Bureau Of Fisheries And Aquatic Resources Region Iii Tender

Description Hdpe Milkfish Broodstock Cages With Broodstock Net, Cover Net And Egg Collector 2 Unit Inclusion And Specification: -delivery, Labor, Installation And Mobilization Included A. Hdpe Fish Cage Frame (refer To The Attached Plan For Details) - 11 Meter Inside Diameter -with 12 Expanded Poly Styrene (eps Styro) -mobilization And Demobilization -made With 100% Virgin Pure Grade Pe100 Raw Material -injection Moulded Brackets With Dost Material Composition Test Report -completely Zero-metal Design, Zero Corrosion And No Metal Nuts And Bolts -with Cover Net Rope Slot, 30 Cm Height (refer To The Attached Plan For The Design) Other Specification: Inner And Outer Floater Pipe- Floater Size: 250 Mm (1o") Thickness: S 14.8 Mm Thick, Sdr17 Material: Pure Grade Marine Material With Anti-uv To Slowdown The Natural Oxidation Due To Excessive Sunlight And Saltwater,must Be Guaranteed High Grade "virgin Resin" Pe 100 Length Per Piece: 10 Meters, With Expanded Poly Styrene Insert. Stopper- Four (4) Pieces Stopper Per Stanchion, All Welded Not Fused, Welded Using Special Extrusion Machine And Is Made Of The Same Pipe Or Hdpe Material Stanchion And Bracket: Fourteen (14) Pieces Stanchion And Bracket. No Metal Screw. Bracket Thickness: 15 Mm (+/-) Bracket Size: 250 Mm, -must Be Guaranteed Injection Molded Pe100-250 Mm Brackets With Logo, -each Brackets Must Be Thick, Have Long Neck And Built With Four Wide Support Braces To Keep The Stanchion Straight And In Position. -must Be Equipped With Front And Rear "bump Guard" To Avoid Outside Force Damage. -the Iiner Part Of The Bracket Must Be Filled With Support Pillars To Make The Bracket More Stronger. Warranty: Ten (10) Year Product Warranty On The Supplied Hdpe Fish Cage Parts And Accessories, Excluding All Nets, Ropes, Egg Collector And Other Non-hdpe Accessories Note: -no Wood And Metal Screw Design B. Breeder Net - 400/15 Ply, Mesh Size #10, Knotted Polyethylene Square Mesh -dimension: 11 Meter Diameter X 4 Meter Depth -rope Frame #12 And #7 C. Cover Net -400/12 Ply, 10k, Knotted Polyethylene -dimension: 11 Meter Diameter -with Rope Frame # 14 D. Concrete Net Weight -atleast 7 To 10 Kilograms Approximate Weight E. Milkfish Egg Collector -refer To The Attached Plan -stainless Steel Shaft -stainless Steel Egg Sweeper -plug And Play Bearing Design -easy To Assemble And Dismantle Design -sweeper Edge Equipped With Rubber Pad For Smooth And Clean Swipe On Cage End -sweeper Frame With Catwalk Accessories For Milkfish Egg Collector (refer To The Attached Plan) A. G.i Pipe Trusses Frame A.1. Steel Trusses (g.i):1" A.2. Shaft Rotator: 1 1/4" A.3. Catwalk Frame (g.i): 1 1/2" A.4. Stanchion (g.i): 1" A.5: Trusses Support (g.i): 3/4" B. Shaft Rotator B.1. Rotating Lever (g.i): 1 1/4" B.2. Shafting Assembly (g.i): 1 1/2" B.2.1 Lock Bolt: 10 Mm B.3. Shaft Housing Assembly (g.i): 3" C. Egg Sweeper -egg Sweeper Frame (stainless): 1 1/4 Tubular, Adjustable (see Attached Plan For The Dimension 5 M X 1 Meter, 5.20 Mm) C.1. Shaft Frame Connection-upper Corner (refer To The Plan) C. 2 Shaft Frame Connection-lower Connection (refer To The Plan) C. Egg Sweeper C.3. Rubber Matting Connection (refer To The Plan) D. Egg Collector (refer To The Plan For The Design, Side View And 3d View) D.1 Fine Mesh Net D.2. Alaskin Net/cloth D.3. Stainless Ring With Clip D.4. Stainless Ring With Clip D.5. Sweeper Frame E. Sweeper Post Assembly (hdpe) (refer To The Attached Plan For The Cross Section And 3d View) E.1. Inner Tube: Hdpe 250 Mm Sdr17 E.2. Outer Tube: Hdpe 250 Mm Sdr17 E.3. Bracket: Injection Moulded 250 Mm E.4. Tee Joint Hdpe E.5. Catwalk Base (with Lock) E.6. Catwalk Post Assembly: Hdpe 125 Mm F. Sweeper Support Assembly (see Attached Plan For The Design) F.2. Support Pipe Attached To Upper Frame (g.i): 1" F.3: Tee Hdpe:110 Mm Egg Collector Warranty: Covered By A Six (6) Months Workmanship Warranty Summary Of Product Warranty -the Supplier Must Provide Ten (10) Year Product Warranty On Supplied Hdpe Fish Cage Parts And Accessories Excluding All Nets, Ropes, Egg Collector And Other Non -hdpe Accessories -egg Collector Must Be Covered By A Six (6) Months Workmanship Warranty -all Materials Used Must Be New, In Perfect Condition And Has Gone Through Strict Production Quality Control And Testing -warranty Period Start On The Date Of Issued Sales Invoice -warranty Coverage: Replacement Or Repair On The Damage Component -one (1) Year Workmanship Warranty -warranty Per Item Hdpe Broodstock Cage- Ten (10) Year Product Warranty, One (1) Year Workmanship Warranty Egg Collector- Six (6) Months Workmanship Warranty All Types Of Nets, Ropes And Other Non-hdpe Accessories-no Warranty