Cable Tenders

Details: The subject of the performance of the public contract is the reconstruction of the lighting system using an economical solution thanks to the technology of LED lamps. The lighting system is powered by cable and air lines. Before the implementation itself, traffic safety will be ensured at the place of construction and assembly work. Construction must be coordinated with the owners of the technical infrastructure and the owners of adjacent communications or land. During the reconstruction of the lighting system, the system's power supply will first be disconnected from the distribution network. After that, disassembly of the reconstructed part will be carried out according to the measurement sheet. Within the framework of the reconstruction of the lighting system of ground communications, complete arming of the individual main switchboards is being considered to ensure the proper functioning of the work. Electricity meter switchboards and invoicing measurements in take-off points fed from the NN distribution network must be carried out according to the requirements of the electricity distributor. The Switchgear Must Be Equipped With Fault Protection And Automatic Disconnection From The Source With Protective Grounding And Protective Bonding Under Specified Conditions Must Be Provided. Where it is not possible to achieve automatic disconnection within the required time due to the high impedance of the fault loop, additional bonding must be carried out. The Switchboard Must Be Adapted To Install Limiters To Limit High Inrush Currents Caused By Switching Led Technologies That Must Meet Electromagnetic Compatibility. After the completion of the replacement of all lamps according to the project, a revision report and passporting of public lighting will be made.

Details: Description Gov. Celestino Gallares Multi-specialty Medical Center Invitation To Bid For Supply, Delivery, Installation, Testing And Commissioning Of 4 Lots Various Medical Equipment (batch 2) For Gov. Celestino Gallares Multi-specialty Medical Center 1. The Gov. Celestino Gallares Multi-specialty Medical Center (gcgmsmc), Through The Health Facilities Enhancement Program 2024 Intends To Apply The Sum Of Ninety-two Million Pesos Only (php92,000,000.00) Being The Abc To Payments Under The Contract For Cb-2024-11-0004. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Gcgmsmc, Through The Health Facilities Enhancement Program 2024 Intends To Apply The Sum Of Ninety-two Million Pesos Only (php92,000,000.00) Being The Abc To Payments Under The Contract For Each Lot/item.et Al. Lot No. Item/description Quantity Unit Cost Total Cost 1 Treadmill With Electrocardiogram, Exercise / Stress Testing System + Cardiovascular Information System 1 35,000,000.00 35,000,000.00 2 Portable X-ray Machine 1 17,000,000.00 17,000,000.00 3 Ultrasound Machine 1 20,000,000.00 20,000,000.00 4 Flexible Endoscopy 1 20,000,000.00 20,000,000.00 Grand Total 92,000,000.00 Bids Received In Excess Of The Abc For Each Lot Shall Be Automatically Rejected At Bid Opening. 2. The Gcgmsmc, Now Invites Bids For The Above Procurement Project. Delivery And Installation Of The Goods Is Required Within 120 Calendar Days Upon Receipt Of Notice To Proceed. Bidders Should Have Completed, Within 3 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Gcgmsmc Through Electronic Mail Via Procurement@cpspecialtycenter.org Or Through The Cellular Number 09209437250. 5. A Complete Set Of Bidding Documents May Be Acquired And Downloaded By Interested Bidders From Gcgmsmc Google Drive From (procurement@cpspecialtycenter.org) On November 15- December 10, 2024 And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Indicated Below In Accordance With The Following Schedule: Lot No. Item/description Total Cost Bidding Documents Fee (in Philippine Peso) 1 Treadmill With Electrocardiogram, Exercise / Stress Testing System + Cardiovascular Information System 35,000,000.00 25,000.00 2 Portable X-ray Machine 17,000,000.00 25,000.00 3 Ultrasound Machine 20,000,000.00 25,000.00 4 Flexible Endoscopy 20,000,000.00 25,000.00 The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Through Online Banking Or Online Deposit With The Following Bank Details: Bank Name: Development Bank Of The Philippines Account Name: Gcg Multi-specialty Medical Complex Account Number: 00-0-15490-780-5 "for Bidders Choosing To Pay Via Online Transfer Or Bank Deposit, Please Ensure That Proof Of Your Successful Transaction Is Promptly Sent To The Procurement Email Address: Procurement@cpspecialtycenter.org. In Compliance With Coa Circular Number 2021-014, Clause 5.2, An Acknowledgement Receipt Will Be Issued As Proof Of Verified And Received Payment. Access To Bidding Documents Will Be Granted Only Upon Presentation Of This Acknowledgement Receipt. 6. The Gcgmsmc Will Hold A Pre-bid Conference On The 27th Day Of November 2024 At 0900h At Room 3c-e310 Located At The 3rd Floor Of Gcgmsmc Building C, Malayo Sur Cortes, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission On Or Before The 10th Day Of December 2024 At 0900h At Gcgmsmc Procurement Office Room 3c-w327 Located At The 3rd Floor Of Gcgmsmc Building C, Malayo Sur, Cortes, Bohol. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On The 10th Day Of December 2024 At 0900h At Room 3c-e310 Located At The 3rd Floor Of Gcgmsmc Building C, Malayo Sur Cortes. Bids Will Be Opened In The Presence Of The Bidders’ Authorized Representatives Together With Their Company Id. 10. The Gcgmsmc Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. Submission Of Hardcopies: The Winning Bidders Shall Submit Their Original Eligibility And Technical Documents Described In Itb Clause 10 In One Sealed Envelope Marked "original - Technical Component", And The Original Of Their Financial Component In Another Sealed Envelope Marked "original Financial Component", Sealing Them All In An Outer Envelope Marked "original Bid". Each Copy Of The First And Second Envelopes Shall Have 2 Copies And Similarly Sealed Duly Marking The Inner Envelopes As "copy No. 1 Technical Component" And "copy No. 1- Financial Component” And "copy No. 2- Technical Component" And "copy No. 2- Financial Component" And The Outer Envelope As "copy No. 1" And "copy No. 2" Respectively. These Envelopes Containing The Original And The Copies Shall Then Be Enclosed In One Single Envelope. Please Take Note That All Notarized Documents Must Be Treated As Original Copies For All The Submitted Documents (original, Copy 1, And Copy 2). It Is Imperative That Each Copy Retains Its Original Notarization To Ensure Legal Validity And Compliance. The Original And The Number Of Copies Of The Bid As Indicated In The Itb Clause 15 Shall Be Typed Or Written In Ink And Shall Be Signed By The Bidder Or Its Duly Authorized Representative/s. All Envelopes Shall: A. Contain The Name Of The Contract To Be Bid In Capital Letters; B. Bear The Name And Address Of The Bidder In Capital Letters; C. Be Addressed To The Procuring Entity's Bac In Accordance With Itb Clause 1; D. Bear The Specific Identification Of This Bidding Process Indicated In The Itb Clause 1. 12. For Further Information, Please Refer To: Mary Grace L. Simbajon Jessa O. Quiñal Procurement Office Procurement Office Malayo Sur, Cortes, Bohol Malayo Sur, Cortes, Bohol Procurement@cpspecialtycenter.org Procurement@cpspecialtycenter.org +639209437250 +639452478632 November 14, 2024 Approved By, (signed) Doreen A. Lugo, Lpt Bac Chairperson Noted By, (signed) Laurence Elliot R. Tirol, Md, Fpcp Medical Center Chief I Head Of Procuring Entity --------------------------------------------------------------------------------------------------------- 1 1 Lot Supply, Delivery, Installation, Testing & Commissioning Of Treadmill With Electrocardiogram, Exercise / Stress Testing System + Cardiovascular Information System Treadmill With Electrocardiogram, Exercise / Stress Testing System Power Supply : Ac Operation; Input Voltage: 200 To 240 Volts Ac; Power Consumption: 350 Watts Max Display : At Least 22 Inch Diagonal Display Size; Resolution: At Least 1680 X 1050 Pixels; Tiltable Height Adjustable Flat Screen For Optimal Positioning Dedicated Workflow Keys Risk Stratification: Critical Algorithms, Including Heart Rate Recovery (hrr) And T-wave Alternans (twa) Functional Response: Metabolic Equivalents (mets) Level Indicated During Procedure Ischemia Detection: St/hr Hysteresis Analysis Which Improves Cad Detection Wireless Acquisition: Use Of Wireless Technology To Obtain Signals Or Data Capable Of Creating A Remote Workstation On Any Pc For Viewing Editing And Printing Stress Data Capable Of Adding Automated Blood Pressure And Oxygen Saturation Data Into The System System Is Capable Of Integrating With Stress Echocardiography, Nuclear Imaging, And Ambulatory Blood Pressure Analysis Open System Architecture Uses Industry Standard Communication Protocols Such As Dicom And Xml; Data Export Via Xml, Pdf And Xls To Match Emr Or His Files Automative Timeout And Log-in For Increased Security Advanced Security Protections Include Data Encryption, Username And Password Authentication, Secure Network Connections, Electronic Delivery Of Security Patches And Updates, Constant Threat Monitoring And Disaster Recovery Plan Weight: Patient Weight Capacity (kg): Up To 227; Treadmill Net Weight (kg): Up To 193 Power Requirements: 220/240 Vac, 1-phase, 50-60 Hertz, 20-amp Power Supply; Must Have Dedicated 15a Service Speed Range: 0.1 To 15.0 Miles Per Hour, 0.2 To 24.0 Kilometers Per Hour; Self-calibrating; Adjustable In 0.1 Mph Or 0.1 Kph Increments Incline Range: 0 To 25%, At Least 0.5% Incremental Movements; Self-calibrating Running Surface: At Least 56 By 160 Centimeters (cm); Running Belt Tracking System; Cushioned Running Deck Absorbs Shock Of Foot Falls; Self-lubricated And Reversible Running Deck; Step-up Low Profile Deck Height: At Least 18 Cm From Floor. Communication Ports: Rs232 Female Serial Port; Usb 1.0 “b” Port. Floor Surface Footprint: At Least 84 By 200 Cm Level Surface. Dual Comparative Speed Sensors Auto Runaway Shutdown Auto Communication Loss Shutdown Manual Twist Lock Emergency Stop Button Manual Stop Tether Braking System For Safe Patient Off-loading Fire Rated Motor Pan Hood Enclosure Cardiovascular Information System The System Shall Allow Cardiac Technologists To Enter Comments Which Will Not Be Reflected In The Report Or Distributed To Electronic Medical Record (emr). The Gui Should Allow Searching In Forms – Quick Search Of Specific Field Name, Label Or Value In Forms With Immediate Link Which Takes The User To The Field And Highlights It For Documentation. The Gui Should Allow Searching For Values Within Reports. The System Should Support Structured Reporting, With Quick Reports, Side By Side Reporting, And Real-time Synchronization Of The Report To Data Fields In The Form. Report Templates Must Be User-definable. The Reporting System Shall Be Able To Auto Populate Findings Where Relevant And The Cardiologist Must Be Able To Override Any Auto Populated Data. The System Should Support Comprehensive Reporting Functions For Structural Heart End-to-end Electrophysiology (ep) Workflow In Conjunction With Ep Recording System In The Market Pediatric Echo Reporting Incorporated With Boston Z-scores The System Should Support Ingestion And Non-editable Display Of Pdf Reports From 3rd Party Systems, Such As Hemodynamic Systems, Including Trackings/full Disclosure From Holter Monitoring Systems Or Ecg Management Systems The System Shall Be Able To Receive Studies Sent Directly From Modalities And Devices (without Drawing From Digital Imaging And Communications In Medicine (dicom) Modality Worklist). The System Shall Be Able To Automatically Create Patients From Received Studies, If The Patient Is Not Yet Available In The System Database. The System Shall Prevent Separate Cardiologists From Simultaneously Reporting On The Same Examination, And Alert The Users. The System Shall Have A Charge Verification And Communication Functionality To Hospital Billing It Systems. The System Should Support Result Distribution In A Variety Of Formats, Including Hl7, Pdf, And Sending Discrete Xml Values To External Systems Embedded Advanced Post-processing Tools For Cath And Us (2d, 3d And 4d) Via Dedicated Ultrasound Reporting System/picture Archive Communication System Embedded 3d Advanced Visualization With Advanced Processing Web-enabled Deployment Cardio Imaging Solution Integration 1280 X 1024 Resolution Particulars Workstation: (1) Unit Windows 10 64bit Or Newer Version X86 Microprocessor, Ram - At Least 32gb Ssd - At Least 512gb, Network - At Least 1gb With Peripheral Component Interconnect Express Slot For Medical Graphic Controller Worklist Monitor: (1) Unit Of At Least 27" Monitor Warranty : 5 Years And On The Graphic Controller, 20,000 Hours Backlight Warranty Guaranteed At 400cd/m2 Calibrated Luminance. Minimum Of Five (5) Year/s For Spare Parts & Service Upon Acceptance By End-user Conduct Free Preventive Maintenance At Least Semi-annually Or According To Manufacturer's Recommendation/s Within Warranty Period. Corrective Maintenance Within A Maximum Of Fourteen (14) Days Upon Notification From End-user; Technical Support Staff Response Time Within At Least Two (2) Hours Via Remote Access Or Maximum Of Twenty-four (24) Hours Either Via Physical Presence On Site. Equipment Down-time Within Warranty Period Due To Inherent Defect/s And/or Fault/s Shall Be Added To The Total Warranty Period Availability Of Support Staff Within Visayas Delivery, Installation, Commissioning, Permit/s, Training And Other Related Expenses Incurred Will Be Shouldered By Winning Bidder, Where Applicable Vendor Must Provide Intensive Operational Or Application Training With Certification/s For End-user/s And Intensive Technical Training For Maintenance/biomedical Staff. Vendor Must Have Existing/active Quality Management System Certification E.g. Ce0123 (medical Device), Or Its Equivalent For Importation, Warehousing, Installation & Servicing Of Active And Non-active Medical Services. Vendor And / Or Manufacturer Must Provide Fda Certificaton: Fda 510(k) K131246 Or Its Equivalent, If Applicable Vendor Shall Agree To Provide Factory Or Principal Manufacturer Training And/or Certification For At Least One (1) In-house Biomedical Technologist Or It Personnel And/or Other End User. Progress Billing And Payment May Be Availed By The Winning Bidder As Follows, Otherwise, Full Payment Is Due At The Completion Of The Project And Requirements: 15% Upon Delivery At Site; 30% Upon Complete Installation, And 55% Upon Completion Of Project And/or Acceptance Of End-user. Vendor Shall Warrant That The Product Supplied Shall Meet The Published Specifications. Vendor Shall Provide No Less Than Five (5) Years Warranty On Each Of The Equipment For Spare Parts And Service Upon Acceptance By End User/s. Vendor Agrees To Provide Free Of Charge All Parts And Labour Necessary To Repair Each Of The Equipment Purchased During The Period Covered By The Warranty And Replacement Of Any Item/s And/or Part/s Found To Be Defective In Material Or Workmanship Under Normal Use. Equipment Shall Be Delivered Complete With All Cabling, Connectors, And All Other Accessories Necessary For Full Operation Of The Equipment, Where Applicable. Vendor Must Certify That All Products Quoted Must Be In Current Production And Publicly Available As Of The Date Of This Tender. Unproven Future Products Shall Not Be Accepted. All Desired Features Listed Must Be In Current Production, Installed And In Use At The Time Of Quote/bid. Equipment Must Meet All Currently Applicable Safety Standards, Local And International Where Applicable. Vendor May Include Post-warranty Comprehensive Preventive Maintenance Program Proposal For The Next 3-4 Years And Must Also Indicate Cost Estimated For Major Spare Part/s. Any And All Components Not Manufactured By The Vendor/primary Manufacturer Shall Be Listed As Such With Name/address/contact Information Of The Manufacturer Supplied. Vendor Shall Provide Automatic Voltage Regulator (avr) And Uninterrupted Power Supply (ups) To Back Up The System. Equipment Shall Be Delivered With At Least Two (2) Copy Of All Service Manuals And At Least Two (2) Copy Of All User Manuals. Certification From The Manufacturer That The Units Are Brand New And Not With Any Issues Or Defect. Vendor Shall Confirm And Certify In Writing That Parts And Labor Will Be Available For The Quoted Equipment For Not Less Than Five (5) Years After The Warranty Period. Principal's/manufacturer's Product Portfolio Must Have Been Present In The Local Market For The Past Ten (10) Years. Equipment Must Be Manufactured By A Known And Reputable Company With Certificate Of Iso 9001:2015 And/or Iso 13485:2016 Or Its Equivalent. Completion Period For Delivery Must Not Exceed 120 Calendar Days And Succeeding Installation Must Not Exceed 120 Calendar Days. Any Deviation From This Limit Requires Prior Approval By The Head Of The Procuring Entity (hope) And Only Applies During Extenuating Circumstances. Completion Period For Delivery Must Not Exceed 120 Calendar Days And Succeeding Installation Must Not Exceed 120 Calendar Days. Any Deviation From This Limit Requires Prior Approval By The Head Of The Procuring Entity (hope) And Only Applies During Extenuating Circumstances. Principal’s / Manufacturer’s Products Must Have Been Present In The Local Market For The Past Ten (10) Years Vendor Shall Provide Integration, Interoperability And Migration Solutions Exclusively Using Filmless Platforms Such As Medical Grade Clinical Monitors, 2d/3d Workstations, Dicom Enabled Printers And Cd/dvd Medical Disc Publishers, Medical Film Digitizers , Dicom Archives, Foresight Analog To Digital Conversion System, Mri Compatible Infusion Pump And Patient Monitor, And Digital Or Suites ----------------------------------------------------------------------------------------------- 2 1 Lot Portable X-ray Machine General Information General Purpose Digital Mobile Xray For Patient In Recumbent And Seated 32 Kw At 100 Kv 100 Ms Large Focus And 16 Kw At 100 Kv 100 Ms Small Focus Non Motorized Examination Can Be Performed By Connecting To The Mainpower Switch 2-axis Counterbalanced Column Arm With 90° Tube Head Rotation And ± 317° Arm Rotation Allows Easy Adjustment For All The Different Projections Generator Power Output: Large Focus: At Least 32 Kw At 100 Kv 100 Ms Small Focus: At Least 16 Kw At 100 Kv 100 Ms Kvp Range: 40 Kv To 150 Kv Mas Range: 0.32 Mas To 200 Mas Kvp Accuracy: < ± 3 Kv (40 Kv To 60 Kv); < ± 5 Kv (60 Kv To 150 Kv) Mas Accuracy: At Least ± 0.1 Mas (0.32 Mas To 2 Mas); ± 6 % (> 2 Mas) Shortest Exposure Time: At Least 1 Ms Max. Exposure Time: At Least 3.2 S Exposure Release: Handswitch With 5 M Coiled Cord Or Infrared Remote Control 1 Protection Against Electric Shock: Class I Acc. To Iec 60601-1 Xray Tube Tube Housing (single Tank With Rotating-anode Tube) Stabilization: Microprocessor-based Adjustment And Regulation During Exposure Focal Spot Nominal Value: Dual (0.6 Mm / 1.2 Mm) Anode Angle: At Least 16° Anode Speed: At Least 180 Hz (high Speed) Heat Storage Capacity Of Tube Housing: At Least 830 Kj (1170 Khu) Heat Storage Capacity Of Anode: At Least 210 Kj (300 Khu) Collimator: Manually Adjustable Multileaf Collimator, Rotatable ± 90° Collimator Light And Light Field Intensity: Led Min. 180 Lux At 1 M Sid Advanced Collimator: Pediatric Filters For Lower Dose Imaging And V-laser For Even More Magnesium-alloy Shell-type Frame Dose Area Product Measurement Chamber Typical Filtration: At Least < 0.4 Mm Al Equivalent Dap Resolution: At Least 0.01 Μgym2 Maximum Measurable Dap: 1 X 105 Μgym2 Flat Panel Wireless Detector Wireless Detector: At Least 35 Cm X 43 Cm (14 In X 17 In) Detector Detector Technology: Csi Scintillator, Amorphous Silicon (a-si) Detector Acquisition Matrix: At Least 2304 X 2800 Pixels (full Iq Performance Area) Pixel Size: At Least 150 Μm Acquisition Depth (gray Scales): At Least 16 Bit Active Area: Up To 34.6 Cm X 42.0 Cm (13.6 In X 16.5 In) Thickness: At Least 15 Mm (0.6 In) Detector Weight: ≤ 3.7 Kg (8.2 Ibs) With Battery Max. Load: At Least 300 Kg (661 Ibs) (patient Lying Down) And At Least 100 Kg (220 Ibs) (patient Standing) Data Transfer: W-lan, 802.11 A/b/g/n/ac Battery Operation Capacity: At Least 8 Hours Operation Time With At Least 320 Images, 1 Image Every 90 Sec And At Least 840 Images In Operation Mode, 1 Image Every 30 Sec. Built-in Rechargeable Battery Battery Operating Time Of At Least 8 Hours Of Continuous Use Charging Location: External Battery Charger Charging Time From Empty State To Full Charge: Within 3 Hours Image Acquisition Image Display: Fit To Window View Of Full Image Image Processing Functions: Rotation, Vertical And Horizontal Flipping, Zoom,windowing For Contrast/brightness, Black/white Image Inversion Graphic Functions: Quantification With Angle Distance Measurement Text Functions: Marking, Annotations, Image Comments, R/l Markers Tube Line Enhancement: Amplified Display Of Tubes And Lines In The Image For Position Control Security: Malware Protection Data Transfer Dicom Network Interfaces: Transmission Of Images To A Dicom Network For Viewing And Archiving Confirmation From The Image Archive Storage Commitment Printing Of Images To A Dicom Laser Camera Via Virtual Film Sheet Retrieval Of Images To A Picture Archival System Get Worklist Function For Importing Patient Data From A Data Management System (ris/his) Cr And Dx Worklist Entries Modality Peroformance Procedure Step Function For Sending Examination Statistics And Dose Information To A Data Management System Sending Of Dose Values For Each Study To An Archiving System Documentation Image Data Management: Export To Usb Device In Jpg, Dicom Dcm Or Dicom Raw Transmission Of Images To Network Automatic And Selective Printing With Virtual Film Sheet Provide- Statistics Of Rejected Images Significant Features Wlan Connectivity For Increase Reach And Improved Connectivity Pediatric Filters Transparent Filters For Lowering The Patient Entry Dose Remote Service That Allows Hardware And Software Diagnosis, Customer Care Service And System Configuration Accessories Radiation Protection Equipment, Such As Lead Gowns, Gonadal Shields, And Thyroid Shields. Vendor Shall Warrant That The Product Supplied Shall Meet The Published Specifications. Warranty Period For Five (5) Years After The Acceptance. Minimum Of Five (5) Year/s For Spare Parts & Service Upon Acceptance By End-user. Vendor Must Repair Or Replace Any Item And/or Part/s Of The Equipment Found To Be Defective In Material Or In Workmanship Under Normal Use, Provided That The Equipment Is In Good Working Condition Thereafter, Within The Warranty Period. Conduct Free Preventive Maintenance At Least Semi-annually Or According To Manufacturer's Recommendation/s Within Warranty Period. Corrective Maintenance Within A Maximum Of Fourteen (14) Days Upon Notification From End-user; Technical Support Staff Response Time Within At Least Two (2) Hours Via Remote Access Or Maximum Of Twenty-four (24) Hours Either Via Physical Presence On Site. Equipment Down-time Within Warranty Period Due To Inherent Defect/s And/or Fault/s Shall Be Added To The Total Warranty Period. Availability Of Support Staff Within Visayas. Delivery, Installation, Commissioning, Permit/s, Training And Other Related Expenses Incurred Will Be Shouldered By Winning Bidder, Where Applicable. Vendor Must Provide Intensive Operational Or Application Training With Certification/s For End-user/s And Intensive Technical Training For Maintenance/ Biomedical Staff. Must Certify The Availability Of Spare Parts For The Next Five (5) Years. Vendor Must Have Existing/active Quality Management System Certification (e.g. Ce0123 Medical Device), Or Its Equivalent For Importation, Warehousing, Installation & Servicing Of Active And Non-active Medical Services. Vendor And / Or Manufacturer Must Provide Fda Certificaton: Fda 510(k) K170476 Or Its Equivalent. Shall Be Delivered With At Least Two (2) Copies Of User Manuals. Vendor Must Certify That All Products Quoted Must Be In Current Production And Publicly Available As Of The Date Of This Tender. Unproven Future Products Shall Not Be Accepted. All Desired Features Listed Must Be In Current Production For At Least 2 Years, Installed And In Use At The Time Of Quote/bid Vendor Shall Agree To Provide Factory Or Principal Manufacturer Training And/or Certification For At Least One (1) In-house Biomedical Technologist Or It Personnel And/or Other End User. Progress Billing And Payment May Be Availed By The Winning Bidder As Follows, Otherwise, Full Payment Is Due At The Completion Of The Project And Requirements: 15% Upon Delivery At Site; 30% Upon Complete Installation, And 55% Upon Completion Of Project And/or Acceptance Of End-user. Completion Period For Delivery Must Not Exceed 120 Calendar Days And Succeeding Installation Must Not Exceed 120 Calendar Days. Any Deviation From This Limit Requires Prior Approval By The Head Of The Procuring Entity (hope) And Only Applies During Extenuating Circumstances. Principal’s / Manufacturer’s Products Must Have Been Present In The Local Market For The Past Ten (10) Years Any And All Components Not Manufactured By The Vendor/primary Manufacturer Shall Be Listed As Such With Name/address/contact Information Of The Manufacturer Supplied Vendor Shall Confirm And Certify In Writing That Parts And Labor Will Be Available For The Quoted System For Not Less Than One (1) Year After The Warranty Period Vendor Shall Provide Integration, Interoperability And Migration Solutions Exclusively Using Filmless Platforms Such As Medical Grade Clinical Monitors, 2d/3d Workstations, Dicom Enabled Printers And Cd/dvd Medical Disc Publishers, Medical Film Digitizers , Dicom Archives, Foresight Analog To Digital Conversion System, Iramed, Mri Compatible Infusion Pump And Patient Monitor, And Digital Or Suites Vendor To Shoulder Any Expenses Related To Delivery, Installation, Commissioning, Permit/s,training And Other Sundries Necessary For The Complete Installation Of The Equipment ------------------------------------------------------------------------------------------------------------ 3 1 Lot Ultrasound Machine Electrical Power Voltage: 100 - 240 Vac Frequency: 50/60 Hz Power Consumption: Maximum Of 0.9 Kva With Peripherals Console Design At Least 4 Active Physical Probe Ports, At Least 1 Inactive Probe Storage Port Wireless Probe Connection, Capable Of Connecting Wireless And Linear Probe. Integrated Ssd (at Least 1 Tb) Integrated Dvd-r Multi Drive On-board Storage Of Thermal Printer With Inclusion Of At Least 10 Rolls Of Thermal Paper Integrated Locking Mechanism That Provides Rolling Lock And Caster Swivel Lock Front And Rear Handles Easily Removable Air Filters Operating System: Windows 10 Enterprise Ltsc 2019 (64-bit) Keyboard Operating Keyboard Adjustable In Height And Rotation Ergonomic Hard Key Layout Interactive Back-lighting Integrated Recording Keys For Remote Control Of Up To 4 Peripheral Devices Or Dicom Devices Integrated Gel Warmer Touch Screen At Least 12-inch High-resolution, Color, Touch, Display Screen Interactive Dynamic Software Menu Brightness Adjustment Key/feature Monitor At Least A 23.8-inch Wide, High-resolution High Definition Unit Display. Can Be Moved At Least 350 Mm (13.7 Inches) Horizontally In Both Directions. Can Be Moved At Least 150 Mm (5.9 Inches) Vertically At Least A 90° Swivel In Both Directions. Fold-down And Lock Mechanism For Transportation Resolution: At Least 1920 X 1080 Pixels. Anti-glare Viewing Angle: 89°/89°/89°/89°. Transducer Type Sector / Phased Array Curved Linear Array Microcurved Linear Array Linear Array Matrix Array (linear) Volume Probes (4d) Split Crystal Transesophageal Echocardiogram (tee) Probe Operating Modes Capability Brightness Mode / 2d Grayscale Motion Mode Color Flow Mode Power Doppler With Directional Map Non Doppler Color Flow For Hemodynamic Study Digital Tgc With 8 Independent Controls System Features Pre-programmable Categories Simplified User Interface For High Volume Workflow Maximum System Bandwidth: 25 Mhz Cine Memory: At Least 1 Gb Connectivity: (a) Can Do Lan Or Wireless (b) Dicom 3.0 (c) Public Sr Template (d) Structured Reporting Compatible With Vascular, Obstetric (ob), Cardiac And Breast Standards (e) Remote Monitoring Scanning Parameters Digital Beamforming;infinite Number Of Effective Channels Frame Rate: At Least 9,000 Hz Displayed Imaging Depth: 0 – 100 Cm Doppler Mode: (a) Prf: 0.4 Khz - 35.5 Khz (b) Velocity Range: ± 10 - 2,870 Cm/s Minimum Depth Of Field: 0 - 2 Cm (zoom) (probe Dependent) Maximum Depth Of Field: 0 – 100 Cm (probe Dependent) Continuous Dynamic Receive Focus Software Features Automatic Optimization Optimize B-mode Image To Help Improve Contrast Resolution With One Button Press Selectable Amount Of Contrast Resolution Improvement (low,medium, High) Continuously Adjusts B-mode Axial And Lateral Gain Uniformity And Overall Gain Level Suppressing The Noise Adjusts Region Of Interest Position, Sample Volume Position, And Steering With One Button Press Capable Of Non Doppler Color Flow For Hemodynamic Study Easy, Fast Visualization Of Tiny Vessels, Displaying As A 3d Effect. Available In Color, Power Doppler And Microvascular Imaging (mvi) Assistant Protocol Workflow Enhancement Tool For Standardized And Repetitive Exams Include Factory Programs User-defined Programs And Import Functionality Steps Include Image Annotations, Mode Transitions, Basic Imaging Controls And Measurement Image Comparison Side-by-side Comparison Of Previous Ultrasound And Other Modality Exams During Live Scanning Strain Elastography Qualitative And Semi-quantitative To Assess The Stiffness Of A Tissues. Should Be Able To Have A Qualitative Graph To Show Consistency Of Compression Available On Convex, Linear And Endovaginal Probe Shear Wave Elastography Quantitative Software For Assessing The Stiffness Of A Tissue. Measured In Kpa Or M/s Or Kpa And M/s With Quality Mode Can Do Multiple Acquisition Of Frames In One Breath Hold Able To Do A Re-measure In The Archives Available On Convex, Linear (low And High Frequency) And Endovaginal Probe Live Steatosis Quantification Able To Quantify Fatty Liver Hepatic Protocol Able To Measure Liver Steatosis And Liver Stiffness At The Same Frame. Able To Capture Multiple Frames In One Breath Hold. Virtual Convex Provides A Convex Field Of View Should Be Compatible To Spatial Compounding Available On All Linear And Sector Transducers Speckle Reduction Imaging High Definition Speckle Reduction Imaging Compatible With Side-by-side Dual-view Display Compatible With All Linear, Convex And Sector Transducers Compatible With B-mode, Color, Contrast Agent And 3d/4d Imaging Pre And Post Processing Panoramic Imaging Allows A Real-time Representation Of Long Anatomical Areas (e.g.patellar Tendon), Can Scan Up To 60 Cm Length Home Page Collection Of User’s Favorite Parameters From Measurement/comments/body Patterns Programmable Buttons Measurement For B/m/doppler User Defined Annotation For Selected Exam Category Continuous Optimization Delivers Continuously Optimized Images With Incredible Uniformity From Near To Far Field Artificial Intilligence (ai) Based Features System Capable That The User To Identify A Lesion In Breast, Thyroid Or Liver Lesion And On One Click, The Ultrasound Will Automatically Trace The Lesion System Capable To Automatically Measure The Fetal Biometry. Can Be Turned On And Off. An Ai Based Software That Automatically Determines The Location Of Vessels Both For Color Doppler And Pulsed Wave (pw) Mode. System Familiarization With The Color Preset For Abdominal Ultrasound. Automatic Measurement Of Kidney For Both Left And Right. Breast Measurement Package A Dedicated Breast-specific Measurement Package That Allows User To Make Labeling, Measuring And Describing Lesion Easy Leverage The Bi-rads Lexicon Criteria/assessment Organizes Multiple Measurements Into A Convenient Worksheet Thyroid Measurement Package Thyroid-specific Measurement Package Enables Labeling, Measuring And Describing Nodules, Lymph Nodes And Parathyroids Multiple Measurements Can Be Organized Into A Convenient Worksheet And Sends Results Via Dicom Sr Auto Intima Media Thickness (imt) Automated Method Of Measuring The Intima Media Thickness Of The Common Carotid Artery (cca) Or Internal Carotid Artery (ica) From Multiple Samples Across A User Defined Length. Photo Assistant Photograph Relevant Anatomy And Include Photos With The Clinical Images Provides Value Context For Documentation And Comparison After A Procedure Utilizes Tablet Or Phone Remote App With The Use Of Android Phone Or Tablet, The Ultrasound System Can Be Utilized Using Major Keys Like Major Modes, Freeze/print, Cursor And Etc Fusion Imaging The System Must Support A Technique That Fuses Two Different Imaging Modalities. For Hepatic Interventions, Real-time Ultrasound (us) Should Be Capable Of Being Fused With Other Imaging Modalities, Including Ct, Mri, And Pet/ct. Convex, Microconvex And Linear Probe To Have An Integrated Gps Tracker When Using The Fusion Feature. Improved Speckle Reduction Imaging Acquire Extraordinary Images Across A Broad Range Of Patients, With Incredible Uniformity From Near- To Far-field And The Penetration Power To Manage High-bmi Patients Efficiently. Micro Vascular Imaging Detects Slow Flow And Small Vessels With New Clutter Filtering, And Can Use Together With The 3d Like Feature Blood Flow. Start Protocol Automatically Select Category, Probe, Preset, Or Scan Assistant From Worklist Exam Description Learn The Category, Probe, Preset, And Scan Assistant Based On Exam Description 3d/4d Ultrasound Three-dimensional Image And Provide An Even Clear Image Of The Baby. Enhanced 3d Image A Skin Like Appearance Of A 3d/4d Image To Better Asses The Structure Of A Fetus. 3d/4d Image Rendering Automate Render Line Placement In 3d/4d Imaging, Enabling Clinicians To Easily Acquire Surface-rendered Images. Probes Convex Probe Application: Abdomen, Ob/gyn, Pediatric, Peripheral Vascular, General Musculoskeletal Bandwidth: 1.0 – 6.0 Mhz Number Of Elements: At Least 192 Field Of View (max.): 80° Cardiac/ Sector Probe Application: Adult Cardiac, Pediatric Cardiac, Adult Cephalic, Abdominal Imaging Bandwidth: 1.0 - 5.0 Mhz Number Of Elements: At Least 288 Field Of View (max.) : 120° Wireless Probe, Convex And Linear Convex Applications: Abdomen, Ob, Peripheral Vascular, General Musculoskeletal, Superficial Musculoskeletal, Cardiac And Pleural Bandwidth: 2 - 5 Mhz Number Of Elements: At Least 128 Field Of View (max.): 67° Linear Applications: Peripheral Vascular, Thyroid, Scrotal, Breast, General Musculoskeletal, Superficial Musculoskeletal, Pediatric Cephalic And Pleural Bandwidth: 3 - 12 Mhz Number Of Elements: At Least 192 Field Of View (max.): 38 Mm Linear Probe 1. Applications: Abdomen, Peripheral Vascular, Neonatal, Pediatric, Neonatal Transcranial, General Musculoskeletal, Superficial Musculoskeletal And Small Parts Inculding Breast, Thyroid And Scrotal 2. Bandwidth: 4.0 – 16.0 Mhz 3. Number Of Elements: At Least 1008 4. Field Of View (max.): 50 Mm Endocavitary Probe 1. Applications: Ob/gyn, Urology 2. Bandwidth 3.0 – 10.0 Mhz 3. Number Of Elements: At Least 192 4. Field Of View (max.): 180° Convex Volume Probe 1. Application: Abdomen, Ob/gyn, Pediatric, Neonatal 2. Bandwidth: 2.0 - 8.0 Mhz 3. Number Of Elements: At Least 192 4. Field Of View (max.): 80° Endocavitary Volume Probe 1. Application: Ob/gyn, Urology 2. Bandwidth: 3.0 - 10.0 Mhz 3. Number Of Elements: At Least 192 4. Field Of View (max.): 180° Vendor Shall Warrant That The Product Supplied Shall Meet The Published Specifications. Vendor Shall Provide (5) Years Warranty For Equipment Covering 1 Probe From 2nd Year To 5th Year Upon Acceptance By End User/s. Vendor Agrees To Provide Free Of Charge All Parts And Labour Necessary To Repair Each Of The Equipment Purchased During The Period Covered By The Warranty And Replacement Of Any Item/s And/or Part/s Found To Be Defective In Material Or Workmanship Under Normal Use. Equipment Shall Be Delivered Complete With All Cabling, Connectors, And All Other Accessories Necessary For Full Operation Of The Equipment, Where Applicable. Vendor Must Certify That All Products Quoted Must Be In Current Production And Publicly Available As Of The Date Of This Tender. Unproven Future Products Shall Not Be Accepted. All Desired Features Listed Must Be In Current Production, Installed And In Use At The Time Of Quote/bid. Conducts Bi-annnual Preventive Maintenance And Calibration With Corresponding Certificates And Stickers Attached To The Unit. Vendor Must Respond With Technical Support Staff, Either Remotely Within Two (2) Hours Or In-person Where Applicable, Within At Least Twenty-four (24) Hours Upon Notification Of End-user; Must Perform Corrective Maintenance Within A Maximum Of Fourteen (14) Days Upon Notification Of End-user; Equipment Must Meet All Currently Applicable Safety Standards, Local And International Where Applicable. Vendor May Include Post-warranty Comprehensive Preventive Maintenance Program Proposal For The Next 3-4 Years And Must Also Indicate Cost Estimated For Major Spare Part/s. Any And All Components Not Manufactured By The Vendor/primary Manufacturer Shall Be Listed As Such With Name/address/contact Information Of The Manufacturer Supplied. Vendor Shall Provide Automatic Voltage Regulator (avr) And Uninterrupted Power Supply (ups) To Back Up The System. Equipment Shall Be Delivered With At Least Two (2) Copy Of All Service Manuals And At Least Two (2) Copy Of All User Manuals. Certification From The Manufacturer That The Units Are Brand New And Not With Any Issues Or Defect. Vendor Shall Confirm And Certify In Writing That Parts And Labor Will Be Available For The Quoted Equipment For Not Less Than Five (5) Years After The Warranty Period. Vendor Shall Provide Comprehensive Training Of Users In Operation, Basic And Advance Maintenance Shall Be Provided With Certificates, Vendor Shall Agree To Provide Factory Or Principal Manufacturer Training And/or Certification For At Least Two (2) In-house Biomedical Technician Or Engineer And End User. Principal's/manufacturer's Product Portfolio Must Have Been Present In The Local Market For The Past Ten (10) Years. Equipment Must Be Manufactured By A Known And Reputable Company With Certificate Of Iso 9001:2015 And Iso 13485:2016 Or Its Equivalent. Progress Billing And Payment May Be Availed By The Winning Bidder As Follows, Otherwise, Full Payment Is Due At The Completion Of The Project And Requirements: 15% Upon Delivery At Site; 30% Upon Complete Installation, And 55% Upon Completion Of Project And/or Acceptance Of End-user. Completion Period For Delivery Must Not Exceed 120 Calendar Days And Succeeding Installation Must Not Exceed 120 Calendar Days. Any Deviation From This Limit Requires Prior Approval By The Head Of The Procuring Entity (hope) And Only Applies During Extenuating Circumstances. -------------------------------------------------------------------------------------------------------- 4 1 Lot Flexible Endoscopy Video Processor High Definition Video Outputs: Digital Visual Interface, Serial Digital Interface, Video Graphics Array Standard Video Outputs: S-video, Composite Video Baseband Signal Hd Video Recording: Built-in Workstation, Data Management & Report Editing After Procedure Can Access Data Management, Report Editing, Image Capture And Hd Video Recording Hard Disk: At Least 500gb Internal Capacity Power Requirement: 220-240 V, 60 Hz Chromoendoscopy Modes: Spectral Focused Imaging, Versatile Intelligent Staining Digital Zoom: 1.4x, 1.6x, 1.8x Color Adjustment: Red, Blue, Chroma, ±15 Levels Patient Data: At Least 10000 Records Lightsource Main Lamp: At Least 4 Light Emitting Diode Lamps With Average Working Hours Of At Least 10,000 Hours With Lifetime Indicator Light Control: Manual And Auto Adjust Air Pump: Off, Low, Mid, High Hot Plugging With Spectral Focused Imaging, Versatile Intelligent Staining With White Light Mode Power Requirement: 220-240 V, 60 Hz Monitor Medical Grade Light Emitting Diode Monitor With At Least 26 Inches Size Resolution: At Least Full Hd 1080p Visual Angle: Horizontal 178° / Vertical 178° Video Signal Input : Digital Visual Interface X1, Video Graphics Array X1, Video X1, Serial Digital Interface X1 Video Signal Output : Digital Visual Interface & Serial Digital Interface Power Requirement: 220-240 V, 60 Hz Trolley With Master Switch And Centralized Power Control With At Least Four (4) Layer Racks With Scope Holders With Built In Automatic Voltage Regulator Gastroscope Depth Of View (mm): 3-100 Field Of View: At Least 140° Distal End Diameter (mm): At Least 9.3 Bending Section Diameter (mm): At Least 9.3 Instrument Channel Diameter (mm): At Least 2.8 Angulations: At Least Up:210°; Down:90°; Left:100°; Right:100° Working Length (mm): At Least 1050 Total Length (mm): At Least 1350 Inclusion Of Distal End Cap Colonoscope Depth Of View (mm): 3-100 Field Of View: At Least 140° Distal End Diameter (mm): At Least 12 Bending Section Diameter (mm): At Least 12.5 Instrument Channel Diameter (mm): At Least 3.8 Angulations: At Least Up:180°; Down:180°; Left:160°; Right:160° Working Length (mm): At Least 1350 Total Length (mm): At Least 1700 Inclusion Of Distal End Cap Particulars Vendor Shall Warrant That The Product Supplied Shall Meet The Published Specifications. Vendor Shall Provide No Less Than Five (5) Years Warranty On Each Of The Equipment For Spare Parts And Service Upon Acceptance By End User/s. Vendor Agrees To Provide Free Of Charge All Parts And Labour Necessary To Repair Each Of The Equipment Purchased During The Period Covered By The Warranty And Replacement Of Any Item/s And/or Part/s Found To Be Defective In Material Or Workmanship Under Normal Use. Equipment Shall Be Delivered Complete With All Cabling, Connectors, And All Other Accessories Necessary For Full Operation Of The Equipment, Where Applicable. Vendor Must Certify That All Products Quoted Must Be In Current Production And Publicly Available As Of The Date Of This Tender. Unproven Future Products Shall Not Be Accepted. All Desired Features Listed Must Be In Current Production, Installed And In Use At The Time Of Quote/bid. Conducts Bi-annual Preventive Maintenance And Calibration With Corresponding Certificates And Stickers Attached To The Unit. Vendor Must Respond With Technical Support Staff, Either Remotely (2 Hours) Or In-person Where Applicable, Within At Least Twenty-four (24) Hours Upon Notification Of End-user; Must Perform Corrective Maintenance Within A Maximum Of Fourteen (14) Days Upon Notification Of End-user. Equipment Must Meet All Currently Applicable Safety Standards, Local And International Where Applicable. Vendor May Include Post-warranty Comprehensive Preventive Maintenance Program Proposal For The Next 3-4 Years And Must Also Indicate Cost Estimated For Major Spare Part/s. Any And All Components Not Manufactured By The Vendor/primary Manufacturer Shall Be Listed As Such With Name/address/contact Information Of The Manufacturer Supplied. Vendor Shall Provide Automatic Voltage Regulator (avr) And Uninterrupted Power Supply (ups) To Back Up The System . Equipment Shall Be Delivered With At Least Two (2) Copy Of All Service Manuals And At Least Two (2) Copy Of All User Manuals. Certification From The Manufacturer That The Units Are Brand New And Not With Any Issues Or Defect. Vendor Shall Confirm And Certify In Writing That Parts And Labor Will Be Available For The Quoted Equipment For Not Less Than Five (5) Years After The Warranty Period. Vendor Shall Provide Comprehensive Training Of Users In Operation, Basic And Advance Maintenance Shall Be Provided With Certificates, Vendor Shall Agree To Provide Factory Or Principal Manufacturer Training And/or Certification For At Least Two (2) In-house Biomedical Technician Or Engineer And/or End User. Principal's/manufacturer's Product Portfolio Must Have Been Present In The Local Market For The Past Ten (10) Years. Equipment Must Be Manufactured By A Known And Reputable Company With Certificate Of Iso 9001:2015 And/or Iso 13485:2016 Or Its Equivalent. Progress Billing And Payment May Be Availed By The Winning Bidder As Follows, Otherwise, Full Payment Is Due At The Completion Of The Project And Requirements: 15% Upon Delivery At Site; 30% Upon Complete Installation, And 55% Upon Completion Of Project And/or Acceptance Of End-user. Completion Period For Delivery Must Not Exceed 120 Calendar Days And Succeeding Installation Must Not Exceed 120 Calendar Days. Any Deviation From This Limit Requires Prior Approval By The Head Of The Procuring Entity (hope) And Only Applies During Extenuating Circumstances.

Austria-feldkirch: Construction Work For Buildings Relating To Health

Details: Description Technical Specifications Engagement Of A Mice Organizer/event Management Service Provider I. Project Title : Dot Annual Yearend Briefing 2024 Component/set-up : Live Onsite Attendance Of 220 Target Participants Implementation Date : 10 December 2024 (depending On Availability Of The Secretary) Venue : Metro Manila (tba Hotel) Concept : Formal Business Procurement : Mice Organizer/ Events Management Company Estimated Cost : Php 422,984.03 Source Of Funds : Opaa Augmented Wfp 2024 Attachments : Cost Basis Ii. Background Tourism’s Role In Economic Resurgence And Sustained Recovery Could Not Be Overemphasized. No Less Than Our President Ferdinand “bongbong” Marcos, Jr. Highlighted Tourism’s Resilient And Reliable Contribution To Sustained Growth In His Recent State Of The Nation Address. According To Him, Tourism Has Historically Provided Livelihood And Employment Opportunities To Filipinos. Given The Importance Placed By Our President To Tourism, We See The High Value And Critical Importance Of Striving For Success In Promoting Tourism To Establish It As A Hallmark Of The Current Administration, And Most Importantly, A Source Of National Pride For Our People. Philippine Economic Managers Have Identified Tourism As The Second Top Driver Of The Philippine Economy In The First Half Of The Current Year. This, Despite Global Tourism Recovery To Pre-pandemic Levels Remains Unrealized According To The United Nations World Tourism Organization. Our President’s Vision For The Philippine Tourism Industry Is Clear: To Establish A Sector Anchored In The Richness Of Filipino Culture, Heritage, And Identity, Making It Competitive On The Global Stage. Together, Through Meaningful Collaboration And Innovation, We Can Transform The Philippines Into A Tourism Powerhouse In Asia, Ensuring Lasting Economic And Social Benefits For All That Will Give More Reasons To Love The Philippines! Iii. Project Description To Maximize The Dot’s Media Exposure And Ensure That Its Public Image Remains Positive, The Opaa Has Been Organizing A Yearend Briefing. Held Annually For The Past Three Years Prior To The Pandemic. This Gathering Of Invited Members Of The National Media And Stakeholders Is Part Of Its Extensive Information And Awareness Drive Program To Position The Department’s Works In Various Media Platforms. The Dot Annual Yearend Media Briefing And Appreciation Reception Aims To Give, First And Foremost, The Tourism Secretary, As Well As Other Key Officials Of The Department The Opportunity To Engage Our Media Partners And Influencers For Their Sustained Efforts In The Promotion Of Philippine Tourism, While Addressing Some Of The Pressing Issues Related To Policy Directions, Targets And Accomplishments Of The Department For The Concluding Year. Sought To Attend Are The Dot-accredited Members Of The National Media And Influencers/ Tourism-beat Reporters, Lifestyle, Travel Editors, Columnists, And News-beat Journalists From Broadsheets, Travel Magazines, Radio, Tv And Social Media. Top Officials Of The Department And Heads Of The Communications Department Of Allied Agencies And Stakeholders Are Also Enjoined To Attend The Event For Networking Purposes. Iv. Project Objectives • Enlist Commitment And Support From The Members Of The National Media In All Department Initiatives, Programs And Directions; • Contribute To Advancing The Vision Of President Bongbong Marcos For A Revitalized Tourism Sector That Heralds The Filipino Brand And Contributes Greatly To The Philippines’ Economic Resurgence. • Engage Members Of Media To Continuously Generate Favorable Publicity For The Department. • Forge An Eloquent Relationship Between And Among Media Platforms. • Engage Public And Private Partnership In Tourism Development And Propagation Of The Culture Of Tourism. V. Gender And Development Objectives ● Promote Equal Opportunities For Men And Women To Receive Recognition As Indispensable Players In The Tourism Industry. Vi. Legal Basis  Republic Act 9593 Or The Tourism Act Of 2009 Mandates The Department Of Tourism (dot) To Encourage Activities And Programs Which Promote Tourism Awareness, Preserve The Country’s Diverse Cultures And Heritage, And Instill A Sense Of History And A Culture Of Tourism Among The Youth And The Populace; Vii. Scope Of Work/deliverables/requirements For Supplier A. Mice Organizer/event Management Service Provider  Production Management - Assist The Dot In The Conceptualization, Management, And Implementation Of The Events Styling And Entertainment Repertoire Plan Which Consists Of The Following:  Emcee/host O To Introduce The Guest Of Honor, Each Segment Of The Program, And Entertainment O Mc/host Should Be Either Male Or Female Duo Who Has Experience In International/ National Events And/or Tv Presenting Experience O Mc/host Must Speak Fluent English And Filipino O Mc/host Should Be Available For Rehearsal 3 Hours Prior To The Event  Entertainment O The Event Requires A Minimum Of 3 Different Entertainment Acts To Perform In Between Segments (beginning, Middle And End) For Approximately 5 Minutes O Entertainers May Include But Are Not Limited To Singers, Performers, Or An Orchestra, And Preferably Those Who Have Performed Before An International Audience In Keeping With The Overall Conceptual Approach And As Approved By Dot. O Entertainers Must Be Available 3 Hours Before The Event For Briefing And Rehearsal. O Artists To Bring Their Equipment And During Rehearsal Connect With The Av Team To Set Up What Is Required. O Entertainment Will Be Subject To Dot’s Final Approval  Music To Be Provided In The Following Instances: O Lunch Reception And Entry Into The Ballroom At The Start Of The Ceremony. O Background Lounge Music To Be Played Throughout The Ceremony When The Lunch Commences, Music Should Be Played In Between Transitions. O Dot To Approve The Choice Of Music To Play If Necessary.  Event Management Team Who Shall Coordinate, And Oversee The Light, Sound, Audio-visual, Scenery, Technical Requirements, Staging, Choreography, And Other Elements And Requirements Of The Overall Show. The Event Management Company Shall Source The Appropriate Artist, Technical Practitioners, Etc. Required To Implement The Overall Program Scenario For The Event Which Should Include But Not Be Limited To The Following: O Event Coordinator O Content Writer O Set And Stage Designer O Creative Artwork Specialist O Technical Director O Production Manager O Venue Stylist Note: Submit Together With The Technical Bid, The List And Portfolio Of Proposed Entertainment Acts, Mc/host.  Physical And Technical Requirements Overall Venue Decor/execution And Construction For The Abovementioned Event To Include But Not Limited To: A. Lunch Reception 1. Minimum Of Two (2) 6x42” Plasma Screens (landscape) On Stands Which Are Usb Compatible Or Laptops If No Usb Port Is Available. 2. Plasma Screens Will Show The Dot Videos On A Loop Throughout The Event. 3. Official Photo Walls And Media Booth Areas Are Often Placed In The Cocktail Area. 4. High Cocktail Tables With Decoration (1x Table To Be Used By Organization Staff For Registration And X Number Of Tables With Rise To Be Used For The Corporate Giveaways) 5. Red Carpet And Stanchions B. Stage Design 1. The Main Stage Must Be Large Enough To Accommodate Panoramic Led Walls (similar To Events By The Presidential Communications Office). 2. Must Also Allow A Maximum Number Of Tables In The Ballroom Or Area. 3. 3 Sets Of Stage Stairs; Large Middle Set Front Of The Stage, Backstage Left And Backstage Right. 4. Edges Or Stairs To Be Marked With Tape Or Similar For Health And Safety. 5. Stage Set-up, Subject To Adjustments Of Led Size, Depending On The Final Venue: Option 1 Stage Set-up: 3x Led Screens (one Center Stage And Two On Either Side). Screen Size Depends On Stage Design And The Size Of The Ballroom Or Event Area. All Screens Must Be Rigged And Framed By A Structure Surrounded By Neat Black Cloth Or Similar. Option 2 Stage Set-up: 1x Large Led Screen Which Can Be Divided Into Sub-screens. Stage Size Fit To Scale Of Ballroom Or Event Area. • • C. Printed Branding 1. Podium - To Be Supplied By Venue Or Av (1x Podium If 1 Mc). Preferably A Digital Podium For Us To Design A Cover Podium To Be Boxed In As Per Image [insert Photo]. The Podium Must Always Be Flat And/or Have A Lip To Avoid Folder Slipping. D. Photo Walls 2x Photo Walls Usually W 8m X H 24m, But Subject To Change Depending On The Size Of Space Available. Please Provide The Dimensions According To Location. Can Be Placed In Cocktail/ Pre-function Area, When Guests Arrive Or At The Adjacent Side In The Dining Area If Sufficient Space Or Immediately Outside The Event Area. Production Team To Build A Suitable Frame To Finish The Look. Both Walls Must Be Well Lit. E. 360 Photo And Video Booth Or To Be Set Up Near The Photo Walls Or At The Cocktail Area F. Invitational, Confirmation, Admin Work. Assist Opaa In The Conceptualization, - Management And Implementation Of All E-invites And Rsvp. - Drafting Of Invitation Content, Printing (including Onsite), Organization, Management And Execution Of Online Invitation And Related Communication (e-invitations, E-posters, Save The Date And On-the-day Poster, Confirmation, Certificate Of Attendance (if Required) Note: All Printed Materials Must Be Suitable For Photography, I.e Should Not Reflect Much Light As To Allow For Logos To Stand Out And Better Quality. These Also Need To Be Hung Against A Frame (ideally Plywood) So That The Print Can Be Fixed To A Rigid Board Surface So There Is No Creasing. We Advise All Printed Materials To Be Printed On Cloth Or Matt Lamination To Prevent Glare From Camera Flashes. The Graphics For All The Above Will Be Designed By The Opaa Team And Emailed To The Awarded Emc For Print And Installation. All Printed Branding Such As Photo Walls And Media Booths Are To Have Black Carpeted Platforms At Approximately 15cm In Height, Width To Be Approximately 1 Meter, And Length Dependent On Size. These Are To Be Built And Installed By The Production Team. G. Provide A Venue For Alignment Meeting And/or Technical Run With The Complete Technical And Physical Requirements Mentioned Herein. H. Ballroom Decoration: Decoration Of The Ballroom Is Required To Be A High Standard To Fit In With The Caliber Of Attendees. Display Of Local Culture And Colors Is Encouraged. Round Table Banqueting Tables And Chairs (8 Pax) With Tablecloths, Runners, And Chair Covers, Finished With A Decorative Floral Arrangement Or Centerpiece. Each Table To Be Displayed With Table Number Stand Supplied By The Venue And A Branded Menu For Each Guest (opaa Will Finalize Sign Prior To Printing).  Provide The Necessary Equipment And Technical Team, Requirements For The Event, And Coordinate With The Technical Team Of The Venue (tba) For The Setup And Installation Of All Physical And Technical Requirements, Including, But Not Limited To The Following: 1. Equipment - 1x Roaming Videographer For The Lunch Reception And Around The Main Room For The Tables. - 1x Vision Mixer/switcher And Operator. This Mixer Enables A Switch Between Several Different Sources And Mixes So We Can Switch Between The Live Feed, Powerpoint Slides, And Videos. Playback Pro Should Be Used When Video Cueing And Playing - 2x Pre-view Monitors And 2x Laptops In The Audio-visual Booth. It Is Preferred That Lighting, Sound, And Av Engineers Are Seated Next To Each Other In The Same Technical Box - 1x Professional Video Camera And Operator To Film The Entire Ceremony. Please Ensure That These Cameras Are Manually Operated And Not On An Automatic Focus. Cameras Are To Also Supply A Live Feed To The Above-mentioned Projections Screens. Footage Of The Event Is To Be Given To Us Immediately After The Ceremony On A Hard Drive Which The Emc Will Supply. -3x Professional Cameras, Operators, And Handheld Microphones For The Media Interview Enclosure Which Is Off Stage And Next To The Photo Wall. These Video Interviews Will Feature On Youtube, Therefore Need To Be In The Following Format .mov/.mp4/.avi With A Resolution And Aspect Ratio Of 720p: 1280x720 (preferred) Or 1080p: 1920x1080. All Footage Is To Be Saved Immediately After The Event And Copied Onto The Hard Drive Supplied By The Event Organizers. They Are Not Required To Edit These Videos; Opaa Will Do This. Electricity Is Needed In This Area. A Videography Brief Will Be Given To Assigned Videographers On Event Day By An Organizing Representative -1x Professional Digital Photographer Dedicated To The Photo Wall Photographs To Be Downloaded To The Organizer's Staff Laptop At The End Of The Night. A Photography Brief Will Be Given On Event Day By An Organizing Representative. - Provide All The Necessary Cabling For The Entire Production And For All Recording To Be In Hd. 2. Lighting And Sound A. Lunch Reception: Microphone And Stand For Speeches And/or Announcements (pa System); Relaxed/mood Lighting B. Pa System - 2x Gooseneck Microphones At Each Podium (reduce To One If Only One Host) - 2x Handheld Microphones In The Tech Box For Voice-over Introductions And As A Backup (reduce To One Host) - Generic/warm Theatrical Lighting To Give General Cover For The Stage And Band Areas - All Lighting/sound Requirements Of Band/performers As Per Their Technical Riders - Speakers Are To Be Flown/hung From Trusses To Allow For Overall Sound. Not On The Floor At The Front Of The Stage Or On Stands Around The Room. - Lighting In The Audio-visual Booth Area -uplighting For 2x Photo Walls - Lighting For The Backstage Area 3. The Winning Bidder Will Coordinate With Opaa For The Final Program Scenario And Script. 4. Vehicle Hire For Two (2) Mini Vans Or One (1) Super Grandia Van For One (1) Day Within Metro Manila For 12-hour Use That Will Transfer Opaa Secretariat And All Equipment; Should Be Inclusive Of Driver, Gas And Parking Fees And Driver Fees 5. Produce And Execute The Shooting And Pre-recordings Of The Messages Of Key Officials Or Other Speakers’ Messages Should The Need Arise 6. Document In Video And Photo Formats Of The Event For Submission To The Following: A. Opaa: Raw Footage Of The Event Saved In An External Hard Drive To Be Provided By The Emc; The Opaa Team Will Be The One To Edit B. Opaa: 1 Same-day Edit (sde) Video To Be Presented During The Dinner And 1 Video With Highlights Of The Event (2-3minute) For Social Media Posting And All Raw Footage Saved In An External Hard Drive To Be Provided By The Emc 7. Final Dry Run/technical Check Of The Program Scenario To Be Presented For Final Approval Of Tpb Before The Event 9. Submit The End Report, Recordings Of The Activities, Videos, And Final Cut (2-3 Minute Video Highlights) To Opaa After The Event 8. Opaa Shall Have Full Ownership Of All The Data Gathered And Presented (both In Hard And Softcopy Files) From The Event 9. All Records Are Regarded As Confidential And Therefore Will Not Be Divulged To Any Third Party Without Prior Written Approval Of Opaa. The Tpb Has The Right To Request Sight Of, And Copies Of All Records Kept, On The Provision That The Company Is Given Reasonable Notice Of Such A Request 10. Ensure The Privacy And Security Of All Confidential, Privileged Personal Information, And/or Sensitive Information In Accordance With Republic Act No. 10173, Otherwise Known As The Data Privacy Act Of 2021 And Its Implementing Rules And Regulations 11. The Winning Bidder Should: A. Secure All Necessary Permits For Any Song And/or Videos Owned By 3rd Party; B. Provide All Logistical Requirements Of The Entertainers And Their Production Team 12. Assistance On Other Related Matters That May Not Have Been Included In This Document But Deemed Necessary By Either Party. Viii. Eligibility Requirements For The Mice Organizer/event Management Service Provider  Must Be A Professional Full Service Mice Organizer/event Management Services Provider Specializing In Handling/producing/organizing/staging National Level Full-packaged Corporate Events, Corporate Communications, Creating And Staging Physical, As Well As Hybrid Content, Program And Broadcast;  Duly Registered Philippine-based Company With Appropriate Government Agency;  With Significant Experience Working With Government And Private Sector In Tourism, Utilizing State Of The Art Equipment To Produce Premium Physical, As Well As Hybrid Quality Content, Program And Broadcast;  Highly Experienced In Producing Contents And Programs That Are Dynamic, Filipino-themed But Global Standard;  Highly Knowledgeable In Government Procurement Process And Procedure;  Must Be A Dot-accredited Mice Organizer, And Must Engage With Dot-accredited Supplier/s;  Must Be Accredited With The Philippine Government Electronic Procurement Systems (philgeps);  Must Provide A Breakdown Of Prices And Services Included In The Quotation Complete With E-vat And Other Government Taxes;  Amenable To Government Procedure Or Send-bill Arrangement And Preferably With Land Bank Of The Philippines Account;  With Lgu-registered Physical Office In Metro Manila. Ix. Legal/technical Requirements 1. Valid Mayor’s/business Permit 2. Philgeps Registration Number 3. Latest Income/business Tax Return 4. Original Or Certified True Copy Of Duly Notarized Omnibus Sworn Statement X. Payment Procedure Government Procedure And Subject To Appropriate Government Taxes Xi. Approved Budget For The Contract (abc): The Approved Budget For The Contract (abc) Is Four Hundred Twenty-two Thousand Pesos And Nine Hundred Eighty Four 03/100 Pesos Only (php422,984.03) Inclusive Of All Applicable Taxes And Fees. Xii. Submission Of Proposal 4f | Procurement Management Division Department Of Tourism Bldg., 351 Sen. Gil Puyat Avenue, Makati Cit For Inquiries: Approved By: Contact: Mr. Dee A. Mandigma Atty. Glenn Albert Ocampo +9664758757 Oic – Director, Opaa Damandigma@tourism.gov.ph, 3f | Office Of Public Affairs And Advocacy (opaa) Telephone Numbers: 8459-5200 Local 306

Details: Item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| inspection Of Supplies--fixed-price (aug 1996)|2||| time Of Delivery (june 1997)|20||||||||||||||||||||| stop-work Order (aug 1989)|1|| general Information-fob-destination|1|b| wide Area Workflow Payment Instructions (jan 2023)|16|combo||tbd|n00104|tbd|tbd|tbd|tbd|tbd|tbd|tbd|||||| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|wss| value Engineering (jun 2020)|3|||| equal Opportunity (sep 2016)|2||| small Business Subcontracting Plan (dod Contracts)- Basic (dec 2019)|2||| integrity Of Unit Prices (nov 2021)|1|| equal Opportunity For Veterans (jun 2020)|4||||| small Business Subcontracting Plan (sep 2023)|4||||| equal Opportunity For Workers With Disabilities (jun 2020)|2||| transportation Of Supplies By Sea (jan 2023)|2||| contractor Purchasing System Administration-basic (may 2014)|1|| authorized Deviations In Clauses (nov 2020)|2|federal Acquisition Regulation |chapter 1| requirements For Certified Cost Or Pricing Data And Data Other Than Certified Cost Or Pricing Data-modifications (nov 2021))|7|||||||| list Of Award Attachments|5|||||| alternate A, Annual Representations And Certifications (nov 2023)|13|||||||||||||| small Business Program Representations (feb 2024)|4||||| royalty Information (apr 1984)|1|| certification Regarding Knowledge Of Child Labor For Listed End Products(feb 2021))|4||||| annual Representations And Certifications (may 2024)|13|334412|750 Employees|||||||||||| requirements For Submission Of Proposals Via Electronic Media (jan 2018)|1|email Only| requirements For Certified Cost Or Pricing Data And Data Other Than Certified Cost Or Pricing Data (nov 2021))|7|||||||| type Of Contract (apr 1984)|1|ffp| alterations In Solicitation (apr 1984)|3|||| notice Of Priority Rating For National Defense, Emergency Perpardeness, And Enrgy Progam Use (april 2008))|2||x| requirements For Certified Cost Or Pricing Data And Data Other Than Certifiedcost Or Pricing Data (may 2024))|1|| the Reason For This Amendment Is The Add The Below Terms To This Solicitation / Resultant Contract: 1: The Government's Required Delivery Date (rdd) Is 31 December 2026 Or Earlier On All Deliveries. 2: The Following Term Applies To This Solicitation And Resultant Contract/order: "this Order �solicitation� Is Issued Under And Pursuant To The Provisions Of The Basic Ordering Agreement (boa). The Terms And Conditions Of The Boa Are Hereby Incorporated By Reference And, Except As Provided Herein By This Order �solicitation�, Remain In Full force And Effect. If Any Conflict Arises In The Terms Of This Order Versus The Terms In The Boa, The Terms Of The Boa Shall Apply." \ 1. Scope 1.1 This Contract/purchase Order Contains The Requirements For Manufacture And The Contract Quality Requirements For The Heater Assembly,rad . 2. Applicable Documents 2.1 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.1.1 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. 3. Requirements 3.1 Cage Code/reference Number Items - The Heater Assembly,rad Furnished Under This contract/purchase Order Shall Be The Design Represented By Cage Code(s) reference Number(s). Cage _______ Ref. No. ;53711 5188230; 3.2 Marking - This Item Shall Be Physically Identified In Accordance with ;mil-std-130, Rev N, 16 Nov 2012; . 3.3 Changes In Design, Material Servicing, Or Part Number - Except For A Code 1 Change, Which Shall Be Processed As Provided In The Code Statement Shown Below, No Substitution Of Items Shall Be Made Until The Navicp-mech Contracting Officer Has Notified And approval Has Been Given By Issuance Of A Written Change Order. When Any Change In Design, Material, Servicing Or Part Number Is Made To Replace Or Substitute Any Item To Be Furnished On This Contract/purchase Order, The Contractor Shall Furnish, For The substituting/replacement Item, A Drawing And An Explanation Of The Reason For The Change, Explaining The Reason Therefor. If Finished Detail Drawings Are Not Available, Shop Drawings In The Form Used By The Manufacturer Will Be Acceptable For Government evaluation. When Notifying The Procurement Contracting Officer Of The Reasons For Making Substitutions, The Type Of Change Shall Be Indicated By Code Number In Accordance With One Of The Following Statements: code 1: Part Number Change Only - If The Manufacturer's Part Number Indicated Thereon Has Changed, But The Parts Are Identical In All Respects, Supply The Item And Advise Navicp-mech Immediately Of The New Part Number. code 2: Assembly (or Set Or Kit) Not Furnished - Used Following Detail Parts. code 3: Part Not Furnished Separately - Use Assembly. code 4: Part Redesigned - Old And New Parts Are Completely Interchangeable. code 5: Part Redesigned - New Part Replaces Old. Old Part Cannot Replace New. code 6: Part Redesigned - Parts Not Interchangeable. 3.4 Soldering - The Requirements For Soldered Electrical And Electronic Assemblies Shall Conform To Ipc J-std-001, Class ;3; . 4. Quality Assurance 4.1 Responsibility For Inspection - Unless Otherwise Specified In The Contract/purchase Order, The Contractor Is Responsible For The Performance Of All Inspection Requirements As Specified Herein. Except As Otherwise Specified In The Contract/purchase Order, the Contractor May Use His Own Or Any Other Facilities Suitable For The Performance Of The Inspection Requirements Specified Herein, Unless Disapproved By The Government. The Government Reserves The Right To Perform Any Of The Inspections Set Forth In The specification Where Such Inspections Are Deemed Necessary To Assure Supplies And Services Conform To Prescribed Requirements. 4.2 Responsibility For Compliance - All Items Must Meet All Requirements Of This Contract/purchase Order. The Inspection Set Forth In This Specification Shall Become A Part Of The Contractor's Overall Inspection System Or Quality Program. The Absence Of Any inspection Requirements Shall Not Relieve The Contractor Of The Responsibility Of Assuring That All Products Or Supplies Submitted To The Government For Acceptance Comply With All Requirements Of The Contract/purchase Order. Sampling In Quality Conformance does Not Authorize Submission Of Known Defective Material, Either Indicated Or Actual, Not Does It Commit The Government To Acceptance Of Defective Material. 4.3 Records - Records Of All Inspection Work By The Contractor Shall Be Kept Complete And Available To The Government During The Performance Of Contract/purchase Order And For A Period Of 365 Calendar Days After Final Delivery Of Supplies. 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Shall Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. Most Specifications Can Obtained Directly From Http://quicksearch.dla.mil/ a. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documentsthat Are Required By Private Industry In Fulfillment Of Contractual Obligationsin Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. b. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. Theymay Be Obtained From The Publishers Of The Applicable Societies. c. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: commander, Indian Head Division, Naval Surface Warfare Center code 8410p, 101 Strauss Avenue indian Head, Md 20640-5035 d. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contractnumber, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. e. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: contracting Officer navsup-wss code 87321 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 f. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered Enue: commanding Officer navsup-wss code 009 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 g. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: commanding Officer navsup-wss code 1 Support Branch 700 Robbins Avenue philadelphia, Pa. 19111-5094 h. Interim Changes And Classified Specifications Must Be Obtained By Submitting A Request On Dd Form 1425 To Navsup-wss. 6.2 Notice To Distributors/offerors - Consideration For Award Of Contract Shall Be Given Only To Authorized Distributors Of The Original Manufacturer's Item Represented In This Solicitation. If You Desire To Be Considered As A Potential Source For Award Of this Contract, Proof Of Being An Authorized Distributor Shall Be Provided On Company Letterhead Signed By A Responsible Company Official And Sent With Your Offer To The Procurement Contracting Officer. 6.3 In Accordance With Opnavinst 5510.1 All Documents And Drawings Provided By The U.s. Navy To Perspective Contractors Must Include A "distribution Statement" To Inform The Contractor Of The Limits Of Distribution, And The Safeguarding Of The Information contained On Those Documents And Drawings. There Are 7 (seven) Seperate Distribution Statement Codes Used For Non-classified Documents And Drawings. The Definition For Each Is As Follows: a... Approved For Public Release; Distribution Is Unlimited. b... Distribution Authorized To Us Governments Agencies Only. c... Distribution Authorized To Us Government Agencies And Their Contractors. d... Distribution Authorized To Dod And Dod Contractors Only. e... Distribution Authorized To Dod Components Only. f... Further Distribution Only As Directed By Commander, Naval Sea Systems Command, Code 09t. x... Distribution Is Authorized To Us Government Agencies And Private Individuals Or Enterprises Eligible To Obtain Export Controlled Technical Data In Accordance With Opnavinst 5510.161. 1. Scope 1.1 This Contract/purchase Order Contains The Requirements For Manufacture And The Contract Quality Requirements For The Modulator . 2. Applicable Documents 2.1 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.1.1 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. 3. Requirements 3.1 Cage Code/reference Number Items - The Modulator Furnished Under This contract/purchase Order Shall Be The Design Represented By Cage Code(s) reference Number(s). Cage _______ Ref. No. ;53711 5336325; 3.2 Marking - This Item Shall Be Physically Identified In Accordance with ;mil-std-130, Rev N, 16 Nov 2012; . 3.3 Changes In Design, Material Servicing, Or Part Number - Except For A Code 1 Change, Which Shall Be Processed As Provided In The Code Statement Shown Below, No Substitution Of Items Shall Be Made Until The Navicp-mech Contracting Officer Has Notified And approval Has Been Given By Issuance Of A Written Change Order. When Any Change In Design, Material, Servicing Or Part Number Is Made To Replace Or Substitute Any Item To Be Furnished On This Contract/purchase Order, The Contractor Shall Furnish, For The substituting/replacement Item, A Drawing And An Explanation Of The Reason For The Change, Explaining The Reason Therefor. If Finished Detail Drawings Are Not Available, Shop Drawings In The Form Used By The Manufacturer Will Be Acceptable For Government evaluation. When Notifying The Procurement Contracting Officer Of The Reasons For Making Substitutions, The Type Of Change Shall Be Indicated By Code Number In Accordance With One Of The Following Statements: code 1: Part Number Change Only - If The Manufacturer's Part Number Indicated Thereon Has Changed, But The Parts Are Identical In All Respects, Supply The Item And Advise Navicp-mech Immediately Of The New Part Number. code 2: Assembly (or Set Or Kit) Not Furnished - Used Following Detail Parts. code 3: Part Not Furnished Separately - Use Assembly. code 4: Part Redesigned - Old And New Parts Are Completely Interchangeable. code 5: Part Redesigned - New Part Replaces Old. Old Part Cannot Replace New. code 6: Part Redesigned - Parts Not Interchangeable. 4. Quality Assurance 4.1 Responsibility For Inspection - Unless Otherwise Specified In The Contract/purchase Order, The Contractor Is Responsible For The Performance Of All Inspection Requirements As Specified Herein. Except As Otherwise Specified In The Contract/purchase Order, the Contractor May Use His Own Or Any Other Facilities Suitable For The Performance Of The Inspection Requirements Specified Herein, Unless Disapproved By The Government. The Government Reserves The Right To Perform Any Of The Inspections Set Forth In The specification Where Such Inspections Are Deemed Necessary To Assure Supplies And Services Conform To Prescribed Requirements. 4.2 Responsibility For Compliance - All Items Must Meet All Requirements Of This Contract/purchase Order. The Inspection Set Forth In This Specification Shall Become A Part Of The Contractor's Overall Inspection System Or Quality Program. The Absence Of Any inspection Requirements Shall Not Relieve The Contractor Of The Responsibility Of Assuring That All Products Or Supplies Submitted To The Government For Acceptance Comply With All Requirements Of The Contract/purchase Order. Sampling In Quality Conformance does Not Authorize Submission Of Known Defective Material, Either Indicated Or Actual, Not Does It Commit The Government To Acceptance Of Defective Material. 4.3 Records - Records Of All Inspection Work By The Contractor Shall Be Kept Complete And Available To The Government During The Performance Of Contract/purchase Order And For A Period Of 365 Calendar Days After Final Delivery Of Supplies. 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Shall Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. Most Specifications Can Obtained Directly From Http://quicksearch.dla.mil/ a. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documentsthat Are Required By Private Industry In Fulfillment Of Contractual Obligationsin Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. b. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. Theymay Be Obtained From The Publishers Of The Applicable Societies. c. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: commander, Indian Head Division, Naval Surface Warfare Center code 8410p, 101 Strauss Avenue indian Head, Md 20640-5035 d. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contractnumber, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. e. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: contracting Officer navsup-wss code 87321 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 f. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered Enue: commanding Officer navsup-wss code 009 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 g. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: commanding Officer navsup-wss code 1 Support Branch 700 Robbins Avenue philadelphia, Pa. 19111-5094 h. Interim Changes And Classified Specifications Must Be Obtained By Submitting A Request On Dd Form 1425 To Navsup-wss. 6.2 Notice To Distributors/offerors - Consideration For Award Of Contract Shall Be Given Only To Authorized Distributors Of The Original Manufacturer's Item Represented In This Solicitation. If You Desire To Be Considered As A Potential Source For Award Of this Contract, Proof Of Being An Authorized Distributor Shall Be Provided On Company Letterhead Signed By A Responsible Company Official And Sent With Your Offer To The Procurement Contracting Officer. 6.3 In Accordance With Opnavinst 5510.1 All Documents And Drawings Provided By The U.s. Navy To Perspective Contractors Must Include A "distribution Statement" To Inform The Contractor Of The Limits Of Distribution, And The Safeguarding Of The Information contained On Those Documents And Drawings. There Are 7 (seven) Seperate Distribution Statement Codes Used For Non-classified Documents And Drawings. The Definition For Each Is As Follows: a... Approved For Public Release; Distribution Is Unlimited. b... Distribution Authorized To Us Governments Agencies Only. c... Distribution Authorized To Us Government Agencies And Their Contractors. d... Distribution Authorized To Dod And Dod Contractors Only. e... Distribution Authorized To Dod Components Only. f... Further Distribution Only As Directed By Commander, Naval Sea Systems Command, Code 09t. x... Distribution Is Authorized To Us Government Agencies And Private Individuals Or Enterprises Eligible To Obtain Export Controlled Technical Data In Accordance With Opnavinst 5510.161. 1. Scope 1.1 This Contract/purchase Order Contains The Requirements For Manufacture And The Contract Quality Requirements For The Circuit Card Assemb . 2. Applicable Documents 2.1 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.1.1 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. 3. Requirements 3.1 Cage Code/reference Number Items - The Circuit Card Assemb Furnished Under This contract/purchase Order Shall Be The Design Represented By Cage Code(s) reference Number(s). Cage _______ Ref. No. ;53711 6166870; 3.2 Marking - This Item Shall Be Physically Identified In Accordance with ;mil-std-130, Rev N, 16 Nov 2012; . 3.3 Changes In Design, Material Servicing, Or Part Number - Except For A Code 1 Change, Which Shall Be Processed As Provided In The Code Statement Shown Below, No Substitution Of Items Shall Be Made Until The Navicp-mech Contracting Officer Has Notified And approval Has Been Given By Issuance Of A Written Change Order. When Any Change In Design, Material, Servicing Or Part Number Is Made To Replace Or Substitute Any Item To Be Furnished On This Contract/purchase Order, The Contractor Shall Furnish, For The substituting/replacement Item, A Drawing And An Explanation Of The Reason For The Change, Explaining The Reason Therefor. If Finished Detail Drawings Are Not Available, Shop Drawings In The Form Used By The Manufacturer Will Be Acceptable For Government evaluation. When Notifying The Procurement Contracting Officer Of The Reasons For Making Substitutions, The Type Of Change Shall Be Indicated By Code Number In Accordance With One Of The Following Statements: code 1: Part Number Change Only - If The Manufacturer's Part Number Indicated Thereon Has Changed, But The Parts Are Identical In All Respects, Supply The Item And Advise Navicp-mech Immediately Of The New Part Number. code 2: Assembly (or Set Or Kit) Not Furnished - Used Following Detail Parts. code 3: Part Not Furnished Separately - Use Assembly. code 4: Part Redesigned - Old And New Parts Are Completely Interchangeable. code 5: Part Redesigned - New Part Replaces Old. Old Part Cannot Replace New. code 6: Part Redesigned - Parts Not Interchangeable. 3.4 Electrostatic Discharge Control - The Contractor Shall Comply With The Electrostatic Discharge Control Requirements Established In Mil-std-1686. 3.5 Soldering - The Requirements For Soldered Electrical And Electronic Assemblies Shall Conform To Ipc J-std-001, Class ;3; . 4. Quality Assurance 4.1 Responsibility For Inspection - Unless Otherwise Specified In The Contract/purchase Order, The Contractor Is Responsible For The Performance Of All Inspection Requirements As Specified Herein. Except As Otherwise Specified In The Contract/purchase Order, the Contractor May Use His Own Or Any Other Facilities Suitable For The Performance Of The Inspection Requirements Specified Herein, Unless Disapproved By The Government. The Government Reserves The Right To Perform Any Of The Inspections Set Forth In The specification Where Such Inspections Are Deemed Necessary To Assure Supplies And Services Conform To Prescribed Requirements. 4.2 Responsibility For Compliance - All Items Must Meet All Requirements Of This Contract/purchase Order. The Inspection Set Forth In This Specification Shall Become A Part Of The Contractor's Overall Inspection System Or Quality Program. The Absence Of Any inspection Requirements Shall Not Relieve The Contractor Of The Responsibility Of Assuring That All Products Or Supplies Submitted To The Government For Acceptance Comply With All Requirements Of The Contract/purchase Order. Sampling In Quality Conformance does Not Authorize Submission Of Known Defective Material, Either Indicated Or Actual, Not Does It Commit The Government To Acceptance Of Defective Material. 4.3 Records - Records Of All Inspection Work By The Contractor Shall Be Kept Complete And Available To The Government During The Performance Of Contract/purchase Order And For A Period Of 365 Calendar Days After Final Delivery Of Supplies. 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Shall Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. Most Specifications Can Obtained Directly From Http://quicksearch.dla.mil/ a. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documentsthat Are Required By Private Industry In Fulfillment Of Contractual Obligationsin Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. b. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. Theymay Be Obtained From The Publishers Of The Applicable Societies. c. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: commander, Indian Head Division, Naval Surface Warfare Center code 8410p, 101 Strauss Avenue indian Head, Md 20640-5035 d. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contractnumber, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. e. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: contracting Officer navsup-wss code 87321 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 f. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered Enue: commanding Officer navsup-wss code 009 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 g. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: commanding Officer navsup-wss code 1 Support Branch 700 Robbins Avenue philadelphia, Pa. 19111-5094 h. Interim Changes And Classified Specifications Must Be Obtained By Submitting A Request On Dd Form 1425 To Navsup-wss. 6.2 Notice To Distributors/offerors - Consideration For Award Of Contract Shall Be Given Only To Authorized Distributors Of The Original Manufacturer's Item Represented In This Solicitation. If You Desire To Be Considered As A Potential Source For Award Of this Contract, Proof Of Being An Authorized Distributor Shall Be Provided On Company Letterhead Signed By A Responsible Company Official And Sent With Your Offer To The Procurement Contracting Officer. 6.3 In Accordance With Opnavinst 5510.1 All Documents And Drawings Provided By The U.s. Navy To Perspective Contractors Must Include A "distribution Statement" To Inform The Contractor Of The Limits Of Distribution, And The Safeguarding Of The Information contained On Those Documents And Drawings. There Are 7 (seven) Seperate Distribution Statement Codes Used For Non-classified Documents And Drawings. The Definition For Each Is As Follows: a... Approved For Public Release; Distribution Is Unlimited. b... Distribution Authorized To Us Governments Agencies Only. c... Distribution Authorized To Us Government Agencies And Their Contractors. d... Distribution Authorized To Dod And Dod Contractors Only. e... Distribution Authorized To Dod Components Only. f... Further Distribution Only As Directed By Commander, Naval Sea Systems Command, Code 09t. x... Distribution Is Authorized To Us Government Agencies And Private Individuals Or Enterprises Eligible To Obtain Export Controlled Technical Data In Accordance With Opnavinst 5510.161. 1. Scope 1.1 This Contract/purchase Order Contains The Requirements For Manufacture And The Contract Quality Requirements For The Circuit Card Assemb . 2. Applicable Documents 2.1 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.1.1 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. 3. Requirements 3.1 Cage Code/reference Number Items - The Circuit Card Assemb Furnished Under This contract/purchase Order Shall Be The Design Represented By Cage Code(s) reference Number(s). Cage _______ Ref. No. ;53711 5543728; 3.2 Marking - This Item Shall Be Physically Identified In Accordance with ;mil-std-130, Rev N, 16 Nov 2012; . 3.3 Changes In Design, Material Servicing, Or Part Number - Except For A Code 1 Change, Which Shall Be Processed As Provided In The Code Statement Shown Below, No Substitution Of Items Shall Be Made Until The Navicp-mech Contracting Officer Has Notified And approval Has Been Given By Issuance Of A Written Change Order. When Any Change In Design, Material, Servicing Or Part Number Is Made To Replace Or Substitute Any Item To Be Furnished On This Contract/purchase Order, The Contractor Shall Furnish, For The substituting/replacement Item, A Drawing And An Explanation Of The Reason For The Change, Explaining The Reason Therefor. If Finished Detail Drawings Are Not Available, Shop Drawings In The Form Used By The Manufacturer Will Be Acceptable For Government evaluation. When Notifying The Procurement Contracting Officer Of The Reasons For Making Substitutions, The Type Of Change Shall Be Indicated By Code Number In Accordance With One Of The Following Statements: code 1: Part Number Change Only - If The Manufacturer's Part Number Indicated Thereon Has Changed, But The Parts Are Identical In All Respects, Supply The Item And Advise Navicp-mech Immediately Of The New Part Number. code 2: Assembly (or Set Or Kit) Not Furnished - Used Following Detail Parts. code 3: Part Not Furnished Separately - Use Assembly. code 4: Part Redesigned - Old And New Parts Are Completely Interchangeable. code 5: Part Redesigned - New Part Replaces Old. Old Part Cannot Replace New. code 6: Part Redesigned - Parts Not Interchangeable. 4. Quality Assurance 4.1 Responsibility For Inspection - Unless Otherwise Specified In The Contract/purchase Order, The Contractor Is Responsible For The Performance Of All Inspection Requirements As Specified Herein. Except As Otherwise Specified In The Contract/purchase Order, the Contractor May Use His Own Or Any Other Facilities Suitable For The Performance Of The Inspection Requirements Specified Herein, Unless Disapproved By The Government. The Government Reserves The Right To Perform Any Of The Inspections Set Forth In The specification Where Such Inspections Are Deemed Necessary To Assure Supplies And Services Conform To Prescribed Requirements. 4.2 Responsibility For Compliance - All Items Must Meet All Requirements Of This Contract/purchase Order. The Inspection Set Forth In This Specification Shall Become A Part Of The Contractor's Overall Inspection System Or Quality Program. The Absence Of Any inspection Requirements Shall Not Relieve The Contractor Of The Responsibility Of Assuring That All Products Or Supplies Submitted To The Government For Acceptance Comply With All Requirements Of The Contract/purchase Order. Sampling In Quality Conformance does Not Authorize Submission Of Known Defective Material, Either Indicated Or Actual, Not Does It Commit The Government To Acceptance Of Defective Material. 4.3 Records - Records Of All Inspection Work By The Contractor Shall Be Kept Complete And Available To The Government During The Performance Of Contract/purchase Order And For A Period Of 365 Calendar Days After Final Delivery Of Supplies. 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Shall Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. Most Specifications Can Obtained Directly From Http://quicksearch.dla.mil/ a. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documentsthat Are Required By Private Industry In Fulfillment Of Contractual Obligationsin Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. b. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. Theymay Be Obtained From The Publishers Of The Applicable Societies. c. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: commander, Indian Head Division, Naval Surface Warfare Center code 8410p, 101 Strauss Avenue indian Head, Md 20640-5035 d. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contractnumber, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. e. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: contracting Officer navsup-wss code 87321 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 f. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered Enue: commanding Officer navsup-wss code 009 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 g. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: commanding Officer navsup-wss code 1 Support Branch 700 Robbins Avenue philadelphia, Pa. 19111-5094 h. Interim Changes And Classified Specifications Must Be Obtained By Submitting A Request On Dd Form 1425 To Navsup-wss. 6.2 In Accordance With Opnavinst 5510.1 All Documents And Drawings Provided By The U.s. Navy To Perspective Contractors Must Include A "distribution Statement" To Inform The Contractor Of The Limits Of Distribution, And The Safeguarding Of The Information contained On Those Documents And Drawings. There Are 7 (seven) Seperate Distribution Statement Codes Used For Non-classified Documents And Drawings. The Definition For Each Is As Follows: a... Approved For Public Release; Distribution Is Unlimited. b... Distribution Authorized To Us Governments Agencies Only. c... Distribution Authorized To Us Government Agencies And Their Contractors. d... Distribution Authorized To Dod And Dod Contractors Only. e... Distribution Authorized To Dod Components Only. f... Further Distribution Only As Directed By Commander, Naval Sea Systems Command, Code 09t. x... Distribution Is Authorized To Us Government Agencies And Private Individuals Or Enterprises Eligible To Obtain Export Controlled Technical Data In Accordance With Opnavinst 5510.161. 6.3 Notice To Distributors/offerors - Consideration For Award Of Contract Shall Be Given Only To Authorized Distributors Of The Original Manufacturer's Item Represented In This Solicitation. If You Desire To Be Considered As A Potential Source For Award Of this Contract, Proof Of Being An Authorized Distributor Shall Be Provided On Company Letterhead Signed By A Responsible Company Official And Sent With Your Offer To The Procurement Contracting Officer. 1. Scope 1.1 This Contract/purchase Order Contains The Requirements For Manufacture And The Contract Quality Requirements For The Supply,electric . 2. Applicable Documents 2.1 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.1.1 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. 3. Requirements 3.1 Cage Code/reference Number Items - The Supply,electric Furnished Under This contract/purchase Order Shall Be The Design Represented By Cage Code(s) reference Number(s). Cage _______ Ref. No. ;15090 6309885; 3.2 Marking - This Item Shall Be Physically Identified In Accordance with ;mil-std-130, Rev N, 16 Nov 2012; . 3.3 Changes In Design, Material Servicing, Or Part Number - Except For A Code 1 Change, Which Shall Be Processed As Provided In The Code Statement Shown Below, No Substitution Of Items Shall Be Made Until The Navicp-mech Contracting Officer Has Notified And approval Has Been Given By Issuance Of A Written Change Order. When Any Change In Design, Material, Servicing Or Part Number Is Made To Replace Or Substitute Any Item To Be Furnished On This Contract/purchase Order, The Contractor Shall Furnish, For The substituting/replacement Item, A Drawing And An Explanation Of The Reason For The Change, Explaining The Reason Therefor. If Finished Detail Drawings Are Not Available, Shop Drawings In The Form Used By The Manufacturer Will Be Acceptable For Government evaluation. When Notifying The Procurement Contracting Officer Of The Reasons For Making Substitutions, The Type Of Change Shall Be Indicated By Code Number In Accordance With One Of The Following Statements: code 1: Part Number Change Only - If The Manufacturer's Part Number Indicated Thereon Has Changed, But The Parts Are Identical In All Respects, Supply The Item And Advise Navicp-mech Immediately Of The New Part Number. code 2: Assembly (or Set Or Kit) Not Furnished - Used Following Detail Parts. code 3: Part Not Furnished Separately - Use Assembly. code 4: Part Redesigned - Old And New Parts Are Completely Interchangeable. code 5: Part Redesigned - New Part Replaces Old. Old Part Cannot Replace New. code 6: Part Redesigned - Parts Not Interchangeable. 4. Quality Assurance 4.1 Responsibility For Inspection - Unless Otherwise Specified In The Contract/purchase Order, The Contractor Is Responsible For The Performance Of All Inspection Requirements As Specified Herein. Except As Otherwise Specified In The Contract/purchase Order, the Contractor May Use His Own Or Any Other Facilities Suitable For The Performance Of The Inspection Requirements Specified Herein, Unless Disapproved By The Government. The Government Reserves The Right To Perform Any Of The Inspections Set Forth In The specification Where Such Inspections Are Deemed Necessary To Assure Supplies And Services Conform To Prescribed Requirements. 4.2 Responsibility For Compliance - All Items Must Meet All Requirements Of This Contract/purchase Order. The Inspection Set Forth In This Specification Shall Become A Part Of The Contractor's Overall Inspection System Or Quality Program. The Absence Of Any inspection Requirements Shall Not Relieve The Contractor Of The Responsibility Of Assuring That All Products Or Supplies Submitted To The Government For Acceptance Comply With All Requirements Of The Contract/purchase Order. Sampling In Quality Conformance does Not Authorize Submission Of Known Defective Material, Either Indicated Or Actual, Not Does It Commit The Government To Acceptance Of Defective Material. 4.3 Records - Records Of All Inspection Work By The Contractor Shall Be Kept Complete And Available To The Government During The Performance Of Contract/purchase Order And For A Period Of 365 Calendar Days After Final Delivery Of Supplies. 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Shall Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. Most Specifications Can Obtained Directly From Http://quicksearch.dla.mil/ a. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documentsthat Are Required By Private Industry In Fulfillment Of Contractual Obligationsin Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. b. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. Theymay Be Obtained From The Publishers Of The Applicable Societies. c. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: commander, Indian Head Division, Naval Surface Warfare Center code 8410p, 101 Strauss Avenue indian Head, Md 20640-5035 d. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contractnumber, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. e. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: contracting Officer navsup-wss code 87321 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 f. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered Enue: commanding Officer navsup-wss code 009 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 g. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: commanding Officer navsup-wss code 1 Support Branch 700 Robbins Avenue philadelphia, Pa. 19111-5094 h. Interim Changes And Classified Specifications Must Be Obtained By Submitting A Request On Dd Form 1425 To Navsup-wss. 6.2 In Accordance With Opnavinst 5510.1 All Documents And Drawings Provided By The U.s. Navy To Perspective Contractors Must Include A "distribution Statement" To Inform The Contractor Of The Limits Of Distribution, And The Safeguarding Of The Information contained On Those Documents And Drawings. There Are 7 (seven) Seperate Distribution Statement Codes Used For Non-classified Documents And Drawings. The Definition For Each Is As Follows: a... Approved For Public Release; Distribution Is Unlimited. b... Distribution Authorized To Us Governments Agencies Only. c... Distribution Authorized To Us Government Agencies And Their Contractors. d... Distribution Authorized To Dod And Dod Contractors Only. e... Distribution Authorized To Dod Components Only. f... Further Distribution Only As Directed By Commander, Naval Sea Systems Command, Code 09t. x... Distribution Is Authorized To Us Government Agencies And Private Individuals Or Enterprises Eligible To Obtain Export Controlled Technical Data In Accordance With Opnavinst 5510.161. 6.3 Notice To Distributors/offerors - Consideration For Award Of Contract Shall Be Given Only To Authorized Distributors Of The Original Manufacturer's Item Represented In This Solicitation. If You Desire To Be Considered As A Potential Source For Award Of this Contract, Proof Of Being An Authorized Distributor Shall Be Provided On Company Letterhead Signed By A Responsible Company Official And Sent With Your Offer To The Procurement Contracting Officer. 1. Scope 1.1 This Contract/purchase Order Contains The Requirements For Manufacture And The Contract Quality Requirements For The Radar Set . 2. Applicable Documents 2.1 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.1.1 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. 3. Requirements 3.1 Cage Code/reference Number Items - The Radar Set Furnished Under This contract/purchase Order Shall Be The Design Represented By Cage Code(s) reference Number(s). Cage _______ Ref. No. ;53711 6170342; 3.2 Marking - This Item Shall Be Physically Identified In Accordance with ;mil-std-130, Rev N, 16 Nov 2012; . 3.3 Changes In Design, Material Servicing, Or Part Number - Except For A Code 1 Change, Which Shall Be Processed As Provided In The Code Statement Shown Below, No Substitution Of Items Shall Be Made Until The Navicp-mech Contracting Officer Has Notified And approval Has Been Given By Issuance Of A Written Change Order. When Any Change In Design, Material, Servicing Or Part Number Is Made To Replace Or Substitute Any Item To Be Furnished On This Contract/purchase Order, The Contractor Shall Furnish, For The substituting/replacement Item, A Drawing And An Explanation Of The Reason For The Change, Explaining The Reason Therefor. If Finished Detail Drawings Are Not Available, Shop Drawings In The Form Used By The Manufacturer Will Be Acceptable For Government evaluation. When Notifying The Procurement Contracting Officer Of The Reasons For Making Substitutions, The Type Of Change Shall Be Indicated By Code Number In Accordance With One Of The Following Statements: code 1: Part Number Change Only - If The Manufacturer's Part Number Indicated Thereon Has Changed, But The Parts Are Identical In All Respects, Supply The Item And Advise Navicp-mech Immediately Of The New Part Number. code 2: Assembly (or Set Or Kit) Not Furnished - Used Following Detail Parts. code 3: Part Not Furnished Separately - Use Assembly. code 4: Part Redesigned - Old And New Parts Are Completely Interchangeable. code 5: Part Redesigned - New Part Replaces Old. Old Part Cannot Replace New. code 6: Part Redesigned - Parts Not Interchangeable. 4. Quality Assurance 4.1 Responsibility For Inspection - Unless Otherwise Specified In The Contract/purchase Order, The Contractor Is Responsible For The Performance Of All Inspection Requirements As Specified Herein. Except As Otherwise Specified In The Contract/purchase Order, the Contractor May Use His Own Or Any Other Facilities Suitable For The Performance Of The Inspection Requirements Specified Herein, Unless Disapproved By The Government. The Government Reserves The Right To Perform Any Of The Inspections Set Forth In The specification Where Such Inspections Are Deemed Necessary To Assure Supplies And Services Conform To Prescribed Requirements. 4.2 Responsibility For Compliance - All Items Must Meet All Requirements Of This Contract/purchase Order. The Inspection Set Forth In This Specification Shall Become A Part Of The Contractor's Overall Inspection System Or Quality Program. The Absence Of Any inspection Requirements Shall Not Relieve The Contractor Of The Responsibility Of Assuring That All Products Or Supplies Submitted To The Government For Acceptance Comply With All Requirements Of The Contract/purchase Order. Sampling In Quality Conformance does Not Authorize Submission Of Known Defective Material, Either Indicated Or Actual, Not Does It Commit The Government To Acceptance Of Defective Material. 4.3 Records - Records Of All Inspection Work By The Contractor Shall Be Kept Complete And Available To The Government During The Performance Of Contract/purchase Order And For A Period Of 365 Calendar Days After Final Delivery Of Supplies. 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Shall Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. Most Specifications Can Obtained Directly From Http://quicksearch.dla.mil/ a. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documentsthat Are Required By Private Industry In Fulfillment Of Contractual Obligationsin Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. b. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. Theymay Be Obtained From The Publishers Of The Applicable Societies. c. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: commander, Indian Head Division, Naval Surface Warfare Center code 8410p, 101 Strauss Avenue indian Head, Md 20640-5035 d. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contractnumber, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. e. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: contracting Officer navsup-wss code 87321 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 f. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered Enue: commanding Officer navsup-wss code 009 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 g. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: commanding Officer navsup-wss code 1 Support Branch 700 Robbins Avenue philadelphia, Pa. 19111-5094 h. Interim Changes And Classified Specifications Must Be Obtained By Submitting A Request On Dd Form 1425 To Navsup-wss. 6.2 Notice To Distributors/offerors - Consideration For Award Of Contract Shall Be Given Only To Authorized Distributors Of The Original Manufacturer's Item Represented In This Solicitation. If You Desire To Be Considered As A Potential Source For Award Of this Contract, Proof Of Being An Authorized Distributor Shall Be Provided On Company Letterhead Signed By A Responsible Company Official And Sent With Your Offer To The Procurement Contracting Officer. 6.3 In Accordance With Opnavinst 5510.1 All Documents And Drawings Provided By The U.s. Navy To Perspective Contractors Must Include A "distribution Statement" To Inform The Contractor Of The Limits Of Distribution, And The Safeguarding Of The Information contained On Those Documents And Drawings. There Are 7 (seven) Seperate Distribution Statement Codes Used For Non-classified Documents And Drawings. The Definition For Each Is As Follows: a... Approved For Public Release; Distribution Is Unlimited. b... Distribution Authorized To Us Governments Agencies Only. c... Distribution Authorized To Us Government Agencies And Their Contractors. d... Distribution Authorized To Dod And Dod Contractors Only. e... Distribution Authorized To Dod Components Only. f... Further Distribution Only As Directed By Commander, Naval Sea Systems Command, Code 09t. x... Distribution Is Authorized To Us Government Agencies And Private Individuals Or Enterprises Eligible To Obtain Export Controlled Technical Data In Accordance With Opnavinst 5510.161. 1. Scope 1.1 This Contract/purchase Order Contains The Requirements For Manufacture And The Contract Quality Requirements For The Circuit Card Assemb . 2. Applicable Documents 2.1 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.1.1 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. 3. Requirements 3.1 Cage Code/reference Number Items - The Circuit Card Assemb Furnished Under This contract/purchase Order Shall Be The Design Represented By Cage Code(s) reference Number(s). Cage _______ Ref. No. ;53711 6570452; 3.2 Marking - This Item Shall Be Physically Identified In Accordance with ;mil-std-130, Rev N, 16 Nov 2012; . 3.3 Changes In Design, Material Servicing, Or Part Number - Except For A Code 1 Change, Which Shall Be Processed As Provided In The Code Statement Shown Below, No Substitution Of Items Shall Be Made Until The Navicp-mech Contracting Officer Has Notified And approval Has Been Given By Issuance Of A Written Change Order. When Any Change In Design, Material, Servicing Or Part Number Is Made To Replace Or Substitute Any Item To Be Furnished On This Contract/purchase Order, The Contractor Shall Furnish, For The substituting/replacement Item, A Drawing And An Explanation Of The Reason For The Change, Explaining The Reason Therefor. If Finished Detail Drawings Are Not Available, Shop Drawings In The Form Used By The Manufacturer Will Be Acceptable For Government evaluation. When Notifying The Procurement Contracting Officer Of The Reasons For Making Substitutions, The Type Of Change Shall Be Indicated By Code Number In Accordance With One Of The Following Statements: code 1: Part Number Change Only - If The Manufacturer's Part Number Indicated Thereon Has Changed, But The Parts Are Identical In All Respects, Supply The Item And Advise Navicp-mech Immediately Of The New Part Number. code 2: Assembly (or Set Or Kit) Not Furnished - Used Following Detail Parts. code 3: Part Not Furnished Separately - Use Assembly. code 4: Part Redesigned - Old And New Parts Are Completely Interchangeable. code 5: Part Redesigned - New Part Replaces Old. Old Part Cannot Replace New. code 6: Part Redesigned - Parts Not Interchangeable. 4. Quality Assurance 4.1 Responsibility For Inspection - Unless Otherwise Specified In The Contract/purchase Order, The Contractor Is Responsible For The Performance Of All Inspection Requirements As Specified Herein. Except As Otherwise Specified In The Contract/purchase Order, the Contractor May Use His Own Or Any Other Facilities Suitable For The Performance Of The Inspection Requirements Specified Herein, Unless Disapproved By The Government. The Government Reserves The Right To Perform Any Of The Inspections Set Forth In The specification Where Such Inspections Are Deemed Necessary To Assure Supplies And Services Conform To Prescribed Requirements. 4.2 Responsibility For Compliance - All Items Must Meet All Requirements Of This Contract/purchase Order. The Inspection Set Forth In This Specification Shall Become A Part Of The Contractor's Overall Inspection System Or Quality Program. The Absence Of Any inspection Requirements Shall Not Relieve The Contractor Of The Responsibility Of Assuring That All Products Or Supplies Submitted To The Government For Acceptance Comply With All Requirements Of The Contract/purchase Order. Sampling In Quality Conformance does Not Authorize Submission Of Known Defective Material, Either Indicated Or Actual, Not Does It Commit The Government To Acceptance Of Defective Material. 4.3 Records - Records Of All Inspection Work By The Contractor Shall Be Kept Complete And Available To The Government During The Performance Of Contract/purchase Order And For A Period Of 365 Calendar Days After Final Delivery Of Supplies. 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Shall Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. Most Specifications Can Obtained Directly From Http://quicksearch.dla.mil/ a. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documentsthat Are Required By Private Industry In Fulfillment Of Contractual Obligationsin Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. b. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. Theymay Be Obtained From The Publishers Of The Applicable Societies. c. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: commander, Indian Head Division, Naval Surface Warfare Center code 8410p, 101 Strauss Avenue indian Head, Md 20640-5035 d. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contractnumber, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. e. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: contracting Officer navsup-wss code 87321 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 f. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered Enue: commanding Officer navsup-wss code 009 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 g. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: commanding Officer navsup-wss code 1 Support Branch 700 Robbins Avenue philadelphia, Pa. 19111-5094 h. Interim Changes And Classified Specifications Must Be Obtained By Submitting A Request On Dd Form 1425 To Navsup-wss. 6.2 Notice To Distributors/offerors - Consideration For Award Of Contract Shall Be Given Only To Authorized Distributors Of The Original Manufacturer's Item Represented In This Solicitation. If You Desire To Be Considered As A Potential Source For Award Of this Contract, Proof Of Being An Authorized Distributor Shall Be Provided On Company Letterhead Signed By A Responsible Company Official And Sent With Your Offer To The Procurement Contracting Officer. 6.3 In Accordance With Opnavinst 5510.1 All Documents And Drawings Provided By The U.s. Navy To Perspective Contractors Must Include A "distribution Statement" To Inform The Contractor Of The Limits Of Distribution, And The Safeguarding Of The Information contained On Those Documents And Drawings. There Are 7 (seven) Seperate Distribution Statement Codes Used For Non-classified Documents And Drawings. The Definition For Each Is As Follows: a... Approved For Public Release; Distribution Is Unlimited. b... Distribution Authorized To Us Governments Agencies Only. c... Distribution Authorized To Us Government Agencies And Their Contractors. d... Distribution Authorized To Dod And Dod Contractors Only. e... Distribution Authorized To Dod Components Only. f... Further Distribution Only As Directed By Commander, Naval Sea Systems Command, Code 09t. x... Distribution Is Authorized To Us Government Agencies And Private Individuals Or Enterprises Eligible To Obtain Export Controlled Technical Data In Accordance With Opnavinst 5510.161. 1. Scope 1.1 This Contract/purchase Order Contains The Requirements For Manufacture And The Contract Quality Requirements For The Cable Assembly,spec . 2. Applicable Documents 2.1 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.1.1 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. 3. Requirements 3.1 Cage Code/reference Number Items - The Cable Assembly,spec Furnished Under This contract/purchase Order Shall Be The Design Represented By Cage Code(s) reference Number(s). Cage _______ Ref. No. ;53711 7044468; 3.2 Marking - This Item Shall Be Physically Identified In Accordance with ;mil-std-130, Rev N, 16 Nov 2012; . 3.3 Changes In Design, Material Servicing, Or Part Number - Except For A Code 1 Change, Which Shall Be Processed As Provided In The Code Statement Shown Below, No Substitution Of Items Shall Be Made Until The Navicp-mech Contracting Officer Has Notified And approval Has Been Given By Issuance Of A Written Change Order. When Any Change In Design, Material, Servicing Or Part Number Is Made To Replace Or Substitute Any Item To Be Furnished On This Contract/purchase Order, The Contractor Shall Furnish, For The substituting/replacement Item, A Drawing And An Explanation Of The Reason For The Change, Explaining The Reason Therefor. If Finished Detail Drawings Are Not Available, Shop Drawings In The Form Used By The Manufacturer Will Be Acceptable For Government evaluation. When Notifying The Procurement Contracting Officer Of The Reasons For Making Substitutions, The Type Of Change Shall Be Indicated By Code Number In Accordance With One Of The Following Statements: code 1: Part Number Change Only - If The Manufacturer's Part Number Indicated Thereon Has Changed, But The Parts Are Identical In All Respects, Supply The Item And Advise Navicp-mech Immediately Of The New Part Number. code 2: Assembly (or Set Or Kit) Not Furnished - Used Following Detail Parts. code 3: Part Not Furnished Separately - Use Assembly. code 4: Part Redesigned - Old And New Parts Are Completely Interchangeable. code 5: Part Redesigned - New Part Replaces Old. Old Part Cannot Replace New. code 6: Part Redesigned - Parts Not Interchangeable. 4. Quality Assurance 4.1 Responsibility For Inspection - Unless Otherwise Specified In The Contract/purchase Order, The Contractor Is Responsible For The Performance Of All Inspection Requirements As Specified Herein. Except As Otherwise Specified In The Contract/purchase Order, the Contractor May Use His Own Or Any Other Facilities Suitable For The Performance Of The Inspection Requirements Specified Herein, Unless Disapproved By The Government. The Government Reserves The Right To Perform Any Of The Inspections Set Forth In The specification Where Such Inspections Are Deemed Necessary To Assure Supplies And Services Conform To Prescribed Requirements. 4.2 Responsibility For Compliance - All Items Must Meet All Requirements Of This Contract/purchase Order. The Inspection Set Forth In This Specification Shall Become A Part Of The Contractor's Overall Inspection System Or Quality Program. The Absence Of Any inspection Requirements Shall Not Relieve The Contractor Of The Responsibility Of Assuring That All Products Or Supplies Submitted To The Government For Acceptance Comply With All Requirements Of The Contract/purchase Order. Sampling In Quality Conformance does Not Authorize Submission Of Known Defective Material, Either Indicated Or Actual, Not Does It Commit The Government To Acceptance Of Defective Material. 4.3 Records - Records Of All Inspection Work By The Contractor Shall Be Kept Complete And Available To The Government During The Performance Of Contract/purchase Order And For A Period Of 365 Calendar Days After Final Delivery Of Supplies. 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Shall Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Ot

Details: Description Invitation To Bid Pb-020-2024 Supply And Delivery Of Technical Vocational Livelihood (tvl) Equipment Packages For Public Senior High Schools 1. The Department Of Education, Schools Division Of Ilocos Sur Through The Republic Act No. 11975 – Fy 2024 Gaa (sub-allotment Release Order No. Roi-24-1175) Intends To Apply The Sum Of Two Million Three Hundred Thirty-six Thousand Two Hundred Eighty Pesos (p2,336,280.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Project Supply And Delivery Of Vocational Livelihood (tvl) Equipment Packages For Public Senior High Schools. Bids Received Higher Than The Abc Shall Be Automatically Rejected At Bid Opening. Item No. Project Description Qty. Unit Unit Cost Abc For The Project (in Php) Tvl Tools & Equipment (bread And Pastry Production) 1 Air Compressor With Airbrush Cake Decorating Set (medium) Pc 1 2,414.00 2,414.00 2 Beater (standard) Pc 6 287.00 1,722.00 3 Board, Chopping, 6 Color Rectangular Material: Plastic (polypropylene), Food Grade Board Size: Length: 38 Cm (minimum) Width: 30 Cm (minimum) Thickness: 1.27 Cm (minimum) Color-coded For Use With Different Types Of Food, Blue, Red, Yellow, Green, Brown And White, Preferably Packed In Set Set 6 920.00 5,520.00 4 Boiler, Double (material: Stainless Steel Thickness: 1/16 Inch (1.5 Mm) (minimum) Lid Material: Glass Riveted Handle On Both Side Diameter: 9 1/2 Inches (minimum) Total Height: 9.4 Inches (minimum) Inset Bottom Diameter: 9 Inches (minimum) Inset Top Diameter: 9 Inches (minimum) Capacity: 2 Liters (minimum) Must Be A Set Which Includes One (1) Saucepan, One (1) Boiler, And One (1) Lid With Stainless Steel Handle And Smooth Surfaces With No Sharp Edges) Set 1 1,955.00 1,955.00 5 Bowl, Mixing (6 Pcs/set) Pc 12 2,415.00 28,980.00 6 Cake Pans, Round #4, #6, #8, #10, #12, #14, #16 Pc 6 1,725.00 10,350.00 7 Cake Stand, With Tier (type: Cake Stand With Tier, Food Grade Body Shape: Circular With 3 Tiers Material: Hard Plastic, Polypropylene, 4 Mm Thick The Tier Consists Of The Following Sizes: Tier 1: 18 Cm Diameter (minimum) Tier 2: 25 Cm Diameter (minimum) Tier 3: 30 Cm Diameter (minimum) Column Diameter: 20 To 30 Mm (solid) Distance Between Tiers: 15 Cm Over-all Length: 30 Cm (minimum) Pc 6 1,725.00 10,350.00 8 Cake Turn Table (body Shape: Circular Material: Cast Aluminum Plate. And Cast-iron Base Upper Plate: 30 Cm Diameter (minimum) And 1.4 Cm Thickness (minimum) Base Dimensions: 18 Cm (minimum); 1.4 Cm Thickness (minimum) Total Height: 10 Cm To 15 Cm) Pc 3 1,265.00 3,795.00 9 Coupler (tubular Material: Hard Plastic, Polypropylene, Any Bright Color Height: 3cm (minimum) Top Diameter: 1.27 Cm (minimum) Bottom Diameter: 2.54 Cm (minimum) Preferably With Storage Case) Pc 13 207.00 2,691.00 10 Cup, Measuring (for Solid) The Standard 4 Measuring Cup Sizes Are: 1 Cup, 1/2 Cup, 1/3 Cup And 1/4 Cup Set 12 977.00 11,724.00 11 Cup, Measuring, 250 Ml For Liquid Pc 12 632.00 7,584.00 12 Cup, Measuring, 500ml For Liquid Pc 12 747.00 8,964.00 13 Cutter, Dough (stainless Steel Straight Blade With Stainless Steel Handle Blade Dimension: Length: 15 Cm X Width: 11 Cm X Thickness: 1.2mm(minimum) Handle Dimension: Length: 15 Cm X Diameter: 3 Cm (minimum) Preferably With Packing Case Food Grade And Dishwasher Safe Design Allows Item To Be Hung For Storage) Pc 1 402.00 402.00 14 Cutter, Pie (medium) Pc 6 460.00 2,760.00 15 Flour Sifter, Hand Cranked (standard) Round Shape Material: Stainless Steel Dimension: Diameter: 133.3 Mm (minimum) X Height: 165 Mm (minimum) Thickness: 0.79 Mm (minimum) (body) And Constructed With Stainless Steel Wire Mesh #30 Bottom Volume Markings Should Be Seen Inside And Outside Of The Sifter Capacity: 5 Cups (1.18 Liter) Pc 6 747.00 4,482.00 16 Grater 4 Sided (s) Pc 6 402.00 2,412.00 17 Knife, Kitchen (s) Pc 6 747.00 4,482.00 18 Knife, Pallet (s) Pc 6 573.00 3,438.00 19 Ladle, 3 0z Pc 6 241.00 1,446.00 20 Loaf Pan Big Pc 6 862.00 5,172.00 21 Loaf Pan, Medium Pc 6 517.00 3,102.00 22 Loaf Pan, Small Pc 6 126.00 756.00 23 Muffin Pan, Big Pc 6 448.00 2,688.00 24 Muffin Pan, Medium Pc 6 414.00 2,484.00 25 Muffin Pan, Small Pc 6 322.00 1,932.00 26 Pie Pan, 10 Inches Diameter Pc 6 517.00 3,102.00 27 Pie Pan, # 6, #8, #10 Set 6 1,265.00 7,590.00 28 Pillars, Cake (big) Pc 6 517.00 3,102.00 29 Piping Bag (100 Pcs Per Pack) (m) Pack 25 241.00 6,025.00 30 Rectangular Pan, (7” X 11”) Pc 4 263.00 1,052.00 31 Rolling Pins (3cm X 10 Cm) Pc 12 402.00 4,824.00 32 Rubber Scraper (m) Pc 12 207.00 2,484.00 33 Sauce Pan 22cm Pc 13 632.00 8,216.00 34 Sheet Pan (m) Pc 15 517.00 7,755.00 35 Spoon, Measuring (plastic) ¼ Teaspoon, ½ Teaspoon, 1 Teaspoon, And 1 Tablespoon Set 26 287.00 7,462.00 36 Spoon, Wooden (s) Pc 15 92.00 1,380.00 37 Strainer Stainless (m) Pc 15 212.00 3,180.00 38 Tip, Decorating X 24 (small To Large) Set 23 632.00 14,536.00 39 Weighing Scale, 10 Kgs (digital) Pc 13 2,875.00 37,375.00 40 Weighing Scale,5 Kgs, (digital) Pc 13 1,265.00 16,445.00 41 Wire Whisk, Medium Ballon Material: Heavy Duty Stainless Steel Dimensions (l X W): 31.8 Cm X 7.6 Cm (minimum) Handle Length: 12 Cm (minimum) With Hanging Loop No. Of Wires: 8 Wires Wire Diameter: 2 Mm (minimum) Preferably With A Packing Case Pc 13 286.00 3,718.00 Sub Total 259,851.00 Tvl Tools & Equipment (computer System Servicing) 42 Allen Wrench (set Of 10 Pieces: 1.5 Mm, 2 Mm, 2.5 Mm, 3 Mm, 4 Mm, 5 Mm, 5.5 Mm, 6 Mm, 8 Mm, 10 Mm;) Set 50 450.00 22,500.00 43 Anti-static Device (anti-static Wrist Strap) Adjustable And Elastic Wristband With Integrated 1 Mega Ohm Resistor Pc 50 250.00 12,500.00 44 Combination Pliers, 8" Pc 50 350.00 17,500.00 45 Crimping Tool (rj 11/45) Pc 52 450.00 23,400.00 46 Desoldering Pump (plastic Or Aluminum Housing) Pc 52 250.00 13,000.00 47 Electric Drill, Portable (rated Voltage: 220 / 240 Volts, Ac 60 Hz Power In Watts: 550 To 650 Watts) Pc 4 4,000.50 16,002.00 48 External Optical Drive Cd-r Dvd-r (interface: Usb 3.0 Or Better; 2. Compatibility: Windows 2000, Xp, Vista, 7, 8, 10, Apple Mac, Linux Or Better; 3. Read Speed: At Least 8x Dvd, At Least 24x Cd; 4. Write Speed: At Least 4x Dvd, At Least 16x Cd) Pc 6 1,000.00 6,000.00 49 Flash Drive (1tb) Pc 52 850.00 44,200.00 50 Flashlight, Head-mounted (rechargeable) Minimum Of 160 Lumens; Beam Distance: Minimum Of 150 Meters; Includes 220 V Ac Charger/power Adaptor (or Equivalent) Pc 50 550.00 27,500.00 51 Hub / Switch ( Standards And Protocols: Ieee 802.3, Ieee802.3u, Ieee802.3x Csma/cd Interface: 8 10/100mbps Ports, Auto-negotiation, Auto-mdi/mdix External Power Supply Adapter: 100-240vac,50/60hz Fanless Data Rates: 10/100mbps At Half Duplex; 20/200mbps At Full Duplex Led Indicator: Power, 1, 2, 3, 4, 5, 6, 7, 8 Dimensions: 5.3 X 3.1 X 0.9 In. (134.5 X 79 X 22.5mm) (approx.) Pc 42 2,000.00 84,000.00 52 Lan Cable Tester (1. Package Contents: 8-port 10/100mbps Desktop Switch, Power) Pc 50 252.00 12,600.00 53 Long Nose Pliers, 8" Pc 50 200.00 10,000.00 54 Multimeter, Digital (auto Range/data Hold/back Light/ Led Lamp/diode Test/triode Test/continuity/ Overload Protection/low Battery Indication/auto Power Off/short-circuit Protection. Display: True Rms, 6000 Counts, 3 5/6 Digits Overload Display: Display Ol Dc Voltage:600mv/6v/60v/600v(0.5%+3), 1000v (0.5%+3) Ac Voltage:600mv/6v/60v/600v/750v (0.8%+5) Dc Current:600a/6000a/60ma/600ma/10a (1.2%+3) Ac Current:600a/6000a/60ma/600ma/10a (1.5%+3) Resistance:600/6k/60k/600k/(1.0%+3) ,6m/60m (1.5%+3) Capacitance: 10nf/100nf/1000nf/10uf/100uf/1000uf (4.0%+5), 10mf/100mf(5.0%+5 Pc 40 800.00 32,000.00 55 Patch Panel (48 Ports) Cat6 Cable Material: Abs Plastic Application: Utp(unshielded) Certification: Rohs, Iso, Ce Rj45 Connector: Two Rows (1-24 Ports & 25-48 Ports) Transport Package: 1pcs/box Pc 50 2,500.00 125,000.00 56 Pc Video Camera (5.0 Mega Pixel Web Camera, Usb-type; With Microphone For Laptop And Desktop Pc Use; Resolution: At Least 640 X 480; Support Windows Xp/7/8/equivalent Mac Os Or Later Versions) Pc 20 500.00 10,000.00 57 Phillip’s Screwdriver, 8" Insulated Pc 50 250.00 12,500.00 58 Precision Screwdriver Set (1 Set Comes With The Following: 3 X Phillips Tip No. 00, 0, And 1; 6 X Standard Tip No. 1, 1.2, 1.4, 1.8, 2.4, And 3.0; 1 X Awl; 1 X Magnet; Plastic Storage Case;) Set 50 500.00 25,000.00 59 Soldering Iron, 60w Pc 50 250.00 12,500.00 60 Standard Screwdriver (flat), 8” Insulated Pc 50 250.00 12,500.00 61 Uninterruptible Power Supply (ups) Battery (included): Lithium-ion Battery Or Maintenance-free Sealed Lead-acid Battery With Suspended Electrolyte: Leakproof Voltage: Nominal Input Voltage: 230v, 50/60hz Output Power Capacity: 600va (minimum) Pc 40 4,000.00 160,000.00 62 Usb External Hd 1tb Pc 10 3,500.00 35,000.00 63 Wire Stripper (10 Awg To 24 Awg Length: 7 Inches (minimum) Pc 54 250.00 13,500.00 64 Wireless Access Point ( Access Point Dual Band Wi-fi Band / Data Transfer Rate: 867 Mbps At 5 Ghz And 300 Mbps At 2.4ghz Band Operating Modes: Access Point (ap), Bridge, Wireless Client, Repeater Interface: One 10/100m Ethernet Port(rj45), Support Passive Poe Power On/off Button And Reset Button Comes With External Power Supply: 5vdc-12vdc / 0.5a-1.0a Dimensions ( L X W X D ): (76-191 ×47-125 ×30-68mm) Pc 50 1,500.00 75,000.00 Subtotal 802,202.00 Tvl Tools & Equipment (cookery) 65 Apple Corer (material: Stainless Steel Total Length: 18 Cm (minimum) Handle Material: Hard Plastic, Polypropylene Handle Dimension: Length-10 Cm X Diameter-2 Cm (minimum) Blade Size: Length-8cm X Diameter-2 Cm (minimum) Pc 10 444.00 4,440.00 66 Bain Marie, Table ( Type: Bain Marie Table (food Warmer) Body Shape: Rectangular Material: 304 Stainless Steel, 0.8 Mm Thick (minimum) Dimensions: Length-1500 Mm X Width-700mm X Height-800 Mm (minimum) Power Source: Voltage: 220 Volts - 230 Volts, 50 Hz/ 60hz With Royal Cord 1.5 Meter Long With Attachment Standard Type A Male Plug Or Provide Plug Adopter 10a/220v) Pc 4 20,700.00 82,800.00 67 Blender, Electric (material Housing: Plastic (polypropylene) Jar Height: 25 Cm To 28 Cm Jar Thickness: 4 Mm To 8 Mm Heat Resistant Glass Jar With Cover Source Voltage: 220volts/ 240volts, 50hz/ 60hz With Power Cord 1.5 Meter Long With Attachment Of Standard Type A Male Plug Or Provide Plug Adopter 10a/220v. Power Wattage: 300 To 700 Watts Blade: Stainless Steel, 3 To 4 Metal Blades) Pc 4 2,875.00 11,500.00 68 Board, Chopping/cutting, Plastic (board Size: Length: 15 Inches (minimum) Width: 12 Inches (minimum) Thickness: 0.5 Inch (minimum) Pc 20 289.00 5,780.00 69 Boiler, Double (stainless Steel Thickness: 1/16 Inch (1.5 Mm) (minimum) Lid Material: Glass Riveted Handle On Both Sides Diameter: 9 1/2 Inches (minimum) Total Height: 9.4 Inches (minimum) Inset Bottom Diameter: 9 Inches (minimum) Inset Top Diameter: 9 Inches (minimum) Capacity: 3 Liters (minimum) Pc 2 2,128.00 4,256.00 70 Braising Pan, Medium Pc 10 1,494.00 14,940.00 71 Can Opener (stainless Steel Dimension: Length-21 Cm X Width 10 Cm X Depth:2.5cm (minimum) Pc 4 242.00 968.00 72 Casserole, Medium Pc 10 702.00 7,020.00 73 Casserole, Small Pc 12 669.00 8,028.00 74 Colander, Medium Pc 10 340.00 3,400.00 75 Colander, Small Pc 10 303.00 3,030.00 76 Cup, Measuring (for Solid) (cup, 1/2 Cup, 1/3 Cup, 1/4 Cup And 1/8 Cup.) Set 10 518.00 5,180.00 77 Dispenser, Paper Towel (abs Plastic Dimensions: Length =260 Mm X Width =100 Mm X Height = 211 Mm (minimum) Capacity: 200 Paper Paper Size: Length-20 Cm X Width- 8 Cm (approximate) Pc 10 403.00 4,030.00 78 Stand Fan, Electric (metal, Plastic Size/diameter: 18 Inches Power Rating: 70 Watts (minimum), 220/240 Vac, 50 / 60 Hz, Single Phase Rotation Angle: 90 Degrees Base: Stable, 16 Inches Diameter (approx.) Pc 5 1,495.00 7,475.00 79 Fire Extinguisher (with Contents) Capacity 5 - 6 Kgs Rechargeable Cylinder Metal Working Pressure Of Cylinder: 400 Psi Pc 1 2,875.00 2,875.00 80 Fish Poacher, Medium (oval Pot For Poaching Material: Stainless Steel, 0.64 Mm Thick Dimensions (l X W X D): 45 Cm X 15 Cm X 12cm (minimum) Handle Material: Stainless Steel Riveted Looped Handles On Both Side, 7 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm) Pc 10 2,076.00 20,760.00 81 Fork, Carving (square Shape Prong Prong Material: High Carbon Stainless Steel Overall Length: 30 Cm (minimum) Blade Dimension: Length- 15 Cm X Width- 0.5 Cm X Thickness- 0.3 Cm (minimum) Number Of Prongs: 2 Prongs Comes With Square - Shaped Prongs And Pointed Tips Abs Plastic Triple-riveted Handle) Pc 10 593.00 5,930.00 82 Fork, Kitchen (body Shape: Standard Material: Stainless Steel Dimension: Length - 32 Cm X Width- 3.5 Cm (minimum) Fork Size: Length: 8 Cm X Width -3.5 Cm (minimum) Handle: Abs Plastic Number Of Tines: 2 Tines With Tapered End Pc 10 248.00 2,480.00 83 Frying Pan, Large Pc 10 438.00 4,380.00 84 Frying Pan, Medium Pc 10 334.00 3,340.00 85 Frying Pan, Small Pc 12 296.00 3,552.00 86 Funnel, S/s, Medium Pc 10 242.00 2,420.00 87 Funnel, S/s, Small Pc 10 207.00 2,070.00 88 Garbage Bin (material: Hard Plastic, Polypropylene Dimension: Diameter-26 Cm X Height-47 Cm (minimum) Capacity: 4 Gallons (minimum) Removable Dome Shape Lid With Spring Return Swivel) Pc 4 863.00 3,452.00 89 Glass Rack (body Shape: Square Material: Polypropylene Plastic Overall Dimensions: Length - 19 1/2 Inches X Width - 19 1/2 Inches X Height - 4 Inches (minimum) Compartments: Full-size 25 Individual Compartment Glass Rack Compartment Dimensions: Length - 3 ½ Inches X Width - 3 1/2 Inches X Height - 4 Inches (minimum) Easy Grip Handles Molded Into All Four Sides Preferably With A Packing Case) Pc 12 817.00 9,804.00 90 Ice Cream Scooper (medium) Pc 2 288.00 576.00 91 Knife, Boning (28 Cm (minimum) Blade: Length-15 Cm X Width- 3 Cm (minimum), Pointed Tip Cutting Edge Angle From Tip To The Heel Is 13 To 14 Degrees Handle Length: 12 Cm (minimum) Handle Material: Hard Plastic Handle With Rivets) Pc 10 564.00 5,640.00 92 Knife, Chef (chef's Knife Body Shape: Flat Materials: Stainless Steel Overall Length: 30 Cm (minimum) Blade Size: Length - 20 Cm X Width-4 Cm (minimum) Blade Thickness: 2.5 Mm (minimum) Pc 10 449.00 4,490.00 93 Knife, Cleaver (forged Stainless Steel Heavy Duty Blade Length: 17 Cm (minimum) Overall Length: 30 Cm (minimum Cutting Edge: Straight Handle Material: Ergonomic Wood Handle With Triple Rivets) Pc 10 552.00 5,520.00 94 Knife, Oyster (stainless Steel Blade Dimension: Length - 7 Cm (minimum) X Width - 2 Cm (minimum) Blade Thickness: 2 Mm (minimum) Handle Material: Smooth Wooded Handle Rounded Handle Size: Length-10 Cm X Diameter- 3.5 Cm (minimum) Total Length (from The Tip Of The Handle Up To Tip Of The Blade) :17 Cm (minimum) Pc 10 547.00 5,470.00 95 Light, Emergency (metal, Anti-rust Coated Duration Time (2 Heads): 5 Hours (minimum) Automatically Light Up During Power Outage Overcharge And Over- Discharge Protection Built - In Ac Charger, Power Cord Plug To Adapt Type A Outlet (or Providing 5a Minimum Plug Adapter Is An Option) Battery Test Switch - External Safety Fuse Head: White Led 1w (minimum) 3.5 " Dome Reflector ) Pc 1 2,013.00 2,013.00 96 Meat Slicer (die Cast Aluminum Alloy And Body Painted Dimensions: Width-40.5 Cm X Depth- 45.7 Cm X Height- 38 Cm (minimum) Stainless Steel Rotary Blade Diameter: 190 Mm (minimum) Power Source: 220 Volts-230 Volts, 60 Hz With Power Cord 1.5 Meter Long With Attachment Of Standard Type A Male Plug Or Provide Plug Adopter 10a/220v) Pc 10 3,220.00 32,200.00 97 Pastry Tube (standard) Pc 10 633.00 6,330.00 98 Peeler, Y-type (stainless Steel Overall Dimensions (l X W X H): 7 Inches X 2 1/4 Inches X 1 Inch (minimum) Blade Material: 304 Stainless Steel, 0.7 Mm Head Dimension: (l X W X H) 2 1/4 Inches X 2 1/4 Inches X 1 Inch (minimum) Pc 10 275.00 2,750.00 99 Pepper And Salt Mill (round Body Material: Wood Size: Diameter: 5 Cm X Height: 20 Cm (minimum) Carved Of Wood With Stainless Steel Grinding Mechanism Color: Natural Screw Cap At The Top Of The Mill To Adjust The Thickness Of Peeper Or Spices) Pc 10 1,380.00 13,800.00 100 Piping Bag (transparent Disposable Plastic For Dispensing Ingredients To Pastries Length: 9 Inches Minimum Width: 3 Inches (minimum) Volume: 500 Ml (approximate) Pc 10 242.00 2,420.00 101 Plate Rack (body Shape: Rectangular Material: 304 Stainless Steel Dimension: Length-475 Mm X Width- 290 Mm X Height- 380 Mm (minimum) Pc 12 2,099.00 25,188.00 102 Preparation Table With Sink (stainless Steel, 1 Mm Thick (minimum) Dimensions: L-1200 Mm X W - 700 Mm X H - 850 Mm (minimum) Stainless Steel Tabletop And Stainless Steel Under Shelf Fully Welded Construction Sink: Left Side Single Bowl Sink With Drainer 4 Inches & Faucet Provision Sink Dimension (l X W X D) 400 Mm X 500 Mmx 25 Mm (minimum) Pc 10 4,485.00 44,850.00 103 Pressure Cooker (polished Aluminum Dimension: Diameter: 32 Cm X Height: 25 Cm (minimum) Capacity: 10 Quarts (11.3 Liters) Side Handles For Secure Carrying Equipped With Safety Opening Mechanism, Spring Safety Valve, Rubber Seal Ring) Pc 2 5,520.00 11,040.00 104 Roasting Pan (medium) Pc 10 1,840.00 18,400.00 105 Scissor, Kitchen (body Shape: Ergonomic Blade Material: Stainless Steel, 2 Mm Thick Handle Material Heavy Duty Acrylonitrile Butadiene Styrene (abs) Plastic Overall Length: 20 Cm (minimum) Width: 7.5 Cm (minimum) Pc 10 448.00 4,480.00 106 Siever, Small (stainless Steel Diameter: 20 Cm (minimum) Depth: 7 Cm (minimum) Twin Wire Handle: Length 20 Cm X 5 Mm Diameter (minimum) Fine Mesh: 0.7 Mm (1/32 Inch) (minimum) Pc 10 677.00 6,770.00 107 Skimmer, Fine (stainless Steel, Polished Overall Length: 34 Cm (minimum) Skimmer Head: Diameter -10 Cm X Depth- 4 Cm (minimum) Diameter Of Holes: 2 Mm (approx.) Handle: Length- 12 Cm X Diameter- 2 Cm (minimum) Pc 10 758.00 7,580.00 108 Skimmer, Spider (stainless Steel, Polished Overall Length: 35 Cm (minimum) Skimmer Head Diameter: 15 Cm X Depth 4 Cm(minimum) Handle Length: 12 Cm X 2 Cm Diameter (minimum) Pc 10 472.00 4,720.00 109 Soup Cup Rack (polypropylene Plastic Dimension: Length: 50 Cm X Width: 50 Cm X Height: 10 Cm (minimum) Compartment Length: 11 Cm Compartment Width: 11 Cm Compartment /inside Height: 6.7 Cm) Pc 12 1,553.00 18,636.00 110 Soup Ladle, 12 Oz Pc 10 472.00 4,720.00 111 Soup Ladle, 3 Oz Pc 10 300.00 3,000.00 112 Soup Ladle, 6 Oz Pc 10 403.00 4,030.00 113 Soup Ladle, 8 Oz Pc 10 455.00 4,550.00 114 Spatula (stainless Steel 316 Handle Material: Hardwood (smooth Finish) With Rivets Blade Dimension: Length= 7 .5 Inches X Width-1.5 Inches (minimum) Thickness Of Blade: 1.7 Mm Thick (minimum) Total Length = 12 To 14 Inches) Pc 8 294.00 2,352.00 115 Spoon, Kitchen (stainless Steel, 1.5 Mm Thick Overall Length: 30.5 Cm X Width-7.5 Cm (minimum) Spoon Head Dimension (l X W) 9 Cm X 7.5 Cm (minimum) Handle: Abs Plastic Spoon Head: Oval Type) Pc 8 403.00 3,224.00 116 Spoon, Kitchen (slotted) Oval With Slot Material: Stainless Steel, 1.5 Mm Thick Overall Length: 30.5 Cm X Width-7.5 Cm (minimum) Spoon Head Dimension (l X W) 9 Cm X 7.5 Cm (minimum) Handle: Abs Plastic Spoon Head: Oval Type With Slot At Least 6 Rectangular Slots Preferably With A Packing Case Heat Resistant Up To 220 ° C Pc 8 386.00 3,088.00 117 Spoon, Measuring (body Shape: Bowl In Shape Material: Stainless Steel, 0.7 Mm Thick (minimum) The Set Consists Of The Following Sizes: 1 Pc - 1 Tbsp. (15 Ml) 1 Pc - 1/2 Tbsp. (7.5 Ml) 1 Pc - 1 Tsp. (5 Ml) 1 Pc - 1/2 Tsp. (2.5 Ml) Set 8 291.00 2,328.00 118 Spoon, Parisienne Stainless Steel, Polished Overall Length: 240 Mm (minimum) Scoop Diameter: 30 Mm And 24mm (minimum) With Plastic Handle (polypropylene), Size: 130 Mm X Width-20 Mm (minimum) Pc 8 301.00 2,408.00 119 Spoon, Serving (stainless Steel Dimension: Length: 23 Cm X Width: 5 Cm (minimum) Scoop Dimension (l X W X D): 7 Cm X 5 Cm X 0.9 Cm (minimum) Spoon Thickness: 1.6 Mm (minimum) Pc 24 365.00 8,760.00 120 Spoon, Wooden Hardwood Dimensions: Length- 10 Inches X Width- 2 Inches (minimum) Bowl Dimension: Length -3 Inches X Width 2 Inches X Depth -3/4 Inches (minimum) Total Length: 10 Inches (minimum) Pc 8 92.00 736.00 121 Stock Pot, Large (stainless Steel, 0.8 Mm Thick (minimum) Top Diameter: 30 Cm (minimum) Height: 31 Cm (minimum) Capacity: 20 Quarts (22.7 Liters) Oven Safe To 350⁰f And Dishwasher Safe. Pc 5 2,703.00 13,515.00 122 Strainer Chinois, Small Stainless Steel Strainer Diameter: 20 Cm (minimum) Strainer Depth: 21.5 Cm (minimum) Handle Length: 20 Cm (minimum) With 2 Mm. (approx.) Fine Mesh Handle Has Provision For Hanging Preferably With A Packing Case Pc 5 380.00 1,900.00 123 Strainer Chinois, Medium (stainless Steel Strainer Diameter: 14 Cm (minimum) Strainer Depth: 13 Cm (minimum) Handle Length: 15 Cm (minimum) With 1 Mm (approx.) Fine Mesh Handle Has Provision For Hanging Pc 5 420.00 2,100.00 124 Strainer Medium, Fine Stainless Steel Strainer Diameter: 20 Cm (minimum) Strainer Depth: 7 Cm (minimum) Handle Length: 18 Cm (minimum) With 2 Mm. (approx.) Fine Mesh Strainer’s Two Layers Of Tightly Woven Mesh Catches Handle Has Provision For Hanging Pc 8 248.00 1,984.00 125 Strainer Small, Fine Stainless Steel Strainer Diameter: 13 Cm (minimum) Strainer Depth: 5 Cm (minimum) Handle Length: 13 Cm (minimum) With 1 Mm. (approx.) Fine Mesh Pc 8 240.00 1,920.00 126 Tenderizer, Medium Cast Aluminum Overall Length: 26 Cm (minimum) Dual-sided Hammer, Square Head: 6 Cm X 6 Cm (minimum) Ridged Surface With Rows Of Dull, Pyramid-shaped Spikes Weight: 250 Grams To 500 Grams Pc 8 559.00 4,472.00 127 Thermometer, Pocket /pin Tubular Pen Style Digital Thermometer Product Size: 100 Mm X 40 Mm X 14 Mm (minimum) Display Size: 40 Mm X 20 Mm (minimum) Prove Length: 200 Mm (minimum) Measuring Range: -50 °c To 300 °c (-58 ⁰f To 372 ⁰f) Resolution: 0.1 °c / 0.2 °f Pc 10 880.00 8,800.00 128 Tong, 12 Inches Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Pc 10 322.00 3,220.00 129 Tong, 8 Inches Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Tongs Lock Closed For Storage Preferably With A Packing Case Pc 10 291.00 2,910.00 130 Tray, Baking, Small Rectangular Material: Stainless Steel Dimension: 20 Cm X 30 Cm X 3.7 Cm (minimum) Body Thickness: 0.7- 1.0 Mm Pc 10 548.00 5,480.00 131 Tray, Utility Rectangular Material: Stainless Steel Dimension: Length- 48 Cm X Width-32 Cm X Height-2.5 Cm (minimum) Reinforced Edges Pc 12 644.00 7,728.00 132 Turner 3" X 6" Pc 10 541.00 5,410.00 133 Utility Cart Plastic, Polypropylene(pp) Dimension: (l X W X H) 84 Cm X 43 Cm X 95 Cm (minimum) Capacity: 330 Lbs (150 Kg) Loads (minimum) Three (3) Shelving With At Least 25 Cm Distance Between Shelves Tub Shelf Measure (l X W X D) 84 Cm X 43 Cm X 7 Cm (minimum) With Four (4) Swivel Caster, 10 Cm Diameter, Two Which Have Locking Brakes Pc 2 14,713.00 29,426.00 134 Weighing Scale, 1 Kg, Digital Engineering Plastic And Stainless-steel Weighing Plate Capacity: 1 Kg Accuracy: 1 Gram Back Light Lcd Display With 15 Mm Minimum High Digits Weighing Units: Gram, Ounce, Pound Size: (l X W X H Mm) 163 Mm X 245 Mm X 79 Mmm (minimum) Pc 6 1,630.00 9,780.00 135 Weighing Scale, 5 Kg Circular Bowl Material: Stainless Steel Bowl And Metal Body (coated) Mechanism Type: Spring Lever Capacity: 5 Kg /11 Lb. Sensitivity/graduated By 10 Gm Measurement Units: Gram/kilogram Manual Setting On Zero, Must Be Accurate And Durable Calibrate The Scale Using The Adjustment Knob Preferably With A Packing Case Pc 10 1,794.00 17,940.00 136 Wire Skimmer, Small Round Material: Stainless Steel, Polished Overall Length: 40 Cm (minimum) Skimmer Head Diameter: 12 Cm (minimum) Diameter Of Holes: 2 Mm (approx.) Handle Has Hole For Hanging Pc 10 408.00 4,080.00 137 Wire Whisk, Heavy Duty: Ballon Material: Heavy Duty Stainless Steel Dimensions (l X W): 31.8 Cm X 7.6 Cm (minimum) Handle Length: 12 Cm (minimum) With Hanging Loop No. Of Wires: 8 Wires Wire Diameter: 2 Mm (minimum) Pc 2 564.00 1,128.00 138 Wire Whisk, Medium Ballon Material: Stainless Steel Wire Whisk Medium Dimensions (l X W): 25.4 Cm X 7 Cm (minimum) Handle Length: 10 Cm (minimum) With Hanging Loop No. Of Wires: 6 Wires Wire Diameter: 1.8 Mm (minimum) Pc 10 488.00 4,880.00 139 Wire Whisk, Small Balloon Material: Stainless Steel Wire Whisk Medium Dimensions (l X W): 20.3 Cm X 6 Cm (minimum) Handle Length: 10 Cm (minimum) With Hanging Loop No. Of Wires: 6 Wires Wire Diameter: 1.8 Mm (minimum) Pc 10 372.00 3,720.00 140 Wok, Medium: Round Material: Carbon Steel Thickness: 1.8 Mm Thick (minimum) Dimensions (dia. X H): 45 Cm X 14 Cm (minimum) Handle Material: Steel Riveted Convenient Both Side Handle 10 Cm (minimum) With Flat Bottom Pc 10 771.00 7,710.00 141 Wok, Small Round Material: Carbon Steel Thickness: 1.5 Mm Thick (minimum) Dimensions (dia. X H): 36 Cm X 10 Cm (minimum) Handle Material: Steel Riveted Convenient Both Side Handle 8 Cm (minimum) With Flat Bottom Pc 10 679.00 6,790.00 142 Working Table Rectangular Material: 304 Stainless Steel, 1.29 Mm Thick (gauge 16) Minimum Length: 1220 Mm (minimum) Width: 700 Mm (minimum) Height: 850 Mm (minimum) Tubular Stainless Steel Legs, 38mm (minimum) With 4 Adjustable Bullet Feet Pc 5 13,628.00 68,140.00 143 Zester Standard Material: Stainless Steel Grating Surface Dimensions (l X W): 20.3 Cm X 4 Cm (minimum) Overall Length: 32.5 Cm (minimum) Handle Material: Plastic (polypropylene) Ergonomic Handle Preferably With A Packing Case Dishwasher Safe Pc 10 397.00 3,970.00 Sub Total 702,982.00 Tvl Tools & Equipment (food And Beverages Services) 144 Chair, Dining Side Chair Body Shape: Square Material : Metal (round Or Square) Dimension: Total Height - 33" X 15" X15" (minimum) Capacity: 150 Kg. Black Colored Powder Coated Frame With Foam On Seat Packed In Carton Box Pc 50 1,955.00 97,750.00 145 Coffee Pot, 2 Pints Round Material: Stainless Steel With Cover Capacity: 2 Pints Outside Diameter: 90 -110 Mm Over-all Height: 200 - 230 Mm Thickness: 0.5 - 1 Mm Pc 4 1,139.00 4,556.00 146 Container, Creamer Porcelain With Spout Body Shape: Circular Material: Porcelain Diameter: 50 - 65 Mm Height: 80 - 105 Mm Color: White Pc 10 288.00 2,880.00 147 Cups And Saucers 5-6 Oz. 1. Material: Porcelain 2. Capacity: 5 Oz./140 Ml 3. Heatproof Up To 300 Deg. C 4. Color: White 5. The Item Must Be Of Good Quality Packed In Carton Box Pc 24 403.00 9,672.00 148 Fork, Cocktail Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design Type: Rounded Tip Handle Over-all Length: 110 - 165 Mm Width: 20 - 30 Mm (minimum) Handle Thickness: 2 Mm To 4 Mm Handle Length: 75 - 90 Mm Small, Colo: Silver The Item Must Be Branded And Have Good Quality. Pc 24 173.00 4,152.00 149 Fork, Dessert Fork Body Shape: Fork Shape, Round Tip Material/appearance: Stainless Steel, Highly Polished, With Plain Design, Rounded Tip Handle Length: 150 Mm - 175 Mm Width: 20 – 30mm Handle Thickness: 1.5mm - 3 Mm Number Of Tines: 4 Handle: 130 Mm (minimum) Color: Silver Pc 24 173.00 4,152.00 150 Fork, Dinner Fork Body Shape: Fork Shape Material / Appearance: Stainless Steel, Highly Polished, With 4tines Over - All Length: 120 - 175 Mm Thickness Of Handle: 2 - 3 Mm Color: Silver Packed In Plastic Pouch The Item Must Be Of Good Quality Pc 24 196.00 4,704.00 151 Fork, Fish Fork Body Shape: Fork Shape With Round Tip Material / Appearance: Stainless Steel, Highly Polished, With Plain Design Over-all Length: 180 - 215 Mm Fork Width: 1.5 Mm - 3 Mm Fork Thickness: 1 Mm - 2 Mm Number Of Tines: 4 Length Handle: 120 - 130 Mm Handle Thickness: 2 Mm - 3 Mm Color: Silver Packed In Plastic Pouch Pc 24 288.00 6,912.00 152 Fork, Oyster (4 To 5-1/2 Inches In Overall Length.) Pc 24 173.00 4,152.00 153 Glass, Champagne Flute Oyster Fork Body Shape: Fork Shape Material: Stainless Steel, With High Polish Appearance, And With Plain Design Length: 90 - 120 Mm Thickness: 1 Mm - 3 Mm Silver Color With Three Short Wide Curved Tines Pc 24 288.00 6,912.00 154 Glass, Collins Tumbler Body Shape: Round Material: Clear Glass Capacity: 10 Oz To 14 Oz Thickness: 1.5 -3 Mm (minimum) Packed In Carton Box Pc 24 173.00 4,152.00 155 Glass, Juice / Hi- Ball Material: Clear Glass Type: Hi-ball Height: 140 - 160 Mm Bottom Diameter: 50 -70 Mm Top Diameter: 50 - 70 Mm Thickness: 2 - 4 (minimum) Capacity: 8 Oz. To 10 Oz. Dishwasher Safe The Item Must Be Branded And Good Quality Pc 24 518.00 12,432.00 156 Glass, Pilsner (iced Tea Glass) Type: Flared Rim Body Shape: Round Slender Material: Clear Glass Capacity: 20 Oz. To 23 Oz. Over-all Length: 22 -25 Cm Thickness Of Glass: 1 -3 Mm With Flared Rim And Slender Shape Packed In Carton Box The Item Must Have Good Quality Pc 24 288.00 6,912.00 157 Glass, Red Wine Balloon Shaped Bowl Material: Crystal Clear Glass Rim Diameter: 55 - 60 Mm Thickness: 1.5 Mm - 3 Mm Over - All Length : 200 -220 Mm Capacity: 250 -300 Ml Stem Diameter: 6 - 8 Mm Stem Length: 85 - 90 Mm Base Diameter: 75 - 85 Mm Base Thickness: 2 - 4 Mm Pc 24 403.00 9,672.00 158 Glass, White Wine Balloon Shaped Bowl Material: Crystal Clear Glass Rim Diameter: 55 - 60 Mm Thickness: 1.5 - 3 Mm Over -all Length: 200 -220 Mm Capacity: 270 - 300 Ml Stem Diameter: 6 - 8 Mm Stem Length: 75 - 85 Mm Base Diameter: 70 - 80 Mm Base Thickness: 2 - 5 Mm Pc 24 443.00 10,632.00 159 Gravy Boats Boat Shape With Handle Material: Stainless Steel Capacity: 5 Oz. Appearance: Mirror Polish Finish Size :17cm X 7.3cm X 8.2 Cm / 6.7 X 2.9 X 3.2 Inches (minimum) The Item Must Have Good Quality Pc 4 225.00 900.00 160 Ice Bucket, 2 Liters With Tongs Circular Set Includes: Ice Bucket Material: Stainless Steel Diameter: 140 - 180 Mm Height: 140 - 170 Mm Thickness Of Bucket : 0.7 - 2 Mm Capacity: 2 Liters (minimum) Pc 5 471.00 2,355.00 161 Knife, Butter Stainless Steel W/ Highly Polished Appearance Over-all Length: 140 Mm - 150 Mm Handle Thickness: 3 Mm - 5 Mm With Dull Edge And Rounded Tip Pc 24 127.00 3,048.00 162 Knife, Dinner Flat With Round Tip Material / Appearance: Stainless Steel Blade Highly Polished Handle Material: Stainless Steel Overall Length: 160 - 190 Mm Blade Thickness: 2 - 4 Mm Handle Thickness: 3 - 6 Mm Pc 24 213.00 5,112.00 163 Knife, Fish Flat With Pointed Tip Material / Appearance: Stainless Steel, Highly Polished W/ Plain Design Overall Length: 200 - 220 Mm Width Blade: 20 - 25 Mm Thickness Of Blade: 2 Mm - 4 Mm Thickness Of Handle: 3 Mm - 6 Mm Pc 24 207.00 4,968.00 164 Menu Folder (a4 (297mm X 210 Mm) And A5 (210 Mm X 148 Mm) Pc 5 518.00 2,590.00 165 Napkin Holder Rectangular Material: Stainless Steel With Highly Polished Appearance Dimension: Width: 70 - 90 Mm X Length: 150 - 170 Mm Thickness: 0.7 Mm -2 Mm Packed In Plastic Pouch Pc 6 247.00 1,482.00 166 Order Pads Rectangular Material: 80gsm Offset Paper Each Pad Comes With A 100 Sheets And Corresponding Copy Page Each Pad Has Sequentially Numbered Orders To Make It Easy To Keep Track With 100 Sheets Per Pad And 10 Pads Included Pc 5 58.00 290.00 167 Pepper And Salt Mill: Round Body Material: Wood Size: Diameter: 5 Cm X Height: 20 Cm (minimum) Carved Of Wood With Stainless Steel Grinding Mechanism Color: Natural Pc 20 1,380.00 27,600.00 168 Plate Covers Circular Material: Stainless Steel, Mirror Polished Diameter: 10 1/4 Inches (minimum) Height: 2 7/8 Inches (minimum) Thickness: 1/16 Inch. (minimum) With Handle Pc 8 305.00 2,440.00 169 Plate, Dessert, 7”to 8” Circular Material: Porcelain Supply Must Be A Set, Consisting Of One (1) Of Each: 7 Inches And 8 Inches Plates Color: White Inner Diameter: 145 To 165 Mm Thickness: 3 To 6 Mm Pc 24 207.00 4,968.00 170 Plate, Dinner, 10” Circular Material: Porcelain With No Design Color: White Inner Diameter: 200 Mm - 215 Mm Outer Diameter: 250 - 260 Mm Thickness: 3 Mm - 6 Mm Pc 24 437.00 10,488.00 171 Plate, Fish, 8” To 9” Circular Material: Porcelain With No Design Supply Shall Be A Set Consisting Of: One (1) Each 8 Inches And One (1) Each, 9 Inches Color: White Inner Diameter: 165 Mm - 190 Mm(minimum) Thickness: 3 Mm - 6 Mm Pc 24 207.00 4,968.00 172 Round Table (8's) (54” Or 60”) Pc 10 9,034.00 90,340.00 173 Salad Forks (6” Long) Pc 24 127.00 3,048.00 174 Salad Knife 8” Pc 24 207.00 4,968.00 175 Salad Plates 7” To 8” Pc 24 242.00 5,808.00 176 Salt And Pepper Shakers Square Material: Glass And Aluminum Over-all Height: 75 -90 Mm Length: 50 -60 Mm Width: 50 -60 Mm Pc 4 207.00 828.00 177 Sauce Ladles Circular With Pouring Spout Material: Stainless Steel, Highly Polished Appearance Over-all Length: 220 -230 Mm Ladle Bowl Length: 60 -65 Mm Long Ladle Bowl Diameter: 65 -70 Mm Depth: 10 -15 Mm Handle Details: 150-155 Mm Long X 20 -30 Mm Wide X 2 - 4 Mm Thick Pc 10 403.00 4,030.00 178 Server, Cake Stainless Steel Blade, Highly Polished Appearance 2. Over-all Length: 220 To 270 Mm 3. Width: 60 - 80 Mm 4. Thickness: 1.5 Mm To 2 Mm 5. Handle: 120 -140 Mm Long, Non-toxic Plastic 6. Shape: Shovel-shaped 7. Color: Silver Pc 10 571.00 5,710.00 179 Service Forks : Fork Shape Material/appearance: Stainless Steel, Highly Polished, W/ Palin Design Over-all Length: 220 Mm - 260 Mm Width: 20 - 25mm Handle Thickness: 1.5 Mm - 4 Mm Handle Length - 165 Mm - 185 Mm 4 Tines Color: Silver Pc 6 207.00 1,242.00 180 Service Tray: Rectangular Material: Plastic (pp) Size: 14 Inches X 18 Inches X 1 Inch (minimum) Colo: Any Pc 6 518.00 3,108.00 181 Show/service/ Base Plates 11” To 14” Round Material: Porcelain With No Design Supply Must Be A Set Consisting (1) Of Each: - 11 Inches, - 12 Inches, - 13 Inches, And - 14 Inches Plates Color: White Diameter, Inner : 225 Mm - 250 Mm Thickness: 3 Mm - 6 Mm Set 6 1,208.00 7,248.00 182 Side Plates Or Bread Plates 6” Round Material: Porcelain With No Design Color: White Inner Diameter: 95 Mm To 120 Mm Outer Diameter: 145 Mm To 170 Mm Thickness: 3 Mm - 6mm Pc 24 242.00 5,808.00 183 Side Towels Rectangular Material: Oxford Polyester Soft Cloth Over-all Length: 640 - 680 Mm Over-all Width: 420 -460 Mm Color: Plain White Pc 10 349.00 3,490.00 184 Silver Platter Round Material: Stainless Steel Diameter: 300 -330 Mm Thickness: 1 - 2 Mm Pc 10 570.00 5,700.00 185 Soup Bowl Circular Material: Porcelain Capacity: 24 Oz. (minimum) Pc 24 437.00 10,488.00 186 Soup Ladle Circular Material: Stainless Steel, Highly Polished Appearance Over-all Length: 220 -235 Mm Ladle Bowl Details: 60 -65 Mm Long, 60 -75 Mm Diameter, 10 -15 Mm Deep Pc 10 366.00 3,660.00 187 Soup Tureen Round Material: Stainless Steel Capacity: 7 - 11 Quart Size: 60 X 35 X 32 Cm (minimum) Pc 10 695.00 6,950.00 188 Spoon, Dessert Oval Material/appearance: Stainless Steel, Highly Polished With Plain Design Over-all Length: 175 To 190 Mm Thickness: 2 Mm - 3 Mm Shorter Handle: 120 -130 Mm Color: Silver Pc 24 125.00 3,000.00 189 Spoons, Service Oval Material: Stainless Steel, Highly Polished, W/ Plain Design Over-all Length: 220 Mm - 250 Mm Width: 30 - 38 Mm Handle Thickness: 1.5 Mm - 4 Mm Handle Length - 165 Mm - 185 Mm Color: Silver Pc 6 136.00 816.00 190 Spoons, Soup (cream And Consume) Round Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design, Rounded Tip Handle Over-all Length: 165 Mm - 200 Mm Smaller Oval Shaped Spoon Bowl And Tapers Slightly To The Tip Pc 24 160.00 3,840.00 191 Steak Knife (5”) Pc 24 251.00 6,024.00 192 Sugar Container Round Material: Glass With Brass Lid (or Equivalent) Diameter: 70 -80 Mm Height: 130 -140 Mm Capacity: 12 Oz. Pc 10 288.00 2,880.00 193 Tablecloth, 54 X 54 Inches Rectangle Material: Linen Color: Any Color But Not Black Feature: Washable Pc 10 942.00 9,420.00 194 Tablecloth, 64x64 Inches Rectangular Rectangle Material: Linen Color: Any Color But Not Black Feature: Washable Pc 10 1,208.00 12,080.00 195 Table Napkins, Cloth, 16” X 16” Plain Cloth Body Shape: Square Material: Oxford Polyester Cloth Or Its Equivalent Color: Plain White Pc 60 424.00 25,440.00 196 Table Skirting Cloth Square Material: American Cotton Twill Cloth Color: Any Color Except Black Dimension: 90 Inches X 90 Inches (minimum) Packed In Plastic Pouch Pc 10 2,185.00 21,850.00 197 Table, Square/rectangular (4's Or 6's) Square/rectangle Materia: High Density Polyethylene Tabletop Powder Coated Steel Frame Dimension: 37 - 39 X 37 - 39 Inches Color: White Pc 4 5,382.00 21,528.00 198 Tea Pot, 2 Pints Porcelain Type Body Shape: Round With Handle And Pouring Spout Material: Porcelain Capacity: (2 Pint) Color: White Pc 10 1,139.00 11,390.00 199 Teaspoon Tea Spoon Body Shape: Oval Tip Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design Over-all Length: 120 Mm To 140 Mm Handle Thickness: 2 Mm To 4 Mm Short Handle Length - 100 Mm (minimum) Color: Silver Pc 24 92.00 2,208.00 200 Tong, 8 Inches Standard Material: Stainless Steel Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Pc 7 291.00 2,037.00 201 Tooth Pick Holder Round Material: Stainless Steel, Highly Polished In Appearance Diameter: 30 -35 Mm Diameter (minimum) Height: 65 -75 Mm Capacity: 1.24 Oz. (minimum) Packed In Plastic Pouch Pc 10 101.00 1,010.00 202 Tray Stand Rectangular Material: Chrome Plated Metal Folding Tray Stand Length: 470 -490 Mm Width: 400 -440 Mm Height: 770 -790 Mm Pc 5 2,282.00 11,410.00 203 Tray, Bill Folders/ Change Height: 190 - 220 Mm 3. Width: 120 -140 Mm 4. Thickness: 2 Mm To 3 Mm (minimum) 5. Color: Black Pc 5 271.00 1,355.00 204 Tray, Round (bar) Round Material: (pe/abs) Plastic Rubberized Surface, Non-slip/grip Tight Over-all Diameter: 345 -360 Mm (minimum) Thickness: 2 - 4 Mm (minimum) Color: Black Pc 8 443.00 3,544.00 205 Water Goblet Balloon-shaped Bowl Material: Crystal Clear Glass Over-all Length: 200 -220 Mm Capacity: 270 Ml To 300 Ml Rim Diameter - 55 -65 Mm Thickness: 1 Mm To 3 Mm Stem Length : 75 -85 Mm Stem Diameter : 6 -8 Mm Base Thickness : 3 -4 Mm Base Diameter : 7 -80 Mm Pc 24 124.00 2,976.00 206 Water Pitcher Stainless Steel, Highly Polished Appearance Height: 170 Mm To 220 Mm Top Diameter: 110 -120 Mm (approximate) Capacity: 1 - 1.5 Liter With Pour Spout Pc 10 516.00 5,160.00 Sub Total 571,245.00 Total Amount 2,336,280.00 2. The Department Of Education, Schools Division Of Ilocos Sur Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within Thirty (30) Calendar Days. Bidders Must Have Completed, Within 10 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criteria As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Deped, Schools Division Of Ilocos Sur, And Inspect The Bidding Documents At The Address Given Below From 8:00 A.m. Until 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 22-december 10, 2024 (until 9:00 A.m.) From The Given Address And Website/s Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb Amounting To Five Thousand Pesos (p5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, By Facsimile, Or Through Electronic Means. 6. The Deped, Schools Division Of Ilocos Sur Will Hold A Pre-bid Conference On November 29, 2024, At 10:00 A.m. At The Schools Division Office, Bantay, Ilocos Sur, And/or Through Videoconferencing/webcasting Via Google Meet Using The Link: Https://meet.google.com/tjb-zntu-yys Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below, On Or Before December 12, 2024, 9:00 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On December 12, 2024, At 9:01 A.m. At The Given Address Below And/or Through And/or Virtual. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Deped, Schools Division Of Ilocos Sur Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Before Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Marillac D. Quinsaat Head – Bac Secretariat Department Of Education, Schools Division Of Ilocos Sur Zone V, Bantay, Ilocos Sur, 2727 Email Address: Ilocos.sur@deped.gov.ph 12. You May Visit The Website/s: For Downloading Of Bidding Documents: Depedilocossur.info Date Of Issue: November 22, 2024 Joye D. Madalipay, Ceso Vi Chairperson, Bids And Awards Committee

Details: Description Subject : Design And Build Of Dedvmh Central Waste Holding Area Location : Dedvmh Compound, Bood, Ubay, Bohol Terms Of Reference I. Background Don Emilio Del Valle Memorial Hospital (dedvmh) Is A Licensed Level 2 General Hospital Located In Ubay, Bohol With 200 Authorized Bed Capacity Which Aims To Provide Highly Specialized Quality Healthcare Services To All Where Human Dignity Is Valued And Respected By Competent And Committed Personnel. In Accordance With The Provisions Of And Related Issuances Of Doh Administrative Order No. 2019-0056 Increasing The Bed Capacity Of Dedvmh From 50 Beds To 300 Beds And R.a. No. 11223, Or The “universal Health Care Act”, The Hospital Shall Provide Promotive, Preventive, Diagnostic, Curative, And Palliative Care Services, And Research, Professional Teaching And Training Programs And Shall Be Fully Equipped With The State-of-the Art Equipment And Facilities, Complemented By Adequately Trained And Competent Human Resources For Health Appropriate For A Licensed And Accredited Tertiary General Hospital. Dedvmh Shall Strengthen Its Existing Basic Services, And Aim For The Improvement Of Its Service Capability And Capacity Serving As Referral Hospital In The Northeastern Section Of The Bohol Province, Complementing Local Health Systems And Providers Of Municipalities In The Area. In Order To Fulfill This Mandate, Dedvmh Is Upgrading Its Services To Become A Level Iii Hospital To Provide Better And Quality Healthcare Services Especially In The Northeastern Part Of Bohol, Its Catchment Areas And Nearby Provinces. The Increase In The Bed Capacity And Expansion Of Services And Capability Are Consistent With The Dedvmh’s Hospital Development Plan (hdp) And Philippine Health Facility Development Plan (phfdp) 2020-2040. Ii. Objectives The Purpose Of This Project Is To Expand Capacity Of Central Waste Storage To Manage Increased Waste From Hospital Growth, Enhancing Safety And Compliance With Health And Environmental Standards. The Area Will Be Organized To Streamline Waste Collection, Segregation, And Removal, Improving Staff Efficiency While Implementing Sustainable Features To Minimize Environmental Impact. The Design Will Also Be Scalable To Accommodate Future Hospital Expansions, With Secure Access Points To Ensure The Safety Of Personnel And Waste Management Staff, Creating A Safe, Organized, And Regulation-compliant Environment. The Design Must Also Conform To The Standards Set By In Accordance To The Manual On Technical Guidelines For Hospitals Planning And Design (level 3), Doh Manual On Healthcare Waste Management, 4th Edition, R.a. 9003: Ecological Solid Waste Management Act, R.a. 6969: Toxic And Hazardous Substances & Nuclear Waste Act, And Doh Green And Safe Health Facilities Manual To Develop Climate Smart Health Facilities That Address And Adapt To The Impacts On The Environment. The Winning Bidder Shall Design For This Project With The Approval Of The Medical Center Including The Approved Detailed Estimates, Bill Of Quantities, Technical Specifications, And Methodology Of Construction And Scope Of Works Of The Project. Iii. Conceptual Design The Design Concept Of The Project Was Governed By The Planning And Design Standards Of Level 3 Service Capability Hospital Facility As Prescribed By The Latest Requirements Of The Department Of Health And Other Concerned Agencies. Building Design Shall Conform To The Provisions Of The National Building Code Of The Philippines (pd 1096), Accessibility Law (bp 344), Architecture Law (ra 9266), National Structural Code Of The Philippines, Electrical Engineering Law (ra 7920), Mechanical Engineering Law (ra 5336), Plumbing Code (ra 1378, 1993-1994 Revisions), Fire Code (ra 9514) And Other Laws And Regulations Covering Environmental Concerns And Local Ordinances And Regulations. The As-built Plan And Proposed Schematic Lay-out/call-out Will Be Provided As Basis Reference In The Development Of Preliminary Conceptual Design Plans To Be Submitted As Part Of The Technical Proposal. However, It Is The Responsibility Of The Bidder To Verify Actual Site Conditions And Dimensions. The Preliminary Conceptual Design Plans And Perspectives Shall Be Included Construed Part Of The Technical Proposal As Follows: Preliminary Conceptual Design Plans Required Specified Degree Of Details 1. Schematic Floor Plans: A. Ground Floor All Schematic Plans Shall Be At Least A3 Size Paper And Shall Meet The Minimum Space Requirements And Planning/design Guidelines Of Level 3 Hospital For: - Central Waste Holding Area - Loading Area For Two (2) Wheeler Truck - Loading Dock - Housing For Stainless Steel Storage Tank And Fiberglass Pressure Tank Preliminary Conceptual Design Plans Required Specified Degree Of Details A. Aerial Perspective View All Perspective / Plans Shall Be At Least A3 Size Paper In Colored Printed And Shall Conform With The Preliminary Conceptual Plans And At Least 3d Rendered. B. Man’s Eye / Worm’s Eye Perspective View All Perspective / Plans Shall Be At Least A3 Size Paper In Colored Printed And Shall Conform With The Preliminary Conceptual Plans And At Least 3d Rendered. C. Front Perspective View All Perspective / Plans Shall Be At Least A3 Size Paper In Colored Printed And Shall Conform With The Preliminary Conceptual Plans And At Least 3d Rendered. D. Rear Perspective View In Conformance With The Preliminary Conceptual Plans And At Least 3d Rendered. E. Left & Right-side Perspective View All Perspective / Plans Shall Be At Least A3 Size Paper In Colored Printed And Shall Conform With The Preliminary Conceptual Plans And At Least 3d Rendered F. Longitudinal And Transverse Section Plans At Least One Longitudinal And One Transverse Section Plans In At Least A3 Size Paper The Conceptualization Of The Design Including Its Specifications And Space Requirements Shall Complement And/or Supplement With The Existing Site Conditions. Proponent’s Input, Suggestion And Recommendations With Regard To The Identification Of The Scope Or Physical Components And Structures, Specific Outputs And Requirements And Proposed Construction Methods Shall Be Considered. Iv. Performance Specifications And Parameters Site And Space Planning Were Governed By The Standards, Rules And Regulations On The Design Of Level 3 Hospitals As Prescribed By The Department Of Health And Other Concerned Agencies. Building Design Shall Conform To The Provisions Of The National Building Code Of The Philippines (pd 1096), Accessibility Law (bp 344), Architectural Law (ra 9266), Civil Engineering Law (ra 544), National Structural Code Of The Philippines, Electrical Engineering Law (ra 7920), Mechanical Engineering Law (ra5336), Plumbing Code (ra 1378, 1993-1994 Revisions), Fire Code (ra 9514) And Other Laws And Regulations Covering Environmental Concerns And Local Ordinances And Regulations. A. Pre-detailed Design 1. Engineering Surveys And Investigations 1.1 Surveys And Investigations Of The Site Includes Elevations And Contours (at 0.5m Interval), Soil Tests, Location, Dimension, Floor Elevations And Other Pertinent Data On Existing Buildings And Improvements (roads, Parking Areas, Mature Trees) And Existing Utility Lines (e.g. Water, Power, Telephone). 2. Preliminary Conceptual Design Plans/perspective 2.1 Preparation Of The Following Drawings For Design Development Based On The As Built Plan And Schematic Lay-out/call-out Prepared By The Procuring Entity. Please Refer To Section Iii. Conceptual Design. B. Detailed Design Preparation Of Final Design Concept And Detailed Architecture And Engineering Design Shall Be In Accordance With The Schematic Plans For Hospital Building And Design Conceptualization Duly Approved By The Dedvmh. In Determining The Final Design Concept And Detailed Architecture And Engineering Design, The Implementing Unit Together With The Design And Build Contractor Shall Initiate The Coordination Meeting With The Concerned Stakeholders In The Following Schedule: First Session - The Design And Build Contractor Shall Present The First Schematic Plan And Design Concept For Deliberation, Consultation And Inputs By The Proponents Within Ten (10) Calendar Days From The Effectivity Of Notice To Proceed Second Session - The Design And Build Contractor Shall Present The First Revision Of Schematic Plan And Design Concept For Deliberation, Consultation And Inputs By The Proponents, If There Any, Within Twenty (20) Calendar Days From The Effectivity Of Notice To Proceed Third Session - The Design And Build Contractor Shall Present The Second Revision Of Schematic Plan And Design Concept For Deliberation, Consultation And Inputs By The Proponents, If There Any, Within Thirty (30) Calendar Days From The Effectivity Of Notice To Proceed Upon Approval Of The Final Schematic Plan And Design Concept, The Design And Build Contractor Shall Then Proceed For The Design Phase, Enumerated As Follows: 1. Preparation Of The Following Detailed Design Drawings Of Entire Building (see Doh Checklist Of Drawings Requirements) Based On The Design Development Drawings And Design Parameters Including Any Revisions And Refinements As Approved And Required By The Dedvmh: A. Detailed Architectural Plans (refer To Checklist Of Drawings Requirements And Design Parameters). B. Detailed Structural Plans (refer To Checklist Of Drawings Requirements And Design Parameters). C. Detailed Electrical Plans (refer To Checklist Of Drawings Requirements And Design Parameters). D. Detailed Storm Drain, Sanitary And Plumbing Plans (refer To Checklist Of Drawings Requirements And Design Parameters). E. Detailed Mechanical Plans (refer To Checklist Of Drawings Requirements And Design Parameters). F. Structural Computations, Including Soil Boring Test Results And Seismic Analysis And Electrical Design Computations. G. General Notes And Technical Specifications Describing Type And Quality Of Materials And Equipment To Be Used, Manner Of Construction And The General Conditions Under Which The Project Is To Be Constructed. H. Detailed Cost Estimates, Detailed Bill Of Qualities, Bill Of Quantities, And Program Of Works Including A Summary Sheet Indicating The Unit Prices Of Construction Materials, Labor Rates And Equipment Rentals. I. Summary Of Works J. All Design Output Shall Include The Following: Particulars Design Required Output Hard Copy Printed In Standard Size Paper 40 X 30 Printed And Hardbound Catalog For All Perspective Views, Architectural Finishes, Electrical Fixtures, Sanitary/plumbing Fixtures Utilizing Standard A4 Size Photo Paper Electronic Copy Electronic Copies In Standard Formats: - Designplansfile.pdf; - Designplanscadfile.dwg; - Design3dfile.skp/dwg/etc; - Powerpointpresentation.ppt; - 3d Animations (walkthrough.mp4/avi/mov/etc.) Design And Build Contractor Shall Compile All The Files And To Be Stored In 1tb External Drive Fourth And Final Session - The Design And Build Contractor Shall Submit The Completed Detailed Design Drawings Of The Entire Building, Within Sixty (60) Calendar Days From The Effectivity Of Notice To Proceed. C. Green Building 1. Design Development Shall Consider At Least Basic Requirements For Green Building Applied To Hospital Facilities In Building Component Systems Such As Architectural, Structural, Electrical, Mechanical, And Sanitary. D. 3d Animation And Walkthrough Presentations Designer Shall Prepare A 3d Walkthrough, That Is, Taking A Virtual Tour Of The Proposed Project/structure In Any Design Platform. It Shall Be Produced From Digital 3d Models That Have Been Visualized To A Photo-realistic Standard That Will Showcase All The Design Elements, Both Externally And Internally Of A Property Development And Its Spaces. Minimum Expected Output Shall Include But Not Limited To: - 3d Walkthrough Presentation That Will Show From The Main Entrance Of The Hospital Compound, Going Through The Site Where The Project Is To Be Located. From The Site, It Should Walk Through The Main Facade And Entrance Of The Ground Floor Of The Building Up To The Third Floor Showing All The Respective Floors, Its Lobbies, Hallways, Rooms And Other Support Facilities. - In Addition, The 3d Walkthrough Presentation Shall Include The Exterior Views / Facade Of The Building With Its Adjoining Structures. E. Pre-construction Pre-construction Meeting Shall Be Scheduled On The Next Day That The Completed Detailed Design Drawings Are Submitted. Key Stakeholders—including The Dedvmh, And The Design And Build Contractor (architects, Engineers, Consultants, And Contractor—must Attend). The Meeting Will Serve To:  Review And Confirm The Submitted Design Documents.  Ensure That The Designs Comply With The Project’s Specifications, Budget, And Schedule.  Address Any Necessary Adjustments Or Clarifications Before Construction Commences. After The Pre-construction Meeting, The Design And Build Contractor Shall Finalize And Submit The Following Documents For The Approval Of Dedvmh: 1. Duly Signed Construction Schedule And S-curve 2. Duly Signed Manpower Schedule 3. Duly Signed Construction Methods 4. Duly Signed Pert Cpm And Ghannt Chart Showing Per Item Of Works Of Individual Projects 5. Log Book This Submission Should Encompass All Architectural, Structural, And Mepfs Plans, Specifications, And Any Amendments From The Meeting. These Documents Will Form The Basis For Construction. Upon The Dedvmh’s Approval Of The Submitted Construction Documents, A Notice To Commence Will Be Issued. Construction Activities May Only Begin Following The Issuance Of This Notice. F. Construction As A Rule, Contract Implementation Guidelines For Procurement Of Infrastructure Projects Shall Comply With Annex “e” And Guidelines For The Implementation Of Contracts For Design And Build Infrastructure Projects Shall Comply With Annex “g” Of Irr, Ra 9184. The Following Provisions Shall Supplement These Procedures: 1. Scope Of Works: Supply Of Materials, Labor, Tools And Equipment Necessary To Complete The Execution Of Architectural, Structural And Electrical And Mechanical Works. Includes All Other Necessary Works That Complete For The Fully Operational Building But Limited To The Following Work Items; A) Site Works - Provision Of Temporary Perimeter Fence - Demolition Of Existing Building/structure, Includes Hauling Of Debris Within The Hospital Compound - All Materials, Debris, Etc. Identified As Garbage As Directed By Hospital Management Shall Be Disposed Off-site - Excavation And Grading Provide Necessary Soil Protection On Excavated Portion. - Soil Poisoning And Termite Control B) Foundation Works - Foundation Of The Entire Building Includes Column Footings, Wall Footings And Other Sub-structures As Specified In The Approved Plan. C) Concrete Works - Foundation; Includes Slabs, Beams And Girders D) Architectural Works I) Exterior Walls – All Exterior Wall Ii) Interior Walls – All Interior Wall At Functional Floors Complete With Wall Finishes Iii) Ceiling Works – All Functional Floors As Determined By Procuring Entity Iv) Floor Finish – All Functional Floors As Determined By Procuring Entity V) Doors And Windows– All Exterior Doors And Windows As Per Plan And Specifications Vi) Doors And Windows – All Functional Areas As Determined By Procuring Entity Vii) Painting Works – All Exterior Walls; Interior Walls At Functional Areas Viii) Façade And Signage E) Electrical Works I) Roughing-ins – All Necessary Roughing-ins Including Riser Conduits Including Cable Tray Ii) Panel Boards And Breakers – Main Breaker; Panel Boards From Ground Floor To Third Floor Iii) Wires And Cables – All Wires And Cables At Functional Floors Includes Installation Of Main Feeder Lines Tap To Existing Power House Including Connections To All Panel Board And Breakers Iv) Electrical Fixtures And Devices – All Fixtures And Wiring Devices At Functional Areas. Provision Of Usb Ready Outlets To Every Rooms. V) Application Of Electrical Connections/permits Shall Be Shouldered By The Contractor F) Mechanical Works I) Installation Of Automatic Fire Protection System At Functional Areas Ii) Installation Industrial Exhaust Fan At Functional Areas As Determined By Professional Mechanical Engineer G) Plumbing And Sanitary Works I) Installation Of Plumbing And Sanitary System At Functional Areas, Includes; - Water Supply Pipelines - Waste Water Pipelines - Plumbing Fixtures And Accessories - Necessary Riser Pipes - Fiber Glass Pressure Tank With Shallow Well Jet Pump - Stainless Steel Storage Tank With Enclosure - Drainage System H) Other Works 1. No Works Shall Commence Unless The Contractor Has Submitted The Prescribed Documentary Requirements And The Dedvmh Has Given Written Approval. Work Execution Shall Be In Accordance With Reviewed And Approved Documents. The Contractor Shall Process The Approval Of Permit To Construct (ptc) Form Doh – Central Visayas Regional Office, Cebu City. In Addition To, The Contractor Shall Process The All-necessary Permits (i.e., Building Permit, Occupancy Permit And All Prerequisite Permits) Chargeable Against The Project. 2. The Contractor Shall Be Responsible For Obtaining All Necessary Information As To Risks, Contingencies And Other Circumstances Which May Affect The Works And Shall Prepare And Submit All Necessary Documents Specified By The Concerned Building Officials To Meet All Regulatory Approvals As Specified In The Contract Documents. 3. Any Errors, Omissions, Inconsistencies, Inadequacies Or Failure Submitted By The Contractor That Do Not Comply With The Requirements Shall Be Rectified, Resubmitted And Reviewed At The Contractor’s Cost. If The Contractor Wishes To Modify And Design Or Document Which Has Been Previously Submitted, Reviewed And Approved, The Contractor Shall Notify The Hospital Management And The Procuring Entity Within A Reasonable Period Of Time And Shall Shoulder The Cost Of Such Changes. 4. As A Rule, Changes In Design And Construction Requirements Shall Be Limited Only To Those That Have Not Been Anticipated In The Contract Documents Prior To Contract Signing And Approval. The Following Guidelines Shall Govern Approval For Change Or Variation Orders: A. Change Orders Resulting From Design Errors, Omissions Or Non-conformance With The Performance Specifications And Parameters And The Contract Documents By The Contractor Shall Be Implemented By The Contractor At No Additional Cost To The Procuring Entity. B. Provided That The Contractor Suffers Delay And/or Incurs Costs Due To Changes Or Errors In The Dedvmh Performance Specifications And Parameters, The Contractor Shall Be Entitled To Either One Of The Following: 1. An Extension Of Time For Any Such Delays Under Section 10 Of Annex “e” Of Irr (ra 9184); Or 2. Payment For Such Costs As Specified In The Contract Documents, Provided, That The Cumulative Amount Of The Variation Order Does Not Exceed Ten Percent (10%) Of The Original Project Cost. C. The Contract Documents Shall Include The Manner And Schedule Of Payment Specifying The Estimated Contract Amount And Installments In Which The Contract Will Be Paid. D. The Contractor Shall Be Entitled To Advance Payment Subject To The Provisions Of Section 4 Of Annex “e”, Irr (ra 9184). B. The Dedvmh Shall Define The Quality Control Procedures For The Design And Construction In Accordance With The Doh Guidelines And Shall Issue The Proper Certificates Of Acceptance For Sections Of The Works Or Whole Of The Works As Provided For In The Contract Documents. C. The Contractor Shall Provide All Necessary Equipment, Personnel, Instruments, Documents And Others To Carry Out Specified Tests. D. This Design And Build Projects Shall Have A Minimum Defects Liability Period Of One (1) Year After Contract Completion Or As Provided For In The Contract Documents. This Is Without Prejudice To The Liabilities Imposed Upon The Engineer/architect Who Drew Up The Plans And Specification For Building Sanctioned Under Section 1723 Of The New Civil Code Of The Philippines. E. The Contractor Shall Be Held Liable For Design And Structural Defects And/or Failure Of The Completed Project Within The Warranty Period Of 15 Years For Permanent Structures/buildings As Specified In Section 62.2.3.2 Of The Irr (ra 9184) V. Implementation Arrangement A. Reporting Protocol Contact Person I. Nelson A. Elle, Md, Dtmph, Mscih Office Of The Medical Center Chief Ii Don Emilio Del Valle Memorial Hospital Bood, Ubay, Bohol Ii. Joan V. Kadusale, Cpa Supervising Administrative Officer Don Emilio Del Valle Memorial Hospital Bood, Ubay, Bohol Iii. Leomel R. Labitad, Ce Engineer Iii Don Emilio Del Valle Memorial Hospital Bood, Ubay, Bohol Iv. Allana Jane C. Dacoylo, Uap Architect Ii Don Emilio Del Valle Memorial Hospital Bood, Ubay, Bohol Vi. Elegibility Requirements A. Basic 1. The Eligibility Requirements For Design And Build Scheme Shall Comply With The Applicable Provisions Of Sections 23-24 Of Irr Of Ra 9184. 2. A Modified Set Of Requirements Integrating Eligibility Documents And Criteria For Infrastructure Project And Consulting Services Shall Be Adopted In Accordance With Annex G - Guidelines For The Procurement And Implementation Of Contracts For Design And Build Infrastructure Projects Of Irr Of Ra 9184. 3. Pcab Classification Under “general Building”; License Category C&d “small B” 4. Contractor Must Have Similar Project In The Amount At Least Fifty Percent (50%) Of The Abc Within The Past Five (5) Years. 5. Similar Projects With The Following But Not Limited To:  Low-rise Hospital Facility Project, Must Have Ongoing Or Completed Project At Least 1-storey Building. B. Specialized 1. For Pre-design And Design Phase Of The Contract, The Bidder Shall Comply The Following Professionals To Be Assigned: I. Project Coordinator • Licensed Architect Or Engineer With At Least 10 Years’ Experience In Hospital-related Project Management. • Superb Oral And Written Communication Skills, Organization Skills And Excellent Administrative Abilities. Ii. Architect • The Architect Must Be A Registered And Licensed Architects (rla), With An Updated Professional Identification Card And Must Be A Member In Good Standing Of The Integrated And Accredited Professional Organization Of Architects (iapoa). • Should Have At Least 5 Years’ Experience In Hospital-related Project. Iii. Structural Engineer • Licensed Structural Engineer With At Least 5 Years’ Experience In Hospital-related Project Management. • Must Be A Member Of Accredited Structural Engineer Associations. Iv. Mechanical Engineer • Licensed Professional Mechanical Engineer With At Least 5 Years’ Experience In Hospital-related Project. V. Electrical Engineer • Licensed Professional Electrical Engineer With At Least 5 Years’ Experience In Hospital-related Project. Vi. Sanitary Engineer • Licensed Sanitary Engineer With At Least 5 Years’ Experience In Hospital-related Project. Vii. Cad Operator (at Least One For Architecture And One For Each Engineering Specialty) • At Least Bachelor’s Degree In Architecture, Engineering, And/or Industrial Technology Major In Drafting • Proficient In Autocad Software Viii. Administrative Support Staff 2. For The Construction Phase Of The Contract, The Contractor Shall Assign Technical Personnel With The Following Qualification: I. Project Manager • Licensed Architect Or Engineer With At Least 10 Years’ Experience In Medium Rise Hospital-related Project • Superb Oral And Written Communication Skills, Organization Skills And Excellent Administrative Abilities. Ii. Project Engineer (civil) • Licensed Civil Engineer With At Least 5 Years’ Experience As Project Engineer In Medium Rise Hospital-related Project Iii. Project Engineer (mechanical) • Registered Mechanical Engineer With At Least 5 Years’ Experience As Project Engineer In Medium Rise Hospital-related Project Iv. Project Engineer (electrical) • Registered Electrical Engineer With At Least 5 Years’ Experience As Project Engineer In Medium Rise Hospital-related Project V. Cad Operator (at Least One For Architecture And One For Each Engineering Specialty) • At Least Bachelor’s Degree In Architecture, Engineering, And/or Industrial Technology Major In Drafting • Proficient In Autocad Software Vi. General Foreman (all Discipline) • With At Least 5 Years’ Experience As General Foreman In Medium Rise Project Vii. Skilled Workers (all Discipline) • With At Least 3 Years’ Experience In Medium Rise Project Viii. Administrative Support Staff Vii. Approved Budget Cost Project Description Approved Budget Cost Design Of Dedvmh Central Waste Holding Area 5% - 7% Of Abc Construction Of Dedvmh Central Waste Holding Area 93% - 95% Of Abc Total Abc Php 5,000,000.00 The Approved Budget For The Design-build Contract Is Five Million Pesos (php 5,000,000.00) Which Is Identified As The Design And Build Of Don Emilio Del Valle Memorial Hospital Central Waste Holding Area. Detailed Architectural And Engineering Design Services Shall Not Exceed Seven Percent (7%) Of The Approved Budget Cost (as Per Prboa Resolution No. 6 Series Of 2016 - Architect’s Guidelines For Standards Of Professional Practice Compliances On The Methods Of Compensation And Schedule Of Fees, Pursuant To Republic Act No.9266, Published In The Official Gazette, September 19, 2016 Is The Entire Building Inclusive Of Taxes And Duties. Proposal Exceeding The Approved Budget Shall Be Automatically Rejected. Viii. Estimated Duration Of Engagement The Duration Of The Contract Is One Hundred Eighty (180) Calendar Days From The Design Phase Up To The Completion Of The Project From The Date Of Effectivity: I. Pre-design And Design Phase - 60 Calendar Days Ii. Construction Phase - 120 Calendar Days Ix. Minimum Requirements For Construction Safety And Health A. General Requirements No Contractor Or Subcontractor Shall Require Any Employee To Work In Surroundings Or Under Working Conditions That Are Unsanitary, Hazardous, Or Dangerous To His Health Or Safety. In Order To Meet This General Requirement, The Contractor Must: 1. Initiate And Maintain Programs (written Or Otherwise) To Comply With This General Requirement. 2. Provide Frequent And Regular Inspections Of The Job Sites By Competent Persons.  Competent Person Means One Who Is Capable Of Identifying Existing And Predictable Hazards In The Surroundings Or Working Conditions Which Are Unsanitary, Hazardous, Or Dangerous To Employees, And Who Has Authorization To Prompt Corrective Measures To Eliminate Them. 3. Prohibit The Use Of Any Machinery, Tool, Material, Or Equipment That Is Not In Compliance With Applicable Requirements. 4. Permit Only Those Employees Adequately Trained To Operate Machinery Or Equipment. 5. Provide Training For All Employees In:  Recognition And Avoidance Of Unsafe Conditions  Workplace Safety And Health Requirements  Applicable Hazards, Safe Handling, And Personal Protective Equipment Necessary For Handling Poisons, Caustics, Flammables, And Other Harmful Substances Relevant To Their Job Duties.  Specific Hazards And Procedures For Entering Confined Spaces If Applicable 6. Provide Provisions For Medical Care And First Aid. 7. Develop An Effective Fire Protection And Prevention Plan. 8. Ensure Appropriate Housekeeping Measures Including Clear Walkways And Removal Of Combustible Scrap And Debris. 9. Require The Wearing Of Appropriate Personal Protective Equipment Such As Hard Hats, Safety Glasses, Steel Toe Shoes, Or Other Appropriate Protective Equipment In All Operations Where There Is An Exposure To Hazardous Conditions. 10. Develop An Emergency Action Plan Covering Designated Actions Employers And Employees Must Take To Ensure Employees Safety From Fire And Other Emergency.  Plan Must Be In Writing For Employers With Greater Than 10 Employees  All Employees Must Be Trained Upon Initial Assignment On The Parts Of The Plan The Employee Needs To Know In The Event Of An Emergency. 11. Provide Access To Hand Washing Facilities, Toilets, And An Adequate Supply Of Drinking Water. 12. Provide Safety And Health Signs That Are Clearly Visible To Construction Workers And Public. 13. Conduct Regular Safety Meetings. Source: Colorado State University Occupational Health And Safety Section Department Of Environmental Health Fort Collins, Colorado X. Design Technical Specifications And Requirements The Bidder Shall Submit The Following Design Deliverables In Accordance With The Design Specifications, Parameters And Drawing Checklist But Not Limited To The Following: Activity Reports And Documents Required 1. Pre-design Phase 1.1 Master Site Development Plans And Conceptual 3d Design Five (5) Sets Duly Signed And Seal Master Site Development Plans In Hard Copy (at Least 20 X 30 Paper Size In Desired Minimum Scale) And Softcopy (editable File.dwg And 3d Model.skp/cad/etc) Powerpoint Presentation And/ Or Walkthrough Presentation 2. Design Phase 2.1 Detailed Architecture And Engineering Designs/plans Including Applicable And/or Approved Revisions To The Satisfaction Of The Procuring Entity Five (5) Sets Duly Signed And Seal Detailed Architecture And Engineering Plans/drawing In Hard Copy (at Least 20 X 30 Paper Size In Desired Minimum Scale) And Softcopy (editable File.dwg And 3d Model.skp/cad/etc) (refer To Design Parameters And Drawing Checklists) 2.2 Construction Technical Specifications Five (5) Sets Duly Signed And Seal Construction Technical Specifications In Hard Bound Xi. Space Requirements General:  Ceiling Height Should Be At Least 4.00 Meters. Material Should Be Of Pvc Ceiling Panels Or Any Washable Ceiling Tiles For Easy Maintenance.  All Floor And Wall Should Be Tiled For Easy Cleaning And Maintenance.  Exits Restricted To The Following Types: Door Leading Directly Outside The Building, Interior Stair, Ramp And Exterior Stair.  Provision Of Utility Room Enough To House Trolley And Dirty Utilities With Floor Drain  Loading Area Must Accommodate Two (2) 10-wheeler Truck And The Reinforced Concrete Flooring Must Be 200 Mm Thick, With Class A Concrete Mixture  Loading Dock Height Must Be At Least 600 Mm From Finish Floor Line Of Loading Area. For General Illumination, Provide At Least 150 Lux.  Refer To Doh Manual On Healthcare Waste Management, 4th Edition A: Infectious; B: Sharps; C: Pathological/anatomical, D: Pharmaceutical; E: Chemical, F: Radioactive , G: General Waste  Refer To R.a. 9003: Ecological Solid Waste Management Act  Refer To R.a. 6969: Toxic And Hazardous Substances & Nuclear Waste Act  Refer To Admin Order No. 2008-0021, Dated July 30, 2008, Subject: Gradual Phase-out Of Mercury In All Philippine Health Care Facilities And Institutions Ground Floor – Central Waste Holding Area • Work Area - This Room/area Is Where Janitor Places Waste Bins Carts/trolleys, Stores Cleaning Tools, Supplies And Ppes, Cleans/washes The Waste Bins And Trolleys, Weighs And Records Volumes Of Waste, And Performs Hand Washing. This Will Also Include Dedicated Spaces For Storing Waste Bins, Carts, Trolleys, Cleaning Tools, Supplies, And Ppes. It Will Feature A Comfort Room, A Storage Room With Shelving, And Directly Accessible Space For A Weighing Scale. The Area Will Also Provide Space For A High-pressure Washer, Waste Bins/carts/trolleys, A Fire Extinguisher, And A Floor Strainer For Efficient Cleaning And Waste Management Processes. Additionally, A Provision For An Exhaust Fan Will Be Included To Ensure Proper Ventilation, And The Area Will Be Equipped With A Roll-up Door For Easy Access And Functionality. - Planning Relationships: A. Within Central Waste Holding Area - Lighting System: B. For General Illumination, Provide At Least 150 Lux. - Power System: C. Provide At Least Four (4) Units Of Outlet With Specifications Of 15a, 2p, 240v, Duplex, Grounding Type And Universal Slots. Also, Provide At Least One (1) Unit Of Outlet For Emergency Light With Specifications Of 15a, 2p, And 240v, Single. - Fire Alarm System: D. Provide At Least One (1) Unit Smoke Detector. - Equipment And Accessory: E. Provide At Least Two (2) Units Industrial Exhaust Fan At Ceiling And Wall. F. Provide At Least One (1) Unit Fire Extinguisher. • Hazardous Waste Room - This Room/area Is Dedicated For Storage Of Hazardous Waste Before Treatment (a. Infectious; B. Sharps; C. Chemical; D. Pharmaceutical; E. Pathological/anatomical). The Room Will House Waste Bins/carts/trolleys, A Refrigerator, And Include A Provision For An Exhaust Fan Above Door Height. It Will Feature A Double Swing Metal Door And Biohazard Signage In Accordance With Annex E:1: Emb And Other Universally Accepted Hazard Symbols From The Healthcare Waste Management Manual, Fourth Edition. - Planning Relationships: A. Within Central Waste Holding Area - Lighting System: B. For General Illumination, Provide At Least 150 Lux. - Power System: C. Provide At Least Five (5) Units Of Outlet With Specifications Of 15a, 2p, 240v, Duplex, Grounding Type And Universal Slots. Also, Provide At Least One (1) Unit Of Outlet For Emergency Light With Specifications Of 15a, 2p, And 240v, Single. - Fire Alarm System: D. Provide At Least One (1) Unit Smoke Detector. - Equipment And Accessory: E. Provide At Least One (1) Unit Industrial Exhaust Fan At Wall. • Non-biodegradable Recyclable Waste - This Room/area Is Dedicated For Storage Of Non-biodegradable/recyclable Waste Before Being Transferred To Material Recovery Facility Or Before Subjected For Recycling. The Room Will House Waste Bins/carts/trolleys And Include A Provision For An Exhaust Fan Above Door Height. It Will Feature A Double Swing Metal Door And Biohazard Signage In Accordance With Annex E:1: Emb And Other Universally Accepted Hazard Symbols From The Healthcare Waste Management Manual, Fourth Edition. - Planning Relationships: A. Within Central Waste Holding Area - Lighting System: B. For General Illumination, Provide At Least 150 Lux. - Power System: C. Provide At Least Four (4) Units Of Outlet With Specifications Of 15a, 2p, 240v, Duplex, Grounding Type And Universal Slots. Also, Provide At Least One (1) Unit Of Outlet For Emergency Light With Specifications Of 15a, 2p, And 240v, Single. - Fire Alarm System: D. Provide At Least One (1) Unit Smoke Detector. - Equipment And Accessory: E. Provide At Least One (1) Unit Industrial Exhaust Fan At Wall. • Biodegradable Recyclable Waste - This Room/area Is Dedicated For Storage Of Biodegradable Waste Before Being Picked Up By The Local Waste Transporter. The Room Will House Waste Bins/carts/trolleys, And Include A Provision For An Exhaust Fan Above Door Height. It Will Feature A Double Swing Metal Door And Biohazard Signage In Accordance With Annex E:1: Emb And Other Universally Accepted Hazard Symbols From The Healthcare Waste Management Manual, Fourth Edition. - Planning Relationships: A. Within Central Waste Holding Area - Lighting System: B. For General Illumination, Provide At Least 150 Lux. - Power System: C. Provide At Least Four (4) Units Of Outlet With Specifications Of 15a, 2p, 240v, Duplex, Grounding Type And Universal Slots. Also, Provide At Least One (1) Unit Of Outlet For Emergency Light With Specifications Of 15a, 2p, And 240v, Single. - Fire Alarm System: D. Provide At Least One (1) Unit Smoke Detector. - Equipment And Accessory: E. Provide At Least One (1) Unit Industrial Exhaust Fan At Wall. • Mercury Containing Devices/lamps - This Room/area Is Dedicated For Storage Of Mercury-containing Devices/lamps Before Being Collected By Denr-accredited Tsd (treatment/storage/disposal) Facility. The Room Will House Cabinet With Shelves And Include A Provision For An Exhaust Fan Above Door Height. It Will Feature A Double Swing Metal Door And Biohazard Signage In Accordance With Annex E:1: Emb And Other Universally Accepted Hazard Symbols From The Healthcare Waste Management Manual, Fourth Edition. - Planning Relationships: A. Within Central Waste Holding Area - Lighting System: B. For General Illumination, Provide At Least 150 Lux. - Power System: C. Provide At Least Four (4) Units Of Outlet With Specifications Of 15a, 2p, 240v, Duplex, Grounding Type And Universal Slots. Also, Provide At Least One (1) Unit Of Outlet For Emergency Light With Specifications Of 15a, 2p, And 240v, Single. - Fire Alarm System: D. Provide At Least One (1) Unit Smoke Detector. - Equipment And Accessory: E. Provide At Least One (1) Unit Industrial Exhaust Fan At Wall. • Toilets/comfort Rooms - One Comfort Room For Both Male And Female. - Planning Relationships: A. Within Central Waste Holding Area Work Area - Lighting System: B. For General Illumination, Provide At Least 250 Lux. - Fire Alarm System: C. Provide At Least One (1) Unit Smoke Detector. • Access Ramps - Ramps Designed To Provide A Smooth, For Janitors To Move Waste Bins, Carts, And Trolleys Efficiently. These Ramps Should Meet Accessibility Standards, Including Proper Slope (usually 1:12), Non-slip Surfaces, Handrails On Both Sides, And Clear Signage. They Are Essential For Ensuring Equal Access To All Areas Of A Building, In Compliance With Accessibility Laws Like The Amended Irr Of Bp 344. - Planning Relationships: A. A Ramp Shall Have A Minimum Clear Width Of 1.22 Meters (or 4 Feet) In One Direction (or 2.44 Meters Or 8 Feet In Two Opposite Directions). B. The Slope Of The Ramp Shall Not Be Steeper Than 1:12 Meters. Xii. Design Parameters (architectural) A. Codes And Standards The Architectural Works Shall Be In Accordance With The Following Laws, Codes And Standards.  Laws And Codes: 1. National Building Code Of The Philippines And Its Latest And Amended Irr 2. Ra 9266 Or Architecture Law And Its Latest And Amended Irr 3. Ra 4226 Or Hospital Licensing Act And Its Latest And Amended Irr 4. Bp 344 Or Accessibility Law And Its Latest And Amended Irr 5. Ao 35, S. 1994 Or Ao Pertaining To The Control Of Radiation Hazards 6. Ra 9514 Fire Code Of The Philippines 7. Existing Local Codes And Ordinances. 8. And Other Laws That Applies To The Projects  Standards: 1. Bureau Of Product Standards (bps) 2 Underwriters Laboratory (ul) 2. Doh Technical Guidelines For Hospital & Health Facilities Planning And Design – Level 3 B. General Drawing Guidelines 1. General  All Drawings Shall Be Computer-drafted. Drawings Shall Be Submitted Both In Printed And Electronic Copies.  Keep The Same Orientation For All Plans. The North Orientation Shall Be Indicated In All Architectural Floor Plans. The Orientation Of The Architectural Plans Shall Be Consistent With All The Engineering Plans.  Existing Buildings And New Works Shall Be Clearly Indicated And Labeled In The Site Plans.  Detailed Plans Shall Have A Scale Not Smaller Than 1:50 Meters.  Spot Detailed Plans, Elevations, And Sections Shall Have A Scale Not Smaller Than 1:10 Meters.  Avoid Notes Such As ‘see Architectural Detail’ Or ‘see Structural’. Always Refer With A Callout To The Specific Detail Drawing And Sheet Number. 2. Site Plans  The Site Plans Shall Have A Scale Not Smaller Than 1:500 Meters. 3. Floor Plans  All Plans Shall Be 1:100 Meters. The Same Scale Shall Be Used For The Rest Of The Architectural, Structural, Sanitary, Plumbing, Electrical And Mechanical Plans, Except For Each Trade’s Site Plan, Detailed Plans And Spot Details.  Elevation Callouts Shall Be Indicated On The Floor Plans And Shall Be Consistent With The Elevation Drawing.  Section Line Callouts On The Floor Plans Shall Be Consistent With The Section Drawing.  Floor Plans Shall Be Indicated With Boxed Room Callout Numbers, Including The Callout For Floor Finishes And Wall Finishes.  Floor Elevations Shall Be Indicated In The Floor Plans. This Shall Be In Reference To The Natural Grade Line Or The Established Finished Floor Lines Of The Adjoining Existing Buildings.  The Location Of Mechanical Equipment, E.g. Air Conditioning Shall Be Indicated In The Floor Plans. This Shall Be Consistent With The Mechanical And Electrical Plans.  Door Callouts Shall Be Circles With The Proper Numbering, E.g. D-01.  Window Callouts Shall Be Hexagons With The Proper Numbering, E.g. W-01. 4. Elevations And Sections  Finish Floor Lines And Top Of Truss Lines Shall Be Consistent In All The Elevations, Sections And Structural Plans And Details. 5. Reflected Ceiling Plans  Reflected Ceiling Plans Shall Be Indicated With Boxed Room Callout Numbers, Including The Callout For Ceiling Finishes And Lighting Fixtures.  Ceiling Height Relative And In Reference To The Finish Floor Line Shall Be Indicated In The Reflected Ceiling Plans In Each Room With Boxed Dimensions. This Is To Ensure That The Ceiling Heights Of All Rooms Are Established Whether Or Not Reflected In The Sections.  The Description And Location Of The Fixtures, E.g. Lighting, Smoke Detectors, Air Condition Vents, Exhaust Fans, In The Reflected Ceiling Plans Shall Be Consistent With The Electrical And Mechanical Plans. 6. Roof Plans  Location Of All Downspouts Shall Be Indicated In The Roof Plans. 7. Doors And Windows  Door And Window Schedules Shall Indicate The Type Of Door Or Window, The Number Of Sets, The Location/s Of The Door Or Window, The Materials And Accessories Included And Other Special Specifications, E.g. Color Or Finish. 8. Details  Provide A Minimum Of One (1) Bay Section Of A Scale Not Smaller Than 1:50 Meters For Each Major Building Preferably Cut Along The Area With Special Construction Design.  Provide Spot Detail Plans, Elevations And Sections Of A Scale Not Smaller Than 1:10 Meters For Special Designs With Aesthetic Treatment And Ornamentation.  Provide Detailed Plans Of A Scale Not Smaller Than 1:50 For All Areas Needing Tile Pattern, E.g. Lobby, Corridor, Entrance Walk, Showing The Position And Pattern Of Tiles.  Centerline Location Of Plumbing Fixtures Shall Be Indicated In Detailed Plans With Lines Of Reference And Its Corresponding Dimensions. This Is To Indicate The Exact Locations Of The Plumbing/sanitary Roughing-ins. C. Site Works 1. The Master Site Development Plan Of The Hospital Shall Include The Following:  Contour And Survey Of The Lot, Including Bearing And Distance Of The Property Line  Road Network And Curbs And Sidewalks  Parking Spaces  Reference Location Of Existing Trees  Reference Location And Footprint Of Existing Buildings, With The Corresponding Building Names And Dimensions, Including Distances Between Adjacent Buildings, And Distances Between Buildings And The Nearest Property Line  Reference Location Of Utilities, E.g. Water Reservoirs, Septic Tank, Wastewater Treatment Plant, Powerhouse, Transformers, Waste Storage Area, Security Outposts 2. The Layout Of The Buildings On The Site Shall Be Zoned According To The Service It Provides:  The Outer Zone Shall Include All Front-line Services, E.g. Emergency, Out-patient, X-ray, Laboratory And Other Ancillary Departments.  The Inner Zone Shall Include The Wards.  The Deep Zone Shall Include Services Like The Operating Room, Delivery Room, Nursery, Intensive Care Unit And Other Sensitive Hospital Services.  The Service Zone Shall Include Non-medical Services But Are Essential To Hospital Operations, E.g. Staff Lounge And Lockers.  There Shall Be A Separate Road Network And Entry/exit For The Public And The Service Vehicles, E.g. Ambulance, Waste Collection Vans, Delivery Trucks.  In Limited Lot Areas, Buildings Should At Least Be Spaced Four (4) Meters Apart To Allow Natural Light And Ventilation.  Covered Walkways Shall Be Provided For Access And Connection To All The Buildings.  Ramps Shall Be Provided In All Main Entrances Of The Buildings And Other Access Openings To Walkways Leading To Other Buildings. D. Building Architectural Works 1. Floor Plans  The Structural, Sanitary, Plumbing, Electrical And Mechanical Designs Are Required To Refer To The Architectural Plans And Specifications In Case Of Discrepancies. If An Engineering Design Will Have Any Possible Conflict Or Interference On The Architectural Design, The Latter May Be Adjusted Provided That The Aesthetic Value Will Not Be Compromised.  The Architectural And Engineering Plans Shall Be Consistent All Throughout In Terms Of Dimensions And Locations Of Columns, Beams, Walls, Roof Line, Conduits, Ducts, Pipes, And Fixtures, Among Others. Column And Beam Grid Lines Shall Also Be Consistent In All The Architectural And Engineering Plans.  Verify And Coordinate Floor Plans With The Mechanical, Electrical And Sanitary Design With Regard To The Requirements For Mechanical Rooms, Ahu Rooms, Electrical Rooms, Pipe Chase, And Other Engineering Requirements.  Public Toilets Shall Have Provisions And Fixtures For Persons With Disability As Required By Bp 344. If Enough Space Allows, Toilets Specially Made And Designated For Persons With Disability Is Preferable. 2. Walls  Exterior Walls Shall Be 200mm. Thick, While Interior Walls Shall Be 150mm. Thick. This Is Indicative Of The Finished Wall Thickness Including The Plastering And Tile Works.  Higher Mass: Increase The Wall's Mass With Materials Like Masonry Or High-density Concrete, Which Can Significantly Reduce Sound Transmission.  Toilet Wall Tiles Shall Be 300mm. X 300mm. For Areas Of Six (6) Square Meters Or Below. Toilet Wall Tiles Shall Be 300mm. X 600mm. For Areas Above Six (6) Square Meters.  Layout And Work On Wall And Floor Tiles Must Be Aligned, Plumb, Level, And Square.  All Edges, Corners And Intersections Of Toilet Tiles, Including The Top-most Tile Not Reaching The Ceiling Shall Be Provided With Polyvinyl Chloride Tile Trims.  Tile Color And Design Shall Be Approved First Before Installation. 3. Floors  If Floor Tiles In Two Adjacent Rooms With Different Material, Color Or Design Meet At The Door Opening, The Cut Shall Be Located Middle Of The Door Thickness When In A Closed Position. Provide Details In The Floor Pattern Design.  Floors At The Openings Of Toilets For Persons With Disability Shall Be Sloping. Indicate In The Plans And Sections.  The Size Of The Toilet Floor Tiles Shall Be 300mm. X 300mm. For Areas Of Six (6) Square Meters Or Below. Toilet Floor Tiles Shall Be 300mm. X 600mm. For Areas Above Six (6) Square Meters. Indicate The Tile Pattern.  Layout And Work On Wall And Floor Tiles Must Be Aligned, Plumb, Level, And Square.  All Edges, Corners And Intersections Of Toilet Tiles, Shall Be Provided With Polyvinyl Chloride Tile Trims.  Tile Color And Design Shall Be Approved First Before Installation. 4. Ceiling Works  The Following Rooms Shall Have A Minimum Ceiling Height: A. All Rooms/storages – 4000mm., To Accommodate The Ceiling-mounted Or Light  Ceiling Height For Areas With Special Aesthetic Treatment, E.g. Lobby, Major Conference Room, Auditorium, Executive Office, Shall Be Proportional To The Area Or Room Or As Required By The Designer. However, This Shall Not Be Lower Than 2700mm. Provide Details.  If Acoustic Boards On Aluminum T-runners Would Be Used For The Ceiling, Layout Should Be On Center And Avoiding Cut Pieces. If The Remaining Perimeter Of The Ceiling Is Less Than 600mm. Wide, It Shall Be Designed Complimentary With Fiber Cement Boards On Light Gauge Metal Furring. Likewise With Acoustic Boards In Big Areas, E.g. Offices, And Wards, Shall Be Designed In A Way To Break The Redundancy. Provide Details.  Soffit Of Exterior Beams And Slabs Shall Have Drip Moulds To Prevent Damage Due To Water Sipping Into The Eaves Or Ceiling. Section Details Shall Be Required To Show The Drip-mould.  Material Should Be Of Pvc Ceiling Panels Or Any Washable Ceiling Tiles For Easy Maintenance. 5. Doors And Windows  All Doors Shall Have Metal Doors.  Aluminum Frames Of Glass Doors Shall Be Powder-coated.  Door Finish And Color Shall Be Approved First Before Application.  All Doors Of A High-occupancy Room Shall Swing Outwards And As Required By The Fire Code Of The Philippines.  Door Jambs With No Moulding/casing Installed On Concrete Walls Shall Have Construction Grooves All Around. Provide Details.  All Doors And Windows Shall Have Reinforced Concrete Lintel Beams. Provide Details. 6. Stairs, Ramps And Corridors  Ramps For Persons With Disability Shall Have A Slope Not Higher Than 1:12. Handrails And Clearances Shall Conform With The Requirements Of Bp 344.  Regular Stairs Shall Have Risers At 150mm. High And Treads At 300mm. Wide. Fire Stairs Could Have A Maximum Riser At 200mm. And Tread At 250mm. Handrails Shall Be 1100mm. High. Clearances Shall Conform With The Requirements Of The Fire Code Of The Philippines.  Corridors Shall Have A Minimum Unobstructed Width Of 2450mm. This Shall Be Measured Clear From The Surface Of The Finished Wall And Not On-center Of The Rough Chb Wall.  Corridors Shall Not Be Areas For Temporary Or Permanent Storage Of Stretchers, Wheelchairs, Trolleys, Food Carts, Oxygen Tanks Or Other Movable Hospital Equipment. Storage Or Parking Spaces Shall Be Provided For These.  Corridors And Exit Doors Shall Conform With The Requirements Of The Fire Code Of The Philippines. 7. Fixtures And Accessories  Three-way Electrical Light Switches Shall Be Provided At The Foot And The Top Of The Stairs Per Floor. Likewise, At Both Ends Of A Long Corridor.  Electrical Light Switches Shall Be Located By The Knob Side Of The Door.  Electrical Switches And Outlets Shall Be Installed Plumb And Level.  Public Toilets Shall Always Be Provided With Heavy-duty Soap Dispensers And Electric Hand Dryers.  Public Toilets Shall Always Be Provided With Stainless Steel Handrails In Conformity To The Requirements Of Bp 344.  A Drainage Line Shall Be Provided For Window-type Air Conditioners. Likewise, Split-type Air Conditioners Located In The Interior Part Of The Building Shall Be Located Adjacent To Areas With Drainage Lines, E.g. Toilets, Downspouts, Balconies.  Seal Gaps And Openings: Ensure All Joints, Gaps, And Penetrations (e.g., Electrical Outlets, Ducts) Are Sealed With Acoustical Caulk Or Gaskets To Prevent Sound Leakage.  Sterile Area Lighting Type: Use Sealed, Recessed, Or Surface-mounted Led Fixtures That Are Flush With The Ceiling Surface To Prevent Dust Accumulation. 8. Roofing Works  The Section Of The Roof Gutters Shall Be Designed, In Case Of A Clogged Downspout, So That The Overflow Of Water Will Be Directed Outside Of The Building And Not Towards The Eaves Or Interior Ceiling To Prevent Any Damage. Provide Details.  Avoid Valley Or Inside Gutters In Roof Design. But In Cases Required In Aesthetic Design, Valley Or Inside Gutters Shall Be In Stainless Steel Or Concrete Gutters With Membrane-type Waterproofing, And The Section Shall Be Designed With A Capacity For Big Volume To Prevent Any Damage Due To Overflow. Provide Details.  Parapets, Designed As A Roof Protection From The Winds, Must Be Designed To Satisfy The Preceding Parameters. Provide Details.  The Slope Of The Roof Shall Not Be Less Than 30 Degrees. 9. Painting  Painted Interior Wall Shall Be At Least In Gloss Latex Finish Or Any Type Of Paints Applicable As Washable Or Easily Maintained, And Shall Be In Anti-bacterial And Odor-absorbent Paint Finish.  Painted Exterior Wall Shall Be At Least In Moisture-resistant/water-repellent Solvent-based Paint Finish, Textured Or Smooth, Unless Otherwise Specified.  Paint Color And Shade Shall Be Approved First Before Application. D. Specific Requirements 1. Provide Spot Detail Plans And Sections Of The Following:  Gutter, Eaves, And Parapet  Ceiling - Covelight, Special Connections And Design, Mouldings, Valances  Ramps - Handrail Design And Floor Pattern  Doors, Windows And Gates - Grille Works,  Special Architectural Treatment And Design, E.g. Façade Design, Special Window And Door, Counter/nurse Station Counter  Special Carpentry Works, E.g. Partitions, Cabinetry  Building And Room Signages And Wayfinding Systems  Other” Details As May Be Required 2. Provide Room Data Sheets, Including Detail Floor Plan, Ceiling Plan And Sections Of The Following Rooms, In Coordination With The Requirements Of The Electrical, Sanitary And Mechanical Designs: A. Work Area, Including Furniture And Outlets With Specific Dimensions Of The Location Of Fixtures And Accessories, And In Coordination With The Requirements Of The Electrical And Mechanical Engineering Design. B. Storage C. D. (all Blanks Shall Be Filled As Required By Or Applicable To The Project.) E. Summary Of Materials  Materials To Be Used Shall Be Fire-resistant, Non-toxic, Moisture-resistant And Termite-resistant, E.g. Fiber Cement Board, Light-gauge Steel Frame, Polyvinyl Chloride Ceiling Panels.  Wet Areas, E.g. Toilets, And Pantry/lounge Shall Use Non-skid/non-slip Vitrified Ceramic Floor Tiles.  Heavy Traffic Areas, E.g. Lobby, And Corridor Shall Use Heavy-duty Seamless Granite Floor Tiles Or A Higher Type Of Floor Material.  Vinyl Floor Tiles For Sterile Areas Of Delivery & Nicu Suite Shall Be Homogenous And Not Less 3mm. Thick.  Ramps And Stairs Shall Use Non-skid/non-slip Floor Tiles, Materials As Specified.  Aluminum T-runners Shall Be Powder Coated.  Metal Rod Hangers With Adjustable Clips, And Not Galvanized Iron Wires, Shall Be Used To Support And Suspend The Aluminum T-runners And Light Gauge Metal Furrings.  Roofing Sheets Shall Be Ga.# 24 Aluminum-coated, Pre-painted, And Pre-formed. F. Drawing Requirements: See Attached Doh Checklist Of Drawings. -end Of Architectural Design Parameters- Xiii. Design Parameters (structural/civil Works) A. Codes And Standards The Civil/structural Design Shall Be In Accordance With The Following Codes And Standards  Codes 1. National Structural Code Of The Philippines (nscp) 2010 2. National Building Code Of The Philippines And Its Revised Irr 3. Accessibility Law 4. Local Codes And Ordinances  Standards 7. Bureau Of Product Standards (bps) 8. Philippine National Standards (pns) 9. Dpwh Blue Book 10. American Concrete Institute (aci) 11. American Society For Testing Materials (astm) 12. American Welding Society (aws) B. Site Works Based On The Master Site Development Plan Of The Hospital, Provide Where Applicable Complete Design And Details Of Hospital Road (concrete With Curb And Gutter, Including Drainage) Network, Walkways, Parking Areas And Fencing. 1. The Main Hospital Road Shall Be Capable Of Two-way Traffic (at Least 6mts. Width) With A Minimum Thickness Of 150mm (8 Inches). Concrete Strength Should Be At Least 3000psi. Interior Roads (leading To Support Facilities) Shall Be Designed To Accommodate Delivery Vehicles, And Fire Trucks In Case Of Emergency. 2. Walkway Should Be At Least 100mm Thk. With Concrete Strength Of 2500psi. Ramps Should Be Provided, Instead Of Steps, For Any Change In Elevations. 3. Parking Area Slabs Should Be At Least 150mm Thk. With Concrete Strength Of 3000psi. 4. Fences Should Be Seen Through In Front Of The Hospital While The Tree (3) Other Sides Should Be Concrete Hollow Blocks With Minimum Height Of 2 Meters And To Be Provided With Perimeter Lighting. See-through Fence Design Will Be Made Of 32mm Square Bars Spaced At 100mm On Center And Provided With Three (3) Concrete Hollow Blocks (45mm High) Zocalo Walls. C. Buildings 1. The Hospital Buildings Should Be Designed Using A Seismic Importance Factor Of 1.5 For The Immediate Occupancy Category. Buildings Should Be Designed In Accordance With Nscp Requirements Up To Magnitude 7 For Those Near Seismic Source Type A. Seismic Gaps Between Buildings (old And New) Should Be Properly Observed. 2. The Hospital Buildings Should Be Designed Also Using Wind Importance Factor Of 1.15 (especially For Design Of Trusses/roofing System). Concrete Gutters And Parapet Walls Should Be Provided As Additional Protection To The Roofing System During Strong Typhoons. Wind Velocity Of 300-350 Kph Shall Be Considered Upon The Recommendation Of Structural Engineer 3. The Structural Designer Should Verify With Philippine Volcanology And Seismology (phivolcs) The Distance Of The Proposed Hospital To Nearest Active Fault Lines And With The Denr For Geo-hazard Mapping. 4. Soil Investigation (at Least Three Boreholes) Should Be Conducted To Determine Soil Bearing Capacity And Recommended Foundation Design (applicable Even For One Storey Structure). 5. The Structural Designer Is Encouraged To Use Fire-resistive And Non-toxic Materials. D. Details – The Following Shall Be Provided: 1. Connection Details Of Beams And Columns Following The Requirements Of Nscp On Confined Areas. 2. Connection Of Trusses To Beams And Columns. 3. Splicing Details Of Reinforcing Bars On Columns And Beams And The Required Bar Cut-off Points. 4. Details For Connection Of New Construction & Old Construction Structural Members Such As Expansions Joints For Thermal Expansion/contraction. 5. Include Thermal Expansion/contraction Prevention Methodologies Specifically On Soft Joints Areas Between Structural And Architectural Members. E. Summary Of Materials 1. Concrete Shall Be Portland Cement And Conforming To Astm Specification C150, Type I To Type Ii 2. Coarse Aggregates Shall Consist Of Washed Gravel, Crushed Stone Or Rock Or A Combination Thereof Conforming To Astm C33 3. Concrete Hollow Blocks Shall Be A Standard Product Of Recognized Manufacturer Conforming To Pns 16 With At Least 350psi Strength. 4. Reinforcing Bars Shall Conform With Pns Grade 60 For 16mm Dia. And Above And Pns Grade 40 For 12mm Dia And Below. 5. Structural Steel Shall Conform With Astm A36/a6m 6. Bolts And Studs Shall Conform With Astm A 325 7. Welding Electrodes Shall Be E60 Or E 70 And Conform With Aws F. Drawing Requirements: See Attached Checklist -end Of Structural/civil Works Design Parameters- Xiv. Design Parameters (sanitary/plumbing Works) A. Codes And Standards The Sanitary/plumbing Design Shall Be In Accordance With The Following Codes And Standards.  Codes: 1. National Building Code Of The Philippines And Its New Irr 2. Fire Code Of The Philippines 3. National Plumbing Code Of The Philippines (npcp) 4. Sanitation Code Of The Philippines 5. Existing Local Codes And Ordinances.  Standards: 1. Bureau Of Product Standards (bps) 2. Philippine National Standards For Drinking-water 3. Underwriters Laboratory (ul) 4. Doh National \ Laboratory (nrl) 5. Doh Health Care Waste Management Manual 6. National Water Resources Board (nwrb) 7. National Plumbers Association Of The Philippines (nampap) 8. Philippine Society Of Sanitary Engineers, Inc. (psse) B. Site Works  Based On The Master Site Development Of The Hospital, The Site Works Shall Provide Complete Layout Of The Following: 1. Storm Drainage Network, Indicating Drainage Manholes And Pipe Culvert; 2. Sewerage Pipe Network, Indicating Sewage Manholes, Sewage Pipes And The Location Of The Proposed Sewage Treatment Plant; And 3. Water Supply Network, Indicating The Location Of Water Service Entrance, Cisterns, Elevated Water Tank And Proposed Pump House.  The Storm Drainage Network Shall Accommodate The Magnitude Of Peak Rates Of Surface Run-off Including Drainage Coming From The Buildings. The System Shall Be Capable Of Handling The Design Flows Routing To The Designated Outfall; For Rainfall Calculation And Sizing Of Drainage Pipes, Refer To Table-d2, Appendix-d, National Plumbing Code Of The Philippines And Current Rainfall Record From Pagasa.  The Sewerage Pipe Network Design Shall Accommodate All Sewage Coming From All The Facilities, Conveyed By Gravitational Flow Leading To The Sewage Treatment Plant; Per Capita Wastewater Demand: 100-130 Gal/capita/day Per Bed C. Building Facilities Sanitary/plumbing System 1. Sewer Line And Vent System  Provide Complete Sewer Line And Vent System From All (domestic) Plumbing Fixtures And Floor Drains, Laid By Gravity Flow Leading To The Sewage Treatment Plant (stp);  For Demand Weight Of Fixtures In Fixture Units; Refer To Appendix A, Table A-2, Npcp 2. Wastewater Line And Vent System  For All Wash Areas Dealing And Generating With Oil/grease, Provide Separate Wasteline And Vent System And Solely Tap To The Proposed Grease Trap And Then Connect Its Effluent To The Sewage Treatment Plant.  For Estimated Demand Weight Of Fixtures In Fixture Units; Refer To Appendix A, Table A-2, Npcp Waterline System  Provide Complete Cold Water Supply Pipes To All Plumbing Fixtures. From The Main Water Source, The Water Shall Be Pumped To The Elevated Water Tank (ewt) And Conveyed To The Fixtures By Gravity System And Or Distributed To Fixtures By Transfer Pumped With Constant Pressure Through A Pneumatic Storage Tank, Whichever Is Feasible. 4. Storm Drainage System  Complete Storm Drainage System Shall Be Provided For All Roofs, Canopies, Concrete Ledges And Balconies Including Condensate Drains Laid For Gravity Flow Connected To A Leader/pipe Line Leading To The Natural Ground Level Storm Drainage Network. D. Building Facilities Sanitary/plumbing System 1. Provide Details Of The Following:  Fiberglass Pressure Tank (40g Minimum Capacity With Shallow Well Jet Pump Of At Least 1 Hp)  Stainless Steel Storage Tanks, Grade 304 With Enclosure. E. Summary Of Materials  Sewer And Vent Pipes; Unplasticized Polyvinyl Chloride (upvc) Extra Series 1000 (conforming To Iso 3633 Astm D2729 Including Trims And Fittings)  Storm Drainage Pipes; Downspouts, Unplasticized Polyvinyl Chloride (upvc) Extra Series 1000 (conforming To Iso 3633 Astm D2729 Including Trims And Fittings, Bps Certified)  Drainage Pipes; 250mm Dia. And Below, Non-reinforced Concrete Pipe (nrcdp)  300mm Dia. And Above, Reinforced Concrete Pipe (rcdp)  Drainage Manholes; Street Inlet, Curb Inlet, Traffic Type Reinforced Concrete Area Drain/catch Basin, Reinforced Load Bearing Chb  Sewage Manholes; Traffic Type Reinforced Concrete With Standard Steel Brass Cover  Wastewater Pipeline; Extra Heavy (xh) Single Hub, Hub Less Cast Iron Pipes And Fittings (cip) Conforming To Astm Standard 888  Cleanouts; Cast Iron Brass With Countersunk Plug (bps Certified)  Floor Drains/deck Drains; Cast Iron Brass (bps Certified)  Gutter Drains; Cast Iron Dome Type Brass (bps Certified)  Cold Waterline Pipes; For Buildings, Polypropylene Pn10 Fusion Weld Pipes Including Trims And Fittings (bps Certified)  Hot Waterline System; For Buildings, Polypropylene Pn20 Fusion Weld Pipes Including Trims And Fittings (bps Certified)  Trench Grating; Galvanized/stainless Steel Iron Grates  Plumbing Fixtures Including Trims, Fittings And Accessories; (bps Certified)  Water Closet-tank Type Push Button Flush  Lavatory - (pedestal/counter Type) With C-spout Spray Faucet  Urinal-wall Hung Flush Valve Type F. Drawing Requirements: See Attached Doh Checklist Standards Based On Revised Irr Of The National Building Code Of The Philippines (pd 1096) -end Of Sanitary/plumbing Works Design Parameters- Xv. Design Parameters (mechanical Works) A. Codes And Standards The Mechanical Design Shall Be In Accordance With The Following Codes And Standards.  Codes: 1. National Building Code Of The Philippines And Its New Irr 2. Fire Code Of The Philippines 3. Mechanical Engineering Code Of The Philippines (me Code) 4. Existing Local Government Codes And Ordinances.  Standards: 1. Bureau Of Product Standards (bps) 2. Philippine National Standards (pns) 3. Underwriters Laboratory (ul) And Factory Mutual (fm) 4. International Electrotechnical Commission (iec) 1988 5. National Fire Protection Association (nfpa) 6. National Fire Protection Association (nfpa) 99 Standard For Health Care Facilities. 7. American Society Of Heating, Refrigeration And Air Conditioning Engineers (ashrae). 8. Center For Disease Control And Prevention (cdc) Manual. B. Automatic Fire Sprinkler System  The Automatic Fire Sprinkler System Shall Be Composed Of Complete Plans And Drawings Of The Following: 1. Site Development Plan And Vicinity Map, Indicating The Location Of The Buildings, Firewater Reserve Tank, Firewater Line, Yard Loop And Private Fire Hydrant. 2. General Notes, Legends And Symbols Including Schematic Diagram Of The Fire Sprinkler System And Schematic Diagram Of Alarm Monitoring System. 3. Floor Layout And Isometric Layout Of The Automatic Fire Sprinkler System Indicating Pipe Sizes And The Location Of The Pipes, Valves, Sprinkler Heads, Riser Nipples, Fire Hose Cabinets, Sprinkler Main Riser, Drain Pipes, Cross Mains, Branch Lines, Inspector’s Test Connections, Hangers And Sway Braces. 4. Equipment Schedule, Detail Drawings, Fire Pump And Jockey Pump Layout. 5. Architectural, Structural, Electrical And Plumbing Drawings Of The Firewater Tank And Pumphouse.  An Automatic Fire Sprinkler Shall Be Provided In All Hospital Building Except For Those Fire Resistive One-storey Hospital Building.  Hazard Classification Shall Be Light Hazard Occupancy.  Area Of Coverage Shall Be 146 Square Meters And Water Density Shall Be 4.07 Lps/sq. M.  Protection Area Per Sprinkler Head Shall Be 20 Square Meters At 2.2 Meters Minimum Distance Between Sprinklers And 4.2 Meters Maximum Spacing.  All Floor Control Valves Shall Be Equipped With Supervisory Switch, Water Flow Detector And Drain System.  Water Supply Shall Be Horizontal Split Case Centrifugal Fire Pump With Diesel Engine Or Ac Motor And A Vertical In-line Jockey Pump With Controller.  Firewater Reserve Tank Shall Be Ground Level Monolithic Concrete Tank Sized For A Minimum Of 30 Minutes.  Hydraulic Calculations Report Shall Be Based On Npfa-13 Format.  Fire Extinguisher On Every Room/storage Should Be Type Abc. C. Ventilation And Air Conditioning System  The Ventilation And Air Conditioning System Shall Be Composed Of Complete Plans And Drawings Of The Following: 1. General Notes, Legends And Symbols Including Schematic Diagram Of The Ventilation 2. Floor Layout Of The Ventilation Location Of The Industrial Exhaust Fans. 3. Duct Layout Indicating Duct Sizes, Route And Location Of The Dampers, Diffusers, Return Air Register, Hangers And Sway Braces. 4. Equipment Schedule And Details Drawings Of Ventilating System.  Industrial Type Exhaust Fans With Integral Air Diffuser Shall Be Provided In All Storages And Work Areas.  Ceiling Fans, Orbit Type With 360° Oscillation Shall Be Provided In Work Area. D. Summary Of Materials 1. Automatic Fire Sprinkler System A. The Fire Pump Shall Be Ul Listed/fm Approved, Diesel Engine Or Electric Motor Driven, Designed Specifically Intended For An Automatic Water Sprinkler Protection System. B. The Jockey Pump Shall Be Ul Listed/fm Approved, Electric Motor Driven, 220v, 3-phase, 60 Hertz, And Electric Power Connection. C. Sprinkler Head Shall Be Ul Listed/fm Approved, Pendant, Upright Or Sidewall Unit, 83 Lpm Flow Capacity Per Head And Temperature Fusing At 57.5° C To 74°c. D. The Alarm Assembly Shall Be Ul Listed/fm Approved, Constructed And Installed That Any Flow Of Water From The Sprinkler System Equal To Or Greater Than That From The Single Automatic Head Shall Result In An Audible And Visual Sign In The Vicinity Of The Building. E. Alarm And Supervision System Of The Automatic Water Sprinkler Shall Include The Monitoring Water Flow Switch At Each Floor Of The Building, Fire Pump And Jockey Pump Running Condition And Power Supplies, Level Of Water In The Reservoir And Control Valves. F. Pipes Shall Be B.i. Schedule 40. Screw Fittings Shall Be Used For Inside Piping. -end Of Mechanical Works Design Parameters- Xvi. Design Parameters (electrical Works) A. Codes And Standards The Electrical System Design Parameters Shall Be In Accordance With The Following Codes And Standards.  Codes: 1. Philippine Electrical Code 2. National Electrical Code 3. Fire Code Of The Philippines 4. National Building Code Of The Philippines And Its New Irr 5. Existing Local Codes And Ordinances  Standards: 1. Bureau Of Product Standards (bps) 2. Underwriters Laboratory (ul) 3. National Fire Protection Association 4. International Electrotechnical Commission (iec) 5. Illumination Engineering Society (ies) 6. National Electrical Manufacturer’s Association (nema) 7. Doh Manual On Technical Guidelines For Hospital And Health Facilities Planning And Design B. Building Facilities Electrical System 1. Lighting System  Provide And Install Adequate Normal Branch Circuits For Lighting System To All Areas Using The Standard Lighting Design Analysis. Utilize The Standard Illumination Requirements Per Area Of Concern Using The Preferred Particular Type Of Luminaires. 2. Power System  Provide And Install Adequate Normal Branch Circuits For The Power System. 3. Provide Details Of The Following:  Lighting Fixtures/luminaires  Panelboard And Circuit Breakers  Switchgear And Other Metering Devices  Electrical And Hospital Equipment  Installation And Termination Of Auxiliary And Other Special Devices And Equipment  Power And Telephone Handholes (as May Be Required)  Pedestal And Service Entrance To Bldg.  Grounding System Layout  Substation/power House And Electrical Room  Transformer And Generator Mounting  Others As May Be Required. C. Summary Of Materials  General Lighting Luminaries: Fixtures Type Shall Be As Indicated On The Lighting Layout Plan. 1. Fluorescent Lamp Shall Be Linear, Circular Or Self-ballasted Compact Fluorescent Lamps. 2. Fluorescent Lamps Shall Be Cool Or Warm White And 3. Lamp Holders Shall Be Made Of Thermosetting Plastic. 4. Fluorescent Ballast: Magnetic Or Electronic Type With High Power Factor Or High Frequency Energy Saving Type. 5. Fluorescent Fixture Housing Shall Be Steel Sheet With High Reflectance Powder Coat Paint Finish. 6. Downlights And Pin Lights Shall Be Of Heavy Gauge Spun Aluminum Equipped With Lamp As Indicated On The Drawings. 7. Other Special Lighting Requirements Shall Be As Approved By The Implementing Agency.  Wiring Devices: Wiring Devices Shall Be Non-automatic Control Devices, The Contact Is Guaranteed By The Pressure Of The Special Spiral Springs. 1. Switches Shall Be Of 15a, 250v Or 300v Except As Otherwise Noted And Approved. Terminals Shall Be Screw-type Or Quick-connected Type. 2. General Use Receptacle Shall Be 15a, 240v Grounding Type Unless Otherwise Indicated On The Drawings. 3. Special Purpose Receptacles Shall Be As Called For On The Drawings. 4. Matching Plugs Shall Be Supplied.  Panelboards And Circuit Breakers: The Panelboard And Circuit Breakers Shall Be Equipped With Molded-case Circuit Breakers And Shall Be The Type As Indicated In The Panelboard Schedule And Details. 1. Provide Molded-case Circuit Breakers Of Frame, Trip Rating And Interrupting Capacity As Shown On The Drawings. The Circuit Breakers Shall Be Quick-make, Quick Break, Thermal-magnetic, Trip-indicating And Shall Have Common Trip On All Multiple Breakers With Internal Trip Mechanism. 2. All Current-carrying Parts Of The Panelboards Shall Be Plated. Provide Solid Neutral (s/n) Assembly When Required. The Assembly Shall Be Isolated From The Enclosure.  Electrical Conduits, Boxes And Fittings: All Conduits, Boxes And Fittings Shall Be Standard Rigid Steel, Zinc Coated Or Galvanized. 1. Rigid Steel Conduits (rsc) 2. Rigid Metal Conduits (rmc) 3. Intermediate Metal Conduits (imc) 4. Electrical Metallic Tubing (emt) 5. Unplasticized Polyvinyl Chloride (upvc) If Required Shall Be Schedule 40.  Conductors: Wires And Cables Shall Be Of The Approved Type And Unless Specified Or Indicated Otherwise, All Power And Lighting Conductors Shall Be Insulated For 600 Volts. 1. The Conductors Used In The Wiring System Shall Be Of Soft-annealed Copper Having A Conductivity Of Not Less Than 98% Of That Of Pure Copper And Insulated For 60° C Temperatures. 2. All Conduits Of Convenience Outlets And Wire-ways For Lighting Branch Circuit Home-runs Shall Be Wired With A Minimum Of 3.5 Mm Square In Size.  Fire Detection And Alarm System: 1. The Fire Detection And Alarm System Shall Be Of Multiplex, Microprocessor- Controlled Addressable Or Zonal Conventional Fire Detection, Alarm And Communication System. 2. The System Shall Consist Of Full Integration Automatic Fire Detection, Voice Alarm Communication And Fire Fighters Telephone System. 3. The System Shall Consist Of Control Station, Mimic Panel Initiating And Indicating Devices, Control Modules And System Of Wirings. 4. Actuation Of The Protective Signaling System Shall Occur By Manual Pull Station, Automatic Smoke Or Heat Detector, Sprinkler Flow Switch And Tamper Switch. 5. The System Shall Be Able To Monitors The Status Of Flow Switches And Supervisory Switches Installed At The Sprinkler System Risers. These Monitoring Points Are Also Addressable Or The Conventional Zonal In The Same Way As The Detectors Are Making Them Easily Recognizable At The Control Panel. 6. Occupant Notification Shall Be Accomplished Automatically. Notification Will Be General, Audible Alarm Type Complying With Appropriate Section Of Nfpa. 7. The System Shall Be Installed With Provisions For Future Connection To The Nearest Fire Services Station In The Locality.  Ventilation System The Ventilation And Air Conditioning System Shall Be Composed Of Complete Plans And Drawings Of The Following: 1. General Notes, Legends And Symbols Including Schematic Diagram Of The Ventilation System. 2. Floor Layout Of The Ventilation System Indicating The Capacity And Location Of The Air Conditioners And Fans. 3. Duct Layout Indicating Duct Sizes, Route And Location Of The Dampers, Diffusers, Return Air Register, Hangers And Sway Braces. 4. Equipment Schedule And Details Drawings Of Air Conditioners And Ventilating System. A) Industrial Type Exhaust Fans With Integral Air Diffuser Shall Be Provided In All Rooms. B) Ceiling Fans, Orbit Type With 360° Oscillation Shall Be Provided In Work Area. -end Of Electrical Works Design Parameters- Xvii. Design Parameters (green And Safe Health Facilities)  Codes And Standards Green And Safe Health Facilities Shall Be In Accordance With The Following Laws, Codes And Standards.  Global Initiatives & Developments: 1. World Health Assembly Resolution On Universal Health Care (2019) 2. World Health Resolution On Climate Change And Health (2008) 3. Un Resolution On Sustainable Development Goals (2015) 4. Global Action On Patients’ Safety  Laws And Codes: 1. Sanitation Code Of The Philippines Irr Of Chapter Xvii 2. The Local Government Code Of 1991 3. Clean Water Act Of 2004 4. National Building Code Of The Philippines (pd 1096) 5. General Appropriation Act Fiscal Year 2021 (ra 11518) 6. Occupational Safety And Health (ra 11058) 7. Safe Hospital Initiative (2011) 8. Universal Health Care Act (ra 11285) 9. Implementing Rules And Regulations Of Accessibility Law (ra 344) 10. Ecological Solid Waste Management Act Of 2000 (ra 9003) 11. Climate Change Act Of 2009 (ra 9729) 12. Other Related Standards A. Guidelines The Green And Safe Hf Initiative Represents A Climate Smart Paradigm Shift, Away From Traditional Disaster Response To One That Proactively Seeks To Minimize The Health Impact Of Disasters And Emergencies Through Climate Adaptation And Mitigation Measures (including Climate-proofing And Reduction Of The Environmental Footprint), And Preparedness. Consequently, It Is Essential That This Green Manual Is Incorporated Into The Hospital And Hf Development Agenda That Are Backed With Earmarked Resources In The National Budget, And That Has Governance And Support From The Highest Levels Of Government.  The Department Of Health Shall, As Much As Possible, Promote The Greening Of Hospitals And Health Facilities, Including The Improvement Of Energy And Water Efficiency And Conservation, Sustainable Cooling Systems, And Sustainable Healthcare Waste Management In Hospitals.  In Line With Its Continuing Efforts In Green And Safe Hfs, The Doh Shall Encourage National And Local Government Hospitals And Other Hfs To Seek Green Certifications From Green Building Rating System/s For Their New Construction Or Expansion, Repair And Renovation Projects. B. Criteria And Compliance System For Outstanding Green And Safe (climate Smart) Health Facilities.  Criterion Compliance 1. Governance – Leadership And Management, Trainings, Proper Implementation, Commitment 2. Energy Efficiency – Reduction Of Energy Consumption, Use Of Renewable And Clean Energies 3. Water Efficiency, Sanitation And Hygiene – Adequate Water, Water Reuse/recycling, Water Conservation, Rainwater Harvesting. Safe Drinking Water, Proper Use And Maintenance Of Sanitary Toilet Facilities 4. Health Care Waste Management Waste – Segregation, Collection, Storage, Transport, Treatment, Proper Waste Disposal, Recycling 5. Environmentally Resilient Health Facility – Structural Member, Non-structural Member, Emergency And Disaster Preparedness Plan 6. Site Sustainability – Healing Gardens Within, Fresh Air, Herbal Plants, Accessibility, Existence Of Alternative Routes 7. Material Sustainability – Use Of Sustainable Materials, Procurement Of Sustainable And Recyclable Products, Less Use Of Hazardous And Toxic Substances 8. Indoor Environmental Quality – Lighting, Ventilation, Interior Design, Air Quality Management C. Energy Efficiency  Orientate Building & Façade Design To Mitigate Heat Gain. The East And West Facades Receive The Greatest Solar Radiation, And Should Be Designed To Avoid Direct Sun.  Use Of Glass/glazing With A Lower U-value And Shading Coefficient Reduce Solar Heat Gain.  Allow Provision For Easy Access For Maintenance And Cleaning Especially For Curtain Wall System.  Consider Lifespan, Durability And Life Cycle-costing When Selecting Façade Materials.  Install And Use Energy-efficient Lighting Fixtures I.e. Led, Cfl, Slim Type Fluorescent, Etc.  Skylights (if Applicable) And Windows To Maximize Natural Lighting And Ventilation On Selected Areas. Utilizing Daylight As Possible.  Use Of Appliance With Inverter Technology With Variable Frequency Drive Technology.  Window And Door Assemblies Shall Have Complete Gaskets, Weather Stripping, Door Bottom Sweeps And Seals.  All Operable Windows Shall Be Provided With Safety Features For Protection Against Strong Winds, Water Penetration And Protection For Building Occupants Including Child Safety And Security.  Specific Air Exchange Rates Are Usually Attained Through Artificial Ventilation. Adequate Ventilation Throughout The Facility Contributes To Maintaining A Hygienic Environment. Presence Of Functional Windows And Doors, That Allow At Least 6-8 Air Changes Per Hour For Natural Ventilation. For Airborne Infection Isolation Room/s And Er/triage Areas, Greater Or More Than 12 Air Changes Per Hour Is Recommended, While Up To 15 Air Changes Per Hour May Be Recommended For Operating Procedure, Or Delivery Rooms.  Light-colored Building Envelopes Is Also Recommended To Reduce Heat Transfer From The Outside To Inside Of The Building By Having Surfaces With High Solar Reflectance Index (sri). D. Water Efficiency, Sanitation And Hygiene  Optimize Water Conservation Through Installation Of Rainwater Harvesting Cistern Tank  Use Of Waterless Urinals And Dual Flush Water Closets.  Use Of Low-flow & Water Efficient Faucet And Hand-held Bidets.  Use Of Water-saving Shower Heads  For Hospitals, There Must Be At Least One Water Closet For Every Eight Patients In Compliance With Ra 4226 – Hospital Licensure Act.  A Separate Toilet For Male And Female Is Preferred, And Shall Be Pwd Accessible. And, A Separate Toilet For The Staff, With A Provision Of One Toilet For Every Fifteen Personnel Shall Be Applied.  Waterless Urinals Must Be Provided For Male Toilets.  There Should Be Sufficient And Functional Hand-washing Facilities. E. Environmentally Resilient Health Facility  Ground Floor Must Be Above Ground Line And Anticipated Flood Level. F. Material Sustainability  Building Materials, If Applicable, Must Be Locally Sourced To Minimize Carbon Footprint.  Rapidly Renewable And Sustainable Materials Are Also Recommended. Refer To Sec. 16.3.4 Of Doh Green And Safe Health Facilities Manual For List Of Sustainable Construction Materials That Can Be Used.  Use Of Materials (specifically Wet-applied Materials) That Are Low In Vocs (volatile Organic Compounds) G. Site Sustainability  Adopt The Development Controls Indicated In The National Building Code Of The Philippines To Establish The Extent Of The Health Facility Site Can Develop.  Biophilic Design Is Recommended To Help Reduce Stress, Improve Cognitive Function And Creativity, Improve Patients’ Well-being And Expedite Healing.  Porous Pavement Is Recommended At The Site Development To Alleviate Flooding. Landscape Swales Is Also One Solution. H. Indoor Environmental Quality  Harvest Natural Daylight If Applicable. Drawing Requirements: See Doh Standard Checklist Based On Revised Irr Of The National Building Code Of The Philippines (pd 1096). Checklist Of Drawing Requirements In The Preparation/evaluation/approval Of Detailed Architectural And Engineering Plans And Other Documents For Infrastructure Project Implementation. -end Of Green And Safe Health Facilities Design Parameters- Xviii. Build Aspect Furnish Labour, Materials, Equipment, Paint, Tools And Other Facilities To Complete The Entire Building Including Architectural, Structural/ Civil, Electrical, Mechanical, Sanitary, Communication, Fire Protection, And Other Related Works To Complete The Scope As Specified And/or As Shown On Drawings And Plans 1. General Requirement  Contractor’s Temporary Facility And Lay Down Yard.  Communication And Transmittal, Reproduction, Tarpaulin/billboard And Photos  Material Testing (rsb, Chb, Concrete, Steel)  Safety Requirements (warning Signs, Hardhat, Etc.)  As Built Plan  Demolition, Clearing Work, Permits And Licenses 2. Other Items Of Work  Demolition Of Existing Structures In Affected Areas Or Where The Proposed Project Shall Be Situated, Clearing And Disposal Of All Debris Generated During Construction.  All Serviceable Materials Shall Be Turn Over To Doh-dedvmh Through Its Representative  Soil Excavation And Soil Treatment  Restoration Of Any Damaged Properties During The Construction  Permit Fees, And Other Necessary Documents For The Project Shall Be Shouldered By The Contractor  Temporary Facilities Shall Be Provided During The Construction Period, To Be Constructed Within The Hospital Compound, Which Shall Serve As The Field Office, Storage Of Materials And Bunkhouse For The Workers.  No Implementation Of The Project Without An Approved Plan And Other Related Documents.  Strict Implementation Of (dole Guidelines And Other Standards Applicable) Health And Safety Rules.  Shall Abide By The Medical Center Hospital House Rules  Conduct Weekly Progress And Coordinative Report To The Agency Or Its Representative  Other Items Of Work Not Mentioned Herewith But It Is Very Necessary For Execution And Completion Or Works Shall Be Included And Charge To The Contractor 3. Pre-installation Requirements  All Tests To Be Conducted Shall Be Witnessed By The Hospital Representatives.  Soil Investigation  Concrete Strength Testing  Reinforcing Bar Strength Testing  Concrete Masonry Unit (cmu) Testing  All Plumbing And Sanitary System  Automatic Fire Sprinkler System  Ventilation And Air Conditioning System  All Electrical System  And Other Tests That Necessary To Perform To Ensure The Quality Of The Project  All Certifications And Reports Under Post-installation Requirement Shall Be Submitted To The Hospital Representatives.  The Contractor Shall Submit A Sample Of Materials For Approval Of The Medical Center Chief Prior To Installation.  No Implementation Or Execution Of Work In Any Discipline Without The Approval Of Medical Center Chief Or Through Its Representative  Any Request For Inspection, Approval, Concrete Pouring, Testing And Commissioning Must Be Address To Medical Center Chief Or Must Adhere To The Reporting Protocol As Mentioned Above. -end Of Build Aspect- Checklist Of Drawing Requirements In The Preparation/evaluation/approval Of Detailed Architectural And Engineering Plans And Other Documents For Infrastructure Project Implementation Reference: Revised Implementing Rules And Regulations Of The National Building Code Of The Philippines (pd 1096) Project : Location : Sheet Number Sheet Contents Remarks* Architectural Drawings (as Applicable) A – 1 (a…n) Perspective, Site Development Plan, Vicinity Map/location Plan (2.00 Kms. Radius) Table Of Contents A – 2 (a…n) Floor Plans (scale 1:100m Minimum) Including Furniture Layout When Necessary A – 3 (a…n) Four (4) Elevations (scale 1:100m Minimum) A – 4 (a…n) Two (2) Sections (scale 1:100m Minimum) Including Spot Details When Necessary A – 5 (a…n) Roof Plan/s Showing Downspouts (scale 1:100m Minimum), Including Detail Of Gutter, Downspout, Etc. A – 6 (a…n) Reflected Ceiling Plan/s (scale 1:100m Minimum), Including Details A – 7 (a…n) Details Of Stairs, Fire Escapes/exits, Accessible Ramps, Etc. (scale 1:50m), Including Details Of Railings, Treads, Risers, Etc., In The Form Of Plans, Elevation/section A – 8 (a…n) Details Of Toilets (1:50 M) Including Accessible Toilets In The Form Of Plans, Elevation/section A – 9 (a…n) Details Of Specialized Design Features (scale 1:50 M) Such As Partitions, Cabinets, Etc. And Accessible Design Features A – 10 (a…n) Detail Of Typical Bay Section From Ground To Roof (scale 1:50 M) A – 11 (a…n) Details Of Special Elevations/section Rooms (1:50m) In Form Of Plans, A – 12 (a…n) Schedule Of Doors, Gates, Emergency Exits, Etc. (scale 1:50 M), Including Specifications For Materials And Hardware A – 13 (a…n) Schedule Of Windows (scale 1:50 M), Including Specifications For Materials And Hardware A – 14 (a…n) Schedule Of Finishes For Interior And Exterior Floors, Walls, Ceilings Architectural Technical Specifications Architectural Scope Of Works Architectural Bill Of Quantities * To Be Marked As Either Complying Or Non-complying/complete Or Incomplete By The Evaluator Or To Be Filled With Supporting Comments (use Additional Sheets If Necessary) Evaluated By: ____________________________________________________________ Page 1 Of 6 Checklist Of Drawing Requirements In The Preparation/evaluation/approval Of Detailed Architectural And Engineering Plans And Other Documents For Infrastructure Project Implementation Reference: Revised Implementing Rules And Regulations Of The National Building Code Of The Philippines (pd 1096) Project : Location : Sheet Number Sheet Contents Remarks* Architectural Interior Design Drawings (as Applicable) Aid – 1 (a…n) Floor Plans Showing Layout Of Floor Finishes (scale 1:100m Minimum) Aid – 2 (a…n) Floor Plans Showing Layout Of Furniture/finishing Partitions, Cabinets, Etc. (scale 1:100m Minimum) Aid – 3 (a…n) Interior Elevations And Sections Showing Wall Patterns, Ceiling Sections, Etc. (scale 1:100m Minimum) Aid – 4 (a…n) Details Of Partitions, Cabinets, Furniture, Ceiling And Other Interior Design Features (scale 1:100m Minimum) Aid – 5 (a…n) Architectural Interior Perspective/s Architectural Interior Design Technical Specifications Architectural Interior Design Scope Of Works Architectural Interior Design Bill Of Quantities * To Be Marked As Either Complying Or Non-complying/complete Or Incomplete By The Evaluator Or To Be Filled With Supporting Comments (use Additional Sheets If Necessary) Evaluated By: ____________________________________________________________ Page 2 Of 6 Checklist Of Drawing Requirements In The Preparation/evaluation/approval Of Detailed Architectural And Engineering Plans And Other Documents For Infrastructure Project Implementation Reference: Revised Implementing Rules And Regulations Of The National Building Code Of The Philippines (pd 1096) Project : Location : Sheet Number Sheet Contents Remarks* Structural Drawings (as Applicable) S – 1 (a…n) General Notes And Construction Standards S – 2 (a…n) Site Development Plan S – 3 (a…n) Foundation Plan/s (scale 1:100m Minimum) S – 4 (a…n) Floor Framing Plan/s (scale 1:100m Minimum) S – 5 (a…n) Roof Framing Plan (scale 1:100m Minimum) S – 6 (a…n) Schedule And Detail Of Footings And Columns S – 7 (a…n) Schedule And Detail Of Beams And Floor Slabs S – 8 (a…n) Detail Of Trusses S – 9 (a…n) Details Of Stairs, Ramps, Fire Exits S – 10 (a…n) Other Spot Details Structural Analysis And Design (for 2 Storey Building And Higher) Boring And Land Test Results (for 3 Storey Building And Higher) Seismic Analysis Structural Technical Specifications Structural Scope Of Works Structural Bill Of Quantities * To Be Marked As Either Complying Or Non-complying/complete Or Incomplete By The Evaluator Or To Be Filled With Supporting Comments (use Additional Sheets If Necessary) Evaluated By: ____________________________________________________________ Page 3 Of 6 Checklist Of Drawing Requirements In The Preparation/evaluation/approval Of Detailed Architectural And Engineering Plans And Other Documents For Infrastructure Project Implementation Reference: Revised Implementing Rules And Regulations Of The National Building Code Of The Philippines (pd 1096) Project : Location : Sheet Number Sheet Contents Remarks* Electrical Drawings (as Applicable) E – 1 (a…n) General Notes And Legends E – 2 (a…n) Location And Site Plan E – 3 (a…n) Lighting Layout (scale 1:100m Minimum) Including Details E – 4 (a…n) Power Layout (scale 1:100m Minimum) Including Details E – 5 (a…n) Auxiliary System Layout (scale 1:100m Minimum) Including E – 6 (a…n) Schedule And Detail Of Loads E – 7 (a…n) Riser Diagram E – 8 (a…n) Other Detail Electrical Computation Design Analysis Electrical Technical Specifications Electrical Scope Of Works Electrical Bill Of Quantities * To Be Marked As Either Complying Or Non-complying/complete Or Incomplete By The Evaluator Or To Be Filled With Supporting Comments (use Additional Sheets If Necessary) Evaluated By: ____________________________________________________________ Page 4 Of 6 Electronics/auxiliary System Ready For Integrated Communications 1. Fire Alarm System 2. Security System Cctv Checklist Of Drawing Requirements In The Preparation/evaluation/approval Of Detailed Architectural And Engineering Plans And Other Documents For Infrastructure Project Implementation Reference: Revised Implementing Rules And Regulations Of The National Building Code Of The Philippines (pd 1096) Project : Location : Sheet Number Sheet Contents Remarks* Plumbing/sanitary Drawings (as Applicable) P – 1 (a…n) General Notes And Legends P – 2 (a…n) Location And Site Plan P – 3 (a…n) Storm Drainage Layout (scale 1:100m Minimum) Including Actual Length Of Tapping Line To Main Drainage Line P – 4 (a…n) Waterline Layout (scale 1:100m Minimum) Including Actual Length Of Tapping Line From Main Water Source When Applicable P – 5 (a…n) Sewerline Layout (scale 1:100m Minimum) Including Actual Length Of Tapping Line To Septic Tank Or Existing Sewerline P – 6 (a…n) Isometric Layout, Showing Waterline, Sewerline And Drainage Line P – 7 (a…n) Detail Of Connections, Catch Basins, Downspouts, Etc. P – 8 (a…n) Detail Of Septic Tank/sewer Treatment Plant Design Analysis Sanitary Technical Specifications Sanitary Scope Of Works Sanitary Bill Of Quantities * To Be Marked As Either Complying Or Non-complying/complete Or Incomplete By The Evaluator Or To Be Filled With Supporting Comments (use Additional Sheets If Necessary) Evaluated By: ____________________________________________________________ Page 5 Of 6 Checklist Of Drawing Requirements In The Preparation/evaluation/approval Of Detailed Architectural And Engineering Plans And Other Documents For Infrastructure Project Implementation Reference: Revised Implementing Rules And Regulations Of The National Building Code Of The Philippines (pd 1096) Project : Location : Sheet Number Sheet Contents Remarks* Mechanical Drawings (as Applicable) M – 1 (a…n) General Notes And Legends, Site Development Plan, Location Plans M – 2 (a…n) Floor Plans/isometric Drawings (scale 1:100m Minimum) Showing Ventilation And Air Conditioning Systems And Other Installations M – 3 (a…n) Floor Plans/isometric Drawings (scale 1:100m Minimum) Of Gas Pipeline System And Details M – 4 (a…n) Floor Plans/isometric Drawings (scale 1:100m Minimum) Of Air-conditioning Systems And Details M – 5 (a…n) Floor Plans/isometric Drawings (scale 1:100m Minimum) Of Fire Suppression Systems, Fire Sprinkler System, Wet Stand Pipe, Dry Standpipe And Other Installation M – 6 (a…n) Details Water Tank, Flow Diagram (scale 1:50m) M – 7 (a…n) Details Of Firewater Supply Sytem (scale 1:50m) M – 8 (a…n) Detail Of Elevators, Escalators, Dumbwaiters, Etc. (scale 1:50m) M – 9 (a…n) Detail Of Other Machinery/equipment (scale 1:50) M – 10 (a…n) Longitudinal And Transverse Section Of Building (scale 1:100m) Showing Manner Of Support Of Machines/equipment Mechanical Technical Specifications Mechanical Scope Of Works Mechanical Bill Of Quantities * To Be Marked As Either Complying Or Non-complying/complete Or Incomplete By The Evaluator Or To Be Filled With Supporting Comments (use Additional Sheets If Necessary) Evaluated By: ____________________________________________________________ Page 6 Of 6 General Guidelines • All Construction Works Shall Be Undertaken By Contractor In Accordance With Existing Laws And All Other Applicable Rules And Regulations. • The Contractor Shall Be Responsible In Setting Out Reference Lines, Elevations (lines And Grades) Prior And During The Execution Of The Works. All References Shall Be Maintained And Protected By The Contractor At His Own Expense. Disturbed References Shall Be Restored To Its Original Position Without Extra Cost To Devmh. • The Contractor Shall Carry Out The Works Properly And In Accordance With This Contract. The Contractor Shall Provide All Supervision, Labor, Materials, Plant And Equipment, Which May Be Required. • The Contractor Shall Commence Execution Of The Works On The Start Date And Shall Carry Out The Works In Accordance With The Approved Pert/cpm Network Diagram Submitted By The Contractor, As Updated With The Approval Of The Procuring Entity’s Representative, And Shall Complete The Works By The Intended Completion Date. • The Contractor Shall Be Responsible For The Safety Of All Activities On The Site. • During On-going Construction And Before The Turn-over Of The Project, Engineering & Facilities Management Staff, End-users, Twg And Bac Shall Inspect The Works Undertaken By Contractor. Hospital Engineers And End-users Discover Any Deviations By Contractor From The Approved Construction Plans, Contractor Shall Be Required To Rectify All Such Deviations, Within Such Period Required By Client. • Contractor Shall Have Full Responsibility For Any And All Damages To Existing Hospital Facilities, Utilities, And/or Any Portion Of The Hospital’s Common Area, Due To The Works Undertaken By Contractor, Whether Accidental Or Intentional. • No Variation Order Shall Be Undertaken Unless Verified By Hospital Engineer And Approved By Executive Committee. • Contractor Shall Not Cover Or Block Stub-outs (cleanouts, Water Source, Exhaust, Sewer, Drainage, Etc.) When Not Utilized. Said Stub-outs Shall At All Times Be Free Of Obstructions And Easily Accessible. • Contractor Shall Secure A Utility Tapping Permit Prior To Tapping From Utility Provision. • Electricity And Water Consumed During Construction Shall Be Charged To Contractor. • End-users Reserves The Right To Inspect The Works At Any Time. • Contractor Shall Insure And Hold Client, Its Affiliates, Officers, Directors, Stockholders, Employees, Agents, And/or Representatives, Free And Harmless From And Against Any Injury, Losses, Claims, Damages, Liabilities, Expenses, And/or Costs Of Litigation, Resulting From Or Arising Out Of The Works Undertaken By Contractor. • In Event Of Force Majeure, The Contractor Shall Rectify, Replace Or Build The Unfinished Projects When It Is Not Yet Completed And Accepted W/o Additional Cost For The Procuring Entity. • Contractor Shall Comply With The Construction House Rules Of This Hospital.

Details: Description Invitation To Bid For Early Procurement Activity (cy 2025) For The Supply And Delivery Of Various Medical / Surgical Supplies Through Framework Agreement 1. The Gov. Celestino Gallares Memorial Medical Center, Using A Single-year For A Duration Of One (1) Year Framework Agreement, Through The Nep 2025 And Hospital Income Intends To Apply The Sum Of One Hundred Seventy Nine Million Ninety Three Thousand Nine Hundred Thirty Eight Pesos (php179,093,938.00) Being The Abc To Payments Under The Contract For Ib No. 2024-11-042. Bids Received In Excess Of The Total Cost Per Line Items Shall Be Automatically Rejected. 2. The Gov. Celestino Gallares Memorial Medical Center Now Invites Bids For Above Procurement Project. Delivery Of The Goods Is Required Within Ten (10) Calendar Days After Issuance Of A Call-off Or Any Date As Determined By The Pe. Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Gcgmmc Bids And Awards Committee (bac) Office Through Electronic Mail Via Gcgmmc.bacmedsurglabsupplies@gmail.com Or Telephone Call At (038) 411-4868 To 69 Local 286 And Inspect The Bidding Documents At The Address Given Below During Office Hours. 5. A Complete Set Of Bidding Documents May Be Acquired And Downloaded By Interested Bidders On November 18, 2024-december 10, 2024 From Gcgmmc Google Drive (gcgmmc.bacmedsurglabsupplies@gmail.com) And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb In The Amount Of Fifty Thousand Pesos Only (php 50,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Through Cash At The Gcgmmc Cashier Section Or Bank Deposit With The Following Bank Details: Bank Name: Development Bank Of The Philippines Account Name: Gcgmmc General Fund Account Number: General Fund Account No. 00-0-00001-780-3 For Bidders Paying Thru Online Transfer Or Bank Deposits, A Successful Transaction/payment Must Be Sent To The Bac’s Official Email Address. Acknowledgement Receipt Will Be Issued In Lieu Of The Official Receipt (coa Circular No. 2021-014 Clause 5.2) As Proof That Payment Is Verified, Confirmed And Received By Gcgmmc. Only Upon The Issuance Of The Acknowledgement Receipt Shall The Bidder Be Granted Access To The Bac Google Drive. 6. The Gov. Celestino Gallares Memorial Medical Center Will Hold A Pre-bid Conference On November 26, 2024 @ 1:00 Pm At Cloud Lounge, 5/f, 555 Building, 0053 Miguel Parras St., Poblacion Ii, Tagbilaran City, 6300 Bohol Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, On Or Before December 10, 2024 @ 8:59am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On December 10, 2024 @ 9:00am At The Gcgmmc Hospital Library And Training Hall, 5/f 555 Building, 0053 Miguel Parras St., Poblacion Ii, Tagbilaran City, 6300 Bohol. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. No Further Instructions. 11. The Gov. Celestino Gallares Memorial Medical Center Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Magnolia Marie B. Tiempo Bac Secretariat Bids And Awards Committee (bac) Office Gov. Celestino Gallares Memorial Medical Center 0053, M. Parras St., Poblacion Ii, Tagbilaran City, 6300 Bohol Email: Gcgmmc.bacmedsurglabsupplies@gmail.com Tel. No.: (038) 411-4868 To 69 Local 286 Cel. No.: +63 9171469712 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: Philgeps Website Http://www.philgeps.gov.ph Gcgmmc Website Https://www.gcgmh.gov.ph Approved: Flor Annabelle B. Cesar, Rn, Man (sgd) Bac Chairperson (medical/surgical/laboratory Supplies) Noted: Miguelito S. Jayoma, Md, Fpcs, Fpsgs, Mhm (sgd) Medical Center Chief Ii Head Of Procuring Entity (hope) *_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_ S/n Stock / Property No. Unit Item Qty Unit Cost Total Cost Anesthesia Supplies 1 0004 Pc Anesthesia Breathing Circuit, Adult 450 1,000.00 450,000.00 2 0006 Pc Anesthesia Breathing Circuit, Pedia 5 1,000.00 5,000.00 3 0005 Pc Anesthesia Breathing Circuit, Neonate 5 1,000.00 5,000.00 4 0693 Pc Anesthesia Vent Mask Adult Large Size 5 5 500.00 2,500.00 5 0694 Pc Anesthesia Vent Mask Adult Medium Size 5 5 500.00 2,500.00 6 0695 Pc Anesthesia Vent Mask Adult Small 5 500.00 2,500.00 7 0696 Pc Anesthesia Vent Mask Child Size 4 5 500.00 2,500.00 8 0697 Pc Anesthesia Vent Mask Infant Size 3 5 500.00 2,500.00 9 0698 Pc Anesthesia Vent Mask Neonate Size 2 5 500.00 2,500.00 10 0699 Pc Anesthesia Vent Mask Toddler Size 1 5 650.00 3,250.00 11 1223 Pc Arterial Line Transducer Compatible With Ge Cardiac Monitor 5 2,000.00 10,000.00 12 1220 Pc Bp Cuff Adult With Inflation Bag Compatible For Ge Cardiac Monitor 2 1,000.00 2,000.00 13 1221 Pc Bp Cuff Pedia With Inflation Bag Compatible For Ge Cardiac Monitor 2 1,000.00 2,000.00 14 0040 Pc Carbon Dioxide Absorber 6 10,000.00 60,000.00 15 Pc Spinal Needle G. 25 3,500 200.00 700,000.00 16 0035 Pc Disposable Anesthesia Gas Sampling Line, Male/male Luer 3m/10ft, Material Pvc/peid 1.2, 10’s 1 10,000.00 5,000.00 17 1211 Pc Disposable Pulse Oximeter Probe Adult Compatible With Ge Cardiac Monitor 2 1,000.00 2,000.00 18 1222 Donut Pillow For Head Stabilization 2 1,000.00 2,000.00 19 0775 Pc End-tidal Co2 Nasal Cannula Sampling Line Compatible With Ge Machine 2 3,500.00 7,000.00 20 0333 Pc Epidural Set 300 1,500.00 450,000.00 21 1209 Pc Jackson Rees Circuit 0.5l With Apl Valve 5 3,000.00 15,000.00 22 0790 Pc Nasal Airway Size 6 2 500.00 1,000.00 23 0791 Pc Nasal Airway Size 7 2 500.00 1,000.00 24 1210 Pc Nebulization Kit Compatible With Breathing Circuit For Anesthesia Machine 5 500.00 2,500.00 25 0632 Pc Pressure Infuser Inflatable With Bulb And Regulator 5 2,000.00 10,000.00 26 1212 Pc Supraglottic Airway Supreme With Gastric Port Size 1 2 5,000.00 10,000.00 27 1213 Pc Supraglottic Airway Supreme With Gastric Port Size 1.5 2 5,000.00 10,000.00 28 1214 Pc Supraglottic Airway Supreme With Gastric Port Size 2 2 5,000.00 10,000.00 29 1215 Pc Supraglottic Airway Supreme With Gastric Port Size 2.5 2 5,000.00 10,000.00 30 0657 Pc Supraglottic Airway Supreme With Gastric Port Size 3 2 5,000.00 10,000.00 31 0658 Pc Supraglottic Airway Supreme With Gastric Port Size 4 2 5,000.00 10,000.00 32 0659 Pc Supraglottic Airway Supreme With Gastric Port Size 5 2 5,000.00 10,000.00 33 1216 Tube Endotracheal Double Lumen Size 35 Left 5 7,000.00 35,000.00 34 0827 Pc Tube Endotracheal Double Lumen Size 37 Left 5 7,000.00 35,000.00 35 0300 Pc Tube Endotracheal Introducer Atraumatic Round Tipped With Markings Fr. 14-15 5 400.00 2,000.00 36 1218 Pc Tube Endotracheal Introducer Bougie Curved Fr. 10 5 1,500.00 7,500.00 37 1219 Pc Tube Endotracheal Introducer Bougie Curved Fr. 14 5 1,500.00 7,500.00 38 1196 Pc Tube Endotracheal Reinforced/armored Size 3.0 5 1,200.00 6,000.00 39 1197 Pc Tube Endotracheal Reinforced/armored Size 3.5 5 1,200.00 6,000.00 40 1198 Pc Tube Endotracheal Reinforced/armored Size 4.0 5 1,200.00 6,000.00 41 1199 Pc Tube Endotracheal Reinforced/armored Size 4.5 5 1,200.00 6,000.00 42 1200 Pc Tube Endotracheal Reinforced/armored Size 5.0 5 1,200.00 6,000.00 43 1201 Pc Tube Endotracheal Reinforced/armored Size 5.5 5 1,200.00 6,000.00 44 1202 Pc Tube Endotracheal Preformed South Size 3.0 5 400.00 2,000.00 45 1203 Pc Tube Endotracheal Preformed South Size 3.5 5 400.00 2,000.00 46 1204 Pc Tube Endotracheal Preformed South Size 4.0 5 400.00 2,000.00 47 1205 Pc Tube Endotracheal Preformed South Size 4.5 5 400.00 2,000.00 48 1206 Pc Tube Endotracheal Preformed North Size 6.5 5 400.00 2,000.00 49 1207 Pc Tube Endotracheal Preformed North Size 7.0 5 400.00 2,000.00 50 1208 Pc Tube Endotracheal Preformed North Size 7.5 5 400.00 2,000.00 51 0452 Pc Ug Peripheral Nerve Block 5 6,000.00 30,000.00 52 1195 Pc Ultrasound Probe Sterile Condom Cover 5 50.00 250.00 Sub-total 1,985,000.00 Geriatric 53 1117 Box Adhesive Silicone Hydrofiber Foam Dressing With Ionic Silver Size 12.5x12.5cm, 10's 10 9,500.00 95,000.00 54 1106 Box Dressing Adhesive Hydrofiber Foam 12.5 X 12.5cm, 10's 10 5,000.00 50,000.00 55 0520 Box Dressing Hydrocolloid Controlled Gel Formula 10x10cm, 10's 100 1,500.00 150,000.00 56 0098 Box Dressing Hydrocolloid Extra Thin 10x10cm, 10's 250 1,600.00 400,000.00 57 1105 Box Dressing Non-adhesive Hydrofiber Foam 10cm X 10cm, 10's 10 3,500.00 35,000.00 58 1107 Box Dressing Non-adhesive Hydrofiber Foam Dressing Size 8"x8"(20cmx20cm), 5's 20 6,000.00 120,000.00 59 1108 Box Dressing Adhesive Hydrofiber Foam 21x21cm, 5's 20 7,000.00 140,000.00 60 1115 Box Enhanced Hydrofiber Dressing With Ionic Silver And Strengthening Fibre With Antibiofilm Size 2x45cm Rope, 5's 20 9,500.00 190,000.00 61 1116 Box Enhanced Hydrofiber Dressing With Ionic Silver And Strengthening Fibre With Antibiofilm Size 2x45 Cm Rope, 5's 20 4,500.00 90,000.00 62 1109 Box Latex Safe Tubular Bandage For Fingers, Toes (approximate Circumference 3"-8"), 10yds 10 900.00 9,000.00 63 1110 Box Latex Safe Tubular Bandage For Fingers, Wrist Small Hand (approximate Circumference 8-11"), 10yds 9m 10 1,000.00 10,000.00 64 1111 Box Latex Safe Tubular Bandage For Hand,elbow, Foot (approximate Circumference 11-16"), 10yds 9m 10 1,100.00 11,000.00 65 1112 Box Latex Safe Tubular Bandage For Hand,elbow, Foot & Knee (approximate Circumference 11-16"), 10yds 9m 10 1,100.00 11,000.00 66 1113 Box Latex Safe Tubular Bandage For Small Chest And Axilla (approximate Circumference 26-25"), 10yds 9m 10 1,600.00 16,000.00 67 1114 Box Latex Safe Tubular Bandage For Chest, Axilla & Abdomen (approxiamate Circumference 52-58"), 10yds 9m 10 3,300.00 33,000.00 Sub-total 1,360,000.00 Intravenous Supplies 68 0204 Pc 0.9% Sodium Chloride In 10ml Syringe, Sterile 4,500 60.00 270,000.00 69 0202 Pc 0.9% Sodium Chloride In 03ml Syringe, Sterile 9,000 60.00 540,000.00 70 0203 Pc 0.9% Sodium Chloride In 05ml Syringe, Sterile 4,500 60.00 270,000.00 71 0320 Pc Blood Transfusion Set 210u Filter, Double Chamber, Airvent Slip Type Gravity 3,000 100.00 300,000.00 72 0314 Pc Intravenous Catheter G. 18 With Integrated Hard Plastic Safety Clip With Snap Fit Cap Port And Perforated Wing 9,500 80.00 760,000.00 73 0315 Pc Intravenous Catheter G. 20 With Integrated Hard Plastic Safety Clip With Snap Fit Cap Port And Perforated Wing 9,000 80.00 720,000.00 74 0316 Pc Intravenous Catheter G. 22 With Integrated Hard Plastic Safety Clip With Snap Fit Cap Port And Perforated Wing 9,500 80.00 760,000.00 75 0417 Pc Intravenous Catheter G. 24 With Integrated Hard Plastic Safety Clip With Snap Fit Cap Port And Perforated Wing 6,000 80.00 480,000.00 76 0317 Pc Intravenous Catheter G. 26 With Integrated Hard Plastic Safety Clip With Snap Fit Cap Port And Perforated Wing 6,000 80.00 480,000.00 77 0152 Pc Iv Splint Neonate 300 70.00 21,000.00 78 0153 Pc Iv Starter Kit: 1-pc 70% Isopropyl Alcohol Swab 1-pc Latex-free, Polyisoprene Synthetic Blue Rubber Tourniquet 1-pc Sterile Transparent Dressing 1-pc Intravenous Site Label 1-roll Easy-to-tear Hypoallergenic Plaster 2-pcs 2x2 Inches Sterile Gauze 1-pc Film Dressing Note: Sterility And Product Expiry Should Be Clearly Stated On The Label 15,000 160.00 2,400,000.00 79 0730 Pc Iv Wrist Support Adult Large 3,000 70.00 210,000.00 80 0154 Pc Iv Wrist Support, Adult-medium 900 70.00 63,000.00 81 0346 Pc Iv Wrist Support, Adult-small 900 70.00 63,000.00 82 0155 Pc Iv Wrist Support, Pedia-meduim 900 70.00 63,000.00 83 0319 Pc Microset 4,000 150.00 600,000.00 84 1065 Pc Platelet Set 500 100.00 50,000.00 85 0185 Pc Needle-free Port Adaptor Straight Fluid 10,500 60.00 630,000.00 86 0243 Pc Stopcock 3-way Disposable With Extension Tubing 4,000 150.00 600,000.00 87 0426 Pc Tube Extension Octopus Triple Lumen, At Least 10cm Length With Needle-free Connector 1,500 500.00 750,000.00 88 0341 Pc Tube Extension Set Double Lumen (2-way), 15cm Macrob Ore With Luer Lock Needle-free Split Septum Adapter With Sliding Clamp Latex-free 1,500 300.00 450,000.00 89 0290 Pc Tube Extension For Syringe Pump 105cm 2,000 250.00 500,000.00 90 0286 Pc Tube Extension For Syringe Pump 75cm 500 250.00 125,000.00 91 0318 Pc Vented Macro Gravity Administration Set With Anti-run Dry And Auto Prime Mechanism With Needle Free Access Y-site Port With Pinch Clamp 10,500 200.00 2,100,000.00 92 0420 Pc Volumetric Set 60 Drip/ml Burette Volume 100-120ml Gravity Type With Air Vent Needle 240cm Length Dehp Free Tubing Material Luer Lock 11,000 200.00 2,200,000.00 Sub-total 15,405,000.00 Neurosurgery Supplies 93 0471 Pc Bipolar Forceps, Adjustable Dissecting Force, Non-stick Bayonet 19cm With Solid Silver Tip 0.7mm, Disposable 5 75,000.00 375,000.00 94 0472 Pc Bipolar Forceps, Adjustable Dissecting Force, Non-stick Bayonet 19cm With Solid Silver Tip 1.0mm, Disposable 5 75,000.00 375,000.00 95 0473 Pc Bipolar Forceps, Irrigation Bayonet 22cm With Solid Silver Tip 0.7mm, Disposable 2 75,000.00 150,000.00 96 0474 Pc Bipolar Forceps, Irrigation Bayonet 22cm With Solid Silver Tip 1.0mm, Disposable 2 75,000.00 150,000.00 End-users Agreement 1. Delivery Timeframe: Items Must Be Delivered Within 10 Days Of The Order Placement To Ensure Timely Receipt By The End-user. 2. Defective Item Replacement: In The Event Of Reported Defective Items, The Supplier Is Responsible For Promptly Replacing Them To Ensure Safety And Quality. 3. Product Expiration Exchange: The Institution Must Be Permitted To Exchange Products Approaching Expiration, Up To A Minimum Of 3 Months Before The Expiry Date, To Maintain Product Quality And Effectiveness With No Validity Period, Allowing The Institution To Maintain Optimal Inventory Quality. 4. Guarantee Letter: A Guarantee Letter Supporting The End-user Requirements Specified In Points 2 And 3 Must Be Provided, Ensuring Accountability And Assurance From The Supplier. 5. Certificate Of Compliance: A Certificate Of Product Registration (cpr)/certificate Of Renewal/certificate Of Medical Device Notification (cmdn) Must Be Included, Validating The Product's Compliance With Regulatory Standards. 6. Product Evaluation Period: The Supplied Item Shall Undergo Thorough Assessment And Verification Through Product Evaluation In The Institution Over A Six-month Validity Period To Ensure Sustained Quality Assurance And Effectiveness For The End-user. 6. Product Evaluation Period: The Supplied Item Shall Undergo Thorough Assessment And Verification Through Product Evaluation In The Institution Over A Six-month Validity Period To Ensure Sustained Quality Assurance And Effectiveness For The End-user. 7. Supplier Evaluation Requirement: The Supplier Must Have Achieved A Minimum Csr Supplier Evaluation Score Of 4 (very Satisfactory) Or Higher For The Period Of January To June 2024 To Be Considered For Contract Award. 8. New Items Requirement: All Delivered Items Must Be Brand New And Not Reprocessed. Sub-total 1,050,000.00 Respiratory Therapy Unit 97 Pc Air Filter Compatible With Fisher & Paykel Airvo Model 30 3,500.00 105,000.00 98 0009 Pc Bacterial/viral Filter Compatible With Mechanical Ventilator 900 250.00 225,000.00 99 Pc Full Face Mask For Bpap, Vented, Large 10 8,000.00 80,000.00 100 Pc Full Face Mask For Bpap, Vented, Medium 10 8,000.00 80,000.00 101 Pc Full Face Mask For Bpap, Vented, Small 10 8,000.00 80,000.00 102 1169 Pc Full-face Mask With Nasogastric Tube Sealing For Non-invasive Ventilation Size Xs 15 7,000.00 105,000.00 103 1168 Pc Full-face Mask With Nasogastric Tube Sealing For Non-invasive Ventilation Size Small 30 7,000.00 210,000.00 104 1167 Pc Full-face Mask With Nasogastric Tube Sealing For Non-invasive Ventilation Size Medium 60 7,000.00 420,000.00 105 1166 Pc Full-face Mask With Nasogastric Tube Sealing For Non-invasive Ventilation Size Large 15 7,000.00 105,000.00 106 0441 Pc Heated Moisture Exchange Filter With Luer Lock Port And Super Catheter Mount And Elbow 300 300.00 90,000.00 107 0036 Kit High Flow Nasal Cannula Adult-large Tube And Chamber Kit Compatible With Fisher & Paykel Airvo Model (contents: Single Heated Circuit, Elbow, Chamber, Nasal Cannula) 30 9,000.00 270,000.00 108 0037 Kit High Flow Nasal Cannula Adult-medium Tube And Chamber Kit Compatible With Fisher & Paykel Airvo Model (contents: Single Heated Circuit, Elbow, Chamber, Nasal Cannula) 30 9,000.00 270,000.00 109 0476 Kit High Flow Nasal Cannula Adult-small Tube And Chamber Kit Compatible With Fisher & Paykel Airvo Model (contents: Single Heated Circuit, Elbow, Chamber, Nasal Cannula) 30 9,000.00 270,000.00 110 Pc High Flow Nasal Cannula For Neonate, Nippv, Xxs 50 500.00 25,000.00 111 Pc High Flow Nasal Cannula For Neonate, Nippv, Xs 50 500.00 25,000.00 112 Pc High Flow Nasal Cannula For Neonate, Nippv, Small 50 500.00 25,000.00 113 Pc High Flow Nasal Cannula For Neonate, Nippv, Medium 50 500.00 25,000.00 114 Pc High Flow Nasal Cannula For Neonate, Nippv, Larg 50 500.00 25,000.00 115 Pc Heated Tube And Humidification Chamber For High Flow Machine Adult-large Compatible With Comed 50 7,000.00 350,000.00 116 Pc Heated Tube And Humidification Chamber For High Flow Machine Adult-medium Compatible With Comed 50 7,000.00 350,000.00 117 Pc Heated Tube And Humidification Chamber For High Flow Machine Adult-small Compatible With Comed 50 7,000.00 350,000.00 118 Pc Niv Face Mask Non-vented, Large 50 5,000.00 250,000.00 119 Pc Niv Face Mask Non-vented, Medium 50 5,000.00 250,000.00 120 Pc Niv Face Mask Non-vented, Small 50 5,000.00 250,000.00 121 Pc Tracheal Mask 150 150.00 22,500.00 122 0311 Set Tubing Ventilator Complete Set, Adult Contents: Adult Breathing Circuit With 2 Water Traps, 2 Bacterial Filters, 1hmef, 1 Disposable Catheter Mount, 1 Auto-fill Chamber 750 2,000.00 1,500,000.00 123 0312 Set Tubing Ventilator Complete Set, Neonate Contents: Neonate Breathing Circuit With 2 Water Traps, 2 Bacterial Filters, 1hmef, 1 Disposable Catheter Mount, 1 Auto-fill Chamber 150 2,000.00 300,000.00 124 0313 Set Tubing Ventilator Complete Set, Pedia Contents: Pedia Breathing Circuit With 2 Water Traps, 2 Bacterial Filters, 1hmef, 1 Disposable Catheter Mount, 1 Auto-fill Chamber 300 2,000.00 600,000.00 125 0713 Set Weaning Set For Ventilator Machine 60 1,000.00 60,000.00 Sub-total 6,717,500.00 Medical Gases 126 0170 Cyl Medical Grade Carbon Dioxide 6 7,000.00 42,000.00 127 0171 Cyl Medical Grade Compressed Air 60 700.00 42,000.00 128 0172 Cyl Medical Grade Oxygen Refill 31,200 700.00 21,840,000.00 129 0173 Cyl Medical Grade Oxygen Refill For Portable 3,000 700.00 2,100,000.00 End-users Agreement: 1. Delivery Timeframe: Items Must Be Delivered Within 10 Days Of The Order Placement To Ensure Timely Receipt By The End-user. 2. Defective Item Replacement: In The Event Of Reported Defective Items, The Supplier Is Responsible For Promptly Replacing Them To Ensure Safety And Quality. 3. Product Expiration Exchange: The Institution Must Be Permitted To Exchange Products Approaching Expiration, Up To A Minimum Of 3 Months Before The Expiry Date, To Maintain Product Quality And Effectiveness With No Validity Period, Allowing The Institution To Maintain Optimal Inventory Quality. 4. Guarantee Letter: A Guarantee Letter Supporting The End-user Requirements Specified In Points 2 And 3 Must Be Provided, Ensuring Accountability And Assurance From The Supplier. 5. Certificate Of Compliance: A Certificate Of Product Registration (cpr)/certificate Of Renewal/certificate Of Medical Device Notification (cmdn) Must Be Included, Validating The Product's Compliance With Regulatory Standards. 6. Product Evaluation Period: The Supplied Item Shall Undergo Thorough Assessment And Verification Through Product Evaluation In The Institution Over A Six-month Validity Period To Ensure Sustained Quality Assurance And Effectiveness For The End-user. 7. Supplier Evaluation Requirement: The Supplier Must Have Achieved A Minimum Csr Supplier Evaluation Score Of 4 (very Satisfactory) Or Higher For The Period Of January To June 2024 To Be Considered For Contract Award. 8. New Items Requirement: All Delivered Items Must Be Brand New And Not Reprocessed. Sub-total 24,024,000.00 Reprocessing Unit For Medical Devices 130 0014 Amp Biological Indicator Compatible With Matachana High Temperature Machine 1,200 500.00 600,000.00 131 0013 Amp Biological Indicator Compatible With Ethylene Oxide (c2h4o) Machine 60 500.00 30,000.00 132 0015 Amp Biological Indicator Compatible With Matachana Plasma (h202) Machine 600 1,000.00 600,000.00 133 0022 Box Bowie And Dick Type Test Pack, 134 Degrees Celsius 3.5minutes, 20's 10 12,000.00 120,000.00 134 0477 Pack External Indicator Label Compatible With Aesculap Rigid Container 1000's/pack 6 20,000.00 120,000.00 135 0339 Box External Indicator Tape Compatible With Matachana Plasma (h202), 25cmx25m, 20 Rolls/box 6 34,000.00 204,000.00 136 0370 Roll External Indicator Tape For High Temperature Sterilizer 1 Inch 360 300.00 108,000.00 137 0420 Sack Industrial Salt 60 500.00 30,000.00 138 0151 Gal Instrument Detergent Enzymatic 5l 12 3,500.00 42,000.00 139 0153 Gal Instrument Disinfectant 0.55%-0.60% Orthophthaldehyde, 5l 12 2,000.00 24,000.00 140 0396 Bot Instrument Lubricant, Paraffin Liquid Of Pharmaceutical Grade, Non-ionic Surfactants 6 1,600.00 9,600.00 141 0155 Pack Internal Chemical Indicator Strip Class 5 For High Temperature Sterilization 50's 600 1,200.00 720,000.00 142 0589 Pack Internal Chemical Indicator Strip For Eo (c2h4o), 50's 6 500.00 3,000.00 143 0337 Pack Internal Chemical Indicator Strip For For Plasma (h202), 250's 3 30,000.00 90,000.00 144 0384 Roll Paper-plastic Peel Pouch 03” Flat 200m/roll 6 1,000.00 6,000.00 145 0385 Roll Paper-plastic Peel Pouch 04'' Flat, 200m/roll 6 1,000.00 6,000.00 146 0802 Roll Paper-plastic Peel Pouch 06'' Flat, 200m/roll 6 3,500.00 21,000.00 147 0386 Roll Paper-plastic Peel Pouch 08” Flat, 200meter/roll 6 3,500.00 21,000.00 148 0387 Roll Paper-plastic Peel Pouch 10” Flat, 200m/roll 6 4,000.00 24,000.00 149 0388 Roll Paper-plastic Peel Pouch 12” Flat, 200m/roll 6 4,000.00 24,000.00 150 0338 Box Pcd -helix + Chemical Strips For H2o2, 250 Units Per Box 2 75,000.00 150,000.00 151 0449 Gal Reagent Compatible With Matachana Washer Disinfector, Enzymatic Detergent 6 5,000.00 30,000.00 152 0447 Gal Reagent Compatible With Matachana Washer Disinfector, Maximum Ph Alkaline 6 5,000.00 30,000.00 153 0448 Gal Reagent Compatible With Matachana Washer Disinfector, Sequel Rinse Aid, Acid-free 6 5,000.00 30,000.00 154 0505 Pack Reusable Filter Compatible With Aesculap Rigid Container, 10's/pack 10 20,000.00 200,000.00 155 1084 Roll Reusable Filter Compatible With Aygon Rigid Container, 10's/pack 1 20,000.00 20,000.00 156 0369 Pc Sterilant Compatible With Ethylene Oxide (c2h4o) Machine 100 4,000.00 400,000.00 157 0336 Pc Sterilant Reagent Compatible With Matachana Plasma (h202) In Hdpe Container 100 30,000.00 3,000,000.00 158 0719 Pc Sterilization Wrap (spunbond Meltdown Spunbond), 120x120cm 6,000 50.00 300,000.00 159 0244 Pc Sterilization Wrap (spunbond Meltdown Spunbond), 45x45cm 6,000 30.00 180,000.00 160 0245 Pc Sterilization Wrap (spunbond Meltdown Spunbond), 50x50cm 6,000 35.00 210,000.00 161 0246 Pc Sterilization Wrap (spunbond Meltdown Spunbond), 60x60cm 6,000 40.00 240,000.00 162 0247 Pc Sterilization Wrap (spunbond Meltdown Spunbond), 75x75cm 6,000 45.00 270,000.00 163 0684 Bx Tamper Proof Lock With Process Indicator For Steam Sterilization Compatible With Aesculap Rigid Containers, 1000’s 6 50,000.00 300,000.00 164 0723 Roll Thermal Paper For Compatible With Matachana Machine 60 X57.5 M 300 1,000.00 300,000.00 165 0340 Roll Tyvek Rolls 03", For Sterilization Process By Hydrogen Peroxide With External Process Indicator For H2o2, With Color Change 6 3,000.00 18,000.00 166 0342 Roll Tyvek Rolls 06", For Sterilization Process By Hydrogen Peroxide With External Process Indicator For H2o2, With Color Change 6 6,000.00 36,000.00 167 0343 Roll Tyvek Rolls 08", For Sterilization Process By Hydrogen Peroxide With External Process Indicator For H2o2, With Color Change, 200mmx70m 6 10,000.00 60,000.00 168 0344 Roll Tyvek Rolls 10", For Sterilization Process By Hydrogen Peroxide With External Process Indicator For H2o2, With Color Change, 200mmx70m 6 12,000.00 72,000.00 169 0345 Roll Tyvek Rolls 12", For Sterilization Process By Hydrogen Peroxide With External Process Indicator For H2o2, With Color Change, 300mmx70m 6 17,000.00 102,000.00 170 0749 Roll Tyvek Rolls 16", For Sterilization Process By Hydrogen Peroxide With External Process Indicator For H2o2, With Color Change, 500mmx70m 6 35,000.00 210,000.00 Sub-total 8,960,600.00 Orthopedic Surgery 171 0510 Roll Bandage Elastic 2inches X 5yards 900 50.00 45,000.00 172 0010 Roll Bandage Elastic 4inches X 5yards 3,000 50.00 150,000.00 173 0011 Roll Bandage Elastic 6inches X 5yards 3,000 50.00 150,000.00 174 1074 Roll Bandage Esmarch 4 Inches X 2.5meters 10 1,000.00 10,000.00 175 1075 Roll Bandage Esmarch 6 Inches X 2.5meters 10 1,000.00 10,000.00 176 1178 Roll Fibercast 4 Inches 100 500.00 50,000.00 177 1179 Roll Fibercast 6 Inches 100 500.00 50,000.00 178 0511 Roll Plaster Of Paris 4 X 5yd 900 50.00 45,000.00 179 0512 Roll Plaster Of Paris 6 X 5yd 900 50.00 45,000.00 180 1175 Pc Suture Anchors 2.9mm 20 2,500.00 50,000.00 181 1176 Pc Suture Anchors 5.0mm 20 2,500.00 50,000.00 182 1076 Pc Suture, Monofilament Polypropylene, 0, 40mm-mayo 2 Needle, 100cm 180 1,000.00 180,000.00 183 1077 Pc Suture, Monofilament Polypropylene, 4, 40mm-mayo 2 Needle, 100cm 180 1,000.00 180,000.00 184 1182 Pc Suture Wire Polyblend Braided With Needle 90 2,000.00 180,000.00 185 0012 Roll Wadding Sheet 4inches X 5yards 1,200 30.00 36,000.00 186 0451 Roll Wadding Sheet 6inches X 5yards 4,000 30.00 120,000.00 Sub-total 1,351,000.00 Operating Room 187 0001 Pc Abdominal Lap Sponge 12x12 With Loop, Sterile, Individually Packed 1,500 100.00 150,000.00 188 0016 Box Blade Surgical No. 10, 100's 50 100.00 5,000.00 189 0017 Box Blade Surgical No. 11, 100's 50 100.00 5,000.00 190 0514 Box Blade Surgical No. 12, 100's 1 100.00 100.00 191 0018 Box Blade Surgical No. 15, 100's 50 100.00 5,000.00 192 0019 Box Blade Surgical No. 20, 100's 50 100.00 5,000.00 193 0020 Box Blade Surgical No. 22, 100's 50 100.00 5,000.00 194 0021 Pc Bone Wax 300 300.00 90,000.00 195 0501 Pc Cadexomer Iodine 100% Containing 0.9% Iodine, 3grams 300 700.00 210,000.00 196 0033 Box Camera Cover, Plastic Sterile, 50's 1 35,000.00 35,000.00 197 0442 Pc Catheter Locking Solution 30% Pre-filled, 5ml 1,000 500.00 500,000.00 198 0068 Pc Catheter Vascular 12f X 20-26cm, Curved Duo Split Triple Lumen 500 3,500.00 1,750,000.00 199 0913 Pc Catheter Vascular 12f X 15-16cm, Curved Duo Split Triple Lumen 700 3,500.00 2,450,000.00 200 0078 Pc Cautery Electrosurgical Pencil Standard 70mm Blade, Button Switch 3,600 500.00 1,800,000.00 201 0076 Pc Cautery Pad With Solid Gel, Foam Support With At Least 300cm Non Detachable Cable Connector Compatible With Covidien Machine, Adult 3,000 500.00 1,500,000.00 202 0077 Pc Cautery Pad With Solid Gel, Foam Support With At Least 300cm Non Detachable Cable Connector Compatible With Covidien Machine, Neonate 10 600.00 6,000.00 203 0075 Pc Cautery Pads With Solid Gel, Foam Support, At Least 202x101mm With 300cm Non-detachable Cable Connector, Pedia 10 600.00 6,000.00 204 0144 Pc Hemostatic Gelatine Sponge 300 500.00 150,000.00 205 0145 Pc Hemostatic Oxidized Regenerated Cellulose 3 X 4” 300 2,500.00 750,000.00 206 0161 Pack Laparotomy Pack: (5) Surgical Gown Medium-large Size, (1) Mayo Stand Cover At Least 60x140cm, (1) Square Of Drape With Adhesive At Least 75x90cm, (1) Laparotomy Drape At Least 270x320x330cm, (1) Back Table Cover At Least 150x200cm, (5) Hand Towel At Least 40x40cm, Sterile 1,800 2,000.00 3,600,000.00 207 Pack Lithotomy Pack: (4) Surgical Gown Medium-large Size, (1) Mayo Stand Cover At Least 60x140cm, (2) Legging Peridrape (1) Baby Wrap Drape At Least 90x90cm, (1) Ob Drape Collection Pouch At Least 110x120cm, (1) Back Table Cover At Least 150x200cm, (5) Towel At Least At Least 40x40cm, Sterile 1,000 2,500.00 2,500,000.00 208 0162 Pc Ligating Clip Cartridge Medium-large 6 Clips In1 Cartridge With Applier 180 2,100.00 378,000.00 209 Pc Marker Dual Tip Ink Permanent Skin Marker 60 500.00 30,000.00 210 0164 Box Mask Face 3-ply Disposable Tie-on, 50's 900 500.00 450,000.00 211 0180 Pc Mesh Polypropylene 15cm X 15cm 60 2,500.00 150,000.00 212 0179 Pc Mesh Polypropylene 30-35cm X 30-35cm 6 3,000.00 18,000.00 213 0181 Pc Mesh Polypropylene 7.5cm X 15cm 60 2,500.00 150,000.00 214 0195 Pc Penrose Drain 1/2 X 18 50 300.00 15,000.00 215 0625 Pc Penrose Drain 1/4’ X 18 50 300.00 15,000.00 216 0196 Pc Penrose Drain 1” X 18 50 300.00 15,000.00 217 0211 Gal Povidone Antiseptic 10% 60 2,000.00 120,000.00 218 0212 Gal Povidone Cleanser 7.5% 60 2,000.00 120,000.00 219 0219 Pc Saw Gigli 15 1,500.00 22,500.00 220 0397 Pc Silicone Flat Drain System 150cc-200cc Reservoir 360 1,200.00 432,000.00 221 0228 Bot Skin Disinfectant: Propan-2-ol Benzalkonium Chloride, 1 Liter 600 2,000.00 1,200,000.00 222 0229 Bot Skin Disinfectant: Propan-2-ol Benzalkonium Chloride, 250ml 150 1,500.00 225,000.00 223 0231 Pc Skin Stapler, With Stapler Remover Every 50 Pcs 500 700.00 350,000.00 224 0234 Pc Stapler 3d Linear Cutter 75mm Reload 75 3,000.00 225,000.00 225 0235 Unit Stapler 3d Linear Cutter (55mm) 10 15,000.00 150,000.00 226 0236 Pc Stapler 3d Linear Cutter 55mm Reload 75 3,000.00 225,000.00 227 0254 Pc Suction Set Poole Drain With Yankeur Tip Suction Handle, With Thumb Control Vent 2,000 300.00 600,000.00 228 0282 Pc Suture, Chromic, 0 37mm 1/2c. Atraumatic 36 250.00 9,000.00 229 0839 Pc Suture, Chromic, 1-0 40mm 1/2c. Atraumatic 36 250.00 9,000.00 230 0283 Pc Suture, Chromic, 2-0 26mm 1/2c. Atraumatic 36 250.00 9,000.00 231 0284 Pc Suture, Chromic, 3-0 26mm 1/2c. Atraumatic 36 250.00 9,000.00 232 0819 Pc Suture, Chromic, 4-0 17mm 1/2c. Atraumatic 36 250.00 9,000.00 233 0286 Pc Suture, Chromic, 5-0 17mm 1/2c. Atraumatic 36 250.00 9,000.00 234 0846 Pc Suture, Endoscopic Loop Ligature, Polyglactin 0, 3.5m, 18" 45cm 36 500.00 18,000.00 235 0258 Pc Suture, Glyconate/polyglycaprone 25 Absorbable, Monofilament, 4-0, 19mm 3/8c. Atraumatic Size 72 600.00 43,200.00 236 0257 Pc Suture, Glyconate/polyglycaprone 25 Absorbable, Monofilament, 4-0, 19mm 3/8c. Cutting Size 36 600.00 21,600.00 237 0260 Pc Suture, Glyconate/polyglycaprone 25 Absorbable, Monofilament, 5-0, 13mm 3/8c. Atraumatic Size 72 600.00 43,200.00 238 0259 Pc Suture, Glyconate/polyglycaprone 25 Absorbable, Monofilament, 5-0, 13mm 3/8c. Cutting Size 36 600.00 21,600.00 239 0264 Pc Suture, Monofilament Absorbable Poly-4-hydroxybutrate, C.1/2, 37mm, 90cm Size 0 72 1,000.00 72,000.00 240 0265 Pc Suture, Monofilament Polyamide, 3-0, 19-24mm 3/8c., Cutting 648 300.00 194,400.00 241 0266 Pc Suture, Monofilament Polyamide, 4-0, 19-24mm 3/8c., Cutting 1,260 300.00 378,000.00 242 0267 Pc Suture, Monofilament Polyamide, 5-0, 11-13mm 3/8c., Reverse Cutting 1,044 300.00 313,200.00 243 0268 Pc Suture, Monofilament Polyamide, 6-0, 11-13mm 3/8c., Reverse Cutting 36 400.00 14,400.00 244 0946 Pc Suture, Polydiaxanone Monofilament Absorbable 0, 90cm With 36mm 720 600.00 432,000.00 245 0946 Pc Suture, Polydiaxanone Monofilament Absorbable 1, 90cm With 36mm 720 600.00 432,000.00 246 0948 Pc Suture, Monofilament Polyamide 6, Non-absorbable 4-0, 45cm, With Plastic Surgery Prime Needle 36 600.00 21,600.00 247 0949 Pc Suture, Monofilament Polyamide 6, Non-absorbable 6-0, 45cm, With 16mm Precision Cosmetic Needle 36 600.00 21,600.00 248 0950 Pc Suture, Monofilament Polyamide 6, Non-absorbable 5-0, 45cm, With 16mm Precision Cosmetic Needle 36 600.00 21,600.00 249 0951 Pc Suture, Monofilament Polyamide 6, Non-absorbable 4-0, 45cm, With 19mm For Skin 2 Needle 36 600.00 21,600.00 250 Suture, Monofilament Polyamide, Non-absorbable 9-0, 5.1mm, 3/8c., Atraumatic 36 700.00 25,200.00 251 0269 Pc Suture, Monofilament Polypropylene, 0, 40mm 1/2c., Atraumatic 360 600.00 216,000.00 252 0407 Pc Suture, Monofilament Polypropylene, 1, 40mm 1/2c., Atraumatic 36 600.00 21,600.00 253 0270 Pc Suture, Monofilament Polypropylene, 2-0, 31mm 1/2c., Atraumatic 1,080 600.00 648,000.00 254 0271 Pc Suture, Monofilament Polypropylene, 3-0, 17mm 1/2c., Atraumatic 1,332 600.00 799,200.00 255 0272 Pc Suture, Monofilament Polypropylene, 4-0, 17mm 1/2c., Atraumatic 720 600.00 432,000.00 256 0273 Pc Suture, Monofilament Polypropylene, 5-0, 13mm 1/2c., Atraumatic 36 1,000.00 36,000.00 257 0274 Pc Suture, Monofilament Polypropylene, 6-0, 9mm 1/2c., Atraumatic 144 1,000.00 144,000.00 258 0275 Pc Suture, Monofilament Polypropylene, 7-0, 9-10mm 3/8c., Atraumatic Double Arm 36 1,500.00 54,000.00 259 0820 Pc Suture, Parynchyma Set (poly-glycolic Acid Tape) 36 1,000.00 36,000.00 260 0276 Pc Suture, Silk 0 Strand 972 200.00 194,400.00 261 0277 Pc Suture, Silk 2-0 Strand 1,368 200.00 273,600.00 262 0278 Pc Suture, Silk 3-0 Strand 1,368 200.00 273,600.00 263 0662 Pc Suture, Silk, 0, 40mm 1/2c., Atraumatic 360 200.00 72,000.00 264 0279 Pc Suture, Silk, 3-0, 22-26mm 1/2c., Atraumatic 1,800 200.00 360,000.00 265 0488 Pc Suture, Silk, 3-0, 22-26mm 1/2c., Cutting 612 300.00 183,600.00 266 0280 Pc Suture, Silk, 4-0, 22-26mm 1/2c., Atraumatic 360 400.00 144,000.00 267 0821 Pc Suture, Silk, 4-0, 22-26mm 1/2c., Cutting 36 400.00 14,400.00 268 0281 Pc Suture, Silk, 5-0, 17-22mm 3/8c., Atraumatic 36 500.00 18,000.00 269 0287 Pc Suture, Synthetic Absorbable Polyglycolic/polyglactin, 0, 36mm 1/2c. Atraumatic 7,200 400.00 2,880,000.00 270 0400 Pc Suture, Synthetic Absorbable Polyglycolic/polyglactin, 1, 40mm 1/2c. Atraumatic 7,200 400.00 2,880,000.00 271 0288 Pc Suture, Synthetic Absorbable Polyglycolic/polyglactin, 2-0, 37mm 1/2c. Atraumatic 6,012 400.00 2,404,800.00 272 0822 Pc Suture, Synthetic Absorbable Polyglycolic/polyglactin, 3-0, 26mm 1/2c., Atraumatic 3,600 500.00 1,800,000.00 273 0289 Pc Suture, Synthetic Absorbable Polyglycolic/polyglactin, 3-0, 26mm 1/2c., Cutting 1,800 500.00 900,000.00 274 0290 Pc Suture, Synthetic Absorbable Polyglycolic/polyglactin, 4-0, 22mm 1/2c., Atraumatic 1,296 600.00 777,600.00 275 0291 Pc Suture, Synthetic Absorbable Polyglycolic/polyglactin, 5-0, 17mm 3/8c., Atraumatic 180 600.00 108,000.00 276 0944 Pc Suture, Synthetic Absorbable Polyglycolic/polyglactin, 4-0, 75cm With 17mm Renal Bypass 1 Plus Needle 36 700.00 25,200.00 277 0945 Pc Suture, Synthetic Absorbable Polyglycolic/polyglactin, 3-0, 70cm With 17mm Renal Bypass 36 700.00 25,200.00 278 0952 Pc Suture, Synthetic Absorbable Polyglactin, Braided 5-0, 75cm With 17mm Renal Bypass 1 Plus Needle 36 700.00 25,200.00 279 0954 Pc Suture, Synthetic Absorbable Polyglactin Braided With Triclosan 4-0, 70 Cm With 13mm Renal Bypass-2 Needle 36 700.00 25,200.00 280 0955 Pc Suture, Synthetic Monofilament Absorbable, Polyglecaprone 25, 4-0, 70cm With 19mm Plastic Surgery-2 Needle 36 700.00 25,200.00 281 0956 Pc Suture, Synthetic Monofilament Absorbable, Polyglecaprone 25, 5-0, 45cm With 13mm Plastic Surgery-3 Needle 36 700.00 25,200.00 282 0256 Pc Topical Skin Adhesive 360 800.00 288,000.00 283 0406 Pc Trocar Bladeless With Fixation Cannula 10-11mm 150 5,000.00 750,000.00 284 0405 Pc Trocar Bladeless With Fixation Cannula 5mm 60 5,000.00 300,000.00 285 0825 Pc T-tube Sterile Fr. 16 5 1,500.00 7,500.00 286 0826 Pc T-tube Sterile Fr. 18 5 1,500.00 7,500.00 287 0836 Pc Tube Nephrostomy Set Fr. 12 5 3,000.00 15,000.00 288 0837 Pc Tube Nephrostomy Set Fr. 14 5 3,000.00 15,000.00 289 0308 Pc Tube Tracheostomy With Inner Cannula No. 4.0, Fenestrated 2 6,000.00 12,000.00 290 0832 Pc Tube Tracheostomy With Inner Cannula No. 5.0, Fenestrated 2 6,000.00 12,000.00 291 0309 Pc Tube Tracheostomy With Inner Cannula No. 6.0, Fenestrated 5 6,000.00 30,000.00 292 0833 Pc Tube Tracheostomy With Inner Cannula No. 7.0, Fenestrated 25 6,000.00 150,000.00 293 0310 Pc Tube Tracheostomy With Inner Cannula No. 8.0, Fenestrated 50 6,000.00 300,000.00 294 0687 Pc Ultrasonic Shear 17cm Length 1 50,000.00 50,000.00 295 0688 Pc Ultrasonic Shear 9cm Length 1 50,000.00 50,000.00 296 1127 Pc Ultrasonic Laparoscopic Shears With Adaptive Tissue Technology And Advance Hemostasis Mode Curved Tip 36cm 6 52,000.00 312,000.00 297 0364 Pack Uterine Pack, X-ray Detectable, 12-16ply, 10’s 1,500 500.00 750,000.00 298 0838 Pc Ureteral Stent, Standard Double J, Fr.5- 6 24cm 3 5,000.00 15,000.00 Sub-total 41,447,800.00 Ophthalmology Supplies Pc Foldable Intra-ocular Aspheric Lens 150 1,600.00 240,000.00 300 1087 Pc Ophthalmic Viscosurgical Device Sodium Hyaluronate 1.8% 1.5ml 200 1,100.00 220,000.00 301 1088 Pc Ophthalmic Viscosurgical Device Hydroxypropylmethylcellulose 2.0%, 2.0ml 200 1,500.00 300,000.00 302 0839 Pc 15 Degree Ophthalmic Stab Knife 200 4,000.00 800,000.00 303 1086 Pc 2.2mm Slit Angled Ophthalmic Knife 200 5,000.00 1,000,000.00 304 0841 Pc 2.3mm Crescent Ophthalmic Knife Bevel Up 100 5,000.00 500,000.00 305 0840 Pc 2.75mm Slit Angled Ophthalmic Knife 200 5,000.00 1,000,000.00 306 0842 Pc 23g Mvr Lance Ophthalmic Knife 100 5,000.00 500,000.00 307 0849 Box Needle Disposable Im G. 30 1/2” Preferrably With Safety Features 100’s 10 1,000.00 10,000.00 308 0835 Box Suture, Nylon 10-0 Suture Double-armed, Suture Length: 30cm, Needle Shape: Spatula, Needle Length: 5.5mm, Needle Curvature: 7/16” 158°, Needle Diameter: 0.14mm, Box Of 12 Sutures 10 15,000.00 150,000.00 309 0837 Box Suture, Polyglycolic Acid Absorbable 6-0 Suture, Suture Length: 30cm, Needle Shape: Spatula, Needle Length: 6.5mm, Needle Curvature: 3/8” 135°, Needle Diameter: 0.20mm 2 15,000.00 30,000.00 310 0838 Box Suture, Polyglycolic Acid Absorbable 7-0 Suture, Suture Length: 30cm, Needle Shape: Spatula, Needle Length: 6.5mm, Needle Curvature: 3/8” 135°, Needle Diameter: 0.20mm 10 15,000.00 150,000.00 311 0836 Box Suture, Polypropylene Monofilament 10-0 Suture Double-armed, Suture Length: 20cm, Needle Shape: Spatula, Needle Length: 16.0mm, Needle Curvature: Straight, Needle Diameter: 0.20mm 2 15,000.00 30,000.00 Sub-total 4,930,000.00 Various Medical Supplies 312 0480 Box Adhesive Bandage, 100's/box 90 100.00 9,000.00 313 0002 Bot Alcohol 70% Isoprophyl, 500ml 3,000 75.00 225,000.00 314 0003 Box Alcohol Prep Pad 70% Isoprophyl, 100's 3,000 75.00 225,000.00 315 0007 Pc Arm Sling, Adult 300 100.00 30,000.00 316 0008 Pc Arm Sling, Pedia 150 100.00 15,000.00 317 0509 Pc Bacterial Filter For Suction Machine Compatible With Medela 90 2,000.00 180,000.00 318 0513 Roll Bandage Roller 4inches X 5yards 30 50.00 1,500.00 319 0758 Set Bp Cuff Adult With Inflation Bag 250 300.00 75,000.00 320 0024 Set Bp Cuff Neonate With Inflation Bag 5 500.00 2,500.00 321 0025 Set Bp Cuff Pedia With Inflation Bag 38 400.00 15,000.00 322 0026 Set Bp Cuff Small Child With Inflation Bag 25 350.00 8,750.00 323 0031 Pc Bp Rubber Pump With Airflow Control 60 250.00 15,000.00 324 0032 Pc Cadaver Bag Adult 8 Feet 600 750.00 450,000.00 325 0032 Pc Cadaver Bag Pedia 3 Feet 50 500.00 25,000.00 326 0365 Pc Cannula For Oxygen Nasal Prong - Adult 4,500 50.00 225,000.00 327 0358 Pc Cannula For Oxygen Nasal Prong - Neonate 650 50.00 32,500.00 328 0366 Pc Cannula For Oxygen Nasal Prong - Pedia 750 50.00 37,500.00 329 0042 Pc Catheter Foley Bag 2way Fr. 08 With Needle-free Port 5 50.00 250.00 330 0043 Pc Catheter Foley Bag 2way Fr. 10 With Needle-free Port 100 50.00 5,000.00 331 0044 Pc Catheter Foley Bag 2way Fr. 12 With Needle-free Port 30 50.00 1,500.00 332 0045 Pc Catheter Foley Bag 2way Fr. 14 With Needle-free Port 150 50.00 7,500.00 333 0046 Pc Catheter Foley Bag 2way Fr. 16 With Needle-free Port 3,000 50.00 150,000.00 334 0526 Pc Catheter Foley Bag 2way Fr. 18 With Needle-free Port 30 50.00 1,500.00 335 0460 Pc Catheter Foley Bag 2way Fr. 20 With Needle-free Port 90 50.00 4,500.00 336 0461 Pc Catheter Foley Bag 2way Fr. 22 With Needle-free Port 60 100.00 6,000.00 337 0047 Pc Catheter Foley Bag 3way Fr. 18 With Needle-free Port 30 100.00 3,000.00 338 0048 Pc Catheter Foley Bag 3way Fr. 20 With Needle-free Port 30 100.00 3,000.00 339 0049 Pc Catheter Foley Bag 3way Fr. 22 With Needle-free Port 30 100.00 3,000.00 340 0050 Pc Catheter Foley Bag 3way Fr. 24 With Needle-free Port 30 100.00 3,000.00 341 0051 Pc Catheter Mushroom Fr. 28 15 300.00 4,500.00 342 0052 Pc Catheter Mushroom Fr. 32 15 300.00 4,500.00 343 0367 Pc Catheter Suction Fr. 05 1,500 15.00 22,500.00 344 0054 Pc Catheter Suction Fr. 08 3,000 15.00 45,000.00 345 0055 Pc Catheter Suction Fr. 10 3,000 15.00 45,000.00 346 0368 Pc Catheter Suction Fr. 12 3,000 15.00 45,000.00 347 0056 Pc Catheter Suction Fr. 14 10,500 10.00 105,000.00 348 0057 Pc Catheter Suction Fr. 16 10,500 10.00 105,000.00 349 0058 Pc Catheter Thoracic Fr. 24 15 350.00 5,250.00 350 0059 Pc Catheter Thoracic Fr. 28 15 350.00 5,250.00 351 0060 Pc Catheter Thoracic Fr. 32 30 350.00 10,500.00 352 0061 Pc Catheter Thoracic Fr. 36 30 350.00 10,500.00 353 1049 Pc Cervical Brush 30 20.00 600.00 354 0813 Box Skin Wipe With 2% Chlorhexidine In 70% Alcohol Individual Wrapped Wipe For Cleaning And Disinfection Of Skin 200pcs/box 150 900.00 135,000.00 355 0083 Pc Cohesive Conforming Bandage 04x4cm 150 150.00 22,500.00 356 0082 Pc Cohesive Conforming Bandage 06x4cm 300 175.00 52,500.00 357 0081 Pc Cohesive Conforming Bandage 08x4cm 300 200.00 60,000.00 358 0354 Pc Cohesive Conforming Bandage 10x4cm 150 250.00 37,500.00 359 0080 Pc Cohesive Conforming Bandage 12x4cm 150 275.00 41,250.00 360 0084 Pc Collecting Bottle For Sputum (clear) With Polyethylene Screw Cap With Label 3,600 10.00 36,000.00 361 0085 Pc Collecting Bottle For Urine/stool With Preferably Red Polyethylene Screw Cap With Label 15,000 10.00 150,000.00 362 0462 Pc Colostomy Drainable Pouch 38-45mm 15 100.00 1,500.00 363 0086 Pc Colostomy Drainable Pouch 50-57mm 15 100.00 1,500.00 364 0087 Pc Colostomy Drainable Pouch 70mm 15 100.00 1,500.00 365 0088 Pc Colostomy Starter Kit 40-45mm 225 450.00 101,250.00 366 0089 Pc Colostomy Starter Kit 50-57mm 400 450.00 180,000.00 367 0090 Pc Colostomy Starter Kit 70mm 250 450.00 112,500.00 368 0091 Pc Colostomy Stomahesive Wafer 40-45mm 15 250.00 3,750.00 369 0092 Pc Colostomy Stomahesive Wafer 50-57mm 152 250.00 37,875.00 370 0093 Pc Colostomy Stomahesive Wafer 70mm 2 250.00 375.00 371 0094 Pack Cord Clamp 100’s 30 300.00 9,000.00 372 0392 Pack Cotton Balls 300's 500 100.00 50,000.00 373 0542 Pack Cotton Balls, Sterile 3's 500 50.00 25,000.00 374 0095 Pack Cotton Tipped Applicator Individually Packed Sterile 100’s 300 100.00 30,000.00 375 0097 Pad Decontaminating Mat, 30sheets Per Pad 90 2,000.00 180,000.00 376 0770 Pc Dressing Film Dressing With Non-adherent Pad 10cmx12cm 150 100.00 15,000.00 377 0547 Pc Dressing Film Dressing With Non-adherent Pad 5cmx7cm 50 100.00 5,000.00 378 0393 Pc Dressing Film Dressing With Non-adherent Pad 6cmx10cm 50 100.00 5,000.00 379 0359 Pack Dressing Pack Contents: Sterile Gauze 4x4x8, 5's: 5 Packs Cotton Balls 3's:1 Pack Plaster Paper Tape 1"x10y: 1 Roll Povidone Iodine 15ml:1bot 2,500 350.00 875,000.00 380 Cotton Tipped Applicator Sterile:5 Pcs 381 0096 Kit Cesarean Section Kit- Cloth Bag With A Loop Handle That Contains The Gcgmmc Logo On The Front Side With The Mantra "so Gallares, So Kind" Labeled "cs Kit" On The Back Side. Contents Are Placed Inside The Bag With A Zipper Are The Following: -5 Packs-gauze Sterile 4x4x8ply,5's -6 Pairs Gloves Surgical Sterile Powder-free Latex-sensitive 6.5 -2 Pairs Glove Surgical Sterile Powder-free Latex Sensitive 7.0 -1 Pc Syringe 1ml Luer Lock/slip With Ultra-fine Needle G. 25 X 16mm, With Safety Mechanism Sterile Individually Packed Disposable -2 Pcs Syringe 3 Ml Luer Lock/slip With An Ultra-fine Needle With Safety Mechanism Sterile Individually Packed Disposable -2 Pcs Syringe 5 Ml Luer Lock/slip With An Ultra-fine Needle With Safety Mechanism Sterile Individually Packed Disposable -2 Pcs Syringe 10 Ml Luer Lock/slip With An Ultra-fine Needle With Safety Mechanism Sterile Individually Packed Disposable -1 Pc Foley Bag Catheter 2-way Fr. 16 With Needle-freeport -1 Urine Bag -1 Sterile Cord Clamp -1 Sachet Of Detergent Powder 75 Grams -1 Pc Underpad 800 1,500.00 1,200,000.00 382 0102 Pc Dressing Paraffin Gauze 10x10cm Sterile Individually Wrapped 1,000 75.00 75,000.00 383 0104 Pc Dressing Post-op 06.5x5cm 600 100.00 60,000.00 384 0105 Pc Dressing Post-op 09.5x8.5cm 600 200.00 120,000.00 385 0106 Pc Dressing Post-op 20x10cm 600 400.00 240,000.00 386 0107 Pc Dressing Post-op 25x10cm 600 450.00 270,000.00 387 0115 Pack Ecg Clip On Electrodes 4's 10 3,500.00 35,000.00 388 0472 Roll Ecg Recording Paper, 50 X 30mm. 60 50.00 3,000.00 389 0116 Roll Ecg Recording Paper, 63 X 30mm. 600 100.00 60,000.00 390 0473 Roll Ecg Recording Paper, 80 X 20-30mm 30 600.00 18,000.00 391 0117 Pack Ecg Rubber Chest Bulbs With Metal 6's 10 4,500.00 45,000.00 392 0119 Pack Electrodes, Radioluscent, 50's 1,000 10.00 10,000.00 393 0561 Roll Gauze Absorbent 36x100yd, X-ray Detectable 120 1,200.00 144,000.00 394 0562 Pack Gauze Absorbent, Non-sterile 2x2x12ply, 100’s 900 50.00 45,000.00 395 0121 Pack Gauze Absorbent, Non-sterile 4x4x12ply, 100’s 5,000 150.00 750,000.00 396 0563 Pack Gauze Absorbent, Sterile 2x2x8ply, 100's 12,000 5.00 60,000.00 397 0122 Pack Gauze Absrobent, Sterile 4x4x12ply, X-ray Detectable 5's 50,000 20.00 1,000,000.00 398 0465 Box Gloves Non-sterile, Latex, Large, 100's 6,000 200.00 1,200,000.00 399 0456 Box Gloves Non-sterile, Latex, Medium, 100's 9,000 200.00 1,800,000.00 400 0457 Box Gloves Non-sterile, Latex, Small, 100's 9,000 200.00 1,800,000.00 401 0360 Box Gloves Surgical Sterile Powder-free Hypoallergenic 6.0, 50's 360 1,900.00 684,000.00 402 0126 Box Gloves Surgical Sterile Powder-free Hypoallergenic 6.5, 50's 1,080 1,900.00 2,052,000.00 403 0127 Box Gloves Surgical Sterile Powder-free Hypoallergenic 7.0, 50's 720 1,900.00 1,368,000.00 404 0128 Box Gloves Surgical Sterile Powder-free Hypoallergenic 7.5, 50's 720 1,900.00 1,368,000.00 405 0129 Box Gloves Surgical Sterile Powder-free Latex-free Hypoallergenic 6.5, 50's 12 4,250.00 51,000.00 406 0130 Box Gloves Surgical Sterile Powder-free Latex-free Hypoallergenic 7.0, 50's 12 4,250.00 51,000.00 407 0137 Pc Guedal Airway 0 50 30.00 1,500.00 408 0138 Pc Guedal Airway 1 90 30.00 2,700.00 409 0139 Pc Guedal Airway 2 750 30.00 22,500.00 410 0140 Pc Guedal Airway 3 750 30.00 22,500.00 411 0141 Pc Guedal Airway 4 400 30.00 12,000.00 412 0142 Bot Hand Disinfectant, Propan-2-ol, Propan-1-ol Mecetronium Ethylsulfate, 1l 125 2,000.00 250,000.00 413 0572 Bot Hand Disinfectant, Ethanol And Propan-1-ol, 1l 500 1,200.00 600,000.00 414 0503 Pc Hot Water Bag, With Cloth Wrap 90 100.00 9,000.00 415 0146 Bot Humidifier Oxygen, Sterile Water, 340ml 3,000 175.00 525,000.00 416 0147 Bot Hydrogen Peroxide 3%, 120ml 450 200.00 90,000.00 417 0482 Pc Ice Bag, Adult 100 100.00 10,000.00 418 1080 Pc Ice Bag, Pedia 50 100.00 5,000.00 419 0785 Pc Infant Neonatal Phototherapy Eye Care Mask 30 200.00 6,000.00 420 0786 Pc Intubating Stylet, Fr. 06 50 50.00 2,500.00 421 0787 Pc Intubating Stylet, Fr. 10 50 50.00 2,500.00 422 0156 Pc Intubating Stylet, Fr. 14 125 50.00 6,250.00 423 0371 Sachet Lubricating Jelly, 0.5 Grams 18,000 5.00 90,000.00 424 0478 Pc Manual Vacuum Aspirator 6 1,500.00 9,000.00 425 0166 Pc Mask Face N95 Medium 3,000 150.00 450,000.00 426 0167 Pc Mask Face N95 Small 4,500 100.00 450,000.00 427 0171 Pc Mask Oxygen Non-rebreathing, Adult 2,500 50.00 125,000.00 428 0172 Pc Mask Oxygen Non-rebreathing, Pedia 900 50.00 45,000.00 429 0479 Pc Mask Oxygen With Rebreather, Adult 900 50.00 45,000.00 430 0174 Pc Medicine Cup With 30cc Calibration 9,000 50.00 450,000.00 431 0609 Pc Mucus Strap Extractor Fr. 05 50 100.00 5,000.00 432 0789 Pc Mucus Strap Extractor Fr. 08 50 100.00 5,000.00 433 0483 Pc Mucus Strap Extractor Fr. 12 150 120.00 18,000.00 434 0173 Kit Maternity Kit: Cloth Bag With A Loop Handle That Contains The Gcgmmc Logo Front Side With The Mantra "so Gallares, So Kind" Labeled "maternity Kit" On The Back Side Contents Placed Inside The Bag With Zipper 1 - Pair Of Gloves Powder-free Elbow-length 6.5 1 - Pair Of Gloves Powder-free Elbow-length 7.0 5 - Pair Of Gloves Powder-free 6.5 1 -pair Of Gloves Powder-free 7.0 2 - Safety Syringe, 3ml 1 - Safety Syringe, 10ml 5-gauze 4x4 Sterile 1- Cord Clamp Sterile 1- Cotton Ball 2-alcohol Swabs 1- Detergent Powder At Least 75grams 1-underpad 1,500 1,200.00 1,800,000.00 435 0183 Pc Mucus Strap Extractor Fr. 14 450 120.00 54,000.00 436 0184 Pc Nebulization Kit With Mask, Nozzle And Tubings, Adult 500 50.00 25,000.00 437 0611 Pc Nebulizer With Tubing (mask And Nozzle), Adult 1,050 50.00 52,500.00 438 0612 Pc Nebulizer With Tubing (mask And Nozzle), Pedia 1,050 50.00 52,500.00 439 0795 Box Needle Disposable Im G. 16 1" Preferably With Safety Features 100’s 5 150.00 750.00 440 0185 Box Needle Disposable Im G. 18 1½” Preferrably With Safety Features 100’s 600 150.00 90,000.00 441 0186 Box Needle Disposable Im G. 19 1½” Preferrably With Safety Features 100’s 600 150.00 90,000.00 442 0187 Box Needle Disposable Im G. 21 1” With Safety Features 100’s 600 250.00 150,000.00 443 0188 Box Needle Disposable Im G. 23 1” With Safety Features 100’s 600 250.00 150,000.00 444 0189 Box Needle Disposable Im G. 24 1” Preferrably With Safety Features 100’s 5 150.00 750.00 445 0796 Box Needle Disposable Im G. 25 1" Preferrably With Safety Features 100’s 5 150.00 750.00 446 0190 Box Needle Disposable Im G. 26 1” Preferrably With Safety Features 100’s 150 150.00 22,500.00 447 0614 Box Needle Microfine Pen G.23 X 4mm 15 1,500.00 22,500.00 448 0192 Kit Newborn Kit: 1 - Cloth Bag With Loop Handle That Contains The Gcgmmc Logo Front Side With Mantra "so Gallares, So Kind" Labeled "newborn Kit" On The Back Side Contents Placed Inside The Bag With Zipper 2 - Cotton Balls 1 - Pair Of Gloves Powder-free 6.5 1 - Syringe, 1ml - 1 - Syringe Insulin G.31, 6mm 1 - Infant Reusable Diaper 1 - Digital Thermometer With Calibration Certificate 1 - Baby Bonnet 3,000 700.00 2,100,000.00 449 0623 Pack Paper Towel At Least 175 Pulls 4,500 40.00 180,000.00 450 0194 Box Pediatric Urine Collector 100’s 15 350.00 5,250.00 451 0198 Pc Philadelphia Collar Large 30 1,500.00 45,000.00 452 0199 Pc Philadelphia Collar Medium 30 1,500.00 45,000.00 453 0200 Pc Philadelphia Collar Small 30 1,500.00 45,000.00 454 0201 Tube Plaster Adhesive 300 3,000.00 900,000.00 455 827401 Pc Permicath With Stylet And Splitting Needle Fr. 1 X 20cm 25 15,000.00 375,000.00 456 0626 Roll Plaster Adhesive Zinc Oxide 1.25cm X 5m 300 300.00 90,000.00 457 0627 Roll Plaster Adhesive Zinc Oxide 2.5cm X 5m 300 400.00 120,000.00 458 0193 Kit Patient's Kit Contents: 1 Cloth Bag With A Handle In Green With Printed Gcgmmc Logo With Mantra On The Front And Doh Programs At The Back 1-bath Soap, 25 Grams 1-tooth Brush With Hospital Logo 1-210cc Calibrated Drinking Glass With Hospital Logo 1-alcohol 70% Isopropyl 60ml 1-2ply Toilet Paper Roll 1-toothpaste Sachet, 10 Grams 1-digital Thermometer With Plastic Case (to Include Calibrated Certificate Of Thermometer) 1-rubber Slipper Size 8 6,000 500.00 3,000,000.00 459 0628 Roll Plaster Adhesive Zinc Oxide 5cm X 5m 900 600.00 540,000.00 460 0629 Roll Plaster Adhesive Zinc Oxide 7.5cm X 5m 1,000 900.00 900,000.00 461 1082 Roll Plaster Paper Tape, 1.25cm X 9.1m 300 100.00 30,000.00 462 0202 Roll Plaster Paper Tape, 2.5cm X 9.1m 100 150.00 15,000.00 463 0203 Roll Plaster Plastic Tape, 2.5cm X 9.1m 1,000 150.00 150,000.00 464 0204 Roll Plaster Plastic Tape, 5cm X 9.1m 600 175.00 105,000.00 465 0205 Roll Plaster Plastic Tape, 7.6cm X 9.1m 1,000 250.00 250,000.00 466 0206 Roll Plaster Silk Tape, 2.5cm X 9.1m 100 200.00 20,000.00 467 0207 Bot Polyhexanide Wound Irrigating Solution, 350ml 600 900.00 540,000.00 468 0213 Pack Povidone Swab Sticks, 3’s 1,800 100.00 180,000.00 469 0214 Pc Probe Disposable Adult Compatible With Existing Pulse Oximeter 250 500.00 125,000.00 470 0484 Pc Probe Disposable Pedia Compatible With Existing Pulse Oximeter 250 500.00 125,000.00 471 0215 Pc Probe Disposable Neonate Compatible With Existing Pulse Oximeter 180 500.00 90,000.00 472 0216 Pc Resuscitator Bag Disposable, Silicone With Container, Adult 600 1,100.00 660,000.00 473 0217 Pc Resuscitator Bag Disposable, Silicone With Container, Neonate 150 1,100.00 165,000.00 474 0218 Pc Resuscitator Bag Disposable, Silicone With Container, Pedia 180 1,100.00 198,000.00 475 0349 Pc Shoe Cover, Ankle Length, Disposable 700 250.00 175,000.00 476 0455 Pc Spirometer 300 250.00 75,000.00 477 0251 Pc Stopcock 3-way Disposable With Extension Tubing 7,800 50.00 390,000.00 478 0252 Pc Suction Connecting Tube 8,500 75.00 637,500.00 479 0389 Bot Surface Disinfectant Spray 300 800.00 240,000.00 480 0660 Pack Surface Disinfectant Wipes, At Least 100 Pulls 1,000 1,200.00 1,200,000.00 481 0255 Pc Surgical Clipper Blade 1,500 400.00 600,000.00 482 1081 Box Syringe 1ml No Needle, Sterile, Individually Packed Disposable, 100's 600 800.00 480,000.00 483 1006 Box Syringe 3ml No Needle, Sterile, Individually Packed Disposable, 100's 2,500 700.00 1,750,000.00 484 1009 Box Syringe 5ml No Needle, Sterile, Individually Packed Disposable, 100's 2,500 900.00 2,250,000.00 485 1014 Box Syringe 10ml No Needle, Sterile, Individually Packed Disposable, 100's 2,000 1,050.00 2,100,000.00 486 0295 Box Syringe 20ml No Needle, Sterile, Individually Packed Disposable, 50's 1,200 500.00 600,000.00 487 0296 Box Syringe 50-60ml No Needle, Sterile, Individually Packed Disposable, 25's 1,200 500.00 600,000.00 488 0293 Pc Syringe Asepto With Bulb 5,500 30.00 165,000.00 489 0665 Box Syringe Disposable Insulin G. 31, 6mm, 100’s 600 900.00 540,000.00 490 0823 Pc Tape Measure 100 10.00 1,000.00 491 0241 Pc Thermometer Digital With Calibration Certificate 1,000 200.00 200,000.00 492 0458 Pc Tourniquet Rubber Latex 600 10.00 6,000.00 493 0299 Kit Tracheostomy Care Kit: 1pc- Moisture-proof Drape 1pair- Vinyl Gloves 4pc- 4" X 4" And 4-ply Premium Gauze Sponges 1pc- Bristle Brush 1pc- Disposable Forcep 1pc- Premium Tracheostomy Dressing 250 350.00 87,500.00 494 0394 Pc Tracheostomy Dressing 360 100.00 36,000.00 495 0305 Pc Tube Duodenal Silicone Fr. 10 300 300.00 90,000.00 496 0399 Pc Tube Duodenal Silicone Fr. 12 300 300.00 90,000.00 497 0306 Pc Tube Duodenal Silicone Fr. 14 600 300.00 180,000.00 498 0307 Pc Tube Duodenal Silicone Fr. 16 3,000 300.00 900,000.00 499 0372 Pc Tube Endotracheal Size 2.5, Uncufed 100 40.00 4,000.00 500 0373 Pc Tube Endotracheal Size 3.0, Uncuffed 600 40.00 24,000.00 501 0374 Pc Tube Endotracheal Size 3.5, Uncuffed 600 40.00 24,000.00 502 0375 Pc Tube Endotracheal Size 4.0, Uncuffed 300 40.00 12,000.00 503 0376 Pc Tube Endotracheal Size 4.5, Uncuffed 100 40.00 4,000.00 504 0377 Pc Tube Endotracheal Size 5.0, Cuffed 300 40.00 12,000.00 505 0378 Pc Tube Endotracheal Size 5.5, Cuffed 300 40.00 12,000.00 506 0379 Pc Tube Endotracheal Size 6.0, Cuffed 300 40.00 12,000.00 507 0380 Pc Tube Endotracheal Size 6.5, Cuffed 300 40.00 12,000.00 508 0381 Pc Tube Endotracheal Size 7.0, Cuffed 1,200 40.00 48,000.00 509 0382 Pc Tube Endotracheal Size 7.5, Cuffed 1,800 40.00 72,000.00 510 0641 Pc Tube Endotracheal Size 8.0, Cuffed 10 40.00 400.00 511 0303 Pc Tube Feeding Fr. 5 100-120cm 1,200 50.00 60,000.00 512 0304 Pc Tube Feeding Fr. 8 100-120cm 1,500 50.00 75,000.00 513 951466 Pc Umbilical Vein Catheter Fr. 4.0 X 37cm 150 600.00 90,000.00 514 517115 Pc Umbilical Vein Catheter Fr. 6.0 X 37cm 150 600.00 90,000.00 515 0363 Pc Underpad 3,000 20.00 60,000.00 516 0383 Pc Urine Bag, 2000ml Reservoir 2,100 50.00 105,000.00 517 0320 Pc Urine Meter With Needle Free Sample Port 240 1,000.00 240,000.00 518 0444 Pc Vacuum Delivery System With Palm Pump 60 5,000.00 300,000.00 519 0321 Box Wooden Stick Applicator 1000’s 300 250.00 75,000.00 520 0322 Box Wooden Tongue Depressor Sterile, 100's 120 100.00 12,000.00 521 0323 Box Wristlet, Adult (white), 100’s 60 350.00 21,000.00 522 0324 Box Wristlet, Pedia (blue), 100’s 60 350.00 21,000.00 523 0325 Box Wristlet, Pedia (pink), 100’s 60 350.00 21,000.00 Sub-total 50,414,950.00 Total Batch 1 157,645,850.00 Batch 2 S/n Unit Item Qty Unit Cost Total Cost 1 Pc Polysulfone Low Flux Dialyzer 1,000 916.50 916,500.00 2 Pc Polysulfone High Flux Dialyzer 1,000 933.40 933,400.00 3 Pc Av Fistula Needle (arterial) 10,000 22.75 227,500.00 4 Pc Av Fistula Needle (venous) 10,307 22.78 234,794.00 5 Pc Hemobloodlines 10,390 182.00 1,890,980.00 6 Cann Premix Solution (bicarbonate Concentrate): 5 Liters In Cannisters 15,000 253.50 3,802,500.00 7 Cann Premix Solution (acid Concentrate): 5 Liters In Cannisters 15,000 253.50 3,802,500.00 8 Gal Disinfectant For The Machine (inside) 200 4000.00 800,000.00 9 Gal Disinfectant For The Dialyzer 200 4547.40 909,480.00 10 Sack Industrial Salt 100 455.00 45,500.00 11 Tube Residual Test Strip 100/tube 40 1154.40 46,176.00 12 Tube Potency Test Strip 100/tube 40 2598.70 103,948.00 13 Pc Ultrapure Dialysate Filter 120 9097.40 1,091,688.00 14 Pc Df Filter 30 9097.40 272,922.00 15 Kit Fistula Kit: 1pc Syringe Disposable 20cc, 1 Pc Needle G 23 With Safety Feature, 1 Pair Gloves Surgical Sterile Powder-free Hypoallergenic S 7.0, 1pc Dental Bib, 2pcs. Cherry Balls, 1 Pack Gauze Absorbent, Sterile 4x4x8ply, 5', 3pcs. Chlorhexidine Prep Pad 6,000 550.00 3,300,000.00 16 Pack Subclavian Catheter On Pack: 1 Pair Nitrile Gloves Medium, 1 Pc Syringe Disposable Without Needle, 1 Pair Gloves Sterile Powder-free Hypoallergenic S7.0, 1 Pc Underpad, 2 Pcs 10cc Syringe Without Needle, 2 Pcs 3cc Syringe Without Needle, 1 Pack Gauze Absorbent, Sterile 4x4x8 Ply 5’, 1 Pack Povidone Swab Stick Of 3 2,500 550.00 1,375,000.00 17 Pack Subclavian Catheter Off Pack: 1 Pair Nitrile Gloves Medium, 1 Pair Gloves Surgical Sterile Powder-free Hypoallergenic 7.0, 1 Pc 10cc Syringe, 1 Pc 3cc Syringe, 1 Pack Gauze Absorbent, Sterile 4x4x8ply 5’, 2 Pcs Heplock, 1 Set Transparent Film Dress 10cm X 12 Cm 2,500 550.00 1,375,000.00 Notes: End-user Requirements: 1. Items Shall Be Delivered Within 10 Days. 2. Reported Defective Items Shall Be Replaced By The Supplier For Safety And Quality Assurance. 3.the Institution Must Be Allowed To Exchanged Products That Are About To Expire Up To At Least 3 Months Before Expiration Date. 4.guarantee Letter That Supports End-user Requirements No.2 & 3 Upon Delivery. 5.certificate Product Registration / Coe / Certificate Of Renewal/cmdn. Sub-total 21,049,614.00 18 Bag Capd/dpca 2 Stay Safe Link Peritoneal Dialysis Solution 2.3% 2l 180 300.00 54,000.00 19 Bag Capd/dpca 2 Stay Safe Link Peritoneal Dialysis Solution 1.5% 2l 720 300.00 216,000.00 20 Pc Peritoneal Dialysis Extension Catheter (40cm) 12 1840.00 22,080.00 21 Pc Catheter Adaptor Luer-lock With Closure Cap 4 480.00 1,920.00 22 Pc Peritoneal Dialysis Organizer 2 1400.00 2,800.00 23 Pc Disinfection Cap 900 26.00 23,400.00 Notes: End-user Requirements: 1. Item Shall Be Delivered Within 10 Days. 2. Reported Defective Items Shall Be Replaced By The Supplier For Safety And Quality Assurance. 3. The Institution Must Be Allowed To Exchange Products That Are About To Expire Up To At Least 3 Months Before Expiration Date. 4. Guarantee Letter That Supports End-user Requirements No.2 & 3 Upon Delivery. 5. Certificate Product Registration/coe/certificate Of Renewal/cmdn Sub-total 320,200.00 Total Batch 2 21,448,088.00 Grand Total Batch 1 & 2 179,015,664.00

Details: Description Invitation To Bid For Early Procurement Activity (cy 2025) For The Supply And Delivery Of Various Medical / Surgical Supplies Through Framework Agreement 1. The Gov. Celestino Gallares Memorial Medical Center, Using A Single-year For A Duration Of One (1) Year Framework Agreement, Through The Nep 2025 And Hospital Income Intends To Apply The Sum Of One Hundred Seventy Nine Million Ninety Three Thousand Nine Hundred Thirty Eight Pesos (php179,093,938.00) Being The Abc To Payments Under The Contract For Ib No. 2024-11-042. Bids Received In Excess Of The Total Cost Per Line Items Shall Be Automatically Rejected. 2. The Gov. Celestino Gallares Memorial Medical Center Now Invites Bids For Above Procurement Project. Delivery Of The Goods Is Required Within Ten (10) Calendar Days After Issuance Of A Call-off Or Any Date As Determined By The Pe. Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Gcgmmc Bids And Awards Committee (bac) Office Through Electronic Mail Via Gcgmmc.bacmedsurglabsupplies@gmail.com Or Telephone Call At (038) 411-4868 To 69 Local 286 And Inspect The Bidding Documents At The Address Given Below During Office Hours. 5. A Complete Set Of Bidding Documents May Be Acquired And Downloaded By Interested Bidders On November 18, 2024-december 10, 2024 From Gcgmmc Google Drive (gcgmmc.bacmedsurglabsupplies@gmail.com) And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb In The Amount Of Fifty Thousand Pesos Only (php 50,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Through Cash At The Gcgmmc Cashier Section Or Bank Deposit With The Following Bank Details: Bank Name: Development Bank Of The Philippines Account Name: Gcgmmc General Fund Account Number: General Fund Account No. 00-0-00001-780-3 For Bidders Paying Thru Online Transfer Or Bank Deposits, A Successful Transaction/payment Must Be Sent To The Bac’s Official Email Address. Acknowledgement Receipt Will Be Issued In Lieu Of The Official Receipt (coa Circular No. 2021-014 Clause 5.2) As Proof That Payment Is Verified, Confirmed And Received By Gcgmmc. Only Upon The Issuance Of The Acknowledgement Receipt Shall The Bidder Be Granted Access To The Bac Google Drive. 6. The Gov. Celestino Gallares Memorial Medical Center Will Hold A Pre-bid Conference On November 26, 2024 @ 1:00 Pm At Cloud Lounge, 5/f, 555 Building, 0053 Miguel Parras St., Poblacion Ii, Tagbilaran City, 6300 Bohol Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below, On Or Before December 10, 2024 @ 8:59am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On December 10, 2024 @ 9:00am At The Gcgmmc Hospital Library And Training Hall, 5/f 555 Building, 0053 Miguel Parras St., Poblacion Ii, Tagbilaran City, 6300 Bohol. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. No Further Instructions. 11. The Gov. Celestino Gallares Memorial Medical Center Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Magnolia Marie B. Tiempo Bac Secretariat Bids And Awards Committee (bac) Office Gov. Celestino Gallares Memorial Medical Center 0053, M. Parras St., Poblacion Ii, Tagbilaran City, 6300 Bohol Email: Gcgmmc.bacmedsurglabsupplies@gmail.com Tel. No.: (038) 411-4868 To 69 Local 286 Cel. No.: +63 9171469712 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: Philgeps Website Http://www.philgeps.gov.ph Gcgmmc Website Https://www.gcgmh.gov.ph Approved: Flor Annabelle B. Cesar, Rn, Man (sgd) Bac Chairperson (medical/surgical/laboratory Supplies) Noted: Miguelito S. Jayoma, Md, Fpcs, Fpsgs, Mhm (sgd) Medical Center Chief Ii Head Of Procuring Entity (hope) *_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_ S/n Stock / Property No. Unit Item Qty Unit Cost Total Cost Anesthesia Supplies 1 0004 Pc Anesthesia Breathing Circuit, Adult 450 1,000.00 450,000.00 2 0006 Pc Anesthesia Breathing Circuit, Pedia 5 1,000.00 5,000.00 3 0005 Pc Anesthesia Breathing Circuit, Neonate 5 1,000.00 5,000.00 4 0693 Pc Anesthesia Vent Mask Adult Large Size 5 5 500.00 2,500.00 5 0694 Pc Anesthesia Vent Mask Adult Medium Size 5 5 500.00 2,500.00 6 0695 Pc Anesthesia Vent Mask Adult Small 5 500.00 2,500.00 7 0696 Pc Anesthesia Vent Mask Child Size 4 5 500.00 2,500.00 8 0697 Pc Anesthesia Vent Mask Infant Size 3 5 500.00 2,500.00 9 0698 Pc Anesthesia Vent Mask Neonate Size 2 5 500.00 2,500.00 10 0699 Pc Anesthesia Vent Mask Toddler Size 1 5 650.00 3,250.00 11 1223 Pc Arterial Line Transducer Compatible With Ge Cardiac Monitor 5 2,000.00 10,000.00 12 1220 Pc Bp Cuff Adult With Inflation Bag Compatible For Ge Cardiac Monitor 2 1,000.00 2,000.00 13 1221 Pc Bp Cuff Pedia With Inflation Bag Compatible For Ge Cardiac Monitor 2 1,000.00 2,000.00 14 0040 Pc Carbon Dioxide Absorber 6 10,000.00 60,000.00 15 Pc Spinal Needle G. 25 3,500 200.00 700,000.00 16 0035 Pc Disposable Anesthesia Gas Sampling Line, Male/male Luer 3m/10ft, Material Pvc/peid 1.2, 10’s 1 10,000.00 5,000.00 17 1211 Pc Disposable Pulse Oximeter Probe Adult Compatible With Ge Cardiac Monitor 2 1,000.00 2,000.00 18 1222 Donut Pillow For Head Stabilization 2 1,000.00 2,000.00 19 0775 Pc End-tidal Co2 Nasal Cannula Sampling Line Compatible With Ge Machine 2 3,500.00 7,000.00 20 0333 Pc Epidural Set 300 1,500.00 450,000.00 21 1209 Pc Jackson Rees Circuit 0.5l With Apl Valve 5 3,000.00 15,000.00 22 0790 Pc Nasal Airway Size 6 2 500.00 1,000.00 23 0791 Pc Nasal Airway Size 7 2 500.00 1,000.00 24 1210 Pc Nebulization Kit Compatible With Breathing Circuit For Anesthesia Machine 5 500.00 2,500.00 25 0632 Pc Pressure Infuser Inflatable With Bulb And Regulator 5 2,000.00 10,000.00 26 1212 Pc Supraglottic Airway Supreme With Gastric Port Size 1 2 5,000.00 10,000.00 27 1213 Pc Supraglottic Airway Supreme With Gastric Port Size 1.5 2 5,000.00 10,000.00 28 1214 Pc Supraglottic Airway Supreme With Gastric Port Size 2 2 5,000.00 10,000.00 29 1215 Pc Supraglottic Airway Supreme With Gastric Port Size 2.5 2 5,000.00 10,000.00 30 0657 Pc Supraglottic Airway Supreme With Gastric Port Size 3 2 5,000.00 10,000.00 31 0658 Pc Supraglottic Airway Supreme With Gastric Port Size 4 2 5,000.00 10,000.00 32 0659 Pc Supraglottic Airway Supreme With Gastric Port Size 5 2 5,000.00 10,000.00 33 1216 Tube Endotracheal Double Lumen Size 35 Left 5 7,000.00 35,000.00 34 0827 Pc Tube Endotracheal Double Lumen Size 37 Left 5 7,000.00 35,000.00 35 0300 Pc Tube Endotracheal Introducer Atraumatic Round Tipped With Markings Fr. 14-15 5 400.00 2,000.00 36 1218 Pc Tube Endotracheal Introducer Bougie Curved Fr. 10 5 1,500.00 7,500.00 37 1219 Pc Tube Endotracheal Introducer Bougie Curved Fr. 14 5 1,500.00 7,500.00 38 1196 Pc Tube Endotracheal Reinforced/armored Size 3.0 5 1,200.00 6,000.00 39 1197 Pc Tube Endotracheal Reinforced/armored Size 3.5 5 1,200.00 6,000.00 40 1198 Pc Tube Endotracheal Reinforced/armored Size 4.0 5 1,200.00 6,000.00 41 1199 Pc Tube Endotracheal Reinforced/armored Size 4.5 5 1,200.00 6,000.00 42 1200 Pc Tube Endotracheal Reinforced/armored Size 5.0 5 1,200.00 6,000.00 43 1201 Pc Tube Endotracheal Reinforced/armored Size 5.5 5 1,200.00 6,000.00 44 1202 Pc Tube Endotracheal Preformed South Size 3.0 5 400.00 2,000.00 45 1203 Pc Tube Endotracheal Preformed South Size 3.5 5 400.00 2,000.00 46 1204 Pc Tube Endotracheal Preformed South Size 4.0 5 400.00 2,000.00 47 1205 Pc Tube Endotracheal Preformed South Size 4.5 5 400.00 2,000.00 48 1206 Pc Tube Endotracheal Preformed North Size 6.5 5 400.00 2,000.00 49 1207 Pc Tube Endotracheal Preformed North Size 7.0 5 400.00 2,000.00 50 1208 Pc Tube Endotracheal Preformed North Size 7.5 5 400.00 2,000.00 51 0452 Pc Ug Peripheral Nerve Block 5 6,000.00 30,000.00 52 1195 Pc Ultrasound Probe Sterile Condom Cover 5 50.00 250.00 Sub-total 1,985,000.00 Geriatric 53 1117 Box Adhesive Silicone Hydrofiber Foam Dressing With Ionic Silver Size 12.5x12.5cm, 10's 10 9,500.00 95,000.00 54 1106 Box Dressing Adhesive Hydrofiber Foam 12.5 X 12.5cm, 10's 10 5,000.00 50,000.00 55 0520 Box Dressing Hydrocolloid Controlled Gel Formula 10x10cm, 10's 100 1,500.00 150,000.00 56 0098 Box Dressing Hydrocolloid Extra Thin 10x10cm, 10's 250 1,600.00 400,000.00 57 1105 Box Dressing Non-adhesive Hydrofiber Foam 10cm X 10cm, 10's 10 3,500.00 35,000.00 58 1107 Box Dressing Non-adhesive Hydrofiber Foam Dressing Size 8"x8"(20cmx20cm), 5's 20 6,000.00 120,000.00 59 1108 Box Dressing Adhesive Hydrofiber Foam 21x21cm, 5's 20 7,000.00 140,000.00 60 1115 Box Enhanced Hydrofiber Dressing With Ionic Silver And Strengthening Fibre With Antibiofilm Size 2x45cm Rope, 5's 20 9,500.00 190,000.00 61 1116 Box Enhanced Hydrofiber Dressing With Ionic Silver And Strengthening Fibre With Antibiofilm Size 2x45 Cm Rope, 5's 20 4,500.00 90,000.00 62 1109 Box Latex Safe Tubular Bandage For Fingers, Toes (approximate Circumference 3"-8"), 10yds 10 900.00 9,000.00 63 1110 Box Latex Safe Tubular Bandage For Fingers, Wrist Small Hand (approximate Circumference 8-11"), 10yds 9m 10 1,000.00 10,000.00 64 1111 Box Latex Safe Tubular Bandage For Hand,elbow, Foot (approximate Circumference 11-16"), 10yds 9m 10 1,100.00 11,000.00 65 1112 Box Latex Safe Tubular Bandage For Hand,elbow, Foot & Knee (approximate Circumference 11-16"), 10yds 9m 10 1,100.00 11,000.00 66 1113 Box Latex Safe Tubular Bandage For Small Chest And Axilla (approximate Circumference 26-25"), 10yds 9m 10 1,600.00 16,000.00 67 1114 Box Latex Safe Tubular Bandage For Chest, Axilla & Abdomen (approxiamate Circumference 52-58"), 10yds 9m 10 3,300.00 33,000.00 Sub-total 1,360,000.00 Intravenous Supplies 68 0204 Pc 0.9% Sodium Chloride In 10ml Syringe, Sterile 4,500 60.00 270,000.00 69 0202 Pc 0.9% Sodium Chloride In 03ml Syringe, Sterile 9,000 60.00 540,000.00 70 0203 Pc 0.9% Sodium Chloride In 05ml Syringe, Sterile 4,500 60.00 270,000.00 71 0320 Pc Blood Transfusion Set 210u Filter, Double Chamber, Airvent Slip Type Gravity 3,000 100.00 300,000.00 72 0314 Pc Intravenous Catheter G. 18 With Integrated Hard Plastic Safety Clip With Snap Fit Cap Port And Perforated Wing 9,500 80.00 760,000.00 73 0315 Pc Intravenous Catheter G. 20 With Integrated Hard Plastic Safety Clip With Snap Fit Cap Port And Perforated Wing 9,000 80.00 720,000.00 74 0316 Pc Intravenous Catheter G. 22 With Integrated Hard Plastic Safety Clip With Snap Fit Cap Port And Perforated Wing 9,500 80.00 760,000.00 75 0417 Pc Intravenous Catheter G. 24 With Integrated Hard Plastic Safety Clip With Snap Fit Cap Port And Perforated Wing 6,000 80.00 480,000.00 76 0317 Pc Intravenous Catheter G. 26 With Integrated Hard Plastic Safety Clip With Snap Fit Cap Port And Perforated Wing 6,000 80.00 480,000.00 77 0152 Pc Iv Splint Neonate 300 70.00 21,000.00 78 0153 Pc Iv Starter Kit: 1-pc 70% Isopropyl Alcohol Swab 1-pc Latex-free, Polyisoprene Synthetic Blue Rubber Tourniquet 1-pc Sterile Transparent Dressing 1-pc Intravenous Site Label 1-roll Easy-to-tear Hypoallergenic Plaster 2-pcs 2x2 Inches Sterile Gauze 1-pc Film Dressing Note: Sterility And Product Expiry Should Be Clearly Stated On The Label 15,000 160.00 2,400,000.00 79 0730 Pc Iv Wrist Support Adult Large 3,000 70.00 210,000.00 80 0154 Pc Iv Wrist Support, Adult-medium 900 70.00 63,000.00 81 0346 Pc Iv Wrist Support, Adult-small 900 70.00 63,000.00 82 0155 Pc Iv Wrist Support, Pedia-meduim 900 70.00 63,000.00 83 0319 Pc Microset 4,000 150.00 600,000.00 84 1065 Pc Platelet Set 500 100.00 50,000.00 85 0185 Pc Needle-free Port Adaptor Straight Fluid 10,500 60.00 630,000.00 86 0243 Pc Stopcock 3-way Disposable With Extension Tubing 4,000 150.00 600,000.00 87 0426 Pc Tube Extension Octopus Triple Lumen, At Least 10cm Length With Needle-free Connector 1,500 500.00 750,000.00 88 0341 Pc Tube Extension Set Double Lumen (2-way), 15cm Macrob Ore With Luer Lock Needle-free Split Septum Adapter With Sliding Clamp Latex-free 1,500 300.00 450,000.00 89 0290 Pc Tube Extension For Syringe Pump 105cm 2,000 250.00 500,000.00 90 0286 Pc Tube Extension For Syringe Pump 75cm 500 250.00 125,000.00 91 0318 Pc Vented Macro Gravity Administration Set With Anti-run Dry And Auto Prime Mechanism With Needle Free Access Y-site Port With Pinch Clamp 10,500 200.00 2,100,000.00 92 0420 Pc Volumetric Set 60 Drip/ml Burette Volume 100-120ml Gravity Type With Air Vent Needle 240cm Length Dehp Free Tubing Material Luer Lock 11,000 200.00 2,200,000.00 Sub-total 15,405,000.00 Neurosurgery Supplies 93 0471 Pc Bipolar Forceps, Adjustable Dissecting Force, Non-stick Bayonet 19cm With Solid Silver Tip 0.7mm, Disposable 5 75,000.00 375,000.00 94 0472 Pc Bipolar Forceps, Adjustable Dissecting Force, Non-stick Bayonet 19cm With Solid Silver Tip 1.0mm, Disposable 5 75,000.00 375,000.00 95 0473 Pc Bipolar Forceps, Irrigation Bayonet 22cm With Solid Silver Tip 0.7mm, Disposable 2 75,000.00 150,000.00 96 0474 Pc Bipolar Forceps, Irrigation Bayonet 22cm With Solid Silver Tip 1.0mm, Disposable 2 75,000.00 150,000.00 End-users Agreement 1. Delivery Timeframe: Items Must Be Delivered Within 10 Days Of The Order Placement To Ensure Timely Receipt By The End-user. 2. Defective Item Replacement: In The Event Of Reported Defective Items, The Supplier Is Responsible For Promptly Replacing Them To Ensure Safety And Quality. 3. Product Expiration Exchange: The Institution Must Be Permitted To Exchange Products Approaching Expiration, Up To A Minimum Of 3 Months Before The Expiry Date, To Maintain Product Quality And Effectiveness With No Validity Period, Allowing The Institution To Maintain Optimal Inventory Quality. 4. Guarantee Letter: A Guarantee Letter Supporting The End-user Requirements Specified In Points 2 And 3 Must Be Provided, Ensuring Accountability And Assurance From The Supplier. 5. Certificate Of Compliance: A Certificate Of Product Registration (cpr)/certificate Of Renewal/certificate Of Medical Device Notification (cmdn) Must Be Included, Validating The Product's Compliance With Regulatory Standards. 6. Product Evaluation Period: The Supplied Item Shall Undergo Thorough Assessment And Verification Through Product Evaluation In The Institution Over A Six-month Validity Period To Ensure Sustained Quality Assurance And Effectiveness For The End-user. 6. Product Evaluation Period: The Supplied Item Shall Undergo Thorough Assessment And Verification Through Product Evaluation In The Institution Over A Six-month Validity Period To Ensure Sustained Quality Assurance And Effectiveness For The End-user. 7. Supplier Evaluation Requirement: The Supplier Must Have Achieved A Minimum Csr Supplier Evaluation Score Of 4 (very Satisfactory) Or Higher For The Period Of January To June 2024 To Be Considered For Contract Award. 8. New Items Requirement: All Delivered Items Must Be Brand New And Not Reprocessed. Sub-total 1,050,000.00 Respiratory Therapy Unit 97 Pc Air Filter Compatible With Fisher & Paykel Airvo Model 30 3,500.00 105,000.00 98 0009 Pc Bacterial/viral Filter Compatible With Mechanical Ventilator 900 250.00 225,000.00 99 Pc Full Face Mask For Bpap, Vented, Large 10 8,000.00 80,000.00 100 Pc Full Face Mask For Bpap, Vented, Medium 10 8,000.00 80,000.00 101 Pc Full Face Mask For Bpap, Vented, Small 10 8,000.00 80,000.00 102 1169 Pc Full-face Mask With Nasogastric Tube Sealing For Non-invasive Ventilation Size Xs 15 7,000.00 105,000.00 103 1168 Pc Full-face Mask With Nasogastric Tube Sealing For Non-invasive Ventilation Size Small 30 7,000.00 210,000.00 104 1167 Pc Full-face Mask With Nasogastric Tube Sealing For Non-invasive Ventilation Size Medium 60 7,000.00 420,000.00 105 1166 Pc Full-face Mask With Nasogastric Tube Sealing For Non-invasive Ventilation Size Large 15 7,000.00 105,000.00 106 0441 Pc Heated Moisture Exchange Filter With Luer Lock Port And Super Catheter Mount And Elbow 300 300.00 90,000.00 107 0036 Kit High Flow Nasal Cannula Adult-large Tube And Chamber Kit Compatible With Fisher & Paykel Airvo Model (contents: Single Heated Circuit, Elbow, Chamber, Nasal Cannula) 30 9,000.00 270,000.00 108 0037 Kit High Flow Nasal Cannula Adult-medium Tube And Chamber Kit Compatible With Fisher & Paykel Airvo Model (contents: Single Heated Circuit, Elbow, Chamber, Nasal Cannula) 30 9,000.00 270,000.00 109 0476 Kit High Flow Nasal Cannula Adult-small Tube And Chamber Kit Compatible With Fisher & Paykel Airvo Model (contents: Single Heated Circuit, Elbow, Chamber, Nasal Cannula) 30 9,000.00 270,000.00 110 Pc High Flow Nasal Cannula For Neonate, Nippv, Xxs 50 500.00 25,000.00 111 Pc High Flow Nasal Cannula For Neonate, Nippv, Xs 50 500.00 25,000.00 112 Pc High Flow Nasal Cannula For Neonate, Nippv, Small 50 500.00 25,000.00 113 Pc High Flow Nasal Cannula For Neonate, Nippv, Medium 50 500.00 25,000.00 114 Pc High Flow Nasal Cannula For Neonate, Nippv, Larg 50 500.00 25,000.00 115 Pc Heated Tube And Humidification Chamber For High Flow Machine Adult-large Compatible With Comed 50 7,000.00 350,000.00 116 Pc Heated Tube And Humidification Chamber For High Flow Machine Adult-medium Compatible With Comed 50 7,000.00 350,000.00 117 Pc Heated Tube And Humidification Chamber For High Flow Machine Adult-small Compatible With Comed 50 7,000.00 350,000.00 118 Pc Niv Face Mask Non-vented, Large 50 5,000.00 250,000.00 119 Pc Niv Face Mask Non-vented, Medium 50 5,000.00 250,000.00 120 Pc Niv Face Mask Non-vented, Small 50 5,000.00 250,000.00 121 Pc Tracheal Mask 150 150.00 22,500.00 122 0311 Set Tubing Ventilator Complete Set, Adult Contents: Adult Breathing Circuit With 2 Water Traps, 2 Bacterial Filters, 1hmef, 1 Disposable Catheter Mount, 1 Auto-fill Chamber 750 2,000.00 1,500,000.00 123 0312 Set Tubing Ventilator Complete Set, Neonate Contents: Neonate Breathing Circuit With 2 Water Traps, 2 Bacterial Filters, 1hmef, 1 Disposable Catheter Mount, 1 Auto-fill Chamber 150 2,000.00 300,000.00 124 0313 Set Tubing Ventilator Complete Set, Pedia Contents: Pedia Breathing Circuit With 2 Water Traps, 2 Bacterial Filters, 1hmef, 1 Disposable Catheter Mount, 1 Auto-fill Chamber 300 2,000.00 600,000.00 125 0713 Set Weaning Set For Ventilator Machine 60 1,000.00 60,000.00 Sub-total 6,717,500.00 Medical Gases 126 0170 Cyl Medical Grade Carbon Dioxide 6 7,000.00 42,000.00 127 0171 Cyl Medical Grade Compressed Air 60 700.00 42,000.00 128 0172 Cyl Medical Grade Oxygen Refill 31,200 700.00 21,840,000.00 129 0173 Cyl Medical Grade Oxygen Refill For Portable 3,000 700.00 2,100,000.00 End-users Agreement: 1. Delivery Timeframe: Items Must Be Delivered Within 10 Days Of The Order Placement To Ensure Timely Receipt By The End-user. 2. Defective Item Replacement: In The Event Of Reported Defective Items, The Supplier Is Responsible For Promptly Replacing Them To Ensure Safety And Quality. 3. Product Expiration Exchange: The Institution Must Be Permitted To Exchange Products Approaching Expiration, Up To A Minimum Of 3 Months Before The Expiry Date, To Maintain Product Quality And Effectiveness With No Validity Period, Allowing The Institution To Maintain Optimal Inventory Quality. 4. Guarantee Letter: A Guarantee Letter Supporting The End-user Requirements Specified In Points 2 And 3 Must Be Provided, Ensuring Accountability And Assurance From The Supplier. 5. Certificate Of Compliance: A Certificate Of Product Registration (cpr)/certificate Of Renewal/certificate Of Medical Device Notification (cmdn) Must Be Included, Validating The Product's Compliance With Regulatory Standards. 6. Product Evaluation Period: The Supplied Item Shall Undergo Thorough Assessment And Verification Through Product Evaluation In The Institution Over A Six-month Validity Period To Ensure Sustained Quality Assurance And Effectiveness For The End-user. 7. Supplier Evaluation Requirement: The Supplier Must Have Achieved A Minimum Csr Supplier Evaluation Score Of 4 (very Satisfactory) Or Higher For The Period Of January To June 2024 To Be Considered For Contract Award. 8. New Items Requirement: All Delivered Items Must Be Brand New And Not Reprocessed. Sub-total 24,024,000.00 Reprocessing Unit For Medical Devices 130 0014 Amp Biological Indicator Compatible With Matachana High Temperature Machine 1,200 500.00 600,000.00 131 0013 Amp Biological Indicator Compatible With Ethylene Oxide (c2h4o) Machine 60 500.00 30,000.00 132 0015 Amp Biological Indicator Compatible With Matachana Plasma (h202) Machine 600 1,000.00 600,000.00 133 0022 Box Bowie And Dick Type Test Pack, 134 Degrees Celsius 3.5minutes, 20's 10 12,000.00 120,000.00 134 0477 Pack External Indicator Label Compatible With Aesculap Rigid Container 1000's/pack 6 20,000.00 120,000.00 135 0339 Box External Indicator Tape Compatible With Matachana Plasma (h202), 25cmx25m, 20 Rolls/box 6 34,000.00 204,000.00 136 0370 Roll External Indicator Tape For High Temperature Sterilizer 1 Inch 360 300.00 108,000.00 137 0420 Sack Industrial Salt 60 500.00 30,000.00 138 0151 Gal Instrument Detergent Enzymatic 5l 12 3,500.00 42,000.00 139 0153 Gal Instrument Disinfectant 0.55%-0.60% Orthophthaldehyde, 5l 12 2,000.00 24,000.00 140 0396 Bot Instrument Lubricant, Paraffin Liquid Of Pharmaceutical Grade, Non-ionic Surfactants 6 1,600.00 9,600.00 141 0155 Pack Internal Chemical Indicator Strip Class 5 For High Temperature Sterilization 50's 600 1,200.00 720,000.00 142 0589 Pack Internal Chemical Indicator Strip For Eo (c2h4o), 50's 6 500.00 3,000.00 143 0337 Pack Internal Chemical Indicator Strip For For Plasma (h202), 250's 3 30,000.00 90,000.00 144 0384 Roll Paper-plastic Peel Pouch 03” Flat 200m/roll 6 1,000.00 6,000.00 145 0385 Roll Paper-plastic Peel Pouch 04'' Flat, 200m/roll 6 1,000.00 6,000.00 146 0802 Roll Paper-plastic Peel Pouch 06'' Flat, 200m/roll 6 3,500.00 21,000.00 147 0386 Roll Paper-plastic Peel Pouch 08” Flat, 200meter/roll 6 3,500.00 21,000.00 148 0387 Roll Paper-plastic Peel Pouch 10” Flat, 200m/roll 6 4,000.00 24,000.00 149 0388 Roll Paper-plastic Peel Pouch 12” Flat, 200m/roll 6 4,000.00 24,000.00 150 0338 Box Pcd -helix + Chemical Strips For H2o2, 250 Units Per Box 2 75,000.00 150,000.00 151 0449 Gal Reagent Compatible With Matachana Washer Disinfector, Enzymatic Detergent 6 5,000.00 30,000.00 152 0447 Gal Reagent Compatible With Matachana Washer Disinfector, Maximum Ph Alkaline 6 5,000.00 30,000.00 153 0448 Gal Reagent Compatible With Matachana Washer Disinfector, Sequel Rinse Aid, Acid-free 6 5,000.00 30,000.00 154 0505 Pack Reusable Filter Compatible With Aesculap Rigid Container, 10's/pack 10 20,000.00 200,000.00 155 1084 Roll Reusable Filter Compatible With Aygon Rigid Container, 10's/pack 1 20,000.00 20,000.00 156 0369 Pc Sterilant Compatible With Ethylene Oxide (c2h4o) Machine 100 4,000.00 400,000.00 157 0336 Pc Sterilant Reagent Compatible With Matachana Plasma (h202) In Hdpe Container 100 30,000.00 3,000,000.00 158 0719 Pc Sterilization Wrap (spunbond Meltdown Spunbond), 120x120cm 6,000 50.00 300,000.00 159 0244 Pc Sterilization Wrap (spunbond Meltdown Spunbond), 45x45cm 6,000 30.00 180,000.00 160 0245 Pc Sterilization Wrap (spunbond Meltdown Spunbond), 50x50cm 6,000 35.00 210,000.00 161 0246 Pc Sterilization Wrap (spunbond Meltdown Spunbond), 60x60cm 6,000 40.00 240,000.00 162 0247 Pc Sterilization Wrap (spunbond Meltdown Spunbond), 75x75cm 6,000 45.00 270,000.00 163 0684 Bx Tamper Proof Lock With Process Indicator For Steam Sterilization Compatible With Aesculap Rigid Containers, 1000’s 6 50,000.00 300,000.00 164 0723 Roll Thermal Paper For Compatible With Matachana Machine 60 X57.5 M 300 1,000.00 300,000.00 165 0340 Roll Tyvek Rolls 03", For Sterilization Process By Hydrogen Peroxide With External Process Indicator For H2o2, With Color Change 6 3,000.00 18,000.00 166 0342 Roll Tyvek Rolls 06", For Sterilization Process By Hydrogen Peroxide With External Process Indicator For H2o2, With Color Change 6 6,000.00 36,000.00 167 0343 Roll Tyvek Rolls 08", For Sterilization Process By Hydrogen Peroxide With External Process Indicator For H2o2, With Color Change, 200mmx70m 6 10,000.00 60,000.00 168 0344 Roll Tyvek Rolls 10", For Sterilization Process By Hydrogen Peroxide With External Process Indicator For H2o2, With Color Change, 200mmx70m 6 12,000.00 72,000.00 169 0345 Roll Tyvek Rolls 12", For Sterilization Process By Hydrogen Peroxide With External Process Indicator For H2o2, With Color Change, 300mmx70m 6 17,000.00 102,000.00 170 0749 Roll Tyvek Rolls 16", For Sterilization Process By Hydrogen Peroxide With External Process Indicator For H2o2, With Color Change, 500mmx70m 6 35,000.00 210,000.00 Sub-total 8,960,600.00 Orthopedic Surgery 171 0510 Roll Bandage Elastic 2inches X 5yards 900 50.00 45,000.00 172 0010 Roll Bandage Elastic 4inches X 5yards 3,000 50.00 150,000.00 173 0011 Roll Bandage Elastic 6inches X 5yards 3,000 50.00 150,000.00 174 1074 Roll Bandage Esmarch 4 Inches X 2.5meters 10 1,000.00 10,000.00 175 1075 Roll Bandage Esmarch 6 Inches X 2.5meters 10 1,000.00 10,000.00 176 1178 Roll Fibercast 4 Inches 100 500.00 50,000.00 177 1179 Roll Fibercast 6 Inches 100 500.00 50,000.00 178 0511 Roll Plaster Of Paris 4 X 5yd 900 50.00 45,000.00 179 0512 Roll Plaster Of Paris 6 X 5yd 900 50.00 45,000.00 180 1175 Pc Suture Anchors 2.9mm 20 2,500.00 50,000.00 181 1176 Pc Suture Anchors 5.0mm 20 2,500.00 50,000.00 182 1076 Pc Suture, Monofilament Polypropylene, 0, 40mm-mayo 2 Needle, 100cm 180 1,000.00 180,000.00 183 1077 Pc Suture, Monofilament Polypropylene, 4, 40mm-mayo 2 Needle, 100cm 180 1,000.00 180,000.00 184 1182 Pc Suture Wire Polyblend Braided With Needle 90 2,000.00 180,000.00 185 0012 Roll Wadding Sheet 4inches X 5yards 1,200 30.00 36,000.00 186 0451 Roll Wadding Sheet 6inches X 5yards 4,000 30.00 120,000.00 Sub-total 1,351,000.00 Operating Room 187 0001 Pc Abdominal Lap Sponge 12x12 With Loop, Sterile, Individually Packed 1,500 100.00 150,000.00 188 0016 Box Blade Surgical No. 10, 100's 50 100.00 5,000.00 189 0017 Box Blade Surgical No. 11, 100's 50 100.00 5,000.00 190 0514 Box Blade Surgical No. 12, 100's 1 100.00 100.00 191 0018 Box Blade Surgical No. 15, 100's 50 100.00 5,000.00 192 0019 Box Blade Surgical No. 20, 100's 50 100.00 5,000.00 193 0020 Box Blade Surgical No. 22, 100's 50 100.00 5,000.00 194 0021 Pc Bone Wax 300 300.00 90,000.00 195 0501 Pc Cadexomer Iodine 100% Containing 0.9% Iodine, 3grams 300 700.00 210,000.00 196 0033 Box Camera Cover, Plastic Sterile, 50's 1 35,000.00 35,000.00 197 0442 Pc Catheter Locking Solution 30% Pre-filled, 5ml 1,000 500.00 500,000.00 198 0068 Pc Catheter Vascular 12f X 20-26cm, Curved Duo Split Triple Lumen 500 3,500.00 1,750,000.00 199 0913 Pc Catheter Vascular 12f X 15-16cm, Curved Duo Split Triple Lumen 700 3,500.00 2,450,000.00 200 0078 Pc Cautery Electrosurgical Pencil Standard 70mm Blade, Button Switch 3,600 500.00 1,800,000.00 201 0076 Pc Cautery Pad With Solid Gel, Foam Support With At Least 300cm Non Detachable Cable Connector Compatible With Covidien Machine, Adult 3,000 500.00 1,500,000.00 202 0077 Pc Cautery Pad With Solid Gel, Foam Support With At Least 300cm Non Detachable Cable Connector Compatible With Covidien Machine, Neonate 10 600.00 6,000.00 203 0075 Pc Cautery Pads With Solid Gel, Foam Support, At Least 202x101mm With 300cm Non-detachable Cable Connector, Pedia 10 600.00 6,000.00 204 0144 Pc Hemostatic Gelatine Sponge 300 500.00 150,000.00 205 0145 Pc Hemostatic Oxidized Regenerated Cellulose 3 X 4” 300 2,500.00 750,000.00 206 0161 Pack Laparotomy Pack: (5) Surgical Gown Medium-large Size, (1) Mayo Stand Cover At Least 60x140cm, (1) Square Of Drape With Adhesive At Least 75x90cm, (1) Laparotomy Drape At Least 270x320x330cm, (1) Back Table Cover At Least 150x200cm, (5) Hand Towel At Least 40x40cm, Sterile 1,800 2,000.00 3,600,000.00 207 Pack Lithotomy Pack: (4) Surgical Gown Medium-large Size, (1) Mayo Stand Cover At Least 60x140cm, (2) Legging Peridrape (1) Baby Wrap Drape At Least 90x90cm, (1) Ob Drape Collection Pouch At Least 110x120cm, (1) Back Table Cover At Least 150x200cm, (5) Towel At Least At Least 40x40cm, Sterile 1,000 2,500.00 2,500,000.00 208 0162 Pc Ligating Clip Cartridge Medium-large 6 Clips In1 Cartridge With Applier 180 2,100.00 378,000.00 209 Pc Marker Dual Tip Ink Permanent Skin Marker 60 500.00 30,000.00 210 0164 Box Mask Face 3-ply Disposable Tie-on, 50's 900 500.00 450,000.00 211 0180 Pc Mesh Polypropylene 15cm X 15cm 60 2,500.00 150,000.00 212 0179 Pc Mesh Polypropylene 30-35cm X 30-35cm 6 3,000.00 18,000.00 213 0181 Pc Mesh Polypropylene 7.5cm X 15cm 60 2,500.00 150,000.00 214 0195 Pc Penrose Drain 1/2 X 18 50 300.00 15,000.00 215 0625 Pc Penrose Drain 1/4’ X 18 50 300.00 15,000.00 216 0196 Pc Penrose Drain 1” X 18 50 300.00 15,000.00 217 0211 Gal Povidone Antiseptic 10% 60 2,000.00 120,000.00 218 0212 Gal Povidone Cleanser 7.5% 60 2,000.00 120,000.00 219 0219 Pc Saw Gigli 15 1,500.00 22,500.00 220 0397 Pc Silicone Flat Drain System 150cc-200cc Reservoir 360 1,200.00 432,000.00 221 0228 Bot Skin Disinfectant: Propan-2-ol Benzalkonium Chloride, 1 Liter 600 2,000.00 1,200,000.00 222 0229 Bot Skin Disinfectant: Propan-2-ol Benzalkonium Chloride, 250ml 150 1,500.00 225,000.00 223 0231 Pc Skin Stapler, With Stapler Remover Every 50 Pcs 500 700.00 350,000.00 224 0234 Pc Stapler 3d Linear Cutter 75mm Reload 75 3,000.00 225,000.00 225 0235 Unit Stapler 3d Linear Cutter (55mm) 10 15,000.00 150,000.00 226 0236 Pc Stapler 3d Linear Cutter 55mm Reload 75 3,000.00 225,000.00 227 0254 Pc Suction Set Poole Drain With Yankeur Tip Suction Handle, With Thumb Control Vent 2,000 300.00 600,000.00 228 0282 Pc Suture, Chromic, 0 37mm 1/2c. Atraumatic 36 250.00 9,000.00 229 0839 Pc Suture, Chromic, 1-0 40mm 1/2c. Atraumatic 36 250.00 9,000.00 230 0283 Pc Suture, Chromic, 2-0 26mm 1/2c. Atraumatic 36 250.00 9,000.00 231 0284 Pc Suture, Chromic, 3-0 26mm 1/2c. Atraumatic 36 250.00 9,000.00 232 0819 Pc Suture, Chromic, 4-0 17mm 1/2c. Atraumatic 36 250.00 9,000.00 233 0286 Pc Suture, Chromic, 5-0 17mm 1/2c. Atraumatic 36 250.00 9,000.00 234 0846 Pc Suture, Endoscopic Loop Ligature, Polyglactin 0, 3.5m, 18" 45cm 36 500.00 18,000.00 235 0258 Pc Suture, Glyconate/polyglycaprone 25 Absorbable, Monofilament, 4-0, 19mm 3/8c. Atraumatic Size 72 600.00 43,200.00 236 0257 Pc Suture, Glyconate/polyglycaprone 25 Absorbable, Monofilament, 4-0, 19mm 3/8c. Cutting Size 36 600.00 21,600.00 237 0260 Pc Suture, Glyconate/polyglycaprone 25 Absorbable, Monofilament, 5-0, 13mm 3/8c. Atraumatic Size 72 600.00 43,200.00 238 0259 Pc Suture, Glyconate/polyglycaprone 25 Absorbable, Monofilament, 5-0, 13mm 3/8c. Cutting Size 36 600.00 21,600.00 239 0264 Pc Suture, Monofilament Absorbable Poly-4-hydroxybutrate, C.1/2, 37mm, 90cm Size 0 72 1,000.00 72,000.00 240 0265 Pc Suture, Monofilament Polyamide, 3-0, 19-24mm 3/8c., Cutting 648 300.00 194,400.00 241 0266 Pc Suture, Monofilament Polyamide, 4-0, 19-24mm 3/8c., Cutting 1,260 300.00 378,000.00 242 0267 Pc Suture, Monofilament Polyamide, 5-0, 11-13mm 3/8c., Reverse Cutting 1,044 300.00 313,200.00 243 0268 Pc Suture, Monofilament Polyamide, 6-0, 11-13mm 3/8c., Reverse Cutting 36 400.00 14,400.00 244 0946 Pc Suture, Polydiaxanone Monofilament Absorbable 0, 90cm With 36mm 720 600.00 432,000.00 245 0946 Pc Suture, Polydiaxanone Monofilament Absorbable 1, 90cm With 36mm 720 600.00 432,000.00 246 0948 Pc Suture, Monofilament Polyamide 6, Non-absorbable 4-0, 45cm, With Plastic Surgery Prime Needle 36 600.00 21,600.00 247 0949 Pc Suture, Monofilament Polyamide 6, Non-absorbable 6-0, 45cm, With 16mm Precision Cosmetic Needle 36 600.00 21,600.00 248 0950 Pc Suture, Monofilament Polyamide 6, Non-absorbable 5-0, 45cm, With 16mm Precision Cosmetic Needle 36 600.00 21,600.00 249 0951 Pc Suture, Monofilament Polyamide 6, Non-absorbable 4-0, 45cm, With 19mm For Skin 2 Needle 36 600.00 21,600.00 250 Suture, Monofilament Polyamide, Non-absorbable 9-0, 5.1mm, 3/8c., Atraumatic 36 700.00 25,200.00 251 0269 Pc Suture, Monofilament Polypropylene, 0, 40mm 1/2c., Atraumatic 360 600.00 216,000.00 252 0407 Pc Suture, Monofilament Polypropylene, 1, 40mm 1/2c., Atraumatic 36 600.00 21,600.00 253 0270 Pc Suture, Monofilament Polypropylene, 2-0, 31mm 1/2c., Atraumatic 1,080 600.00 648,000.00 254 0271 Pc Suture, Monofilament Polypropylene, 3-0, 17mm 1/2c., Atraumatic 1,332 600.00 799,200.00 255 0272 Pc Suture, Monofilament Polypropylene, 4-0, 17mm 1/2c., Atraumatic 720 600.00 432,000.00 256 0273 Pc Suture, Monofilament Polypropylene, 5-0, 13mm 1/2c., Atraumatic 36 1,000.00 36,000.00 257 0274 Pc Suture, Monofilament Polypropylene, 6-0, 9mm 1/2c., Atraumatic 144 1,000.00 144,000.00 258 0275 Pc Suture, Monofilament Polypropylene, 7-0, 9-10mm 3/8c., Atraumatic Double Arm 36 1,500.00 54,000.00 259 0820 Pc Suture, Parynchyma Set (poly-glycolic Acid Tape) 36 1,000.00 36,000.00 260 0276 Pc Suture, Silk 0 Strand 972 200.00 194,400.00 261 0277 Pc Suture, Silk 2-0 Strand 1,368 200.00 273,600.00 262 0278 Pc Suture, Silk 3-0 Strand 1,368 200.00 273,600.00 263 0662 Pc Suture, Silk, 0, 40mm 1/2c., Atraumatic 360 200.00 72,000.00 264 0279 Pc Suture, Silk, 3-0, 22-26mm 1/2c., Atraumatic 1,800 200.00 360,000.00 265 0488 Pc Suture, Silk, 3-0, 22-26mm 1/2c., Cutting 612 300.00 183,600.00 266 0280 Pc Suture, Silk, 4-0, 22-26mm 1/2c., Atraumatic 360 400.00 144,000.00 267 0821 Pc Suture, Silk, 4-0, 22-26mm 1/2c., Cutting 36 400.00 14,400.00 268 0281 Pc Suture, Silk, 5-0, 17-22mm 3/8c., Atraumatic 36 500.00 18,000.00 269 0287 Pc Suture, Synthetic Absorbable Polyglycolic/polyglactin, 0, 36mm 1/2c. Atraumatic 7,200 400.00 2,880,000.00 270 0400 Pc Suture, Synthetic Absorbable Polyglycolic/polyglactin, 1, 40mm 1/2c. Atraumatic 7,200 400.00 2,880,000.00 271 0288 Pc Suture, Synthetic Absorbable Polyglycolic/polyglactin, 2-0, 37mm 1/2c. Atraumatic 6,012 400.00 2,404,800.00 272 0822 Pc Suture, Synthetic Absorbable Polyglycolic/polyglactin, 3-0, 26mm 1/2c., Atraumatic 3,600 500.00 1,800,000.00 273 0289 Pc Suture, Synthetic Absorbable Polyglycolic/polyglactin, 3-0, 26mm 1/2c., Cutting 1,800 500.00 900,000.00 274 0290 Pc Suture, Synthetic Absorbable Polyglycolic/polyglactin, 4-0, 22mm 1/2c., Atraumatic 1,296 600.00 777,600.00 275 0291 Pc Suture, Synthetic Absorbable Polyglycolic/polyglactin, 5-0, 17mm 3/8c., Atraumatic 180 600.00 108,000.00 276 0944 Pc Suture, Synthetic Absorbable Polyglycolic/polyglactin, 4-0, 75cm With 17mm Renal Bypass 1 Plus Needle 36 700.00 25,200.00 277 0945 Pc Suture, Synthetic Absorbable Polyglycolic/polyglactin, 3-0, 70cm With 17mm Renal Bypass 36 700.00 25,200.00 278 0952 Pc Suture, Synthetic Absorbable Polyglactin, Braided 5-0, 75cm With 17mm Renal Bypass 1 Plus Needle 36 700.00 25,200.00 279 0954 Pc Suture, Synthetic Absorbable Polyglactin Braided With Triclosan 4-0, 70 Cm With 13mm Renal Bypass-2 Needle 36 700.00 25,200.00 280 0955 Pc Suture, Synthetic Monofilament Absorbable, Polyglecaprone 25, 4-0, 70cm With 19mm Plastic Surgery-2 Needle 36 700.00 25,200.00 281 0956 Pc Suture, Synthetic Monofilament Absorbable, Polyglecaprone 25, 5-0, 45cm With 13mm Plastic Surgery-3 Needle 36 700.00 25,200.00 282 0256 Pc Topical Skin Adhesive 360 800.00 288,000.00 283 0406 Pc Trocar Bladeless With Fixation Cannula 10-11mm 150 5,000.00 750,000.00 284 0405 Pc Trocar Bladeless With Fixation Cannula 5mm 60 5,000.00 300,000.00 285 0825 Pc T-tube Sterile Fr. 16 5 1,500.00 7,500.00 286 0826 Pc T-tube Sterile Fr. 18 5 1,500.00 7,500.00 287 0836 Pc Tube Nephrostomy Set Fr. 12 5 3,000.00 15,000.00 288 0837 Pc Tube Nephrostomy Set Fr. 14 5 3,000.00 15,000.00 289 0308 Pc Tube Tracheostomy With Inner Cannula No. 4.0, Fenestrated 2 6,000.00 12,000.00 290 0832 Pc Tube Tracheostomy With Inner Cannula No. 5.0, Fenestrated 2 6,000.00 12,000.00 291 0309 Pc Tube Tracheostomy With Inner Cannula No. 6.0, Fenestrated 5 6,000.00 30,000.00 292 0833 Pc Tube Tracheostomy With Inner Cannula No. 7.0, Fenestrated 25 6,000.00 150,000.00 293 0310 Pc Tube Tracheostomy With Inner Cannula No. 8.0, Fenestrated 50 6,000.00 300,000.00 294 0687 Pc Ultrasonic Shear 17cm Length 1 50,000.00 50,000.00 295 0688 Pc Ultrasonic Shear 9cm Length 1 50,000.00 50,000.00 296 1127 Pc Ultrasonic Laparoscopic Shears With Adaptive Tissue Technology And Advance Hemostasis Mode Curved Tip 36cm 6 52,000.00 312,000.00 297 0364 Pack Uterine Pack, X-ray Detectable, 12-16ply, 10’s 1,500 500.00 750,000.00 298 0838 Pc Ureteral Stent, Standard Double J, Fr.5- 6 24cm 3 5,000.00 15,000.00 Sub-total 41,447,800.00 Ophthalmology Supplies Pc Foldable Intra-ocular Aspheric Lens 150 1,600.00 240,000.00 300 1087 Pc Ophthalmic Viscosurgical Device Sodium Hyaluronate 1.8% 1.5ml 200 1,100.00 220,000.00 301 1088 Pc Ophthalmic Viscosurgical Device Hydroxypropylmethylcellulose 2.0%, 2.0ml 200 1,500.00 300,000.00 302 0839 Pc 15 Degree Ophthalmic Stab Knife 200 4,000.00 800,000.00 303 1086 Pc 2.2mm Slit Angled Ophthalmic Knife 200 5,000.00 1,000,000.00 304 0841 Pc 2.3mm Crescent Ophthalmic Knife Bevel Up 100 5,000.00 500,000.00 305 0840 Pc 2.75mm Slit Angled Ophthalmic Knife 200 5,000.00 1,000,000.00 306 0842 Pc 23g Mvr Lance Ophthalmic Knife 100 5,000.00 500,000.00 307 0849 Box Needle Disposable Im G. 30 1/2” Preferrably With Safety Features 100’s 10 1,000.00 10,000.00 308 0835 Box Suture, Nylon 10-0 Suture Double-armed, Suture Length: 30cm, Needle Shape: Spatula, Needle Length: 5.5mm, Needle Curvature: 7/16” 158°, Needle Diameter: 0.14mm, Box Of 12 Sutures 10 15,000.00 150,000.00 309 0837 Box Suture, Polyglycolic Acid Absorbable 6-0 Suture, Suture Length: 30cm, Needle Shape: Spatula, Needle Length: 6.5mm, Needle Curvature: 3/8” 135°, Needle Diameter: 0.20mm 2 15,000.00 30,000.00 310 0838 Box Suture, Polyglycolic Acid Absorbable 7-0 Suture, Suture Length: 30cm, Needle Shape: Spatula, Needle Length: 6.5mm, Needle Curvature: 3/8” 135°, Needle Diameter: 0.20mm 10 15,000.00 150,000.00 311 0836 Box Suture, Polypropylene Monofilament 10-0 Suture Double-armed, Suture Length: 20cm, Needle Shape: Spatula, Needle Length: 16.0mm, Needle Curvature: Straight, Needle Diameter: 0.20mm 2 15,000.00 30,000.00 Sub-total 4,930,000.00 Various Medical Supplies 312 0480 Box Adhesive Bandage, 100's/box 90 100.00 9,000.00 313 0002 Bot Alcohol 70% Isoprophyl, 500ml 3,000 75.00 225,000.00 314 0003 Box Alcohol Prep Pad 70% Isoprophyl, 100's 3,000 75.00 225,000.00 315 0007 Pc Arm Sling, Adult 300 100.00 30,000.00 316 0008 Pc Arm Sling, Pedia 150 100.00 15,000.00 317 0509 Pc Bacterial Filter For Suction Machine Compatible With Medela 90 2,000.00 180,000.00 318 0513 Roll Bandage Roller 4inches X 5yards 30 50.00 1,500.00 319 0758 Set Bp Cuff Adult With Inflation Bag 250 300.00 75,000.00 320 0024 Set Bp Cuff Neonate With Inflation Bag 5 500.00 2,500.00 321 0025 Set Bp Cuff Pedia With Inflation Bag 38 400.00 15,000.00 322 0026 Set Bp Cuff Small Child With Inflation Bag 25 350.00 8,750.00 323 0031 Pc Bp Rubber Pump With Airflow Control 60 250.00 15,000.00 324 0032 Pc Cadaver Bag Adult 8 Feet 600 750.00 450,000.00 325 0032 Pc Cadaver Bag Pedia 3 Feet 50 500.00 25,000.00 326 0365 Pc Cannula For Oxygen Nasal Prong - Adult 4,500 50.00 225,000.00 327 0358 Pc Cannula For Oxygen Nasal Prong - Neonate 650 50.00 32,500.00 328 0366 Pc Cannula For Oxygen Nasal Prong - Pedia 750 50.00 37,500.00 329 0042 Pc Catheter Foley Bag 2way Fr. 08 With Needle-free Port 5 50.00 250.00 330 0043 Pc Catheter Foley Bag 2way Fr. 10 With Needle-free Port 100 50.00 5,000.00 331 0044 Pc Catheter Foley Bag 2way Fr. 12 With Needle-free Port 30 50.00 1,500.00 332 0045 Pc Catheter Foley Bag 2way Fr. 14 With Needle-free Port 150 50.00 7,500.00 333 0046 Pc Catheter Foley Bag 2way Fr. 16 With Needle-free Port 3,000 50.00 150,000.00 334 0526 Pc Catheter Foley Bag 2way Fr. 18 With Needle-free Port 30 50.00 1,500.00 335 0460 Pc Catheter Foley Bag 2way Fr. 20 With Needle-free Port 90 50.00 4,500.00 336 0461 Pc Catheter Foley Bag 2way Fr. 22 With Needle-free Port 60 100.00 6,000.00 337 0047 Pc Catheter Foley Bag 3way Fr. 18 With Needle-free Port 30 100.00 3,000.00 338 0048 Pc Catheter Foley Bag 3way Fr. 20 With Needle-free Port 30 100.00 3,000.00 339 0049 Pc Catheter Foley Bag 3way Fr. 22 With Needle-free Port 30 100.00 3,000.00 340 0050 Pc Catheter Foley Bag 3way Fr. 24 With Needle-free Port 30 100.00 3,000.00 341 0051 Pc Catheter Mushroom Fr. 28 15 300.00 4,500.00 342 0052 Pc Catheter Mushroom Fr. 32 15 300.00 4,500.00 343 0367 Pc Catheter Suction Fr. 05 1,500 15.00 22,500.00 344 0054 Pc Catheter Suction Fr. 08 3,000 15.00 45,000.00 345 0055 Pc Catheter Suction Fr. 10 3,000 15.00 45,000.00 346 0368 Pc Catheter Suction Fr. 12 3,000 15.00 45,000.00 347 0056 Pc Catheter Suction Fr. 14 10,500 10.00 105,000.00 348 0057 Pc Catheter Suction Fr. 16 10,500 10.00 105,000.00 349 0058 Pc Catheter Thoracic Fr. 24 15 350.00 5,250.00 350 0059 Pc Catheter Thoracic Fr. 28 15 350.00 5,250.00 351 0060 Pc Catheter Thoracic Fr. 32 30 350.00 10,500.00 352 0061 Pc Catheter Thoracic Fr. 36 30 350.00 10,500.00 353 1049 Pc Cervical Brush 30 20.00 600.00 354 0813 Box Skin Wipe With 2% Chlorhexidine In 70% Alcohol Individual Wrapped Wipe For Cleaning And Disinfection Of Skin 200pcs/box 150 900.00 135,000.00 355 0083 Pc Cohesive Conforming Bandage 04x4cm 150 150.00 22,500.00 356 0082 Pc Cohesive Conforming Bandage 06x4cm 300 175.00 52,500.00 357 0081 Pc Cohesive Conforming Bandage 08x4cm 300 200.00 60,000.00 358 0354 Pc Cohesive Conforming Bandage 10x4cm 150 250.00 37,500.00 359 0080 Pc Cohesive Conforming Bandage 12x4cm 150 275.00 41,250.00 360 0084 Pc Collecting Bottle For Sputum (clear) With Polyethylene Screw Cap With Label 3,600 10.00 36,000.00 361 0085 Pc Collecting Bottle For Urine/stool With Preferably Red Polyethylene Screw Cap With Label 15,000 10.00 150,000.00 362 0462 Pc Colostomy Drainable Pouch 38-45mm 15 100.00 1,500.00 363 0086 Pc Colostomy Drainable Pouch 50-57mm 15 100.00 1,500.00 364 0087 Pc Colostomy Drainable Pouch 70mm 15 100.00 1,500.00 365 0088 Pc Colostomy Starter Kit 40-45mm 225 450.00 101,250.00 366 0089 Pc Colostomy Starter Kit 50-57mm 400 450.00 180,000.00 367 0090 Pc Colostomy Starter Kit 70mm 250 450.00 112,500.00 368 0091 Pc Colostomy Stomahesive Wafer 40-45mm 15 250.00 3,750.00 369 0092 Pc Colostomy Stomahesive Wafer 50-57mm 152 250.00 37,875.00 370 0093 Pc Colostomy Stomahesive Wafer 70mm 2 250.00 375.00 371 0094 Pack Cord Clamp 100’s 30 300.00 9,000.00 372 0392 Pack Cotton Balls 300's 500 100.00 50,000.00 373 0542 Pack Cotton Balls, Sterile 3's 500 50.00 25,000.00 374 0095 Pack Cotton Tipped Applicator Individually Packed Sterile 100’s 300 100.00 30,000.00 375 0097 Pad Decontaminating Mat, 30sheets Per Pad 90 2,000.00 180,000.00 376 0770 Pc Dressing Film Dressing With Non-adherent Pad 10cmx12cm 150 100.00 15,000.00 377 0547 Pc Dressing Film Dressing With Non-adherent Pad 5cmx7cm 50 100.00 5,000.00 378 0393 Pc Dressing Film Dressing With Non-adherent Pad 6cmx10cm 50 100.00 5,000.00 379 0359 Pack Dressing Pack Contents: Sterile Gauze 4x4x8, 5's: 5 Packs Cotton Balls 3's:1 Pack Plaster Paper Tape 1"x10y: 1 Roll Povidone Iodine 15ml:1bot 2,500 350.00 875,000.00 380 Cotton Tipped Applicator Sterile:5 Pcs 381 0096 Kit Cesarean Section Kit- Cloth Bag With A Loop Handle That Contains The Gcgmmc Logo On The Front Side With The Mantra "so Gallares, So Kind" Labeled "cs Kit" On The Back Side. Contents Are Placed Inside The Bag With A Zipper Are The Following: -5 Packs-gauze Sterile 4x4x8ply,5's -6 Pairs Gloves Surgical Sterile Powder-free Latex-sensitive 6.5 -2 Pairs Glove Surgical Sterile Powder-free Latex Sensitive 7.0 -1 Pc Syringe 1ml Luer Lock/slip With Ultra-fine Needle G. 25 X 16mm, With Safety Mechanism Sterile Individually Packed Disposable -2 Pcs Syringe 3 Ml Luer Lock/slip With An Ultra-fine Needle With Safety Mechanism Sterile Individually Packed Disposable -2 Pcs Syringe 5 Ml Luer Lock/slip With An Ultra-fine Needle With Safety Mechanism Sterile Individually Packed Disposable -2 Pcs Syringe 10 Ml Luer Lock/slip With An Ultra-fine Needle With Safety Mechanism Sterile Individually Packed Disposable -1 Pc Foley Bag Catheter 2-way Fr. 16 With Needle-freeport -1 Urine Bag -1 Sterile Cord Clamp -1 Sachet Of Detergent Powder 75 Grams -1 Pc Underpad 800 1,500.00 1,200,000.00 382 0102 Pc Dressing Paraffin Gauze 10x10cm Sterile Individually Wrapped 1,000 75.00 75,000.00 383 0104 Pc Dressing Post-op 06.5x5cm 600 100.00 60,000.00 384 0105 Pc Dressing Post-op 09.5x8.5cm 600 200.00 120,000.00 385 0106 Pc Dressing Post-op 20x10cm 600 400.00 240,000.00 386 0107 Pc Dressing Post-op 25x10cm 600 450.00 270,000.00 387 0115 Pack Ecg Clip On Electrodes 4's 10 3,500.00 35,000.00 388 0472 Roll Ecg Recording Paper, 50 X 30mm. 60 50.00 3,000.00 389 0116 Roll Ecg Recording Paper, 63 X 30mm. 600 100.00 60,000.00 390 0473 Roll Ecg Recording Paper, 80 X 20-30mm 30 600.00 18,000.00 391 0117 Pack Ecg Rubber Chest Bulbs With Metal 6's 10 4,500.00 45,000.00 392 0119 Pack Electrodes, Radioluscent, 50's 1,000 10.00 10,000.00 393 0561 Roll Gauze Absorbent 36x100yd, X-ray Detectable 120 1,200.00 144,000.00 394 0562 Pack Gauze Absorbent, Non-sterile 2x2x12ply, 100’s 900 50.00 45,000.00 395 0121 Pack Gauze Absorbent, Non-sterile 4x4x12ply, 100’s 5,000 150.00 750,000.00 396 0563 Pack Gauze Absorbent, Sterile 2x2x8ply, 100's 12,000 5.00 60,000.00 397 0122 Pack Gauze Absrobent, Sterile 4x4x12ply, X-ray Detectable 5's 50,000 20.00 1,000,000.00 398 0465 Box Gloves Non-sterile, Latex, Large, 100's 6,000 200.00 1,200,000.00 399 0456 Box Gloves Non-sterile, Latex, Medium, 100's 9,000 200.00 1,800,000.00 400 0457 Box Gloves Non-sterile, Latex, Small, 100's 9,000 200.00 1,800,000.00 401 0360 Box Gloves Surgical Sterile Powder-free Hypoallergenic 6.0, 50's 360 1,900.00 684,000.00 402 0126 Box Gloves Surgical Sterile Powder-free Hypoallergenic 6.5, 50's 1,080 1,900.00 2,052,000.00 403 0127 Box Gloves Surgical Sterile Powder-free Hypoallergenic 7.0, 50's 720 1,900.00 1,368,000.00 404 0128 Box Gloves Surgical Sterile Powder-free Hypoallergenic 7.5, 50's 720 1,900.00 1,368,000.00 405 0129 Box Gloves Surgical Sterile Powder-free Latex-free Hypoallergenic 6.5, 50's 12 4,250.00 51,000.00 406 0130 Box Gloves Surgical Sterile Powder-free Latex-free Hypoallergenic 7.0, 50's 12 4,250.00 51,000.00 407 0137 Pc Guedal Airway 0 50 30.00 1,500.00 408 0138 Pc Guedal Airway 1 90 30.00 2,700.00 409 0139 Pc Guedal Airway 2 750 30.00 22,500.00 410 0140 Pc Guedal Airway 3 750 30.00 22,500.00 411 0141 Pc Guedal Airway 4 400 30.00 12,000.00 412 0142 Bot Hand Disinfectant, Propan-2-ol, Propan-1-ol Mecetronium Ethylsulfate, 1l 125 2,000.00 250,000.00 413 0572 Bot Hand Disinfectant, Ethanol And Propan-1-ol, 1l 500 1,200.00 600,000.00 414 0503 Pc Hot Water Bag, With Cloth Wrap 90 100.00 9,000.00 415 0146 Bot Humidifier Oxygen, Sterile Water, 340ml 3,000 175.00 525,000.00 416 0147 Bot Hydrogen Peroxide 3%, 120ml 450 200.00 90,000.00 417 0482 Pc Ice Bag, Adult 100 100.00 10,000.00 418 1080 Pc Ice Bag, Pedia 50 100.00 5,000.00 419 0785 Pc Infant Neonatal Phototherapy Eye Care Mask 30 200.00 6,000.00 420 0786 Pc Intubating Stylet, Fr. 06 50 50.00 2,500.00 421 0787 Pc Intubating Stylet, Fr. 10 50 50.00 2,500.00 422 0156 Pc Intubating Stylet, Fr. 14 125 50.00 6,250.00 423 0371 Sachet Lubricating Jelly, 0.5 Grams 18,000 5.00 90,000.00 424 0478 Pc Manual Vacuum Aspirator 6 1,500.00 9,000.00 425 0166 Pc Mask Face N95 Medium 3,000 150.00 450,000.00 426 0167 Pc Mask Face N95 Small 4,500 100.00 450,000.00 427 0171 Pc Mask Oxygen Non-rebreathing, Adult 2,500 50.00 125,000.00 428 0172 Pc Mask Oxygen Non-rebreathing, Pedia 900 50.00 45,000.00 429 0479 Pc Mask Oxygen With Rebreather, Adult 900 50.00 45,000.00 430 0174 Pc Medicine Cup With 30cc Calibration 9,000 50.00 450,000.00 431 0609 Pc Mucus Strap Extractor Fr. 05 50 100.00 5,000.00 432 0789 Pc Mucus Strap Extractor Fr. 08 50 100.00 5,000.00 433 0483 Pc Mucus Strap Extractor Fr. 12 150 120.00 18,000.00 434 0173 Kit Maternity Kit: Cloth Bag With A Loop Handle That Contains The Gcgmmc Logo Front Side With The Mantra "so Gallares, So Kind" Labeled "maternity Kit" On The Back Side Contents Placed Inside The Bag With Zipper 1 - Pair Of Gloves Powder-free Elbow-length 6.5 1 - Pair Of Gloves Powder-free Elbow-length 7.0 5 - Pair Of Gloves Powder-free 6.5 1 -pair Of Gloves Powder-free 7.0 2 - Safety Syringe, 3ml 1 - Safety Syringe, 10ml 5-gauze 4x4 Sterile 1- Cord Clamp Sterile 1- Cotton Ball 2-alcohol Swabs 1- Detergent Powder At Least 75grams 1-underpad 1,500 1,200.00 1,800,000.00 435 0183 Pc Mucus Strap Extractor Fr. 14 450 120.00 54,000.00 436 0184 Pc Nebulization Kit With Mask, Nozzle And Tubings, Adult 500 50.00 25,000.00 437 0611 Pc Nebulizer With Tubing (mask And Nozzle), Adult 1,050 50.00 52,500.00 438 0612 Pc Nebulizer With Tubing (mask And Nozzle), Pedia 1,050 50.00 52,500.00 439 0795 Box Needle Disposable Im G. 16 1" Preferably With Safety Features 100’s 5 150.00 750.00 440 0185 Box Needle Disposable Im G. 18 1½” Preferrably With Safety Features 100’s 600 150.00 90,000.00 441 0186 Box Needle Disposable Im G. 19 1½” Preferrably With Safety Features 100’s 600 150.00 90,000.00 442 0187 Box Needle Disposable Im G. 21 1” With Safety Features 100’s 600 250.00 150,000.00 443 0188 Box Needle Disposable Im G. 23 1” With Safety Features 100’s 600 250.00 150,000.00 444 0189 Box Needle Disposable Im G. 24 1” Preferrably With Safety Features 100’s 5 150.00 750.00 445 0796 Box Needle Disposable Im G. 25 1" Preferrably With Safety Features 100’s 5 150.00 750.00 446 0190 Box Needle Disposable Im G. 26 1” Preferrably With Safety Features 100’s 150 150.00 22,500.00 447 0614 Box Needle Microfine Pen G.23 X 4mm 15 1,500.00 22,500.00 448 0192 Kit Newborn Kit: 1 - Cloth Bag With Loop Handle That Contains The Gcgmmc Logo Front Side With Mantra "so Gallares, So Kind" Labeled "newborn Kit" On The Back Side Contents Placed Inside The Bag With Zipper 2 - Cotton Balls 1 - Pair Of Gloves Powder-free 6.5 1 - Syringe, 1ml - 1 - Syringe Insulin G.31, 6mm 1 - Infant Reusable Diaper 1 - Digital Thermometer With Calibration Certificate 1 - Baby Bonnet 3,000 700.00 2,100,000.00 449 0623 Pack Paper Towel At Least 175 Pulls 4,500 40.00 180,000.00 450 0194 Box Pediatric Urine Collector 100’s 15 350.00 5,250.00 451 0198 Pc Philadelphia Collar Large 30 1,500.00 45,000.00 452 0199 Pc Philadelphia Collar Medium 30 1,500.00 45,000.00 453 0200 Pc Philadelphia Collar Small 30 1,500.00 45,000.00 454 0201 Tube Plaster Adhesive 300 3,000.00 900,000.00 455 827401 Pc Permicath With Stylet And Splitting Needle Fr. 1 X 20cm 25 15,000.00 375,000.00 456 0626 Roll Plaster Adhesive Zinc Oxide 1.25cm X 5m 300 300.00 90,000.00 457 0627 Roll Plaster Adhesive Zinc Oxide 2.5cm X 5m 300 400.00 120,000.00 458 0193 Kit Patient's Kit Contents: 1 Cloth Bag With A Handle In Green With Printed Gcgmmc Logo With Mantra On The Front And Doh Programs At The Back 1-bath Soap, 25 Grams 1-tooth Brush With Hospital Logo 1-210cc Calibrated Drinking Glass With Hospital Logo 1-alcohol 70% Isopropyl 60ml 1-2ply Toilet Paper Roll 1-toothpaste Sachet, 10 Grams 1-digital Thermometer With Plastic Case (to Include Calibrated Certificate Of Thermometer) 1-rubber Slipper Size 8 6,000 500.00 3,000,000.00 459 0628 Roll Plaster Adhesive Zinc Oxide 5cm X 5m 900 600.00 540,000.00 460 0629 Roll Plaster Adhesive Zinc Oxide 7.5cm X 5m 1,000 900.00 900,000.00 461 1082 Roll Plaster Paper Tape, 1.25cm X 9.1m 300 100.00 30,000.00 462 0202 Roll Plaster Paper Tape, 2.5cm X 9.1m 100 150.00 15,000.00 463 0203 Roll Plaster Plastic Tape, 2.5cm X 9.1m 1,000 150.00 150,000.00 464 0204 Roll Plaster Plastic Tape, 5cm X 9.1m 600 175.00 105,000.00 465 0205 Roll Plaster Plastic Tape, 7.6cm X 9.1m 1,000 250.00 250,000.00 466 0206 Roll Plaster Silk Tape, 2.5cm X 9.1m 100 200.00 20,000.00 467 0207 Bot Polyhexanide Wound Irrigating Solution, 350ml 600 900.00 540,000.00 468 0213 Pack Povidone Swab Sticks, 3’s 1,800 100.00 180,000.00 469 0214 Pc Probe Disposable Adult Compatible With Existing Pulse Oximeter 250 500.00 125,000.00 470 0484 Pc Probe Disposable Pedia Compatible With Existing Pulse Oximeter 250 500.00 125,000.00 471 0215 Pc Probe Disposable Neonate Compatible With Existing Pulse Oximeter 180 500.00 90,000.00 472 0216 Pc Resuscitator Bag Disposable, Silicone With Container, Adult 600 1,100.00 660,000.00 473 0217 Pc Resuscitator Bag Disposable, Silicone With Container, Neonate 150 1,100.00 165,000.00 474 0218 Pc Resuscitator Bag Disposable, Silicone With Container, Pedia 180 1,100.00 198,000.00 475 0349 Pc Shoe Cover, Ankle Length, Disposable 700 250.00 175,000.00 476 0455 Pc Spirometer 300 250.00 75,000.00 477 0251 Pc Stopcock 3-way Disposable With Extension Tubing 7,800 50.00 390,000.00 478 0252 Pc Suction Connecting Tube 8,500 75.00 637,500.00 479 0389 Bot Surface Disinfectant Spray 300 800.00 240,000.00 480 0660 Pack Surface Disinfectant Wipes, At Least 100 Pulls 1,000 1,200.00 1,200,000.00 481 0255 Pc Surgical Clipper Blade 1,500 400.00 600,000.00 482 1081 Box Syringe 1ml No Needle, Sterile, Individually Packed Disposable, 100's 600 800.00 480,000.00 483 1006 Box Syringe 3ml No Needle, Sterile, Individually Packed Disposable, 100's 2,500 700.00 1,750,000.00 484 1009 Box Syringe 5ml No Needle, Sterile, Individually Packed Disposable, 100's 2,500 900.00 2,250,000.00 485 1014 Box Syringe 10ml No Needle, Sterile, Individually Packed Disposable, 100's 2,000 1,050.00 2,100,000.00 486 0295 Box Syringe 20ml No Needle, Sterile, Individually Packed Disposable, 50's 1,200 500.00 600,000.00 487 0296 Box Syringe 50-60ml No Needle, Sterile, Individually Packed Disposable, 25's 1,200 500.00 600,000.00 488 0293 Pc Syringe Asepto With Bulb 5,500 30.00 165,000.00 489 0665 Box Syringe Disposable Insulin G. 31, 6mm, 100’s 600 900.00 540,000.00 490 0823 Pc Tape Measure 100 10.00 1,000.00 491 0241 Pc Thermometer Digital With Calibration Certificate 1,000 200.00 200,000.00 492 0458 Pc Tourniquet Rubber Latex 600 10.00 6,000.00 493 0299 Kit Tracheostomy Care Kit: 1pc- Moisture-proof Drape 1pair- Vinyl Gloves 4pc- 4" X 4" And 4-ply Premium Gauze Sponges 1pc- Bristle Brush 1pc- Disposable Forcep 1pc- Premium Tracheostomy Dressing 250 350.00 87,500.00 494 0394 Pc Tracheostomy Dressing 360 100.00 36,000.00 495 0305 Pc Tube Duodenal Silicone Fr. 10 300 300.00 90,000.00 496 0399 Pc Tube Duodenal Silicone Fr. 12 300 300.00 90,000.00 497 0306 Pc Tube Duodenal Silicone Fr. 14 600 300.00 180,000.00 498 0307 Pc Tube Duodenal Silicone Fr. 16 3,000 300.00 900,000.00 499 0372 Pc Tube Endotracheal Size 2.5, Uncufed 100 40.00 4,000.00 500 0373 Pc Tube Endotracheal Size 3.0, Uncuffed 600 40.00 24,000.00 501 0374 Pc Tube Endotracheal Size 3.5, Uncuffed 600 40.00 24,000.00 502 0375 Pc Tube Endotracheal Size 4.0, Uncuffed 300 40.00 12,000.00 503 0376 Pc Tube Endotracheal Size 4.5, Uncuffed 100 40.00 4,000.00 504 0377 Pc Tube Endotracheal Size 5.0, Cuffed 300 40.00 12,000.00 505 0378 Pc Tube Endotracheal Size 5.5, Cuffed 300 40.00 12,000.00 506 0379 Pc Tube Endotracheal Size 6.0, Cuffed 300 40.00 12,000.00 507 0380 Pc Tube Endotracheal Size 6.5, Cuffed 300 40.00 12,000.00 508 0381 Pc Tube Endotracheal Size 7.0, Cuffed 1,200 40.00 48,000.00 509 0382 Pc Tube Endotracheal Size 7.5, Cuffed 1,800 40.00 72,000.00 510 0641 Pc Tube Endotracheal Size 8.0, Cuffed 10 40.00 400.00 511 0303 Pc Tube Feeding Fr. 5 100-120cm 1,200 50.00 60,000.00 512 0304 Pc Tube Feeding Fr. 8 100-120cm 1,500 50.00 75,000.00 513 951466 Pc Umbilical Vein Catheter Fr. 4.0 X 37cm 150 600.00 90,000.00 514 517115 Pc Umbilical Vein Catheter Fr. 6.0 X 37cm 150 600.00 90,000.00 515 0363 Pc Underpad 3,000 20.00 60,000.00 516 0383 Pc Urine Bag, 2000ml Reservoir 2,100 50.00 105,000.00 517 0320 Pc Urine Meter With Needle Free Sample Port 240 1,000.00 240,000.00 518 0444 Pc Vacuum Delivery System With Palm Pump 60 5,000.00 300,000.00 519 0321 Box Wooden Stick Applicator 1000’s 300 250.00 75,000.00 520 0322 Box Wooden Tongue Depressor Sterile, 100's 120 100.00 12,000.00 521 0323 Box Wristlet, Adult (white), 100’s 60 350.00 21,000.00 522 0324 Box Wristlet, Pedia (blue), 100’s 60 350.00 21,000.00 523 0325 Box Wristlet, Pedia (pink), 100’s 60 350.00 21,000.00 Sub-total 50,414,950.00 Total Batch 1 157,645,850.00 Batch 2 S/n Unit Item Qty Unit Cost Total Cost 1 Pc Polysulfone Low Flux Dialyzer 1,000 916.50 916,500.00 2 Pc Polysulfone High Flux Dialyzer 1,000 933.40 933,400.00 3 Pc Av Fistula Needle (arterial) 10,000 22.75 227,500.00 4 Pc Av Fistula Needle (venous) 10,307 22.78 234,794.00 5 Pc Hemobloodlines 10,390 182.00 1,890,980.00 6 Cann Premix Solution (bicarbonate Concentrate): 5 Liters In Cannisters 15,000 253.50 3,802,500.00 7 Cann Premix Solution (acid Concentrate): 5 Liters In Cannisters 15,000 253.50 3,802,500.00 8 Gal Disinfectant For The Machine (inside) 200 4000.00 800,000.00 9 Gal Disinfectant For The Dialyzer 200 4547.40 909,480.00 10 Sack Industrial Salt 100 455.00 45,500.00 11 Tube Residual Test Strip 100/tube 40 1154.40 46,176.00 12 Tube Potency Test Strip 100/tube 40 2598.70 103,948.00 13 Pc Ultrapure Dialysate Filter 120 9097.40 1,091,688.00 14 Pc Df Filter 30 9097.40 272,922.00 15 Kit Fistula Kit: 1pc Syringe Disposable 20cc, 1 Pc Needle G 23 With Safety Feature, 1 Pair Gloves Surgical Sterile Powder-free Hypoallergenic S 7.0, 1pc Dental Bib, 2pcs. Cherry Balls, 1 Pack Gauze Absorbent, Sterile 4x4x8ply, 5', 3pcs. Chlorhexidine Prep Pad 6,000 550.00 3,300,000.00 16 Pack Subclavian Catheter On Pack: 1 Pair Nitrile Gloves Medium, 1 Pc Syringe Disposable Without Needle, 1 Pair Gloves Sterile Powder-free Hypoallergenic S7.0, 1 Pc Underpad, 2 Pcs 10cc Syringe Without Needle, 2 Pcs 3cc Syringe Without Needle, 1 Pack Gauze Absorbent, Sterile 4x4x8 Ply 5’, 1 Pack Povidone Swab Stick Of 3 2,500 550.00 1,375,000.00 17 Pack Subclavian Catheter Off Pack: 1 Pair Nitrile Gloves Medium, 1 Pair Gloves Surgical Sterile Powder-free Hypoallergenic 7.0, 1 Pc 10cc Syringe, 1 Pc 3cc Syringe, 1 Pack Gauze Absorbent, Sterile 4x4x8ply 5’, 2 Pcs Heplock, 1 Set Transparent Film Dress 10cm X 12 Cm 2,500 550.00 1,375,000.00 Notes: End-user Requirements: 1. Items Shall Be Delivered Within 10 Days. 2. Reported Defective Items Shall Be Replaced By The Supplier For Safety And Quality Assurance. 3.the Institution Must Be Allowed To Exchanged Products That Are About To Expire Up To At Least 3 Months Before Expiration Date. 4.guarantee Letter That Supports End-user Requirements No.2 & 3 Upon Delivery. 5.certificate Product Registration / Coe / Certificate Of Renewal/cmdn. Sub-total 21,049,614.00 18 Bag Capd/dpca 2 Stay Safe Link Peritoneal Dialysis Solution 2.3% 2l 180 300.00 54,000.00 19 Bag Capd/dpca 2 Stay Safe Link Peritoneal Dialysis Solution 1.5% 2l 720 300.00 216,000.00 20 Pc Peritoneal Dialysis Extension Catheter (40cm) 12 1840.00 22,080.00 21 Pc Catheter Adaptor Luer-lock With Closure Cap 4 480.00 1,920.00 22 Pc Peritoneal Dialysis Organizer 2 1400.00 2,800.00 23 Pc Disinfection Cap 900 26.00 23,400.00 Notes: End-user Requirements: 1. Item Shall Be Delivered Within 10 Days. 2. Reported Defective Items Shall Be Replaced By The Supplier For Safety And Quality Assurance. 3. The Institution Must Be Allowed To Exchange Products That Are About To Expire Up To At Least 3 Months Before Expiration Date. 4. Guarantee Letter That Supports End-user Requirements No.2 & 3 Upon Delivery. 5. Certificate Product Registration/coe/certificate Of Renewal/cmdn Sub-total 320,200.00 Total Batch 2 21,448,088.00 Grand Total Batch 1 & 2 179,015,664.00

Details: Description Lot A 23 Box Clearbook, A4 Size (piece)refillable, Material: Plastic, Cover: Opaque Plastic, Dimension: 310mm X 235mm (min.), Thickness: 0.5mm (min.), Pocket: Transparent Plastic, Number Of Pockets: Twenty (20), Thickness: 0.04 Mm (min.), Color: Assorted ( Black, Blue, Red, Yellow) 23 Box Clearbook, Legal Size (piece) Refillable, Material: Plastic, Cover: Opaque Plastic, Dimension: 345mm X 235mm (min.), Thickness: 0.04mm (min.), Color: Assorted ( Black, Blue, Red, Yellow) 30 Piece Eraser, Plastic/rubber (piece) Rectangular, Dimension (l X W X T) (min.): Equivalent Volume Of 8,350mm3 422 Piece Sign Pen, Extra Fine Tip, Black (piece) Ink Color: Black, Type: Liquid Or Gel, Tip: 0.5mm, Needle Type, One (1) Piece Barrel (non-refillable), Writing Length: One (1) Km (min) 172 Piece Sign Pen, Fine Tip, Black 182 Piece Sign Pen, Medium Tip, Black (piece) , Black (piece) Ink Color: Black, Type: Liquid Or Gel, Tip: 0.7mm, Needle Type, One (1) Piece Barrel (non-refillable), Writing Length: One (1) Km (min) 43 piece Sign Pen, Medium Tip, Blue(piece) , Blue(piece) Ink Color: Blue, Type: Liquid Or Gel, Tip: 0.7mm, Needle Type, One (1) Piece Barrel (non-refillable), Writing Length: One (1) Km (min) 1 pack "wrapping Paper, Kraft, Weight: 65gsm (-5%), Size: Width: 914.4mm (36"") (-3mm), Length: 1,219.4mm (48"") (-3mm)" 25 pack  Battery, Dry Cell, Size Aa (pack) 1.5 Volts, Alkaline, Minimum Of Thirty (30) Minutes Runtime With A Current Draw Of 1.0 Amp Until Cut-off At One (1) Volt 19 pack  Battery, Dry Cell, Size Aaa (pack)1.5 Volts, Alkaline, Minimum Of Thirty (30 Min.) Runtime With A Current Draw Of 0.5 Amp Until Cut-off At One (1) Volt, Shelf Life: Five (5) Years (min) From Date Of Acceptance 19 Bottle Ink, For Stamp Pad (bottle) Volume (min): 50ml, With Applicator, Shall Conform With The Required Perfamnce Test: Dry Time, Stability Test, Resistance To Water, Effect On Rubber Stamp, Corrosion Of Stamp-pad Container 2 Unit Digital Voice Recorder, Built-in Memory: 4gb (expandable), Channel: Stereo, Recording & Playback Format: Mp3, Wma, Earphone Jack, Built-in Microphone, Usb Connectivity, Battery Life 20 Hours (min) (recording Mode, Mp3 128kbps 2 Unit Fire Extinguisher, Dry Chemical, Capacity In Terms Of Mass Of Extinguisher Medium: 4.5kg (10lbs), Purity Of The Chemical: 75% (min.), Duration Of Discharge: 10 Seconds (min.) 5 Piece Philippine National Flag (piece) Type: 1, Size: Length: 1,828.8mm (6') (-3mm), Width: 914.4mm (3') (-3mm), Material: 100% Polyester, With Certificate Of Accreditation From National Historical Commission Of The Philippines (nhcp) 4 Unit "external Hard Drive (unit) Capacity: 1tb, Weight: 181 G - 205 G, Storage Media: 2.5""sata Hdd, Rotational Speed: 5400 Rpm, System Requirements: 1. Ms Windows 7, Ms Windows 8, Ms Windows 10, Mac Os 10.7 Or Later, Linux Kernel 2.6.31 Or Later, Antivirus: Pre-installed Antivirus (optional), Accessories: With Usb 3.0 Cable And Product Manual In English" 17 Piece Flash Drive (piece) 64gb Capacity 7 Unit Computer Mouse, Wireless (unit)connection Type: Usb, Tracking Method: Optical, Resolution: 1,000 Dpi (min), High-definition Optical: 2.5x More Responsive Than Standard Optical Mouse, 1000dpi High Technology Delivers Smoother, More Accurate Cursor Control 15 Piece Light-emitting Diode (led) Light Bulb, 7 Watts, Power Consumption: 7 Watts (max), Color Temperature: 6,500 Kelvin, Lumen Output: Not Less Than 530 Lumens, Frequency Rating: 60hz, Color Rendering Index: 80 +/-10%, Input Voltage: 220-240 Volts, Ac, Socket Base: E27, Light Color: Cool Daylight, Power Factor: Not Less Than 0.90, Average Life: Not Less Than 15,000 Hours, Operating Temperature: ≥ 35°c 73 jar Glue, All-purpose (bottle) Gross Weight (min.): 200 Grams, Free Formaldehyde(max.): 0.1%, Adhesive Strength - No Slippage On Pasted Part, Solid Content (min.): 30%, Ph: 4 To 8,container: Plastic Jar, Cap: Plastic Non-stick Easy Open Twist Top, With Tapered Applicator Attached To The Cap 42 box Staple Wire, Heavy Duty (binder Type), 23/13, Type: Chisel Point, Thickness: 0.60mm (-0.05), Width: 13mm (0.20), Leg Length: 13mm (-0.30), Number Of Staples Per Strip:100, Number Of Staples Per Box: 1,000, Binding Capacity: 40-90 Sheets Of 70gsm Multi-purpose Paper 201 box Staple Wire, Standard (box) 5000 Wires Per Box, Dimensions, In Mm: (see Fig. 1), Width (w): 12.70 +0.15mm/-0.20mm, Leg Length (l): 6.00 +0.50mm/-0.20mm, Thickness (d): 0.40 + 0.05mm, Width (e): 0.50 + 0.05mm, Number Of Wires Per Strip: 100 (min) 12 roll Tape, Electrical, Made Of Polyvinyl Chloride (pvc), Width: 18mm (min.), Length: 16 Meters (min.), Assorted Colors 36 roll Tape, Masking, 24mm (roll)width: 24mm (+1mm), Usable Length: 50 Meters, Adhesion Strength: 8.5n/24mm Width (min), Breaking Strength: 65n/24mm Width (min) 68 roll Tape, Masking, 48 Mm (roll) Width: 48mm (+1mm), Usable Length: 50 Meters, Adhesion Strength: 8.5/24mm Width (min), Breaking Strength: 65n/24mm Width (min) 70 roll Tape, Packaging, 48 Mm (roll) Color: Tan, Width: 48mm (+1mm), Usable Length: 50 Meters, Base Material: Biaxially-oriented Polypropylene, Adhesion Strength: 6n/24mm (min), Breaking Strength: 14n/24mm (min) 52 roll Tape, Transparent, 24mm (roll) Width: 24mm (+1mm), Usable Length: 50 Meters, Base Material: Biaxially-oriented Polypropylene, Adhesion Strength: 6n/24mm (min), Breaking Strength: 14n/24mm (min) 69 roll Tape, Transparent, 48 Mm (roll) Width: 48mm (+1mm), Usable Length: 50 Meters, Base Material: Biaxially-oriented Polypropylene, Adhesion Strength: 6n/24mm (min), Breaking Strength: 14n/24mm (min) 11 roll Twine, Plastic (roll) Weight Per Roll (min.): 1000g, Breaking Strength(min.): 25kg 20 piece Ruler, Plastic, 450mm (piece) Transparent/clear, Ruler Scale: Millimeters, Centimeters, Inches, Clear And Sharp Ruler Scales, Width: 38mm (min), Thickness: 1.30mm (min) 14 unit Calculator, Compact (unit) Width: 100mm - 130mm, Lcd Display, Capacity: 12 Digits, Two Way Power Source (solar And Cell) 10 boc Clip, Backfold, 15mm 87 box Clip, Backfold, 19mm (box) All Metal, Clamping Length: 19mm (-1mm), Clamping Depth: 10mm (min.), Thickness Of Metal: 0.20mm (min.), Diameter Of Clip Handles: 1.0mm (min.) 94 box Clip, Backfold, 25mm (box) All Metal, Clamping Length: 25mm (-1mm), Clamping Depth: 13mm (min.), Thickness Of Metal: 0.22mm (min.), Diameter Of Clip Handles: 1.20mm (min.) 36 box Clip, Backfold, 32mm (box) All Metal, Clamping Length: 32mm (-1mm), Clamping Depth: 14mm (-1mm) Thickness Of Metal: 0.30mm (min.), Diameter Of Clip Handles: 1.45mm (min.) 26 box Clip, Backfold, 50mm (box) All Metal, Clamping Length: 50mm (-1mm), Clamping Depth: 25mm (-1mm), Thickness Of Metal: 0.33mm (min.), Diameter Of Clip Handles: 1.85mm (min.) 252 piece Correction Tape (piece) Disposable, Dispensing Mechanism: Gear Type, Dispensing System: Single Line Tape 21 piece Cutter/utility Knife, For General Purpose (piece) Length: 100mm (+2mm), Width: 16mm (+2mm) Thickness: 0.40mm (+0.02mm) 85 piece Data File Box (piece) Outside Dimension: Width: 125mm (min), Height: 230mm (min), Length: 400mm (min), Material: Chipboard: 3mm Thick (min) 53 piece Data Folder (piece) Dimension: Width: 75mm (min), Height: 230mm (min), Length 380mm (min), Material: Chipboard: 2,5mm Thick (min) 11 piece Dater Stamp (piece) With Locking Mechanism, With Self-inking Stamp, With Removable And Refillable Ink Pad, Single Color, Size Of Imprint: 30mm X 45mm (min) 9 box Envelope, Documentary, A4 (box) 14 box Envelope, Documentary, Legal, (box) Size: 254mm X 381mm (-2mm), Basis Weight: 150gsm (-5%), Thickness (min.): 0.22mm 12 box Envelope, Expanding, Kraft (box) Legal Size: 380mm X 250mm (-3mm), Expansion: 50mm (-3mm), Thickness (min.): 0.38mm 4 box Envelope, Expanding, Plastic (box) 10 box Envelope, Mailing (box) 13 piece Eraser, Felt, For Blackboard/whiteboard (piece) Overall Size (l X W X T) (min.): 125mm X 45mm X 19mm 30 box Fastener, Metal (box) Thickness: Base With Prongs And Compressor: 0.30mm (min.), Material: As Per Sample Provided, Able To Hold 25mm Thick Of Multipurpose Paper (70gsm), 70mm Between Prongs 43 piece File Organizer, Expanding, Plastic, Legal (piece) With 12 Inside Pockets With Index Tab, For Legal Size Paper /documents, Dimension (min.): Cover (flap): Width: 220mm Length: 380mm Thickness: 0.60mm, Inside Pocket: Width: 230mm Length: 360mm Thickness: 0.12mm 49 pack "file Tab Divider, A4, For 210mm X 297mm (a4 Size) Documents, Size (min): Leaf: Length: 297mm Width: 210mm Tab: Length: 65mm Width: 12mm, Basis Weight: 153gsm (-5%), Thickness: 0.22mm (min.) " 37 pack Folder, L-type, Legal, Materials: Plastic, Size: 235mm X 346mm (min.) Thickness: (min.): 0.17mm, Transparent For Easy Identification Of Contents, Assorted Colors 3 box "folder, Pressboard (box) • Material: Heavy Duty Paper Board • Size: 369mm X 242mm (-smm) • Thickness: 0.40mm (min.) • Basis Weight: 312gsm (min.) • Color: Cream, Green Or Maroon, Etc. • Accordion-pleat Gusset: Latex Paper/pvc Bookbinder/book Cloth/paper Cloth, Color: Green, Red, Blue, Expansion: 39mm (-3mm)" 1 pack Folder With Tab, A4, Material: Tagboard/carrier/foldcote/cupstock Board, Leaf Dimension: 240mm X 320mm (+1mm), Tab: 13mm (+2mm), Scoring: 20mm From Edge Of Forlder (+2mm), Other Physical Properties: Grammage G/m²:308 (-5%), Thickness, Mm:0.35 (min), Tearing Resistance, Mn, Md + Cd 2940 (min), Stiffness, Mn.m, (taber) Md + Cd: 13 (min) 45 pack Folder With Tab, Legal (pack) Material: Tagboard/carrier/foldcote/cupstock Board, Leaf Dimension: 240mm X 320mm (+1mm), Tab: 13mm (+2mm), Scoring: 20mm From Edge Of Forlder (+2mm), Other Physical Properties: Grammage G/m²:308 (-5%), Thickness, Mm:0.35 (min), Tearing Resistance, Mn, Md + Cd 2940 (min), Stiffness, Mn.m, (taber) Md + Cd: 13 (min) 27 box "index Tab (box) Transparent, Self-adhesive, Assorted Colors, Five (5) Sets Per Box, One (1) Set Composed Of 2-pieces 6"" Tab Strip And Two (2) Complete Alphabets" 40 piece Magazine File Box, Large, Material: Chipboard: 3mm Thick (min.), Leatherette Paper For Outside Cover, Coated Paper For Inside Cover, Outside Dimension: :width: 110mm (min), Height: 265mm (min), Length: 220mm (min) 36 set Marker, Flourescent (set) Barrel: Flat, Tip: Chisel Point, Color: Three (3) Assorted Colors Per Set, Material And Structure: The Barrel And The Cap Shall Be Made Of Plastic And The Cap Shall Fit Snugly Or Firmly To The Barrel And Of Such Structure That Will Easily Cap And Uncap, Quality: Writing Performance: Flourescent Marker Shall Continuously Highlight On Multipurpose Paper For A Distance Of At Least 100 Meters Under Normal Pressure And Shall Not Show Noticeable Change In Ink Intensity. Cap-off Time: 45 Minutes (min) 225 piece Marker, Permanent, Black (piece) Ink Color: Black, Tip: Felt, Bullet Type, Point: Medium, Structure: The Barrel And The Cap Shall Fit Snugly Or Firmly To The Barrel And Os Such Structure That Shall Easily Cand And Uncap 80 piece Marker, Permanent, Blue (piece) Ink Color: Blue, Tip: Felt, Bullet Type, Point: Medium, Structure: The Barrel And The Cap Shall Fit Snugly Or Firmly To The Barrel And Os Such Structure That Shall Easily Cand And Uncap 86 piece Marker, Whiteboard, Black (piece) Ink Color: Black, Blue, Red, Tip: Felt, Bullet Type, Structure: The Barrel And The Cap Shall Fit Snugly Or Firmly To The Barrel And Of Such Structure That Shall Easily Cand And Uncap 19 piece Marker, Whiteboard, Red, Ink Color: Red, Tip: Felt, Bullet Type, Structure: The Barrel And The Cap Shall Fit Snugly Or Firmly To The Barrel And Of Such Structure That Shall Easily Cand And Uncap 76 box Paper Clip, Vinly/plastic Coated, 33mm (box) Wire Diameter: 0.80mm (min), Length Of Clip: 33mm (min), Total Length Of Wire Used: 102mm (min), Assorted Colors 100 Box Paper Clip, Vinly/plastic Coated, Jumbo, 50mm (box) Wire Diameter: 1.0mm (min), Length Of Clip: 50mm (min), Total Length Of Wire Used: 155mm (min), Assorted Colors 19 Box Pencil, Lead/graphite, With Eraser, Hardness: Hb Or 2, Lead/graphite Diameter: 2mm (min), Wood Casing: Softwood, Coated, Free From Defects As Cross Grains, Interlocked Grains, Warpage Knots And The Like; And Shall Permit Easy Sharpening 11 Piece Pencil Sharpener, Table Mountable Type, With Metal Clamp, Single Cutter-head, One Hole Guide, 9-10mm In A Diameter, All Main Parts Shall Be Made Of Metal Particularly The Cutting Mechanism Cutter,pinion Gear,internal Gear,handle 23 Piece Puncher, Paper, Heavy Duty (piece) Punching Capacity: 30 Sheets Of 70gsm Multipurpose Paper, With Two Hole Guide, Diameter Of Hole: 7mm (approx) 19 Box Rubber Band No. 18 (box) 35o Grams (min) (net Weight), Thickness: 1.00mm (min), Lay Flat Length: 70mm (min), Tensile Strength: 9.81mpa (min), Elongation: 250% (min) 31 Piece Stamp Pad, Felt (piece) Thickness Of Felt: 5mm (min.), Thickness Of Metal: 0.20mm (min.), Stamp Bed Size: Width: 60mm (min.), Length: 100mm (min.) 68 Pair Scissors, Symmetrical/asymmetrical (pair) Overall Length: 160mm (min), Length Of The Cutting Blade: 70mm (min), Thickness Of The Cutting Blade: 1.70mm (min), Length Of Metal Handle (measured From The Center Of The Binding Rivet Screw To The Tip Of The Metal Handle): 35mm (min) 37 Piece Stapler, Standard Type (piece) Loading Capacity: 200 Staples (min), One Time Binding Capacity Of 2-20 Sheets Multi-purpose Paper (70gsm)r 6 Unit Stapler, Heavy Duty (binder) (unit) Type: Desktop, High Capacity/volume, Compatible With The Following Staple Sizes: 13mm And 17mm, Material: Body: Metal, Bases Grip: Non-skid Durable Material, Stapling Capacity: 25-135 Sheets Of 70gsm Multi-purpose Paper, Load Capacity: 100 Staples (min), Throat: Depth: 65mm (min) With Adjustable Paper Guide, Dimension: Manufacturer's Standard 9 Piece Tape Dispenser, Table Top (piece) Net Weight (min.): 1.2kg, Body Made Of Rigid Plastic, Smooth Finish: Weighted, Serrated Cutting Blade Thickness: 0.40mm +0.03mm, Holds Rolls Up To 24mm Wide On 75mm Core, Assorted Color 17 Pack Cartolina, Assorted Colors (pack) Bristol Board, Size: 572mm X 724mm (-3mm), Basis Weight: 100gsm (min.), Thickness: 0.12mm (min.), Assorted Colors: Blue, Green, Yellow, Orange, Lavender, Violet, Gold And Pink, Minimum Of Four (4) Colors 158 Pad "notepad, Stick-on, 50mm X 76mm (pad) Size: 50mm X 76mm (2"" X 3"") (min), Basis Weight: 70gsm (min), Sheet Thickness: 0.09mm (min), Assorted Colors" 175 Pad "notepad, Stick-on, 76mm X 100mm (pad) Size: 76mm X 100mm (3"" X 4"") (min), Basis Weight: 70gsm (min), Sheet Thickness: 0.09mm (min), Assorted Colors" 98 Pad "notepad, Stick-on, 76mm X 76mm (pad) Size: 76mm X 76mm (3"" X 3"") (min), Basis Weight: 70gsm (min), Sheet Thickness: 0.09mm (min), Assorted Colors" 153 Piece Steno Notebook (piece) Basis Weight: 55gsm (-5%) Bond, Thickness: 0.075mm (min), Size: 150mm X 225mm, (min), Top Margin: 25mm (min.), Bottom Margin: 5mm, Number Of Spaces: 22 (min), Cover Thickness: 0.40mm (-0.02mm), 40 Leaves, Ruled Both Sides 40 Bond Paper , Legal, 70 Gsm 40 Ream Bond Paper , A4, 70 Gsm 591 Ream Paper, Multicopy A4 (ream) Basis Weight: 80gsm (-3%), Size: A4, 210mm X 297mm (+2mm In Either Direction), Trim Sizes Shall Be Along Machine Direction Or Long Grain 156 Ream Paper, Multicopy Legal (ream) Basis Weight: 80gsm (-3%), Size: Legal, 216mm X 330mm (+2mm In Either Direction), Trim Sizes Shall Be Along Machine Direction Or Long Grain 419 Ream Paper, Multipurpose A4, Basis Weight: 80gsm (min.), Size: Legal, 216mm X 330mm (+2mm In Either Direction), Trim Sizes Shall Be Along Machine Direction Or Long Grain 93 Ream Paper, Multipurpose Legal, Basis Weight: 80gsm (min.), Size: Legal, 216mm X 330mm (+2mm In Either Direction), Trim Sizes Shall Be Along Machine Direction Or Long Grain 15 Box Paper, Parchment, Size: 210mm X 297mm (+2mm In Either Direction), Basis Weight: 80gsm (-5%), Fine Translucent, Suitable For Laser/inkjet Printing 48 Book Record Book, 300 Pages (book) Basis Wieght: 55gsm (-5%), Thickness: 0.07mm (minimum), Size: L X W: 265mm X 165mm (minimum), Cover Material: Laminated Chipboard, Thickness: 1.5mm (minimum) Size: L X W: 278mm X 175mm (minimum), Margins Top: 25mm (-2mm), Bottom: 8mm (+4mm), Left / Right: Manufacturer's Standard 37 Book "record Book, 500 Pages (book) Basis Weight: 55 Gsm (-5%) Thickness 0.07 Mm (minimum) Size L X W: 265mm X 165mm (minimum) Cover Material Laminated Chipboard Thickness 1.5mm (minimum) Size L X W: 278mm X 175mm (minimum) Margins Top 25mm (-2mm) Bottom 8mm (±4mm) Left / Right Manufacturer’s Standard" 35 Cart Ink Cartridge, Epson C13t664100 (t6641), Black 30 Cart Ink Cartridge, Epson C13t664200 (t6642), Cyan 30 Cart Ink Cartridge, Epson C13t664300 (t6643), Magenta 30 Cart Ink Cartridge, Epson C13t664400 (t6644), Yellow 1054 piece Ballpen 36 pack Sticker Paper , A4, Matte, White, 10 Pcs/pack 21 pack Sticker Paper , Legal, Matte, White, 10 Pcs/pack 25 roll Double Sided Tape 31 pack Photo Paper, A4 Size, Glossy, 10 Sheets/pack 15 packs Photo Paper Legal 4 bottle Disinfectant Bleaching Solution, 3.78 Lit 67 piece Certificate Frame, A4, Orientation: Landscape, Pvc Black 195 piece Certificate Holder, A4, Plastic 1 unit Microphone 74 box Plastic Fastener, Size: Regular (50pcs/box) 14 box Plastic Fastener, Size: Long 2 piece Extension Cord 2 pack Push Pin 12 piece Glue Stick (paste) 5 pack Glue Stick (for Glue Gun) 2 unit Ergonomic Chair, (midback Synthetic Leather Finished Office Chair- Padded Steel Armrest With Heavy Duty Base With Nylon Caster Wheels, With Pneumatic Gaslift For Height Adjustment) 1 unit Executive Chair (for Fo Head) 2 unit Glue Gun 2 unit Speakers 113 bottle Ink Cartridge, Epson 003 Yellow 109 bottle Ink Cartridge, Epson 003 Magenta 109 bottle Ink Cartridge, Epson 003 Cyan 131 bottle Ink Cartridge, Epson 003 Black 10 bottle Ink Cartridge, Hp Gt52 Yellow 10 bottle Ink Cartridge, Hp Gt52 Magenta 10 bottle Ink Cartridge, Hp Gt52 Cyan 10 bottle Ink Cartridge, Hp Gt53 Black 18 bottle Ink, Brother, Black, Btd60bk, 108ml 9 bottle Ink, Brother, Cyan, Bt5000c, 48.8ml 9 bottle Ink, Brother, Yellow, Bt5000c, 48.8ml 6 bottle Ink, Brother, Magenta, Bt5000c, 48.8ml 37 bottle Ink Refill, Epson Ink 001, Black, 127ml 29 bottle Ink Refill, Epson Ink 001, Cyan, 65ml 29 bottle Ink Refill, Epson Ink 001, Magenta, 65ml 29 bottle Ink Refill, Epson Ink 001, Yellow, 65ml 5 Box Sign Pen, Uniball-impact Gel, Ruber Grip, Steel Point, Water-based Pigment Gel Ink 1.0% Ball, Approx 0.6% Line, 12 Pcs/box 58 Piece Sign Penm Black, Gel 0.7mm 12 Piece Sign Pen, Ink Refill, 0.5, My Gel 3 Meter Pdx Loomex Wire 2 Cart Tonner (5501i, No. Tk6309) 12 Packs Notarial Seal Box Notarial Seal (gold), No. 23, 25pcs/box 1 Piece Glass Top Corner Table 2 Piece Steel Filing Cabinet Four Drawers, Vertical 15 Packs Specialty Board, A4 21 Pad Sign Here Sticky Note Pad 30 Packs Specialty Paper, A4 Lot B 58 Bottle Alcohol, Ethyl, 500 Ml, 68% - 72% Ethyl Alcohol, Fully Miscible In Water, Flip-top Cap, Scented 49 Gallon Alcohol, Ethyl, 1 Gallon, , Strength: 68% - 72%, Volume: 1 Gallon, Bottle: Hdpe 51 Can Air Freshener (can) Aerosol Type, Net Content: 150g (min), Assorted Scents (at Least Three (3) Scents), Long Lasting Fragrance (scent Trace Lingers For Atleast 5 Min.) 10 Piece Broom (walis Tambo) (piece)weight: 500 Grams (max), Handle: Plastic Coated Aluminum Tube, Diameter Of Handle: 19mm (min), Length Of Handle: 545mm (min), Dry Weight Of The Tiger Grass: 200grams (min), Usable Length Of Tiger Grass: 300mm (min), With Upper Stitch: 20 (min) Lower Stitch: 30 (min) 5 Piece Broom (walis Ting-ting) (piece) Made Of Mature Coconut Midribs, Standard Size (min.): 140mm Grip, Measured 150mm From The Top,usable Length (min.): 760mm, Rib Count (min.): 350 Pieces 55 Bottle Cleaner, Toilet Bowl And Urinal (bottle) Color: Cear Or Blue, Net Content: 900ml - 1000ml In Rigid Plastic Bottle, Not Chlorine Based, Viscosity: 114cp At 25°c Min Using Ostwald Method 15 Bar Detergent Bar (piece) Net Weight: 140 Grams As Packed (-2.5%) 30 Pouch Detergent Powder, All-purpose, 1kg, Net Weight: One (1) Kilogram (-2.5%) 51 Can Disinfectant Spray (can) Aerosol Type, Net Content Per Can: 400 Grams (min), Crisp, Clean Scent 11 Piece Dust Pan (piece) Made Of Rigid Non-breakable Plastic, With Detachable Handle: Diameter (min.): 30mm, Length (min.): 600mm, Base (min.): Thickness: 1.25mm, Front Width: 260mm, Back Width: 200mm, Depth: 225mm 13 Can "furniture Cleaner (can) Aerosol Type • For All Types Of Surfaces Such As Furniture, Cabinets And Countertops, Vinyl And Leather, Etc. • Net Content (min.): 300mi Per Can • Pleasant Smell. • Sufficient Amount Of Propellant To Totally Expel Content. • Shelf Life: Must Have A Shelf Life Of At Least Twenty-four (24) Months From The Date Of Manufacture But Not Less Than Eighteen (18) Months From The Date Of Delivery" 48 Bottle Hand Soap, Liquid, 500ml (bottle) Mild Scented, Bactericidal/germicidal Property, Individual Packed Plastic Bottle, Packaging: Standard Packaging Of The Manufacture 1 Unit Mop Bucket, Heavy Duty, Hard Plastic, Material: Hard Palstic, Approximate Size (min.), Width: 370mm Length: 475mm Height: 245mm, Capacity: 30 Liters 4 Piece Mophandle, Heavy Duty, Screw Type, Screw Type, With Metal Mop Head Clipper, Aluminum Handle: Thickness (min.): 0.70mm, Outside Diameter: 22mm To 25mm Length (min.): 1.5 Meters 10 Piece Mophead, Made Of Rayon, 36 Stands Per Head (min), 3 Ply's Per Stand, 40 Threads Per Ply, Weight:400 Grams (min), Length: 410mm (min), Length Of Band: 170mm (min), Breaking Strength, Kg: 126 (min) 5 Kilo "rags All Cotton (bundle) Diameter: 178mm (7"") (approx.) Minimum Of Thirty-two (32) Pieces To A Kilogram, Assorted Colors" 7 Pack Scouring Pad (pack) Made Of Synthetic Nylon, 150mm X 200m (min.), Thickness (min.): 8mm, Color: Green 56 Pack/roll "trashbag, Xxl Size (roll/pack) Color: Black, Dimension: 940mm X 1016mm (-6mm) (37"" X 40""), Thickness: 0.02mm (min), Tensile Strength At Break: Astm D882, One Way: 15n/mm² (min), Other Way: 12n/mm² (min), Elongation At Break: Astm D882, One Way: 400% (min), Other Way: 600% (min)" 54 Pack/roll Trashbag, Large Size (roll/pack) 29 Pack/roll Trashbag, Xl Size (roll/pack) 19 Piece Wastebasket, Non-rigid Plastic, Made Of Rigid Plastic, Thickness (min.): 1.20mm, Height (min.): 225mm, Full Volume (up To The Lid): 8.5 Liters (min.), Assorted Colors 44 bottle Dishwashing Liquid Lemon/calamansi 25 pcs Dishwashing Paste, 200g 34 Pack Tissue, Interfolded Paper Towel (pack) Basis Weight: 34gsm (+/-2gsm), Sheet Dimension: Width Of Sheet: 200mm (+3mm), Length Of Sheet: 200mm (+3mm), Total Number Of Sheets Per Pack: 150 Pulls, Interfolded, Number Of Ply: One (1) Ply 164 Pack Toilet Tissue Paper, 2 Ply (pack) , 100% Recycled, 12 Rolls Per Pack, Weight: 28gsm (min.), Sheet Dimension: Width Of Sheet: 100mm (+/-3mm), Length Of Sheet: 114mm (-5mm) 18 Bottle Hand Sanitizer (bottle) Form: Liquid Or Gels, Volume: 500ml, Hypoallergenic, Non-drying, Bottle: Pump Dispenser Plastic, Fda Certificate Of Product Registration/notification 20 Can Insecticide (can) Aerosol, Kerosene Based, Quick Kill Contact And Residual Type, Cautionary Scent/odor Required, Multi-insect Killer, Net Content Per Can: 600ml (min.) 41 piece Toilet Deodorant Cake, Assorted, 100grms 6 Pcs Doormat Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx