of Origin exceeds 55% Domestic Content (yes/no) [list As Necessary] (2)â theâ offerorâ shallâ list Theâ line Item Numbersâ of Domesticâ end Productsâ that Contain A Criticalâ componentâ (see Farâ 25.105). line Itemâ no.â ___ [list As Necessary] (d)â the Government Will Evaluateâ offersâ in Accordance With The Policies And Procedures Ofâ partâ  25â of The Federalâ acquisitionâ regulation. (end Of Provision) mandatoryelectronicinvoicing va Published The Final Rule Requiring Vendors To Submit Invoices Electronically To The Financial Services Center (fsc) In The November 27, 2012 Federal Register. The Rule Became Effective December 27, 2012. The Rule Includes A New Contract Clause To Be Inserted In All Solicitations And Contracts By The Contracting Officer (vaar 852.232-72). Vendors Can Comply With The Rule By Using Either Of The Two Methods Below: facsimile, E-mail, And Scanned Documents Are Not Acceptable Forms Of Submission For Payment Requests. Electronic Form Means An Automated System Transmitting Information Electronically According To The Accepted Electronic Data Transmission Methods Below: va S Electronic Invoice Presentment And Payment System The Fsc Uses A Third-party Contractor, Tungsten, To Transition Vendors From Paper To Electron Icinvoice Submission. Please Go To This Website:http://www.tungsten-network.com/us/en/veterans-affairs/ To Begin Submitting Electronic Invoices, Free Of Charge. a System That Conforms To The X12 Electronic Data Interchange (edi) Formats Established By The Accredited Standards Center (asc) Chartered By The American National Standards Institute (ansi). The X12 Edi Web Site (http://www.x12.org). vendor E-invoice Set-up Information: please Contact Tungsten At The Phone Number Or Email Address Listed Below To Begin Submitting Your Electronic Invoices To The Va Financial Services Center For Payment Processing, Free Of Charge. If You Have Question About The E-invoicing Program Or Tungsten, Please Contact The Fsc At The Phone Number Or Email Address Listed Below: tungsten E-invoice Set Up Information:1-877-489-6135 tungsten E-invoice Email:va.registration@tungsten-network.com fsc E-invoice Contact Information:1-877-353-9791 fsc E-invoice Email:vafsccshd@va.gov

Description: Contact Information|4|n743.43|wwv|717-605-3992|noelle.m.smith10.civ@us.navy.mil| item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| higher-level Contract Quality Requirement (navicp Review Feb 1991)(feb 1999)|1|see Specifications Section C & Section E| inspection Of Supplies--fixed-price (aug 1996)|2||| inspection And Acceptance - Short Version (jun 2002)|8|x||x|||||| general Information-fob-destination|1|a| wide Area Workflow Payment Instructions (jan 2023)|16|invoice And Receiving Report (combo)||tbd|n00104|tbd|tbd|n50286|tbd|||n/a|||||| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|| equal Opportunity (sep 2016)|2||| warranty Of Supplies Of A Noncomplex Nature (june 2003)|6|one Year|365 Days After The Last Delivery Under This Contract||||| warranty Of Data--basic (mar 2014)|2||| buy American --free Trade Agreements--balance Of Payments Program - Basic (jan2023))|3|||| notice Of Total Small Business Set-aside (oct 2020)(deviation 2020-o0008)|1|| alternate A, Annual Representations And Certifications (nov 2020)|13|||||||||||||| buy American-free Trade Agreements-balance Of Payments Program Certificate-basic (dec 2022))|3|||| buy American-balance Of Payments Program Certificate-basic (nov 2014)|1|| annual Representations And Certifications (mar 2023)|13|334513|500|||||||||||| notice Of Priority Rating For National Defense, Emergency Perpardeness, And Enrgy Progam Use (april 2008))|2||x| the Small Business Set Aside Is Dissolved. the Hour And Date Specified For Receipt Of Offers Has Been Extended To 4:30pm Est On 8 January 2025. the Hour And Date Specified For Receipt Of Offers Has Been Extended To 4:30pm Est On 06 March 2024 1.dd1423 Data Item A001 (inspection And Test Plan) May Be Waived If Already On File At Navsup Wss Mechanicsburg. 2. All Contractual Documents (i.e. Contracts, Purchase Orders, Task Orders,delivery Orders, And Modifications) Related To The Instant Procurement Areconsidered To Be "issued" By The Government When Copies Are Either Deposited Inthe Mail, Transmitted By Facsimile, Or Sent By Other Electronic Commercemethods, Such As Email. The Government's Acceptance Of The Contractor'sproposal Constitutes Bilateral Agreement To "issue" Contractual Documents Asdetailed Here In. 3.the Following Proposed Delivery Schedule Applies: submission Of All Certification Data Cdrls 20 Days Prior To Delivery. pnsy Review/acceptance Of Certification Cdrls 6 Working Days After Receipt final Delivery Of Material (186 Days) \ 1. Scope 1.1 The Material Covered In This Contract/purchase Order Will Be Used In A Crucial Shipboard System. The Use Of Incorrect Or Defective Material Would Create A High Probability Of Failure Resulting In Serious Personnel Injury, Loss Of Life, Loss Of Vital shipboard Systems, Or Loss Of The Ship Itself. Therefore, The Material Has Been Designated As Special Emphasis Material (level I, Scope Of Certification, Or Quality Assured) And Special Control Procedures Are Invoked To Ensure Receipt Of Correct Material. 1.1.1 Dssp Scope Of Certification Material - Material Control Division ;(b); Applies To This Material. 2. Applicable Documents 2.1 Order Of Precedence - In The Event Of A Conflict Between The Text Of This Contract/purchase Order And The References And/or Drawings Cited Herein, The Text Of This Contract/purchase Order Must Take Precedence. Nothing In This Contract/purchase Order, however, Must Supersede Applicable Laws And Regulations Unless A Specific Exemption Has Been Obtained. 2.2 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.2.1 Specification Revisions - The Specification Revisions Listed Under "documents References" Below Are The Preferred Revision. Older And/or Newer R Evisions Are Acceptable When Listed Within Contract Support Library Reference Number Csd155 In Ecds (electric contractor Data Submission) At: Ht Tps://register.nslc.navy.mil/. This Is To Allow Contractors To Use Certain Acceptable Older Specification Revisions To Purge Their Existing Stock Of Material Certified To Those Older Revisions Or To Use Newer Specification revisions When Material Is Certified To Newly Released Revisions,without Requiring The Submittal Of Waiver/deviation Requests For Each Specification Revision On Every Contract. Revisions Of Specifications Reflecting Editorial And/or Re-approval (e.g. E2009, r2014, Etc.) Are Considered Inconsequential, But Are Acceptable When Their Revisions Are Listedwithin Csd155 Or Elsewhere Within This Contract. 2.2.2 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. document Ref Data=ansi/asq Z1.4 | | | |080101|a| | | document Ref Data=mil-std-792 | | |f |060519|a| | | document Ref Data=mil-std-1330 | | |e |220516|a| | | document Ref Data=iso_9001 | | | |081115|a| | | document Ref Data=iso10012 | | | |030415|a| | | document Ref Data=iso/iec 17025 | | | |050515|a| | | document Ref Data=mil-p-24212 | | |c |980421|a| 2| | document Ref Data=qpl 24212 | | |32 |060308|a| | | document Ref Data=mil-i-45208 | | |a |810724|a|1 | | document Ref Data=mil-std-45662 | | |a |880801|a| | | document Ref Data=ansi/ncsl Z540.3 | | | |130326|a| | | 3. Requirements 3.1 ;the Transducer, Motional Must Be Manufactured In Accordance With Specification Mil-p-24212, Type Designation Pgt-gp-4500-g-4, Except As Amplified Or Modified Herein.; 3.1.1 ;each Transducer Must Be Furnished With A Receptacle Having Type Normal Keying In Accordance With Ms3102r14s-5p Vice Ms3102r14s-5px Specified By Mil-p-24212c Section 3.5.14.2.; 3.1.2 ;each Transducer Must Be Furnished With A Protective Plug In Lieu Of Mating Plug Specified By Mil-p-24212c Sections 3.5.14 And 3.5.14.2.; 3.2 Oxygen Cleaning - This Material Must Be Cleaned, Tested, Packaged & Labeled By Trained Personnel And Procedures In Accordance With Mil-std-1330, General. 3.3 Mercury Free - Mercury And Mercury Containing Compounds Must Not Be Intentionally Added Or Come In Direct Contact With Hardware Or Supplies Furnished Under This Contract. Mercury Contamination Of The Material Will Be Cause For Rejection. 3.4 Configuration Control - The Contractor Must Maintain The Total Equipment Baseline Configuration. For Items Of Proprietary Design, Contractor Drawings Showing The Latest Assembly Configuration Must Be Provided To The Government In Electronic (c4) Format. definitions Are Provided Elsewhere In The Contract/purchase Order. 3.4.1 Waivers/deviations - All Waivers And Deviations, Regardless Of Significance Or Classification Require Review And Approval By The Contracting Officer. Waivers And Deviations Must Be Designated As Critical, Major, Or Minor. The Contractor Must Provide A copy Of This Request To The Qar. Requests Must Include The Information Listed Below. A. A Complete Description Of The Contract Requirement Affected And The Nature Of The Waiver/deviation (non-conformance), Including A Classification Of Critical, Major, Or Minor. B. Number Of Units (and Serial/lot Numbers) To Be Delivered In This Configuration. C. Any Impacts To Logistics Support Elements (such As Software, Manuals, Spares, Tools, And Similar) Being Utilized By Government Personnel Or Impacts To The Operational Use Of The Product. D. Information About Remedial Action Being Taken To Prevent Reoccurrence Of The Non-conformance. 3.4.2 All Requests For Waivers/deviations On Navsup-wss Contracts Must Be Submitted To The Navsup Wss Contracting Specialist Via Email. 3.4.3 Ecps - The Government Will Maintain Configuration Control And Change Authority For All Modifications Or Changes Affecting Form, Fit, Function, Or Interface Parameters Of The Equipment And Its Sub-assemblies. The Contractor Must Submit An Engineering change Proposal (ecp) For Any Class I Or Ii Changes That Impact The Equipment Covered By This Contract. Ecps Must Be Prepared In Contractor Format, And Must Include The Following Information: A. The Change Priority, Change Classification (class I Or Class Ii), And Change Justification. B. A Complete Description Of The Change To Be Made And The Need For That Change. C. A Complete Listing Of Other Configuration Items Impacted By The Proposed Change And A Description Of The Impact On Those Cis. D. Proposed Changes To Documents Controlled By The Government. E. Proposed Serial/lot Number Effectivities Of Units To Be Produced In, Or Retrofitted To, The Proposed Configuration. F. Recommendations About The Way A Retrofit Should Be Accomplished. G. Impacts To Any Logistics Support Elements (such As Software, Manuals, Spares, Tools, And Similar) Being Utilized By Government Personnel In Support Of The Product. H. Impacts To The Operational Use Of The Product. I. Complete Estimated Life-cycle Cost Impact Of The Proposed Change. J. Milestones Relating To The Processing And Implementation Of The Engineering Change. 3.4.4 A Copy Of The Final Waiver/deviation (both Approved And Disapproved) Must Be Forwarded With The Applicable Asset(s). 3.5 Certificate Of Compliance - (special Emphasis Material) The Contractor Must Prepare And Submit A Certificate Of Compliance Certifying That The Items/components Furnished Under This Contract Comply With The Requirements Of The Procurement Document, including Any/all Invoked Specifications And Drawings. ^ Quality Assurance Requirements ^ 3.6 Quality System Requirements - The Contractor Furnishing Items Under This Contract/purchase Order Must Provide And Maintain A Quality System In Accordance With Iso-9001 As Amplified Or Modified Herein, With The Calibration System Requirements Of Iso-10012 or Ansi-z540.3 With Iso-17025. A Quality System In Accordance With Mil-i-45208, With The Calibration System Requirements Of Mil-std-45662, Is Acceptable As An Alternate. 3.6.1 The Contractor's Quality System And Products Supplied Under The System Are Subject To Evaluation, Verification Inspection, And Acceptance/nonacceptance By The Government Representative To Determine The System's Effectiveness In Meeting The Quality requirements Established In The Contract/purchase Order. 3.6.2 The Contractor's Quality System Must Be Documented And Must Be Available For Review By The Contracting Officer Or His Representative Prior To Initiation Of Production And Throughout The Life Of The Contract. The Prime Contractor Must, Upon notification, Make His Facilities Available For Audit By The Contracting Officer Or His Authorized Representative. 3.6.3 See Cdrl Di-qcic-81110 (inspection System Procedures) - All Suppliers Of Deep Submergence Systems Program (dssp) Material Are Required To Submit A Copy Of Their Current Documented Quality System Procedures To The Procurement Contracting Officer (pco) prior To Award Of Any Contract/purchase Order. Suppliers That Have A Copy Of Their Current Quality System Procedures On File At Navicp-mech May Request The Pco Waive This Requirement. 3.6.4 This Contract Provides For The Performance Of Government Quality Assurance At Source. The Place Or Places Of Performance May Not Be Changed Without The Authorization Of The Procurement Contracting Officer. Upon Receipt Of This Order, Promptly notify The Government Representative Who Normally Services Your Plant So That Appropriate Planning For Government Inspection Can Be Accomplished. If You Do Not Have An Assigned Government Representative, Notify The Nearest Defense Contract Management Agency (dcma) Office. In The Event That A Local Government Representative Or Dcma Office Cannot Be Located, Our Purchasing Agent Should Be Notified Immediately. 3.6.5 Any Changes Made By The Contractor To A Qualified Quality System Will Require Concurrence By The Government Quality Assurance Representative Prior To Adoption. 3.7 Contractor Inspection Requirements - The Contractor Must Maintain Adequate Records Of All Inspections And Tests. The Records Must Indicate The Nature And Number Of Observations Made, The Number And Type Of Deficiencies Found, The Quantities Approved and Rejected And The Nature Of Corrective Action Taken As Appropriate. 3.7.1 The Supplier's Gages, Measuring And Test Equipment Must Be Made Available For Use By The Government Representative When Required To Determine Conformance With Contract Requirements. When Conditions Warrant, The Supplier's Personnel Must Be Made available For Operations Of Such Devices And For Verification Of Their Accuracy And Condition. 3.7.2 All Documents And Reference Data Applicable To This Contract Must Be Available For Review By The Government Representative. Copies Of Documents Required For Government Inspection Purposes Must Be Furnished In Accordance With The Instructions provided By The Government Representative. 3.8 Subcontractor Inspection Requirements - The Government Has The Right To Inspect At Source, Any Supplies Or Services That Were Not Manufactured/performed Within The Contractor's Facility. Such Inspection Can Only Be Requested By Or Under Authorization Of the Government Representative. Any Purchasing Documents To A Subcontractor Must Cite The Applicable Portions Of The Contractually Invoked Quality System (e.g. Calibration Requirements), Plus Any Product Requirements That Apply To The Supplies Being Purchased. when The Government Elects To Perform Source Inspection At The Subcontractor's Facility, Applicable Purchase Documents Must Be Annotated With The Following Statement: "a Government Inspection Is Required Prior To Shipment From Your Plant. Upon Receipt Of this Order, Promptly Notify The Government Representative Who Normally Services Your Plant So That Appropriate Planning For Government Inspection Can Be Accomplished. If You Do Not Have An Assigned Government Representative, Notify The Nearest Defense Contract management Agency (dcma) Office. In The Event That A Local Government Representative Dcma Office Cannot Be Located, Our Purchasing Agent Should Be Notified Immediately." 3.9 Government Furnished Material And/or Equipment (gfm/gfe) - When Material Or Equipment Is Furnished By The Government, The Contractor Must Develop Documented Control Procedures That Require At Least The Following: 3.9.1 Visual Examination Upon Receipt To Detect Damage During Transit. 3.9.2 Inspection For Completeness And Proper Type. 3.9.3 Verification Of Material Quality Received. 3.9.4 Periodic Inspection And Precautions To Assure Adequate Storage Conditions And To Guard Against Damage From Handling And Deterioration During Storage. 3.9.5 Functional Testing, Either Prior To Or After Installation, Or Both, As Required By The Contract To Determine Satisfactory Operation. 3.9.6 Identification And Protection From Improper Use Or Disposition. 3.9.7 Reporting To The Government, Any Gfm Or Gfe Property Found Damaged, Malfunctioning, Or Otherwise Unsuitable For Use. In The Event Of Damage Or Malfunction During Or After Installation, The Supplier Must Determine And Record Probable Cause And necessity For Withholding The Material From Use. 3.9.8 For Gfe Material, And As Required By The Terms Of The Bailment Agreement, The Supplier Must Establish Procedures For Adequate Storage, Maintenance, And Inspection Of Bailed Government Material. Records Of All Inspection And Maintenance Performed On bailed Property Must Be Maintained. 3.9.9 Material Returned To The Contractor Must Be Handled As Gfm. 3.10 Traceability And Certification Requirements - To Assure That Correct Materials Are Installed In Dssp Systems, It Is Imperative That Traceability Be Maintained From The Material To All Required Objective Quality Evidence (oqe). 3.10.1 The Following Provides The Minimum Requirements For Maintaining Material Traceability And Supplements The Requirements Specified Elsewhere In The Contract/purchase Order. 3.11 Material Traceability - Traceability Markings Must Be Permanently Applied To The Material In Accordance With Mil-std-792 Or To A Tag Affixed To The Material, And Annotated On The Required Oqe. The Traceability Marking May Be Any Vendor Traceability number/code Which Provides Complete Traceability To The Required Oqe. Traceability Marking/identification May Include Such Items As Nomenclature, Part Number, Technical Description, National Stock Number (nsn), Etc. Traceability Must Be Maintained Through All process Operations Including Any Subcontracted Operations, To The Finished Component. 3.11.1 When Traceability Markings On The Material Would Be Removed By A Manufacturing Or Fabrication Process, The Marking Must Be Recorded Prior To Removal And Be Immediately Restored Upon Completion Of The Process. If This Cannot Be Done Or Is Impractical, an Appropriate Material Control Procedure (such As A Bag And Tag, Tagging, And/or Tote Box Control) Must Be Employed. the Material Control Procedure Must Provide A Method Of Positive Control To Preclude Commingling Of Material Or Loss Of Traceability. The Traceability Marking Must Be Reapplied Upon Completion Of The Final Manufacturing Process. 3.11.2 The Material Control Process Must Include Requirements For The Maintenance Of Traceability For Items Sent Out For Subcontracted Operations. If Such Operations Would Remove Traceability Markings On The Material, Purchase Or Work Orders Must Specify A method And Marking Location For Remarking. The Contractor Must Also Ensure That Subcontractor Production Controls Are Adequate To Preclude Commingling Of Materials During Processing. 3.12 Final Inspection - The Following Inspections Must Be Performed Prior To Government Inspection And Acceptance. 3.12.1 Material Sampling - Material Must Be Inspected For Form, Fit, And Function. Lot Acceptance Must Be Based On Zero Defects And Lot Rejection Based On One Defect. The Sample Size Must Be In Accordance With The Sampling Plan(s) In The Applicable Military specification Or Standard, Federal Specification Or Standard, Or Drawing To Which The Material Was Manufactured. In The Absence Of Such Sampling Plans, Sampling Inspection Must Be Per Ansi/asq-z1.4, General Inspection Level Ii (for Sample Size Selection Code), table Iia (for Sample Size). small Lot Sizes - For Lot Sizes Of Fifty Or Less, The Minimum Sample Size Must Be Eight Units. For Lot Sizes Of Eight Or Less, The Sample Size Must Be One Hundred Percent Of The Lot. 3.12.2 The Manufacturer May Elect To Use Statistical Process Control (spc) To Assure Product Quality In Lieu Of The Above Attribute Sampling Plan, Provided That The Spc Methodology/system Used Provides Acceptable Products To The Government. However, The government Inspection Activity May Perform Their Acceptance Inspection Of The Material Using The Attribute Sampling Plan Outlined Above. 3.12.3 All Oqe Required By The Contract And All Data Concerning Material Traceability (oqe To Traceability Marking) Must Be 100% Inspected. The Certification Test Reports Must Also Be 100% Inspected For Completeness And Legibility. 3.13 Test Certification - When Test Certifications Are Required Elsewhere In The Contract, Certification Documents Must Be Positive And Unqualified. Disclaimers Such As "to The Best Of Our Knowledge" Or "we Believe The Information Contained Herein Is True" are Not Acceptable. 3.13.1 If Material Is Received Without The Required Test Certification Papers Or With Incorrect/missing Data On The Certification Papers, The Material Will Be Rejected. 3.14 See Cdrl Di-ndti-80603a - Cleaning - Prior To Performing Any Cleaning, The Applicable Cleaning Procedure Must Be Submitted For Review And Approval. If The Contractor's Cleaning Procedure Has Previously Been Approved By Navsea For This Or Other contracts, A Copy Of The Original Approval Letter Must Be Submitted In Lieu Of The Actual Procedure. 3.14.1 When Cleaning Is Performed By A Subcontractor, The Requirements For Submission Of All Documentation Required Herein Must Be Passed Down To The Subcontractor. 3.15 See Cdrl Di-misc-80678 (special Emphasis C Of C) - The Certificate Of Compliance Must Show Traceability To The Marking Applied On Each Individual Item, And Must Contain The Following Information: 1. Contractor's Name, Address, Phone Number And Date. 2. The Contract/purchase Order Number (i.e. N00104-11-p-fa12). 3. The National Stock Number (nsn). The 18 Character National Stock Number For Special Emphasis Material Includes The Two Digit Cog, The Four Digit Fsc, The 9 Digit Niin, And The Two Digit Smic (i.e. 1h 4820 012345678 D4) ("n/a" When Not Applicable). 4. Lubricants, Sealants, Anti-seize, And/or Thread Locking Compounds. ("n/a" When Not Applicable). 5. Cure Date ("n/a" When Not Applicable). 6. Manufacturer's Compound Number ("n/a" When Not Applicable). 7. When Weld Procedure Submittal Is Required By The Contract, A Statement That The Approval Date Of The Qualification Data Precedes Any Production Or Repair Welding Performed On This Contract. ("n/a" When Not Applicable). 8. A Statement For Any Hull, Mechanical And Electrical (hm&e) Testing Required That Include The Name Of The Test And That It Was Performed Satisfactorily. If No Hm&e Testing Is Required, The Statement Should Read "hull, Mechanical And Electrical (hm&e) Testing n/a." 9. A Statement To The Effect That All Items Furnished On This Contract Are In Full Compliance With The Specifications And Requirements. 10. Contractor's Or Authorized Personnel's Signature. 3.15.1 For Connectors, Cables, And Junction Boxes Procured To Eb Specs S-5343934-1, S-5343934-2, S-5343934-3, Or Dry Deck Shelter Specification S-5486639-1, The Certificate Of Compliance Must Also Include The Information Below: 11. A Notation That 32 Root Mean Square (rms) Finishes Are In Accordance With The Specifications And Are Free Of Imperfections. 12. Direct Reading Of O-ring Surface Diameters With Specified Standard. 3.15.2 For Self-locking Hex Nuts Procured To Nasm 25027, The Certificate Of Compliance Must Also Include The Information Below: 13. A Statement To The Effect That Qualification Testing In Accordance With Nasm 25027 Paragraph 3.2 Is Satisfactorily Performed. 4. Quality Assurance 4.1 Notes To Dcma Qar And The Contractor - 4.1.1 Dcma Qar And The Contractor For Proprietary Designs - Departures From Contractor Imposed Requirements, Not Specifically Covered By The Contract, Must Be Judged Individually On The Basis Of The Effect, If Any, On Contractual Requirements. When There Is A disagreement Between The Contractor And The Government Representative As To The Effect On Contractual Requirements, The Departure Must Be Considered A Nonconformance And Be Submitted To The Pco For Disposition. 4.1.2 Dcma Qar And The Contractor For Proprietary Designs - All Records Of Departures From Contractor Imposed Requirements Must Be Maintained And Available For Review At The Contractor's Facility. A Copy Must Be Given To The Local Government Representative. A record Of These Departures, Traceable To The Applicablepart Number And Contract Number Must Be Submitted To The Pco. 4.1.3 Dcma Qar And The Contractor For Proprietary Designs - For Proprietary Designs, The Contractor's Part Numbers Are Acceptable For Reference Only. The Delivered Material Must Conform To All Drawings, Specifications, And Other Contractual Requirements. 4.1.4 Dcma Qar - It Is The Responsibility Of Dcma Qar To Review Non-destructive Testing (ndt) Procedures For Navsup Contracts/purchase Orders. 4.1.5 Dcma Qar And The Contractor - The Ecds (electronic Contractor Data Submission) System Is Available For Certain Data Submissions And To Submit Questions And Clarifications, And Waiver Requests On Contracts And Solicitations. Ecds Can Be Found At: https://register.nslc.navy.mil/ 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Must Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Several Definitions Of Terms That Apply To Csi Items Are Listed Below. All Terms May Not Apply To Every Item. 6.1.1 The Ecds (electronic Contractor Data Submission) System Is At: Https://register.nslc.navy.mil/ This Application Will Require Advance Registration Using A Pki Digital Certificate On A Cac. A Vendor User Guide Is Available As Csd001 In The Csd (contract Support Document) Library Within Ecds. 6.1.2 Critical Safety Item (csi) - Any Ship Part, Assembly, Or Support Equipment Containing A Critical Characteristic Whose Failure, Malfunction, Or Absence Of Which Could Cause A Catastrophic Or Critical Failure Resulting In Loss Of, Or Serious Damage To The ship, Or Unacceptable Risk Of Personal Injury Or Loss Of Life. 6.1.3 Critical Process - As Determined By The Twh, Any Process, Operation Or Action Performed On A Ship Csi That Serves To Establish A Critical Characteristic (such As Welding, Soldering, Machining, Polishing, Cleaning, Or Assembling) Or Confirm That A critical Characteristic Is Within Drawing Or Specification Compliance (such As, Testing, Measurement, Or Non-destructive Evaluation). 6.1.4 First Article - Pre-production Models, Initial Product Samples, Test Samples Produced To Ensure A Manufacturer's Capability To Meet Full Specification Requirements. 6.1.5 First Article Test (fat) - Contractually Required Testing And Inspection Of A Supplier's Pre-production, Production, Or "production Representative" Specimens To Evaluate A Manufacturer's Ability To Produce Conforming Product Prior To The Government's commitment To Receive Subsequent Production Items. First Article Testing Is Product Specific And Does Not Assess Manufacturing Process Controls Nor Does It Assure The Effectiveness Of The Manufacturer's Quality Program. 6.1.6 Government Source Inspection (gsi) - Gsi Is Independent Oversight Performed By A Government Representative Usually A Dcma Quality Assurance Representative (qar)) To Assure That Those Unique Product Quality And System Elements, Identified By The contracting Agency As Important, Are Observed And Evaluated. 6.1.7 Quality Assurance Letter Of Instruction (qali) - A Qali Is A Formal Document Initiated By A Contracting Activity That Provides Essential Requirements And Instructions For Contracted Materials To Be Independently Verified And Accepted By A Government representative Prior To Shipment. 6.1.8 Objective Quality Evidence (oqe) - The Quantitative And Qualitative Data Of All Mechanical, Chemical, And Performance Tests Performed (as Required By The Applicable Specification, Drawing, Or Purchase Document) To Prove That The Material Supplied conforms To The Specified Requirements. 6.1.9 Surface Discontinuity - Any Surface Irregularity, Marking, Or Localized Change In Physical Character Of The Surface, Other Than Dimensional, That Exists Infrequently At One Or Several Places. (examples: Burrs, Dents, Nicks, Scratches, Gouges, Pits, center-punches, Scribes, And Tool Marks) Surface Discontinuities Less Than 0.005-inch In Depth Are Acceptable Provided They Do Not Violate Any Other Design Requirements Specified In This Contract/purchase Order. 6.1.10 Traceability Code - A Code Or Number Providing Traceability To The Actual Chemical And Mechanical Properties Of The Specified Heat, Batch, Or Form From Which The Material Originated. 6.1.11 Verification - An Examination Performed To Determine Compliance With A Specific Requirement. 6.1.12 Nonconformance - A Nonconformance Is Defined As Affecting Or Violating The Following: - The Requirements Of This Contract/purchase Order. - Contractually Invoked Drawings (i.e. Envelope Dimensions, Interface Dimensions With Mating Parts/equipment, Center Of Gravity, Weights, Piece Part Identification, Material, Etc.). - Contractually Invoked Federal, Military, Or Commercial Specifications And/or Standards. - Form, Fit, Function, Performance To Contract Requirements, Reliability, Maintainability, Interchangeability, Safety Of Personnel Or Equipment, Or Additional Cost To The Government. 6.1.13 Waiver - A Written Authorization To Accept An Item, Which During Manufacture, Or After Having Been Submitted For Government Inspection Or Acceptance, Is Found To Depart From Specified Requirements, But Nevertheless Is Considered Suitable For Use As Is or After Repair By An Approved Method. 6.1.14 Deviation - A Specific Written Authorization (granted Prior To The Manufacture Of An Item) To Depart From A Particular Requirement(s) Of An Item's Current Approved Configuration Documentation For A Specific Number Of Units Or A Specified Period Of time, And To Accept An Item Which Is Found To Depart From Specified Requirements, But Nevertheless Is Considered Suitable For Use "as Is" Or After Repair By An Approved Method. 6.1.15 Critical Waiver/deviation - This Waiver/deviation Consists Of A Departure Involving Safety. 6.1.16 Major Waiver/deviation - This Waiver/deviation Consists Of A Departure Involving: - Performance - Interchangeability, Reliability, Survivability, Maintainability, Or Durability Of The Item Or Its Repair Parts - Health Or Safety - Effective Use Or Operation - Weight, Stability, Or Structural Integrity - System Design Parameters As Schematics, Flows, Pressures Or Temperatures - Compartment Arrangements Or Assigned Function 6.1.17 Minor Waiver/deviation - This Waiver/deviation Consists Of A Departure Which Does Not Involve Any Of The Factors Listed As Critical Or Major. 6.1.18 Engineering Change (ec) - A Change To The Current Approved Configuration Documentation Of A Configuration Item At Any Point In The Life Cycle Of The Item. 6.1.19 Engineering Change Proposal (ecp) - A Proposed Engineering Change And The Documentation By Which The Change Is Described, Justified, And Submitted To The Government For Approval Or Disapproval. 6.1.20 Class I Ecp - A Class I Ecp Is Approved By The Government's Configuration Control Board And Authorized With A Contract Modification. 6.1.21 Class Ii Ecp - A Class Ii Change Is Typically Reviewed For Concurrence In Classification By The Local Government Representative, Unless Otherwise Specified Elsewhere In The Contract/purchase Order. 6.2 In Accordance With Opnavinst 5510.1 All Documents And Drawings Provided By The U.s. Navy To Perspective Contractors Must Include A "distribution Statement" To Inform The Contractor Of The Limits Of Distribution, And The Safeguarding Of The Information contained On Those Documents And Drawings. 6.2.1 There Are 7 (seven) Separate Distribution Statement Codes Used For Non-classified Documents And Drawings. The Definition For Each Is As Follows: a... Approved For Public Release; Distribution Is Unlimited. b... Distribution Authorized To Us Governments Agencies Only. c... Distribution Authorized To Us Government Agencies And Their Contractors. d... Distribution Authorized To Dod And Dod Contractors Only. e... Distribution Authorized To Dod Components Only. f... Further Distribution Only As Directed By Commander, Naval Sea Systems Command, Code 09t. x... Distribution Is Authorized To Us Government Agencies And Private Individuals Or Enterprises Eligible To Obtain Export Controlled Technical Data In Accordance With Opnavinst 5510.161. 6.3 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. Most Specifications Can Obtained Directly From Http://quicksearch.dla.mil/ a. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documentsthat Are Required By Private Industry In Fulfillment Of Contractual Obligationsin Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. b. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. Theymay Be Obtained From The Publishers Of The Applicable Societies. c. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: commander, Indian Head Division, Naval Surface Warfare Center code 8410p, 101 Strauss Avenue indian Head, Md 20640-5035 d. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contractnumber, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. e. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: contracting Officer navsup-wss code 87321 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 f. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered Enue: commanding Officer navsup-wss code 009 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 g. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: commanding Officer navsup-wss code 1 Support Branch 700 Robbins Avenue philadelphia, Pa. 19111-5094 h. Interim Changes And Classified Specifications Must Be Obtained By Submitting A Request On Dd Form 1425 To Navsup-wss. 6.4 Recent Updates - A Short Description Of Recent Updates To The Technical Requirements Of This Item Are Listed Below, Along With An Implementation Date For Each Issue. The Notes Below Are Only A Generic Quick Reference And Are Provided For Convenience only, Detailed Requirements Will Be Defined Elsewhere In The Technical Sections Of This Contract/purchase Order. ;- 10/20/2016 - Updated Ecds Url - Dec 20 2022 - Removed Requirement For Vender To Submit Waivers/deviations In Ecds - Jan 05 2012 - Added Wawf To Forward Approved Waivers/deviations With Final Oqe - Dec 17 2011 - Moved Quality Assurance Text Location For Readability - Jan 19 2011 - Added Notification Of Dcma Upon Contract Award - May 14 2008 - Mil-std-1330 Cleaning Procedures Required - Dec 01 2011 - Moved "notes To Dcma Qar" To Qa Section - Jan 5 2017 - Ecds/csd Info Was Added To Definitions In The Notes Section; date Of First Submission=asreq paragraph 10.4 Of Di-qcic-81110 Does Not Apply. date Of First Submission=asreq block 4 - Paragraphs 10.2.1, 10.2.2, 10.2.3, 10.3, And 10.4 Of Di-misc-80678 Do Not Apply. block 12 - Certification Data Must Be Submitted To Portsmouth Naval Shipyard For Review And Acceptance Prior To Each Shipment Of Material. Certification Documentation Must Be Submitted Via Wawf (wide Area Work Flow). enter In Wawf As Follows: "ship To" N50286 "inspect By" N39040 "accept By" N39040 and Email Notification Field: Port_ptnh_wawf_notification@navy.mil no Material Is To Be Shipped Prior To The Receipt Of Acceptance. date Of First Submission=asreq block 12 - Within 60 Days After Contract Award And Prior To Performing Any Cleaning, Submit One Copy To The Pco. note: If This Procedure Has Been Previously Approved By Navsea, Submittal Of The Original Approval Letter In Lieu Of The Procedure Is Acceptable. the Review (approval/disapproval) Must Be Within 60 Days From Date Of Receipt.

Details: *notice: This Is A Sources Sought Announcement. No Proposals Are Being Requested Or Accepted At This Time. This Is Not A Solicitation For Proposals And No Contract Shall Be Awarded From This Synopsis. * supporting Documents: draft Performance Work Statement (available Upon Request) comment Resolution Matrix system Requirements Document (available Upon Request) purpose the Purpose Of This Sources Sought Is To Conduct Market Research To Determine If Responsible Sources Exist, To Assist In Determining If This Effort Can Be Competitive And/or A Total Small Business Set-aside. The Proposed North American Industry Classification Systems (naics) Code Is 811210 Electronic And Precision Equipment Repair And Maintenance. The Government Will Use This Information To Determine The Best Acquisition Strategy For This Procurement. The Government Is Determining Interest From Small Businesses, To Include 8(a) Service-disabled Veteran Owned, Hubzone, And Women-owned Small Business. The Government Requests That Interested Parties Respond To This Notice, If Applicable, And Identify Your Small Business Status. Additionally, Please Provide Any Anticipated Teaming Arrangements, Along With A Description Of Similar Services Offered To The Government And To Commercial Customers During The Past Three Years. Any Responses Involving Teaming Agreements Should Delineate Between The Work That Will Be Accomplished By The Prime Contractor And The Work Accomplished By The Teaming Partner(s). The Government Is Flexible With The Naics Code And Companies Can Recommend Other Codes If They Feel A Different One Would Be More Applicable. this Is Not A Solicitation For Proposals, Proposal Abstracts, Or Quotations. The Purpose Of This Notice Is To Obtain Information For Planning Purposes Only. This Notice Does Not Constitute A Request For Proposal (rfp), Request For Quote, Invitation For Bid, Nor Does It In Any Way Restrict The Government To An Ultimate Acquisition Approach. The Government Encourages All Responsible Businesses, Including Small Businesses, To Respond To This Sss; However, The Government Is Not Liable For Any Costs Incurred By Any Respondent To Prepare And/or Submit Its Response To This Sss. The Government Will Not Return Submittals To The Sender. as Stipulated In Far 15.201(e), Responses To This Notice Are Not Considered Offers And Cannot Be Accepted By The Government To Form A Binding Contract. No Solicitation (request For Proposal) Exists Currently; Therefore, Do Not Request A Copy Of The Solicitation. The Decision To Solicit For A Contract Shall Be Solely Within The Government’s Discretion. Respondents Will Not Be Individually Notified Of The Results Of Any Government Assessments. The Government’s Assessment Of The Capability Statements Received Will Factor Into Any Forthcoming Solicitation Which May Be Conducted As A Full And Open Competition Or As A Set-aside For Small Business. remote Visual Assessment System Description the Remote Visual Assessment (rva) System Provides Video Surveillance Of Top-side Activity At The Usaf Minuteman Iii (mmiii) Launch Facilities (lfs), Missile Alert Facilities (mafs) And Missile Support Centers (msc). Rva Is A Diverse Network Distributed Across Three Missile Wings (mws): Malmstrom Afb, Mt (wing I), Minot Afb, Nd (wing Iii), And Fe Warren Afb, Wy (wing V), Strategic Missile Integration Complex (smic) At Hill Afb, Ut, Jgsoc Barksdale, La And Network Operations Center (noc) Near Hill Afb, Ut. The System Provides Real-time Threat Assessment And Situational Awareness For Critical Nuclear Assets By Security Forces (sf). Rva Consists Of A Fixed Camera And A Pan-tilt-zoom (ptz) Camera Mounted On The Same Pole, Outside The Fence Of Each Lf. Signals Are Transmitted Through Point To Point (ptp) Radios, Utilizing Supporting Network Equipment Including Routers, Switches, Firewalls And Cabling. The Rva System Is Running 24/7 At All Locations And Data Transmission Is Secured Through End-to-end Encryption. rva Is Currently Being Sustained On A Contractor Logistic Support (cls) Contract. The Cls Contract Provides Efficient And Effective Depot-level Maintenance For: 1) Physical Interfaces At The Lf; 2) Physical Interfaces At Monitoring Stations; 3) Rva Surveillance System; 4) Rva Monitoring System; And 5) Rva Data Transmission System. The Standalone Rva Components Are All Commercial-off-the-shelf (cots), Integrated Into A System. launch Facility lfs Are Unmanned Facilities Where Operational Mmiii Missiles Are Located. The Rva System Monitors The Top Side Of The Lf For Sfs. Rva Equipment At The Lf Externally Mounts To A Concrete Pole At Approximately 30 Feet High Outside Of The Lf Fence. The Equipment Is Stored In A Weather-rated Enclosure. The Enclosure At The Lf Has Sensors To Detect Door Tampering/unauthorized Access, Which Triggers A Notification; The Fsc At The Affected Maf Will Receive A Visual Notification Alarm. The Fixed Camera And The Ptz Camera Are Attached To The Enclosure Containing All Supporting Equipment. The System Uses Ptp Radios To Communicate With The Fsc At The Maf. The System Uses Infrared (ir) Illuminates To Enhance Nighttime Visibility. Rva Uses The Digital Video Recorder (dvr) Located Inside The Enclosure To Store Captured Video Data. missile Alert Facility mafs Are Protected Facilities Manned Via 24/7 Rigorous Access Controls. The Maf Has Cameras At Each Facility And Communication Equipment Requiring Periodic Maintenance. The Fsc Has Full Control Over Two Cameras At Each Of 10 Lfs They Are Overseeing. The Maf Workstation Is Located In The Security Control Center. A Workstation Consists Of One Computer With Two Monitors. The Networking Equipment Transmits Data From The Workstation To The Network Video Recorder (nvr) And Is Stored In A Locked Communication Room. Some Networking Equipment Is Stored In A Weather-rated Box, At The Base Of The Communication Tower Inside The Perimeter Fence. Additional Networking Equipment Is Located Inside The Communication Room. The Towers Range From 120 To 300 Feet Tall. Certified Climbers Are Required To Perform Maintenance And Inspection On Towers. missile Support Center the Msc And Alternate Msc Are Located At Each Of The Three Mws. The Msc Contains Two Rva Workstations Used To Monitor Sites At Each Mw. Each Workstation Consists Of One Computer With Two Monitors. The Msc Also Houses Networking Equipment And Servers To Interconnect Rva Assets. Msc Servers And Networking Equipment Are In The Communication Room. trainers the Trainer Facility Provides Training And Certification For Personnel Operating Rva At The Mafs For Each Mw. There Are Six Fsc Trainers, Two At Each Mw. The Workstations Simulate Situations The Fscs May See In The Field. A Workstation Consists Of One Computer With Two Monitors And Is Used To Evaluate The Fsc’s Performance. Each Mw Has Functional Rva Systems Are Located At Lf Trainer Facilities. The Lf Trainers Contain The Same Equipment Located At An Lf. The Fsc And Lf Trainers Are Also Used To Test Software Updates Before New Software Is Deployed To The Operational Sites. towers the Rva System Utilizes Additional Government And Commercially Own Towers Both On And Off The Mw Bases. These Towers Are Use As Repeaters Or As The Receiving Tower For The Msc. The Towers Are Similar To The Maf Towers; However, They Are Not Manned. Several Towers Are Greater Than 100 Feet With Rva Radios And Antennas On The Tower And Equipment Located On Racks At The Base Of The Tower. Certified Climbers Are Required To Perform Maintenance Of Rva Equipment And Inspection On Towers. Several Towers In Montana Are Located At The Top Of Mountains And Require Special Vehicles For Maintenance Access. network Operations Center/security Operations Center the Network Operations Center (noc)/security Operations Center (soc) Performs 24/7 Monitoring And Troubleshooting Of The Rva System Including All Lfs And Mafs Throughout The Mws. The Noc/soc Is Located Near Hill Afb. The Servers And Networking Equipment, Used For Systems Administration, Are Stored At The Noc/soc. The Noc/soc Provides Remote Software Support For Equipment Failure Ticketing/tracking System, Cybersecurity Patches, And All Field Network Support. strategic Missile Integration Complex the Strategic Missile Integration Complex (smic) Provides Integration Testing For Both Hardware And Software Before Installation And Deployment At The Mws. The Equipment At The Smic Has The Same Functionality As Operational Lf And Fsc Workstation At The Maf. software Integration Lab the Software Integration Labs (sil) Are Designed To Test New Software And Hardware For The Rva System. The Sil Refers To The Lf Enclosures And Not Necessarily The Room. Each Mw Has A Slightly Different Lf Enclosure Configuration. Currently There Are Three Enclosures At The Contractor’s Main Facility That Represent Each Of The Mws; Three Enclosures At The Noc That Represent Each Of The Mws; And One Enclosure At Each Of The Three Mws. description Of Cls Performance Activities the Prospective Contract Awardee Will Be Required To Perform Cls Maintenance At All 450 Lfs, 45 Mafs, 3 Mscs, 3 Alternate Mscs, 6 Flight Security Controller (fsc) Trainers, 3 Lf Trainers, Two Additional Command And Control Workstations And The Noc Near Hill Afb. Missile Field And Base Support Activities Will Require The Contractor To Obtain And Maintain A Facility Security Clearance And Employee Security Clearances. Cls Includes Executing Repair/response Throughout The Three Mws, Capturing, Mitigating, And Reporting On All Field Failure Discrepancies And Anomalies That Prevent Full Functional Operation At Each Individual Lf, Maf, Msc, Trainer And The Noc/soc. Monthly Metrics Program Reporting Of Mean Time Between Failure (mtbf), Mean Time To Repair (mttr), And Availability (ao) Is Required Per Contractor Data Requirements List (cdrl) Requirements To Ensure System Readiness And Operational Performance Over Time At Each Site. A Failure Is Defined As: No Lf Video Being Displayed From A Selected Source On The Fsc Workstation. The Metrics For These Indicators Are Cumulative Month Over Month, And Year After Year .i.e. Running Total Of Operational Hours And Failures Used For Calculating Mtbf, Mttr, And Ao. The Selected Contractor Will Be Required To Maintain A Field Discrepancy Database Capturing All Pertinent Program Metrics. the Rva System Has Been In Sustainment Since 2014, And Many Components Of The System Are Becoming Eol/eos. Sustainment Engineering Will Be Required By Cls Contractor To Identify, Configure, Test, And Deploy Suitable Replacements For Those Components. Contractor Will Also Be Responsible For Sustaining And Modifying Existing Software For Cots Integration. Sustainment Engineering May Also Be Required For Any Government-approved Changes To The Configuration Baseline (i.e. Adding Capability To The Rva System). the Cls Contractor Will Also Be Required To Maintain The Rva System’s Authority To Operate (ato) And Authority To Connect (atc) By Implementing Cybersecurity And Meeting All Applicable Risk Management Framework (rmf) Requirements. classification rva Cls Contractor Clearances Are Required To Facilitate Maf Access And Resolve Maintenance Issues. The Government Will Post Responses To Questions That Are Broadly Applicable To All On The Sam.gov Website. The Government Encourages Unclassified Responses To The Maximum Extent Practicable. administration Questionnaire respondents Should Explain Capabilities And Experience That Meets (or Can Be Modified To Meet) Or Exceeds The Requirements For The Rva Cls Effort Listed In The Sources Sought Sections. Respondents Should Submit Questions And Comments Regarding The Documents For This Effort In Writing To The Government. what Is Your Experience/past Performance In Either Designing Or Sustaining Software-intensive Security Surveillance Equipment? what Is Your Experience/past Performance Sustaining Or Modifying Existing Software? what Is Your Experience/past Performance Creating Software For Cots Integration? describe Your Experience Installing, Maintaining, And Testing Equipment In Extreme Conditions And/or At Remote Locations. describe Your Ability To Manage Sub-contractors, In Terms Of Both Schedule And Performance. describe Your Experience Engineering, Maintaining, Troubleshooting And Integrating Networks And Dod-approved Subsystems. if You Plan To Subcontract, What Percentage And Portion Of The Performance Work Statement Do You Intend To Subcontract? if You Plan To Be The Integrator, What Benefit Is There To Having You As The Integrator? describe How Troubleshooting Would Be Covered For The Mws During Business Days, Weekends And Holidays? what Access Do You Have To Government-shared Databases Or How Would You Recommend Reporting And Providing System Data On A Regular Basis To The Government Program Office? what Contract Type Would You Think Is Appropriate For This Cls Effort? what Is Your Ability In Performing The Required Duties As The Rva Network Administration? what Potential Risks Do You See In Terms Of Cost, Schedule, And Performance? what Is Your Experience With Cybersecurity And Information Assurance Requirements? Specifically, Pertaining To Obtaining Network Systems Authority To Operate (atos) And Software Licensing. what Experience Does Your Company Have With The Following: Generating, Editing, Reviewing, And Validating Drawings, Engineering Change Proposals (ecps), Engineering Orders (eos), Preventative Maintenance Processes, Reliability, Availability And Maintainability (ram) Processes? do You Have The Ability To Update This Information (e.g. Engineering Orders, Engineering Change Notices, And Engineering Change Orders)? Please Describe. does Your Company Currently Maintain And Successfully Execute A Configuration Management System (cms) For Hardware, Software, And Documentation? Please Describe. does Your Company Currently Maintain A Facility Clearance? does Your Company Currently Maintain And Successfully Execute A Quality Management System (qms)? Please Describe. does Your Company Have Past Program Experience Executing Closed Loop-corrective Actions And Total Quality Management Fundamentals, Using Failure Reporting Analysis And Corrective Action System (fracas) Based Principles? Please Describe. does Your Company Have Past Program Experience With Frequency Management And Spectrum Approvals? Please Describe. provide Any Additional Recommendations, Questions And/or Concerns That Might Assist With This Solicitation. preface: Company Information please Provide A Cover Sheet With The Following Information: company Information company Name: designated Point Of Contact: name: title: email: phone: mailing Address: business Type/size: cage Code: duns Number: facility Security Clearance: response Instructions & Disclaimers response Format interested Parties Are Requested To Respond With A White Paper In The Following Format: microsoft Word For Office 2007 (or Newer) Compatible 1-inch Margins 12-point Font, Or Larger respondents Should Submit Answers To The Administration Questionnaire Section respondents Should Submit Questions And Comments Regarding The Attached Performance Work Statement Using The Attached Comment Resolution Matrix. All Documents Will Be Provided Upon Request. submission Instructions And Deadline responses Are Requested No Later Than 4:00 Pm. Mst 17 January 2025. Responses Shall Be Submitted Via Email To: Nathan Corey At Nathan.corey.1@us.af.mil questions questions Regarding This Announcement Shall Be Submitted Via Email To The Government Poc Listed Above. Responses To Questions Will Be Posted To The Fbo Website. disclaimer this Ss Does Not Constitute A Solicitation For Proposals Or Any Obligation On Behalf Of The Government. Vendors That Do Not Respond To This Ss Can And Will Allowed To Attend Any Industry Days That May Be Held And Respond To The Future Rva Cls Rfp. The Responses To This Ss Are Not An Offer And Cannot Be Accepted By The Government To Form A Binding Contract. No Contract Award Will Be Made On The Basis Of This Ss. The Government Will Not Pay For Any Information Received In Response To This Ss, Nor Will The Government Compensate Any Respondent For Any Cost Incurred In Developing The Information. Vendor Participation Is Not A Promise Of Future Business With The Government. Any Information Provided In Response To This Ss Will Be Used For Informational Purposes Only And Will Not Be Returned. All Proprietary Information Should Be Clearly Marked As Such. All Information Submitted By Respondents To This Ss, Including Appropriately Marked Proprietary Information, Will Be Safeguarded And Protected From Unauthorized Disclosure. All Personnel Reviewing The Ss Information Have Been Briefed Regarding Non-disclosure And Organizational Conflicts Of Interest (oci) Issues. This Information Is For Market Research Purposes And Should Not Include Contractor Methodologies, Technical Approaches, Or Any Other Information That May Be Considered Trade Secret Or Information That Is Only Used At Contract Proposal. Draft Rfps Will Be Posted As Soon As The Government Has Gathered All Market Research And Have A Tentative Date For Industry Day/one-on-one Sessions. Ss Information Will Not Be Posted But Possible Future Sss May Be Issued If We Have More Questions.

Details: Description Procurement Of Various Equipments For The Enhancement Of Medical Services Of Ospital Ng Malabon 1. The City Government Of Malabon, Through The Malasakit Fund Intends To Apply The Sum Of Thirty Million Pesos Only (p 30,00,000.00), Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Procurement Of Various Equipments For The Enhancement Of Medical Services Of Ospital Ng Malabon. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The City Government Of Malabon Now Invites Bids From Eligible Bidders For Procurement Of Various Equipments For The Enhancement Of Medical Services Of Ospital Ng Malabon. Delivery Of Goods Is Required Within The Period Specified Under Section Vi. Schedule Of Requirements. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act 9184 (r.a. 9184), Otherwise Known As The “government Procurement Reform Act,” And Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To R.a. 5183 And Subject To Commonwealth Act 138. 4. Interested Bidders May Obtain Further Information From The Bids And Awards Committee Secretariat And Inspect The Bidding Documents At The Address Given Below From December 19 – January 8, 2025; 8:00 A.m. To 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders From The Address Below And Upon Payment Of A Non-refundable Fee In The Amount Of Twenty Five Thousand Pesos (p 25, 000. 00). 6. The City Government Of Malabon Will Hold A Pre-bid Conference On December 27, 2024 (friday); 2:00 P.m. At The Bac Conference, 8th Floor Malabon City Hall, F. Sevilla Blvd., Malabon City. 7. Bids Must Be Delivered To The Address Below On Or Before January 8, 2025 (wednesday); 12:00 N.n. All Bids Must Be Accompanied By A Bid Securing Declaration Or Bid Security In Any Of The Acceptable Forms Set In The Amount Stated In Itb Clause 18. 8. Bid Opening Shall Be On January 8, 2025 (wednesday); 2:00 P.m. At The Bac Conference, 8th Floor Malabon City Hall, F. Sevilla Blvd., Malabon City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 9. The City Government Of Malabon Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. For Further Information Please Refer To: (originally Signed) Florlinda Ayroso Head- Bac Secretariat (originally Signed) Mr. Alexander T. Rosete Chairperson - Bids And Awards Committee 1 Unit Automated Identification/anticrobial Sensitivity Testing Machine Weight: 15/30/60 75 Kg/105 Lbs Electrical Power Requirements: • 110/120 Vac (50-60 Hz) • 220/240 Vac (50-60 Hz) Heat Dissipated: 1025 Btu/hr (nominal) Environmental Requirements: • Operating Ambient Temperature Range: 15 Degrees Celsius To 30 Degree Celsius (59 Degree F-86 Degree F) • Operating Humidity Range: 20% To 80% Relative Humidity, Non-condensing Altitude: Up To 2000 Meters Note: Should Be Compatible With Bact/alert Culture Machine 1 Unit Gel Card Laboratory Centrifuge And Incubator For Crossmatching Laboratory Centrifuge Microprocessor Controlled Touch Panel Digital Display Dc Brushless Low-noise Motor Shock Absorber For Reducing Vibration Damping And Automatic Balance Technical Specification: Model: Invitrocent Ref 00710 Max Speed:4000rpm Max Rcf: 1640 X G Max Capacity: 24 Invitrogel Cards Speed Accuracy: + 50rpm. Time Setting Range: 1~99 Min. Power Supply: ~22ov + 10% 60hz 5a Noise: < 65db (a) Dimension: (wxdxh) 370mmx432mmx260mm Package Dimension 570mmx425mmx305mm Weight: Gw; 16.5 Kg; Nw: 15kg Environment Requirements Temperature: 10°c~35°c Laboratory Incubator Microprocessor-controlled High-performance Incubator Accommodates Up To 24 Gel Cards Technical Data: Model: Invitrotherm; Ref0097020 Power Supply: Ac220v+ 50hs-60hz Fuse: 250v 3a 5x20 Temperature Range 35°c ~50°c Accuracy Of The Temperature < + 0.5 Heating Time: (from 20°c To 37°c Min Timing Range 1sec~99min 59sec Display Accuracy: 0.1°c Ambient Temperature: 5°c~30°c Dimensions (wxdxh): 280mm X 380mm X 115mm Weight 6.0kg 1 Unit Immuno-analyzer Throughout: Up To 180 Tests/hour, Measurement Principle: Micron Super Paramagnetic Particles Platform With Alkaline Phosphatase (alp) Labeled Reagents And Amppd Substrate Sample Assembly: Sample Feeder: Continuous Sample Loading And Offloading, Sample Positions: 50, Sample Probe: Steel Probe, Liquid Level Detection, Cl;ot Detection, Horizontal And Vertical Collision Protection, Sample Volume: 10-200ul, With Increment Of 1ul Reagents Assembly: Reagent Disk: 15 Reagent Positions, Continuous Loading, Real-tome Mixing For Magnetic Particles, Cooling System: 2-8'c, Reagent Pack: 50 Tests/pack, 100 Tests/pack, Reagent Scanning:built-in/external Bar Code Reader, Reagent Probe:steel Probe, Liquid Level Detection, Clot Detection, Horizontal And Vertical Collision Protection, Reagent Volume: 10-200ul, With Increment Of 1ul Substrate System: Substrate Bottle: 300/500 Tests Per Bottle, Bottom Piercing, Substrate Loading"patients Who Fail To Arrive For A Scheduled Appointment Will No Longer Receive The Free Thyroid Check-up.: Capable Of Continuous Loading During Testing, Substrate Heating: Constant Heating, Aspiration Volume: 200ul Magnetic Separation Unit: Separation Assembly: 3-phase Magnetic Separation, Temperature: Accuracy: 37+0.3'c Measurement And Reaction System: Detection Mode: Photon Counting, Signal Detector: Photom Multiple (pmt) Photo Counter, Pmt Calibration: Led Reference Module, Incubation Positions: 82, Temperature: Accuracy:37+0.3'c, Mixing Unit: Non-touch Vortexer Mixing Cuvette Loading And Waste Collection: 1 Unit Abg Machine Throughout: Results In 1 Minute After Sample Aspiration Sample Volume:140jul Quality Control: 3 Or 5 Levels Qc, External Electronic Simulator Display: 7-inch Color Lcd Display, 800*480 Interface: 4 X Usb 2.0 Host, 1 X Rs232, Wlan Input Device: Touch Screen And Bar Code Scanner Power Supply: 100-240vac, 50/60hz Battery: 500mah Rechargeable Lithium-ion Battery, 50 Samples Continuous Testing Dimensions (w*h*d): 283*153*310 Mm Weight: 3.65 Kg Operation Environment: 10 C-31 C; %rh: 25%-80%; 70-106.6 Kpa 1 Unit Bpap Machine Ipap/epap: 4-40cm H20/4-25cm H20 • Ventilation Modes: Capap, S, S/t, Pc, T • Target Tidal Volume: 200-1500ml • Breath Rate: 0-40bpm • With Good Humidification System • Alarms For: Patient Disconnection, Apnea, Low Minute Ventilation, Low Tidal Volume, And High Respiratory Rate • Monitoring For: Pressure, Tidal Volume, Minute Ventilation, Respiration Rate, Leak • Filters: Foam And Optional Ultra-fine Filters • Data Management: Encore Pro2 And Direct View Software Compatible With Oximetry Module, Advanced Detection Of Residual Respiratory Events (apnea/hypopapnea Index, Obstructed Airway Apnea, Clear Airway Apnea, Hypoapnea, Periodic Breathing, Large Leak And Snore) 1 Unit Cpap Machine The Res Med Air Sense™ 11 Auto Set With Humid Air Automatically Adjusts Pressure Levels Based On Your Breathing Patterns Throughout The Night. A Crisp, Color Lcd Touchscreen Lets You Customize The Device’s Settings And View Sleep Data. The Machine Includes An Integrated, Heated Humidifier And Climate Line Air Heated Tubing. Chose Between The Standard Humid Air™ Model (tubing Not Included) Or Humid Air™ Model With Climate Line Air™ 11 Tube Included. Temperature And Humidity Can Be Manually Adjusted Or Set For Automatic Climate Control “for Him” And “for Her” Algorithms Are Available Auto-ramp Up To 45 Minutes In 5-minute Increments Climate Line Air Tubing* Included For Automatic Climate Control (not Included With Standard Model) Personal My Air Assistant Guides You Through Device Installation And Therapy Acclimation Care Check-in Feature Provides Coaching And Troubleshooting For New Users Dimensions: 3.72” X 10.71” X 5.45” Weight: 2.3 Lbs. Sound Level: 27 Dba 1 Unit Mechanical Ventilator Modes Available: Vc-ac, Pc-ac, Vc-simv, Pc-simv Pip: 20-70 Cm Of H 2 O (adjustable In Steps Of 1) Peep: 0-20 Cm Of H 2 O (adjustable In Steps Of 1) Inspiratory: Expiratory Ratio (i:e): 1:0.3 - 1:4 (adjustable In Any Ratio) Respiratory Rate (bpm): 10 – 40 Breaths Per Minute In Increments Of 2 Tidal Volume: 150 Ml – 800 Ml In Steps Of 50 Unique On-graph Incentive To Show Current Best Values • Test Quality Advisory Messages And Quality Report • Fully Compliant To Ats/ers 2005 Guidelines • Available With Both Disposable Or Reusable Turbine Flow Meter • Elegant And Robust Carrying Case 2 Units Cardiac Monitor Introduction: Multi Parameter Patient Monitor For High-end Specialist – 12.1”(10.4”) High Resolution(800×600) With Maximum 9 Wave Forms – Standard Configuration: Ecg, Spo2, Nibp, Resp, 2temp, 2ibp – 6 Kinds Of Virtual Screen – 3ch Ecg : Full 7 Ecg & St Segment Analysis (lead I, Ii, Iii, Avr, Avl, Avf, V) – 12ch Ecg : Full 12 Ecg & St Segment Analysis (lead I, Ii, Iii, Avr, Avl, Avf, V1, V2, V3, V4, V5, V6) – 13 Arrhythmia Analysis & Pacemaker Detection – 7days Tabular And Graphic Trend Data Save Multi High-end Functions: – Drug Dose Calculation, Ecg Recall, Mini Trend, Ico, Color Change, Nibp Stat, Nibp Venous Stat, Oxy-crg, Patient Information, Temp Td – Touch Screen (option) – Easy S/w Upgrade Using Sd Card (max 2gbyte) – Durable And Light Long Li-ion Battery Operation (std 1pack: 2hr, 2pack: 4hr) – Lan And Wireless Lan – Variable And World Best Etco2 Module – Oridion’s Microstream Etco2 – Respronics’s Mainstream (c5), Sidestream (loflo) – Hrv, Apg Detection – 12.1″(10.4″) High Resolution(800×600) – Provides Clear Visibility From Long Distance And Any Angle – Maximum 9 Wave Forms – Supreme Standard Configuration And Extensionability – Standard: Ecg, Spo2, Nibp, Respiration, 2temp, 2ibp – Optional: Standard + 4temp, 4ibp, Ico, Etco2, 12ch Ekg, Touch Screen, 3ch Printer – Small Size But Large Virtual Screen – 12.1” Monitor Provides 72.6”(12.1” X 6) View Effect By Using 6 Virtual Screens. – 10.4” Monitor Provides 62.4”(10.4” X 6) View Effect By Using 6 Virtual Screens. – Perfect 3ch Ecg (std.) And 12ch Ekg(opt.) Will Make You Ecg Analysis Specialist. – Livegraphy Waveform By Votem’s Digital Filter Technology – 3ch Ecg (std.) Displays Full 7 Ecg Waves & St Segment Analysis (lead I, Ii, Iii, Avr, Avl, Avf, V) 2 Units Incubator Standard Features: ●servo Control Mode: Air Temperature, Skin Temperature; ● Parameter Displaying: Set Temperature,air Temperature, Skin Temperature, Internal Humidity, Heat Power Rate; ● Audible & Visual Alarms: Power Failure, Sensor Failure, Higher & Lower Temp, Air & Skin Temperature Override,fan Failure, System Failure; ● >37℃preset Mode: Power Failure Reset Memory, Alarm Silence, Keypad Lock, Self-test Function; ● Hood With Dual Slope; 6 Hand-ports; ● Rs-232 Output Connector (use For Network System); ●iv Poles; ●protective Guard Rail; ●storage Cabinets. Specification Of Hood: Mattress To Hood: 450 Mm Observation Side Of Hood: Two Incline Operate Port: 6 (2 Iris Ports) Tubing Grommets: 4 Front Access Panel: 826×310 Mm Technical Specifications: Power Requirement ≤400va Temperature Control Mode: Air And Skin Servo Control Air Temp Control Range: 20℃～37℃ Temperature Override Mode To: 20℃～39℃ Skin Temp Control Range: 30℃～37℃ Temperature Override Mode To: 30℃～38℃ Temperature Fluctuation: ≤0.5℃ Mattress Temperature Uniformity: ≤0.8℃ Temperature Rise Time: ≤45 Min Noise Level Within Hood Environment: ≤55d Alarms Power Failure Alarm Fan Failure Alarm Sensor Failure Alarm High Air Temperature Alarm: +3.0℃ Low Air Temperature Alarm: -3.0℃ High Skin Teperature Alarm: +1.0℃ Low Skin Temperature Alarm: -1.0℃ Over Air Temperature Alarm: ≤38.0℃; ≤40.0℃ Over Skin Temperature Alarm: ≤38.0℃; ≤39.0℃ System Failure Alarm Alarm Silence Function Operational Condition 2 Units Infant Warmer Temperature Control Range: 25°c-37°c Temperature Override Mode To 38°c Temperature Sensor Accuracy: <0.3°c Mattress Surface Temperature Uniformity: <2.0°c Temperature Rise Time: <45mins Heat Output Indicate: 0-100% In 10% Radiant Box Horizon Angle Adjust Range 0-90° Adjustable In Step-less Bed Tilt Adjustment: Continues Adjustable In +10° 2 Units Bilirubin Light/photo-therapy Machine Device Classification Type Of Protection Against Electric Shock Class I Degree Of Protection Against Ingress Of Liquids And Particulate Matter (iec 60601-1) Ipx0 Mode Of Operation Continuous Classification In Accordance With Eu Directive 93/42/eec Iia Umdns Code/gmdn Code 13-037/35239 Physical Attributes Bililux Photo Therapy Light Length ≤39 Cm (15.4 In) Width ≤19 Cm (7.5 In) With Quick-connect Plug Height ≤8 Cm (3.1 In) Weight (without Options/accessories) ≥1.2 Kg (2.7 Lb) Bililux Spring Arm Length, Spring Arm Fully Folded ≤61 Cm (24 In) Length, Spring Arm Fully Extended ≤106 Cm (41.7 In) Weight (without Options/accessories) ≤1.5 Kg (3.3 Lb) Bililux Trolley (with Spring Arm) Height (trolley At Lowest Position And Spring Arm Fully Folded) ≤132 Cm (52 In) Height (trolley At Highest Position, Lower Arm Fully Extended, And Upper Arm At 45° Angle) ≤213 Cm (83.9 In) Weight (without Options/accessories) ≤14.9 Kg (32.8 Lb) Total Mass Including Safe Working Load 18.1 Kg (39.9 Lb) 2 Units Portable Or Light Kl04l-iii Vertical4-reflector Luminescence Shadowless Lamp Kl04l-iii Luminescence Shadowless Lamp Adopts Light Source From Different Positions For Focus To Eliminate Shadows Of Different Parts Of Medical Workers Vertical Mobile Setup With Braking Device Is Not Limited By The Space Of Surgical Room And Is Safe And Reliable In Use Illumination: > 50,000lx (at 1m Distance) Color Temperature: 4000k+500k Mains Voltage: Ac220v+10%50hz Bulb Voltage: Ac24v Bulb Power Input Power: 120va 1 Unit Orthopedic Instrument Set Contents: 77 Pieces With Tray • 1 Pc. Knife Handle #3 • 2 Pcs. Knife Handle #4 • 1 Pc. Mayo Dissecting Scissor Straight 5 1/2″ (14cm) • 1 Pc. Mayo Dissecting Scissor Curved 5 1/2″ (14cm) • 1 Pc. Mayo Dissecting Scissor Straight 6 3/4″ (14cm) • 1 Pc. Mayo Dissecting Scissor Curved 6 3/4″ (14cm) • 1 Pc. Metzenbaum Scissor Curved 7″ (17.8cm) • 1 Pc. Esmarch Bandage And Cast Shears 8″ (20.3cm) • 1 Pc. Tissue Forcep 6″ (15.2cm) 1x2t • 1 Pc. Tissue Forcep 6″ (15.2cm) 4x5t • 2 Pcs. Adson Tissue Forceps 4 3/4″ (12.1cm) 1x2t • 6 Pcs. Crile Forcep 6 1/4″ (15.9cm) Curved • 4 Pcs. Rochester Ochsner Forcep Straight 8″ (20.3cm) • 6 Pcs. Backhaus Towel Clamp 5 1/4″ (13.3cm) • 1 Pc. Mayo Hegar Needle Holder 8″ • 1 Pc. Crile Wood Needle Holder 6″ • 1 Set Us Army Retractor 8 1/2″ Set Of 2 Pcs. • 1 Pc. Israel Retractor 9″ (22.9cm) 4 Prong Blunt • 1 Pc. Volkman Retractor 8 3/4″ (922.2cm) 4 Prong Sharp • 2 Pcs. Volkman Retractor 8″ (20.3cm) X 3/4″ (19cm) 4 Prong Blunt • 1 Pc. Bennett Bone Elevator 9 1/2″ (24.1cm) Small • 1 Pc. Bennett Bone Elevator 9 1/2″ (24.1cm) Large • 6 Pcs. Allis Tissue Forcep 6″ (15.2cm) 4x5t • Pc. Frazier Ferguson Suction Tube Fr-8 (2.6mm) • 1 Pc. Frazier Ferguson Suction Tube Fr-12 (4mm) • 1 Pc. Beyer Rongeur 7″ (17.8cm) Curved • 2 Pcs. Schnidt Tonsil Forcep 7 1/2″ (19.1cm) • 1 Pc. Ruskin Bone Cutting Forcep 7 1/2″ (19.2cm) Angled • 1 Pc. Stile-luer Rongeur 8 3/4″ (22.2cm) Curved • 2 Pcs. Kern Bone Holding Forcep 7″ (22.9cm) • 1 Pc. Lane Bone Holding Forcep 13″ (33cm) W/ Ratchet • 1 Pc. Lowman Bone Clamp 4 1/2″ (12.7cm) • 1 Pc. Lowman Bone Clamp 7 1/4″ (20.3cm) • 2 Pcs. Bone Hook 9″ (22.9cm) Sharp • 1 Pc. Miltex Mallet 11 (27.9cm) 16oz (454g) • 1 Pc. Bone File 9 ¾’ 3 Units Infusion Pump Delivery Rate: 1-1000ml/h.01-999.9ml/h Delivery Limit Range: 01-9999ml Pumping Mechanism: Linear Peristaltic Finger Accuracy: + 5 (ml/h Control Mode/with Approved Iv Set) K.v.o Rate: 1ml/h-10ml/h (adjustable) Purge Rate: 1-1000ml/h (adjustable) Bolus: 1-1000ml, 1-9999ml (adjustable) Dimension: 100x190x250 (mm)/weight:3.5kg) Power: Ac110-230v, 50/60hz Or Dc9, 6v, Dc24v (1a) Battery Type: N-cd (standard)/ni-mi+ (option) Operating Time: 4 Hours (at 125ml/h) 1 Unit 2d Echo Bed 19”-38” Height Range Meets The Americans With Disabilities Act (ada) Low Height Requirement Of 17”-19” For Patient Transfer, While Ensuring Ergonomic Standing Posture For Staff • Optional Battery Operation • Dual Rapid Release Drop Sections Provide Unhindered Access To The Patient • 65° Fowler Positioning Increases Comfort Of/for Patients With Shortness Of Breath • +/- 15° Trendelenburg Helps Restore Patient’s Blood Pressure • Improved Features: New Handrail Design, Improved Single Pedal Braking System, Foley Bag Hook, Hand Control Storage, Battery Operation 1 Unit X-ray Tube Varian Rad-14, 0.6-1.2 Focal Spot, Diamond Housing X Ray Tube - 89011n 3 Units Examining Table • Examination And Treatment Table, Hamilton Type, With Drawer And Compartment Door, Upholstered Three Section Top, Provided With Stirrup And Sliding Foot Stool. • Size: 58 Inc. X 20 Inc. X 34 Inc. 3 Units Transfer Stretcher Bed Technical Specifications Frame: Powder Coated Steel Or Better Backraise Inclination: Atleast 0 To 35 Degrees Has Adjustable Height Side Guard: Made Of Abs Plastic Or Better Castor Wheels: Manufacturer's Standard Max Load: At Least 150kg Weight: Manufacturer's Standard Dimensions: L X W X H = 2000mm X 700mm X 700mm, ± 100mm On Each Dimension Accessories: -has Oxygen Cylinder Holder -has Iv Pole Holder Located In 4 Different Positions -with One Iv Pole 1 Unit Vein Scanner Technical Specifications • Type: Light Weight, Mobile • For Obese/bloated, Neonate, Pedia, Elder And Dark Skin Patients • Display: Dlp Display Or Better • Infrared Wavelength: At Least 850nm • Image Resolution: At Least 856*480 Pixels • Visible Vein Size: ≥1 Mm Or Better • Penetration Depth: ≤8 Mm • Optimal Imaging Distance: At Least 15 ~ 25cm • Mode: Basic, Inverse And Enhanced • Imaging Color: Single Color And Mixed Colors • Image Sizes: Has Small, Medium And Large Sizes • Brightness: Adjustable To Low, Medium And High • Power Supply: 220v, 50/60hz • Battery Type: Rechargable Lithium Battery At Least 3000mah • Battery Capacity: At Least 2 Hours Fully Charged • Dimension: Manufacturer's Standard • Net Weight: Manufacturer's Standard • Accessories: - Battery And Charger - Charging Cord - Trolley With 5 Castor Wheels 1 Unit Newborn Hearing Test Machine Specifications: • Display: At Least 42.7mm X 33.4mm Or 1.7 In X 1.3in • Resolution: At Least 160x128 • Dimension: Manufacturer's Standard • Weight: Manufacturer's Standard • Warm-up Time <5s Or Shorter • Boot-up Time: 1min Or Shorter • Mode Of Operation: Continous • Connectors - Oae: Hdmi Connector For Connection To The Micro Probe - Usb: Micro Usb • Data Interface - Pc Connection: Micro Usb - Printing: Wireless Connection • User Feedback - Accoustic: Integrated Speaker - Visual: Color Display Oled - User Interface: Oled Display To Provide User Information And Progress Of Measurement • Battery - Type: Rechargeable Thium-ion Np 120 Or Better - Capacity: 1700 Mah Or Better - Expected Life Time: 3 Years Or Better - Battery Life: 15 Hours On Time • Memory: At Least 500 Test Dpoae • Stimulus - Frequency Range: 1500 Hz To 12 Hz - Frequency Accuracy: <1% - Nominal Frequency: F2 - F2/f1 Ratio: 1.2 - Level Range: 40db Spl To 70db Spl - Level Accuracy: ± 1.5db Or Better - Default Level (l1/l2): 65db / 55db Spl With In Ear Calibration - Transducer: Oae - Recording - Probe Fit Check: Low Frequency Level Loss - Display: Snr Bars Or Line Diagram With Oae And Noise Level Per Frequency - Pass Criteria - Snr Criteria: 6db - Frequency For Pass: 3 Transducer • Oae Probe • Microphone: - 20 Db Spl At 2 Khz (1 Hz Bandwith) • System Noise: - 13 Db Spl At 1 Khz (1 Hz Bandwith) • Cable Length: At Least 110 Cm Or 43in • Connector: Hdmi Or Better Printer • Print Mode: Thermal Dot Matrix Print • Printing Width: At Least 48 Mm (1.9in) • Resolution: 8 Dots/mm (203 Dots Per In (dpi)) • Dots Per Line: At Least 384 Dots Accessories And Inclusions • Battery Pack: 2 - Cell Li-ion Battery Pack 7.4 V -1500 Mah • Eartips: Box Of Eartips • Set Of Probe Tubes Standard Certifications • Device Certification From Nhsrc • Device Certification From Fda 1 Unit Automated External Defibrillator (aed) • Two-button Operation: On/off, Discharge (shock Button) • Voice Prompts: Voice Command That Gives Instruction To The User In Operating The Device • Automatically Evaluates Patient Impedance For Proper Pad Contact. • Automatically Analyses Patient Condition For Shockable Or Non-shockable Rhythms • Patient Ecg Can Be Acquired Through Defibrillator Pads • Energy Output Accuracy: ± 15% • Pulse Shape: Biphasic • Charge Time: Maximum Of 15 Seconds • Battery Capacity: Capable Of Providing At Least 200 Discharges At Maximum Energy • Replaceable Battery • Visible And Audible Indicators: - Low Battery - Pad Skin Contact/disconnection - Aed Status • Defibrillator Pads: Self-adhesive, Disposable And Non-polarized - At Least Ten (10) Pairs For Adult - At Least Ten (10) Pairs For Pedia

Details: Reconstruction of the Existing Footpath on the Left Side of the Road in the Direction of Milčice From the Crossing for Pedestrians at the Pečka Bus Stop, Velké Chvalovice, Width of the Footpath 1.5 M (up to 2.4 M), the Footpath is Transferred to the North Side of the Road by a Place Allowing Crossing (between No. 4 A 5, P. no. 174/3), Pedestrian Crossing Is Proposed Place of intersection with Ul. Ke Dráze (at No. 135, At No. 177) – Connection of the Footpath Route Through the New Path for Pedestrians and Cyclists; New buildings Paths for pedestrians and cyclists on the right side of the road in the direction of Milčice, Width Mainly 2.4 M, Locally Reduced At No. 7, U P. no. 153 On 1.5 MZ Due to the Narrow Profile of the Site (a 130 cm high Railing will be installed) AU No. 198, U P. no. 107/5 Due to the Elevation of the Roadway and the Presence of Existing Exits, Connecting to the Existing Path for Pedestrians and Cyclists by Modifying the Intersection Ul. Ke Hřišti A Ul. Milčická, with a crossing for pedestrians and a crossing for cyclists (at the Chapel of St. John of Nepomuck in Velké Chvalovice); Construction of a Crossing Area at No. 146, U P. no. 205; Lighting Transitions; Directional adjustment of existing communication in Ul. Milčická In the section between Křižovatka S Ul. To The Track And To The Field, Designed About The Width Of 6 MS By Expanding In The Directional Arc; Adjustment of slopes, construction of drainage, execution of vertical and horizontal traffic markings, public lighting and public radio, vegetation adjustments. Note: Sat 105 Dopravní Ostrůvek, Incl. Relevant Parts of Vertical and Horizontal Traffic Markings, Public Lighting (2 Pcs Including Cable Lines) and Vegetation Treatments (Establishment of Approx. 73 M2 of Lawn), Already Implemented and Not Part of the List of Works, Supplies and Services. The performance of works within the framework of Sat 402 and Sat 403 of the network relocation is not the subject of this public order. Part of the performance of the Public Contract is, among other things, the performance of all activities related to the delivery of construction works and constructions, the performance of which is necessary for the proper completion and operation of the work. The implementation of the Public Contract will be carried out in accordance with the principle of "significantly do not harm" (dnsh) in the area of the environment. The Estimated Value Indicated Including the Value of Reserved Changes to Contractual Obligations.